Kodak EasyShare
CX7330 zoom digital camera
User’s guide
For interactive tutorials, www.kodak.com/go/howto
For help with your camera, www.kodak.com/go/cx7330support
Download from Www.Somanuals.com. All Manuals Search And Download.
Product features
Back View
8
9
10
11
12
7
6
13
14
5
4
1
2
3
1 Camera screen (LCD)
2 Share button
8
Ready light
9
Self Timer/Burst button
3 OK button (press)
4 4-way controller
5 DC-In (3V)
10 Flash/status button
11 Zoom (Wide Angle/Telephoto)
,for optional AC adapter 12 Grip
13 Menu button
14 Review button
6 Delete button
7 Viewfinder
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Product features
Side View
1
2
3
1
2
3
A/V Out, for television viewing
Slot for optional SD/MMC card
USB Port
Bottom View
4
1
2
3
1
2
3
4
Locator for EasyShare camera dock or printer dock
Dock connector
Tripod socket/locator for EasyShare camera dock or printer dock
Battery door
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
1
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful links.................................................................................... 42
v
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Getting started
Package contents
4
1
2
3
1 Camera with wrist strap
3 2 AA non-rechargeable starter batteries
2 Custom dock insert (for EasyShare 4 USB cable
camera dock or printer dock)
Not shown: User’s guide (may be provided on a CD), Start Here! guide,
Kodak EasyShare software CD. Contents may change without notice.
Installing the software first
IMPORTANT: Install the software from the Kodak EasyShare software CD before
connecting the camera (or dock) to the computer. Otherwise, the
software may install incorrectly. See the Start Here! guide or
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Inserting the batteries
Two AA non-rechargeable starter batteries are included with your camera. For
1 Turn the Mode dial to Off.
2 On the bottom of the camera, slide the battery
door and lift to open.
3 Insert the AA batteries as shown.
4 Close the battery door.
If you purchased an optional Kodak EasyShare
Ni-MH rechargeable battery pack (also
included with the Kodak EasyShare camera
dock or printer dock), insert it as shown.
If you purchased an optional Kodak CRV3
lithium battery (non-rechargeable), insert it as
shown.
life for the other types of batteries you can use
in your camera.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Important battery information
Kodak battery replacement types/battery life
Use the following types of batteries. Actual battery life may vary based on
usage.
CRV3 lithium battery
350 - 500
AA (2) lithium batteries
250 - 350
Ni-MH rechargeable battery
pack* (per charge)
200 - 300
AA (2) Ni-MH rechargeable
batteries (per charge)
200 - 300
AA (2) non-rechargeable
Kodak digital starter batteries
(included with camera)
150 - 250
0
500
Battery Life (Approx. number of pictures)
* Included with the Kodak EasyShare camera dock and printer dock
We do not recommend or support alkaline batteries. For acceptable
battery life, and to make sure your camera operates dependably, use the
replacement batteries listed above.
Extending battery life
■ Limit the following activities that quickly deplete battery power:
– Excessive use of the flash
■ Dirt on the battery contacts can affect battery life. Wipe the contacts with a
clean, dry cloth before inserting batteries in the camera.
■ Battery performance is reduced at temperatures below 41° F (5° C). When
using your camera in cold weather, carry spare batteries and keep them
warm. Do not discard cold batteries that do not work; when they return to
room temperature, they may be usable.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Kodak EasyShare camera dock—powers your camera, transfers pictures
to your computer, and charges the included Kodak EasyShare Ni-MH
rechargeable battery pack.
Kodak EasyShare printer dock—powers your camera, makes
4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures,
and charges the included Kodak EasyShare Ni-MH rechargeable battery pack.
Kodak 3-volt AC adapter—powers your camera.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare
camera dock or EasyShare printer dock to power your camera.
Battery safety and handling
■ Do not allow batteries to touch metal objects, including coins. Otherwise, a
battery may short circuit, discharge energy, become hot, or leak.
Turning the camera on and off
■ Turn the Mode dial from Off to any other
position.
The Ready light blinks green while the camera
performs a self-check, then stays on when the
camera is ready.
■ To turn off the camera, turn the Mode dial to
Off.
The camera completes operations that are in
process.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Changing the display
If you want to
Then do this
Turn the camera screen on or off.
Press the OK button.
that it is on whenever the camera is on.
Show/Hide the status icons when the Press
.
camera screen is off.
Setting the date and time
Setting the date & time, first time
The Date and Time have been reset message appears the first time you turn on
the camera or if the batteries are removed for an extended time.
1 SET DATE & TIME is highlighted. Press the OK button.
(Select Cancel to set the date and time at a later time.)
Setting the date & time, anytime
1 Turn on the camera. Press the Menu button.
2 Press
to highlight Setup Menu , then press the OK button.
3 Press
to highlight Date & Time
, then press the OK button.
to advance to the next
4 Press
to adjust the date and time. Press
setting.
5 When finished, press the OK button.
6 Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may let your
computer update the camera clock when you connect the camera. See the EasyShare
software Help for details.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Checking camera and picture status
The icons that appear on the camera screen indicate the active camera and
picture settings. If is displayed in the status area, press the Flash/Status
button to display additional settings.
Capture mode screen
Only the active camera settings are displayed:
Picture/video quality
Pictures/time remaining
Storage location
Flash
Self Timer/Burst
Date stamp
Album name
Digital zoom
Mode
description
Camera mode
Low battery
(flashing = exhausted)
Review screen
Print tag/number of prints
Favorite tag
Protect
Picture/video number
Email tag
Image storage
location
Review mode
Scroll arrows
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Flash/Status screen
Press the Flash/Status button. The current camera status icons are displayed in
the bottom half of the Flash screen.
