COLOUR VIDEO CAMERA
TK-C1430
INSTRUCTIONS
TK-C1431
CAMERA
VIDEO
COLOR
LOOK
BF
DIGITAL
® is a registered trademark owned by Victor Company of Japan, Limited.
® is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
© 2005 Victor Company of Japan, Limited.
Printed in Thailand
LWT0276-001A-H
LWT0276-001A-H
E-
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing this product.
Safety Precautions
(These instructions are for TK-C1430E and TK-C1431EG)
Before beginning to operate this unit, please read the instruction manual
carefully in order to make sure that the best possible performance is obtained.
Due to design modifications, data given in this
instruction book are subject to possible change
without prior notice.
CONTENTS
WARNING:
INTRODUCTION
TO REDUCETHE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSETHIS APPLIANCETO RAIN
OR MOISTURE.
Features ...............................................................................................................................6
Operating Precautions .........................................................................................................7
Controls, Connectors and Indicators ...................................................................................8
CONNECTION/INSTALLATION
RM-P2580 System.............................................................................................................12
Procedures ........................................................................................................................14
Mounting the lens ..............................................................................................................15
Installing the ferrite core ....................................................................................................16
Connections on the back ...................................................................................................16
Mounting the camera .........................................................................................................18
Lens adjustment ................................................................................................................20
Back focus adjustment ......................................................................................................21
Auto white balance control adjustment .............................................................................22
AVERTISSEMENT:
POUR EVITER LES RISQUES
D’INCENDIE OU D’ELECTRO-
CUTION, NE PAS EXPOSER
L’APPAREIL A L’HUMIDITE OU A LA
PLUIE.
MENU SETTING
Setting the menu ...............................................................................................................23
The flow of menu screen ...................................................................................................24
SYNC ADJUST Screen .....................................................................................................26
ALC SETTINGS Screen ....................................................................................................26
VIDEO ADJUST Screen ....................................................................................................31
MODE SELECT Screen ....................................................................................................32
MOTION DETECT Screen.................................................................................................34
COMMUNICATION Screen ...............................................................................................35
MAINTENANCE Screen ....................................................................................................35
FACTORY SETTINGS Screen ..........................................................................................35
BLC EDITTING Screen .....................................................................................................36
Manual Adjustment of White Balance ...............................................................................37
CAMERA TITLE Setting ....................................................................................................38
Setting the MOTION DETECT Function ...........................................................................39
Output of Black-White/Colour switching signal .................................................................40
Control by Black-White/Colour switching signal from the outside ....................................41
White spot compensation ..................................................................................................42
OTHERS
Specifications.....................................................................................................................43
E-4
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Features
Operating Precautions
● To save energy, when it is not being used
turn the system’s power off.
● This camera has been designed for indoor
use. When you use it outdoors, be sure
to use a housing or the like.
● Do not install or use the camera in the
following places.
• In a place exposed to rain or moisture.
• In a place with vapor or oil soot, for
example in a kitchen.
• When the ambient temperature rises
above or falls below the acceptable
range (from –10°C to 50°C).
• Near a source of radiation, X-rays,
strong radio waves or magnetism.
• In a place subject to vibration.
● Observe the following when carrying out
camera maintenance.
• Turn the power OFF before proceeding
Ⅲ A DSP (Digital Signal Processor) features
a Extended Dynamic Range (ExDR) and
enables to shoot both bright and dark
locations.
Ⅲ Before starting an important recording,
be sure to perform a test recording in
order to confirm that a normal
recording is possible.
to carry out maintenance.
If it is contaminated seriously, clean the
contaminated part with a cloth (or a
tissue) which has been soaked in a
solution of water and a neutral detergent.
● The unit is to be powered by a DC 12 V
or an AC 24 V power supply. (TK-C1430E)
The AC 24V power supply should conform
to the following: Isolated power supply
only
Ⅲ We do not accept liability for the loss of
a recording in the case of it becoming
impossible to record due to a problem
in the video camera, VCR or video tape.
Ⅲ We do not accept liability for any
damage to the camera in cases where
it is dropped because of bad installation
due to failure to observe the installation
instructions correctly.Please be careful
when installing the camera.
Ⅲ The use of a CCD with a SENSE UP (X32)
function realized the minimum luminous
flux density for subject of 0.9 lx (F1.2,
50%, AGC 20dB) and 0.03 lx (at SENSE
UP (X32)).Furthermore, we realized 0.03
lx (F1.2, 50% AGC 20dB) thanks to the
function of B/W mode.
TK-C1431EG: Connect the power cable to
the commercial power supply of 220V –
240V.
Ⅲ A motion detector function detects the
motion inside an image and emits alarm
signals.
Ⅲ The motion detector is not a feature
which prevents theft, fire, etc. Even if
an accident should occur resulting in
damage, we do not accept any liability.
• In a place with excessive dirt.
● Caution for operating the video iris lens.
If the video iris lens is set to an extremely
low level, a malfunction – such as the
hunting phenomenon where the iris opens
and closes in voluntary – can occur.
In such a case, first set the “LEVEL”
potentiometer on the lens to the H position
(iris open), and then adjust it to an optimum
level. (੬ page 20)
● The cable stopper on the terminal block
can come off sometimes. Therefore, be
sure to take enough time and fix the cable
securely.
● When a highly bright subject is shot,
sometimes undulations can be observed
on the vertical lines of the subject.
However, this phenomenon is peculiar to
the unit and is not a sign of malfunction.
● The beat may sometimes appear on the
screen if gain is raised when the line lock
is in use, but the phenomenon takes place
due to the fluctuation of power frequency
and is not a malfunction.
● You may hear some noise when the
screen is switched between the colour
and the black and white mode, because
the optical filter moves. Also, black vertical
bands will appear on the screen.
● If this camera and the cables connected
to this camera are used where there are
strong electromagnetic waves or where
there is magnetism present, for example
near a radio or TV transmitter, power
transformer or an electric motor, the picture
may produce noise and the colours may
be affected.
● This camera incorporates an AGC circuit.
As a result, when it is used under low light
conditions, the camera sensitivity is
automatically boosted and the picture may
look uneven. However, this is not a
malfunction.
● While the AGC is activated, if transceiver
which causes strong electromagnetic
wave is at close distance, picture might
suffer from beat.
So please use the camera more than three
meters from such transceivers.
● When this camera is used in the ATW
mode, the recorded colours may be slightly
different from the actual colours due to the
operational principles of the auto-tracking
white balance circuit. However, this is not
a malfunction.
● If a high-intensity object (such as a lamp)
is shot, the image on the screen may have
vertical lines (smear) or blur (blooming)
at its periphery.This is a characteristic of
the CCD, and is not a defect.
Ⅲ The equipped Y/C terminals and RS-
422A/RS-485 terminals allow intended
compatibility with diversified systems.
Ⅲ Day/Night surveillance
When the light is low, the camera pictures
can be switched automatically to black
and white pictures.
Ⅲ Electronic zoom
The 10x electronic zoom allows
monitoring in far greater detail.
Characters and symbols used in this instruction manual.
CAUTION : Cautionary notes concerning operation of the unit.
MEMO
: Reference such as restrictions of features, etc.
: Reference page or item.
੬
● Set the Iris Selector switch to VIDEO to
use the manual lens.
E-6
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Controls, Connectors and Indicators
SET
AWC
CAMERA
SETUP
ON
LL
EXT TERM-OFF
INT/GL
MENU
SIMPLEX
DUPLEX
RX TERM-OFF
ON
NOT USED
IRIS
VIDEO
DC
Lens mount
To attach the lens.
This is applicable to both C-mount lenses
and CS-mount lenses.
Camera-mounting bracket
Cover
[SET/AWC] Set. Auto White Control
Button
SET: Press this button to display a sub-
menu.
1
2
4
8
9
12
The bracket has been attached on the
bottom of the camera before shipment. It
can also be attached on the top
according to the circumstance.
To re-attach the bracket use the threaded
holes at the top, with the camera
The cover slides open when push to the
left.
[VIDEO/DC] Iris Selector Switch
This should be set according to the type
of lens if an automatic iris control lens is
used.
VIDEO: In case of lens with EE amp built-
in.
(੬ Page 23)
Back focus adjustment ring
Adjusting the back focus during lens
installation.
AWC: If this button is kept pressed for
more than 1 second, a one-push-
auto-white-balance function works
and sets the white balance. Once
it is set, even if colour temperature
changes, white balance does not
change. It is also possible to make
fine adjustments on the set white
balance.
mounting bracket fixing screws
.
7
When readjustment is required, loosen
the locking screw
counterclockwise and turn the back focus
adjustment ring
by turning it
Camera-mounting screw
hole (1/4 inch)
Use this hole when mounting
the camera onto a fixer, pan/
tilt unit, and the like. (Use a
screw shorter than 7 mm.)
