13-1279.fm Page 1 Wednesday, July 14, 1999 4:50 PM
Cat. No. 13-1279
OWNER’S MANUAL
Please read before using this equipment.
SYSTEM 734
Mini Stereo Component System
with 3-Disc Automatic CD Changer
AM/FM Stereo
3 Preset Equalizer Controls
15-Watts Per Channel Amplifier
Dual Hi-Speed Dubbing Cassette Deck
2-Way Speaker System
Electronic Volume Control
Clock
On/Off Timer
and Remote Control
R
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 3 Wednesday, July 14, 1999 4:50 PM
Soft Cassette Tape Eject — slowly
opens the cassette compartment door
when you press the eject button, so the
tape does not pop out.
Auxiliary Input Jacks — let you con-
nect an additional audio source, such
as a TV, VCR, turntable, or an external
CD changer or cassette deck, to your
system.
OTHER SPECIAL FEATURES
Note: The remote control requires two
Digital Synthesized Tuning — elimi-
nates tuning drift by locking the tuner
on the selected frequency.
AA batteries (not supplied) for power.
Warning: This CD changer employs a
laser light beam. Only a qualified ser-
vice person should remove the cover
or attempt to service this device, due to
possible eye injury.
Memory Tuning — lets you store and
easily recall up to 32 of your favorite
radio stations (8 AM and 24 FM).
Remote Control — lets you control
most of the System 734’s functions
from a distance.
Warning: To prevent fire or shock haz-
ard, do not expose this product to rain
or moisture.
Easy-to-Read Display — clearly dis-
plays your system’s indicators for easy
viewing in almost any lighting condi-
tion.
CAUTION
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
Extended Bass (E-BASS) — lets you
emphasize the low-bass sounds dur-
ing low-volume listening.
Three Preset Equalizer Settings —
provide you with common sound set-
tings for enhancing rock, pop, or clas-
sical music at the press of a button.
This symbol is intended to alert you
to the presence of uninsulated dan-
gerous voltage within the product’s
enclosure that might be of sufficient
magnitude to constitute a risk of
electric shock. Do not open the
product’s case.
Digital Clock — gives you a digital
time display even when the System
734 is turned off.
This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompany-
ing this product.
!
On/Off Timer — lets you set the Sys-
tem 734 to automatically turn itself on
and off at preset times.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 4 Wednesday, July 14, 1999 4:50 PM
Read this manual carefully. It will help
you get the most enjoyment from your
System 734.
Note: Most material on compact discs
and prerecorded tapes is copyrighted.
Unauthorized duplication of copyright-
ed material is a violation of the copy-
right laws of most countries and such
duplication may result in fines and/or
imprisonment. Note, however, that in
the United States, it is not a violation of
U.S. copyright laws for a consumer to
use an audio recording device to dupli-
cate musical recordings for noncom-
mercial (personal) use.
For your records, we urge you to
record the serial number of your Sys-
tem 734 in the space below. The serial
number is located on the back of the
system.
Serial Number __________________
Note: CDs that can be played on this
changer have this mark on them:
4
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 5 Wednesday, July 14, 1999 4:50 PM
TABLE OF CONTENTS
Preparation ........................................................................................................... 7
Connecting the Speakers ................................................................................ 7
Connecting the Antennas ................................................................................ 7
Connecting an Additional Audio Source ......................................................... 7
Connecting Power ........................................................................................... 8
Setting the Current Time ................................................................................. 8
Installing Batteries in the Remote Control ....................................................... 9
Connecting Headphones .............................................................................. 10
Listening Safely ...................................................................................... 10
Basic Operation ................................................................................................. 11
Using the Remote Control ............................................................................. 11
Turning On/Off the System ........................................................................... 11
Setting the Sound ......................................................................................... 11
Adjusting the Volume .............................................................................. 11
Using Extended Bass (E-Bass) .............................................................. 12
Changing the Preset Equalizer Settings ................................................. 12
Setting The On/Off Timer .............................................................................. 13
Radio Operation ................................................................................................. 15
Listening to the Radio ................................................................................... 15
Using Memory Tuning ................................................................................... 16
Storing a Station in Memory ................................................................... 16
Recalling a Stored Station ...................................................................... 17
CD Changer Operation ...................................................................................... 18
Loading and Playing a CD ............................................................................ 18
Loading/Unloading CDs during Play ....................................................... 20
Special CD Changer Features ...................................................................... 20
Automatic Search Music System (ASMS) .............................................. 20
Audible Search ....................................................................................... 21
Random Play .......................................................................................... 21
INTRO Scanning .................................................................................... 22
Repeat Play ............................................................................................ 22
Cue ......................................................................................................... 23
Programmed Play ......................................................................................... 23
Storing/Playing a Programmed Sequence ............................................. 23
Reviewing a Programmed Sequence ..................................................... 25
Erasing a Programmed Sequence ......................................................... 25
CD and CD Changer Care Tips .................................................................... 26
5
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 6 Wednesday, July 14, 1999 4:50 PM
Cassette Deck Operation .................................................................................. 27
Loading a Tape .............................................................................................. 27
Playing a Tape ............................................................................................... 27
Consecutive Play .................................................................................... 28
Recording a Cassette Tape ........................................................................... 29
Recording from a CD .............................................................................. 29
Copying Cassette Tapes ......................................................................... 30
Recording from the Radio ....................................................................... 31
Tape Tips ....................................................................................................... 32
Erasing a Cassette Tape ......................................................................... 32
Preventing Accidental Erasure ................................................................ 32
Restoring Tape Tension and Sound Quality ............................................ 33
Using an Additional Audio Source ................................................................... 34
Listening to an Additional Audio Source ........................................................ 34
Recording from an Additional Audio Source .................................................. 34
Troubleshooting ................................................................................................. 36
Care and Maintenance ....................................................................................... 37
The FCC Wants You to Know ........................................................................ 38
Cleaning the Tape-Handling Parts ................................................................. 38
Specifications ..................................................................................................... 39
6
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 7 Wednesday, July 14, 1999 4:50 PM
PREPARATION
Important:
CONNECTING THE
ANTENNAS
• Complete all connections to the
System 734 before you connect it
to power.
To connect the supplied AM and FM
antennas, press open the pair of termi-
nal tabs marked AM or FM (75W), then
insert the stripped end of the AM or FM
antenna’s wires into the terminals. Re-
lease the tabs to close them.
• Be sure to follow all of the installa-
tion instructions described in the
enclosed “Safety Instructions.”
CONNECTING THE
SPEAKERS
1. Press open the pair of terminal
tabs marked SPEAKERS/ + R – on
the back of the main System 734,
then insert the right speaker’s
striped wire into the red (+) termi-
nal and its solid wire into the black
(–) terminal. Then release the
tabs.
