Operating Instructions
(For Copy & Network Scan Functions)
Digital Imaging Systems
Model No.
DP-8020E / 8020P / 8016P
Before operating this machine, please carefully read this manual, and keep this
documentation in a safe place for future reference.
(Illustration shows optional accessories that may not be installed on your machine.)
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions Outline
● Precautions
(See pages 7-13)
Getting To Know
Your Machine
● Quick Operation Chart, Adding Paper (See pages 14, 15)
● Problem Solving, Memory Full,
Replacing Toner Bottle/Toner Waste Container,
Removing Misfed Paper,
Error Codes (U Code/J Code)
(See pages 15-21)
● Control Panel Key/Indicator Names
Before Starting
(See pages 22, 23)
● Operating Instructions for making copies
(See pages 24-51)
Making Copies
Function
● Changing the Initial Machine Modes
● General, Copier, Printer and Scanner Settings
(See pages 52-67)
● Combined Function Table
(See page 68)
● Components
● ADF, i-ADF
(See page 69)
(See page 25)
Accessories
● Document Scanning
● Address Book
● Function
(See pages 70, 71)
(See pages 72-73)
(See pages 74, 75)
Network Scanner
● Direct Connection (with Crossover Cable)
(See pages 76, 77)
● Troubleshooting
● Replacing the Battery/Set the Date and Time
(See pages 80, 81)
(See pages 78, 79)
Problem Solving
Appendix
● Specifications, Options and Supplies
(See pages 82-84)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Symbols/Icons
The following Symbols/Icons are used throughout this operating instructions manual.
Place original(s) on the ADF/i-ADF
C
Getting to know your machine
Before starting
B
A
Place original on the Platen
(Book)
When making copies
Place original on the Platen
(Sheet)
Press any Hard Key on the
Control Panel
When setting the machine
modes
Press Hard Key
Accessories
Input numbers
● Number of Copies, etc.
Input text with a Keyboard
(Option)
When scanning document(s)
Problem solving
Go to next step
Go to next step (below)
5
Appendix
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Table of Contents
Getting to Know Your Machine
Useful Office Functions/Operating Instructions .......................................................................... 2
Multi-Tasking Job Table.................................................................................................................. 2
Operating Instructions Outline ...................................................................................................... 3
Symbols/Icons ................................................................................................................................. 4
Safety Information........................................................................................................................... 7
Precautions.................................................................................................................................... 11
Operation Chart............................................................................................................................. 14
■ Quick Operation Chart ................................................................................... 14
● Adding Paper .............................................................................................. 14
■ Problem Solving ............................................................................................. 15
● Toner Level Check Operation ..................................................................... 15
● Memory Full................................................................................................ 15
● Replacing Toner Bottle/Toner Waste Container.......................................... 16
● Removing Misfed Paper ............................................................................. 16
● User Error Codes (U Code) ........................................................................ 20
● Jam Error Codes (J Code) ......................................................................... 21
Before Starting
Control Panel................................................................................................................................. 22
Making Copies
Basic Copy
■ Copying the Same Size Originals (1:1) .......................................................... 24
■ Position of the Original(s) ............................................................................... 24
■ Copying with Preset or Variable Zoom Ratios ................................................ 24
■ Using the ADF/i-ADF (Option) ........................................................................ 25
Creative Features
■
1
2 Copy, 2
2 Copy, 2
1 Copy (DP-8020E with optional i-ADF) ........... 26
■ 2
2
2 Copy (DP-8020E with optional ADF)
1 Copy (DP-8020E/8020P /8016P with optional ADF) .......................... 28
∗
■ Book
2 Copy (DP-8020E only) .................................................................. 30
■ N in 1 .............................................................................................................. 32
■ 2 Page Copy .................................................................................................. 34
■ Double Exposure............................................................................................ 36
■ Erase (Margin/Edge) ...................................................................................... 38
■ Erase (Book) .................................................................................................. 38
■ Effects (Centering/Image Repeat) .................................................................. 40
■ Sort................................................................................................................. 42
Other Features ■ Skyshot Mode (Digital/Manual Skyshot Mode) .............................................. 44
■ Job Build and SADF Mode ............................................................................. 46
■ Concurrent Copying ....................................................................................... 46
■ Interrupt Mode ................................................................................................ 48
■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) ......................... 48
■ Job Memory ................................................................................................... 48
■ Completion Notice .......................................................................................... 50
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Table of Contents
Function
■ Using Function Modes to Change the Initial Machine Modes ........................ 52
■ Procedure....................................................................................................... 52
■ General Settings ............................................................................................ 54
■ General Settings (For Key Operator) ............................................................. 54
■ Copier Settings............................................................................................... 57
■ Copier Settings (For Key Operator) ............................................................... 58
■ Printer Settings............................................................................................... 59
■ Printer Settings (For Key Operator) .............................................................. 60
■ Scanner Settings (Scan Parameters)............................................................. 61
For Example................................................................................................................................... 62
■ Changing the Paper Size (Paper Tray) .......................................................... 62
■ Department Counter....................................................................................... 64
■ Network Settings ............................................................................................ 66
Combined Function Table ............................................................................................................ 68
Accessories
Components .................................................................................................................................. 69
Network Scanner
Document Scanning ..................................................................................................................... 70
■ Document Scanning ....................................................................................... 70
Address Book ................................................................................................................................ 72
■ Adding your PC’s IP Address ......................................................................... 72
Function ......................................................................................................................................... 74
■ Scan Parameters (Scanner Settings)............................................................. 74
■ Select Mode ................................................................................................... 74
Direct Connection (with Crossover Cable) ................................................................................. 76
■ Direct Connection (with Crossover Cable) ..................................................... 76
Problem Solving
Troubleshooting ............................................................................................................................ 78
Replacing the Battery/Set the Date and Time............................................................................. 80
Appendix
Specifications ................................................................................................................................ 82
■ DP-8020E/8020P/8016P (For Copier) ........................................................... 82
■ Network Scanner (DP-8020E/8020P Only) .................................................... 83
■ ADF (DA-AS181) Optiion/i-ADF (DA-AR202) (DP-8020E Only) .................... 83
■ 2nd/4th Paper Tray (DA-DS184), 3rd Paper Tray (DA-DS185) (Option)
(3rd, and 4th Paper Tray for DP-8020E/8020P only) ..................................... 83
Options and Supplies ................................................................................................................... 84
■ Options ........................................................................................................... 84
■ Supplies ......................................................................................................... 84
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Safety Information
For Your Safety
To prevent severe injury and loss of life, read this section carefully before using the Panasonic
DP-8020E/8020P/8016P to ensure proper, and safe operation of your machine.
■ This section explains the Warnings and Cautions used in this Operating Instructions manual.
WARNING Denotes a potential hazard that could result in serious injury or death.
CAUTION Denotes hazards that could result in minor injury or damage to the machine.
■ This section also explains the graphic symbols used in this Operating Instructions manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
This symbol is used to alert operators to a heated surface that may cause
burns and requires close attention.
WARNING
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat, and
eventually cause fire if left unattended over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord
is required, always use a properly rated cord.
● 120 V/12 A
If you use a cord with an unspecified current rating, the machine, or plug may emit
smoke, or become hot to the touch.
Do not attempt to repair, pull, bend, chafe, or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire, or electric shocks.
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is damaged, or insulated wires are exposed, contact your authorized
Panasonic dealer for a replacement. Using a damaged cord can cause fire, or electric
shocks.
Stop operation immediately if your machine emits smoke, excessive heat, unusual noise
or smell, or if water is spilt onto the machine. These conditions can cause fire.
Immediately switch Off and unplug the machine, and contact your authorized Panasonic
dealer.
Do not disconnect, or reconnect the machine while the power switch is in the On
position. Disconnecting a live connector can cause arcing, consequently deforming the
plug and cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cord
forcibly can damage it, and cause fire, or an electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug
it. If an unused machine is left connected to a power source for a long period, degraded
insulation can cause electric shocks, current leakage or fire.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Safety Information
Be sure to switch Off, and unplug the machine before accessing the interior of the
machine for cleaning, maintenance or fault clearance. Access to a live machine’s interior
can cause an electric shock.
Once a month, unplug the machine and check the power cord for the following. If you
notice any unusual condition, contact your authorized Panasonic dealer.
● The power cord is plugged firmly into the receptacle.
● The plug is not excessively heated, rusted, or bent.
● The plug and receptacle are free of dust.
● The cord is not cracked or frayed.
Operating Safeguards
Do not touch areas where these caution labels are attached to, the surface may be very
hot and may cause severe burns.
Do not place any liquid container such as a vase, or coffee cup on the machine. Spilt
water can cause fire or shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and
flammable parts get into the machine, they can short-circuit internal components, and
cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine
immediately. Contact your authorized Panasonic dealer. Operating a debris-
contaminated machine can cause fire or electric shock.
Never open or remove machine covers that are secured with screws unless specifically
instructed in the “Operating Instructions”. A high voltage component can cause electric
shocks.
Do not try to alter the machine configuration or modify any parts. An unauthorized
modification can cause smoke or fire.
Consumable Safeguards
Never dispose of toner, toner bottles, or a toner waste container into an open flame.
Toner remaining in the cartridge/bottle can cause an explosion, burns and/or injuries.
Keep button batteries/stamp out of the reach of children. If a button battery/stamp is
swallowed accidentally, get medical treatment immediately.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials such as
curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment. Prolonged
exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 95 lb (43.3 kg)
(DP-8020E) / 93 lb (42.3 kg) (DP-8020P/8016P). If tilted, the machine may tip-over and cause
injuries.
When relocating the machine, contact your authorized Panasonic dealer.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine is
moved with the power cord attached, it can cause damage to the cord which could result in fire or
electric shock.
Operating Safeguards
Do not place a magnet near the safety switch of the machine. A magnet can activate the machine
accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick original, do not use excessive force to press it against the platen glass. The
glass may break and cause injuries.
Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet of paper
is wrapped around the heat roller, do not try to remove it yourself to avoid injuries or burns. Switch
Off the machine immediately, and contact your authorized Panasonic dealer.
Do not use conductive paper, e.x:. folding paper, carbonic paper and coated paper. When a misfed
paper jam occurs, they can cause a short-circuit and fire.
Do not place any heavy objects on the machine. An off-balance machine can tip-over or the heavy
object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time to minimize the
ozone density in the air.
When copying with the platen cover open, do not look directly at the exposure lamp. Direct eye
exposure can cause eye fatigue or eye injury.
Pull out paper trays slowly to prevent injuries.
When removing misfed paper, make sure that no pieces of torn paper are left in the machine. A
piece of paper remaining in the machine can cause fire. If a sheet of paper is wrapped around the
heat roller, or when clearing a misfed paper that is difficult or impossible to see, do not try to
remove it by yourself. Doing so can cause injuries or burns. Switch Off the machine immediately,
and contact your authorized Panasonic dealer.
If accessing the inner components of the machine to clear misfed paper, etc., exercise care not to
touch heated areas, or you may get burned.
Others
■ When clearing a paper jam or other fault, follow the appropriate procedure given in the Operating Instructions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Safety Information
For Your Safety
CAUTION
Consumable Safeguards
Be sure to use the specified type of batteries only.
Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can
burst or leak, resulting in spillage or injuries.
Others
■ The machine has a built-in circuit for protection against lightning-induced surge current. If lightning
strikes in your neighborhood, maintain ample distance from the machine, and do not touch the
machine until the lightning has stopped.
■ If you notice flickering or distorted images or noises on your audio-visual units, your machine may
be causing radio interference. Switch it Off and if the interference disappears, the machine is the
cause of the radio interference. Perform the following procedure until the interference is corrected.
● Move the machine and the TV and/or radio away from each other.
● Reposition or reorient the machine and the TV and/or radio.
● Unplug the machine, TV and/or radio, and replug them into outlets that operate on different
circuits.
● Reorient the TV and/or radio antennas and cables until the interference stops. For an outdoor
antenna, ask your local electrician for support.
● Use a coaxial cable antenna.
CAUTION
Denotes hazards that could result in minor injury or damage to the machine.
● TO REDUCE THE RISK OF SHOCK OR FIRE, USE ONLY NO. 26 AWG OR LARGER TELEPHONE
LINE CABLE.
● DISCONNECT ALL POWER TO THE MACHINE BEFORE COVER(S) ARE OPENED. CLOSE
THE COVER(S) BEFORE THE MACHINE IS RE-ENERGIZED.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons, including the following:
● DO NOT USE THIS PRODUCT NEAR WATER, FOR EXAMPLE, NEAR A BATH TUB, WASH
BOWL, KITCHEN SINK OR LAUNDRY TUB, IN A WET BASEMENT OR NEAR A SWIMMING
POOL.
● AVOID USING A TELEPHONE (OTHER THAN A CORDLESS TYPE) DURING AN ELECTRICAL
STORM. THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.
● DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE LEAK.
SAVE THESE INSTRUCTIONS.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Precautions
■ Laser Safety
LASER SAFETY
This unit employs a laser. Only qualified service personnel
should attempt to service this device due to possible eye
injury.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR
PERFORMANCE PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
■ Caution Label
• ATTENTION:Hot Surface
• ATTENTION:Zone chauffée
• ACHTUNG :Heiße Oberfläche
• ATENCION :Superficie caliente
•
•
FDA1992
Manufacturer’s Name
and Address
Factory ID
CAUTION
This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some
components.
