Owner’s Guide
20-inch
Manual Clean
Gas Range
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . 2-4
S Cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
S Grates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
S Surface burners . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
S Oven door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
S Oven bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
S Broiler drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
S Oven rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
S Leveling legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ABOUT YOUR COOKTOP . . . . . . . . . . . . . . . . . . . . . 5-6
S Ignition system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
S Surface burners . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
S Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ABOUT YOUR OVEN . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
S Aluminum foil usage . . . . . . . . . . . . . . . . . . . . . . . . . 7
S Preheating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
S Oven control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
S Cooking tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ABOUT SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
S Troubleshooting chart . . . . . . . . . . . . . . . . . . . 14-15
S How to remove range for cleaning and
servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CLEANING CHART . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
S Electrical connection . . . . . . . . . . . . . . . . . . . . . . . 15
ABOUT YOUR RANGE . . . . . . . . . . . . . . . . . . . . . . 11-13
S Ignition system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
INSTALLER Please leave
Model Number:
this manual with this appliance.
Serial Number:
CONSUMER Please read
Date of Purchase:
and keep this manual for future
Model and serial numbers are on the rating plate, which is located on the
sides of the lower range front frame. Use these numbers when requesting
service.
reference. Keep sales receipt
and/or cancelled check as proof
of purchase.
FOR CUSTOMER ASSISTANCE CALL 1-800-688-9900 USA
1-800-688-2002 Canada
8113P644-60
A/08/06
Download from Www.Somanuals.com. All Manuals Search And Download.
3
IMPORTANT SAFETY INSTRUCTIONS
Do not touch a hot oven light bulb with a damp cloth as the
bulb could break. Should the bulb break, disconnect power
to the appliance before removing bulb to avoid electrical
shock.
CHILD SAFETY
Do not leave children alone or unsupervised near the
appliance when it is in use or is still hot. Children should
never be allowed to sit or stand on any part of the
appliance.
CHILD SAFETY
Children must be taught that the appliance and utensils
in it can be hot. Let hot utensils
cool in a safe place, out of reach
of small children. Children should
be taught that an appliance is not
a toy. Children should not be
Always place a pan on a surface burner before turning it
on. Be sure you know which knob controls which surface
burner. Make sure the correct burner is turned on and that
the burner has ignited. When cooking is completed, turn
burner off before removing pan to prevent exposure to
burner flame.
allowed to play with controls or
other parts of the unit.
Always adjust surface burner flame so that it does not
extend beyond the bottom edge of the pan. An excessive
flame is hazardous, wastes energy and may damage the
appliance, pan or cabinets above the appliance.
CAUTION: Do not store items of
interest to children in cabinets
above an appliance or on the
backguard of a range. Children
climbing on the appliance or on the
appliance door to reach items could
be seriously injured.
Never leave a surface
cooking operation
unattended especially
when using a high heat
setting or when deep fat
frying. Boilovers cause
smoking and greasy
ABOUT YOUR APPLIANCE
spillovers may ignite.
Clean up greasy spills
as soon as possible. Do not use high heat for extended
cooking operations.
WARNING
NEVER use appliance door as a step stool or seat as this
may result in possible tipping of the appliance and serious
injuries.
Never heat an unopened container on the surface burner
or in the oven. Pressure build-up may cause container to
burst resulting in serious personal injury or damage to the
appliance.
NEVER use this appliance as a space heater to heat or
warm a room. Doing so may result in carbon monoxide
poisoning and overheating of the oven.
Use dry, sturdy pot holders. Damp pot holders may cause
burns from steam. Dish towels or other substitutes should
never be used as pot holders because they can trail
across hot surface burners and ignite or get caught on
appliance parts.
NEVER cover any slots, holes or passages in the oven
bottom or cover the entire rack with materials such as
aluminum foil. Doing so blocks air flow through the oven
and may cause carbon monoxide poisoning. Aluminum
foil may also trap heat causing a fire hazard.
Always let quantities of hot fat used for deep fat frying cool
before attempting to move or handle.
NEVER obstruct the flow of combustion and ventilation air
by blocking the oven vent or air intakes. Doing so restricts
air to the burners and may result in carbon monoxide
poisoning.
Do not let cooking grease or other flammable materials
accumulate in or near the appliance, hood or vent fan.
Clean hood frequently to prevent grease from
accumulating on hood or filter. When flaming foods under
the hood, turn the fan on.
Do not use the cooktop or oven as a storage area for food
or cooking utensils.
Avoid touching oven vent area while oven is on and for
several minutes after oven is turned off. Some parts of the
vent and surrounding area become hot enough to cause
burns. After oven is turned off, do not touch the oven vent
or surrounding areas until they have had sufficient time to
cool.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
IMPORTANT SAFETY INSTRUCTIONS
Use caution when wearing garments made of flammable
material to avoid clothing
fires. Loose fitting or long
hanging-sleeved apparel
should not be worn while
cooking. Clothing may
Only certain types of glass, glass/ceramic, ceramic, or
ignite or catch utensil
handles.
