JVC CD Player KS FX480R User Manual

CASSETTE RECEIVER

CASSETTEN-RECEIVER

RADIOCASSETTE

RADIO/CASSETTESPELER

KS-FX43R/KS-FX483R/KS-FX480R

KS-F383R/KS-F380R

KS-FX43R/KS-FX483R/KS-FX480R

CD CHANGER CONTROL

TP/PTY

SEL

SSM

CD-

DISP

MO/RND

SCM

KS-F383R/KS-F380R

LOUD

SEL

SSM

DISP

PTY

SCM

For installation and connections, refer to the separate manual.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

Pour l’installation et les raccordements, se référer au manuel séparé.

Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende

handleiding.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

GET0110-001A

[E/EX]

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION OF THE BUTTONS

Control panel—KS-FX43R/KS-FX483R/KS-FX480R

Display window

CD CHANGER CONTROL

TP/PTY

DISP

SEL

SSM

CD-

MO/RND

SCM

(standby/on/attenuator) button

Display window

u FM band indicators

(FM1, FM2, FM3)

i AM band indicator

o RND (random) indicator

; CD-CH (CD changer) indicator

a LOUD (loudness) indicator

s Main display

d Sound mode indicators

BEAT, SOFT, POP

f Tuner reception indicators

MO (monaural), ST (stereo)

g RDS indicators

2 TP/PTY (traffic programme/programme type)

button

3 +/– buttons

4 0 (eject) button

5 Cassette compartment

6 1/¡ (PROG: program) buttons

7 CD-CH (CD changer) button

8 AM button

9 FM button

p DISP (display) button

q SEL (select) button

w Number buttons

e MO/RND (monaural/random) button

r SCM (sound control memory) button

TP, PTY, AF, REG

(control panel release) button

¢ / 4 buttons

• Also functions as SSM buttons when pressed

together.

Download from Www.Somanuals.com. All Manuals Search And Download.

Control panel—KS-F383R/KS-F380R

Display window

DETACHABLE CONTROL PANEL

LOUD

SEL

SSM

PTY

DISP

SCM

(standby/on/attenuator) button

Display window

u FM band indicators

(FM1, FM2, FM3)

i AM band indicator

o LOUD (loudness) indicator

; Main display

a Sound mode indicators

BEAT, SOFT, POP

s Tuner reception indicators

MO (monaural), ST (stereo)

d RDS indicators

2 LOUD (loudness) button

3 +/– buttons

4 0 (eject) button

5 Cassette compartment

6 1/¡ (PROG: program) buttons

7 TP/PTY (traffic programme/programme type)

button

8 AM button

9 FM button

p DISP (display) button

q SEL (select) button

w Number buttons

TP, PTY, AF, REG

e MO (monaural) button

r SCM (sound control memory) button

(control panel release) button

buttons

• Also functions as SSM buttons when pressed

together.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

KS-FX43R/KS-FX483R/KS-FX480R

KS-F383R/KS-F380R

3 Adjust the volume.

Turning on the power

To increase the volume

1 Turn on the power.

To decrease the volume

Notes on One-Touch Operation:

• When you select a source in step 2 below, the

power automatically comes on. You do not

have to press this button to turn on the power.

• If the cassette is already in the cassette

compartment, tape play starts automatically.

However, it is not recommended to leave the

cassette in the compartment when turning off

the power or ignition key. It may damage the

tape head and the cassette.

Volume level appears.

4 Adjust the sound as you want.

(See pages 19 – 20.)

To drop the volume in a moment

2 Select the source.

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

CD-

To turn off the power

Press and hold

second.

“SEE YOU” appears, then the unit turns off.

for more than one

KS-FX43R/

KS-FX483R/KS-FX480R

KS-F383R/KS-F380R

To operate the tuner (FM or AM),

see pages 7 – 17.

To operate the tape,

see page 18.

Only for KS-FX43R

KS-FX43R is equipped with the steering

wheel remote control function.

If your car is equipped with the steering wheel

remote controller, you can operate this

receiver using the controller.

Only for KS-FX43R/KS-FX483R/KS-FX480R:

To operate the CD changer,

see pages 24 – 25.

