Operator’s manual
Please read the operator’s manual carefully and make
sure you understand the instructions before using the
machine.
Original Instructions
English
115 32 10-26
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
SAFETY FIRST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Notes on types of warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warning labels on the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Symbols on the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
WORKING CIRCUMSTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
AVOID NOISE PROBLEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BEFORE STARTING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
USING THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TRANSPORTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
What is what? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
CABLING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
BLOW PIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
HARNESS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
FUEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
HOW TO MIX FUEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FUELING THE UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
STARTING ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ADJUSTING IDLE SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
AIR CLEANER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FUEL FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SPARK ARRESTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
COOLING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AIR INLET NET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SHOLDER STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Safety
Notes on types of warnings
SAFETY FIRST
WARNING
Instructions contained in warnings within this manual and
warning seals marked with a symbol on the blower concern
critical points which must be taken into consideration to prevent
possible serious bodily injury, and for this reason you are
requested to read all such instructions carefully and follow them
without fail.
Instructions labeled as shown above, concern critical steps
or procedures which must be followed in order to prevent
accidents which could lead to serious bodily injury or
death.This mark is used to indicate instructions which must
be followed without exception.
IMPORTANT
Instructions labeled as shown above concern steps or
procedures which, if not followed correctly, could lead to
mechanical failure, breakdown, or damage.
NOTE
Used to label supplementary instructions designed to
provide hints or directions useful in the use of the product.
Warning labels on the machine
The blower operator must make sure
that no bystanders or animals come
Symbols
nearer than 50 feet (15 meters).
Whenever several operators are
working in the same work area, they should maintain a safe
distance of at least 50 feet (15 meters) from one another.
WARNING! The machine can be a dangerous
tool if used incorrectly or carelessly, which can
cause serious or fatal injury to the operator or
others.
A breathing mask should be used when
there is a risk of dust.
Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.
Keep all parts of your body away from hot
surfaces.
Always wear:
• Hearing protection
• Approved eye protection
This product is in accordance with
applicable EC directives.
Noise emission to the environment according
to the European Community’s Directive. The
machine’s emission is specified in chapter
Technical data and on label.
Always wear protective gloves.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
IMPORTANT
The blower can forcibly throw objects that
can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.
If the warning label peels off or becomes soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels and
affix them in the required location(s).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Symbols on the machine
(c)
(a)
(b)
(d)
For safe operation and maintenance, symbols are carved in
relief on the machine. Using to these indications, please be
careful not to make a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: CLEANER BODY
(c) The direction to open the choke
Position: CLEANER BODY
(d) The direction to stop the engine
Position: CONTROL HANDLE
Safety Precautions
8. Under no circumstances may the design of the machine
be modified without the permission of the manufacturer.
Always use genuine accessories. Non-authorized
modifications and/or accessories can result in serious
personal injury or the death of the operator or others.
9. A blower is a dangerous tool if used carelessly or
incorrectly and can cause serious, even fatal injuries. It
is extremely important that you read and understand the
contents of this Operator’s manual.
WARNING
1. Read this Blower Operator Manual carefully. Be sure
you understand how to operate this unit properly before
you use it. Failure to do so could result in serious injury.
2. Be sure to keep this manual handy
so that you may refer to it later
whenever any questions arise. Also
note that you are requested to
contact the dealer from whom you
purchased the product for
assistance the event that you have
any questions which cannot be
10. Jonsered has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
answered herein.
11. The machine is only designed for blowing lawns,
pathways, asphalt roads and the like.
3. Always be sure to include this manual when selling,
lending, or otherwise transferring the ownership of this
product.
4. Do not lend or rent your machine without the owner's
manul.
5. Be sure that anyone using your unit understands the
information contained in this manual.
6. Never let a child use the machine.
7. Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Safety Precautions
WORKING CONDITIONS
AVOID NOISE PROBLEM
1. Refrain from operating the blower if you are tired, ill, or upset,
or if you are under the influence of alcohol, drugs or
medication
2. To reduce the risk of hearing loss associated with sound
levels, hearing protection is required.