3
5
DC:
In case of lens without EE amp
built-in.
.
2
After the adjustment, tighten the locking
screw again.
MAX.
7mm
(DC: At time of factory shipment)
3
[IRIS] Iris Terminal
This is connected to an automatic iris
control lens.
10
11
[BF LOCK] Back focus locking screw
This serves to fix the back focus-adjusting
ring.
3
(੬ Page 22)
Rotation-preventive hole
6
7
Make use of this rotation-preventive hole
to prevent any fall when mounting the
camera. Always make sure that the
camera is securely mounted.
(੬ Page 15)
[MENU] Menu Button
When pressed, a menu screen is brought
up.
Camera mounting bracket fixing screws
(×2: M2.6 × 6 mm)
(੬ Page 23)
Be sure to use a 6 mm long screw.
E-8
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Controls, Connectors and Indicators (Continued)
[
,
,
,
] Up-and-down, left-and-
SIMPLEX:
13
14
(
)
⁄
)
right Button
This switch sets to SIMPLEX when the
transmission between the camera and a
remote control unit is in a simplex system
(one-way).
⁄
fl
These buttons select items on the menu
screen and change a set value.
(੬ Page 23)
+
1
-
2
(DUPLEX: At time of factory shipment)
[EXT.TERM-ON/OFF] Terminal On/Off
Switch of External Synchronization
Signal
TX+ TX-RX+ RX- AUX GND
TX+ TX-RX+ RX- AUX GND
[RX.TERM-ON/OFF] RX SignalTerminal
ON/OFF Switch
17
A
B
C
D
A
B
C
D
This is a terminating ON/OFF switch for
the external synchronization input signal.
When this is switched ON, termination is
executed via a 75 1 resistor.
This sets whether or not the signal
Y/C OUT
Y/C OUT
fi
›
fi
›
between RX + and RX – on the back
20
SYNC IN
POWER
VIDEO OUT
SYNC IN
POWER
VIDEO OUT
should be terminated at the value of
1101 resistance.
ON: Terminated.
SEE INST-
SEE INST-
RUCTION
MANUAL
RUCTION
MANUAL
ON: terminates at 751.
OFF: does not terminate at 751.
(ON: At time of factory shipment)
OFF: Not terminated.
‹
¤
‹
¤
If the system including the camera is the
M.DROP (Multi-drop, RS-485) system,
only the last camera mounted along the
control signal cable is set to “ON” and
the other cameras are set to “OFF”. In
case of the M.DROP system, it becomes
necessary to set the Machine ID. (੬ Page
35)
If the system including the camera is the
P TO P (Point to Point, RS-422A) system,
set this switch of all the cameras to “ON”.
The item STYLE on the COMMUNICA-
TION screen sets M.DROP or P TO P
(੬ Page 35)
TK-C1430E
TK-C1431EG
Signal
[INT/GL, LL] Selector Switch for
Synchronizing System
This switch sets the synchronizing system
for the camera.
INT/GL:
This is set for internal synchronization
(INT) or external synchronization (GL).
LL (Line Lock):
The camera’s vertical synchronization is
locked to the AC power line frequency.
When switching between multiple
cameras using a switcher, selecting this
mode and adjusting the vertical phase
can reduce the monitor sync disturbances
occur that when the camera image is
switched. (This cannot be used in regions
where the power frequency is 60 Hz)
(INT/GL: At time of factory shipment)
15
[DC 12V, AC 24V] Power input terminals
(TK-C1430E)
To input DC 12V or AC 24V power.
19
20
Pin No.
1
2
3
4
GND
GND
Luminance (Y)
Chrominance (C)
[TX+A, TX-B, RX+C, RX-D] Control
signal connection terminals
Terminals for inputting signals with
electrical characteristics conforming to
the EIA/TIA RS-422A or RS-485 standard.
[VIDEO OUT] Video signal output
connector
This BNC connector outputs a composite
video signal. Connect this to the video input
connector of a video monitor, switcher, etc.
23
੬
RX.TERM switch
17
[AUX, GND] Auxiliary Input/OutputTerminals
If there is any change in the area set on the
MOTION DETECT screen, these terminals
outputthecorrespondingsignals.(੬Page34)
These terminals also output the B&W/
COLOUR signal. (੬ Page 30)
[Open-collector low signal. Maximum
voltage 30V, current 30mA.]
When carrying out B&W/COLOUR switching
using the control signal, the signals are input
through these terminals. (੬ Page 30)
[B&W: make; COLOUR: break]
21
[POWER] Power indicator lamp
This lamp lights when power is supplied
to the camera.
24
25
(ON: At time of factory shipment)
NOT USED
This cannot be used. Do not switch.
18
[SYNC IN] Sync signal input connector
This BNC connector accepts the input of
an external sync signal such as a composite
video (VBS) or black burst (BB) signal.
When a sync signal is input into this
connector, the camera operation is
automatically synchronized with the
external sync signal.
[DUPLEX, SIMPLEX] Selector Switch
for Transmission System
If the setting is changed, be absolutely
sure to switch on the power again.
DUPLEX:
This switch sets to DUPLEX when the
transmission between the camera and a
remote control unit is in a duplex system
(two-way).
16
[Y/C OUT] Y/C output connector
This 4-pin connector outputs the luminance
and chrominance signal.
22
To terminate this connector at 751, turn
ON the EXT.TERM switch
.
14
Power cable (TK-C1431EG)
Connect to the commercial AC (220V –
240V) outlet.
• Pin configuration ofY/C OUT connector
26
4
3
2
1
E-10
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION/INSTALLATION
RM-P2580 System
Ⅲ System with up to 8 cameras
Camera
Ⅲ Connecting the control signal cable
(Use a twisted-pair cable for connection. ੬ Page 17.)
Camera 1
TK-C1430
Control signal cable
control signal
connection terminals
Video signal cable
RM-P2580
Camera 1
Connect:
AC24V
TX+
TX
A
B
C
D
A RX
B RX
C TX
D TX
+
Power
cable
MACHINE ID:1
(Menu screen)
RX TERM: OFF
(switch)
or
Camera TX+ to RM-P2580 RX+
Camera TX– to RM-P2580 RX–
Camera RX+ to RM-P2580 TX+
Camera RX– to RM-P2580 TX–
The A B C D marks indicated on both the
camera terminals and the RM-P2580 termi-
nals facilitate correct connections. Connect
the terminals with identical marks.
DC12V
Camera
TK-C1430
RX+
+
RX
Camera 2
AC24V
or
DC12V
MACHINE ID:2
(Menu screen)
RX TERM: OFF
(switch)
Camera 2
control signal
connection terminals
Camera
TK-C1430
TX+
TX
RX+
RX
A
B
C
D
MONITOR
MONITOR
Camera 8
AC24V
or
DC12V
•
•
•
•
•
Time lapse VCR
SR-L910
REC STOP/EJECT REC
OPERATE
CAM SW
OUT
MACHINE ID:8
(Menu screen)
RX TERM: ON
(switch)
CHECK
VIDEO CATE RDER
PAUSE/
STILL
O
P
E
.
L
O
C
K
REVERSE
REW
PLAY
FF
COUNT/
CLOCK
SHIFT/TRACKING
SET/V.LOCK
RESET
/CANCEL
MENU
TIME
MODE
TIMER
REC
AL/PL
RESET
VIDEO IN
Ⅲ Setting the switches (੬ Page 10)
CAMERA
TO
Select the synchronization method of the
camera image.
SW COM
CAMERA
TO CAMERA
DATA
I
/
O
UNIT
R
X
+
R
X
-
T
X
+
T
X
-
COM
1
2
3
4
5
6
7
8
COM 9/1 10/2 11/3 12/4 13/5 14/6 15/7 16/8 COM AUTO ALARM COMCASMWERACOM
SERIAL-1
SERIAL-2
POWER
Set the switch on all cameras to LL (Line Lock)
and match with the V. PHASE.
(੬ Page 26.)
OFF
VIDEO INPUT
1
1
2
3
3
4
4
5
6
6
7
7
8
8
MONITOR
OUTPUT 2
Remote Control Unit
RM-P2580
MONITOR MONITOR
OUTPUT OUTPUT
AC INPUT
1
2
1
2
3
4
5
6
7
8
2
5
ON
VIDEO OUTPUT
EXT TERM-OFF
INT/GL
ON
LL
Set this switch to the DUPLEX
* If the setting is changed, be absolutely sure to
switch on the power again.
MONITOR
OUTPUT 1
SET
AWC
DUPLEX
SIMPLEX
ON
CAMERA
SETUP
EXT TERM-OFF
INT/GL
ON
MENU
LL
RX TERM-OFF
DUPLEX
SIMPLEX
ON
RX TERM-OFF
This is the connected example of the TK-C1430E.
