JVC Network Card KA DV5000 User Manual

NETWORK PACK STARTUP GUIDE  
NETZWERKPACK BEDIENUNGSLEITFADEN  
BACK DE RESEAU GUIDE DE DEMARRAGE  
GUÍA DE INICIO DEL ADAPTADOR DE RED  
GUIDA RAPIDA AL CORREDO DI RETE  
INSTRUCTIONS  
KA-DV5000  
BEDIENUNGSANLEITUNG  
CK  
A
V5000  
ORK  
P
KA-D  
NETW  
MANUEL D’INSTRUCTIONS  
INSTRUCCIONES  
ISTRUZIONI  
PO  
W
SUPPL  
ER  
Y
ON  
OFF  
N
E
T
W
O
K
P
A
R
C
K
KA-D  
For Customer Use:  
V5000  
VICTOR COMPANY OF JAPAN, LIMITED  
Enter below the Serial No. which is  
located on the body. Retain this  
information for future reference.  
This instruction book is made from  
100% recycled paper.  
® is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.  
Model No.  
Serial No.  
KA-DV5000  
® is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.  
Printed in Japan  
LST0083-001A  
© 2002 VICTOR COMPANY OF JAPAN, LIMITED  
LST0083-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Thank you for purchasing this product.  
Product Components  
(These instrustions are for KA-DV5000U)  
Before beginning to operate this unit, please read the instruction manual carefully in order  
to make sure that the best possible performance is obtained.  
Network Pack  
KA-DV5000  
Network Pack Startup Guide  
(This document)  
Due to design modifications, data given in this  
instruction book are subject to possible change  
without prior notice.  
K
CK  
0
0
V5000  
A
0
5
-D R  
P
K
ORK  
A
P
KA-D  
E
W
T
NETW  
WARNING:  
PO  
WER  
SUPPL  
Y
O
N
TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE  
THIS APPLIANCE TO RAIN OR  
MOISTURE.  
O
F
F
N
K
E
T
W
P
O
R
A
C
K
K
A
-
D
V
5
0
0
0
Adapter for encoding/decoding video/audio  
data by connecting to GY-DV5000.  
This document describes the basic matters  
for use of the Network Pack.  
AVERTISSEMENT:  
POUR EVITER LES RISQUES  
D’INCENDIE OU D’ELECTRO-CUTION,  
NE PAS EXPOSER LAPPAREIL A  
LHUMIDITE OU A LA PLUIE.  
The following software and these Instructions are included on the provided  
CD-ROM.  
CD-ROM  
• Streamproducer Software  
Software used for distributing movies on a network.  
• Network Pack User’s Guide (pdf)  
Reference guide for the Network Pack.  
POWER SYSTEM  
Connection of POWER supply  
The power for the network pack is supplied through  
the camera that is connected to the network pack.  
User’s Guide (pdf) toStreamproducerthe software for network distri-  
bution.  
Software for live broadcasting and distribution on networks.  
This equipment is in conformity with the provisions and protection requirements of the correspond-  
ing European Directives.This equipment is designed for professional video appliances and can be  
used in the following environments:  
Setting of the KA-DV5000 is performed on the menu screen of the GY-DV5000 camcorder.  
For details on the setting methods, please see the Network Pack User’s Guide (pdf) included  
on the provided CD-ROM.  
• residential area (in houses) or rural area  
• commercial and light industry; e.g. offices or theatres  
• urban outdoors  
CD-ROM\ENU\Network Pack User’s Guide (pdf)  
When the Streamproducer program included on the provided CD-ROM is installed, the Net-  
work Pack User’s Guide (pdf) is automatically installed on the PC and added to the Start  
menu.  
In order to keep the best performance and furthermore for electromagnetic compatibility. Use the  
PC Card which acquired a CE mark.  
[Start/Programs/KA-DV5000U/User’s Guide]  
Caution  
Where there are strong electromagnetic waves or magnetism, for example near a radio or TV  
transmitter, transformer, motor, etc., the picture may be disturbed. In such case, please keep the  
apparatus away from the sources of the disturbance.  
The Adobe Acrobat Reader is required to view PDF files.  
E-2  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Precautions (cont’d)  
Features ................................................................................................................................................. 4  
Precautions ............................................................................................................................................ 4  
What the KA-DV5000 can be used for ................................................................................................... 6  
Controls, Connectors and Indicators ...................................................................................................... 8  
How to Attach ......................................................................................................................................... 9  
Confirming correct attachment ............................................................................................................. 10  
Installing Streamproducer .................................................................................................................... 11  
Specifications ....................................................................................................................................... 12  
Streamproducer Operating Environment  
Under the following conditions, the Streamproducer can be used in the required operating environment.  
• When using 1 camera or 1 file.  
• When recording of the camera image is not performed.  
• When switched distribution is not performed.  
Required operating environment  
Hardware  
CPU  
Pentium III 700 MHz  
128 MB  
Features  
Memory  
Display  
By connecting the unit to GY-DV5000, video/audio of camera or tape playback can be encoded/  
decoded in realtime. Video data is converted to MPEG-4 and audio data is converted to G726.  
XGA (1024 X 768)  
Hard disk * 50 MB for installation  
* 1 hour viewing time requires empty hard disk space equivalent to 25 MB (high  
Installing a LAN-card in the PC card slot enables real-time streaming.  
Installing a Compact Flash card in the PC card slot enables real-time capturing.  
Network distribution of the video/audio file created by the KA-DV5000 is possible when the  
“Streamproducer” program included on the provided CD-ROM is installed on the PC.  
compression) to 200 MB (low compression).  
Network  
* 1 LAN system for connecting the network pack  
* Internet connection to download codec program for playback of moving pictures  
* Other network environment for distribution if distribution is to be performed in other  
environment than that described above  
Precautions  
Be sure to turn the camcorder’s power supply OFF before the KA-DV5000 is attached to the  
camcorder.  
Software  
OS  
Be sure to turn the camcorder’s power supply OFF before inserting or removing CF (Compact  
Flash) cards, etc., into and from the camcorder. Inserting or removing cards while the camcorder’s  
power supply is turned ON can result in corruption of the recorded sections of the card or damage  
to the card itself.  
The KA-DV5000 accepts the following cards for which operation has been confirmed: (As of August  
2002)  
Windows 2000 Professional (English), Windows XP Home Edition, Windows XP  
Professional  
Others  
An environment in which Windows Media Player 7.1 or later is already installed is  
necessary for installation of Streamproducer  
Operating voltage  
Current consumption  
• Wired LAN-card  
5 V or 3.3 V  
500 mA (5 V)  
When using multiple cameras or files, the following operating environment is recommended in order to  
US:  
Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket Communications, Inc)*1  
Asia:  
EA2906-194 (Revision C) (Name of manufacturer: Socket Communications, Inc)*1  
(The Revision designation is indicated in the upper right of the serial number label affixed to the  
package.)  
EA2900-117 (Revision C) (Name of manufacturer: Socket Communications, Inc)*1  
make full use of the application’s functions.  
Recommended Operation Environment  
Hardware  
CPU  
Pentium 4 2.2 GHz or higher  
512 MB or more  
• Wireless LAN-card  
Memory  
Display  
TEW-201PC,TEW-202CF (Name of manufacturer: TRENDware)  
WCF11 (Name of manufacturer: LINKSYS)*2  
• CF (Compact Flash) card  
SXGA (1280 X 1024) or more  
Other operating environment demands are the same as the required operating environment demands.  
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)*1  
*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter  
*2: Use PCMCIA card TYPE 2 adapter  
Do not use other cards that those for which operation has been confirmed. Improper installation  
may cause damage to the KA-DV5000.  
MEMO  
The described required operating environment and recommend operating environment are both  
meant as guidelines to ensure optimal use of the application but are not meant as guarantee of  
operation. Also, even if you use a computer that complies with the operating environment, optimal  
use of the application may not be obtainable due to the configuration of your system.  
For the latest operational check card, visit the website below or contact your JVC dealer.  
* The names of actual companies and products mentioned in this document may be the trademarks or  
registered trademarks of their respective owners.  
In this document, symbols like ™, ®, ©, etc. have been omitted.  
E-4  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What the KA-DV5000 can be used for  
What the KA-DV5000 can be used for (cont’d)  
Sending camera video/audio by email using CF (Compact Flash) card  
Connecting a notebook computer for remote control with monitor  
CAM&VTR CONTROL  
NETWORK  
SETUP  
VTR CONTROL  
REC REW STOP FF PLAY PAUSE  
CAM  
VTR  
PORT  
NUMBER  
AUTO  
ON  
ON  
OFF  
OFF  
CAMERAA&VTR  
CONTROL  
BARS  
WHITE BAL  
FAW  
ENCODE  
PARAMEETERS  
-3  
AUTO  
IRIS  
MANUAL CLOSE  
OPEN  
STREAM  
CAPTURE  
EDITSEARCH  
MONITOR  
FILTER  
LOLUX  
ON OFF  
1
2
3200K  
5600K  
1
1
/
8
ND  
64 ND  
STATUS  
.3 5600K  
.4 5600K  
/
POWER  
SUPPL  
Y
SHUTTER  
MENU  
ALC  
STEP  
0dB  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
OPEN  
GAIN  
-3dB  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
A
U
D
I
O
I
N
P
U
T
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
AUTO  
VTR  
NORMAL  
SPOT  
CH-1  
L
CAM  
MANUAL  
NETWORK  
PACK  
KA-DV5000  
STEP  
OFF  
1/250  
SHUTTER  
OK  
POWER  
VTR  
ON  
OFF  
CANCEL  
(c) copyright 2002 VICTOR COMPANY OF JAPAN, LIMITED. All rights reserved  
1. Using the KA-DV5000 for recording  
the camera image on a CF card.  
INTERNET  
2. Sending an image file stored on a  
CF card as an e-mail attachment  
Camera settings and VTR control can be performed using a notebook computer.  
Operation method  
See Network Pack User’s Guide (pdf) “CF card recording”  
Operation method  
See “Streamcodec” in the Network Pack User’s Guide.  
Viewing and filing camera images on your PC using “Streamcapture”  
CAM&VTR CONTROL  
Distributing camera images on an intranet  
NETWORK  
SETUP  
VTR CONTROL  
REC REW STOP FF PLAY PAUSE  
CAM  
VTR  
PORT  
NUMBER  
AUTO  
ON  
ON  
OFF  
OFF  
CAMERAA&VTR  
CONTROL  
BARS  
WHITE BAL  
FAW  
ENCODE  
PARAMEETERS  
AUTO  
-3  
IRIS  
MANUAL CLOSE  
STREAM  
CAPTURE  
LOLUX  
O
N
O
F
F
ALC  
STEP  
0dB  
GAIN  
-3dB  
STEP  
OFF  
1/250  
SHUTTER  
OK  
CANCEL  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
3200K  
(c) copyright 2002 VICTOR COMPANY OF JAPAN, LIMITED. All rights reserved  
1
2
5600K  
1
/
8
ND  
64 ND  
STATUS  
.3 5600K  
.4 5600K  
1
/
POWER  
SUPPL  
Y
SHUTTER  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
A
U
T
O
I
R
I
S
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
A
U
D
I
O
I
N
P
U
T
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
COMPRESS  
A
U
D
I
O
S
E
L
E
C
T
VTR  
CH-1  
CH-2  
L
AUTO  
CAM  
MANUAL  
NETWORK  
PACK  
KA-DV5000  
POWER  
VTR  
ON  
OFF  
2. Using Streamcapture for  
viewing and/or filing the  
camera images on a PC  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
1
1
/
8
ND  
64 ND  
STATUS  
/
POWER  
SUPPL  
Y
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
A
U
D
I
O
I
N
P
U
T
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
AUTO  
VTR  
1. Using the KA-DV5000  
to transfer the camera  
images to a PC  
NORMAL  
SPOT  
CH-1  
L
CAM  
MANUAL  
HUB  
NETWORK  
PACK  
KA-DV5000  
POWER  
VTR  
ON  
OFF  
Windows Media Server  
Operation method  
• See “LAN card”, “Streamcapture” in the Network Pack User’s Guide (pdf)  
• See the User’s Guide to the “Streamproducer” software for network distribution.  
2. Using Streamproducer to  
redistribute the camera images  
transferred to the PC  
1. Using the KA-DV5000  
to transfer the camera  
images to a PC  
3. Using Windows Media Player  
to view the distributed camera  
images on a PC  
Operating environment  
Operating environment  
• Windows 2000, XP  
• Internet Explorer 5.01, 5.5 or 6.0  
• JavaScript enabled  
Operating environment  
• Windows 98 (SE), Me, 2000,  
XP  
• Windows 2000, Windows XP Home Edition, Windows XP Professional  
• Internet Explorer 5.01, 5.5 or 6.0  
• JavaScript enabled  
Operation method  
• See the User’s Guide to the “Streamproducer” software for network distribution.  
• See “Network settings”, “LAN card” in the Network Pack User’s Guide (pdf)  
E-6  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls, Connectors and Indicators  
How to Attach  
Below is the procedure for attaching the main  
unit to the DV camcorder.  
7
Mount using the procedure shown below.  
2
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
3200K  
1
2
5600K  
1
/
8
ND  
64 ND  
STATUS  
1
2
Turn off the camcorder power.  
.3 5600K  
.4 5600K  
1
/
0
CK  
A
00  
V5000  
5
SHUTTER  
-D  
KA-D  
NETW  
L
C
D
B
R
I
G
H
T
DISPLAY  
A
ORK  
P
MENU  
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
A
U
T
O
I
R
I
S
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
8
3
5
B
C
MODE  
AUDIO INPUT  
Remove the battery case.  
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
VTR  
CH-1  
CH-2  
L
AUTO  
CAM  
MANUAL  
Remove the battery case mounting screws on  
the back of GY-DV5000, remove the battery  
case and remove the internal connector.  
See page 35 of the GY-DV5000 Instruction  
Manual  
POWER  
VTR  
ON  
OFF  
1
4
POWER  
VTR  
ON  
OFF  
D
3
4
Insert the connector wire of the camcorder  
through the back of the network pack to the  
front.  
¡
PO  
WER  
4
SUPPL  
1
Y
9
6
A
ON  
OFF  
Tilt the network pack diagonally, set the upper  
hooks on the cut-away section of the  
camcorder from the top and turn downward.  
Caution  
Make sure the cushion does not shift  
when hooking the network pack to the cut-  
away section of the camera.  
NETW  
PA  
2
0
ORK  
K
C
KA-D  
V5000  
3
1 Power switch  
2 Camera connection terminal  
9 Battery case mounting screws  
Screws for mounting the battery case after  
attaching the main unit.  
For connecting DV camcorder (GY-  
DV5000). (See page 9)  
5
6
Align the connectors of the network pack and  
camcorder and connect.  
5
0 Main unit mounting screws  
Used when mounting the main unit to the  
camera.  
Mount the network pack to the camcorder  
using the 2 mounting screws on the lower  
section of the network pack.  
3 PC card slot  
For inserting LAN card, Compact Flash  
card, etc.  
BH cushion  
(included)  
A Battery case wire passage  
7
Mount the battery case on the back of the  
network pack.  
4 Main unit mounting hooks  
Used when mounting to the main unit by  
hooking to the cut-away section of the  
camcorder.  
B Cable clamp mounting hole  
Hole for attaching the included cable  
clamp. Remove the bushing before  
attaching the cable clamp.  
Insert the cushion on the back of the network  
pack, connect the connector from the network  
pack to the connector on the battery case,  
clamp wires as shown below, and fix the  
battery case to the back of the network pack  
using the mounting screws.  
5 EJECT button  
C Bushing  
Press when ejecting card.  
D Cable clamp (included)  
6 Service terminal  
See page 35 of the GY-DV5000 Instruction  
Manual  
Do not use.  
For use with LAN card cable  
and LAN cable.  
6
7
7 Lock/release button  
Storing the connector  
To open the cover, press the [PUSH]  
section and lift.  
Caution  
¡ Remove the busing.  
Remove by pinching the head of the  
bushing.  
Clamps  
Fix unused connector wire to the back of  
the camera or back of network pack using  
the clamps so that the wire does not  
become pinched.  
8 Cover  
Cover for the PC card slot.The cover can  
be removed by opening and twisting in a  
backward direction.  
To battery case  
Attach the cable clamp  
Place vertically  
and clamps  
E-8  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Confirming correct attachment  
Installing Streamproducer  
1. Insert the CD-ROM with Streamproducer into the CD-ROM drive.  
Check to see whether the main unit has been  
mounted correctly using the procedure shown  
below.  
Wait until the access lamp of the CD-ROM  
drive goes out.  
1 Turn off the power of GY-DV5000 and KA-  
The screen shown on the left appears.  
DV5000.  
2 Press the button on the side of the main  
unit, open the cover and insert a card in  
the card slot.  
3 Close the cover and turn on the KA-  
DV5000 power.  
