R
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
OPEN
REMOTE
Human
Equalizer
CQ-VX2200
REVERSE
SEL
SA
PWR
SOURCE
SKIP
ST
EQ
NR
S·ANALYZER
SPACE
POSI
B
FM■ DISC
D·M
CQ-VX2200W
DISC
REP
AM45DISC
R
SCAN
TPS
LOC
AUTO·P MUTE
MTL
Operating Instructions
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
DISP
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
¡Please read these instructions carefully before using this product and keep this manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
E
N
G
L
I
S
H
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this
product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechani-
cal engineering, manufactured with carefully selected components and assembled by people who take
pride in their work. Once you discover the quality, reliability, and value we have built into this product, you
too will be proud to be a member of our family.
❏ Use This Product Safely
When Driving
Disc Mechanism
Keep the volume level low enough to be aware of road
and traffic conditions.
Do not insert coins or any small objects. Keep screw-
drivers and other metallic objects away from the disc
mechanism and disc.
When Washing Your Car
Do not expose the product, including the speakers, CDs
and tapes to water or excessive moisture. This could
cause electrical shorts, fire, or other damage.
Tape Mechanism
Keep magnets, screwdrivers or other metallic objects
away from the tape mechanism and tape head to prevent
poor performance or malfunctions.
When Parked
Parking in direct sunlight can produce very high tempera-
tures inside your car. Give the interior a chance to cool
down before switching the unit on.
Use Authorized Service Centers
This product is made of precision parts. Do not attempt
to disassemble or adjust any parts. For repair, please
consult your nearest authorized Panasonic Service
Center.
Use the Proper Power Supply
This product is designed to operate with a 12 V DC, nega-
tive ground battery system.
For Installation
The product should be installed in a horizontal position
with the front end up at a convenient angle, but not more
than 30˚.
❏ Components
¡Operating instructions. . . . . . . . . . . . . . . . . . . . . . . . . 1
¡Installation hardware . . . . . . . . . . . . 1 set (a page 32)
¡Power connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
¡Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 1
¡Lithium battery (CR2025) . . . . . . . . . . . . . . . . . . . . . . 1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Remote Control
Control Reference Guide
Battery Installation
Point the remote control unit at the main unit’s sensor (REMOTE).
1
Lithium battery
(+ side face up)
Back side
PWR (Power)
¡Power ON/OFF
MUTE / ATT (Attenuator)
¡Mute the sound temporarily
eInstall the
battery
¡Decrease the volume to 1/10
SOURCE
¡Change source
VOL (Volume)
¡Adjust volume
Battery holder
wPull
qWhile pushing
SEL (Select)
¡Select the setting item
¡Change MONO/LOCAL
¡Battery Type:
Panasonic lithium battery
(CR2025)
¡Battery Life:
Approximately 6 months with
normal use (at room temperature)
DISP (Display)
¡Change display
SPACE
¡Change sound space
Caution: Improper use of bat-
teries may cause overheating,
an explosion, ignition, resulting
in injury or a fire. Battery leak-
age may damage the unit.
][ (TUNE) / 1 2 (TRACK)
¡Change frequency
¡Change track
BAND
¡Change band
¡Auto preset memory
PRG (Program)
¡Reverse the tape play
side
■ (Stop)
¡Stop the tape rewind or
¡Do not disassemble or short
the battery. Do not throw a bat-
tery into a fire.
¡Keep batteries away from chil-
dren to avoid the risk of acci-
dents.
¡Select / Adjust the item
} {(DISC)
¡Change disc
¡Select / Adjust the item
¡Be careful to observe proper
local disposal rules when you
dispose of batteries.
fast forward
Spectrum Analyzer
¡Change Spectrum Analyzer pattern
¡Arrange Spectrum Analyzer
DIMMER
¡Change the dimmer level
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
Name of Controls and Functions
S
H
PWR (Power) / SOURCE
¡Power ON/OFF
¡Change source
} {(DISC)
¡Change band
2
¡Change tape side
¡Change disc
¡Select / Adjust the item
OPEN
¡Open the panel
Display (VFD)
SEL (Select)
DISP (Display)
¡Select the setting ¡Change display
S•A (Spectrum Analyzer)
¡Change Spectrum Analyzer pattern
¡Arrange Spectrum Analyzer
item
OPEN
REMOTE
Human
Equalizer
CQ-VX2200
REVERSE
SEL
S·A
PWR
SOURCE
SKIP
ST
EQ
NR
S·ANALYZER
SPACE
POSI
B
FM■ DISC
D•M (Direct Memory)
¡Recall the direct memory
D·M
DISC
REP
AM45DISC
¡Memorize the frequency
R
SCAN
AUTO·P MUTE
TPS
MTL
LOC
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
MUTE / ATT (Attenuator)
AUTO•P (Auto Preset Memory)
DISPLAY CLOCK
DISP
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
¡Mute the sound temporarily
¡Decrease the volume to 1/10
¡Auto preset memory
SPACE
1
2
3
4
MTL
B NR
TPS
SKIP
REPEAT
VOL (Volume)
¡Adjust volume
][ (TUNE) / s d (TRACK)
¡Change frequency
¡Change track
REMOTE
(Remote control sensor)
¡Select / Adjust the item
SPACE
¡Change sound space
1 to 6
¡Preset memory / Recall preset memory
¡Memorize GEQ level adjustment / Recall GEQ level adjustment
¡Random ....... [4]
¡Scan ............. [5]
For details about terminals
on the rear of the unit, please
see "Electrical Connections"
(a page 37)
¡Repeat .......... [6]
Behind the Front Panel
CD Slot
CD IN
LARGE FLUORESCENT DISPLAY ■
41W x 4CH AMPLIFIER ■
15 BAND SPECTRUM ANALYZER ■
FLIP DOWN PANEL ■
u
CD u(Eject)
CD EJECT
CST EJECT
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
CST IN
u
CST (Cassette tape)
u(Eject)
Cassette Tape Slot
RESET
Reset Switch
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
Power and Basic Operations
ACC
S
H
¡
ON
¡
Turn the key in the ignition until
the accessory indicator lights.
Preparation
3
Power On / Off
Power on : Press
Power off : Press again and hold
PWR SOURCE
¡When you use this unit for the first
time, a demonstration message
appears on the display.
OPEN
REMOTE
OPEN
Human
Equalizer
DISP
: Press to cancel this display
CQ-VX2200
REVERSE
SEL
S·A
PWR
SOURCE
S·ANALYZER
VOLUME 20
FM■ DISC
: Press and hold for more than
1 second when turning
power on to display a
demonstration message
again
D·M
SOURCE
AM45DISC
AUTO·P MUTE
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
DISP
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
Volume
VOLUME 20
: Press
Setting Range : 0 to 40
¡The sound level for each source is stored in memory.
