Operating and Installation
Instructions
Built-in Warming Drawer
ESW 4082-14
ESW 4088-14
ESW 47x2
ESW 48x2
en - US, CA
To prevent accidents
and machine damages,
read these instructions
before
installation or use.
M.-Nr. 07 342 380
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Correct usage
WARNING- When using your
Only use this appliance for warming
~
appliance follow basic precautions,
including the following:
food in residential settings, and for the
purposes described in this manual.
Other uses are not permitted and can
be dangerous.
Read all instructions before
installation or use to prevent injury
and appliance damage.
Persons who lack physical, sensory
~
or mental abilities, or experience with
the appliance should not use it without
supervision or instruction by a
responsible person.
This appliance conforms to all
uniform safety codes and
regulations.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Children
Close supervision is necessary
~
when any appliance is used by or near
children.
SAVE THESE INSTRUCTIONS
The appliance becomes hot during
~
use and remains hot for some time after
turning off. Keep children away from
the warming drawer until it has cooled
to a safe temperature.
Ensure that any packing material, is
~
disposed of safely and kept out of the
reach of children. Danger of
suffocation!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Technical safety
Do not operate any appliance with a
~
damaged cord or plug, or if the
Before installing the appliance,
~
check for externally visible damage. Do
appliance has been damaged in any
manner. Contact Miele’s Technical
Service Department.
not operate a damaged appliance.
Before installation make sure that
~
the voltage and frequency listed on the
Defective components should be
~
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
data plate correspond with the
household electrical supply. This data
must correspond in order to avoid risk
of damage to the appliance. If in doubt,
consult a qualified technician.
Before installation or service,
~
disconnect the power supply to the
work area by removing the fuse,
"tripping" the circuit breaker, or
unplugging the unit.
Be certain your appliance is
~
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
While the appliance is under
~
warranty repairs should only be
performed by an authorized service
technician. Otherwise the warranty is
any doubt, have the electrical system of void.
the house checked by a qualified
electrician.
Do not use an extension cord to
~
connect this appliance to electricity.
Do not use the appliance until it has
Extension cords do not guarantee the
~
been properly installed in the cabinetry. required safety of the appliance.
Never open the outer casing of the Do not install
~
~
outdoors.
appliance. Tampering with electrical
connections or components and
mechanical parts is dangerous and
could cause machine damage.
Installation, repair and maintenance
~
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Safety
Do not heat unopened food
~
containers. Pressure can build up
Protect your hands with oven mitts
~
causing an explosion that will damage
or potholders when using the
appliance. Use only dry, heat resistant
potholders. Moist or damp potholders
used on hot surfaces can result in
steam burns.
the cooking compartment. There is also
a danger of personal injury and
scalding.
Before serving, be sure food is at a
~
safe temperature.
Be aware of loose fitting or hanging
~
clothing while using the warming
This is particularly important when
preparing food for babies and children.
drawer. They may present a fire hazard.
Never warm undiluted alcohol in the
~
warming drawer, this can easily ignite.
The floor of the drawer becomes hot
~
during use. Caution, do not touch. Use
the handle for opening and closing the
appliance.
Exercise caution when warming
~
food with a high sugar content. If
heated for too long the sugar may
caramelize or ignite.
Do not store anything in the warming
~
drawer. Forgotten items could melt or
catch fire when the appliance is turned
on. Flammable liquids and materials
should never be stored in or above the
warming drawer.
Be sure that the vents are not
~
covered. Food and tableware may not
warm evenly otherwise.
Do not leave the warming drawer
~
unattended while in use.
Food warmed for a long period of
~
time will dry out and could ignite. Make
sure food is not forgotten in the
warming drawer.
Do not use water on grease fires!
~
A violent steam explosion may result.
Smother the fire with a dry chemical or
foam fire extinguisher.
It is possible that some bacterial
~
growth may occur in foods kept for
lengthy period of time at low
temperature levels.
Never add water to food in a hot
~
drawer. The steam created could cause
serious burns or scalds.
Do not warm fabrics in the drawer!
