Onkyo DVD Player DV CP702 User Manual

DV-CP702 DVD Changer Page 1 Tuesday, February 10, 2004 10:12 AM

Contents

Important Safety Instructions...........3

DVD Changer

Precautions .......................................4

Introduction .......................................6

Controls & Connectors ...................10

Before Using the DV-CP702 ...........15

Connecting the DV-CP702 ..............16

DV-CP702

Instruction Manual

Connecting

-compatible AV

Components .................................19

Powering Up & Setting Up the

DV-CP702 .......................................20

Basic Playback ................................21

Advanced Playback ........................31

Conﬁguring the DV-CP702 .............38

Troubleshooting ..............................45

Speciﬁcations .................................47

Thank you for purchasing an Onkyo DV-CP702 DVD

Changer. Read this manual carefully before using your

new DVD Changer. A good understanding of its features

and operation will allow you to achieve optimum perfor-

mance and enjoyment.

Keep this manual for future reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 3 Tuesday, February 10, 2004 10:12 AM

WARNING:

WARNING

AVIS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat reg-

isters, stoves, or other apparatus (including ampliﬁers) that pro-

duce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are pro-

vided for your safety. If the provided plug does not ﬁt into your

outlet, consult an electrician for replacement of the obsolete

outlet.

10. Protect the power cord from being walked on or pinched partic-

ularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

15. Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to

qualiﬁed service personnel under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the

apparatus,

C. If the apparatus has been exposed to rain or water,

D. If the apparatus does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualiﬁed technician to restore

the apparatus to its normal operation,

E. If the apparatus has been dropped or damaged in any way,

and

F. When the apparatus exhibits a distinct change in perfor-

mance this indicates a need for service.

16. Object and Liquid Entry

Never push objects of any kind into the apparatus through

openings as they may touch dangerous voltage points or short-

out parts that could result in a ﬁre or electric shock.

The apparatus shall not be exposed to dripping or splashing and

no objects ﬁlled with liquids, such as vases shall be placed on

the apparatus.

11. Only use attachments/accessories speciﬁed by the manufac-

turer.

12. Use only with the cart, stand, tripod,

Don’t put candles or other burning objects on top of this unit.

PORTABLE CART WARNING

17. Batteries

bracket, or table speciﬁed by the manu-

facturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

Always consider the environmental issues and follow local reg-

ulations when disposing of batteries.

18. If you install the apparatus in a built-in installation, such as a

bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm

(4") at the rear. The rear edge of the shelf or board above the

apparatus shall be set 10 cm (4") away from the rear panel or

wall, creating a ﬂue-like gap for warm air to escape.

13. Unplug this apparatus during lightning

S3125A

storms or when unused for long periods

of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 4 Tuesday, February 10, 2004 10:12 AM

Precautions

FCC INFORMATION FOR USER

CAUTION:

The user changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority

to operate the equipment.

DANGER:

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPENAND INTERLOCK FAILED OR DEFEATED. DO NOT

STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZESA LASER. USE OF CONTROLS

OR ADJUSTMENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

NOTE:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

This unit contains a semiconductor laser system and is classiﬁed

as a “CLASS 1 LASER PRODUCT.” So, to use this model prop-

erly, read this Instruction Manual carefully. In case of any trou-

ble, please contact the store where you purchased the unit. To

prevent exposure to the laser beam, do not try to open the enclo-

sure.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

In some cases, this label is located on the rear panel. It indicates

that:

1. This unit is a CLASS 1 LASER PRODUCT and employs a

laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualiﬁed personnel.

For Canadian model

For models having a power cord with a polarized plug:

For U.S. model

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

The laser is covered by a housing which prevents exposure dur-

ing operation or maintenance. However, this product is classi-

ﬁed as a Laser Product by CDRH (Center for Devices and

Radiological Health) which is a department of the Food and

Drug Administration.

NOTE:This Class B digital apparatus complies with Canadian

ICES-003.

According to their regulations 21 CFR section 1002.30, all man-

ufactures who sell Laser Products must maintain records of writ-

ten communications between the manufacturer, dealers and

customers concerning radiation safety. If you have any com-

plaints about instructions or explanations affecting the use of

this product, please feel free to write to the address on the back

page of this manual. When you write us, please include the

model number and serial number of your unit.

Modèle canadien

Sur les modèles dont la ﬁche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-

TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA

PRISE ET POUSSER JUSQU’AU FOND.

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA

CLASSE B EST CONFORME À LA NORME NMB-003 DU

CANADA.

In compliance with Federal Regulations, the certiﬁcation, iden-

tiﬁcation and the period of manufacture are indicated on the rear

panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 5 Tuesday, February 10, 2004 10:12 AM

Precautions—Continued

1. Region Numbers

8. Care

The DVD standard uses region numbers to control how discs can

be played around the world, the world being divided into six

regions. This unit will only play DVD discs that match its region

Occasionally, you should dust this unit all over with a soft cloth.

For stubborn stains, use a soft cloth dampened with a weak solu-

tion of mild detergent and water. Dry the unit immediately after-

wards with a clean cloth. Do not use abrasive cloths, thinners,

alcohol, or other chemical solvents, because they may damage

the ﬁnish or remove the panel lettering.

number, which can be found on its rear panel (e.g.,

2. About this Manual

This manual explains how to use all of this unit’s functions.

Although the DVD standard offers many special features, not all

discs use them all, so depending on the disc being played, this

unit may not respond to certain functions. See the disc’s sleeve

notes for supported features.

9. Handling Notes

• If you need to transport this unit, use the original packaging to

pack it how it was when you originally bought it.

• Do not use volatile liquids, such as insect sprays, near this

unit. Do not leave rubber or plastic items on this unit for a long

time, because they may leave marks on the case.

• This unit’s top and rear panels may get warm after prolonged

use. This is normal.

When you attempt to use a DVD feature that is not

available, this logo may appear onscreen, indicating

that the feature is not supported by the current disc or

this unit.

• When you’ve ﬁnished using this unit, remove all discs and

turn off the power.

3. Warranty

• If you do not use this unit for a long time, it may not work

properly the next time you turn it on, so be sure to use it occa-

sionally.

If you need to use the warranty, please provide the serial number

printed on this unit’s rear panel.

4. Recording Copyright

Unless it’s for personal use only, recording copyrighted material

is illegal without the permission of the copyright holder.

10.To Obtain a Clear Picture

This unit is a high-tech, precision device. If the lens on the opti-

cal pickup, or the disc drive mechanism becomes dirty or worn,

the picture quality may be affected. To maintain the best picture

quality, we recommend regular inspection and maintenance

(cleaning or worn part replacement) every 1,000 hours of use

depending on the operating environment. Contact your Onkyo

dealer for details.

5. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that

the voltage in your area meets the voltage requirements printed

on this unit’s rear panel (e.g., AC 120 V, 60 Hz).

11. Moisture Condensation

Moisture condensation may damage this unit.

Read the following carefully:

6. Never Touch this Unit with Wet Hands

When you take a glass containing a cold drink outside on a sum-

mer’s day, drops of water, called condensation, form on the out-

side of the glass. Similarly, moisture may condense on the lens

of the optical pickup, one of the most important parts inside this

unit.

Never handle this unit or its power cord while your hands are

wet or damp. If water or any other liquid gets inside this unit,

have it checked by your Onkyo dealer.

7. Installing this Unit

• Moisture condensation can occur in the following situations:

— The unit is moved from a cold place to a warm place.

• Install this unit in a well-ventilated location.

Ensure that there’s adequate ventilation all around this unit,

especially if it’s installed in an audio rack. If the ventilation is

inadequate, the unit may overheat, leading to malfunction.

— A heater is turned on, or cold air from an air conditioner is

hitting the unit.

• Do not expose this unit to direct sunlight or heat sources,

because its internal temperature may rise, shortening the life

of the optical pickup.

— In the summer, when this unit is moved from an air condi-

tioned room to a hot and humid place.

— The unit is used in a humid place.

• Avoid damp and dusty places, and places subject to vibrations

from loudspeakers. Never put the unit on top of, or directly

above a loudspeaker.

• Install this unit horizontally. Never use it on its side or on a

sloping surface, because it may cause a malfunction.

• If you install this unit near aTV, radio, orVCR, the picture and

sound quality may be affected. If this occurs, move this unit

away from the TV, radio, or VCR.

• Do not use this unit when there’s the possibility of moisture

condensation occurring. Doing so may damage your discs and

certain parts inside this unit.

If condensation does occur, remove all discs and leave this

unit turned on for two to three hours. By this time, the unit will

have warmed up and any condensation will have evaporated.

To reduce the risk of condensation, keep this unit connected to

a wall outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 6 Tuesday, February 10, 2004 10:12 AM

Introduction

Supplied Accessories

DV-CP702 Features

Make sure you have the following accessories:

Highlights

• Dolby Digital and DTS

• Holds up to six discs

• Chain mode for successive disc playback

• DVD-Video playback

• Video CD playback

• Audio CD playback

Remote controller (RC-542DV) & 2 batteries (AA)

• MP3/WMA playback

• JPEG picture display and slideshow

• CD-R, CD-RW (Video CD, audio CD, MP3/WMA/JPEG)

• DVD-R, DVD-RW (DVD-Video)

• Direct digital path for signal purity

• Vector Linear Shaping Circuitry

Video

AV connecting cable (RCA/phono)

S-Video connecting cable

• Advanced 54 MHz/10-bit video D/A converter

• Component video output

• S-Video and composite video outputs

• Title, chapter, track, or time search

• Pause/Still setting for enhanced display of single frames

• Frame-by-frame playback

• Slow motion playback (four speeds)

• Fast forward and reverse (ﬁve speeds)

• Last Memory function allows you to resume playback from a

speciﬁc point on a DVD-Video disc or Video CD, even if that

disc has been removed from the DV-CP702

• Repeat playback options include: Chapter, Title, 1 Disc, All

Discs, Track, and Folder (MP3/WMA)

• Random playback options include: Title, 1 Disc, All Discs,

and Folder (MP3/WMA)

cable

• Supports 4:3 and 16:9 aspect ratio TVs

• Supports up to 8 soundtracks/languages

• Supports up to 32 subtitle languages

• Multiple camera angle support

Coaxial digital cable (U.S. model only)

• Parental Lock function

• Screen Saver function

Audio

• Audiophile-class performance

• Direct digital path

• 192 kHz/24-bit D/A converter

• Coaxial digital output

• Optical digital output

• Analog output

Others

• Load discs without stopping playback

• Dynamic Range Control setting

• Adjustable display brightness

*1. Manufactured under license from Dolby Laboratories. “Dolby” and the

double-D symbol are trademarks of Dolby Laboratories.

*2. “DTS” is a trademark of Digital Theater Systems, Inc.

*3.

Windows Media, and the Windows logo are trademarks,

or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 7 Tuesday, February 10, 2004 10:12 AM

Introduction—Continued

DVD Region Numbers

Disc Notes

The NorthAmerican DV-CP702 supports only Region 1

DVD-Video discs bearing this logo.

Supported Discs

The DV-CP702 supports the following discs.

The Australian DV-CP702 supports only Region 4

DVD-Video discs bearing this logo.

Disc

Logo

Format or ﬁle type

If you attempt to play a disc intended for another region, the

message “Cannot play discs with this region code” appears

onscreen.

DVD-Video

DVD-R

DVD-Video

Function Support

The following icons are used throughout this manual to indicate

which functions can be used with the various disc formats and

ﬁle types.

DVD-RW

Video CD

DVD-Video

Icon

Disc format or ﬁle type

Version 1.1 and 2.0

PCM and DTS

DVD

DVD-Video

VCD

Video CD

Audio CD

MP3 ﬁle

Audio CD

Video CD, audio CD,

MP3, WMA, JPEG

CD-R

MP3

WMA

JPEG

WMA ﬁle

JPEG ﬁle

Video CD, audio CD,

MP3, WMA, JPEG

CD-RW

JPEG CD

JPEG

Unsupported DVD Features

*1. The NorthAmerican model will only play Region 1, NTSC DVD-Video

discs. The Australian model will only play Region 4, PAL DVD-Video

discs, although it can be set to AUTO, in which case it will also play

Region 4 NTSC DVD-Video discs (see page 39).

*2. Some audio CDs feature copy protection that doesn’t conform to the

ofﬁcial CD standard. Since these are nonstandard discs, they may not

play properly in the DV-CP702.

*3. The DV-CP702 supports CD-R and CD-RW discs recorded inVideo CD

format, audio CD format, or ISO9660 Level 2 format with MP3, WMA,

and JPEG ﬁles. It also supports DVD-R and DVD-RW discs recorded

in DVD-Video format. However, some CD-R, CD-RW, DVD-R, and

DVD-RW discs may not work properly for any of the following reasons:

incomplete disc ﬁnalization, disc burner characteristics, disc character-

istics, the disc is damaged or dirty. See the manual supplied with your

disc burner for more information. Condensation or dirt on the optical

pickup lens can also affect playback.

The DVD standard offers many special features,

including multiple soundtracks, subtitles, camera

angles, and so on. However, not all discs employ all of

these features. When you attempt to use a feature that is not used

by the current disc, for example, you press the remote control-

ler’s [AUDIO] button while playing a disc with only one

soundtrack, this icon will appear onscreen, indicating that the

feature is not supported by the current disc.

Similarly, if a disc uses features that are not supported

by the DV-CP702, for example, special interactive

menu functions, this icon will appear onscreen, indicat-

ing that the feature is not supported by the DV-CP702.

Disc Content Organization

• The DV-CP702 does not support disc types not listed.

• The DV-CP702 does not support the following disc types even

if they bear one of the logos shown above: DVD-RAM,

DVD+R, DVD+RW, DVD Audio, Super Audio CD, Photo

CD, CD-G.

• The DV-CP702 supports 8 cm and 12 cm discs.

• Don’t use discs with an unusual shape, such as those shown

below, because you may damage the DV-CP702.

■ DVD-Video Format

DVD-Video discs contain titles, which are usually subdivided

into chapters.

Title 1

Title 2

Chapter 1

Chapter 2

Chapter 1

Chapter 2

DVD-Video

■ Video CD Format

Video CDs contain tracks.

Track 1

Track 2

Track 3

Track 4

• Don’t use discs that have residue from adhesive tape, rental

discs with peeling labels, or discs with custom-made labels or

stickers. Doing so may damage the DV-CP702 and you may

not be able to remove the disc properly.

“

”

Video CD

About playing copy-controlled CDs

Some copy-controlled CDs may not conform to ofﬁcial CD stan-

dards. They are special discs and may not play on the DV-

CP702.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 8 Tuesday, February 10, 2004 10:12 AM

Introduction—Continued

■ Audio CD Format

■ MP3

Audio CDs contain tracks.

• MP3 ﬁles must be MPEG1 Audio Layer 3 format, 44.1 or

48 kHz, ﬁxed bit-rate.