CONNECTING AN
ADDITIONAL AUDIO
SOURCE
To connect an additional audio source
to your System 734, such as a TV,
VCR, CD changer or cassette deck,
plug the audio source’s left and right
line level audio wires into AUX L (left)
and R (right).
Caution: To avoid damaging your
system and speakers, never let
the speaker wire’s bare ends
touch each other.
2. Repeat Step 1 to connect the left
speaker’s wires to the terminal
tabs marked SPEAKERS/ – L +.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 8 Wednesday, July 14, 1999 4:50 PM
Notes:
SETTING THE CURRENT
TIME
• See “Using an Additional Audio
Source” to operate an external
audio source with the System 734.
CLOCK
1. Press and hold
for about 2
seconds. The hour digit(s) flash.
• If you connect a turntable to the
System 734, the turntable must
have a built-in equalizer amplifier.
CONNECTING POWER
To connect power after making all oth-
er connections, plug your system’s AC
cord into a standard AC outlet. The last
known time flashes on the display.
2. To increase or decrease the hour
setting, within 5 seconds press
TUNING UP
DOWN
PRESET/
, or
or
TUNING
s or t on the remote con-
trol.
Caution: Your system’s AC power
cord has a polarized plug (one blade is
wider than the other). If you have diffi-
culty inserting the plug into the outlet,
do not force it. Turn the plug over and
try again.
Notes:
• To rapidly increase or decrease
the hour setting, press and hold
TUNING UP
SET/TUNING
DOWN
PRE-
on the
or
s or
, or
t
remote control.
• When changing the hour, be
sure to set it to the correct AM
or PM hour, so AM or PM
appears on the display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 9 Wednesday, July 14, 1999 4:50 PM
• If the hour digit stops flashing
before you finish setting the
hour, start again from Step 1.
• The time appears constantly while
the System 734 is turned off. To
display the time at any time while
the system is turned on, simply
press CLOCK. The current time
briefly appears.
3. Press CLOCK. The minute digits
flash.
INSTALLING BATTERIES
IN THE REMOTE
CONTROL
The remote control requires two AA
batteries (not supplied) for power. For
the best performance and longest life,
we recommend alkaline batteries,
such as Radio Shack Cat. No. 23-552.
4. To increase or decrease the min-
utes setting, press TUNING DOWN
or UP, or PRESET/TUNING s or t on
the remote control.
Always use fresh batteries of
Caution:
Notes:
the required size and type.
• To rapidly increase or decrease
the minute setting, press and
hold TUNING UP or DOWN, or
PRESET/TUNING s or t on the
remote control.
1. To open the battery compartment
cover, press the tab on the cover
in the direction of the arrow, then
lift the cover away from the com-
partment.
• If the minute digits stop flashing
before you finish setting the
minutes, repeat Steps 1, 3, and
4.
5. Press CLOCK again to start the
clock.
Notes:
• When power is disconnected or
interrupted then restored, the last
known time flashes on the display.
If this happens, reset the time.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 10 Wednesday, July 14, 1999 4:50 PM
2. Insert the batteries into the com-
partment as indicated by the
polarity symbols (+ and –) marked
inside.
To connect headphones, plug the
headphone’s 1/4-inch plug into the
PHONES
jack on the front of the Sys-
tem 734.
3. Replace the cover.
Note: Connecting headphones auto-
matically disconnects the System
734’s speakers.
Notes:
• If you will not be using the remote
control for a month or more,
remove the batteries.
Listening Safely
• You can use the remote control up
to a distance of about 20 feet (6
meters), from an angle of up to
60° in front of the System 734. If it
does not operate properly within
this range, replace the batteries.
To protect your hearing, follow these
guidelines when you use headphones.
• Set the volume to the lowest set-
ting before you begin listening.
After you begin listening, adjust
the volume to a comfortable level.
Warning: Always dispose of old bat-
teries promptly and properly.
• Do not listen at extremely high
volume levels. Extended high-vol-
ume listening can lead to perma-
nent hearing loss.
CONNECTING
HEADPHONES
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
To listen without disturbing others, you
can connect a pair of 1/4-inch plug ste-
reo headphones (not supplied) to the
System 734. Your local Radio Shack
store sells a wide selection of stereo
headphones.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 11 Wednesday, July 14, 1999 4:50 PM
BASIC OPERATION
Important: To prevent hearing dam-
age, set the volume to its minimum lev-
el before turning on the system (see
“Setting the Sound”).
TURNING ON/OFF THE
SYSTEM
Press POWER to turn on the System
734. All of the system’s display charac-
ters appear from left to right, then the
last selected settings appear.
USING THE REMOTE
CONTROL
The remote control communicates with
your system through a remote sensor
located on the left of the system’s dis-
play. To use the remote control, be
sure that the front end of it is pointing
with a clear path toward the system’s
display, then press the desired but-
ton(s).
To turn off the system, press POWER
again. All of the system’s display char-
acters appear at once, then disappear
from right to left. Then the current time
appears and remains on the display.
SETTING THE SOUND
Adjusting the Volume
Note: Several controls on the main
unit and the remote control operate the
same system function. You can use ei-
ther control to operate the System 734.
To increase the system’s volume, turn
VOLUME towards UP, or press VOL-
UME s on the remote control. To de-
crease the volume, turn VOLUME
towards DOWN, or press VOLUME t on
the remote control.
Caution: Exposing the remote control
or the sensor on the main system to di-
rect sunlight or strong lights, such as a
spotlight, will reduce its operating dis-
tance and can make it inoperative.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 12 Wednesday, July 14, 1999 4:50 PM
Each time you increase or decrease
the volume, the current volume setting,
measured in decibels (dB), appears on
the display. You can adjust the volume
anywhere from –68 dB (low) to 0 dB
(high).
To return to normal bass sound, press
it again so the button clicks and pops
out.
Changing the Preset
Equalizer Settings
You can adjust the balance of the Sys-
tem 734’s sound frequencies using
one of its three preset equalizer (sound
balance) settings. These settings are
designed to give you the best sound
for rock, pop, or classical musical se-
lections.
Important: To prevent hearing dam-
age, set the volume to its minimum lev-
el before playing the radio, a CD or
cassette tape, or an external audio
source.
Note: To turn off the sound temporari-
MUTE
ly, press
. A red indicator ap-
Each time you turn it on, the System
734 automatically uses the last select-
ed equalizer setting. To change the
MUTE
pears next to
on the display. To
MUTE
resume listening, press
the indicator turns off.
again so
ROCK POP
, or
CLASSIC
setting, press
,
,
EQ PRESET
or repeatedly press
on the
remote control. The selected button
lights up, and appears next to
CLASSIC
ROCK POP
,
, or
on the dis-
play.
Using Extended Bass
(E-Bass)
To cancel the selected setting, press
To enhance the System 734’s bass
E-BASS
tem. The button clicks and locks in.
