Korg Electronic Keyboard PS60 User Manual

About the software  
The most recent versions of the applications contained on  
the accessory disc can be downloaded from the Korg  
Please note before use  
Copyright to all software included in this product is the  
property of Korg Inc.  
The license agreement for this software is provided  
separately. You must read this license agreement before  
you install this software. Your installation of this software  
will be taken to indicate your acceptance of this  
agreement.  
USB-MIDI Setup Guide  
Operating requirements  
If the PS60 is connected to your computer via a USB cable  
or MIDI cables, performance data and sound settings can  
be transferred via MIDI between the PS60 and your  
computer.  
KORG USB-MIDI driver  
Windows  
If you install the dedicated PS60 Editor/PlugIn Editor  
application to your computer, you’ll be able to use your  
computer to edit PS60 programs in detail, and use the  
PS60 from within your host application as though it were  
a plugin.  
After you have read the About the software” and  
“Operating requirements” sections, set up your system as  
described in this guide and in the “PS60 Editor/PlugIn  
Editor User Guide.”  
Computer: USB port required (a USB host controller  
made by Intel is recommended)  
Operating system: Microsoft Windows XP Home Edition/  
Professional/x64 Edition Service Pack 3 or later  
Microsoft Windows Vista Service Pack 2 or later  
(including 64bit Edition)  
Microsoft Windows 7 (including 64bit Edition)  
Macintosh  
Computer: USB port required  
Operating system: Mac OS X 10.4.11 or later  
Making connections via USB cable  
1. Install the Korg USBMIDI driver from the included  
accessory disc.  
PS60 Editor/Plug-In Editor  
Windows:  
• Computer  
Windows: page 2, Mac: page 3  
2. If you want to use the PS60 Editor/PlugIn Editor  
with your computer, you’ll have to install it from the  
included accessory disc.  
CPU:  
Intel Pentium III / 1 GHz or better, Pentium D  
or Core Duo or better is recommended  
Memory: 512 MB or more (1 GB or more is  
recommended)  
3. Connect the PS60’s USB connector to a USB port on  
Monitor: 1,024 x 768 pixels, 16bit color or better  
A computer that satisfies the operating requirements of  
Windows XP, Windows Vista or Windows 7 and has a  
USB port  
your computer. page 4  
4. Select the necessary settings in the PS60’s Global  
mode. page 5  
5. Select the necessary settings on your computer.  
Refer to the owners manual of the software that you’re  
using. For examples of setting up the plugin editor in  
popular host applications, please refer to the “PS60  
Editor/PlugIn Editor User Guide” (page 10).  
• Operating system  
Microsoft Windows XP Home Edition/Professional  
Service Pack 3 or later, Windows Vista Service Pack 2 or  
later, and Windows 7  
However, only the standalone version will run on 64bit  
editions of Windows 7 and Windows Vista Service Pack  
2.  
Making connections via MIDI cables  
If a MIDI interface is connected to your computer, you  
can connect the PS60 to your computer via MIDI cables.  
1. Connect the PS60’s MIDI OUT and MIDI IN  
connectors to the MIDI interface’s MIDI IN and  
MIDI OUT connectors respectively. page 4  
For details on your MIDI interface, refer to its owners  
manual.  
Macintosh:  
• Computer  
CPU:  
Apple G4 800 MHz or better (Intel Mac is  
supported), G5 or Core Duo or better is  
recommended  
Memory: 512 MB or more (1 GB or more is  
Some types of MIDI interfaces (commercially  
available) may be unable to receive or transmit the  
PS60s MIDI exclusive messages.  
recommended)  
Monitor: 1,024 x 768 pixels, 32,000 colors or better  
An Apple Macintosh computer that satisfies the  
operating requirements of Mac OS X and has a USB port  
2. Make the necessary settings in the PS60’s Global  
mode.  
• Operating system  
Mac OS X version 10.4.11 or later  
3. Make the necessary settings on your computer.  
For details on the required MIDI driver and connec‐  
tions, refer to the owners manual of your MIDI inter‐  
face. You can also refer to the owners manual of the  
software you’re using.  
*
Formats supported by the PS60 PlugIn Editor:  
Windows: VST, RTAS  
Macintosh: VST, Audio Unit, RTAS  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the software  
About the PS60 and USB-MIDI driver ports  
KEYBOARD port  
Applications on your computer use this port to receive  
MIDI messages from the PS60 (data from the keyboard  
and controllers).  
SOUND port  
Applications on your computer use this port to send MIDI  
messages to the PS60s internal sound generator, making  
it produce sound.  
Installing and setting up the PS60 Editor/Plug-  
In Editor  
For details on installation, setup and using the PS60  
Editor/PlugIn Editor, please see the “PS60 Editor/PlugIn  
Editor Users Guide”.  
Allowing installation of drivers that are not  
Installation in Mac OS X  
digitally signed (Windows XP only)  
If the computer you’re using has been set to forbid the  
installation of any drivers that are not digitally signed,  
you won’t be able to install the KORG USBMIDI driver or  
the FireWire Audio/MIDI driver. Proceed as follows to  
change this setting so that you’ll be able to install the  
drivers.  