Track 1

Track 2

Track 3

Track 4

Track 5

• MP3 ﬁles must have a “.mp3” or “.MP3” ﬁlename extension.

• Variable bit-rates (VBR) from 64 kbps to 384 kbps are sup-

ported. (Playing times may display incorrectly with VBR.)

Audio CD

■ WMA

■ MP3/WMA Files

• WMA ﬁles must have the copyright option turned off.

• Sampling rates 44.1/48 kHz are supported.

• Variable bit-rates (VBR) from 16 kbps to 192 kbps are sup-

ported. (Playing times may display incorrectly with VBR.)

• WMA ﬁles must have a “.wma” or “.WMA” or “.ASF” ﬁle-

name extension.

MP3 and WMA ﬁles are typically organized into folders. The

DV-CP702 handles MP3 and WMA ﬁles as tracks.

Folder 1

Track 2

Folder 2

Track 1

Track 3

Track 1 Track 2

■ JPEG

MP3/WMA (CD-R/CD-RW)

• JPEG ﬁles must have a “.jpg” or “.JPG” or “.JPEG” ﬁlename

extension.

■ JPEG Files

JPEG picture ﬁles are typically organized into folders. The DV-

CP702 handles JPEG ﬁles as tracks.

• Baseline JPEG ﬁles are supported. Progressive JPEG ﬁles are

not.

• Only JPEG ﬁles with the following brightness/color differ-

ence ratios are supported: 4:4:4, 4:2:2, and 4:1:1.

• JPEG ﬁles must be less than 5 megabytes in size.

Folder 1

Track 2

Folder 2

Track 1 Track 2

Track 1

Track 3

Handling Discs

JPEG (CD-R/CD-RW)

• Never touch the underside of a disc. Always hold discs by the

edge, as shown.

Video CDs

The DV-CP702 supports Version 1.1 and Version 2.0 of the

Video CD standard. Version 2.0 supports PBC (Playback Con-

trol).

• Video CD (Version 1.1)

The contents of Video CDs that conform to Version 1.1 of the

Video CD standard are played as tracks.

Underside

• Video CD with PBC (Version 2.0)

• Never attach adhesive tape or sticky labels to discs.

In addition to the functions supported by Version 1.1, Version

2.0 offers playback control via interactive menus and search

functions. Note that the DV-CP702 doesn’t support all Video

CD PBC functions.

MP3/WMA/JPEG Compatibility

• The DV-CP702 can play/display MP3, WMA, and JPEG ﬁles

recorded on CD-R and CD-RW discs.

Cleaning Discs

• For best results, keep your discs clean. Fingerprints and dust

can affect the sound and picture quality and should be

• Discs must be in ISO9660 Level 2 format (folders can be up

to eight levels deep).

removed as follows. Using a clean soft cloth, wipe from the

center outwards, as shown. Never wipe in a circular direction.

• Discs must be ﬁnalized.

• The DV-CP702 can only recognize the ﬁrst session on multi-

session discs.

• You can determine the order in which the DV-CP702 plays/

displays your MP3/WMA songs and JPEG pictures by preﬁx-

ing ﬁle and folder names with a three-digit number. For exam-

ple 001.Root, 002.Folder, and so on, and 001.Track.mp3,

002.Track.mp3, and so on.

✔

• Only the ﬁrst eight characters of folder and track names

(excluding the ﬁlename extension) are displayed.

• The folder numbered “001” appears as “ROOT” in the Disc

Navigator.

• The DV-CP702 supports up to 999 folders and up to 672 ﬁles

per folder.

• To remove stubborn dust or dirt, wipe the disc with a damp

soft cloth, and then dry it with a dry cloth.

• Never use solvent-based cleaning ﬂuids, such as thinner or

benzine, commercially available cleaners, or antistatic sprays

intended for vinyl records, because they may damage the disc.

• If you try to play an incompatible ﬁle, the message “This for-

mat cannot be played” appears on the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 9Tuesday, February 10, 2004 10:12 AM

Introduction—Continued

■ DVD-RW (DVD rewritable): A type of DVD disc that can be

recorded many times. Can be used to make DVD-Video discs or

to store computer data.

Storing Discs

• Don’t store discs in places subject to direct sunlight, or near

heat sources.

• Don’t store discs in places subject to moisture or dust, such as

in a bathroom or near a humidiﬁer.

• Always store discs in their cases and vertically. Stacking, or

putting objects on unprotected discs may cause warping,

scratches, or other damage.

■ DVD-Video: The format for storing movies on DVD, with

interactive menus, multiple language soundtracks, subtitles,

camera angles, and so on.

■ Field: In interlaced scanning, a ﬁeld is a single scan of the

screen. There are two ﬁelds per frame.

■ Frame: An individual TV picture is called a frame. With the

NTSC color system there are 30 frames per second.

It is forbidden by law to copy, broadcast, show, broadcast on

cable, play in public, or rent copyrighted material without per-

mission.

■ Interlaced scanning: TV pictures are made by scanning

the screen in horizontal lines from top to bottom.With Interlaced

scanning, two scans (ﬁelds) are used to make each picture

(frame). Contrast with Progressive scanning.

DVD-Video discs are copy-protected, and any recordings made

from these discs will be distorted.

■ JPEG (Joint Photographic Experts Group): The com-

This product incorporates copyright protection technology that

is protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright-protection tech-

nology must be authorized by Macrovision Corporation, and is

intended for home and other limited viewing uses only, unless

otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

pressed ﬁle format used to store digital photos.

■ LFE (low-frequency effects): The surround-sound chan-

nel used for low-frequency effects.

■ Linear PCM: The uncompressed digital audio format used

for audio CDs. PCM stands for Pulse Code modulation.

■ MP3 (MPEG 1 Audio Layer 3): Popular compressed ﬁle

format for storing digital music.

■ MPEG1 (Moving Picture Experts Group 1): The com-

pressed digital video format used for Video CDs.

DV-CP702-related Terminology

■ MPEG2 (Moving Picture Experts Group 2): The com-

pressed digital video format used for DVD-Videos, offering bet-

ter picture quality than MPEG1.

■ CD-R (compact disc recordable): A type of CD that can

be recorded only once. Can be used to make Video-CDs, audio

CDs, or MP3/WMA/JPEG discs.

■ NTSC: The color TV system used in the United States,

Japan, Taiwan, and Korea.

■ CD-RW (compact disc rewritable): A type of CD that can

be recorded many times. Can be used to makeVideo-CDs, audio

CDs, MP3/WMA/JPEG discs.

■ PAL: The color TV system used in most of Europe, the

United Kingdom, Australia, Brazil, and China.

■ Chapter: Titles on DVD-Video discs can be subdivided into

chapters.

■ PBC (Playback Control): Version 2.0 of the Video CD

standard supports interactive menus and search functions.

■ Component video: A video connection format that sepa-

rates the luminance (Y) and color difference signals (P^R, P^B),

providing better picture quality than S-Video.

■ Progressive scanning: TV pictures are made by scanning

the screen in horizontal lines from top to bottom. With progres-

sive scanning, each picture (frame) is made by scanning the

entire screen in one go, resulting is a clearer and stabler picture.

Contrast with Interlaced scanning.

■ Composite video: A video connection format that mixes

the luminance and color signals together.

■ Dolby Digital: The multi-channel digital surround sound

format used on most DVD-Videos.

■ S-Video: A video connection format that separates the lumi-

nance (Y) and color (C) signals, providing better picture quality

than composite video.

■ Dolby Pro Logic: The four-channel analog surround sound

format that can be encoded in normal stereo soundtracks and

used withVHS video cassettes, analog TV broadcasts, and other

analog stereo systems.

■ Title: Movies on DVD-Video are called titles.

■ Video CD: The format for storing movies on CD.

■ Downmixing: The process of mixing multiple audio chan-

nels into fewer channels. For example, a 5.1-channel surround

mix can be downmixed into two channels for reproduction on

stereo systems.

■ WMA (Windows Media Audio): A compressed ﬁle format

for storing digital music.

■ Downsampling: The process of reducing the sampling rate

of digital audio.

■ DTS (Digital Theater System): The 5.1-channel surround

format that uses less compression for faithful reproduction.

■ DVD-R (DVD recordable): A type of DVD disc that can be

recorded only once. Can be used to make DVD-Video discs or

to store computer data.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 10 Tuesday, February 10, 2004 10:12 AM

Controls & Connectors

Front Panel

A B

DV-CP702

HI K

M NO P Q R S

For detailed information, refer to the pages in parenthesis.

J DISPLAY button (37)

This button is used to display information about the cur-

rent disc, title, chapter, or track, including the elapsed

time, remaining time, total time, and so on.

A STANDBY/ON button (20)

This button is used to set the DV-CP702 to On or

Standby.

Don’t turn on the power until you’ve completed, and

double checked all connections (page 16).

K REPEAT button (31)

This button is used with the Repeat function.

B STANDBY indicator (20)

This indicator lights up when the DV-CP702 is in

Standby mode.

L Display

See “Display” on page 11 for more information.

M Remote control sensor (15)

This sensor receives control signals from the remote

controller.

C Disc tray (21)

The disc tray has six bays for loading up to six discs.

D Disc tray light

N Previous [ ] button (25, 28)

This button is used to select the previous chapter or

track. During playback it selects the beginning of the

current chapter or track.

This light illuminates the disc tray. It comes on when the

DV-CP702 is turned on, and is brighter while the disc

tray is open.

E DISC SKIP button (21, 22)

O Next [ ] button (25, 28)

This button is used to select the disc bays (i.e., rotate the

disc tray) when loading or removing discs, and to select

discs for playback.

This button is used to select the next chapter or track.

P PAUSE [ ] button (22)

This button is used to pause playback.

F DISC SELECT 1–6 buttons (22)

Q CHAIN MODE button (30)

These buttons are used to select discs. Playback starts

automatically when a disc is selected with these buttons.

This button is used with the Chain mode function.

R STOP [ ] button (22)

G Open/Close [ ] button (21)

This button is used to stop playback.

This button is used to open and close the disc tray.

S PLAY/ENTER [ ] button (22)

This button is used to start playback and to cancel fast

forward and fast reverse. It’s also used to start Chain

mode playback.

H LAST MEMORY button (36)

This button is used with the Last Memory function.

I DIMMER button (29)

This button is used to adjust the display brightness.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 11 Tuesday, February 10, 2004 10:12 AM

Controls & Connectors—Continued

Display

1 2 3 4 5 6 7 8 9 0A B C

CHAIN MODE DISC

ALL

DVD

TITLE

CHP TRACK

PRGV LAST

TOTAL REMAIN

VCDVD

For detailed information, refer to the pages in parenthesis.

CDisc indicators 1–6 (21)

These indicators show how many discs are loaded. The

number of the current disc has a circle around it.

When the disc tray is closed, all of the disc indicators

appear until the DV-CP702 has checked each bay for the

presence of a disc. If a bay is found to have no disc, the

corresponding indicator disappears.

1CHAIN MODE, ALL, DVD & CD indicators (30)

The CHAIN MODE indicator appears when the Chain

mode function is on. The ALL, DVD, and CD indicators

show the type or Chain mode selected.

2DISC indicator (22)

The number of the currently selected disc appears here.

DChapter & track number

3TITLE indicator (22)

Chapter and track numbers appears here.

While stopped, the total number of titles on the current

DVD-Video disc is displayed here. During playback, the

number of the current title is displayed.

ETime display

Time information, such as total time, remaining time,

and so on, is displayed here in hours, minutes, and sec-

onds. Other messages are also displayed.

4CHP indicator

This indicator appears while the number of the current

chapter is being displayed.

FVCDVD indicator

This indicator shows the type of disc currently selected:

DVD: DVD-Video, DVD-R, or DVD-RW

VCD: Video CD

5TRACK indicator

This indicator appears while track numbers are being

displayed. While stopped, the total number of tracks on

the current Video CD, audio CD, or MP3/WMA disc are

displayed. During playback, the number of the current

track is displayed.

CD: Audio CD, MP3/WMA/JPEG CD-R, or CD-RW

6PRGV indicator (35)

This indicator appears when the Progressive Scanning

function is on.

7LAST indicator (36)

This indicator appears when the Last Memory function

has been set.

8TOTAL indicator (37)

This indicator appears while the total time is being dis-

played.

9REMAIN indicator (37)

This indicator appears while the remaining time is being

displayed.

0Camera angle indicator (34)

This indicator appears if the DVD-Video disc being

played features multiple camera angles.

APlay indicator (22)

This indicator is shown during playback.

BPause indicator (10)

This indicator appears when playback is paused.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 12 Tuesday, February 10, 2004 10:12 AM

Controls & Connectors—Continued

Rear Panel

1 2345

VIDEO OUTPUT

OPTICAL

COAXIAL

AUDIO

OUTPUT

DIGITAL

VIDEO

COMPONENT

VIDEO

DVD CHANGER

REMOTE

CONTROL

MODEL NO. DV CP702

AUDIO

OUTPUT

ANALOG

For detailed information, refer to the pages in parenthesis.

A COMPONENT VIDEO OUTPUT (17)

These RCA/phono connectors can be used to connect a

TV or projector with component video inputs.

B S VIDEO OUTPUT (17)

This connector can be used to connect a TV or projector

with an S-Video input.

C VIDEO OUTPUT (17)

This RCA/phono connector can be used to connect a TV

or projector with a composite video input.

D OPTICAL AUDIO OUTPUT (18)

This optical digital audio output can be connected to an

optical digital audio input on a hi-ﬁ amp, AV receiver, or

surround sound decoder (Dolby Digital, DTS).

E COAXIAL AUDIO OUTPUT (18)

This coaxial digital audio output can be connected to an

coaxial digital audio input on a hi-ﬁ amp, AV receiver, or

surround sound decoder (Dolby Digital, DTS).

F Power cord (20)

This power cord should be connected to a suitable wall

outlet.

G ANALOG AUDIO OUTPUT (17, 18)

These RCA/phono connectors can be connected to ana-

log audio inputs on a hi-ﬁ amp, AV receiver, or surround

sound decoder (Dolby Pro Logic).

REMOTE CONTROL (19)

These (Remote Interactive) connectors can be con-

nected to the connectors on your other Onkyo AV

components for interactive control.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 13 Tuesday, February 10, 2004 10:12 AM

Controls & Connectors—Continued

For detailed information, refer to the pages in parenthesis.

Remote Controller

A STANDBY button (20)

This button is used to set the DV-CP702 to Standby.

B ON button (20)

This button is used to turn on the DV-CP702.

Don’t turn on the DV-CP702 until you’ve completed,

and double checked all connections (page 16).

ON STANDBY

OPEN/

C SEARCH button (25, 28, 31)

This button is used to search for titles, chapters, tracks,

and speciﬁc points in time.

SEARCH LAST M MEMORY CHAIN MODE

REPEAT

D LAST M button (36)

This button is used with the Last Memory function.