Disposal of these materials may be regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Precautions
Installation
■ The maximum power consumption is 1.3 kW.
A properly wired (grounded), dedicated, 12 A, 120 V AC outlet is required. Do not use an extension
cord.
The power cord on this machine must be used to disconnect the main power.
Please ensure that the machine is installed near a wall outlet and is easily accessible.
Supplies
■ Store the Toner and paper in cool areas with low humidity.
● Use high quality 16 - 24 lb (60 - 90 g/m2) (Sheet Bypass: 15 - 34 lb (55 - 133 g/m2)) paper.
● For optimum performance, it is recommended that only Panasonic Brand supplies are used in
the machine.
● Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)
● Panasonic recommends using high quality 16 - 24 lb (60 - 90 g/m2) paper, using an inferior paper
may cause excessive paper curl, requiring you to empty out the Output Tray more often to avoid
paper jams.
■ Use of other than genuine Panasonic supplies can damage the machine. This may void the warranty
of the machine and supplies. Be sure to use only genuine Panasonic Toner designed for the machine.
■ The machine should not be installed in areas with the following conditions:
● Extremely high or low temperature and humidity.
The machine should be installed under the following ambient conditions:
Temperature: 50-86 °F (10 - 30 °C)
Relative humidity: 30-80 %
● In areas with chemical fume concentration.
● With unstable or uneven conditions (floors, etc.).
● Direct exposure to sunlight or fluorescent light.
● In areas of high dust concentration.
● Directly in the air conditioning flow.
● In areas of poor ventilation.
● In areas with extreme vibration.
Illegal Copies
It is unlawful to make copies of certain documents.
Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may
be imposed on those found guilty. The following are examples of items that may be illegal to copy in
your country.
● Currency
● Bank notes and checks
● Bank and government bonds and securities
● Passports and identification cards
● Copyright material or trademarks without the consent of the owner
● Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
Install your machine near a supervised area to prevent illegal copies from being made.
Others
Panasonic is not responsible for data loss and any consequence caused by computer virus infection
or external shocks.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling
■ Do not turn the Power Switch Off, or open the Front Cover during copying/printing.
■ Sleep/Shutdown Mode Notice
● The following functions will not work if the Sleep/Off Mode setting is set to the Shutdown mode.
When using any of the following functions, we recommend that you leave the Sleep/Off Mode in the
initial factory default setting (Sleep mode).
- Turn OFF the Power Switch on the Right Side of the machine.
- Printer Function (Local Parallel Port and Network Connections)
- Internet Fax/Email Function
- Facsimile Function (Option)
When the LAN cable is not connected and DHCP Default is "Yes"
■ Key Operator Password
● The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes
require the Key Operator Password.
■ User Authentication
The User Authentication works for this machine under the management of the Windows Server. As a result,
users must be authenticated before they can use the functions of the machine (copying, faxing, scanning,
and printing). The supported authentication protocol is NTLM v2.
Users
- Users login to this machine using their Windows account (user name and password).
System Administrator
- The system administrator can manage user account by using Windows Server.
- User authentication can be set independently for each function (copying, faxing, scanning, and printing).
■ Dept. (Departmental) Code
When the Department Counter function is set up, the Dept. (Department) Code input screen is displayed on
the LCD Display. A registered Department Code (1 to 8- digit) is required to gain access to each secured
function, or the secured Copy/Fax/Scanner function(s) cannot be used. Please consult with the Key Operator
regarding the Department Code(s) for the desired function.
Procedures :
1 Input a registered department code (1 to 8-digit).
2 Press the SET or START key.
■ Maximum Copies Limitation
After setting the maximum allowed number of copies for each department, consult with your Key Operator
when the total copy count reaches the designated limit and the “DEPT.MAXIMUM COPIES HAS BEEN
REACHED” message appears on the LCD.
■ Power Switch
If you are not going to use the copier for long periods of time, turn OFF the Power Switch on the Right Side of
the machine.
If the Hard Disk Drive Unit (DA-HD18) is installed, to prevent a Scan Disk Function from being performed
(similar to Windows OS when the power is abruptly interrupted), it is important to follow the step sequence
below when turning OFF the Power Switch on the machine.
1. If the machine is in the “ENERGY SAVER (Shutdown Mode)” you may turn the Power Switch on the Right
Side of the machine to the OFF position. If it is not in the “ENERGY SAVER (Shutdown Mode)”, continue
to step 2 below.
2. Press “FUNCTION” and “ENERGY SAVER” keys simultaneously first. The Energy Saver Key will light.
3. Turn the Power Switch on the Right Side of the machine to the OFF position.
■ Auto Reset Time
As the initial setting for Auto Reset Time is 1 minute, the selected operation mode goes back to default
operation mode after 1 minute. If you wish to change the Auto Reset Time, consult with your Key Operator.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Operation Chart
■ Quick Operation Chart
1
2
Face Up
From
ADF/i-ADF
(Option)
C
B
A
∗
Original Guides Tray
If set to other
function mode
(DP-8020E/8020P
only)
Adjust to the
(Max. 50 Letter
size originals)
or
original's width
∗
Hold the guides by the center when
adjusting the width
Original Guides
From
INV
INV
LTR
LGL
LDR
Platen
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
INV
Turn the Power
Switch to the
ON position
Adding Paper
INV
LTR
LGL
LTR
LDR
(ON)
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
(OFF)
● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
1
2
3
Paper Tray
Paper Tray
Max Level
Indicator
Load Paper: Face Up
NOTE:
NOTE:
Paper Weight: 16 - 24 lb (60 - 90 g/m2)
Paper Capacity: 550 Sheets (20 lb (80 g/m2))
Load the paper properly, and ensure
that it does not exceed the Max. Level
indicator.
To change the paper size, refer to
page 62.
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
1
2
3
Face Down
Until it stops
PUSH
4
Until it stops
Sheet Bypass
Upper Limit Guides
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed, or skew.
4
Width Guides
Load Paper
(Do not exceed limit guides)
Paper Weight: 15-34 lb (55 - 133 g/m2)
Paper Capacity: 50 sheets/20 lb (80 g/m2)
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper, then load them together onto
the tray.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Reduction/
Enlargement
only
From
Platen only
LTR ->LTR [LTR ]
ZOOM:100% COPIES:001
LTR ->INV [INV ]
ZOOM: 65% COPIES:001
Number of
Copies
(Max. 999)
Select desired settings
(See pages 24-51)
Interrupt
(See page 48)
Erase
(See page 38)
2-Sided/Original
Type of
Original
Copy
(See pages 26-31)
2-Sided Copy:
DP-8020E only
Sort
(See page 42)
Effects
(See page 40)
Manual
Exposure
Double
Exposure
(See page 36)
2 Page Copy
(See page 34)
N in 1
(See page 25)
(See page 32)
Zoom Mode
(See page 25)
■ Problem Solving
Adding Paper
Removing Misfed Paper
U## (User Error Code)
J## (Jam Error Code)
E## (Machine Error Code) (Call your Service provider)
REPLACE DRUM UNIT (Call your Service provider)
(See page 16)
(See page 20)
(See page 21)
Replacing Toner Bottle/Toner Waste Container
(See page 16)
Checking Toner
(See below)
● Toner Level Check Operation
When "CHECKING TONER PLEASE WAIT" message appears, the machine is checking the toner level, and no
operation through control panel is accepted.
● Memory Full
If the memory overflows while scanning originals, the message “MEMORY FULL CONTINUE? 1:YES 2:NO”
will appear on the LCD. If this occurs, follow the instructions on the LCD.
If this occurs frequently, adding optional memory is recommended, consult with an authorized Panasonic dealer.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Operation Chart
■ Problem Solving
● Replacing Toner Bottle/Toner Waste Container
1
2
Front Cover
ATTENTION
● For optimum copy quality
use the recommended
Panasonic Toner. Store
Toner Bottle in a cool
dark place. Do not unseal
the Toner Bottle unless
Toner Waste Container
you are ready to use it.
6
7
Corona Cleaner
NOTE:
Do not reuse the toner from the
Toner Waste Container.
Toner Bottle (New)
Shake it well
Slide the Corona Cleaner in and out, 3
or 4 times slowly, then return the Corona
Cleaner Handle to the original position.
● Removing Misfed Paper (Paper Exit Area) (J46)
1
2
(Ex.)
REMOVE MISFED PAPER
Jam Removal
Knob
J46
Left Cover
● Removing Misfed Paper (Paper Transport/Fusing Area) (J01, J30, J31, J33, J45, J48, J95)
1
2
Paper Tray
(Ex.)
REMOVE MISFED PAPER
J48
Left Cover
ATTENTION
● Do not scratch or touch the
surface of the OPC Drum
(Green) with bare hands.
The OPC Drum is sensitive
to light. To prevent optical
exposure problems, do not
expose the OPC Drum to
direct sunlight or bright light.
5
6
Misfed Paper
Misfed Paper
Lift Upward and Pull Out
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Cap
Corona Cleaner Handle
6
Toner Waste Container
Toner Bottle (Empty)
To
Release
8
9
10
Toner Bottle (New)
Toner Waste
Container (New)
Toner Bottle (New)
Close the Front Cover.
To
Lock
3
4
Misfed Paper
Left Cover
Heat Roller Cover
3
7
4
5
Misfed Paper
Jam Removal Knob
8
Paper Tray
Lift Upward and
insert the Tray
Left Cover
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Operation Chart
■ Problem Solving
● Removing Misfed Paper (ADF: Option for DP-8020E/8020P/8016P) (J70, J71, J79, J92, J93)
1
2
(Ex.)
REMOVE MISFED PAPER
Misfed Paper
ADF Cover
J70
● Removing Misfed Paper (i-ADF: Option for DP-8020E) (J70, J71, J72, J73, J76, J78, J79, J92, J93)
1
6
2
(Ex.)
REMOVE MISFED PAPER
ADF Cover
Misfed Paper
J70
7
Exit Unit
ADF Tray
● Removing Misfed Paper (2nd/3rd/4th Paper Tray: Option)
(J02, J03, J04, J07, J08, J09, J12, J13, J14, J22, J23, J24)
1
2
7
(Ex.)
REMOVE MISFED PAPER
Misfed Paper
Feed Cover
J02
6
Lift Upward
and insert
the Cover
Paper Tray
Feed Cover
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3
ADF
4
Misfed Paper
ADF Cover
3
8
4
9
5
Misfed Paper
6
Exit Unit
ADF Tray
10
Misfed Paper
2
1
ADF Cover
3
4
5
Misfed Paper
6
Paper Tray
Lift Upward and Pull Out
Misfed Paper
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting To Know Your Machine
Operation Chart
■ Problem Solving
● Removing Misfed Paper (J19, J32, J82, J85, J87: ADU for DP-8020E only)
1
2
EX.
REMOVE MISFED PAPER
J82
Left Cover
Misfed Paper
● User Error Codes (U Code)
U20
U21
U90
U01
U13
U14
U15
U16
U25
U07
Code
U01
U07
U13
U14
U15
U16
Check Points
Code
Check Points
ADF Cover is open.
Front and/or Left Cover is open.
Feed Cover is open. (See page 18)
Low Toner, or Out of Toner.
U20
U21
U25
U90
ADF/i-ADF was opened while scanning from
ADF/i-ADF.
Toner Waste Container is full.
Toner Waste Container is incorrectly installed.
Developer Unit is incorrectly installed.
Call your Service Provider.
Toner hardened inside the Toner Bottle. Remove
the Toner Bottle, and shake it well.
Battery requires replacement.
(See page 80)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Misfed Paper
Misfed Paper
Jam Removal
Knob
Left Cover
Note: • Do not pull Misfed Paper from the front, it may cause damage.
● Jam Error Codes (J Code)
Code
Check Points
Code
J30,
J31,
J33,
J45,
J46,
J48,
Check Points
J00
Remove paper from the Sheet Bypass.
Open, and close the Left Cover (as illustrated
in Steps 1 and 5 above).
Remove misfed Paper.
(See page 16)
∗J95: Check the paper size in the paper tray.
(See page 62)
J01
Pull the paper tray out, and remove the jammed
paper from the standard paper tray (Tray-1)
(See page 16)
∗
J02,
J03,
J04
Pull the paper tray out, and remove the jammed
paper from the optional paper trays (Tray-2 to 4)
(See page 18)
J95
J19,
J32,
J82,
J85,
J87
Removing misfed Paper.
(See page 20)
J07,
J08,
J09,
J12,
J13,
J14,
J22,
J23,
J24
Remove misfed paper.
(See page 18)
J70,
J71,
J72,
J73,
J76,
J78,
J79,
J92,
J93
Removing misfed Paper
(See page 18)
*Cause with 2nd/3rd/4th Paper Tray.
NOTE: ● The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared,
paper is most likely jammed at other location(s). Check the Jam Error Codes Table above for other check points,
and remove all misfed paper.
● Make sure that the Jam Error Code, and Misfed Indicator disappears after removing the misfed paper.
● The Jam Error Code, and Misfed Indicator will not disappear if the paper is still jammed in the machine. Check
again, and remove all misfed paper.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Starting
Control Panel
1
2
3 4 5
6
7 8 9
10 11
12
17
16
15
14
13
Keyboard (Option)
Inputs characters for Station Name,
Email Address, Parameter settings,
Directory Search, etc.
LCD
Display
(See pages 50)
29
28
No.
Icon
Contents
No.
Icon
Contents
2 PAGE COPY Key
INTERRUPT Key
Interrupts other copy job
while making copies.