• See the Installation/Connection Manual

(separate volume) for connection to utilize

this function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the clock

4 Set the clock system.

1 Select “24H/12H.”

You can also set the clock system to either 24

hours or 12 hours.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 22.)

2 Select “24H” or “12H.”

SEL

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

5 Finish the setting.

SEL

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

To check the current clock time or change the

display mode

2 Adjust the hour.

Press DISP (display) repeatedly.

DISP

Each time you press the button, the display

mode and clock time alternates on the display.

Notes:

3 Set the minute.

• For the indication change during RDS operation,

1 Select “CLOCK M” (minute).

see page 16.

• During CD changer operation (for KS-FX43R/

KS-FX483R/KS-FX480R), see page 24.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

2 Adjust the minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO OPERATIONS

For

KS-FX43R

KS-FX483R

KS-FX480R

For

KS-F383R

KS-F380R

Listening to the radio

2 Start searching a station.

To search stations of higher frequencies

You can use either automatic searching or manual

searching to tune in to a particular station.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

Note:

When a cassette is in the cassette compartment, you

cannot select the tuner. Be sure to eject the cassette

from the cassette compartment to listen to the radio.

Searching a station automatically:

Auto search

To search stations of lower frequencies

When a station is received, searching stops.

1 Select the band (FM1 – 3, AM).

To stop searching before a station is received,

press the same button you have pressed for

searching.

FM1

FM2

FM3

Selected band appears.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

Download from Www.Somanuals.com. All Manuals Search And Download.

When an FM stereo broadcast is hard to

receive:

Searching a station manually:

Manual search

Press MO/RND (for KS-FX43R/KS-FX483R/

KS-FX480R) or MO (for KS-F383R/KS-F380R)

while listening to an FM stereo broadcast.

• Each time you press the button, the MO

indicator lights up and goes off alternately.

1 Select the band (FM1 – 3, AM).

FM1

FM2

FM3

MO/RND

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

MO (monaural) indicator

2 Press and hold

KS-FX43R/KS-FX483R/KS-FX480R)

or (for KS-F383R/KS-F380R)

¢ / 4

(for

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

until “M” (manual) starts flashing on

the display.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

3 Tune in to a station you want while

“M” is flashing.

To tune in to stations of higher frequencies

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

To tune in to stations of lower frequencies

• If you release your finger from the button,

the manual mode will automatically turn

off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for

FM and 9 kHz intervals for AM—MW/LW)

until you release the button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

Ex.: Storing FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

• Manual preset of both FM and AM stations

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

FM1

FM2

FM3

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

FM1

FM2

FM3

2 Tune in to a station (in this example,

of 88.3 MHz).

2 Press and hold both buttons for

To tune in to stations of higher frequencies

more than 2 seconds.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

SSM

To tune in to stations of lower frequencies

“- -SSM- -” appears, then disappears

when automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number buttons—

No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Press and hold the number button

(in this example, 1) for more than 2

seconds.

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 9 and 10.

1 Select the band (FM1 – 3, AM).

FM1

FM2

FM3

“P1” flashes for a few seconds.

4 Repeat the above procedure to store

other stations into other preset

numbers.

2 Select the number (1 – 6) for the

preset station you want.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

Download from Www.Somanuals.com. All Manuals Search And Download.

RDS OPERATIONS

To use Network-Tracking Reception

What you can do with RDS

You can select the different modes of network-

tracking reception to continue listening to the

same programme in its finest reception.

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals. For example, the stations

send their station names, as well as information

about what type of programme they broadcast,

such as sports or music, etc.

Another advantage of RDS function is called

“Enhanced Other Networks.” By using the

Enhanced Other Networks data sent from a

station, you can tune in to a different station of a

different network broadcasting your favorite

programme or traffic announcement while

listening to another programme or to another

source such as tape.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

activated with Regionalization set to

“off.”

With this setting, the unit switches to

another station within the same

network when the receiving signals

from the current station become

weak. (In this mode, the programme

may differ from the one currently

received.)

The AF indicator lights up but the

REG indicator does not.

By receiving the RDS data, this unit can do the

following:

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search

• Programme search

• AF REG: Network-Tracking Reception is

activated with Regionalization set to

“on.”

