Nikon Projector LT170 User Manual

LT170

Portable Projector

User’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT INFORMATION

Fire and Shock Precautions

Lamp Replacement

1. Ensure that there is sufficient ventilation and that vents are unob-

structed to prevent the build-up of heat inside your projector. Allow at

least 4 inches (10 cm) of space between your projector and a wall.

•

To replace the lamp, follow all instructions provided on page E-35.

Be sure to replace the lamp when the message "The lamp has

reached the end of its usable life. Please replace the lamp." ap-

pears. If you continue to use the lamp after the lamp has reached the

end of its usable life, the lamp bulb may shatter, and pieces of glass

may be scattered in the lamp case. Do not touch them as the pieces

of glass may cause injury.

2. Prevent foreign objects such as paper clips and bits of paper from

falling into your projector.

Do not attempt to retrieve any objects that might fall into your projec-

tor. Do not insert any metal objects such as a wire or screwdriver into

your projector. If something should fall into your projector, disconnect

it immediately and have the object removed by a qualified NEC ser-

vice personnel.

If this happens, contact your NEC dealer for lamp replacement.

•

Allow a minimum of 60 seconds to elapse after turning off the projec-

tor. Then disconnect the power cable and allow 60 minutes to cool

the projector before replacing the lamp.

3. Do not place any liquids on top of your projector.

4. Do not look into the lens while the projector is on. Serious damage to

your eyes could result.

5. Keep any items such as magnifying glass out of the light path of the

projector. The light being projected from the lens is extensive, there-

fore any kind of abnormal objects that can redirect light coming out of

the lens, can cause unpredictable outcome such as fire or injury to

the eyes.

What's in the Box?

Make sure your box contains everything listed. If any pieces are missing,

contact your dealer.

Please save the original box and packing materials if you ever need to

ship your LT170 Projector.

6. Do not cover the lens with anything other than the built-in lens shutter

while the projector is on. Doing so can lead to melting of the cover

and possibly burning your hands due to the heat emitted from the

light output.

-V

PEC

NTER

7. The projector is designed to operate on a power supply of 100-120 or

200-240 V 50/60 Hz AC. Ensure that your power supply fits this re-

quirement before attempting to use your projector.

EEZE

-M

/ S

8. Handle the power cable carefully and avoid excessive bending.

A damaged cord can cause electric shock or fire.

P U S H

Remote control

(7N900431)

COMPUTER

9. If the projector is not to be used for an extended period of time, dis-

connect the plug from the power outlet.

VIDEO IN

EO IN

S-VID

AUDIO IN

Projector

10. Do not touch the power plug during a thunderstorm. Doing so can

cause electrical shock or fire.

11. Do not handle the power plug with wet hands.

Batteries

CAUTION

1. Do not try to touch the ventilation outlet on the rear as it can become

heated while the projector is turned on.

2. Do no use the tilt-foot for purposes other than originally intended.

Misuses such as gripping the tilt-foot or hanging on the wall can cause

damage to the projector.

Power cable

(US: 7N080206)

(EU: 7N080005)

3. When carrying the projector, heed the following:

Use the supplied soft carrying case. Before putting the projector in

the soft carrying case, be sure to close the lens shutter so as not

to mar the lens.

Soft carrying case and its accessory pouch

(24BS7281)

Do not handle the projector roughly.

Do not send the soft carrying case by parcel delivery service or

cargo shipment. The projector inside the soft carrying case could

be damaged. (However, it is possible to use it as a carrier case on

board.)

RGB signal cable

(7N520012)

4. Select “High” in the Fan mode if you continue to use the projector for

consecutive days. (From the menu, select [To Advanced Menu] →

[Setup 2] → [Fan Mode].)

Band (24B17871)

5. Do not unplug the power cable from the wall outlet under any one of

the following circumstances.

Use for bundling cables.

Doing so can cause damage to the projector:

While the Hour Glass icon appears.

While the cooling fans are running. (The cooling fans continue to

work for 60 seconds after the projector is turned off).

Flat-blade screwdriver

(24C05941)

Tripod adapter

(24H49051)

CD-ROM

User’s manual

Quick

Connect

Guide

For North America only

Registration card

Important

Information

Limited warranty

For Europe only

Guarantee policy

E-3

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

Advanced Manu .......................................................... E-32

[Image]

Auto Adjust / Horizontal / Vertical / Clock / Phase /

Noise Reduction / Flicker Reduction .................................... E-32

[Setup 1]

Lamp Mode / Language / Menu Color Select /

Menu Display Time /Background / Orientation /

Cabinet Button / Security/ Portrait ....................................... E-33

[Setup 2]

Power Management / Auto Start / Fan Mode / Signal Select E-33

[Information]

IMPORTANT INFORMATION ................................E-2

Safety Cautions ........................................................................... E-2

What's in the Box? ...................................................................... E-3

INTRODUCTION....................................................E-5

Introduction to the Projector ....................................................... E-5

Part Names of the Projector ........................................................ E-6

Top Features ............................................................................. E-7

Terminal Panel Features ............................................................ E-7

Part Names of the Remote Control ........................................... E-8

Battery Installation ................................................................. E-9

Remote Control Precautions .................................................. E-9

Operating Range for Wireless Remote Control ...................... E-9

Page 1-4 .............................................................................. E-34

[Default]

Factory Default / Clear Lamp Hour Meter ............................. E-34

INSTALLATION AND CONNECTIONS ...............E-10

Setting Up the Screen and the Projector.................................... E-10

Selecting a Location ............................................................... E-10

Throw Distance and Screen Size............................................. E-11

Making Connections .................................................................. E-12

Connecting Your PC or Macintosh Computer ......................... E-12

To connect SCART output (RGB) ............................................ E-13

Connecting Your DVD Player .................................................. E-14

Connecting Your VCR or Laser Disc Player............................. E-15

Attaching the Projector to a Tripod ......................................... E-16

Connecting the Supplied Power Cable .................................... E-17

MAINTENANCE...................................................E-35

Replacing the Lamp ................................................................... E-35

Cleaning the Cabinet and the Lens............................................. E-36

TROUBLESHOOTING .........................................E-37

Power Indicator (POWER) ......................................................... E-37

Status Indicator (STATUS) ......................................................... E-37

Lamp Indicator (LAMP) ............................................................. E-37

Common Problems & Solutions ................................................ E-38

SPECIFICATIONS ...............................................E-39

PROJECTING AN IMAGE (BASIC OPERATION) ...... E-18

Turning on the Projector ............................................................ E-18

Selecting a Source ..................................................................... E-19

Adjusting the Picture Size and Position ..................................... E-19

Correcting the Vertical Keystone Distortion ............................... E-20

Optimizing RGB Picture Automatically....................................... E-21

Turning Up or Down Volume ..................................................... E-21

Turning off the Projector............................................................ E-22

After Use ................................................................................... E-22

APPENDIX ...........................................................E-40

Cabinet Dimensions................................................................... E-40

Pin Assignments of D-Sub COMPUTER Input Connector .......... E-40

Compatible Input Signal List ..................................................... E-41

TravelCare Guide........................................................................ E-42

CONVENIENT FEATURES ................................. E-24

Turning Off the Image and Sound .............................................. E-24

Freezing a Picture ...................................................................... E-24

Enlarging and Moving a Picture ................................................. E-24

Getting the Information ............................................................. E-24

Security ..................................................................................... E-24

USING ON-SCREEN MENU................................ E-27

Basic Menu Operation ............................................................... E-27

Using the Menus..................................................................... E-27

Adjusting and Setting Items.................................................... E-28

List of Menu Items .................................................................... E-29

Menu Elements .......................................................................... E-30

Menu Descriptions & Functions ................................................ E-31

Basic Menu.................................................................. E-31

Auto Adjust Executed.............................................................. E-31

Aspect Ratio ........................................................................... E-31

Picture Management ............................................................... E-31

Brightness .............................................................................. E-32

Contrast .................................................................................. E-32

Sharpness............................................................................... E-32

Color ....................................................................................... E-32

Hue ......................................................................................... E-32

Keystone ................................................................................. E-32

E-4

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

Introduction to the Projector

This section introduces you to your new LT170 Projector and describes the features and

controls.

Congratulations on Your Purchase of The LT170 Projector

The LT170 is one of the very best projectors available today.The LT170 enables you to project

precise images up to 200 inches (measured diagonally) from your PC or Macintosh computer

(desktop or notebook), VCR, DVD player, document camera, or a laser disc player.

You can use the projector on a tabletop or cart, you can use the projector to project images

from behind the screen, and the projector can be permanently mounted on a ceiling*¹. The

remote control can be used wirelessly.

*¹Do not attempt to mount the projector on a ceiling yourself.The projector must be installed

by qualified technicians in order to ensure proper operation and reduce the risk of bodily

injury.

In addition, the ceiling must be strong enough to support the projector and the installation

must be in accordance with any local building codes. Please consult your dealer for more

information.

Features you'll enjoy:

•

Auto vertical keystone correction up to +/- 30 degrees

Security feature prevents the projector from being used by unauthorized individuals.

Password protection prevents unauthorized individuals from changing projector settings.

Cabinet Button Lock helps prevent unauthorized adjustments to the projector.

One touch projection angle adjustment

•

Manual lens shutter for protecting the lens

Supplied carrying case with pouch for accessories

Short focal length lens

Remote features one touch source change buttons

New Color Management system

Newly designed menu system with dial control

Multi-language on-screen menu

The projector can be used with a tripod

NEC’s exclusive Advanced AccuBlend intelligent pixel blending technology - an extremely

accurate image compression technology - offers image display from sources up to UXGA

(1600

1200) resolution*².

•

Supports most IBM VGA, SVGA, XGA , SXGA/UXGA (with Advanced AccuBlend)*²,

Macintosh, component signal (YCbCr/YPbPr) or any other RGB signals within a horizontal

frequency range of 24 to 100 kHz and a vertical frequency range of 50 to 120 Hz. This

includes NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM and NTSC4.43 standard video sig-

nals.

A UXGA (1600

1200) and SXGA image (1280

1024) are displayed with NEC’s Ad-

vanced AccuBlend.

NOTE: Composite video standards are as follows:

NTSC: U.S. TV standard for video in U.S. and Canada.

PAL: TV standard used in Western Europe.

PAL-N: TV standard used in Argentine, Paraguay and Uruguay.

PAL-M: TV standard used in Brazil.

PAL60: TV standard used for NTSC playback on PAL TVs.

SECAM: TV standard used in France and Eastern Europe.

NTSC4.43: TV standard used in Middle East countries.

E-5

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

Part Names of the Projector

Zoom Ring

Focus Ring

Adjustable Tilt Foot Button

Controls

Remote Sensor

/ S

Lens

Ventilation (inlet)

Lens Shutter Lever

-V

Opens or closes the lens shutter.