4 Turn on the GY-DV5000 power.  
5 Check the card status. Check to see that  
the card status according to the card type  
is displayed on the LCD monitor and  
viewfinder screen of GY-DV5000.  
2. Click on “English”.  
The screen shown on the left appears.  
Memo  
During initialization  
after the power is  
turned on, the card  
status display shown  
on the left is dis-  
played.  
Caution  
: Card not inserted  
: LAN card  
Be sure to turn off the GY-DV5000 power  
before removing card.  
Removing/attaching the cover  
Removing the cover  
e
3. Click on “Install Streamproducer”.  
1 Open the cover.  
: Compact Flash card  
C
F
The Installer starts up.  
Detailed information on how to operate the Streamproducer is described in the “Read  
User’s Guide”, so please refer to this.  
The “Read User’s Guide” can be invoked by selecting:  
Start menu/Programs/Streamproducer/User’s Guide.  
2 Remove by pressing in  
as shown on the right  
so that the cover  
widens on sides.  
Memo  
Depending on the card shape, the cover  
may get in the way or may not close  
correctly. In this case, the cover can be  
removed by twisting the cover backward  
while it is open.  
Attaching the cover  
Perform the steps  
above in reverse.  
E-10  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Mass:  
480 g (main unit only)  
Power supply:  
Supplied from the GY-DV5000  
Power consumption:  
DC 12 V --- 0.5 A (main unit only)  
Allowable operating temperature:  
Allowable storage temperature:  
Allowable operating humidity:  
Provided accessories  
0°C to 40°C  
–20°C to 60°C  
30% to 80% RH  
CD-ROM  
INSTRUCTIONS  
Warranty Card (USA and Canada only)  
BH Cushion  
Cable Clamp  
External Dimensions (Unit: mm)  
40.2  
83.2  
POWER  
SUPPL  
Y
O
N
O
F
F
NETWORK  
PACK  
NETWORK  
PACK  
KA-DV5000  
KA-DV5000  
37  
80  
(40)  
Design and specifications are subject to change without notice.  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETWORK PACK  
User’s Guide  
KA-DV5000  
K
ACK  
C
P
K
R
KA-DV5000  
O
TW  
E
NETWORK  
P
P
S
O
W
P
E
U
R
P
L
Y
O
N
O
F
F
NETW  
PA  
ORK  
K
C
KA-DV5000  
VICTOR COMPANY OF JAPAN, LIMITED  
is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD.  
is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.  
© 2002 VICTOR COMPANY OF JAPAN, LIMITED  
LST0103-001A  
LST0103-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Inserting/removing CF memory card/LAN card  
When attaching Network Pack KA-DV5000 to DV Camcorder GY-DV5000, network related menus are added to the GY-DV5000 menu  
screen.  
The KA-DV5000 accepts the following cards for which operation has  
been confirmed: (As of August 2002)  
Operating voltage  
Current consumption Max. 500 mA (5 V)  
Wired LAN-card  
5 V or 3.3 V  
This User’s Guide explains settings for the network related menus, operation for recording streaming data to a CF (Compact Flash)  
memory card and operation for sending streaming data using a LAN card.When a LAN card is connected, menu screen settings for the  
Network Pack and GY-DV5000 can be operated from your PC.  
Lock release button  
Cover  
CF memory card or  
LAN card  
US:  
EA2900-117 (Revision C) (Name of manufacturer: Socket  
Communications, Inc)*1  
Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket  
Communications, Inc)*1  
Contents  
Asia:  
EA2906-194 (Revision C) (Name of manufacturer: Socket  
Communications, Inc)*1  
* Revision indicated on the upper right of package production label.  
Wireless LAN-card  
TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:  
TRENDware)  
WCF11 (Name of manufacturer: LINKSYS)*2  
TEW-201PC  
Introduction  
Inserting/removing CF memory card/LAN card ............................................................................................................................... 3  
LCD screen/viewfinder screen ......................................................................................................................................................... 4  
Section A  
Card slot  
Menu screen  
Menu screen structure ..................................................................................................................................................................... 5  
NETWORK PACK CONFIG menu screen items ............................................................................................................................... 6  
Setting the NETWORK PACK CONFIG menu screen....................................................................................................................... 8  
Returning the NETWORK PACK CONFIG menu screen to factory settings .................................................................................... 9  
TEW-202CF  
EJECT button  
Wireless Networker Compact Flash  
(Name of manufacture: SYMBOL TECHNOLOGIES INC.)  
FCCID: H9PLA4B7P  
TEW-PC202CF  
(Name of manufacture: TREND net)  
FCCID: MXF-F90120  
Low Power WLAN CARD  
(Name of manufacture: Socket Communications, INC)  
FCCID: H9PLA4137P  
AIR-PCM350  
(Name of manufacture: Cisco Systems)  
FCCID: LDK102040  
KA-DV5000  
Network settings  
Setting the NETWORK SET menu screen ...................................................................................................................................... 10  
NETWORK SET menu screen items ............................................................................................................................................... 11  
USER PAGE can be customized .................................................................................................................................................... 12  
Making network related settings .................................................................................................................................................... 13  
Detailed IP settings (LAN) .............................................................................................................................................................. 14  
Detailed network settings (WLAN) ................................................................................................................................................. 15  
CF (Compact Flash) card  
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)*1  
*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter  
*2: Use PCMCIA card TYPE 2 adapter  
Caution  
Recording on a CF card  
Make sure the power of GY-DV5000 is off when inserting/  
Formatting a CF memory card ....................................................................................................................................................... 17  
CF memory recording time............................................................................................................................................................. 17  
Recording video on a DV cassette tape and CF memory card ..................................................................................................... 18  
Recording video on a CF memory card only ................................................................................................................................. 19  
Recording playback signals of a DV cassette tape on a CF memory card ................................................................................... 20  
Deleting all clip files on a CF memory card ................................................................................................................................... 21  
removing a CF memory card/LAN card. Inserting/removing  
a card with the unit power on may damage the data storage  
section of the CF memory card or the card itself.  
Do not use the wireless LAN card continuously for more  
than 48 hours.  
For the latest operational check card, visit the website below  
or contact your JVC dealer.  
Movie clips  
Playing back video/audio recorded on a CF memory card ........................................................................................................... 22  
Protecting a clip file on a CF memory card .................................................................................................................................... 24  
Deleting a clip file on a CF memory card....................................................................................................................................... 25  
Playing back CF memory card clips on your PC ........................................................................................................................... 26  
Inserting card  
1.  
2.  
3.  
Turn off the GY-DV5000 power.  
Press and hold the lock release button and open the cover.  
Insert a card into the KA-DV5000 card slot. Then, close the cover.  
LAN card  
Sending video using LAN card while recording on a DV cassette tape ........................................................................................ 27  
Sending video using a LAN card (no DV cassette tape recording)............................................................................................... 28  
Sending playback signals of a DV cassette tape using a LAN card ............................................................................................. 29  
The cover may not close depending on the wired LAN card or the card shape. In this case, remove the cover by pressing section  
A and pulling on the cover.  
Network Pack Setup  
Controlling GY-DV5000/KA-DV5000 via LAN a card ...................................................................................................................... 30  
CAM & VTR CONTROL screen ...................................................................................................................................................... 31  
NETWORK SETUP screen.............................................................................................................................................................. 33  
PORT SETUP screen ...................................................................................................................................................................... 34  
ENCODE PARAMETERS screen .................................................................................................................................................... 35  
Streamcapture screen (Playing back video/audio using a PC and saving to file) ......................................................................... 36  
4.  
5.  
Turn on the GY-DV5000 power.  
Turn on the KA-DV5000 power.  
LCD screen  
Card status according to the inserted card type is displayed on  
the LCD screen/viewfinder screen. (page 4)  
Others  
C F  
Card status display  
: No card  
(The viewfinder will show the status in black and white.)  
Troubleshooting .............................................................................................................................................................................. 40  
Checking communication/connection............................................................................................................................................ 42  
Terminology .................................................................................................................................................................................... 43  
Memo  
When turning the power on, the card status  
display shown on left will flash during initial-  
ization.  
: LAN card  
e
Characters and symbols used in this instruction book  
Caution  
Memo  
Cautionary notes concerning operation of the unit  
Reference such as restrictions of features, etc.  
Reference page or item  
: CF memory card  
C F  
Removing card  
* In general, the names of products manufactured by other companies and mentioned in these  
instructions are trademarks or registered trademarks of these companies.  
Symbols like ™, ©, ®, etc., are not used in these instructions.  
1.  
2.  
Turn off the GY-DV5000 power, or turn off the KA-DV5000 power.  
Open the cover, press the EJECT button of KA-DV5000 and remove the card.  
3
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
LCD screen/viewfinder screen  
Menu screen  
Menu screen structure  
Information from Network Pack KA-DV5000 is displayed on the GY-DV5000 LCD screen/viewfinder screen.  
When attaching Network Pack KA-DV5000 to DV Camcorder GY-DV5000, NETWORK PACK CONFIG menu and MOVIE CLIP menu  
are added to the GY-DV5000 TOP MENU screen.  
MODE switch:When CAM-A or CAM-B is selected  
NETWORK SET menu screen  
NETWORK PACK CONFIG  
menu screen  
CF FULL!  
TOP MENU screen  
(page 10)  
[
]
NE TWORK S E T  
1
/
2
N ETWORK P A CK C ONF I G  
M ENU  
HO S T NAME  
DHCP  
.
.
CAMERA O P ERA T  
I
ON  
NET WORK S E T  
.
.
.
.
.
OF F  
.
CAMERA P ROC E SS  
.
.
ENCODE SE T  
MPEG R EC  
I
P
ADDRE S S  
.
.
AUD I O  
LCD V F  
TC UB  
OT HERS  
L E M AN AGE  
/
V
I
D EO .  
.
TR  
I
G
MOV  
I
E
CL  
I
P
SET .  
.
NET MAS  
.
.
.
.
K
/
.
.
MENU R ES E T  
PAGE BACK  
C AN CE L  
/
/
CL OCK  
.
.
.
GAT EWAY  
.
.
NEXT P AG E  
PAGE BAC K  
F
I
.
MENU A L L RE S E T  
CAN C E L  
NE TWOR K PACK C ONF I G  
EX  
.
.
I
T
qCard status displays  
wCF Memory card warning display  
Configuration screen of  
each item  
Displays CF memory card status and system errors.  
Display  
Description  
No card is inserted in Network Pack.  
Flashing display during initialization (after  
power on).  
* For details concerning warning displays, see page 40.  
MOVIE CLIP list screen  
ENCODE SET menu screen  
(page 22)  
MOV I  
E
C L I  
P
ENCODE S E T  
LAN card is inserted in Network Pack.  
.
MC 0 0 0 5  
02 03  
MC 0 0 0 6  
02 03  
MC 0 0 0 7  
02 03  
MC 0 0 0 8  
02 03  
a
s f  
02  
s f  
02  
s f  
02  
s f  
02  
R / W  
P I  
B I  
X
T
S
I
Z E  
3 2 0 x 2 4 0  
384Kb/s  
MAX  
09  
09  
10  
11  
:
0
0
:
:
:
:
00  
25  
55  
00  
/
/
RA T E  
MAX F RAME RAT E  
PAGE BACK  
.
a
/
R / W  
e
:
3
0
/
.
a
R / W  
(White display)  
:
1
0
/
/
.
a
/
R / W  
:
0
0
/
Video/audio data is being sent from LAN  
card.  
PAGE BACK  
e
*
Example display when there are clip  
files in the CF memory card  
(Red display)  
CF memory card is inserted in Network Pack.  
CF memory card is being recorded with data.  
C
F
When MODE switch:  
VTR is selected.  
(White display)  
MOVIE CLIP SET menu screen  
TOP MENU screen  
MOV I  
E
C L  
I
P
S ET  
MENU  
D EO .  
DEL ET E A L L  
F OR MAT  
CAN CE L  
C
F
AUD I O  
LCD V F  
TC UB  
OT HERS  
L E M AN AGE  
/
V
I
.
CAN CE L  
REPEAT  
/
.
.
/
/
CL OCK  
.
.
.
PL AY  
M
O
DE  
(Red display)  
.
.
PAGE BACK  
F
I
.
MENU A L L RE S E T  
CAN C E L  
NE TWOR K PACK C ONF I G  
.
.
MOV  
EX  
I
E
CL  
I
P
.
.
Card is inserted in Network Pack but trans-  
mission is not available.  
I
T
X
There is possibility of unit malfunction.  
Contact your nearest JVC dealer.  
Flashing display  
No colors will be shown on the viewfinder.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu screen  
indicates default factory setting.  
NETWORK PACK CONFIG menu screen items  
Menu screen  
NETWORK PACK CONFIG menu screen items  
Item  
Setting  
Description  
Item  
Setting  
Description  
MOVIE CLIP SET  
Displays the menu screen for CF memory card related settings such as formatting or delet-  
ing all recorded clip files.  
NETWORK SET  
Displays menu screen for network related settings such as DHCP, IP address, subnet mask,  
etc. ( page 11)  
DELETE ALL  
CANCEL  
Selecting EXECUTE and pressing the SHUTTER dial deletes all clip files on the CF memory  
EXECUTE  
card.  
ENCODE SET  
PIX SIZE  
Displays menu screen for setting video and audio compressions.  
Protected clip files are not deleted.  
320 × 240  
160 × 120  
Sets the video compression size.  
FORMAT  
CANCEL  
Selecting EXECUTE and pressing the SHUTTER dial starts formatting the card.  
All recorded clips are erased.  
320 × 240: Sets the image size to 320 × 240 pixels. (SIF)  
160 × 120: Sets the image size to 160 × 120 pixels. (QSIF)  
(1/4 image size of SIF.)  
EXECUTE  
PLAY MODE  
OFF  
Playback is performed from the specified clip file to the latest clip file and pauses at the  
specified clip file.  
VIDEO RATE  
Sets streaming speed (bps).  
REPEAT 1  
Continuously plays back the specified clip file.  
56K: MPEG4 24 kbps G726 16 kbps  
128K: MPEG4 104 kbps G726 16 kbps  
256K: MPEG4 232 kbps G726 24 kbps  
384K: MPEG4 352 kbps G726 32 kbps  
512K: MPEG4 472 kbps G726 40 kbps  
56K  
128K  
REPEAT  
Playback is performed continuously from the specified clip file to the latest clip file.  
PAGE BACK  
Pressing the SHUTTER dial returns to the NETWORK PACK CONFIG menu screen.  
256K  
384K  
512K  
MENU RESET  
CANCEL  
Selecting EXECUTE and pressing the SHUTTER dial returns NETWORK PACK CONFIG  
menu screen settings to the original factory settings.  
EXECUTE  
MAX FRAME  
RATE  
MAX  
MID  
MIN  
Sets the frame rate per second. Settings are as shown below.  
PAGE BACK  
Pressing the SHUTTER dial returns to the TOP MENU screen.  
(
): for E model  
PIX SIZE  
320 × 240 160 × 120  
MAX MID MIN MAX MID MIN  
PIX SIZE  
320 × 240 160 × 120  
MAX MID MIN MAX MID MIN  
NTSC 15 10 7.5 30 15 10  
PAL 12.5 25 12.5 12.5  
NTSC 15 10 7.5 30 15 10  
BIT RATE  
(bps)  
BIT RATE  
(bps)  
NTSC 7.5  
5
5
1
1
3
1
1
1
15 10 7.5  
128K  
56K  
512K  
384K  
256K  
PAL  
5
3
1
12.5 12.5  
10 7.5  
5
5
5
5
5
NTSC  
PAL  
12.5  
5
PAL  
NTSC 15 7.5  
PAL 12.5  
12.5  
5
5
5
5
25 12.5  
30 15 7.5  
25 12.5  
5
* The frame rates shown in the table are not  
guaranteed values.  
5
5
PAGE BACK  
MPEG REC  
Pressing the SHUTTER dial returns to the NETWORK PACK CONFIG menu screen.  
TRIG  
SPLIT  
OFF  
Selects the operation method for recording video data to a CF memory card or sending data  
to a remote media from a LAN card.  
TRIG: Pressing the VTR trigger button of GY-DV5000 starts operation. Use this setting  
when simultaneously recording to a DV tape.  
SPLIT: Use this setting when recording or transferring with CF memory card or LAN card  
only. Operation starts when pressing the VTR trigger button on the side of GY-  
DV5000.  
Memo  
When SPLIT is selected, the unit will not operate even when pressing the VTR trigger  
button on the front or on the lens.  
OFF: Recording will not be made to the CF memory card and streaming data from the  
LAN card will not be recorded/sent to the PC even when pressing the VTR trigger  
button of GY-DV5000.  
OVER  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu screen  
Setting the NETWORK PACK CONFIG menu screen  
Menu screen  
Returning the NETWORK PACK CONFIG menu screen to factory settings  
Menu screen settings can be made regardless of whether a card is inserted. Settings will be stored in the KA-DV5000 memory even  
when turning the power off.  