With this setting, the unit switches to

another station, within the same

network, broadcasting the same

programme when the receiving

signals from the current station

become weak.

• And some other functions

Tracing the same programme

automatically (Network-Tracking

Reception)

Both the AF indicator and the REG

indicator light up.

• OFF:

Network-Tracking Reception is

deactivated.

Neither the AF indicator nor the REG

indicator lights up.

When driving in an area where FM reception is

not good, the tuner built in this unit automatically

tunes in to another RDS station, broadcasting

the same programme with stronger signals. So,

you can continue to listen to the same

programme in its finest reception, no matter

where you drive. (See the illustration on page

17.)

Two types of the RDS data are used to make

Network-Tracking Reception work correctly—PI

(Programme Identification) and AF (Alternative

Frequency).

REG indicator

AF indicator

Without receiving these data correctly from the

RDS station you are listening to, Network-

Tracking Reception will not operate.

CONTINUED ON THE NEXT PAGE

Download from Www.Somanuals.com. All Manuals Search And Download.

Using TA Standby Reception

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 22.)

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

the current source—another FM station, tape, or

other connected components (for KS-FX43R/

KS-FX483R/KS-FX480R).

SEL

• TA Standby Reception will not work if you are

listening to an AM station.

2 Select “AF-REG” (alternative

frequency/regionalization reception)

if not shown on the display.

Press TP/PTY to activate TA Standby Reception.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

TP/PTY

PTY

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

7 When the current source is FM, the TP

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

3 Select the desired mode—“AF,”

“AF REG,” or “OFF.”

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically tunes in to

the station. The volume changes to the

preset TA volume level (see page 16) and the

traffic announcement can be heard.

• If the TP indicator flashes, TA Standby

Reception is not yet activated since the

station being received does not provide the

signals used for TA Standby Reception.

To activate TA Standby Reception, you need

to tune in to another station providing these

signals.

4 Finish the setting.

SEL

Press

¢ / 4

(for KS-FX43R/

(for

KS-FX483R/KS-FX480R) or

KS-F383R/KS-F380R) to search for such a

station.

When a station providing these signals is

tuned in, the TP indicator stops flashing and

remains lit. Now TA Standby Reception is

activated.

7 When the current source is other than FM,

the TP indicator lights up.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically changes the

source and tunes in to the station.

To deactivate the TA Standby Reception,

press TP/PTY again.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 When the current source is FM, the PTY

indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

Using PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) from the current source—

another FM station, tape, or other connected

components (for KS-FX43R/KS-FX483R/

KS-FX480R).

If a station starts broadcasting the selected

PTY programme, this unit automatically

tunes in to the station.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated since the

station being received does not provide the

signals used for PTY Standby Reception.

To activate PTY Standby Reception, you

need to tune in to another station providing

these signals.

• PTY Standby Reception will not work if you are

listening to an AM station.

You can select your favorite programme type for

PTY Standby Reception.

When shipped from the factory, PTY Standby

Reception is turned off. (“OFF” is selected for

PTY Standby Reception.)

Press

¢ / 4

(for KS-FX43R/

(for

KS-FX483R/KS-FX480R) or

KS-F383R/KS-F380R) to search for such a

station.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 22.)

When a station providing these signals is

tuned in, the PTY indicator stops flashing

and remains lit. Now PTY Standby Reception

is activated.

SEL

7 When the current source is other than FM,

the PTY indicator lights up.

If a station starts broadcasting the selected

PTY programme, this unit automatically

changes the source and tunes in to the station.

2 Select “PTY STBY” (standby) if not

shown on the display.

To deactivate the PTY Standby Reception,

select “OFF” in step 3 on the left column. The

PTY indicator disappears.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

3 Select one of the twenty-nine PTY

codes. (See page 17.)

Selected code name appears

on the display and is stored

into memory.

4 Finish the setting.

SEL

Download from Www.Somanuals.com. All Manuals Search And Download.

Searching your favorite programme

3 Press and hold the number button

for more than 2 seconds to store the

PTY code selected into the preset

number you want.

You can search any one of the PTY codes.

In addition, you can store your 6 favorite

programme types in the number buttons.

When shipped from the factory, the following 6

programme types have been stored in the

number buttons (1 to 6).

