JVC VCR HR E539EE User Manual

VIDEO CASSETTE RECORDER

VIDEO PŘEHRÁVAČ

MAGNETOWID KASET VIDEO

(Hi-Fi)

(Vysoká věrnost reprodukce - Hi-Fi)

(Hi-Fi)

HR-E639EE

HR-E539EE

(Monaural)

(Monofonní)

(Monofoniczny)

OPERATE

PROG.

CLOCK

START

STOP

DATE

DAILY (M-F)

WEEKLY

C.RESET

AUX

CANCEL

TIMER

VOL.

PROG.

TV/VIDEO

VCR

PLAY

STOP

REW

SCENE FINDER

WIDE AUTO SP/LP

QUALITY TIMER

OPERATE

TIMER

TV PROG./

JOG

SHUTTLE

PUSH JOG

RENTAL

RETURN

SP LP

–20dB

NORM

^PLAYNTSC

TIMER

CH SET

STORE

MULTI BRAND

REMOTE CONTROL UNIT

PAL NTSC

The recorder illustrations appearing in this instruction manual are of the

HR-E639EE.

Na ilustracích v tomto návodu je zobrazen videorekordér HR-E639EE.

Ilustracje odtwarzacza przedstawione w niniejszej instrukcji dotyczą

HR-E639EE.

INSTRUCTIONS

POKYNY

INSTRUKCJA

PU30425-1824

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

CAUTION

POWER SYSTEM

Ⅲ When you are not using the recorder for a long period of

time, it is recommended that you disconnect the power

cord from the mains outlet.

This set operates on voltage of AC110 – 240 V` (Rating),

AC90 – 260 V` (Operating), 50/60 Hz with automatic

switching.

Ⅲ Dangerous voltage inside. Refer internal servicing to

qualified service personnel. To prevent electric shock or

fire hazard, remove the power cord from the mains

outlet prior to connecting or disconnecting any signal

lead or aerial.

IMPORTANT

Ⅲ Please read the various precautions on this page and

page 33 before installing or operating the recorder.

Ⅲ It should be noted that it may be unlawful to re-record

pre-recorded tapes, records, or discs without the consent

of the owner of copyright in the sound or video record-

ing, broadcast or cable programme and in any literary,

dramatic, musical, or artistic work embodied therein.

ATTENTION

1.This recorder can also receive SECAM colour television

signals for recording and playback.

2.Recordings made of SECAM television signals produce

monochrome pictures if played back on another video

recorder of SECAM standard, or do not produce normal

colour pictures if played back on another video recorder

of PAL standard.

The OPERATE button does not completely shut off mains

power from the unit, but switches operating current on and off.

3.SECAM prerecorded cassettes or recordings made with a

SECAM video recorder produce monochrome pictures

when played back with this recorder.

Video tapes recorded with this video recorder in the LP (Long

Play) or EP (Extended Play) mode cannot be played back on a

single-speed video recorder.

Ⅲ Only cassettes marked "VHS" can be used with this videorecorder.

Ⅲ HQ VHS is compatible with existing VHS equipment.

PAL NTSC

Contents

SAFETY FIRST

TIMER RECORDING

Safety Precautions.................................................................... 2

Timer Programming ............................................................... 20

Check And Cancel Programmes......................................... 21

Auto SP/LP Timer ............................................................... 21

INSTALLING YOUR NEW RECORDER

Basic Connections ................................................................... 3

Tune The TV To Your Video Recorder ...................................... 4

Select Television System .......................................................... 4

EDITING

Edit To Or From Another Video Recorder .............................. 22

Edit From A Camcorder ......................................................... 23

INITIAL SETTINGS

INFORMATION ON MULTI-SYSTEM COMPATIBILITY

REMOTE CONTROL

On-Screen Displays ................................................................. 5

Tuner Set .................................................................................. 6

Clock Set ................................................................................. 9

Multi-Brand Remote Control.................................................. 26

PLAYBACK

TROUBLESHOOTING

QUESTIONS AND ANSWERS

INDEX

Basic Playback....................................................................... 10

Playback Features .................................................................. 11

RECORDING

SPECIFICATIONS

Basic Recording ..................................................................... 16

Recording Features ................................................................ 17

B.E.S.T. Picture System........................................................... 18

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLING YOUR NEW RECORDER

It's essential that your video recorder be properly connected.

Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER-

FORMED.

Basic

CHECK CONTENTS

listed in “Specifications” (੬ pg. 33).

Connections

Make sure the package contains all of the accessories

Aerial terminal

RF Cable

SITUATE RECORDER

Place the recorder on a stable, horizontal surface.

(provided)

Back of TV

CONNECT RECORDER TO

The connection method you use depends on the type of

TV you have.

Aerial

Cable

RF CONNECTION

● To Connect To A TV With NO AV Input Terminals . . .

a– Disconnect the TV aerial cable from the TV.

b– Connect the TV aerial cable to the ANT. IN jack

on the rear panel of the recorder.

AV-IN terminals

AV Cable

(not provided)

c– Connect the provided RF cable between the RF

OUT jack on the rear panel of the recorder and the

TV’s aerial terminal.

AV CONNECTION

● To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional AV cable between the

AUDIO OUT and VIDEO OUT connectors on the

rear panel of the recorder and the TV’s AV-IN

terminals .

Mains Power Cord

CONNECT RECORDER TO

MAINS

Plug the end of the mains power cord into a mains

outlet.

Rear View

Mains outlet

AUDIO OUT/VIDEO OUT

For HR-E539EE Owners:

If your TV has AUDIO IN L and R connectors, connect the

recorder to the L connector.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLING YOUR NEW RECORDER (cont.)

SET SYSTEM SWITCH

system. (Refer to the chart on the left.)

Set to the appropriate position depending on your TV

Select Televi-

sion System

NOTES:

● If no colours appear on the screen when using a multi-system

television with its system select switch set to AUTO, change

the switch position to correspond to the recorder's RF system

select switch (G or K).

Major countries

Colour TV broadcast

system

Switch

position

China, Mongolia,

Rumania

PAL D/K

● For more information on multi-system compatibility. ੬ p.24

Bulgaria, Czech Rep.,

Slovakia, Hungary,

Poland, Russia

SECAM D/K

Back of recorder

SYSTEM

K – G

OFF – ON

Austria, Denmark,

Finland,Holland, Italy,

Norway, Spain,

Switzerland, Sweden,

Germany

PAL B/G

Egypt

SECAM B/G

The video recorder sends picture and sound signals via the RF

connecting cable to your TV on UHF channel 36.

Tune The TV

To Your Video

Recorder

TURN ON THE RECORDER

Press OPERATE.