3. To reduce the risk of injury associated
with thrown objects, always wear eye
protection and foot protection.
NOTE
Check and follow the local regulations as to sound levels
and hours of operations for blower.
1. Operate power equipment only at reasonable hours, not early
in the morning or late at night when people might be
disturbed. Comply with times listed in local ordinances.
2. To reduce sound levels, limit the number of pieces of
equipment used at any one time.
Approved protective goggles must
comply with standard ANSI Z87.1 in the
USA or EN 166 in EU countries.
3. Operate power blowers at the lowest possible throttle speed
to do the job.
4. Check your equipment before operation, especially the
muffler, air intakes and air filters.
4. To reduce the risk of injury associated
with the inhalation of dust, use a face
filter mask in dusty conditions.
5. Wear rubber-soled shoes or shoes with
some other form of anti-slip protection
to help protect you against falling.
WORKING PLAN
To reduce the risk of health damages, avoid excessive use and
take sufficient time to rest.
FUEL
6. To reduce the risk of injury associated
with objects being drawn into rotating
parts, do not wear loose clothing,
scarves, neck chains, hair longer than
shoulder length, or other loose
material.
WARNING
To reduce the risk of fire and burn injury:
a) Handle fuel with care. It is highly
flammable.
b) Do not smoke while handing fuel.
c) Do not refuel a hot engine.
d) Do not refuel a running engine.
e) Avoid spilling fuel or oil. Always wipe
unit dry before using.
f) Move at least 10 ft. (3 meters) away
from the fueling point before starting the engine.
g) Always store gasoline in a container approved for flammable
liquids.
h) Make sure the unit is properly assembled and in good
operating condition.
7. Prolonged use of a blower, exposing the operator to
vibrations and cold, may produce whitefinger disease
(Raynaud’s phenomenon), the symptoms of which include
tingling and burning sensations followed by loss of color and
numbness in the fingers. All factors which contribute to
whitefinger disease are not known, but cold weather,
smoking diseases or physical conditions as well as long
periods of exposure to vibration are mentioned as factors. In
order to reduce the risk of whitefinger disease, the following
precautions are strongly recommended
i) Do not use the blower near a fire, as
aiming the blower in the direction of a
flame may cause flammable
a) Keep your body warm. Never use the blower during rain.
b) Take more than 5 minutes of break in a warm place fre-
quently.
c) Maintain a firm grip at all times, but do not squeeze the
handles with constant, excessive pressure.
substances to ignite.
d) If you feel discomfort, redness and swelling of your fingers
or any other part of your body, see a doctor before it gets
worse.
BEFORE STARTING THE ENGINE
Each time before starting the engine, inspect the entire unit to
see if every part is in good order and is securely tightened in
place. If any damage is found in the fuel line, the exhaust line, or
the ignition wiring, do not use the blower until it has been
repaired.
8. This machine produces an electromagnetic field during
operation.This field may under some circumstances interfere
with active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend persons with medical
implants to consult their physician and the medical implant
manufacturer before operating this machine.
IMPORTANT
WORKING CIRCUMSTANCE
Before starting operation, always make sure to check if any
obstacles are left inside the volute case and net.The
obstacles may cause serious injury or damage to fan and
volute case.
1. To reduce the risk of injury associated
with exhaust fume inhalation, do not
operate in unventilated area. The
exhaust gases contain harmful carbon
monoxide.
2. Avoid using the blower where stable
footing and balance are not assured.
3. Never operate the machine in high
wind, bad weather, potentially explosive atmosphere, when
visibility is poor or in very high or low temperatures.
(Our recommended use environment is below 40 degrees C
(104 degrees F).)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Safety Precautions
4. To reduce the risk of injury associated with thrown objects.
WARNING
a) Watch out for children, pets, open windows or freshly
washed cars, and blow debris safely away.
b) Use the full blower tube extension so the air stream can
work close to the ground.
c) Do not allow bystanders in work area.
d) Do not point the blower
Check to see if the shock-absorbers have become cracked
or otherwise damaged. Note that failing to replace these
rubber and spring mounts when they have become cracked
or damaged may cause the engine to come loose from its
frame during use, thus resulting in possible serious bodily
injury.
tube in the direction of
people or pets.