RANDOM

DISPLAY

E Number buttons (25, 28, 31)

These buttons are used to enter title, chapter, and track

numbers and to enter times for locating speciﬁc points in

time.

To enter a single-digit number, simply press the corre-

sponding button. To enter a double-digit number, enter

the numbers in order from left-to-right (e.g., to enter 14,

press [1] then [4].

The [+10] button is used to enter multiples of ten (i.e.,

10, 20, 30, and so on). For example, to enter the number

25, press the [+10] button twice followed by the [5] but-

ton.

CLEAR

TOP MENU

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE ZOOM

F TOP MENU button (24)

DISC

STEP/SLOW

This button is used to select the top menu.

G RETURN button (39)

This button is used to exit the onscreen setup menu and

to restart menu playback.

DISC SKIP PROGRESSIVE DIMMER

H AUDIO button (35)

RC-542DV

This button is used to select foreign language

soundtracks and audio formats (e.g., Dolby Digital or

DTS).

I ANGLE button (34)

This button is used to select different camera angles.

J Fast Forward [ ] button (28)

This button is used to start fast forward.

K Fast Reverse [ ] button (28)

This button is used to start fast reverse.

L DISC 1–6 buttons (22)

These buttons are used to select discs. Playback starts

automatically when a disc is selected with these buttons.

M DISC SKIP button (21, 22)

This button is used to select the disc bays (i.e., rotate the

disc tray) when loading or removing discs, and to select

discs for playback.

N MEMORY button (33)

This button is used with the Memory Playback function.

O OPEN/CLOSE [ ] button (21)

This button is used to open and close the disc tray.

P CHAIN MODE button (30)

This button is used with the Chain mode function.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 14 Tuesday, February 10, 2004 10:12 AM

Controls & Connectors—Continued

Q REPEAT button (31)

This button is used to set the Repeat Playback functions.

R A–B button (32)

This button is used to set the A–B Repeat Playback func-

tion.

S RANDOM button (32)

This button is used with the Random Playback function.

T DISPLAY button (37)

This button is used to display information about the cur-

rent disc, title, chapter, or track, including the elapsed

time, remaining time, total time, and so on.

U CLEAR button

This button is used to cancel various functions.

V MENU button (24)

This button is used to select the menu.

W ENTER button

This button is used to start playback of the selected title

chapter, or track and to conﬁrm settings.

X [ ], [ ], [ ], [ ] buttons

These buttons are used to navigate DVD-Video menus

and the onscreen setup menus.

Y SETUP button (39)

This button is used to open and close the onscreen setup

menus.

Z SUBTITLE button (35)

This button is used to select subtitles.

a Play [ ] button (22)

This button is used to start playback.

b Pause [ ] button (22)

This button is used to pause playback.

c Stop [ ] button (22)

This button is used to stop playback.

d Previous [ ] button (25, 28)

This button is used to select the previous chapter or

track. During playback it selects the beginning of the

current chapter or track.

e Next [ ] button (25, 28)

This button is used to select the next chapter or track.

f STEP/SLOW [+] & [–] buttons (29)

These buttons are used with the Frame-by-Frame Play-

back and Slow Motion Playback functions.

g DIMMER button (29)

This button is used to adjust the display brightness.

h PROGRESSIVE button (35)

This button is used to turn on and off the Progressive

Scanning function. Progressive scanning can’t be turned

on or off during playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 15 Tuesday, February 10, 2004 10:12 AM

Before Using the DV-CP702

Installing the Remote Controller’s

Batteries

Using the Remote Controller

To use the remote controller, point it at the DV-CP702’s

remote control sensor, as shown below.

Open the battery compartment, as shown.

Remote control sensor

DV-CP702

Insert the two supplied batteries (AA) in

accordance with the polarity diagram inside

the battery compartment.

30˚

Close the battery compartment.

Notes:

• The remote controller may not work reliably if the DV-

CP702 is subjected to bright light, such as direct sunlight

or inverter-type ﬂuorescent lights. Keep this in mind when

installing the DV-CP702.

• If another remote controller of the same type is used in the

same room, or the DV-CP702 is installed close to equip-

ment that uses infrared rays, the remote controller may not

work reliably.

Notes:

• The supplied batteries should last for about six months,

although this will vary with usage.

• Don’t put anything, such as a book, on the remote control-

ler, because the buttons may be pressed inadvertently,

thereby draining the batteries.

• If the remote controller doesn’t work reliably, try replacing

both batteries.

• Don’t mix new and old batteries, or different types of bat-

teries.

• The remote controller may not work reliably if the DV-

CP702 is installed in a rack behind colored glass doors.

Keep this in mind when installing the DV-CP702.

• If you intend not to use the remote controller for a long

time, remove the batteries to prevent possible leakage and

corrosion.

• The remote controller will not work if there’s an obstacle

between it and the DV-CP702’s remote control sensor.

• Flat batteries should be removed as soon as possible to pre-

vent possible leakage and corrosion.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 16 Tuesday, February 10, 2004 10:12 AM

Connecting the DV-CP702

This chapter explains how to connect the DV-CP702 to your

other AV components.

RCA/phono AV Connection Color Coding

RCA/phono AV connections are usually color coded: red,

white, and yellow. Use red plugs to connect right-channel

audio inputs and outputs (typically labeled “R”). Use white

plugs to connect left-channel audio inputs and outputs (typi-

cally labeled “L”). And use yellow plugs to connect compos-

ite video inputs and outputs.

Before Making Any Connections

• Read the manuals supplied with your AV components.

• Don’t connect the power cord until you’ve completed all

audio and video connections.

Right (red)

Left (white)

Right (red)

Left (white)

Optical Digital Inputs

Analog audio

The DV-CP702’s optical digital connector

has a dust cap for keeping out dust and dirt

when it’s not in use. Remove the cap before

inserting an optical digital plug. Push the

plug in all the way to make a good connec-

tion. Keep the dust cap in a safe place for

future use.

Composite video

(Yellow)

Right!

• Push the plugs in all the way to make

a good connection.

• To prevent interference, keep audio

and video cables away from power

cords and speaker cables.

Wrong!

AV Cables & Connectors

Video

/CR

/ CR

Component video separates the luminance (Y) and color

difference signals (P^R, P^B), providing the best picture

quality. (Some TV manufacturers label their component

video inputs slightly differently.)

Component

video

S VIDEO

VIDEO

S-Video provides better picture quality than composite

video.

S-Video

Composite video can be found on virtually all TVs,

VCRs, and other video equipment. Use only dedicated

composite video cables.

Composite

video

Audio

Optical digital audio connections with the optical digital

audio output and a suitable AV receiver, you can enjoy

DVD-Videos with surround sound.

OPTICAL

Optical digital

Coaxial digital audio connections with the coaxial digi-

tal audio output and a suitable AV receiver, you can

enjoy DVD-Videos with surround sound.

COAXIAL

AUDIO

Coaxial digital

Analog

RCA/phono analog audio connectors can be found on

virtually all AV components.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 17 Tuesday, February 10, 2004 10:12 AM

Connecting the DV-CP702—Continued

ConnectingYour TV or Projector

This section explains how to connect the DV-CP702 to your

TV or projector.

S-Video offers better picture quality than composite video,

so if your TV supports it, use the supplied S-Video cable to

connect the DV-CP702’s S VIDEO output to an S-Video

input on your TV. Failing that, use the supplied composite

video cable to connect the DV-CP702’s VIDEO output to a

composite video input on your TV.

In this hookup example, the TV handles the audio and video.

If your TV has a Dolby Pro Logic decoder built-in, you’ll be

able to enjoy DVDs and videos that bear the Dolby Surround

logo.

To enjoy Dolby Digital or DTS (5.1-channel surround),

you’ll need a compatible decoder (see page 18).

Turn off the DV-CP702 and your TV, and dis-

connect their power cords from the wall out-

lets.

The DV-CP702 has three types of video output: component

video, S-Video, and composite video. Component video

offers the best picture quality, so if your TV supports it, use

a commercially available component video cable to connect

the DV-CP702’s COMPONENT video output to the compo-

nent video inputs on your TV. If your TV supports progres-

sive scanning, you must use component video in order to take

advantage of that feature.

Connect the DV-CP702 to your TV as shown.

When you’ve completed all connections,see

“Powering Up & Setting Up the DV-CP702”

on page 20.

TV or projector

VIDEO IN

ANALOG

INPUT

S VIDEO IN

(red)

(white)

(yellow)

Component video

cable

S-Video cable

(supplied)

AV RCA/phono

cable (supplied)

(red)

Only one connection required!

Choose component video,

S-Video, or composite video.

(white)

(yellow)

VIDEO OUTPUT

OPTICAL

COAXIAL

AUDIO

OUTPUT

DIGITAL

VIDEO

COMPONENT

VIDEO

DVD CHANGER

REMOTE

CONTROL

MODEL NO. DV CP702

AUDIO

OUTPUT

ANALOG

picture distortion, because of the copy protection system

used on DVD-Video discs.

Notes

• Before making any connections, turn off the DV-CP702

and your TV and disconnect their power cords from the

wall outlets.

• When you use the analog audio outputs, don’t play DTS

CDs or don’t select DTS soundtracks on DVD-Video discs.

Doing so will produce unpleasant digital noise, which may

damage your equipment.

• Also refer to the connection information supplied with

your TV.

• Connect the DV-CP702’s video outputs directly to your

TV. Don’t connect a VCR or other video equipment in

between your DV-CP702 and TV. Doing so may result in

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 18 Tuesday, February 10, 2004 10:12 AM

Connecting the DV-CP702—Continued

Notes:

ConnectingYour Hi-Fi Amp

• Be sure to set the Digital Out–>Dolby Digital setting to

“Dolby Digital>PCM” (see page 41). Otherwise an

unpleasant digital noise may be heard, which may damage

your equipment.

This section explains how to connect the DV-CP702 to a ste-

reo hi-ﬁ amp or receiver for better sound quality than that of

most TVs. This is ideal for playing your audio CDs and MP3/

WMA discs in the DV-CP702. DVD-Video discs and Video

CDs will sound better too. You can also enjoy Dolby Pro

Logic, so long as your receiver supports it.

• Never connect the DV-CP702 to the AC-3RF input on a

Dolby Digital receiver. The AC-3RF format is not sup-

ported by the DV-CP702.

Analog Connection

Connecting for Dolby Digital or DTS

Use an RCA/phono audio cable to connect the DV-CP702’s

ANALOG AUDIO OUTPUTs to a pair of analog audio

inputs on your hi-ﬁ amp or receiver, as shown.

To enjoy Dolby Digital or DTS surround sound, you need to

connect one of the DV-CP702 digital audio outputs to the

digital input on a Dolby Digital or DTS decoder or an AV

receiver with built-in decoders.

Signal flow

This hookup example will also allow you to enjoy Dolby Pro

Logic, so long as your decoder or AV receiver supports it.

ANALOG

INPUT

VIDEO OUTPUT

(white)

(red)

OPTICAL

COAXIAL

AUDIO

OUTPUT

DIGITAL

VIDEO

COMPONENT

VIDEO

DVD CHANGER

REMOTE

CONTROL

MODEL NO. DV CP702

AUDIO

OUTPUT

ANALOG

RCA/phono cable

(red)

Signal flow

OPTICAL

COAXIAL

VIDEO OUTPUT

OPTICAL

COAXIAL

VIDEO

Connect one or the other

Coaxial

AUDIO

COMPONENT

VIDEO

OUTPUT

digital cable

(Supplied with

U.S. model only)

REMOTE

CONTROL

COAXIAL

AUDIO

OUTPUT

ANALOG

OPTICAL

ANALOG

Notes:

• When you use the analog audio outputs, don’t play DTS

CDs or don’t select DTS soundtracks on DVD-Video discs.

Doing so will produce unpleasant digital noise, which may

damage your equipment.

AV component with

Dolby Digital/DTS decoder

Notes:

Digital Connection

• Make sure that the Digital Out–>Dolby Digital setting to

“Dolby Digital” (see page 41). Otherwise you won’t get

surround sound.

Use an optical (or coaxial) digital audio cable to connect the

DV-CP702’s OPTICAL (or COAXIAL) DIGITAL AUDIO

OUTPUT to an optical (or coaxial) input on your hi-ﬁ amp or

receiver, as shown.

• Also refer to the connection information supplied with

your AV receiver or decoder.

• When playing Dolby Digital or DTS source material, be

sure to select Dolby Digital or DTS decoding, respectively,

on your AV receiver or decoder. See the relevant manuals.

Signal flow

COAXIAL

OPTICAL

• You can experience Dolby Digital only with DVDs that

bear the Dolby Digital logo. Likewise, you can experience

DTS only with DVDs or CDs that bear the DTS logo.

Connect one or the other

OPTICAL

COAXIAL

VIDEO OUTPUT

OPTICAL

COAXIAL

AUDIO

OUTPUT

DIGITAL

VIDEO

COMPONENT

VIDEO

DVD CHANGER

REMOTE

CONTROL

MODEL NO. DV CP702

AUDIO

OUTPUT

ANALOG

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 19Tuesday, February 10, 2004 10:12 AM

Connecting -compatible AV Components

■ Auto Power Off

When you set any

With

CP702 and other

(Remote Interactive) you can control your DV-

-compatible Onkyo AV components

-compatible Onkyo AV receiver to

Standby, all other AV components connected via

Standby as well.

enter

together. With some Onkyo AV receivers you can use one

remote controller to control all your Onkyo components, and

use the following special

functions:

■ Dimmer

When you dim the display brightness on an

Onkyo AV component, the displays on all other AV compo-

nents connected via are dimmed as well.

-compatible

■ Auto Power On

If your DV-CP702 is connected to an

AV receiver, when you turn on the DV-CP702, the AV

receiver will turn on and select the DV-CP702 as the input

source.

-compatible Onkyo

See the manuals supplied with your other

components for more information.

-compatibleAV

■ Auto Source Select

If your DV-CP702 is connected to an

-compatible Onkyo

AV receiver, when you start playback on the DV-CP702, the

AV receiver will select the DV-CP702 as the input source.

Connection Diagram

To use the

functions, you need to connect one of the DV-CP702’s

connectors to an

connector on another AV

component by using an

cassette recorders.

cable. An

cable is supplied with all

-compatible Onkyo CD players, DVD players, and

Onkyo AV receiver

Connecting several

-compatible

Onkyo AV components

REMOTE

CONTROL

OPTICAL

Onkyo AV receiver

REMOTE

CONTROL

ANALOG

INPUT

DIGITAL

INPUT

connector

DV-CP702 DVD Changer

connector

To use

you must

also make an analog

RCA/phono connection

between your DV-CP702

and Onkyo AV receiver,

even if they are

Onkyo cassette

recorder

cable

(Supplied)

connected digitally.

VIDEO OUTPUT

OPTICAL

COAXIAL

AUDIO

OUTPUT

DIGITAL

VIDEO

COMPONENT

VIDEO

Disconnect the power

cord before making

any connections!