Terminal Panel

AC Input

Connect the supplied power cable's two-pin plug here, and

plug the other end into an active wall outlet.

Adjustable Tilt Foot

Fine Adjustment Ring for Tilt Foot

PUSH

Fine Adjustment Ring for Tilt Foot

Lamp Cover

LAMP

STATUS

POWER

ON/STAND BY

ENTER

Lamp Cover Screw

Ventilation (outlet)

Monaural Speaker (0.5W)

Built-in Security Slot ( )*

This security slot supports the MicroSaver^®Security System. MicroSaver^®is a registered trademark of Kensington Microware Inc. The logo is

trademarked and owned by Kensington Microware Inc.

E-6

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

Top Features

Terminal Panel Features

SOURCE

ENTER

LAMP

AC IN

STATUS

POWER

ON/STAND BY

S-VIDEO IN

AUDIO IN

VIDEO IN

COMPUTER

1 7

1. POWER Button (ON / STAND BY)(

Use this button to turn the power on and off when the main power is

supplied and the projector is in standby mode.

To turn on the projector, press and hold this button for a minimum of

two seconds. To turn off the projector, press this button twice.

)

1. COMPUTER / Component Input Connector (Mini D-Sub 15 Pin)

Connect your computer or other analog RGB equipment such as IBM

compatible or Macintosh computers. Use the supplied RGB cable to

connect to your computer.This also serves as a component input con-

nector that allows you to connect a component video output of compo-

nent equipment such as a DVD player (optional adapter ADP-CV1

required).This connector also supports SCART output signal.See page

E-13 for more details.

2. POWER Indicator

When this indicator is green, the projector is on; when this indicator is

orange, it is in standby mode. See the Power Indicator section on page

E-37 for more details.

2. VIDEO IN Connector (RCA)

Connect a VCR, DVD player, laser disc player, or document camera

here to project video.

3. STATUS Indicator

If this light blinks red rapidly, it indicates that an error has occurred, the

lamp cover is not attached properly or the projector has overheated. If

this light remains orange, it indicates that you have pressed a cabinet

button while the Cabinet Button is locked. See the Status Indicator

section on page E-37 for more details.

3. S-VIDEO IN Connector (Mini DIN 4 Pin)

Here is where you connect the S-Video input from an external source

like a VCR.

NOTE: S-Video provides more vivid color and higher resolution than the tradi-

tional composite video format.

4. LAMP Indicator

If this light blinks red rapidly, it's warning you that the lamp has reached

the end of its usable life. After this light appears, replace the lamp as

soon as possible (See page E-35). If this is lit green continually, it

indicates that the lamp mode is set to Eco. See the Lamp Indicator

section on page E-37 for more details.

4. AUDIO IN Mini Jack (Stereo Mini)

This is where you connect the audio output from your computer or

DVD player. A commercially available audio cable is required.

5. Maintenance Terminal

For service use only.

5. MENU Button

Displays the menu. Press again to close the menu.

6. SELECT +/–, Volume Dial

* When the menu is displayed, rotating the dial makes menu selec-

tions. See page E-27.

* When the menu is not displayed, rotating the dial increases or de-

creases the volume. See page E-21.

7. SOURCE/ENTER Button

* When the menu is not displayed, this button works as the SOURCE

button. A press of the SOURCE button displays the Source Select

screen. See page E-19.

* When the menu is displayed, this button works as the ENTER but-

ton.A press of the ENTER button executes your menu selection and

activates items selected from the menu. See page E-27.

E-7

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

Part Names of the Remote Control

OFF

P0WER

S-VIDEO

COMPUTER

COMP.

VIDEO

AUTO ADJ.

AUTO

ASPECT

ENTER

HELP

CANCEL

FREEZE

PICTURE

PC-MUTE

MUTE

MAGNIFY

1. Infrared Transmitter

10. ENTER Button

Direct the remote control toward the remote sensor on the projector

cabinet.

Executes your menu selection and activates items selected from the

menu.

2. POWER ON Button

11. MENU Button

When the main power is supplied, you can use this button to turn your

projector on.

Displays the menu for various settings and adjustments.

Press again to close the menu.

NOTE: To turn on the projector, press and hold the POWER ON button for a

minimum of two seconds.

12. CANCEL Button

Pressing this button will return to the previous menu. While you are in

the Basic menu, pressing this button will close the menu.

3. POWER OFF Button

You can use this button to turn your projector off.

13. HELP Button

Provides the projector information.

NOTE: To turn off the projector, press the POWER OFF button twice.

4. VIDEO Button

14. PICTURE Button

Press this button to display the Picture adjustment screen such as

Brightness, Contrast, Sharpness, Color and Hue. See page E-32.

Press this button to select a video source from a VCR, DVD player,

laser disc player or document camera.

5. S-VIDEO Button

Press this button to select an S-Video source from a VCR.

15. PIC-MUTE Button

This button turns off the image and sound for a short period of time.

Press again to restore the image and sound.

6. COMPUTER Button

Press this button to select Computer input.

16. FREEZE Button

This button will freeze a picture. Press again to resume motion.

7. AUTO ADJ. Button

Use this button to adjust an RGB source for an optimal picture.

See page E-21.

17. MAGNIFY (+)(–) Button

Use this button to adjust the image size up to 400%.

The image is magnified about the center of the screen. See page E-

24.

8. ASPECT Button

Press this button to display the Aspect Ratio select screen. See page

E-31.

9. ̆̄̇̈ Button

̆̄ : Use these buttons to select the menu of the item you wish to

adjust.

̇̈ : Use these buttons to change the level of a selected menu item.

When no menus appear, these buttons work as a volume con-

trol.

When an image is magnified, the ̆̄̇̈ button moves the image.

E-8

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

Battery Installation

Remote Control Precautions

1. Press firmly and slide the battery cover off.

•

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

If you will not be using the remote control for a long time, remove the

batteries.

•

Do not place the batteries upside down.

Do not use new and old batteries together, or use different types of

batteries together

2. Remove both old batteries and install new ones (AAA). Ensure that

you have the batteries' polarity (+/-) aligned correctly.

Operating Range for Wireless Remote Control

7m / 22 feet

Remote sensor on

projector cabinet

30°

3. Slip the cover back over the batteries until it snaps into place. Do not

mix different types of batteries or new and old batteries.

Remote control

Actual operating range may differ from the above drawing.

•

The infrared signal operates by line-of-sight up to a distance of about

22 feet/7 m and within a 60-degree angle of the remote sensor on the

projector cabinet.

•

The projector will not respond if there are objects between the remote

control and the sensor, or if strong light falls on the sensor.Weak bat-

teries will also prevent the remote control from properly operating the

projector.

E-9

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

This section describes how to set up your projector and how to connect video and audio sources.

Your projector is simple to set up and

use. But before you get started, you

must first:

ᕃ Set up a screen and the projector.

ᕄ Connect your computer or video

equipment to the projector. See

pages E-12 to 15.

ᕅ Connect the supplied power cable.

See page E-17.

NOTE: Ensure that the power cable and any

other cables are disconnected before mov-

ing the projector. When moving the projec-

tor or when it is not in use, close the lens

shutter.

To the wall outlet.

Setting Up the Screen and the Projector

Selecting a Location

The further your projector is from the screen or wall, the larger the image.The minimum size the image can be is approximately 30" (0.76 m) measured

diagonally when the projector is roughly 44.5 inches (1.1 m) from the wall or screen.The largest the image can be is 200" (5.0 m) when the projector is

about 305.5 inches (7.8 m) from the wall or screen. Use the drawing below as a guide.

Screen size (Unit: cm / inch)

406.4 (W)

304.8 (H) / 160 (W)

120 (H)

200"

365.8 (W)

274.3 (H) / 144 (W)

108 (H)

Screen size

180"

304.8 (W)

228.6 (H) / 120 (W)

90 (H)

150"

243.8 (W)

182.9 (H) / 96 (W)

72 (H)

120"

100"

80"

60"

203.2 (W)

152.4 (H) / 80 (W)

60 (H)

162.6 (W)

121.9 (H) / 64 (W)

48 (H)

121.9 (W)

91.4 (H) / 48 (W)

36 (H)

81.3 (W)

61.0 (H) / 32 (W)

24 (H)

7.8/305.5

7.0/274.8

40"

30"

61.0 (W)

45.7 (H) / 24 (W)

18 (H)

5.8/228.7

Lens center

4.6/182.7

3.9/152.2

1.1

44.5

3.1/121.3

2.3/90.6

1.5/59.8

Distance (Unit: m/inch)

CAUTION:To avoid premature lamp failure, do not tilt the front of

the projector up or down by more than 10° from level.

E-10

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

Throw Distance and Screen Size

The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation.

Distance Chart

Screen Width

B = Vertical distance between lens center and screen center

C = Throw distance

Screen Diagonal

D = Vertical distance between lens center and top of screen (bottom of

screen for desktop)

α = Throw angle

Screen Height

Screen center

NOTE: Distances may vary +/-5%.

( )

(

)

Screen Bottom

Lens Center

Throw Angle (α)

(

)

Throw Distance C

Screen Size

Width

inch

Screen Size

Width

610

813

1219

1361

1463

1626

1707

1829

2032

2438

3048

3658

4064

Diagonal

inch

Height

inch

108

120

Wide – Tele

inch

Wide – Tele

degree

Diagonal

762

Height

457

610

914

1021

1097

1219

1280

1372

1524

1829

2286

2743

3048

Wide – Tele

degree

inch

9.7

9.5

9.4

8.7

8.6

8.5

183 1070 - 1190

244 1450 - 1590

366 2190 - 2410

408 2450 - 2700

439 2640 - 2900

487 2930 - 3230

512 3080 - 3390

548 3300 - 3640

609 3680 - 4050

731 4420 - 4860

914 5530 - 6090

1097 6650 - 7310

1219 7390 - 8130

9.7

9.5

9.4

8.7

8.6

8.5

1016

1524

1702

1829

2032

2134

2286

2540

3048

3810

4572

5080

106

114

127

133

143

159

191

240

288

320

102

110

122

128

137

153

183

229

275

305

104

115

121

130

145

174

218

262

291

100

120

150

180

200

120

144

160

WARNING

Reflecting the Image

Installing your projector on the ceiling must be done by a quali-

fied technician. Contact your NEC dealer for more information.

Using a mirror to reflect your projector's image enables you to enjoy a

much larger image.Contact your NEC dealer if you need a mirror. If you're

using a mirror and your image is inverted, use the MENU button and

SELECT dial on your projector cabinet or the MENU and the ̆̄̇̈

buttons on your remote control to correct the orientation. (See page E-

33.)

Do not attempt to install the projector yourself.

•

Only use your projector on a solid, level surface. If the projector falls to

the ground, you can be injured and the projector severely damaged.

