Download from Www.Somanuals.com. All Manuals Search And Download.
The guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.* Tests for SAR are
conducted using standard operating positions
specified by the FCC with the phone transmitting at
its highest certified power level in all tested
frequency bands.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section
http://www.fcc.gov/oet/fccid after searching on the
FCC ID: OVFKWC-K27.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels
so as to use only the power required to reach
the network.
Caution
The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the warranty
and user’s authority to operate the equipment.
In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model. The body-
worn SAR values were obtained by using Kyocera
Wireless Corp. [KWC] supplied and approved
universal pouch CV90-61344-02(03) or case
CV90-M2834-01.
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to
optimize the performance and life of your phone
and battery.
Air bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
While there may be differences between the SAR
levels of various phones and at various positions,
they all meet the government requirement for
safe exposure.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
Blasting areas—Turn off your phone where blasting
is in progress. Observe restrictions, and follow any
regulations or rules.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
They include:
If you have any reason to suspect that
interference is taking place, turn off your phone
immediately.
•
•
•
fueling areas such as gas stations
below deck on boats
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your
service provider or call the customer service line
to discuss alternatives.
transfer or storage facilities for fuel
or chemicals
•
•
•
vehicles using liquefied petroleum gas, such as
propane or butane
Other medical devices—If you use any other personal
medical device, consult the manufacturer of the
device to determine if it is adequately shielded
from external RF energy. Your physician may be
able to help you obtain this information.
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
Use with care
In health care facilities—Turn your phone off in health
care facilities when instructed. Hospitals and
health care facilities may be using equipment that
is sensitive to external RF energy.
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
Keep phone dry
Potentially unsafe areas
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
Aircraft—FCC regulations prohibit using your phone
on a plane that is in the air. Turn your phone off or
switch it to Airplane Mode before boarding aircraft.
Resetting the phone
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
Vehicles—RF signals may affect improperly installed
or inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer of the
device to determine if it is adequately shielded
from external RF energy. Your physician may be
able to help you obtain this information.
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Hearing Aid Compatibility (HAC) with Mobile Phones
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user. Some hearing devices are
more immune than others to this interference
noise, and phones also vary in the amount of
interference they generate.
To shop online for phone accessories, visit
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all
phones have been rated.
To order by phone, call 800-349-4188
(U.S.A. only) or 858-882-1410.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
Phones that are rated have the rating on their box
or a label on the box. The ratings are not
guarantees and results will vary depending on the
user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to
interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for
your personal needs.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held
wireless phones. These guidelines are consistent
with the safety standards previously set by both
U.S. and international standards bodies in the
following reports:
M-Ratings— Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that
are not labeled. M4 is the better/higher of the
two ratings.
•
ANSI C95.1
(American National Standards Institute, 1992)
•
NCRP Report 86
(National Council on Radiation Protection and
Measurements, 1986)
T-Ratings— Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with
•
ICNIRP
(International Commission on Non-Ionizing
Radiation Protection, 1996)
a hearing device’s telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. T4 is
the better/higher of the two ratings. (Note that not
all hearing devices have telecoils in them.)
Your phone complies with the standards set by
these reports and the FCC guidelines.
Hearing devices may also be measured for
immunity to this type of interference. Your hearing
device manufacturer or hearing health professional
may help you choose the proper rating for your
mobile phone. The more immune your hearing aid
is, the less likely you are to experience interference
noise from mobile phones.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
v
For more information about hearing aid
compatibility, visit the FCC's Consumer &
Governmental Affairs Bureau Web site at
Hearing Aid Compatibility (HAC) Rating: M3
Battery and charger specifications
Travel Charger Input
Output
CE90-R2231-01
CV90-G2588-01
CV90-G2589-01
100-240 VAC / 50/60 Hz
4.5 V 1.2 A
5.2 V 400 mA
4.5 V 1.2 A
Output
120 VAC / 60Hz
85-264 VAC / 50/60 Hz
Vehicle Charger Input
CV90-G2959-01
CV90-K0278-01
100-240 VAC / 50 / 60 Hz 4.5 V 1.2 A
120 VAC / 60Hz 5.2 V 400 mA
Standard Battery CV90-N3344-01, 3.7V / 850mAh
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at www.kyocera-wireless.com
To purchase accessories, visit
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Personalizing the screen . . . . . . . . . . . . . . . . . . 32
Creating a secure environment. . . . . . . . . . . . . . 34
Network settings . . . . . . . . . . . . . . . . . . . . . . . . 35
Accessory Settings . . . . . . . . . . . . . . . . . . . . . . . 36
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
Installing the battery. . . . . . . . . . . . . . . . . . . . . . .1
Getting to know your phone . . . . . . . . . . . . . . . . .3
2
Making and Answering Calls . . . . . . . . . . 7
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the speakerphone. . . . . . . . . . . . . . . . . . . .8
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . .10
Calling emergency services. . . . . . . . . . . . . . . . .11
Understanding roaming . . . . . . . . . . . . . . . . . . .12
7
Using Voice Recognition. . . . . . . . . . . . . 37
Setting up voice dialing . . . . . . . . . . . . . . . . . . . 37
Calling using voice tags . . . . . . . . . . . . . . . . . . . 37
Calling using digit dialing. . . . . . . . . . . . . . . . . . 38
Training voice recognition . . . . . . . . . . . . . . . . . 40
8
9
Using Media Gallery. . . . . . . . . . . . . . . . . 41
Accessing files . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Creating free space . . . . . . . . . . . . . . . . . . . . . . 42
3
4
Entering Letters, Numbers,
and Symbols . . . . . . . . . . . . . . . . . . . . . . 14
Storing Contacts . . . . . . . . . . . . . . . . . . . 17
Creating a new contact . . . . . . . . . . . . . . . . . . . .17
Adding a code or extension . . . . . . . . . . . . . . . .17
Customizing your contacts . . . . . . . . . . . . . . . . .17
Editing a contact . . . . . . . . . . . . . . . . . . . . . . . .18
Erasing a contact . . . . . . . . . . . . . . . . . . . . . . . .19
Customizing a phone number. . . . . . . . . . . . . . .19
Finding contact information . . . . . . . . . . . . . . . .19
Using caller groups . . . . . . . . . . . . . . . . . . . . . .20
Using Tools and Games . . . . . . . . . . . . . 43
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
World Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
5
6
Sending and Receiving
Text Messages . . . . . . . . . . . . . . . . . . . . . 22
Sending text messages . . . . . . . . . . . . . . . . . . . .22
Retrieving text messages. . . . . . . . . . . . . . . . . . .25
Creating and editing prewritten
10 Connecting to the Internet . . . . . . . . . . . 49
Using the Mobile Web . . . . . . . . . . . . . . . . . . . . 49
11 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 51
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
messages (QuickText) . . . . . . . . . . . . . . . . . . . .27
Customizing Your Phone . . . . . . . . . . . . 28
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . .29
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . .29
Setting sounds for your phone . . . . . . . . . . . . . .30
Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . .30
Setting message alerts . . . . . . . . . . . . . . . . . . . .31
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . . . .31
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GETTING STARTED
Installing the battery
Your Kyocera K132 phone comes with a
removable lithium ion (LiIon) battery.
Fully charge the battery before using the phone.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
To install the battery:
1. Connect the AC adapter
to the jack on the
1. Hold the phone face
down.
bottom of the phone.
2. Toward the bottom of
the phone there is a
recess to aid you in
opening the battery
door. Use your
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
•
•
•
Charging (the icon is animated)
Partially charged
fingernail to pull the
battery door away.
Fully charged
3. Place the battery in the
phone casing with the
metal contacts toward
the bottom of the phone.
Note: The battery will not charge if you use the
phone while it is connected to an AC adapter.
Note: If you are using a 400 mA charger with any
of the following part numbers: CV90-G2968-01;
CV90-G2610-02; or CV90-60859-1, please be
aware that this power unit is intended to be
correctly oriented in a vertical or floor
mount position.
4. Place the battery door
tab in the openings near
the top of the phone.
5. Press the battery door
until it clicks into place.
Recharging the battery
Note: Before you remove the battery, make sure
the phone is powered off.
You can safely recharge the battery at any time,
even if it has a partial charge.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Caring for the battery
Performing basic functions
Turn the phone on and off: Press and hold
the phone beeps or plays a tone.
until
General safety guidelines
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
Make a call: Enter the number and press
.
End a call: Press
.
If you have not used the battery for more than
a month, recharge it before using your phone.
Answer a call: Open the flip and press
.
Access voicemail: Press and hold
and follow
Avoid exposing the battery to extreme
temperatures, direct sunlight, or high
humidity.
the system prompts.
Verify your phone number: Select Menu →
Settings → Phone Info.
Silence the ringer on an incoming call:
•
Never dispose of any battery in or near a fire.
It could explode.
Press then
-or-
to answer.
Common causes of battery drain
•
•
•
Playing games or using the Web.
Keeping backlighting on.
Press the side volume key
then to answer.
up or down
Operating in analog ( ) mode. Your phone
switches between modes to find the best
signal. To set your phone to operate in a single
mode, select Menu → Settings →
Silent Mode shortcut: Press and hold
Record a voice memo: Press and hold
Access Recent Calls list:
.
right.
Network → Digital/Analog.
Press and
hold down.
•
Operating in digital mode when far away from
a base station or cell site.
Launch the Browser:
Press and
hold left.
•
•
Using data cables or accessories.
Access your custom menu: Press and hold
up.
(see “Creating and updating your custom menu”
on page 32 for instructions on setting up your
custom menu).
Operating when no service is available, or
service is available intermittently.
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted alerts.
2
Installing the battery
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your phone
Home screen.
1
2
3
Left softkey accesses menus and functions.
Navigation key scrolls through lists and text entry fields and
accesses shortcuts from the home screen.
Send/Talk key starts or answers calls. Press once to activate voice
dialing, twice to display the Recent Calls list, and three times to
redial the last dialed number.