NOT USED
NOT USED
IRIS
When controlling with any system except the RM-P2580, execute proper settings using
switches and menu screens according to the systems used. (੬ Page 14)
VIDEO
DC
Set this switch to ON (signal termination ON)
only on the camera placed at the end of the
control signal cable.
Set to OFF on all other cameras.
MEMO
• When operating a system using the RM-P2580, several cameras (up to 16) can be con-
nected and used on one control signal cable. Consequently, an incorrect switch setting on
just a single camera will cause the entire system to work incorrectly.
Ⅲ Setting on the MENU screen (੬ Page 35)
* If the setting is changed, escape from the menu screen once, and definitely switch on the power again.
Set to M.DROP
COMMUN I CAT I ON
Set to M.DROP when the RM-P2580 is used
• Confirm switch settings on the screen as follows.
q Confirm that the image from the camera to be checked
is displayed on the monitor.
MONITOR screen
(example showing camera ID as “05”)
S TYLE
MACH I NE I D
M. DROP
1
as a remote control unit. When controlling
from another machine, make sure that it
matches the communication system used.
w Turn OFF and then ON the AC power to the camera to
be checked.
e The camera begins the initial operation and characters
similar to those shown in the illustration on the right
appear on the monitor screen.
MACHINE ID setting switches
Set this item to match the RM-P2580 VIDEO
INPUT terminal number for each camera.
r Confirm that “DUPLEX” and “ID-□□” are displayed and
that the ID number is the correct number (the number
should be the same as the number of the VIDEO IN-
PUT terminal to which the camera is connected on the
rear panel of the RM-P2580).
When connecting
P RO T OCO L : D U P L E X I D - 0 5
● Turn OFF the power supply to all equipment to be used before making connections.
● Carefully read the Instructions for each piece of equipment to be used before making
connections.
● For the appropriate connection cables and the length of these, carefully read “Connections
on the back” on page 16.
● The control signal cable cannot be used for loop connection.
The number shown in the
□□ part of ID-□□
should be correct.
“DUPLEX” should
be displayed.
t If wrong, set the camera ID again.
E-12
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION/INSTALLATION
Procedures
Mounting the lens
Execute connection/installation according to the procedures described below.
Turn OFF the power supply to all equipment to be used before making carefully.
Mount the lens according to the procedures described below.
1. Before mounting a lens, check whether
it is a C-mount or CS-mount lens.
To change the mounting method, loosen
the back-focus locking screw (M 2.6)
using a Phillips head screwdriver, turn
the back-focus adjusting ring with your
fingers or the screwdriver and change
the mounting method.
4.Setting the switches
(੬ Page 13)
6.Back focus adjustment
(੬ Page 21)
SET
CAMERA
SETUP
EXT TERM-OFF
INT/GL
ON
As regards the dimension (b) of the area
to which the lens is to be installed as
illustrated on the left diagram, use the
one with less value than what’s shown
in the table below.
MENU
LL
K
C
DUPLEX
SIMPLEX
ON
O
L
F
B
RX TERM-OFF
IOT USED
(b)
VIDEO
DC
F
For both the C-mount and CS-mount,
never use whatever exceeds the dimen-
sion (b), as such will not allow normal
installation and damage the inner part
of the camera, resulting in a malfunc-
tion.
5.Lens adjustment
7.Auto white balance
control adjustment
(੬ Page 22)
(੬ Page 20)
(c)
1. Mounting the lens
(੬ Page 15)
3.Mounting the camera
(੬ Page 18)
3.
VIDEO
DC
Lens
Flange back (c) Dimension (b)
2.
C mount lens 17.526mm
CS mount lens 12.5mm
5.5mm or less
5.5mm or less
To controlling systems
such as RM-P2580
IRIS
VIDEO
DC
The F mark indicates a focal point.
4.
DC 12V/AC 24V
power supply
1
3
4
2. Mount the lens on the camera by turning
the lens clockwise. Adjust its position.
2.Connections
(੬ Page 16)
3. When using an auto-iris lens with an EE
amplifier, turn the switch to the “VIDEO”
side.When no EE amplifier is equipped,
turn the switch to the “DC” side.
2
To alarm terminals
such as switches
+
1
-
2
CAUTION:
TX+ TX-RX+ RX- AUX GND
A
B
C
D
4. If the lens has an auto-iris mechanism,
connect the lens cable after checking the
pin arrangement.
Always attach the fer-
rite core (supplied) to
the lens cable.
3
Genlock sync
1
Y/C OUT
signal generator
SYNC IN
POWER
VIDEO OUT
4
SEE INST-
If the lens cable has a different type of
plug, use the 4-P plug supplied.
RUCTION
MANUAL
2
(੬ Page 16)
Monitor
Attached 4 pin plugs
Lens
DC IRIS
VIDEO IRIS
This is the connected example of the TK-C1430E.
TK-C1431EG ੬ Page 17
1
3
Pin No.
(does not contain EE amplifier)
(contain EE amplifier)
–
1
2
3
4
Brake
9V [max 50mA]
NC
VIDEO
GND
Brake +
+
–
Drive
Drive
2 4
E-14
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION/INSTALLATION
Installing the ferrite core
To retain electromagnetic compatibility, use the ferrite cores provided when connecting to
the lens.
MEMO
• If thin cables are used (i.e. with a high resistance), a significant voltage drop will occur when
the unit is at its maximum power consumption. Either use a thick cable to restrict the voltage
drop at the camera side to below 10%, or place the power supply near to the camera. If
voltage drop occurs during operation, the performance will be unstable.
• Attach the cable conductors so that they do not come into contact with the drop prevention
wires.
Video-iris lens
(or galvanometnc-iris lens)
Wind once
• Do not allow input from both a DC 12 V and AC 24 V power supply at the same time.
• When using a DC 12 V power supply, ensure that the polarities of the cable are correct.
• The AC 24 V power supply should conform to the following: Isolated power supply only
VIDEO
DC
Ferrite core
Wire clamp
TK-C1431EG (AC220V – 240V)
Notes:
• Install the ferrite cores within 50 mm of the camera-side connectors. (Fasten the ferrite
core with the wire clamp provided.)
• If the LENS cable is short, please connect the cable to the camera without winding the
cable around the ferrite core.
Power cable connect to the commercial
AC220V – 240V outlet
CAUTION:
When you use this camera, the socket-out-
let shall be installed near equipment so
as to disconnect easily.
Connections on the back
Y/C OUT
Connect the DC 12 V or the AC 24 V power
supply to the DC 12V/AC 24V terminals. To
prevent connection errors or a cable
disconnection, we recommend the use of lug
plates for the connections.
Ⅲ Power supply
TK-C1430E (DC 12 V or AC 24V)
SYNC IN
POWER
VIDEO OUT
SEE INST-
RUCTION
MANUAL
The following table shows the connection
distances and connection cables provided
that 2-conductor VVF cables (vinyl-insulated
vinyl sheath cables) are used.
Ⅲ Control signal cables
Ⅲ Genlock connection
+
1
-
2
These cables should be connected only when
it is required to control the camera using the
RS-442A or RS-485 signals.The use of 0.65
4-conductor twisted pair cables is recom-
mended. With these cables, the maximum ex-
tension distance is 1,200 m.
With some systems, when the external sync
signal is a composite video or black burst sig-
nal genlocking by applying an external sync
input requires the horizontal phase (H
PHASE) and colour phase (SC COARSE) to
be adjusted.
TX+ TX-RX+ RX- AUX GND
A
B
C
D
Maximum extension
(reference)
100 m 260 m 410 m 500 m
Y/C OUT
Conductor
diameter
1.0’mm 1.6’mm 2.0’mm 2.6’mm
and more and more and more and more
SYNC IN
POWER
VIDEO OUT
SEE INST-
MEMO
RUCTION
MANUAL
Connect to the other
side in pairs like this.
A
B
TX+
TX
• Genlocking is not possible with a signal con-
taining too much jitter, such as a VCR or
videodisc playback signal.
-
C
D
RX+
RX
Connect to the other
side in pairs like this.
-
• For details, consult a JVC authorized dealer.
E-16
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION/INSTALLATION
Mounting the camera
When mounting the camera on a fixer, pan/
tilt, etc., use the camera mounting screw hole
located on the camera-mounting bracket.
Installation of camera
q
•
Mounting from the bottom
Camera mounting
screw hole
This camera is originally designed to be
mounted from the bottom, as shown q.
The hole is standard photographic pan-
head screw size (1/4-20 UNC). Example
the Fixing unit or Pan/Tilt unit.
Camera-mounting bracket
CAUTION:
IRIS
VIDEO
DC
Use the screw with a
length shorter than 7mm
from a camera-mounting
•
Mounting from the top
face.