SELECT OUTPUT MODE

Set the TEST switch on the back of the recorder to ON.

SET TV CHANNEL

Set your TV to the video channel (UHF channel 36).

Two white bars appear on screen vertically.

● Tune the TV until the bars are as clear as they can be.

● Your TV should be set to the channel designated for

use with a video recorder, or to a spare channel if

there is not a specified video channel on your TV.

RESET OUTPUT MODE

Return the TEST switch to OFF.

NOTES:

● If CH36 is occupied by a local station, adjust the RF output

channel adjustment screw to use another channel between

CH32 and CH40 instead.

● If some interference noise is continually seen on the screen,

consult your JVC dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIAL SETTINGS

You can choose whether or not to have various operational

indicators appear on screen, by setting this function ON or OFF.

Messages appear in the language you select.

Use the buttons on the remote control for this procedure.

On-Screen

Displays

TURN ON THE RECORDER

Press OPERATE.

Turn on the TV and select the VIDEO channel (or AV mode).

SELECT LANGUAGE

Press OSD( ). The

ENGLISH

Language screen appears.

Place the pointer next to

the language of your

choice by pressing TV

PROG.5/∞, then press OK

to enter your selection.

[TV PROG

] =

∞

[OSD] : EXIT

SELECT MODE

The pointer should already

be next to “O.S.D.”. If not,

press TV PROG.5/∞ to

place it there.

O.S.D.

: ON

B.E.S.T.

OPERATE

[TV PROG5 ] =

:ON/OFF

∞

[OSD] :EXIT

ENABLE/DISABLE

ON-SCREEN DISPLAY

The default setting is “ON”, so if you want on-screen

displays, leave the setting as is and go to step 5. If you

don’t want the displays to appear, press OK to set

“O.S.D.” to “OFF”.

TV PROG.5∞

CLOSE MODE SELECT

SCREEN

Press OSD ( ).

OSD (

)

The superimposed indication on the TV screen tells you what the recorder is doing.

1– Operation mode indicators

2– Channel position number/Aux. indicator (AUX)

3– Cassette loaded mark

4– Tape speed SP/LP/EP

5– Colour System indicator (੬ pg. 24)

6– Clock display

PR. 12

23 : 59

31. 12. 96

]

PAL

7– Current day/month/year

8– Tape direction

9– Tape position indicator (੬ pg. 14)

10– Counter display (including Counter Memory indicator)

11– Audio mode display [E639EE only]

12– B.E.S.T. Picture System indicator

B.E.S.T.

HI FI

M –9 : 59 : 59

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIAL SETTINGS (cont.)

Your recorder needs to memorise all necessary stations in

channel positions in order to record TV programmes. Once

stored, you can call them up with the TV PROG. buttons

without going through any vacant channels.

Tuner Set

TURN ON THE RECORDER

● Turn on the TV and select the VIDEO channel (or AV mode).

● Be sure to select the AUTO mode by pressing the

COLOUR SYSTEM button. (੬ pg. 24)

Press OPERATE.

ACCESS CHANNEL SET

MODE SELECT SCREEN

Press and hold CH SET for more than 2 seconds. The

Channel Set Mode Select screen appears.

SELECT MODE

Turn the TV PROG. dial to

place the pointer next to

"SEARCH/STORE", then

press OK. The Band Select

screen appears.

SEARCH/STORE

DELETE

FINE TUNING

[TV PROG

] =

∞

[CANCEL] :EXIT

OPERATE

SELECT BAND

Turn the TV PROG. dial to place the pointer next to the

band of your choice, then press OK to initiate Auto

Channel Search.

BAND SELECT

VHF L

VHF H

AUTO SEARCH PROCEEDING

PLEASE WAIT

UHF

VHF L 00

TV PROG.

[CH SET] :EXIT

[TV PROG5 ] =

∞

[CH SET] :EXIT

SET DESIRED CHANNEL

The following screen

appears when a station is

STORE

detected. To store the

detected station, place the

pointer next to "STORE" by

turning the TV PROG. dial,

then press OK.

If you don't want to store

the station, turn the TV

CONTINUE

[TV PROG5 ] =

∞

[CH SET] :EXIT

PROG. dial to place the pointer next to "CONTINUE",

then press OK. Auto Channel Search will start resume.

● The blueback screen and the TV picture currently

being broadcast appear alternately for 8 seconds

each.

NOTES:

● You can also use the TV PROG. 5/∞ button on the remote

control instead of the TV PROG. dial.

● You can also use the SHUTTLE ring on the recorder instead of

the OK button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Delete A Stored Channel

SELECT POSITION

Turn the TV PROG. dial

TURN ON THE RECORDER

until an open position in

SELECT NUMBER

TV PROG. 1

Press OPERATE.

which you want to store a

channel appears, then

press OK.

[TV PROG

[CH SET] :EXIT

] =

∞

ACCESS CHANNEL SET

MODE SELECT SCREEN

Press and hold CH SET for more than 2 seconds. The

STORE CHANNEL

Channel Set Mode Select screen appears.

If fine tuning is not

necessary, simply press

STORE. For fine tuning

TV PROG.

SELECT MODE

"DELETE", then press OK.

adjustment, turn the TV

PROG. dial until the

picture becomes clearer,

then press STORE.

Turn the TV PROG. dial to place the pointer next to

[STORE] :STORE

[TV PROG5] :FINE TUNING +

[TV PROG ] :FINE TUNING –

[CH SET] :EXIT

∞

SELECT CHANNEL

● To continue Auto Channel Search, turn the TV PROG.

dial to select "CON-

TINUE", then press OK.

Turn the TV PROG. dial

until the position number

of the channel you wish to

delete appears.

SELECT NUMBER

Repeat steps 5 – 7 as

necessary.

TV PROG.

CONTINUE

ADDED

● To set channels for other

bands, turn the TV

PROG. dial to select

"BAND SELECT", then

press OK to go back to

● If the on-screen display

is hard to read, refer to

the recorder's display

panel.

BAND SELECT

[TV PROG5 ] =

∞

[CH SET] :EXIT

[TV PROG5 ] =

∞

[CH SET] :EXIT

the Band Select screen. Repeat steps 4 – 7.

DELETE CHANNEL

Press OK twice.

RETURN TO NORMAL

The screen shows the

selected channel has been

deleted.

TV PROG. 1 DELETED

SCREEN

Press CH SET.

● To delete another

channel, press OK again,

then repeat steps 4 – 5.

:CONTINUE

[CH SET] :EXIT

RETURN TO NORMAL

SCREEN

Press CH SET.

NOTE:

If you skipped a channel by mistake, perform steps 1 – 8 on

pages 6 and 7 to re-store it.