(For radio, one volume setting for AM, one volume
setting for all FMs.)
Display Change
DISP
Example: CD Mode
When Power is Off
: Press
Track number/Track playing time
Clock display
8:15
CD 01 0’37
Press 2
times
Clock display
Display off
8:15
Dot Spectrum Analyzer display
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Mode Selection
Clock Setting
4
SOURCE
: Press to select
DISPLAY CLOCK
(When a CD is
(When a tape is
in the player.)
: Press and hold for
more than 2 seconds
in the player.)
DISP
TUNER
CD
TAPE
12:00
AUXILIARY
CHANGER
(When a changer with
a magazine loaded is
connected.)
(When AUX-IN
setting is ON.)
: Press to adjust hour
Note: Skipping “AUXILIARY” can be set. (a page 30)
8:00
: Press to move to
minute
8:00
Mute / ATT (Attenuator)
: Press to adjust minute
: Press
MUTE
(Press again to cancel)
Decreasing volume range depends on setting.
MUTE ON
8:15
(MUTE/ATT setting a page 30)
DISPLAY CLOCK
DISP
¡MUTE : No sound (Default)
¡ATT : Decrease the volume to 1/10 of previous level.
: Press to set
8:15
Notes:
¡If clock is not adjusted, “ADJUST” will be appear.
¡The 12-hour system is used for the clock.
¡The clock is not adjustable when power is off.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Radio Basics
OPEN
REMOTE
Human
Equalizer
CQ-VX2200
REVERSE
5
SEL
S·A
PWR
SOURCE
Mode Selection
ST
S·ANALYZER
FM1-1 87.50
FM■ DISC
D·M
AM45DISC
SOURCE
: Press to select the radio
mode
AUTO·P MUTE
LOC
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DISP
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
Band
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
: Press to select an FM
band
FM3
FM1
FM2
: Press to determine the
AM band
AM
BAND
Note: Press
when using the remote
control
FM1
FM2 FM3 AM
Tuning
: Higher frequency
: Lower frequency
Frequency
Band
Preset Number
FM Stereo Indicator
lights while FM stereo
broadcast is received.
Press and hold for more than 0.5 seconds
then release.
Seeking will start.
ST
Mono / Local selection
FM1-1 87.50
MONO: Reduce noise during a weak FM broadcast.
LOCAL: Searching stops at a strong signal only.
SEL
q
w
:Press and hold for more than 2 seconds.
:Press to select MONO/LOCAL
SEL
LOC
e
:Press to change the display as follows.
MONO OFF/LOCAL OFF
When in Radio Mode
LOCAL Indicator
lights while in LOCAL
mode.
MONO ON/LOCAL OFF
MONO ON/LOCAL ON
MONO OFF/LOCAL ON
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Preset Station Setting
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
6
Select a band and frequency (step q, w and e on the
previous page)
Manual
Preset
6
1
to
: Press and hold for more than 2 seconds
Memory
¡The display blinks once, and a
receiving station is saved in
the memory.
Manually save a station
in the preset memory.
FM1-1 87.50
Blinks once
Select a band (step q and w on the previous page)
AUTO·P
MUTE
: Press and hold for more than 2 seconds
¡The 6 strongest available stations will be automatically saved
in the memory under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially scanned for 5
seconds each.
Auto Preset
Memory
Automatically save
strong stations in the
preset memory.
1
6
to
:Press to select the station.
FM1-2 102.70
Blinks
Note: New stations are overwritten on existing saved stations after following this procedure.
Preset
Select a band (step q and w on the previous page)
Station
1
6
to
:Press to select the station.
Calling
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
CD Player Basics
OPEN
REMOTE
Human
Equalizer
Disc Insert / Eject
CQ-VX2200
REVERSE
7
SEL
S·A
If
lights, a CD has been already loaded.
PWR
SOURCE
S·ANALYZER
CD 01 0’37
FM■ DISC
OPEN
: Press to open the panel
D·M
AM45DISC
REP
¡Insert the disc and playback will start.
R
SCAN
Close the front panel manually.
AUTO·P MUTE
MTL
Caution: Only 12 cm CD is available for this unit.
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DISP
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
Label Side
CD u(Eject) Button
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
VX2200
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
T
EJEC
CD
MD
EJECT
IN
D
M
u
RESET
Notes:
¡Loading a CD when the power is off allows the
power to be turned on.
¡Ejecting the CD when the unit is in the CD mode
allows the power to be turned off.
When a CD is in the player
Mode Selection
SOURCE
: Press to select the CD
mode
Track Selection
: Next track
Track Number
Play Time
: Beginning of the current track/
Previous track (Press twice)
Fast Forward / Reverse
Press and hold
CD 01 0’37
: Fast forward
: Fast reverse
REP
R
SCAN
¡Release to resume the regular CD play.
MTL
Cautions:
¡Do not use irregularly shaped CDs.
¡To avoid damaging the front panel, do not push it
down or place objects on it while it is open.
¡Do not pinch your finger or hand in the front
panel. Do not insert foreign matter into the disc
and cassette tape slots.
When a CD is inside
(Blinks during CD play)
Repeat, Random and
Scan Indicator
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Various Way of Listening
8
All the available tracks are played in random sequence.
RANDOM : Press
5
Lights
R
Random Play
Scan Play
(Press again to cancel)
The first 10 seconds of each track play in sequence.
Lights
SCAN
SCAN
5
: Press
¡After playing 10 seconds of all
tracks, the scan play is finished and
the starting position goes to the
beginning of the first played track.
(Press again to cancel)
Repeat the current selection.
REPEAT
6
: Press
Lights
REP
Repeat Play
(Press again to cancel)
Notes on CD-R Disc
A playable CD-R disc is only a CD-R disc on which sound was recorded.
¡Some recorded CD-R discs by using CD recorder are not playable because of their characteristic, or scratches or dirt on
the discs.
¡You can not play a CD-R disc that has not been finalized.
¡A CD-RW disc is not playable.
¡MP3 file, video CD, CD-ROM and CD-EX disc are not playable.
¡Be sure to observe the handling instructions of CD-R disc.
¡Do not apply a disc that has a label printed by a commercially available label printer.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
Cassette Tape Player Basics
S
H
OPEN
REMOTE
Human
Tape Insert / Eject
Equalizer
CQ-VX2200
REVERSE
9
SEL
S·A
PWR
SOURCE
If
lights, a tape has been already loaded.
SKIP
S·ANALYZER
D·M
B
NR
FM■ DISC
OPEN
: Press to open the panel
AM45DISC
REP
TPS
¡Insert the tape and playback will start.
