MMP8565
User’s Guide
1GB MP3/WMA
Digital Audio Player
Before operating this product,
Download from Www.Somanuals.com. All Manuals Search And Download.
please read these instructions completely.
FCC DECLARATION
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) This device may not cause interference, and 2) This
device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shield cable must be used with this unit to ensure
compliance with class B FCC limits.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start
of your musical enjoyment. Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Decibel
Level
30
Example
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
50
60
70
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
We
WantYou
LISTENING
ForALifetime
EIA
EST. 1924
Download from Www.Somanuals.com. All Manuals Search And Download.
4
LOCATION OF CONTROLS
1
2
7
8
9
10
11
3
4
12
13
5
6
1. Headphone Jack
2. Display
3. Navigation π Button
4. Navigation √/Skip/Search o
Button
5. Navigation † Button
6. USB Jack
7. Reset Button (Inside the
Recess Hole)
8. Volume + Button
9. Volume - Button
10. MENU/Lock Button
11. Power On/Off/Stop Button
12. Enter/Play/Pause ®p Button
13. Navigation ®/Skip/Search n
Button
Download from Www.Somanuals.com. All Manuals Search And Download.
5
POWER SOURCE
RECHARGEABLE BATTERY OPERATION
This unit comes with a built-in Lithium Polymer rechargeable battery. It is recommended that
the battery be fully charged before using for the first time and when the battery indicator at
the top right of the display becomes empty. Below are the icons which will give the
rechargeable battery status:
FULL
50%
EMPTY
TO CHARGE THE BATTERY WITH THE COMPUTER
1. Connect the USB Cable to the USB port on the computer and the small end to the USB
port on the bottom of this unit. Press the Power On/Off/Stop button; the battery indicator
at the top right of the display will start filling with bars to indicate it is being charged.
2. When the battery is fully charged, the battery indicator will be full.
NOTE:
•
•
•
It takes approx. three hours to charge the battery from empty to full. When fully charged,
the unit can playback for approx. 20 hours.
When charging the battery with your computer, you can only use your computer to
transfer files to the player; the player’s other functions will be unavailable.
When the battery is empty, if you connect the unit to the computer, it will start charging
automatically. If it does not start charging, press the Power On/Off/Stop button to
charge up the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
INSTALL “DIGITAL AUDIO PLAYER” SOFTWARE
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE
For Windows ME, Windows2000 or Windows XP:
Windows will automatically detect the audio player without installing the CD software
when the USB cable is connected.
For Macintosh OSX:
Macintosh OSX will automatically detect the audio player without installing the CD
software. Do not install the software when using a Macintosh.
For Windows98SE:
The USB mass storage function will not be activated without driver installation. To
activate the USB mass storage function, please use the installation CD-Rom to install
the driver.
For Windows 98SE, if you are connecting your player to your computer for the first
time, please follow these instructions:
Procedure to Install Player Driver
1. Insert the Installation CD-Rom
into the CD Drive, then the
installation screen will appear. If
the installation screen doesn't
automatically appear, double-
click my computer then double-
click on the CD drive, then the
installation screen will appear.
Click on the Windows 98
firmware icon. Then click on the
MMP8565 icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
WINDOWS 98 DRIVER INSTALLATION
2. At the Welcome screen, click NEXT.
3. Read the License Agreement. If you accept
the terms of the license agreement, select
and dot the circle at the left of "I accept the
terms of the license agreement". Then click
NEXT.
4. At the Setup screen, click NEXT. It is
recommended to leave the destination folder
as it is.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
WINDOWS 98 DRIVER INSTALLATION (CONTINUED)
5. At the Program Folder screen, click NEXT. It
is recommended to leave the program folder
as it is.
6. Click "Install" to start the installation.
7. When finished, the InstallShield Wizard
Complete screen will appear. Click FINISH to
exit the Install program and complete the
Windows 98 Driver installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
WINDOWS MEDIA PLAYER 10 INSTALLATION
Windows Media Player 10 is for use with
Windows XP only. For Windows ME and
Windows 2000, please install Windows Media
Player 9. For Windows 98SE, please visit
www.Microsoft.com to download the
corresponding Windows Media Player for your
computer.
Once you have installed Windows Media Player
10, you can transfer MP3 files, WMA files, WMA
files with DRM 9 or DRM 10 to your player using
the “Sync” function.