4
5
Back key erases characters in text entry and returns to the
previous screen.
Keypad for entering numbers, letters, or symbols.
6
7
8
* Shift key changes the text mode in text entry.
Right softkey accesses the Contacts directory and other
menu options.
OK key selects a menu item or option.
9
End/Power key turns the phone on and off, ends a call or browser
10
session, and returns you to the home screen from other menus.
Speakerphone key activates the speakerphone and answers
11
incoming calls.
# Space key enters a space during text entry. Activates Silent mode.
12
13
14
0 Next key cycles through word choices during text entry.
Jack for AC adapter (included)
.
Warning:
Inserting an accessory into the incorrect jack will damage the phone.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Antenna (does not extend)
15
16
17
18
Jack=for hands-free headset and data cable (sold separately)
Volume key to raise or lower speaker volume.
External speaker for speakerphone and alerts.
.
Warning:
Inserting an accessory into the incorrect jack will damage the phone.
4
Getting to know your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Using menus
The contents of the main menu are as follows:
Recent Calls
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
Recent Calls Timer OutBox
All Calls Timer Saved
Messages
New Text Msg
Voicemail
InBox
Browser Alerts
Sent
Settings
Silent Mode
Sounds
Tools & Games
Brick AttackTM
Race 21TM
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Web Browser
Connects to Internet
*
*
Phone Info
Platform
Display
Convenience
Voice Features
Messaging
Security
Your Number
SW Version
PRL Version
Factory Config
ESN
Home Calls Timer* Drafts
Network
Roam Calls Timer* Msg Settings
Accessories
Stopwatch
World Clock
Technology
SID
Browser Info
Icon Key
Erase Messages
Contacts
View All
Media Gallery
Images
Add New
View Groups
Speed Dial List
Voice Dial List*
Information
Sounds
BREW Apps*
Mobile Shop*
Settings
Help
*These features may not be available on your phone or may have different names. Contact your service provider for
more information.
Navigating through menus
•
Press the left soft key
Press left, right, up, or down to view
menus and options.
to select Menu.
In this guide, an arrow → tells you to select an
option from a menu.
•
For example, Menu → Settings means select Menu
then select the Settings option.
•
•
•
Press
Press
to select a menu item.
to back up a menu level.
Note: To change the way the menus appear, see
“Choosing a menu view” on page 32 for details.
Press to return to the home screen.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Understanding screen icons
These icons may appear on your phone’s home screen.
(blinking) The phone is sending high-
speed data.
The phone is operating in IS2000 (1X)
digital mode.
(blinking) The phone is receiving high-
speed data.
The phone is operating in
IS95 digital mode.
High-speed data service is available, but
the phone is dormant.
The phone is operating in Analog
(FM) mode.
The phone is at the home screen. To
access Menu, press the left soft key
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
.
The phone is at the home screen. To
access Contacts, press the right soft
A call is in progress.
key
.
The phone is set to light up instead of
ring.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is set to vibrate or to vibrate
and then ring.
The phone is roaming outside of its
home service area.
Position location is set to your service
provider and to emergency services.
You have a voice message.
The battery is fully charged. The more
black bars, the greater the charge.
Position location is set to emergency
services only.
The alarm clock is set.
DRM protected.
The phone is in privacy mode or is
accessing a secure Web site.
Auto-Answer is on.
Speakerphone is on.
High-speed (3G) data service is
available and active on your phone.
Check with your service provider for
availability.
6
Getting to know your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can be
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up, depending on your settings.
The phone number of the caller appears on the
home screen if the flip is open. If the number is
stored in your Contacts directory, the contact
name also appears.
received. Look for
on the home screen.
Note: The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
1. Open the flip.
1. Open the flip.
2. Enter the phone number and press
.
2. Press
to answer the incoming call.
3. Press or close the flip to end the call.
- or -
Press to answer the incoming call and turn
on the speakerphone simultaneously.
Redialing a number
Press
•
three times to redial the last
number called.
Setting Open to Answer
The default setting of your phone requires you to
Calling a saved number
Use your Contacts directory to quickly find a
saved number.
press
to answer an incoming call. You can set
the phone to answer immediately when you open
the flip.
1. Press the right soft key
to select Contacts.
•
Select Menu → Settings → Convenience →
Open to Answer → Enabled.
2. Scroll down the list to find the contact you
want to call.
–
Select Disabled to have the phone continue
3. Highlight the name and press
to dial
ringing when you open the flip.
the number.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Silencing an incoming call
Setting the phone to hold calls
•
Press or
to silence the call.
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Note: In the absence of voicemail, this feature
drops the call.
- or -
Note: This feature will not work if “Open to
Answer” is enabled. See “Setting Open to Answer”
on page 7.
•
Press
to answer it.
to silence the call then press
Either action silences only the current call. The
next call will ring according to your settings.
1. Select Menu → Settings → Convenience →
Hold Call → Enabled.
2. If you have not recorded a hold message, you
will be prompted to record one, such as
“Please hold. I’ll answer in a minute.”
Adjusting the volume during a call
•
To adjust the earpiece volume during a call,
press or up or down.
a. Press the left soft key
to select Record.
b. Record the message and select Save.
Using the speakerphone
c. Select OK to record the message again.
Your Kyocera K132 phone has a built-in
speakerphone that you can use during a call when
the flip is open.
d. Select Save or Options (Play, Re-Record, or
Exit).
The next time a call comes in, you will have the
option of placing it on hold.
Note: This function works only for the
current call. Once the call is ended, the
speakerphone turns off and the earpiece
volume returns to normal.
Placing a call on hold
You can place a call on hold once you have
enabled this feature.
1. Open the flip.
2. Press
speakerphone simultaneously. “
is ON” displays on the screen.
to answer the call and turn on the
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
Speaker
- or -
Press
1. When a call comes in, press the right soft key
to turn on the speakerphone at any
to select Hold Call. The caller will be
time during a call.
To turn off the speakerphone, press
.
8
Using the speakerphone
Download from Www.Somanuals.com. All Manuals Search And Download.
placed on hold and will hear your recorded
hold message.
1. Select Menu → Settings → Sounds →
Missed Call Alert
2. To speak to the caller, select Answer.
- or -
2. Highlight an option and press
.
To hang up without speaking to the caller,
select End Call.
Viewing recent call details
Details on the last 30 calls you made, received, or
missed are stored in the Recent Calls list and are
identified by the following icons:
Changing the hold message
1. Select Menu → Settings → Convenience →
Hold Call → Re-Record Msg and follow
the prompts.
Outgoing call
Incoming call
2. Record the message twice.
Missed call (flashing)
3. Select Save or Options
(Play, Re-Record, or Exit).
Viewing recent calls
1. Select Menu → Recent Calls.
Dealing with missed calls
2. Select a list: All Calls, Incoming Calls, Outgoing
When you have missed a call, “Missed Call”
appears on your screen unless the caller
leaves a voicemail.
Calls, or Missed Calls.
3. Highlight a recent call and press the right soft
key
to select Options:
•
To clear the screen, open the flip and press
the left soft key to select OK.
To view details of the call, press the right soft
key to select Calls. Highlight the missed
–
Save adds the phone number to the
Contacts list.
•
–
–
Send Msg allows you to send a text
message to the phone number.
call number and press the left soft key
select Details.
to
Erase erases the selected call record.
•
To return the call, highlight the number and
press
Note: If the phone number has been classified as
“secret,” you must enter your four-digit lock code
to view or edit it. For information on the lock
code, see “Changing your lock code” on page 34.
To classify a phone number as secret, see
“Creating a new contact” on page 17.
.
Setting missed call alerts
You can set an alert to beep every five minutes
after you have missed a call.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Note: You must (1) enable 1-Touch dialing on
your phone and (2) have a speed dial location
assigned to a contact.
Calling recent calls
1. Open the flip.
2. Press and hold
down.
Enabling 1-Touch dialing
3. Highlight a number to call and press
.
•
Select Menu → Settings → Convenience →
Erasing recent calls
1. Select Menu → Recent Calls →
Erase Call Lists.
1-Touch Dialing → Enabled.
Using 1-Touch dialing
To call a contact that has a speed dial location:
2. Select an option: All Calls, Incoming Calls,
Outgoing Calls, or Missed Calls.
•
From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then press
and hold the second digit. For example, if the
speed dialing location is 15, press
3. Press the left soft key
to select Yes.
Speed dialing
Before you can use speed dialing, you must save a
phone number as a contact and assign a speed
dial location to it.
briefly then press and hold
.
Setting up voicemail
•
To add a speed dial location to a saved or new
contact, see “Customizing a phone number”
on page 19.
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider. All
unanswered calls to your phone are then
automatically transferred to voicemail, even if
your phone is in use or turned off.
Using speed dialing
To call a contact that has a speed dial location:
•
From the home screen, enter the one- or two-
digit speed dialing location and press
1. From the home screen, press and hold
.
.
2. Follow the system prompts to create a
password and record a greeting.
1-Touch dialing
1-Touch dialing is the fastest way to call a
saved contact.
Note: If you have trouble accessing your
voicemail, contact your service provider.
10
Speed dialing
Download from Www.Somanuals.com. All Manuals Search And Download.
You can call the code even if your phone is
locked, has no balance, or your account is
restricted. When you call, your phone enters
Emergency mode. This enables the emergency
service exclusive access to your phone to call you
back, if necessary. To make or receive regular
calls after dialing the code, you must exit
this mode.
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
If you see “New Messages” on
your screen
1. Press the left soft key
call your voicemail number.
2. Press when you hear your greeting.
to select Call and
To exit Emergency mode
When you have completed the emergency call:
1. Press the left soft key
to select Exit.
3. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
2. Press the left soft key
again to confirm
your choice.
•
Press the right soft key
to select Ignore.
Note: To determine who has access to your
location, see “Setting position location” on
page 36.