MAX.
7mm
Remove the CAMERA MOUNTING
BRACKET from the bottom of the camera
by removing two fixing screws as shown
w. Attach the CAMERA MOUNTING
BRACKET to the top, then mount the
camera on the Fixing Unit as shown e.
Make sure that two original screws are
used when mounting the CAMERA
MOUNTING BRACKET. Be sure to use a
6 mm long locking screw for the camera-
mounting bracket.
Furthermore, make use of the rotation
prevention hole to prevent the camera from
falling and securely mount the camera.
Special precautions must be taken for
mounting the camera on a wall or a ceiling.
We are not liable for any damage caused by
improper installation.
Rotation prevention hole
w
(This camera is used indoor and under
similar conditions.)
Fall Prevention
•
Exercise maximum caution when
installing the unit to the wall or ceiling. You
should not engage in the installation work
yourself. Ask a professional to do the job,
since the fall of the unit can result in
injuries and accidents.
Camera-
mounting bracket
-
2
+
1
Y
YU(TPE)
D
T
T
A
A
V
(ETYPE)
IOSLA
O
Y/C OUT
-
T
S
IN
E
E
S
CTION
RU
IDEO OU
L
UA
N
A
M
SYNC IN
•
•
When installing the unit on a fixer, Pan/
Tilt unit, etc., make sure to install it firmly
using a rotation-preventing hole provided
to prevent fall.
To prevent fall, connect the unit to a
section with sufficient strength (ceiling
slab or channel) using a fall prevention
wire such as a wire chain and the like.
Use the black screw on the back of the
unit for installation.
6mm
2mm
M3 x 6mm
Fixing screws
e
Pay utmost attention to the length of the
wire, too.
•
Specified screw (M3 × 6 mm)
Never use any screw longer than the
specified length as the inside can be
damaged.
IRIS
VIDEO
DC
E-18
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION/INSTALLATION
Lens adjustment
Back focus adjustment
Connect the camera according to the connection method, turn it on, display an image on the
monitor, and check the image.The camera has been factory-adjusted to the best position, but
it may need to be adjusted according to the object conditions or combination of lenses. If the
image is unnatural, adjust it as follows: (Also read the instruction manual of the lens.)
Ⅲ Back focus adjustment
Be sure to make back-focus adjustments when changing the lens mounting method or using
a different lens. If required, adjust it as follows:
● To make accurate back focus adjustments, use the electronic shutter and the ND filter,
and carry out the following adjustments in a state where the lens iris is released. (The ND
filter acts to reduce the amount of incident light entering the lens evenly over the entire
wavelength band.)
LEVEL
adjustment
• LEVEL adjustment
Monitor screen LEVEL turning direction
• With a fixed-focus lens
If the focus can not be adjusted correctly by
rotating the lens focus ring, adjust the back
focus as follows.
Too bright
Too dark
Counterclockwise (Toward L)
Clockwise (Toward H)
Back focus
adjustment ring
MEMO
1. Loosen the back focus locking screw by
turning it counterclocckwise ( ) with a
screwdriver.
• If the sensitivity adjustment LEVEL is
turned excessively to L, the sensitivity in-
creases because of the AGC function of
the camera, and the image looks grainy.
• If the video iris lens is set to too low a level,
malfunction such as the hunting phenom-
enon, in which the iris opens or closes
unintentionally, may occur.
2. Shoot a pattern closely.
Tighten
3. Turn the lens focus ring to ϱ.
K
LOC
ALC adjustment
(Does not operate.)
BF
Loosen
4. Turn the back focus adjustment ring to
focus at the best point.
Back focus locking
screw (M2.6)
MEMO
5. Tighten the back focus locking screw by
In such a case, first set LEVEL potentiom-
eter on the lens to the H (iris open) posi-
tion then adjust it to the optimum level.
Note that the lens cannot make ALC adjust-
ments. Make ALC adjustments using the item
AVERAGE: PEAK on the menu.
(੬ Page 26)
turning it clockwise ( ).
Lens focus ring
• With a zoom lens
If the image is out of focus when zooming
(telephoto wide-angle), adjust the camera as
follows:
1. Loosen the back focus locking screw by
turning it counterclocckwise ( ) with a
screwdriver.
MEMO
2. Shoot a comparatively dark scene with
• LENS FOCUS ADJUSTMENT MODE
At the time of focus adjustment, press the
thin lines.
3. Set the lens to the maximum telephoto
button
at the side of the unit for at least
position, and adjust the lens focus.
one second to open the lens iris and to fa-
cilitate focusing.At this time, “LENS FOCUS
ADJUSTMENT MODE” will be displayed on
the monitor screen.
When the adjustment has been completed,
press one of the buttons
4. Set the lens to the maximum wide-angle
position, and turn the back focus ring to
adjust the focus.
(Repeat steps 3. and 4. two or three
times.)
to can-
cel focus adjustment mode.
5. Tighten the back focus locking screw by
• Focus setting can differ on the colour and
on the black and white screen. Make ad-
justments so that the focus will come to the
optimum on both screens.
turning it clockwise ( ).
E-20
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
Setting the menu
MENU button
CONNECTION/INSTALLATION
Auto white balance control adjustment
Each light source has its own colour temperature. Therefore, when the main light source
lighting an object is changed, the white balance should be adjusted again by pressing the
AWC button.
4. Use the
,
button to set the
cursor (>) to a desired item.
ALC SET T I NGS
I R I S LE VEL
AVERAGE : PEAK
SHUTT ER / E x DR
AGC MODE
L OL UX MODE
SENSE UP
PR I OR I T Y
BLC
B&W/COLOUR MODE ..
NORMAL
8 :
NORMAL
2 0 dB
OFF
OFF
– – –
OFF
AWC button
SET button
2
1. Place a white object under the same
lighting condition as the object to be shot
and zoom in to fill the screen with white.
SET
CAMERA
SETUP
EXT TERM-OFF
INT/GL
ON
AWC
MENU
LL
2. When the AWC button is pressed for
approx. one sec., the white balance is
adjusted for the object being recorded.
DUPLEX
SIMPLEX
ON
RX TERM-OFF
NOT USED
IRIS
VIDEO
DC
5. Change the set value using the
3. During the time when the Auto White
function is operated, "AWC OPERA-
TION" is displayed (for approx. 0.5 sec.).
When the appropriate white balance is
acquired, "AWC OK" is displayed.
,
button.
Change of the set value displays a
change mark (›).
ALC SET T I NGS
I R I S LE VEL
-5
›
AVERAGE : PEAK
SHUTT ER / E x DR
AGC MODE
8 :
2
NORMAL
2 0 dB
OFF
OFF
– – –
4. Error message display
● NG : OBJECT
L OL UX MODE
SENSE UP
PR I OR I T Y
AWC OPERATION
AWC
OK
1. Press the MENU button.
Displayed when there is not enough
white colour on an object or the colour
temperature is not suitable.
By taking a shot of a white object to
fill the screen, adjust the white balance
again.
BLC
OFF
The MENU screen is displayed.
B&W/COLOUR MODE ..
DURING OPERATION
DISPLAYING RESULT
2. Set the cursor (>) to a desired
If you wish to change the set values of
another items, repeat items 2. to 5.
above.
sub-menu using the
,
button.
MENU
● ERROR : LOW LIGHT
S YNC ADJ UST ..
ALC SE T T I NGS ..
V I DEO ADJ UST ..
MODE SE L ECT ..
Displayed when the light is low. In-
crease the illumination then re-adjust
the white balance.
6. Press the MENU button.
The screen returns to the previous one
(MENU screen).
AWC NG : OBJECT
AWC ERROR : LOW LIGHT
MOT I ON
TECT ..
DE
COMMUN I CAT I ON ..
MA I NTENANCE ..
F ACTORY SETT I NGS ..
● ERROR : HIGH LIGHT
Displayed when the light is too bright.
Decrease the illumination then re-ad-
just the white balance.
7. Press the MENU button.
The screen returns to the normal screen
(quitting the menu display).
OBJECT ERROR
LOW LIGHTING
3. Press the SET button.
The selected sub-menu screen is
displayed.
MEMO
* When the setting is executed using the RM-
P2580, use a joy stick instead of the
button.
Even if you press the AWC button, the white
balance will not be re-adjusted during the
operation in the black-and-white mode.
AWC ERROR : HIGH LIGHT
ALC SET T I NGS
I R I S LE VEL
AVERAGE : PEAK
SHUTT ER / E x DR
AGC MODE
L OL UX MODE
SENSE UP
NORMAL
8 :
NORMAL
2 0 dB
OFF
2
OVER LIGHTING
OFF
PR I OR I T Y
– – –
BLC
OFF
B&W/COLOUR MODE ..