If cracked, be sure to replace without delay.
e) Always check to be sure
that no debris has been
blown onto someone
else’s property.
f) Pay attention to the direction of the wind, do not work
against the wind.
5. To minimize blowing time.
a) Use rakes and brooms to loosen debris before blowing.
b) In dusty conditions, slightly dampen surfaces or use a
mister attachment when water is available.
c) Conserve water by using power blowers instead of hoses
for many lawn and garden applications, including areas
such as gutters, screens, patios, grills, porches and
gardens.
WARNING
To reduce the risk of injury associated with contacting
rotating parts, stop the engine before installing or removing
attachments. Never take off the Guard Net .
6. The blower must not be used while on
a ladder or scaffolding.
Always disconnect the spark plug before performing main-
tenance or accessing movable parts.
7. Never put the machine down with the
engine running unless you have it in
clear sight.
8. Never touch the spark plug or plug cord
while the engine is in operation. Doing
so may result in being subjected to an
electrical shock.
9. Never touch the muffler, spark plug, or
other metallic parts of the engine, or
area around the engine cover while the
engine is in operation or immediately
after shutting down the engine. These metallic parts reach
high temperatures during operation and doing so could result
in serious burns.
USING THE PRODUCT
WARNING
While using the product, if abnormal noise or vibration
occurs, stop the engine immediately and contact the near-
est Jonsered servicing dealer for assistance. Checking the
fan is very important. If the rotating fan should break up, it
might lead to serious accidents.
WARNING
The temperature of the machine may increase after stop-
ping the engine. Especially never forget to cool down the
engine before refueling the machine.
1. This blower is a backpack type, and is shouldered while
operating. It is operated and controlled with the handle on
the tube by right hand.
10. In an emergency, pull up the lower
portion of both strap buckles to loosen
the straps. Move yourself away from
the unit.
2. Check the work area that the blower will be used in and
remove or cover all valuables that may be damaged by the air
blast or thrown debris.
3. Make sure you can move and stand
safely. Check the area around you for
possible obstacles (roots, rocks,
branches, ditches, etc.) in case you
have to move suddenly. Take great
care when working on sloping ground.
11. After using blowers and other
equipment, CLEAN UP! Dispose of
debris in trash receptacles.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Safety Precautions
MAINTENANCE
1. In order to maintain your product in proper working order,
perform the maintenance and checking operations described
in the manual at regular intervals.
2. Always be sure to turn off the engine and disconnect the
spark plug before performing any maintenance or checking
procedures.
TRANSPORTATION
• Drain the fuel from the fuel tank before transporting or storing
the blower.
• Secure the blower so that it does nor receive damage from
shock doing transportation.
• Do not apply strong forces to the blower, such as throwing it or
dropping it. Doing so in validates the warranty.
WARNING
STORAGE
• When storing the blower, choose a space indoors, dry, cool
and dark, well-ventilated, free from dust and out of the reach
of children.
The metallic parts, engine cover, and area around the
engine reach high temperatures immediately after stopping
the engine.
3. Examine the blower at intervals for loose fasteners and
rusted or damaged parts. Use special care around the fuel
line, the muffler, and the ignition wiring.
4. All engine service except for those described in this manual
should be performed by competent service personnel.
Improper service to the blower fan and muffler could cause a
hazardous failure.
5. When replacing the any other part or any lubricant, always be
sure to use only Jonsered products or products which have
been certified by Jonsered for use with the Jonsered product.
6. In the event that any part must be replaced or any
maintenance or repair work not described in this manual
must be performed, please contact the nearest Jonsered
servicing dealer for assistance.
7. Do not use any accessory or attachment other than those
bearing the Jonsered mark and recommended for the unit.
8. Under no circumstances should you ever take apart the
product or alter it in any way. Doing so might result in the
product becoming damaged during operation or the product
becoming unable to operate properly.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
English
What is what?