STATUS  
SHUTTER  
STATUS  
SHUTTER  
MENU  
MENU  
OPEN  
OPEN  
EDITSEARCH  
MONITOR  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
STATUS  
button  
SHUTTER  
dial  
1
1
/
8
ND  
64 ND  
STATUS  
SHUTTER  
dial  
STATUS  
button  
1
2
ND  
64 ND  
STATUS  
/
POWER  
SUPPL  
Y
POWER  
SUPPL  
SHUTTER  
MENU  
Y
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
POWER SUPPLY  
switch  
AUDIO  
LEVEL  
PULL  
OPEN  
AUDIO  
LEVEL  
FRONT  
REAR  
PULL  
OPEN  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
FRONT  
REAR  
CH-1  
CH-2  
CH-1  
AUDIO INPUT  
CH-2  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
MODE  
CH-1  
CH-2  
CH-1  
CH-2  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
MODE  
AUDIO INPUT  
NORMAL  
SPOT  
CH-1  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
L
A
VTR  
CAM  
NORMAL  
SPOT  
CH-1  
NETWORK  
PACK  
KA-DV5000  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
POWER  
VTR  
POWER  
VTR  
ON  
OFF  
ON  
OFF  
MODE  
VTR  
CAM  
MODE switch  
POWER switch  
NETWORK PACK CONFIG  
menu screen  
The NETWORK PACK CONFIG menu  
\ Settings are made by viewing the LCD screen or viewfinder screen.  
If OUTPUT CHAR of the OTHERS (1/2) menu screen is set to ON, the menu  
screen also appears on the monitor screen connected to the MONITOR OUT or  
Y/C OUT connector.  
1.  
2.  
Press the STATUS button for about 1 seconds to display the TOP MENU screen.  
screen will not appear during card initial-  
Check to see that the card status display has changed from a flashing to constant  
display.  
ization (flashing  
display).  
N ETWORK P A CK C ONF I G  
NET WORK S E T  
.
.
.
.
ENCODE SE T  
MPEG R EC  
TOP MENU screen  
TR  
I
G
1.  
2.  
Set the POWER switch of the GY-DV5000 and KA-DV5000 to ON.  
MOV  
I
E
CL  
I
P
SET .  
.
3.  
4.  
Turn the SHUTTER dial to select NETWORK PACK CONFIG and press the SHUT-  
TER dial.  
MENU R ES E T  
PAGE BACK  
E XE CU T E  
M ENU  
Set the MODE switch.  
CAMERA O P ERA T  
I
ON  
.
.
CAMERA P ROC E SS  
.
.
The NETWORK PACK CONFIG menu screen appears.  
Set to CAMwhen shooting a video. (Light the CAM indicator.)  
Set to "VTR" for VTR playback, clip file playback or DV signal recording. (Light  
the VTR indicator.)  
AUD I O  
LCD V F  
TC UB  
OT HERS  
L E M AN AGE  
/
V
I
D EO .  
.
.
.
/
.
.
MENU R ES E T  
/
/
C L OCK  
.
.
.
Turn the SHUTTER dial to set MENU RESET to EXECUTEand press the SHUT-  
.
.
F
I
.
TER dial.  
MENU A L L RE S E T  
CAN C E L  
3.  
4.  
Press the STATUS button for about 1 seconds. The TOP MENU screen appears.  
NE TWOR K P ACK C ONF I G  
EX  
.
.
When resetting the menu, MENU RESET..will appear at the bottom of the  
screen for about 5 seconds.  
I
T
Turn the SHUTTER dial, move the cursor (t) to NETWORK PACK CONFIG and  
press the SHUTTER dial.  
The NETWORK PACK CONFIG menu screen settings will return to the factory  
settings.  
The NETWORK PACK CONFIG menu screen appears.  
Cursor  
5.  
Select the item to set.  
Turn the SHUTTER dial, move the cursor to the desired item to set and press the  
SHUTTER dial.  
NETWORK PACK CONFIG  
menu screen  
The selected menu screen appears.  
N ETWORK P A CK C ONF I G  
NET WORK S E T  
.
.
.
When selecting MPEG REC or MENU RESET, the setting area flashes and the  
setting can be changed. Set the item according to step 7.  
When selecting NETWORK SET, the network related setting screen appears.  
.
ENCODE SE T  
MPEG R EC  
TR  
I
G
MOV  
I
E
CL  
I
P
SET .  
.
MENU R ES E T  
PAGE BACK  
C AN CE L  
(
page 10)  
6.  
7.  
Select an item within the menu screen.  
Turn the SHUTTER dial, move the cursor (t) to the desired item to set and press  
the SHUTTER dial.  
The setting area flashes and the setting can be changed.  
Setting  
NETWORK SET menu screen  
(page 10)  
Change the setting.  
Turn the SHUTTER dial to change the setting and press the SHUTTER dial.  
Flashing of the setting area stops and the new setting is confirmed.  
\ When changing multiple settings, repeat steps 6 and 7 above.  
ENCODE S E T  
P I  
B I  
X
T
S I Z E  
RAT E  
3 2 0 x 2 4 0  
3 8  
K
D
8.  
Return to the TOP MENU screen.  
4
M I  
MAX F R AME RAT E  
PAGE BACK  
Turn the SHUTTER dial, move the cursor (t) to PAGE BACK and press the SHUT-  
TER dial.  
9.  
When quitting menu screen setting and returning to the normal screen, perform  
one of the following operations.  
Press the STATUS button.  
Move the cursor (t) to EXIT in the TOP MENU screen and press the SHUTTER  
Setting  
dial.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network settings  
Setting the NETWORK SET menu screen  
Network settings  
[1/2] screen indicates default factory setting.  
NETWORK SET menu screen items  
When using a LAN card, network related settings for KA-DV5000 are made using NETWORK SET of the NETWORK PACK CONFIG  
menu. Settings will be stored in the KA-DV5000 memory even when turning the power off.  
Item  
Setting  
Description  
HOST NAME  
Displays the host name input setting screen. (Max. 63 alphanumerical characters)  
[Factory setting: none]  
STATUS  
SHUTTER  
DHCP  
OFF Select whether DHCP server is used.  
MENU  
ON  
OFF: Use this setting when using LAN connection rather than DHCP.  
When this setting is used, IP ADDRESS and NETMAST, GATEWAY must also be set.  
ON: Use this setting when using DHCP connection.  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
SHUTTER  
dial  
STATUS  
button  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
1
1
/
8
ND  
64 ND  
STATUS  
/
POWER  
SUPPL  
Y
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
POWER SUPPLY  
switch  
When using this setting, IP ADDRESS and NETMASK, GATEWAY are automatically set.  
* When DHCP is set to ON, WLAN ADHOC MODE cannot be set to AHDM or IBSS.  
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
POWER  
VTR  
IP ADDRESS  
NETMASK  
GATE WAY  
Displays the IP address setting screen.  
ON  
OFF  
When using LAN connection with DHCP set to OFF, this setting is required. Set a unique IP address.  
IP ADDRESS setting is not available when DHCP is set to ON.  
[Factory setting] 192.168.100.101]  
POWER switch  
Displays the subnet mask input screen.  
This setting is required when using LAN connection with DHCP set to OFF.  
NETMASK setting is not available if DHCP is set to ON.  
[Factory setting: 255.255.255.000]  
TOP MENU screen  
\ Settings are made by viewing the LCD screen or viewfinder screen.  
If OUTPUT CHAR of the OTHERS (1/2) menu screen is set to ON, the menu screen  
also appears on the monitor screen connected to the MONITOR OUT or Y/C OUT  
connector.  
M ENU  
CAMERA O P ERA T  
I
ON  
.
.
Displays the gateway address input screen.  
GATEWAY setting is not available when DHCP is set to ON.  
[Factory setting: 192.168.100.254]  
CAMERA P ROC E SS  
.
.
AUD I O  
LCD V F  
TC UB  
OT HERS  
L E M AN AGE  
/
V
I
D EO .  
.
/
.
.
/
/
C L OCK  
.
.
.
.
.
F
I
.
NEXT PAGE  
PAGE BACK  
Pressing the SHUTTER dial displays the NETWORK SET [2/2] menu screen.  
Pressing the SHUTTER dial returns to the NETWORK PACK CONFIG menu screen.  
MENU A L L RE S E T  
CAN C E L  
NE TWOR K PACK C ONF I G  
EX  
.
.
Display the NETWORK SET menu screen  
I
T
1.  
2.  
Turn on the GY-DV5000 and KA-DV5000 power.  
[2/2] screen  
Item  
Setting  
Description  
Check to see that the card status display has changed from a flashing to constant  
display.  
NETWORK PACK CONFIG  
menu screen  
RTSP  
1
:
The screen for setting RTSP and HTTP port numbers appears.  
Normally, the unit can be used without changing the factory settings.  
N ETWORK P A CK CONF I G  
8554 If there are port restrictions for the LAN environment of your PC, consult your network administrator.  
* When changing a port number, refer to 5-1. Connecting with Camcorderof the Streamproducer”  
3.  
4.  
Press the STATUS button for about 1 seconds to display the TOP MENU screen.  
NET WORK S E T  
.
.
.
:
.
ENCODE SE T  
MPEG R EC  
TR  
I
G
32767 Users Guide of the network distribution software to change settings.  
Turn the SHUTTER dial, move the cursor (t) to NETWORK PACK CONFIG and  
press the SHUTTER dial.  
MOV  
I
E
CL  
I
P
SET .  
.
* Do not use the same port numbers for RTSP and HTTP.  
* When a port number is changed, switch the power of the GY-DV5000 off once, and then switch it  
MENU R ES E T  
PAGE BACK  
C AN CE L  
HTTP  
1
:
80  
on again.  
The NETWORK PACK CONFIG menu screen appears.  
:
5.  
Turn the SHUTTER dial, move the cursor (t) to NETWORK SET and press the  
SHUTTER dial.  
32767  
WLAN AD HOC  
MODE  
OFF Wireless LAN setting  
AHDM OFF:  
IBSS AHDM/IBSS: Use this setting when performing communication in AD HOC mode with a PC con-  
The NETWORK SET [1/2] menu screen will appear.  
The NETWORK SET menu screen is structured by 2 pages.  
Use this setting when performing communication via access point.  
NETWORK SET [1/2]  
menu screen  
nected with a wireless LAN card. ( page 15)  
* When this item is set to AHDM or IBSS, DHCP cannot be set to ON.  
[
]
\ Select NEXT PAGE and press the SHUTTER dial to display the NETWORK SET  
[2/2] menu screen.  
NE TWORK S E T  
1
/
2
WLAN ESS-ID  
Displays the wireless LAN ESS-ID input setting screen (Max. 32 alphanumerical characters)  
HO S T NAME  
DHCP  
.
.
OF F  
I
P
ADDRE S S  
.
.
WLAN WEP  
KEY  
When encrypting data, set the WEP KEY (10 characters consisting or letters a ~ f and numbers).  
Must be compatible with access point authentication for the use of this item.  
Select PAGE BACK in the NETWORK SET [2/2] menu screen and press the SHUT-  
TER dial to return to the NETWORK SET [1/2] menu screen.  
NET MAS K .  
.
.
GAT EWAY  
.
NEXT P AG E  
PAGE BAC K  
WLAN CH  
1CH Wireless LAN channel setting  
2CH  
6.  
7.  
Set DHCP to ON or OFF in the NETWORK SET [1/2] menu screen.  
:
Items other than DHCP are set in the individual setting screen. (page 11)  
14CH  
USER NAME  
PASS WORD  
Displays the user name input setting screen. (Max. 8 alphanumerical characters)  
Used when controlling GY-DV5000 via LAN card. (page 30)  
[Factory setting: jvc]  
To return to the normal screen after completing setting, perform one of the follow-  
ing operations.  
NETWORK SET [2/2]  
menu screen  
Press the STATUS button  
Displays the password input setting screen. (Max. 8 alphanumerical characters)  
Used when controlling GY-DV5000 via LAN card. (page 30)  
[Factory setting: ka-dv5k] (Password is hidden)  
Select PAGE BACK to return to the TOP MENU screen. Select EXIT in the TOP  
MENU screen and press the SHUTTER dial.  
[
]
NE TWORK S E T  
2
/
2
.
.
.
.
R TS P  
H T TP  
OC MOD E  
OF F  
2CH  
H
-
WLAN AD  
WLAN E SS  
WLAN CH  
I
D .  
.
Caution  
Keep a memo of the password since it is only displayed during the actual setting. The password  
will be hidden using asterisks (*) when accessing the password menu screen again.  
When performing MENU RESET, ka-dv5k will return to its factory settings. (page 9)  
U SE R NAME  
.
.
.
PASS WOR D .  
PAGE BAC K  
PAGE BACK  
Pressing the SHUTTER dial returns to the NETWORK SET [1/2] menu screen.  
11  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network settings  
USER PAGE can be customized as desired.  
USER PAGE can be customized  
Network settings  
Network related settings are made in the individual input setting screens.  
Making network related settings  
USER PAGE created on a PC is uploaded by FTP.  
Here, USER NAME is set as an example. Other settings are also made in the same manner.  
1.  
2.  
Set the unit so that NETWORK SETUP can be displayed. (page 30)  
STATUS  
Create HTML on the PC using a commercially available HTML editor, etc.  
SHUTTER  
MENU  
Save the created HTML file under the name of index.html.  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
SHUTTER  
dial  
STATUS  
button  
1
1
/
8
ND  
64 ND  
STATUS  
.3 5600K  
.4 5600K  
3.  
Use a commercially available FTP program on the PC to upload index.html created in step 2 above to KA-DV5000.  
FTP program settings  
/
POWER  
SUPPL  
Y
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
IP Adress  
:
:
:
:
192.168.100.101 (Input the actual IP address used.)  
POWER  
VTR  
ON  
OFF  
Remort Port  
USER ID  
21  
html  
None  
PASSWORD  
\ It is also possible to upload link pages from index.html, images, etc.  
USER NAME input setting screen  
Example: Changing USER NAME from jvc to jvc-1234  
Caution  
Currently inputted number of characters/  
max.number of characters  
\ Select USER NAME in the NETWORK SET [2/2] menu screen and press the  
SHUTTER dial.  
Make sure the uploaded files do not exceed 100KB in total.  
US ER NA ME  
The HTML display will fit properly on the screen when creating at a size of about 500 X 360 pixels.  
3
8
/
The USER NAME input setting screen appears.  
j
v c  
1.  
Characters are selected from the character selection area on the bottom of the  
screen.  
Turn the SHUTTER dial to flash _in the character selection area and press the  
SHUTTER dial.  
ab c d e  
f
g
h i  
j
k
l
m n o p q  
r
BS  
s
t
u
v
_
wx y z 0 1 2 3 4 5 6 7  
8
9
¯ .  
The setting changes to jvc_and the following digit of the setting area flashes.  
Setting area  
Character  
selection area  
2.  
3.  
Turn the SHUTTER dial to select 1in the character selection area and press the  
SHUTTER. dial.  
BS: Backspace (delete previous character  
)
The setting changes to jvc_1and the following digit of the setting area flashes.  
: Return to menu screen  
Repeat the above step to set jvc_1234in the setting area.  
US ER NA ME  
\ To delete or edit set characters, select BSwithin the character selection area and  
4
8
/
press the SHUTTER dial.  
_
g
j
v c  
The previous character will be deleted. The character on the left will be deleted each  
time this operation is repeated.  
\ The currently inputted number of characters and the maximum number of characters  
ab c d e  
wx y z 0 1 2 3 4 5 6 7  
f
h i  
j
k
l
m n o p q  
r
s
s
s
t
u
v
8
are displayed on the upper right of the screen.  
_
8
9
¯
.
BS  
4.  
When completed, select “ ” within the character selection area and press the  
SHUTTER dial.  
U S ER NA ME  
1
NETWORK SET [2/2] menu screen returns in the LCD or viewfinder.  
5
/
_
g
j
v c  
ab c d e  
wx y z 0 1 2 3 4 5 6 7  
f
h i  
j
k
l
m n o p q  
r
BS  
t
u
v
8
_
¯
8
9
.
U S ER NA ME  
8
/
_
j
v c 1 2 3 4  
ab c d e  
wx y z 0 1 2 3 4 5 6 7  
f
g
h i  
j
k
l
m n o p q  
r
BS  
t
u
v
_
¯
8
9
.
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network settings  
Example of IP address and subnet mast settings when using LAN is shown below.  
Detailed IP settings (LAN)  
Network settings  
Example of network settings when using wireless LAN is shown below.  
Detailed network settings (WLAN)  
Operation is only guaranteed for Windows 2000, Windows XP Home Edition or Windows XP Professional.  
Internet Explorer 5.0 or later  
Operation is only guaranteed for Windows 2000, Windows XP Home Edition or Windows XP Professional.  