•

Do not use the projector where temperatures vary greatly.The projec-

tor must be used at temperatures between 41˚F (5˚C) and 95˚F (35˚C).

Do not expose the projector to moisture, dust, or smoke.This will harm

the screen image.

Ensure that you have adequate ventilation around your projector so

heat can dissipate. Do not cover the vents on the side or the front of

the projector.

E-11

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

Making Connections

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases

signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.

* If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER button again to resume.

Connecting Your PC or Macintosh Computer

COMPUTER

AUDIO IN

AC IN

AUDIO IN S-VIDEO IN VIDEO IN

COMPUTER

RGB signal cable (supplied)

Audio cable (not supplied)

To mini D-Sub 15-pin connector on the pro-

jector. It is recommended that you use a

commercially available distribution amplifier

if connecting a signal cable longer than the

supplied one.

IBM PC or Compatibles (Desktop type)

or Macintosh (Desktop type)

PHONE

NOTE: For older Macintosh,

use a commercially available

pin adapter (not supplied) to

connect to your Mac's video

port.

PHONE

IBMVGA or Compatibles (Notebook type)

or Macintosh (Notebook type)

Connecting your PC or Macintosh computer to your projector will enable you to project your computer's screen image for an impressive presentation.

To connect to a PC or Macintosh, simply:

1. Turn off the power to your projector and computer.

2. Use the supplied signal cable to connect your PC or Macintosh to the projector.

3. Turn on the projector and the computer.

4. If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you've connected to the projector.

E-12

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

To connect SCART output (RGB)

Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection.

NOTE: Audio signal is not available for this connection.

Projector

Video equipment such as DVD player

COMPUTER

AC IN

AUDIO IN S-VIDEO IN VIDEO IN

COMPUTER

To COMPUTER connector

ADP-SC1

Female

Commercially available

SCART cable

5. Press the MENU button on the remote control to display the menu.

1. Turn off the power to the projector and your video equipment.

2. Use the NEC ADP-SC1 SCART adapter and a commercially available

SCART cable to connect the COMPUTER input of your projector and

a SCART output (RGB) of your video equipment.

6. From the menu, select [To Advanced Menu] → [Setup 2] → [Signal

Select Computer] → [Scart].

SCART is a standard European audio-visual connector for TVs, VCRs

and DVD players. It is also referred to as Euro-connector.

3. Turn on the power to the projector and your video equipment.

4. Use the COMPUTER button on the remote control to select the COM-

PUTER input.

NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Eu-

rope. Contact your NEC dealer in Europe for more information.

Using the projector in portrait mode

When connecting with a Tablet PC, you can display an image in portrait

mode with the projector on its side.

•

Place the projector on a location such as a table with the terminal

panel side up.

•

Be sure to place the projector on a flat level surface.

Auto Keystone correction feature is not available.

The on-screen menu will not be rotated.

If the image is displayed upside down, select [Advanced menu] →

[Setup 1] → [Portrait] → [0°] or [180°] for display orientation of your

PC. See also page E-33 for Portrait.

D U

E T

MAL

UTATS

NATS/

The projected image is displayed at a lower level than

the normal position. Adjust the projection angle and

position for the correct position of the projected image

on screen.

E-13

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

Connecting Your DVD Player

COMPUTER

AUDIO IN

AC IN

AUDIO IN S-VIDEO IN VIDEO IN

COMPUTER

Optional 15-pin-to-RCA

(female)

3 cable (ADP-CV1)

Component video RCA

3 cable

(not supplied)

Audio Equipment

DVD player

Cb Cr

AUDIO IN

AUDIO OUT

Component

Audio cable

(not supplied)

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

1. Turn off the power to your projector and DVD player.

2. If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCA

3) and the optional 15-

pin-to-RCA (female)

3 cable to connect your DVD player to the COMPUTER input connector on the projector.

For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the

DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.

E-14

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

Connecting Your VCR or Laser Disc Player

VIDEO IN

S-VIDEO IN

AC IN

AUDIO IN S-VIDEO IN VIDEO IN

COMPUTER

S-Video cable (not supplied)

Video cable (not supplied)

Audio equipment

VCR/ Laser disc player

S-VIDEO VIDEO

VIDEO OUT

AUDIO IN

AUDIO OUT

Audio cable (not supplied)

Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.

To make these connections, simply:

1. Turn off the power to the projector and VCR, laser disc player or document camera.

2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video

input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your

VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.

3. Turn on the projector and the VCR or laser disc player.

NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output requirements.

E-15

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

3. Attach the projector to the tripod.

Open the tripod to a fully extended position for greatest stability.

Attaching the Projector to a Tripod

The projector can be used with a camera tripod.

To attach the projector to a tripod, use the supplied tripod adapter.

CAUTION

N T E R

B Y

/ S

E R

O W

N U

A T U

S T

M E

L A M

Care should be taken in handling a tripod.

Using the tripod on an unstable surface may result in the

tripod falling over or the projector falling which may result

in damage to the projector and possible personal injury.

Read the instructions supplied with your tripod for handling

and cautions.

COMPUTER

VIDEO IN

S-VIDEO IN

AUDIO IN

• Use a tripod that can fully support the weight of the pro-

jector (approximately 5.5 lb/2.5 kg including attachment).

• Place the tripod with its feet fully open and weight evenly

distributed for stability.

• When using a tripod with a geared elevator, do not ex-

tend the geared elevator.

• When displaying an image in portrait mode (with the

projector on its side) (page E-13), be sure the tripod is

balanced for stability. Failure to do so may result in the

tripod falling over.

Preparation:

1. Disconnect all the cables.

2. A flat-blade screwdriver is required for attaching the sup-

plied three (3) screws. Use the supplied flat-blade screw-

driver.

4. Connect all the cables.

1. Turn the projector upside down.

Place the projector on a soft cloth so as not to scratch the cabinet

surface.

2. Attach the supplied tripod adapter to the bottom of the

projector.

Secure the tripod adapter to the projector with the supplied (3) screws.

E-16

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION AND CONNECTIONS

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.

First connect the supplied power cable's two-pin plug to the AC IN of the

projector, and then connect the other plug of the supplied power cable in

the wall outlet.

LAMP

O U R C

/ S

STATUS

POWER

ON/STAND BY

PUTER

COM

VIDE

IDE

S-V

AUDIO IN

The projector will go into its standby mode and the power indicator will

glow orange.

SOURCE

LAMP

ENTER

STATUS

POWER

ON/STAND BY

CAUTION:

Do not unplug the power cable from the wall outlet under any one of the

following circumstances.

Doing so can cause damage to the projector:

* While the Hour Glass icon appears.

* While the cooling fans are running.(The cooling fans continue to work

for 60 seconds after the projector is turned off).

E-17

Download from Www.Somanuals.com. All Manuals Search And Download.

PROJECTING AN IMAGE (BASIC OPERATION)

This section describes how to turn on the projector and to project a pic-

ture onto the screen.

2. Press the ENTER button to execute the selection.

OFF

P0WER

S-VIDEO

Turning on the Projector

COMPUTER

COMP.

Before you turn on your projector, ensure that the computer or video

source is turned on and that your lens shutter is open.

VIDEO

SOURCE

ENTER

AUTO ADJ.

AUTO

LAMP

ASPECT

STATUS

POWER

ON/STAND BY

Z O O M

ENTER

F O C U

P U S H

CANCEL

-V

After this has been done, you can proceed to the menu operation.

NOTE: Immediately after turning on the projector, screen flicker may occur. This

is not a malfunction. Wait 3 to 5 minutes until the lamp lighting is stabilized.

When the Lamp mode is set to Eco, the Lamp indicator will light green.

If one of the following things happens, the projector will not turn on.

Only after you press the POWER (ON/STAND BY) button on the projec-

tor cabinet or POWER ON button on the remote control for a minimum of

2 seconds will the power indicator turn to green and the projector be-

come ready to use.

If the internal temperature of the projector is too high, the projector

detects abnormal high temperature. In this condition the projector will

not turn on to protect the internal system. If this happens, wait for the

projector's internal components to cool down.

OFF

P0WER

S-VIDEO

COMPUTER

COMP.

VIDEO

When the lamp reaches its end of usable life, the projector will not turn

on. If this happens, replace the lamp.

SOURCE

ENTER

AUTO ADJ.

AUTO

LAMP

ASPECT

STATUS

POWER

If the lamp fails to light, and if the STATUS indicator flashes on and off

in a cycle of six times, wait a full minute and then turn on the power.

ON/STAND BY

ENTER

If one of the following things happen, the projector will mute a picture. If it

continues muting for 15 minutes, the projector will go into standby mode.

NOTE: To turn the projector on by plugging in the power cable, use the menu and

enable the “Auto Start” feature. (See page E-33)

Turning on the power with the lens shutter closed.

Closing the lens shutter during operation.

Note on Startup screen (Menu Language Select screen)

When you first turn on the projector, you will get the Startup screen.This

screen gives you the opportunity to select one of the 7 menu languages.

Directing the lens downward by more than 60° from level during

operation.

Turning on the power with the lens directed down by more than 60°

from level.

NOTE: If you want, you can select one of the 20 menu language later. See "Lan-

guage" on page E-33.

To select a menu language, follow these steps:

1. Use the dial to select one of the 7 languages for the menu.

When using the remote control, keep pressing the ̄ button several

times until your language is highlighted.

OFF

P0WER

S-VIDEO

COMPUTER

COMP.

VIDEO

AUTO ADJ.

AUTO

ASPECT

SOURCE

ENTER

LAMP

STATUS

POWER

ENTER

ON/STAND BY

CANCEL

E-18

Download from Www.Somanuals.com. All Manuals Search And Download.

PROJECTING AN IMAGE (BASIC OPERATION)

Move the projector left to center the image horizontally on the screen.

Selecting a Source

Selecting the computer or video source

Using the cabinet buttons

SOURCE

ENTER

LAMP

STATUS

POWER

ON/STAND BY

Press and quickly release the SOURCE button on the projector cabinet

to display the Source list. Each time the SOURCE button is pressed,

each source name will be highlighted in sequence. Highlighting a source

name will display an hour glass icon in one second. After that the input

signal will be selected.

Adjust the Tilt Foot

1. Lift the front part of the projector.

PUSH

Push and hold the

the front top of the projector to extend the adjustable tilt feet up to a

maximum height.

symbol of the Adjustable Tilt Foot button on

Using the Remote Control

OFF

P0WER

S-VIDEO

COMPUTER

COMP.

VIDEO

S H

P U

AUTO ADJ.

AUTO

PUTER

ASPECT

VID

Press any one of the COMPUTER, VIDEO or

S-VIDEO buttons.