Other settings
Storing pictures on an SD/MMC card
Your camera has 16 MB of internal memory. You can purchase optional
SD/MMC cards for removable, reusable storage for your pictures and videos.
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an SD/MMC card:
Notched
corner
1 Turn off the camera. Open the card door.
2 Orient the card as shown on the camera body.
3 Push the card into the slot to seat the
connector. Close the door.
4 To remove the card, turn off the camera. Push
the card in, then release it. When the card is
partially ejected, pull it out.
NOTE: When using a card for the first time, we suggest you format it before you take pictures.
Kodak products or www.kodak.com/go/cx7330accessories.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Taking pictures and videos
Taking a picture
descriptions.
The camera screen displays the mode name and description. To interrupt the
description, press any button.
2 Use the viewfinder or camera screen to frame your subject. (Press the OK
3 Press the Shutter button halfway and hold
to set the exposure and focus.
4 When the ready light turns green, continue
pressing the Shutter button completely
down to take the picture.
When the ready light blinks green, the picture is
being saved; you can still take pictures. If the
ready light is red, wait until it turns green.
Taking a video
1 Turn the Mode dial to Video
.
2 Use the viewfinder or camera screen to frame your subject.
3 Press the Shutter button completely down and release. To stop recording,
press and release the Shutter button again.
NOTE: If you prefer, press the Shutter button completely down and hold it for more than 2
seconds to begin recording. To stop recording, release the Shutter button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Camera modes
Use this mode
Auto
For
General picture-taking. Automatically sets exposure, focus,
and flash.
Sport
Night
Subjects that are in motion. Shutter speed is fast.
Night scenes or low-light conditions. Place the camera on a
flat, steady surface or use a tripod. Due to slow shutter
speeds, advise people to stay still for a few seconds after
flash fires.
Landscape Distant subjects. Flash does not fire unless you turn it on.
Landscape.
Close-up
Close subjects 5.1-27.6 in. (13-70 cm) from the lens in
Wide Angle; 8.7-27.6 in.(22-70 cm) in Telephoto. Use
available light instead of flash if possible. Use the camera
screen to frame the subject.
Video
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Using the camera screen as a viewfinder
IMPORTANT: The Liveview feature quickly depletes battery power; use it
sparingly.
1 Turn the Mode dial to any Still position.
2 Press the OK button to turn on the camera
screen.
3 Frame your subject in the camera screen.
For more about auto-focus framing marks, see
4 Press the Shutter button halfway and hold
to set the exposure and focus. When the
Framing marks
OK
framing marks change from blue to red, press
the rest of the way down to take the
picture.
5 To turn off the camera screen, press the OK
button.
To make the camera screen turn on whenever the camera is on, see Liveview,
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Using the auto-focus framing marks
When using the camera screen as a viewfinder, framing marks indicate where
the camera is focusing. For the best possible pictures, the camera attempts to
focus on foreground subjects, even if the subjects are not centered in the
scene.
NOTE: This procedure does not apply to videos.
1 Press the OK button to turn on the camera screen.
2 Press the Shutter button halfway and hold.
When the framing marks turn red, focus is accomplished.
While the shutter button is pressed halfway:
Center focus
Center wide focus
Side focus
Framing
marks
Center and side focus
Left and right focus
3 Press the Shutter button the rest of the way down to take the picture.
4 If the camera is not focusing on the desired subject (or if the framing marks
disappear and the Ready light blinks red), release your finger, recompose
the scene, and go to Step 2.
NOTE: Framing marks appear only when the camera screen is on.
Framing marks do not appear in Landscape mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Reviewing the picture or video just taken
After you take a picture or video, the camera screen displays a Quickview for
approximately 5 seconds. While the picture or video is displayed, you can:
■ Review: If you take no action, the
Delete
picture/video is saved.
■ Play (video): Press the OK button to play the
video. (If the camera is connected to a
television, press
to adjust the volume.
■ Share: Press the Share button to tag a
picture/video for email or as a favorite, or to
■ Delete: Press the Delete button while the
OK Share
picture/video and are displayed.
displayed during Quickview. If you select Delete, all
pictures in the burst series are deleted. To delete
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Using optical zoom
Use optical zoom to get up to 3X closer to your subject. Optical zoom is
effective when the lens is no closer than 23.6 in. (60 cm) to the subject or 5.1
in. (13 cm) in Close-up mode. You can change optical zoom before (but not
during) video recording.
1 Use the viewfinder or camera screen to frame
your subject.
2 Press Telephoto (T) to zoom in. Press Wide
Angle (W) to zoom out.
3 Press the Shutter button halfway and hold to set the exposure and
focus, then press the rest of the way down to take the picture. (When
taking videos, press and release the Shutter button.)
Using digital zoom
Use digital zoom in any Still mode to get an additional 3.3X magnification
beyond optical zoom. Combined zoom settings are from 3.3X to 10X in 0.3
increments. You must turn on the camera screen to activate digital zoom.
1 If the camera screen is off, press the OK button to turn it on.
2 Press the Telephoto (T) button to the optical zoom limit (3X). Release the
button, then press it again.
The camera screen displays the zoomed image, the zoom value, and the digital
zoom icon.
