Miele Vacuum Cleaner S 4212 S 4782 User Manual

Operating instructions  
Vacuum cleaners  
S 4000 Series  
To avoid the risk of accidents or damage  
to the appliance, it is essential to read these  
instructions before using it for the first time.  
en - GB  
These operating instructions apply to  
standard models S 4212 - S 4782 as well as to  
other S 4000 series vacuum cleaners  
which are distinguished by names rather than numbers.  
M.-Nr. 07 345 550  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Disposal of packing material  
Disposal of your old appliance  
The transport and protective packing  
Before disposing of your old appliance  
has been selected from materials which remove the dustbag and all the filters  
are environmentally friendly for disposal and dispose of them with your normal  
and should be recycled.  
household waste.  
Ensure that any plastic, wrappings,  
bags etc. are disposed of safely and  
kept out of the reach of babies and  
young children. Danger of suffocation.  
Electrical and electronic appliances  
often contain materials which, if  
handled or disposed of incorrectly,  
could be potentially hazardous to  
human health and to the environment.  
They are, however, essential for the  
correct functioning of your appliance.  
Please do not therefore dispose of it  
with your household waste.  
Disposing of the dustbag and  
filters  
These are made from environmentally  
friendly materials, and can be disposed  
of with the normal household waste, as  
long as they have been used  
exclusively for general household dust.  
Please dispose of it at your local  
community waste collection / recycling  
centre or contact your dealer for  
advice.  
Ensure that it presents no danger to  
children while being stored for  
disposal.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
The illustration shows the maximum number of features available on these Miele  
vacuum cleaners.  
Certain models are supplied as standard with the following accessories which are  
not illustrated on this page.  
– Classic Allergotec floorhead  
– Turbobrush  
– ACCU NOVA floorhead  
These floorheads and brushes are supplied with their own operating instructions.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
aHandle (some models have an air inlet valve in the handle) *  
bSuction power selector + / - *  
cStand-by button for pauses in vacuuming *  
dLED *  
eRelease button  
fAccessories holder  
gRelease buttons for the telescopic tube *  
hDust compartment release button  
iTelescopic tube *  
jHyClean dustbag  
kCarrying handle  
lFloorhead *  
mParking attachment  
nDust compartment filter (for motor protection)  
oExhaust filter *  
pSuction power selector *  
qStand-by indicator *  
rOverheating warning light , *  
sExhaust filter change indicator (Re-set button) *  
tMains cable  
uFoot switch for automatic cable rewind  
vPark system  
wOn/Off foot switch s  
xDustbag change indicator  
yConnection socket  
zSuction hose  
Those features marked * depend on the model, and may vary or not be available  
on your model.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Correct application  
This vacuum cleaner meets statutory  
safety requirements. Improper use  
can, however, lead to personal injury  
and material damage.  
This vacuum cleaner must only be  
~
used for domestic household purposes  
to vacuum dry floor surfaces. Do not use  
on people or animals.  
To avoid the risk of accidents and  
damage to the vacuum cleaner,  
read these instructions carefully  
before using it for the first time. They  
contain important notes on its safety,  
operation and maintenance.  
Any other usage, modification or  
alteration is at the owner's risk and could  
be dangerous.  
The manufacturer cannot be held liable  
for damage resulting from improper or  
incorrect use of the appliance.  
Keep these instructions in a safe  
place and ensure new users are  
familiar with the content. Pass them  
on to any future owner.  
This appliance is not intended for  
~
use by persons (including children)  
with reduced physical, sensory or  
mental capabilities, or lack of  
experience or knowledge, unless they  
are supervised whilst using it or have  
been shown how to use it correctly by a  
person responsible for their safety.  
Always disconnect the vacuum  
cleaner from the mains supply when  
you have finished using it, as well as  
for maintenance work and cleaning.  
Switch it off at the wall socket and  
unplug it. If using the ACCU NOVA  
powerbrush, switch this off as well.  
Safety with children  
This vacuum cleaner is not a toy! To  
~
avoid the risk of injury, keep children  
well away, and do not allow them to  
play with it or to use the controls.  
Supervise children whilst you are using  
it.  