1. Insert the Installation CD-Rom into the CD
Drive, then the installation screen will appear.
If the installation screen doesn’t automatically
appear, double-click “My Computer” then
double-click on the CD drive, then the
installation screen will appear. Click on the
Windows Media Player 10 Setup icon.
2. Installation will begin.
3. Read the License Agreement, then click I
ACCEPT.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
WINDOWS MEDIA PLAYER 10 INSTALLATION (CONT.)
4. Installation will continue.
5. At the Welcome screen, click NEXT.
6. Select the desired privacy options.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
WINDOWS MEDIA PLAYER 10 INSTALLATION (CONT.)
7. Click on Privacy Statement to view the
Statement, if desired. When finished, click
Next.
8. Read the instructions and tick the check
boxes as desired. Then click on More
Options and tick the check boxes as desired.
9. Click “Finish” to finish the installation of the
Windows Media Player 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
DOWNLOADING AND TRANSFERRING FILES
TRANSFERRING FILES
You can download digital music files from the Internet or use encoding software to convert
music that you have on an audio CD into MP3 or WMA format. Once these files are stored
on your computer you can easily copy them to your player.
For Windows XP, if you already installed Windows Media
Player 10, you can transfer music files (MP3, WMA, WMA files
with DRM 9 or DRM 10) to the player through the "Sync" function
of Windows Media Player 10. Connect your computer to the USB
port on your computer using the USB cable. "MPT Player" or
"MMP8565" will appear in your "My Computer" folder which
indicates the player is connected. Also, the player will display the above figure. Then, follow
the procedure on page 16 to transfer music files to the player.
For Windows ME, Windows 2000, Windows 98 or Windows XP (without Windows
Media Player 10), transfer music files as follows:
1. Connect your player to the USB port on your computer using the USB cable as shown
on page 6.
2. A "Removable Disk" window will automatically pop-up on your computer screen.
3. To add more files and songs to your player, simply drag and drop MP3 or WMA files
from anywhere on your computer into the "Removable Disk" window.
IMPORTANT: A WMA file with DRM 9 or DRM 10 will not play back if you directly drag and
drop it into the "Removable Disk" window. You must use Windows Media Player 10 to
transfer copy-protected files as described on page 16.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
DOWNLOADING AND TRANSFERRING FILES (CONT.)
TRANSFERRING AUDIO FILES TO YOUR DIGITAL AUDIO PLAYER USING A
MACINTOSH COMPUTER
Make sure to use a Macintosh computer with an operating system of 10.0 or layer to
transfer audio files.
1. Turn on your computer.
2. Turn on your digital audio player.
3. Connect the smaller end of the cable to the USB jack on the player and the larger
end of the cable to the USB port on your Macintosh.
4. Your computer will automatically recognize your player and mount a hard disk icon
onto your desktop.
5. Locate the folder where your audio files are stored on your computer’s hard drive.
Simply drag and drop the audio files onto the mounted hard disk drive icon of your
digital audio player located on your desktop.
6. After you have finished your transfer, put away the digital audio player hard disk
icon(s) by dragging it to the Trash icon or Control-click its icon and choose Eject from
the File menu or select Eject from the File drop-down menu located at the top of your
screen. You can also use the keyboard shortcuts by selecting the digital audio player
hard disk icon and pressing the Command-E keys.
7. Your player is ready to play the files you transferred.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
DOWNLOADING AND TRANSFERRING FILES (CONT.)
For Windows XP, you can also utilize the previously
installed Windows Media Player 10 software to
convert music on an audio CD into MP3 or WMA
format as follows:
1. Open the Windows Media Player 10 Browser,
then click on the “Rip” icon on the top tool bar.
Insert a Music CD into the CD-Rom drive of your
computer.
NOTE: For Windows 98SE, Windows ME and
Windows 2000, please use the Windows Media
Player 9 to convert music on an audio CD into MP3 or
WMA format.
2. Click on the “Tools” menu option at the top menu bar,
then click on “Options”; the Option setting menu will
appear. Click on Rip Music and set the Rip Music to the
desired location on your computer. Then, set the desired
format for the newly ripped music (MP3 format or
Windows Media Audio format). Adjust the audio quality as
desired. When finished, click “OK” to confirm the settings.
3. Click on the “Rip Music” icon to start ripping the music to
your computer.