S-VIDEO

DIO

ENTER

HELP

CANCEL

FREEZE

Adjustable Tilt Foot

Adjustable Tilt Foot Button

PICTURE

PC-MUTE

MUTE

MAGNIFY

2. Lower the front of the projector to the desired height (max.40mm/1.6”)

and release the Adjustable Tilt Foot Button to lock the Adjustable tilt

foot. There is approximately 10 degrees of up and down adjustment

for the front of the projector.

NOTE: If no input signal is available, the projector will display a blue background

(factory preset).

S O U R C E

/ S

L A

Adjusting the Picture Size and Position

Place your projector on a flat level surface and ensure that the projector

is square to the screen.

Lift the front edge of the projector to center the image vertically.

If the projected image does not appear square to the screen then use

the Keystone feature for proper adjustment. See page E-20.

NOTE: You can rotate the Fine Adjustment rings of both tilt feet on the left and

right sides of the cabinet front for fine adjustment of the tilt feet.

CAUTION:

Do not use the tilt-foot for purposes other than originally intended.

Misuses such as gripping the tilt-foot or hanging on the wall can

cause damage to the projector.

E-19

Download from Www.Somanuals.com. All Manuals Search And Download.

PROJECTING AN IMAGE (BASIC OPERATION)

Zoom

2. Select the Keystone function. Rotate the SELECT +/- dial to select

“Keystone” and then press the ENTER button.

Use the ZOOM ring to finely adjust the image size on the screen.

PUSH

CUS

ZOOM

The three options will be displayed.

You can use the ZOOM ring to enlarge or reduce an image size.

Focus

Use the FOCUS ring to obtain the best focus.

PUSH

FOCUS

ZOOM

3. Rotate the SELECT +/- dial to select “Manual” and then press the

ENTER button.

The Keystone adjustment bar will be displayed.

Correcting the Vertical Keystone Distortion

4. Correct the vertical distortion.

Rotate the SELECT +/– dial to correct the vertical keystone distor-

tion.

Auto Keystone Correction

The Auto Keystone correction feature will correct the vertical distortion of

a projected image on the screen. No special operation required. Just put

the projector on a flat surface.

Note that the vertical keystone angle can be corrected between 30 de-

grees upward and 30 degrees downward of projector tilt from level.

5. Press the ENTER button to take effect.

6. Press the MENU button to close the menu.

NOTE:

•

You can save the changes by selecting “Manual (Save)” when you turn off the

projector.

NOTE: Keystone correction angle could be less than 30 degrees for some signals

that have a high resolution or frequency such as UXGA.

•

When you use the projector in portrait mode, vertical keystone distortion

looks horizontal keystone distortion.

Manual Keystone Correction

You can also correct the vertical keystone distortion manually.

To do so:

1. Press the MENU button.

The menu will be displayed.

E-20

Download from Www.Somanuals.com. All Manuals Search And Download.

PROJECTING AN IMAGE (BASIC OPERATION)

Using the remote control

Press the AUTO ADJ. button

Optimizing RGB Picture Automatically

Adjusting the Image Using Auto Adjust

The Hour Glass icon will appear. It takes some

seconds to optimize an RGB image.

OFF

P0WER

S-VIDEO

Optimizing RGB image automatically.

COMPUTER

COMP.

VIDEO

Using the cabinet buttons

1. Press the MENU button .

AUTO ADJ.

AUTO

ASPECT

The Basic menu will be displayed. Make sure that “Auto Adjust Ex-

ecuted” is selected.

ENTER

CANCEL

This function adjusts the clock frequencies that eliminate the horizontal

banding in the image. This function also adjusts the clock phase to re-

duce video noise, dot interference or cross talk. (This is evident when

part of your image appears to be shimmering.)

SOURCE

ENTER

LAMP

STATUS

POWER

ON/STAND BY

This adjustment may be necessary when you connect your computer for

the first time.

NOTE:

• Some signals may not be displayed correctly or take time.

• The Auto Adjust function does not work for component and video signal.

• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock

and Phase manually. See page E-32.

Turning Up or Down Volume

Sound level from the speaker on the projector can be adjusted when the

menu is not displayed.

2. Press the ENTER button to optimize an RGB image automatically.

The Hour Glass icon will appear.It takes some seconds to optimize an

RGB image.

SOURCE

ENTER

LAMP

increase volume

decrease volume

STATUS

POWER

ON/STAND BY

SOURCE

ENTER

LAMP

STATUS

POWER

ON/STAND BY

OFF

P0WER

S-VIDEO

COMPUTER

COMP.

VIDEO

AUTO ADJ.

AUTO

ASPECT

ENTER

decrease volume

increase volume

CANCEL

E-21

Download from Www.Somanuals.com. All Manuals Search And Download.

PROJECTING AN IMAGE (BASIC OPERATION)

Turning off the Projector

After Use

Preparation: Make sure that the projector is not turned on.

1. Unplug the power cable.

To turn off the projector:

First, press the POWER (ON/STAND BY) button on the projector cabinet

or the POWER OFF button on the remote control. The “Power Off / Are

you sure?” message will appear.

2. Disconnect any other cables.

3. Retract adjustable tilt feet if extended.

SOURCE

ENTER

LAMP

STATUS

POWER

R C

O U

ON/STAND BY

Z O O M

F O C U S

-V

OFF

P0WER

COMPUTER

COMP.

VIDEO

S-VIDEO

AUTO ADJ.

AUTO

ASPECT

ᕃ Lift the front part of the projector.

PUSH

ENTER

ᕄ Push and hold the

symbol of the Adjustable Tilt Foot button to

extend the adjustable tilt feet up to a maximum height.

CANCEL

ᕅ Lower the front of the projector while pressing and holding the

Adjustable Tilt Foot button until retracting the Adjustable Tilt Foot

down to a minimum height.

Secondly, press the ENTER button or press the POWER (ON/STAND

BY) or the POWER OFF button again.

4. Use the Lens Shutter lever to close the lens shutter.

E R

R C

E N

The power indicator will glow orange. After the projector turns off, the

cooling fans keep operating for 60 seconds (Cooling-off time).

Lastly unplug the power cable. The power indicator will go out.

O O

U S

F O C

P U S

CAUTION

Do not unplug the power cable from the wall outlet under any one of

the following circumstances. Doing so can cause damage to the

projector:

S-VIDEO IN

AUDIO IN

•

While the Hour Glass icon appears.

•

While the cooling fans are running. (The cooling fans continue to

work for 60 seconds after the projector is turned off).

5. Put the projector and its accessories in the soft carrying case.

See “Using the Soft Carrying Case” on the following page.

E-22

Download from Www.Somanuals.com. All Manuals Search And Download.

PROJECTING AN IMAGE (BASIC OPERATION)

Using the Soft Carrying Case

The accessory pouch can be attached to the soft carrying case as shown in the drawing.

Placing the projector and its accessories in the soft carrying case

Put through

Put through and fix it

Work should be done on a flat level surface to prevent overturning.

Quick Guide

PUSH

FOCUS

ZOOM

Projector

RGB signal cable

Power cable

S-V

PIC

-M

Remote control

The length of the belt is adjustable.

Remove

E-23

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENT FEATURES

Turning Off the Image and Sound

Getting the Information

Press the PIC-MUTE button to turn off the image and sound for a short

period of time. Press again to restore the image and sound.

You get the information about the signal and projector settings.

HELP

CANCEL

HELP

CANCEL

HELP

CANCEL

FREEZE

PICTURE

PC-MUTE

MUTE

PICTURE

PC-MUTE

MUTE

MAGNIFY

PICTURE

PC-MUTE

MUTE

MAGNIFY

Display Information

Exit Information

Freezing a Picture

Press the FREEZE button to freeze a picture. Press again to resume

motion.

Security

A keyword can be set for your projector to avoid operation by an unau-

thorized user using the Menu. When a keyword is set, turning on the

projector will display the Keyword input screen. Unless the correct key-

word is entered, the projector cannot project an image.

HELP

CANCEL

FREEZE

PICTURE

PC-MUTE

MUTE

MAGNIFY

To set a keyword:

1. Press the MENU button.

The Basic menu will be displayed.

Enlarging and Moving a Picture

You can enlarge the picture up to 400 percent.

To do so:

1. Press the MAGNIFY (+) button to magnify the picture.

To move the magnified image, use the ̆̄̇̈ button.

HELP

CANCEL

FREEZE

PICTURE

PC-MUTE

MUTE

2. Rotate the SELECT +/- dial to select [To Advanced Menu] and press

the ENTER button.

MAGNIFY

The Advanced menu will be displayed.

OFF

P0WER

S-VIDEO

COMPUTER

COMP.

VIDEO

AUTO ADJ.

AUTO

ASPECT

ENTER

CANCEL

2. Press the MAGNIFY (-) button to return the image to the original size.

CANCEL

HELP

FREEZE

PICTURE

PC-MUTE

MUTE

MAGNIFY

E-24

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENT FEATURES

3. Rotate the SELECT +/- dial to select [Setup1] - [Security] and press

the ENTER button.

To turn on the projector when Security is enabled:

The Security menu will be displayed.

1. Press and hold the POWER (ON/STAND BY) button for a minimum of

2 seconds.

The projector will turn on and display a message to the effect that the

projector is security-protected.

2. Press the MENU button.

The Keyword input screen will be displayed.

4. Rotate the SELECT +/- dial to select [Keyword] and press the ENTER

button.

The software keyboard will be displayed.

3. Enter your keyword.

For entering your keyword, see Step 5 in “To set a keyword”.

4. Select

and press the ENTER button.

The Security is unlocked.You can view a projected image.

The unlock condition is maintained until the main power is turned off by

unplugging the power cable.

5. Use the SELECT +/- dial to type a keyword in the Input field.

Selected characters will be displayed in Input field.

The keyword must be no more than 10 alphanumeric characters.

Typing a keyword

To select a character, rotate the SELECT+/- dial to highlight the

character you want to select and press the ENTER button.

To delete a character, rotate the SELECT+/- dial to highlight

and press the ENTER button. The character at the far right will be

deleted.

For the selected keyword to take effect, rotate the SELECT+/- dial

to highlight

To cancel the selected keyword, rotate the SELECT+/- dial to high-

light and press the ENTER button.

and press the ENTER button.

6. After finishing typing keyword, rotate the SELECT+/- dial to highlight

[Exit] and press the ENTER button.

The confirmation screen will be displayed.

7. Rotate the SELECT +/- dial to select [Yes] and press the ENTER but-

ton.

The Security function is enabled.

E-25

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVENIENT FEATURES

To disable the Security function:

NOTE:

If you forget your keyword, contact your dealer. Your dealer will provide you

1. Press the MENU button.

The Basic menu will be displayed.

with your keyword in exchange for your request code. Your request code is

displayed in the Keyword input screen. In this example “K992-45L8-JNGJ-

4XU9-1YAT-EEA2” is a request code.