Older children may only use the  
~
vacuum cleaner if its operation has  
been clearly explained to them, and  
they are able to use it safely,  
recognising the dangers of incorrect  
use.  
Models with radio controls on the  
~
handle: Keep batteries out of the reach  
of children.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Technical safety  
If the cable is damaged it must be  
~
replaced together with a complete  
Ensure that the connection data on  
~
cable rewind. For safety reasons this  
must only be done by the Miele Service  
Department or a Miele authorised ser-  
vice technician.  
the data plate (voltage and frequency)  
match the mains electricity supply. It is  
essential that they match to avoid  
damage to the appliance.  
While the vacuum cleaner is under  
~
The plug must be fitted with a 13 A  
~
fuse (UK).  
guarantee, repairs should only be  
undertaken by a service technician  
authorised by Miele. Otherwise the  
guarantee will be invalidated.  
Before using the vacuum cleaner,  
~
check for any signs of damage. Do not  
use a damaged appliance: it could be  
dangerous.  
Repairs should only be carried out  
~
by a Miele authorised service  
There is a metal inlay underneath  
technician. Repairs and other work by  
unqualified persons could be  
~
the handle which is designed to avoid  
the unpleasant effects of electrostatic  
discharges. Please make sure that you  
keep your hand in constant contact with  
this metal strip during vacuuming.  
dangerous. The manufacturer cannot  
be held liable for unauthorised work.  
It is important to switch the vacuum  
~
cleaner off before changing over  
Do not pull or carry the vacuum  
accessories and floorheads, especially  
~
cleaner by the cable and be careful not an Electro- or Turbobrush.  
to damage the cable when withdrawing  
Do not let the vacuum cleaner get  
~
wet. Clean only with a dry cloth or  
the plug from the socket.  
Keep the cable away from sharp edges  
and do not let it be squashed, for  
example, under a door.  
slightly damp cloth when disconnected  
from the mains supply. If moisture gets  
into the appliance, there is a risk of  
electric shock.  
Avoid running the vacuum cleaner over  
the cable.  
This could damage the cable, plug or  
socket and pose a safety hazard. The  
appliance must not be used if any of  
these have suffered damage.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Correct use  
Do not vacuum up items which are  
~
heavy, hard or have sharp edges. They  
To avoid the risk of damage, do not  
~
could cause a blockage and damage  
the appliance.  
use the vacuum cleaner without the  
dustbag, dust compartment filter and  
exhaust filter in place. Otherwise it  
could get damaged.  
Floor attachments, accessories and  
~
tubes must not be used at head level to  
avoid the risk of injury, e.g. to eyes and  
ears.  
If a dustbag is not inserted, the dust  
~
compartment cover does not normally  
close. Do not force it.  
Monitor the change dustbag  
~
indicator and change the dustbag if  
necessary. Check the exhaust and dust  
compartment filters at the same time  
and change them too if necessary. A  
full bag or blocked filter will reduce the  
suction power of the cleaner. A  
temperature limiter switches the  
vacuum cleaner off automatically if it  
gets too hot. See "Problem solving  
guide".  
Do not vacuum up any water, liquid  
~
or damp dirt. This will cause major  
faults and could seriously impair the  
functioning and electrical safety of the  
appliance. Wait until any freshly  
cleaned or shampooed carpets or floor  
coverings are completely dry before  
attempting to vacuum.  
Do not vacuum toner dust. Toner,  
~
such as that used in printers and  
Important information on the  
~
photocopiers, can conduct electricity.  
The filter system in the vacuum cleaner  
may not filter it completely, causing the  
handling of batteries (for models with  
radio controls on the handle):  
toner to be blown back into the room by – Do not use rechargeable batteries.  
the fan.  
– Do not short circuit or recharge  
Do not vacuum up anything which  
batteries, or throw them into a fire.  
Danger of explosion.  
~
has been burning or is still glowing e.g.  
cigarettes, ashes or coal, whether  
glowing or apparently extinguished.  
The cleaner might catch fire.  
– Disposing of batteries: Remove the  
batteries from the radio control  
handle and dispose of them in your  
recycling bin. Do not dispose of them  
with the normal household waste.  