4. When the music tracks are ripped; connect the player to
your computer. Open the “MPT Player” or “MMP8565”
window and open the ripped music location window.
5. To add the transferred/ripped music files/songs to your player simply drag and drop the MP3
and/or WMA files into the “MPT Player” or “MMP8565” window.
6. When the files are finished loading into the player, follow the “Safely Remove
Hardware” procedure as shown on page 17.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
DOWNLOADING AND TRANSFERRING FILES (CONT.)
TRANSFERRING MP3/WMA FILES AND WMA
FILES WITH DRM 9 OR DRM 10 USING THE
WINDOWS MEDIA PLAYER 10 (FOR WINDOWS
XP ONLY)
To transfer MP3 files/WMA files/WMA files with DRM
9 or 10 to the player, follow the procedure described
below using the previously installed Windows Media
Player 10. Before beginning the procedure please
turn the unit on and connect the unit to the computer
as previously described.
1. Open the “Windows Media Player Browser 10”
and click on “Sync”.
2. Click on the “Sync List” pull-down menu to
locate the music files you wish to download.
Then make sure to tick the box next to the files.
3. Select the Portable Device (MPT player or
MMP8565) that you want to copy to from the
right side drop-down menu. Click “Start Sync” to
start transferring music files to the player.
4. After finished transferring all the desired files to
your unit, follow the “Safely Remove Hardware”
procedure on the next page.
NOTES:
•
For WMA files with DRM 10, you can only use
Windows Media Player 10 to transfer files to
your player.
•
For Windows ME and Windows 2000, please
use Windows Media Player 9 to transfer WMA
files with DRM 9 to the player. For Windows
download the corresponding Windows Media
Player to transfer music files to the player.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
SAFELY REMOVE HARDWARE
SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER
NOTE: To avoid damage to your player or data loss, always follow the procedure listed below
before disconnecting your player from the USB port on your computer.
Using your mouse, double click the "Safely Remove
Hardware" icon on the task bar.
From the "Safely Remove Hardware" window, select "USB
Mass Storage Device" and click the "Stop" button. The
"Stop a Hardware Device" window will pop-up as shown:
Click "OK". When the "Safe to Remove Hardware" window is displayed, you may remove the
player from the USB cable or remove the USB cable from the computer.
NOTES:
• If the “Safely Remove Hardware” icon is not displayed on the task bar, please double click
on My Computer. Right click on “Removable Disk” and left click on “Eject”. Then it is safe to
remove the player from the computer.
• The “Safely Remove Hardware” procedure is not necessary for Win98 and Win98SE users.
• If you are using Windows XP and the Windows Media Player 10 software is already installed,
then you do not need to follow the above “Safely Remove Hardware” procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
OPERATION
TURNING THE POWER ON/OFF
LOCK SWITCH
1
1
Turn the unit on by pressing the Power On/Off/ With the unit on, press and hold the MENU/Lock
Stop button; the Memorex start screen will button until LOCKED appears in the display; no
appear in the display temporarily. Then the buttons will function. This is useful when you do
Music Player menu will appear and the not want the track changed by accidentally
MP3/WMA track’s information will appear in pressing
a
button. Press and hold the
the display. To turn the unit off, press and hold MENU/Lock button until UNLOCKED appears in
the Power On/Off/Stop button; “Hold Down To the display to cancel the Lock function.
Power Off” will appear in the display. The unit
will turn off after it counts up from one to three.
Do not release the Power On/Off/Stop button
until the unit turns off.
NOTE: After you have transferred music files to the player, when you turn on the player, the
“Memorex” start screen will appear in the display temporarily followed by “Internal Updating
Music Library”. It will take several seconds to several minutes to update the player’s library
depending on the number of songs that you transferred to the player. When done, the Music
Player menu will appear in the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
OPERATION (CONTINUED)
TO LISTEN TO MP3s/WMAs/WAVs
1
1
2
1
2
2
Turn the unit on by pressing the Power On/Off/Stop
button ; the Memorex start screen will appear in the
display temporarily. Then the Music Player menu will
appear and the MP3/WMA’s track information will
appear in the display. Press the Enter/Play/Pause
®p button 2 to start playback; the MP3 information
will appear/scroll across the display.
Press the VOLUME +/- buttons 1 to increase or
decrease the volume. To stop playback, press
the Power On/Off/Stop button 2; the Stop
indicator will appear.