Always place oven racks in the desired positions while
oven is cool. Slide oven rack out to add or remove food,
using dry sturdy pot holders. Always avoid reaching into
the oven to add or remove food. If a rack must be moved
while hot, use a dry pot holder. Always turn the oven off at
the end of cooking.
Use care when opening the oven door. Let hot air or steam
escape before removing or replacing food.
PREPARED FOOD WARNING: Follow food
manufacturer’s instructions. If a plastic frozen food
container and/or its cover distorts, warps, or is otherwise
damaged during cooking, immediately discard the food
and its container. The food could be contaminated.
UTENSIL SAFETY
Use pans with flat bottoms and handles that are easily
grasped and stay cool. Avoid using unstable, warped,
easily tipped or loose handled pans. Pans that are heavy
to move when filled with food may also be hazardous.
To minimize burns, ignition of flammable materials and
spillage due to unintentional contact with the utensil, do
not extend handles
over adjacent surface
burners. Always turn
pan handles toward
the side or back of the
appliance, not out into
the room where they
are easily hit or
reached by small
children.
Never let a pan boil dry as this could damage the utensil
and the appliance.
Follow the manufacturer’s directions when using oven
cooking bags.
5
ABOUT YOUR COOKTOP
IGNITION SYSTEM
HOW TO LIGHT SURFACE BURNERS
CAUTION: If the flame should go out during a cooking
operation, turn the burner off. If gas has accumulated and
a strong gas odor is detected, open a window and wait 5
minutes for the gas odor to disappear before relighting
burner.
Your cooktop will feature either pilot ignition or pilotless
ignition. If the gas supply to the range is turned off, be
sure all controls are set in the OFF position before
re-supplying gas to the appliance.
To prevent damage to the cooktop or pan, never operate
surface burner without a pan in place, never allow a pan
to boil dry and never operate a surface burner on HIGH
for extended periods of time.
Pilot Ignition
When the range is first installed, the pilots may be difficult
to light due to air in the gas line. To bleed off air from the
line, hold a lighted match next to the burner and turn knob
on. When the burner lights, turn the knob off and proceed
as directed below.
To light surface burner:
1. Place a pan on the burner grate.
To light pilot: Raise cooktop and hold a lighted match
near the pilot ports. There are two pilot ports.
NOTE: The burner flame may lift off the burner head
and a “roaring” sound may be heard if a pan is not
placed on the grate before lighting the burner.
2. Push in and turn knob to the LITE position.
Pilotless ignition models only: A clicking sound will
be heard and the burner will light. When one burner is
turned on, all ignitors will spark.
Pilotless Ignition
INTERNATIONAL
SYMBOLS
RIGHT REAR
Pilotless ignition uses a spark from the ignitor to light the
burner. There are two ignitors for conventional surface
burners. Once the burner lights, turn the knob to the
desired setting. The clicking sound will not stop until the
knob is turned from the LITE position. Once the burner
lights, turn the knob to the desired setting. The clicking
sound will not stop until the knob is turned from the LITE
position.
3. After the burner lights, turn the knob to the desired
flame size.
Pilotless ignition models only: The ignitors will
continue to spark until the knob is turned from the LITE
position.
In the event of a power failure, the surface burner can
be manually lighted. Be sure all controls are in the OFF
position. Hold a lighted match to the desired surface
burner head. Push in and turn knob to the LITE position.
The burner will then light. Adjust the flame to the desired
flame size.
Adjust the flame size so it
does not extend beyond
the edge of the cooking
utensil. This is for
personal safety and to
prevent possible damage
to the appliance, pan, or
cabinets above the
appliance. This also improves cooking efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ABOUT YOUR COOKTOP
SELECTING FLAME SIZE
COOKWARE CONSIDERATIONS
Use a HIGH flame setting to quickly bring liquids to a boil
or to begin a cooking or canning operation. Then reduce
to a lower setting to continue cooking. Never leave food
unattended when using a HIGH flame setting.
Cookware, including canning equipment, which extends
more than two inches beyond the grate, rests on two
grates, or touches the cooktop will cause a build up of
heat and may result in damage to the the burner grate,
burner and cooktop.
Cookware, such as a wok with a support ring, which
restricts air circulation around the burner will cause heat
to build up and may result in damage to the burner grate,
burner or cooktop.
Foods cook faster when the cookware is covered because
more heat is retained. Lower the flame size when
cookware is covered. This also improves cooking
efficiency.