DVD CHANGER

REMOTE

CONTROL

MODEL NO. DV CP702

AUDIO

OUTPUT

ANALOG

• The DV-CP702 has two

either one to your OnkyoAV receiver. The other connector

connectors. You can connect

Notes:

• Push the plugs in all the way to make a good connection.

is for connecting additional

• Connect the DV-CP702’s

components. Connecting to other manufacturer’s AV com-

ponents may cause them to malfunction.

-compatible components.

• Use only

cables for

connections.

connector to only OnkyoAV

• To use

you must also make an analog RCA/phono

connection between your DV-CP702 and Onkyo AV

receiver, even if they are connected digitally.

• Some Onkyo

-compatible AV components may not

support the special functions described above.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 20 Tuesday, February 10, 2004 10:12 AM

Powering Up & Setting Up the DV-CP702

Here you need to specify the size of your TV (standard 4:3 or

widescreen 16:9), select a language for the onscreen setup

menus, and conﬁgure the digital audio output. You can

change these settings later by using the onscreen setup menus

(see page 38).

STANDBY/ON

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

Use the remote controller’s Up/

RANDOM

DISPLAY

Down [ ]/[ ] buttons to select aTV

Remote controller

CLEAR

shape, and then press [ENTER].

TOP MENU

See page 39 for more information on the

TV Shape options.

ENTER

RETURN

SETUP

STANDBY indicator

AUDIO ANGLE SUBTITLE

The On-Screen Language menu appears.

Select a language, and then press

[ENTER].

Powering Up the DV-CP702

Remote controller

See page 41 for more information on the

language options.

Before connecting the power cord, connect all your AV com-

ponents (see page 16 to page 19).

ENTER

The Digital Out–>Dolby Digital menu

appears.

Don’t forget to turn on your TV or projector and select the

video input to which the DV-CP702 is connected.

If you’re using a hi-ﬁ amp, AV receiver, or surround sound

decoder for audio playback, turn that on as well and select the

audio input to which the DV-CP702 is connected.

Select a Dolby Digital option, and

then press [ENTER].

See page 41 for more information on the

Remote controller

digital audio output options.

ENTER

Connect the power cord to a suit-

able wall outlet.

The DV-CP702 enters Standby mode, and

the STANDBY indicator comes on.

The Digital Out–>Linear PCM Out menu

appears.

Select a Linear PCM Out option,

and then press [ENTER].

The Digital Out–>MPEG Out menu

appears.

Remote controller

To turn on the DV-CP702, press the

[STANDBY/ON] button (or the

remote controller’s [ON] button).

ENTER

The DV-CP702 comes on, the display

lights up, and the STANDBY indicator

goes off.

Select an MPEG Out option, and

then press [ENTER].

Remote controller

To turn off the DV-CP702, press the

[STANDBY/ON] button (or the remote

controller’s [STANDBY] button). The

DV-CP702 enters Standby mode and the

STANDBY indicator comes on.

Remote controller

ON STANDBY

The Digital Out–>Digital Out menu

appears.

ENTER

Select a Digital Out option, and

then press [ENTER].

First Time Setup

Remote controller

The Initial Setup menu closes.

The very ﬁrst time you turn on your DV-CP702, the Initial

Setup menu appears onscreen, as shown.

ENTER

Initial Setup

TV Shape

4:3 Letter box

4:3 Normal

On-Screen Language

Digital Out

16:9 Widescreen

16:9 Compressed

Your DV-CP702 is now ready for use. See page 21 for infor-

mation on loading discs, and page 22 for information on

selecting and playing discs.

Notes:

• You can change the language of the onscreen setup menus,

and your preferred languages for DVD menus, foreign lan-

guage soundtracks, and subtitles individually on the Lan-

guage page of the onscreen setup menus (see page 41).

Sets aspect ratio of connected TV.

ENTER

Selection

• Not all DVD-Video discs have multi-language menus, for-

eign language soundtracks, and subtitles. In such cases, the

disc’s default language is used.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 21 Tuesday, February 10, 2004 10:12 AM

Basic Playback

Notes:

DISC

SELECT

OPEN/

• You can load up to six discs. You don’t have to load all six

discs every time.

DISC SKIP

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

• When the disc tray is closed, all of the disc indicators

appear until the DV-CP702 has checked each bay for the

presence of a disc. If a bay is found to have no disc, the

corresponding indicator disappears.

REPEAT

RANDOM

DISPLAY

CLEAR

TOP MENU

• The disc tray can be opened and closed even while the DV-

CP702 is in Standby mode, so you don’t have to turn it on

to load or remove your discs. (The disc tray may take sev-

eral seconds to open.)

DV CP702

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

PLAY/ENTER

• The DV-CP702 supports 8 cm and 12 cm discs. To avoid

damaging your discs or DV-CP702, always place discs in

the center of the disc bays.

DISC

STEP/SLOW

DISC1–6

DISC SKIP PROGRESSIVE DIMMER

DISC SKIP

RC 542DV

• Only load discs that are supported by the DV-CP702 (see

page 7). Don’t load cartridge-type discs.

• To avoid personal injury, keep your hands away from the

disc tray as it closes.

Loading & Removing Discs

• Always use the OPEN/CLOSE [ ] button to open and

close the disc tray. Never push the disc tray, and don’t

touch it, or obstruct it while it’s opening or closing. Don’t

press down on the disc tray while it’s open, and don’t load

anything other than supported discs. Doing so may damage

your discs or DV-CP702.

DVD

VCD

MP3

WMA

JPEG

This section explains how to load and remove discs.

Press the OPEN/CLOSE [

button.

]

The disc tray opens and the six disc num-

ber indicators appear on the display. A cir-

cle appears around the number of the disc

bay on the right.

Loading Discs During Playback

Remote controller

DVD

VCD

MP3

WMA

JPEG

OPEN/

This section explains how to load and remove discs without

stopping playback.

Place a disc, label side up, into

each bay.

Press the OPEN/CLOSE [ ] button.

The disc tray opens.

The disc that’s currently playing remains

inside the DV-CP702 and its disc bay is

empty and won’t come to the front. To

remove this disc you must stop playback

Press the [DISC SKIP] button to

access the other disc bays.

The disc tray turns counterclockwise two

bays at a time.

Remote controller

OPEN/

Remote controller

before pressing the OPEN/CLOSE [

button.

]

DISC SKIP

Load or remove discs as required,

and press the [DISC SKIP] button

to access the other disc bays.

The disc numbers appear onscreen. The

number of the disc bay on the right is

highlighted.

When you’ve ﬁnished, press the

OPEN/CLOSE [ ] button again.

The disc tray closes.

Remote controller

DISC SKIP

See page 22 for information on selecting

and playing discs.

When you’ve ﬁnished, press the

OPEN/CLOSE [ ] button again.

The disc tray closes.

Tip: If you press the Play [ ] button, the

disc tray will close and playback of the

disc in the right bay will start automati-

cally. If there is no disc in that bay, the

DV-CP702 will check the other bays and

play the ﬁrst disc it ﬁnds.

Remote controller

OPEN/

Playback of the current disc continues

uninterrupted until you either stop play-

back or select another disc.

Remote controller

Tip: If you press one of the DISC

SELECT 1–6 buttons, the disc tray will

close and playback of the selected disc

will start automatically.

Tip: If you press one of the DISC

SELECT 1–6 buttons, the disc tray will

close, playback of the current disc will

stop, and playback of the newly selected

disc will start automatically.

OPEN/

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 22 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

Starting, Pausing & Stopping Playback

TOP MENU

DISC SKIP DISC SELECT

DVD

VCD

MP3

WMA

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

This section explains how to start, pause, and stop playback.

■ Start

To start playback, press the Play

[ ] button.

DISC

STEP/SLOW

DISC1–6

DISC SKIP PROGRESSIVE DIMMER

Playback starts and the Play indicator

appears on the display.

DV-CP702

DISC SKIP

RC 542DV

PAUSE

If the disc is a DVD-Video or Video CD

with PBC (Playback Control), you may

need to start playback from a menu (see

page 24).

Remote controller

STOP

PLAY/ENTER

The front panel Play [ ] button performs

play and enter functions. The remote con-

troller has separate Play [ ] and

[ENTER] buttons.

Selecting Discs

DVD

VCD

MP3

WMA

JPEG

The section explains how to select loaded discs.

■ Pause

To pause playback, press the

Pause [ ] button.

Playback pauses and the Pause indica-

tor appears on the display.

Use the DISC SELECT buttons to

select loaded discs.

On the remote controller these buttons are

labelled [DISC 1], [DISC 2], and so on.

To resume playback, press the Play [ ]

button.

On the display, the number of the current

disc has a circle around it.

Remote controller

Playback resumes and the Pause indica-

tor disappears.

DISC

What happens next depends on the type of

disc you selected, as follows:

DISC

■ Stop

To stop playback, press the Stop

[ ] button.

Playback stops and the Play indicator

disappears.

DVD-Video: Typically a menu appears

onscreen. See page 24.

Video CD: Playback starts automatically.

Audio CD: Playback starts automatically.

Remote controller

MP3/WMA/JPEG: The Disc Navigator

appears onscreen. See page 26.

JPEG-only CD: With some JPEG CDs,

picture thumbnails appear onscreen. See

page 30.

Notes:

• During playback, you can select chapters or tracks by

using the Next [ ] and Previous [ ] buttons.

Notes:

• When you stop playback of a DVD-Video disc or Video

CD, the DV-CP702 remembers the point at which playback

was stopped and “Resume” appears onscreen for a few sec-

onds. To resume playback from that point, press the Play

[ ] button. To cancel the Resume function, press the Stop

[ ] button again. The Resume function is reset when

another disc is selected.

• The type of disc currently selected is shown on the display:

DVD, VCD, or CD (see page 11).

• You can select discs while the DV-CP702 is stopped or dur-

ing playback.

• You can use the [DISC SKIP] button to skip the current

disc and start the next disc. If disc #6 is the current disc,

disc #1 will be selected next.

• With the Last Memory function you can resume playback

from a speciﬁc point even if the disc has been removed (see

page 36).

• Do not move the DV-CP702 or subject it to vibration dur-

ing playback. Doing so may damage your discs or DV-

CP702.

• You can improve the picture quality of paused playback

with the Pause/Still setting (see page 43).

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 23 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

• Prolonged display of the same picture or menu may cause

irreparable damage to your TV screen called screen burn-

in. To prevent this, don’t keep playback paused for too long

and always press the Stop [ ] button when you’ve ﬁnished

playing a DVD-Video disc or Video CD. Your DV-CP702

features a screen saver to protect your TV from the effects

of burn-in (see page 43).

• With some DVD-Video discs, you may experience picture

noise that is not normally visible with regular TV broad-

casts. This is usually because DVD-Video disc uses a lot of

high-resolution video data. The amount of noise, if any,

will depend on your particular TV and the problem can

sometimes be alleviated by turning down your TV’s sharp-

ness control.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 24 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

Use the remote controller’s naviga-

tion [ ], [ ], [ ], [ ] buttons to

select items on the menu, and use

the [ENTER] button to conﬁrm your

selection.

Remote controller

ENTER

DV-CP702

If you select a playback option (e.g., sub-

titles), another menu of options will typi-

cally appear, in which case you use the

remote controller’s navigation buttons to

select items and the [ENTER] button to

conﬁrm your choice.

ON STANDBY

PLAY/ENTER

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

RANDOM

DISPLAY

CLEAR

TOP MENU

With PBC Video CDs, you have to enter a

number to select a menu item, which you

can do by using the remote controller’s

number buttons. If the Video CD’s menu

has several pages, use the Next [ ] and

Previous [ ] buttons to select them.

During playback, you can display the

menu by pressing the [RETURN] button.

TOP MENU

ENTER

RETURN

AUDIO

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

SUBTITLE

DISC

STEP/SLOW

DISC SKIP PROGRESSIVE DIMMER

RC 542DV

Notes:

• Not all DVD-Video discs and PBCVideo CDs have menus.

• Menu operation varies from disc-to-disc. See the disc’s

sleeve notes for details.

Navigating Disc Menus

• On some DVD-Video discs, options such as foreign lan-

guage soundtracks, subtitles, and audio formats appear on

a separate menu called the disc menu, and titles and chap-

ters appear on what’s called the title menu. To display the

disc menu, press the [MENU] button. If no menu appears,

press the [TOP MENU] button.

DVD

VCD

DVD-Video discs usually have an onscreen menu from

which you can select titles, chapters, and other options,

including foreign language soundtracks, subtitles, and audio

formats (e.g., Dolby Digital or DTS).Video CDs that support

PBC (Playback Control) may also have an onscreen menu

(see page 8).

• With DVD-Video discs, foreign language soundtracks and

audio formats can usually be selected during playback by

using the remote controller’s [AUDIO] button (see

page 35). Similarly, subtitles can be selected by using the

remote controller’s [SUBTITLE] button (see page 35).

Load and select a DVD-Video disc

or Video CD.

See page 21 and page 22.

• You must turn on PBC in order to use the menus on a PBC

Video CD (see page 43).

With DVD-Video discs, a menu usually

appears automatically. If it doesn’t, try

pressing the [TOP MENU] button.

• If PBC is off (see page 43), or your Video CD doesn’t sup-

port it, you can use the Next [ ] and Previous [ ] but-

tons, or the remote controller’s number buttons to select

tracks on a Video CD.

With some PBC Video CDs, you may

have to press the Play [ ] button to dis-

play the menu.

• PBC menus can be hidden or displayed while playback is

stopped by pressing the [TOP MENU] button.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 25 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

Use the number buttons to specify

a chapter or title.

To enter, for example, “2,” press the [2]

button.

ON STANDBY

OPEN/

Remote controller

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

Number

buttons

RANDOM

DISPLAY

disc

Disc Navigator

CLEAR

no.

TOP MENU

CLEAR

ENTER

Disc

Title

Chapter

DV-CP702

ENTER

1:DVD Current/Total 01/02 Current/Total -2 /08

RETURN

SETUP

AUDIO ANGLE SUBTITLE

To enter, for example, “12,” press the [1]

or [+10] button followed by the [2] but-

ton.

PLAY/ENTER

DISC

STEP/SLOW

DISC SKIP PROGRESSIVE DIMMER

disc

Disc Navigator

RC 542DV

no.

Disc

Title

Chapter

1:DVD Current/Total 01/02 Current/Total 12 /08

To clear the number, press the [CLEAR]

button.

Selecting Titles & Chapters by Number

DVD

Press the Play [ ] or [ENTER] but-

ton to start playback of the speci-

ﬁed chapter or title.

This section explains how to select chapters, titles, and discs

by number.

Load and select a DVD-Video disc.

See page 21 and page 22.

During playback, you can select other

chapters by using the Next [ ] and Pre-

vious [ ] buttons.

Remote controller

Press the [SEARCH] button.