3 Press the Shutter button halfway and hold to set the exposure and
focus, then press the rest of the way down to take the picture.
NOTE: You cannot use digital zoom for video recording.
IMPORTANT: You may notice a decrease in printed image quality when using
digital zoom.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy
shadows. You can change the flash setting in any Still mode; the default flash
setting is restored when you exit the mode or turn off the camera.
Flash Range
WideAngle 2-11.8 ft (0.6-3.6 m)
Telephoto 2-6.9 ft (0.6-2.1 m)
Turning on the flash
Press the
button to scroll
Flash/status button
through the flash options.
The active flash icon is displayed
in the camera screen status area.
Flash Mode
Flash Fires
Auto
When the lighting conditions require it.
Off
Never
Fill
Every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is “backlit”
(when the sun is behind the subject). In low light, hold the
camera steady, or use a tripod.
Red-eye Once, so the subject’s eyes become accustomed to the flash,
then fires again when the picture is taken. (If the lighting
conditions require flash but do not require Red-eye reduction,
the flash may fire only once.)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Flash settings in each mode
For the best possible pictures, flash settings are preset for each capture mode.
Icon
Capture
mode
Default Available flash
To return to the
default flash setting:
flash
settings
setting
(press the Flash button
to change)
Auto
Auto*
Auto
Auto, Flash Off, Fill
Flash, Red-eye
Exit the mode or turn off
the camera.
Sport
Night
Auto*
Landscape Off
Close-up Off
Video
Burst
Off
Off
None
Flash cannot be turned
on.
* When you change to Red-eye in these modes, it remains until you change it.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Putting yourself in the picture
The Self Timer creates a 10-second delay between the time you press the
Shutter button and the time the picture is taken.
1 Place the camera on a flat surface or tripod.
2 In any Still mode, press the Self Timer button
.
The Self Timer icon
appears in the status area.
3 Compose the scene. Then press the Shutter button halfway and hold to
set the exposure and focus, then press the rest of the way down. Move
so that you are in the scene.
The Self Timer light blinks slowly for 8 seconds (then quickly for 2 seconds)
before the picture is taken. The Self Timer turns off after you take the picture or
if you change modes.
To cancel the Self Timer before the picture is taken, press the Self Timer
button. (The Self Timer setting remains active.)
To turn off the Self Timer, press the Self Timer button twice.
Putting yourself in the video
1 Place the camera on a flat surface or tripod.
2 Turn the Mode dial to Video , then press the Self Timer button
3 Press to choose a video length, then press the OK button.
.
4 Compose the scene, then press the Shutter button completely down. Move
so that you are in the scene.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Taking a burst series of pictures
Burst lets you to take up to 3 pictures in quick succession (approximately 3
frames per second). Burst is ideal for capturing sporting events or objects in
motion. Flash and Self Timer are disabled when you use Burst.
Turn on burst
In any Still mode, press the Self Timer/Burst
button twice.
Burst
Icon
Burst
button
The Burst icon
appears in the status area.
NOTE: The setting remains until you change it or turn off the
camera.
Take the burst pictures
1 Press the Shutter button halfway and hold to set the auto-focus and
exposure for all the pictures in the sequence.
2 Press the Shutter button the rest of the way down and hold it to take
the pictures.
The camera takes up to 3 pictures in quick succession. It stops taking pictures
when you release the Shutter button, when 3 pictures are taken, or when there
is no more storage space.
Exposure, focus, white balance, and orientation are set for the first picture and
applied to all pictures.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Changing picture-taking settings
You can change settings to get the best results from your camera:
1 Press the Menu button. (Some settings are unavailable in some modes.)
2 Press
button.
to highlight the setting you wish to change, then press the OK
3 Choose an option, then press the OK button.
4 Press the Menu button to exit.
Setting
Icon
Options
Image Storage
Choose a storage location for
pictures and videos.
Auto (default)—the camera uses the card
if one is in the camera. If not, the camera
uses internal memory.
Internal Memory—the camera always
uses internal memory, even if a card is
installed.
This setting remains until you
change it.
Exposure Compensation
(Still mode)
If pictures are too light, decrease the value.
If pictures are too dark, increase the value.
Unavailable in Video mode.
Choose how much light
enters the camera.
This setting remains until you
turn the Mode dial or turn off
the camera.
Picture Quality
Choose a picture resolution.
Best
—3.1 M pixels; for printing up to
11 x 14 in. (28 x 36 cm).
Best (3:2)
—2.8 M pixels; ideal for
This setting remains until you
change it.
printing 4 x 6 in. (10 x 15 cm) prints on the
Kodak EasyShare printer dock and other
printing solutions. Also for printing up to 11
x 14 in. (28 x 36 cm).
Better —2.1 M pixels; for printing up to
8 x 10 in. (20 x 25 cm).
Good —1.1 M pixels; for emailing,
Internet, screen display, or for conserving
space.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Setting
Icon
Options
Color Mode
Color (default)—for color pictures.
Choose color tones.
Black & White—for black-and-white
pictures.
This setting remains until you
turn the Mode dial or turn off
the camera.
Sepia—for pictures with a reddish-brown,
antique look.
NOTE: EasyShare software also lets you change a
color picture to black-and-white or sepia.
Unavailable in Video mode.
Set Album
On or Off.
Choose Album names.
Pre-select album names before you take
pictures or videos. Then, all the pictures or
videos you take are tagged with those album
Date Stamp
Imprint the date on pictures.
Choose a date option, or turn off the feature.