An intermediate flame size is used to continue a cooking
operation. Food will not cook any faster when a higher
flame setting is used than needed to maintain a gentle
boil. Remember, water boils at the same temperature
whether boiling gently or vigorously.
The cooking performance is greatly affected by the type of
cookware used. Proper cookware will reduce cooking
times, use less energy and produce more even cooking
results. For best results use a heavy gauge metal pan
with a smooth flat bottom, straight sides and a tight fitting
lid. Select a material, such as aluminum or copper, that
conducts heat quickly and evenly.
Use LO to simmer or keep foods at serving temperatures.
CANNING
When canning, use the HI setting just until the water
comes to a boil or pressure is reached in a pressure
canner, then reduce to a setting that maintains the
pressure or a boil.
If a knob is turned very quickly from the HI to the LO
setting, the flame may go out, particularly if the burner is
cold. If this occurs, turn the knob to the OFF position. Wait
several seconds, then light the burner again.
Prolonged use of the HI setting, the use of incorrect
canning utensils, or the use of improper canning
techniques may produce excessive heat and result in
permanent damage to the appliance.
ABOUT THE SURFACE BURNER FLAME
NOTE: For additional canning information contact your
local County Extension Office. Or, contact Alltrista
Consumer Products Company, marketer of Ball brand
home canning products at 800-240-3340 or write: Alltrista
Corp., Consumer Affairs Dept., P.O. Box 2729, Muncie, IN
47307-0729.
A properly adjusted burner with clean ports will light within
a few seconds. You may hear a “popping” sound on
some types of gas when the surface burner is turned
off. This is a normal operating sound of the burner.
On natural gas, the flame will be blue with a deeper blue
core; there should be no trace of yellow in the flame. A
yellow flame indicates an improper mixture of air/gas.
Have a serviceman adjust the mixture if a yellow flame
occurs. (NOTE: Adjustments are not covered by the
warranty.)
On LP gas, some yellow tipping may occur. This is normal
and adjustment is not necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
ABOUT YOUR OVEN
ALUMINUM FOIL USAGE
HOW TO SET OVEN TO BAKE
S Do not cover an entire oven rack or oven bottom with
aluminum foil. This will reduce heat circulation, result
in poor baking and may damage the oven bottom.
1.When cool, position rack
in oven.
2.Push in and turn OVEN TEMP
knob to desired temperature.
3.Place food in center of
oven, allowing a minimum
of 2 inches between utensil
and oven walls.
S Do not cover the broiler insert with aluminum foil. This
prevents fat from draining into the pan below and in-
creases flare-ups and smoke. However, the broiler
pan may be lined with foil for easier clean-up.
4.Check food for doneness at
minimum time in recipe. Cook
longer if necessary.
5.Remove food from the oven and turn the OVEN
TEMP knob to OFF.
PREHEATING
S Preheating is necessary for baking.
S It is not necessary to preheat for roasting.
S To preheat, set the oven to the desired temperature
and allow about 8 to 15 minutes for the oven to
preheat.
HOW TO SET OVEN TO BROIL
1. Place broil rack and broiler
pan in the recommended
rack position.
2. Push in and turn OVEN
TEMP knob to BROIL.
3. It is possible to broil longer
cooking foods such as chicke
pieces at a lower temperature
to prevent overbrowning. Turn
S When the oven reaches the preset temperature, the
oven indicator light will turn off.
S Selecting a temperature higher than desired will NOT
preheat the oven any faster, and may have a negative
effect on baking results.
OVEN CONTROL
the knob to 400 or 450°F, rath
than BROIL, for low temperature
broiling.
The OVEN TEMP knob is used
to select the oven temperature.
4. Turn meat once about halfway thorugh cooking.
Always turn this knob just TO
the desired temperature.
5.Remove food from oven and turn the OVEN TEMP
knob to OFF. After cleaning broiler pan, store it in the
lower broil compartment.
To accurately set the oven
temperature, do not turn to a
higher temperature and then
BROILING CHART
back.
OVEN TEMP
TYPE OF
MEAT
RACK
POSITION
TOTAL TIME
(MINUTES)
BACON
bottom
BROIL at 400°F
7 to 10 minutes (well)
BEEF STEAK
1-inch thick
middle
middle
BROIL
15 to 20 minutes (med)
BROIL
20 to 25 minutes (well)
CHICKEN
Pieces
bottom
middle
BROIL at 450°F
30 to 45 minutes (well)
FISH
BROIL
8 to 15 minutes (flaky)
HAMBURGERS
3/4-inch thick
middle
BROIL
14 to 18 minutes (well)
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ABOUT YOUR OVEN
BAKING TIPS
ROASTING TIPS
BROILING TIPS
Broiling is used for tender cuts of
meat or marinated meats, poultry,
fish and some fruits and vegetables.
The food is placed directly under the
burner.