If you see only the
symbol
to call to your
1. Press and hold
voicemail number.
2. Follow the prompts to retrieve the message.
Using your phone in an airplane
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control.
Note: You can set the phone to beep or vibrate
every five minutes to remind you that you have a
voicemail message. See “Setting message alerts”
on page 31.
In Airplane mode, however, your phone will not
emit RF signals. You cannot make or receive calls,
send text messages, or use the Web, but you can
play games, use the Scheduler, set the clock, and
make emergency calls to designated
Calling emergency services
Regardless of your 3-digit emergency code (911,
111, 999, 000, etc.), your phone operates as
described below.
emergency numbers.
•
Dial your 3-digit emergency code and
press
Note: Please check with uniformed personnel
before operating your phone in Airplane mode.
.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
11
–
Roam Calls Timer tracks all the roam calls
you have made. To reset this timer, press
Setting Airplane mode
1. Select Menu → Settings → Convenience →
Airplane Mode.
the left soft key
to select Reset. This
will reset both the Home Calls and the
Roam Calls Timer.
2. Press the left soft key
reading the message.
to select OK after
3. Select Enabled or Disabled.
Timing your calls
You can set your phone to beep 10 seconds
4. Select Yes or No to set the date and time.
5. Press the left soft key
to select Done.
before each minute passes when you are on a call.
•
Select Menu → Settings → Sounds →
Tracking calls
You can track the number and duration of calls
made and received on your phone.
Minute Alert → Enabled.
Understanding roaming
1. Select Menu → Recent Calls.
2. Select a timer:
Setting an alert for roaming
The phone can alert you when you roam outside
of your home service area.
–
Recent Calls Timer tracks all calls you have
made and received since you last reset this
timer. To reset this timer, press the left soft
1. Select Menu → Settings → Network →
Roam/Svc Alert.
key
to select Reset.
2. Select an option and press
.
–
–
All Calls Timer tracks all calls you have
made and received. This timer cannot
be reset.
–
When no svc alerts you with three tones
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
Home Calls Timer tracks all calls you have
made while your phone is not roaming. To
reset this timer, press the left soft key
to select Reset. This will reset both the
Home Calls and the Roam Calls Timer.
–
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
12
Understanding roaming
Download from Www.Somanuals.com. All Manuals Search And Download.
–
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
1. Select Menu → Settings → Network →
Digital/Analog.
2. Select an option and press
.
–
Automatic automatically switches the
phone between digital and analog.
Setting the roam ringer
–
Digital only sets the phone to work in
digital mode only.
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
•
Select Menu → Settings → Sounds →
Roam Ringer → Enabled. You will hear
the ringer.
Turning roaming on or off
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
Setting Call Guard
You can set the phone to warn you before you
answer or place a call while roaming.
1. Select Menu → Settings → Network →
Roam Option.
•
Select Menu → Settings → Convenience →
Call Guard → Call Prompt.
2. Select an option and press
.
–
Automatic (recommended setting) accepts
–
The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
any system the phone service provides.
–
No roaming prevents you from making
or receiving calls outside of your home
service area.
–
To accept or place a call while roaming,
you must press
.
Note: If your phone has more than one setting for
Automatic, contact you service provider to
determine which one to use.
Note: Call Prompt is disabled when the phone is
in emergency mode.
Setting digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
13
3
ENTERING LETTERS, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Entering numbers
•
•
To enter a number while in
a number key once.
mode, press
or
Understanding text entry
screens
The current text entry mode (and capitalization
setting, when applicable) is indicated by an icon.
To enter a number while in
mode, press and hold a number key until the
number appears on the screen.
Entering words letter by letter
characters
remaining
capitalization setting
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
text entry mode
text entry
fields
2. Wait for the cursor to move right, then enter
the next letter.
Note: To enter a space, press
.
Text entry modes
There are six text entry modes:
Entering words quickly
When you press a series of keys using
checks its dictionary of common words and
guesses at the word you are trying to spell.
mode,
Case change
Numbers only
Rapid Entry
Add Smiley
Normal alpha
Add Symbol
1. For each letter of the word you want, press the
Note: The mode you start in depends on the task
you are performing. For example, when entering
a phone number, you’re in number mode. When
entering a name for a contact, you’re in normal
text mode. See “Changing modes” on page 15.
key once. For example, to enter the word
“any” press
2. If the word doesn’t match what you want,
press to look at other word matches.
3. When you see the word you want, press
→
→
.
.
14
Entering Letters, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering symbols
Changing modes
While entering text, you can enter symbols by
Sometimes you need to change modes. For
pressing
until you see the symbol you want.
example, to enter numbers in an email address
Using this method, you have access to the
following symbols:
while in
mode, enter the numbers, and then change
back to mode to complete the address.
mode, you must change to
.
@
?
!
-
,
&
:
‘
1
To change text entry modes:
To access the full set of symbols:
1. From the text entry screen, select Options.
•
Press and hold
until the icon for the
mode you want appears.
-or-
2. Select
Add Symbol.
3. Press
down to view the list of symbols.
•
Select Options, then select a different mode.
4. Press the number key corresponding to the
Capitalization settings
You can change your capitalization setting at any
symbol you want.
Entering smileys
time while entering text. Press
upper or lower case while in
mode.
to choose
Normal Alpha
1. From the text entry screen, select Options.
2. Select
Add Smiley.
3. Press
down to view the list of smileys.
4. Press the number key that corresponds to the
smiley you want.
Switching default text entry modes
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
1. Select Menu → Messages →
Msg Settings → Default Text.
2. Select Normal Alpha or Rapid Mode.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 14.
Use mode and press a key once to enter its number.
For more options, see page 14.
Enter a number
Enter a symbol
Enter a smiley
Press
Use
until you find the symbol you want. See page 15.
mode and press a key once to enter its number.
For more options, see page 15.
Enter a space
Press
Press
.
Erase a character
.
Erase a word
Press and hold
.
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Press
Press
right or left.
up or down.
Press and hold
.
In
In
mode, press
mode, press
. Choose
. Choose
.
Lowercase any letter
Select soft options on the screen
.
Press the appropriate key, left
Press right or left.
or right
.
Highlight an option at the bottom of
the screen
16
Entering Letters, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
4
STORING CONTACTS
Use your phone’s Contacts directory to store
information about a person or company. Each
contact entry can have up to six phone numbers,
two email addresses, two Web addresses, two
street addresses, and a space for notes.
Adding a code or extension
When you save the phone number of an
automated service, you may include a pause to
stop dialing, such as when waiting to dial an
extension.
1. From the home screen, enter the first portion
Creating a new contact
1. From the home screen, enter the phone number
of the phone number.
2. Press the right soft key
to select Options.
you want to save, including the area code.
3. Select a type of pause:
2. Press the left soft key
3. Press to select Save New Contact.
4. Enter a name for the contact.
to select Save.
–
–
Time Pause
Hard Pause
4. Enter the remaining numbers.
–
If you need to learn how to enter letters,
see “Understanding text entry screens” on
page 14.
5. Press the left soft key
to select Save.
Customizing your contacts
–
To add a symbol or smiley to the
contact name, or to change the text
entry mode, press the right soft key
to select Options.
You can customize each contact in your Contacts
directory by assigning ringers, pictures, and
number types, or by classifying your contacts as
Personal or Business.
5. Either save now or add more contact
information.
Assigning ringers
–
To save now, press the left soft key
select Save.
To enter additional phone numbers,
email and Web addresses, or notes,
to
1. Press the right soft key
2. Highlight a contact and press
3. Highlight the contact name and press the right
soft key to select Options.
to select Contacts.
.
–
press
down repeatedly. For help
4. Select Ringer → Assign Ringer.
5. Scroll down the list to hear the different
switching between numbers and letters for
email or Web addresses, see “Changing
modes” on page 15.
ringers and press
to select one.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Assigning pictures
Assigning number types
1. Press the right soft key
to select Contacts.
When you assign a number type, an icon is placed
in front of a contact number to specify the type of
number, such as work, home, or mobile.
2. Highlight a contact and press
3. Highlight the contact name and press the right
soft key to select Options.
.
1. Press the right soft key
2. Highlight a contact and press
3. Highlight the contact number and press the
left soft key to select Edit.
4. Press down once and press
to select Contacts.
.
4. Select Picture → Assign Picture → Images.
5. Select Saved Images or Caller IDs.
Note: With Kyocera Mobile PhoneTools, you
can transfer digital pictures to your phone. To
purchase MPT or other accessories, visit
.
5. Highlight an option to designate the number
as General, Work, Home, Mobile, Pager, or Fax
and press . The associated icon will appear
next to the number in your Contacts directory
and Recent Calls list.
6. Scroll through the list to view your options
and press
to assign it to your contact.
Classifying contacts as Personal
or Business
General
Home
Work
Mobile
1. Press the right soft key
to select Contacts.
2. Highlight a contact and press
.
Pager
Fax
3. Highlight the contact name and press the right
soft key to select Options.
6. Press the left soft key
to select Save.
4. Select Classify.
Editing a contact
1. Press the right soft key
5. Select Personal or Business and press
.
to select Contacts.
Note: To assign Personal or Business ringers, see
“Assigning business and personal ringers” on
page 29.
2. Highlight a contact and press
3. Highlight the contact name or number and
press the left soft key to select Edit.
.
4. Enter your changes and press the left soft key
to select Save.
18
Editing a contact
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Primary Number makes this number the
first one that shows up when you open
the contact.
Erasing a contact
1. Press the right soft key
to select Contacts.
2. Highlight the contact to erase and press
.
Add to Group... allows you to add the
contact to a caller group that you have
defined. For more information on caller
groups, see “Using caller groups” on
page 20.
3. Select Options.
4. Highlight Erase Contact and press
5. Press the left soft key to confirm.
.
Customizing a phone number
1. Press the right soft key
–
Add Voice Dial to record a voice tag so you
can call a contact using voice recognition
(VR). For more information, see page 37.
to select Contacts.