~
Do not use the plate warmer to heat
~
Open and close the drawer carefully the room. Due to the high temperatures
~
so that items are not spilled. This will
also allow hot air or steam to escape.
radiated, objects left near the appliance
could be damaged.
Do not replace the non-slip mat, e.g.
~
with a kitchen towel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories not
~
recommended by Miele may cause
injury.
Make certain that the power cords of
~
small appliances do not come in
contact with the appliance. The
insulation of the cable could become
damaged. Danger of electric shock!
Do not lean, sit or overload the
~
warming drawer. This will cause
damage. The drawer can hold a
maximum of 55 lbs (25 kg).
Do not use plastic containers,
~
plastic wrap or aluminum foil in the
warming drawer. These items may melt
and cause damage to the warming
drawer or injury.
Do not use a steam cleaner to clean
~
the drawer. Steam could penetrate
electrical components and cause a
short circuit.
SAVE THESE INSTRUCTIONS
AND REVIEW THEM
PERIODICALLY
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the warming drawer
ESW 4082-14 / ESW 4088-14
aControl panel
bNon-slip mat
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the warming drawer
ESW 47x2 / ESW 48x2
aControl panel
bNon-slip mat
cVent
dRack
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the warming drawer
Control panel
On/Off
Temp.
Press and hold this touch control to turn
the warming drawer On and Off
Allows you to select the desired
temperature.
Menu
The display shows:
Allows you to select the operating
mode
] ^ ^ ^ ^
See "Temperature settings" for more
information.
Operating modes:
/
Cups/glasses
Timer
H
2
Tableware
Allows you to set the heating time.
Food - warm and hold
The display shows:
1h = 1 hour
2h = 2 hours
3h = 3 hours
4h = 4 hours
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before the first use
When first connecting the appliance to
the power supply and after a power
failure, the fan will run and a display
test will be carried out for
Heat the appliance
Heat the warming drawer for a
minimum of 2 hours.
approx. 10 seconds. The appliance
cannot be used during this time.
^ Turn on with the "On/Off" touch
control
^ Tap the "Menu" touch control until the
Clean the appliance
2 symbol lights.
^ Remove any protective wrapping.
^ Tap the "Temp." touch control until
the 5th indicator lights.
^ Remove the non-slip mat and clean
with a solution of warm water and
liquid dish soap. Dry with a soft cloth.
^ Tap the "Timer" touch control until 2h
lights up.
^ Clean the warming drawer, inside
and out, with a damp cloth and wipe
dry.
^ Close the drawer.
The warming drawer is fitted with a
self-closing device.
^ Replace the non/slip mat once has
completely dried.
The drawer is also fitted with a
contact switch which will only allow
the heating and fan to work if the
drawer is closed.
^ Vent the room when heating the
drawer for the first time.
Metal components have a protective
coating which may give off a slight odor
the first time your new appliance is
heated. The smell will dissipate after a
short time and does not indicate a
faulty connection.
^ The warming drawer will turn off
automatically after 2 hours.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the warming drawer
Operating modes
Tap the "Menu" touch control until the
desired operating mode lights:
– /
Cups/Glasses
– H Tableware
– 2 Food - warm and hold
The last operating mode selected
appears in the control panel when the
drawer is turned on.
The warming drawer is equipped with a
fan which distributes warm air
throughout the drawer. During the
operating modes "Cups/Glasses" and
"Tableware" the fan runs continuously.
During "Food - warm and hold" it runs in
intervals.
You can warm meals and tableware at
the same time. In this instance use the
operating mode "Food - warm and
hold".
Use caution : The tableware may be
hot.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the warming drawer
Temperature settings
Each operating mode has an assigned temperature range.
The suggested temperatures are set by default, they are
marked in bold in the table below. Use the "Temp." touch
control to change the setting in increments.
The last selected temperature is shown in the control panel
the next time the warming drawer is turned on.