To store your favorite programme types, see

below.

To search your favorite programme type, see

“MEMORY” and the selected code name will

flash alternately on the display.

page 15.

4 Press and hold TP/PTY for more than

2 seconds to exit from this mode.

POP M

ROCK M

EASY M

TP/PTY

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

PTY

CLASSICS

AFFAIRS

VARIED

To store your favorite programme types

1 Press and hold TP/PTY for more than

2 seconds while listening to an FM

station.

KS-FX43R

KS-FX483R

KS-FX480R

TP/PTY

KS-F383R

KS-F380R

PTY

The last selected PTY code appears.

2 Select one of the twenty-nine PTY

codes. (See page 17.)

Selected code name appears

on the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

• If there is a station broadcasting a programme

of the same PTY code as you selected, that

station is tuned in.

• If there is no station broadcasting a programme

of the same PTY code as you selected, the

station will not change.

To search your favorite programme type

1 Press and hold TP/PTY for more than

2 seconds while listening to an FM

station.

TP/PTY

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

PTY

Note:

In some areas, the PTY search will not work correctly.

Other convenient RDS

The last selected PTY code appears.

functions and adjustments

2 To select one of your favorite

Automatic selection of the station

when using the number buttons

programme type

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting. (Programme search)

To select any one of the twenty-nine

PTY-codes

• The unit takes some time to tune in to another

station using programme search.

To activate programme search, follow the

procedure below.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 22.)

Ex.: When “ROCK M” is selected

3 Press

KS-FX483R/KS-FX480R) or

KS-F383R/KS-F380R) to start PTY

search for your favorite programme.

¢ / 4

(for KS-FX43R/

2 Press

¢ / 4

(for KS-FX43R/

(for

KS-FX483R/KS-FX480R) or

KS-F383R/KS-F380R) to select

“P(Programme)-SEARCH.”

3 Press + to select “ON.”

Now programme search is activated.

KS-FX43R

KS-FX483R

KS-FX480R

KS-F383R

KS-F380R

4 Press SEL (select) to finish the setting.

To cancel programme search, repeat the same

procedure and select “OFF” in step 3 by pressing –.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the display mode while

listening to an FM station

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

the volume level automatically changes to the

preset level.

You can change the initial indication on the

display to station name (PS NAME), station

frequency (FREQ), or clock time (CLOCK) while

listening to an FM RDS station.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 22.)

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 22.)

2 Press

¢ / 4

KS-FX483R/KS-FX480R) or

(for KS-FX43R/

(for

2 Press

¢ / 4

KS-FX483R/KS-FX480R) or

(for KS-FX43R/

(for

KS-F383R/KS-F380R) to select “TA VOL”

(volume).

3 Press + or – to set to the desired volume.

You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

KS-F383R/KS-F380R) to select “DISPMODE”

(display mode).

3 Press + or – to set to the desired indication

(“PS NAME,” “FREQ,” or “CLOCK”).

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

Note:

By pressing DISP (display), you can change the

display while listening to an FM RDS station.

Each time you press the button, the following

information appears on the display:

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically using

the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

Station name

(PS NAME)

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 22.)

Programme type

(PTY)

2 Press

¢ / 4

KS-FX483R/KS-FX480R) or

(for KS-FX43R/

(for

KS-F383R/KS-F380R) to select “AUTO ADJ”

(adjustment).

3 Press – to select “OFF.”

Station frequency

(FREQ)

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

Clock

(CLOCK)

To reactivate clock adjustment, repeat the same

procedure and select “ON” in step 3 by pressing +.

• Then, the display goes back to the original

indication in several seconds.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ON.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

Download from Www.Somanuals.com. All Manuals Search And Download.

PTY codes

NEWS:

AFFAIRS:

News

CHILDREN: Entertainment programmes for

children

Topical programmes expanding

on current news or affairs

Programmes which impart

advice on a wide variety of

topics

SOCIAL:

Programmes on social activities

INFO:

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

nature of existence or ethics

SPORT:

Sport events

PHONE IN: Programmes where people can

express their views either by

EDUCATE: Educational programmes

DRAMA: Radio plays

phone or in a public forum

CULTURE: Programmes on national or

regional culture

SCIENCE: Programmes on natural

science and technology

TRAVEL:

LEISURE:

JAZZ:

Programmes about travel

destinations, package tours, and

travel ideas and opportunities

Programmes concerned with

recreational activities such as

gardening, cooking, fishing, etc.