Internet Explorer 5.0 or later  
Windows Media Player 7.01 or later  
Windows Media Player 7.01 or later  
1. For communication with PC without returning access point (Ad hoc mode)  
1. For 1:1 communication between PC and GY-DV5000/KA-DV5000  
OPEN  
EDITSEARCH  
* Do not perform encryption of the  
MONITOR  
FILTER  
3200K  
1
2
5600K  
1
/
8
ND  
.3 5600K  
.4 5600K  
1
/
6
4
N
D
POWER  
SUPPL  
S
T
A
T
U
S
Y
S
H
U
T
T
E
R
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
AUTO  
I
    R
I
  S
FULL  
A
U
T
O
BLAC  
K
LOLU  
X
CH-1  
CH-2  
CH-1  
A
CHA-U1DIO SELE  
CH-2  
MODE  
U
D
I
O
I
N
P
U
T
OPEN  
BN  
A
C
K
L
L
S
T
R
R
E
H
VTR  
NOO  
 R
 M
 N
M
 A
 L
C
SPOT  
L
COM  
M
P
R
E
S
S
CAM  
M
A
U
T
O
EDITSEARCH  
MONITOR  
NETWORK  
P
A
CK  
FILTER  
KA-DV5000  
1
2
3200K  
5600K  
1
1
/
8
ND  
.3 5600K  
.4 5600K  
/
6
4
N
D
POWER  
SUPPL  
Y
SHUTTER STATUS  
MENU  
wireless LAN.  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
POWER  
VTR  
AUDIO  
LEVEL  
PULL  
ON  
OFF  
F
R
R
E
O
A
N
R
T
OPEN  
AUT  
T
O
IR  
IS  
FUL  
L
L
A
U
T
O
BLA  
A
C
K
LOL  
L
UX  
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
L
COMPR  
ES  
S
CAM  
M
A
U
T
O
NETWORK  
P
A
C
K
KA-DV5000  
10/100 BASE-T cross cable  
POWER  
VTR  
ON  
OFF  
*
*
For the PC settings when using a LAN card,  
refer to the instruction manual included with  
the LAN card.  
Set a unique number to avoid doubling  
Set a unique number to avoid doubling  
Up to 3 clients can access at the same time.  
DHCP  
OFF  
WLAN AD HOC MODE ON  
WLAN ESS ID  
WLAN CH  
IP ADDRESS  
NETMASK  
abcdef  
2
192. 168. 100. 101  
255. 255. 255. 000  
PROXY SERVER  
DHCP SERVER  
IP ADDRESS  
NETMASK  
OFF  
OFF  
DHCP OFF  
PROXY SERVER NO USE  
DHCP SERVER NO USE  
IP ADDRESS 192. 168. 100. 100  
192. 168. 100. 100  
255. 255. 255. 000  
IP ADDRESS 192. 168. 100. 101  
NETMASK 255. 255. 255. 000  
NETMASK  
255. 255. 255. 000  
Set the same network group  
Set the same network group  
PC wireless LAN driver settings  
NetworkType  
ESS ID  
802. 11 Ad Hoc Mode  
abcdef  
Channel  
Encryption Mode  
2
2. For communication between PC and multiple GY-DV5000/KA-DV5000  
Open System  
* For the PC settings when using a LAN card, refer to  
the instruction manual included with the LAN card.  
DHCP OFF  
IP ADDRESS 192. 168. 100. 101  
NETMASK  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
1
1
/
8
ND  
/
6
4
N
D
POWER  
SUPPL  
S
T
A
T
U
S
Y
S
H
U
T
T
E
R
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
AUTO  
I
    R
I
  S
FULL  
A
U
T
O
BLA  
A
C
K
LOLU  
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
A
255. 255. 255. 000  
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
L
COM  
M
P
R
E
S
S
CAM  
M
A
U
T
O
NETWORK  
P
A
C
K
KA-DV5000  
POWER  
VTR  
ON  
OFF  
Cautionary items concerning Wireless LAN (WLAN)  
For the WLAN ESS ID, input the values of ESSID set in:  
Ad hoc mode: PC of other party  
Infrastructure: Access point  
PROXY SERVER NO USE  
DHCP SERVER NO USE  
IP ADDRESS 192. 168. 100. 100  
WLAN AD HOC MODE  
DHCP OFF  
IP ADDRESS 192. 168. 100. 102  
NETMASK  
255. 255. 255. 000  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
When IBSS is set, the NETWORK MODE setting of the wireless LAN card on the PC side must be set to 802.11 Adhoc.  
When AHDM is set, the NETWORK MODE setting of the wireless LAN card on the PC side must be set to Adhoc. Depending  
on the LAN card on the PC side, only 802.11 Adhoc mode may be available.  
1
1
/
8
ND  
/
6
4
N
D
POWER  
SUPPL  
S
T
A
T
U
S
Y
S
H
U
T
T
E
R
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
AUTO  
I
    R
I
  S
FULL  
A
U
T
O
BLAC  
K
LOLU  
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
L
COM  
M
P
R
E
S
S
CAM  
M
A
U
O
NETWORK  
P
A
CK  
KA-DV5000  
NETMASK  
255. 255. 255. 000  
POWER  
VTR  
ON  
OFF  
WLAN CH is the wireless frequency band used for communication. If there is an access point, adapter, etc., using the  
same band in the proximity, there may be a hindrance in the communication and may reduce throughput or the quality of  
communication. When setting, check the settings of surrounding access points, etc., to avoid doubling.  
Hub  
DHCP OFF  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
1
1
/
8
ND  
.3 5600K  
.4 5600K  
/
6
4
N
D
POWER  
SUPPL  
S
T
A
T
U
S
Y
S
H
U
T
T
E
R
IP ADDRESS 192. 168. 100. 103  
NETMASK 255. 255. 255. 000  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
AUT  
T
O
I
    R
I
  S
FULL  
A
U
T
O
BLAC  
K
LOLU  
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
A
L
COM  
M
P
R
E
S
S
CAM  
M
A
U
O
NETWORK  
2417 2427 2437 2447 2457 2467  
2422 2432 2442 2452 2462 2472  
P
A
C
K
KA-DV5000  
Frequency bands (ISM bands) and channels  
(IEEE803.11b standard)  
POWER  
VTR  
ON  
OFF  
2412  
2484  
Approx.  
11MHz  
Center  
frequency  
10/100 BASE-T straight cable  
1ch  
2ch  
3ch  
4ch  
5ch  
6ch  
7ch  
8ch  
9ch  
10ch  
11ch  
12ch  
13ch  
N. America : FCC / 2.412~2.462GHz (11 channels)  
Caution  
Set a unique number to avoid doubling  
Europe  
Japan  
France  
Spain  
: CE ETSI / 2.412~2.472GHz (13 channels)  
: 2.412~2.4835GHz (14 channels)  
: 2.457~2.472GHz (4 channels)  
DHCP OFF  
IP ADDRESS 192. 168. 100. 104  
NETMASK 255. 255. 255. 000  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
1
1
/
8
ND  
IP ADDRESS 192. 168. 100. XXX  
NETMASK  
/
6
4
N
D
POWER  
SUPPL  
: 2.457~2.462GHz (2 channels)  
S
T
A
T
U
S
Y
S
H
U
T
T
E
R
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
AUT  
T
O
I
IR  
  S
FULL  
A
U
T
O
BLACK  
LOLU  
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
A
L
COM  
M
PR  
ESS  
CAM  
M
A
U
T
O
NETWORK  
P
A
C
K
KA-DV5000  
POWER  
VTR  
255. 255. 255. 000  
ON  
OFF  
Since adjacent channels causes signal interference, channels  
are normally spaced 5 channels apart.  
Set the same network group  
14ch  
1ch frequency band  
6ch frequency band  
11ch frequency band  
14chchfrfereqqueuenncycybbaanndd  
OVER  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network settings  
Detailed network settings (WLAN)  
Recording on a CF card  
Formatting a CF memory card  
When an unformatted CF memory card is inserted and the GY-DV5000 power is turned on, NO CF FORMAT!appears in the LCD  
2. For communication with PC via access point (Infrastructure mode)  
screen/viewfinder screen.  
DHCP  
OFF  
WLAN AD HOC MODE OFF  
STATUS  
SHUTTER  
WLAN ESS ID  
WLAN CH  
abcdef  
2
MENU  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
SHUTTER  
dial  
STATUS  
button  
1
1
/
8
ND  
64 ND  
STATUS  
.3 5600K  
.4 5600K  
/
IP ADDRESS  
NETMASK  
192. 168. 100. 101  
255. 255. 255. 000  
POWER  
SUPPL  
Y
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
DHCP  
OFF  
WLAN AD HOC MODE OFF  
POWER  
VTR  
ON  
OFF  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K 1/ ND  
.3 5600K  
.4 5600K 1/64 ND  
8
WLAN ESS ID  
WLAN CH  
abcdef  
2
POWER  
SUPPL  
S
T
A
T
U
S
Y
S
H
U
T
T
E
R
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
AUTO  
O
I
    R
I
  S
FULL  
A
U
T
O
BLAC  
K
LOLU  
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
L
COMP  
RE  
S
S
CAM  
M
A
U
T
O
NETWORK  
P
A
C
K
KA-DV5000  
POWER  
VTR  
ON  
OFF  
IP ADDRESS  
NETMASK  
192. 168. 100. 102  
255. 255. 255. 000  
1.  
2.  
Press the STATUS button for about 1 seconds to display the TOP MENU screen.  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
3200K  
1
2
5
6
0
0
K
1
/
8
ND  
.3 5600K  
.4 5600K 1/64 ND  
POWER  
SUPPL  
Y
SHUTTER STATUS  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
C F  
AUT  
T
O
I
I
  S
FULL  
A
U
T
O
BLA  
A
CK  
LOLU  
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
Use the SHUTTER dial to select NETWORK PACK CONFIG menu screen ¥  
L
COMP  
R
E
S
S
CAM  
M
A
U
O
NETWORK  
NO CF FORMAT!  
P
A
C
K
KA-DV5000  
POWER  
VTR  
ON  
OFF  
MOVIE CLIP SET menu screen.  
3.  
Set FORMAT in the MOVIE CLIP SET menu screen to EXECUTEand press the  
SHUTTER dial.  
STATION  
ESS ID abcdef  
Channel 2  
The formatting begins. During formatting, FORMATappears on the screen.  
NETWORK PACK CONFIG  
menu screen  
4.  
5.  
When formatting is completed, to the MOVIE CLIP SET menu screen returns.  
The FORMAT setting will return to CANCEL.  
Encryption Mode Open System  
N ETWORK P A CK C ONF I G  
NET WORK S E T  
.
.
.
.
To return to the NETWORK PACK CONFIG menu screen, select PAGE BACK and  
press the SHUTTER dial.  
ENCODE SE T  
PROXY SERVER  
DHCP SERVER  
IP ADDRESS  
NETMASK  
NO USE  
NO USE  
192. 168. 100. 100  
255. 255. 255. 000  
MPEG R EC  
TR  
I
G
MOV  
I
E
CL  
I
P
SET .  
.
MENU R ES E T  
PAGE BACK  
C AN CE L  
To return to the normal screen, press the STATUS button.  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
3200K  
1
2
5
6
0
0
K
1
/
8
ND  
.
3
5
6
0
0
K
.
4
5
6
0
0
K
1
/
6
4
N
D
POWER  
SUPPL  
Y
SHUTTER STATUS  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
AUT  
T
O
I
    R
I
  S
FUL  
L
L
AUTO  
BLAC  
K
LOLU  
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
L
COMP  
R
E
S
S
CAM  
M
A
U
T
O
NETWORK  
CK  
KA-DV5000  
P
A
POWER  
VTR  
ON  
OFF  
PC wireless LAN driver settings  
CF memory recording time  
NetworkType  
ESS ID  
Infrastructure  
abcdef  
DHCP  
OFF  
WLAN AD HOC MODE OFF  
Estimated recording time of CF memory cards is shown below:  
Channel  
2
MOVIE CLIP SET  
menu screen  
WLAN ESS ID  
WLAN CH  
abcdef  
2
Encryption Mode  
Open System  
BIT RATE  
*
For the PC settings when using a LAN card,  
refer to the instruction manual included with  
the LAN card.  
CF memory  
MOV I  
E
C L  
I
P
S ET  
IP ADDRESS  
NETMASK  
192. 168. 100. 103  
255. 255. 255. 000  
DEL ET E A L L  
F OR MAT  
CAN CE L  
card size  
384kbps  
3min.  
256kbps  
5min.  
128kbps ~ 56kbps  
10min. or more  
20min. or more  
40min. or more  
80min. or more  
120min. or more  
160min. or more  
E X E CU T E  
OF F  
PL AY MODE  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
3200K  
1
2
5
6
0
0
K
1
/
8
ND  
PAGE  
B
CK  
.
3
5
6
0
0
K
A
.
4
5
6
0
0
K
1
/
6
4
N
D
POWER  
SUPPL  
S
T
A
T
U
S
Y
S
H
U
T
T
E
R
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
AUDIO  
LEVEL  
PULL  
F
R
R
E
O
A
N
R
T
OPEN  
16MByte  
32MByte  
64MByte  
128MByte  
192MByte  
256MByte  
AUT  
T
O
I
IR  
  S
FULL  
A
U
T
O
BLAC  
K
LOL  
L
U
X
CH-1  
CH-2  
CH-1  
UDIO INPUT  
UDIO SELECT  
CH-1 CH-2  
CH-2  
MODE  
A
A
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
VTR  
L
COMP  
R
E
S
S
CAM  
M
A
U
T
O
NETWORK  
P
A
C
K
KA-DV5000  
POWER  
VTR  
ON  
OFF  
Network Type (Ad Hoc/Infrastructure)  
Make sure ESS ID and Channel settings  
are the same.  
7min.  
11min.  
22min.  
44min.  
66min.  
88min.  
DHCP  
OFF  
F ORMAT  
15min.  
30min.  
46min.  
61min.  
WLAN AD HOC MODE OFF  
Set a unique number to avoid doubling  
WLAN ESS ID  
WLAN CH  
abcdef  
2
Set to EXECUTE  
Flashing display during  
formatting  
IP ADDRESS  
NETMASK  
192. 168. 100. XXX  
255. 255. 255. 000  
IP ADDRESS  
NETMASK  
192. 168. 100. 104  
255. 255. 255. 000  
Set the same network group  
MOVIE CLIP SET  
menu screen  
Caution  
MOV I  
E
CL  
I
P
S ET  
The actual recording time may differ from the estimate recording time shown above  
depending on the recording subject and movement.  
DEL ET E A L L  
F OR MAT  
CAN CE L  
Memo  
CAN CE L  
REPEAT  
PL AY MODE  
PAGE BACK  
For network settings and LAN card driver settings, refer to the respective instruction manuals.  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording on a CF card  
Recording video on a DV cassette tape and CF memory card  
Recording on a CF card  
Recording video on a CF memory card only  
STATUS  
STATUS  
SHUTTER  
SHUTTER  
MENU  
MENU  
OPEN  
OPEN  
EDITSEARCH  
MONITOR  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
1
2
1
1
/
8
ND  
STATUS button  
ND  
64 ND  
STATUS  
/64  
ND  
STATUS button  
POWER  
SUPPL  
Y
POWER  
SUPPL  
STATUS  
SHUTTER  
MENU  
Y
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
L
C
D
B
R
I
G
H
T
DISPLAY  
POWER SUPPLY  
switch  
O
N
O
F
F
POWER SUPPLY  
switch  
AUDIO  
LEVEL  
PULL  
OPEN  
AUDIO  
LEVEL  
FRONT  
REAR  
PULL  
A
U
T
O
I
R
I
S
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
OPEN  
CH-1  
CH-2  
FRONT  
REAR  
CH-1  
CH-2  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
MODE  
AUDIO INPUT  
CH-1  
CH-2  
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-1  
CH-2  
VTR  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
L
A
UTO  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CAM  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
CH-2  
NETWORK  
PACK  
KA-DV5000  
L
A
UTO  
CAM  
MANUAL  
NETWORK  
PACK  
KA-DV5000  
OFF ZEBRA  
SKIN  
AREA  
AUTO  
WHITE  
ON  
POWER  
VTR  
ON  
OFF  
ACCU  
FOCUS  
POWER  
VTR  
ON  
OFF  
VTR  
AUDIO  
LEVELE CH-1  
5
MODE  
MODE  
VTR  
VTR  
MODE switch  
VTR trigger button  
CAM  
POWER switch  
CAM  
MODE switch  
VTR trigger button  
VTR trigger button  
POWER switch  
NO CF FORMAT!will appear if the in-  
serted CF memory card is not formatted.  
Format the card in the MOVIE CLIP SET  
menu screen. (page 17)  
NO CF FORMAT!will appear if the in-  
serted CF memory card is not formatted.  
Format the card in the MOVIE CLIP SET  
1.  
2.  