(See page 48)
Selects 2 Page Copy mode.
(See page 34)
1
2
ERASE Key
Selects Edge, Book or
Margin mode. (See page 39)
COPY Key
To use the unit as a
photocopier.
3
4
EFFECTS Key
Selects Image Repeat or
Centering mode.
FAX/EMAIL Key
Used to select the FAX/
EMAIL communication.
6
(See page 40)
SCAN/FILE Key
To use the Scan/File function
(See pages 70-75)
MEMORY Keys
Selects Job Memory mode.
(See pages 48, 49)
5
PRINT Key
To use the unit as a Printer.
Original Mode Select
Keys/Indicators
Selects original mode.
(See pages 25 and 70)
LIGHTER/DARKER Key/
Indicators
To adjust the Manual
Exposure.
7
9
8
(See pages 25 and 70)
Energy Saver Key
Saves power while the
machine is not in use.
(See page 48)
PRINT DATA Icon / LED
The LED Flashes/ light in
GREEN when receiving/
printing data.
10
ORIGINAL SIZE Key
To select an original size.
COPY SIZE Key
To select a copy size.
11
12
14
DUPLEX Key
DOUBLE EXPOSURE Key
Selects Double Exposure
mode. (See page 37)
Selects a 2-Sided or 1-Sided
copy. (See pages 27-31)
2-Sided Copy: DP-8020E
only
13
N in 1 Key
Selects N in 1 copy mode.
(See page 33)
SORT Key
Selects Electric Sort mode.
(See page 42)
15
16
LCD Display (Copy Function)
a Original Size
a
b
c
d
Copy Size
b
c
LTR ->LTR [LTR ]
ZOOM:100% COPIES:001
Rotating Paper Size
d Paper Size in Paper Tray
Zoom Ratio
e
f
22
Number of Copies
e
f
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
20
21
22
Used for Fax, Internet Fax, and
Email Functions.
∗
(except for the ABBR Key, see
page 50.)
23
27
26
25
24
No.
Icon
Contents
No.
Icon
Contents
PAPER TRAY Key
Selects the paper tray.
Warning Indications
When unit is used as a
photocopier.
17
18
: Add Paper (See page 14)
: Replace Toner Bottle
(See page 16)
Cursor Key
To select the zoom
ratio, etc.
19
: Remove misfed paper
(See pages 16-21)
: Call Service
Keypad
Sets copy quantities, etc.
(For DP-8016P)
20
RESET Key
Resets all features to the initial
power-on state of the active function.
STOP Key
Stops the jobs.
(Copy, Scan, etc.)
21
23
22
24
START Key
Starts the jobs.
(Copy, Scan, etc.)
SET Key
Sets the parameter(s) of Function
settings.
CLEAR Key
Clears the copy quantities, etc.
FUNCTION Key
Used for changing the paper size,
initial function values (default
values) and key operator settings.
25
27
26
28
ALARM LED (RED)
Lights/Flashes when trouble
occurs.
ACTIVE LED (GREEN)
Flashes when machine is in
operation.
Lights:
Sets scanning resolution.
(See page 70)
When the machine stops due to the following
condition(s):
29
● No paper in the selected tray or toner has run
out.
● Paper has misfed, etc.
Flashes:
When the machine alerts of the following
condition(s):
● No paper in the Tray. (Tray not selected)
● Toner is getting low, etc.
NOTE:
To adjust the brightness of the LCD display, press and while holding down the CLEAR Key, keep pressing the
ORIGINAL SIZE or COPY SIZE Key until the desired brightness is achieved.
ORIGINAL SIZE : Dimmer
COPY SIZE
: Brighter
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Basic Copy
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.
1
2
For ADF
For i-ADF
From Platen only
100%
LDR
: Ledger
LGL
LTR
LTR
INV
: Legal
or
: Letter
: Letter-R
: Invoice
INV
: Invoice-R
■ Position of the Original(s)
∗
For ADF/i-ADF
For Platen
Original Guides
(Face Up)
(Face Down)
INV
INV
LTR
LGL
LDR
INV
INV
LTR
LGL
● Feeds originals automatically
Up to 50 Letter/Invoice size
(20 lb (80 g/m2))
LTR
LDR
● When copying
a thick Booklet,
do not close
(Up to 30 Legal/Ledger size)
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
∗ ADF for DP-8020E/8020P/
8016P
the ADF/i-ADF.
i-ADF for DP-8020E only
■ Copying with Preset or Variable Zoom Ratios
1
2
Preset Ratios (ex: Enlargement)
For ADF
Invoice
For i-ADF
Letter
From Platen only
Variable Zoom Ratios
LDR
: Ledger
: Legal
Copies with variable zoom ratios from 50 % to
200 % in 1 % increments.
LGL
LTR
LTR
INV
50%
200%
or
: Letter
: Letter-R
: Invoice
INV
: Invoice-R
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Select type of Original(s)
PHOTO
: Mainly Photo
TEXT/PHOTO: Text and Photo
combined
TEXT
: Mainly Text
Number of
Copies
(Max. 999)
Adjust the Contrast
Press DARKER or LIGHTER
Key (5 levels)
■ Using the ADF/i-ADF (Option)
Originals that cannot be used
● Post Cards, Drawing Papers, Labelling Papers,
Heavyweight Papers, Thin Art Papers, Film
Thermal Papers
Set the originals up to the Upper Limit Indicator
(A)
Upper Limit Indicator (A)
Upper Limit Indicator (A)
Inappropriate Originals
● Paper with a smooth surface such as glossy and
coated papers
● Transparencies
● Originals with a Lead Edge that is ripped, creased,
folded, punched, or glued.
A
A
B
B
Upper Guide (B)
Upper Guide (B)
∗
i-ADF
ADF
ADF
Tray
● Mixed width size Originals (except a combination of
Ledger and Letter)
● Paste-ups
● Pressure sensitive or carbon backed papers
● Paper with excessive curl
ADF Tray
Original Guides
Adjust to the original's width
● Stapled originals
∗ ADF for DP-8020E/8020P/8016P
i-ADF for DP-8020E only
● Freshly printed copies from a laser printer
● Originals with fresh White-Out (Liquid paper
correction fluid)
For Preset Ratios
For Variable Zoom Ratios
4
3
LDR
LGL
LTR
LTR
INV
: Ledger
: Legal
Number of
Copies
(Max. 999)
: Letter
Up to 200% in 1%
Down to 50% in 1%
: Letter-R
: Invoice-R
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ 1 2 Copy, 2
2 Copy, 2
1 Copy (DP-8020E with optional i-ADF)
1
2 Copy
1-Sided
2-Sided Copy
1
2
For i-ADF
or
From Platen only for
2
2 Copy
2-Sided
2-Sided
2-Sided Copy
1
2 Copy
LDR
LGL
LTR
: Ledger
: Legal
: Letter
(1 2 Copy only)
LTR
: Letter-R
: Invoice
2
1 Copy
1-Sided Copy
INV
INV
: Invoice-R
Steps 6 to 9 for 1
2 Copy from Platen:
Next Original
6
7
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
Go to next step.
NOTE: If “2: NO” is selected,
the machine will start
copying only one side
of the original(s).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
5
3
4
~
6
9
From
Platen
only.
Bind Position
(Select within 10 sec.)
1-Sided Original
to 2-Sided Copy
2-Sided Original
to 2-Sided Copy
(For 1
2 Copy, 2
1 Copy)
Long Edge
Number of
Copies
(Max. 999)
2-Sided Original
to 1-Sided Copy
Short Edge
8
9
10
The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 42)
ANOTHER ORIGINAL?
1:YES 2:NO
Exits this
mode.
1: YES
2: NO
Continues to copy another
original, repeat steps 1
2
and 5- to step 8.
Starts making copies.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ 2
2 Copy (DP-8020E with optional ADF)
1 Copy (DP-8020E/8020P /8016P with optional ADF)
∗
2
For ADF only
1
2
Copying 2
2 or 2
1 Copy with optional
ADF (not i-ADF)
C
B
A
2
2
2 Copy
1 Copy
2-Sided
2-Sided Copy
1-Sided Copy
Odd Number Pages
Long Edge
Originals
Short Edge
Originals
2-Sided
Original to
2-Sided
Copy
A
B
C
2-Sided
1
3
5
2-Sided
Original to
1-Sided
Copy
NOTE: If the memory overflows while
scanning originals, all scanned data
will be cancelled. If this occurs,
restart from Step 1.
SET ORIGINAL ON ADF
5
Place the reverse side of the
original(s) of step 1 in the order
and direction of ejection.
INSERT SECOND SIDE
ORIENTATION AS IS
Even Number Pages
Page No.
Above
Long Edge Originals
Step
1
Short Edge Originals
Reverse Side
Step
5
6
4
2
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
5
Bind Position
(Select within 10 sec.)
(For 2 1 Copy only)
Long Edge
Number of
Copies
(Max. 999)
Short Edge
6
7
8
PRESS START TO
CONTINUE
SET ORIGINALS ON ADF
NOTE: If the page count for the Back
side does not match the page
count for the Front side (i.e.
page double-fed) of the 2-
Sided originals, a "TOTAL
PAGE MISMATCH" will be
displayed and all scanned
data will be cancelled. If this
occurs, restart from Step 1
Exits this
mode.
2
and Step 4- to Step 6.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ Book 2 Copy (DP-8020E only)
For Book Format is Flipping:
Book
2-Sided Copy
The book format and page order can be
set in the Copier Settings, Parameter No.
2
1
14 (BOOK
2 DEFAULT). (See page 58)
Original Size:
Ledger, Letter-R
Select Ledger
or Letter-R
size
(Book Format: Flipping)
∗
(Page Order: L
R)
5
The following steps, illustrate how to make
multiple copies when the Sort Mode is selected.
(See page 42)
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
2: NO
Continues to copy another
original, repeat steps 1 and 4-
Starts making copies.
2
.
For Book Format is Facing:
1
2
Blank
Page
(Book Format: Facing)
Original Size:
Ledger, Letter-R
(Page Order: L
R)
Select Ledger
or Letter-R
size
∗
6
7
NOTE: If the selected original size is not
∗
corrected, book original will not be
copied correctly as sample images.
Next Original
(page)
● If the memory overflows while scanning
originals, this machine will indicate the
error message and stop.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
5
For Sort
Mode only
Select Book Original
∗
to 2-Sided Copy
Number of Copies
(Max. 999)
6
NOTE: The copy size will be automatically selected.
∗
If the selected paper size is not set into the paper tray(s), set
paper on the Sheet Bypass (see page 14) or select another
copy size with COPY SIZE Key (See page 25).
Exits this
mode.
3
4
5
ANOTHER ORIGINAL?
1:YES 2:NO
or
6
1: YES
Continues to Copy
another page, proceed
to step 6
Select Book Original
to 2-Sided Copy
∗
2: NO
Starts making copies
Number of Copies
(Max. 999)
9
8
The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 42)
ANOTHER ORIGINAL?
1:YES 2:NO
Exits this
mode.
1: YES
2: NO
Continues to copy another
original, repeat steps 1 and 4-
to step 8.
2
Starts making copies.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ N in 1
From two/four 1-Sided originals, side by
side, to 1-Sided pages.
2
1
For ADF
● 2 in 1 Copy
For i-ADF
From Platen only
● 4 in 1 Copy
LDR
LGL
LTR
LTR
INV
: Ledger
1
2
4
: Legal
or
1
2
3
: Letter
4
3
: Letter-R
: Invoice
NOTE:
If the original's Orientation is incorrect
when N in 1 copy mode is used, the copy
sequence may not reproduce properly. If
this occurs, change the N in 1 default
Orientation in the Copier Settings,
Parameter No. 05 (N in 1
INV
: Invoice-R
5
2 in 1
1:2in1?
PRESS SET TO SELECT
Nin1
ENTER NO. OR
(1-2)
DEF.) (See page 57)
∨
^
A
B
C1
or
Portrait
4 in 1
2:4in1?
PRESS SET TO SELECT
2 in 1
4 in 1
or
A
B
C
or
Landscape
1
8
9
PRESS START TO
CONTINUE
Next Original
Combination for N in 1 copy operation.
Mode
2 in 1
Originals
2
1
1
2
1
2
2
1
1 2
2 1
Layout
1 2
2 1
32
Download from Www.Somanuals.com. All Manuals Search And Download.
For Preset Ratios
For Variable Zoom Ratios
4
3
5
LDR
LGL
LTR
LTR
INV
: Ledger
: Legal
: Letter
Up to 200% in 1%
Down to 50% in 1%
: Letter-R
: Invoice-R
Step 7 to 11 for Platen only
6
7
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
8
Go to next step.
Number of
Copies
(Max. 999)
NOTE: If “2: NO” is selected, the
machine will start copying
one side of the scanned
original.
For 4 in 1 Copy
10
11
12
ANOTHER ORIGINAL?
1:YES 2:NO
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
Continues to copy
Select “1: YES”.
another original, repeat
Repeat steps 8 and 9.
Select “1: YES”.
2
steps 1 and 6- to
3
Exits this
mode.
step 9 (10: 4 in 1).
Starts making copies.
Repeat steps 8 and 9.
2: NO
Mode
4 in 1
Originals
Layout
1
2
3
4
1
2
3
4
1 2 1 3 2 1 3 1
3 4 2 4 4 3 4 2
1 2 1 3 2 1 3 1
3 4 2 4 4 3 4 2
3 1
4 2
1 2 1 3 2 1
3 4 2 4 4 3
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ 2 Page Copy
Copying two facing pages or a Ledger size
original on two separate Letter size sheets.