EQ PRE-
the selected button or press
sound, press
on the main sys-
SET
on the remote control until the se-
lected button turns off on the main
system.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 13 Wednesday, July 14, 1999 4:50 PM
2. To increase or decrease the on-
time hour setting, within 5 sec-
SETTING THE ON/OFF
TIMER
TUNING UP
PRESET/TUNING
DOWN
,
onds press
or
or
s or t on the
You can set the System 734 to auto-
matically turn itself on, play the last se-
lected radio station, CD, or cassette
tape, then turn itself off again.
remote control.
Notes:
• To rapidly increase the hour or
minutes settings when setting the
on/off times, simply press and
TIMER SET
3. Press
again. The
TUNING UP
DOWN
PRE-
, or
hold
or
minute digits flash.
SET/TUNING
s or t on the remote
control.
• When changing the hour setting,
be sure to set it to the correct AM
or PM hour.
• If the hour or minute digits stop
flashing before you finish setting
them, start again from Step 1.
4. To increase or decrease the on-
time minutes setting, within 5 sec-
TIMER SET
1. Press and hold
on the
TUNING UP
DOWN
,
onds press
or
remote control until ON and the
last set on-time appear on the dis-
play. The hour digits flash.
PRESET/TUNING
or
s or t on the
remote control.
TIMER SET
5. Press
again. OFFand
the last set off-time appear on the
display. The hour digit(s) flash.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 14 Wednesday, July 14, 1999 4:50 PM
6. To increase or decrease the off-
time hour setting, within 5 sec-
onds press TUNING UP or DOWN,
or PRESET/TUNING s or t on the
remote control.
11. Select the desired radio station or
CD you want the System 734 to
play when it turns itself on (see
“Radio
Operation”
or
“CD
Changer Operation”).
7. Press TIMER SET again. The
: If you selected a cassette
Note
minute digits flash.
tape, be sure to press PLAY and
PAUSE on the appropriate deck
(TAPE 1 or 2) (see “Cassette
Deck Operation”).
8. To increase or decrease the off-
time minutes setting, within 5 sec-
onds press TUNING UP or DOWN,
or PRESET/TUNING s or t on the
remote control.
12. Select the desired E-BASS and
equalizer settings.
9. Press TIMER SET again. The last
set volume level appears on the
display. Adjust VOLUME to set the
volume to the desired level.
13. Press POWER to turn off the Sys-
tem 734. The current time and the
clock symbol appear dimly lit on
the display.
10. Press TIMER SET again to end
programming and turn on the
timer. A clock symbol appears on
the display to indicate that the
timer is on.
Notes:
• If you selected a cassette tape,
be sure to release PAUSE on
the selected deck after you turn
off the system.
• Until you turn off the timer, the
System 734 automatically turns
itself on every day at the preset
time and plays the last selected
radio station, cassette tape, or
CD. If no CD is loaded in the
last selected CD position, the
system automatically selects
the next highest numbered CD.
: To turn the timer on or off at
Note
any time after setting it, press
TIMER ON/OFF on the remote con-
trol so the clock symbol appears
or disappears.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 15 Wednesday, July 14, 1999 4:50 PM
RADIO OPERATION
To rapidly scan for a station, press
and hold TUNING UP or DOWN, or
PRESET/TUNING s or t on the
remote control, until AUTO
appears on the display (about 2
seconds). When you release it,
the tuner automatically stops at
the next strong station.
LISTENING TO THE
RADIO
1. Repeatedly press FUNCTION until
appears next to TUNERon the
display.
2. Repeatedly press BAND to select
AM or FM. As you press it, AMor
FM and the last selected station
appear on the display.
Notes:
• If P- followed by a number
appears on the display, the sys-
tem tunes in only preset (mem-
ory) stations (see “Using
Memory Tuning”).
• To listen to FM broadcasts in
stereo, press FM MONO. If the
broadcast is being received in
stereo, STEREO appears on
the display.
3. Repeatedly press TUNING UP or
DOWN, or PRESET/TUNING s or t
on the remote control, to tune to
the desired station. As you press
it, the frequency number changes
on the display.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 16 Wednesday, July 14, 1999 4:50 PM
• To improve reception for weak
FM stereo stations, press FM
MONO. so MONO (monaural)
appears on the display. The
sound is no longer in stereo, but
reception should improve. To
return to stereo sound, press
FM MONO.
The first time you press
Note:
MEMORY after connecting power,
the System 734 automatically
selects memory position 01. Each
time you press it after that, it
selects the next available position.
To select the next higher or lower
memory position, after you press
MEMORY, press TUNING UP or
DOWN (or PRESET/TUNING s or t
on the remote control).
• For the best FM reception, fully
extend the FM antenna.
• For the best AM reception, turn
the AM antenna until reception
improves.
3. Within 5 seconds, press TUNING
UP or DOWN, or PRESET/TUNING
s or t on the remote control, to
tune to the desired station.
4. Adjust VOLUME, or VOLUME s/t on
the remote control, and select the
desired E-BASS and equalizer set-
tings.
USING MEMORY TUNING
You can store and easily recall up to
32 of your favorite AM and FM radio
stations (8 AM and 24 FM) in the Sys-
tem 734’s memory.
If MEMORY disappears
before you tune to the desired sta-
tion, repeat Step 2 then try again.
Note:
4. Press MEMORY again to store the
station in the selected memory
position.
Storing a Station in Memory
5. Repeat Steps 2-4 to store up to 24
FM stations or 8 AM stations in
the selected band.
1. Press BAND to select AM or FM.
2. Press MEMORY. MEMORYand P-
01(memory position 01) flash on
the display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 17 Wednesday, July 14, 1999 4:50 PM
Notes:
• You cannot clear a station from
memory, but you can store a new
one in its place.
• When power is disconnected or
interrupted for 24 hours or more,
the System 734 loses all of its
memory settings.
Recalling a Stored Station
BAND
1. Press
band.
to select the desired
2. If P- followed by a number does
not appear on the display, press
PRESET
. P- appears on the dis-
play along with the last selected
preset station.
TUNING UP
3. Repeatedly press
or
DOWN PRESET/TUNING
, or
s or t
on the remote control, until the
desired station appears on the
display.
Note: To tune in stations that are not
PRESET
stored in memory, press
so
P- disappears from the display, then
tune in the desired station.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 18 Wednesday, July 14, 1999 4:50 PM
CD CHANGER OPERATION
The System 734 lets you load up to
three CDs at once and gives you many
options to control the order in which
the CDs play.
3. Carefully place a CD in slot num-
ber 1 with the label facing up.
LOADING AND PLAYING
A CD
1. Repeatedly press FUNCTION until
appears next to CDon the dis-
play. dISC appears.