Do not vacuum up any inflammable  
~
or combustible liquids or gases and do  
not vacuum in areas where such  
substances are stored. The cleaner  
might explode.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Accessories  
Miele accessories including  
floorheads, filters and dustbags are  
available to order from your Miele  
retailer, the Miele Spare Parts  
Department or via the internet on  
To avoid the risk of injury when  
~
vacuuming with a Miele Electrobrush or  
Turbobrush, do not touch the rotating  
roller brush.  
It is not advisable to vacuum directly  
~
with the handle, i.e. without an  
accessory attached as the rim could  
get damaged and you could hurt  
yourself on sharp edges.  
Miele dustbags are disposable and  
~
intended to be used only once. Do not  
attempt to re-use. Blocked pores  
reduce the efficiency of the cleaner.  
Use only genuine Miele dustbags,  
~
filters, accessories and optional  
accessories. This will ensure optimum  
performance of the appliance  
throughout its life.  
The manufacturer cannot be held  
liable for damage caused by  
non-compliance with these Warning  
and Safety instructions.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for use  
Attaching the suction hose  
^ Insert the hose connector into the  
socket until it clicks into position. To  
do this, line up the guides on the two  
pieces.  
To remove the suction hose  
from the cleaner  
^ Press the release buttons at the side  
of the hose connector, and lift the  
hose from the socket.  
Connecting the handle to the  
suction tube  
^ Insert the handle into the suction tube  
until it clicks into position. To do this,  
line up the guides on the two pieces.  
^ To release the handle from the  
suction tube, press the locking button  
(see arrow) and pull the handle away  
from the suction tube.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for use  
Your vacuum cleaner is fitted with one  
of the following types of suction tube,  
depending on the model:  
– 2-part telescopic tube  
– Triscopic telescopic tube  
Adjusting the telescopic  
suction tube  
One part of this telescopic tube is  
packed inside the other and can be  
adjusted to suit your height for  
comfortable vacuum cleaning.  
^ Press the telescopic tube release  
button (see arrow) to release the tubes  
and adjust to the required height.  
Adjusting the triscopic suction  
tube  
The triscopic tube has three sections.  
Two sections of the telescopic tube are  
packed together inside a third outer tube.  
^ Press the release button (see arrow  
a) to release the lower tube and pull  
it right out until it clicks. Press the  
button again when you want to retract  
the tube again. The tube will click into  
place.  
^ Press the telescopic tube release  
button b to release the tubes and  
adjust to the required height.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for use  
Fitting the standard floorhead  
^ Push the suction tube into the  
floorhead and turn it clockwise or  
anti-clockwise until it clicks into  
position.  
^ To release the floorhead from the  
suction tube, press the locking button  
(see arrow) and pull the suction tube  
away from the floorhead.  
The floorhead can be used for all normal  
cleaning of carpets and rugs. It can also  
be used with the brush protruding to  
vacuum hard flooring. For hard flooring,  
such as stone and parquet, we  
recommend using one of the special  
Miele floor brushes (see "Optional  
extras").  
It is also important to observe the  
flooring manufacturer’s cleaning and  
care instructions.  
Vacuum carpets and rugs with the  
brush retracted:  
^ Press the foot switch ö.  
Clean hard flooring which is not  
susceptible to scratching with the brush  
protruding:  
^ Press the foot switch ä.  
The Classic Allergotec floorhead, the  
ACCU NOVA floorhead and the  
Turbobrush  
Some models may be supplied as stan-  
dard with one of these accessories (see  
"Optional accessories"). Please refer to  
the separate operating instructions  
supplied with these brushes for  
instructions on use and maintenance.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the accessories supplied  
The following accessories are supplied:  
aDusting brush  
bUpholstery nozzle  
cCrevice nozzle  
dAccessory holder for the above  
accessories  
Symbols on the holder show where to  
attach the different accessories.  
Crevice nozzle  
For cleaning in folds, crevices or  
corners.  
Dusting brush  
(supplied with some models)  
For cleaning skirting boards, ornate or  
carved articles, etc.  
The head of the dusting brush can be  
swivelled to attain the best cleaning  
position.  
Dusting brush with natural  
bristles  
(supplied with some models)  
This brush is suitable for particularly  
delicate objects.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the accessories supplied  
Upholstery nozzle  
For cleaning upholstery, mattresses,  
cushions, curtains, covers etc.  