2. Rotate the SELECT +/- dial to select [To Advanced Menu] and press

the ENTER button.

The Advanced menu will be displayed.

3. Rotate the SELECT +/- dial to select [Setup1] - [Security] and press

the ENTER button.

The Keyword input screen will be displayed.

4. Enter your keyword.

For entering your keyword, see Step 5 in “To set a keyword”.

5. Rotate the SELECT +/– dial to select

ton.

and press the ENTER but-

The Security is unlocked. The Security menu will be displayed.

6. Rotate the SELECT +/- dial to select [Security] and press the ENTER

button.

7. Rotate the SELECT +/- dial to select [Disable] and press the ENTER

button.

This will disable the Security function and return to the Security menu.

8. Rotate the SELECT +/- dial to select [Exit] and press the ENTER.

9. Press the MENU button to close the menu.

E-26

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

4. Rotate the SELECT +/- dial to highlight the item you want to adjust or

set.

The example below is for Graphic.

Basic Menu Operation

The Menu consists of Basic and Advanced. While the Basic menu con-

tains minimum essentials of menus and commands, the Advanced menu

contains all the available menus and commands.

The Basic menu is accessed by pressing the MENU button.

Selecting “To Advanced Menu” in Basic menu will go to the Advanced

menu.

Using the Menus

For Basic menu

1. Press the MENU button to display the Basic menu.

5. Press the ENTER button.

The item is selected. This will return to the Basic menu.

6. Press the MENU button to close the menu.

NOTE:

The menu will automatically disappear if no operation is made for 45 seconds.

The menu display time (default 45 seconds) can be changed. See page E-33.

The on-screen menu may not be displayed correctly while interlaced motion

video image is projected.

2. Rotate the SELECT +/- dial to highlight the menu item you want to

adjust or set.

The example below is for Picture Management.

For Advanced menu

1. Press the MENU button to display the Basic menu.

3. Press the ENTER button.

The Picture Management item will be displayed on its right side.

2. Rotate the SELECT +/- dial to highlight [To Advanced menu] and press

the ENTER button.

The Advanced menu will be displayed.

E-27

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

3. Rotate the SELECT +/- dial clockwise.

2. Press the ENTER button.

The selected item will be displayed.

Keep rotating the SELECT +/- dial until the highlight reaches [Noise

Reduction]. When the highlight reaches [Flicker Reduction], [Setup 1]

menu will be displayed.

3. Rotate the SELECT +/- dial to highlight the item you want to set.

Keep rotating the SELECT +/- dial clockwise and the menu items will

sequence as follows: [Image] → [Setup 1] → [Setup 2] → [Information] →

[Default] → [Image] → ...

4. Press the ENTER button.

This will return to the previous menu.

NOTE:

Keep rotating the SELECT +/- dial counterclockwise and the menu items

will sequence as follows: [Default] → [Information] → [Setup 2] → [Setup

1] → [Image] → [Default] → ...

The ENTER/SOURCE button on the cabinet works as:

Execute menu selection.

Adjust the slide bar.

Display the submenu

Adjusting and Setting Items

For Adjusting items

1. Rotate the SELECT +/- dial to highlight the menu item you want to

adjust.

2. Press the ENTER button.

3. Rotate the SELECT +/- dial to adjust the item.

4. Press the ENTER button.

Changes will take effect.

For Selecting items

1. Rotate the SELECT +/- dial to highlight the menu item you want to set.

E-28

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

List of Menu Items

Basic Menu

Menu items

Items

Auto Adjust Executed

Aspect Ratio

Normal, Wide, Zoom, Cinema, Native

Picture Management

Presentation, Video, Movie, Graphic, sRGB, User

User Setting Base Setting (Presentation, Video, Movie, Graphic, sRGB)

Gamma Correction (Dynamic, Black Detail, Natural)

Brightness R

Brightness G

Brightness B

Contrast R

Contrast G

Contrast B

White Peaking

Brightness

Contrast

Sharpness

Color

Hue

Keystone

To Advanced Menu

Auto, Manual, Manual (Save)

Advanced Menu

Category

Menu items

Items

Image

Auto Adjust

Horizontal

Vertical

Clock

On, Off

Phase

Noise Reduction

Flicker Reduction

Lamp Mode

On, Off

Normal, Eco

Setup 1

Language

English, Deutsch, Français, Italiano, Español, Svenska,

, Português,

Nederlands, Suomi,

, Türkçe, Cesky,

, Magyar, Norsk, Polski,

Menu Color Select

Menu Display Time

Background

Color, Monochrome

Manual, Auto 5 sec, Auto 15 sec, Auto 45 sec

Blue, Black, Logo

Orientation

Desktop Front, Ceiling Rear, Desktop Rear, Ceiling Front

Cabinet Button

Security

Lock, Unlock

Security (Enable, Disable)

Keyword

Portrait

0°, 180°

Power Management

Auto Start

On, Off

Setup 2

Fan Mode

High, Auto

Signal Select Computer

Video

RGB/Component, RGB, Component, Scart

Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

Source Index, Horizontal Frequency, Vertical Frequency, Sync Polarity

Signal Type, Video Type, Sync Type, Interlace

Remaining Lamp Time, Lamp Hour Meter, Projector Usage

Version (BIOS, Firmware, Data, GUI)

S-Video

Page 1

Information Page 2

Page 3

Page 4

Factory Default (Current Signal)

Default

Factory Default (All Data)

Clear Lamp Hour Meter

E-29

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

Menu Elements

Check mark

Highlight

Slide bar

Return key symbol

Key symbol

Source

Thermometer symbol

Radio button

Title

Menu windows or dialog boxes typically have the following elements:

Title ........................... Indicates the menu title.

Highlight .................... Indicates the selected menu or item.

Source....................... Indicates the currently selected source.

Return key symbol .... Indicates further choices are available.

Radio button .............. Use this round button to select an option in a dialog box.

Check mark ............... Indicates the item is selected.

Slide bar .................... Indicates settings or the direction of adjustment.

Key symbol ................ Indicates the Cabinet Button is locked.

Thermometer symbol .......... Indicates the lamp mode is forcibly set to Eco mode because the internal temperature is too high.

E-30

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

Native (COMPUTER only): Turns off the Advanced AccuBlend fea-

ture. The projector displays the current image in its true resolution.

Menu Descriptions & Functions

Basic Menu

NOTE:

* While you are displaying an image with higher resolution than the projector’s

native resolution, “Native” is not available.

* Selecting “Cinema” will display the Cinema Position slide bar which allows

you to adjust the vertical position of the image on the screen.

Please note that using this projector for the purpose of commercial gain or the

attraction of public attention in a venue such as a coffee shop or hotel and

employing compression or expansion of the screen image with a "Aspect Ra-

tio" setting may raise concern about the infringement of copyrights which are

protected by copyright law.

[Picture Management]

[Auto Adjust Executed]

Optimizing RGB image automatically. (See page E-21)

Selecting Aspect Ratio [Aspect Ratio]

This option allows you to adjust neutral tint for yellow, cyan or magenta.

There are 5 factory presets optimized for various types of images, or you

can set user adjustable settings.

Presentation .. Recommended for making a presentation using a

PowerPoint file

Aspect Ratio allows you to select the best Aspect mode to display your

source image.You can also display the Aspect Ratio window by pressing

the “ASPECT” button on the remote control. (See page E-8).

Video ............. Recommended for regular picture such asTV program

Movie ............. Recommended for movie

Graphic .......... Recommended for graphics

sRGB ............. Standard color values

When 4:3 is selected from the source (i.e. DVD player), the following

selections will display:

Normal

Wide Zoom

Cinema

Native

User ............... User adjustable

NOTE: When “sRGB”, “Graphic”, “Video” or “Movie” is selected, the bright-

ness decreases slightly when compared to “Presentation”. This is not a mal-

function.

Standard

4:3 Aspect

Left and right

stretched

Left and right

stretched

User Setting (when using User)

When selecting a user adjustable preset (User Setting), the submenu

will be displayed.

When 16:9 is selected from the source (i.e. DVD player), the follow-

ing selections will display:

You can customize each gamma or color. To do so, first select “User

Setting” and press the ENTER button, and then proceed with the fol-

lowing steps.

Normal

Wide Zoom

Cinema

Native

Selecting Base Setting [Base setting]

This feature allows you to use white balance or gamma values as

reference data to optimize for various types of images.You can select

one of the following five settings.

• Presentation

• Video

• Movie

• Graphic

• sRGB

16:9 image

displayed in

4:3 mode

Left and right

stretched

Left and right

stretched to

display the true

aspect

Selecting Gamma Correction Mode [Gamma Correction]

Each mode is recommended for :

Dynamic ......... For true color reproduction of natural tones

Natural ........... Normal settings

Black Detail .... For dark portions of a picture

E-31

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

Adjusting White Balance [Brightness R/G/B, Contrast R/G/B]

This allows you to adjust the white balance. Brightness for each color

(RGB) is used to adjust the black level of the screen;Contrast for each

color (RGB) to adjust the white level of the screen.

Advanced Menu

[Image]

Selecting White Peaking [White Peaking]

Adjust the brightness of the white areas. As the picture becomes dim,

it looks more natural.

NOTE: The White Peaking option is not available when “Presentation” is selected

in “Base Setting”.

[Brightness]

Adjusts the brightness level or the back raster intensity.

[Contrast]

Adjusts the intensity of the image according to the incoming signal.

Enabling Auto Adjust [Auto Adjust]

[Sharpness]

Controls the detail of the image for Video.

When “Auto Adjust” is set to “On”, the projector automatically determines

the best resolution for the current RGB input signal to project an image

using NEC’s Advanced AccuBlend Intelligent Pixel Blending Technology.

The image can be automatically adjusted for position and stability;

“Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.

[Color]

Increases or decreases the color saturation level (not valid for RGB).

[Hue]

On .................. Automatically adjusts image “Horizontal Position”, “Ver-

tical Position”, “Clock” and “Phase”.

Varies the color level from +/- green to +/-blue. The red level is used as

reference.This adjustment is only valid for Video and Component inputs

(not valid for RGB).

Off .................. User can adjust the image display functions (“Horizon-

tal Position”, “Vertical Position”, “Clock” and “Phase”)

manually.

NOTE: Some Picture items cannot be available depending on the input signal.

Adjusting Position/Clock (when Auto Adjust is off)

Input signal

RGB

(Computer)

Component

(Computer)

Video and S-Video

Brightness Contrast Sharpness Color

Hue

This allows you to manually adjust the image horizontally and vertically,

and adjust Clock and Phase.

Yes

Yes*¹

Yes

[Horizontal/Vertical]

Adjusts the image location horizontally and vertically.

This adjustment is made automatically when the Auto Adjust is turned

on.

Yes*²

Yes: Available No: Not available

[Clock]

Available on DVD (15 kHz), but not available on HDTV, 525p (480p)

and 750p (720p).