4. To load a CD in each of the other
slots (2 and 3), repeatedly press
DISC SKIP to rotate the CD tray
until the desired slot appears.
2. Press OPEN/CLOSE. OPEN ap-
pears on the display, then the CD
changer drawer opens.
5. Press OPEN/CLOSE. The CD
changer drawer closes, dISC 1
and 1 0:00 appear, then the
total number of tracks and playing
time appear.
6. To play the CD loaded in slot 1
(Disc 1), press PLAY/PAUSE.
Caution: Do not try to force the
CD drawer open or closed. You
might damage its loading mecha-
nism.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 19 Wednesday, July 14, 1999 4:50 PM
To play a different CD, repeatedly
press DISC SKIP until the desired
disc number appears on the dis-
play.
• To display the current track’s
remaining play time during play,
press DISPLAY on the remote
control once. Press it again to
display the entire CD’s remain-
ing play time. Press it a third
time to return to the elapsed
play time.
The selected dISC number
flashes on the CD changer, 1
(the track number) and
appear, then the CD begins to
play and its elapsed play time
appears on the display.
• The System 734 displays the
selected CD’s total playing time
and number of tracks at all
times before and after play. To
briefly display this information
during play, press TIME on the
remote control.
Notes:
• To skip over, search, or repeat
tracks,
see
“Special
CD
Changer Features.”
• To briefly stop play, press PLAY/
PAUSE.
appears on the dis-
play.
7. Adjust VOLUME, or VOLUME s/t on
the remote control, and select the
desired E-BASS and equalizer set-
tings.
To resume play, press PLAY/
PAUSE again. disappears.
8. The System 734 automatically
stops play at the end of the high-
est numbered CD loaded in the
system.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 20 Wednesday, July 14, 1999 4:50 PM
To stop the CD changer at any
time during play, press STOP. The
selected CD’s total number of
tracks and playing time appear.
SPECIAL CD CHANGER
FEATURES
Automatic Search Music
System (ASMS)
The automatic search music system
lets you skip forward or backward
through the tracks on all loaded CDs.
Loading/Unloading CDs
During Play
The System 734’s rotating 3-disc CD
changer lets you load and unload up to
two CDs while a third CD is playing.
• To skip to the beginning of the
next track during play, press and
>>
release SKIP/SEARCH
.
1. During play, press OPEN/CLOSE.
The CD changer drawer opens,
and the currently selected CD
continues playing.
• To return to the beginning of the
current track during play, press
<<
and release SKIP/SEARCH
.
• To skip forward or backward
through additional tracks, repeat-
edly press and release SKIP/
>>
<<
SEARCH
or
until the
desired track number appears on
the display.
• To skip forward or backward 10
+
tracks at a time, press 10 then
>> <<
until the
desired track number appears on
the display.
SKIP/SEARCH
or
2. Unload and/or load CDs in the
exposed disc slots.
3. Press OPEN/CLOSE again to close
the CD changer drawer.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 21 Wednesday, July 14, 1999 4:50 PM
2. To briefly stop random play, press
PLAY/PAUSE.
appears on the
display. To resume play, press
Audible Search
To search forward or backward during
play, press and hold down SKIP/
PLAY/PAUSE again.
pears.
disap-
>>
<<
SEARCH
or
. The CD rapidly
advances, and you hear the tracks at a
high speed and low volume. Release
3. The System 734 continuously
plays tracks randomly. To stop the
CD changer at any time during
random play, press STOP. RAN-
>>
<<
SKIP/SEARCH
or
to resume
normal play.
DOM,
, and the CD’s elapsed
play time disappear, then the
selected CDs total number of
tracks and playing time appear.
Random Play
The System 734 lets you set the CD
changer to play the tracks on all CDs in
random order.
1. With at least one CD in the CD
changer and no CD playing, press
RANDOM on the remote control.
RANDOM,
, and the first ran-
domly selected disc and track
number appear on the display.
Then the track begins to play, and
its elapsed play time appears.
Note: To cancel random play and
resume normal play without stop-
ping play, simply press RANDOM
or OPEN/CLOSE. RANDOM disap-
pears from the display, and the
CD changer resumes normal play.
Note: To skip to another randomly
selected track, press and release
>>
<<
SEARCH
or
.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 22 Wednesday, July 14, 1999 4:50 PM
INTRO Scanning
Repeat Play
The INTRO (introduction) scanning
feature lets you review the first 10 sec-
onds of each track on all loaded CDs.
To use the INTRO scanning feature,
simply press INTRO SCAN. INTROap-
pears on the display, and the CD
changer plays the first 10 seconds of
each track on all loaded CDs, begin-
ning with the first track on the lowest
numbered CD.
The System 734 lets you continuously
repeat a single track, all tracks on a
loaded CD, or a programmed se-
quence of tracks (see “Programmed
Play”).
To continuously repeat a single track,
press REPEAT once before or during
play so REPEAT1appears on the dis-
play.
Note: You can search forward or back-
ward during INTRO scanning.
To continuously repeat all tracks on
the selected CD, press REPEAT twice
before or during play so REPEATap-
pears on the display.
To cancel INTRO scanning and stop
play, press STOP. The CD stops and
INTROdisappears from the display.
To continuously repeat a programmed
sequence, first program the tracks you
want to play, then press REPEAT twice
before or during play so REPEAT ap-
pears on the display along with PRO-
GRAM.
To cancel INTRO scanning without
stopping play, press INTRO SCAN
again. INTRO disappears, and the
CD changer resumes normal play from
the beginning of the current track.
To cancel repeat play before, during,
or after play, press REPEAT so RE-
PEAT or REPEAT1 disappears from
the display. If repeat is cancelled dur-
ing play, the CD changer resumes nor-
mal play.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 23 Wednesday, July 14, 1999 4:50 PM
2. Press DISC SKIP so dISCand the
desired CD number appear along
with PROGRAM.
Cue
To select a track before you begin play
or after pressing PLAY/PAUSE to pause
the current CD, press SKIP/SEARCH
>>
<<
or
until the desired track num-
ber appears on the display. Then press
PLAY/PAUSE to play the track.
PROGRAMMED PLAY
>>
<<
to
3. Press SKIP/SEARCH
or
select the desired track.
You can program the CD changer to
play up to 32 tracks in any order you
choose, and you can program the
same CD or track to play more than
once.
Storing/Playing a
Programmed Sequence
Notes:
• To skip forward or backward 10
1. With at least one CD in the CD
changer and no CD playing, press
PROGRAM. PROGRAM and P-01
(memory position number 01)
appear on the display.
tracks at a time, press 10+ then
>>
<<
SKIP/SEARCH
or
until
the desired track number
appears on the display.