The Disc Navigator Search window

Remote controller

appears onscreen, as shown.

disc

Disc Navigator

ENTER

no.

Disc

Title

Chapter

1:DVD Current/Total 01/02 Current/Total -- /08

Notes:

With some DVD-Video discs you can

select only titles, and the Chapter Current/

Total information is not displayed. Some

discs won’t allow you to select titles.

• You can also select chapters by using the number buttons,

without opening the Disc Navigator Search window.

• If the current DVD-Video disc contains only one title, you

won’t be able to select other titles. Similarly, if it contains

no chapters, you won’t be able to select chapters.

If you want to select a title, use the

[ ] button to select the title number.

• DVD-Video discs usually have onscreen menus for select-

ing titles and chapters (see page 24).

Remote controller

disc

Disc Navigator

• With some discs you may not be able to select titles and

chapters as described here.

no.

ENTER

Disc

Title

Chapter

1:DVD Current/Total -- /02 Current/Total 03/08

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 26 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

To open a folder, use the remote

controller’s Up/Down [ ]/[ ] but-

tons to select it, and then press

[ENTER].

Use the Up/Down [ ]/[ ] buttons to

select tracks in the open folder.

Remote controller

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

MEMORY

ENTER

RANDOM

DISPLAY

CLEAR

TOP MENU

ENTER

To close a folder (i.e., move back up

the directory tree), press the

[RETURN] button.

ENTER

RETURN

SETUP

DV-CP702

Remote controller

RETURN

AUDIO ANGLE SUBTITLE

RETURN

To get back to the root level, press the

[TOP MENU] button.

DISC

STEP/SLOW

STOP

DISC SKIP PROGRESSIVE DIMMER

PLAY/ENTER

To play a track, select it, and then

press the Play [ ] button (or the

[ENTER] button).

RC 542DV

When all the tracks in that folder have

been played, tracks in the next folder are

played.

Using the Disc Navigator

Remote controller

You can select the next or previous track

MP3

WMA

JPEG

during playback by using the Next [

and Previous [ ] buttons.

]

With the Disc Navigator you can select MP3, WMA, and

JPEG ﬁles.

If the disc contains MP3/WMA ﬁles and

JPEG ﬁles, they are played/displayed in

order. JPEG ﬁles will be displayed in a

slideshow. Press the [MENU] button to

display the ﬁrst nine pictures at thumb-

nail-size (see page 30). Depending on the

disc, the ﬁrst nine pictures may be dis-

played automatically.

Load and select a disc containing

MP3, WMA, or JPEG ﬁles.

See page 21 and page 22.

The Disc Navigator appears, as shown.

disc

Disc Navigator

MODE

001

0.00

002

– –

no.

Folder

Track

ROOT

001.ONKYO

002.RUN

Press the Stop [ ] button to stop

playback.

₃001.OVER_T

₃002.SONG_F

₃003.DONT_L

₃004.MOST_I

₃005.WELCOM

₃006.GO_AHE

₃007.STILL

Remote controller

₃008.GOOD_D

ENTER

Select

Selection

RETURN Back to previous

TOP MENU Back to top

The number of the currently selected disc

is shown on the disc icon. The Folder col-

umn lists the folders. The Track column

lists the tracks in the open folder.

Notes:

• If the selected JPEG ﬁle’s resolution is 640 x 480 pixels, a

thumbnail-size preview will be shown. If the resolution

exceeds 640 x 480, a preview will only be shown if the ﬁle

contains thumbnail image data.

The ﬁle information displayed depends on

the type of ﬁle selected, as follows:

• If the TV shape is set to “16:9 Compressed,” no thumbnail-

size preview will be displayed by the Disc Navigator.

MP3/WMA: Title, Artist Name, and

• You can use the Random Playback function to play a ran-

dom selection of MP3/WMA ﬁles (page 32).

Album Name.

JPEG:Thumbnail-size preview, File Size

and Date Created.

• During random playback, the remote controller’s naviga-

tion [ ], [ ], [ ], [ ] buttons cannot be used with the Disc

Navigator.

During playback, the following informa-

tion is displayed in the upper-right corner:

folder number, ﬁle number, and elapsed

time. During memory playback, the cur-

rent step number is displayed as well.

• You can use the Disc Navigator to create a playlist of MP3/

WMA ﬁles for memory playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 27 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

Memory Playback in the Disc Navigator

MP3

WMA

JPEG

You can compile a playlist of tracks and folders in the Disc

Navigator as follows.

With the Disc Navigator open,

press the [MEMORY] button.

Remote controller

The playlist appears in place of the ﬁle

MEMORY

information.

To add a track to the playlist, use

the [ ], [ ], [ ], [ ] buttons to select

it in the track column, and then

Remote controller

press the [ENTER] button.

ENTER

To add a folder to the playlist, you need to

select the folder at the top of the track col-

umn. “ALL” will be displayed in the play-

list.

Press the [MEMORY] button again to

MEMORY

open the Memory Play Setup window, on

which you can add titles, chapters, tracks,

and folders from any disc (see page 33).

To start memory playback, press

the Play [ ] button.

Remote controller

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 28 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

Press the Play [ ] button to start

playback of the speciﬁed track.

You can also select tracks while the DV-

CP702 is during playback by using the

Next [ ] and Previous [ ] buttons.

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

Number

buttons

RANDOM

DISPLAY

Remote controller

CLEAR

TOP MENU

DV-CP702

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

Notes:

• You can also select tracks by using the number buttons

without opening the Disc Navigator Search window.

PLAY/ENTER

DISC

STEP/SLOW

• If PBC is on (see page 43), and your Video CD supports

PBC (Playback Control), you may be able to select tracks

from an onscreen menu (see page 24).

DISC SKIP PROGRESSIVE DIMMER

RC 542DV

• With PBC Video CDs you can also use the number buttons

to select tracks from a menu.

• You can’t use the [SEARCH] button during random play-

back.

Selecting Tracks by Number

VCD

MP3

WMA

This section explains how to select tracks by number.

Fast Forward & Reverse

DVD

VCD

MP3

WMA

Load and select a Video CD, audio

CD, or MP3/WMA disc.

See page 21 and page 22.

The section explains how to fast forward and reverse.

■ Fast forward

During playback, press the Fast

Forward [ ] button to start fast

forward.

Press the [SEARCH] button during

playback.

Remote controller

The Disc Navigator Search window

appears onscreen, as shown.

Playback fast forwards and “Fast

Forward 1” appears onscreen.

disc

Disc Navigator

To change the fast-forward speed, press

the Fast Forward [ ] button repeatedly

to cycle through the speeds: Fast

no.

Disc

3:CD

Track

Current/Total -- /18

Remote controller

Forward 1, Fast Forward 2, and so on.

To resume normal playback, press

the Play [ ] button.

Use the number buttons to enter a

track number.

To enter, for example, “5,” press the [5]

button.

■ Fast reverse

During playback, press the Fast

Reverse [ ] button to start fast

reverse.

Remote controller

disc

Disc Navigator

Playback reverses and “Fast Reverse 1”

appears onscreen.

no.

Disc

3:CD

Track

Current/Total -5 /18

To change the fast-reverse speed, press

the Fast Reverse [ ] button repeatedly to

cycle through the speeds: Fast Reverse 1,

Fast Reverse 2, and so on.

To enter, for example, “18,” press the [1]

or [+10] button followed by the [8] button.

Remote controller

To resume normal playback, press

the Play [ ] button.

disc

Disc Navigator

no.

Disc

3:CD

Track

Current/Total 18 /18

Notes:

• There are ﬁve fast forward and fast reverse speeds for

DVD-Video discs and three forVideo CDs, audio CDs, and

MP3/WMA discs.

• No sound is output during fast forward or fast reverse of a

DVD-Video disc or Video CD.

• Sound is output intermittently during fast forward or fast

reverse of an audio CD or MP3/WMA disc.

• Fast reverse playback is not possible with WMA tracks.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 29Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

ON STANDBY

Slow-motion Playback

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

DVD

VCD

REPEAT

With the Slow-motion Playback function you can watch a

scene slowly either forward or backward.

RANDOM

DISPLAY

DV-CP702

CLEAR

TOP MENU

■ Forward

During playback, press the STEP/

SLOW [+] button.

ENTER

DIMMER

PLAY/ENTER

RETURN

SETUP

slow motion

AUDIO ANGLE SUBTITLE

Remote controller

Forward slow-motion playback starts and

“Slow 1” appears onscreen.

STEP/SLOW

DISC

STEP/SLOW

To change the slow-motion speed, press

the STEP/SLOW [+] button repeatedly to

cycle through the speeds: Slow 1, Slow 2,

and so on.

STEP/SLOW +/–

DIMMER

DISC SKIP PROGRESSIVE DIMMER

RC 542DV

■ Backward

During playback, press the STEP/

SLOW [–] button.

slow motion

Frame-by-Frame Playback

Remote controller

Backward slow-motion playback starts

and “Reverse Slow 1” appears onscreen.

STEP/SLOW

DVD

VCD

To change the slow-motion speed, press

the STEP/SLOW [–] button repeatedly to

cycle through the speeds: Reverse Slow 1,

Reverse Slow 2, and so on.

With the Frame-by-Frame Playback function you can view

individual frames one at a time either forward or backward.

■ Forward

frame-by-

frame

While paused, press the STEP/

SLOW [+] button.

Press the STEP/SLOW [+] button

repeatedly to view subsequent

frames.

■ Resume

To resume normal playback, press

the Play [ ] button.

playback

Remote controller

STEP/SLOW

Remote controller

■ Backward

frame-by-

frame

While paused, press the STEP/

SLOW [–] button.

Press the STEP/SLOW [–] button

repeatedly to view previous

frames.

Notes:

• There are four slow motion speeds for DVD-Video discs

and three for Video CDs.

Remote controller

• Backward slow-motion playback is not possible with

Video CDs.

STEP/SLOW

• No sound is output during slow-motion playback.

Adjusting the Display Brightness

DVD

VCD

MP3

WMA

JPEG

■ Resume

To resume normal playback, press

the Play [ ] button.

playback

You can adjust the brightness of the display as follows.

Remote controller

Press the [DIMMER] button repeat-

edly to cycle through the following

options: dim, dimmer, disc tray

light off, normal brightness.

Notes:

Remote controller

• Backward frame-by-frame playback is not possible with

Video CDs.

DIMMER

• You can improve the picture quality of frame-by-frame

playback with the Pause/Still setting (see page 43).

• With some discs, the picture may shake when using back-

ward frame-by-frame playback.

Notes:

• When the display brightness on another OnkyoAV compo-

nent connected via

is changed, the “disc tray light off”

• No sound is output during frame-by-frame playback.

option might not work.

• Prolonged display of the same picture or menu may cause

irreparable damage to your TV screen called screen burn-

in. To prevent this, don’t display the same frame for too

long. Your DV-CP702 features a screen saver to protect

your TV from the effects of burn-in (page 43).

• Even if you selected the “disc tray light off” option, the

disc tray light will come on when the disc tray is opened.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 30 Tuesday, February 10, 2004 10:12 AM

Basic Playback—Continued

To stop the slideshow, press the

[STOP] or [MENU] button.

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

Depending on the type of JPEG disc,

either the ﬁrst nine pictures appear in

thumbnail-size or the Disc Navigator win-

dow appears.

CHAIN

MODE

REPEAT

RANDOM

DISPLAY

Remote controller

CLEAR

DV-CP702

TOP MENU

The slideshow stops automatically when

all pictures have been displayed.

ENTER

CHAIN MODE

STOP

RETURN

SETUP

AUDIO ANGLE SUBTITLE

PLAY/ENTER

DISC

STEP/SLOW

Using JPEG CDs

The DV-CP702 supports JPEG CDs, so you can view your

photos on TV either individually or as a slideshow.

Using Chain Mode

DVD

VCD

MP3

WMA

Load and select a CD containing

JPEG pictures.

With the Chain mode function you can consecutively play all

discs, all DVD-Video discs and Video CDs, or all audio CDs

and MP3/WMA discs as if they were one big disc.

See “Using the Disc Navigator” on

page 26, and follow the procedure up to

step 4 so that the ﬁrst nine pictures are dis-

played at thumbnail-size before continu-

ing with this procedure.

Press the [CHAIN MODE] button

repeatedly to select CD, DVD, or

ALL.

The CHAIN MODE indicator ﬂashes

appear on the display.

With some JPEG discs, the ﬁrst nine pic-

tures automatically appear onscreen at

thumbnail-size when the disc is selected.

ALL: All discs are played consecutively.

Remote controller

Use the Next [ ] and Previous [

]

DVD: All DVD-Video discs and Video

CDs are played consecutively.

CHAIN MODE

buttons to display the next or previous

folder or page.

CD: All CDs (audio/MP3/WMA) are

played consecutively.

Use the [ ], [ ], [ ], [ ] buttons to select

a picture, and then press the Play [ ] or

[ENTER] button to start the slideshow.

While the CHAIN MODE indicator is

ﬂashing, press the Play [ ] or

[ENTER] button to start Chain

mode playback.

The Chain mode function will be can-

celled if you do not start playback within

If this folder icon is displayed in the

upper-left corner, selecting it and

pressing [ENTER] will open the Disc

Navigator window.

Remote controller

You can use the following func-

tions during the slideshow:

ﬁve seconds of pressing the [CHAIN

MODE] button.

To display the next or previous picture, use

the Next [ ] and Previous [ ] buttons.

ENTER

To turn a picture upside down, use the Up/

Down [ ]/[ ] buttons (not while zoomed

in).

To rotate a picture clockwise or counter-

clockwise, use the Left/Right [ ]/[ ] but-

tons (not while zoomed in).

Notes:

• With the DVD and All Chain modes, Video CD PBC

menus are ignored.

• JPEG ﬁles are skipped during Chain mode playback.

To pause the slideshow, press the but-

ton. Press the Play [ ] button to resume.

• With the DVD and All Chain modes, DVD-Video menus

are ignored and titles are played automatically. This may

not work with some discs.

To zoom in or out, use the Fast Forward

[

] and Fast Reverse [ ] buttons. Use

• You can’t use the repeat functions with Chain mode play-

back.

the Left/Right [ ]/[ ] and Up/Down [ ]/

[ ] buttons to move around the picture

while zoomed in. The slideshow pauses

while zoomed in. To cancel the zoom,

press the Play [ ] button.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 31 Tuesday, February 10, 2004 10:12 AM

Advanced Playback

Notes:

• The Time Search function works only within the currently

playing title (DVD-Video) or track (Video CD, audio CD).

For example, if the current title is one hour long and you

enter the time 1 hour, 30 minutes, nothing will happen.

DV-CP702

• In some cases, playback may start from a slightly different

point to the one you speciﬁed.

REPEAT

PLAY/ENTER

• Time Search may not work with some discs.

ON STANDBY

OPEN/

• You can’t use the [SEARCH] button during random play-

back.