Temperature
Display
Temperature °F (C°) *
/
H
s
] ^ ^ ^ ^
^ ] ^ ^ ^
^ ^ ] ^ ^
^ ^ ^ ] ^
^ ^ ^ ^ ]
104 (40)
113 (45)
122 (50)
131 (55)
140 (60)
140 (60)
149 (65)
158 (70)
167 (75)
176 (80)
149 (65)
158 (70)
167 (75)
176 (80)
185 (85)
*
The temperatures are approximate.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the warming drawer
Duration
Operation
The warming drawer is set for
^ Open the drawer.
continuous operation by default. By
selecting the "Timer" touch control a
warming time can be set. With each tap
^ Press and hold "On/Off" touch control
until the unit turns on.
of the "Timer" touch control the duration ^ Select "Menu" until the desired
will increase in one hour increments,
beginning with 1 hour and ending with
4 hours. Selecting "Timer" one more
time (equaling 5 taps) will set
operating mode lights up.
^ If desired select a new temperature.
Select "Temp." until the temperature
is reached.
continuous operating mode.
The warming drawer is in continuous
operating mode.
Do not leave the warming drawer in
continuous operation mode for an
extended period of time. Long
heating times will dry out the food
possibly causing it to ignite.
^ To set a warming time, select "Timer"
until the desired number of hours is
set.
^ Close the drawer.
The warming drawer is equipped
with a safety cut-out feature which
turns the warming drawer off after
12 hours of continuous operation
(except during Sabbath mode).
Once the desired pre-heating time has
elapsed, load the drawer. If tableware
was loaded during the pre-heating time
use pot holders to unload.
Open and close the drawer carefully
so that items are not spilled.
Turn the appliance off before
unloading.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the warming drawer
Sabbath Mode
Activate
For religious observance, the appliance ^ Press and hold "Timer".
can be set for the duration of the
^ At the same time press and hold
Sabbath. In Sabbath mode the timer is
deactivated and the sensors have to be
touched longer than ususal. If Sabbath
mode is activated, the appliance will
turn off after approx. 72 hours, then
automatically reset to normal operation.
"On/Off".
^ Hold both buttons until all 4 timer
indicators light up at once.
^ If desired, set the operating mode
and temperature.
Deactivate
^ Press and hold "On/Off" until all
indicators go out.
The appliance is reset for normal
operation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the warming drawer
The drawer load will depend on the type and size of your
dishes.
The maximum load is 55 lbs (25 kg).
Do not overload the drawer.
To increase the load space use the supplied rack.
Two racks will fit in the drawer at one time. Additional racks
are available from Miele.
ESW4082-14 / ESW 4088-14
ESW 47x2 / ESW 48x2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Keeping food warm
Tips
The warming drawer is intended for
keeping food warm directly after
preparation. It is not intended to
re-warm cold meals.
– To ensure that the minimum
temperature of 150°F (65°C) required
to keep food warm is met, select 2.
– Preheat the warming drawer for
approx. 15 minutes to guarantee that
the interior has risen to the desired
temperature.
– Place food into preheated tableware
before placing into the warming
drawer. Tip: Put tableware into the
warming drawer while it is
preheating.
– Do not cover foods which you would
like to keep crisp.
– Cover foods with a high moisture
content to avoid a "skin" from
forming.
– To avoid spillages do not over fill
tableware.
– Do not warm food for too long. Food
may be overcooked.