Use a reliable recipe and accurately
measure fresh ingredients. Carefully
follow directions for oven
temperature and cooking time.
Preheat oven if recommended.
Roasting is the method for cooking
large, tender cuts of meat
uncovered, without adding moisture.
Most meats are roasted at 325°F. It
is not necessary to preheat the oven.
Cooking time is determined by the
desired degree of doneness and the
distance between the food and the
burner.
Use the correct rack position.
Baking results may be affected if the
wrong rack position is used.
Place the meat fat-side-up on a rack
in a shallow roasting pan. Placing the
meat on a rack holds it out of the
drippings, thus allowing better heat
circulation for even cooking. As the
fat on top of the roast melts, the
meat is basted naturally, eliminating
the need for additional basting.
S Top browning may be darker if
food is located toward the top of
the oven.
For best results, steaks and chops
should be at least 3/4-inch thick.
Trim excess fat to prevent excessive
spattering or smoking. Cut slashes in
the outer edges of the fat to prevent
curling during cooking.
S Bottom browning may be darker if
food is located toward the bottom
of the oven.
The cooking time is determined by
the weight of the meat and the
desired doneness.
Bakeware material plays an
Use a broiler pan with an insert
designed to drain excess liquid and
fat away from the cooking surface.
This is to prevent spatters and
smoke.
important part in baking results.
Always use the type and size of pan
called for in the recipe. Cooking
times or cooking results may be
affected if the wrong size is used.
For more accurate results, use a
meat thermometer. Insert it so the tip
is in the center of the thickest part of
the meat. It should not touch fat or
bone.
S Shiny metal pan reflects heat
away from the food, produces
lighter browning and a softer crust.
Use shiny pans for baking cakes
or cookies.
For a brown exterior and rare interior,
meat should be close to the burner.
For well-done meat, place the broiler
pan farther from the burner.
Remove the roast from the oven
when the thermometer registers the
desired doneness.
Increasing the distance between the
meat and the burner will help reduce
spattering and smoking.
S Dark metal pan or a pan with an
anodized (dull) bottom absorbs
heat, produces darker browning
and a crisper crust. Use this type
of pan for pies, pie crusts or
bread.
NOTE: For more information about
food safety, call USDA’s Meat &
Poultry Hotline at 1-800-535-4555.
Foods that require turning should be
turned only once during broiling. Turn
after half the recommended cooking
time.
For cooking information, write to
the National Cattlemen’s Beef
Association, 444 North Michigan
Avenue, Chicago, Illinois 60611, or
call 1-800-368-3138.
S If using oven-proof glassware, or
dark pans such as Baker’s
Secret reduce the oven
temperature by 25°F except when
baking pies or bread. Use the
same baking time as called for in
the recipe.
S If using insulated bakeware,
expect cooking times to increase
slightly. It is not necessary to
adjust the oven temperature.
If you add additional ingredients
or alter the recipe, expect cooking
times to increase or decrease
slightly.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
CLEANING CHART
ABOUT CLEANING PRODUCTS
Read and carefully follow the manufacturer’s instructions.
Non-Abrasive or Scratchless Plastic or Nylon
Scouring Pads or Sponges -- Chore Boy Plastic
Cleaning Puff, Scrunge Scrub Sponges, or Scotch-Brite
No Scratch, Cookware or Kitchen Sponge.
Test a small inconspicuous area using a very light
pressure to see if the surface may scratch or discolor.
This is particularly important for porcelain enamel, highly
polished or shiny metal or plastic surfaces, and painted
surfaces.
Abrasive Scouring Pads -- S.O.S., Brillo Steel Wool
Soap, Scotch-Brite Pads.
(Brand names for the above cleaning products are registered
trademarks of the respective manufacturers.)
Glass Cleaners -- Bon Ami, Cinch, Glass Plus, Windex.
Dishwashing Liquid Detergents -- Dawn, Dove, Ivory,
Joy.
CAUTION
S Be sure appliance is off and all parts are cool before
handling or cleaning. This is to avoid damage and
possible burns.
Mild Liquid Spray Cleaners -- Fantastik, Formula 409.
Non-Abrasive Cleaners -- Bon Ami, paste of baking
soda and water.
S If a part is removed, be sure it is correctly replaced.
Mildly Abrasive Powder or Liquid All Purpose
Cleansers -- Ajax, Barkeepers Friend, Cameo, Comet,
Soft Scrub.
S To prevent staining or discoloration, clean
appliance after each use.
CLEANING CHART
PARTS
CLEANING AGENTS
CLEANING PROCEDURES
Never cover insert with aluminum foil as this prevents the fat from
draining to pan below.
1. Remove from oven after use. Cool then pour off grease.
2. Place soapy cloth over insert and pan; let soak to loosen soil.
3. Wash in warm soapy water. Use soap filled scouring pad to remove
stubborn soil.