• If you store a track number that
does not exist on the selected
CD, the CD changer simply
skips to the next stored track
during programmed play.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 24 Wednesday, July 14, 1999 4:50 PM
4. To store the selected track, press
PROGRAM again. The memory
position number automatically
increases by 1 to indicate it is
ready to store the next track. For
example, after you press PRO-
GRAM to store the track in P-01,
P-02automatically appears.
Notes:
• To briefly stop programmed
play, press PLAY/PAUSE.
appears on the display. To
resume
press PLAY/PAUSE again.
disappears.
programmed
play,
• Pressing DISC SKIP has no
5. Repeat Steps 2-4 to store up to 32
tracks.
effect during programmed play.
7. Programmed play automatically
stops at the end of the last pro-
grammed track. To stop the CD
changer at any time during pro-
grammed play, press STOP.
and the CD’s elapsed play
time disappear, then the total
number of tracks and playing time
appear.
If you try to store more than
Note:
32 tracks, the CD changer auto-
matically begins reviewing the
tracks already stored, beginning
with the first track (see “Reviewing
a Programmed Sequence”). C-
(check) appears on the display,
followed by memory position num-
ber (01, for example). This infor-
mation remains on the display
until you begin programmed play.
6. Press PLAY/PAUSE to play the
programmed
sequence.
The
selected disc number flashes on
the CD changer, the first pro-
grammed track number and
appear, then the programmed
track begins to play and its
elapsed play time appears on the
display.
Notes:
• Repeat Step 6 to play the pro-
grammed sequence again.
• To replace a programmed track,
press PROGRAM until the memory
position number of the track you
want to replace appears on the
display. Then repeat Steps 2-4 to
select and store the new track in
its place.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 25 Wednesday, July 14, 1999 4:50 PM
• To resume regular or random play
Erasing a Programmed
Sequence
after storing
a
programmed
sequence, you must first erase the
programmedsequence (see “Eras-
ing a Programmed Sequence”).
You can do any of the following to
erase a programmed sequence:
• Press STOP before or after pro-
grammed play.
Reviewing a Programmed
Sequence
• Press OPEN/CLOSE before, dur-
ing, or after programmed play.
To review a programmed sequence,
while play is stopped, repeatedly press
PROGRAM. As you press it, the dISC
and track number, and C-(check) fol-
lowed by the memory position number
of each stored track appears.
• Press POWER before, during, or
after programmed play.
PROGRAM disappears from the dis-
play.
Note: This review information stays on
the display until you press PLAY/
PAUSE to play the sequence, or until
you erase the sequence (see “Erasing
a Programmed Sequence”).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 26 Wednesday, July 14, 1999 4:50 PM
Cautions:
CD AND CD CHANGER
CARE TIPS
• To avoid damaging the CD
changer, do not place anything
but a CD in the CD drawer.
Although a CD is very durable, you
should handle it with care. We recom-
mend the following precautions.
• Remove any loaded CDs from the
CD changer before moving the
System 734 to prevent damaging
the CDs.
• Keep the CD in its protective case
or sleeve when you are not play-
ing it.
• Moving the CD changer suddenly
from a cold place to a warmer one
can cause moisture to form on the
pickup lens and disrupt operation.
If this happens, wait about one
hour before playing a CD.
• Keep the CD clean. Your local
Radio Shack store sells a suitable
CD cleaner kit.
• Keep the CD dry. A drop of mois-
ture can act as a lens and affect
the laser beam’s focus. If it gets
wet, wipe the CD with a soft, dry
cloth before playing it.
• Do not write on either side of a
CD, especially the non-label side.
• Handle the CD by its edges to
avoid fingerprints and surface
scratches, which can prevent the
laser from accurately reading the
CD. If the CD gets scratched, use
Scratch ‘n’ Fix (Radio Shack Cat.
No. 42-127) to keep the CD from
skipping during play.
• Do not store CDs in high-tempera-
ture, high-humidity locations.
If the System 734 is subjected to a
sudden shock or jolt during play, the
CD’s rotation speed might suddenly
change, and the music might be briefly
interrupted. This is not a malfunction.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 27 Wednesday, July 14, 1999 4:50 PM
CASSETTE DECK OPERATION
The System 734 has a dual cassette
LOADING A TAPE
deck system which lets you automati-
cally play one side of two cassette
tapes consecutively, record from the
CD changer, record one cassette tape
onto another, and more.
1. Press STOP/EJECT on the desired
tape deck (TAPE 1 or TAPE 2) to
open the cassette compartment
door.
Note: TAPE 1 both plays back
and records. TAPE 2 only plays
prerecorded cassette tapes.
Notes:
• The remote control does not oper-
ate the System 734’s cassette
deck.
2. Insert the cassette tape with the
exposed tape edge facing down,
the side you want to play facing
you, and the full reel to the left.
• The System 734’s Automatic
Level Control (ALC) feature auto-
matically adjusts the recording
level. The VOLUME, E-BASS, and
ROCK, POP, or CLASSIC settings
have no effect on the recording.
• Tape quality greatly affects the
quality of the recording. We rec-
ommend regular length (60- or 90-
minute) cassette tapes. We do not
recommend long-play cassette
tapes, such as C-120s, because
they are thin and can easily tangle
in the cassette mechanism. For
low-noise, wide-range recordings,
use normal-bias tape.
3. Close the door.
PLAYING A TAPE
1. Repeatedly press FUNCTION until
appears next to TAPE on the
display.
• Before you load a cassette tape
for recording, turn the cassette’s
hub with your finger or a pencil to
take up any slack and move the
tape past its leader. (Avoid touch-
ing the tape with your fingers.)
• Before recording, be sure the cas-
sette tape’s erase-protection tabs
are in place. See “Preventing
Accidental Erasure.”
27
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 28 Wednesday, July 14, 1999 4:50 PM
2. Press PLAY. The tape begins to
4. The System 734 automatically
stops the tape when it reaches the
end. To stop the tape at any time
during playback, press STOP/
EJECT.
play.
Notes:
• To briefly stop the tape during
playback, press PAUSE. The
button locks and the tape stops.
Press PAUSE again to continue
playback.
Consecutive Play
You can set the System 734 to auto-
matically play one side of the cassette
tape in TAPE 2, then play one side of
the cassette in TAPE 1.
1. Load the first cassette tape you
want to play into TAPE 2, and the
other into TAPE 1. Be sure the
side of the tape you want to play is
facing out on each deck, with the
full reel to the left.
• To rapidly fast-forward or
rewind a cassette tape in either
deck while the tape is stopped,
press FAST-F (fast-forward) or
REWIND. The button locks and
the tape fast-forwards or
rewinds.
The System 734 automatically
stops the tape when it reaches the
end. To stop the tape at any time
during fast-forwarding or rewind-
ing, press STOP/EJECT.
2. Press PLAY on TAPE 2. The tape
in TAPE 2 begins to play.