– Allow extra time for the temperature
to adjust after adding or checking on
food or dishes.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Keeping food warm
Settings
Food
Type of
Lid on
Temperature for
Position in
drawer
container
container
2 setting
Floor Rack*
Bacon
Plate
Pan
no
^ ^ ] ^ ^
] ^ ^ ^ ^
x
x
x
x
Beef**
yes
Rare / Medium / Well
Bread hard rolls
Bread soft rolls
Plate
Plate
no
yes
no
^ ^ ^ ^ ]
^ ^ ^ ^ ]
^ ^ ] ^ ^
x
x
x
x
x
Casserole, crisp top
Plate /
Casserole dish
Casserole, moist
Eggs, hard boiled
Scrambled eggs
Fish / Seafood
Fruit
Pot / Dish
Plate
yes
no
^ ^ ^ ^ ]
^ ] ^ ^ ^
^ ^ ] ^ ^
^ ^ ] ^ ^
^ ^ ] ^ ^
^ ^ ] ^ ^
^ ^ ] ^ ^
] ^ ^ ^ ^
^ ^ ] ^ ^
^ ^ ^ ^ ]
^ ^ ] ^ ^
^ ^ ] ^ ^
^ ^ ^ ^ ]
^ ^ ] ^ ^
^ ^ ] ^ ^
^ ^ ] ^ ^
^ ^ ] ^ ^
^ ^ ^ ^ ]
^ ^ ^ ^ ]
^ ^ ] ^ ^
^ ^ ^ ^ ]
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Pan / Plate
Plate
yes
yes
yes
yes
yes
no
Dish
Gravy, cream sauces
Ham
Pot
x
Plate
Lamb
Plate
x
x
x
x
Oatmeal**
Pot
no
Pancakes
Plate
yes
no
Pies - Single Crust
Pies - Double Crust
Pizza
Baking Dish
Baking Dish
Plate / Pizza pan
Pan
no
no
Fillet of Pork (whole)
Fillet of Pork (slices)
Potatoes - baked
Potatoes - mashed**
Poultry
yes
yes
yes
yes
no
x
x
x
Pan
Dish / Pot
Pot
Pan / Plate
Pot
x
x
Rice
yes
no
Vegetables
Dish
Fish sticks**
Pan / Plate
no
*
depending on model
** maximum recommended warming time is 30 minutes
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Warming tableware
Tips
Warming times
– Distribute tableware throughout the
entire drawer. Stacked plated will
heat up more slowly than individual
pieces. If stacking is unavoidable
please them in the front of the
drawer. Use the rack (depending on
model).
Various factors will affect the warming
times of tableware:
– type and thickness of the dishes,
– quantity,
– how the dishes are arranged, and
– the temperature setting.
– Do not place platters right up against
the vents. They may cover the warm
air outlets, causing the tableware to
not heat evenly.
As you use the drawer you will learn
which settings suit your needs best.
The following can be used as a
guideline:
– For cups and glasses select on the /
function, this will ensure that the
max. temperature of 140°F (60°C) is
not exceeded.
When using the H setting, it will take
approx.
– 30 - 35 minutes for 6 place settings
to heat evenly.
– Heated tableware cools very quickly.
Remove it from the drawer right
before you need it.
– 40 - 45 minutes for 12 place settings
to heat up evenly.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Other usages
The warming drawer can also be used
to proof yeast dough or to warm or
crisp bread.
Proofing dough
Warming/Crisping bread
^ Open the drawer.
^ Open the drawer.
^ Turn the appliance on "On/Off".
^ Turn the appliance on "On/Off".
^ Touch "Menu" to select the " /
^ Touch "Menu" to select the " 2 Food
Cups/Glasses" setting.
- warm and hold" setting.
^ Touch "Temp." to select the
^ Touch "Temp." to select the
] ^ ^ ^ ^ temperature setting.
^ ^ ^ ^ ] temperature setting.
^ Put the dough in a bowl and cover
^ Put the bread on a plate and place in
on the floor or rack of the warming
drawer.
with a plate.
^ Place bowl on either the floor or rack
of the warming drawer.
^ Allow bread to crisp for approx. 30
minutes.
^ Allow dough to proof for approx. 30
minutes or until it has doubled in size.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Allow the appliance to cool before
cleaning.
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Do not use a steam cleaner to clean
this appliance. Pressurized steam
could penetrate electrical
components and cause a short
circuit.
To better maintain your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
Do not use commercial cleaning
agents. Only use agents
– cleaners containing descaling
agents or lime removers,
recommended for domestic use.
Appliance front / interior
– abrasive cleaners,
– stainless steel cleaners,
– dishwasher soap (powder),
– caustic (oven) cleaners,
Remove spills as soon as possible.
Otherwise the soiling may become
hard to remove.