AUTO·P MUTE
Close the front panel manually.
MTL
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
Exposed side
DISPLAY CLOCK
DSP SPACE
CD IN
RANDOM
SCAN
5
REPEAT
6
DISP
SPACE
1
2
3
4
VX2200
CD EJECT
MTL
B
NR
TPS
SKIP
REPEAT
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
CT
JE
E
D
M
MD IN
u
RESET
Tape u(Eject) Button
Notes:
¡Loading a tape when the power is off allows the
power to be turned on.
¡Ejecting the tape when the unit is in the Cassette
tape mode allows the power to be turned off.
When a Cassette tape is in the player
Mode Selection
SOURCE
: Press to select the cas-
sette tape mode
Play Side Change
: Press to reverse
PRG/
BAND
(Press
for remote control)
Fast Forward / Rewind
: Fast Forward
Playside (s: Top side, t: Bottom side)
When a Cassette tape is inside
Dolby B NR Indicator
(Blinks during Cassette tape play)
: Rewind
Skip Indicator
: Press to resume the tape play
PRG/
BAND
(Press
for remote control)
SKIP
B NR
Cautions:
REP
TPS
¡To avoid damaging the front panel, do not push it
down or place objects on it while it is open.
¡Do not pinch your finger or hand in the front
panel. Do not insert foreign matter into the disc
and cassette tape slots.
MTL
TPS Indicator
Metal Tape Indicator
Repeat Indicator
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
When playing metal or chromium dioxide (CrO2) tapes.
1
: Press
MTL
10
Lights
MTL
Metal Tape
Mode
(Press again to cancel)
¡When playing non-metal tape, please set this function off.
Set the Dolby B NR mode when playing back a tape recorded with Dolby B Noise
Reduction.
Dolby B Noise
Reduction
2
: Press
(Press again to cancel)
B NR
Lights
B NR
4
: Press
TPS
Lights
TPS
(Press again to cancel)
¡Activates the tape rewind and goes back to the beginning of the
current program. The TPS finds the beginning of a following
program correspondent to how many times you press this but-
ton. (Up to 8 programs)
Tape Program
Search (TPS)
Operation
¡Activates the tape fast forward and goes to the beginning of
the next program. The TPS finds the beginning of a following
program correspondent to how many times you press this
button. (Up to 9 programs)
* Press
to cancel rewind or fast forward.
PRG/
BAND
(Press
for remote control)
Notes:
The TPS mode may not work correctly in the following cases.
¡There is an interval less than 4 seconds or having a high level of noise or hum
between programs.
¡There is particularly low-level passage during the program.
Skip unrecorded portions longer than 15 seconds on the tape.
SCAN
5
: Press
Lights
Blank Skip
SKIP
(Press again to cancel)
Note: The blank skip does not work when an unrecorded portion of a tape is
less than 15 seconds.
Repeat the current program.
REPEAT
6
Repeat Play
: Press
Lights
REP
(Press again to cancel)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
CD Changer Control
Connect the CD changer, and load a
magazine. (a page 38)
OPEN
REMOTE
Preparation
Human
Equalizer
CQ-VX2200
REVERSE
11
SEL
S·A
PWR
SOURCE
S·ANALYZER
01-01 1’06
Notes:
FM■ DISC
D·M
¡Loading a magazine when the power is off allows
the power to be turned on.
DISC
REP
AM45DISC
R
SCAN
AUTO·P MUTE
¡Ejecting the magazine when the unit is in the CD
Changer Mode allows the power to be turned off.
MTL
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DISP
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
Mode Selection
SOURCE
: Press to select the CD
changer mode
¡Insert the disc when "NO DISC" appears.
Disc Selection
: Next disc
: Previous disc
Track Selection
: Next track
: Beginning of the current track/
Previous track (Press twice)
Fast Forward / Reverse
Press and hold
: Fast forward
: Fast reverse
Disc Number
Track Number
Play Time
01-01 1’06
¡Release to resume the regular CD play.
DISC
REP
R
SCAN
MTL
Repeat (Disc),
Random (Disc) and
Scan (Disc) Indicator
When a CD Changer with a magazine
loaded is connected.
(Blinks during CD Changer play)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Various Way of Listening
12
All the available tracks on all discs in the magazine are played in a random
sequence.
RANDOM
All Tracks
4
: Press
Lights
R
(Press again to cancel)
Random
Play
All the available tracks on current disc are played in a
random sequence.
Lights
Lights
DISC
RANDOM
Current
Disc
4
:
Press and hold for more than 2 seconds
(Press and hold again to cancel)
R
The first 10 seconds of each track on the discs plays in sequence.
SCAN
5
: Press
Lights
All Tracks
SCAN
(Press again to cancel)
¡With the scanning of all tracks over, the original
program starts playing from the beginning.
Scan
Play
The first track of all the discs in the magazine is played for 10 seconds each.
SCAN
5
First
:
Press and hold for more than 2 seconds
Lights
Lights
DISC
(Press and hold again to cancel)
Track on
All Discs
¡With the scanning of all tracks over, the original
disc starts playing from the beginning.
SCAN
Repeat the current track selection.
REPEAT
Current
Track
6
: Press
Lights
REP
(Press again to cancel)
Repeat
Play
Repeat the current disc selection.
Lights
Lights
DISC
REP
REPEAT
Current
Disc
6
:
Press and hold for more than 2 seconds
(Press and hold again to cancel)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Sound Space and Useful Functions
OPEN
REMOTE
Human
Equalizer
CQ-VX2200
REVERSE
SEL
S·A
PWR
SOURCE
S·ANALYZER
D·M
13
SPACE
Sound Space
Reproduction
LIVE HOUSE
FM■ DISC
DISC
REP
(SPACE)
AM45DISC
R
SCAN
AUTO·P MUTE
MTL
LOC
Sound space can be made in a car like
being in a concert hall.
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DSP SPACE
Default : .SPACE OFF
RANDOM
SCAN
5
REPEAT
6
DISP
SPACE
1
2
3
4
Setting range : 8 types
MTL
B
NR
TPS
SKIP
REPEAT
(including SPACE OFF)
Sound space is available for each mode
(AM, FM, CD, Cassette Tape, CD Changer,
AUX-IN and Direct Memory).
D•M
SOURCE
SPACE
}{
DISP
Direct Memory
Your favorite FM/AM radio station can be
memorized in the D·M button and you can
call back radio stations just by pressing
the button whatever the current sound
source is, even if the power is off.