(Default is off.)
Orientation Sensor
On (default)
Off
Orient pictures so that they
are displayed with the correct
side up.
Setup Menu
Choose additional settings.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Customizing your camera
Use Setup to customize your camera settings.
1 In any mode, press the Menu button.
2 Press
to highlight Setup Menu
, then press the OK button.
3 Press
to highlight the setting you wish to change, then press the OK
button.
4 Choose an option, then press the OK button.
5 Press the Menu button to exit.
Setting
Icon Options
Return to previous menu.
Default Print Quantity
Choose the default quantity.
Quickview
On
Briefly display a picture after it is taken.
Off (default)
Liveview
On
Change Liveview default to on or off.
Off (default)
Advanced Digital Zoom
Choose how digital zoom turns on.
Continuous—digital zoom turns
on after the Telephoto button is
pressed to the optical zoom limit
and held.
Pause (default)—digital zoom
turns on after the Telephoto button
is pressed to the optical zoom limit,
released, then pressed again.
None—disables digital zoom.
Date & Time
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Setting
Icon Options
NTSC (default)—used in North
Video Out
America and Japan; most common
format.
PAL—used in Europe and China.
Choose the regional setting that lets you
connect the camera to a television or
other external device.
Language
Choose a language.
Format
Memory Card—deletes
everything on the card; formats the
card.
CAUTION:
Cancel (default)—exits without
making a change.
Internal Memory—deletes
everything in internal memory
including email addresses, and
album names; formats the internal
memory.
Formatting deletes all
pictures and videos,
including those that
are protected.
Removing a card
during formatting may
damage the card.
About
View camera information.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures and videos
Pre-tagging for album names
Use the Set Album (Still or Video) feature to pre-select album names before
you take pictures or videos. Then, all the pictures or videos you take are
tagged with those album names.
First—on your computer
names on your computer. Then copy up to 32 album names to the album
name list the next time you connect the camera to the computer. See Kodak
EasyShare software Help for details.
Second—on your camera
1 In any mode, press the Menu button.
2 Press
to highlight Set Album
, then press the OK button.
3 Press
to highlight an album name, then press the OK button. Repeat
to select more than one album name.
Selected albums are noted with a check mark.
4 To remove a selection, highlight an album name and press the OK button.
To remove all album selections, select Clear All.
5 Highlight Exit, then press the OK button.
Your selections are saved. If you turn on the camera screen, your album
selection is displayed on the screen. A plus (+) after the album name means
more than one album is selected.
6 Press the Menu button to exit the menu.
Third—transfer to your computer
When you transfer the tagged pictures or videos to your computer, Kodak
EasyShare software opens and categorizes your pictures in the appropriate
album. See the Kodak EasyShare software Help for details.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Reviewing pictures and
videos
Press the Review button to view and work with your pictures and videos. To
save battery power, use the optional Kodak EasyShare camera or printer dock,
Viewing single pictures and videos
1 Press the Review button.
2 Press
to scroll backward or forward through pictures and videos. (For
.)
fast scrolling, press and hold
3 Press the Review button to exit Review.
NOTE: Pictures taken at the Best (3:2) quality setting are displayed at a 3:2 aspect ratio with a
black bar at the top of the screen.
Viewing multiple pictures and videos
1 Press the Review button.
2 Press
.
NOTE: You can also press the Menu button, highlight
, then press the OK button.
Thumbnails of pictures and videos are displayed.
To display the previous or next row of thumbnails, press
To scroll through the thumbnails one at a time, press
.
.
To display a single view of the selected picture, press the OK button.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing pictures and videos
Playing a video
1 Press the Review button.
2 Press
to locate a video. (In Multi-up view, highlight a video, then
press the OK button. When a video is highlighted in Multi-up view, the
video duration is displayed at the top of the camera screen.)
3 To play or pause a video, press the OK button. (If the camera is connected
to a television, press
To adjust the volume, press
.
To rewind the video, press during playback.
To replay the video, press the OK button.
To go to the previous or next picture or video, press
.
Deleting pictures and videos
1 Press the Review button.
2 Press
to locate a picture or video (or highlight one in multiple view),
then press the Delete button.
3 Press
to highlight an option, then press the OK button:
PICTURE or VIDEO—deletes the displayed picture or video.
EXIT—exits the Delete screen.
ALL—deletes all pictures and videos from your current storage location.
To delete more pictures and videos, go to Step 2.
NOTE: You cannot delete protected pictures and videos this way. Remove protection before
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing pictures and videos
Changing optional review settings
In Review mode, press the Menu button to access optional review settings.
Video Date Display
(Display Date/Time at the start of
video playback.)
Magnifying pictures
1 Press the Review button, then locate a picture.
2 To magnify at 2X, press the OK button. To magnify at 4X, press the OK
button again. To see different parts of the picture, press
. To
redisplay the picture at the 1X (original) size, press the OK button again.
To exit Magnify, press the Menu button.
To exit Review mode, press the Review button.
NOTE: You can also press the Menu button, highlight
, then press the OK button.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing pictures and videos
Protecting pictures and videos from deletion
1 Press the Review button, then locate the picture or video.
2 Press the Menu button.
3 Press
to highlight Protect , then press the OK button.
The picture or video is protected and cannot be deleted. The Protect icon
appears with the protected picture or video.