3
To turn the unit off, press and hold the Power On/Off/Stop
button; “Hold Down To Power Off” will appear in the
display. The unit will turn off after it counts up from one
to three. Do not release the Power On/Off/Stop button
until the unit turns off.
NOTE:
•
See pages 7-16 for information on uploading MP3,
WMA and WAV files to this unit.
NOTE (AUTO RESUME): Each time you exit the Music Player mode or turn the unit off, when
the unit is turned back on or you enter the Music Player mode again, this unit will resume at the
beginning of the last track which was playing before turning the power off or changing mode. To
cancel resume, press the Power On/Off/Stop button once while in Music Player Stop mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
OPERATION (CONTINUED)
TO PAUSE PLAYBACK
2
1
During playback, if you wish to pause the file
momentarily, press the Enter/Play/Pause ®p
button; playback will pause, the Pause indicator will
appear and the timer will stop counting.
Press the Enter/Play/Pause ®p button again to
resume playback; the sound will return, the Play
indicator will appear and the timer will start counting
again.
TO SELECT/BROWSE THROUGH THE FILES
1
1
2
1
2
2
3
For the Browse option, see more details below:
Artist: All Artists will be shown in the display. Select the
desired Artist using the Navigation L 1 or M 2 button, then
press the Enter/Play/Pause ®p button 3. All the Artist’s
albums will appear; select the desired album using the
Press the MENU/Lock button 1; the Main menu will
appear. Scroll to Browse using the Navigation L 2 or
M 3 button then press the Enter/Play/Pause ®p
button 4 to select it. Select the desired Browse
option (for example, Genre) using the Navigation L
Navigation
L
1 or
M
2
button, then press the
Enter/Play/Pause ®p button 3. Then, select the desired
song using the Navigation L 1 or M 2 button, then press
the Enter/Play/Pause ®p button 3 to start playback.
Album: All the albums will appear. Select the desired
album using the Navigation L 1 or M 2 button, then press
the Enter/Play/Pause ®p button 3. Then, select the
desired song using the Navigation L 1 or M 2 button, then
press the Enter/Play/Pause ®p button 3 to start playback.
All Songs: The song’s name will appear in the display.
Select the desired song using the Navigation L 1 or M 2
2 or M 3 button, then press the Enter/Play/Pause
®p button 4. A list will appear separating the files
into the selected search criteria. At the next screen,
select the next desired option (for example, POP)
using the Navigation L 2 or M 3 button, then press
the Enter/Play/Pause ®p button 4. At the next
screen, scroll through and select a file using the
Navigation L 2 or M 3 button, then press the
Enter/Play/Pause ®p button 4 to select the music
file and start playback of the file.
button, then press the Enter/Play/Pause ®p button 3 to
start playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
OPERATION (CONTINUED)
FORWARD/REVERSE SKIP
1
2
During playback, press the Navigation During playback, press the Navigation
®/Skip/Search n button to advance the player √/Skip/Search o button to move the player
to the beginning of the next file. Press the back to the beginning of the currently playing file.
Navigation ®/Skip/Search n button repeatedly Press the Navigation √/Skip/Search o button
repeatedly to move the player back to lower-
numbered files.
to advance the player to higher-numbered files.
HIGH-SPEED MUSIC SEARCH
During playback, press and hold the
Navigation/Skip/Search √ / o 1 or ® / n 2
button to move the player forward or backward
within a file to locate a specific musical passage.
The player will move forward or backward at
high speed as long as the button is held. When
you release the button, normal playback will
resume.
1
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
21
OPERATION (CONTINUED)
SETTING THE EQUALIZER
2
1
1
1
2
2
3
Press the MENU/Lock button 1; the Main Scroll to Equalizer using the Navigation L 1 or
menu will appear. Scroll to Settings using the
Navigation L 2 or M 3 button then press the
Enter/Play/Pause ®p button 4 to select it.
M 2 button then press the Enter/Play/Pause ®p
button 3 to select it.
4
3
1
2
Select a desired EQ setting (Normal, Rock,
Jazz, Classical, Pop or X-Bass using the
Navigation L 1 or M 2 button then press the
Press the Navigation √/Skip/Search o button
twice to exit the menus. The selected EQ mode
will appear at the top of the display.
NOTE: You can also press the MENU/Lock
button twice to exit and return to the Music
Player menu . Also, if no button has been
pressed for 25 seconds, the unit will
automatically return to the Music Player menu.
