14-1239a.fm Page 1 Wednesday, August 25, 1999 4:00 PM
A
Cat. No. 14-1239
OWNER’S MANUAL
Please read before using this equipment.
®
STEREO MATE
SCR-96 AM FM Stereo
•
Cassette Recorder
with Tie-Clip Microphone
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 3 Wednesday, August 25, 1999 4:00 PM
Belt Clip — lets you attach the cassette recorder to
your belt for hands-free carrying when you are on the
go.
Automatic Level Control — automatically sets the
correct recording level.
Battery Check Indicators — show you the amount
of power remaining in the batteries.
Note: To listen to your cassette recorder in stereo,
you need a pair of headphones or amplified speakers
(not supplied) with a 1/8-inch mini-plug. Your local
RadioShack® store sells a wide variety of head-
phones and speakers.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 4 Wednesday, August 25, 1999 4:00 PM
CONTENTS
Preparation ........................................................... 5
Connecting to Power ....................................... 5
Using Battery Power ................................ 5
Using AC Power ....................................... 8
Using Vehicle Battery Power .................... 9
Connecting Headphones or Speakers .......... 11
Listening Safely ...................................... 11
Traffic Safety .......................................... 12
Using the Belt Clip ......................................... 12
Operation ............................................................ 13
Playing the Radio .......................................... 13
Loading a Cassette Tape .............................. 15
Playing a Cassette Tape ................................ 17
Using Fast Forward and Rewind ................... 21
Recording ...................................................... 22
Recording from the Radio ...................... 22
Recording Live ....................................... 24
Tape Tips ....................................................... 26
Preventing Accidental Erasure ............... 26
Erasing Tapes ........................................ 27
Restoring Tape Tension and Sound
Quality .................................................... 28
Care ..................................................................... 29
Cleaning the Tape-Handling Parts ................ 30
FCC Information ............................................ 31
Specifications ..................................................... 32
4
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 5 Wednesday, August 25, 1999 4:00 PM
PREPARATION
CONNECTING TO POWER
You can power your cassette recorder from:
• Internal batteries
• AC power (using an AC adapter)
• Your vehicle’s cigarette-lighter socket (using a
DC adapter)
Using Battery Power
To power the cassette recorder from internal batter-
ies, you need two AA batteries. For the best perfor-
mance and longest life, we recommend RadioShack
alkaline batteries.
You can also use rechargeable nickel-cadmium bat-
teries. These batteries and a battery charger are
available at your local RadioShack store.
Cautions:
• Use only fresh batteries of the required size and
recommended type.
• Do not mix old and new batteries, different types
of batteries (standard, alkaline, or recharge-
able), or rechargeable batteries of different
capacities.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 6 Wednesday, August 25, 1999 4:00 PM
Follow these steps to install batteries.
1. Open the battery compartment cover by press-
ing down and sliding it in the direction of the
arrow on the cover, then lifting open the cover.
Caution: The cover is hinged. Do not try to
remove it.
2. Put the batteries in the compartment as indi-
cated by the polarity symbols (+ and –) marked
outside the compartment.
3. Close the cover.
When you turn on the radio or play a tape, one of the
three indicators lights up to show the amount of pow-
er remaining in the batteries.
Remaining
Power
High
➜
Low
BATTERY
Indicators
Green ➜
F (full)
Orange ➜
M (medium)
Red
L (low)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 7 Wednesday, August 25, 1999 4:00 PM
When the red BATTERY indicator lights during oper-
ation, replace both batteries.
Warning: Dispose of old batteries promptly and
properly. Never burn or bury them.
Important: This product is capable of using re-
chargeable nickel-cadmium batteries. At the end of
the batteries’ useful life, they must be recycled or dis-
posed of properly. Contact your local, county, or
state hazardous waste management authorities for
information on recycling or disposal programs in your
area. Some options that might be available are: mu-
nicipal curbside collection, drop-off boxes at retailers,
such as your local RadioShack store, recycling col-
lection centers, and mail-back programs.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 8 Wednesday, August 25, 1999 4:00 PM
Using AC Power
You can power the cassette recorder using a 3V, 200
mA AC adapter and a size H Adaptaplug® (neither
supplied). Both are available at your local Ra-
dioShack store.