4 To remove protection, press the OK button again.
5 Press the Menu button to exit the menu.
CAUTION:
Formatting internal memory or an SD/MMC card deletes all
(including protected) pictures, videos. (Formatting internal
memory also deletes email addresses and album names. To
restore them, see EasyShare software Help.)
Tagging pictures/videos for albums
Use the Album feature in Review mode to tag the pictures and videos in your
camera with album names.
First—on your computer
Use Kodak EasyShare software (V 3.0 or higher) to create album names on
your computer, then copy up to 32 album names to the camera’s internal
memory. See Kodak EasyShare software Help for details.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing pictures and videos
Second—on your camera
1 Press the Review button, then locate the picture or video.
2 Press the Menu button.
3 Press
to highlight Album
to highlight an album folder, then press the OK button.
to scroll through the
, then press the OK button.
4 Press
To add other pictures to the same album, press
pictures. When the picture you want is displayed, press the OK button.
To add the pictures to more than one album, repeat step 4 for each album.
The album name appears with the picture. A plus (+) after the album name
means the picture was added to more than one album.
To remove a selection, highlight an album name and press the OK button. To
remove all album selections, select Clear All.
Third—transfer to your computer
When you transfer the tagged pictures and videos to your computer, the
Kodak EasyShare software opens and categorizes your pictures and videos in
the appropriate album folder. See Kodak EasyShare software Help for details.
Running a slide show
Use the Slide Show to display your pictures and videos on the camera screen.
save battery power, use an optional Kodak 3V AC adapter. (Visit
Starting the slide show
1 Press the Review button, then press the Menu button.
2 Press
to highlight Slide Show
, then press the OK button.
3 Press
to highlight Begin Show, then press the OK button.
Each picture and video is displayed once, in the order in which you took them.
To interrupt the Slide Show, press the OK button.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing pictures and videos
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can
increase the display interval up to 60 seconds.
1 On the Slide Show menu, press
to highlight Interval, then press the
OK button.
2 Select a display interval.
To scroll through the seconds quickly, press and hold
3 Press the OK button.
.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press
to highlight Loop, then press the OK
button.
2 Press
to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted.
Displaying pictures and videos on a television
You can use an optional audio/video cable to display pictures and videos on a
television, computer monitor, or any device equipped with a video input.
(Image quality on a television screen may not be as good as on a computer
monitor or when printed.)
stops if you connect or disconnect the cable while the slide show is running.
1 Connect the optional audio/video cable from the camera video-out port to
the television video-in port (yellow) and audio-in port (white). See your
television user’s guide for details.
2 Review pictures and videos on the television.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing pictures and videos
Copying pictures and videos
You can copy pictures and videos from a card to internal memory or from
internal memory to a card.
Before you copy, make sure that:
■ A card is inserted in the camera.
■ The camera’s picture storage location is set to the location from which you
Copy pictures or videos:
1 Press the Review button, then locate the picture or video.
2 Press the Menu button.
3 Press
to highlight Copy
, then press the OK button.
4 Press
to highlight an option:
PICTURE or VIDEO—copies the current picture or video.
EXIT—returns to the Review menu.
ALL—copies all pictures and videos from your selected storage location to
the other location.
5 Press the OK button.
NOTE:
■ Pictures and videos are copied, not moved. To remove pictures and
videos from the original location after they are copied, delete them
■ Tags that you applied for print, email, and favorites are not copied.
Protection settings are not copied. To apply protection to a picture or
Viewing picture/video information
1 Press the Review button, then press the Menu button.
2 Press
button.
to highlight Picture/Video Info
, then press the OK
3 To view information on the next or previous picture or video, press
.
Press the Menu button to exit the menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Installing the software
Minimum system requirements
Windows OS-based computers
Macintosh computers
■ Windows 98, 98SE, ME, 2000 SP1, or ■ Power Mac G3, G4, G5, G4 Cube,
XP OS
iMac; PowerBook G3, G4; or iBook
computers
■ Internet Explorer 5.01 or higher
■ 233 MHz processor or greater
■ Mac OS X version10.2.3, 10.3
■ Safari 1.0 or higher
■ 64 MB RAM (128 MB RAM for
Windows XP OS)
■ 128 MB RAM
■ 200 MB hard disk space available
■ CD-ROM drive
■ 200 MB hard disk space available
■ CD-ROM drive
■ Available USB port
■ Available USB port
■ Color monitor, 800 x 600 pixels (16-bit ■ Color monitor, 1024 x 768 pixels
or 24-bit recommended)
(thousands or millions of colors
recommended)
NOTE: Mac OS 8.6 and 9.x do not support the Share button functions. Mac OS X version 10.2.x
or 10.3 is recommended for full functionality. To download EasyShare software for Mac OS
8.6 and 9.x, visit www.kodak.com/go/cx7330downloads.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the software
Install the software
CAUTION:
Install Kodak EasyShare software
before connecting the camera or
optional dock to the computer.
Failure to do so may cause the
software to install incorrectly.
1 Close all software applications that are open on your computer (including
anti-virus software).
2 Place the Kodak EasyShare software CD into the CD-ROM drive.
3 Install the software:
Windows OS-based computer—if the install window does not appear,
choose Run from the Start menu and type d:\setup.exe where d is the
drive letter that contains the CD.
Mac OS X—double-click the CD icon on the desktop, then click the Install
icon.
4 Follow the on-screen instructions to install the software.
Windows OS-based computer—select Complete to automatically install
the most commonly used applications. Select Custom to choose the
applications you wish to install.
Mac OS X—follow the on-screen instructions.