Installing the software  
You’ll need to run the installer separately for each  
software item such as the KORG USBMIDI driver and the  
PS60 Editor/PlugIn Editor to install them one at a time.  
1. Insert the included accessory disc into the CDROM  
drive of your computer.  
1. From the taskbar, click [Start][Control Panel] to  
2. On the accessory disc, doubleclick the software  
installer (.pkg) to start up the installer.  
Each installer is located in the following folder.  
• KORG USBMIDI driver  
access the control panel.  
2. In the control panel window, doubleclick [System],  
and then click the [Hardware] tab.  
3. In “Drivers,” click [Driver Signing].  
“KORG USBMIDI DRIVER” folder KORG USB‐  
MIDI DRIVER.pkg  
• PS60 Editor  
“PS60 Editor” folder PS60 Editor Installer.pkg  
3. Follow the onscreen instructions to install each item  
of software.  
If you intend to use the PS60 with the computer via the  
USB port, you’ll need to install the KORG USBMIDI  
driver on your computer.  
When the PS60 Editor/PlugIn Editor has been  
installed successfully, restart your computer. On Mac  
OS X, the standalone version and the plugin version  
are each installed in their own folder.  
About the PS60 and USB-MIDI driver ports  
KEYBOARD port  
Applications on your computer use this port to receive  
MIDI messages from the PS60 (data from the keyboard  
and controllers).  
SOUND port  
Applications on your computer use this port to send MIDI  
messages to the PS60s internal sound generator, making  
it produce sound.  
4. In the “What action do you want Windows to take?”  
area, choose [Ignore] or [Warn], and then click [OK].  
If necessary, you can change this setting back to its  
original state after you’ve installed the KORG USB‐  
MIDI driver.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If you want to apply a plugin effect to the PS60s audio  
signals, or to control the PS60s audio signals in your host  
application together with the audio data from the KORG  
Legacy Collection or other audio tracks, make the  
Connecting a computer  
connections as illustrated below. Connect the devices as  
appropriate for the host application that you’re using.  
USB connection and setup  
Note: The USB connector of the PS60 is only able to  
transmit and receive MIDI data.  
Powered  
monitors  
Before you connect the PS60 to your computer via  
USB, you must install the KORG USBMIDI driver on  
your computer. If you’re using Windows XP or  
Windows Vista, you’ll need to install the driver for  
each USB port that you use. If you connect the PS60 to  
a USB port other than the one you used when  
installing the KORG USBMIDI driver, you’ll need to  
install the driver again. For details, please see  
PS60’s audio signals  
Other audio signals  
MIDI signals  
INPUT  
INPUT  
Audio interface  
USB  
L/  
MONO  
Computer  
R
USB  
1. Using a USB cable, connect the USB connector of the  
PS60 to the USB connector of your computer.  
Powered  
monitors  
PS60  
INPUT  
INPUT  
USB cable  
Computer  
Connecting your computer via the  
MIDI connectors  
L/MONO  
R
You can use a commercially available MIDI interface to  
connect the PS60 to your computer.  
PS60  
1. Connect the PS60’s MIDI OUT connector and MIDI  
IN connector to the MIDI IN port and MIDI OUT  
port of your MIDI interface. For details, refer to the  
manual included with your MIDI interface.  
2. Make the necessary settings in the PS60’s Global  
mode.  
For details, please see “Global mode settings on the  
3. Make the necessary settings on your computer.  
For details, please see the “PS60 Editor/PlugIn Editor  
Users Guide”.  
Some USBMIDI interfaces may be unable to transmit  
or receive the PS60s MIDI exclusive messages.  
Powered  
monitors  
MIDI interface  
INPUT  
INPUT  
Using the PS60 Editor/Plug-In Editor via a USB  
MIDI OUT  
MIDI IN  
Computer  
connection  
If you want to mix the PS60s audio signals with the audio  
signals sent from your host application via your audio  
interface, or with audio signals from another sound  
module, make connections as shown below.  
AUDIO OUTPUT  
MIDI IN  
MIDI OUT  
PS60  
Powered  
monitors  
2. Adjust the necessary settings in the PS60’s Global  
mode.  
PS60’s audio signals  
Other audio signals  
MIDI signals  
For details, please see “Global mode settings on the  
INPUT  
INPUT  
Audio interface  
Audio mixer  
USB  
Computer  
L/MONO  
R
USB  
PS60  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Verifying the functionality of the PS60 Editor (stand-alone version)  
Verifying the functionality of  
the PS60 Editor (stand-alone  
version)  
Global mode settings on the  
PS60  
If the PS60 does not function correctly with your  
computer, check the following settings on the PS60 itself.  
Start up the PS60 Editor (standalone version) and verify  
that it works correctly.  
“Local Ctrl” settings  
For details on how to set up and start the PS60 PlugIn  
Editor, refer to the “PS60 Editor/PlugIn Editor Users  
Guide” on page 8.  
The MIDI software on your computer might have an Echo  
Back function where messages that are received at MIDI  
IN/USB are retransmitted without change from MIDI  
OUT/USB.  