Accessories holder  
^ Attach the accessories holder to the  
suction tube.  
Floorhead  
For general use and also for vacuuming  
the stairs.  
For safety reasons when vacuuming  
stairs it is best to start at the bottom  
of the stairs and move upwards.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Mains cable  
Unwinding the cable  
^ Pull out the mains cable to the  
required length (max. approx. 5.5 m).  
Warning: If vacuuming for longer  
than 30 minutes, the mains cable  
must be pulled out to its fullest  
extent. Otherwise there is a danger  
of overheating and damage.  
Rewinding the cable  
^ Switch off at the wall socket and  
remove the plug.  
^ Press the rewind foot switch. The  
cable will rewind automatically.  
Switching on and off  
^ Step on the On-Off foot switch s.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Models with radio controls  
Certain models have controls on the  
handle which transmit radio signals to  
the vacuum cleaner. The stand-by  
indicator on the vacuum cleaner will  
light up when the vacuum cleaner is  
ready to use.  
To pause the appliance during  
operation:  
^ Press the stand-by button on the  
handle.  
Warning: The stand-by button is  
designed to pause the vacuum  
cleaner for short periods of time  
whilst vacuuming. After vacuuming  
the device has to be switched off  
and unplugged from the mains  
supply.  
An LED will indicate each time a button  
is pressed on the handle.  
At the end of the pause you can do one  
of the following:  
^ Press the stand-by button again to  
switch the vacuum cleaner back on  
at the setting you were using before  
pausing it.  
^ Press the + button to switch the  
vacuum cleaner back on using the  
highest power setting.  
^ Press the - button to switch the  
vacuum cleaner back on using the  
lowest power setting.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Vacuuming  
Regulating the suction  
^ When vacuuming, pull the cleaner  
behind you on its wheels. You can  
stand it upright for vacuuming stairs  
and curtains etc.  
The suction power can be regulated to  
suit the type of flooring. The higher the  
wattage, the more powerful the suction.  
Reducing the suction power reduces  
the amount of effort required to  
Warning: When vacuuming  
manoeuvre the floorhead.  
especially fine dust, e.g. sawdust,  
sand, plaster, flour, talcum powder  
etc., electrostatic charges build up  
naturally. Under certain conditions  
these charges will be released. To  
avoid the unpleasant effects of these  
discharges, a metal inlay has been  
incorporated into the underside of  
the handle. Please make sure that  
you keep your hand in constant  
contact with this metal strip during  
vacuuming.  
Some models also have symbols on the  
controls. The symbols indicate the type  
of use the settings are suitable for.  
a - curtains, lightweight fabrics  
b - upholstery, cushions  
c - carpets, rugs and runners  
( - for daily energy-saving vacuuming  
e - lightly soiled rugs and fitted  
carpets  
f - heavily soiled hard flooring, and  
for intensive cleaning of carpets  
The controls vary from model to model.  
The different options are carried out in  
sequence.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Rotary selector  
^ Turn the suction power selector  
manually to the suction power setting  
you require.  
+ / - foot controls  
Press the controls to select the suction  
power you require.  
^ Press the + control to select a higher  
setting.  
^ Press the - control to select a lower  
setting.  
+ / - controls on the handle  
(radio-operated)  
Press the control until the suction power  
you require shows in the display on the  
cleaner.  
^ Press the + control to select a higher  
setting.  
^ Press the - control to select a lower  
setting.  
An LED will indicate each time a button  
is pressed on the handle.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Opening the air inlet valve  
(not on models with radio-controls on  
the handle)  
It is easy to reduce the suction power  
for a short time, e.g. to prevent rugs or  
other objects being sucked into the  
vacuum cleaner.  
^ Open the air inlet valve far enough to  
reduce the suction power.  
The floorhead will be easier to  
manoeuvre. Close the valve up again  
when you are ready to use full power  
again.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting down, transportation and storage  
Parking system  
A parking system has been designed  
for conveniently parking the vacuum  
cleaner during pauses.  
^ Slot the floorhead into the parking  
attachment at the back of the  
vacuum cleaner.  
Transportation and storage  
^ Stand the vacuum cleaner upright  
when it is not being used and during  
storage.  