1
2
Platen
Example: Ledger size original
Ledger
Page Order: L→R
Starts copying from
the Left page
Letter
Ledger
6
Page Order: R→L
Starts copying from
the Right page
The following steps, illustrate how to make multiple copies
when the Sort Mode is selected. (See page 42)
ANOTHER ORIGINAL?
1:YES 2:NO
NOTE:
The page order can be set in the Copier Settings,
Parameter No. 16 (2 PAGE MODE DEF.)
(See page 58)
1: YES → Continues to copy another original, repeat
steps 1 and 5-
2: NO → Starts making copies.
.
Default Page Order: L→R
34
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
6
Ledger or Letter
size only
Select a Copy
Size
1
∗
∗2
Original Size
Copy Size
Letter
Letter-R
Ledger
Letter
Number of Copies
(Max. 999)
Invoice
7
NOTE: 1 If the selected original size is not corrected, the book original
∗
image will not be copied correctly.
2 A copy size will be automatically selected.
∗
If the selected copy size paper is not set into the paper tray(s),
set paper on the Sheet Bypass (see page 14) or select another
copy size using the COPY SIZE Key (see page 25).
Exits this
mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ Double Exposure
1
From 2-Sided originals to 1-Sided copies (side-by-side image).
Original Size:
Copy Size:
Letter or Invoice
Letter-R
ex. Invoice
NOTE:
When copying portrait original, set the Portrait in the Copier settings,
"1:ORIENTATION of Parameter No. 05 N in 1 DEF." (See page 57)
Front Side of Original
Original Size:
Letter or Invoice size only
A
B
C
A D
B E
C F
Front Side
Image
Back Side
Image
5
ANOTHER ORIGINAL?
1:YES 2:NO
Copy Size: Letter
ex. Invoice-R
Front Side Image
Back Side Image
1: YES
ABC
DEF
ABC
NOTE
If “2: NO” is selected,
the machine will start
copying only scanned
original.
NOTE:
When opening the Platen Cover or optional ADF/i-ADF
●An incorrect position detection of the original may occur when a strong
light shines on the glass during this mode.
●An incorrect exposure may occur when there is a black line at the edge of
the original or an image which the machine interprets as a black pattern
in this mode.
9
●The final copy may be affected if colored background original(s) do not
have a white edge or if it is less than 2 mm wide.
The default setting of Digital Skyshot Mode should be set to “OFF” in the
Copier Settings, Parameter No. 07 (DIGITAL SKYSHOT).
Exits this
mode.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
2
5
Select Invoice
or Letter
Number of Copies
(Max. 999)
6
7
8
The following steps, illustrate how
to make multiple copies when the
Sort Mode is selected. (See page
42)
9
ANOTHER ORIGINAL?
1:YES 2:NO
Back Side
of Original
1: YES
Continues to copy
another original, repeat
2
steps 1 and 4- to
step 7.
Starts making copies.
2: NO
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ Erase (Margin/Edge)
Margin
1
2
For ADF
∗
Shifts image to left, right, top or bottom.
For i-ADF
From Platen only
LDR
LGL
LTR
LTR
INV
: Ledger
Edge
Creates a blank edge.
: Legal
∗
or
: Letter
: Letter-R
: Invoice
INV
: Invoice-R
NOTE:
Shift position of Margin and blank
edge value can be changed with
6
∗
For Margin
LEFT MARGIN
Copier Setting Mode. (See page 57)
10mm
∨
^
For Edge
EQUAL RATE
VOID MARGIN = 5mm
^
ERASE Key
changes from
flashing to
continuous lit status.
5 - 99 mm
■ Erase (Book)
Book
1
2
Eliminates dark inner binding shadows.
LDR
LGL
LTR
LTR
INV
: Ledger
: Legal
: Letter
: Letter-R
: Invoice
INV
: Invoice-R
6
BOOK MARGIN
CENTER VOID =20mm ∨
^
5 - 99 mm
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
5
ERASE MODE (1-3)
1:MARGIN?
ENTER NO. OR ∨
PRESS SET TO SELECT
^
or
6
2:EDGE?
PRESS SET TO SELECT
This Key will flash.
: MARGIN
: EDGE
or
8
7
Exits this
mode.
Number of
Copies
(Max. 999)
3
4
5
ERASE MODE (1-3)
3:BOOK?
ENTER NO. OR ∨
PRESS SET TO SELECT
^
6
: Book
or
7
8
Exits this
mode.
Number of
Copies
(Max. 999)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ Effects (Centering/Image Repeat)
Centering
Copy image can be centred automatically on
selected paper.
1
2
Open the ADF
or Platen Cover
Image Repeat
Creates continuous copy image on one sheet.
Minimum original size: 20 x 20 mm.
6
The dotted line can be
set to “None” or “Print”
by the Copier Settings,
Parameter No. 15
(IMAG. REPEAT DOT.)
(See page 58).
NOTE:
● The final copy may be affected if colored
background original(s) do not have a white
edge or if it is less than 2 mm wide.
The default setting of Digital Skyshot Mode
should be set to “OFF” in the Copier
Settings, Parameter No. 07 (DIGITAL
SKYSHOT).
Number of
Copies
(Max. 999)
● Remove the originals from the ADF before
selecting the Centering, and Image Repeat
mode.
An incorrect position detection of the
original may occur when a strong light
shines onto the glass during the Centering,
and Image Repeat mode.
Also an image which the copier interprets
as a black pattern in the Centering, and
Image Repeat modes.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
EFFECTS
ENTER NO. OR ∨
(1-2)
1:CENTERING?
PRESS SET TO SELECT
PAPER TRAY
TRAY-1
∨
^
^
or
2:IMAGE REPEAT?
PRESS SET TO SELECT
6
: Centering
: Image Repeat
or
TRAY-1
TRAY-2
TRAY-3
TRAY-4
BYPASS
NOTE: Tray-2, 3 and 4 are
options. (See page 69)
7
Exits this
mode.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Creative Features
■ Sort
Sort
2
1
For ADF
Multiple copy sets are sorted automatically.
For i-ADF
1
1
1
2
2
2
3
3
3
Lights
Sort mode is
selected.
Rotate-Sort
Multiple copy sets are sorted automatically and
are stored on the Output Tray in alternate
direction (rotate). Initial Sort-Rotate Mode is
“1:OFF”, this setting can be selected within the
Copier's General Settings. (See page 54)
or
1
1
Steps 5 to 8 from Platen only
2
2
3
3
5
6
(Available Letter size paper only)
ANOTHER ORIGINAL?
1:YES 2:NO
Non-Sort
Copy is stored on the Output Tray.
NOTE
Initial Sort Mode settings can be selected
within the Copier Settings, Parameter No. 10
(SORT PRIORITY ADF) or Parameter No.
11 (SORT PRIOR. GLASS). (See pages 57
and 58)
1: YES
Go to next step
NOTE
Initial Sort Priority Setting:
For ADF: 2:Sort; For Platen: 1:Non-Sort
If “2: NO” is selected, the
machine will start copying
one side of the original(s).
Next Original
42
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
~
5
8
From Platen
only
From Platen only
LDR
LGL
LTR
LTR
INV
: Ledger
: Legal
: Letter
Number of
Copies
(Max. 999)
: Letter-R
: Invoice
INV
: Invoice-R
7
8
PRESS START TO
ANOTHER ORIGINAL?
CONTINUE
1:YES 2:NO
: YES
Continues to copy another
original, repeat steps 1 and 4- 2
to step 7.
: NO
Starts making copies.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Other Features
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
■ Digital Skyshot Mode
The default setting of Digital Skyshot Mode is “NORMAL”. This
default setting can be changed in the Copier Settings.
(See page 57)
1
NOTE
The default setting of Digital Skyshot Mode is “NORMAL”. In this
Open the ADF more
than 45 degrees
wide.
setting, the unit scans once. If there are black areas around the
borders in the copies, set the Digital Skyshot Mode to “QUALITY”
to soften the dark borders. In this setting, the unit scans twice.
OFF
: NONE
NORMAL : Default setting (usually select this mode).
QUALITY : For better definition, select the Quality mode.
● The final copy may be affected if colored background original(s)
do not have a white edge or if it is less than 2 mm wide.
The default setting of Digital Skyshot Mode should be set to
“OFF” in the Copier Settings, Parameter No. 07 (DIGITAL
SKYSHOT).
■ Manual Skyshot Mode
Enable the Copier Settings, Parameter No. 08 (MANUAL
SKYSHOT) first. (See page 57)
1
From Platen
NOTE
Upper-
Left
Corner
● Other jobs requiring memory cannot be performed, while M1 and
M2 buttons are being used for the Skyshot mode.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
LDR
LGL
LTR
LTR
INV
: Ledger
: Legal
Number of
Copies
(Max. 999)
: Letter
: Letter-R
: Invoice
NOTE
● An incorrect position detection of the original may occur when
a strong light shines onto the glass during digital skyshot mode.
● An incorrect exposure may occur when there is a black line at
the edge of the original or an image which the machine
interprets as a black pattern in the digital skyshot mode.
INV
: Invoice-R
2
3
∗
Custom size
or
∗
Default M1/M2 size can be
changed by Function mode.
(See page 58)
Number of
Copies
(Max. 999)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Other Features
■ Job Build and SADF Mode
Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF Mode.
1
For ADF
2
NOTE: Set the Copier Settings, Parameter No.
12 (SADF DEFAULT) to “OFF” position
in advance. (See page 59)
For i-ADF
Thin paper: minimum 15 lb (55 g/m2)
Select desired
settings
Example: To make 5 sets of sorted copies of
80 sheets of originals. (Letter size)
1
2
For ADF
50
80
1
For i-ADF
1
Select desired
settings
Originals: 50 sheets
<1st scan>
80
51
Place the first 50
sheets of originals
on the ADF Tray.
1st and 2nd Scanned Data
are combined into one job.
Originals: Remaining
30 sheets <2nd scan>
5 sets of 80 sheets
sorted copies are
printed
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
1
2
For ADF
(Requires the optional Hard Disk Drive and
Image Memory (See page 69) to be installed)
1st job
For i-ADF
1st job
Copy
Select desired
settings
2nd job Reserve
or
2nd job
● Job Build and SADF function cannot be combined with 2
● Concurrent Copying function cannot be used when the Job Build and SADF function are set to
1 and 2
2.
NOTE
the “ON” position in the Copier Settings, Parameter No. 12 (SADF DEFAULT). (See page 59)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
For ADF
Place the next
original within 5
sec. of last ejected
original.
Starts the printing
process.
For i-ADF
Number of Copies
(Max. 999)
3
5
4
For ADF
Place the next
original within 5
sec. of last
For i-ADF
ejected original.
(30 sheets)
Select the Sort mode
Lights
Sort mode is
selected.
Number of
Copies
(Max. 999)
(ex. 5)
Starts the printing process.
(ex. 5 sets of 80 sheet sorted
copies)
3
4
5
When starting the printing
process:
Set the next copy job, repeat
steps 1 to 3.
When the 1st copy job
is completed, next
original(s) will be
automatically printed.
Next original(s) will be scanned.
● Next Jobs can be reserved
(up to 12 jobs).
Number of
Copies
(Max. 999)
Starts making a copy
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Other Features
■ Interrupt Mode
Other Job
This mode interrupts the
current running copy job and
allows other copy jobs to be
processed.
1
2
For ADF
or
For i-ADF
(See pages 24-43)
■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)
These modes save power while the machine is not in use.
Power Saver Mode
To enter
To exit
Automatically enters
the Power Saver
Mode after 10
or
minutes from
Flashes :
Power Saver
Mode
∗
the last job.
or Any Key
Sleep/Shutdown Mode
Automatically enters the Sleep/
To exit
Shutdown Mode after 10 minutes
∗
from the last job.
Lights :
NOTE
Sleep/Shutdown
Mode
To adjust the default Sleep/
Shutdown Mode timer, see
page 54.
∗
■ Job Memory
Two Copy Jobs can be stored in Memory
(M1 to M2) for recall at a later time.
To store a job in memory
1
2
Set up the copy
job to be stored.
(See pages 24-43)
or
● JOB MEMORY mode will not be deleted even if the power switch is turned Off.
● When using the manual skyshot mode, the M1 and/or M2 are turned On and other job requiring
memory cannot be used.
NOTE
48
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
6
Other Job is
completed
Modes
Power Consumption
Warm Up Time
—
Unavailable Functions
————————
————————
————————
Standby
Approx. 120 W
Approx. 19.5 W
Approx. 8.5 W
Approx. 1.6 W
Power Saver
Sleep
Approx. 30 sec.
Approx. 30 sec.
Approx. 30 sec.
Shutdown
• Printer Function
(Local USB and Network Connection)
• Internet Fax/Email Function
• Facsimile Function
(If the LAN Cable is not connected, and the "DHCP
DEFAULT" is set to "VALID", while in this mode
(Shutdown), the machine will not answer an
incoming Fax call) (See page 55)
To recall a job stored in memory
1
2
3
or
or
Number of
Copies
(Max. 999)
When the original size is not shown on the
LCD display after selected M1 or M2, select
original size with the Original Size Key.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Copies
Other Features
■ Completion Notice
If Completion Notice is set, you will be
notified on your computer when
copying is completed.