This lets you receive information regarding software updates and registers some of the
5 Restart the computer. If you turned off anti-virus software, turn it back on.
See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare
software CD, click the Help button in the Kodak EasyShare software.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Sharing pictures and
videos
Press the Share button to
“tag” your pictures and videos.
When they are transferred to your
computer, you can share them by:
Pictures Videos
✔
✔
✔
✔
✔
NOTE: Tags remain until removed. If a tagged picture/video is copied, the tag is not copied. In a
burst series, only the last picture is tagged during Quickview.
When can I tag my pictures and videos?
Press the Share button to tag pictures/videos:
■ Any time (The most recent picture/video taken is displayed.)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing pictures and videos
Tagging pictures for printing
1 Press the Share button. Press
to locate a picture.
, then press the OK button.*
to select the number of copies (0-99). Zero removes the tag
2 Press
to highlight Print
3 Press
for that picture.
The Print icon
appears in the status area.
4 Optional: You can apply a print quantity to other pictures. Press
to
locate a picture. Keep the print quantity as is, or press to change it.
Repeat this step until the desired print quantity is applied to the pictures.
5 Press the OK button. Then press the Share button to exit the menu.
* To tag all pictures in the storage location, highlight Print All, press the OK
button, then indicate the number of copies as described above. Print All is not
available in Quickview.
To remove the print tagging for all pictures in the storage location, highlight
Cancel Prints, then press the OK button. Cancel Prints is not available in
Quickview.
Printing tagged pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software print screen opens. See Kodak EasyShare software Help for details.
For more information on printing from your computer, printer dock, or card,
NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to the Best (3:2) print quality
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing pictures and videos
Tagging pictures and videos for emailing
First—on your computer
Use Kodak EasyShare software to create an email address book on your
computer. Then, copy up to 32 email addresses to the camera’s internal
memory. See Kodak EasyShare software Help for details.
Second—tag pictures/videos on your camera
1 Press the Share button. Press
to locate a picture/video.
2 Press
to highlight Email
, then press the OK button.
The Email icon
appears in the status area.
3 Press
to highlight an email address, then press the OK button.
to scroll
To tag other pictures/videos with the same address, press
through them. When the picture you want is displayed, press OK.
To send the pictures/videos to more than one address, repeat step 3 for
each address.
Selected addresses are checked.
4 To remove a selection, highlight a checked address and press the OK
button. To remove all email selections, highlight Clear All.
5 Press
to highlight Exit, then press the OK button.
The email icon
appears in the status area.
6 Press the Share button to exit the menu.
Third—transfer and email
When you transfer the tagged pictures/videos to your computer, the email
screen opens and lets you send them to the addresses you specified. See
Kodak EasyShare software Help for details.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing pictures and videos
Tagging pictures and videos as favorites
1 Press the Share button. Press
to locate a
picture/video.
2 Press
to highlight Favorite , then
press the OK button.
The Favorite icon
appears in the status area.
3 To remove the tag, press the OK button again.
4 Press the Share button to exit the menu.
Using favorites on your computer
When you transfer Favorite pictures and videos to your computer, you can use
Kodak EasyShare software to retrieve, organize, and label them by subject,
date, event, or any category you choose.
See Kodak EasyShare software Help for details.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Transferring and printing
pictures
CAUTION:
Install Kodak EasyShare software before connecting the
camera or optional dock to the computer. Failure to do so
may cause the software to install incorrectly.
Transferring pictures with the USB cable
1 Turn off the camera.
2 Plug the labeled end of the USB cable into
the labeled USB port on your computer. See
your computer user’s guide for details.
3 Plug the other end of the USB cable into the
labeled USB port on the camera.
4 Turn on the camera.
Kodak EasyShare software opens on your
computer. The software prompts you through
the transfer process.
You can also use a Kodak multi-card reader or Kodak SD multimedia card reader-writer to
transfer your pictures.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■ Kodak EasyShare camera dock, Kodak EasyShare printer dock
■ Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring and printing pictures
Printing pictures from your computer
For details on printing pictures from your computer, click the Help button in
the Kodak EasyShare software.
Ordering prints online
the many online print services offered in the Kodak EasyShare software. You
can easily:
■ Upload your pictures.
■ Edit, enhance, and add borders to your pictures.
■ Store pictures, and share them with family and friends.
■ Order high-quality prints, photo greeting cards, frames, and albums—and
have them delivered to your door.
Printing from an optional SD/MMC card
■ Automatically print tagged pictures when you insert your card into a printer
with an SD/MMC slot. See your printer user’s guide for details.
■ Make prints at an SD/MMC-capable Kodak picture maker. (Contact a
■ Take the card to your local photo retailer for professional printing.
Printing without a computer
Dock your camera to the Kodak EasyShare printer dock and print
directly—with or without a computer. Purchase this and other accessories at a
37
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
When you have questions about your camera, start here. Additional technical
information is available in the ReadMe file located on the Kodak EasyShare
software CD. For updates to Troubleshooting information, see
Camera problems
If...
Try one or more of the following
The camera does not ■ Remove, then reinsert the batteries.
turn on
■ Insert new or charged batteries.
The camera does not
turn off and the lens
does not retract
■ Place the camera on a Kodak EasyShare camera or printer
dock (sold separately), then try again.
■ Connect the camera to a Kodak 3-volt AC adapter (sold
separately), then try again.
Camera buttons and
controls do not
function
The camera screen
does not turn on
■ In any capture mode, press the OK button.