^ Slot the floorhead downwards into the  
parking attachment on the side of the  
vacuum cleaner.  
^ Retract the telescopic tube fully.  
This makes the cleaner easier to carry  
or store.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Purchasing new dustbags and  
filters  
Warning: Always disconnect the  
vacuum cleaner from the electrical  
supply for maintenance work and for  
cleaning. Switch off at the wall  
socket and remove the plug. If using  
the ACCU NOVA floorhead, switch  
this off as well.  
Original Miele dustbags and filters can  
be obtained from your Miele Dealer,  
from Miele and via the internet at:  
The Miele filter system consists of three  
filters which must be replaced from  
time to time to ensure that your cleaner  
performs efficiently.  
Only use original Miele F/J/M dustbags  
with a red collar. Using any other  
dustbags will damage the vacuum  
cleaner. Original Miele dustbags are  
identified by the "Original Miele" logo on  
the packaging or directly on the  
dustbag.  
– Dustbag  
– Exhaust filter  
– Dust compartment filter (for motor  
protection)  
Use only genuine Miele dustbags,  
filters, accessories and optional  
accessories. Only this will ensure  
that the suction power of the  
vacuum cleaner is maintained,  
giving the best possible cleaning  
results.  
Warning: The use of dustbags made  
from paper or paper-based  
materials, or dustbags with a  
cardboard collar, or dustbags that  
do not carry the "Original Miele"  
logo, can seriously damage the  
vacuum cleaner and invalidate the  
warranty.  
An Air Clean filter and a dust  
compartment filter are supplied with  
every packet of Miele dustbags.  
These can also be purchased  
separately.  
You can replace the exhaust filter fitted  
in the vacuum cleaner with one of the  
other Miele exhaust filters if you wish  
(see "Optional accessories").  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
When to change the dustbag  
Change the dustbag when the colour  
marker in the dustbag change indicator  
fills the display, or sooner if it is no  
longer effective (see possible reasons  
for this below).  
Dustbags are designed for single  
use only. Do not attempt to re-use  
them as suction would be reduced.  
Checking the dustbag change  
indicator  
^ Attach the standard floorhead to the  
suction tube. Do not use any of the  
other floorheads or attachments as  
they will cause the dustbag change  
indicator to give a false reading.  
How the dustbag change indicator  
works  
The dustbag change indicator is set for  
normal household dust. Normal  
household dust would contain a mixture  
of dust, hair, carpet fluff, threads, grit  
etc.  
^ Switch the vacuum cleaner on and  
select the highest power setting.  
^ Lift the floorhead off the floor a little. If However, if the vacuum cleaner has  
the marker completely fills the  
dustbag change indicator, you  
should replace the dustbag with a  
new one.  
been used to suck up fine dust, such  
as plaster, brick dust, cement or flour,  
the pores of the dustbag will become  
blocked very quickly. This affects the  
air permeability of the bag, and the  
marker will indicate that the bag is "full"  
even when it is not. If this happens you  
must still change the dustbag because  
suction power will be greatly reduced  
by blocked pores in the dustbag.  
If, on the other hand, you have  
vacuumed up a large amount of hair  
and carpet fluff which typically contains  
a lot of air, the indicator may fail to  
react even though the bag is full. You  
should still change it! Both these  
extremes can occur.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Replacing the dustbag  
^ Press the release button for the dust  
compartment lid and raise the lid as  
far as it will go.  
The dustbag has a closing flap which  
closes automatically when the dust  
compartment lid is raised to prevent  
any dust escaping.  
^ Pull the dustbag out by the grip next  
to the self-closing flap on the collar.  
^ Fit the new dustbag into the holder as  
far as it will go. Leave it folded up  
when you take it out of the box.  
^ It should be unfolded in the dust  
compartment.  
^ Close the dust compartment lid  
securely, making sure it clicks into  
position. Take care not to trap the  
dustbag when doing so.  