Use this item with the “Auto Adjust off” to fine tune the computer im-

age or to remove any vertical banding that might appear.This function

adjusts the clock frequencies that eliminate the horizontal banding in

the image.This adjustment may be necessary when you connect your

computer for the first time.This adjustment is made automatically when

the Auto Adjust is turned on.

Available on NTSC only.

Correcting Vertical Keystone Distortion [Keystone]

Corrects vertical keystone distortion.

[Phase]

Use this item to adjust the clock phase or to reduce video noise, dot

interference or cross talk. (This is evident when part of your image

appears to be shimmering.)

Auto ............... Corrects vertical keystone distortion automatically.See

page E-20.

Manual ........... Allows you to manually correct vertical keystone dis-

tortion.

Use “Phase” only after the “Clock” is complete.

This adjustment is made automatically when the Auto Adjust is turned

on.

Manual (Save) This option enables you to save your current keystone

correction settings. The settings are saved when you

turn off the projector.

Turning On Noise Reduction [Noise Reduction]

Reduces video noise.

When you select “Manual” or “Manual (Save)“, you can correct keystone

distortion using the Keystone slide bar.

NOTE: The lower the Noise Reduction level, the better the image quality by way

of higher video bandwidth.

Turning On Flicker Reduction [Flicker Reduction]

Reduces flicker which can occur in an interlaced signal.

NOTE: When the Flicker Reduction is ON, jagged lines can be visible depending

on the signal. In that case, select OFF.

E-32

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

[Setup1]

[Setup2]

Selecting Lamp Mode [Lamp Mode]

Enabling Power Management [Power Management]

When this option is on and there is no input for five minutes or more,

the projector will automatically turn itself off.

This feature enables you to select two brightness modes of the lamp:

Normal and Eco modes. The lamp life can be extended by using the

Eco mode.

Normal Mode ... This is the default setting (100% Brightness).

Enabling Auto Start [Auto Start]

Turns the projector on automatically when the power cable is inserted

into an active power outlet.

This eliminates the need to always use the POWER (ON/STAND BY)

button on the projector cabinet or the POWER OFF button on the re-

mote control.

Eco Mode ...... Select this mode to increase the lamp life (80% Bright-

ness).

NOTE: Thermometer symbol indicates the lamp mode is forcibly set to Eco

mode because the internal temperature is too high.

Enabling High Speed Fan Mode [Fan Mode]

This option allows you to select two modes for fan speed: High mode

and Auto mode.

Selecting Menu Language [Language]

You can choose one of 20 languages for on-screen instructions.

Selecting Menu Color [Menu Color Select]

You can choose between two color modes for menu color: color and

monochrome.

High ............... The built-in fans run at a fixed high speed.

Auto ............... The built-in fans automatically run at a variable speed

according to the internal temperature.

Selecting Menu Display Time [Menu Display Time]

This option allows you to select how long the projector waits after the

last touch of a button to turn off the menu.

The preset choices are “Manual”, “Auto 5 sec”, “Auto 15 sec”, and

“Auto 45 sec”. The “Auto 45 sec” is the factory preset.

When you wish to cool down the temperature inside the projector

quickly, select “High”.

NOTE: Select High Speed Fan mode if you continue to use the projector for

consecutive days.

Selecting a Color or Logo for Background [Background]

Use this feature to display a black/ blue screen or logo when no signal

is available.

Selecting Signal Format [Signal Select]

Allows you to choose “RGB” for an RGB source such as a computer,

or “Component” for a component video source such as a DVD player.

Normally select “RGB/Component” and the projector automatically

detects a component signal. However there may be some component

signals that the projector is unable to detect. If this is the case, select

“Component”. Select “Scart” for the European Scart.

Selecting Projector Orientation [Orientation]

This sets the orientation of the image for your type of application. The

options are:

desktop front projection, ceiling rear projection, desktop rear projec-

tion, and ceiling front projection.

Disabling the Cabinet Buttons [Cabinet Button]

This option turns on or off the Cabinet Button Lock function.

This feature enables you to select composite video standards manu-

ally. Normally select “Auto”.

NOTE:

When you select the video standard for Video and S-Video, select the

video standard from the pull-down menu.

This must be done for Video and S-Video respectively.

* This Cabinet Button Lock does not affect the remote control functions.

* When the cabinet buttons are locked, pressing and holding the MENU button

for about 10 seconds will change the setting to unlock.

* Key symbol

indicates the Cabinet Button is locked.

Enabling Security function [Security]

This option allows you to prevent the projector from being used by

unauthorized individuals.

See page E-24 for details.

Selecting Display Orientation [Portrait]

This allows you to select the projector's display orientation when you

display an image in portrait mode with the projector on its side. See

page E-13. You can rotate the projected image 0° or 180° clockwise

depending on your PC.

The default setting is 180°.

E-33

Download from Www.Somanuals.com. All Manuals Search And Download.

USING ON-SCREEN MENU

Information

Default

Displays the status of the current signal and lamp usage. This item has

four pages. The information included is as follows:

Returning to Factory Default [Factory Default]

The Factory Default feature allows you to change adjustments and set-

ting to the factory preset for source except the following:

[Page 1]

[Page 3]

Source Index

Horizontal Frequency Lamp Hour Meter (H)

Vertical Frequency

Sync Polarity

Remaining Lamp Time (%)*

Resets the adjustments for the current signal to the factory preset levels.

The items that can be reset are:Brightness, Contrast, Color, Hue, Sharp-

ness, Aspect Ratio, Horizontal Position, Vertical Position, Clock, Phase

and Picture Management.

Projector Usage

[Page 2]

[Page 4]

Signal Type

Video Type

Sync Type

Interlace

Version (BIOS/Firmware/Data/GUI)

Reset all the adjustments and settings for all the signals to the factory

preset.

The items can be reset except Language, Security, Remaining Lamp

Time, Lamp Hour Meter and Projector Usage. To reset the lamp usage

time, see “Clear Lamp Hour Meter” .

* The progress indicator shows the percentage of remaining lamp life.

The value informs you of the amount of lamp usage.When the remain-

ing lamp time reaches 0, the Remaining Lamp Time bar indicator

changes from 0% to 100 Hours and starts counting down.

If the remaining lamp time reaches 0 hours, the projector will not turn

on regardless of whether the lamp mode is set to Normal or Eco.

Clearing Lamp Hour Meter [Clear Lamp Hour Meter]

Resets the lamp clock back to zero.Selecting this option displays submenu

for a confirmation.

NOTE: The projector will turn off and go into standby mode after 1600 hours (up

to 2100 hours in Eco mode) of service. If this happens, press the “HELP” button

on the remote control for ten seconds to reset the lamp clock back to zero. Do this

only after replacing the lamp.

E-34

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

This section describes the simple maintenance procedures you should

follow to replace the lamp and clean the filter.

3. Insert a new lamp housing until the lamp housing is plugged into the

socket.

CAUTION

Replacing the Lamp

Do not use a lamp other than the NEC replacement lamp (LT70LP).

Order this from your NEC dealer.

After your lamp has been operating for 1500 hours (up to 2000 hours in

Eco mode) or longer, the LAMP indicator in the cabinet will blink red and

the message will appear. Even though the lamp may still be working,

replace it at 1500 (up to 2000 hours in Eco mode) hours to maintain

optimal projector performance.

Secure it in place with the screw.

Be sure to tighten the screw.

CAUTION

•

DO NOTTOUCHTHE LAMP immediately after it has been used. It

will be extremely hot.Turn the projector off, wait 60 seconds, and

then unplug the power cable. Allow at least one hour for the lamp

to cool before handling.

•

DO NOT REMOVE ANY SCREWS except the lamp cover screw

and the lamp case screw.You could receive an electric shock.

The projector will turn off and go into stand by mode after 1600

(up to 2100 hours in Eco mode) hours of service. If this happens,

be sure to replace the lamp. If you continue to use the lamp after

1500 hours (up to 2000 hours in Eco mode) of use, the lamp bulb

may shatter, and pieces of glass may be scattered in the lamp

case. Do not touch them as the pieces of glass may cause injury.

If this happens, contact your NEC dealer for lamp replacement.

4. Reattach the lamp cover.

Slide the lamp cover back until it snaps into place.

To replace the lamp:

NOTE: The replacement lamp comes with a flat-blade screwdriver. Use the screw-

driver to remove the lamp cover and lamp housing.

Tighten the lamp cover screw.

Be sure to tighten the screw.

1. Loosen the lamp cover screw until the screwdriver goes into a free-

wheeling condition.Press firmly and slide the lamp cover off.The lamp

cover screw is not removable.

Catch

LAMP

STATUS

STATU

POWER

ON/STAND BY

ON/STA

ENTER

5. After you install a new lamp, select the menu → [Default] → [Clear

Lamp Hour Meter] to reset the lamp usage hours.

NOTE: When the lamp exceeds 1600 hours (up to 2100 hours in Eco mode) of

service, the projector cannot turn on and the menu is not displayed. If this

happens, press the Help button on the remote control for a minimum of 10

seconds while in standby mode. When the lamp time clock is reset to zero, the

LAMP indicator goes out.

2. Loosen the screw securing the lamp housing until the screwdriver goes

into a freewheeling condition. The screw is not removable.

Remove the lamp housing by pulling out the handle.

NOTE: There is an interlock on this case to prevent the risk of electrical shock.

Do not attempt to circumvent this interlock.

Interlock

LAMP

STATUS

POWER

ON/STAND BY

E-35

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

Cleaning the Cabinet and the Lens

AUDIO IN

S-VIDEO IN

VIDEO IN

COMPUTER

1. Turn off the projector before cleaning.

2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use

a mild detergent. Never use strong detergents or solvents such as

alcohol or thinner.

3. Use a blower or lens paper to clean the lens, and be careful not to

scratch or mar the lens.

S O U R C E

/ S

E-36

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

This section helps you resolve problems you may encounter while setting up or using the projector.

Power Indicator (POWER)

Indicator Condition

Projector Condition

Note

Off

The main power is not supplied

–

Blinking light

Steady light

Green

0.5 sec ON,

0.5 sec OFF

0.5 sec ON,

0.5 sec OFF

The projector is getting ready Wait for a moment.

to turn on.

Orange

The projector is cooling down. Wait for a moment.

Green

The projector is turned on.

The projector is in Standby.

–

Orange

Status Indicator (STATUS)

Indicator Condition

Off

Projector Condition

Note

Normal

–

Blinking light

Red

1 cycle (0.5 sec ON, Lamp cover error or lamp Replace the lamp cover or

2.5 sec OFF)

housing error

lamp housing correctly.

The projector is overheated.

Move the projector to a cooler

location.