Broiler pan
and insert
S Soap and water
S Plastic or soap
filled scouring pad
S Dishwasher
4. Broiler pan and insert can be cleaned in the dishwasher.
Burner box
S Soap and water
S Paste of baking
soda and water
S Non-abrasive
plastic pad or
The burner box is located under the lift-up cooktop. Clean frequently to
remove spillovers. If soil is not removed and is allowed to accumulate, it may
damage the finish. To clean remove grates and surface burners and clean
with soap and water, rinse and dry.
sponge
S Liquid cleaner
S Glass cleaner
Control knobs S Soap and water
S Mild liquid sprays
For ease of cleaning, turn off knob and remove by pulling forward.
1. Wash, rinse, and dry. Do not use abrasive cleaning agents as they may
scratch the finish and remove the markings.
S Glass cleaners
2. Turn on each burner to be sure knobs have been correctly replaced.
Enamel, painted
S Backguard
S Broiler door
S Manifold panel
S Oven door
S Soap and water
S Mild liquid cleaner
S Glass cleaner
NOTE: Use dry towel or cloth to wipe up spills, especially acid (milk, lemon
juice, fruit, mustard, tomato sauce) or sugary spills. Surface may discolor or
dull if soil is not immediately removed. This is especially important for white
surfaces.
1. When cool, wash with warm soapy water, rinse and dry. Never wipe a
warm or hot surface with a damp cloth as this may damage the surface
and may cause a steam burn.
S Side panels
2. For stubborn soil, use mildly abrasive cleaning agents such as baking
soda paste or Bon Ami.
3. Do not use abrasive, caustic or harsh cleaning agents such as steel wool
pads or oven cleaners. These products will scratch or permanently
damage the surface.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
CLEANING CHART
PARTS
CLEANING AGENTS
CLEANING PROCEDURES
Grates
S Soap and water
S Non-abrasive
plastic pad
Grates are made of porcelain--coated steel. They can be cleaned at the sink
with soap and water or in the dishwasher. To clean baked on soil, place a
damp soapy paper towel over the grate and let stand for 30 minutes. Use a
non--abrasive plastic pad to scour stubborn soil.
NOTE: Never operate burner without a grate in place. To protect the porce-
lain finish on the grate from excessive heat, never operate surface burner
without a cooking utensil on the grate. It is normal for grates to lose their
shine over a period of time.
Metal finishes
S Door handle
S Soap and water
S Glass cleaner
S Plastic or non-
abrasive pad or
sponge
1. Wash with soap and water or a glass cleaner and a soft cloth.
2. To prevent scratching or dulling of the finish, do not use mildly abrasive,
abrasive, or harsh cleaners, or caustic cleaners such as oven cleaners.
Oven rack
S Soap and water
S Plastic scouring
pad
S Cleansing powders
S Soap-filled
scouring pad
1. Clean with soapy water.
2. Remove stubborn soil with cleansing powder or soap-filled scouring pad.
Rinse and dry.
Porcelain enamel S Soap and water
Porcelain enamel is glass fused on metal and may crack or chip with misuse.
It is acid resistant, not acid proof. All spillovers, especially acid or sugar
spillovers, should be wiped up immediately with adry cloth. This is especially
important around the vent opening for smoothtop cooktop. Surface may
discolor or dull if soil is not removed.
S Cooktop
S Paste of baking
soda and water
S Non-abrasive
plastic pad or
sponge
S Oven bottom
S Oven interior
1. When cool, wash with soapy water, rinse and dry.
S Oven cleaner
2. Never wipe off a warm or hot surface with a damp cloth. This may cause
cracking and chipping.
3. Never use oven cleaners, abrasive or caustic cleaning agents on exterior
finish of range. Oven cleaners can only be used on porcelain oven cavity.
NOTE: Protect oven bottom against excessive spillovers especially acid or
sugary spillovers as they may discolor the porcelain. Use the correct size
cooking utensil to avoid boilovers. Never place cookware or aluminum foil
directly on the oven bottom.
Silicone Rubber
Door Gasket
S Soap and water
Door gasket is located on the oven front frame. DO NOT REMOVE
GASKET. Wash with soap. Rinse thoroughly.
Surface burners
S Soap and water
S Paste of baking
soda and water
S Plastic scouring
sponge or pad
S Mildly abrasive
cleaner
For ease of cleaning, remove soil from the burner as soon as burner has
cooled. If food boils over, remove pan to another burner. Then, cool soiled
burner and clean.