Insert a CF memory card into the Network Pack.  
Turn on the GY-DV5000 and KA-DV5000 power.  
1.  
2.  
Insert a CF memory card into the Network Pack.  
Turn on the GY-DV5000 and KA-DV5000 power.  
Check to see that the C F display appears on the LCD screen/viewfinder screen.  
(When the power is turned on, display will flash during initialization.)  
Check to see that the C F display appears on the LCD screen/viewfinder screen.  
(When the power is turned on, display will flash during initialization.)  
menu screen. ( page 17)  
LCD screen  
LCD screen  
3.  
4.  
5.  
Insert a recordable DV cassette tape.  
3.  
4.  
Set the MODE switch to CAM. (Light the CAM indicator.)  
Set the MODE switch to CAM. (Light the CAM indicator.)  
Set the NETWORK PACK CONFIG menu screen.  
q Set MPEG REC to SPLIT.  
C F  
C F  
Set the NETWORK PACK CONFIG menu screen.  
q Set MPEG REC to TRIG.  
w Set the video/audio compression in the ENCODE SET menu screen.  
(
page 6)  
w Set the video/audio compression in the ENCODE SET menu screen.  
e When completed with settings, press the STATUS button to return to the  
(
page 6)  
normal screen.  
e When completed with settings, press the STATUS button to return to the normal  
C F  
: Red display during  
recording  
screen.  
5.  
Press the VTR trigger button on side panel of GY-DV5000 to start recording stream-  
ing data on the CF memory card.  
C F  
: Red display during  
recording  
: Initializing  
6.  
Press the VTR trigger button on GY-DV5000 to start recording on the DV cassette  
tape as well as video/audio streaming data on the CF memory card.  
During CF memory card recording, C F display will light red.  
: Initializing  
C F  
During recording,  
display will light red.  
NETWORK PACK CONFIG  
menu screen  
NETWORK PACK CONFIG  
menu screen  
6.  
7.  
8.  
To stop recording, press the VTR trigger button on side panel.  
N ETWORK P A CK C ONF I G  
NET WORK S E T  
.
.
.
7.  
8.  
9.  
To stop recording, press the VTR trigger button.  
To resume recording, press the VTR trigger button on side panel once more.  
N ETWORK P A CK C ONF I G  
.
ENCODE SE T  
MPEG R EC  
NET WORK S E T  
.
.
.
S P L I T  
.
ENCODE SE T  
MPEG R EC  
MOV  
I
E
CL  
I
P
SET .  
.
To resume recording, press the VTR trigger button once more.  
To end recording, press the VTR trigger button on side panel.  
TR  
I
G
MENU R ES E T  
PAGE BACK  
MOV  
I
E
CL  
I
P
SET .  
.
* Before turning off the power, check to make sure the C F indicator on the LCD  
MENU R ES E T  
PAGE BACK  
To end recording, press the VTR trigger button.  
* Before turning off the power, check to make sure the C F indicator on the LCD  
screen is white.  
screen is white.  
Turning the power off when the C F indicator is red will damage the recorded clip  
file.  
C F  
Turning the power off when the  
file.  
indicator is red will damage the recorded clip  
Set to SPLIT  
ENCODE SET menu screen  
Memo  
Set to TRIG  
ENCODE SET menu screen  
Every time recording is performed, the recorded event is stored in the clip list of  
the CF memory card.  
Memo  
Stored contents of clip list: Clip number and date/time when recording was started.  
When the DV cassette tape has reached the end during recording, CF memory  
LCD screen  
LCD screen  
All events can be played back on the MOVIE CLIP screen. ( page 22)  
card recording will also stop.  
The CF memory card remaining warning is displayed on the LCD screen/viewfinder  
Every time recording is performed, the recorded event is stored in the clip list of  
the CF memory card.  
screen. ( page 40)  
C F  
C F  
When MPEG REC is set to SPLIT, recording is performed only when the VTR  
trigger button on the side is pressed.The VTR trigger buttons on the front and on  
the lens are disabled.  
Stored contents of clip list: Clip number and date/time when recording was started.  
All events can be played back on the MOVIE CLIP screen. ( page 22)  
The CF memory card remaining warning is displayed on the LCD screen/viewfinder  
screen. ( page 40)  
CF memory card  
remaining warning  
CF memory card  
remaining warning  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording on a CF card  
Recording playback signals of a DV cassette tape on a CF memory card  
Recording on a CF card  
Deleting all clip files on a CF memory card  
MOVIE CLIP of the NETWORK PACK CONFIG menu screen is used to delete all clips on a CF memory card.  
STATUS  
SHUTTER  
STATUS  
SHUTTER  
BLANK SEARCH REW  
STOP  
FF  
PLAY  
STILL  
MENU  
MENU  
OPEN  
EDITSEARCH  
MONITOR  
OPEN  
EDITSEARCH  
FILTER  
FILTER  
MONITOR  
SHUTTER  
dial  
STATUS  
button  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
1
1
/
8
ND  
64 ND  
STATUS  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
/
STATUS button  
1
1
/8  
ND  
64 ND  
STATUS  
POWER  
SUPPL  
Y
/
SHUTTER  
MENU  
POWER  
SUPPL  
Y
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
POWER SUPPLY  
switch  
L
C
D
B
R
I
G
H
T
DISPLAY  
POWER SUPPLY  
switch  
AUDIO  
LEVEL  
O
N
O
F
F
PULL  
OPEN  
FRONT  
REAR  
AUDIO  
LEVEL  
PULL  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
OPEN  
CH-1  
CH-2  
FRONT  
REAR  
MODE  
AUDIO INPUT  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
CH-1  
CH-2  
VTR  
CH-1  
CH-2  
NORMAL  
SPOT  
CH-1  
MODE  
AUDIO INPUT  
L
A
CAM  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NETWORK  
PACK  
KA-DV5000  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
PLAY button  
OFF ZEBRA  
SKIN  
AREA  
AUTO  
WHITE  
ON  
POWER  
VTR  
ON  
OFF  
ACCU  
FOCUS  
POWER  
VTR  
ON  
OFF  
VTR  
AUDIO  
LEVELE CH-1  
5
MODE  
VTR  
POWER switch  
MODE switch  
VTR trigger button  
CAM  
VTR trigger button  
POWER switch  
NETWORK PACK CONFIG  
menu screen  
1.  
2.  
Insert a CF memory card into the Network Pack.  
Turn on the GY-DV5000 and KA-DV5000 power.  
NO CF FORMAT!will appear if the in-  
serted CF memory card is not formatted.  
Format the card in the MOVIE CLIP SET  
1.  
2.  
Insert an already recorded CF memory card.  
Turn on the GY-DV5000 and KA-DV5000 power.  
N ETWORK P A CK C ONF I G  
C F  
Check to see that the  
display appears on the LCD screen/viewfinder screen.  
NET WORK S E T  
.
.
.
Check to see that the C F display appears on the LCD screen/viewfinder screen.  
(The mark will flash when first turning on the power or during initialization.)  
menu screen. ( page 17)  
.
ENCODE SE T  
MPEG R EC  
(When the power is turned on,  
display will flash during initialization.)  
TR  
I
G
MOV  
I
E
CL  
I
P
SET .  
.
MENU R ES E T  
PAGE BACK  
C AN CE L  
3.  
4.  
5.  
Insert the recorded DV cassette tape.  
3.  
4.  
Press the STATUS button for about 1 seconds to display the TOP MENU screen.  
Set the MODE switch to VTR. (Light the VTR indicator.)  
Use the SHUTTER dial to select NETWORK PACK CONFIG menu screen ¥  
MOVIE CLIP SET menu screen.  
CF memory card remaining warning  
LCD screen  
Set the NETWORK PACK CONFIG menu screen.  
q Set MPEG REC to TRIG. When MPEG REC is set to SPLIT, recording is  
performed only when the VTR trigger button on the side is pressed.  
w Set the video/audio compression in the ENCODE SET menu screen.  
5.  
Set DELETE ALL in the MOVIE CLIP SET menu screen to EXECUTEand press  
the SHUTTER dial.  
MOVIE CLIP SET  
menu screen  
Deletion is executed and DELETE..appears flashing on the screen.  
C F  
MOV I  
E
C L  
I
P
S ET  
(
page 6)  
DEL ET E A L L  
F OR MAT  
E X E CU T E  
CAN CE L  
OF F  
6.  
7.  
When deletion is completed, to the MOVIE CLIP SET menu screen returns.  
e When completed with settings, press the STATUS button to return to the normal  
PL AY MODE  
PAGE BACK  
DELETE ALL setting will return to CANCEL.  
screen.  
6.  
7.  
Press the PLAY button of GY-DV5000 to start DV cassette tape playback.  
\ To return to the NETWORK CONFIG menu screen, select PAGE BACK and  
press the SHUTTER dial.  
Press the VTR trigger button at the scene to start recording on the CF memory  
C F  
: Red display during  
recording  
\ To return to the normal screen, press the STATUS button.  
card.  
: Initializing  
During recording, the C F display appears in red.  
Memo  
Set to EXECUTE  
Protected clips are not deleted.  
8.  
9.  
To stop recording, press the VTR trigger button.  
To resume recording, press the VTR trigger button once more.  
To end recording, press the VTR trigger button.  
Deleting  
MOV I  
E
CL  
I
P
S ET  
10  
.
DELETE..  
C F  
* Before turning off the power, check to make sure the  
screen is white.  
indicator on the LCD  
C F  
Turning the power off when the  
file.  
indicator is red will damage the recorded clip  
NETWORK PACK CONFIG  
menu screen  
Memo  
N ETWORK P A CK C ONF I G  
Every time recording is performed, the recorded event is stored in the clip list of  
the CF memory card.  
MOVIE CLIP SET  
menu screen  
NET WORK S E T  
.
.
.
.
ENCODE SE T  
MPEG R EC  
TR  
I
G
MOV  
I
E
CL  
I
P
SET .  
.
Stored contents of clip list: Clip number and date/time when recording was started.  
MENU R ES E T  
PAGE BACK  
MOV I  
E
CL  
I
P
S ET  
All events can be played back on the MOVIE CLIP screen. ( page 22)  
DEL ET E A L L  
F OR MAT  
CAN CE L  
CAN CE L  
OF F  
PL AY MODE  
PAGE BACK  
The CF memory card remaining time is displayed on the LCD screen/viewfinder  
screen.  
Set to  
TRIG or SPLIT  
ENCODE SET  
menu screen  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie clip  
Playing back video/audio recorded on a CF memory card  
Movie clip  
Playing back video/audio recorded on a CF memory card  
Every time recording is performed, the recorded event is stored in the clip list of the CF memory card. The clip list is stored with the  
recorded event number (clip number) and the date/time when the recording was started. All events (clip numbers) can be played back  
on the MOVIE CLIP screen.  
CLIP FUNCTION screen  
STATUS  
SHUTTER  
SHUTTER  
dial  
MOV I  
MC 0 0 0  
E
C L I  
P
MENU  
8
.
a
s
f
R
/ W  
BLANK SEARCH REW  
STOP  
FF  
PLAY  
STILL  
STATUS  
BLANK SEARCH REW  
STOP  
FF  
PLAY  
STILL  
OPEN  
SHUTTER  
MENU  
EDITSEARCH  
REV I E W  
DE LE T E  
P ROT E CT  
MONITOR  
FILTER  
3200K  
1
2
5600K  
1
/
8
ND  
64 ND  
STATUS  
.3 5600K  
.4 5600K  
1
/
POWER  
SUPPL  
Y
SHUTTER  
PLAY button  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MENU  
PAGE BACK  
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
A
U
T
O
I
R
I
S
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
OPEN  
MODE  
AUDIO INPUT  
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
VTR  
CH-1  
CH-2  
EDITSEARCH  
L
AUTO  
FF button  
REW button  
CAM  
MANUAL  
MONITOR  
NETWORK  
PACK  
KA-DV5000  
FILTER  
3200K  
1
2
STATUS  
button  
SHUTTER  
dial  
5
6
0
0
K
1
/
8
N
D
REW button  
POWER SUPPLY  
switch  
.3 5600K  
.4 5600K 1/64 ND  
POWER  
SUPPL  
Y
STATUS  
REVIEW  
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
POWER  
VTR  
AUDIO  
LEVEL  
PULL  
ON  
OFF  
OPEN  
FRONT  
REAR  
PAGE BACK  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
FF button  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
MOV I  
MC 0 0 0  
E
.
C L I P  
8
a
s
f
R
/ W  
POWER  
VTR  
ON  
OFF  
MODE  
VTR  
7.  
Play back the clip.  
CAM  
MODE switch  
POWER switch  
Turn the SHUTTER dial, move the cursor to REVIEW and press the SHUTTERdial.  
The movie clip is played back after the still image is displayed for about 1 sec-  
ond. The value of the recorded pixel size (320 × 240 or 160 × 120) appears  
during displaying the still image.The value of the recorded max. bit rate appears  
during playback.  
P L AY  
PAGE BACK  
1.  
2.  
Insert an already recorded CF memory card.  
Turn on the GY-DV5000 and KA-DV5000 power.  
MOVIE CLIP will not appear during card  
initialization (flashing display).  
Memo  
C F  
Check to see that the  
(When the power is turned on,  
display appears on the LCD screen/viewfinder screen.  
display will flash during initialization.)  
8.  
9.  
To pause playback, press the PLAY button.  
The video encoded by the KA-DV5000  
is so designed that it is displayed in a  
correct aspect ratio by personal  
TOP MENU screen  
To resume playback, press the PLAY button once more.  
3.  
4.  
5.  
Set the MODE switch to VTR. (Light the VTR indicator.)  
MENU  
D EO .  
10.The following operations are performed when the playback of the selected clip  
ends. (When PLAY MODE in the MOVIE CLIP SET screen is set to OFF)  
When there are no following clips, the unit pauses at the beginning of the current  
clip.  
computer monitor. When the CF  
AUD I O  
LCD V F  
TC UB  
OT HERS  
L E M AN AGE  
/
V
I
.
/
.
.
Make sure GY-DV5000 is not in operation.  
played-back video is viewed by video-  
out connector output of the GY-DV5000  
or observed on a liquid crystal monitor  
screen, the aspect ratio may look  
different. This is because a simple  
output is made on the video for a  
personal computer and is therefore  
normal and not a malfunction.  
/
/
C L OCK  
.
.
.
.
.
F
I
.
Display the MOVIE CLIP screen.  
MENU A L L RE S E T  
CAN C E L  
When there are following clips, the unit displays the still image of the next clip for  
about 1 second, then starts playback.  
When all remaining clips are played back, the unit pauses at the beginning of the  
played back clip.  
NE TWOR K PACK C ONF I G  
.
.
q Press the STATUS button for about 1 seconds to display the TOP MENU screen.  
w Turn the SHUTTER dial, move the cursor (t) to MOVIE CLIP and press the  
SHUTTER dial.  
The movie clip list of the latest clip page recorded on the CF memory card  
and the still image (starting point) of the latest clip number appear by overlap-  
MOV  
EX  
I
E
CL  
I
P
.
.
I
T
\ Selecting PAGE BACK during playback or pausing and press the SHUTTER dial  
will return to the MOVIE CLIP screen.  
ping.  
MOVIE CLIP screen  
When PLAY MODE in the MOVIE CLIP  
SET screen is set to REPEAT, repeat  
playback is performed. ( page 7)  
The clip page in the  
MOV I  
E
C L I  
P
Memo  
MOVIE CLIP screen dis-  
plays 4 lists per page.  
.
MC 0 0 0 5  
02 03  
MC 0 0 0 6  
02 03  
MC 0 0 0 7  
02 03  
MC 0 0 0 8  
02 03  
a
s f  
02  
s f  
02  
s f  
02  
s f  
02  
R / W  
Clip number  
Date/time  
09  
09  
10  
11  
:
0
0
:
:
:
:
00  
25  
55  
00  
/
/
When a MOVIE CLIP menu item is se-  
lected and the SHUTTER dial is pressed  
with no clips recorded on the CF memory  
card, NO CLIP!will flash for about 3  
seconds.  
.
a
/
R / W  
:
3
0
/
.
a
R / W  
:
1
0
/
/
To move to another clip during playback  
.
a
/
R / W  
Cursor  
Latest clip  
:
0
0
/
PAGE BACK  
Playback will remain on the current clip  
even when the FF button is pressed if the  
latest clip is being played back.  
\ To move to the next clip during middle of playback or pausing, press the FF  
button of GY-DV5000.  
The playback of the current clip stops and the unit pauses at the starting point of the  
If there is no CF memory card inserted,  
NO CF CARD!will flash for about 3  
seconds.  
next clip.  
6.  
Select the clip to play back.  
Pressing the FF button again pauses at the starting point of the following the next  
clip.  
q Turn the SHUTTER dial and move the cursor (t) to the clip to play back.  
Turning the SHUTTER dial up scrolls to the page with smaller (older) clip  
numbers.  