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIAL SETTINGS (cont.)

Fine-Tuning Channels

Already Stored

TURN ON THE RECORDER

Press OPERATE.

ACCESS CHANNEL SET

MODE SELECT SCREEN

Press and hold CH SET for more than 2 seconds. The

Channel Set Mode Select screen appears.

SELECT MODE

OPERATE

Turn the TV PROG. dial to place the pointer next to

"FINE TUNING", then press OK.

SELECT CHANNEL

Turn the TV PROG. dial so

that the position number of

the channel you want to

fine-tune appears, then

press OK.

SELECT NUMBER

TV PROG.

[TV PROG5 ] =

∞

[CH SET] :EXIT

PERFORM TUNING

Turn the TV PROG. dial

until the picture becomes

TV PROG.

clearer, then press STORE.

● To fine-tune another

channel, press OK and

repeat steps 4 – 5.

[STORE] :STORE

[TV PROG5] :FINE TUNING +

[TV PROG ] :FINE TUNING –

∞

[CH SET] :EXIT

RETURN TO NORMAL

SCREEN

Press CH SET.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use the buttons on the remote control for this procedure.

TURN ON THE RECORDER

Clock Set

Press OPERATE.

Turn on the TV and select the VIDEO channel (or AV mode).

ACCESS MODE SELECT

SCREEN

Press CLOCK.

SELECT MODE

place the pointer next to

"CLOCK SET", then press

OK. The Clock Set screen

appears.

Press TV PROG.5/∞ to

TIMER PROGRAMMING

CLOCK SET

[TV PROG5 ] =

∞

[CANCEL] :EXIT

OPERATE

SET TIME

or "4(∞)" to set the time.

Use NUMBER key "1(5)"

CLOCK SET

DATE

TIME

0:00

YEAR

● Press and hold either

button to delay or

advance the time by 30

minutes.

01:01

NUMBER5∞

[1 – 6]

[PROG./CLOCK] :EXIT

TV PROG.

SET DATE

Use NUMBER key "2(5)" or "5(∞)" to set the date.

● Press and hold either button to change the date by 15

days.

SET YEAR

Use NUMBER key "3(5)" or "6(∞)" to set the year.

RETURN TO NORMAL

SCREEN

Press CLOCK.

To Make Corrections

Perform steps 1 – 3 to call up the Clock Set screen, use

NUMBER keys "1" – "6" to make the correction, then press

CLOCK.

NOTE:

If, in step 7, the year digits are automatically cleared, it is

possible that you have input 29th February for a non-leap year.

Input the correct data.

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYBACK

The easiest, most basic operation possible with your video

recorder is tape playback. Already-recorded signals on a video

tape are read by your video recorder and displayed on your TV

just like a TV programme.

Basic

LOAD A CASSETTE

Playback

Turn on the TV and select the VIDEO channel (or AV mode).

Make sure the window side is up, the rear label side is

facing you and the arrow on the front of the cassette is

point toward the recorder. Don’t apply too much

pressure when inserting.

● The recorder power comes on automatically and the

counter is reset to 0:00:00.

● Select the appropriate colour system by pressing the

COLOUR SYSTEM button. (੬ pg. 24)

● If the record safety tab has been removed, playback

begins automatically.

FIND PROGRAMME START

POINT

If the tape is advanced past the start point, press REW or

turn the SHUTTLE ring to the left and release it.

To go forward, press FF or turn the SHUTTLE ring to the

right and release it.

START PLAYBACK

Press PLAY. "B.E.S.T." appears on screen. (੬ pg. 18)

STOP PLAYBACK

Press STOP on the remote or STOP/EJECT on the

recorder’s front panel. Then press STOP/EJECT to

remove the cassette.

Usable cassettes

REW

● Compact VHS camcorder recordings can be played on

this video recorder. Simply place the recorded cassette

into a VHS Cassette Adapter and it can be used just like

any full-sized VHS cassette.

● This video recorder can record on regular VHS and

Super VHS cassettes. However, it will record and play

back regular VHS signals only. It is not possible to play

back a recorded Super VHS tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Slow Motion

ACTIVATE SLOW-MOTION

PLAYBACK

Playback

Features

During playback or still, turn the SHUTTLE ring to the

right for forward slow motion, or to the left for reverse

slow motion (refer to the illustration to the left).

Take advantage of special functions possible with the recorder’s

controls or the remote control.

During still picture, press and hold PAUSE for 2

seconds, then release. Press and release again to return

to still picture.

NOTE:

Refer to the SHUTTLE ring illustration below as you read the

following procedures.

During still picture, press and hold PUSH JOG or

Release to return to still picture.

Still

To resume normal playback, press PLAY.

Variable-Speed Search

ACTIVATE VARIABLE-SPEED

During playback or still, turn the SHUTTLE ring to the

right for forward variable-speed search, or to the left for

reverse variable-speed search (refer to the illustration to

the left).

Still Picture/Frame-By-Frame

Playback

During playback, press PUSH JOG or

● The more times you press, the faster the playback

picture moves.

● To decrease speed, press the button for the opposite

direction.

PAUSE DURING PLAYBACK

Press PAUSE. If there is vertical jitter, use the TV PROG.

buttons to correct the picture.

To resume normal playback, press PLAY.

ACTIVATE FRAME-BY-FRAME

PLAYBACK

High-Speed Search

Turn the JOG dial to the right for forward frame-by-

ACTIVATE HIGH-SPEED

frame playback, or to the left for reverse frame-by-frame

playback.

Press PAUSE.

During playback or still, turn the SHUTTLE ring all the

way to the right for forward high-speed search, or to

the left for reverse high-speed search.

● For forward search with a visible picture, turn the

SHUTTLE ring all the way to the right and release it

within 1 second.

● For reverse search with a visible picture, turn the

SHUTTLE ring all the way to the left and release it

within 1 second.

Press PUSH JOG or

To resume normal playback, press PLAY.

Press FF for forward high-speed search, or REW for

reverse high-speed search.

● For short searches, press and hold FF or REW for over

NOTE:

2 seconds. When released, normal playback resumes.

In the search, still or frame-by-frame playback mode, the

picture will be distorted, and there may be a loss of colour.

To resume normal playback, press PLAY.

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYBACK (cont.)

Manual Tracking

Your video recorder is equipped with automatic tracking

control. During playback, you can override this and adjust the

tracking manually by pressing the TV PROG. button.

OVERRIDE AUTOMATIC

TRACKING

Press SP/LP/EP (

tracking.

) on the remote to engage manual

ADJUST TRACKING

MANUALLY

Press TV PROG. 5 or ∞ to adjust tracking.