Default : FM 88.1 MHz
External Sound
Source
(AUX IN)
Preparations :
Connect an external device to AUX input
terminal. (a page 38)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
14
SPACE
Example:
: Press to change as follows
SPACE
LIVE HOUSE
SPACE OFF
CINEMA
LIVE HOUSE
CONCERT HALL
JAZZ CLUB
STADIUM
DISC
REP
R
SCAN
MTL
LOC
VOCAL
DISCO
After setting, "SPACE" indicator will illuminate.
¡
Space Indicator
❏ Recalling the Direct Memory
D·M
: Press
(Press again to cancel)
D·M 88.10
The direct memoried station is received.
¡
❏ Memorize
Select the station in Radio mode
(a page 14)
D·M MEMORY
D·M
: Press and hold for more
than 2 seconds
New station is overwritten on existing saved station.
¡
SOURCE
<<AUX IN>>
: Press to change to AUX IN mode
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Sound Space and Useful Functions
(continued)
OPEN
REMOTE
Human
Equalizer
CQ-VX2200
REVERSE
SEL
S·A
PWR
SOURCE
15
S·ANALYZER
D·M
FM■ DISC
WAVE
DISC
REP
AM45DISC
Spectrum Analyzer
Display Pattern
R
SCAN
AUTO·P MUTE
TPS
MTL
LOC
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DSP SPACE
Default : WAVE
RANDOM
SCAN
5
REPEAT
6
DISP
SPACE
1
2
3
4
Variety : 13 types (including BLANK
SPEANA and ALL DISP OFF.)
MTL
B
NR
TPS
SKIP
REPEAT
SEL
}{
S•A
[ d ] s
Spectrum Analyzer Display Pattern
S·A
: Press to change as follows
WAVE
AURORA
MILKY WAY
TWINKLE STAR
SUN
Spectrum Analyzer
Arrangement
SPC SARGASSO
BIG BANG
Default : NORMAL / POSI
Variety : 8 types (except for BLANK
SPEANA and ALL DISP OFF.)
FLARE
PROMINENCE
METEOR
SPACE FEVER
BLFANK SPEANA
ALL DISP OFF
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
S·A
: Press to change
16
Example:
There are special functions in Spectrum Analyzer Display Pattern.
BLANK SPEANA
WAVE
¡
DISC
REP
In this display, only the spectrum analyzer is turned off.
R
SCAN
TPS
LOC
ALL DISP OFF
¡
MTL
The whole display, including the lights, goes out.
(When some operation is performed, the display lights
for about 5 seconds.)
REVERSE
S·A
: Press and hold for more than 2 seconds
Arrange the Spectrum Analyzer Display using these methods.
❏ Direction Change
: Press to change as follows
Example:
: Regular Spectrum Analyzer display
: Regular display is reversed vertically
: REVERSE 1 display is reversed horizontally
: REVERSE 2 display is reversed vertically
NORMAL
REVERSE 1
REVERSE 2
REVERSE 3
❏ Positive - Negative Switch
: Press to change as follows
SPEANA POSI (Positive)
SPEANA NEGA (Negative)
Notes:
¡If no operation is performed within 10 seconds, the display will return to the normal operation mode.
¡The indication pattern can not be changed at letter indicating part of the display.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Sound Setting
SEL
DISP
OPEN
REMOTE
Human
Equalizer
Select the Item
CQ-VX2200
REVERSE
17
SEL
S·A
PWR
SOURCE
S·ANALYZER
EQ
HUMAN EQ
FM■ DISC
SEL
: Press to select
D·M
DISC
AM45DISC
REP
R
SCAN
AUTO·P MUTE
TPS
MTL
LOC
Regular Mode
HUMAN EQ
GRAPHIC EQ
BAL // FAD
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
SDBB SELECT
SUPER BASS
DISP
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
POSITION SEL
}{
[d ]s
Tone Quality
(Human Equalizer/HEQ)
Select
There are 49 ready patterns to make
presetting easier.
HUMAN EQ
Default : FLAT
Setting range : 0 - 3 for each patterns
(49 patterns)
Save Your Tone Quality
Preference
(Graphic Equalizer/GEQ)
Select
You can adjust the level from bass to treble
in each of 7 frequency bands. Up to 6 tone
quality preferences can be saved in memory.
GRAPHIC EQ
Default : 0 dB for each frequency
Setting range : –12 to +12 in 2 dB step
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Notes:
Set
¡If no keys have been pressed for more than
10 seconds, the display returns to the normal
operation mode.
18
¡To return to the normal operation mode.
and
: Press to select and adjust
DISP
: Press
Positioning Image
: Heavy bass
: Light bass
: Sharp treble
: Soft treble
• Recreation
• Enjoyable drive
• Stress relieving
• Refresh
Heavy
• Listen to the music
HEAVY
EQ
SOFT1 HEAVY1
DISC
Sharp
Soft
REP
R
SOFT
SHARP
SCAN
TPS
MTL
LOC
LIGHT
• Safe drive
• Calm down
• Rhythmical
• Awakening
Light
¡A cursor moves in the HEQ display and blinks at the
• Concentration
adjusted point.
❏ Adjustment
❏ Memorize (GEQ Preset Memory)
Adjust the level for each frequency
GEQ Preset Number
1
6
to
: Press and hold for
more than 2
EQ
GEQ-1 1.6kHz
DISC
REP
R
SCAN
¡The display blinks once, and a adjusted levels
TPS
MTL
Level
(dB)
are saved in the memory.
LOC
80 160 320 640 1.6
k
4 k 10 k
Frequency (Hz)
❏ Calling Back the Preset Tone Quality
After changing to the GEQ adjusting display
¡Frequency changes as follows.
1
6
80
160
320
640
1.6 k
4 k
10 k (Hz)
to
: Press
¡Selected frequency blinks.
¡After adjusting, EQ indicator will illuminate.
Note: New levels are overwritten on existing saved
level after following this procedure.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Sound Setting
(continued)
SEL
DISP
OPEN
REMOTE
Human
Equalizer
Select the Item
CQ-VX2200
REVERSE
19
SEL
S·A
PWR
SOURCE
S·ANALYZER
EQ
FM■ DISC
SEL
: Press to select
D·M
DISC
REP
AM45DISC
R
SCAN
AUTO·P MUTE
TPS
MTL
LOC
Regular Mode
HUMAN EQ
GRAPHIC EQ
BAL // FAD
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
DISPLAY CLOCK
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
SDBB SELECT
SUPER BASS
DISP
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
POSITION SEL
}{
[d ]s
Balance and Fader
Select
BAL//FAD
Default : Center
Setting range : 15 levels each
Sound Image
(Position)
Select
Select
You can adjust the sound image in accor-
dance with a listener's position.
