Installation and Assembly:
Optoma Universal Projector Mount By Peerless
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
Model: BM-5001U
R
Max Load Capacity: 50 lb (22.6 kg)
A
Parts List
Description
Qty. Part #
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
main plate
extension bracket
1
4
1
2
1
1
2
2
2
1
8
6
4
8
4
4
4
4
1
055-1939
055-1940
055-KPRGU-B-3
520-1151
520-1196
560-9646
540-1078
5S1-015-C03
590-0097
560-1097
540-1049
540-1032
540-9413
540-1001
510-1003
510-1087
510-1005
520-1132
580-1065
precision gear projector mount
10-32 x 3/8" socket pin serrated washer head screw
10-32 x 1/4" socket pin with lock patch
4 mm security allen wrench
6.5 ID x 17.8 OD x 1.6 mm flat washer
#14 x 2.5 hex phillips wood screw
alligator anchor
B
2 mm security allen wrench
#4 flat washer
.219 ID x .5 OD x .125 spacer
.219 ID x .5 OD x .25 spacer
#8 flat washer
M3 x 12 mm socket pin serrated washer head screw
M4 x 16 mm socket pin serrated washer head screw
M4 x 8 mm socket pin serrated washer head screw
M6 x 16 mm socket pin screw
C
AA
AA connection block
D
E
F
G
H
I
J
L
K
O
P
Q
R
M
N
NOTE: The following pages show the attachment points and hardware required to attach main plate
to projectors.
NOTE: Before installation review the directory on page 2 to find projector configuration.
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation To Wood Joist Ceilings
WARNING
• Installer must verify that the supporting surface will safely support the combined load of the equipment and all
attached hardware and components.
• Tighten wood screws so that projector mount assembly is firmly attached, but do not overtighten. Overtightening
can damage the screws, greatly reducing their holding power.
• Never tighten in excess of 80 in. • lb (9 N.M.).
• Make sure that mounting screws are anchored into the center of the stud. The use of an “edge to edge” stud finder
is highly recommended.
• Hardware provided is for attachment of mount through standard thickness drywall or plaster into wood studs. Install-
ers are responsible to provide hardware for other types of mounting situations.
Place projector mount assembly (C) on ceiling as a template and mark the center of the two mounting holes. Make
sure that the mounting holes are in the center of the wood joist. Drill two 5/32” (4 mm) dia. holes to a minimum
depth of 2.5” (64 mm). Attach projector mount assembly (C) with two #14 x 2.5” (6 mm x 65 mm) wood screws (H)
2
and two 1/4” flat washers (G) as shown in figure 2.1 or figure 2.2 depending on joist orientation.
Note: Mounting slots on projector mount assembly (C) allow for 30° (±15°) of swivel adjustment before fully
securing wood screws.
Tighten wood screws (H) using 3/8” (10 mm) socket wrench, phillips screwdriver or 10 mm open end wrench until
projector mount assembly (C) is firmly attached.
WOOD JOIST
WOOD JOIST
FRONT OF
MOUNT
C
C
ARROW ON TOP OF PRO-
JECTOR MOUNT ASSEM-
BLY INDICATES FRONT
OF MOUNT
G
H
G
H
fig. 2.2
fig. 2.1
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
3 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: When attaching extension brackets (B) be sure to keep fasteners in the center of the slot.
POSITION SCREW,
SPACER AND WASHER
IN CENTER OF SLOT
B
CORRECT
INCORRECT
Note: Refer to to the Projector Mount Directory for projector mounting pattern and fasteners.
CONFIGURATION A
1
Attach plate (A) to projector using three
M3 x 12 mm socket pin serrated washer head
screws (O), #4 flat washers (K) and spacers (L).
Attach connection block (AA) to plate (A) using
two #10-32 x 3/8” serrated socket pin screws (D)
(used in PRG) and .219 ID x .5 OD x .125 spac-
ers (L).
2
SHOULDER
AA
O
K
L
A
FRONT OF
PROJECTOR
D
L
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
4 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION B
Attach connection block (AA) to plate (A) using
Attach plate (A) to projector using four
M3 x 12 mm socket pin serrated washer head
screws (O), #4 flat washers (K) and spacers (L).
1
2
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
spacers (L).
AA
O
K
SHOULDER
L
A
FRONT OF
PROJECTOR
L
D
CONFIGURATION C
Attach plate (A) to projector using three
M3 x 12 mm socket pin serrated washer head
screws (O), #4 flat washers (K) and spacers (L).
Attach connection block (AA) to plate (A) using
1
2
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
spacers (L).
O
K
SHOULDER
AA
L
A
C
FRONT OF
PROJECTOR
L
D
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
5 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION D
Attach plate (A) to projector using three
M4 x 16 mm socket pin serrated washer head
screws (P), and spacer (M).
Attach connection block (AA) to plate (A) using
1
2
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
spacers (L).