2. Highlight the contact to edit and press
.
–
–
Erase Voice Dial erases the voice tag
associated with the number.
3. Press
down to highlight the number.
4. Press the right soft key
to select Options.
Edit Voice Dial records a new voice tag.
5. Highlight an option and press
:
6. Enter the new information and follow
–
–
Call to call the contact.
the prompts.
Send Text Msg brings you to the text
7. Select Save, if necessary.
messaging screen.
–
–
–
–
Add Speed Dial assigns or removes the
speed dial location.
Finding contact information
To find a phone number or contact, you can (1)
check the Frequent list, (2) search the Contacts
directory, or (3) use Fast Find.
View Number to see the selected
phone number.
Erase Number erases the number from
the contact.
Checking the Frequent List
From the home screen, select Contacts. The last
15 of your most frequently called contacts appear
when the Frequent List is enabled. Scroll past the
double line to view the All Contacts list.
Secret makes the number secret so that it
will not appear on the screen until the
lock code is entered. Secret numbers can
be called without a lock code. (For more
information, see “Limiting calls” on
page 35.)
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
19
To enable the Frequent List setting
2. Press
entries.
down to scroll through matching
•
Select Menu → Settings → Convenience →
Frequent List → Enabled.
3. Highlight the name you want then press
to
call the number.
Searching the Contacts directory
1. Select Contacts for a list of all contacts.
To quickly get down the list, enter the first
letter of the contact. The menu skips to that
letter of the alphabet.
Using caller groups
Caller groups are a way to organize your contacts
into groups that can then share a common ring
tone or graphic.
- or -
Note: Your phone comes with two groups already
defined, Business and Personal.
Select Menu → Contacts.
2. Select a search method:
–
–
View All lists all saved contacts.
Creating a caller group
View Groups, Speed Dial List, Voice Dial List
selects a contact from the specified list.
1. Select Menu → Contacts → View Groups.
2. Press the left option button
to select New.
3. Highlight a contact and press
To call the contact, highlight the number
and press
.
3. Enter a name for the group.
–
–
If you need to learn how to enter letters,
.
see “Understanding text entry screens” on
page 14.
Setting Fast Find
–
To add a symbol or smiley to the contact
name, or to change the text entry mode,
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
press the right option button
select Options.
to
•
Select Menu → Settings → Convenience →
Fast Find → Enabled.
4. Press the left option button
5. Press
contacts. Press the left option button
to select Next.
Using Fast Find
down to scroll through your saved
to
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed dial
entry appears.
Add a contact to the group. A check mark
appears next to the name.
20
Using caller groups
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: To remove a checked contact from the
Note: You can assign ringtones to the Business or
Personal caller group by selecting Menu →
Settings → Sounds → Business ringtones or
Personal ringtones.
group, press the left option button
to select Remove.
again
Note: If a contact you are trying to add already
belongs to another group, an alert dialog
appears. To continue adding the contact to the
new group, select Yes. To abort, select No.
6. Press the right option button
to select
Done and save the group.
Editing a caller group
1. Select Menu → Contacts → View Groups.
2. Press
groups. When you come to the group you wish
down to scroll through the list of
to edit, press the right option button
to
select Options → Edit.
3. Follow Steps 3 through 6 under “Creating a
caller group” on page 20 to edit the group.
Assigning a ring tone to a
caller group
1. Select Menu → Contacts → View Groups.
2. Press
groups. When you come to the group you wish
to assign a ring tone to, press
down to scroll through the list of
.
3. Select Options → Ringer → Assign ringer.
4. Press
list of available ring tones. When you come to
the desired ring tone, press
up and down to scroll through the
.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
21
5
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone. For
information on voicemail messages, see “Setting
up voicemail” on page 10.
3. Add another recipient if desired:
–
Press the right soft key
to select
Options then select Recent List, Contacts,
or Group Lists.
- or -
Important: The features and menus described in
this chapter may vary depending on services
available in your area. Check with your service
provider for details and possible usage charges.
–
Enter a space or comma after the first
number then enter another
recipient manually.
Note: You can send a message to up to 10
contacts at once. The messages will be sent
one at a time, once to each addressee.
Sending text messages
You can only send text messages to phones
that are capable of receiving them or to
email addresses.
4. When you are done entering addresses,
press
twice.
5. Enter the message. To learn how to enter text,
see “Understanding text entry screens” on
page 14.
Creating a text message
1. Select Menu → Messages → New Text Msg.
2. Enter a recipient’s phone number or
- or -
email address:
Add QuickText, symbols, or emoticons in your
message. See “Including prewritten text and
symbols” for information.
–
Select Options to access your Recent List,
Contacts, or Group Lists and press
.
Select a contact and press . Highlight
the number field and press . For more
about group lists, see “Creating a caller
group” on page 20.
6. Press the left soft key
to select Send. See
“Setting sending options” for information
about how and when you want the message to
be received.
- or -
Including prewritten text and symbols
–
Enter a New Address manually. (To learn
how to enter text, see “Understanding text
entry screens” on page 14.)
During text entry, you can add QuickText,
symbols, or emoticons in your message.
22
Sending text messages
Download from Www.Somanuals.com. All Manuals Search And Download.
1. From the text entry screen, select Options.
2. Select an option and press
–
–
Save QuickText saves the message you have
just entered as a prewritten message then
returns to the message entry screen so you
can send the message.
.
–
Insert QuickText: Scroll through the list of
options and press to select one.
Settings allows you to choose from the
–
Add Symbol: Scroll through the list and
press the corresponding number key to
select it.
following after pressing
:
•
•
•
Request Receipt to request notification
when the message has been received.
–
Add Smiley: Scroll through the list and
press the corresponding number key to
select it.
Set Priority labels the message as
“Urgent.”
3. When you have finished your message, select
Send. See “Setting sending options” for
information about how and when you want the
message to be received.
Callback Number includes a callback
number with the message to let
recipients know at what number they
can call you back. Select OK to include
your own number or Edit to enter a
different callback number.
Setting sending options
When you are ready to send a message, you have
several options for how and when you want the
message to be received.
•
•
Send Later schedules a time to send
the message.
Validity Period defines the expiration
1. Once you have completed the message,
period limit for a message.
select Options:
2. When you have finished setting options, press
–
Add Address returns to the “Send To” screen
to add another recipient without losing the
message. Select Options to access your
Recent List, Contacts, or Group Lists and
the right soft key
message window.
to return to the
3. Press the left soft key
to select Send.
press . Select a contact and press
Highlight the number field and press
.
.
Adding a signature
The signature you create is included at the end of
all outgoing messages and is counted as
characters in your messages; however, it does not
appear in the message creation screen.
–
Save Message saves the message in
your Drafts folder. This prevents the
message from being deleted if you have
activated AutoErase and enables you to
send the message to others.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
23
To create a signature:
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down as
you enter characters, until it reaches 0. If you
continue to enter text after this counter reaches 0,
a message segment may be appended. When you
reach the message size limit, you are prompted to
edit the message or alerted that the message is
being appended.
1. Select Menu → Settings → Messaging →
Signature.
2. Enter your signature in the text field.
3. Select OK to save the setting.
Note: The characters in the signature are included
in the total character count of the message. See
the note under step 5 in “Creating a text message”
on page 22.
Receiving incoming calls while
creating messages
If you cannot send messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erasing
messages” on page 27.
•
If you don’t wish to answer the call, press the
right soft key to select Ignore. The phone
returns to the message screen.
•
To answer the call, press . Your message is
saved to the Drafts folder. To return to the
message, select Menu → Messages →
Drafts → Resume.
Understanding appended messages
characters remaining
capitalization setting
text entry mode
Viewing your sent messages
To save your outgoing messages, you must first
enable Save to Sent.
text entry
fields
1. Select Menu → Messages → Msg Settings →
Save to Sent.
2. Select an option and press
.
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
–
Disabled is the default setting. Outgoing
messages are not saved.
–
Prompt allows you to choose whether or
not to save your message when you send it.
Important: Your service provider will charge you
for each message segment.
24
Sending text messages
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Enabled automatically saves all
successfully sent messages in the
Sent folder.
Viewing failed or pending messages
Failed or pending messages are stored in
your OutBox.
To view successfully sent messages:
To view your OutBox:
1. Select Menu → Messages → Sent.
2. Press
1. Select Menu → Messages → OutBox. A list
up or down through the list of
of all failed or pending messages appears.
messages. One of the following symbols
appears next to each message:
2. Scroll through the list of messages and press
to read one. One of the following symbols
appears next to each message:
The scheduled message will be sent at
the scheduled time. You cannot
cancel delivery of the message.
The message is pending and will be
sent when possible. You can cancel
delivery of the message.
The scheduled message has been sent
and will be delivered as scheduled.
You cannot cancel delivery of the
message.
The message cannot be sent
because service is not available. An
alert appears on your phone if the
message cannot be sent.
The message has been received.
The message has been received and
opened. (This symbol may not be
available. Check with your service
provider.)
Retrieving text messages
When a text message is received, your screen
displays “New Messages” with the
symbol at
the top of your screen. The symbol flashes if the
message is urgent.
The message has been sent to more
than one recipient.
If you see the “New Messages” note
The message has never been sent or
has not been sent since it was last
modified. You can cancel delivery of
the message.
•
To view the message, press the left soft key
to select InBox, highlight the message, and
press the left soft key
To Ignore the message, press the right soft
key
to select View.
•
.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. You can find the
older message in the InBox:
–
–
Save as QuickText to save the text from the
message as QuickText, which you can
insert into other messages. Graphics and
sound are not saved as part of
QuickText.(For more about QuickText, see
page 27.)
•
Select Menu → Messages → InBox.
If you see the
symbol
View Sender information.
1. Select Menu → Messages → InBox. A list of all
3. Select Done.
your received messages appears.
Setting message alerts
–
indicates an “Urgent” message.