3. Adjust VOLUME, or VOLUME s/t on
the remote control, and select the
desired E-BASS and equalizer set-
tings.
3. Press PAUSE then PLAY on TAPE
1. Both buttons lock.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 29 Wednesday, July 14, 1999 4:50 PM
When the tape in TAPE 2 reaches
the end, the tape in TAPE 1 auto-
matically begins to play.
Recording from a CD
Follow these steps to record from a CD
onto a cassette tape.
Note: To briefly stop the tape in
FUNCTION
until
either deck during playback, press
1. Repeatedly press
PAUSE
on the desired deck. The
button locks and the tape stops.
PAUSE
appears next to CDon the dis-
play, then load the CDs you want
to record into the CD changer.
Press
playback.
again to continue
4. At the end of the tape in TAPE 1,
the system automatically stops
the tape. To stop playback on
either deck at any time, press
STOP/EJECT
PLAY
on that deck.
releases.
2. Load a blank cassette tape, or
one you want to record over, into
TAPE 1.
STOP/EJECT
Note: If you press
on
TAPE 2 during play, the tape in
TAPE 1 automatically begins to
play.
3. To record the tracks from all
PLAY/
loaded CDs in order, press
PAUSE
on the CD changer twice.
RECORDING A
CASSETTE TAPE
appears on the display, and
the CD changer pauses on disc 1,
track 1.
The System 734 lets you record onto a
cassette tape from the CD changer, ra-
dio, or another cassette tape.
Note: You can also record from an ad-
ditional audio source (see “Recording
from an Additional Audio Source”).
Note: To record only selected
tracks or change the sequence in
which the tracks are recorded, you
must first program a sequence
(see “Programmed Play”), then
Caution: Never try to force down
RECORD
after you remove an erase-
protection tab from a cassette tape
(see “Preventing Accidental Erasure).
You might damage the recording
mechanism.
PLAY/PAUSE
press
twice.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 30 Wednesday, July 14, 1999 4:50 PM
4. Press RECORD on TAPE 1 and
PLAY/PAUSE on the CD changer
at the same time to begin record-
6. The System 734 automatically
stops the tape when it reaches the
end. To stop the tape at any time
during recording, press STOP/
EJECT on TAPE 1.
ing.
disappears,
appears
along with the CD’s elapsed play
time, PLAY locks down along with
RECORD, and the tape begins
recording.
To stop the CD during or after
recording, press STOP on the CD
changer.
Notes:
The System 734 automati-
Note:
• You cannot change the function
cally stops the CD changer when
it reaches the end of all loaded
while RECORD is pressed down
CDs
or
the
programmed
• To briefly stop the tape while
recording, press PAUSE on
TAPE 1. The button locks and
the tape stops. Press PAUSE
again to resume recording.
sequence. If the tape is still
recording, press STOP/EJECT on
TAPE 1 to stop the tape.
Copying Cassette Tapes
• To briefly stop the CD while
recording, press PLAY/PAUSE
on the CD changer.
appears on the display. To
resume play, press PLAY/
PAUSE.
The System 734 lets you dub (copy)
one cassette tape to another, one side
at a time, using its dual cassette decks
(TAPE 1 and TAPE 2).
1. Repeatedly press FUNCTION until
appears next to TAPE on the
display.
5. To listen to the CD during record-
ing, adjust VOLUME, or VOLUME s/
t on the remote control, and select
the desired E-BASS and equalizer
settings.
2. Load a blank cassette tape, or
one you want to record over, into
TAPE 1.
3. Load the tape you want to record
from into TAPE 2.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 31 Wednesday, July 14, 1999 4:50 PM
4. Press RECORD, then PAUSE on
TAPE 1. PLAY automatically locks
down.
7. To listen to the tape in TAPE 2
during recording, adjust VOLUME,
or VOLUME s/t on the remote con-
trol, and select the desired E-
BASS and equalizer settings.
If you use HIGH SPEED dur-
Note:
ing recording, you hear the sound
at one and a half times the normal
speed.
5. To record at one and a half times
the normal speed, press HIGH
SPEED. HI-DUBBappears on the
display. To set it back to normal
speed, press HIGH SPEED again.
HI-DUBBdisappears.
8. To briefly stop the tape in either
deck while recording, press
PAUSE on that deck. The button
locks and the tape stops. Press
PAUSE again to resume recording.
9. The System 734 automatically
stops the tape in each deck when
that tape reaches the end of the
side.
To stop the tapes in both decks at
any time during recording, press
STOP/EJECT on both decks. PLAY
releases on TAPE 2, RECORD and
PLAY release on TAPE 1, and
recording stops.
6. Within 5 seconds, press PLAY on
TAPE 2. The tape in TAPE 2
begins to play, PAUSE automati-
cally releases on TAPE 1, and
TAPE 1 begins to record.
: If you are unable to press
Note
PLAY within 5 seconds, HI-DUBB
disappears. If this happens,
repeat Step 5 then try again.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 32 Wednesday, July 14, 1999 4:50 PM
5. To listen to the radio during
recording, adjust VOLUME, or
VOLUME s/t on the remote control,
and select the desired E-BASS
and equalizer settings.
Recording from the Radio
The System 734 lets you record onto a
cassette tape from any AM or FM radio
station. You can also set it to automat-
ically turn on at a preset time and begin
recording from the radio.
6. The System 734 automatically
stops the tape when it reaches the
end. To stop the tape at any time
during recording, press STOP/
EJECT on TAPE 1. RECORD and
PLAY release, and recording
stops.
1. Press BAND to select AM or FM,
then tune to the desired station.
2. Load a blank cassette tape, or
one you want to record over, into
TAPE 1.
To set your System 734 to automati-
cally begin recording from the radio at
a preset time, first set and turn on the
on/off timer (see “Setting the On/Off
Timer”). Then follow Steps 1-3 above.
Next, press POWER to turn off the sys-
tem, then release pause on TAPE 1. At
the preset time, your system automati-
cally turns itself on and immediately
begins recording from the radio.
3. Press RECORD and PAUSE on
TAPE 1. PLAY automatically locks
down.
4. Release PAUSE on TAPE 1 to
begin recording.
Note: To briefly stop the tape
while recording, press PAUSE on
TAPE 1. The button locks and the
tape stops. Press PAUSE again to
resume recording.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 33 Wednesday, July 14, 1999 4:50 PM
If you break off a tab and decide later
that you want to record on that side of
the tape, carefully cover that side’s tab
hole with a piece of adhesive tape.
TAPE TIPS
Erasing a Cassette Tape
To record over a cassette tape, simply
record over the previous recording. To
erase the entire cassette tape, select a
Caution: Removing the erase-protec-
tion tab does not prevent a bulk eraser
from erasing a cassette tape.
CD
function with no audio (such as
with
no CD playing) and let the tape record
to the end.