Turning the SHUTTER dial down scrolls to the page with larger (newer) clip  
numbers.  
Press the [FF] button to scroll to the next page. Press the [REW] button to  
scroll to the previous page.  
Press and hold the [FF] button for about 2 seconds to scroll to the page with  
the newest clip.  
Pressing the REW button during play back  
of the oldest clip will start playback at the  
starting point of the that clip.  
\ To move to the previous clip during middle of playback or pausing, press the  
REW button of GY-DV5000.  
The playback of the current clip stops and the unit pauses at the starting point of  
the previous clip.  
CLIP FUNCTION screen  
MOV I  
E
.
CL I  
s f  
P
Pressing the REW button again pauses at the starting point of the clip before the  
previous clip.  
MC 0 0 0 8  
a
R / W  
\ To move to the latest clip during middle of playback or pausing, press the FF  
button of GY-DV5000 for more than 2 seconds.  
The unit pauses at the starting point of the latest clip.  
To start playback, press the PLAY button.  
Press and hold the [REW] button for about 2 seconds to scroll to the page  
with the oldest clip.  
w Press the SHUTTER dial.  
CLIP FUNCTION screen of the selected clip appears.  
Still image (starting point) of the selected clip appears.  
Note  
REV I E W  
DE LE T E  
P ROT E CT  
PAGE BACK  
\ To move to the oldest clip during middle of playback or pausing, press the REW  
button of GY-DV5000 for more than 2 seconds.  
The unit pauses at the starting point of the oldest clip.  
To start playback, press the PLAY button.  
ASF files recorded using another device may not play back properly on this unit.  
Selected clip number Still image (starting point)  
of the selected clip  
OVER  
22  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie clip  
Protecting a clip file on a CF memory card  
Movie clip  
Deleting a clip file on a CF memory card  
Clips recorded on a CF memory card can be protected using the MOVIE CLIP screen.  
Clips recorded on a CF memory card can be deleted using the MOVIE CLIP screen.  
STATUS  
SHUTTER  
STATUS  
SHUTTER  
MENU  
MENU  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
STATUS  
button  
1
2
3200K  
5600K  
SHUTTER  
dial  
1
1
/
8
ND  
64 ND  
STATUS  
.3 5600K  
.4 5600K  
/
OPEN  
POWER  
SUPPL  
Y
EDITSEARCH  
MONITOR  
SHUTTER  
MENU  
FILTER  
L
C
D
B
R
I
G
H
T
DISPLAY  
STATUS  
button  
SHUTTER  
dial  
1
2
3200K  
5600K  
.3 5600K  
.4 5600K  
O
N
O
F
F
POWER SUPPLY  
switch  
1
1
/
8
ND  
64 ND  
STATUS  
AUDIO  
LEVEL  
PULL  
/
OPEN  
POWER  
SUPPL  
FRONT  
REAR  
Y
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
SHUTTER  
MENU  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
L
C
D
B
R
I
G
H
T
DISPLAY  
NORMAL  
SPOT  
CH-1  
O
N
O
F
F
POWER SUPPLY  
switch  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
AUDIO INPUT  
CH-2  
MODE  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
POWER  
VTR  
ON  
OFF  
POWER  
VTR  
MODE  
ON  
OFF  
VTR  
MODE  
VTR  
CAM  
POWER switch  
MODE switch  
CAM  
MODE switch  
POWER switch  
TOP MENU screen  
When executing FORMAT in the MOVIE  
CLIP SET menu screen, protected clips  
will also be deleted.  
1.  
2.  
Insert an already recorded CF memory card.  
Turn on the GY-DV5000 and KA-DV5000 power.  
1.  
2.  
Insert an already recorded CF memory card.  
Turn on the GY-DV5000 and KA-DV5000 power.  
MENU  
AUD I O  
LCD V F  
TC UB  
OT HERS  
L E M AN AGE  
/
V
I
D EO .  
.
/
.
.
Check to see that the C F display appears on the LCD screen/viewfinder screen.  
(When the power is turned on, display will flash during initialization.)  
Check to see that the C F display appears on the LCD screen/viewfinder screen.  
(When the power is turned on, display will flash during initialization.)  
/
/
C L OCK  
.
.
.
Protected clips will not be deleted even  
when executing DELETE ALL in the  
MOVIE CLIP SET menu screen.  
.
.
F
I
.
MENU A L L RE S E T  
CAN C E L  
NE TWOR K PACK C ONF I G  
.
.
MOV  
EX  
I
E
CL  
I
P
.
.
3.  
4.  
5.  
Set the MODE switch to VTR. (Light the VTR indicator.)  
3.  
4.  
5.  
Set the MODE switch to VTR. (Light the VTR indicator.)  
I
T
Make sure GY-DV5000 is not in operation.  
Make sure GY-DV5000 is not in operation.  
TOP MENU screen  
Display the MOVIE CLIP screen.  
Display the MOVIE CLIP screen.  
MOVIE CLIP screen  
MENU  
q Press the STATUS button for about 1 seconds to display the TOP MENU screen.  
w Turn the SHUTTER dial, move the cursor (t) to MOVIE CLIP and press  
the SHUTTER dial.  
q Press the STATUS button for about 1 seconds to display the TOP MENU screen.  
w Turn the SHUTTER dial, move the cursor (t) to MOVIE CLIP and press the  
SHUTTER dial.  
The latest page of the MOVIE CLIP screen appears.  
R/W display appears on the right of the clip number.  
AUD I O  
LCD V F  
TC UB  
OT HERS  
L E M AN AGE  
/
V
I
D EO .  
.
/
.
.
MOV I  
E
C L I  
P
/
/
C L OCK  
.
.
.
.
.
.
MC 0 0 0 5  
02 03  
MC 0 0 0 6  
02 03  
MC 0 0 0 7  
02 03  
MC 0 0 0 8  
02 03  
a
s f  
02  
s f  
02  
s f  
02  
s f  
02  
R / W  
F
I
.
09  
09  
10  
11  
:
0
0
:
:
:
:
00  
25  
55  
00  
/
/
The latest page of the MOVIE CLIP screen appears.  
MENU A L L RE S E T  
CAN C E L  
.
a
/
R / W  
NE TWOR K PACK C ONF I G  
.
.
:
3
0
/
MOV  
EX  
I
E
CL  
I
P
.
.
.
a
R / W  
6.  
Select the clip to delete.  
I
T
:
1
0
/
/
6.  
7.  
Select the clip to protect.  
.
a
/
R / W  
Turn the SHUTTER dial, move the cursor (t) to the clip to delete and press the  
:
0
0
/
Turn the SHUTTER dial, move the cursor (t) to the clip to protect and press the  
PAGE BACK  
SHUTTER dial.  
The CLIP FUNCTION screen of the selected clip appears.  
SHUTTER dial.  
The CLIP FUNCTION screen of the selected clip appears.  
7.  
8.  
Turn the SHUTTER dial, move the cursor to DELETE in the CLIP FUNCTION  
screen and press the SHUTTER dial.  
MOVIE CLIP screen  
Turn the SHUTTER dial, move the cursor to PROTECT in the CLIP FUNCTION  
screen and press the SHUTTER dial.  
CLIP FUNCTION screen  
A DELETE OK?confirmation message appears. (Confirmation screen)  
MOV I  
E
CL I  
P
.
MOV I  
MC 0 0 0 8  
E
.
CL I  
s f  
P
MC 0 0 0 5  
02 03  
MC 0 0 0 6  
02 03  
MC 0 0 0 7  
02 03  
MC 0 0 0 8  
02 03  
a
s f  
02  
s f  
02  
s f  
02  
s f  
02  
R / W  
09  
09  
10  
11  
:
0
0
:
:
:
:
00  
25  
55  
00  
/
/
a
R / W  
To delete, select YES using the SHUTTER dial and press the SHUTTER dial.  
DELETE . .flashes on the screen for about 5 seconds and then the MOVIE  
CLIP screen returns. The clip is deleted from the MOVIE CLIP screen.  
\ To cancel the deletion, select PAGE BACK and press the SHUTTER dial.  
.
a
/
R / W  
CLIP FUNCTION screen  
:
3
0
/
The selected clip is protected.  
.
a
R / W  
MOV I  
MC 0 0 0 5  
E
.
C L I  
s f  
P
:
1
0
/
/
The R/W display on the right of the clip  
number will change to an R display.  
.
a
/
R / W  
a
R
:
0
0
/
PAGE BACK  
REV I E W  
DE LE T E  
P ROT E CT  
Memo  
PAGE BACK  
Protected  
Clip number  
Protected clips cannot be deleted even when selecting DELETE.  
In this case, PROTECT!will flash for about 2 seconds and then CLIP FUNC-  
TION screen returns.  
REV I E W  
DE LE T E  
P ROT E CT  
Confirmation screen  
PAGE BACK  
MOV I  
MC 0 0 0 8  
E
.
CL I  
s f  
P
After deleting a clip and there are no remaining clips left on the CF memory card,  
NO CLIP!flashes on the screen for about 3 seconds and then the TOP MENU  
screen returns.  
a
R / W  
CLIP FUNCTION screen  
8.  
To return to the MOVIE CLIP screen after completing setting, select PAGE BACK  
and press the SHUTTER dial.  
MOV I  
MC 0 0 0 5  
E
.
C L I  
s f  
P
a
R / W  
To delete all clips, use the MOVIE CLIP SET in the NETWORK PACK CONFIG  
menu screen. (page 21)  
\ To cancel the protection, select PROTECT in the CLIP FUNCTION screen and  
DE LE T E OK?  
Y ES  
PAGE BACK  
DE LE T E  
press the SHUTTER dial.  
The R display will change to an R/W display and the protection on the clip will be  
.
.
REV I E W  
DE LE T E  
P ROT E CT  
canceled.  
PAGE BACK  
Deleting Flashing display  
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Movie clip  
Playing back CF memory card clips on your PC  
LAN card Sending video using LAN card while recording on a DV cassette tape  
STATUS  
SHUTTER  
MENU  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
1
1
/
8
ND  
64 ND  
STATUS  
STATUS button  
.3 5600K  
.4 5600K  
/
POWER  
SUPPL  
Y
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
POWER SUPPLY  
switch  
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
OFF ZEBRA  
OPEN  
EDITSEARCH  
SKIN  
AREA  
AUTO  
WHITE  
MONITOR  
ON  
FILTER  
1
2
3200K  
5600K  
ACCU  
POWER  
VTR  
1
1
/
8
ND  
64 ND  
STATUS  
FOCUS  
.3 5600K  
.4 5600K  
ON  
OFF  
/
POWER  
SUPPL  
VTR  
Y
AUDIO  
SHUTTER  
MENU  
LEVELE CH-1  
5
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
MODE  
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
A
U
T
O
I
R
I
S
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
AUDIO SELECT  
CF memory  
card  
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
COMPRESS  
VTR  
VTR  
CH-1  
CH-2  
L
AUTO  
CAM  
MANUAL  
CF Card reader  
NETWORK  
PACK  
KA-DV5000  
CAM  
VTR trigger button  
MODE switch  
VTR trigger button  
POWER switch  
POWER  
VTR  
ON  
OFF  
LCD screen  
1.  
2.  
Insert a LAN card into the Network Pack.  
*
If the PC is equipped with PCMCIA  
slot(s), CF card reader is not required.  
Clips recorded on a CF memory card can be played back on your PC.  
Turn on the GY-DV5000 and KA-DV5000 power.  
e
Check to see that the LAN card display is showing on the LCD screen/viewfinder  
screen.  
Caution  
Clips recorded on CF memory cards are stored in ASF file format.  
To play back a clip on your PC, Windows Media Player 7.01 is required.  
3.  
4.  
Set the MODE switch to CAM. (Light the CAM indicator.)  
Insert a recordable DV cassette tape.  
GY-DV5000 will be in the standby mode.  
* Windows Media Player is compatible with Windows XP or Windows 2000/98(SE)/Me operating system.  
* Media Player can be downloaded from the Microsoft Website.  
During this time, download the following codec software as well.  
The codec software is automatically downloaded when opening the clip file and running Windows Media Player.  
Video codec (decorder) ISO MPEG4  
LAN card display  
5.  
Set the NETWORK PACK CONFIG menu screen.  
No LAN card is inserted when the  
display  
appears. Turn off the power and insert a LAN  
card. Then, turn the power back on.  
q Set MPEG REC to TRIG.  
w Set the video/audio compress in the ENCODE SET menu screen. ( page 6)  
e When completed, press the STATUS button to return to the normal screen.  
Audio codec (decorder) G.726  
6.  
When pressing the VTR trigger button of GY-DV5000 while Streamproducer is in  
operation*, transmission of video/audio streaming data from the LAN card is started  
NETWORK PACK CONFIG  
menu screen  
simultaneously with recording to DV cassette tape.  
The LAN card display on the LCD screen/viewfinder screen will be as follows:  
Operation  
N ETWORK P A CK C ONF I G  
NET WORK S E T  
.
.
.
.
ENCODE SE T  
MPEG R EC  
: Red display during data transmission.  
e
1. Load data already recorded on a CF memory card to your PC using a CF card reader, etc.  
TR  
I
G
MOV  
I
E
CL  
I
P
SET .  
.
*
Perform setting described in 5-2 Operating video from DV camcorder Trigger  
MENU R ES E T  
PAGE BACK  
2. Launch Explorer, etc., and open the recorded clip file in ASF format.  
Windows Media Player launches and the clip is played back.  
mode functionof network distribution software StreamproducerUsers Guide.  
7.  
To stop transmission or recording, press the VTR trigger button.  
GY-DV5000 will be in the standby mode.  
Memo  
Video and audio files (clip files) in CF memory cards can be appended to email as attachment files.  
8.  
9.  
To resume transmission or recording, press the VTR trigger button once more.  
Set to TRIG  
ENCODE SET menu screen  
To end, press the VTR trigger button to stop transmission and recording and turn  
off the power.  
Lastly, remove the LAN card.  
Memo  
Streaming data will be sent from the LAN card even when a DV cassette tape is  
not inserted.  
When the DV cassette tape reaches the end during recording, the transmission  
of streaming data from the LAN card is also stopped.  
26  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LAN card  
Sending video using a LAN card (no DV cassette tape recording)  
LAN card  
Sending playback signals of a DV cassette tape using a LAN card  
STATUS  
SHUTTER  
MENU  
STATUS  
BLANK SEARCH REW  
STOP  
FF  
PLAY  
STILL  
SHUTTER  
MENU  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
1
2
3200K  
5600K  
1
1
/
8
ND  
64 ND  
STATUS  
STATUS button  
.3 5600K  
.4 5600K  
/
POWER  
SUPPL  
Y
OPEN  
SHUTTER  
MENU  
EDITSEARCH  
MONITOR  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
FILTER  
POWER SUPPLY  
switch  
1
2
.3  
3200K  
SHUTTER STATUS  
dial button  
AUDIO  
LEVEL  
5600K  
5600K  
.4 5600K  
1
/
8
ND  
64 ND  
STATUS  
PULL  
OPEN  
FRONT  
REAR  
1
/
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
POWER  
SUPPL  
CH-1  
CH-2  
CH-1  
CH-2  
Y
MODE  
AUDIO INPUT  
SHUTTER  
MENU  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
PLAY button  
CAM  
L
C
D
B
R
I
G
H
T
DISPLAY  
NETWORK  
O
N
O
F
F
POWER SUPPLY  
switch  
PACK  
AUDIO  
LEVEL  
KA-DV5000  
PULL  
OPEN  
FRONT  
REAR  
A
U
T
O
I
R
I
S
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
BACK  
NORMAL  
SPOT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
VTR  
CH-1  
CH-2  
L
A
UTO  
CAM  
MANUAL  
NETWORK  
PACK  
KA-DV5000  
POWER  
VTR  
ON  
OFF  
MODE  
POWER  
VTR  
ON  
OFF  
VTR  
MODE  
CAM  
MODE switch  
VTR trigger button  
POWER switch  
VTR  
CAM  
MODE switch  
VTR trigger button  
POWER switch  
LCD screen  
LCD screen  
1.  
2.  
Insert a LAN card into the Network Pack.  
1.  
2.  
Insert a LAN card into the Network Pack.  
Turn on the GY-DV5000 and KA-DV5000 power.  
Turn on the GY-DV5000 and KA-DV5000 power.  
e
e
Check to see that the LAN card display is showing on the LCD screen/viewfinder  
screen.  
Check to see that the LAN card display is showing on the LCD screen/viewfinder  
screen.  
3.  
4.  
5.  
Set the MODE switch to VTR. (Light the VTR indicator.)  
3.  
4.  
Set the MODE switch to CAM. (Light the CAM indicator.)  
Insert the recorded DV cassette tape.  
Set the NETWORK PACK CONFIG menu screen.  
q Set MPEG REC to SPLIT.  
w Set the video/audio compress in the ENCODE SET menu screen. ( page 6)  
e When completed, press the STATUS button to return to the normal screen.  