Clean, when cool, after each use with warm soapy water. Remove stubborn
soil by scouring with a non--abrasive plastic scouring pad and a paste of
baking soda and water. Clean ports with a straight pin or small metal paper
clip. Do not enlarge or distort the ports. Do not use a wooden toothpick. It
may break off and clog port. Surface burners can be dried in the oven set at
170°F. Burner must be dry before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
ABOUT YOUR RANGE
IGNITION SYSTEM
Your oven will feature either pilot ignition or pilotless
ignition. If the gas supply to the range is turned off, be
sure all controls are set in the OFF position before
re--supplying gas to the appliance.
To replace: Insert the two pins on the back of the cooktop
into the holes in the backguard. Lower the top into place
applying pressure at the front edges to secure top to the
range.
Pilot Ignition
BURNER GRATES
To light oven pilot: When cool, remove oven racks and
oven bottom. With the oven thermostat knob in the OFF
position, hold a lighted match to the pilot located at the
back end of the oven burner. Once the pilot lights, replace
oven bottom and racks.
CAUTION: Do not operate a surface burner without a pan
on the grate. The porcelain finish on the grate may chip
without a pan to absorb the intense heat from the burner
flame.
Burner grates must be properly positioned before cooking.
Burner grates are durable but may gradually lose their
shine due to usage and high temperatures.
Grates for the porcelain cooktop are square. When
installing square grates, place indented sides together so
straight sides are at front and rear.
Pilotless Ignition
With this type of ignition system, a glo bar will light the
oven burner. The oven will not operate during a power
failure or if the oven is disconnected from the wall outlet.
NOTE: A lighted match will not light the burner. No
attempt should be made to operate oven during a
power failure.
SURFACE BURNERS
Surface burners are secured in place during transportation
with a shipping screw.
COOKTOP
The cooktop featuring conventional surface burners lifts
up for easy cleaning of the burner box area.
To remove: When cool, first remove grates and drip
bowls, if equipped. Grasp two front burner wells and lift
up. The top can be completely removed.
Once the range is installed, these may be removed to
allow quick and easy removal of the burner.
To remove: Lift up and support or remove the cooktop.
When cool, grasp burner head and tilt to release tab from
slot near ignitor or pilot. Lift up and toward back of
cooktop until air shutter end of burner releases from valve.
To replace: Insert air shutter end of burner over valve and
lower into place. Replace cooktop. Turn on burner to be
sure burner has been correctly replaced.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
ABOUT YOUR RANGE
OVEN BOTTOM
To remove: When cool, loosen the two screws located
CAUTION
along the front of the oven bottom. Slide the screws back
to release the front of the oven bottom. Grasp oven
bottom, lift up and pull forward until rear tabs release.
Then, remove oven bottom from oven.
S Be sure all packing material is removed from oven
before turning on.
S Do not use oven for storing food or cookware.
S Many aerosol-type spray cans are EXPLOSIVE
when exposed to heat and may be highly flammable.
Avoid their use or storage near the oven.
S Allow steam and hot air to escape before reaching
into oven to check, add, or remove food.
S Prepared Food Warning: Follow food manufacturer’s
instructions. If a plastic frozen food container and/or
its cover distorts, warps, or is otherwise damaged
during cooking, immediately discard the food and its
container. The food could be contaminated.
S Follow the manufacturer’s directions when using
oven cooking bags.
To replace: Insert the tabs into the slots on the back oven
wall. Lower into place. Slide two screws forward and
tighten. Be sure bottom is fitted into slots and screws are
tight. If not correctly replaced, oven bottom may become
warped and cooking results will be affected.
OVEN DOOR
CAUTION
S WARNING: NEVER place excessive weight on or
stand on an open oven door. This could cause the
range to tip over, break the door, or injure the user.
BROILER DRAWER
To remove: When broiler is cool, remove broiler insert
and pan. Open drawer halfway and pull metal clip located
in center of drawer bottom upward as far as it will go
(about 2 inches). The drawer can now be pulled all the
way out of the compartment.
S NEVER place fingers between hinge and front oven
frame. Hinge arms are spring mounted. If
accidently hit, the hinge will slam shut against oven
frame and could injure your fingers.
When baking, be sure oven door is completely closed.
Baking results will be affected if door is not closed.
The oven door is not designed to be removed by the
consumer.
When opening the oven door, allow steam and hot air to
escape before reaching in oven to check, add or remove
food.
To replace: Slide grooves at top of drawer onto guide
rails at sides of broiler compartment and push drawer in to
close.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
ABOUT YOUR RANGE
Rack Positions:
OVEN RACK
S For optimum results, air must circulate freely within
the oven and around the food. To help ensure this,
place food in the center of the oven. Allow two
inches between the edge of the pan(s) and the oven
walls.
CAUTION
Do not attempt to change the rack position when the
oven is hot.
S Position the rack so the food is in the center of the
oven. Use either rack position 2 or 3.
The oven rack is designed with a safety lock-stop position.
This prevents the rack from accidently coming completely
out of the oven when pulling the rack out to add or remove
food.