If spills are allowed to sit for an
extended period of time or if
unsuitable cleaning agents are used
the surfaces may discolor or
change.
– scouring pads, steel wool, hard
brushes,
– metal scrapers.
Non-slip mat
^ Clean the appliance with a solution of
warm water and liquid soap applied
with a soft sponge. Dry with a soft
cloth.
The mat can be removed to clean the
bottom of the drawer.
^ Clean the mat by hand with warm
water and liquid dish soap.
All surfaces of the appliance are
susceptible to scratching.
Breakages can occur on glass
surfaces.
^ Dry thoroughly. Do not return the mat
until it is completely dry.
Never clean in the washing
machine.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
,Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
What if the drawer does not heat?
Possible fault
Solution
There is no power to the warming
drawer.
Insert the plug into the outlet.
The circuit breaker has tripped.
Reset the circuit breaker. If in doubt
contact an electrician.
What if the food is not warm enough?
Adjust the temperature setting. Check that the vents have not been blocked by
large plates or dishes.
What if the food or dishes are too hot?
Check the temperature setting and make sure the food is not too close to the
heating element.
What if the dishes are not warm enough?
Possible fault
Solution
The wrong temperature was selected.
The vents were blocked by dishes.
The dishes need more time to warm.
A noise is heard during use.
Check the temperature setting.
Reload the dishes.
See "Warming times".
This is not a fault. This is the circulation fan which distributes the heated air. The
fan works in intervals during the "2 Food - warm and hold" mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Service
In the event of a fault which you cannot MieleCare
easily fix yourself, please contact the
(USA only)
Miele Technical Service Department at
the address on the back of this booklet. MieleCare, our Extended Service
Contract program; gives you the
When contacting Technical Service
assurance of knowing that your
please quote the serial number and
appliance investment is covered by 5
model of the appliance. This
years of worry free ownership.
information is visible on the silver data
MieleCare is the only Extended Service
plate supplied with the appliance.
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by the Miele
Service department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
IMPORTANT: SAVE FOR THE LOCAL
ELECTRICAL INSPECTOR'S USE
Information is subject to change.
Please refer to our website to obtain
the most current product
specification, technical & warranty
information.
To prevent accidents
and machine damage
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Before installation make sure that
~
the voltage and frequency listed on the
ESW 4082-14 / ESW 4088-14
Only install the warming drawer in
~
data plate correspond with the
combination with built-in appliances
recommended by the manufacturer.
When installed with other appliances,
the warranty is void since the
household electrical supply. This data
must correspond in order to avoid risk
of damage to the appliance. If in doubt,
consult a qualified technician.
manufacturer cannot guarantee the
The electrical outlet should be easily safe use of the plate warmer.
~
accessible after installing the unit.
To install the warming drawer in
~
combination with another appliance, a
Be sure that after installation the
~
power cord does not come into contact built-in shelf must exist in the cabinet to
with any hot surfaces.
support the weight of both appliances.
The food warming drawer must be
When installed in combination with
~
~
installed so the contents of the drawer
can be seen. Otherwise spills could
cause burns or scalding.
another appliance, the warming drawer
must always be installed beneath the
other appliance. The combination
appliance can be set without a base
directly onto the plate warmer. A shelf
between the appliances is not
necessary.
Be sure there is enough space for the
drawer to be pulled out completely.
This appliance is not designed for
~
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
The building in dimensions of the
~
warming drawer must be added to the
certain conditions it may be possible for building in dimensions of the
an installation in these applications.
Please contact the Miele Technical
Service Department with specific
requirements.
combination appliance to determine the
niche size required.
Note to the installer:
Please leave these instructions with the
consumer of the appliance for the local
building inspectors use.
SAVE THESE
INSTRUCTIONS
24
Download from Www.Somanuals.com. All Manuals Search And Download.
ESW 4082-14 / ESW 4088-14
Miele appliances can be installed flush or proud. Discuss your installation
requirements with your architect, designer and installer.