Restoring Tape Tension and
Sound Quality
Note: The tape you are recording over
must be a normal bias-type tape.
After you play a cassette tape several
times, the tape might become tightly
wound on the reels. This can cause
playback sound quality to deteriorate.
To quickly erase a tape, you might pre-
fer to use a bulk tape eraser (available
at your local Radio Shack store).
To restore the sound quality, fast-for-
ward the tape from the beginning to the
end of one side, then completely re-
winding it. Then loosen the tape reels
by gently tapping each side of the cas-
sette’s outer shell on a flat surface.
Preventing Accidental
Erasure
Cassette tapes have two erase-protec-
tion tabs — one for each side.
Caution: Be careful not to damage the
cassette when tapping it. Do not touch
the exposed tape or allow any sharp
objects near the cassette.
To protect a recording from being acci-
dentally recorded over or erased,
break off that side’s plastic tab with a
screwdriver.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 34 Wednesday, July 14, 1999 4:50 PM
USING AN ADDITIONAL AUDIO SOURCE
If you connected an additional audio
RECORDING FROM AN
ADDITIONAL AUDIO
SOURCE
source, such as a TV, VCR, turntable,
or an external CD changer or cassette
deck (see “Connecting an Additional
Audio Source”), you can use your Sys-
tem 734 to listen to or record from that
source.
Follow these steps to record onto a
cassette tape from an additional audio
source.
1. Set VOLUME, or press VOLUME t
on the remote control, to its lowest
setting, and be sure that the audio
source’s volume control (if any) is
also set to its lowest level.
LISTENING TO AN
ADDITIONAL AUDIO
SOURCE
1. Set VOLUME, or press VOLUME t
on the remote control, to its lowest
setting, and be sure that the audio
source’s volume control (if any) is
also set to its lowest level.
2. Repeatedly press FUNCTION until
appears next to AUX on the
display. The current time appears.
3. Load a blank cassette tape, or
one you want to record over, into
TAPE 1.
2. Repeatedly press FUNCTION until
appears next to AUX on the
display. The current time appears
on the display.
4. Press RECORD and PAUSE on
TAPE 1. PLAY automatically locks
down.
5. Begin play on the additional audio
source as instructed in its owner’s
manual.
6. Release PAUSE on TAPE 1 to
begin recording.
7. To listen to the audio source’s
sound while recording, adjust
VOLUME, or VOLUME s/t on the
remote control, and the audio
source’s volume control (if any) to
the desired level.
3. Operate the audio source accord-
ing to its owner’s manual.
4. Adjust VOLUME, or VOLUME s/t on
the remote control, and the audio
source’s volume control (if any) to
the desired level.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 35 Wednesday, July 14, 1999 4:50 PM
8. To briefly stop the tape while
recording, press PAUSE on TAPE
1. The button locks and the tape
stops. Press PAUSE again to
resume recording.
9. The System 734 automatically
stops the tape when it reaches the
end. To stop the tape at any time
during recording, press STOP/
EJECT on TAPE 1. RECORD and
PLAY release, and recording
stops.
10. Stop play on the additional audio
source as instructed in its owner’s
manual.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 36 Wednesday, July 14, 1999 4:50 PM
TROUBLESHOOTING
If your system is not working as it should, these suggestions might help you elimi-
nate the problem. If the system still does not operate normally, take it to your local
Radio Shack store for assistance.
Symptom
Possible Cause
Suggestion
Power does not turn on
Power problem.
Check the AC power cord and
AC outlet.
POWER
when
is pressed
Adjust VOLUME toward UP (or
press VOLUME s on the remote
control).
VOLUME DOWN/UP
No sound.
set
too low.
No sound when function is
selected.
Wrong function
selected or speakers
connected incorrectly.
Select another function or
check speaker connections.
External audio source. Start the external audio
source.
CD Changer does not
work.
CD loaded upside
down.
Load CD correctly.
Sound from CD skips.
CD is dirty or dam-
aged.
Clean CD and reload it or try
a new CD.
Poor sound quality during
cassette tape playback.
Cassette tape heads,
capstands, or pinch
rollers are dirty.
Clean cassette decks (see
“Cleaning the Tape Handling
Parts”).
Record does not work.
Erase-protection tabs
are removed from the
cassette tape.
Put a piece of tape over the
holes where the erase-protec-
tion tabs were.
Output sound is not ste-
reo.
The station you are
listening to is an AM
station or you are not
receiving a stereo sig-
nal from the FM sta-
tion.
Try another FM station you
can receive in stereo.
FM MONO
STEREO
.
. is not set to
.
Set FM mode to
STEREO
36
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 37 Wednesday, July 14, 1999 4:50 PM
CARE AND MAINTENANCE
Your Optimus System 734 Mini Stereo Component System is an example of supe-
rior design and craftsmanship. The following suggestions will help you care for the
System 734 so you can enjoy it for years.
Keep the System 734 dry. If it gets wet, wipe it dry immediately. Liq-
uids contain minerals that can corrode the electronic circuits
Handle the System 734 gently and carefully. Dropping it can damage
the circuit boards and can cause the System 734 to work improperly.
Use and store the System 734 only in normal temperature environ-
ments. Temperature extremes can shorten the life of electronic de-
vices, damage batteries, and distort or melt plastic parts.
Keep the System 734 away from dust and dirt, which can cause pre-
mature wear of parts.
Wipe the System 734 with a damp cloth occasionally to keep it look-
CLEANER
ing new. Do not use harsh chemicals, cleaning solvents, or strong de-
tergents to clean the System 734.
Modifying or tampering with the System 734’s internal components can cause a mal-
function and might invalidate your System 734’s warranty. If your System 734 is not
performing as it should, take it to your local Radio Shack store for assistance.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 38 Wednesday, July 14, 1999 4:50 PM
deck after every 20 hours of tape play-
er operation.
THE FCC WANTS YOU
TO KNOW
1. Disconnect power.
This stereo system complies with the
limits for a Class B digital device as
specified in Part 15 of FCC Rules.
These limits provide reasonable pro-
tection against radio and TV interfer-
ence in a residential area. However,
your stereo system might cause TV or
radio interference even when it is oper-
ating properly. To eliminate interfer-
ence, you can try one or more of the
following corrective measures:
2. Open the cassette compartment
door on each deck.
PLAY
3. Press
on each deck to
expose the tape-handling parts.
4. Use a cotton swab dipped in
denatured alcohol or tape head
cleaning solution to clean each
deck’s record or play head, pinch
roller, capstan, and erase head
(TAPE 1 only).
• Reorient or relocate the receiving
antenna
• Increase the distance between the
stereo system and the radio or TV
• Use outlets on different electrical
circuits for the stereo system and
the radio or TV
Consult your local Radio Shack store if
the problem still exists.
You must use shielded interface ca-
bles with this stereo system.