Cautions:
You must use a Class 2 power source
that supplies 3V DC and delivers at
least 200 mA. Its center tip must be
set to negative and its plug must fit the cassette
!
DC3V
recorder's
jack. Using an adapter that
does not meet these specifications could dam-
age the cassette recorder or the adapter.
• Always connect the AC adapter to the cassette
recorder before you connect it to AC power.
When you finish, disconnect the adapter from
AC power before you disconnect it from the cas-
sette recorder.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 9 Wednesday, August 25, 1999 4:00 PM
Follow these steps to connect the cassette recorder
to AC power.
1. Set the adapter’s voltage switch to 3V.
2. Insert the size H Adaptaplug into the adapter’s
cord, with the tip set to negative.
3. Insert the plug into the cassette recorder’s DC3V
jack.
4. Plug the adapter into a standard AC outlet.
Note: Connecting the AC adapter automatically dis-
connects internal batteries.
Using Vehicle Battery Power
You can power the cassette recorder from a vehicle’s
12V power source (such as cigarette-lighter socket)
using a 3V, 200 mA DC adapter and a size H
Adaptaplug® (neither supplied). Both are available at
your local RadioShack store.
Cautions:
You must use a power source that
supplies 3V DC and delivers at least
200 mA. Its center tip must be set to
negative and its plug must fit the cassette re-
!
DC3V
corder’s
jack. Using an adapter that does
9
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 10 Wednesday, August 25, 1999 4:00 PM
not meet these specifications could damage the
cassette recorder or the adapter.
• Always connect the DC adapter to the cassette
recorder before you connect it to the power
source. When you finish, disconnect the adapter
from the power source before you disconnect it
from the cassette recorder.
Follow these steps to power the cassette recorder
from your vehicle’s battery.
1. Set the adapter’s voltage switch to 3V.
2. Insert the size H Adaptaplug into the adapter’s
cord, with the tip set to negative.
3. Insert the plug into the cassette recorder’s DC3V
jack.
4. Plug the other end of the adapter into the vehi-
cle’s cigarette-lighter socket.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 11 Wednesday, August 25, 1999 4:00 PM
CONNECTING HEADPHONES OR
SPEAKERS
To listen in stereo, you need a pair of headphones or
1
amplified speakers with a /8-inch plug. Your local
RadioShack store carries a full line of headphones
and speakers. Insert the headphones’ or speakers’
plug into the cassette recorder’s
jack.
Listening Safely
To protect your hearing, follow these guidelines
when you use headphones.
• Set the volume to the lowest setting before you
begin listening. After you begin listening, adjust
the volume to a comfortable level.
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to per-
manent hearing loss.
• Once you set the volume, do not increase it.
Over time, your ears adapt to the volume level,
so a volume level that does not cause discomfort
might still damage your hearing.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 12 Wednesday, August 25, 1999 4:00 PM
Traffic Safety
Do not wear headphones while operating a motor ve-
hicle or riding a bicycle. This can create a traffic haz-
ard and can be illegal in some areas.
Even though some headphones are designed to let
you hear some outside sounds when listening at nor-
mal volume levels, they still can present a traffic haz-
ard.
USING THE BELT CLIP
The belt clip gives you hands-free carrying conve-
nience. Attach the clip to the cassette recorder with
the supplied screw and turn the screw in the direction
of the LOCK arrow.
To take off the clip, turn the screw in the direction of
the RELEASE arrow.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 13 Wednesday, August 25, 1999 4:00 PM
OPERATION
PLAYING THE RADIO
1. To hear monaural sound through the built-in
speaker, set E-BASS to SP ON.
Note: When you use the built-in speaker, you
cannot emphasize low frequencies with E-BASS.
To hear stereo sound through headphones or
amplified speakers, set E-BASS to OFF.
2. Slide TAPE/RADIO to RADIO. One of the BAT-
TERY indicators lights.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 14 Wednesday, August 25, 1999 4:00 PM
3. Slide BAND to the desired band. Slide it to FM
STEREO for stereo sound on FM stations.
Notes:
• The AM antenna is built-in. Move the cassette
recorder to improve AM reception.
• If you connect a pair of headphones or ampli-
fied speakers, fully uncoil the headphones’ or
speakers’ cord for the best FM reception.
• To improve reception for weak FM stereo sta-
tions, set BAND to FM MONO. The sound will
be monaural, but reception should improve.