Warning: The lid will not close  
without a dustbag in place, or if the  
dustbag is incorrectly fitted. Do not  
use force!  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
When to change the exhaust  
filter  
Depending on the model, your vacuum  
cleaner will be fitted as standard with  
one of the following exhaust filters:  
a Air Clean filter  
Replace this filter every time you start a  
new packet of Miele dustbags. An Air  
Clean exhaust filter and a dust  
compartment filter are supplied with  
every packet of Miele dustbags.  
b Active Air Clean SF-AAC 50 (black)  
c Active HEPA SF-AH 50 (blue)  
These types of filter need to be  
changed approx. once a year. Make a  
note of the date on the filter.  
Exhaust filter change indicator  
Certain models are fitted with an  
exhaust filter change indicator (reset  
control) to show when to change your  
Active Air Clean b or Active HEPA c  
filter.  
The indicator lights up after approx. 50  
hours of operation which is equivalent  
to about a year of average use. You  
can continue vacuuming when the light  
comes on. However, the suction power  
will be reduced as will the effectiveness  
of the filter if it is not replaced in good  
time.  
The filter change indicator light is  
irrelevant if an Air Clean filter (a) is  
being used, as long as it is replaced  
every time a new packet of Miele  
dustbags is started. The indicator light  
will go out when the reset button is  
pressed.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Replacing the Air Clean filter  
Do not use more than one exhaust  
filter at a time.  
^ Open the dust compartment lid.  
^ Release the filter grille and raise it  
upwards. Grasp the used Air Clean  
filter by the clean, unsoiled section  
(see arrow) and take it out.  
^ Replace it with a new Air Clean filter.  
If you wish to replace the Air Clean  
filter with an Active Air Clean filter or  
with an Active HEPA filter see  
"Replacing one type of filter with  
another".  
^ Close the filter grille.  
^ Close the dust compartment lid  
firmly. It should click into place.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Replacing the Active Air Clean  
or Active HEPA filter  
Do not use more than one exhaust  
filter at a time.  
^ Open the dust compartment lid.  
^ Remove the exhaust filter.  
^ Fit the new exhaust filter in position.  
If you wish to replace the Active Air  
Clean filter or the Active HEPA filter  
with an Air Clean filter see  
"Replacing one type of filter with  
another".  
^ Close the dust compartment lid  
firmly. It should click into place.  
Re-setting the exhaust filter change  
indicator  
If your vacuum cleaner is fitted with an  
exhaust filter change indicator, this  
needs to be re-set each time the filter is  
replaced. To do this the vacuum  
cleaner must be connected to the  
electricity supply.  
^ Press the reset button.  
The exhaust filter change indicator  
goes out, and resets to zero.  
The filter change indicator can only  
be reset by pressing the reset  
button after the light has come on.  
Pressing the button at any other time  
will have no effect.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Replacing one type of filter  
with another  
Depending on the model, your vacuum  
cleaner will be fitted as standard with  
one of the following exhaust filters:  
a Air Clean filter  
b Active Air Clean SF-AAC 50 (black)  
c Active HEPA SF-AH 50 (blue)  
Please note  
1. If you wish to replace the Air Clean  
filter a with an Active Air Clean filter b or  
an Active HEPA filter c, it is essential  
that you remove the filter grille before  
fitting the new type of filter.  
2. If you wish to replace the Active Air  
Clean filter b or the Active HEPA filter c  
with an Air Clean filter a, then it is  
essential that you also fit a filter grille *.  
* Filter grille - see "Optional  
accessories".  
Do not use more than one exhaust  
filter at a time.  
The exhaust filter indicator light (with  
reset button) that is fitted on certain  
models is designed to come on  
when the Active Air Clean or Active  
HEPA filters need to be changed.  
The filter change indicator light is  
irrelevant if an Air Clean filter is  
being used, as long as it is replaced  
every time a new packet of Miele  
dustbags is started. The indicator  
light will go out when the reset  
button is pressed.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
When to change the dust  
compartment filter (for motor  
protection)  
Replace this filter every time you start a  
new packet of dustbags. A dust  
compartment filter is supplied with  
every packet of Miele dustbags.  
How to change the dust  
compartment filter  
^ Open the dust compartment lid.  
^ Unclip the filter frame.  
^ Take the old filter out.  
^ Replace it with a new one.  
^ Close the filter frame.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
When to change the battery in  
the radio-operated handle  
Approx. every 18 months. One 3 V  
battery (CR 2032) is required.  
The vacuum cleaner can still be  
used when the battery has run out or  
if there is no battery fitted.  