Enter/Play/Pause ®p button 3 to select it.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
OPERATION (CONTINUED)
SETTING THE PLAY MODE
2
1
1
1
2
2
3
Press the MENU/Lock button 1; the Main Scroll to Play Mode using the Navigation L 1 or
menu will appear. Scroll to Settings using the
Navigation L 2 or M 3 button then press the
Enter/Play/Pause ®p button 4 to select it.
M 2 button then press the Enter/Play/Pause ®p
button 3 to select it.
4
3
1
2
Select the desired Play mode using the
Navigation L 1 or M 2 button, then press the
Enter/Play/Pause ®p button 3 to select it.
Press the Navigation √/Skip/Search o button
twice to exit the menus. The selected Play mode
symbol will appear at the top of the display.
Normal:
Normal playback
Repeat Track: Repeats the current track
Repeat All:
Shuffle:
Repeats all of the files
Randomly plays the files once
and then stops
Shuffle Repeat: Randomly plays all the files
repeatedly
Download from Www.Somanuals.com. All Manuals Search And Download.
23
OPERATION (CONTINUED)
SETTING THE CONTRAST
2
1
1
1
2
2
3
Press the MENU/Lock button 1; the Main Scroll to Contrast using the Navigation L 1 or M
menu will appear. Scroll to Settings using the
Navigation L 2 or M 3 button then press the
Enter/Play/Pause ®p button 4 to select it.
2 button then press the Enter/Play/Pause ®p
button 3 to select it.
4
3
2
1
Press the Navigation ® 1 to increase or Press the Navigation √/Skip/Search o button
Navigation √ 2 button to decrease the
contrast, then press the Enter/Play/Pause ®p
button 3.
twice to exit the menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
OPERATION (CONTINUED)
SETTING THE BACKLIGHT
2
1
1
1
2
2
3
Press the MENU/Lock button 1; the Main Scroll to Backlight using the Navigation L 1 or
menu will appear. Scroll to Settings using the
Navigation L 2 or M 3 button then press the
Enter/Play/Pause ®p button 4 to select it.
M 2 button then press the Enter/Play/Pause ®p
button 3 to select it.
4
3
1
2
Press the Navigation L 1 or M 2 button to Press the Navigation √/Skip/Search o button
select the desired backlight time (time the twice to exit the menus.
backlight will stay on after
a
button is
pressed–Off, 3 seconds, 5 seconds, 10 seconds
or Always On), then press the Enter/Play/Pause
®p button 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
OPERATION (CONTINUED)
SETTING THE POWER SAVINGS
2
1
1
1
2
2
3
Scroll to Power Savings using the Navigation L
1 or M 2 button then press the Enter/Play/
Pause ®p button 3 to select it.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings using the
Navigation L 2 or M 3 button then press the
Enter/Play/Pause ®p button 4 to select it.
4
3
1
2
Press the Navigation L 1 or M 2 button to Press the Navigation √/Skip/Search o button
select the desired Power Savings (time the unit twice to exit the menus.
will stay on before turning off due to inactivity
–Disable, 1 Minute, 3 Minutes or 5 Minutes),
then press the Enter/Play/Pause ®p button 3.
NOTE: Select Disable to disable this feature
and not have the unit enter the Power Savings
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
OPERATION (CONTINUED)
SETTING THE LANGUAGE
2
1
1
1
2
2
3
Press the MENU/Lock button 1; the Main Scroll to Language using the Navigation L 1 or
menu will appear. Scroll to Settings using the
Navigation L 2 or M 3 button then press the
Enter/Play/Pause ®p button 4 to select it.
M 2 button then press the Enter/Play/Pause ®p
button 3 to select it.
4
3
1
2
Press the Navigation L 1 or M 2 button to Press the Navigation √/Skip/Search o button
select the desired Language the text on the twice to exit the menus.
display will be in (English, Traditional Chinese,
Spanish, Italian, French, Dutch or Japanese),
then press the Enter/Play/Pause ®p button 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
OPERATION (CONTINUED)
TO VIEW THE SYSTEM INFO (ABOUT)
2
1
1
1
2
2
3
Press the MENU/Lock button 1; the Main Scroll to About using the Navigation L 1 or M 2
menu will appear. Scroll to Settings using the
Navigation L 2 or M 3 button then press the
Enter/Play/Pause ®p button 4 to select it.
button then press the Enter/Play/Pause ®p
button 3 to select it. The unit will then display the
Version, Internal media (the total internal
memory) and Internal Free Space.