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 31.
2. Scroll through the list of messages and press
to read one.
Reading the message
Blocking unwanted messages
The options available to you may vary. Check with
your service provider.
You can block messages from particular senders
by adding their addresses to a “block list.”
1. If the text message is long, press
down to
1. Select Menu → Settings → Messaging →
view the entire message.
Block Msgs.
2. When you are finished, you can Reply to the
sender, Erase the message, Save the message
to your Saved folder, or set additional Options
for the message:
2. Do one of the following:
–
–
–
To block an address, select Block Address
and enter the address into the provided
field.
–
–
Erase the message.
To unblock an address, select Unblock
Address and enter the address into the
provided field.
Lock Msg to protect the message from
being accidentally deleted.
–
–
Forward the message.
To see a list of blocked addresses, select
Get List.
Reply with Copy to reply to the message
with a copy of the original attached.
–
Save Message to save the message.
26
Retrieving text messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing messages automatically
Erasing messages
It is a good idea to erase old messages to free up
memory in your phone.
Use this setting to have old messages
automatically erased from the InBox, Sent Msgs
folder, or both when memory is low.
You have the option of erasing text messages and
pages as you send or read them, erasing them one
at a time from the list in the OutBox or InBox, or
erasing them all at once.
•
Select Menu → Messages → Msg Settings →
Auto-Erase → Old InBox Msgs/Sent Msgs/Both.
Older messages will be erased as new
messages are received.
Erasing single messages
1. Select Menu → Messages.
2. Select the type of text message you want to
Creating and editing prewritten
messages (QuickText)
Your phone comes with prewritten (QuickText)
messages, such as “Please call me,” which you
can insert into the body of a text message. You can
edit these messages and create new ones.
erase and press
or Saved.
: InBox, OutBox, Sent,
3. Highlight the message to erase and press
.
4. Select Options.
1. Select Menu → Messages → Msg Settings →
5. Select Erase to erase the message. A
Edit QuickText.
notification appears: “Erase this message?”
2. To create a new pre-written message,
6. Select Yes to erase the message.
select New Msg.
Note: You can erase a scheduled message from
the OutBox, but you cannot cancel delivery of
the message.
- or -
To edit an existing pre-written message,
highlight the message and select Edit.
Erasing all messages
3. Enter or edit the text and press the left soft key
to select Done. For help entering text, see
“Understanding text entry screens” on
page 14.
1. Select Menu → Messages → Erase Messages.
2. Select a folder from which to erase all
messages: InBox, Sent, OutBox, Saved Folder,
Drafts Folder, or All Messages. To erase
Note: You can also save a message you have
written or received as QuickText. See “Setting
sending options” on page 23 or “Reading the
message” on page 26.
messages from all folders, select All Messages.
3. A message appears: “Erase all messages?”
Select Yes to erase messages or No to cancel.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
27
6
CUSTOMIZING YOUR PHONE
The contents of the Settings menu are as follows.
Silent Mode
Vibrate Only
Display
My Banner
Voice Features
Add Voice Dial
Network
Privacy Alert
Vibe then Ring
Lights Only
Normal Sounds
Main Menu View
Color Themes
Wallpaper
Screen Saver
Backlighting
Auto-Hyphen
Language
Time/Date Format
Contrast
Brightness
Erase Voice Dial
Voice Training
Voice Wake-Up
Voice Answer
Expert Mode
Set Phone Line
Roam/Svc Alert
Roam Option
Digital/Analog
Location
Sounds
Ringer Volume
Ringer Type
Business Ringer
Personal Ringer
Roam Ringer
Flip Open
Flip Closed
Pwr On/Off Sound
Key Volume
Messaging
Alerts
Signature
Edit QuickText
Callback Number
Text Msg Receipt
Block Msgs
Accessories
Pwr Backlighting
Headset Sounds
Auto-Answer
TTY Device
Hearing Aid
Convenience
Airplane Mode
Open to Answer
Fast Find
Save to Sent
Auto-Erase
Key Length
Key Sound
Alerts
Frequent List
Hold Call
Default Text
Voicemail Number
Smart Sound
Minute Alert
DTFM Tone
1-Touch Dialing
Web Prompt
Call Guard
Security
Lock Phone
Limit Calls
Earpiece Volume
Spkrphone Volume
New Lock Code
Erase Contacts
Emergency Numbers
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning sounds back on
Silencing all sounds
•
Select Menu → Settings → Silent Mode →
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages). You
can silence all sounds and set the phone to vibrate
or light up when you receive calls and alerts.
Normal Sounds.
- or -
Press and hold
.
Choosing ringers
Your Kyocera K132 phone has pre-programmed
ringers you can choose to use for incoming calls.
Setting the phone to vibrate or light up
1. Select Menu → Settings → Silent Mode.
2. Choose an option and press
:
1. Select Menu → Settings → Sounds →
–
Vibrate Only: The phone vibrates for the
duration of the incoming call or other
alert. appears on the home screen.
Ringer Type.
2. Scroll down the list to hear the different
ringers and press
to select one.
–
Vibe then Ring: The phone vibrates for the
first 10 seconds and then rings for the
remainder of the incoming call alert.
appears on the home screen.
Note: Downloaded ringers are added to the end of
the standard list of ringers.
Assigning business and personal
ringers
–
–
Lights Only: The phone lights up for the
duration of the incoming call or other
You can assign ringers to contacts classified as
Business or Personal in your Contacts directory.
alert.
appears on the home screen.
Normal Sounds: The phone rings for the
incoming call or alert (in effect, returns
phone to a non-silent mode).
Note: To classify a contact as Business or
Personal, see “Classifying contacts as Personal
or Business” on page 18.
1. Select Menu → Settings → Sounds.
2. Highlight Business Ringer or Personal Ringer
Note: The phone will ring when it is attached to an
external power source (such as a charger), even
if all sounds have been silenced.
and press
.
3. Select a ringer and press
.
Shortcut to Vibrate Only mode
•
Press and hold
.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Importing ringers
Adjusting volume
You can adjust the earpiece, speakerphone, and
ringer volume as well as key tones.
You can download additional ringers to your
phone using the Kyocera Mobile PhoneTools
software, if available (sold separately). To
purchase this software and other accessories, visit
Adjusting the earpiece volume
To adjust the earpiece volume manually during a
call, press the
key up or down.
Setting sounds for your phone
To set the earpiece volume:
You can set your phone to sound tones when you
open and close the flip and when you turn the
phone on and off. Sounds will not occur during
an incoming call, if you are on a call, or if a
headset or car kit is attached to your phone.
1. Select Menu → Settings → Sounds →
Earpiece Volume.
2. Press
right to increase the volume or left
to decrease the volume and select Save.
Using smart sound
Set sound when flip opens
You can set a baseline volume that the phone uses
to automatically adjust the earpiece volume when
there is a change in the amount of noise around
you or the caller’s voice.
1. Select Menu → Settings → Sounds →
Flip Open.
2. Scroll through the list to hear the sounds and
press
to select one.
•
Select Menu → Settings → Sounds →
Smart Sound → Enabled.
Set sound when flip closes
Adjusting the ringer volume
1. Select Menu → Settings → Sounds →
Flip Closed.
1. Select Menu → Settings → Sounds →
2. Scroll through the list to hear the sounds and
Ringer Volume.
press
to select one.
2. Press
right to increase the volume or left
to decrease the volume and select Save.
Set sound when phone powers on
or off
Adjusting speakerphone volume
•
Select Menu → Settings → Sounds →
Pwr On/Off Sound → Enabled.
1. Select Menu → Settings → Sounds →
Spkrphone Volume.
–
To deselect this sound, select Disabled.
30
Setting sounds for your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press
right to increase the volume or left
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
to decrease the volume and select Save.
Adjusting key tone volume
1. Select Menu → Settings → Messaging →
You can change the volume of the tones the phone
makes when you press the keys.
Alerts.
2. Select the type of alert and press
: Message
1. Select Menu → Settings → Sounds →
Alert, Page Alert, or Voicemail Alert.
Key Volume.
3. Select an option:
2. Press
right to increase the volume, or left
–
Vibrate, Beep, Freeway!, Game!, Bloop,
Winner!, and Zilofon! sets the phone to
vibrate, beep, or play a tune once when a
new message is received.
to decrease the volume and select Save.
Setting key length
You can change duration of the tones the phone
makes when you press the keys.
–
Options with Remind set the phone to notify
you once when a new message is received
and then notify you again every five minutes.
To stop a reminder alert, press the right soft
1. Select Menu → Settings → Sounds →
Key Length.
2. Choose Normal or Long and press
.
key
to select Ignore.
–
Disabled turns off message alerts.
Setting key sound
You can choose the sound the phone makes when
you press the keys.
Using shortcuts
From the home screen, press
directions to access three shortcuts and one
custom menu.
in one of four
1. Select Menu → Settings → Sounds →
Key Sound.
2. Choose Tone, Click, or Off and press
.
Up
Access your Custom Menu
Access Recent Calls
Access Messaging
Setting DTFM tone
You can turn on or off the ability for your phone
to make DTFM tones.
Down
Left
1. Select Menu → Settings → Sounds → DTMF
Tone.
Right
Record voice memo
2. Choose On or Off and press
.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
31
4. Enter your new text. See “Understanding text
Creating and updating your
custom menu
entry screens” on page 14.
5. Select Save.
You can create a custom menu that contains your
favorite features. After you set up your menu,
Choosing a menu view
simply press and hold
up to access it.
You can change the appearance of your
phone’s menus:
1. Press and hold
up to launch
Custom Menu.
1. Select Menu → Settings → Display →
2. Select Manage List.
Main Menu View.
3. Scroll through the available options and
press to select or deselect options.
2. Select an option and press
:
–
Graphic displays icons of each menu item,
You may select more than one feature. Items
appear in alphabetical order in the menu.
with its name at the bottom of the screen.