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

Number

buttons

RANDOM

DISPLAY

CLEAR

Repeat Playback

TOP MENU

DVD

VCD

MP3

WMA

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

With the Repeat Playback function you can play the current

disc, title, chapter, track, or folder of MP3/WMA ﬁles over-

and-over again.

DISC

STEP/SLOW

Press the [REPEAT] button repeat-

edly to select a repeat option.

The currently selected repeat option

appears onscreen and “REPEAT” appears

on the display.

Locating Speciﬁc Points in Time

DVD

VCD

With the Time Search function you can locate speciﬁc points

in time.

The available options depend on the cur-

rent disc type, as follows:

Remote controller

Press the [SEARCH] button twice.

The Disc Navigator Search window

appears onscreen, as shown.

REPEAT

Remote controller

DVD-Video: Chapter, Title, 1 Disc, All

Disc.

disc

Disc Navigator

Video CD: 1 Disc, All Disc.

no.

Audio CD: Track, 1 Disc, All Disc.

Disc

Time

6:DVD

-- : -- : --

MP3/WMA: Track, Folder, 1 Disc, All

Disc.

Use the number buttons to enter a

time.

To enter, for example, 1 hour, 25 minutes,

30 seconds, press the [1], [2], [5], [3], and

[0] buttons.

Press the Play [ ] button to start

repeat playback.

Remote controller

disc

Disc Navigator

To cancel Repeat Playback, use the

[REPEAT] button to select Off.

no.

Remote controller

Disc

Time

6:DVD

1:25:30

REPEAT

To enter, for example, 2 minutes, 15 sec-

onds, press the [2], [1], and [5] buttons.

disc

Disc Navigator

Notes:

no.

• Repeat Playback may not work with some DVD-Video

discs.

Disc

6:DVD

Time

0:02:15

• If you press the [REPEAT] button while the Memory Play-

back function is on (see page 33), the current memory list

will play repeatedly.

• With PBCVideo CDs, you can’t select Repeat Playback. In

this case, you need to cancel PBC playback ﬁrst, and then

select Repeat Playback.

Press the Play [ ] button to locate

the speciﬁed point.

Playback starts from the speciﬁed point.

• You can’t use the repeat functions with Chain mode play-

back.

Remote controller

• If you select another disc, repeat playback is cancelled.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 32 Tuesday, February 10, 2004 10:12 AM

Advanced Playback—Continued

Select a disc.

See page 22.

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

Press the [RANDOM] button

repeatedly to select a random

option.

A-B

RANDOM

Remote controller

RANDOM

DISPLAY

RANDOM

CLEAR

DV-CP702

TOP MENU

CLEAR

The currently selected random option

appears onscreen and “RANDOM”

appears on the display.

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

PLAY/ENTER

The available options depend on the cur-

rent disc type, as follows:

DISC

STEP/SLOW

DVD-Video: Title, 1 Disc, All Disc.

Video CD/audio CD: 1 Disc, All Disc.

A–B Repeat Playback

MP3/WMA: Folder, 1 Disc, All Disc

(ﬁles in subfolders are not played).

DVD

VCD

With the “Title” option, chapters within

the current title are played at random.

With the “1 Disc” option, all titles, chap-

ters, tracks, and folders on the current disc

are played at random.

With the A–B Repeat Playback function you can play a spec-

iﬁed section over-and-over again.

During playback, press the [A–B]

button to set the A point (i.e., the

start of the section you want to

Remote controller

If you press the [RANDOM] button dur-

ing playback, random playback begins

after the current disc, title, chapter, track,

or MP3/WMA folder has ﬁnished.

A B

repeat).

“A–” appears onscreen and “R_A”

appears on the display

Press the [A–B] button again to set

the B point (i.e., the end of the sec-

tion you want to repeat).

Press the Play [ ] button to start

random playback.

Random playback starts.

Remote controller

A B

Playback repeats between the A and B

points, and “A–B” appears onscreen and

“R_AB” appears on the display.

Remote controller

To cancel A–B Repeat Playback,

press the [CLEAR] button, or use

the [A–B] button to select Off.

To cancel random playback, use

the [RANDOM] button to select Off.

Remote controller

CLEAR

Remote controller

RANDOM

A B

Notes:

• To select the next random disc, title, chapter, track, or

MP3/WMA folder during random playback, press the Next

Notes:

• A–B Repeat Playback may not work with some

DVD-Video discs and PBC Video CDs.

[

] button.

• Random playback may not work with some DVD-Video

discs.

• In some cases, the A and B points may be at slightly differ-

ent points to the ones you speciﬁed.

• With PBC Video CDs, you can’t use this function. Cancel

PBC playback ﬁrst, and then set this function.

• If you select a different camera angle during A–B repeat

playback, the original camera angle will be selected when

playback restarts from the A point.

• Random playback cannot be used with the Memory Play-

back function.

• You can’t use the [SEARCH] button during random play-

back.

Random Playback

DVD

VCD

MP3

WMA

• During random playback, the remote controller’s naviga-

tion [ ], [ ], [ ], [ ] buttons don’t work in the Disc Nav-

igator.

With the Random Playback function you can enjoy a random

selection of discs, titles, chapters, tracks, or MP3/WMA

folders.

• If you select another disc, random playback is cancelled,

except when the random option is set to “All Disc,” in

which case playback continues.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 33 Tuesday, February 10, 2004 10:12 AM

Advanced Playback—Continued

Repeat steps 2 and 3 to add more

items to the memory list.

New items will be added to the memory

list as steps 02, 03, and so on.

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

MEMORY

CLEAR

REPEAT

Number

buttons

RANDOM

DISPLAY

To play the memory list, press the

Play [ ] button.

CLEAR

TOP MENU

Remote controller

ENTER

The Memory Play Setup window must be

open when you press the Play [ ] button.

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

ANGLE

DISC

STEP/SLOW

Memory Playback

To stop playback, press the Stop

[ ] button.

DVD

VCD

MP3

WMA

JPEG

Remote controller

With the Memory Playback function you can create your

own memory list of titles, chapters, and tracks.

Press the [MEMORY] button.

The Memory Play Setup window appears

onscreen, as shown.

To insert a new item into the mem-

ory list, use the Left/Right [ ]/[ ]

buttons to select the list, use the

Up/Down [ ]/[ ] buttons to select

the step before which you want to

insert the new item, and then press

the [ENTER] button.

Remote controller

MEMORY

Disc Navigator

Memory Play Setup

ENTER

Memory List

Title/Folder

6:DVD Current/Total 001/ --- Current/Total --- / ---

No. Disc

Chapter/Track

01. - : ---

02. - : ---

03. - : ---

--- / ---

The cursor moves to the top row and the

selected step remains highlighted.

The top row ( ) is used to enter disc, title/

folder, and chapter/track numbers. Steps

in the memory list are numbered sequen-

tially.

Disc Navigator

Memory Play Setup

Memory List

Title/Folder

6:DVD Current/Total 001/ --- Current/Total --- / ---

No. Disc

Chapter/Track

01. 6:DVD

02. - : ---

03. 6:DVD

001/ ---

--- / ---

001/ ---

003/ ---

--- / ---

003/ ---

Enter the disc, title/folder, and

chapter/track numbers of the item

you want to add to the memory list.

Use the remote controller’s Left/Right

[ ]/[ ] buttons to select the parameters,

and use the Up/Down [ ]/[ ] buttons to

select numbers from 001 to 999.

Remote controller

Enter the disc, title/folder, and

chapter/track numbers of the item

to be inserted.

ENTER

Press the [ENTER] button.

The new item is inserted into the memory

list and subsequent items move down the

list.

The number of the currently selected disc

is already entered.

You can enter numbers directly by using

the remote controller’s number buttons.

To delete a step, use the Left/Right

[ ]/[ ] buttons to select the list, use

the Up/Down [ ]/[ ] buttons to

select it, and then press the

[CLEAR] button.

Remote controller

To add the all titles, folders, chapters, or

tracks on the disc, select the top row ( ),

and then press the Down [ ] button.

ENTER

The item is deleted and subsequent items

move up the list.

Press the [ENTER] button.

The new item is added to the memory list

as step 01.

Remote controller

CLEAR

ENTER

Disc Navigator

Memory Play Setup

Memory List

Title/Folder

6:DVD Current/Total 001/ --- Current/Total --- / ---

No. Disc

Chapter/Track

01. 6:DVD

02. - : ---

03. - : ---

001/ ---

--- / ---

003/ ---

--- / ---

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 34 Tuesday, February 10, 2004 10:12 AM

Advanced Playback—Continued

Selecting Camera Angles

To edit a step, use the Left/Right

[ ]/[ ] buttons to select the list, use

the Up/Down [ ]/[ ] buttons to

DVD

Remote controller

Some DVD-Video discs feature multiple camera angles that

allows you to view scenes from different angles. If the cur-

rently playing DVD-Video disc features multiple camera

angles, the camera indicator appears onscreen and on the

display. Such a disc usually has the multiple camera angle

logo ( ) printed on its sleeve notes.

select the step, and then use the

Left/Right [ ]/[ ] buttons to select

the top row ( ) again.

Edit the disc, title/folder, and chap-

ter/track numbers, and then press

the [ENTER] button.

ENTER

Remote controller

Press the [ANGLE] button repeat-

edly to cycle through the available

camera angles.

To close the Memory Play Setup

window, press the [MEMORY] but-

ton.

ANGLE

Remote controller

MEMORY

The number of the currently selected

camera angle appears onscreen. For

example, on a disc with three camera

angles, you’d see 1/3, 2/3, and 3/3.

Notes:

• The entire memory list is cleared when the DV-CP702 is

set to Standby.

Notes:

• With some DVD-Video discs you may not be able to select

different camera angles even though the camera indica-

tor is displayed.

• With PBC Video CDs, you can’t use this function. Cancel

PBC playback ﬁrst, and then set this function.

• A playlist of MP3/WMA ﬁles can be made using the Disc

Navigator (see page 26).

• With some DVD-Video discs you can select camera angles

from a menu.

• Some DVD-Video discs won’t allow you to select different

camera angles while playback is paused.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 35 Tuesday, February 10, 2004 10:12 AM

Advanced Playback—Continued

Remote controller

During playback, press the [SUBTI-

TLE] button repeatedly to cycle

through the available subtitles.

SUBTITLE

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

REPEAT

The name of the selected subtitle appears

onscreen for several seconds.

RANDOM

DISPLAY

To turn off subtitles, use the [SUBTITLE]

button to select Off.

CLEAR

TOP MENU

ENTER

RETURN

SETUP

Notes:

AUDIO ANGLE SUBTITLE

AUDIO

SUBTITLE

• With DVD-Video discs, when you stop playback and can-

cel the Resume function (see page 22), or select another

disc, the subtitle language will revert to your default subtile

language (see page 42), or the disc’s default subtitle lan-

guage.

DISC

STEP/SLOW

DISC SKIP PROGRESSIVE DIMMER

PROGRESSIVE

RC 542DV

• With some DVD-Video discs you can select subtitles from

a menu, and you may not be able to select subtitles during

playback.

• To check the subtitle language currently selected, press the

[SUBTITLE] button once. The current setting will appear

onscreen for several seconds.

Selecting Languages & Audio Formats

DVD

VCD

Some DVD-Video discs feature soundtracks in several lan-

guages and audio formats (e.g., Dolby Digital or DTS).

Music DVD-Video discs sometimes feature soundtracks in

several audio formats, such as PCM or Dolby Digital 5.1. See

the disc’s sleeve notes for details.

Using Progressive Scanning

With the Progressive Scanning function you can enjoy better

picture quality. To use Progressive Scanning, your TV or pro-

jector must support progressive scanning and you must con-

nect it to the DV-CP702’s component video outputs (see

page 17).

Remote controller

During playback,press the [AUDIO]

button repeatedly to cycle through

the available soundtracks.

AUDIO

Press the [PROGRESSIVE] button.

Progressive scanning is enabled and the

PRGV indicator appears on the display.

The name of the selected soundtrack

appears onscreen for several seconds.

Remote controller

PROGRESSIVE

For Video CDs, you can select stereo,

Mono L (left), or Mono R (right).

Notes:

To turn off progressive scanning,

press the [PROGRESSIVE] button

again.

• With DVD-Video discs, when you stop playback and can-

cel the Resume function (see page 22), or select another

disc, the soundtrack language will revert to your default

language (see page 42), or the disc’s default language.

Remote controller

PROGRESSIVE

The PRGV indicator disappears.

• With some discs, selecting another soundtrack may cause

the picture to skip momentarily.

Notes:

• To listen to just the accompaniment on a karaoke CD,

select the Mono L (left) or Mono R (right) channel. See the

disc’s sleeve notes for details.

• If your TV or projector doesn’t support progressive scan-

ning and it’s connected to the DV-CP702’s component

video outputs, if you turn on the Progressive Scanning

function, you’ll get no picture.

• With some DVD-Video discs you need to select

soundtracks from a menu, and you may not be able to

select other soundtracks during playback.

• The S-Video and composite video outputs are not affected

by the Progressive Scanning function.

• Progressive scanning cannot be turned on or off during

playback. You must stop playback ﬁrst.

Selecting Subtitles

• Progressive scanning cannot be turned on or off while the

Disc Navigator is displayed.

DVD

• See also the Progressive Setting on page 40.

Some DVD-Video discs feature subtitles in several lan-

guages. See the disc’s sleeve notes for details.

• On theAustralian model, progressive scanning can be used

with NTSC format discs. To do this, set the PAL Output

Setting to “AUTO,” start playback of an NTSC disc, stop

playback, and then turn on the Progressive Scanning func-

tion.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 36 Tuesday, February 10, 2004 10:12 AM

Advanced Playback—Continued

To resume playback from last mem-

ory point, select “Yes,” and then

press [ENTER].

To start playback from the beginning,

select “No,” and then press [ENTER].

Remote controller

ENTER

DV-CP702

To start playback from the beginning and

delete the last memory point, select

“Memory Clear,” and then press

[ENTER].

DISPLAY

LAST MEMORY

STOP

PLAY/ENTER

ON STANDBY

OPEN/

SEARCH LAST

MEMORY CHAIN MODE

Notes:

REPEAT

LAST M

ENTER

• The Last Memory function can store the settings for up to

six DVD-Video discs. When you set the Last Memory

function for a seventh disc, the ﬁrst disc’s settings are lost.

RANDOM

DISPLAY

CLEAR

DISPLAY

TOP MENU

• The Last Memory function can remember the settings for

oneVideo CD, and those settings will be lost when another

disc is selected.

ENTER

RETURN

SETUP

AUDIO ANGLE SUBTITLE

• The Last Memory function may not work properly with

some PBC Video CDs.

DISC

STEP/SLOW

• The Last Memory function will not work while a menu is

being displayed onscreen.

Using Last Memory

• The Last Memory function may not work with some

DVD-Video discs.

DVD

VCD

• Even if you select another disc, or inadvertently turn off the

DV-CP702 during playback, you can resume playback

from the same point when you select the disc again.