RACK 3: Used for baked goods on a cookie sheet or jelly
roll pan, or frozen convenience foods.
RACK 2: Used for most baking, roasting small cuts of
meat, and large casseroles.
To remove oven rack:
1. When rack is cool, pull rack straight out until it stops at
the lock-stop position.
RACK 1: Used for roasting large cuts of meat and large
poultry, pies, souffles, or angel food cake.
NOTE: If it is necessary to change rack position when
rack is hot, use potholders to protect hands.
4
2. Tilt the front end of the rack up.
3. Continue pulling rack out of oven.
3
2
1
RACK
SUPPORT
LEVELING LEGS
CAUTION
To replace oven rack:
WARNING: The anti-tip bracket provided with this
range must secure one of the rear leveling legs to the
floor. This bracket prevents the range from accidently
tipping.
1. Place rack on the rack supports in oven.
2. Tilt the front end of the rack up slightly.
3. Slide rack back until it clears the lock-stop position.
The installer should level the range when it is installed.
4. Lower front of rack and slide rack straight back into
oven.
If the range is not level, turn the leveling legs, located at
each corner of the range, until range is level. Place level
on an oven rack to determine if range is level.
5. Pull rack out to the lock-stop position to be sure rack is
correctly replaced. Push rack back into oven and close
oven door.
Cooking results can be affected if the range was not
properly leveled during installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
ABOUT SERVICE
CAUTION
S Do not attempt to service this appliance yourself
unless directed to do so in this manual or the chart
below. Refer all other servicing to a qualified servicer
or call us at 1-800-688-9900.
S Locate and mark circuit breaker or fuse. Never
replace a blown fuse or reset a circuit breaker until
you know what caused the problem. Always replace
a blown fuse with one of the correct amperage, do
not use a substitute.
S Always disconnect power to unit before any servicing
by tripping circuit breaker to the OFF position or by
removing the fuse.
TROUBLESHOOTING CHART
PROBLEM
CAUSE
CORRECTION
Surface burner fails to light.
a. power supply not connected
a. connect power, check circuit
breaker or fuse box
b. see page 5 for instructions on
bleeding air from the gas line
c. clean ports with straight pin or small
metal paper clip
b. air in the gas line
c. clogged burner port(s)
d. surface control not completely
turned to the LITE position or turned
too quickly from the LITE position
e. power failure (pilotless ignition)
d. turn control to the LITE position until
the burner ignites, then turn control
to desired flame size
e. see page 5 to light burner during a
power failure
Burner flame is uneven.
a. clogged burner port(s)
a. clean ports with straight pin
Surface burner flame lifts off port
or is yellow in color.
a. air/gas mixture not proper
a. call serviceman to adjust burner
NOTE: Some yellow tipping with LP
gas is normal and acceptable.
NOTE: Be sure installer properly
adjusted range at time of installation.
Oven burner fails to light.
a. power supply not connected
b. power failure
a. connect power, check circuit
breaker or fuse box
b. oven will not operate during a power
failure
c. See page 7
c. oven incorrectly set
Popping sound heard when
burner extinguishes.
This is a normal sound that occurs with some types of gas when a hot burner is
turned off. The popping sound is not a safety hazard and will not damage the
appliance.
Baking results are not
satisfactory.
• browning is too pale, too dark or
is uneven.
• food cooks unevenly.
• food is underdone or
overdone.
a. oven not preheated or set at correct
temperature.
b. used incorrect rack position
c. incorrect use of aluminum foil
d. oven bottom incorrectly replaced
e. oven thermostat sensing device is
out of the holding clip(s).
a. preheat oven 8 to 15 minutes
b. see page 13
c. see page 7
d. replace oven bottom correctly
e. reinstall thermostat sensing device
Download from Www.Somanuals.com. All Manuals Search And Download.
15
ABOUT SERVICE
PROBLEM
CAUSE
CORRECTION
Baking results differ from
previous oven.
a. Oven seems hotter or cooler than
your previous oven.
a. Oven temperatures may vary
between the new and the old oven.
As ovens age, the oven
temperature often “drifts” and may
become hotter or cooler. Also,
newer ovens may operate
differently from older ovens. You
should expect some differences in
baking results.
Oven smokes
excessively during
a broil operation.
a. food too close to burner
a. move broiler pan down one rack
position
b. trim fat
c. apply sauce during last few minutes
of cooking. If meat has been
marinated, drain thoroughly before
cooking
d. always clean broiler pan and insert
after each use
b. meat has too much fat
c. sauce applied too early or marinade
not completely drained
d. soiled broiler pan
e. broiler insertcovered with aluminum
foil
e. never cover insert with foil as this
prevents fat from draining to pan
below
f. oven bottom is soiled
f. clean oven bottom
Strong odor or light smoke
when oven is turned
This is normal for a new range and will disappear after a few uses. Opening a window
or turning on a fan will help remove the smoke and odor.
on the first few times.