POSITION SEL
Default : OFF
Rear Speakers as Sub-Woofers
(Super Base Control Sub-Woofer/SBC-SW)
You can utilize the rear speaker connected
to the built-in amplifier as Sub-Woofers
that outputs only bass.
SUPER BASS
Default : OFF
Bass Enhancement
(Super Dynamic Bass Boost/SDBB)
Select
The bass of the 4 speakers connected to
the built-in amplifier is enhanced, so that
you can enjoy heavy bass sound.
SDBB SELECT
Default : OFF
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Notes:
¡If no keys have been pressed for more than
10 seconds, the display returns to the normal
operation mode.
Set
20
¡To return to the normal operation mode.
and
: Press to select and adjust
DISP
: Press
❏ Balance
❏ Fader
: Right enhanced
: Front enhanced
B:R 2 F:R 1
Selected side arrow
: Rear enhanced
: Left enhanced
Example:
: All seats
: Front right
: Front left
OFF
RIGHT
LEFT
POSI FRONT
¡After setting, POSI indicator
will illuminate.
: Front
: Rear
FRONT
REAR
: Regular output (stereo)
OFF
Bass Enhancement (monaural)
¡Adjust the Sub-Woofer output level. It is also interlocked with the preout (rear speaker output).
¡BAL/FAD, POSI, SDBB and SPACE settings for rear speaker output will be invalid.
FLAT
100 Hz
150 Hz
200 Hz
(Does not cut the treble)
Note: Set to FLAT when using the cutoff frequency adjustment function built in an optional amplifier.
: Normal output
: Variable, low
: Variable, high
OFF
Example:
: Fixed, low
: Fixed, high
TYPE 1
TYPE 2
TYPE 3
TYPE 4
SDBB TYPE4
¡After setting, SDBB indicator
dB
12
will illuminate.
8
TYPE1(Variable: low)
TYPE2(Variable: high)
TYPE3(Fixed: low)
TYPE4(Fixed: high)
¡Variable : Bass enhancement along with the volume
¡Fixed : Bass enhancement with fixed range
OFF
0
300Hz
Frequency
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Other Setting
SEL
DISP
OPEN
REMOTE
Human
Equalizer
Select the Item
CQ-VX2200
REVERSE
21
SEL
S·A
PWR
SOURCE
S·ANALYZER
EQ
SPEANA FAST
FM■ DISC
SEL
: Press and hold for more
D·M
DISC
than 2 seconds and then
press again
AM45DISC
REP
R
SCAN
AUTO·P MUTE
TPS
MTL
(C) (a page 31)
LOC
TUNE
TRACK
INTEGRATED CD/CASSETTE RECEIVER WITH DSP
VOL
TITLE SCROLL
MUTE KEY SEL
AUX IN SET
SPEANA SPEED
DIMMER SEL
DISPLAY CLOCK
DSP SPACE
RANDOM
SCAN
5
REPEAT
6
DISP
SPACE
1
2
3
4
MTL
B
NR
TPS
SKIP
REPEAT
MONO/LOC
(a page 14)
}{
MUTE
[d ]s
Spectrum Analyzer
Speed
Select
Select
SPEANA SPEED
Default : SPEANA FAST
Dimmer
DIMMER SEL
Default : MID (When side-marker lamp is on)
HIGH (When side-marker lamp is off)
Excluding AUX-IN from
Source Selection
Select
Select
AUX IN SET
Default : ON
Mute/ATT (Attenuator)
MUTE
Decreasing range by pressing
can be selected.
button
MUTE KEY SEL
Default : Mute
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Notes:
¡If no keys have been pressed for more than
10 seconds, the display returns to the normal
operation mode.
Set
22
¡To return to the normal operation mode.
and
: Press to select and adjust
DISP
: Press
(C): The Title scroll function is designed for an MD changer (in future use).
Example:
: Faster
FAST
SPEANA FAST
: Slower
SLOW
LOW
Darker
MID
Medium
HIGH
Brighter
Example:
DIMMER MID
¡Display brightness with the side-marker lamps on or off can be set.
Note: Be sure to connect the illumination lead. (a page 36)
Example:
: External input (AUX-IN) is selectable as a source.
: External input (AUX-IN) is not selectable as a source.
ON
AUX IN ON
OFF
Example:
: No sound
MUTE
ATT
MUTE KEY
: Decrease to 1/10
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Installation Guide
WARNING
23
This installation information is designed for experienced installers
and is not intended for non-technical individuals. It does not contain
warnings or cautions of potential dangers involved in attempting to
install this product.
Any attempt to install this product in a motor car by anyone other
than qualified installer could cause damage to the electrical system
and could result in serious personal injury or death.
❏ Overview
❏ Installation Hardware
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps: (Please refer to the “WARN-
ING” statement above).
No.
q
Item
Q'ty
4
φ ×
Binding-Head Screws (5 mm
8 mm)
φ ×
Flat-Head Screws (5 mm
8 mm)
8
w
❏ Required Tools
You’ll need a screwdriver, a 1.5 volt AA battery, and
the following:
¡Identify and label the car wires.
¡Connect the car wires to the wires of the power
connector.
¡Install the unit in the dashboard.
¡Check the operation of the unit.
12 V DC
Test Bulb
Electrical
Tape
Side-Cut
Pliers
If you encounter problems, please consult your
nearest professional installer.
Caution: This unit operates with a 12 volt DC nega-
tive ground auto battery system only. Do not attempt
to use it in any other system. Doing so could cause
serious damage.
❏ Dashboard Specifications
THICKNESS
MIN. 4.75 mm
MAX. 5.56 mm
Before you begin installation, look for the items on
the right which are packed with your unit.
103 mm
¡Installation Hardware …… Needed for in-dash
installation
182mm
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
If your car has a radio or is pre-wired for one:
With the ignition and headlights off, identify the car
battery lead by grounding one lead of the test bulb
to the chassis and checking the remaining exposed
wires from the cut radio connector plug.
S
H
❏ Identify All Leads
The first step in installation is to identify all the car
wires you’ll use when hooking up your sound sys-
tem.
24
As you identify each wire, we suggest that you label
it using masking tape and a permanent marker. This
will help avoid confusion when making connections
later.
If your car is not wired for an audio unit :
Go to the fuse block and find the fuse port for the
battery, usually marked BAT.
Speakers
Note: Do not connect the power connector to the
stereo unit until you have made all connections. If
there are no plastic caps on the stereo hooking
wires, insulate all exposed leads with electrical tape
until you are ready to use them. Identify the leads in
the following order.
Identify the car speaker leads. There will be two
leads for each speaker, usually color coded.
A handy way to identify the speaker leads and the
speaker they connect with is to test the leads using
a 1.5 volt AA battery as follows.