^ Switch the vacuum cleaner on using  
the On/Off foot control s. The  
vacuum cleaner is ready to use (in  
stand-by mode).  
^ Press the re-set button for the  
exhaust filter change indicator.  
The vacuum cleaner can continue to be  
used, but only at maximum power.  
How to change the battery in  
the radio-operated handle  
aRelease the battery compartment  
cover using a suitable tool, e.g. a  
screwdriver.  
bRemove the cover.  
^ Push the battery forwards to remove  
it. Then replace it with a new one,  
making sure the polarity is correct.  
^ Replace the cover.  
^ Dispose of the old battery responsibly.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
When to change the thread  
lifters  
The thread lifters on the suction inlet to  
the floorhead and upholstery nozzle  
can be replaced.  
Check them from time to time and  
replace them if the pile has worn down.  
To replace the thread lifters  
^ Use a knife or similar object to  
remove them from the slots.  
^ Fit the new thread lifters.  
Upholstery nozzle, 190 mm  
(supplied as standard, depending on  
model)  
^ Disengage the thread lifter unit at  
each side of the upholstery nozzle  
using a coin.  
^ Fit a new thread lifter unit and lock  
into position.  
If threads or hair have wound round  
the bearing on the floorhead roller:  
aRelease the bearing (with bayonet  
fitting) using a coin.  
bPress the bearing out, and remove.  
cTake out the roller.  
Remove any threads and hair, replace  
the roller and refit the bearing.  
Replacement parts are available from  
your Miele dealer or from Miele (see  
back cover for contact details).  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Warning: Always disconnect the  
vacuum cleaner from the electricity  
supply for maintenance work and for  
cleaning. Switch off at the wall  
socket and remove the plug. If using  
the ACCU NOVA floorhead, switch  
this off as well.  
Vacuum cleaner and accessories  
External surfaces of the vacuum  
cleaner and of the accessories can be  
cleaned with a dry or a slightly damp  
cloth, or with a proprietary cleaner  
suitable for plastic.  
Warning: Do not use abrasive  
cleaners, glass cleaners or  
all-purpose cleaners. Because of  
their chemical composition they  
could cause serious damage to  
plastic components.  
Dust compartment  
The dust compartment can, if  
necessary, be cleaned using a dry  
duster, brush or, if available, a second  
vacuum cleaner to vacuum the dust  
out.  
Warning: Do not let the vacuum  
cleaner get wet. If moisture gets into  
the appliance, there is a risk of  
electric shock.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide / After sales service  
The vacuum cleaner switches off  
automatically.  
On certain models, the overheating  
warning light also comes on.  
A temperature limiter switches the  
vacuum cleaner off automatically if it  
gets too hot. Some models also have a  
warning light , which comes on to  
indicate that it has overheated.  
This can occur if, for instance, large  
articles block the suction tube or when  
the filter bag is full or contains particles  
of fine dust. A heavily soiled exhaust or  
dust compartment filter can also be the  
cause of overheating. Switch off the  
vacuum cleaner using the On-Off  
switch s. Disconnect from the  
electricity supply. Switch off at the wall  
socket and remove the plug.  
After removing the cause, wait for  
approx. 20 - 30 minutes to allow the  
vacuum cleaner to cool down. It can  
then be switched on again.  
After sales service  
In the event of a fault that you cannot  
easily remedy, please contact  
– your Miele dealer, or  
– the nearest Miele Service  
Department. (See address on back  
page).  
N.B. A call-out charge will be  
Please note that telephone calls may  
be monitored and recorded for  
training purposes.  
applied for unnecessary service  
visits where the problem could have  
been rectified as described in this  
instruction manual.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
Miele accessories including floorheads, Parquet-3 floorbrush  
filters and dustbags are available to  
order from your Miele retailer, Miele or  
via the internet at:  
This brush has natural bristles and is  
designed for use on parquet floors and  
other surfaces which are susceptible to  
scratching such as laminate flooring.  
Parquet twister swivel-action  
floorbrush  
This brush is suitable for a variety of  
hard floor surfaces and has a swivel  
joint enabling it to get into awkward  
corners.  
Please observe the flooring  
manufacturer's cleaning and care  
instructions.  