Combination possibilities
Installation with an oven
Installation with a speed oven
aCut-out for venting the oven
* Machine with glass front
** Machine with stainless steel front
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ESW 4082-14 / ESW 4088-14
Installation with a steam oven
Installation with a coffee machine
* Machine with glass front
* Machine with glass front
** Machine with stainless steel front
** Machine with stainless steel front
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ESW 47x2
Solo installation
Side view
aA base is required for solo
installations
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ESW 47x2
Installation with an oven
Side view with oven
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ESW 48x2
Solo installation
Side view
aA base is required for solo
installations
29
Download from Www.Somanuals.com. All Manuals Search And Download.
ESW 48x2
Installation with an oven
Side view with oven
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Miele appliances can be installed flush or proud. Discuss
your installation requirements with your architect, designer
and installer.
Check that the base of the warming drawer is clean and
level. Only then will it function properly.
When inserting the appliance, wear work gloves to avoid
injuries.
^ Push the appliance into the cabinetry, and align.
^ Open the drawer and fix the appliance with the supplied
screws at the side panels of the cabinet (see appropriate
illustration).
^ ESW 4082-14 / ESW 4088-14
Install the combination appliance regarding the manual
supplied with that machine.
ESW 4082-14 / ESW 4088-14
ESW 47x2 / ESW 48x2
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Aligning the appliance front
After installation it may be necessary to align the appliance
front and/or the gap between the appliances/furniture front
above.
^ Remove the screws a from the left and right sides of the
drawer front.
^ Carefully lift the control panel out of the drawer. Be careful
not to pull or damage the power cord.
ESW 4082-14 / ESW 4088-14
ESW 47x2 / ESW 48x2
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
^ Loosen the 2 screws b on the inside of the drawer front.
^ Align the front.
^ Tighten the screws on the inside of the drawer front.
^ Replace the control panel, use caution with the power cord.
^ Replace the screws on the left and right sides of the drawer
front.
ESW 4082-14 / ESW 4088-14
ESW 47x2 / ESW 48x2
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Integrated installations
Custom made front panels can be installed with models
ESW 4702 FB and ESW 4802 FB.
The custom panel must be at least 3/4" (19 mm) thick and
made of heat resistant material 140 °F (60 °C). The front
panel, including handle, must not exceed 11 lb (5 kg) in
weight.
^ Install a handle to the custom front panel using
countersunk screws.
^ Remove the screws from the left and right sides of the
drawer front and carefully lift the control panel out of the
drawer (see chapter "Aligning the appliance front")> Be
careful not to pull or damage the power cord.
^ Remove the two screws on the inner side of the drawer and
remove the panel from the appliance front.
^ Pre-drill the custom front panel (see illustration).
C 3/8" (10 mm), t = 3/8" (10 mm)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
^ Remove the cable tie from the panel.
^ Screw the removed panel to the custom panel (see
illustration).
^ Hook the panel into the bottom. Make sure the seal is
seated correctly.
^ Replace and slightly tighten the screws on the inside of the
drawer front.
^ Align the front.
^ Tighten the screws on the inside of the drawer front.
^ Replace the control panel, use caution with the power cord.
^ Replace and tighten the screws on to the left and right side
of the drawer front.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Power supply
,CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
This appliance is equipped with a 5 ft
(1.5 m) long power cord with a
three-prong grounding plug ready for
connection to a 120 V, 15 A, 60 Hz
power supply.
"tripping" the circuit breaker.
Further installation details are on the
wiring diagram.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
When another appliance is installed
in combination with the warming
drawer to the same circuit, operating
both appliances at the same time
may cause an overload. If in doubt
consult a qualified electrician.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Help protect our environment
Disposal of packing materials
Disposal of an old appliance
The cardboard box and packing
materials are biodegradable and
recyclable. Please recycle.
Old appliances contain materials that
can be recycled. Please contact your
local recycling authority about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Before discarding an old appliance
disconnect it from the electrical supply
and cut off the power cord to prevent it
from becoming a hazard.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 0410
M.-Nr. 07 342 380 / 06
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|