Hold one lead against one pole of the battery and
stroke the other lead across the other pole. You will
hear a scraping sound in a speaker if you are hold-
ing a speaker lead.
If not, keep testing different lead combinations until
you have located all the speaker leads. When you
label them, include the speaker location for each.
Power Lead
If your car has a radio or is pre-wired for one :
Cut the connector wires one at a time from the plug
(leaving the leads as long as possible) so that you
can work with individual leads.
Antenna Motor
If your car is equipped with an automatic power
antenna, identify the car motor antenna lead by con-
necting one bulb tester lead to the car battery lead
and touching the remaining exposed wires from the
cut radio connector plug one at a time. You will hear
the antenna motor activate when you touch the cor-
rect wire.
Turn the ignition on to the accessory position, and
ground one lead of the test bulb to the chassis.
Touch the other lead of the test bulb to each of the
exposed wires from the cut radio connector plug.
Touch one wire at a time until you find the outlet that
causes the test bulb to light.
Antenna
The antenna lead is a thick, black wire with a metal
plug at the end.
Now turn the ignition off and then on. If the bulb also
turns off and on, that outlet is the car power lead.
If your car is not wired for an audio unit :
Go to the fuse block and find the fuse port for radio
(RADIO), accessory (ACC), or ignition (IGN).
Battery Lead
If your stereo unit has a yellow lead, you will need to
locate the car's battery lead. Otherwise you may
ignore this procedure. (The yellow battery lead pro-
vides continuous power to maintain a clock, memory
storage, or other function.)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
Installation Guide
(continued)
Antenna
S ❏ Connect All Leads
Connect the antenna by plugging the antenna lead
into the antenna receptacle.
H
Now that you have identified all the wires in the car,
you're ready to begin connecting them to the stereo
25
unit wires. The connection diagram (a Page 36 to
38) shows the proper connections and color coding
of the leads.
We strongly recommend that you test the unit
before making a final installation.
You can set the unit on the floor and make tempo-
rary connections to test the unit. Use electrical tape
to cover all exposed wires.
Equipment
Connect any optional equipment such as an amplifi-
er, according to the instructions furnished with the
equipment. Leave about 30 cm of distance between
the speaker cords/amplifier unit and the antenna/
antenna extension cord. Read the operating and
installation instructions of any equipment you will
connect to this unit.
Important: Connect the red power lead last, after
you have made and insulated all other connections.
Power
Connect the red power lead to the correct car radio
wire or to the appropriate fuse port on the fuse
block.
Ground
If the stereo unit functions properly with all these
connections made, disconnect the wires and pro-
ceed to the final installation.
Connect the black ground lead of the power connec-
tor to the metal car chassis.
Speakers
Illumination
Connect the speaker wires. See the wiring diagram
below for the proper hookups. Follow the diagram
carefully to avoid damaging the speakers and the
stereo unit.
The speaker used must be able to handle more than
41 W of audio power. If using an optional audio
power, the speakers should be able to handle the
maximum amplifier output power. Speakers with
low input ratings can be damaged.
1.Connect to light switch, the control button are illu-
minated.
2.Can not find the light switch, connect the illumina-
tion lead (orange with white stripe) to accessory
(ACC).
❏ Final Installation
Lead Connections
Connect all wires, making sure that each connection
is insulated and secure. Bundle all loose wires and
fasten them with tape so they won't fall down later.
Speaker impedance should measure 4 - 8 Ω, which
is typically marked on most speakers. Lower or
higher impedance speakers will affect output and
can cause both speaker and stereo unit damage.
Congratulations! After making a few final checks,
you’re ready to enjoy your new auto stereo system.
CAUTION : Never ground the speaker cords. For
example, do not use a chassis ground system or a
three-wire speaker common system. Each speaker
must be connected separately using parallel insulat-
ed wires. If in doubt about how your car's speakers
are wired, please consult with your nearest profes-
sional installer.
Connect the power cord after completion of other
connections to prevent shortings.
❏ Final Checks
1. Make sure that all wires are properly connect-
ed and insulated.
Motor Antenna
Connect the car motor antenna lead to the blue
motor antenna relay control lead.
2. Turn on the ignition to check the unit for prop-
er operation.
If you have difficulties, consult your nearest autho-
rized professional installer for assistance.
Battery
Connect the yellow battery lead to the correct radio
wire or to the battery fuse port on the fuse block.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
❏ Precautions
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
26
Transportation Bracket x 2
Screw with washer
Transportation bracket removal
φ ×
(5 mm
8 mm) x 4
Be sure to remove the bracket for transportation
before use (installation).
CUse screws (5 mm φ x 8 mm) with washers for
installation.
Be careful not to lose any of these parts.
CQ-VX2200W
Note:
¡The screw holes on the right side are not tapped. Please only use screws provided to mount the unit.
¡To tighten the screws, press its head down straight forward.
❏ Typical Installation (For vehicle with double-DIN size)
1. Remove Car radio or little object box from the vehicle and the stopping brackets.
2. Use the appended screws q or w to install the brackets on this unit.
3. Install this unit into the vehicle.
Appended Screws (q or w).
Note: Use a pench to bend the
Bracket (R)
Select appropriate ones matching
the hole shape of the bracket.
fingers on the bracket vertically.
Bracket (L)
q Binding-Head
Sdrew x 8
(5 mmφ x 8 mm)
w Flat-Head
Screw x 8
(5 mmφ x 8 mm)
CQ-VX2200W
Note: Binding-Head screws (5 mmφ
x 8) q are appended four pieces, the
other four pieces are fixed on the
transportation bracket. [Screw with
washer (5 mmφ x 8 mm)]
¡If a special kit (option) is necessary for a certain year’s, model or grade of
vehicle, please consult your dealer.
¡For electrical connecting simply to your vehicle, you can buy a prepared
power connector from your dealer.
❏ Installation for except for the above motors
For general use kit (option) or motor’s special kit (option), Please consult your dealer.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Electrical Connections
❏ Wiring Diagram
27
CD/Cassette Receiver
CQ-VX2200W
Power Connector
Front Speaker Lead
Antenna Control Cord
To the auto antenna control power
(Blue)
cord of the car (Max. 0.1 A)
Illumination Lead
To the power line connected to
the side marker lights of the car
(Orange / white stripe)
(Blue / white stripe)
Rear Speaker Lead
External Amplifier Control Power Lead
To an external amplifier (Max. 0.1 A)
Resistor 1 kΩ
ACC Power Lead
(Red)
To ACC power, +12V DC
Fuse (10A)
Battery Lead
(Yellow)
To the car battery, continuous
+12V DC
Ground Lead
(Black)
To a clean, bare metallic part of
the car chassis
Note: If your car does not have a power line connected to the side marker lights of the car, leave the illumination lead disconnected.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Cautions:
¡This product is designed to operate off a 12 V DC, negative ground battery system.