LAN card display  
LAN card display  
No LAN card is inserted when the display  
Set the NETWORK PACK CONFIG menu screen.  
q Set MPEG REC to SPLIT.  
w Set the video/audio compression in the ENCODE SET menu screen.  
No LAN card is inserted when the  
display  
appears. Turn off the power and insert a LAN  
card. Then, turn the power back on.  
appears on. Turn off the power and insert a LAN  
card. Then, turn the power back on.  
(
page 6)  
5.  
When operating Streamproducer and making network connection with KA-DV5000,  
sending of streaming video/audio data will start from the LAN card.  
e When completed with settings, press the STATUS button to return to the normal  
screen.  
When pressing the VTR trigger button on the side of GY-DV5000, recording to the  
NETWORK PACK CONFIG  
menu screen  
NETWORK PACK CONFIG  
menu screen  
HDD will start.  
6.  
When operating Streamproducer and making network connection with KA-DV5000,  
sending of streaming video/audio data will start from the LAN card.  
The LAN card display on the LCD screen/viewfinder screen will be as follows:  
: Red display during data transmission.  
N ETWORK P A CK C ONF I G  
e
N ETWORK P A CK C ONF I G  
The LAN card display on the LCD screen/viewfinder screen will be as follows:  
NET WORK S E T  
.
.
.
NET WORK S E T  
.
.
.
: Red display during data transmission.  
.
e
ENCODE SE T  
*
Perform setting described in 5-2 Operating video from DV camcorder Trigger  
.
ENCODE SE T  
MPEG R EC  
MPEG R EC  
S PL I T  
TR  
I
G
MOV  
I
E
CL  
I
P
SET .  
.
MOV  
I
E
CL  
I
P
SET .  
.
mode functionof network distribution software StreamproducerUsers Guide.  
*
Perform setting described in 5-2 Operating video from DV camcorder Trigger  
MENU R ES E T  
PAGE BACK  
MENU R ES E T  
PAGE BACK  
mode functionof network distribution software StreamproducerUsers Guide.  
6.  
7.  
8.  
To stop recording to the HDD, press the VTR trigger button on the side.  
Press the VTR trigger button on the side to resume recording to the HDD.  
7.  
8.  
Press the PLAY button of GY-DV5000 to start DV cassette tape playback.  
Press the VTR trigger button on the side at the scene to start HDD recording with  
Streamproducer.  
To end operation, stop the transmission by disconnecting the network connection  
with KA-DV5000 using Streamproducer, then turn off the power.  
Lastly, remove the LAN card.  
ENCODE SET menu screen  
Set to SPLIT  
ENCODE SET menu screen  
Set to TRIG or  
SPLIT  
9.  
To stop recording to the HDD, press the VTR trigger button on the side.  
10.Press the VTR trigger button on the side to resume recording to the HDD.  
Memo  
11.To end operation, first disconnect the network connection and then turn off the  
When MPEG REC is set to SPLIT, sending is performed only when the VTR  
trigger button on the side is pressed.The VTR trigger buttons on the front and on  
the lens are disabled.  
power. Lastly, remove the LAN card.  
Recording will not be made on the DV cassette tape even if a tape is inserted.  
28  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network pack setup  
Controlling GY-DV5000/KA-DV5000 via LAN card  
Network pack setup  
CAM & VTR CONTROL screen  
With the Network Pack, GY-DV5000/KA-DV5000 can be controlled via LAN.  
When the correct user ID and password are accepted, the following Streamcorder screen appears.  
It is also possible to playback video and audio from KA-DV5000 on your PC in the STREAMCAPTURE screen in realtime (live display)  
as well as save data to files. However, note that video and audio from KA-DV5000 can be played back only on one PC at a time.  
In the CAM & VTR CONTROL screen, camera adjustments of GY-DV5000 and VTR controls can be made.  
Peer-to-peer connection that directly connects the unit with a PC is explained here.  
There are the 3 types of users for Web access:  
Users referred as jvc(can be changed) that can  
perform all operations, ENCODEusers that can  
Set the LAN card  
driver by following  
the instructions on  
view all data but only change the encoding  
settings, and BROWSEusers that can only view  
data.  
The default password for each user type is ka-  
dv5kfor jvcusers, first 4 characters of the  
password set for jvcusers for ENCODEusers  
(default is ka-d) and fixed password of ka-dv”  
for BROWSERusers.  
The following is an explanation when login is made  
a user permitted with all operations. In the case of  
other users, the OK button and Cancel button will  
be disabled even if operations on the screen are  
allowed.  
manual provided  
by the card  
manufacturer.  
10/100 BASE-T  
cross cable  
PC  
GY-DV5000  
Screen selection  
OPEN  
EDITSEARCH  
MONITOR  
FILTER  
3200K  
1
2
5600K  
1
/
8
ND  
Clicking will display the se-  
.3 5600K  
.4 5600K  
1
/
6
4
N
D
Setting  
POWER  
SUPPL  
Y
STATUS  
SHUTTER  
MENU  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
A
U
D
I
O
I
N
P
U
T
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
AUTO  
VTR  
NORMAL  
SPOT  
CH-1  
L
CAM  
MANUAL  
NETWORK  
PACK  
KA-DV5000  
lected screen.  
Select the setting from the  
pull-down menu.  
POWER  
VTR  
ON  
OFF  
KA-DV5000  
Socket Com: EA2900-117 (USA)  
EA2903-162 (Europe)  
EA2906-194 (Asia)  
Adjustment mode selection  
Check the desired adjust-  
ment mode.  
(CF memory card adapter (PCMCIA TYPE I/II  
specifications)(sold separately) is required for  
inserting this card.)  
1.  
2.  
3.  
4.  
5.  
6.  
Turn your PC and GY-DV5000 and KA-DV5000 power off.  
Insert the PCMCIA LAN card to specify into KA-DV5000.  
8.  
Input the user ID and password.  
q For the user ID, input jvc(factory setting).  
For the password, input ka-dv5k(factory setting) or the  
name set in the NETWORK SET [2/2] menu screen.  
Clicking the OK icon will  
confirm the inputted set-  
ting.  
Connect the unit and PC using a 10/100 BASE-T cross cable.  
Turn the PC and GY-DV5000 and KA-DV5000 power on.  
Insert a recordable DV cassette tape.  
(
page 10)  
w Check to make sure the inputted user ID and password  
are correct and click the OK icon.  
(Check Save passwordso that the password does not  
need to be inputted for future accesses.)  
\ Camera Control  
Setting range  
PC settings  
Set the LAN card driver according to the manual provided  
by the card manufacturer.  
When setting AUTO to ON, items other than LOLUX will not be available.  
When setting BARS to ON, items other than AUTO and LOLUX will not be available.  
When setting GAIN to ALC, IRIS and SHUTTER will not be available.  
9.  
If the user ID and password are correct, the NETWORK PACK  
SETUP screen appears on the PC monitor.  
GY-DV5000/KA-DV5000 settings and operations can be  
controlled using the NETWORK PACK SETUP. ( page  
31)  
Network settings ( page 13)  
q Set the following items in the TCP IP properties:  
* DHCP server is not used.  
IP address: 192.168.100.101  
Subnet mask: 255.255.255.000  
w Setting the proxy server.  
Set the proxy server using the LAN SETTINGSof  
Windows.  
When using peer-to-peer communication that directly  
connects the PC and KA-DV5000, deselect the Use a  
proxy servercheckbox.  
When the Use a proxy serversetting must be en-  
abled due to a LAN environment (in-company LAN,  
etc.), click Advanced...and input the IP address of  
GY-DV5000 in Exceptionsof the Use a proxy server”  
setting.  
Item  
AUTO  
Adjustment mode  
Setting/description  
Caution  
ON: Auto mode on. Items other than LOLUX cannot be set.  
OFF: Auto mode off  
When setting the NETWORK PACK SETUP screen (CAM &  
VTR CONTROL, NETWORK SETUP, PORT SETUP or EN-  
CODE PARAMETERS) and the same menu screen is dis-  
played on the LCD screen or viewfinder of GY-DV5000, val-  
ues set in the NETWORK PACK SETUP screen will not ap-  
pear on menu screen of the LCD screen or the viewfinder of  
GY-DV5000.  
BARS  
ON: Color bar signals are outputted. Items other than AUTO and LOLUX cannot be set.  
OFF: Color bar signals are not outputted.  
WHITE BAL  
FAW: Full white balance mode  
PRESET: White balance will be in the preset state. (3200K)  
MEMORY A, B: White balance setting stored in the GY-DV5000 memory will be used.  
The values set in the NETWORK PACK SETUP screen will  
appear after the menu screen of GY-DV5000 is closed once  
and reopened.  
IRIS  
AUTO  
Auto iris mode. Iris will be adjusted within the following range:  
[3, 2, 1, 0, +1, +2, +3]  
MANUAL  
Manual iris mode. Iris will be adjusted within the following range:  
[CLOSE, F16, F11, F8, F5.6, F4, F2.8, F2, OPEN]  
During camera/VTR control, noise may be heard from the  
speakers. However, this is not a malfunction. If the noise be-  
comes irritating, open the Sound & Multimediaproperty from  
the Windows Control Panel and set the sound of Windows  
Explorer Start Navigationof Sound Eventsto off.  
* For setting details, see WindowsHelp.  
(
About proxy servers,Page 45)  
7.  
Launch the browser on your PC and enter 192.168.100.101  
(default factory setting) in the address bar and press ENTER.  
A confirmation window for user ID and password appears.  
Lolux  
GAIN  
ON  
OFF  
Lolux mode  
ALC  
ALC (Auto Level Control) mode. IRIS and SHUTTER cannot be set  
Check to make sure that NET REMOTE in the OTHERS [1/2]  
menu screen of GY-DV5000 is set to ON. Camera control  
will not be available when NET REMOTE is set to OFF.  
Depending on the cache setting of your browser, the param-  
eters updated in the Camera menu may not be effective im-  
mediately.  
Enter Network Password  
?
X
STEP  
Gain can be set within the following range. 0dB is not available.  
[3dB ~ 18dB]  
Please enter tour authentication information.  
OK  
0dB  
0dB (Sensitivity is not increased)  
Cancel  
secured  
Resource  
SHUTTER  
STEP  
Shutter speed can be set within the following range:  
U model: [1/7.5, 1/15, 1/30, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000]  
E model: [1/6.25, 1/12.5, 1/25, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000/, 1/10000]  
User name:  
Password:  
OFF  
Shutter speed will be 1/60 (1/50).  
(
): for E model  
V-SCAN  
Although this setting can be canceled, future settings of this item will not be allowed.  
31  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network pack setup  
\ VTR Control  
CAM & VTR CONTROL screen  
Network pack setup  
NETWORK SETUP screen  
Clicking NETWORK SETUP on the left of the Streamcorder screen displays the NETWORK SETUP screen for performing network  
related settings.  
VTR control icons  
Click each button to perform  
operation.  
\ To control the VTR in the Streamcorder screen, the following menu items of GY-DV5000 must be set in advance.  
OTHERS [1/2] menu screen  
Set NET REMOTE in the OTHERS [1/2] menu screen to ON.  
When set to OFF, the VTR cannot be controlled from the  
O T HE RS  
L ONG PAU S E  
R EMOT E F F  
S T E P S L OW MODE  
[
1
/
2
]
T
I ME  
3
0M I  
N
Streamcorder screen.  
/
RW MODE S EARCH  
F
I
E L D  
D V RE C T R  
I
GGER  
ON  
ON  
N E T R EMO T E  
N E X T PAGE  
P AGE BACK  
Contact your network administrator for any unclear points concerning network settings.  
Item  
Host Name  
Domain Name  
IP Address  
Description  
The host name can be set. (Max: 63 alphanumerical characters)  
The domain name can be entered. (Max: 63 alphanumerical characters)  
The IP address can be set.  
Factory setting  
none  
none  
\ VTR control icon operations by MODE switch settings of GY-DV5000 are as follows:  
: Mode will not change  
192.168.100.101  
(
page 11)  
GY-DV5000 state  
Clicking VTR control icon  
Subnet Mask  
Default Gateway  
DNS server  
The subnet mask can be set. ( page 11)  
255.255.255.000  
192.168.100.254  
0.0.0.0  
MODE switch  
Previous mode  
STOP  
FF  
REC  
REC  
REW  
STOP  
FF  
PLAY  
PAUSE/STILL  
The gateway address can be set. ( page 11)  
VTR  
REW  
FF  
PLAY  
PLAY  
PLAY  
The address of the domain name system server can be set.  
REW  
STOP  
STOP  
STOP  
STOP  
Wireless LAN  
Settings concerning wireless LAN can be made ( page 11)  
REW  
FF  
AD-HOC MODE: Ad-hoc mode IBSS/AHDM/OFF  
OFF  
2 ch  
PLAY  
REV SEARCH  
FWD SEARCH  
STILL  
WLAN CH:  
ESS-ID:  
WEP:  
Wireless LAN channel  
Network identification name (Max: 32 alpha numerical characters)  
64bit, 128bit, OFF  
STILL  
STOP  
REC  
REW  
FF  
PLAY  
CAM  
REC  
WEP Key:  
Allowed characters: 10 characters consisting of 0 ~ 9, a ~ f, A ~ F  
STOP  
STOP  
STBY  
STBY  
REC  
Caution  
If the IP address is changed in the Streamcorder screen, the unit will automatically jump to  
the new IP address. However, the screen may not be displayed correctly depending on the  
environment. In this case, access by specifying the new IP address using a browser.  
(
operation 7. on pages 30)  
32  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network pack setup  
PORT SETUP screen  
Network pack setup  
ENCODE PARAMETERS screen  
Clicking PORT SETUP on the left of the Streamcorder screen displays the PORT SETUP screen for performing port settings.  
Clicking ENCODE PARAMETERS on the left of the Streamcorder screen displays the ENCODE PARAMETERS  
screen for performing video/audio compression settings.  
Setting  
Input  
Select the setting from the  
Screen selection  
pull-down menu.  
Screen selection  
Click the OK icon to  
confirm setting.  
Setting range  
indicates default factory setting.  
Clicking the OK icon will confirm  
the inputted setting.  
Item  
Setting  
Description  
Frame Size  
320 × 240  
160 × 120  
Sets the video compression size.  
320 × 240: Sets the image size to 320 × 240 pixels. (SIF)  
160 × 120: Sets the image size to 160 × 120 pixels. (QSIF)  
(1/4 image size of SIF.)  
Item  
Description  
The RTSP port can be set. (1 to 32767)  
Factory setting  
RTSP  
8554  
80  
Bit Rate  
56K (bps)  
128K (bps)  
256K (bps)  
384K (bps)  
512K (bps)  
Sets the video streaming speed.  
HTTP (for WEB Browser) The HTTP port for WEB browser can be set. (1 to 32767)  
HTTP (for Media Player) The HTTP port for Media player can be set. (1 to 32767)  
8000  
* Changing ports require special knowledge. Always consult the administrator of the connecting network when making changes.  
* Do not use the same port numbers for RTSP and HTTP.  
MAX FRAME  
RATE  
MAX  
MID  
MIN  
Sets the frame rate per second. Settings are as shown below.  
(
): for E model  
Caution  
PIX SIZE  
BIT RATE  
PIX SIZE  
BIT RATE  
(bps)  
If the port is changed in the Streamcorder screen, the unit will automatically jump to the new  
port. However, the screen may not be displayed correctly depending on the environment. In  
320 × 240  
160 × 120  
320 × 240  
160 × 120  
(bps)  
MAX MID MIN MAX MID MIN  
NTSC 15 10 7.5 30 15 10  
PAL 12.5 25 12.5 12.5  
NTSC 15 10 7.5 30 15 10  
MAX MID MIN MAX MID MIN  
this case, access by specifying the new port using a browser. ( operation 7. on pages 30)  
NTSC 7.5  
5
5
1
1
3
1
1
1
15 10 7.5  
512K  
384K  
256K  
128K  
56K  
5
5
PAL  
5
3
1
12.5 12.5  
10 7.5  
5
5
5
NTSC  
PAL  
PAL  
NTSC 15 7.5  
PAL 12.5  
12.5  
5
5
5
5
25 12.5 6.5  
30 15 7.5  
12.5  
5
5
25 12.5  
5
34  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network pack setup  
STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file)  
Network pack setup  
STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file)  
Clicking STREAMCAPTURE on the left of the Streamcorder screen displays the Streamcapture screen shown below.  
About the Trigger Mode function (TRIG)  
Video and audio sent from KA-DV5000 via LAN can be played back on your PC in the Streamcapture screen or data can be saved to files.  
The Trigger Mode function can be used to save and transmit video/audio from KA-DV5000 to your PC by synchronizing to the button  
operations of GY-DV5000.  
It can be used on a PC that has Streamproducer installed.  