With the Last Memory function you can resume playback

from where you left off even if another disc has been selected

or the disc has been removed. Last Memory also remembers

the soundtrack and subtitle languages that you were using.

During playback, press the

[LAST M] button.

The last memory point for the disc is

stored, the LAST indicator appears, and

“LAST MEM” appears on the display.

Remote controller

If the [LAST M] button is pressed again,

the last memory point will be updated.

LAST M

To stop playback, press the Stop

[ ] button once or twice.

At this point you may choose to

play another disc, or to turn off the

DV-CP702.

Remote controller

To resume playback,select the disc

and press the Play [ ] button.

The Last Memory dialog box appears, as

shown.

Last Memory is set.

Remote controller

Start playback from memory location ?

Yes

Memory Clear

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 37 Tuesday, February 10, 2004 10:12 AM

Advanced Playback—Continued

Displaying Information

You can display various information about the current disc,

title, chapter, or track as follows.

During playback, press the [DIS-

PLAY] button.

Various information appears onscreen.

The operating status (e.g., Stop, Play,

Resume), disc number, and disc type

information is displayed along the top of

Remote controller

DISPLAY

the screen.

The other information depends on the

type of disc currently selected, as follows:

DVD-Video: Current title number, total

number of titles on disc, elapsed title time,

remaining title time, total title time,

selected soundtrack, selected subtitle, and

the number of available camera angles.

Video CD, audio CD: Current track

number, total number of tracks, elapsed

track time, remaining track time, and total

track time.

MP3/WMA disc: Track name, current

track, elapsed track time, folder name,

current folder, total number of tracks,

total number of folders.

Press the [DISPLAY] button again

to see more information.

DVD-Video: Current chapter number,

total number of chapters in title, elapsed

chapter time, remaining chapter time,

total chapter time, and bit rate.

Remote controller

DISPLAY

Video CD, audio CD: Current track

number, total number of tracks, elapsed

disc time, remaining disc time, and total

disc time. (Does not work with PBC

Video CDs.)

MP3/WMA disc: Title, artist name,

album name, year, genre, comment.

Press the [DISPLAY] button again

to cancel the information display.

Remote controller

DISPLAY

If the current disc is an MP3/WMA

disc, and you want to open the Disc

Navigator, press the [DISPLAY] but-

ton again.

Remote controller

DISPLAY

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 38 Tuesday, February 10, 2004 10:12 AM

Conﬁguring the DV-CP702

This chapter explains the various functions and settings of

the onscreen setup menus.

The following table lists all the functions and settings, with a

brief description and page number where you can ﬁnd full

details.

Functions and settings are arranged into six menus: Picture,

Audio, Language, Display, Operation Setting, and Initial.

Setting

Description

Page #

TV Shape

Select a picture format to match the aspect ratio of your TV.

Adjust the picture quality for interlaced scanning.

Adjust the picture quality for progressive scanning.

Picture

Interlaced Setting

Progressive Setting

PAL Output Setting

(Australian model only)

Specify how the DV-CP702 outputs video signals when playing NTSC discs.

Dolby Digital Out Select whether or not the DV-CP702 downmixes Dolby Digital digital audio.

Linear PCM Out Select whether or not the DV-CP702 downsamples 96 kHz digital audio.

Audio

Digital Out

MPEG Out

Digital Out

Select whether or not the DV-CP702 downmixes MPEG digital audio.

Turn on or off the digital audio outputs.

Dynamic Range Control

(Dolby Digital only)

Set the Dynamic Range function.

On-Screen Language

Disc Menu Language

Audio Language

Subtitle

Select a language for the onscreen setup menus and messages.

Select your preferred language for disc menus.

Select your preferred language for soundtracks.

Select your preferred language for subtitles.

Turn on or off onscreen messages and indicators.

Select a color for onscreen setup menus and messages.

Select a background color for when playback is stopped.

Set the Screen Saver function.

Language

Display

On-Screen Display

On-Screen Display Color

Background

Screen Saver

Pause/Still

Select Auto or Frame for still pictures.

Operation

Setting

Parental Lock

PBC

Set the Parental Lock function.

Turn on or off PBC (Playback Control) functions for Video CDs.

Auto Power Off

Set the Auto Power Off function.

TV Shape

Initial Setup

This menu appears automatically the very ﬁrst time you turn on your DV-CP702.

(These settings are available in other menus.)

On-Screen Language

Digital Out

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 39Tuesday, February 10, 2004 10:12 AM

Conﬁguring the DV-CP702—Continued

Picture Menu

RANDOM

DISPLAY

TV Shape

CLEAR

TOP MENU

DVD

ENTER

With this setting you can select a picture format to match the

aspect ratio of your TV.

RETURN

SETUP

AUDIO ANGLE SUBTITLE

4:3 Letter box (default): Choose this option if you have

a standard TV (4:3 aspect ratio). When you watch wide-

screen DVD-Video movies, the entire picture will be vis-

ible and there will be black bars at the top and bottom of

the screen, as shown.

DISC

STEP/SLOW

Using the Onscreen Setup Menus

This section explains how to use the onscreen setup menus.

Widescreen DVD movie

on standard TV with

"4:3 Letter box" setting

Turn on your DV-CP702 and TV.

On your TV, select the video input to

which the DV-CP702 is connected.

4:3 Normal (Pan & Scan): Choose this option if you

have a standard TV (4:3 aspect ratio) and want to use the

full height of the screen when watching widescreen

DVD-Video movies. In order to use the full height of the

screen, the picture will be cropped on both sides, as

shown. This option won’t work with discs that don’t support

pan and scan.

Press the [SETUP] button.

The onscreen setup menu appears, as

shown.

Remote controller

SETUP

Picture

TV Shape

Interlaced Setting

Progressive Setting

Widescreen DVD movie

on standard TV with

"4:3 Normal" setting

16:9 Widescreen: Choose this option if you have a wide-

screen TV (16:9 aspect ratio).

Use the remote controller’s naviga-

tion buttons to navigate the menus.

Remote controller

Use the Left/Right [ ]/[ ] buttons to

move left or right. Use the Up/Down [ ]/

[ ] buttons to move up or down.

16:9 Compressed: Choose this option if you have a

widescreen TV (16:9 aspect ratio) and the picture appears

stretched when watching programs in 4:3 format, as

shown. Some widescreen TVs have a setting to correct

this. If your TV doesn’t, and 4:3 programs appear

stretched, select this option to correct the problem.

ENTER

When you’ve selected an item,

press the [ENTER] button to see

the available options.

Remote controller

4:3 program on widescreen TV

with "16:9 Compressed" setting

ENTER

Notes:

Use the navigation buttons to

select the options, and press the

[ENTER] button to conﬁrm your

selection.

• With some DVD-Video discs this setting may have no

effect. See the disc’s sleeve notes to see which picture for-

mat is used.

Remote controller

ENTER

When you’ve ﬁnished, press the

[SETUP] button again.

Remote controller

The onscreen setup menu closes.

SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 40 Tuesday, February 10, 2004 10:12 AM

Conﬁguring the DV-CP702—Continued

There are three memories (1, 2, 3) for storing your favorite

settings. You could, for example, use one for daytime view-

ing (e.g., sun shining through window) and one for nighttime

viewing (e.g., curtains drawn, lights down).

RANDOM

DISPLAY

CLEAR

TOP MENU

ENTER

RETURN

SETUP

Parameter

Contrast

Brightness

Color

Range

SETUP

AUDIO ANGLE SUBTITLE

–7...0...+7

0...+8

DISC

STEP/SLOW

Tint

Interlaced Setting

Sharpness

Skin Tone Compensation –7...0...+7

DVD

With these settings you can adjust various picture quality

parameters for interlaced scanning, including black level,

contrast, brightness, color, and so on.

Select Progressive Setting 1, 2, or

3, and then press the [ENTER] or

Right [ ] button.

Remote controller

There are three memories (1, 2, 3) for storing your favorite

settings. You could, for example, use one for daytime view-

ing (e.g., sun shining through window) and one for nighttime

viewing (e.g., curtains drawn, lights down).

The parameters appear onscreen.

ENTER

The parameters are as follows.

Use the Up/Down [ ]/[ ] buttons to

select the parameters, press the

[ENTER] button, and use the Left/

Right [ ]/[ ] buttons to set them.

Parameter

Contrast

Brightness

Color

Range

Remote controller

–7...0...+7

0...+8

ENTER

Tint

Sharpness

Skin Tone Compensation –7...0...+7

When you’ve ﬁnished, press the

[SETUP] button.

The settings are stored.

Dark, Normal (U.S. model only)

Video Black Level

Remote controller

Normal, Light (Australian model only)

SETUP

Select Interlaced Setting 1, 2, or 3,

and then press the [ENTER] or

Right [ ] button.

Remote controller

The parameters appear onscreen.

Notes:

ENTER

• These settings are used only when the Progressive function

is on.

Use the Up/Down [ ]/[ ] buttons to

select the parameters, press the

[ENTER] button, and use the Left/

Right [ ]/[ ] buttons to set them.

PAL Output Setting (Australian model only)

Remote controller

DVD

VCD

With this setting you can specify how the DV-CP702 outputs

video signals when playing NTSC format DVD-Video discs

or Video CDs.

ENTER

AUTO (default): Use this option to watch PAL and NTSC

format discs. The DV-CP702 does not convert the video

format. When you play a PAL disc, the video output will

be PAL format.And when you play an NTSC disc, it’ll be

NTSC format. Your TV must support NTSC playback in

order to watch NTSC format discs.

When you’ve ﬁnished, press the

[SETUP] button.

The settings are stored.

Remote controller

SETUP

Notes:

PAL: Use this option if your TV doesn’t support NTSC

playback, or the picture is distorted when watching

NTSC discs. The DV-CP702 will convert NTSC format

video signals to PAL-compatible format.

• These settings are used only when the Progressive function

is off.

Notes:

Progressive Setting

• This setting can be changed only when playback is

stopped.

DVD

With these settings you can adjust various picture quality

parameters for progressive scanning, including black level,

contrast, brightness, color, and so on.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 41 Tuesday, February 10, 2004 10:12 AM

Conﬁguring the DV-CP702—Continued

■ Digital Out

Audio Menu

DVD

VCD

MP3

WMA

With this setting you can turn the coaxial and optical digital

audio outputs on or off.

Digital Out

With these settings you can specify how the DV-CP702 out-

puts digital audio signals. The options you choose will

depend on the type of AV component that you connect to the

DV-CP702’s digital audio outputs.

Depending on how you connect the DV-CP702 to your other

AV components, there may be situations where it’s helpful to

be able to turn off the digital audio outputs.

On (default): Digital audio signals are output by the

coaxial and optical digital audio outputs.

■ Dolby Digital Out

DVD

Off: Nothing is output by the coaxial and optical digital

audio outputs.

With this setting you can conﬁgure the DV-CP702 to output

Dolby Digital audio as it is or downmix it to 2-channel PCM.

Notes:

If you’re connecting the DV-CP702’s digital audio outputs to

an AV component with a built-in Dolby Digital decoder,

select Dolby Digital. If you’re connecting to a hi-ﬁ amp with

a digital input, an AV receiver with a built-in Dolby Pro

Logic decoder, or an external D/A converter, select Dolby

Digital > PCM.

• This setting has no effect on the analog audio outputs.

Dynamic Range Control (Dolby Digital only)

DVD

Dolby Digital (default): Dolby Digital audio is output as

it is.

With the Dynamic Range Control function you can reduce

the dynamic range of Dolby Digital material so that you can

still hear quiet parts even when listening at low volume lev-

els—ideal for watching movies late at night when you don’t

want to disturb anyone.

Dolby Digital > PCM: Dolby Digital audio is downmixed

and output as 2-channel PCM digital audio.

■ Linear PCM Out

DVD

Off (default): The full dynamic range is preserved.

On: The dynamic range of Dolby Digital material is com-

pressed.

With this setting you can conﬁgure the DV-CP702 to output

digital audio with higher sampling rates (e.g., 96 kHz) as it is

or downsample it to 48 kHz.

Notes:

• The impact of the Dynamic Range Control function

depends on the Dolby Digital material that you are playing

and with some material there will be little or no effect.

If the AV component you connect to the DV-CP702’s digital

audio outputs supports 96 kHz digital audio, select Down

Sample Off. Otherwise, select Down Sample On.

Down Sample On (default): 96 kHz digital audio is

downsampled and output at 48 kHz.

Language Menu

Down Sample Off: 96 kHz digital audio is output as it is.

On-Screen Language

Notes:

DVD

VCD

MP3

WMA

JPEG

• Some copy-protected DVD-Video discs may use 96 kHz

digital audio only for A/D conversion to the analog audio

outputs.

With this setting you can select a language for the onscreen

setup menus and messages.

• With some discs, even if you select Down Sample Off, the

digital audio will be downsampled to 48 kHz, and in some

cases may not be output by the DV-CP702’s digital audio

outputs.

English (default): English.

Français: French.

Español: Spanish.

Deutsch: German.

Italiano: Italian.

■ MPEG Out

DVD

VCD

With this setting you can conﬁgure the DV-CP702 to output

MPEG digital audio as it is or downmix it to PCM.

If you’re connecting the DV-CP702’s digital audio outputs to

an AV component with a built-in MPEG decoder, select

MPEG. Otherwise, select MPEG > PCM.

MPEG (default): MPEG digital audio is output as it is.

MPEG > PCM: MPEG digital audio is downmixed and

output as PCM digital audio.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 42 Tuesday, February 10, 2004 10:12 AM

Conﬁguring the DV-CP702—Continued

Disc Menu Language

Subtitle

DVD

With this setting you can select your preferred language for

disc menus. When you play a DVD-Video disc with multiple

language disc menus, your preferred language will be

selected automatically.

With this setting you can select your preferred language for

subtitles. When you play a DVD-Video disc with multiple

language subtitles, your preferred language will be selected

automatically.

English (default):

French:

Spanish:

German:

Italian:

Others: See “Selecting Other Languages” on page 44.

No Subtitle: No subtitles will be displayed. This option

is useful with DVD-Video discs that always display sub-

titles.

Notes:

• Not all DVD-Video discs have menus in multiple lan-

guages.

Others: See “Selecting Other Languages” on page 44.

• Even if a DVD-Video disc has menus in multiple lan-

guages, this setting may not always work.

Notes:

• Not all DVD-Video discs have subtitles.

• If a DVD has only one menu language, that will be used.

• Even if a DVD-Video disc has subtitles in multiple lan-

guages, this setting may not always work.

• With some DVD-Video discs you can select languages

from a menu.

• If a DVD has only one subtitle language, that will be used.

• With some DVD-Video discs you can select subtitles from

a menu.

Audio Language

DVD

Display Menu

With this setting you can select your preferred language for

soundtracks. When you play a DVD-Video disc with multi-

ple language soundtracks, your preferred language will be

selected automatically.