¡To prevent damage to the unit, be sure to follow the connection diagram below.
¡Remove approx. 5 mm of protective covering from the ends of the leads before connecting.
¡Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and keep
cable terminals free from touching any metal parts.
28
¡Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased when
the battery terminals are disconnected.
¡Connect the power cord after completion of other connections to prevent shortings.
(White)
!
(Left)
(White / black stripe)
@
Front Speaker
(Gray)
!
@
(Right)
(Gray / black stripe)
(Green)
(Green / black stripe)
(Violet)
!
(Left)
@
!
Rear Speaker
(Violet / black stripe)
(Right)
@
CD Changer Input
Connector
CD Changer Control
Connector
(Red) : Audio (Right)
(White) : Audio (Left)
Power Connecter
Antenna Terminal
Pre-out Connecter (FRONT)
Pre-out Connecter (REAR)
AUX-IN Connector
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Electrical Connections
(continued)
System Upgrade Example
Combination
¡CD changer (CX-DP88N)
¡A car TV
29
¡8 Speakers
CD Changer
CX-DP88N
Extension Cord
(DIN/RCA/BATT/GND)
Ground lead
Battery Lead
(Red) (R)
.
CD C IN
Antenna
(Yellow)
Fuse (3A)
(White) (L)
(Red) (R)
CD Changer Connector
RCA Cord
(Option)
(White)(L)
to AUX
Power Connector
(White)
(L)
(Red)
(R)
CQ-VX2200W (Rear)
REAR
FRONT
(White)
(L)
(White)
(L)
(Red)
(R)
(Red)
(R)
(White)
(L)
(Red)
(R)
Car TV etc.
!
Front Speaker
Lead
(Left)
@
!
Front
Speaker
(Right)
@
RCA Cord
(Option)
RCA Cord
(Option)
!
Rear Speaker
Lead
(Left)
Rear
@
!
Speaker
(Red)
(R)
(White)
(L)
(White)
(L)
(Red)
(R)
(Right)
@
Power
Amplifire
Power
Amplifire
Speakers for
system up grade
Speakers for
system up grade
38
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Troubleshooting
Preliminary Steps
Cautions:
¡Do not use the unit if it malfunctions or
Check and take steps as described in the tables below.
something is wrong.
30
¡Do not use the unit in abnormal conditions,
for example, without sound, or if it emits
smoke or a foul smell, which can cause
ignition or electric shock. Immediately stop
using the unit and call the store where you
purchased it.
If You Suspect Something Wrong
Immediately switch power off.
Disconnect the power connector and check that there is neither
smoke nor heat from the unit before asking for repairs. Never try to
repair the unit yourself because it is dangerous to do so.
■ Common
Trouble
Cause / Step
Car’s engine switch is not on.
aTurn your car’s ignition switch to ACC or ON.
Cables are not correctly connected.
aConnect cables correctly.
Battery cable is not correctly connected.
aConnect the battery cable to the terminal that is always live.
No power
Accessory cable is not correctly connected.
aConnect the accessory cable to your car's ACC source.
Grounding wire is not correctly connected.
aConnect the grounding wire to a metal part of the car.
Fuse is burnt.
a
Call the store where you purchased the unit, or your nearest Panasonic
Service Center and ask for fuse replacement.
Mute is set to ON.
aSet it to OFF.
Cables are not correctly connected.
No sound
Noise
aConnect cables correctly.
Condensation (dew)
aWait for a while before use.
A mobile phone is used near the unit.
aKeep the mobile phone away from the unit.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
Troubleshooting
■ Radio
(continued)
S
H
Trouble
Cause / Step
31
Station is too far, or signals are too weak.
aSelect other stations of higher signal level.
Much noise in FM
stereo and monaural
broadcasts
The radio antenna is not extended enough.
aExtend the radio antenna enough.
The motor antenna relay control lead is not connected correctly.
a
If there is a motor antenna in the car, connect the motor antenna relay control
lead to the motor antenna lead that is installed in the car correctly.
Battery cable is not correctly connected.
aConnect the battery cable to the terminal that is always live.
Preset station is reset.
■ CD
Trouble
Cause / Step
CD is upside down.
CD is in the CD com-
partment but no sound
is made, or CD is eject-
ed automatically.
aPlace CD in the correct direction with the label side up.
CD is dirty.
aClean CD, referring to the section on Notes on CD.
CD sound skips, tone
quality is low.
CD is dirty.
aClean CD, referring to the section on Notes on CD.
Mounting angle is over 30 degrees.
aAdjust mounting angle to less than 30 degrees.
Sound skip due to
vibration
Unstable mounting
aMount the unit securely with the mounting parts, referring to the section
on Installation.
¡CD is defective.
¡Mechanical trouble
aOpen the panel and press [u] (CD EJECT). If failure persists, press the
reset switch. If normal operation is not restored, call the store where you
purchased the unit or the nearest Panasonic Service Center to ask for
repairs.
CD is not ejected.
■ Cassette Tape
Trouble
Cause / Step
Blank tape is inserted in the unit.
aInsert recorded tape into the unit.
No sound
Heads are dirty.
aClean Heads. (Ask a service representative for advice.)
Tape sound quality is
poor.
Poor quality tape.
aUse better quality tape.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
■ Cassette Tape (continued)
Trouble
Cause / Step
32
Dolby B NR tape plays with Dolby B NR off.
aSet Dolby B NR to ON.
High tones are improp-
erly emphasized.
Metal type tape plays with normal mode.
aChange Normal mode to Metal mode.
Non-Dolby B NR tape plays with Dolby B NR on.
aSet Dolby B NR to OFF.
Reproduction of high
tones is poor.
Normal type tape plays with Metal mode.
aChange Metal mode to Normal mode.
Heads are magnetized.
aDemagnetize heads. (Ask a service representative for advice.)
Tape running mechanism is dirty or out of order.
aClean tape running mechanism, or repair it. (Ask a service representative
for advice.)
Wow and flutter is very
high.
■ Sound Setting
Trouble
Cause / Step
Left and right balance, or front and rear balance is off on one side.
aAdjust BAL//FAD as appropriate.
No sound from left,
right, front, or rear
speaker
Cables are not correctly connected.
aConnect the cables correctly.
Left and right sounds
are reversed in stereo
listening.
The right speaker wire is connected to the left speaker and the left speaker wire
to the right speaker.
aConnect the speaker wires to the correct one.
Only bass or monaural
sound from rear speaker
SBC-SW is set to ON.
aSet SBC-SW to OFF.