1
Before using this function, install the
Panasonic Document Management
System (Communications Utility),
and the Printer Driver (with Job
Status Utility) on your computer, and
then configure each software referring
to Setting up the Scanner
Communications Utility
Icon
Job Status Utility Icon
Confirm that the Communications Utility, and the Job Status
Utility icons are displayed on the task bar of your PC.
● If they are not, click Start button, and then
select [All Programs] -> [Panasonic] -> [Panasonic
Document Management System]
Configuration using the
Communications Utility, and Setting
up the Completion Notice. (See
Page 72)
-> Communications Utility to activate the Communications
Utility icon, and/or select [All Programs] -> [Panasonic] -> [Job
Status Utility] -> [Job Status Utility] to activate the Job Status
Utility icon.
Select a Station (PC's Address)
4-1
ABBR
ABBR [_ ]
ENTER ABBR No.
4-1
DIRECTORY
SEARCH
ENTER LETTER(S)
_
4-1
ONE-TOUCH
Keyboard (Option)
<10>PANA
10.74.252.63
● "ONE-TOUCH" is available when the optional Keyboard (DA-KB180) is installed.
● This Completion Notice is available only when connected to the Network.
To reset the Completion Notice, press COPY key and FUNCTION key simultaneously.
NOTE
50
Download from Www.Somanuals.com. All Manuals Search And Download.
2
For ADF
3
and
For i-ADF
4-1
or
Press COPY key and FUNCTION
key simultaneously
COMPLETION NOTICE
SELECT DESTINATION
4-2
5
6
ABBR No.
(2-digit)
[01]SALES
10.74.252.66
4-2
Number of
Copies
(Max. 999)
Copy Job Completed Notice
will be displayed on your PC.
Enter letter(s)
(See page 70)
ENTER LETTER(S)
SA_
[06]SALES_3
[05]SALES_2
10
10
10.74.252.66
3
[01]SALES
3
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
■ Using Function Modes to Change the Initial Machine Modes
Option
∗
∗
General
Settings
Copier
Settings
Printer
Settings
Scanner
Settings
Fax/Email
Settings
DP-8020E/8020P only
∗
Input Key Operator Password (See page 13)
General
Copier
Printer
Settings for
Key Operator
Settings for
Key Operator
Settings for
Key Operator
General Settings:
Changing the Initial Machine Modes
● Power On Default Mode, Key Operator Mode, etc.
(See page 54)
For Key Operator:
Paper Size, Department Counter, Network TCP/IP
settings, etc.
(See pages 54 - 56)
■ Procedure
Select a desired setting by pressing keys.
1
2
Select a Function
: General Settings
or
COPY
: General/Copier
Settings
FAX/EMAIL : Fax/Email Settings
: Copier Settings
SCAN/FILE : Scanner Settings
PRINT
: Printer Settings
: Printer Settings
Scanner Settings (Scan Parameters)
(See page 74)
NOTE:
COPY, FAX/EMAIL and SCAN/FILE
function selection keys are available only on
DP-8020E/8020P.
Fax/Email Settings
Refer to Operating Instructions
(For Facsimile and Internet Fax/Email)
● Please refer to the appropriate operating instructions manual for function settings on options.
● Function setting is accessible only when the machine is in Ready Mode.
● Fax/Email Settings are only available when optional Fax Communication Board is installed.
(See page 69)
NOTE
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Copier Settings:
Printer Settings:
Changing the Initial Copier Modes
● Default function of each copy mode.
(See pages 57 and 58)
For Key Operator:
Original mode, Contrast, etc.
(See pages 58 and 59)
Changing the Initial Printer Modes
● Default function of each print mode.
(See page 59)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data handling, etc.
(See page 60)
● Normally, you do not need to set the Printer Settings.
Special Printer Settings may be required when printing
text data directly to the printer from the MS-DOS
command prompt.
Scanner Settings:
Fax/Email Settings:
Changing the Initial Scanner Modes
● Original mode, Compression mode, Resolution, etc.
(See page 61)
Changing the Initial Fax/Email Modes
Refer to Operating Instructions (For Facsimile & Internet
Fax/Email).
3
4
5
Setting the desired Function
Select a mode with the Cursor Key or
Keypad
Parameter(s).
Select a setting with the Keypad.
Confirm a setting with the SET
Key.
or
Exits this
Function
Mode
When selecting the Key Operator Mode:
(Ex: General Settings)
4
5
6
Set the desired Function Parameter(s).
09 KEY OPERATOR MODE
ENTER PASSWORD=_
Exits this
Function
Mode
Select a mode with the Cursor Key or
Keypad.
Select a setting with the Keypad.
Input the Key
Operator Password
(3-digit)
Confirm a setting with the SET Key.
3
(See page 13)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
■ General Settings
Initial
Setting
No.
Modes
Function
00
POWER ON DEFAULT
Selects the default operation mode.
1:COPY / 2:FAX / 3:PRINTER / 4:SCANNER
(Fax is option, see page 69)
1: COPY
01
SORT MEMORY USAGE
Selects whether to display the amount of sort
memory used on the control panel.
1:OFF / 2:DISPLAY
1: OFF
02
03
07
09
DEPT. COUNTER
Displays the Total Copy usage and copy limit of Consult your authorized
the selected department.
Panasonic dealer
SORT-ROTATE
Selects the rotate-sort mode.
1:OFF
1:OFF / 2:ON (Available for Letter size paper only)
MANUAL ADD TONER
KEY OPERATOR MODE
Adds toner manually.
PRESS SET TO SELECT
Inputs the key operator password.
ENTER PASSWORD =
NOTE: When inputting the above General Settings numbers, there is no need to input the "0" for the first digit, input
only the second number of the two digit display.
The following Parameter Settings require the input of the Key Operator Password:
■ General Settings (For Key Operator)
Initial
Setting
No.
Modes
GENERAL LIST
Function
00
Prints the general settings list, and meter count
readings.
PRESS SET TO PRINT
01
PAPER SIZE
Selects the Paper Tray and sets the Paper Size.
(See page 62)
1:TRAY-1 / 2:TRAY-2 / 3:TRAY-3 / 4:TRAY-4
(TRAY-2 to 4 are option)
LETTER → LETTER
→ INVOICE
→
A3
→ B4
→ A4 → A4
→ B5
→
B5
FLS2
→ A5 → A5
→ LEDGER
→ FLS1
→ LEGAL
→
→
03
04
AUTO RESET TIME
Selects the Control Panel reset time.
1:OFF / 2:30 sec / 3:1 min. / 4:2 min. / 5:3 min. /
6:4 min.
3:1 min.
ENERGY SAVER MODE
Sets the Energy Saver mode and time.
1:INVALID / 2:POWER SAVER / 3:SLEEP /
4:SHUTDOWN
3:SLEEP
10 min.
Power Saver mode timer: 1-240 min.
Sleep/Shutdown mode timer: 1-240 min.
05
ENERGY SAVER TIME
Sets the Energy Saver Timer (Sleep or
Shutdown mode).
Start00:00
End00:00
Start (ON) : 00:00 End (OFF) : 00:00
Input the Start and End time with Cursor Keys
and Keypad. Once you set the above timer, the
set timer repeats everyday.
06
07
LANGUAGE DEFAULT
SPECIAL TRAY 1
Selects the default message language for the
display.
1:A-ENGLISH / 2:C-FRENCH / 3:SPANISH
1:A-ENGLISH
Selects the paper tray to use for special paper. 1:NONE
1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /
5:TRAY-4 / 6:BYPASS
(Only available when optional TRAY-2 and 3/4
are installed. see page 69)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
■ General Settings (For Key Operator) (Continued)
Initial
No.
Modes
SPECIAL TRAY 2
Function
Setting
08
Selects the paper tray to use for special paper. 1:NONE
1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /
5:TRAY-4 / 6:BYPASS
(Only available when optional TRAY-2 and 3/4
are installed. see page 69)
09
10
KEY/TOUCH BEEP
BYPASS SET BEEP
Selects the default key sound level.
1:OFF / 2:SOFT / 3:LOUD
2:SOFT
Selects whether to sound a Beep when paper is 1:INVALID
set on the Sheet Bypass.
1:INVALID / 2:VALID
11
12
ORIG.SET BEEP ADF
PAPER OUT ROTATE
Selects whether to sound a Beep when paper is 2:VALID
placed on the ADF.
1:INVALID / 2:VALID
Machine will automatically rotate the image to
accommodate the orientation of the paper in another
Tray and print when the selected Tray is empty.
1:OFF / 2:ON
1:OFF
13
16
DEPT. COUNTER MODE
LANGUAGE PRIORITY
Monitors the copy usage of each department.
1:TOTAL COUNTER
2:DEPT. COUNTER
Consult your
authorized
Panasonic dealer
3:DEPARTMENT LIST
Selects whether to enable the language
selection menu to display when the machine
comes out of the Energy Saver Mode, or when
the RESET button is pressed once.
1:OFF / 2:ON
1:OFF
17
18
DATE & TIME
Sets the date and time.
(Month, Day, Year, Time)
Input the date and time with Cursor Keys and
Keypad.
DAYLIGHT TIME
Set Daylight Time according to your local
regulation.
2: MAR 2nd
1: OFF
: Daylight Time is not applied
2: MAR 2nd : From 2 a.m. on the 2nd Sunday
of March to 2 a.m. on the 1st
Sunday of November
• The date setting shown above reflects the New
Regulation starting in 2007. In 2006, the Daylight
Time will end on the Last Sunday of October.
3: APR 1st : From 2 a.m. on the 1st Sunday of
April to 2 a.m. on the Last Sunday
of October
1,
2
* *
19
20
21
22
IP ADDRESS (DHCP)
Displays the IP Address which was reserved by
DHCP server.
1,
2
* *
SUBNET MASK(DHCP)
Displays the Subnet Mask Address which was
reserved by DHCP server.
1,
2
* *
DEF. G/W IP(DHCP)
Displays the Gateway IP Address which was
reserved by DHCP server.
3
∗
DHCP DEFAULT
Selects whether to enable the DHCP.
1:INVALID / 2:VALID
2:VALID
<continue on the next page.>
NOTE ∗1 When setting other than DHCP server Network settings, Parameter No. 22 (DHCP DEFAULT) should be set to “INVALID”
first, then setup Parameters No.19 to 21.
∗2 When Parameters No. 19 to 23 (except 22) are set, cycle the power by turning the Power Switch on the Right Side of the
machine OFF and ON.
∗3 When not connecting to LAN, the setting of DHCP should be on INVALID. When the setting of DHCP is on VALID, and the
machine is in Shutdown Mode, the machine will not answer an incoming Fax call.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
■ General Settings (For Key Operator) (Continued)
Initial
Setting
No.
Modes
Function
2
∗
23
DNS SERVER ADDR.
Selects whether to enable the DNS Server, and 2:VALID
sets its settings for Internet Fax/Email Function.
1:INVALID
2:VALID
<Sub-Function>
1:HOST NAME / 2:DOMAIN NAME /
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
24
25
MAC ADDRESS
Indicates the MAC address.
4
∗
HARD DISK FORMAT
Formats the hard disk.
PRESS SET TO START
4
∗
26
27
28
HARD DISK ERR CHK
ABBR GROUP ID
Selects the provision for the hard disk error check.
PRESS SET TO START
Inputs the Group ID for the address book.
0-99
0
5
5
∗
∗
COMMUNITY NAME(1)
Selects whether to change the Community
Name(1) SNMP.
Enable read only
public
29
COMMUNITY NAME(2)
Selects whether to change the Community
Name(2) SNMP.
public
Enable read/write
5
∗
30
31
33
DEVICE NAME
Inputs the device name when required.
(For Status Monitor/EtherTalk Machine Name)
5
∗
DEVICE LOCATION
Inputs the device location when required.
(For Status Monitor)
6
∗
USER AUTH
Set the User Authentication Mode.
COPY
1:INVALID / 2:VALID
FAX
1:INVALID / 2:VALID
PRINTER
1:INVALID / 2:VALID
SCANNER
1:INVALID / 2:VALID
INVALID
INVALID
INVALID
INVALID
34
AUTH DOMAIN
Inputs the Authentication Domain Name
Domain Name: Up to 15 characters.
DNS Domain Name: Up to 60 characters.
NOTE ∗4 Available only when the optional Hard Disk Drive Unit is installed.
∗5 When Parameters No. 28 to 31 are set, cycle the power by turning the Power Switch on the Right Side of the
machine OFF and ON.
∗6 About the User Authentication, See Operating Instructions "For User Authentication".
56
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Copier Settings
Initial
No.
Modes
MARGIN DEFAULT
Function
Setting
00
Selects the margin shift value.
1:POSITION / 2:VALUE
1:LEFT
10 mm
<Sub-Function>
1:LEFT / 2:RIGHT / 3:TOP / 4:BOTTOM
Procedure:
Select "1:POSITION" and select a Margin
position then, select "2:VALUE" and input a shift
value with Keypad.
01
EDGE DEFAULT
Selects the edge width.
1:EQUAL RATE (X & Y) / 2:INDIVIDUAL
1:EQUAL RATE
(X & Y)
Procedure:
5 mm
Select "1:EQUAL RATE (X & Y) " or
"2:INDIVIDUAL" then, input a edge value with
Keypad.
EQUAL RATE (X & Y): same edge value
INDIVIDUAL: different edge values (X and Y)
02
03
04
05
BOOK MARGIN DEF.
FRAME MARGIN
2-SIDED MODE DEF.
N in 1 DEF.