E-22
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
The flow of menu screen
੬ Page 26
੬ Page 27
MENU
SYNC ADJUST
SHUTTER / Ex DR
V
H
PHASE
PHASE
SHUTT ER SPEED
F AST I M I T
E DR LEVEL
1
/
120
S YNC ADJ UST ..
ALC SE T T I NGS ..
– – –
– – –
– – –
L
x
V
I
DEO ADJ UST ..
MODE SE L ECT ..
MOT I ON TECT ..
SC COARSE
SC I NE
F
M . E xDR SPEED
DE
COMMUN I CAT I ON ..
MA I NTENANCE ..
੬ Page 26
F ACTORY SETT NGS ..
I
ALC SET T NGS
I
I R I S LE VEL
AVERAGE : PEAK
SHUTT ER / E x DR
AGC MODE
LOL UX MODE
SENSE UP
NORMAL
8 :
NORMAL
2 0 dB
OFF
2
OFF
੬ Page 37
WH I T E BALANCE CONTROL
AWC SE T ..
੬ Page 31
੬ Page 36
PR I OR I T Y
BLC
– – –
OFF
V I DEO ADJ UST
B&W/COLOUR MODE ..
WH I TE BAL ANCE
COLOUR L EVEL
ENHANCE LEVEL
PEDEST AL LEVEL
AUTO BL AC K CT L
ATW
NORMAL
NORMAL
NORMAL
OF F
R
:
:
B
G
g
M
:
:
੬ Page 32
MODE SELECT
CAMERA I T L E ED I T ..
T
REVERSE MODE
HL I MODE
OF F
OF F
E
AL M . T I TLE
AL ARM COLOUR
S
I Z
DOUBLE
WH I TE
AUX TERMINAL
D. Z00M MAX
(B&W IN)
x2
੬ Page 34
੬ Page 39
੬ Page 30
MOT I ON DET EC T
B&W/COLOUR MODE
MODE
L EVEL
AREA ED I T ..
OFF
NORMAL
B&W
AUTO LEVEL
A U X
AL ARM
T
I
ME
1 0 s
DEMONSTRA T I ON ..
੬ Page 35
COMMUN I CAT I ON
S TYLE
MACH I NE
P TO P
– – –
I
D
੬ Page 38
੬ Page 42
੬ Page 42
CAMER A
0 1 2 3 4 5 6 7 8
ABC DE FG H I J K L MNO P
QRS T U VWXY Z
T
E
/
I
9
T L
-
:
.
,
MA I NT ENANC E
CCD SPOT
CCD SPOT . .
CANCEL
EXECUTE
a
q
b c d e
f
g
h
i
j
z
k
’
l
mn o p
r
s
t
u v w x y
ÄÖÜ ÂÊ Î ÔÛÇÑ
ä ë
ï
ì
ö ü â ê
ò ù ç ñ ß
î
ô û á é
í
ó ú
¡
¿
à
è
੬ Page 35
W I DE
T E L E
a y
T
i
t
l
e
D
i
s
l
F ACTORY SE TT I NGS
h e a t u p 3 0 m i n i n a d v a n c e
–
n e e d L e n s c a p t o
e
x
e
c
u
t
e
CANCEL
(
CLE AR W I THOUT
T
I T LE )
(
CLE AR AL L )
E-24
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
SYNC ADJUST Screen
This executes the setting regarding synchronization.
Item
Functions and set values
Initial value
Item
Functions and set values
Initial value
SHUTTER
/ExDR
This sets the electronic shutter as well as the ExDR (Extended
Dynamic Range).
NORMAL
V PHASE
This adjusts the vertical synchronization to those of other cameras
when a selector switch for the synchronizing system on the side
is at LL. (50Hz power region only.)
When it is not set to LL, “---” will appear, disabling change
the set value.
[Set value: –156 to 0 to 156]
0
The use of an electronic shutter function enables shooting with
proper brightness, as more brightness results in higher shutter
speed.
The ExDR function allows even the shooting of a subject having
different luminous flux density by composing a picture shot at 1/
100 sec. shutter speed with a picture shot by a high-speed
shutter.
NORMAL: This fixes the shutter speed to 1/50.
The ExDR does not function.
H PHASE
This adjusts the horizontal synchronization to those of other
cameras and systems when a selector switch for the
synchronizing system on the side is at INT/GL.
When external signals are not input, “---”will appear, disabling
change the set value.
0
MANUAL: This sets the shutter speed by the item SHUTTER
SPEED on the SHUTTER screen.
The ExDR does not function.
When SENSE UP is functioning, MANUAL cannot be
selected. (Not displayed on MENU)
[Set values: –16 to 0 to 16]
AUTO:
This automatically switches the shutter speed
according to brightness.
SC COARSE
Coarse adjustment of the SC phase in gen-lock operation.
The SC phase can be varied by up to 90° in each direction.
Adjust with reference to another camera (or system) and
together with the SC FINE adjustment.
0°
The ExDR does not function.
The item FAST LIMIT on the SHUTTER (ExDR) screen
sets a maximum shutter speed value.
M.ExDR: This is used when shooting a subject with difference
in a luminous flux density in the screen under a fixed
illumination condition, and so on. During ExDR mode,
the item M.ExDR.SPEED on the SHUTTER (ExDR)
screen sets the composing high shutter speed. It is
possible to set only when the items BLC and SENSE
UP are OFF. What’s more, the ExDR LEVEL sets the
signal level of the composing high-speed shutter.
A.ExDR: This is used when the subjects having different
luminous flux densities are continuously used night
and day in the situation where both indoor and outdoor
subjects are mixed in existence, and so forth. During
ExDR mode, the composing shutter speed
automatically varies according to the contrast of a
subject. This is set when shooting the subject with
changing brightness.
Adjust SC COARSE and SC FINE only after adjusting H
PHASE.
When it is not set to GL, “---” will appear, disabling change
the set value.
[Set values: 0°, 90°, 180°, 270°]
SC FINE
Fine adjustment of the SC phase in gen-lock operation.
When it is not set to GL, “---” will appear, disabling change
the set value.
128
[Set values: 0 to 255]
ALC SETTINGS Screen
This can be set only when the item BLC is OFF.
What’s more, the ExDR LEVEL sets the signal level
of the composing high-speed shutter.
This makes automatic adjustments according to brightness.
MEMO
• Do not set to A.ExDR when using a manual lens.
• When M.ExDR mode or A.ExDR mode is used, the border
between a bright part and a dark part can be coloured (cyan,
orange, etc.), but this is not a malfunction.
• When the SHUTTER/ExDR item is set to M.ExDR or
A.ExDR, a flicker can occur under a fluorescent lamp,
mercury lamp, etc. However, this occurs by principle of the
ExDR function, and therefore this is not a malfunction.
Item
Functions and set values
Initial value
Adjusts the brightness level of the video signal.
• To lower the brightness level ... Decrease the value
• To raise the brightness level .... Increase the value
[Set values: –5 to NORMAL to 5]
NORMAL
IRIS LEVEL
Sets the exposure detection as a ratio of the average value
and the peak value.
8 : 2
AVERAGE:
PEAK
* When the SHUTTER (ExDR) item is set to NORMAL, the following items
(SHUTTER SPEED, FAST LIMIT, ExDR LEVEL, and M.ExDR SPEED) cannot
be changed.
• AVERAGE value large: Increase the AVERAGE value
when portions other than the highlighted areas of the
screen are dark and look corrupted. (Ex. 10:0)
• PEAK value large: Increase the PEAK value when
halation occurs in the highlighted areas of the screen.
(Ex. 5:5)
SHUTTER
SPEED
This sets a shutter speed when MANUAL is set.
The AUTO, M. ExDR, A. ExDR set value is displayed as
“- - -” and cannot be changed
[Set values: 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, and 1/
10000]
1/120
[Set values: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5]
E-26
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
ALC SETTINGS Screen (Continued)
Item
Functions and set values
Initial value
Item
Functions and set values
Initial value
FAST LIMIT
This sets the fastest value of a shutter speed when AUTO is set.
1/100000
MOTION
PRIORITY
This item sets the order in which the AGC and slow shutter
speed decrease function when the object brightness
The MANUAL, M. ExDR, A. ExDR set value is displayed as “- - -” and
cannot be changed. The higher the shutter speed becomes, the more
smear phenomenon is emphasized, which is peculiar to the CCD.
[Set values: 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, 1/40000, 1/100000]
becomes low.
If B&W item of the B&W/COLOUR mode is set to AUTO, and the
AGC MODE item or the SENSE UP item is set to OFF, “- - -” will
appear, disabling any setting.
ExDR
LEVEL
This sets the signal level of the composing high-speed shutter during
ExDR mode. This is set according to the brightness of a subject.
When using M.ExDR, be sure to set M.ExDR SPEED in advance.