■ Remote Control
Trouble
Cause / Step
Battery poles (+) (–) are reversed.
aInsert the battery correctly.
Wrong battery.
aCheck the battery.
Buttons are invalid for
operation.
Battery has run down.
aReplace the battery.
Remote control is in the wrong direction.
aDirect the remote control at sensor (REMOTE) on the panel.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
Troubleshooting
Error Display Messages
■ CD
(continued)
S
H
33
Display
Cause / Step
Disc is dirty, or is upside down.
a Open the panel and press [u] (CD EJECT) button. Check disc.
CD – E1 –
Disc has scratches.
a Open the panel and press [u] (CD EJECT) button. Check disc.
CD – E2 –
No operation by some cause.
a Open the panel and press [u] (CD EJECT) button. If failure per-
sists, press the reset switch. If normal operation is not restored yet,
call the store where you purchased the unit or the nearest Panasonic
Service Center to ask for repairs.
CD – E3 –
Action was taken to start playing before disc is fully ejected.
a Open the panel and press [u] (CD EJECT) button.
PLS EJECT
■ Cassette Tape
Display
Cause / Step
No operation by some cause.
a Open the panel and press [u] (CST EJECT) button.
PLS EJECT
■ CD Changer
Display
Cause / Step
Disc is dirty, or is upside down.
a Select the next available compact disc. Check disc.
CD CH – E1 –
Disc has scratches.
a Select the next available compact disc. Check disc.
CD CH – E2 –
No operation by some cause.
a Eject the magazine. If failure persists, press the reset switch. If nor-
mal operation is not restored yet, call the store where you purchased
the unit or the nearest Panasonic Service Center to ask for repairs.
CD CH – E3 –
No disc in the changer (magazine)
a Insert discs into the changer (magazine).
NO DISC
42
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Maintenance
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry soft cloth for routine exterior
cleaning. Never use benzine, thinner or other solvents.
34
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Service Center. The product should be serviced only by a qualified technician.
Replacing the Fuse
Use fuses of the same specified rating (10 amps). Using different substitutes or fuses with a higher rating, or connecting
the product directly without a fuse, could cause fire or damage to this unit.
If the replacement fuse fails, contact your nearest Panasonic Service Center for service.
Reset Switch
Reset switch
Insert a hard, slender stick into the hole and push the switch.
The unit returns to the default state when the trouble is reset.
Remember, the data and settings stored in the memory are
CD IN
deleted.
u
CD EJECT
CST EJECT
Important
INTEGRATED CD/CASSETTE RECEIVER WITH
u
Push the switch only when the unit fails to operate with any but-
CST IN
tons.
If the unit fails to return to normal condition, call the nearest
RESET
Panasonic Service Center and ask for repairs.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
S
H
Maintenance
Care of the Unit
35
Cleaning this unit
Use a dry, soft cloth to wipe.
Caution on cleaning
Never use solvents such as benzine, thinner
as they may mar the surface of the unit.
Notes on CD
ONLY USE DISCS CARRYING THE LABEL
How to hold the CD
¡Do not touch the underside of the disc.
¡Do not make scratches on the disc.
¡Do not bend disc.
Label side
¡When not in use, keep CD in the case.
Do not use irregularly shaped CDs
Do not leave discs in the following places:
¡Direct sunlight
¡Near car heaters
¡Dirty, dusty and damp areas
¡Seats and dashboards
Disc Cleaning
Use a dry, soft cloth to wipe from the center
outward.
<Right>
<Wrong>
Caution on New Discs
A new disc may have rough edges on its inner and
outer perimeter. These may cause malfunction.
Rough edge
Remove the rough edges using a pencil, etc.
* Refer to page 17 as to CD-Rs.
Notes on Cassette Tape
Tape Slack:
Use a pencil or similar object to take up the
slack as shown. If a loose tape is used, this
may result in the tape becoming tangled in the
rotating parts of the unit.
Pencil
Exposed end
(Open end)
Do not touch or
pull out the tape.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
E
N
G
L
I
Specifications
General
Power Supply
S
H
: 12 V DC (11 V - 16 V), test voltage 14.4 V, negative ground
Current Consumption
Rated Output
: Less than 8.5 A (CD play mode)
: 16 W x 4 ch (1 kHz, 1%, 4 Ω)
: 41 W x 4 ch
36
Maximum Power Output
Suitable Speaker Impedance
Audio Input Impedance
Audio Input Voltage
Pre-out Output Voltage
Pre-out Output Impedance
Dimensions (W x H x D)
Weight
: 4 Ω
: 10 kΩ (AUX IN)
: 2 V (AUX IN)
: 2 V
: 600 Ω
: 178 x 100 x 160 mm
: 2.4 kg
DSP
Number of Channels
Space mode
: 2 input channels, 4 output channels
: 7 mode
Equalizer Center Frequency
Variable Range of Equalizer
: 80, 160, 320, 640, 1.6 k, 4 k, 10 k (Hz)
: –12 to +12 dB (13 steps)
FM Stereo Radio
Frequency Range
Usable Sensitivity
: 87.5 - 108 MHz
: 12 dBf.
Total harmonic distortion (mono)
Weighted S/N ratio (mono)
Frequency Response
Stereo Separation
: 0.3 % (1 kHz)
: 60 dB
: 20 Hz – 15 kHz ( 3 dB)
: 42 dB (at 1 kHz)
: 75 dB
Image response ratio
AM Radio
Frequency Range
Usable Sensitivity
Image response ratio
: 531 kHz - 1,602 kHz
: 27 dB/µV
: 65 dB
CD Player
Channel
: 2 channels
Quantization
: 16-bit liner
Frequency Response
Dynamic range
Wow and Flutter
: 5 Hz - 20 kHz
: 90 dB (IHF, A)
: Below measurable limits
Cassette Tape Player
Reproduction system
Tape Speed
Fast Forward Time
Rewind Time
: 4-track, 2-program stereo
: 4.76 cm/sec
: 100 sec (C-60)
: 100 sec (C-60)
Wow and Flutter
Signal/Noise Ratio
: 0.07 % (WRMS)
: Dolby B NR OFF 56 dB (IHF, A)
Dolby B NR ON 66 dB (IHF, A)
: 30 to 18,000 Hz (normal tape)
30 to 20,000 Hz (metal tape)
Frequency Response
Note : Specifications and the design are subject to modification without notice due to improvements in technology.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol B are trademarks of Dolby Laboratories Licensing Corporation.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-VX2200W
Matsushita Electric Industrial Co., Ltd.
Central P.O. Box 288, Osaka 542-8588, Japan
YFM284C367ZA
TAMACO1101-0
Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|