5. When you finish cleaning, press
STOP/EJECT
and close each
CLEANING THE TAPE-
HANDLING PARTS
deck’s cassette compartment
door. Then reconnect power
Your local Radio Shack store sells a
complete line of cassette deck clean-
ing supplies.
Dirt, dust or particles of the tape’s coat-
ing can accumulate on the tape heads
and other parts that the tape touches.
This can greatly reduce the perfor-
mance of the cassette player. Use the
following cleaning procedure for each
38
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 39 Wednesday, July 14, 1999 4:50 PM
SPECIFICATIONS
CD CHANGER
Frequency Response .........................................................................20 – 20000 Hz
Signal-to-Noise Ratio..................................................................85 dB (1 kHz, 0 dB)
Harmonic Distortion...................................................................0.05% (1 kHz, 0 dB)
Separation ........................................................................................................70 dB
Wow & Flutter.......................................................................................Undetectable
CD Used Diameter ..........................................5-inch (120 mm) and 3-inch (80 mm)
Signal Format .........................D-A Conversion, 6-Bit Linear/Channel Transmission
Bit Rate........................................................................................................... 4.3218
MB/Second Sampling Frequency.................................................. 44.1 kHz Pick-Up
System.......................................................................................Non-Contact Optical
Optical Source......................................................................... Semiconductor Laser
Wavelength.................................................................................................... 780 nm
Rotation Speed ................................................Approximately 200 – 500 rpm (CLV)
Error Correction...............................................................................Cross Interleave
Reed Solomon Code Number of Channels ............................................................. 2
AMPLIFIER
Audio output power * ...............................15 Watts/Channel (minimum RMS power)
*Output at no more than 1.0% total harmonic distortion into 6 ohms, over the
audio spectrum, 65 to 15,000 Hz.
Frequency Response .........................................................................35 – 20000 Hz
Input Sensitivity .............................................................................................400 mV
Signal-to-Noise Ratio (A-WTD) ........................................................................72 dB
Harmonic Distortion...................................................... 0.06% (8 W, 1 kHz, 6 ohms)
TUNER (FM)
Frequency Range..........................................................................87.9 – 107.9 MHz
Usable Sensitivity (IHF).......................................1.4 mV (75 ohms),14.3 dBf, 50 dB
S/N Sensitivity (Stereo) ....................................................................................3 dBf
IF Rejection ......................................................................................................75 dB
Image Rejection................................................................................................40 dB
Capture Ratio .................................................................................................1.0 dB
AM Suppression ...............................................................................................40 dB
Signal-to-Noise Ratio
Mono .............................................................................................................76 dB
Stereo............................................................................................................70 dB
39
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 40 Wednesday, July 14, 1999 4:50 PM
Distortion:
Mono .................................................................................................. 0.3%, 1 kHz
Stereo.................................................................................................. 0.5%, 1 kHz
Alternate Channel Selectivity .........................................................50 dB (±400 kHz)
Frequency Response ................................................ 30 to 15 kHz (+0.5 dB, –3 dB)
Stereo Separation ...............................................................................(1 kHz) 33 dB
Antenna..................................................................................75 ohms (unbalanced)
TUNER (AM)
Frequency Range ........................................................................... 530 – 1710 kHz
Sensitivity (20 dB S/N) ............................................................................. 350 mV/m
IF Rejection (at 1.000 kHz) .............................................................................. 50 dB
Image Rejection (at 1.000 kHz) ....................................................................... 35 dB
Signal-to-Noise Ratio ...............................................................53 dB (100 dB input)
Selectivity ............................................................................................22 dB (9 kHz)
Total Harmonic Distortion................................................................................. 0.8%
Antenna...............................................................................................Loop Antenna
DUAL CASSETTE DECK
Speed Accuracy............................................................................................. ± 3.5%
7
Tape Speed (Normal)...................................................................1 /8 ips (4.75 cm/s)
Frequency Response......................................................................... 50 – 12000 Hz
Distortion........................................................................................................... 1.5%
Crosstalk (at 1 kHz) ......................................................................................... 60 dB
Track Format............................................................................4 Tracks, 2 Channels
Recording System.........................................................................................AC Bias
Erasure System .............................................................................................Magnet
Erase Ratio (at 400 Hz) ................................................................................... 65 dB
Motor DC ......................................................................................................... Servo
SPEAKERS
Impedance ...........................................................................................................6 Ω
Woofer ...................................................................... 51/4 Inches (130 mm) diameter
Cone Tweeter ............................................................. 21/4 Inches (60 mm) diameter
Cone Power Handling .......................................................................15 watts (RMS)
Maximum Power .......................................................................................... 30 watts
Output Sound Pressure Level..................................................................87 dB/W/m
Dimensions (HWD) .......................................................1213/32 × 79/32 × 719/32 Inches
(315 × 185 × 193 mm)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 41 Wednesday, July 14, 1999 4:50 PM
Cabinet Type ....................................................................................................2-way
Weight ..........................................................................................6 lbs. 10 0z. (3 kg)
INFRARED REMOTE CONTROL
Controls ........................................................................................................ 27 Keys
Power Requirements.......................................................3 V DC (Two AA Batteries)
(Cat. No. 23-552)
GENERAL
Power Requirements...................................................................... 120 V AC, 60 Hz
Power Consumption (Total) ...............................................................................75 W
Dimensions (Main Unit) (HWD) ..........................................123/8 × 105/8 × 13 Inches
(315 × 270 × 330 mm)
Weight (Main Unit).......................................................................22 lbs, 1 oz (10 kg)
Accessories ..................................FM Antenna, AM Loop Antenna, Remote Control
Specifications are typical; individual units might vary. Specifications and design are
subject to change and improvement without notice.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 42 Wednesday, July 14, 1999 4:50 PM
NOTES
42
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 43 Wednesday, July 14, 1999 4:50 PM
43
Download from Www.Somanuals.com. All Manuals Search And Download.
13-1279.fm Page 44 Wednesday, July 14, 1999 4:50 PM
RADIO SHACK LIMITED WARRANTY
This product is warranted against defects for 90 days from date of pur-
chase from Radio Shack company-owned stores and authorized Radio
Shack franchisees and dealers. Within this period, we will repair it with-
bring your Radio Shack sales
as proof of purchase date to any Radio Shack store. Warranty does
out charge for parts and labor. Simply
slip
not cover transportation costs. Nor does it cover a product subjected to
misuse or accidental damage.
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES ARE LIM-
ITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. Some states do not permit limita-
tion or exclusion of implied warranties; therefore, the aforesaid limita-
tion(s) or exclusion(s) may not apply to the purchaser.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.
We Service What We Sell
9/94
RADIO SHACK
A Division of Tandy Corporation
Fort Worth, Texas 76102
7A5
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|