2 cycle (0.5 sec ON, Temperature error

0.5 sec OFF)

3 cycle (0.5 sec ON, Power Failure

0.5 sec OFF)

Power supply unit will not work cor-

rectly. Contact your dealer.

4 cycle (0.5 sec ON, Fan error

0.5 sec OFF)

Fans will not work correctly.

6 cycle (0.5 sec ON, Lamp error

0.5 sec OFF)

Lamp fails to light. Wait a full

minute and then turn on again.

The projector is re-firing.

Green

Re-firing the lamp

Steady light

Orange

Cabinet button is locked

You have pressed cabinet but-

ton when Cabinet Button is

locked.

Lamp Indicator (LAMP)

Indicator Condition

Projector Condition

Note

Off

Normal

–

Blinking light

Steady light

Red

Lamp has reached its end of Replace the lamp.

life. Lamp replacement mes-

sage will be displayed.

Red

Lamp has been used beyond Replace the lamp.

its limit. The projector will not

turn on until the lamp is re-

placed.

Green

Lamp mode is set to Eco mode

–

E-37

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Common Problems & Solutions

Problem

CheckThese Items

Does not turn on

•

Check that the power cable is plugged in and that the power button on the projector cabinet or the remote

control is on. See page E- 17.

Check to see if the Cabinet Button Lock function is enabled.If this function is enabled, cancel it by pressing and

holding the MENU button on the cabinet for a minimum of 10 seconds or using the menu with the remote

control. See page E-33.

•

Ensure that the lamp cover or lamp housing is installed correctly. See page E-35.

Check to see if the projector has overheated or the lamp has reached the end of its usable life. If there is

insufficient ventilation around the projector or if the room where you’re presenting is particularly warm, move

the projector to a cooler location.

No picture

•

Use the COMPUTER, VIDEO or S-VIDEO button on the remote control or the SOURCE button on the cabinet to

select your source (Computer, Video or S-Video). See page E-19.

•

Ensure your cables are connected properly.

Use menus to adjust the brightness and contrast. See page E-32.

Open the lens shutter. See page E-18.

Reset the settings or adjustments to factory preset levels using “Factory Default” in the menu. See page E-34.

Enter your registered keyword if the Security function is enabled. See page E-24.

When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning

on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook

PC is turned on after connecting with the projector.

•

If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver

or power management software.

If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER

button again to resume.

Image isn’t square to the

screen

•

Reposition the projector to improve its angle to the screen. See page E-19.

Use the Keystone correction function to correct the trapezoid distortion. See page E-20.

Picture is blurred

•

Adjust the focus. See page E-20.

Reposition the projector to improve its angle to the screen. See page E-19.

Ensure that the distance between the projector and screen is within the adjustment range of the lens. See page

E-11.

•

Condensation may form on the lens if the projector is cold, brought into a warm place and is then turned on.

Should this happen, let the projector stand until there is no condensation on the lens.

Image is scrolling verti-

cally, horizontally or

both

Use the COMPUTER, VIDEO or S-VIDEO button on the remote control or the SOURCE button on the cabinet to

select the source you want to input. See page E-19.

Remote control does

not work

•

Install new batteries. See page E-9.

Make sure there are no obstacles between you and the projector.

Stand within 22 feet (7 m) of the projector. See page E-9.

Indicator is lit or blink-

ing

•

See the Power/Status/Lamp Indicator on page E-37.

Cross color in RGB

mode

If Auto Adjust is off, turn it on or adjust the image manually with Horizontal / Vertical / Clock / Phase in the

menu. See page E-32.

E-38

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

This section provides technical information about the LT170 Projector's performance

Model Number

LT170

Optical

DMD

Single Chip Digital Micromirror Device (DMD)

1024

768 pixels native*, up to UXGA with Advanced AccuBlend

Manual zoom and focus: F=2.0 (Wide)-2.13 (Tele), f=25.7 - 28.3mm

145W

Resolution

Lens

Lamp

Image Size

Projection Distance

Projection Angle

Keystone Correction

30 - 200 inches (0.8 - 5.1 m) diagonal

3.51 - 26.67 ft / 1.07 (Wide) - 8.13 m (Tele)

Tele : 8.6°/ Wide : 9.5°

+/- 30 degrees electronic (auto)

Electrical

Inputs

1 RGB/Component (D-Sub 15 Pin), 1 S-Video (DIN 4 Pin), 1 Video (RCA), 1 Stereo Mini Audio

Video Compatibility

Scan Rate

NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV: 1080i, 1080i/50Hz, 720p, 576p, 480p, 480i/60Hz

Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 120 Hz

RGB: 100 MHz (-3dB)

Video Bandwidth

Color Reproduction

Horizontal Resolution

16.7 million colors simultaneously, Full color

NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 540 TV lines

SECAM: 300 TV lines

YCbCr: 540 TV lines

RGB: 1024 dots (H)

768 dots (V)

RS232, IR

External Control

Sync Compatibility

Built-in Speaker

Power Requirement

Input Current

Separate Sync / Composite Sync / Sync on G

0.5W (monaural)

100 - 240V AC, 50 / 60 Hz

2A (Max.)

Power Consumption

196W(4W in Standby mode)

Mechanical

Installation Orientation

Dimensions

Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear

4.8" (W)

3.3" (H)

11.0" (D)

123mm (W)

85mm (H)

280mm (D)

(not including protrusions)

Net Weight

3.9 lbs / 1.8 kg

Environmental Considerations

Operational Temperatures : 41° to 95°F (5° to 35°C), 20% to 80% humidity (non-condensing)

Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

UL Approved (UL 60950, CSA 60950)

Regulations

Meets DOC Canada Class B requirements

Meets FCC Class B requirements

Meets AS/NZS CISPR 22 Class B

Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)

Meets Low Voltage Directive (EN60950, TUV GS Approved)

For additional information visit:

US : http://www.necvisualsystems.com

Europe : http://www.nec-europe.com/

Global : http://www.nec-pj.com/

* Effective pixels are more than 99.99%.

The specifications are subject to change without notice.

E-39

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

Cabinet Dimensions

110 (4.33")

O N / S T A N D B Y

P O W E R

S T A T U S

L A M P

E N T E R

S O U R C E

M E N U

Z O O M

P U S H

F O C U S

123 (4.84")

2.8 (0.11")

Lens center

Unit = mm (inch)

Pin Assignments of D-Sub COMPUTER Input Connector

Mini D-Sub 15 Pin Connector

Pin No.

RGB Signal (Analog)

YCbCr Signal

Red

15 14 13 12 11

Green or Sync on Green

Blue

Signal Level

Video signal : 0.7Vp-p (Analog)

Sync signal : TTL level

Ground

Red Ground

Cr Ground

Y Ground

Cb Ground

Green Ground

Blue Ground

No Connection

Sync Signal Ground

Scart Sync

Bi-directional DATA (SDA)

Horizontal Sync or Composite Sync

Vertical Sync

Data Clock

E-40

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

Compatible Input Signal List

Signal

Resolution

( Dots )

–

Frequency H.

( kHz )

15.734

Refresh Rate

( Hz )

NTSC

PAL

–

15.625

15.734

15.625

31.47

34.97

PAL60

SECAM

VESA

–

640

480

640

480

640

480

640

480

640

480

640

480

640

480

640

480

640

480

720

350

720

400

720

350

720

400

800

600

800

600

800

600

800

600

800

600

832

624

1024

768

1024

768

1024

768

1024

768

1024

768

1024

768

1152

864

1152

870

1152

900

1152

900

1280

960

1280

1024

1280

1024

1280

1024

1280

1024

1280

1024

1280

1024

1400

1050

–

59.94

IBM

MAC

66.67

72.81

MAC

VESA

37.86

37.5

VESA

IBM

39.375

43.269

31.469

37.927

39.44

35.16

37.879

48.077

46.88

53.674

49.725

35.5

VESA

85.01

70.09

85.04

87.85

56.25

60.32

72.19

IBM

VESA

IBM

VESA

85.06

74.55

43 Interlaced

MAC

VESA

48.363

56.476

60.241

60.023

68.677

67.5

VESA

70.07

74.93

75.03

MAC

VESA

MAC

68.681

61.796

71.736

75.06

65.95

76.05

SUN

SGI

VESA

63.981

69.89

78.125

81.13

79.976

91.146

–

60.02

65.18

72.01

76.11

75.03

85.02

–

MAC

SUN

VESA

SXGA+

SDTV(576i)(625i)

SDTV(576p)(625p)

HDTV (1080i)(1125i)

HDTV (720p)(750p)

SDTV (480p)(525p)

VESA

15.6

–

31.5

1920

1080

1920

1080

1280

720

–

33.75

28.125

60 Interlace

50 Interlace

60 Progressive

59.94 Progressive

31.47

75.0

1600

1200

1600

1200

1600

1200

1600

1200

–

VESA

81.25

87.5

VESA

93.75

15.734

15.625

DVD YCbCr

59.94 Interlaced

50 Interlaced

–

# : Images in above flagged with # are compressed with Advanced AccuBlend.

NOTE: Some composite sync signals may not be displayed correctly.

Signals other than those specified in the table above may not be displayed correctly. If this should happen, change

the refresh rate or resolution on your PC. Refer to Display Properties help section of your PC for procedures.

UXGA (1600

1200) is supported for separate sync signal only.

E-41

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

6) Problems or damage caused by expendable supplies or devices

connected to the product other than those designated by NEC.

TravelCare Guide

7) Problems caused by natural consumption, wear or deterioration

of parts under normal usage conditions.

TravelCare - a service for international travelers

This product is eligible for "TravelCare", NEC's unique international war-

ranty.

Please note that TravelCare coverage differs in part from coverage un-

der the warranty included with the product.

8) Problems or damage to lamps and other expendable supplies,

included parts or optional parts.

9) Other conditions stipulated in the warranty included with the prod-

uct also apply.

Services offered with TravelCare

This warranty allows customers to receive service on their product at

the NEC and NEC-designated service stations in the countries listed

herein when temporarily traveling internationally for business or plea-

sure.

NOTE: The product can be used overseas with voltages of 100 to 120V and 200

to 240V by using a power cable suited for the standards and power source volt-

age of the country in which the product is being used.

For details on services offered by the different service stations, please

refer to the "List of TravelCare Outlets" below.

List of TravelCare Outlets

This list applies as of June 1, 2002.

For the most up-to-date information, please refer to the websites of the

service stations in the various countries on the List of TravelCare Out-

lets or to the NEC website at http://www.nec-pj.com.

1 Repair services

The product will be repaired and delivered within 10 business days,

not including shipping time.

During the term of warranty, the cost of maintenance parts, labor

costs for repairs and shipping costs within the service station's cov-

erage area are covered by the warranty.

In Europe

NEC Europe, Ltd. / European Technical Centre

Address:

Telephone:

Fax Line:

Email Address:

WEB Address:

Unit G, Stafford Park 12, Telford TF3 3BJ, U.K.