On-Screen Display

DVD

With this setting you can turn on or off onscreen messages,

such as “Play,” “Stop,” and “Resume.”

English (default):

French:

Off: Onscreen messages are not displayed.

Spanish:

On (default): Onscreen messages are displayed.

German:

Italian:

On-Screen Display Color

Others: See “Selecting Other Languages” on page 44.

DVD

VCD

MP3

WMA

JPEG

Notes:

• Not all DVD-Video discs have soundtracks in multiple lan-

guages.

With this setting you can set the color and theme of the Disc

Navigator window.

• Even if a DVD-Video disc has soundtracks in multiple lan-

guages, this setting may not always work.

Sapphire (default):

Pearl:

• If a DVD has only one soundtrack, that will be used.

Amethyst:

Garnet:

• With some DVD-Video discs you can select languages

from a menu.

Background

DVD

VCD

MP3

WMA

With this setting you can select the color of the background

that’s displayed when the DV-CP702 is stopped.

Blue:

Gray:

Graphic (default): The theme picture speciﬁed for the

On-Screen Display Color setting is used.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 43 Tuesday, February 10, 2004 10:12 AM

Conﬁguring the DV-CP702—Continued

Screen Saver

Use the Up/Down [ ]/[ ] buttons to

specify the parental lock level from

1 through 8, and then press

[ENTER].

DVD

VCD

MP3

WMA

JPEG

Remote controller

With the Screen Saver function you can protect your TV

against screen burn-in, which can occur when the same

image or menu is displayed for a long time.

ENTER

The parental lock is now set.

The parental lock levels conform to U.S.

movie ratings as follows:

Off: Screen saver off.

On (default): Screen saver on.

• Level 7: NC-17

• Level 6: R

• Level 4: PG13

• Level 3: PG

• Level 1: G

When the Screen Saver function is set to On, and DVD-Video

or Video CD playback is paused or stopped for 15 minutes,

the Screen Saver function automatically displays a moving

image.

Once the screen saver has been activated, you can cancel it

by pressing either the Play [ ] button or Pause [ ] button.

When you’ve ﬁnished, press the

[SETUP] button.

The settings are stored.

Notes:

Remote controller

• The Screen Saver function also works with audio CDs and

MP3/WMA discs. If you leave playback paused for ﬁve

minutes, the screen saver will activate.

SETUP

Operation Setting Menu

Notes:

• When entering a security code, you can use the [CLEAR]

button to delete the numbers entered so far, if necessary.

Pause/Still

DVD

• This setting can be changed only when playback is

stopped.

The Pause/Still setting determines how still pictures are dis-

played when DVD-Video playback is paused or when using

frame-by-frame playback.

• Once this setting has been turned on and a security code

set, if you want to turn off parental lock, or change the

parental lock level, you’ll be prompted to enter the security

code.

Auto (default): A frame or ﬁeld is displayed depending

on the disc.

• Not all discs use parental lock. See the disc’s sleeve notes

for details.

Frame: A frame is displayed.

TV pictures are made up of ﬁelds, and there are two ﬁelds per

picture (frame). In general, the Frame option will provide the

best picture quality, although in some cases the picture may

appear slightly blurred. Since a ﬁeld has only half as much

information, the picture quality will be lower, but it won’t be

blurred.

• Discs with parental lock may cut certain scenes, replace

certain scenes with children-friendly scenes, or prevent

playback of the entire disc.

• If you forget the security code, instead of entering the num-

bers, press the STOP [ ] button four times.

• When using a disc that uses parental control to restrict

playback, occasionally, depending on the DV-CP702’s

operating status, you may not be able to remove the disc by

using the [OPEN/CLOSE] button. If this does occur, close

the disc tray, use the [DISC SKIP] button to select another

disc bay, open the tray again, and then remove the disc.

Parental Lock

DVD

With the Parental Lock function you can block access to cer-

tain scenes that the authors have ﬂagged as being unsuitable

for children.

PBC

Select Parental Lock–>On, and

then press the [ENTER] button.

VCD

Remote controller

With the PBC setting you can enable or disable PBC (Play-

back Control) functions on Video CDs.

The Security Code box appears onscreen.

ENTER

Off: PBC functions disabled.

On (default): PBC functions enabled.

Use the number buttons to enter a

4-digit security code, and then

press [ENTER].

The Level box appears onscreen.

Notes:

• PBC functionality varies from disc-to-disc. See the disc’s

sleeve notes for details.

Remote controller

ENTER

• Not all PBC Video CDs use all of the PBC functions sup-

ported by the DV-CP702

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 44 Tuesday, February 10, 2004 10:12 AM

Conﬁguring the DV-CP702—Continued

Auto Power Off

Language Code List

DVD

VCD

MP3

WMA

JPEG

Use this list when specifying other languages.

With the Auto Power Off function the DV-CP702 will turn

itself off automatically if about 20 minutes have elapsed

without any operation after stopping playback.

Language

Japanese

English

French

German

Italian

Code

Language

Kirghiz

Latin

Code

Lingala

Off (default): Auto Power Off function is off.

Laothian

Lithuanian

Latvian

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

On: Auto Power Off function on.

Spanish

Chinese

Dutch

Portuguese

Swedish

Russian

Korean

Initial Setup Menu

This menu appears automatically the very ﬁrst time you turn

on the DV-CP702. See “First Time Setup” on page 20 for

more information.

Greek

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Esperanto

Estonian

Basque

Persian

Finnish

Selecting Other Languages

Nepali

This section explains how to select other languages for disc

menus, audio, and subtitles.

Norwegian

Occitan

Oromo

Oriya

Panjabi

Polish

Select“Others”from the Disc Menu

Language, Audio Language, or

Subtitle menu, and then press

[ENTER].

Remote controller

Pashto, Pushto

Quechua

Rhaeto-Romance

Kirundi

Romanian

Kinyarwanda

Sanskrit

Sindhi

Sangho

Serbo-Croatian

Sinhalese

Slovak

Slovenian

Samoan

Shona

ENTER

The language code boxes appear.

Use the remote controller’s Left/

Right [ ]/[ ] buttons to select the

code boxes.

Use the Up/Down [ ]/[ ] buttons to

Remote controller

ENTER

enter a language code.

See adjacent table for language codes.

When you’ve ﬁnished, press the

[ENTER] button.

Somali

Remote controller

Fiji

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swahili

Tamil

Telugu

Tajik

Thai

Faroese

Frisian

Irish

Scots-Gaelic

Galician

Guarani

Gujarati

Hausa

ENTER

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Kashmiri

Kurdish

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapük

Wolof

Xhosa

Yoruba

Zulu

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 45 Tuesday, February 10, 2004 10:12 AM

Troubleshooting

Symptom

Possible cause

Remedy

Connect the power cord to a suitable wall outlet

(page 20).

The power cord is not connected.

Can’t turn on the DV-

CP702?

Turn off the DV-CP702, wait ﬁve seconds, then try

turning it on again. If that fails, disconnect the

power cord from the wall outlet, wait ﬁve seconds,

reconnect it, then try turning it on again.

External interference is affecting the DV-

CP702’s digital circuitry.

The wrong input source is selected on your On your TV, select the input to which the DV-

TV.

CP702 is connected (page 17).

No picture?

No sound?

Check the video cable and correct as necessary

(page 17).

The video cable is not connected properly.

The wrong input source is selected on your On your hi-ﬁ amp or AV receiver, select the input

hi-ﬁ amp or AV receiver.

to which the DV-CP702 is connected (page 18).

Check the audio cable and correct as necessary

(page 18).

The audio cable is not connected properly.

The hi-ﬁ amp or AV receiver connected to

the DV-CP702’s audio outputs is not on.

Turn on the hi-ﬁ amp or AV receiver.

Check the Digital Out setting and correct as nec-

essary (page 41).

The Digital Out setting is incorrect.

The disc is dirty.

Remove the disc and clean it (page 9).

The picture distorts

occasionally?

You’re using the Fast Forward or Fast

Reverse function.

A little picture distortion may occur when using

these functions. This is normal.

The DV-CP702 is connected to your TV via

aVCR or other video equipment and its copy

protection system is affecting the picture.

Picture instability or

noise?

Connect the DV-CP702 directly to your TV

(page 17).

No discs loaded.

Load some discs (page 21).

The selected disc cannot be played because

it’s incompatible.

Load only compatible discs (page 7).

Load the disc the correct way up (page 21).

The disc is upside down.

The disc is not centered in the disc bay.

The disc is dirty.

Can’t start playback?

Place the disc in the center of the disc bay

(page 21).

Remove the disc and clean it (page 9).

The selected disc has parental lock and the

Parental Lock function is on.

Turn off the Parental Lock function (page 43).

The disc is not ISO9660 Level 2 format.

The disc has not been ﬁnalized.

Use only ISO9660 Level 2 format discs (page 8).

Finalize the disc (page 8).

Can’t play MP3/WMA/

JPEG discs?

MP3 ﬁles without a “.mp3” or “.MP3” ﬁle-

name extension are not recognized.

Can’t select MP3 ﬁles?

Use the correct ﬁlename extension (page 8).

WMA ﬁles without a “.wma” or “.WMA” or

“.ASF” ﬁlename extension are not recog-

nized.

Use the correct ﬁlename extension (page 8).

Don’t use the copyright option (page 8).

Can’t play WMA ﬁles?

The WMA ﬁle’s copyright option is on.

JPEG ﬁles without a “.jpg” or “.JPG” or

“.JPEG” ﬁlename extension are not recog- Use the correct ﬁlename extension (page 8).

nized.

Only Baseline JPEG ﬁles are supported.

Use Baseline JPEG ﬁles (page 8).

Progressive JPEG ﬁles are not.

Can’t view JPEG ﬁles?

Only JPEG ﬁles with the following bright-

ness/color difference ratios are supported:

4:4:4, 4:2:2, and 4:1:1.

Use JPEG ﬁles with the supported ratio (page 8).

Use JPEG ﬁles that are less than 5 megabytes

(page 8).

The JPEG ﬁle is too big.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 46 Tuesday, February 10, 2004 10:12 AM

Troubleshooting—Continued

Symptom

Possible cause

Remedy

The message “NO

PLAY” appears on the

display?

The disc is dirty.

Remove the disc and clean it (page 8).

Turn off the DV-CP702, wait ﬁve seconds, then

turn it on again. If that doesn’t resolve the issue,

disconnect the power cord from the wall outlet,

wait ﬁve seconds, reconnect it, then try again.

Buttons on the DV-

CP702 and remote con- anomalies, such as static electricity, can

troller don’t work?

Power supply voltage ﬂuctuations and other

interfere with normal operation.

There are no batteries in the remote

controller.

Install new batteries (page 15).

The batteries are ﬂat.

Replace with new batteries (page 15).

Check the batteries and correct as necessary

(page 15).

The batteries are installed incorrectly.

You’re not pointing the remote controller at Point the remote controller at the DV-CP702’s

Buttons on the DV-

CP702 work OK but

those on the remote con-

troller don’t?

the DV-CP702’s remote sensor.

remote sensor (page 15).

Use the remote controller closer to the DV-CP702

(page 15). The remote controller has a range of

approximately 16 ft. (5 meters).

You’re too far away from the DV-CP702.

Make sure that the DV-CP702 is not subjected to

direct sunshine or inverter-type ﬂuorescent lights.

Relocate if necessary.

A strong light source is interfering with the

DV-CP702’s remote sensor.

If the DV-CP702 is installed in a cabinet

with colored glass doors, the remote control- Open the doors, or use a cabinet without colored

ler may not work reliably when the doors are glass.

closed.

■ Abnormal Behavior

The DV-CP702 contains a microcomputer for signal processing and control functions. In very rare situations, severe interfer-

ence, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen,

unplug the power cord from the wall outlet, wait at least ﬁve seconds, and then plug it back in again. Alternatively, press and

hold the STOP [ ] button until “RESET” appears on the display (about 10 seconds).

■ Restoring the Default Settings

To reset the DV-CP702 to its factory defaults, turn it on and, while holding down the STOP [ ] button, press the [STANDBY/

ON] button. “INITIALIZE” appears on the display. When the reset is complete, “COMPLETE” is displayed, and the DV-

CP702 enters Standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 47 Tuesday, February 10, 2004 10:12 AM

Speciﬁcations

Standard NTSC (U.S. model), PAL/AUTO (Australian model)

1 (U.S. model), 4 (Australian model)

Video system

Region code

Laser

Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD)

4 Hz–22 kHz @ 48 kHz sampling rate

4 Hz–44 kHz @ 96 kHz sampling rate

DVD linear audio

Frequency response

4 Hz–20 kHz

CD audio

Signal-to-noise ratio (digital audio)

Audio dynamic range (digital audio)

Harmonic distortion (digital audio)

Wow and ﬂutter

100 dB

95 dB

0.006%

Below measurable level

5° to 35° C (41° F to 95° F)

Install horizontally

Temperature

Operating conditions

Installation

Y: 1.0 V (p–p), 75 Ω, negative sync, RCA/phono x3

PB/PR: 0.7 V (p–p), 75 Ω

COMPONENT VIDEO

Y: 1.0 V (p–p), 75 Ω, negative sync, 4-pin mini DIN x1

C: 0.286 V (p–p), 75 Ω

Video outputs

S VIDEO (S-Video)

1.0 V (p–p), 75 Ω, negative sync, RCA/phono x1

–22.5 dBm, optical connector x1

VIDEO (composite video)

OPTICAL

0.5 V (p–p), 75 Ω, RCA/phono x1

Audio outputs

General

COAXIAL

ANALOG

2.0 V rms, 440 Ω, RCA/phono x2

120 V AC, 60 Hz (U.S. model)

230–240 V AC, 50/60 Hz (Australian model)

Power supply

13 W

Power consumption

Power consumption in Standby

mode

0.95 W (U.S. model)

0.96 W (Australian model)

5.3 kg (11.7 lbs.)

Weight

435 X 91 X 432 mm (17-1/8 X 3-9/16 X 17)

Dimensions (W x H x D)

Speciﬁcations and features subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-CP702 DVD Changer Page 48 Tuesday, February 10, 2004 10:12 AM

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8023 Fax: 072-831-8124

ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com

ONKYO EUROPE ELECTRONICS GmbH

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net

ONKYO CHINA LIMITED

Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,

N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039

HOMEPAGE

http://www.onkyo.co.jp/

SN 29343662

I0402-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Dishwasher G 5100 User Manual
Milwaukee Saw CUTTING SAW User Manual
Mr Heater Water Heater MH9B User Manual
NEC All in One Printer 703 A0368 001 User Manual
Nesco Oven Electric Roaster Oven User Manual
Nextar Car Stereo System NC990C User Manual
Nextel comm Barcode Reader BRR L User Manual
NuTone Fan QT150 User Manual
Olympus Computer Drive MAUSB 1 User Manual
Panasonic DVD Player DVD F86 User Manual