<BB2250>
2
9
1
5
4
6
10
23
7
3
8
11
12
14
16
13
22
15
20
24
21
17
18
19
1. Frame
13. Throttle Lever
14. Elbow
2. Harness
3. Engine Cover
15. Clamp (large)
16. Flexible hose
17. Clamp (small)
18. Swivel joint
4. Volute Case, Cover
5. Net
6. Air Cleaner
7. Recoil Starter
8. Fuel Tank
19. Clamp (for cabling)
20. Blow pipe
9. Spark Plug Cap
10.Choke Lever
11. Control handle
12. Stop Switch
21. Pipe end
22. Flat nozzle
23. Operator’s manual
24. Combination spanner
■ DISPOSAL
When disposing your machine, do not disassemble the machine.
When disposing your machine, fuel or oil for the machine, be sure to follow your local regulations.
Frame:
Harness:
Throttle lever:
PE (Polyethylene)
Chemical fiber
Metal, Plastic
Volute case, Volute cover, Engine cover: PA66GF (Glass-reinforced nylon), Brass
Pad:
Chemical fiber
Flexible hose:
Pipes:
Fan:
EVA (Ethylene vinyl acetate)
PP (Polypropylene), PE (Polyethylene)
PA66GF (Glass-reinforced nylon)
Urethane
Element:
* The insert nut of volute case and fan can be taken off.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Technical data
MODEL
BB2250
Dimensions (L x W x H) mm
401x460x495
Dry Weight (including pipes) kg
10.1
Dry Weight (without accessories) kg
Fuel Tank Capacity liter
Engine Type
9.4
2.1
Air cooled 2-cycle gasoline engine
Piston Displacement cu. cm
Air Filter
50.2
Half wet urethane
Rotary
Carburetor (Diaphragm) valve type
Ignition System
Digital IgnitionI
NGK CMR7H
Spark arrester equipped
2000
Spark Plug
Muffler
Idle speed rpm
Operating Engine Speed rpm
Fuel Consumption liter/h
Air Volume (round Pipe) cu. m/min
Air Volume (@ housing) cu. m/min
Air velocity m/sec (Maximum)
Noise emissions (see note 1)
Sound power level, measured dB(A)
2000 to 6000
1.05
11,5
18,9
85
103
104
Sound power level, guaranteed L dB(A)
WA
Sound levels (see note 2)
Equivalent sound pressure level at the operator’s ear, measured according
to (ISO22868) dB(A)
89
Vibration levels (see note 3)
Equivalent vibration levels (a
) at handle, measured according to
hveq
1,4
2
(ISO22868) m/s
• The data shown above are those in the case of one straight pipe and round pipe.
• Specifications are subject to change without notice.
Note 1: Noise emissions in the environment measured as sound power (L ) in conformity with EC directive 2000/14/EC. Reported sound
WA
power level for the machine has been measured with the original attachment that gives the highest level. The difference between
guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the measurement result and the
variations between different machines of the same model according to Directive 2000/14/EC.
Note 2:The equivalent sound pressure level value is calculated with a work cycle of a duration of 1/7 for idling and 6/7 for racing. Reported
data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 1 dB(A).
Note 3: The equivalent vibration total value is calculated with a work cycle of a duration of 1/7 for idling and 6/7 for racing. Reported data
2
for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s .
10
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Assembly
■ FLEXIBLE HOSE AND SWIVEL JOINT
1. Connect the blower and swivel joint with flexible hose. Clamp both ends of the
flexible hose securely with the hardware supplied with the unit.
F1
(1) Flexible hose
(3) clamp (large)
(2) Swivel joint
(4) Clamp (small)
(3)
(1)
NOTE
(4)
(2)
A light lubricant may be used to ease assembly of flexible hose to blower tube.
■ CONTROL HANDLE
1. Set up the handle holder to the swivel joint and tighten the screw on the holder.
When setting up the handle holder, please make sure to match the handle holder to
the convex on the swivel joint as shown in F2.
F2
2. Adjust the position to achieve a comfortable working position, and tighten the
control handle.