–
List displays a list of each menu item.
4. Select Save changes.
3. Press to return to the home screen. The
next time you select Menu, you will see the
menu view you selected.
Choosing a different language
Your phone may display alternative languages.
1. Select Menu → Settings → Display →
Adjusting the backlighting
Language.
Your screen lights up while you are in a call or
when you press a key on the keypad. However,
you can set the duration and brightness of
backlighting.
2. Select a language and press
.
Personalizing the screen
1. Select Menu → Settings → Display →
Changing your banner
Backlighting → Duration.
Your personal banner appears on the home
screen above the time and date and can be up to
14 characters long.
2. Select an option and press
:
–
7 seconds, 15 seconds, or 30 seconds turns
backlighting on for 7, 15, or 30 seconds
after your last keypress.
1. Select Menu → Settings → Display →
My Banner.
2. Select Edit.
3. Press
to clear the screen.
32
Personalizing the screen
Download from Www.Somanuals.com. All Manuals Search And Download.
–
7 sec. & in call, 15 sec. & in call, or 30 sec. &
in call turns backlighting on for the
duration of a call and for 7, 15, or 30
seconds after your last keypress.
Changing the display brightness
1. Select Menu → Settings → Display →
Brightness.
2. Press
left or right to adjust the brightness
Note: The “in call” settings drain the battery
more quickly.
Using Power Save Mode
and select Save.
Setting numbers to auto-hyphenate
You can conserve battery life by activating Power
Save mode. The backlighting appears for the
selected duration, but is less bright than with
Power Save off.
Auto-hyphenation (when enabled) automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
For example, 1-222-333-4444.
•
Select Menu → Settings → Display →
Backlighting → Pwr Save Mode → On.
•
Select Menu → Settings → Display →
Auto-Hyphen → Enabled.
Setting power backlighting
Selecting a screen saver
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
Screen savers appear on the home screen when
the flip is open and are activated 10 seconds after
the last keypress. Incoming calls and alerts
override screen savers.
Note: Power backlighting may not be available
with the optional desktop charger or other
accessories.
1. Select Menu → Settings → Display →
Screen Saver.
•
Select Menu → Settings → Accessories →
2. Highlight a screen saver and press . The
Pwr Backlighting → Always On.
image appears.
–
To disable this feature, select Normal.
3. Press
to assign the screen saver.
Note: The battery charges more slowly when
power backlighting is on.
4. Press to return to the home screen and
wait 10 seconds to view the selected
screen saver.
Changing the display contrast
Note: Downloaded screen savers are added to
the end of the list.
1. Select Menu → Settings → Display →
Contrast.
2. Press
left or right to adjust the contrast
and select Save.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
33
1. Select Menu → Settings → Security.
Selecting wallpaper
2. Enter your four-digit lock code.
Wallpaper appears as background on the
home screen.
3. Select New Lock Code. A message appears:
“Change Code?”
1. Select Menu → Settings → Display →
Wallpaper.
4. Select Yes and enter a new four-digit code.
2. Highlight a wallpaper design and press
.
5. Enter your new lock code again.
3. Select Assign to save your selection.
Locking your phone
Selecting a color theme
When your phone is locked, you can call only
emergency numbers or your service provider’s
number. You can still receive incoming calls.
You can select a color theme for the display
background of your phone.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
1. Select Menu → Settings → Display →
Color Themes.
2. Scroll through the options to view the color
themes and press to select one.
4. Highlight an option and press
:
–
–
Never does not lock the phone.
Choosing a different time/date format
On power up locks the phone every time
you turn it on.
1. Select Menu → Settings → Display →
Time/Date Format.
–
Now locks the phone immediately.
2. Highlight an option press
.
Unlocking the phone
Creating a secure environment
1. From the home screen, press the left soft key
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
to select Unlock.
2. Enter your four-digit lock code.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
Changing your lock code
The lock code is typically 0000 or the last 4 digits
of your phone number.
1. Select Menu → Settings → Security.
34
Creating a secure environment
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Enter your four-digit lock code.
3. Select Emergency Numbers.
4. Select an Unassigned slot.
Erasing all contacts
You can erase all entries in your
Contacts directory.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts.
5. Enter the phone number, including the area
code. Do not enter 1 before the area code.
6. Select Done.
Notes:
4. Select Yes to erase all contacts. A message
•
•
You can view these numbers only when they
are being entered for the first time.
appears: “Erase ALL Contacts?”
5. Select Yes again to erase all contacts.
To make a call to an emergency number from
a locked phone, you must dial the number
(including area code) exactly as it was stored
in Emergency Numbers.
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. If you have two
phone lines, each line will have a different phone
number.
Limiting calls
You can limit the calls that can be made from your
phone to emergency numbers, your contacts, and
service provider numbers.
Only one phone line can be used at a time.
Incoming calls made to the other line will go to
voice mail.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Limit Calls.
All contacts and settings are shared for both lines.
4. Choose an option and press
:
Note: You must first establish a second phone line
with your service provider. Once established, a
second phone number becomes available in the
menu for selection.
–
–
No Limit limits no calls.
Limit Outgoing calls only. Incoming calls
can still be received and answered.
1. Select Menu → Settings → Network →
–
Limit All limits both incoming and
outgoing calls.
Set Phone Line.
2. Select one of the two lines and press
.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Ensuring Call Privacy
Accessory Settings
You can set your phone to sound an alert if
Connecting to a TTY/TDD device
enhanced CDMA voice privacy is lost or regained
(check with your service provider to see if CDMA
voice privacy is enabled in your area). When voice
privacy is activated during a call, you will see a
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when using the phone with
message and
on your screen.
a TTY device.
To set this alert:
1. Connect the TTY device to the phone.
•
Select Menu → Settings → Network →
Privacy Alert → Enabled.
2. Enter
your keypad.
3. Select the TTY option.
from
Setting position location
4. Press
to clear the message.
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.) in
markets where service has been implemented.
5. Highlight an option and press
.
Note: TTY/TDD service may not be available.
Check with your service provider for more
information.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
Using a Hearing Aid device
You can reduce interference while using the
phone with a hearing aid device by activating the
phone's T-Coil HAC feature. Note: Enable this
feature only when using the phone with a hearing
aid device.
1. Select Menu → Settings → Network →
Location.
2. Select 911 Only or Location On.
–
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
1. Select Menu → Settings → Call Settings →
Hearing Aid.
2. Select On and then press
.
–
Location On shares your position
information with your service provider’s
network in addition to emergency
services.
36
Accessory Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7
USING VOICE RECOGNITION
Voice recognition allows you to make and answer
calls by speaking commands into the phone.
Editing a voice tag
1. Select Menu → Contacts → Voice Dial List.
2. Highlight the contact you want to edit and
Note: You cannot use voice recognition to end a
call; you must press or close the flip.
press
.
3. Highlight the phone number and select
Setting up voice dialing
To make or receive calls using voice dialing,
contacts must be saved with associated voice tags.
Options.
4. Select Add Voice Dial, Erase Voice Dial, or Edit
Voice Dial.
5. Follow the prompts.
Creating a voice tag for a contact
1. Select Menu → Settings → Voice Features →
Calling using voice tags
1. If you haven’t already done so, record a voice
Add Voice Dial.
2. Follow the voice prompts to record a name for
tag for the person you wish to call.
the contact.
2. From the home screen, press . The phone
3. Highlight an option and press
:
responds: “Say a name” or “Say ‘dial.’”
–
Add New saves a new contact to go with the
3. Say the name of the person you want to call.
voice tag.
4. If the name you said matches a contact in the
Voice Dial List, the phone responds: “Calling
(Name).” Remain silent to make the call, or
say No to cancel.
–
Add to existing adds the voice tag to a
saved contact. Select the contact, highlight
the phone number, and press the left soft
key
to Select.
5. If the phone finds multiple voice tags that
sound like the name you stated, you will be
asked to verify which name you want to call.
Say Yes when you hear the correct name. Say
No when you hear an incorrect name.
Viewing entries with voice tags
•
Select Menu → Contacts → Voice Dial List. A
list of all contacts with assigned voice
tags appears.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
37
6. When you are finished with the call,
press . You cannot end the call with a
voice command.
–
Say “Clear” to erase the last digit entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts
you with “Clear entire phone number?”,
say “Yes” to clear or “No” to cancel.
Erasing all voice tags
1. Select Menu → Settings → Voice Features →
Erase Voice Dial.
–
–
Say “Call” to dial the number.
2. Select Yes.
Say “Verify” to hear the set of
3. Select Yes again at the confirmation.
spoken digits.
–
–
Say “Cancel” to exit voice recognizer and
return to the home screen.
Calling using digit dialing
You can speak the digits of a phone number
to dial it.
Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Note: You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
Using voice features with
hands-free car kits
1. From the home screen, press . The phone
responds: “Say a name or say Dial.”
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a portable hands-free car kit
(sold separately).
2. Say “Dial.” The phone responds:
“Speak a digit.”
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
Note: The following features apply only to
portable hands-free car kits unless noted.
If you pause, the phone prompts you with the
following five options. After the prompt, speak
an option.
To shop for these accessories, visit
www.kyocera-wireless.com/store or call
800-349-4188 (U.S.A. only) or 858-882-1410.
38
Calling using digit dialing
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering using voice commands
Waking up the phone
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed Kyocera hands-free car kit.
If your phone is connected to a portable hands-
free car kit, you can use a voice command to
activate the phone to make a call.
To turn off Auto-Answer:
Note: Voice Wake-up does not work with
Keygaurd active. To disable Keygaurd, see
“Locking your phone” on page 34.
•
Select Menu → Settings → Accessories →
Auto-Answer → Disabled.
To activate the Voice Answer setting:
To activate the Voice Wake-up setting:
1. Select Menu → Settings →
•
Select Menu → Settings →
Voice Features → Voice Wake-Up →
With accessory.