RETURN TO AUTOMATIC

TRACKING

Press SP/LP/EP (

automatic tracking.

) on the remote to re-engage

TV PROG.

SP/LP/EP

NOTE:

When a new tape is inserted, the recorder enters the automatic

tracking mode automatically.

Wide Quality [E639EE only]

Use this function to improve image contrast which tends to

degrade especially with wide-screen TVs.

ACTIVATE WIDE QUALITY

During playback, press WIDE QUALITY on the recorder.

● The button will light in green.

● Pressing the button again turns off the light.

● Turn on/off the light according to the type of playback

picture you want.

● The setting will remain effective even though you

turn on/off the recorder.

● This function is also effective with large-screen 4:3

aspect ratio TVs as well.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instant ReView

Index Search

Simply by pressing a single button, the recorder power comes

on, rewinds, and begins playback of the last timer-recorded

programme. If you have several programmes recorded, you can

easily access any of them.

Your recorder automatically marks

index codes at the beginning of

each recording. This function gives

you quick access to any one of 9

index codes in either direction.

£ 2

NOTES:

NOTE:

● Before starting, make sure that the recorder is off and that the

Timer mode is disengaged.

Before starting, make sure the

recorder is in the Stop mode.

● Turn on the TV and select the VIDEO channel (or AV mode).

ACTIVATE INSTANT

REVIEW

recorder searches for the index code indicating the start

of the last timer-recorded programme. Once it’s found,

playback begins automatically.

If you have, for example, 3 programmes and wish to

watch the first of the 3 programmes, press REVIEW

three times. The recorder searches and begins playback

automatically. You can access a programme as far as 9

index codes away from the current tape position.

ACTIVATE INDEX SEARCH

Press PUSH JOG or (™ or £). “™ 1” or

“£ 1” is displayed on screen and search begins in

the corresponding direction.

Press REVIEW. The recorder power comes on and the

● To access index codes 2 through 9, press PUSH JOG

or repeatedly until the correct index number is

displayed.

Ex.: To locate the beginning of B from the current

position, press PUSH JOG twice.

To locate the beginning of D from the current

position, press PUSH JOG once.

NOTE:

Current position

Instant ReView is not possible while the recorder is in the Timer

mode.

–2

–1

Repeat Playback

Index number

● When the specified index code is located, playback

Your video recorder can automatically play back the whole tape

20 times repeatedly.

begins automatically.

Counter Memory

Returns to the counter reading of “0:00:00” to conveniently find

a specific place on the tape automatically.

START PLAYBACK

Press PLAY.

SET COUNTER MEMORY

locate later. The counter reads “0:00:00”. Then press C.

MEMORY, and “M” appears on the front display panel.

Press C. RESET during playback at a point you wish to

ACTIVATE REPEAT

PLAYBACK

ACTIVATE COUNTER

MEMORY

Press PLAY and hold for over 5 seconds, then release.

● "PLAY" on the display panel blinks slowly.

● The tape plays 20 times automatically, and then

When you wish to return to the designated point, press

stops.

STOP and then REW or FF.

● The tape rewinds or fast-forwards and stops at about

0:00:00 automatically.

● To cancel Counter Memory, press C.MEMORY again.

STOP PLAYBACK

Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW , FF or PAUSE also stops Repeat Playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYBACK (cont.)

Scene Finder

This function helps you check contents of unlabeled recorded

tapes at the touch of a single button.

SCENE FINDER

REW FF

REW

5 seconds

10 minutes

on counter

5 seconds

10 minutes

on counter

5 seconds

NOTE:

Scene Finder cannot be used when the recorder is in the Record

mode.

ACTIVATE SCENE FINDER

Press SCENE FINDER. The recorder starts forward high-

speed search for 5 seconds and then fast-forwards 10

minutes on the counter. This cycle is repeated until the

end of the tape is reached.

OPERATE

● To start Scene Finder in the reverse direction, press

SCENE FINDER and then press the REW button

within 2 seconds. This cycle is repeated until the

beginning of the tape.

● During Scene Finder, "PLAY" appears blinking on the

display panel. During fast forward or rewind, "

or " " appears on screen.

STOP SCENE FINDER

Press STOP.

REW

STOP

NOTES:

● During Scene Finder high-speed search, you can also hear the

tape sound. During fast forward or rewind, you hear the

current TV sound instead.

SCENE FINDER

C. MEMORY

● Scene Finder does not function during Index Search.

Next Function Memory

You can set your recorder's power to go off automatically after

the tape is fully rewound. Before starting, make sure the

recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press OPERATE within 2 seconds.

NOTE:

If you want the power to be turned off automatically when the

counter reads “0:00:00” (instead of at the beginning of the

tape), press C.MEMORY so that the “M” mark appears before

pressing REW.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote A/B Code Switching Tape Position Indicator

The tape position indicator appears

on screen when, from the Stop

mode, you press FF, REW or

perform an Index Search. The

position of “5” in relation to “0”

(beginning) or “+” (end) shows you

where you are on the tape.

The remote control is capable of controlling two JVC video

recorders independently; one set to respond to the remote

control’s A code control signals and another set to respond to B

code control signals. The remote control is preset to send A

code signals because your video recorder is initially set to

respond to A code signals. You can easily modify your video

recorder to respond to B code signals.

1:23:45

”O.S.D.” (੬ pg. 5) must be set to

“ON”, or the indicator will not

appear.

REMOVE POWER SUPPLY

Unplug the mains power cord from the mains outlet.

NOTE:

Depending on the type of tape used, there may be times when

the indication is not correct.

SET A/B CODE SWITCH

Set to B.

Rental Return (E639EE only)

Simply by pressing one button, the recorder stops, rewinds, and

ejects the tape for you. A quick and easy way to rewind rental

video tapes before you return them to the shop.

RE-SUPPLY POWER

Plug the mains power cord back into the mains outlet.

ACTIVATE RENTAL RETURN

Anytime except during recording, press RENTAL

RETURN.

TURN THE RECORDER ON

● The recorder will rewind the tape to the beginning

and eject it.

● ] on the display panel will blink while in the

Rental Return mode.

● To cancel the Rental Return mode, press STOP.

Press OPERATE on the remote control. The recorder

will now only respond to B code signals.

NOTE:

Some TV sets may malfunction in response to the B mode. If

this happens, switch back to the A mode.

Soundtrack Selection [E639EE only]

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO MONITOR (or

on the remote control) changes the soundtrack being played back as follows:

TRACK

USE

Recorder's Front Panel On-Screen Display

L + R

HI FI

For Hi-Fi stereo tapes

For main audio of Bilingual tapes

For sub audio of Bilingual tapes

NORM

For audio-dubbed tapes

L + R + NORM

HI FI

NORM

NOTES:

● "L + R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back

automatically for tapes with only normal audio.