(1) Handle holder
(2) Swivel joint
(3) Screw
■ CABLING
• Use the clamp to fasten the cabling to the flexible hose.
F3
(1) Clamp
(2) Cabling
(3) Flexible hose
■ BLOW PIPES
F4
1. Connect the straight pipe and pipe end. Push the pipes together and turn them so
they lock in relaton to one another until the connection is locked.
NOTE
A light lubricant may be used to ease assembly of the blower tube.
NOTE
(1)
F5
If longer tube is required, the second straight pipe can be connected
with the first one.
If higher air speed is required, the round blow pipe can be replaced by the
flat nozzle with the second straight pipe.
(1) Flat nozzle.
■ HARNESS
WARNING
The harness must always be worn when working with the machine. Failure to do
so means you will be unable to maneuver safely and this can result in injury to
yourself or others.
A correctly adjusted harness and machine significantly facilitates the work. Adjust the
harness to give the best working position.
F6
Tighten the side straps so that the pressure is evenly distributed across the shoulders.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Fuel
■ FUEL
■ FUELING THE UNIT
1. Untwist and remove the fuel cap.
2. Put fuel into the fuel tank to 80% of the full capacity.
3. Fasten the fuel cap securely and wipe up any fuel spillage
around the unit.
WARNING
• Gasoline is very flammable. Avoid
smoking or bringing any flame or
sparks near fuel. Make sure to
stop the engine and allow it cool
before refueling the unit. Select
outdoor bare ground for fueling
and move at least 10ft (3m) away
from the fueling point before
starting the engine.
• The engines are lubricated by oil
specially formulated for air-cooled
2-cycle gasoline engine use. If
Jonsered oil is not available, use
an anti-oxidant added quality oil
expressly labeled for air-cooled 2-
cycle engine use. (JASO FC
WARNING
1. Select bare ground for fueling.
2. Move at least 10 feet (3 meters) away from the fueling
point before starting the engine.
3. Stop the engine and let it cool for a few minutes before
refueling the unit. At that time, be sure to sufficiently
agitate the mixed gasoline in the container.
4. Do not smoke or place hot objects near fuel.
GRADE OIL or ISO EGC GRADE)
• Do not use BIA or TCW (2-stroke
water-cooling type) mixed oil.
RECOMMENDED MIXING RATIO
GASOLINE 50:OIL 1
FOR YOUR ENGINE LIFE, AVOID;
• Exhaust emission are controlled
1. FUEL WITH NO OIL (RAW GASOLINE) - It will cause severe
damage to the internal engine parts very quickly.
2. GASOHOL - It can cause deterioration of rubber and/or
plastic parts and disruption of engine lubrication.
3. OIL FOR 4-CYCLE ENGINE USE - It can cause spark plug
fouling, exhaust port blocking, or piston ring sticking.
4. Mixed fuels which have been left unused for a period of one
month or more may clog the carburetor and result in the
engine failing to operate properly.
5. When storing the product for a long period of time, clean the
fuel tank after rendering it empty. Next, activate the engine
and empty the carburetor of the composite fuel.
6. When scrapping the used mixed oil container, scrap it only at
an authorized repository site.
by the fundamental engine
parameters and components (i.e.,
carburation, ignition timing and port timing) without
addition of any major hardware or the introduction of an
inert material during combustion.
• These engines are certified to operate on unleaded
gasoline.
• Make sure to use gasoline with a minimum octane
number of 89 RON (USA/Canada: 87AL)
• If you use a gasoline of a lower octane value than
specified, there is a danger that the engine temperature
may rise and an engine problem such as piston seizing
may consequently occur.
• Unleaded gasoline is recommended to reduce the
contamination of the air for the sake of your health and
the environment.
NOTE
• Poor quality gasolines or oils may damage sealing rings,
fuel lines or fuel tank of the engine.
For details of quality assurance, read the description in the
Warranty section carefully. Moreover, normal wear and
change in product with no functional influence are not
covered by the warranty. Also, note that if the usage in the
instruction manual is not observed for the mixed gasoline,
etc. as described herein, it may not be covered by the
warranty.