SHOULDER
P
AA
L
A
FRONT OF
PROJECTOR
M
D
CONFIGURATION E
Attach three extension brackets (B) to plate
(A) using three M4 x 8 mm serrated socket pin
screws (Q). Attach extension brackets (B) to
projector using three .125” spacers (L), #4 flat
washers (K), and three M3 x 12 mm socket pin
serrated washer head screws (O).
Attach connection block (AA) to plate (A) using
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
2
1
spacers (L).
SHOULDER
AA
Q
O
L
A
K
FRONT OF
PROJECTOR
L
B
D
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
6 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION F
Attach connection block (AA) to plate (A) using
Attach two extension brackets (B) to plate
(A) using two M4 x 8 mm serrated socket pin
screws (Q). Attach plate (A) to projector using
one .25” spacer (M), and one M3 x 12 mm
screw (O). Attach extension brackets (B) to
projector using two M3 x 12 mm screws (O),
flat washers (K), and .125” spacers (L).
1
2
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
spacers (L).
SHOULDER
AA
O
Q
O
L
A
K
FRONT OF
PROJECTOR
L
M
B
D
CONFIGURATION G
Attach three extension brackets (B) to plate
(A) using three M4 x 8 mm serrated socket pin
screws (Q). Attach extension brackets (B) to
projector using three .125” spacers (L), #4 flat
washers (K), and three M3 x 12 mm socket pin
serrated washer head screws (O).
Attach connection block (AA) to plate (A) using
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
1
2
spacers (L).
SHOULDER
AA
Q
O
L
A
K
FRONT OF
PROJECTOR
L
B
D
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
7 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION H
Attach connection block (AA) to plate (A) using
Attach four extension brackets (B) to plate
(A) using four M4 x 8 mm serrated socket pin
screws (Q). Attach extension brackets (B) to
projector using four .125” spacers (L), #4 flat
washers (K), and four M3 x 12 mm socket pin
serrated washer head screws (O).
1
2
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
spacers (L).
SHOULDER
AA
L
A
Q
O
K
FRONT OF
PROJECTOR
B
D
L
CONFIGURATION I
1
Attach connection block (AA) to plate (A)
using two #10-32 x 3/8” serrated socket pin
screws (D) and .219 ID x .5 OD x .125 spac-
ers (L).
Attach four extension brackets (B) to plate
(A) using four M4 x 8 mm serrated socket pin
screws (Q). Attach extension brackets (B) to
projector using four .125” spacers (L), and four
M6 x 16 mm socket pin serrated washer head
screws (R).
2
SHOULDER
AA
Q
L
A
R
B
FRONT OF
PROJECTOR
L
D
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
8 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION J
Attach connection block (AA) to plate (A)
Attach one extension bracket (B) to plate (A)
using one M4 x 8 mm serrated socket pin
screw (Q). Attach plate (A) to projector using
two .125” spacers (L), one #4 flat washer (K),
one #8 flat washer (N) and two M3 x 12 mm
screws (O). Attach extension bracket (B) to
projector using one M3 x 12 mm screw (O),
flat washers (K), and .125” spacers (L).
1
2
using two #10-32 x 3/8” serrated socket
pin screws (D) and .219 ID x .5 OD x .125
spacers (L).
SHOULDER
AA
O
K
Q
L
A
O
N
O
K
FRONT OF
PROJECTOR
L
B
L
D
L
B
Q
FRONT OF PROJECTOR
TOP VIEW
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
For customer care call 1-800-865-2112 or 708-865-8870.
9 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION K
Attach connection block (AA) to plate (A) using
Attach two extension brackets (B) to plate
(A) using two M4 x 8 mm serrated socket pin
screws (Q). Attach plate (A) to projector using
one .25” spacer (M), and one M4 x 16 mm
screw (P). Attach extension brackets (B) to
projector using two M4 x 16 mm screws (P),
flat washers (K), and .125” spacers (L).
1
2
two #10-32 x 3/8” serrated socket pin screws (D)
and .219 ID x .5 OD x .125
spacers (L).
SHOULDER
AA
P
Q
P
L
A
K
FRONT OF
PROJECTOR
L
M
B
D
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
10 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching Adapter Plate to Projector Mount
WARNING
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the screen.
Slide connection block (AA) with precision gear projector mount (C) as shown. Tighten captive screw to secure
precision gear projector mount (C).
3
ARROW
INDICATES
FRONT OF
MOUNT
FRONT OF MOUNT
C
AA
CAPTIVE SCREW
IMPORTANT: For security installations, insert one #10-32 x 1/4" socket pin screw (E) through precision gear pro-
jector mount (C) and into connection block (AA) as shown. Tighten screw using 4mm security allen wrench (F).
4
C
AA
E
ISSUED: 04-20-09 SHEET #: 056-9019-7 09-07-10
11 of 11
For customer care call 1-800-865-2112 or 708-865-8870.
Download from Www.Somanuals.com. All Manuals Search And Download.
|