Voice Features → Voice Answer → Enabled.
2. Select Menu → Settings → Silent Mode →
Normal Sounds.
To wake up the phone:
To answer a call:
1. Say Wake Up and listen for a tone.
2. Say Wake Up again until you hear two tones.
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
saved contact entry, then the phone says
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 40.
“Incoming call from (Name), answer?”
Answering the phone
•
Say Yes or press any key except
.
You can set the portable hands-free car kit to
either (1) answer automatically or (2) answer
using a voice command.
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
Answering automatically
•
•
Say No and press to silence the alert.
•
Select Menu → Settings → Accessories →
Auto-Answer → After 5 seconds.
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Note: This setting also works with the portable
hands-free car kit.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Using Expert Mode
Expert Mode allows you to use voice recognition
at a faster pace by reducing the number of voice
instructions and replacing them with tones.
Simply speak a command after the tone.
•
Select Menu → Settings → Voice Features→
Expert Mode → Expert.
Training voice recognition
If your phone is having trouble recognizing your
voice, you can train it with commands, such as
Yes, No, and Wake up.
1. Select Menu → Settings → Voice Features.
2. Select Voice Training.
3. Read the message and select OK to continue
or Cancel to return to the previous screen.
4. Select Train All or the item you want to train.
5. Follow the prompts for each word until
training is complete.
40
Training voice recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
8
USING MEDIA GALLERY
The media gallery stores and displays all the
image and sound files in the phone.
3. Highlight an image and select Options.
Note: Options vary according to phone
menu selection.
Accessing files
1. Select Menu → Media Gallery.
4. Highlight an option and press
:
–
Erase the image (image must not
2. Highlight an option and press
:
be locked).
–
Images displays a list of categories that
–
–
Set As Default sets as default setting.
contain preloaded, downloaded, saved, or
created files, such as wallpapers, screen
savers, or caller IDs.
Assign an image as a caller ID, wallpaper,
or screen saver.
–
–
–
Rename an image.
–
Sounds displays a list of categories that
contain saved or downloaded sounds,
such as ringers and voice memos.
Details gives you the file size of the image.
Erase All erases all stored images (images
must not be locked).
5. Select or
when done.
Browsing images
The Images menu allows you to assign your files
to various applications.
Browsing sounds
The Sounds menu allows you to view and listen to
all sound files stored on your phone.
1. Select Menu → Media Gallery → Images.
2. Highlight an option and press
:
1. Select Menu → Media Gallery → Sounds.
2. Highlight an option and press
–
–
–
Saved Images displays available images.
:
Wallpapers displays wallpaper selections.
–
–
–
Saved Sounds contains sounds saved on
your phone.
Screen Savers displays available
screen savers.
Ringers contains ringers saved on
your phone.
–
Caller IDs displays pictures and images that
can be assigned to saved contacts.
Voice Memos contains recorded
voice memos.
3. Highlight a sound file and select Options.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
41
4. Highlight an option and press
:
–
–
–
–
–
Erase the sound.
Assign a sound as a ringer.
Rename a ringer.
Details gives you the file size of the sound.
Erase All stored sounds.
5. Select or
when done.
Creating free space
If your phone does not have enough memory to
store a file, a dialog appears and asks you if you
want to create space.
•
Select Yes to display the file browser
(categories) with the memory needed and
available memory.
•
Select No to return to the previous screen. No
files are saved or downloaded.
The actions are limited to the following:
–
Erase the selected file (you cannot erase
locked files).
–
Done re-attempts the download or save.
42
Creating free space
Download from Www.Somanuals.com. All Manuals Search And Download.
9
USING TOOLS AND GAMES
Naming a saved voice memo
Voice Memo
The Voice Memo tool allows you to record and
play back audio memos.
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
2. Highlight the memo and select Options.
Recording a voice memo
3. Select Rename.
1. Select Menu → Tools & Games →
4. Press and hold
to clear the default name.
Voice Memo → Record New.
-or-
5. Use the keypad to enter a name for the memo.
6. Select Save.
Press and hold
right.
2. Say your memo and press the left soft key
Erasing a saved voice memo
to select Stop.
1. Select Menu → Tools & Games →
3. Select Save to save your memo.
Voice Memo → Recorded Memos.
Note: If an incoming call is received while you’re
recording a memo, the memo is saved and the
incoming call screen appears.
2. Highlight the memo and select Options.
3. Select Erase. The prompt “Erase file?”
appears.
4. Select Yes or No.
Playing or reviewing a voice memo
1. Select Menu → Tools & Games →
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
Voice Memo → Recorded Memos.
2. Highlight the voice memo to review and
select Play.
3. Press
right and left to select a function and
to perform it:
Creating an event
press
1. Select Menu → Tools & Games →
Play
Scheduler → Add New Event.
2. Enter a name for the event and press
Stop
Pause
down. For help entering text, see page 14.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
43
3. Select Options and classify the type of event
and press : Meeting, Phone Call, Birthday,
Anniversary, Vacation, Medical, or Other.
10. Press
to select whether or not this is a
recurring event.
–
Select an option and press
: No, Daily,
4. Press
to change the date of the event (the
Weekly, Monthly, or Annually.
current date is the default date of the event).
11. Select Save.
–
–
–
Press
left or right to move between the
Editing, erasing, or sending an event
month, day, and year fields.
1. Select Menu → Tools & Games →
Press
month, day, or year.
up or down to change the
Scheduler → View Month.
2. Press
up, down, left or right to highlight
Press
to save your changes.
the day with the event to view, edit, or erase
5. Press
to set the time of the event.
and press
3. Press
and press
.
–
–
–
Press
left or right to move between the
up or down to highlight the event
.
hour, minute, and AM/PM fields.
Press
minute, or AM/PM.
Press to save your changes.
up or down to change the hour,
4. Press the right soft key
5. Select Edit, Erase, or Send and press
to select Options.
.
–
For more information about editing the
6. Press
to set the duration of the event.
event, see “Scheduler” on page 43.
–
–
–
Press left or right to move between the
–
To erase the event, highlight Erase and
hour and minute fields.
Press up or down to change the hour
and minute.
Press to save your changes.
to set a reminder of the event.
press . Press the left soft key
confirm.
to
–
For more information about sending the
event, see “Sending and Receiving Text
Messages” on page 22.
7. Press
–
Select an option and press
.
Alarm Clock
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
8. Press
to set the reminder sound.
–
Select an option and press
.
9. Press
to select a Silent Mode setting
Note: The alert occurs only if the phone is on.
–
Select No or During Event and press
.
44
Alarm Clock
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select an option and press
: 5 minutes,
Setting an alarm clock
15 minutes (default), 30 minutes, or 60 minutes.
A message appears telling you the QuickAlarm
is on.
1. Select Menu → Tools & Games →
Alarm Clock.
2. Highlight one of the alarms and select Set.
4. When the alarm rings, select Off to turn off the
3. Use the phone keypad to enter numbers and
alarm or Reset to set the QuickAlarm again.
to switch between AM and PM.
–
–
–
Press
hours, minutes, and AM/PM fields.
Press up or down to change the hours,
minutes, and AM/PM options.
Press to set the time of the alarm.
left or right to move between
Tip Calculator
The Tip Calculator helps you calculate how much
tip to include with a bill.
1. Select Menu → Tools & Games →
Tip Calculator.
4. Select Options to set the alarm sound.
5. Highlight an option and press
6. Select Options to set the recurring time.
7. Highlight an option and press
8. Enter a note for the alarm and press
2. Enter the amount of your bill.
3. Select Next.
.
4. Select the amount you want to include as a tip
.
(10%, 15%, 18%, 20%, Other) and press
Your total bill appears, including tip.
.
.
9. Press the left soft key
to select Save and
5. To split the bill, press the right soft key
to
set the alarm(s).
select Split.
10. When the alarm rings, select Off to turn off the
alarm or Snooze to silence the alarm for
10 minutes.
6. Press
7. Enter the number of guests and press the left
soft key to select Next. The amount each
to clear the default of 2 guests.
Note: Opening the flip turns off the alarm.
guest pays is calculated.
8. Select Done.
Setting the QuickAlarm
1. Select Menu → Tools & Games → Alarm Clock.
2. Highlight QuickAlarm and select Set.
Calculator
Use the calculator for basic mathematical
equations.
1. Select Menu → Tools & Games → Calculator.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
45
2. Use the keypad to enter numbers.
3. Select Start to begin the countdown.
Select Stop to pause the countdown.
Select Reset to clear the timer.
3. Use
Left
to select mathematical operations:
Up
x (multiply)
÷ (divide)
+ (add)
4. Select Sound to set the alarm sound and
Right
Down
- (subtract)
press
.
4. Press
Example: Enter 5, press
enter 2, then press
to calculate the result.
5. Press
or the right soft key
to silence
left to select X,
to obtain the result of 10.
the alarm.
Stopwatch
1. Select Menu → Tools & Games → Stopwatch.
2. Select Start to begin counting.
Select Stop to stop counting.
5. Press to return to the home screen.
- or -
Press
to clear the screen.
Options
Select Reset to clear the counter.
Adds displayed digit to the value stored
in memory.
M+
World Clock
The World Clock lets you check times in cities
around the world in relation to local time.
Displays currently stored value on
screen.
MR
MC
Clears value currently stored in memory.
1. Select Menu → Tools & Games → World Clock.
The World Clock menu is displayed. Your
local time and date is on the first line,
followed by your selected world city and that
city’s time and date.
Timer
This timer counts down for a specified
amount of time. It beeps when that amount
of time has elapsed.
When you first access World Clock, you are
prompted to select a city.
1. Select Menu → Tools & Games → Timer.
2. Select Set.
2. Press
to select Cities. The Cities menu is
–
–
Press
Press
to move the cursor left or right.
up or down to set the hours,
displayed, showing 85 world cities in
alphabetical order.
minutes, and seconds.