4. Rotate TUNING to select a radio station.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 15 Wednesday, August 25, 1999 4:00 PM
5. Adjust VOLUME to the desired listening level.
6. To increase the bass, slide E-BASS to ON.
7. To turn off the radio, slide TAPE/RADIO to TAPE.
LOADING A CASSETTE TAPE
You can use the recorder to play normal bias, high-
bias, and metal tapes. However, you can only use
normal bias (Type I) tapes for recording.
Note: Your recorder comes with a block of foam to
protect the cassette recorder’s mechanism during
shipment. Remove the foam before loading a tape.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 16 Wednesday, August 25, 1999 4:00 PM
1. Take up any slack in the tape by turning the cas-
sette’s hub with a pencil. Do not touch the
exposed tape.
2. Slide OPEN in the direction of the arrow and pull
up on the compartment door to open it.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 17 Wednesday, August 25, 1999 4:00 PM
3. Insert a cassette into the door’s tape guides with
the cassette’s open edge facing up and the full
reel to the right.
4. Close the cassette compartment door.
PLAYING A CASSETTE TAPE
1. Slide TAPE/RADIO to TAPE.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 18 Wednesday, August 25, 1999 4:00 PM
2. Slide TAPE/OSC (oscillator) to NORMAL for nor-
mal bias cassette tapes or to METAL/HIGH (PB)
for chrome or metal cassette tapes.
TAPE/OSC
METAL NORMAL
HIGH(PB)
3. Slide DIRECTION to FWD to play the side facing
out, or to REV to play the reverse side.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 19 Wednesday, August 25, 1999 4:00 PM
4. Set the reverse mode switch to choose the auto-
matic reverse option:
One-Time Playback
(
): The cassette
recorder plays one side of the tape, automati-
cally reverses the tape’s playback direction,
plays the reverse side of the tape, then automat-
ically stops.
Note: If you set DIRECTION to REV, the cassette
recorder plays only the reverse side and stops at
the end of that side.
Continuous Playback (
): The cassette
recorder alternately plays each side of the tape
until you press STOP.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 20 Wednesday, August 25, 1999 4:00 PM
5. Press
PLAY. One of the BATTERY indica-
tors lights, and the tape begins to play.
6. Adjust VOLUME to the desired listening level.
7. To increase the bass, slide E-BASS to ON.
8. To stop the tape, press STOP.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 21 Wednesday, August 25, 1999 4:00 PM
USING FAST FORWARD AND
REWIND
When the tape is stopped, press
wind or fast-forward it.
or
to re-
To
DIRECTION
rewind,
To fast-
forward,
press
set to
press
FWD
REV
To stop the tape before it reaches the end, press
STOP.
Note:Toprotectthetapeafterthetapehasfullywound
to either end, press STOP to release fast-forward and
rewind.
You can press
or
during playback. The
button locks down and you can hear the tape at a
faster speed. To return to normal playback, press
PLAY.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 22 Wednesday, August 25, 1999 4:00 PM
RECORDING
You can record from the cassette recorder’s radio, or
you can use the supplied microphone to make live
recordings. Use any normal bias (Type I) tape up to
90 minutes long. We do not recommend 120-minute
tapes because they are thin and can easily tangle.
Important: To prevent accidental erasure, before us-
ing your SCR-96 to record, be sure DIRECTION is set
to FWD. If you press RECORD with DIRECTION set to
REV, the direction of tape play automatically switches
to FWD. This could cause material on the other side
of the tape to be recorded over.
Caution: If you load a cassette with the tabs broken
off, do not try to force down RECORD and PLAY at the
same time. This can damage the recording mecha-
nism. (See “Preventing Accidental Erasure” on Page
26.)
Note: The cassette recorder’s automatic level control
sets the recording level. Adjusting VOLUME has no
effect on the recording level.
Recording from the Radio
1. Load a blank cassette tape (or one you want to
record over) into the tape compartment.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 23 Wednesday, August 25, 1999 4:00 PM
2. Slide TAPE/RADIO to RADIO.
3. Slide BAND to the desired band.
4. Adjust VOLUME.
5. Rotate TUNING to select a radio station.
6. Be sure DIRECTION is set to FWD, then hold
down RECORD and press PLAY so recording
starts.