● "O.S.D." must be set to "ON" or the on-screen displays will not appear (੬ pg. 5).

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

TV signals being received by the recorder’s built-in tuner can be

recorded onto a video tape. You can “capture” a TV programme

using your video recorder.

Basic

LOAD A CASSETTE

Insert a cassette with the record safety tab intact.

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

● The counter is reset to 0:00:00 and the recorder

power comes on automatically.

● Select the appropriate colour system by pressing the

COLOUR SYSTEM button.(੬ pg. 24)

CHOOSE A PROGRAMME

Press TV PROG. 5/∞ or the NUMBER keys to select

the channel you wish to record.

● The TV PROG. dial can also be used to select a channel.

RECORD

SET TAPE SPEED

Press SP/LP/EP. Check the SP/LP* indicator on the

recorder display panel to confirm the selected tape

speed.

*EP is displayed on screen only.

START RECORDING

Press and hold RECORD and PLAY on the remote

control, or press RECORD on the recorder.

B.E.S.T. takes place at the beginning of each first

SP and first LP (or EP) recording after inserting the

cassette (੬ pg. 18).

PAUSE/RESUME

RECORDING

NUMBER

Press PAUSE. Press PLAY to resume recording.

TV PROG.

PLAY

STOP RECORDING

Press STOP on the remote control or STOP/EJECT on the

recorder. Then press STOP/EJECT to remove the cassette.

SP/LP/EP

PAUSE

NOTE (For HR-E639EE Owners):

RECORD

Hi-Fi audio recording in NTSC EP mode is not possible.

Accidental erasure prevention

● To prevent accidental recording on a recorded cassette,

remove its safety tab. To record on it later, cover the hole

with adhesive tape.

Record safety tab

Download from Www.Somanuals.com. All Manuals Search And Download.

Record One Programme

While Watching Another

Recording

Features

SELECT CHANNEL TO

WATCH

Once recording is in progress, all you need to do is to

set the channel controls on the TV for the station you

wish to view.

● The programme selected with the TV’s channel

controls appears on the TV screen while the one

selected with the TV PROG. button(s) is recorded on

the tape.

RECORD

Elapsed Recording Time

Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

Press DISPLAY until a counter reading appears on the

dispay panel.

● Pressing the button changes the type of display:

Channel, Clock or Counter.

RESET COUNTER

Press C. RESET before starting recording or playback.

● The counter is reset to “0:00:00” and shows the exact

elapsed time as the tape runs.

C.RESET

TV PROG.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours

(selectable in 30-min. increments), and shuts the recorder off

after recording is finished.

START RECORDING

DISPLAY

Press RECORD on the recorder.

ENGAGE ITR MODE

the front display panel.

Press RECORD again. "REC" blinks and 0:30 appears on

SET RECORDING DURATION

RECORD to extend the time. Each press extends

recording time by 30 minutes.

If you want to record for more than 30 minutes, press

NOTE:

You can only perform ITR using the RECORD button on the

recorder's front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING (cont.)

The B.E.S.T. (Biconditional Equalised Signal Tracking) system

checks the condition of the tape in use during recording and

playback, and compensates to provide the highest-possible

recording and playback pictures. The default setting is "ON".

B.E.S.T. Picture

System

Recording

LOAD A CASSETTE

Insert a cassette with the record safety tab intact.

Turn on the TV and select the VIDEO channel (or AV mode).

● The recorder power comes on automatically.

ACCESS MODE SELECT

SCREEN

Press OSD( ) and the Language screen appears. (To

change the language, ੬ pg. 5) Press OK on the remote

control.

CONFIRM B.E.S.T. STATUS

The default setting is

“ON”. If this is the case,

O.S.D.

: ON

go to step 4. If not, press

B.E.S.T.

TV PROG. to place the

∞

pointer next to “B.E.S.T.”,

then press OK to set to

“ON”.

[TV PROG5 ] =

:ON/OFF

∞

[OSD] :EXIT

CLOSE MODE SELECT

SCREEN

Press OSD ( ).

START RECORDING

TV PROG.

PLAY

Press and hold RECORD and PLAY on the remote, or

press RECORD on the recorder.

● The recorder spends approximately 7 seconds assessing

the condition of the tape, then begins recording.

● "B.E.S.T." appears on screen and blinks when

adjustment is complete.

RECORD

OSD (

Display Panel Indication [E639EE only]

)

As the tape check progresses, the “– –” marks on the display

panel increase upward.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES:

● The B.E.S.T. system works for SP and LP (or EP) modes only

after a tape has been inserted and the Record mode is first

initiated. It does not work during recording.

● In the case of timer recording, the B.E.S.T. system works

before recording is initiated.

● Once the cassette is ejected, the B.E.S.T. data is cancelled.

The next time the cassette is used for recording, B.E.S.T. is re-

performed.

ATTENTION:

Since the B.E.S.T. system works before recording actually

starts, there is a delay of approximately 7 seconds after

RECORD and PLAY on the remote are pressed, or RECORD

on the recorder is pressed. To make sure you record the

desired scene or programme in its entirety, first perform the

following steps:

1) Press and hold PAUSE and RECORD to engage the

RECORD PAUSE mode.

● The recorder then automatically checks the condition

of the tape and, after approximately 7 seconds, re-

enters RECORD PAUSE.

2) Press PLAY to start recording.

● If you want to bypass the B.E.S.T. system and begin

recording immediately, set “B.E.S.T.” to “OFF” in step

3 on page 18.

Playback

The recorder assesses the quality of the tape once you initiate

playback.

When watching a tape recorded with “B.E.S.T.” set to “ON”, it

is recommended that you leave B.E.S.T. on during playback as

well.

PAUSE

RECORD

START PLAYBACK

Press PLAY.

● The recorder adjusts the playback picture quality

based on the quality of the tape in use.

● B.E.S.T. is active during Auto Tracking.

"B.E.S.T." appears blinking on the screen.

NOTES:

● When watching a rental tape, or one recorded on another

video recorder, set B.E.S.T. to your preference by performing

steps 2 through 4 on page 18.

● "B.E.S.T." only appears at the beginning of automatic tracking.

Even though it doesn't appear after that, the B.E.S.T. function

is operative.

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING

Before performing the following steps:

● Insert a cassette with the safety tab in place. The recorder will

come on automatically.

● Turn on the TV and select the VIDEO channel (or AV mode).

● Select the appropriate colour system by pressing the

COLOUR SYSTEM button.(੬ pg. 24)

Timer

Programming

ACCESS MODE SELECT

SCREEN

Remember, the clock must be set before you can

programme the timer (੬ pg. 9).