Selects the book void width.
5 - 99 mm
20 mm
Select whether to set the frame margin.
1:INVALID / 2:VALID
1:INVALID
1:OFF
Selects the default duplex priority mode.
1:OFF / 2:1→2 / 3:2→2 / 4:BOOK→2
Selects the N in 1 default mode.
Procedure: Select a Function
(ex: ORIENTATION) then, select
a Sub-Function (ex: PORTRAIT)
1:ORIENTATION
1:ORIENTATION
<Sub-Function>
For Ledger/
Letter-R/Invoice
2:L-SCAPE
Select from the following original sizes:
For Legal/Letter
1:PORTRAIT
). 2:LAYOUT
<Sub-Function>
1:2 in 1
Ledger (
), Legal ( ), Letter ( ),
Letter-R ( ), Invoice ( ) or Invoice-R (
<Sub-Function>
1:PORTRAIT / 2:L-SCAPE
2:LAYOUT
<Sub-Function>
1:L->R
<Sub-Function>
1:2 in 1 / 2:4 in 1
<Sub-Function: 2in1>
1:L→R / 2:R→L
<Sub-Function: 4in1>
1 2
3 4
1 3
2 4
2 1
4 3
3 1
4 2
1:
/ 2:
/ 3:
/ 4:
06
07
N in 1 WITH FRAME
DIGITAL SKYSHOT
Selects whether to enable the edge deletion.
1:INVALID / 2:VALID
1:INVALID
2:NORMAL
Selects the default digital skyshot mode.
1:OFF / 2:NORMAL / 3:QUALITY
08
09
10
MANUAL SKYSHOT
AUTO EXPOSURE
SORT PRIORITY ADF
Selects whether to enable the Manual Skyshot. 1:OFF
1:OFF / 2:M1 ON / 3:M2 ON / 4:M1,M2 ON
Selects whether the auto exposure is enabled. 2:VALID
1:INVALID / 2:VALID
Selects the sort priority when using the ADF.
1:NON-SORT / 2:SORT
2:SORT
<continue on the next page.>
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
■ Copier Settings (Continued)
Initial
Setting
No.
Modes
Function
11
SORT PRIOR. GLASS
Selects the sort priority when using the Platen. 1:NON-SORT
1:NON-SORT / 2:SORT
12
13
14
1→2 BINDING DEF.
2→1 BINDING DEF.
BOOK → 2 DEFAULT
Selects the binding location for 1→2 Copy.
1:LONG EDGE / 2:SHORT EDGE
1:LONG EDGE
Selects the binding location for 2→1 Copy.
1:LONG EDGE / 2:SHORT EDGE
1:LONG EDGE
Selects the page layout of the Book→2 copy.
1:BOOK FORMAT
1:BOOK FORMAT
2:FLIPPING
<Sub-Function>
1:FACING / 2:FLIPPING
2:PAGE ORDER
2:PAGE ORDER
1:L→R
<Sub-Function>
1:L→R / 2:R→L
15
16
19
IMAG. REPEAT DOT.
2 PAGE MODE DEF.
KEY OPERATOR MODE
Selects whether to print the dotted line.
1:NONE / 2:PRINT
2:PRINT
Selects the page order of 2 page copy.
1:L→R / 2:R→L
1:L→R
Inputs the key operator password.
ENTER PASSWORD =
The following Parameter Settings require the input of the Key Operator Password:
■ Copier Settings (For Key Operator)
Initial
Setting
No.
Modes
Function
00
COPY SETTING LIST
Prints the copier settings list.
PRESS SET TO PRINT
01
02
03
ORIGINAL (HOME)
TEXT CONTRAST
T/P CONTRAST
Selects the halftone default setting.
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
2:TEXT/PHOTO
Selects the default contrast setting for the Text mode.
1-5
3
3
Selects the default contrast setting for the Text/Photo
mode.
1-5
04
05
06
PHOTO CONTRAST
MAX. COPY SETTING
M1,SIZE
Selects the default contrast setting for the Photo mode.
1-5
3
Select the maximum number of copies allowed per job. 999
1-999
Inputs the frequently used size in job memory 1. 70 x 160 mm
Procedure:
Input X size (5 - 432) and press SET Key then,
input Y size (5 - 297) with Keypad.
07
M2,SIZE
Inputs the frequently used size in job memory 2. 95 x 220 mm
Procedure:
Input X size (5 - 432) and press SET Key then,
input Y size (5 - 297) with Keypad.
08
09
MEM. FULL ACTION
TONER SAVE (TEXT)
Selects the action to take during memory full condition. 1:PRINT
1:PRINT / 2:CANCEL
Selects the Toner Save Level to use for the Text mode. 1:NONE
1:NONE / 2:LEVEL1 / 3:LEVEL2
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial
Setting
No.
Modes
Function
10
TONER SAVE (T/P)
Selects the Toner Save Level to use for the
Text/Photo mode.
1:NONE
1:NONE / 2:LEVEL1 / 3:LEVEL2
11
12
TONER SAVE (PHOTO)
SADF DEFAULT
Selects the Toner Save Level to use for the
Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
1:NONE
Selects whether the Job Build and SADF Mode 1:OFF
is enabled.
1:OFF / 2:ON
■ Printer Settings
Initial
Setting
No.
Modes
Function
00
01
NUMBER OF PRINTS
PAPER SIZE
Sets the default number of prints.
1-999
1
Sets the default paper size setting.
LETTER / INVOICE / FLS1 / FLS2 / A3 / B4 /
A4 / B5 / A5 / LEDGER / LEGAL
LETTER
02
03
04
05
PAPER TRAY
Sets the default Paper Tray selection.
AUTO / BYPASS / TRAY-1 / TRAY-2 / TRAY-3 / TRAY-4
Auto
PRINT DIRECTION
PRINT DATA
Sets the default print orientation setting.
1:PORTRAIT / 2:L-SCAPE
1:PORTRAIT
Determines the provision of the print data.
PRESS SET TO PRINT
2-SIDED PRINT
Selects whether the 2-Sided print setting is
1:OFF
enabled.
1:OFF / 2:ON
06
07
08
09
10
11
12
13
14
BIND POSITION
RESOLUTION
Sets the default bind position.
1:LONG EDGE / 2:SHORT EDGE
1:LONG EDGE
Sets the default resolution setting.
1:300dpi / 2:600dpi / 3:1200dpi
2:600dpi
0
1
∗
FONT (PCL)
Sets the default PCL font.
0-99
1
∗
SYMBOL TABLE (PCL)
Sets the default PCL symbol table.
0-35
11
1
∗
PITCH (PCL)
Sets the default PCL pitch.
0.44-99.99
10.00
12.00
60
1
∗
POINT SIZE (PCL)
Sets the default PCL point size.
4.00-999.75
1
∗
LINES/PAGE (PCL)
Sets the default PCL lines/page.
5-128
1
∗
RETURN CHARACTER (PCL)
Sets the default PCL return character.
1:CR / 2:CR+LF
1:CR
MUTUAL A4/LETTER
Selects whether the mutual size A4/LETTER is 1:OFF
enabled.
1:OFF / 2:ON
2
∗
15
19
MAILBOX MEMORY
Indicates the mailbox memory status.
PRESS SET TO SELECT
KEY OPERATOR MODE
Inputs the key operator password.
ENTER PASSWORD =
∗1 Available only when the optional Printer Controller Module is installed.
∗2 Available only when the optional Hard Disk Drive Unit is installed.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
The following Parameter Settings require the input of the Key Operator Password:
■ Printer Settings (For Key Operator)
Initial
Setting
No.
Modes
Function
00
PRINTER SETTINGS
Prints the printer settings.
PRESS SET TO PRINT
01
02
COMPLETION TIME
PAGE PROTECTION
Sets the job completion time setting.
1-999SEC
180SEC
Selects whether to enable automatic
compression when the received data exceeds
the page memory capacity.
1:OFF
(This is accomplished by reducing resolution,
and/or deleting pixels to fit the data onto the
available page memory, then print it out.)
When the setting is in the "OFF" position, upon
exceeding the page memory capacity, the print
job is deleted and an Error message is displayed.
1:OFF / 2:ON
03
04
05
06
07
08
09
ERROR PAGE PRINT
SPOOL FUNCTION
TEXT PRINT
Selects whether to print the error page.
1:OFF / 2:ON
2:ON
2:ON
2:ON
Selects whether to enable the spool function.
1:OFF / 2:ON
Selects whether to print the text page only.
1:OFF / 2:ON
1
∗
PS CONFIGURATION
Prints the PS configuration page.
PRESS SET TO PRINT
2
∗
FONT LIST PRINT (PCL)
Prints the PCL font list.
PRESS SET TO PRINT
1
∗
FONT LIST PRINT (PS)
Prints the PS font list.
PRESS SET TO PRINT
3
∗
MAILBOX DATA HOLD
Selects the automatic holding time frame for the 7 DAYS
mailbox data.
Infinity / 1 DAY / 2 DAYS / 3 DAYS / 4 DAYS /
5 DAYS / 6 DAYS / 7 DAYS
3
∗
10
11
12
DELETE MAILBOX
PRINT QUEUE DEL
Selects whether to delete All the mailbox data or
only the data Before the time frame selected in
the "09 Mailbox Data Hold" setting.
1:ALL / 2:BEFORE
Selects whether to disable the Key Operator's
Password (authorization) requirement to delete
the print queue.
2:KEY OP.
1:FREE / 2:KEY OP. (Operator)
1
∗
APPLETALK ZONE
Inputs a AppleTalk zone name.
∗1 Available only when the optional Multi Page Description Language Controller Module is installed.
∗2 Available only when the optional Printer Controller Module is installed.
∗3 Available only when the optional Hard Disk Drive Unit is installed.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Scanner Settings (Scan Parameters)
Initial
Setting
No.
Modes
Function
00
SCANNER SETTINGS
Prints the scanner settings.
PRESS SET TO PRINT
01
02
03
04
ORIGINAL MODE
COMPRESSION MODE
RESOLUTION
Selects the default Halftone setting for the originals. 2:TEXT/PHOTO
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
Selects the default compression mode setting. 4:JBIG
1:MH / 2:MR / 3:MMR / 4:JBIG
Sets the default resolution setting.
1:STANDARD / 2:FINE / 3:S-FINE
3:S-FINE
BIND POSITION
Selects the default bind position of 2-Sided
1:LONG EDGE
original. 1 (See below)
∗
1:LONG EDGE / 2:SHORT EDGE
05
06
FILE TYPE/NAME
Selects the default File Type format.
1:TIFF / 2:PDF
1:TIFF
CHANGE KEYBOARD
Selects the Keyboard Type when One Touch
1:QWERTY
2
∗
Sheet is changed on the Keyboard
1:QWERTY / 2:QWERTZ / 3:AZERTY
1 When scanning the 2-Sided original, use the optional i-ADF.
∗
2 When the optional Keyboard (DA-KB180) is installed.
∗
<Bind Position of 2-Sided Original>
Long Edge Short Edge
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
For Example
■ Changing the Paper Size (Paper Tray)
The Paper Trays are designed to accommodate Invoice, Letter, and Legal Size paper.
1
2
3
FUNCTION MODE (1-2)
1:GENERAL SETTINGS
ENTER NO. OR ∨
PRESS SET TO SELECT
^
or
1: General Settings
Select a Paper Tray
6
7
8
KEY OPR.MODE (00-34)
01 PAPER SIZE
ENTER NO. OR ∨
1:TRAY-1[LETTER
]
^
or
1:TRAY-1
01 PAPER SIZE
2:TRAY-2
3:TRAY-3
4:TRAY-4
NOTE: TRAY-2, 3, 4 are options
(See page 69)
12
13
14
Paper Tray
Paper Guide B
Paper Guide A
Paper Guide A Length Adjustment
Paper Guide B Adjustment
ex. Paper Tray-1
NOTE
It is recommended that the paper guide B is fixed in place with a screw,
consult your authorized Panasonic dealer for details on how to fasten the
guide.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
GENERAL PARAM. (0-9)
ENTER NO. OR ∨
09 KEY OPERATOR MODE
ENTER PASSWORD=
^
6
or
3-digit
(See page 13)
9 (09 KEY OPERATOR MODE)
10
9
11
TRAY-1
LETTER
When setting
another Paper
Tray, repeat steps
7 to 9
∨
^
12
Select a
Paper Size
LETTER
LETTER
INVOICE
A3
A4
A4
B5
B5
A5
A5
FLS1
FLS2
LEDGER
LEGAL
B4
15
Paper Tray
Change the Paper Size Indicator
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
For Example
■ Department Counter
The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers
for each department. (Maximum Number of Departments: 300)
Contact your authorized Panasonic dealer to enable the Department Counter feature.
1
2
3
FUNCTION MODE (1-2)
ENTER NO. OR
∨
^
or
1: General Settings
6
7
KEY OPR. MODE(00-34)
ENTER NO. OR
13 DEPT. COUNTER MODE
1: TOTAL COUNTER
∨
^
or
13 (DEPT. COUNTER MODE)
For Department Counter
10
11
DEPT. COUNTER
001 123450
DEPT. COUNTER
001 123145
MAX COPIES
001 123456
ID CODE
001 0123
SET
SET
SET
DEPT. COUNTER
002 123500
MAX COPIES
002 125000
Clear the
counter to "0".