HOW TO REMOVE RANGE FOR CLEANING
AND SERVICING
Follow these procedures to remove appliance for cleaning
or servicing:
ELECTRICAL CONNECTION
Appliances which require electrical power are
equipped with a three-prong grounding plug which
must be plugged directly into a properly grounded
three-hole 120 volt electrical outlet.
1. Shut-off gas supply to appliance.
2. Disconnect electrical supply to appliance, if equipped.
3. Disconnect gas supply tubing to appliance.
4. Slide range forward to disengage range from the
anti-tip bracket. (See Installation Instructions for
location of bracket.)
Always disconnect powe
appliance before servici
5. Reverse procedure to reinstall. If gas line has been
disconnected, check for gas leaks after reconnection. A
qualified servicer should disconnect and reconnect the
gas supply. (See Installation Instructions for gas leak
test method.)
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD
PLUG.
To prevent range from accidently tipping, range must be
secured to the floor by sliding rear leveling leg into an
anti-tip bracket supplied with the range.
WARNING: Possible risks may result from abnormal
usage, including excessive loading of the oven door
and of the risk of tip over, should the appliance not be
reinstalled according to the installation instructions.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY & SERVICE
What is Not Covered By These Warranties
Warranty
1. Conditions and damages resulting from any of the following:
Limited One Year Warranty -
a. Improper installation, delivery, or maintenance.
Parts and Labor
b. Any repair, modification, alteration, or adjustment not authorized by the
manufacturer or an authorized servicer.
For one (1) year from the original retail
purchase date, any part which fails in
normal home use will be repaired or
replaced free of charge.
c. Misuse, abuse, accidents, or unreasonable use, or acts of God.
d. Incorrect electric current, voltage, electrical and/ or gas supply.
e. Improper setting of any control.
2 Warranties are void if the original serial numbers have been removed, altered,
or cannot be readily determined.
Canadian Residents
The above warranties only cover an
appliance installed in Canada that has been
certified or listed by appropriate test
agencies for compliance to a National
Standard of Canada unless the appliance
was brought into Canada due to transfer of
residence from the United States to
Canada.
3. Light bulbs, water filters and air filters.
4. Products purchased for commercial or industrial use.
5. The cost of service or service call to:
a. Correct installation errors. For products requiring ventilation, rigid metal
ducting must be used.
b. Instruct the user on the proper use of the product.
c. Transport the appliance to and from the servicer.
The specific warranties expressed above
are the ONLY warranties provided by the
manufacturer. These warranties give you
specific legal rights, and you may also have
other rights which vary from state to state.
6. Any food loss due to refrigerator or freezer product failures.
7. Expenses for travel and transportation for product service in remote locations.
8. Outside of the United States and Canada this warranty does not apply. Contact
your dealer to determine if another warranty applies.
9. Consequential or incidental damages sustained by any person as a result of any
breach of these warranties. Some states do not allow the exclusion or limitation
of consequential or incidental damages, so the above exclusion may not apply.
CUSTOMER'S SOLE AND EXCLUSIVE
REMEDY UNDER THIS LIMITED WARRANTY
SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST
PERIOD ALLOWED BY LAW. MAYTAG
CORPORATION SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL
If You Need Service
First see the Troubleshooting section in your Use and Care Guide or call the dealer
from whom your appliance was purchased or call Maytag Services, LLC, Customer
Assistance at 1-800-688-9900 USA and 1-800-688-2002 Canada to locate an
authorized servicer.
DAMAGES. SOME STATES AND PROVINCES
DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR
• Be sure to retain proof of purchase to verify warranty status. Refer to
WARRANTY for further information on owner’s responsibilities for warranty
service.
CONSEQUENTIAL DAMAGES, OR
• If the dealer or service company cannot resolve the problem, write to Maytag
Services, LLC, Attn: CAIR® Center, P.O. Box 2370, Cleveland, TN 37320-2370, or
call 1-800-688-9900 USA and 1-800-688-2002 Canada. U.S. customers
using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
LIMITATIONS ON THE DURATION OF IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS, SO THESE EXCLUSIONS OR
LIMITATIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY STATE TO
STATE OR PROVINCE TO PROVINCE.
• User’s guides, service manuals and parts information are available from Maytag
Services, LLC, Customer Assistance.
Notes: When writing or calling about a service problem, please include:
a. Your name, address and telephone number;
b. Model number and serial number;
c. Name and address of your dealer or servicer;
d. A clear description of the problem you are having;
e. Proof of purchase (sales receipt).
Form No. A/08/06
Part No. 8113P644
©2006 Maytag Appliances Sales Co.
All rights reserved.
Litho U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|