Recording continues until the tape reaches the
end. To stop recording sooner, press STOP.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 24 Wednesday, August 25, 1999 4:00 PM
Notes:
• Set PAUSE to ON to temporarily stop record-
ing. Set PAUSE to OFF to continue recording.
• To cue the tape, you can set PAUSE to ON
before you press RECORD and PLAY, and set
PAUSE to OFF when you are ready to record.
7. After you stop recording, set TAPE/RADIO to
TAPE to turn off the radio.
Note: During playback of a recorded AM program,
you might hear a high-pitched tone or a whistling
sound called a “beat.” If you hear beats, set TAPE/
OSC to its other position and record again.
Recording Live
The supplied tie-clip microphone is like two micro-
phones in one. It contains two elements so you can
record in stereo. Follow these steps to make live re-
cordings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 25 Wednesday, August 25, 1999 4:00 PM
1. Load a blank cassette tape (or one you want to
record over) into the tape compartment.
2. Connect the microphone to the cassette
recorder’s MIC jack. Point the L/R (left/right) ele-
ments of the microphone toward the sound
source as shown, or clip it to the speaker’s tie.
Avoid pointing only one end (L or R) toward the
sound source.
3. Set TAPE/RADIO to TAPE.
4. Be sure DIRECTION is set to FWD, then hold
down RECORD and press PLAY so recording
starts. Recording continues until the tape
reaches the end. To stop recording sooner,
press STOP.
Note: Set PAUSE to ON to temporarily stop
recording. Set PAUSE to OFF to continue record-
ing.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 26 Wednesday, August 25, 1999 4:00 PM
You can use stereo headphones (not supplied) to
monitor the sound while you record.
Note: If feedback (noise) occurs during recording, in-
crease the distance between the microphone and the
headphones, or turn down the volume.
TAPE TIPS
Preventing Accidental Erasure
Cassettes have two erase-protection tabs — one for
each side. When a tab is in place, you can record on
that side.
To protect a recording from being accidentally re-
corded over or erased, use a screwdriver to remove
one or both of the cassette tape’s erase-protection
tabs. This prevents RECORD from being pressed.
A
26
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 27 Wednesday, August 25, 1999 4:00 PM
If you later decide to record on a tape side after you
have removed its erase-protection tab, place a piece
of strong plastic tape over the side’s erase-protection
hole. Be sure you cover only the hole originally cov-
ered by the erase-protection tab.
Caution: Removing the erase-protection tabs does
not prevent a bulk tape eraser from erasing a cas-
sette tape.
Erasing Tapes
If you record on a previously recorded tape, you re-
place the old recording with the new. You can also
erase part or all of a tape without recording new ma-
terial by following these steps:
1. Load a cassette and disconnect the microphone,
if it is connected.
2. Set TAPE/RADIO to TAPE.
3. Press RECORD and PLAY. As the tape moves, it
is erased.
4. Press STOP to stop erasing.
If you want to quickly erase a cassette, you can use a
bulk eraser (Cat. No. 44-232).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 28 Wednesday, August 25, 1999 4:00 PM
Restoring Tape Tension and Sound
Quality
After you play a cassette tape several times, the tape
might become tightly wound on the reels. This can
cause playback sound quality to deteriorate.
To restore the sound quality, fast-forward the tape
from the beginning to the end of one side, then com-
pletely rewind it. Then loosen the tape reels by gently
tapping each side of the cassette’s outer shell on a
flat surface.
Caution: Be careful not to damage the cassette
when tapping it. Do not touch the exposed tape or al-
low any sharp objects near the cassette.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 29 Wednesday, August 25, 1999 4:00 PM
CARE
Your Optimus Stereo Mate SCR-96 AM • FM Stereo
Cassette Recorder is an example of superior design
and craftsmanship. The following suggestions will
help you care for the cassette recorder so you can
enjoy it for years.
• Keep the recorder dry. If it gets wet, wipe it dry
immediately.
• Use only fresh batteries of the recommended
size and type.
• Handle the recorder gently and carefully.
• Use and store the recorder only in normal tem-
perature environments. Temperature extremes
can shorten the life of electronic devices dam-
age batteries, and distort or melt plastic parts.
• Keep the recorder away from dust and dirt.
• Wipe the recorder with a damp cloth occasion-
ally to keep it looking new. Do not use harsh
chemicals, cleaning solvents, or strong deter-
gents to clean the recorder.