■ HOW TO MIX FUEL
IMPORTANT
Pay attention to agitation.
1. Measure out the quantities of gasoline and oil to be mixed.
2. Put some of the gasoline into a clean, approved fuel
container.
3. Pour in all of the oil and agitate well.
4. Pour in the rest of gasoline and agitate again for at least one
minute. As some oils may be difficult to agitate depending on
oil ingredients, sufficient agitation is necessary for the engine
to last long. Note that, if the agitation is insufficient, there is
an increased danger of early piston seizing due to an
abnormally lean mixture.
5. Indicate the contents on outside of container for easy
identification to avoid mixing with raw gasoline or other
containers.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Operation
■ STARTING ENGINE
IMPORTANT
• Avoid operating the blower with the flexible tube and swivel joint
disconnected.That will reduce the cooling air and the engine could be
damaged by overheating.
F7
1. Push the primer bulb until fuel flows out in the clear tube.
2. When the engine is cool, close the choke.
(1) Choke Lever
(2) Primer Bulb
(3) OPEN
(4) CLOSE
3. Set the stop switch to the start position.
4. Set the throttle lever position in about 1/3 open position.
F8
(1) Full Throttle
(2) About 1/3 Open
(3) Idling
(4) Stop switch
5. To start, hold the top of the blower firmly with your left hand. Pull the starter knob
slowly until you feel it engage and then give it a vigorous strong pull.
F9
IMPORTANT
• Never twist the starter cord around your hand.
• Avoid pulling the starter rope out to its full extent and allowing the starter rope
to snap back.This will prevent premature damage to the starter.
• Do not let a person stand near the blower or the exhaust port.
6. Once the engine is running, gradually open the choke if it was set closed, and let the
engine run at idle speed for a minute to warm it up.
NOTE
When the engine fails to start after several attempts due to overchoking, open
the choke and repeat pulling the rope.
WARNING
Air comes out as soon as the engine is started, even at idle speed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Operation
■ ADJUSTING IDLE SPEED
• The idling speed is set for 2000 rpm at the factory. If it is necessary to adjust the idle
speed, use the adjustment screw on the top side of carburetor.
F10
(1) Idling Adjustment Screw
■ STOPPING ENGINE
• Move the throttle lever to the idling position and set the stop switch to the stop
position.
F11
(1) Stop switch
NOTE
If the engine does not stop when setting the stop switch to the stop position,
close the choke lever and stop the engine.
In this case, please repair the machine at your nearest servicing dealer.
F12
(1) Choke Lever
(2) OPEN
(3) CLOSE
14
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Maintenance
Maintenance, replacement, or repair of the emission control device and systems may be performed by any non-road engine repair
establishment or individual.
Daily or
Before use
Every 25
hours after
Every 50
hours after
Every 100
hours after
System/Compornent
Air Filter
Procedure
Inspect/Clean
Inspect/Replace
Inspect/Replace
Inspect/Clean
Inspect/Clean
Inspect/Clean
Tighten
x
x
x
Fuel Leaks
x
x
x
Fuel Filter
Fuel Line
Spark Plug
Muffler
x
x
x
Bolts on muffler
Entire unit
Inspect/Replace
Inspect/Clean
Inspect/Clean
Tighten
Muffler Spark Arrester
Cooling System
Screws/Nuts/Bolts
Cylinder Exhaust Port
x
x
x
Inspect/Clean
x
WARNING
Make sure that the engine has stopped and is cool before performing any service
to the blower. Contact with rotating blower fan or hot muffler may result in a
personal injury.
■ AIR CLEANER
• Check the air cleaner before use.
A clogged air filter may increase fuel consumption while cutting down the engine
power.
• Never operate the blower without an air filter or with a deformed or broken filter
element because unfiltered dusty air will quickly ruin the engine.
CLEANING AIR FILTER:
1. Unscrew the 2 knobs and remove the air cleaner cover.
2. Wash the filter element with neutral detergent and warm water and then dry
completely. (Wash the filter once a week)
F13
3. Moisten the filter element with a small amount of 2 cycle oil.
NOTE
• Do not apply 4 cycle motor oil as they may damage element.