ID CODE
002 45678
SET
SET
Next Department
or
64
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
GENERAL PARAM. (0-9)
ENTER NO. OR
09 KEY OPERATOR MODE
ENTER PASSWORD=
∨
^
6
or
3-digit
(See page 13)
9 (09 "KEY OPERATOR MODE")
For Department Counter
For ID (Identification) Code
9
8
DEPT. CODE (1-300)
ENTER NO. OR ∨
DEPT. COUNTER
001 123145
ID CODE
001 12345678
^
10
Department
No (01-300)
ID Code
(1 to 8-digit)
Clear the
counter to "0".
For Maximum Copies
For ID (Identification) Code
12
MAX COPIES
001 12345678
ID CODE
001 12345678
Maximum
number of
Copies (8-digit)
ID Code
(1 to 8-digit)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
For Example
■ Network Settings
When the Parameter No. 22 (DHCP DEFAULT)
is set to “INVALID”, the Key Operator must
administer the Network settings manually.
Enter these required Network Setting:
Parameter No. 19 (TCP/IP ADDRESS), 20
(TCP/IP SUBNET MSK) and 21 (TCP/IP G/W
ADDR.), in the same manner as shown in the
following example.
1
2
Same procedure as
steps 2 to 5 above.
6
19 TCP/IP ADDRESS
19 TCP/IP ADDRESS
192.168.1.100
Input the TCP/IP Address
Ex.: 192.168.1.100
Use the “ ” key to enter a
period.
1 → 9 → 2 →
→ 1 → 6 → 8 →
→ 1 → → 1 → 0 → 0
10
Turn the Power Switch
on the Right Side of the
machine OFF and ON.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Select 19
(TCP/IP ADDRESS)
KEY OPR. MODE (00-34)
ENTER NO. OR
22 DHCP DEFAULT
2:VALID
∨
^
:INVALID
6
or
(4 times)
22 (DHCP DEFAULT)
7
8
9
20 TCP/IP SUBNET MSK
21 TCP/IP G/W ADDR.
Input the Subnet Mask
same procedure as in
step 6.
Input the Gateway
Address same procedure
as in step 6.
10
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Combined Function Table
Next
Selections
First
Selections
1
2
1
∗
2
2
∗
2
Book
2
2 Page
N in 1
Sort/Rotate-Sort
Non-Sort
Zoom
Edge
Book
Margin
Image Repeat
Centering
Interrupt
Manual Skyshot
Digital Skyshot
Double Exposure
: Possible Combined Functions.
: Unavailable Combined Functions.
A : Next Selection is Carried Out.
R : When the same function is selected twice, the second selection is ignored.
: Functional combination that cannot be performed.
NOTE: While making copies with the 2 1 or 2 2 Copy using the optional ADF (DA-AS181), the
∗
Interrupt mode cannot be selected.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Components
■ The DP-8020E/8020P/8016P is a digital photocopier which can produce images with great clarity.
Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and
supplies.
We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
■ Options
Image Memory
(DA-SM16B/64B/28B)
ADF
(DA-AS181)
● 16/64/128 MB
i-ADF
● To increase the memory capacity for electronic
(DA-AR202)
● Duplexing
● For DP-8020E only
sorting.
Hard Disk Drive (HDD) Unit
(DA-HD18)
● This option also requires at least 16 MB of
optional Sorting Image Memory (DA-SM16B)
● For PS Printing (for Fonts),
Security Print/Mailbox,
Account Management
For DP-8020E/8020P only:
Keyboard
(DA-KB180)
● For Fax/E-Mail,
Network Scanner
Function
(For DP-8020E/8020P
only)
For Concurrent Copy, Electronic Sorting
Memory, PS/PCL Print Job Spooling
Expansion Board
(DA-EM600)
● Expansion F-ROM (8 MB)
2nd/4th Paper
Tray
(DA-DS184)
4th: For DP-8020E/8020P
only
Printer Controller Module
(DA-PC820)
● Printer Controller for PCL6
∗
Multi Page Description Language
Controller Module
(DA-MC820) (For DP-8020E/8020P only)
∗
● Printer Controller for PS /PCL6
3rd Paper Tray
(DA-DS185)
(For DP-8020E/
8020P only)
Fax Communication Board
(DA-FG180)
(For DP-8020E/8020P only)
■ Supplies
Part Name
Toner
Part No.
Remarks
DQ-TUJ10K
Toner
X-Stamp for Fax Option
Verification Stamp
DZHT000027
PCL6 is a Page Description Language of the Hewlett-Packard Company.
PS is a Page Description Language of the Adobe Cooperation.
∗
NOTE
● Contact your authorized Panasonic dealer for details on options combination.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanner
Document Scanning
■ Document Scanning
When Panasonic Document Management
System is installed and configured on your
PC, document(s) can be scanned from the
machine to your PC.
1
2
For ADF
Direct Connection
(with Crossover Cable, see page 76)
● Document Scanning directly from the
Machine to your PC using Windows “My
Network Places” or “Network
Neighborhood”.
1
∗
For i-ADF
NOTE:
Original Size
(From Platen only)
or
USB Port is used for printing only, and is
not available for local scanning.
LDR
LGL
LTR
LTR
INV
: Ledger
: Legal
NOTE
If the PC's address (IP Address) is not
shown on the LCD of the machine, register
the PC's address with the Communications
Utility software. (See page 72)
: Letter
: Letter-R
: Invoice
1 When scanning the 2-
Sided original, use the
optional i-ADF.
∗
INV
: Invoice-R
● When entering letter(s), use either of the
following methods.
When selecting the scanning resolution/contrast:
2 When scanning the 2-Sided
With Keypad
ex. SALES
∗
original, select bind position of
original.
(See page 27)
S
A
L
E
S
S-FINE : 600 x 600 dpi
FINE : 300 x 300 dpi
When the TEXT mode is selected
as follows and S-FINE and FINE
are not selected : 150 x 150 dpi
x9
ex. ABC
A
x5
x7
x6
x9
2-Sided
Original
2
∗
B
C
x5
x6
x7
Select type of Original(s)
PHOTO
: Mainly Photo
TEXT/PHOTO : Text and Photo
• To delete a Character / Symbol, press
[CLEAR] .
• To enter a space, press [MONITOR] .
combined
TEXT
: Mainly Text
Adjust the Manual Exposure
Press DARKER or LIGHTER
Key (5 steps)
With Keyboard
When optional Keyboard (DA-KB180) is
installed:
When adding a file name or selecting the compression format.
(See page 74)
4
When inputting a special
character, press "_/()···" Key.
When using ADF/i-ADF
• Skip to step 8
SCANNING DOCUMENT
PAGES=001 00%
From Platen only
ANOTHER ORIGINAL?
1:YES 2:NO
or
1: YES
Go to next step
2: NO
Skip to step 8
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a Station (PC's Address)
3-1
3-2
3-3
ABBR
4
ABBR No.
(2-digit)
ABBR [_ ]
ENTER ABBR No.
[01]SALES
10.74.252.66
DIRECTORY
SEARCH
3-1
3-2
3-3
4
Enter letter(s)
ENTER LETTER(S)
_
ENTER LETTER(S)
SA_
[06]SALES_3
[05]SALES_2
10
10
3
[01]SALES
3
10.74.252.66
ONE-
TOUCH*
3-1
3-2
NOTE
"ONE-TOUCH" is
available when the
optional Keyboard (DA-
KB180) is installed.
4
Keyboard (Option)
<10>PANA
10.74.252.63
5
6
7
8
PRESS START
LTR
ANOTHER ORIGINAL?
1:YES 2:NO
DATA IS BEING
TRANSFERRED TO PC
1:YES
Continues to scan another
original(s), repeat steps 5
and 6.
TRANSFER COMPLETED
2:NO
No next original.
Next Original
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanner
Address Book
■ Adding your PC's IP Address
If the Scanner Configuration is not set with the Communications Utility of Panasonic Document Management System
software, setup the Communications Utility software by following the steps below.
1
2
2
1
2
1
Right-Click "Panasonic Communications
Utility" icon on the Task Bar, and then select
"Scanner Configuration...".
Refer to right column.
You can change the Name, and
Key Name in this window.
Check "Auto Registration", and then enter the
Name and Key Name to be saved into the
machine. (Max. 15 characters)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Click "Add Device" if
your PC address
information is registered
on the machines located
on a different subnet.
Click "OK".
Click "Add".
1
4
Click "OK".
1
4
Enter the
machine’s
Device
Name, and
IP Address.
2
3
2
3
Click "OK".
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanner
Function
■ Scan Parameters (Scanner Settings)
1
3
2
SEP-02-2006 04:28
READY TO SCAN
FUNCTION
ENTER NO. OR ∨
(1-2)
^
or
1: SET MODE
Refer to Function settings on page 61.
● Prints Scanner Settings List,
Sets Original Mode,
7
SCAN PARAM
ENTER NO. OR
(0-6)
∨
^
Sets Compression Mode,
Sets Resolution,
or
Sets Bind Position,
Sets File Type/Name
■ Select Mode
When adding a file name or selecting a compression format before scanning document(s).
1
2
3
SEP-02-2006 04:28
FUNCTION
(1-2)
READY TO SCAN
ENTER NO. OR ∨
^
or
2: SELECT
MODE
For Scan File Name
6
7
8
1:SCAN FILE NAME ?
PRESS SET TO SELECT
FILE TYPE=TIFF
FILE NAME=DATE&TIME
1:TIFF 2:PDF
1:DATE&TIME 2:CUSTOM
: DATE & TIME
: TIFF
: PDF
or
or
: CUSTOM
(When Selecting Custom)
SCAN FILE NAME
ENTER NAME
Enter a File Name
(See page 70)
74
Download from Www.Somanuals.com. All Manuals Search And Download.
6
4
5
1:SET MODE ?
PRESS SET TO SELECT
SET MODE
ENTER NO. OR ∨
(1-2)
2:SCAN PARAMETERS ?
PRESS SET TO SELECT
^
7
or
4
5
2:SELECT MODE?
PRESS SET TO SELECT
SELECT MODE
ENTER NO. OR ∨
(1-2)
^
6
or
: Scan File Name
: Compression
or
For Compression
6
7
2:COMPRESSION ?
PRESS SET TO SELECT
COMPRESSION : JBIG
3:MMR 4:JBIG
: MH
: MR
: MMR
: JBIG
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scanner
Direct Connection (with Crossover Cable)
■ Direct Connection (with Crossover Cable)
Connect a Crossover LAN Cable between your machine
and the PC.
1
2
∗
Turn OFF the Power
Switch (Machine and the
PC).
LAN Cable
(Crossover)
To PC
LAN Cable (Crossover)
To Machine
(Right Side of Machine)
(Rear Side of PC)
NOTE: Do not use Standard
LAN Cable.
5
6
7
∗
Turn OFF and ON the
Input your PC's IP
Scan the document(s) to
Power Switch (Machine
and the PC).
Address into the Address
Book in the machine (see
page 72) or into the
Panasonic Document
Management System
software (refer to the
enclosed CD).
your PC. (See page 70)
NOTE:
If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13.
∗
76
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Turn On the Power Switch
(Machine and the PC).
Input the Network Address
(Machine and your PC).
∗
● IP and Gateway Address
5
IP:
192.168.0.1 (Machine)
192.168.0.2 (Your PC)
Subnet Mask: 255.255.255.0
(Machine & the PC)
● How to input the network address:
NOTE:
If you use the DHCP
∗
server, select to disable
the DHCP server.
Machine: See page 55
Your PC: Consult your
System
For your Machine: See page 66
For your PC:
See below
Administrator.
For more detailed information, refer to Windows OS operating instructions manual.
For Windows 2000
5
6
3
4
Right click "My Network
Places" and select
"Properties".
Right click "Local Area
Connection" and select
"Properties".
1
2
7
Select "Internet
Protocol (TCP/ IP)".
Select "Use the
3
5
following IP address"
then, Input IP Address
and the Subnet Mask.
4 Click "Properties".
7 Click "OK".
6
Click "OK".
For Windows XP
2
4
5
3
Open the Control Panel.
Select "Switch to Classic
View", if using the
Category View Mode.
Right click "Local Area
Connection Enabled ........"
and select "Properties".
1
2
3
4
Select "Network
Connections".
7
Select the "Internet
Protocol (TCP/ IP)".
5
Select "Use the following IP
7
8
5
address" then, Input IP
Address and the Subnet
Mask.
6
9
Click "Properties".
Click "CLOSE".
6
9
8
Click "OK".
"OK" will be changed to "CLOSE".
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Troubleshooting
Check
Action
Unit Does Not Operate
Check if the Power Switch (Main Power Switch
on the Right Side of the machine) is turned ON
and if the power cord is plugged into the AC
outlet.
Does the display light?
Does the Energy Saver key flash (or light)
and the display is turned OFF?
(See page 48)
Press Energy Saver key on the control panel.
Does any of the U## codes and messages
appear on the display?
(U01, U07, U13, U14....etc.)
Perform actions in accordance with each
message.
Does the Add Paper indicator and message
appear on the display?
Add paper. (See page 14)
Does the Misfed Paper indicator, message
and J## codes appear on the display?
Remove the misfed paper. (See pages 16 - 21)
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position. If the
error code does not clear, call your Service
provider.
Does E#-## codes and messages appear on
the display?
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Turn the Power Switch on the Right Side of the
machine to the OFF and ON position.
Light Copies
Does the exposure indicator say “LIGHTER”?
Press the “DARKER” button.
Does the Add Toner indicator and message
appear on the display?
Replace the Toner Bottle.