Press PROG.

ACCESS TIMER PROGRAM-

MING SCREEN

Press TV PROG.5/∞ to

place the pointer next to

TIMER PROGRAMMING

CLOCK SET

"TIMER PROGRAM-

MING", then press OK on

the remote control.

[TV PROG5 ] =

∞

[CANCEL] :EXIT

ENTER PROGRAMME

START TIME

or "4(∞)" to enter the time

you want recording to

start.

Press NUMBER key "1(5)"

– P1–

START

21:00

STOP

– –:– –

PROG.

DATE

25.12

TV PROG.

– –

]

● Press and hold either

button to delay or

advance the time by 30

minutes.

[1–6] [TV PROG5

∞

NUMBER

[PROG./CLOCK] :NEXT

WEEKLY

TIMER

● If the Programme is already used, press PROG. until a

vacant Programming screen appears.

CANCEL

ENTER PROGRAMME STOP

TIME

SP/LP/EP

Press NUMBER key "2(5)"

– P1–

or "5(∞)" to enter the time

you want recording to

stop.

START

21:00

STOP

22:00

DATE

25.12

TV PROG.

– –

● Press and hold either

button to delay or

advance the time by 30

minutes.

[1–6] [TV PROG5

]

∞

[PROG./CLOCK] :NEXT

ENTER PROGRAMME DATE

Press NUMBER key "3(5)" or "6(∞)" to enter the date.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENTER CHANNEL

SELECT PROGRAMME

appears.

Press PROG. until the programme you wish to call up

POSITION

Press TV PROG.5/∞ to

– P1–

● Each time you press PROG. the next programme's

information appears up to "P8" (Programme 8).

● If you want to make a correction, use NUMBER key

"1" – "6" and TV PROG.5/∞.

select the channel you

START

21:00

STOP

22:00

wish to record.

DATE

25.12

TV PROG.

]

● If you want to cancel a programme, press CANCEL.

[1–6] [TV PROG5

∞

[PROG./CLOCK] :NEXT

RETURN TO NORMAL

SCREEN

SET TAPE SPEED

Press PROG. as many times as necessary to return to

Press SP/LP/EP to set the tape speed.

normal screen.

● For each additional programme, press PROG. and

repeat steps 3 – 7.

● Press TIMER to engage the recorder's timer mode.

RETURN TO NORMAL

SCREEN

Auto SP/LP Timer

If, when recording in SP mode, there is not enough tape to

record the entire programme, the recorder automatically

switches to LP mode (with PAL broadcasts) or EP mode (with

NTSC broadcasts) to allow complete recording.

Press PROG. as many times as necessary to return to

normal screen.

ENGAGE AUTO SP/LP

TIMER

ENGAGE RECORDER’S

TIMER MODE

Press AUTO SP/LP TIMER on the recorder front panel.

Press TIMER.

The button lights “orange”.

For Example . . .

Recording a PAL-broadcast program of 210 minutes in

length onto a 180-minute tape

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 3 through 7, press WEEKLY (NUMBER

key “9”) for weekly serials or DAILY (NUMBER key “8”) for

daily serials (Monday–Friday).

Approximately 150 minutes

Approximately 60 minutes

LP mode

SP mode

Total 210 minutes

Make sure you press AUTO SP/LP TIMER before

NOTES:

performing timer programming.

● You can programme this recorder to timer-record as many as

8 programmes. To record the extra programme, you must first

cancel any unnecessary programmes (੬ Check And Cancel

Programmes).

NOTES:

● The Auto SP/LP Timer feature is not available during ITR

(Instant Timer Recording), and the feature will not work

properly with any tapes longer than E-180 as well as some

tapes of shorter lenghs.

● For safety, your recorder disables all other functions while in

the Timer mode. If you want to use the recorder but its Timer

mode is engaged, press TIMER and all other functions are

operable. To re-engage the timer, press TIMER.

● In case of a power failure after programming, the recorder’s

memory backup keeps your selections for 18 hours.

● Backup time becomes shorter as the unit's internal parts

become old. When this occurs, please consult your nearby

JVC dealer.

● Even if, in step 1, you press AUTO SP/LP TIMER and it lights

“orange”, that doesn’t mean that the recorder will automati-

cally change from SP to LP (or EP) mode during the course of

the recording. Watch the tape later to confirm.

● If you have programmed the recorder to timer-record 2 or

more programs, the second programme and those thereafter

may not fit on the tape if you engage the Auto SP/LP Timer

mode. In this case, make sure the mode is not engaged, then

set the tape speed manually during timer programming.

● There may be some noise at the point on the tape where the

recorder switches from SP to LP (or EP) mode.

Check And Cancel

Programmes

ACCESS TIMER PROGRAM-

MING SCREEN

Perform steps 1 and 2 of Timer Programming to call up

the Timer Programming screen.

● If the recorder is in the Timer mode, first press TIMER

to exit the mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING

You can use your video recorder as the source player or the

recording deck.

Edit To Or

From Another

Video

MAKE CONNECTIONS

Connect the player’s AUDIO/VIDEO OUT connector to

the recorder’s AUDIO/VIDEO IN connector.

For HR-E639EE Owners . . .

● When connecting to a monaural recorder, connect

your recorder's AUDIO L IN/OUT connector to the

AUDIO IN/OUT connector on the monaural recorder.

For HR-E539EE Owners . . .

● When connecting to a Hi-Fi recorder, connect your

recorder's AUDIO IN/OUT connector to the AUDIO

L IN/OUT connector on the Hi-Fi recorder.

Recorder

SET RECORDING DECK’S

INPUT MODE

Set to AUX. With this video recorder, press NUMBER

Key "0" or TV PROG.."F-AU"* will appear instead of a

channel number.

* "AU" will appear with HR-E539EE.

START SOURCE PLAYER

Engage its Play mode.

NUMBER "0"

TV PROG.

START RECORDING DECK

Engage its Record mode.

NOTES:

● All necessary cables can be obtained from your dealer.

● NTSC tapes being played back in the NTSC [ PAL mode

(੬ p. 25) cannot be dubbed to another recorder.

● When you dub an NTSC tape using your recorder as the

playback deck, select NTSC 3.58 (or NTSC 4.43) with the

COLOUR SYSTEM button. (੬ p. 24)

IMPORTANT:

● To edit, both the player and the recorder must be of the

same colour system. Press your recorder's COLOUR

SYSTEM button to select the appropriate colour system.

● For more information on multi-system compatibility,

੬ pg. 24.