• Do not use mixture gasoline.This type of gasoline does not contain much of
oil, so that the element becomes dry after a few hours.
4. Reinstall the element into the packing,set the packing into the air cleaner body.
Never forget to attach the screen properly. If the screen is not attached, the cleaner
will not seal properly and the dusts come into the cylinder.
5. Reinstall the air cleaner cover and screw the 2 knobs.
[
F14
(1) Air Cleaner Cover (2) Screen
(3) Cleaner Body
(5) Packing
(4) Element
■ FUEL FILTER
F15
• A clogged fuel filter may cause poor acceleration of the engine. Check periodically to
see if the filter is clogged with dirt.The filter can be taken out of the fueling port using
a small wire hook. Disconnect the filter assembly from the fuel pipe and unhook the
retainer to disassemble it. Clean the components with gasoline.
(1) Screen
(3) Holder
(2) Element (x 2)
(4) Retainer
15
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Maintenance
■ SPARK PLUG
F16
• The spark plug may gather carbon deposits on its firing end with reasonable use.
Remove and inspect the spark plug every 25 hours and clean the electrodes as
necessary with a wire brush. The spark gap should be adjusted to .025 in (0.6 to
0.7mm).
• Plug manufacturers recommend replacing the plug twice a year to avoid unexpected
plug failure in a job.
REPLACEMENT PLUG IS A NGK CMR7H.
IMPORTANT
• Note that using any spark plugs other than those designated may result in the
engine failing to operate properly or in the engine becoming overheated and
damaged. Check that the spark plug is fitted with a suppressor.
• To install the spark plug, first turn the plug with your hands until it is tight,
then tighten it a quarter turn more with a socket wrench.
■ MUFFLER
F17
WARNING
• Periodically inspect the muffler for loose fasteners, damage or corrosion. If
any sign of exhaust leakage is found, do not use the blower and have it
repaired immediately.
1. Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon
buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder
exhaust port at the same time.
2. Tighten all screws, bolts, and fittings.
■ SPARK ARRESTER
• The muffler is equipped with a spark arrester to prevent red hot carbon from flying
out of the exhaust outlet. Periodically inspect and clean as necessary with a wire
brush.
F18
(1) Bolt
(2) Bolt
(3) Spark Arrester
(4) Diffuser
WARNING
• Before starting operation, always make sure to check if the muffler is properly
held by the bolts (2).
Fastening Torque: 8 to 12 N·m
• Also make sure that the spark arrester and the diffuser are properly attached
with the bolts (1). (Fastening Torque : 2 to 3 N·m)
■ COOLING SYSTEM
• To keep the working temperature as low as possible the machine is equipped
with a cooling system.
F19
(1)
(1) Cooling fins on the cylinder.
• Clean the cooling system with a brush once a week, more often in
demanding conditions. A dirty or blocked cooling system results in the machine
overheating which causes damage to the piston and cylinder.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Maintenance
■ AIR INLET NET
F20
IMPORTANT
(1)
• Blown air is taken in from the air inlet net. If the air flow drops during opera-
tion, stop the engine and inspect the air inlet net for blockage by obstacles.
• Note that failure to remove any such obstacles may result in the engine
becoming overheated and damaged.
(1) Net
WARNING
Never use the blower without the net on the blower. Before each use, check that
the net is attached in place and is free from any damage.
■ SHOLDER STRAP
• If the shoulder strap is damaged it may break during use, thus causing the product
to fall and resulting in personal injury. Follow the instructions below to replace the
shoulder strap with new one.
F21
• Pass the upper end of the strap through the hanger, making the FLAPPED SIDE
OUTSIDE.
• Put the end of the strap through the ring on the strap, and then push the ring toward
the hanger as close as possible.
(1) Ring
Storage
BEFORE STORING THE BLOWER:
1. Drain the fuel tank and push the primer bulb until it becomes empty of fuel.
2. Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and install the spark plug.
3. Store unit in a dry, cool and dark, well-ventilated, dust-free place, out of the reach of children.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
|