(See pages 16, 17)
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Check
Action
Marked Copies
Is the machine’s Platen Glass or Platen Sheet
dirty?
Clean the Platen Glass or Sheet.
Cover the original with a sheet of white paper
before copying or lighten the exposure setting.
Is the original an OHP film or a dark original?
If a dark verical line of
0.8-1.2 inch (2-3 cm) in
width is printed.
Clean the Corona Wire of the Drum Unit.
(See page 16)
Check the copies.
If a dark vertical line is remained, repeat
above step to clean the Corona Wire
became dark vertical line is erased.
■ If the measures outlined above do not solve the problem, call your Service provider.
Adjusting the Double Feed Switch (For DA-AS181)
■ When original(s) do not feed correctly, adjust the position of
the Double Feed Switch as follows:
Position of
Switch
Normal Operation
Original does not feed.
Several originals are fed
at one time
Double Feed Switch
Machine Care
Platen Glass/Platen Sheet
■ As a rule, clean weekly.
Wipe marks off with a cloth and a neutral detergent.
Wipe again with a dry cloth.
Platen Sheet
Platen (Glass)
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Solving
Replacing the Battery/Set the Date and Time
1
2
The machine has an internal battery
(Product No.: CR2032) which maintains
the date and time.
In the event the battery requires
replacement, the following message will
be displayed.
Battery Holder
Turn the Power Switch on
the Right Side of the
machine to the OFF
position.
If the Hard Disk Drive Unit
(DA-HD18) is installed, see
page 13.
REPLACE BATTERY
U90
Remove 1 Screw.
Remove the Battery Holder.
Set the Date and Time continues steps 6 to 13.
When setting the Date and Time, start
from step 6.
6
10
11
09 KEY OPERATOR MODE
ENTER PASSWORD=
KEY OPR.MODE (00-34)
ENTER NO. OR
∨
^
or
3-digit
(See page 13)
17 (DATE & TIME)
■ Notice: California only:
This product contains a CR Coin Cell Lithium Battery which contains
Perchlorate Material - special handling may apply.
● The service life of the battery is approximately 1 year under normal use.
NOTE
80
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Turn the Power Switch
on the Right Side of
the machine to the ON
position.
Battery Holder
New
6
Used
Reinstall the Battery Holder.
Install 1 Screw.
“+” side of battery should be
facing upwards.
(Observe the polarity, see
CAUTION! below)
7
8
9
FUNCTION MODE (1-2)
ENTER NO. OR ∨
GENERAL PARAM.(0-9)
ENTER NO. OR ∨
^
^
10
or
or
1: General Settings
9 (09 "KEY OPERATOR MODE")
12
13
17 DATE & TIME
_09-02-2006 00:01
Move the cursor (_) under
the Month/Date/Year/
Time that you wish to
change, then input the
new data using the
Keypad.
CAUTION
denotes hazards that could result in minor injury or damage to the machine.
● THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
"IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN
INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL
SOLID WASTE OFFICIALS AND LOCAL REGULATIONS"
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
■ DP-8020E/8020P/8016P (For Copier)
Type
Desk Top
Platen Type
Fixed
Acceptable Originals
Copying Method
Fusing Method
Imaging Method
Resolution
Sheets, Books (max. Ledger size)
Laser Indirect Electro Static
Heat Roller, and Pressure Roller
Dry-Type Dual Components Imaging
Max. 600 dpi
Operation Panel
Copy Size
LCD Display
Ledger - Invoice via Paper Tray and Bypass
Max. 0.2″ (5 mm)
Void Area
Warm Up Time
First Copy Time
Multi-Copy Speed
Approx. 30 seconds (68°F/20°C)
Less than 6.9 seconds (Letter, from 1st Tray)
∗
DP-8020E/8020P : 20 cpm (Letter size)
DP-8016P
: 16 cpm (Letter size) (From 1st Tray)
Enlargement Ratios
Reduction Ratios
Paper Feed
Preset:
Variable:
121%, 129%, 155%, 200%
from 101% to 200% in 1% increments
Preset:
Variable:
79%, 77%, 65%, 61%, 50%
from 99% to 50% in 1% increments
Standard Paper Tray (550 sheets) + Sheet Bypass (50 Sheets)
Optional Paper Trays (550 sheets x 3 )
(3rd and 4th Paper Trays are for DP-8020E/8020P only)
∗
Paper Weight
Paper Tray:
Bypass:
ADU:
16 - 24 lb (60 - 90 g/m2)
15 - 34 lb (55 - 133 g/m2)
17 - 24 lb (64 - 90 g/m2) (DP-8020E)
Quantity Selector
Max. 999 sheets (Output Tray capacity is 250 sheets/Letter size)
AC 120V, 60Hz, 12A
Electrical Consumption
Power Consumption
Dimensions (W)(D)(H)
Mass (Weight)
Max. 1.3 kW
22.0 x 21.9 x 18.1 in (558 x 557 x 460 mm)
DP-8020E :
DP-8020P /8016P : 93 lb (42.3 kg)
95 lb (43.3 kg)
∗
Operating Environment
Temperature: 50 - 86 °F (10 - 30 °C); Relative Humidity: 30 - 80 %
(However, the humidity should be 70 % or less at a temperature of 86 °F (30 °C),
and the temperature should be 80 °F (27 °C) or less at a humidity level of 80 %.)
DP-8020P is not available for USA and Canada.
∗
82
Download from Www.Somanuals.com. All Manuals Search And Download.
∗
■ Network Scanner (DP-8020E/8020P Only)
Scanning Type
CCD Image Sensor (ADF/Platen)
Scanning Speed
(w/o Transmission Time)
19 sheets/minute (Letter)
Resolution (dpi/Monochrome)
Max Scanning Area (Platen)
Max Scanning Area (ADF)
Duplex Scan
Standard (150x150) / Fine (300x300) / SuperFine (600x600)
11 x 17 in
11 x 17 in
No
Scanning Mode
Text, Text/Photo, Photo
Bi-level / 256-level Gray Scale
MH, MR, MMR, JBIG
Multi-page TIFF, PDF
Yes (Single Address only)
Yes (Single Address only)
N/A
Scale
Compression Format
File Format
Send to Station (PC)
Send to Station (FTP)
Send to Station (Printer)
Pop up Notification
Protocol
Yes
LPR, TCP/IP
Applicable OS
Windows 98 / Me / NT 4.0 / 2000 / XP
■ ADF (DA-AS181) Option/i-ADF (DA-AR202) (DP-8020E Only)
Tray Capacity
Letter, Invoice : 50 sheets (20 lb)
Ledger, Legal : 30 sheets (20 lb)
Original Size
Invoice/Letter/Legal/Ledger
14 – 28 lb (50 - 110 g/m2)
Supplied from the machine
Paper Weight
Electrical Requirements
Dimensions (W)(D)(H)
DA-AS181: 22.0 x 19.7 x 4.4 in (558 x 501 x 112 mm)
DA-AR202: 21.7 x 21.7 x 5.3 in (552 x 520 x 135 mm)
Mass (Weight)
DA-AS181: 11.0 lb (5.0 kg)
DA-AR202: 20.5 lb (9.3 kg)
■ 2nd/4th Paper Tray (DA-DS184), 3rd Paper Tray (DA-DS185) (Option)
∗
(3rd, and 4th Paper Tray for DP-8020E/8020P only)
Paper Size
Invoice/Letter/Legal/Ledger
16 – 24 lb (60 - 90 g/m2)
Paper Weight
Electrical Requirements
Dimensions (W)(D)(H)
Mass (Weight)
Supplied by the machine
22.0 x 21.2 x 5.0 in (558 x 538 x 128 mm)
DA-DS184 : 19.8 lb (9.0kg)
DA-DS185 : 20.7 lb (9.4kg)
● Specifications are subject to change without notice.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Options and Supplies
■ Options
Part Name
Part No.
DA-AS181
Remarks
Automatic Document Feeder
Also referred as ADF
Inverting Automatic Document
Feeder
DA-AR202
Also referred as i-ADF
(For DP-8020E only)
∗
2nd/4th Paper Tray
3rd Paper Tray
DA-DS184
DA-DS185
DA1D18A
DA1D18B
DA1D18C
DA-UC200
DA-SM16B
DA-SM64B
DA-SM28B
UE-410047
4th Paper Tray (For DP-8020E/8020P only)
∗
3rd Paper Tray (For DP-8020E/8020P only)
Plain Stand
For Standard 1 Tray Configuration
For 2 Paper Tray Configuration
For 3 & 4 Paper Trays Configuration
Plain Stand
Plain Stand
Platen Cover
Image Memory (16 MB)
Image Memory (64 MB)
Image Memory (128 MB)
Expansion Flash Memory Card, 4 MB
For Electronic Sorting
For Electronic Sorting
For Electronic Sorting
Additional Page Memory for Fax Communication Board
∗
(DP-8020E/8020P only)
Expansion Flash Memory Card, 8 MB
UE-410048
Additional Page Memory for Fax Communication Board
(DP-8020E/8020P only)
∗
8 MB Expansion Board
Printer Controller Module
DA-EM600
DA-PC820
DA-MC820
Additional Expansion for PCL and PS printing
Printer Controller for PCL6
Multi Page Description
Language Controller Module
Printer Controller for PCL6/PS3
∗
(For DP-8020E/8020P only)
Hard Disk Drive Unit
Keyboard
DA-HD18
DA-KB180
DA-FG180
DA-WA10
∗
For Fax/Internet Fax/Scanning (DP-8020E/8020P only)
∗
Fax Communication Board
Accounting Software
G3 Fax/Tel Communication (DP-8020E/8020P only)
For Accounting function
■ Supplies
Part Name
Part No.
DQ-TUJ10K
DZHT000027
Remarks
Toner
Toner
Verification Stamp
X-Stamp for Fax Option
DP-8020P is not available for USA and Canada.
∗
84
Download from Www.Somanuals.com. All Manuals Search And Download.
memo
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
When requesting information, supplies or service always refer to the model and serial number of your
machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine.
For your convenience, space is provided below to record information you may need in the future.
Model No.
Serial No.
Date of Purchase
Dealer
Address
Telephone Number
(
)
Supplies Telephone Number
(
)
Service Telephone Number
(
)
Download from Www.Somanuals.com. All Manuals Search And Download.
The following trademarks and registered trademarks are used throughout this manual:
Microsoft, Windows, Windows NT, Windows Server, Outlook & Windows logo are either registered
trademarks or trademarks of Microsoft Corporation in the USA and other countries.
Adobe, Acrobat Reader & Adobe logo are either registered trademarks or trademarks of Adobe Systems
Incorporated.
All other trademarks identified herein are the property of their respective owners.
PEERLESSPage™ is a trademark of the PEERLESS Systems Corporation; and,
PEERLESSPrint® and Memory Reduction Technology® are registered trademarks of PEERLESS
Systems Corporation; and, COPYRIGHT © 2002 PEERLESS Systems Corporation.
Universal Font Scaling Technology (UFST) and all typefaces have been licensed from Monotype Imaging.
Agfa® and the Agfa rhombus are registered trademarks of Agfa-Gevaert N.V. registered in the U.S.
Patent and Trademark Office and may be registered in other jurisdictions. Monotype® is a registered
trademark of AMT registered in the U.S. Patent and Trademark Office and may be registered in other
jurisdictions. ColorTune® is a registered trademark of Agfa-Gevaert N.V. registered in the U.S. Patent and
Trademark Office and may be registered in other jurisdictions. Profile Tool KitTM, Profile StudioTM and
Profile OptimizerTM are trademarks of AMT and may be registered in certain jurisdictions.
Copyright © 2005 Monotype Imaging Inc. All rights reserved.
Novell and NetWare are registered trademarks of Novell, Inc. in the United States and other countries.
PCL is either trademark or registered trademark of Hewlett-Packard Company and/or its subsidiaries.
Adobe, PostScript and PostScript 3 are either registered trademarks or trademark of Adobe Systems
Incorporated in the United States and/or other countries.
This equipment contains a number of programs licensed under the terms of the GNU General Public
License/GNU Lesser General Public License and other open software. For more details and applicable
license terms thereof, please refer to the relevant information in the CD attached herewith.
As an ENERGY STAR® Partner, Panasonic has determined that this product
meets the ENERGY STAR® guidelines for energy efficiency.
This voluntary program specifies certain energy consumption and usage
standards.
This product will automatically “power down” after a specified period of non-
use. The use of this ENERGY STAR® compliant product will reduce energy
consumption and ultimately benefit the environment.
The default functions can be adjusted depending on your office requirements.
Please ask your authorized Panasonic dealer for more details.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
Unauthorized copying and distribution is a violation of law.
The contents of these Operating Instructions are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
USA Only
WARRANTY
PANASONIC DIGITAL DOCUMENT COMPANY MAKES NO WARRANTIES, GUARANTEES OR
REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS
PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PANASONIC DIGITAL DOCUMENT COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT
TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY THE
CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC MACHINE.
SEE YOUR DEALER FOR DETAILS OF DEALER’S WARRANTY.
■ Notice: California only:
This product contains a CR Coin Cell Lithium Battery which contains
Perchlorate Material - special handling may apply.
For Service, Call:
Panasonic Digital Document Company
Unit of Panasonic Corporation of North America
One Panasonic Way
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario L4W 2T3
Secaucus, New Jersey 07094
K0906-1906 (01)
PJQMC0703ZB
September 2006
Published in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|