TV Receiver

Player

Your recorder

Recorder

Your recorder

TV Receiver

AV Cable

(not provided)

AV Cable

(not provided)

VIDEO

CHANNEL

VIDEO

CHAN-

NEL

RF Cable

(provided)

RF Cable (provided)

Another recorder

Recorder

Player

Download from Www.Somanuals.com. All Manuals Search And Download.

You can use a camcorder as the source player and your video

recorder as the recorder.

Edit From A

Camcorder

MAKE CONNECTIONS

connectors to the recorder’s front panel AUDIO/VIDEO

input connectors.

Connect the camcorder’s AUDIO/VIDEO OUT

For HR-E639EE Owners . . .

● When using a monaural camcorder, connect its

AUDIO OUT connector to the AUDIO IN L connec-

tor on your recorder.

For HR-E539EE Owners . . .

● When using a Hi-Fi camcorder, connect the

camcorder’s AUDIO OUT L connector to the AUDIO

IN connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the

recorder. Refer to the camcorder’s instruction manual

for operating procedure.

NUMBER "0"

SET RECORDER’S INPUT

MODE

Press NUMBER key “0”. “F-AU”* appears in place of a

channel number.

* "AU" will appear with HR-E539EE.

START CAMCORDER

Engage its Play mode.

START RECORDER

Engage its Record mode.

Recorder

Your recorder

NOTE:

Connections made to the front panel AUDIO/VIDEO input

connectors automatically override those made to the rear panel

AUDIO/VIDEO input connectors.

IMPORTANT:

To the rear panel PAUSE

connector

VIDEO

AUDIO

● To edit, both the player and the recorder must be of the

same colour system. Press your recorder's COLOUR

SYSTEM button to select the appropriate colour system.

● PAL, SECAM and NTSC camcorders can be used as a

player for editing.

● For more information on multi-system compatibility,

੬ pg. 24.

AV Cable (not provided)

AUDIO OUT

Editing Cable

(not provided)

Camcorder

VIDEO OUT

EDIT

Player

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION ON MULTI-SYSTEM COMPATIBILITY

Setting Of The Colour System Select Buttons

Use the COLOUR SYSTEM button on the recorder's front panel

to select the colour system. Pressing this button changes the

mode as illustrated on the left. The On-Screen display will show

which mode is selected.

Mode

AUTO

Mode Display

Description

AUTO

Usually set to this mode. This mode

(Colour Signal) automatically detects PAL, NTSC, SECAM

or MESECAM and adjusts to the colour

system being recorded or played back.

When it does not perform properly, set the

colour system manually.

NTSC 3.58

NTSC 4.43

NTSC PAL*

PAL

COLOUR

SYSTEM

MANUAL

For recording, there is a choice of 4

(Colour Signal) selectable modes; PAL/MESECAM/NTSC

3.58/NTSC4.43. Select the mode that

matches the colour signal being received.

For playback, there is an additional mode

which allows NTSC tapes to be played

back and viewed on PAL TVs.

MESECAM

NOTES:

* "NTSC [ PAL" appears during playback only.

● In the AUTO mode, NTSC signals will be automatically

recorded as NTSC 3.58.

● In the AUTO mode, NTSC tapes will be played back as NTSC

3.58.

● SECAM signals will always be recorded as MESECAM. Select

the AUTO or the MESECAM mode when recording SECAM

signals.

● When playing back a SECAM tape, select the AUTO or the

MESECAM mode. The playback picture will always be

monochrome.

● In the NTSC4.43 mode, with some TVs, on-screen displays

(Program screen etc.) may roll up or down and there may be a

loss of colour. When this happens, select the AUTO mode.

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G and D/K, and SECAM B/G and D/K broadcasts.

TV system

HR-E639EE/HR-E539EE

Recorded tape

PAL

Recording circuit

PAL

PAL B/G, D/K

MESECAM

Multi-system

MESECAM

tuner

SECAM B/G,

D/K (OIRT)

(B/G, D/K)

NTSC 3.58

NTSC 4.43

NOTE:

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape

HR-E639EE/HR-E539EE

PAL

Playback circuit

Multi-system receiver

PAL

MESECAM

NTSC

PAL

(B/G, D/K)

MESECAM

Built-in

RFconverter

G, K

RF OUT

[

NTSC PAL

NTSC 3.58 MHz

Multi-system monitor

Manual switching

Manual

switching

PAL

SECAM

NTSC 3.58

NTSC 4.43

NTSC 4.43 MHz

VIDEO OUT

AUDIO OUT

NOTES:

When viewing NTSC tapes on a PAL TV set:

● The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the

part of the video recorder nor the TV.

● The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if

the TV does not have a V-HOLD control.)

● During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system

select switch of the TV is adjusted to the AUTO position. In such a case, change the setting of the colour system select switch of

the TV to the position which corresponds to the setting (G or K) of the RF converter system select switch on the rear panel of the

recorder.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape

Playback equipment

HR-E639EE/HR-E539EE

Dubbed tape

PAL

MESECAM

SECAM

PAL

MESECAM

SECAM

MESECAM

Recording circuit

NTSC 3.58 MHz

NTSC 4.43 MHz

NTSC 3.58 MHz

NTSC 4.43 MHz

NTSC

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL

Your remote control can operate the basic functions of your TV

set. In addition to JVC TVs, other manufacturer’s TVs can also

be controlled by setting the appropriate switch on the remote

control.

Multi-Brand

Remote

Before you start . . .

● Turn on the TV using its remote control.

● Set the remote control’s TV/VCR switch to TV.

NOTE:

to step 2.

If your TV is a JVC, you don’t have to set the code in step 1. Go

Control

SET TV BRAND CODE

Refer to the chart below. While holding down OPER-

OPERATE

ATE, enter your TV’s brand code using the NUMBER

keys, then press STOP.

● You don’t have to repeat this step until you replace

your remote control’s batteries.

NUMBER

TRY OPERATING TV

Press OPERATE on the remote to turn the TV off. If it

goes off, try other operations.

● The OPERATE button, TV/VIDEO button, TV PROG.

TV PROG.

TV/VCR

+/– (or %/ﬁ)

5/∞ button, TV VOL.

button and MUTE

button on the remote can all be used to operate the

TV.

TV VOL. +/-

DIGIT ENTRY

● To return the remote to video recorder control, set its

TV/VCR switch to VCR.

IMPORTANT

Although the provided remote control unit is compatible with

JVC televisions, as well as many other models, it may not work

with your TV, or in some instances, may have limited function

capability.

PUSH JOG

Control Your TV Using Addi-

tional Buttons

The NUMBER keys on the remote can also be used to select

the TV’s channel by setting the remote control to the TV mode.