Certain models are supplied as stan-  
dard with one or more of the following  
accessories:  
Parquet twister XL swivel-action  
floorbrush  
This brush is extra wide making it  
suitable for large areas of flooring and  
has a swivel joint enabling it to get into  
awkward corners.  
Floorheads / brushes  
ACCU NOVA-3 rechargeable  
powerbrush  
Other accessories  
The ACCU NOVA powerbrush is  
particularly suitable for intensive  
vacuuming of carpets which are  
subject to hard wear.  
MicroSet  
This set is specially designed for  
cleaning small objects and difficult to  
reach areas (such as PC keyboards,  
stereo equipment, intricately carved  
furniture and ornaments, models etc).  
Classic Allergotec-3 floorhead  
This floorhead is suitable for daily  
hygienic cleaning of all floor surfaces.  
Micro-hose with combination nozzle  
Turbo Comfort-3 turbobrush  
For cleaning awkward to reach places,  
such as vents and stereo equipment  
and also small intricate objects, such  
as model railways or cars.  
This turbobrush is ideal for cleaning cut  
pile carpet.  
Hardfloor-3 floorbrush  
CarClean Set Plus  
This brush is designed for use on hard  
flooring such as tiled or stone floors.  
For valeting the interior of cars.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
Hand-held mini Turbobrush  
Filters  
For cleaning upholstery, mattresses,  
car seats etc.  
Active Air Clean exhaust filter  
SF-AAC 30  
Universal brush  
This filter absorbs odours from the dirt  
collected in the dustbag.  
For dusting books, shelves, etc.  
Active HEPA filter SF-AH 30  
Dusting brush with natural bristles  
Excellent filtration level for the cleanest  
exhaust air. This filter is particularly  
suitable for allergy sufferers.  
This brush is suitable for particularly  
delicate objects.  
Radiator brush  
Filter grille  
For cleaning radiators, narrow shelves  
and crevices.  
The filter grille is required if you wish to  
fit an Air Clean filter instead of an Active  
Air Clean filter or an Active HEPA filter.  
Mattress nozzle  
For cleaning upholstery, mattresses,  
cushions, curtains, covers etc.  
Crevice nozzle, 300 mm  
For cleaning in folds, crevices and  
corners.  
Crevice nozzle, 560 mm  
For accessing awkward to reach areas.  
Upholstery nozzle, 190 mm  
For cleaning upholstery, mattresses,  
car seats etc.  
Flexible extension hose  
For extending the suction hose by  
approx. 1.5 m.  
Hygiene seal with active charcoal  
This prevents dust and odours  
escaping when the suction hose has  
been removed from the cleaner.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection for the UK  
All electrical work should be carried out  
by a suitably qualified and competent  
person in strict accordance with current  
national and local safety regulations  
(BS 7671 in the UK).  
The voltage and connected load are  
given on the data plate located  
underneath the vacuum cleaner. Please  
ensure that these match the household  
mains supply. The fuse rating is quoted  
on the plug.  
The appliance is supplied with a cable  
and moulded plug ready for connection  
to a 230-240 V/50 Hz a.c. single phase  
supply.  
Non-rewireable plugs BS 1363  
The fuse cover must be re-fitted when  
changing the fuse, and if the fuse cover  
is lost the plug must not be used until a  
suitable replacement is obtained. The  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is  
embossed in words on the base of the  
plug, (as applicable to the design of  
plug fitted).  
Replacement fuses should be ASTA  
approved to BS1362 and have the  
correct rating. Replacement fuses and  
fuse covers may be purchased from  
your local electrical supplier.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / (S4212- S4782) - 2610  
M.-Nr. 07 345 550 / 05  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Cooktop 2011 User Manual
Murray Lawn Mower 309007x8B User Manual
NEC Switch V850 SC1 User Manual
Nortec Industries Humidifier MES U User Manual
Nortel Networks Answering Machine P0886634 User Manual
Oki Automobile Alarm Vehicle Alarm User Manual
One for All Universal Remote URC 7562 User Manual
Oregon Scientific Blood Pressure Monitor BPW810 User Manual
Oregon Scientific Weather Radio WMR88 User Manual
Palsonic CRT Television 6159 User Manual