3
Press the Navigation √/Skip/Search o button
three times to exit the menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for service.
SYMPTOM
CAUSE
SOLUTION
Unit will not
Battery is low/empty.
Recharge battery as
described on page 6.
Press Power On/Off/Stop
button to turn the unit on.
Insert headphones.
turn on.
Unit is not turned
on.
Headphones are not
inserted.
No sound.
Volume is set too
low.
Raise the volume using the
Volume + button.
The MP3 or WMA files Download uncorrupted
are corrupted.
No files are in the
player.
files.
Upload files to the unit as
described on pages 13-16.
The computer is not
recognizing the
player.
The player is
Make sure player is
not securely connected. securely connected.
Win98 Driver isn’t installed Install Win98 driver and/or see
or computer is not
compatible.
pages 7-12 for
compatibility.
See page 16 to download
WMA files with DRM.
WMA files with DRM
can’t playback.
Incorrect downloading
methods.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
TROUBLESHOOTING GUIDE (CONTINUED)
SYMPTOM
No buttons work.
CAUSE
The Lock feature is
activated.
SOLUTION
Deactivate Lock feature as
described on page 18.
Unit needs to be reset Reset unit and/or
or firmware needs to be update firmware, see
updated.
pages 31-32.
Unit acting erratically. Unit needs to be reset Reset unit and/or
or firmware needs to be update firmware, see
updated.
pages 31-32.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
FORMATTING THE PLAYER
Formatting the Player
WARNING! Do not format this player unless it stops working and you are
instructed to do so by technical support personnel.
1. Use the USB cable to connect the
player and the computer.
2. Double click on My Computer, then
right click "MPT Player", "MMP8565"
or "Removable Disk" and left click on
"Format".
3a. For "MPT Player" or "MMP8565", at
the "Format" window, click OK to
confirm and the player will start to
format (see figure to the right). When
finished, click "OK" to close the
Format window.
3b. For "Removable Disk", at the "Format" window, select "FAT 32" from the
file system pull-down menu, then click "Start" to format the unit (see
figure above).
NOTE: Make sure you have selected "FAT 32" at the file system pull-
down menu; otherwise, after formatting, the player will not work properly.
Then, click OK to confirm and the player will start to format. When
finished, click "Close" to close the Format window.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
UPDATING THE FIRMWARE
WARNING! Do not update the firmware unless you are experiencing problems with
your digital audio device. Incorrect or faulty firmware installation will cause the player
to stop functioning.
2. Unzip the file, then double click setup.exe in the Desktop folder to install the
software to your computer.
3. Connect the player to the computer using the supplied USB cable and the
installation screen will appear. (If the installation screen does not appear, unplug
the USB cable and turn off the unit). Connect to the computer again and press and
hold the Power On/Off/Stop button until the installation screen appears.
4. Follow the on-screen instructions to install the driver.
5. When finished, click START and locate the newly installed software “Deco” and
select “Firmware Download”.
RESETTING THE UNIT
If the unit acts erratically, reset the unit by inserting a thin object (such as a paper clip)
into the recessed RESET button. For the RESET button, see page 5 for the button's
location.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
SPECIFICATIONS
Audio
Frequency Range
Headphones Output
S/N Ratio
20Hz – 20KHz
5mW, 32ohm (Max. Vol)
85db (MP3)
File Support
MP3
MPEG 1/2/2.5 Layer 3
WMA
Windows Media Audio (WMA file with
DRM9 or DRM 10)
Bit Rate
32kbps–320kbps (MP3)
32kbps–192kbps (WMA)
General
Dimension
Weight
1.8 (W) x 3.2 (H) x 0.6 (D) inches
1.7 ounces
USB
USB 2.0
Built-in Memory
Max. Playtime
Supported OS
1GB
Approx. 20 hours
Win ME, 2000, XP and Mac OSX
Win 98SE (Driver is required)
23° F to 104° F (-5° C to 40° C)
Li-Polymer Rechargeable Battery
DC 3.7V, 530mAh
Operating Temperature
Rechargeable Battery
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,
PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR TO MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL
AT 1-800-321-6993.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Memcorp, Inc.
Weston, FL
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|