If your MIDI softwares Echo Back is turned on when the  
PS60 is bidirectionally connected with your computer,  
the PS60s internal sound generator will receive duplicate  
messages (the internally generated messages as well as  
the messages received via echoback), which will cause  
problems such as each note being sounded twice.  
Setting up the PS60 Editor  
Before you verify that the software is operating correctly,  
make sure that you’ve completed the following steps.  
• The PS60’s USB connector is connected to your  
computer’s USB port.  
In such cases, you can solve the problem by turning the  
PS60s local control setting Off so that the signal route is  
internally disconnected inside the PS60.  
With the factory settings, the PS60s local control setting  
(“Local Ctrl”) is turned On. (“PS60 Owners Manual” on  
page 42)  
Note: When using the PS60 by itself, leave the local control  
setting (“Local Ctrl”) turned On. If this is Off, no sound  
will be produced when you play the PS60s keyboard.  
Note: The PS60 Editor/PlugIn Editor will automatically  
set the PS60s local control setting to the appropriate state  
when the software starts up.  
• The PS60 and your computer are both poweredon.  
• The Korg USBMIDI driver is installed for the USB  
port you’ll be using.  
• The PS60 Editor (standalone version) is installed on  
your computer.  
1. Start up the PS60 Editor.  
Windows  
In the taskbar, click the [Start] button and then [All  
Programs]. From the menu, choose “KORG”– “PS60”–  
“PS60 Editor” to start up the editor.  
Alternatively, you can navigate to the “KORG” folder–  
“PS60” folder, and doubleclick the “PS60 Editor.exe”  
icon located there.  
Local  
OFF  
The “KORG” folder will be in the location that you  
selected when installing the software. By default, it  
will be in the “Program Files” folder.  
Control  
Tone  
generator  
ON  
MIDI IN/USB  
Macintosh  
MIDI OUT/USB  
Navigate to the Applications” folder–“KORG” folder–  
“PS60” folder, and double click the “PS60 Editor” icon.  
• When you start up, data will be transmitted and  
received between the PS60 and the PS60 Editor. The  
PS60’s display will indicate “Now transmitting” and  
the PS60 Editor will indicate “Synchronizing...” while  
the synchronization data is exchanged.  
MIDI Filter “SysEx” setting  
With the factory settings, the PS60 is set so that it will not  
transmit or receive system exclusive messages (“SysEx”  
Off). (“PS60 Owners Manual” on page p.43)  
Since the PS60 Editor/PlugIn Editor use numerous MIDI  
system exclusive messages for communicating with the  
PS60, this setting of the PS60 will automatically be turned  
On when the software starts up.  
If you are using a MIDI device or an application other  
than the PS60 Editor/PlugIn Editor and do not want  
system exclusive messages to be transmitted and received  
between it and the PS60, you’ll need to use the PS60 to  
manually turn this setting On.  
2. To simplify the testing process, select performance A‐  
1, which uses Single settings.  
To press the PERFORMANCE BANK button on the left  
side of the PS60s panel to select bank A, and then press  
button 1 to the right.  
3. When you press one of the PS60’s timbre selector ON  
buttons, the corresponding button in the upper  
middle area of the PS60 Editor window and the  
timbre field on the left side will switch accordingly.  
In the same way as if you click the editors ON  
buttons or the fields to the left, the settings on the  
PS60 itself will switch accordingly.  
If you perform any of the following operations on the  
PS60 after the PS60 Editor/PlugIn Editor has finished  
starting up, subsequent communication will not be  
possible.  
• Turn MIDI Filter “SysEx” Off  
• On the PS60, use the “Load Preload” command with  
“All” or “Global,” and load the factoryset Global  
settings  
If the PS60 Editor/PlugIn Editor become unable to  
communicate with the PS60, please use the PS60 itself to  
turn the MIDI Filter “SysEx” setting back On.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
*
*
Apple, Mac, Macintosh and Audio Units are trademarks of  
Apple Inc., registered in the US. and other countries.  
Windows XP, Windows Vista, and Windows 7 are  
trademarks or registered trademarks of Microsoft  
Corporation in the U.S. and other counties.  
*
Intel, Intel Core, and Pentium are trademarks of Intel  
Corporation in the U.S. and other countries.  
*
*
VST is trademark of Steinberg Media Technologies GmbH.  
RTAS is registered trademarks of Avid Technology, Inc.,  
or its subsidiaries or divisions.  
*
All other product and company names are trademarks or  
registered trademarks of their respective holders.  
4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan  
© 2010 KORG INC.  
1
E
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Home Theater Server IP Media Server User Manual
Invacare Wheelchair ACC260 User Manual
Jensen Portable Speaker SMPS 85 User Manual
JVC Cassette Player KS FX922R User Manual
JVC Projector DLA RS55 User Manual
Kathrein TV Cables ESD 08 User Manual
Kenwood Webcam CMOS 200 User Manual
KitchenAid Microwave Oven 252 User Manual
KitchenAid Washer KAWE767B User Manual
Konica Minolta Printer 1800771 074B User Manual