1 Set the TV/VCR switch to TV.

2 Use the NUMBER keys, and the DIGIT ENTRY (

button, the PUSH JOG button, the DISPLAY button or

the OK button to select the TV’s channel.

)

CODE

TV BRAND NAME

● With televisions under Code 01, 03, 04, 06, 07, 10 or 11,

the DIGIT ENTRY button corresponds to the 1-digit/2-

digit entry switching button (often labelled – /– –) of your

TV’s remote control.

● With televisions under Code 01, 08 or 09, the PUSH JOG

button corresponds to the 10 + button, and the PUSH

JOG button corresponds to the 20 + button of your

TV’s remote control.

● With televisions using Code 09, the DISPLAY button

corresponds to the 30 + button.

● With televisions using Code 06, the OK button corre-

sponds to the ENTER button of your TV’s remote control.

JVC

BRANDT, NORDMENDE, SABA, TELEAVIA,

TELEFUNKEN, THOMSON

FERGUSON

PHILIPS

BLAUPUNKT, GRUNDIG

SONY

PANASONIC

GRAETZ, ITT, LUXOR, SALORA, SELECO

MIVAR

HITACHI

TOSHIBA

MITSUBISHI

FINLUX

NOKIA

SHARP

NOTE:

The way these buttons are used is determined by your TV.

Use these buttons as instructed for your TV’s remote

control.

SAMSUNG

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily

corrected, and this can save you the trouble of sending your video recorder off for repair.

POWER

SYMPTOM

1. No power is applied to the

recorder.

POSSIBLE CAUSE

● The mains power cord is discon-

nected.

CORRECTIVE ACTION

Connect the mains power cord.

2. The clock is functioning properly,

but the recorder cannot be

powered.

● “TIMER“ is displayed on the display

panel.

Press the TIMER button to turn the

"TIMER" indicator off.

TAPE TRANSPORT

SYMPTOM

1. The tape does not run during

recording.

POSSIBLE CAUSE

● The recorder is in the Pause mode.

CORRECTIVE ACTION

Press PLAY to disengage the Pause

mode.

2. The tape stops during rewind or

fast-forward.

● “M“ is displayed on the display

panel.

Press C.MEMORY to deactivate the

Counter Memory function and turn

the “M“ indicator off.

3. The tape will not rewind or fast-

forward.

● The tape is already fully rewound or

fast-forwarded.

Check the cassette.

PLAYBACK

SYMPTOM

1. The playback picture does not

appear while the tape is running.

POSSIBLE CAUSE

CORRECTIVE ACTION

If you are using the RF OUT connec-

tion, set the TV receiver to the RF

converter channel (UHF 36). (੬ pg. 3)

● If you’re using the RF OUT connec-

tion, the TV receiver’s channel

selector is set to the wrong video

channel.

● If you’re using the AV connection,

the TV receiver is not set to the AV

mode.

If you are using the AV connection,

set the TV to its AV mode.

2. Noise appears during visual search.

● This is normal.

3. Noise appears during normal

playback.

● The automatic tracking mode is

engaged.

Try manual tracking. (੬ pg. 12)

4. Noise appears during slow-motion

playback.

● The automatic tracking mode is

engaged.

Try manual tracking. (੬ pg. 12)

5. Noise appears during still play-

back.

Press TV PROG. 5 or ∞ a few times to

remove the noise bars from the screen.

6. [E639EE only] Breaks are noticeable

in Hi-Fi soundtrack.

● Automatic tracking is engaged.

Engage and adjust tracking manually.

(੬ pg. 12)

7. The playback picture is blurred or

interrupted while TV broadcasts are

clear.

● The video heads may be dirty.

Consult your JVC dealer.

8. Playback picture has a loss of

colour.

● The wrong colour system is selected

Select the correct colour system by

pressing the COLOUR SYSTEM

button. (੬ pg. 24)

Once recorded, the signal cannot be

corrected. Be sure to choose the

correct setting before recording.

for the tape being played back.

● The wrong colour system was

selected during recording.

9. No sound accompanies the

playback picture.

● The SYSTEM switch on the

recorder's rear panel is set to the

wrong position.

Set it to the correct position for the

TV broadcast system used in your

area. (੬ pg. 4.)

CONTINUED ON NEXT PAGE.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING (cont.)

RECORDING

SYMPTOM

1. Recording cannot be started.

POSSIBLE CAUSE

● There is no cassette loaded, or the

cassette loaded has had its Record

Safety tab removed.

CORRECTIVE ACTION

Insert a cassette, or using adhesive

tape, reseal the slot where the tab

was removed.

2. TV broadcasts cannot be recorded.

3. Tape-to-tape editing is not possible.

● “AU” has been selected as the input

Set to the desired channel.

mode.

● The source (another video recorder,

camcorder) has not been properly

connected.

Confirm that the source is properly

connected.

● All necessary power switches have

not been turned on.

● The input mode is not correct.

Confirm that all units’ power switches

are turned on.

Set the input mode to “AU”.

4. Camcorder recording is not

possible.

● The camcorder has not been

properly connected.

Confirm that the camcorder is

properly connected.

● The input mode is not correct.

Set the input mode to “AU”.

TIMER RECORDING

CORRECTIVE ACTION

Re-perform the clock and/or timer

settings.

Press TIMER and confirm that “TIMER“

is displayed on the display panel.

SYMPTOM

1. Timer recording won’t work.

POSSIBLE CAUSE

● The clock and/or the timer have

been set incorrectly.

● The timer is not engaged.

Timer programming can’t be

performed while a timer recording is

in progress. Wait until it finishes.

● Timer recording is in progress.

2. On-screen timer programming is

not possible.

Load a cassette with the Record

Safety tab intact, or cover the hole

using adhesive tape.

● The timer is engaged but there’s no

cassette loaded.

3. “TIMER“ and “]“ on the display

panel won’t stop blinking.

● The loaded cassette has had its

Record Safety tab removed.

Remove the cassette and cover the

hole with adhesive tape, or insert a

cassette with the Record Safety tab

intact.

4. The cassette is automatically

ejected, and “TIMER“ and “]“

on the display panel won’t stop

blinking.

Check the programmed data and re-

program as necessary, then press

TIMER again.

● TIMER has been pressed when there

are no programs in memory, or the

timer record information has been

programmed incorrectly.

5. “TIMER“ blinks for 10 seconds and

the Timer mode is disengaged.

The programme may not have been

recorded in its entirety. Next time

make sure you have enough time on

the tape to record the entire

programme.

● The end of the tape was reached

during timer recording.

6. The cassette is automatically

ejected, the power shuts off and

“TIMER“ and “]“ won’t stop

blinking.