+44 1952 237000

+44 1952 237006

[email protected]

http://www.neceur.com

2 Replacement product rental service

If the customer desires, he or she can rent a replacement product

while the original product is being repaired.

Fee: US$200 for 12 days

This fee must be paid at the local service station in cash or credit

card.

The $200 rental fee is non-refundable even if the customer rents it

less than 12 days before returning.

The replacement product will be delivered within 3 business days.

If the customer did not return the replacement product within 12 days,

the customer will be charged the price of the unit.

If the customer returned the replacement product in a faulty or dam-

aged condition, the repair cost will be charged to the customer.

Note that this service is not offered in all countries and regions. Please

refer to the "List of TravelCare Outlets".

(Regions Covered)

EU:

Austria*, Belgium*, Denmark*, Finland*, France*, Germany*,

Greece*, Ireland*, Italy*, Luxembourg*, The Netherlands*,

Portugal*, Spain*, Sweden* and the United Kingdom*

Norway*, Iceland and Liechtenstein

EEA:

In North America

NEC Solutions (America), Inc.

Address:

1250 Arlington Heights Road, Itasca,

Illinois 60143, U.S.A.

+1 800 836 0655

+1 800 356 2415

[email protected]

http://www.necvisualsystems.com

Telephone:

Fax Line:

Email Address:

WEB Address:

In addition, this replacement product rental service is not offered af-

ter the product's warranty has expired.

Term of warranty

(Regions Covered)

U.S.A. *, Canada*

a. Upon presentation of the warranty or receipt received upon pur-

chase:

In Oceania

NEC Australia Pty., Ltd.

Address: New South Wales;

184 Milperra Road, Reversby 2212

Valid for the term indicated on the warranty or the normal term of

warranty for the country of purchase.

b. When only the product is brought in:

Victoria;

Valid for a period of within 14 months of the date of manufacture

indicated by the serial number attached to the product.

480 Princess Hwy Noble Park 3174

South Australia;

84A Richmond Road, Keswick 5035

Queensland;

116 Ipswich Road, Woollongabba 4102

Western Australia;

45 Sarich Court Osborne Park 6017

131 632 (from domestic)

2 When a product whose term of warranty is expired is brought in:

Repairs will be offered for a fee. In this case the customer is not

eligible for the replacement product rental service.

3 In the following cases, repairs may be charged, even if the product's

warranty is still in effect:

Telephone:

1) If the term of warranty, model name, serial number and name of

the store of purchase are not indicated on the warranty or have

been altered.

+61 8 8375 5706 (from overseas)

+61 8 8375 5757

Fax Line:

Email Address:

WEB Address:

[email protected]

http://www.nec.com.au

2) Problems or damage caused by dropping or shocks during ship-

ment or movement by the customer or by improper handling by

the customers.

(Regions Covered)

Australia*, New Zealand

3) Problems or damage caused by improper usage or unwarrant-

able alterations or repairs by the customer.

4) Problems or damage caused by fire, salt damage, gas damage,

earthquakes, lightning damage, storm or flood damage or other

natural disasters or such external factors as dust, cigarette

smoke, abnormal voltage, etc.

5) Problems or damage caused by use in hot or humid places, in

vehicles, boats or ships, etc.

E-42

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

In Asia and Middle East

NEC Viewtechnology, Ltd.

ABBA Electronics L.L.C.

Address:

Tariq Bin Ziyad Road, P.O.Box 327, Dubai,

United Arab Emirates

+971 4 371800

Address:

686-1, Nishioi, Oi-Machi, Ashigarakami-Gun,

Kanagawa 258-0017, Japan

+81 465 85 2369

Telephone:

Fax Line:

Telephone:

+971 4 364283

Fax Line:

+81 465 85 2393

Email Address:

[email protected]

Email Address:

WEB Address:

[email protected]

http://www.nec-pj.com

(Regions Covered)

United Arab Emirates

(Regions Covered)

Japan*

Samir Photographic Supplies

Address:

P.O.Box 599, Jeddah 21421, Saudi Arabia

NEC Hong Kong Ltd.

Address:

Telephone:

Fax Line:

Email Address:

+966 2 6828219

+966 2 6830820

[email protected]

11th Floor, Tower B, New Mandarin Plaza, 14

Science Museum Road,

Tsim Sha Tsui East, Kowloon, Hong Kong

+852 2369 0335

+852 2795 6618

Telephone:

Fax Line:

(Regions Covered)

Saudi Arabia

Email Address:

WEB Address:

[email protected]

http://www.nec.com.hk

NOTE: In countries designated with an asterisk(*), replacement product rental

service are offered.

(Regions Covered)

Hong Kong

NEC Taiwan Ltd.

Address:

7F, No.167, SEC.2, Nan King East Road, Taipei,

Taiwan, R.O.C.

Telephone:

+886 2 8500 1734

Fax Line:

+886 2 8500 1420

Email Address:

WEB Address:

[email protected]

http://www.nec.com.tw

(Regions Covered)

Taiwan

NEC Singapore Pte. Ltd

Address:

401 Commonwealth Drive, #07-02, Haw Par

Technocentre, Singapore 149598

+65 6 273 8333

Telephone:

Fax Line:

+65 6 274 2226

Email Address:

WEB Address:

[email protected]

http://www.nec.com.sg

(Regions Covered)

Singapore

Hyosung Data System, Ltd.

Address:

7th Floor, Cheongdam Building, 52,

Cheongdam-Dong,

Kangnam-Ku, Seoul, Korea 135-100

+82 2 510 0234

+82 2 540 3590

Telephone:

Fax Line:

Email Address:

[email protected]

(Regions Covered)

South Korea

Lenso Communication Co., Ltd.

Address:

292 Lenso House 4, 1st Floor, Srinakarin Road,

Huamark, Bangkapi, Bangkok 10240, Thailand

+66 2 375 2425

Telephone:

Fax Line:

+66 2 375 2434

Email Address:

WEB Address:

[email protected]

http://www.lenso.com

(Regions Covered)

Thailand

E-43

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

P-1/

Date:

TO: NEC or NEC's Authorized Service Station:

FM:

(Company & Name with signature)

Dear Sir (s),

I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your

following conditions, and also the Service fee will be charged to my credit card account, if I don't return the Loan units within the

specified period. I also confirm following information is correct. Regards.

Application Sheet for TravelCare Service Program

Country,

product purchased :

User's Company Name :

User's Company Address :

Phone No., Fax No. :

User's Name :

User's Address :

Phone No., Fax No. :

Local Contact office :

Local Contact office Address :

Phone No., Fax No. :

User's Model Name :

Date of Purchase :

Serial No. on cabinet :

Problem of units per User :

Required Service :

(1) Repair and Return

(1) Credit Card

(2) Loan unit

Requested period of Loan unit :

Payment method :

(2) Travelers Cheque

(3) Cash

In Case of Credit Card :

Card No. w/Valid Date :

E-44

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

5. Loan Service Charges and Conditions:

Upon acceptance of this NEC Projector, Customer agrees to assume

liability for this loan unit.

Condition of your TravelCare Service Program

Enduser is requested to understand following conditions of TravelCare

Service Program and complete the necessary information on the

application sheet.

The current cost of use of this loan unit is $200.00 USD for 12 calendar

days.

1. Service Options:

There are 3 types of "Service" available. Enduser has to understand

following condition and is required to fill in the Application Sheet.

If Customer does not return the unit within the 12 calendar days, Cus-

tomer will be charged the next highest cost up to and including the full

list price to Credit Cards, which price will be informed by NEC Autho-

rized Service Stations. Please see the attached listing of contacts for

each country to arrange for pickup of the loan unit.

1) Repair and Return:

The 'Faulty unit' is sent or collected from the customer. It is repaired

and returned within 10 days to the customer, excluding transport time.

If you return to their country of origin with the loan unit, you will be

charged additional freight to return the unit to the loaning country.

There may have a case, repair and return can't be done by NEC

Authorized Service Station, because of shortage of spare parts due

to same model is not sold in the territory.

Thank you for your understanding of this program.

2) Repair and Return with Loan: (This service is limited to some Ser-

vice Stations)

This service is offered to the Enduser, who cannot wait until their unit

is repaired.

The customer can borrow a unit for $200 up to 12 days. Customer

then sends in inoperable unit to nearest NEC Authorized Service

Station for service. In order to prevent collection problem, Enduser is

required to fill in Application Sheet.

Enduser needs to confirm the availability of the Service to NEC Au-

thorized Service Stations.

3) Loan Only:

For this service, NEC Authorized Service Station supplies the cus-

tomer with a loan unit for US$200 up to 12 days.Customer keeps the

inoperable unit and when customer returns home, customer arranges

to have the projector serviced in the home country.

2. Warranty Exclusions:

This program does not apply if the Projector's serial number has been

defaced, modified or removed.

If, in the judgement of NEC Authorized Service Station or its agent the

defects or failures result from any cause other than fair wear and tear or

NEC neglect, or fault including the following without limitation:

1) Accidents, transportation, neglect, misuse, abuse, water, dust, smoke

or default of or by the Customer its employees or agents or any third

party;

2) Failure or fluctuation of electrical power, electrical circuitry, air condi-

tioning, humidity control or other environmental conditions such as

use it in smoking area;

3) Any fault in the attachments or associated products or components

(whether or not supplied by NEC or its agents which do not form part

of the Product covered by this warranty);

4) Any act of God, fire, flood, war, act of violence or any similar occur-

rence;

5) Any attempt by any person other than any person authorized by NEC

to adjust, modify, repair, install or service the product.

6) Any Cross-border charges such as, duty, insurance, tax etc.

3. Charges for Warranty Exclusions and Out of Warranty Case:

In case faulty unit is under warranty exclusions case or under Out of

Warranty period, NEC Authorized Service Station will Inform estimation

of actual service cost to the Enduser with reason.

4. Dead on Arrival (DOA):

Enduser must take this issue up with their original supplier in the coun-

try of purchase.

NEC Authorized Service Station will repair the DOA unit as a Warranty

repair, but will not exchange DOA unit with new units.

Ver. 1 9/03

E-45

Download from Www.Somanuals.com. All Manuals Search And Download.

Milwaukee Nail Gun 2458 20 User Manual
Murphy Network Card PVA20 User Manual
Nautique Boat 100077 User Manual
Nilfisk ALTO Vacuum Cleaner MAXXI WD 3 User Manual
NordicTrack Home Gym 831298650 User Manual
Onkyo DVD Player DV CP702 User Manual
Panamax Surge Protector MX5102 User Manual
Panasonic Car Stereo System CQ 5251JU User Manual
Panasonic Projector Accessories ETLAD35 User Manual
Patton electronic Network Cables SN DTA User Manual