3. Press
up or down to scroll through the
cities list. You can also use the number keys
(2-9) to alphabetically tab through the list.
46
Timer
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press
to select a city, like Athens.
b. Press Search.
The World Clock menu is displayed again,
with Athens’ time and date.
c. Countries beginning with A are displayed,
like Afghanistan, Algeria, and Australia.
From the World Clock menu, you can also select
Edit to search by city or country.
Use
to move through the list, then press
to
select a country.
1. Select Edit from the World Clock menu.
The Edit City menu is displayed.
Games
The games in this section may not be available
on your phone. Check with your service provider
for availability.
2. Select your type of search.
–
–
Press
Press
search By City.
down, then press
to search
If you receive an incoming call alert while you are
playing a game, the game is paused and exited.
You can return to play once the call alert ends.
Games do not remain paused if the phone is
turned off or loses power.
By Country.
3. If you search by City, the Search screen
is displayed.
a. Use your number keys (2-9) to enter the
letter(s) by which you want to search. For
example, press 2 once to enter the letter A.
Brick Attack
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of
the screen.
b. Press Ok.
c. Cities beginning with A are displayed, like
Anchorage, Athens, and Atlanta.
d. Use
right soft key
the city you highlighted
e. Press to select a city.
to move through the list, press the
1. Select Menu → Tools & Games → Brick Attack.
to view information on
2. Press the left soft key
to select Yes at the
prompt, “Turn off backlight to conserve
battery?”
4. If you search by Country, the Find Country
3. Press the left soft key
to select New.
screen is displayed.
–
To pause the game, press , then press
to Resume.
a. Use your number keys (2-9) to enter the
letter(s) by which you want to search. For
example, press 2 once to enter the
letter A.
–
To move the paddle, press
left or right.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
47
–
To exit the game, highlight Exit and
–
–
You lose points each time you exceed 21
in a column.
press
.
Select Skip to skip one card per round.
Race 21
5. Press
to select
to get your score and
This game is a timed variation of Black Jack.
Each game comprises three 90-second rounds.
To score points, add cards in each of the four
columns, trying to reach but not exceed 21
in each column within during the course of
the game.
advance to the next round.
6. Select an option and press
to select it.
–
New Game initiates game play. To pause the
game, press . From here you can
choose Resume, New or Quit.
–
–
–
Resume Game returns you to the game you
were last playing.
1. Select Menu → Tools & Games → Race 21.
2. Press
to select Yes at the prompt, “Turn
Scoreboard provides you with the top
five scores.
off backlight to conserve battery?”
3. Select New Game. The first card to be placed is
shown at the top left of the screen. Press a key
to add a card to the row as follows:
Music plays music with this game. Select
from Music Always, Sound Effects,
Instructions, Credits, During Title, or
No Music.
Add cards to the first row
Add cards to the second row
Add cards to the third row
Add cards to the fourth row
7. Press to end all games.
Shortcut: Press
left or right to choose
arrows at the bottom of the screen then press
to add cards to corresponding rows.
Note: Each time you place a card, a new card
appears for placement.
4. Continue placing cards until you are satisfied
with your selections.
–
You can pause or end the game at any time
by pressing
.
48
Games
Download from Www.Somanuals.com. All Manuals Search And Download.
10 CONNECTING TO THE INTERNET
–
–
A
appears in a secure session.
An underline and an arrow indicate that
there is more text. Press down to view
to return to the
Using the Mobile Web
You can use your K132 phone to browse the
Internet if you have obtained phone Internet
services from your service provider and if over-
the-air Internet access is available in your area.
more text. Press
previous screen.
–
To choose a site, highlight it and press the
left soft key to select Go.
Note: You cannot receive incoming calls while
you are using the Web Browser.
4. When you have finished using the Internet,
Starting the Web Browser
1. Select Menu → Web Browser.
- or -
press to exit the browser.
Using the Web menu options
The following options may appear on your screen:
Press and hold
left to launch the browser.
•
•
•
•
Home returns you to the main Web Browser
window or home page.
Note: A message about airtime fees appears
every time you start the browser. To cancel the
message, see “Changing the Web prompt” on
page 50. For more information about how
airtime is charged, contact your
Mark Site saves the current location as a
bookmark for easy access.
Bookmarks displays a list of your saved
Web sites.
service provider.
Setup gives you options for changing how
2. Press
to continue.
information is displayed.
If this is the first time you have connected to
the Internet, a message informs you that
security is not yet enabled for your
Web Browser.
–
–
Show URL displays the entire URL.
About Openwave displays information
about your Web Browser version.
3. Press the left soft key
to select Yes to
–
Encryption should not be used unless you
are instructed to do so by your
service provider.
enable security. When you are connected, a
browser home page appears. It has a list of
bookmarks and some Web menu options at
the bottom of the screen.
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
49
–
–
UP.Link selects a different browser server.
You can use this option if you have more
than one Web Browser account.
–
–
–
–
At Start confirms that airtime fees will be
applied when you use the browser.
At End verifies you want to exit
the browser.
Restart restarts the Web Browser.
Both prompts you when you start and exit
the browser.
Searching for a Web site
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
No Prompts does not use any prompts.
Going to a bookmarked site
1. Select Menu → Web Browser. If you see a
message prompt, press
to continue.
2. From your Web home page, select Bookmarks.
A list of bookmarks appears.
3. Enter the number corresponding to the
bookmark you want and press
.
Checking Browser alerts
Alerts received from a Web site are sent to your
Browser Alerts inbox.
1. Select Menu → Messages → Browser Alerts.
This action launches the browser inbox.
2. Press
to accept browser fees.
3. Select an alert and follow the prompts.
Changing the Web prompt
1. Select Menu → Settings → Convenience →
Web Prompt.
2. Highlight an option and press
:
50
Using the Mobile Web
Download from Www.Somanuals.com. All Manuals Search And Download.
11 GETTING HELP
Customer support
Your service provider’s customer support
India:
Toll free:1-600-121214
Toll: 0124-284-5000
department may be accessible directly from your
phone when you dial a number such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail.
Mexico:
001-866-650-5103
New Zealand: 0-800-990-100
Panama:
Peru:
001-800-201-1984
0-800-51-934
Puerto Rico:
Venezuela:
1-866-664-6443
0-800-100-2640
For questions about the phone features, refer to
the materials provided with your phone, or visit
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
•
•
•
Web site: www.kyocera-wireless.com
•
•
The name of your service provider.
Email: [email protected]
The actual error message or problem you are
experiencing.
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401. Customer support
phone numbers are also available in the
following countries.
•
•
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
Note: To locate the ESN select Menu →
Phone Info and scroll down to ESN: for the
11-digit number.
Argentina:
Australia:
Brazil:
0-800-666-0052
1-800-507-000
0-800-55-2362
800-43-1212
Qualified service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
Chile:
Colombia:
01-800-700-1546
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Phone accessories
To shop for K132 phone accessories, visit
www.kyocera-wireless.com/store. You may also call
us at 800-349-4188 (U.S.A. only) or
858-882-1410.
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including
cellular or PCS phones, visit
beta.kyocera-wireless.com.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Numerics
1-touch dialing, 10
countdown timer, 46
custom menu, 32
updating, 32
hard pause, 17
I
A
icons, 6
accessories, v, 52
alarm clock, 6, 44
alerts
messages, 25
recent calls, 9
D
digital mode, 6, 13
display contrast, 33
InBox, 26
Internet, 49
browser, 50
E
for messages, 31
for missed calls, 9
minute alert, 12
roaming, 12
emergency
L
calls, 11
language, 32
lights
emergency mode, 11
exit emergency mode, 11
position location, 6, 36
erasing
lights-only mode, 6, 29
analog mode, 6, 13
auto-hyphenation, 33
limiting calls, 35
lock code, 34
locking
B
all contacts, 35
contact entries, 19
phone numbers, 19
text messages, 27
expert mode, 40
banner, 32
battery, 1
blocking outgoing calls, 35
Brick Attack, 47
browser, 49
phone, 34
M
memory
creating free space, 42
saving, 27
menu view, 32
F
C
fast find, 20
calculator, 45
callback number, 23
caller groups, 20
calls
finding contact information, 19
frequent contacts, 19
N
Network settings, 13
Digital/Analog, 13
number mode, 14
G
games
answering, 7
ending, 7
missed, 9
Brick Attack, 47
Race 21, 48
O
OutBox, 25
H
tracking, 12
color themes, 34
contacts
groups, 20
contacts directory, 17
contrast, 33
P
hands-free car kit
answering using voice, 39
purchasing, v, 52
hands-free headset
purchasing, v, 52
phone numbers
erasing, 19
verifying your own, 2
phone, unlocking, 34
position location, 6, 36
User Guide for the Kyocera K132 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Q
text messages, 22
time format, 34
timer, 46
QuickAlarm, 45
QuickText, 23, 27
timing calls, 12
tip calculator, 45
TTY/TDD, 36
R
Race 21, 48
resetting the phone, iv
ringers
U
business and personal, 29
for contacts, 17
for roaming calls, 13
general, 29
unlocking the phone, 34
V
vibrate, 6, 29
voice answer, 39
voice dialing, 37
voice memo, 41
erasing, 43
silencing, 2
volume, 30
roaming, 6, 12
alerts, 12
naming, 43
ringer, 13
recording, 2, 43
voicemail, 10, 11
setting up, 2
volume
S
scheduler, 43
screen contrast, 33
screen icons, 6, 14, 25, 29
screen savers, 33, 41
secret contacts, 9, 19
security, 34
earpiece, 8, 30
key beep, 31
ringer, 30
W
sent messages, 24
shortcuts, 31
wallpaper, 34, 41
web browser, 49
world clock, 46
silent mode, 6, 29
smart sound, 30
smiley mode, 15
speakerphone, 8
speed dialing, 10, 19
stopwatch, 46
symbol mode, 15
T
technical support, 51
text entry, 14
quick reference, 16
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|