When the SHUTTER/ExDR item is set to MANUAL or AUTO,
“- - -” appears, disabling setting.
NORMAL
MOTION: Priority is given to motion.
This is suitable to a subject with quick motion,
since the AGC (automatic gain control) functions
with priority when the subject becomes dark.
PICTURE: Priority is given to image.
To give priority to the low-brightness parts of the subject…
increase the value
To give priority to the high-brightness parts of the subject…
decrease the value
When the subject becomes dark, SENSE UP
(sensitivity goes up) functions with priority,
offering suitability that gives priority to image.
[Set values: –5 to NORMAL to 5]
MEMO
• In the case of a subject with a large difference in the luminous flux
density, sometimes images do not change even if ExDR LEVEL is
varied. However, this occurrence is a peculiarity of the unit and is
not a malfunction.
Sets the backlight compensation function. Set when a
bright light source, etc. is placed in the same direction as
the subject.
BLC
OFF
M.ExDR
SPEED
This sets the composing high shutter speed when ExDR is set to M.ExDR.
Set the shutter speed in order that a subject with a high luminous flux
density (outdoor, etc.) may come out most clearly. This is displayed as “-
- -” during MANUAL, AUTO or A. ExDR and cannot be set.
1/4000
20dB
If the item SHUTTER/ExDR is set to the M.ExDR or the
A.ExDR, “- - -” will appear, and the BLC does not function.
[Set values: 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000]
OFF:The backlight compensation function does not work.
AGC MODE
This sets a maximum gain of the AGC (Automatic Gain Control).
OFF:
10dB:
20dB:
When the AGC function is not used.
When luminous energy is insufficient.
When luminous energy is extremely insufficient.
AREA 1 to AREA 4:When the SET button is pressed, the
fixed light metering areas are displayed. Select one of
the four types.(Indicated positions on the screen are rough
guides. Execute required settings after checking and
confirming the functions on actual images.)
SUPER: When brightness is insufficient even when it is set to 20dB.
• If the gain is increased, the screen gets rough in a dark place.
• If it is set to SUPER, it can sometimes consume operation time to
cope with a drastic level change.
•
When the item “B&W” is set to “AUTO”, [SUPER] is displayed when
the item “AGC MODE” is set to “SUPER”, and [20dB] is displayed for
other settings. Increase the gain up to the value displayed.
Light
Light
Light
Light
Light
metering metering metering metering metering
area
area
area
area
area
LOLUX MODE
SENSE UP
Used when brightness is low even when setting the AGC MODE.
(Functions regardless of the AGC MODE setting.)
OFF: LOLUX MODE is off
OFF
OFF
ON: LOLUX MODE is on (+ 6dB)
OFF
AREA 1
AREA 2
AREA 3
AREA 4
This item makes up a sensitivity should be heightened automatical-
ly when a subject becomes dark.
In case of the X32 AUTO, the sensitivity is automatically heightened
up to 32 times continuously as compared with standard.
As the sensitivity becomes higher, the shutter speed becomes lower,
resulting in unnatural motion.
* The indicated position on the screen should be used as
a rough guide.
EDIT 1 to EDIT 2: When the SET button is pressed, the
user light metering areas are displayed. Select one of the
two types.
If SHUTTER/ExDR is set to MANUAL or the M.ExDR,
“- - -” will appear, disabling the SENSE UP function.
[Set values: OFF, X2 AUTO, X4 AUTO, X8 AUTO, X16 AUTO, X32
AUTO]
੬ “BLC EDITTING Screen” on page 36.
MEMO
• When the magnification of SENSE UP is enhanced, the screen
can become coarse or whitish, or whitish flaws can emerge
sometimes, but this is not abnormal.
• When the item SENSE UP is set other than to OFF, a flicker can
occur under a fluorescent lamp, mercury lamp, etc. However, this
occurs by principle of SENSE UP, and therefore this is not a
malfunction.
E-28
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
ALC SETTINGS Screen (Continued)
VIDEO ADJUST Screen
Adjustments are made on video signals.
Item
Functions and set values
Initial value
Item
WHITE
Functions and set values
Initial value
This function sets the colour modes to colour or B&W.
When switching the mode between “colour’’ and “B&W”
is carried out, the focus may be dislocated. In such a case
adjust the focus again.
B&W COLOUR
MODE ..
Selects the white balance adjustment function.The white
balance can be adjusted manually or automatically for
light within the colour temperature range of 2500K to
8000K.
ATW
BALANCE
Switches the mode from colour to B&W and visa-versa.
OFF : Turns the B&W mode switching function off.
AUX
B&W
• ATW:
Auto-Tracking White Balance mode.
This automatically adjusts the white balance.
Auto White Balance Controll mode.When the
SET button is pressed, the adjustment
screen appears.
ON
: Sets the camera permanently to B&W mode.
AUTO : The camera automatically switches to Colour
mode when the object is bright and B&W mode
when it is dark. (੬ Page 40)
• AWC:
AUX : B&W/COLOUR switching is carried out
according to the signal input from the AUX
terminal. (੬ Page 41)
(੬ See page 37.)
MEMO
The “- - -” will appear during operation in the black-and-
white mode and any setting cannot be changed.
MEMO
• If AUTO is selected as the B&W item, the B&W/COLOUR
setting can be switched as appropriate according to the
brightness of the object, but illumination and screen
conditions may make this impossible. Moreover, when
you use infrared illumination, if the subject excessively
reflects, a B/W screen can switch to a colour screen.To
make absolutely certain of B&W/COLOUR switching,
set to AUX and input the control signal to the AUX
terminal.
• If AUX is selected as the B&W item, the AUXTERMINAL
item is automatically set to B&W IN. If this changes to
anything other than AUX, the AUX TERMINAL item
reverts to the value set before the change was made.
(੬ Page 33.)
To adjust the colour level of the video signal.
• To make colours lighter … Decrease the value
• To make colours darker … Increase the value
[Set values: –5 to NORMAL to 5]
COLOUR
LEVEL
NORMAL
MEMO
The “- - -” will appear during operation in the black-and-
white mode and any setting cannot be changed.
To adjust the contour enhancing level of the video signal.
• To make the picture quality harder … Increase the value
• To make the picture quality softer … Decrease the value
[Set values: –5 to NORMAL to 5]
ENHANCE
LEVEL
NORMAL
NORMAL
OFF
To adjust the pedestal level of the video signal.
• To brighten picture … Increase the value
• To darken picture … Decrease the value
[Set values: –5 to NORMAL to 5]
PEDESTAL
LEVEL
AUTO
LEVEL
When the “B&W” function is set to “AUTO”, this function
sets the signal level of the object at which the camera will
automatically switch to B&W mode.
LOW : Switches to B&W mode when the signal level of
the object indicates low illumination.
NORMAL: Switches to B&W mode when the signal level of
the object indicates medium illumination.
HIGH : Switches to B&W mode when the signal level of
the object indicates high illumination.
NORMAL
This is set when it is difficult to view a dark part of the
image even if gain is boosted by the AGC (automatic gain
control).
ON: When a black level of the image signal is low, a
pedestal level that becomes the standard of black
is automatically elevated, making it easier to view a
dark part.
AUTO
BLACK
CTL
MEMO
OFF: AUTO BLACK does not function.
When the item “B&W” is set to other than AUTO, “- - -” is
displayed and the settings to the item “LEVEL” cannot be
varied.
MEMO
• When PEDESTAL LEVEL is set to 5, no function can
take place even if AUTO BLACK CTL is ON.
• When AGC MODE is set to OFF, no function can take
place even if AUTO BLACK CTL is ON.
E-30
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
MODE SELECT Screen
Titles, image reversion, etc., are set.
Item
Functions and set values
Initial value
Item
Functions and set values
Initial value
Bring up the CAMERA TITLE, EDIT screen.
(੬ Page 38)
–
For setting the signal input or output of the AUX terminal.
(B&W IN)
CAMERA
TITLE EDIT
AUX
TERMINAL
MOTION: A signal is output if there is a change in the
area set on the MOTION DETECT screen.
B&W OUT: A signal is output when the camera switches
to B&W or Colour mode.
Settings are executed for image reversion.
OFF: Image does not reverse.
U-D: Up and down of the image are reversed.
R-L: Left and right of the image are reversed.
ALL: Up and down and left and right of the image are
reversed.
REVERSE
MODE
OFF
B&W IN:
Set to this position when inputting the B&W/
Colour switching control signal to the AUX
terminal. (੬ Page 11, 30.)
The highlighted part of the image is made black to make
the surroundings of the highlighted part better visible. Set
to HIGH when there are many highlighted parts.