Modifying or tampering with the recorder’s internal
components can cause a malfunction and might in-
validate the recorder’s warranty and void your FCC
authorization to use it. If your recorder is not perform-
ing as it should, take it to your local RadioShack
store for assistance.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 30 Wednesday, August 25, 1999 4:00 PM
CLEANING THE TAPE-HANDLING
PARTS
Dirt, dust, or particles of the tape’s coating can accu-
mulate on the tape heads and other parts the tape
touches. This can greatly reduce the performance of
the cassette recorder. You should clean the tape-
handling parts after about every 20 hours of tape
player operation. Your local RadioShack store sells a
complete line of cassette deck cleaning supplies.
1. Remove the batteries and disconnect any other
power source.
2. Open the cassette compartment cover.
3. Press
parts.
PLAY to expose the tape-handling
4. Use a cotton swab dipped in denatured alcohol
or tape head cleaning solution to clean the play-
back head, pinch rollers, tape guides, and cap-
stans.
Pinch Rollers
Capstan
Tape Guide
Capstan
Playback
Head
Tape Guide
30
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 31 Wednesday, August 25, 1999 4:00 PM
5. When you finish cleaning, press STOP and close
the cassette compartment cover. Then recon-
nect power.
FCC INFORMATION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference re-
ceived, including interference that may cause undes-
ired operation.
Consult your local Radio Shack store if the problem
still exists.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 32 Wednesday, August 25, 1999 4:00 PM
SPECIFICATIONS
CASSETTE DECK
Tape Speed .................................. 17/8 ips (4.8 cm/s)
Wow and Flutter (WRMS) ................................. 0.5%
Frequency Response (at –3 dB) ..... 63 Hz to 15 kHz
S/N Ratio ........................................................ 47 dB
RADIO
AM .................................................. 530 to 1710 kHz
FM .................................................... 88 to 108 MHz
POWER REQUIREMENT
Batteries ............................................ 2 AA Batteries
AC .................................. 120 Volts with AC Adapter
(Cat. No. 273-1654)
DC .............................. 12 Volts DC with DC Adapter
(Cat. No. 273-1810)
Typical Radio Playing Time
with AA Alkaline Batteries ............... About 39 Hours
Typical Cassette Playing Time
with AA Alkaline Batteries ............... About 19 Hours
32
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 33 Wednesday, August 25, 1999 4:00 PM
GENERAL
Power Output ............... 15 mW/Channel at 32 ohms
Dimensions (HWD) ............. 35/8 × 43/4 × 15/16 Inches
(92 × 119 × 33 mm)
Weight (Without Battery) ................................. 6.2 oz
(175 g)
Specifications are typical; individual units might vary.
Specifications are subject to change and improve-
ment without notice.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 34 Wednesday, August 25, 1999 4:00 PM
NOTES
34
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 35 Wednesday, August 25, 1999 4:00 PM
35
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1239a.fm Page 36 Wednesday, August 25, 1999 4:00 PM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in ma-
terial and workmanship under normal use for ninety (90) days from the date of
purchase from RadioShack company-owned stores and authorized Ra-
dioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DU-
RATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN.
EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY
OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR EN-
TITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DI-
RECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING,
BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts
or the exclusion of incidental or consequential damages, so the above limita-
tions or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product
and the RadioShack sales receipt as proof of purchase date to any Ra-
dioShack store. RadioShack will, at its option, unless otherwise provided by
law: (a) correct the defect by product repair without charge for parts and labor;
(b) replace the product with one of the same or similar design; or (c) refund the
purchase price. All replaced parts and products, and products on which a re-
fund is made, become the property of RadioShack. New or reconditioned parts
and products may be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder of the original
warranty period. You will be charged for repair or replacement of the product
made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to
follow instructions, improper installation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b) any repairs other than those
provided by a RadioShack Authorized Service Facility; (c) consumables such
as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or in-
surance costs; or (f) costs of product removal, installation, set-up service ad-
justment or reinstallation.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
RadioShack Customer Relations,
200 Taylor St., 6th Floor, Fort Worth, TX 76102
We Service What We Sell
04/99
84-HJ6-904-31
990525DKK-RS9
Printed in Malaysia
07A99
Download from Www.Somanuals.com. All Manuals Search And Download.
|