■ Turn the camera off, then on again.
To change the camera screen setting so that it is on whenever
In Review, a blue or ■ Transfer the picture to the computer.
black screen is
displayed instead of a
picture
■ Transfer all pictures to the computer.
The pictures
■ Continue taking pictures. The camera is operating
normally.
remaining number
does not decrease
after taking a picture
(The camera estimates the number of pictures remaining after
each picture is taken, based on picture quality and content.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If...
Try one or more of the following
You cannot take a
picture
■ Turn the camera off, then on again.
■ Wait until the ready light is green before attempting to
take another picture.
not accurate
Flash does not fire
Battery life is short
inserting batteries in the camera.
Computer/connectivity problems
If...
Try one or more of the following
The computer does
notcommunicatewith
the camera
■ Turn on the camera.
■ Make sure USB cable is securely connected on camera (or
Slide Show does not ■ Adjust the camera Video Out setting (NTSC or PAL,
page 21).
run on an external
video device
■ Make sure the external device settings are correct (see the
device’s user’s guide).
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Picture quality problems
If...
Try one or more of the following
The picture is too
dark or
not behind the subject.
underexposed
■ Move so that the distance between you and the subject is
■ To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
The picture is too
light
■ Move so that the distance between you and the subject is
■ To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
The picture is not
clear
■ To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■ Make sure camera is not in Close-up mode if you are more
than 27.6 in (70 cm) from your subject.
■ Place the camera on a flat, steady surface or use a tripod.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Camera ready light status
Status
Cause
Ready light glows
steady green.
Camera is ready to take a picture or video.
Shutter button is pressed halfway down. Focus and exposure
are set.
Ready light blinks
green.
Picture is being processed and saved to the camera.
Ready light blinks
orange.
Flash is not charged. Wait. Resume picture taking when the
light stops blinking and turns green.
Ready light glows
steady red.
Camera’s internal memory or card is full.
Camera processing memory is full. Wait. Resume picture
taking when the light turns green.
Card is read-only. Change storage location to internal memory
Memory card speed is slow. Card cannot be used to take
videos.
this card to take pictures only.
Ready light blinks
Batteries are low or exhausted. Replace or recharge the
off.
Still having problems?
41
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Getting help
Helpful links
Help with your camera
Help with Windows operating system
and working with digital pictures
Download the latest camera software
and firmware
Optimize your printer for truer, more
vibrant colors
Get support for cameras, software,
accessories, more
Purchase camera accessories
Register your camera
View online tutorials
Software help
Click the Help button in the Kodak EasyShare software.
Telephone customer support
If you have questions concerning the operation of the software or camera, you
may speak with a customer support representative.
Before you call
Have the camera, camera dock, or printer dock connected to your computer.
Be at your computer, and have the following information available:
■ Computer model
■ Amount of free hard disk space
■ Operating system
■ Camera serial number
■ Processor type and speed (MHz) ■ Version of Kodak EasyShare software
■ Amount of memory (MB) ■ Exact error message you received
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
Australia
Austria
Belgium
Brazil
1800 147 701
0179 567 357
02 713 14 45
0800 150000
1 800 465 6325
800 820 6027
3 848 71 30
Netherlands
New Zealand
Norway
020 346 9372
0800 440 786
23 16 21 33
Philippines
Portugal
Singapore
Spain
1 800 1 888 9600
021 415 4125
800 6363 036
91 749 76 53
08 587 704 21
01 838 53 51
0800 096 868
001 800 631 0017
0870 243 0270
1 800 235 6325
Canada
China
Denmark
Ireland
Finland
France
01 407 3054
Sweden
0800 1 17056
01 55 1740 77
069 5007 0035
00800 441 25605
800 901 514
Switzerland
Taiwan
Germany
Greece
Hong Kong
India
Thailand
UK
United States
91 22 617 5823
Outside the United 585 726 7260
States
Italy
02 696 33452
03 5644 5050
00798 631 0024
International Toll +44 131 458 6714
Line
Japan
Korea
International Toll +44 131 458 6962
Fax
For the most up-to-date listings, visit:
43
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Appendix
Camera specifications
Kodak EasyShare CX7330 zoom digital camera
CCD
1/2.7 in. CCD; 4:3 aspect ratio; RGB Bayer CFA; 3.3 M pixels
(effective)
Output image size Best: 2032 x 1524 (3.1 M) pixels
(image quality
mode)
Best (3:2): 2032 x 1354 (2.8 M) pixels
Better: 1656 x 1242 (2.1 M) pixels
Good: 1200 x 900 (1.1 M) pixels
Display
Color display
Viewfinder
Preview
1.6 in. (4 cm) color hybrid LCD, 312 x 230 (72 K) pixels
Real-image, optical viewfinder field-of-view: 85% (@ wide, tele)
Frame rate: 24 fps
Lens
Taking lens
3X optical zoom lens, 37-111 mm; f/2.7-f/4.6 (35 mm film
camera equivalent)
Focus system
Digital zoom
Auto focusing, TTL-AF. Working range:
23.6 in. (60 cm) - infinity @ standard
5.1-27.6 in. (13-70 cm) @ wide/close-up
8.7-27.6 in. (22-70 cm) @ tele/close-up
1-3.3X with 0.3 step
Not supported for movie capture
Lens barrier
Yes
Exposure
Exposure metering Multi-pattern TTL-AE
Exposure range AE range: EV 5.0 to 15.3 (f/2.73, ISO 200-f/5.17, 1/1400 sec.,
ISO 100) @ wide
Full range: EV 1.0 to 16.7 (f/2.8, 16 sec.,-f/8, 1/1700 sec.) @
wide
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Kodak EasyShare CX7330 zoom digital camera
Exposure mode
Programmed AE mode: Auto, Sports, Night Shot, Landscape,
Macro
Exposure Compensation: +2.0EV with 0.5EV step
Shutter speed
ISO speed
2-aperture shutter, 1/2 - 1/1400 sec.