[Set values: OFF, LOW, MIDDLE, HIGH]
HLI MODE
OFF
MEMO
• In setting B&W OUT, if you use an infrared illuminator in
link motion, hunting can occur. To prevent this, we
recommend that you link in motion this unit and the
infrared illuminator, etc., by control signals after setting
to B&W IN.
Set the size of the characters displayed in the case of
alarms.
ALM.TITLE
SIZE
DOUBLE
• If the B&W item is set to AUX, the AUX TERMINAL item
changes to [B&W IN] and can not be changed.
A L A R M
AL ARM
x2
This function sets the maximum zoom ratio of the
electronic zooming.
[Set values: x1, x2, x4, x6, x8, x10]
D.ZOOM
MAX
MEMO
NORMAL
DOUBLE
• The electronic zoom function can only be used by the
communication command of exclusive controllers (RM-
P2580, etc.).
• Note Picture quality deteriorates under electronic
zooming as it is accompanied by digital image
processing.
• When the electronic zoom magnification ratio is
increased, there may be blurring in the upper center left
of the screen. This is a characteristic of the main unit
and is not a malfunction.
This sets the colour of an alarm title.
[Set values: WHITE, GREEN, CYAN, YELLOW]
ALARM
COLOUR
WHITE
MEMO
In the ALARM mode, the colour of camera title appears
in the ALARM COLOUR set.
E-32
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
COMMUNICATION Screen
MOTION DETECT Screen
Settings are made for the control signal-connecting terminals on the back.
If the setting is changed, be absolutely sure to switch on the power again.
Settings are executed about the motion detecting function that emits alarm signals when
there exists any motion in the image. Alarm signals are output from the auxiliary terminals on
the back.
Item
STYLE
Functions and set values
Initial value
Item
MODE
Functions and set values
Initial value
P TO P
This sets a communication system according to the system
used.
This sets ON/OFF of motion detecting function.
OFF
P TO P (Point to point)
OFF:
ON:
Motion detecting function does not work.
Motion detecting function works.
This is set when a remote control unit controls a camera.
M.DROP (Multi-drop)
This is set when a remote control unit controls a plural
number of cameras.
LEVEL
This sets the level that detects motion.
If the item MODE is set to OFF, “- - -” will appear, and
settings cannot be changed.
NORMAL
MACHINE ID
This is set when the STYLE item is set to M.DROP. This
is the number that identifies individual cameras in a group.
No proper function can be realized if an ID number is
repeated within a system.
– – –
To function with large signal level change…decrease the
value
To function with small signal level change…increase the
value
A combined use with the RM-P2580 necessitates the
setting together with the video input number of the RM-
P2580.
If the item STYLE is set to P TO P, “- - -” will appear, and
settings cannot be changed.
[Set values: –5 to NORMAL to 5]
This sets the range in which the motion detecting function
works.
AREA EDIT
–
(੬ Page 39)
MAINTENANCE Screen
ALARM TIME
This sets the output time of the alarm signal output of
AUX terminal as well as “ALARM” display on the screen
when motion is detected.
10s
White spot compensation is performed.
Item
Functions and set values
Initial value
–
If the item MODE is set to OFF, “- - -” will appear, and
settings cannot be changed.
[Set values: OFF, 5s, 6s, 7s, 8s, 9s, 10s, 15s, 20s, 30s,
1min]
The white spots on the screen, which are characteristic
for CCDs can be reduced.
੬ Page 42 “White Spot Compensation”
CCD SPOT
MEMO
FACTORY SETTINGS Screen
Set values are returned to initial values.
Even when the ALARM TIME item is set to OFF, an alarm
signal is output from the AUX terminal for about 500ms,
and “ALARM” is not displayed on the screen.
Item
Functions and set values
Initial value
–
This is used when checking and confirming the set motion
detecting function. The detection area is shown in gray.
(੬ Page 39)
DEMONSTRATION
–
The values set on the menu are returned to initial values.
FACTORY
SETTINGS
CANCEL
: No return to the initial value.
: Returns set values except titles to the
initial value.
CLEAR
(WITHOUT TITLE)
CLEAR (ALL) : Returns all set values including titles
to the initial value.
Select respective set value and press the SET button.
Then, “DATA CLEARED” will appear for about 3 seconds.
Be sure not to switch off the power while the display is still
on.
MEMO
However, when FACTORY SETTINGS by means of
transmitted commands, the contents of the
COMMUNICATION menu do not return to the factory
settings.
E-34
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
BLC EDITTING Screen
Manual Adjustment of White Balance
It is possible to set freely the light metering area for backlight compensation. The 2 screens
of EDIT1 and EDIT2 can be set.
When automatic adjustment of the white balance results in a “reddish screen”, etc., adjust the
white balance manually.
MENU button
SET button
ALC SET T I NGS
I R I S LE VEL
NORMAL
8 :
NORMAL
2 0 dB
OFF
AVERAGE : PEAK
SHUTT ER / E x DR
AGC MODE
LOL UX MODE
SENSE UP
2
MENU button SET button
1. Set the WHITE BALANCE item on the
VIDEO ADJUST screen to AWC and
press the SET button.
SET
OFF
CAMERA
SETUP
PR I OR I T Y
BLC
MOT I ON
EDIT 1
AWC
* The WHITE BALANCE adjustment
screen appears on the monitor.
* Select AWC SET, and press the SET
button. AWC (white balance adjust-
ment) is performed, and the WHITE
BALANCE CONTROL screen appears
on the monitor.
MENU
B&W/COLOUR MODE
SET
CAMERA
SETUP
AWC
MENU
EDIT 1 screen
1. Set the item BLC on the ALC
Light metering
area
SETTING screen to EDIT1.
2. Select the hue to be adjusted. (R/B or
Mg/G)
2. Press the SET button.
Press the
or
button.
The EDIT1 screen is brought up.
3. Adjust the hue.
3. Set the upper side and left side
of the metering area using the
button.
SET button
V I DEO ADJ UST
Press the or
button.
WH I TE BAL ANCE
COLOUR L EVEL
ENHANCE LEVEL
AWC
..
NORMAL
NORMAL
NORMAL
OF F
* The “ ı ” indicator moves in accordance
with the setting. When a setting is
changed, the “+” mark appears at the
original position.
PEDEST AL LEVEL
AUTO BL AC K CT L
The sides having
be changed.
marks can
4. Press the SET button.
4. Concluding manual white balance ad-
justment.
The changeable sides of the metering
area move to the right side and base
side.
VIDEO ADJUST screen
Pushing the MENU button returns the
screen to VIDEO ADJUST.
EDIT 2 screen
5. Set the base and right side of the
metering area using the
button.
WH I T E BALANCE CONTROL
MEMO
AWC SE T
..
R
M
:
:
:
:
B
G
If the mode is changed from colour to black-
and-white during the colour phase adjustment
on theWHITE BALANCE CONTROL screen,
the VIDEO ADJUST screen will be brought
back. At this time, any adjusted value will not
be saved.
Light metering
area
g
If the SET button is pressed once more,
the two changeable sides of the meter-
ing area return to the top and left sides.
(The EDIT2 screen can also be set
likewise)
SET button
WHITE BALANCE
CONTROL screen
6. Upon completion of setting,
press the MENU button.
The screen returns to ALC SETTING
SCREEN.
* To use the set metering area, set the item
BLC to EDIT1 or EDIT2.
* The indicated position on the screen
should be used as a rough guide.
E-36
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
CAMERA TITLE Setting
Setting the MOTION DETECT Function
Up to 24 characters can be selected as camera text for each camera. The set characters are
displayed at the bottom of the screen.
It is possible to set freely the area where MOTION DETECTING functions.
MENU button SET button
1. Select the item CAMERA TITLE
1. Select the item AREA EDIT on
MOT I ON DET EC T
MODE
on the MODE SELECT screen,
and push the SET button.
the MOTION DETECT screen.
OFF
NORMAL
L EVEL
AREA ED I
T
..
AL ARM T I ME
DEMONSTRA T I ON ..
1 0 s
Then, the CAMERA TITLE screen is
brought up.
2. Press the SET button.
SET
CAMERA
SETUP
The setting screen is brought up.
AWC
MENU
2. Select the first character from the
character area using
buttons.
3. Select the area not subject to
detection using the
MOTION DETECT screen
flash
button.
The selected character is displayed
flashing on and off.
The area flashing ON and OFF in black
and white moves.
3. Push the SET button.
The first character gets fixed and the
blinking title input area moves to the
second character.
4. Press the SET button.
The area not subject to detection is set,
and it turns gray (lights up).
To cancel the set area, press the SET
button again.
MODE SELECT
CAMERA I T L E ED I T ..
T
REVERSE MODE
AL M . T I TLE S I Z
AL ARM COLOUR
OF F
DOUBLE
WH I TE
E
AUX TERMINAL
D. ZOOM MAX
(B&W IN)
x2
4. Repeat the above items 2 to 3.
It is possible to use up to 24 characters
to input the title.