* Since video on the STREAMCAPTURE screen is converted video data, images will take more time to appear than the actual video taken with GY-  
DV5000.  
NETWORK PACK CONFIG  
menu screen  
1.  
Set MPEG REC in the NETWORK PACK CONFIG menu to  
TRIGor SPLITusing steps 1 ~ 9 of page 8.  
TRIG: Records/transmits video/audio streaming data to  
your PC at the same time as the recording to the DV cas-  
sette tape set in GY-DV5000.  
N ETWORK P A CK C ONF I G  
NET WORK S E T  
.
.
.
Video display  
.
ENCODE SE T  
MPEG R EC  
TR  
I
G
The display size can be changed in the  
Property dialog box.  
(page 39)  
MOV  
I
E
CL  
I
P
SET .  
.
MENU R ES E T  
PAGE BACK  
C AN CE L  
SPLIT: Records/transmits video/audio streaming data to  
your PC regardless of whether the DV cassette is set.  
2.  
Click the CAPTURE-TRIG./CAST-TRIG. button in the  
Streamcapture screen.  
Button lights and the program enters the trigger standby  
mode.  
Status/Time elapsed display  
Setting  
NETWORK SET menu screen  
(page 10)  
The current status is displayed.  
Memo  
VIEWING: Video or audio from KA-DV5000 is being  
played back in realtime (live display).  
When the CAPTURE-TRIG. button is on:  
Saves the video/audio from KA-DV5000 to your PC by  
synchronizing to the button operations of GY-DV5000.  
When the CAST-TRIG. button is on:  
CAPTURING: Video or audio is being saved in your PC.  
STOP:  
Playback is stopped.  
Transmits video/audio from KA-DV5000 to another PC  
by synchronizing to the button operations of GY-DV5000.  
* When saving and transmitting video/audio at the same  
time, light both CAPTURE-TRIG. and CAST-TRIG. but-  
tons.  
WAITTING:TRIG recording standby.  
Operation buttons – – Clicking will start operation. When on, the  
button will light.  
3.  
4.  
Press the VTR trigger button of GY-DV5000.  
When the MPEG REC item is set to SPLIT, only the VTR  
trigger button on the side panel is effective.  
Clicking the button will display the Property  
dialog box.  
VIEW  
Click to play back or stop video/audio from KA-  
DV5000 on your PC. (ON when the Streamcapture  
screen is opened.)  
e
A red  
mark appears on the GY-DV5000 LCD screen  
and recording/sending to the PC starts.  
Video display size and the save destination  
folder can be changed. (page 39)  
e
Press the VTR triggerbutton of GY-DV5000 while the red  
mark is displayed.  
CAPTURE  
Click to save video or audio to a PC.  
Default destination  
e
The  
mark on the LCD screen of GY-DV5000 turns white  
My Document¥Streamcorder (¥IPAddress)  
Saved file name:  
and recording/sending to the PC stops.  
The file name based on the capture start time  
will be used.  
2 0 0 2 0 3 0 4 1 5 3 0 0 0 .asf  
CAPTURE-TRIG.  
button  
CAST-TRIG.  
button  
Year  
Month Day  
Hour Minute Second  
CAPTURE-TRIG. Click when saving the video/audio from  
KA-DV5000 to your PC when starting recording  
with GY-DV5000. (page 37)  
OPEN  
EDITSEARCH  
CAST-CAM Click when sending the video/audio from  
MONITOR  
FILTER  
3200K  
1
2
5
6
0
0
K
1
/
8
N
D
.3 5600K  
.4 5600K 1/64 ND  
POWER  
SUPPL  
Y
STATUS  
SHUTTER  
MENU  
KA-DV5000 to another PC. (page 37)  
L
C
D
B
R
I
G
H
T
DISPLAY  
O
N
O
F
F
AUDIO  
LEVEL  
PULL  
OPEN  
FRONT  
REAR  
AUTO IRIS  
BACK  
F
U
L
L
A
U
T
O
BLACK  
LOLUX  
CH-1  
CH-2  
CH-1  
CH-2  
MODE  
AUDIO INPUT  
L
STRETCH  
NORMAL  
COMPRESS  
AUDIO SELECT  
CH-2  
UTO  
MANUAL  
VTR  
NORMAL  
SPOT  
CH-1  
L
A
CAM  
NETWORK  
PACK  
KA-DV5000  
CAST-BARS Click when transmitting color bars rather than video  
from KA-DV5000. (Video from KA-DV5000 will be  
displayed in the video display of the Streamcapture  
screen. Color bars will not be displayed.)  
OFF ZEBRA  
SKIN  
AREA  
AUTO  
ON  
WHITE  
ACCU  
FOCUS  
POWER  
VTR  
ON  
OFF  
VTR  
AUDIO  
LEVELE CH-1  
5
VTR trigger button  
<GY-DV5000 rear>  
CAST-TRIG. Click when sending the video/audio from KA-  
DV5000 to another PC when starting recording  
with GY-DV5000. (page 37)  
VTR trigger switch  
MUTE  
Click to turn on/off the mute setting.  
When on, the playback sound will be muted.  
OVER  
36  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network pack setup  
STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file)  
Network pack setup  
STREAMCAPTURE screen (Playing back video/audio using a PC and saving to file)  
Property dialog box  
About the Cast function (CAST)  
The Cast function can be used to send video/audio from KA-DV5000 to another PC.  
<Sending method>  
<Receiving sent video>  
Select the video display size  
Select the display size from the pull-  
down menu.  
Display the video to send in the video display window of the  
Streamcapture screen and click the CAST-CAM button.  
Video sent using the Cast function can be received using Win-  
dows Media Player.  
Setting range:  
1.  
Launch Windows Media Player and select [Open URL] from  
the [File] menu.  
Real size  
Fit to window  
Click the OK button to  
confirm settings.  
Advanced settings dialog box  
Save destination folder  
The default save destination is as follows:  
Set this field when changing the save destina-  
tion folder.  
My Document¥Streamcorder (¥IPAddress)  
When changing the destination folder, press the  
Browse... button and select the desired folder.  
The changed destination folder will be the de-  
fault folder for future save operations.  
Cast dialog box  
2.  
Input the IP address and port number of the PC sending data  
using Streamcapture.  
Click the OK button to confirm  
settings.  
CAST-  
CAM  
CAST-  
TRIG.  
CAST-  
BARS  
* The settings can be checked in "Internet URL" of the Cast  
dialog box.  
button button button  
Internet connection  
<Color bar transmission>  
When clicking the BARS button, color bars are transmitted rather  
than the video from KA-DV5000.  
Port numbers of the network used on the PC side dur-  
ing communication with the network pack are set.  
RTSP port: used for handling commands. Use [TCP].  
RTP port: used for receiving video data. Use [UDP].  
Video of the receiving side will be displayed with color bars.  
(Video from KA-DV5000 will be displayed in the video display of  
the Streamcapture screen. Color bars will not be displayed.)  
Click the CAST button to switch back to the transmission of video  
from KA-DV5000.  
Normally, available ports are automatically searched  
and set.  
If there are restrictions to the port numbers due to the  
LAN environment settings of your PC, consult your  
network administrator.  
To stop the transmission of video from KA-DV5000 / color bars,  
turn off the CAST-CAM/CAST-BARS button.  
Click the OK button to confirm  
settings.  
LAN connection  
When specifying the port numbers for use, check each  
checkbox and input the number in the edit box on the  
right.  
In this case, the connection with the receiving side will be dis-  
connected.  
HTTP port  
<Trigger transmission>  
Port number of the network used when sending  
video/audio is set. Normally, no user setting is re-  
quired.  
When transmitting video/audio from KA-DV5000 to another PC by  
synchronizing to the button operations of GY-DV5000, click the  
CAST-TRIG. Button. (page 37)  
Max clients  
Sent video/audio can be received up to the number  
specified in this dialog box.  
3.  
Click OK to view the received video.  
Internet URL  
Caution  
When receiving video/audio, the URL displayed here  
in entered in Windows Media Player.  
When Windows Media Player is receiving a video being sent,  
sometimes the connection with a server can be cut off. In such  
a case, press the PLAY button of Windows Media Player again.  
38  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting  
Others  
Troubleshooting  
When there is a system error, network error, unit malfunction, etc., KA-DV5000 displays the error on the GY-DV5000 LCD screen or  
Reference  
page  
Screen display  
Cause  
Remedy  
viewfinder screen.  
<Operation related>  
NO CF CARD!  
There is no CF memory card inserted.  
Insert a CF memory card.  
3
(Flashing for 3 sec.)  
PROTECT!  
Deletion of a protected clip file was  
attempted.  
To delete the clip file, remove the  
protection.  
24  
––  
11  
(Flashing for 3 sec.)  
NO CLIP!  
There is no CF memory card inserted, of Check the CF memory card.  
there is no clip file available.  
Warning display  
(Flashing for 3 sec.)  
SET WLAN AD HOC MODE  
OFF!  
Use of DHCP server was attempted  
while in the AD HOC mode.  
Set DHCP in the NETWORK SET menu  
screen to OFF when using the AD HOC  
mode.  
(Flashing for 3 sec.)  
SET DHCP OFF!  
Selection of AD HOC mode was at-  
tempted while using DHCP server.  
Set WLAN AD MOC MODE in the  
NETWORK SET menu screen to OFF  
when using DHCP server.  
11  
(Flashing for 3 sec.)  
<LCD screen or viewfinder screen>  
Reference  
page  
Screen display  
Cause  
Remedy  
<File system related>  
CF REMAIN 60SEC!  
(Flashing for 3 sec.)  
Remaining time became less than 60  
Stop recording and replace with a new  
25  
seconds during recording to CF memory CF memory card, or delete files on the  
card.  
current CF memory card to secure  
recording space.  
CF REMAIN 30SEC!  
CF REMAIN 20SEC!  
CF REMAIN 10SEC!  
CF FULL!  
Remaining time became less than 30  
seconds during recording to CF memory  
card.  
Remaining time became less than 20  
seconds during recording to CF memory  
card.  
Remaining time became less than 10  
seconds during recording to CF memory  
card.  
Remaining time has run out during  
(Displayed until CF recording recording to CF memory card.  
stops)  
CF FULL!  
Recording is being attempted on CF  
memory card with remaining time of less  
than 10 seconds.  
(Flashing for 3 sec.)  
FORMAT ERROR!  
Failed to format CF memory card.  
Check the CF memory card and format  
again. If the card still cannot be format-  
ted, contact your nearest JVC-authorized  
service agent.  
17  
17  
NO CF FORMAT!  
(Flashing)  
CF memory card is unformatted, or an  
unknown format is being used.  
Check the CF memory card and format.  
OVER  
40  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Checking communication/connection  
Others  
IP address  
Terminology  
By using the PING command standard to Windows, it is possible to check whether the connection is correct and that communication  
can be made from the PC to KA-DV5000.  
Identification number assigned to each computer that is connected to a network. The address is used for communication between  
network devices.  
1.  
2.  
Launch the command prompt.  
LAN (Local Area Network)  
A network structured within a relatively small range such as in a single building or an office of a company.  
For Windows 2000  
From the Start button, select [Programs] [Accessories] [Command Prompt].  
DHCP (Dynamic Host Control Protocol)  
Method of automatically assigning IP address within a network. When a computer is connected to a network, the DHCP server  
automatically assigns the IP address.  
Input the following and press the Enter key.  
PING xxx.xxx.xxx.xxx  
(xxx.xxx.xxx.xxx is the IP address of the other party)  
Input example: When the IP address of the other party is "192.168.0.10"  
PING 192.168.0.010  
WAN (Wide Area Network)  
A network structured within a wide area such as between the main office of a company and its branch offices. Internet is also  
generally referred to as WAN.  
3.  
Check to see that the other party is successfully displayed.  
If connection is not successful, Request timed outor Destination host unreachablemessage will appear.  
Netmask  
An IP address has the following two roles: 1) address for identifying the network, and 2) address for identifying individual computers.  
Netmask is a 32-bit value that defines the number of bits of the IP address to use for identifying the network.  
Gateway  
Hardware and software that translates different types of protocols when a computer communicates with another computer outside the  
network. The gateway IP address is referred to as the gateway address.  
RTP (Realtime Transport Protocol)  
Protocol to transmit in realtime digitalized video/audio data via a network.  
RTSP (Real Time Streaming Protocol)  
Protocol to control realtime transmission of video/audio data via a network.  
HTTP (Hypertext Transport Protocol)  
Protocol used when transferring HTML (Hypertext Markup Language) files between WWW server and browser.  
Protocol  
A set rule for a computer or communication device to perform communication over a network, etc.  
IEEE802,11b  
International standard for wireless LAN with maximum communication speed of 11Mbps.  
Channel (wireless LAN)  
Frequency range used by wireless LAN. The same frequency must be set by two sides for proper communication.  
If there is an access point, adapter, etc., using the same band in the proximity, there may be a hindrance in the communication and  
may reduce throughput or the quality of communication. When setting, check the settings of surrounding access points, etc., to avoid  
doubling.  
ESS-ID (wireless LAN)  
Network identification name used by wireless LAN. The name is used to distinguish other wireless LAN devices.  
Ad hoc mode (wireless LAN)  
A mode for direct communication without passing through an access point.  
Infrastrucre (wireless LAN)  
Form of communication via an access point.  
OVER  
42  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Encryption mode  
Terminology  
Others  
\ About IP address  
Terminology  
Setting for encrypting the flow of data during wireless communication.  
Following settings are available:  
Global IP address and local IP address  
None (Open System): No encryption. Setting will be unavailable and throughput will be improved. However, there is the risk of infor-  
mation leakage.  
There are 2 types of IP addresses: global IP addressand local IP address.  
40blt WEP:  
128blt:  
Encryption is performed using 40-blt encryption key.  
Global IP address: Just as different IP addresses are needed on a network, all PCs using the Internet worldwide must use a unique  
IP address. This IP address is referred to as global IP address.  
Encryption is performed using 104-blt + 24-blt (1V) keys. Although throughput will decline compared to Open  
System, security of data will be improved.  
Normally, the global address is assigned by the IS provider.  
Local IP address: In an environment not connected to the Internet (within a household, within a company, etc.), separate IP  
addresses can be used freely within a network.  
Access point (wireless LAN)  
Relay point for infrastructure communication. It can also serve as the relay point for cable LAN or wireless LAN.  
This IP address is referred to as local IP address.  
ASF (Advanced Streaming Format)  
Data streaming format developed by Microsoft Corporation (U.S.) for transmission of video and audio.  
IP address classes  
IP addresses are categorized into 3 classes depending on the number of PCs structuring a network.  
Class A IP addressesare used for large-scale networks, Class B IP addressesare used for medium-scale networks and Class C  
IP addressesare used for small-scale networks.  
Host name  
Name of a device (not limited to a computer but all connection devices with an IP address) on a network.  
Within a network, all IP addresses must be of the same class. Each IP address is structured by a series of 4 digit numbers separated  
by a period. The first number of the IP address indicates the class.  
Port number  
Number used for detecting applications and service during TCP/IP communication.  
Class indicated here  
TCP/IP  
IP address  
xxx.xxx.xxx.xxx  
Abbreviation for Transmission Control Protocol/Internet Protocol and is one of the protocols used during network connection.  
UDP  
First number of the IP address  
Class  
Class A  
Class B  
Class C  
Application (number of PCs structuring the network)  
For large-scale networks (max. approx. 16 million units)  
For medium-scale networks (max. approx. 65,000 units)  
For small-scale networks (max. approx. 120 units)  
Different from TCP, UDP is a low-level protocol that does not perform receive checks. In some cases, missing and distorted images  
may occur due to packet loss.  
1~127  
128~191  
192~223  
* 224 ~ 255are normally not used for IP addresses.  
For example, a network structured by a few PCs to dozens of PCs would use Class C IP addresses.  
Normally, the following special IP addresses are used when structuring a network.  
Class  
Set IP address  
Class A  
Class B  
Class C  
10.0.0.0 ~ 10.255.255.255  
172.16.0.0 ~ 172.31.255.255  
192.168.0.0 ~ 192.168.255.255  
About proxy server  
A proxy is a relay pointfor accessing the Internet. When enabling Use a proxy server, the proxy server will make access to the  
Internet.  
Since various access information is cached at this time, downloading will be faster when reloading the same information from the  
Internet since the data is loaded from the proxy server.  
44  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infantino Baby Carrier TravelTrio Shopping Cart Cover User Manual
Insignia GPS Receiver NS NAV02R User Manual
Invacare Mobility Aid Arrow RWD User Manual
John Deere Welding System AC G6010H User Manual
JVC Flat Panel Television LT Z26SX4B User Manual
JVC VCR HR E539EE User Manual
Kenmore Gas Grill 14116223 User Manual
KitchenAid Double Oven KDRS505X User Manual
KitchenAid Microwave Oven KEBU107SSS User Manual
Konica Minolta Digital Camera 505si User Manual