Auto, 100-200
Flash
Electronic flash
Working range @ ISO 140:
2 - 11.8 ft (0.6 - 3.6 m) @ Wide
2 - 6.9 ft (0.6 - 2.1 m) @ Tele
Flash modes
Capture
Auto, Fill, Red-eye, Off
Capture modes
Burst mode
Auto, Sport, Night, Landscape, Close-up, Video, Burst
Maximum 3 pictures, 3.0 fps
Still image buffer
Video capture
16 MB internal memory
Image size: QVGA (320 x 240)
Frame rate: 15 fps
Image file format Still: EXIF 2.2 (JPEG compression), file organization DCF
Video: QuickTime; CODEC H.263 (video), G.711 (audio)
Image storage
Optional MMC or SD Card
of the SD Card Association.)
(The SD logo is a trademark
Internal storage
capacity
16 MB internal memory
Review
Quickview
Video output
Power
Yes
NTSC or PAL
Kodak Max digital camera batteries 2-AA; 2-AA lithium; 2-AA Ni-MH; CRV3; Ni-MH
rechargeable battery pack; 3V DC adapter, optional
Communication with computer
USB 2.0 (PIMA 15740 protocol), via USB cable, EasyShare camera dock, or printer dock
Languages
English, French, German, Spanish, Italian, Brazilian, Portuguese,
Korean, Chinese, Japanese
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Kodak EasyShare CX7330 zoom digital camera
Other features
Self timer
10 seconds
White balance
Auto sleep mode
Color modes
Date stamp
Tripod mount
Size
Auto
8 minutes
Color, black & white, sepia
None, YYYYMMDD, MMDDYYYY, DDMMYYYY
1/4 in. (6.35 mm)
4 in. (103 mm) x 1.5 in. (38 mm) x 2.6 in. (65 mm) @ power off
6.2 oz (175 g) without battery or card
Weight
Tips, safety, maintenance
■ Follow basic safety precautions outlined in the “Important Safety
Instructions” booklet packed with your camera.
■ If you suspect water has gotten inside the camera, turn off the camera and
remove the batteries and card. Allow all components to air-dry for at least
24 hours before using the camera again.
■ Blow gently on the lens or camera screen to remove dust and dirt. Wipe
gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do
not use cleaning solutions unless designed specifically for camera lenses.
Do not allow chemicals, such as suntan lotion, to contact painted surfaces.
■ Service agreements are available in some countries. Contact a dealer of
Kodak products for more information.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Storage capacities
File sizes vary. You may be able to store more or fewer pictures and videos.
Picture storage capacity
Number of pictures
Best
Best (3:2) Better Good
16 MB internal memory 13
15
18
20
24
45
43
16 MB SD/MMC
32 MB SD/MMC
64 MB SD/MMC
128 MB SD/MMC
256 MB SD/MMC
16
32
36
48
87
65
73
97
175
350
700
131
262
147
294
194
388
Video storage capacity
Minutes/seconds of video
53 sec.
16 MB internal memory
16 MB SD/MMC
1 min.
32 MB SD/MMC
2 min. 15 sec.
4 min. 30 sec.
9 min.
64 MB SD/MMC
128 MB SD/MMC
256 MB SD/MMC
18 min.
Power-saving features
If no action for The camera
To turn it back on
1 minute
8 minutes
3 hours
Screen turns off.
Press the OK button.
Enters auto power off. Press a button or insert/remove card.
Turns off. Turn Mode dial Off, then back on.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Regulatory compliance
FCC compliance and advisory
Kodak EasyShare CX7330 zoom digital camera
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed or used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: 1) reorient or relocate the receiving antenna; 2) increase
the separation between the equipment and the receiver; 3) connect the
equipment to an outlet on a circuit different from that to which the receiver is
connected; 4) consult the dealer or an experienced radio/TV technician for
additional suggestions.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Where shielded interface cables have been provided with the product or
specified additional components or accessories elsewhere defined to be used
with the installation of the product, they must be used in order to ensure
compliance with FCC regulation.
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with
Canadian ICES-003.
Observation des normes-Class B—Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du Canada.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
A
C
cable
camera dock connector on
camera screen
computer
copy pictures
CRV3 battery
B
batteries
button
D
deleting
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
information
inserting
installing
internal memory
dock
E
K
external video device
Kodak EasyShare software
F
flash
L
era screen
light
G
lights
H
help
M
Macintosh
I
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
memory
menu
power
modes
printing
N
Ni-MH rechargeable battery
O
Q
quickview
overview
R
reviewing pictures
P
pictures
reviewing videos
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Slide Show
slide show
software
S
SD/MMC card
self timer
specifications
T
tagging
service and support
setting
tagging pictures
tips
troubleshooting
shutter
computer/connectivity
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
U
USB (universal serial bus)
V
videos
viewing picture
viewing picture, video
W
Windows computers
Z
zoom
54
Download from Www.Somanuals.com. All Manuals Search And Download.
|