5. Repeat items 3 and 4 above.
MODE SELECT screen
6. Upon completion of setting,
press the MENU button.
The screen returns to the MOTION
DETECT menu.
Setting screen
5. Push the MENU button.
The screen returns to MODE SELECT.
lights gray
flash
Space
Character area
MEMO
CAMER A
0 1 2 3 4 5 6 7 8 9
ABC DE FG H I J K L MNO P
QRS T U VWXY Z
T
E
/
I
T L
• Indicated positions on the screen are rough
guides.
Be sure to check and conform the positions
on the actual screen.
-
:
.
,
a b c d e f g h
u v w x y z
ÄÖÜ ÂÊ Î ÔÛÇÑ
i
j
k l mn o p
’
q
r
s
t
ä ë
à è
ï
ì
ö ü â ê î ô û á é
ò ù ç ñ ß
í
ó ú
▲
¡
¿
* It is possible to check and confirm the set
areas on the DEMONSTRATION screen.
The detection area is shown in gray.
• The MOTION DETECT function does not
work for about 5 seconds after exiting
MENU.
W I DE
T E L E
CAMERA TITLE screen
Title input area
Displayed when making
communication settings only
The motion detector is not a feature to prevent theft, fire, etc. Even if an accident should occur
resulting in damage, we do not accept any liability.
E-38
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Output of Black-White/Colour switching signal
Control by Black-White/Colour switching signal from the outside
It is possible to output black-white/colour switching signal from the AUX terminal on the back
of this unit. Perform the following settings.
Carry out the following setting when you link in motion the black-white/colour switching of this
unit and infrared illumination, etc., using the switching signal from the outside control device.
Infrared illumination, etc.
Switching
signal
Ⅲ Set the B&W Item to AUTO.
+
1
-
2
B&W: Make signal
COLOUR: Break
signal
MENU button SET button
1. Select the B&W/COLOUR MODE item
on the ALC SETTING screen.
TX
+
TX
-
RX
+
RX
-
AUX GND
A
B
C
D
2. Press the SET button.
Y/C OUT
Sensor or switch
Outside control device
The B&W/COLOUR MODE screen
SET
SYNC IN
POWER
VIDEO OUT
CAMERA
SEE INST-
appears.
RUCTION
MANUAL
SETUP
AWC
MENU
3. Press either the
button and select the B&W item.
button or the
button or the
It is requested that you consult our JVC dealer about connecting
devices, etc.
4. Press either the
button and set to “AUTO”.
Ⅲ Set the B&W item to AUX.
5. Upon completion of setting, press the
MENU button SET button
1. Select B&W/COLOUR MODE on
MENU button twice.
the ALC SETTING screen.
Then, the MAIN MENU screen is
brought back.
B&W/COLOUR MODE
2. Press the SET button.
SET
Ⅲ Set the AUX TERMINAL Item to
B&W OUT.
CAMERA
SETUP
B&W
AUTO LEVEL
AUTO
NORMAL
• The B&W/COLOUR MODE screen
appears.
AWC
MENU
1. Select MODE SELECT on the MAIN
MENU screen.
3. Press either the button or the
button and select the B&W
item.
2. Press the SET button.
The MODE SELECT screen appears.
3. Press either the
button or the
button and select the AUX TERMINAL
item.
ALC SET T I NGS
4. Press either the button or the
I R I S LE VEL
AVERAGE : PEAK
SHUTT ER / E x DR
AGC MODE
LOL UX MODE
SENSE UP
NORMAL
8 :
NORMAL
button and set to “AUX”.
2
MODE SELECT
CAMERA I T L E ED I T
4. Press either the
button or the
Then, the AUX TERMINAL item on the
MODE SELECT screen is automatically
set to (B&W IN). Refer to ੬ Page 33.
2 0 dB
OFF
OFF
T
button and set to ”B&W OUT”.
..
REVERSE MODE
HLI MODE
OF F
OFF
5. Upon completion of setting, press the
PR I OR I T Y
MOTION
E
AL M . T I TLE S I Z
AL ARM COLOUR
DOUBLE
WH I TE
BLC
ED I T
1
MENU button twice.
B&W/COLOUR MODE ..
AUX TERMINAL
D. ZOOM MAX
(B&W IN)
x2
• Then, the normal screen is brought
back.
5. Upon completion of setting,
press the MENU button.
• Then, the ALC SETTING screen is
brought back.
MEMO
• When you use infrared illumination, if the
subject excessively reflects, a B/W screen
can switch to a colour screen.
To perform switching with higher accuracy,
we recommend that you use it by the setting
mentioned in [Control by Black-White/
Colour Switching Signal From the Outside],
referring to Page 41.
B&W/COLOUR MODE
B&W
CAUTION:
When you use near infrared ray illumi-
nations, use a lens that is compatible
with the near infrared ray illuminations.
Any lens other than the compatible one
can result in out-of-focus due to such
characteristics.
CAUTION:
AUTO
AUTO LEVEL
NORMAL
When you use near infrared ray illumi-
nations, use a lens that is compatible
with the near infrared ray illuminations.
Any lens other than the compatible one
can result in out-of-focus due to such
characteristics.
E-40
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
Specifications
White spot compensation
Image pickup device:
Synchronization method :
Scanning frequency:
Resolution:
VIDEO OUT:
Y/C OUT:
1/3 type IT CCD, 752 (H) × 582 (V)
Internal, Line lock, Full Genlock
(H) 15.625 kHz, (V) 50 Hz
480 TV lines (H)
Composite video signal 1 V (p-p), 75 1 (BNC)
CCDs have the general characteristic that white spots appear on the screen when the CCD is
operated at high temperatures or when they are used with a slow shutter speed.
This unit has a built-in white spot compensation function to reduce these white spots.
(The number and the size of the white spots changes according to the use temperature, the
shutter speed, etc. Furthermore, there is a limit on the number of white spots that can be
compensated.)
Y: 1.0 V (p–p), 75 1
C: 0.3 V (p–p), 75 1
Video S/N ratio:
Minimum required illumination:
50 dB (AGC OFF)
0.9 lx (50 %, F1.2, AGC 20 dB)
Operation method
1. Attach a lens cap or similar.
MA I NTENANC E
0.45 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE)
0.45 lx (25 %, F1.2, AGC 20 dB)
0.23 lx (25 %, F1.2, AGC 20 dB, LOLUX MODE)
0.03 lx (50 %, F1.2, AGC 20 dB, B&W MODE)
0.015 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE, B&W MODE)
0.015 lx (25 %, F1.2, AGC 20 dB, B&W MODE)
0.03 lx (50 %, F1.2, AGC 20 dB, SENSE UP × 32)
0.014 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE, SENSE UP × 32)
RS-422A or RS-485 (switchable)
9600 bit/s
• Prevent entry of light to the CCD.
CCD SPOT . .
• Switch on the camera power supply
and wait for at least 30 minutes.
2. Display the MAINTENANCE
screen.
• Confirm that the cursor (>) is at the item
CCD SPOT.
Communication:
Lens mount:
CCD SPOT
3. Press the SET button.
C/CS mount
—
CANCEL
EXECUTE
• The CCD SPOT screen will be dis-
Power supply and power consumption: TK-C1430E AC 24 V ` 50 Hz/60 Hz, DC 12 V --- 530 mA
played.
TK-C1431EG AC 220 V – AC 240 V `, 50 Hz/60 Hz, 75 mA
Ambient temperature:
Mass:
–10 °C to 50 °C (operation)
0 °C to 40 °C (recommended)
TK-C1430E 620 ˝
• If you do not want to perform white spot
compensation, move the cursor (>) to
CANCEL and press the SET button.
h e a t u p 3 0 m i n i n a d v a n c e
TK-C1431EG 840 ˝
–
n e e d L e n s c a p t o e x e c u t e
Accessory:
Instructions .................... 2 Ferrite core ..................... 1
4P plug .......................... 1
4. Move the cursor (>) to EXECUTE.
DIMENSIONS (Unit: mm)
5. Press the SET button.
• White spot compensation will operate.
(“SPOT SCAN OPERATION” is dis-
played during operation.)
149
138
70
U1-32
39
2400
6. Confirm the display.
• When white spot compensation has
been performed correctly, “SPOT
SCAN OK” is displayed for about 5
seconds, and then return is made to
the CCD SPOT screen.
(TK-C1431EG)
42
71
1/4 – 20UNC
41
SPOT SCAN OK
• When “SPOT SCAN ERROR: HIGH
LIGHT” is displayed, check that no light
enters into the CCD.
7. Press the MENU button.
• Return to the MENU screen will be
made.
Design and specifications are subject to change without notice.
E-42
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
|