Jazz music

VARIED:

Other programmes like

comedies or ceremonies

Pop music

POP M:

ROCK M:

EASY M:

LIGHT M:

CLASSICS: Classical music

OTHER M: Other music

Rock music

Easy-listening music

Light music

COUNTRY: Country music

NATION M:

Current popular music from

another nation or region, in that

country’s language

Classic pop music

Folk music

OLDIES:

FOLK M:

WEATHER: Weather information

FINANCE:

Reports on commerce, trading,

the Stock Market, etc.

DOCUMENT: Programmes dealing with factual

matters, presented in an

investigative style

The same programme can be received on different frequencies.

Programme 1

broadcasting on

frequency A

Programme 1

broadcasting on

frequency E

Programme 1

broadcasting on

frequency B

Programme 1

broadcasting on

Programme 1

frequency C

broadcasting on

frequency D

Download from Www.Somanuals.com. All Manuals Search And Download.

TAPE OPERATIONS

To stop play and eject the cassette

Press 0.

Listening to a cassette

You can play back type I (normal) tapes.

Tape play stops and the cassette ejects from the

cassette compartment. The source changes to

the previously selected one.

• You cannot change the source if the cassette is

still in the cassette compartment.

To change the source, you must eject the

cassette first.

1 Turn on the power.

Note on One-Touch Operation:

• You can also eject the cassette by pressing 0

while the unit is turned off.

If a cassette is already in the cassette

compartment, tape play starts automatically.

However, it is not recommended to leave the

cassette in the compartment when turning off the

power or ignition key. It may damage the tape

head and the cassette.

To fast-wind a tape

2 Insert a cassette into the cassette

compartment.

Press in ¡ or 1.

The tape will be wound in the direction of the

arrows (¡ or 1).

When one side of the tape

reaches its end during play,

the other side of the tape

automatically starts playing

(Auto Reverse).

3 Select the tape direction.

Tape direction

Press both buttons at the

same time.

Each time you press both

buttons, the tape direction

changes alternately—

To restart playback, lightly press the other

button which is not pressed in (1 or ¡).

forward (

reverse (

) and

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

Adjusting the sound

2 Adjust the setting.

You can adjust the sound characteristics to your

preference.

To increase the level or turn on

the loudness

To decrease the level or turn off

the loudness

1 Select the item you want to adjust.

Each time you press the

SEL

button, the adjustable items

change as follows:

Ex.: When you adjust “TRE” (treble)

For KS-FX43R/KS-FX483R/KS-FX480R:

BAS

TRE

FAD

(bass)

(treble)

(fader)

To turn on or off the loudness function

(For KS-F383R/KS-F380R)

VOL

LOUD

BAL

(volume)

(loudness)

(balance)

Each time you press LOUD,

the loudness function turns

on and off alternately.

LOUD

For KS-F383R/KS-F380R:

BAS

TRE

FAD

(bass)

(treble)

(fader)

VOL

(volume)

BAL

(balance)

3 Repeat steps 1 and 2 to adjust the

other items.

Indication

To do:

Range

BAS

Adjust the bass.

Adjust the treble.

–06 (min.)

+06 (max.)

Note:

Normally the +/– buttons work as the volume control.

So you do not have to select “VOL” to adjust the

volume level.

TRE

–06 (min.)

+06 (max.)

FAD*

BAL

Adjust the front

and rear speaker

balance.

R06 (Rear only)

F06 (Front only)

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

LOUD**

Boost low and high

frequencies to

LOUD ON

produce a well-

balanced sound

at low volume level.

LOUD OFF

VOL

Adjust the volume. 00 (min.)

50 (max.)

* If you are using a two-speaker system, set the fader

level to “00.”

** For KS-FX43R/KS-FX483R/KS-FX480R.

For KS-F383R/KS-F380R, press LOUD to turn on

or off the loudness function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Storing your own sound

adjustments

Selecting preset sound modes

You can select a preset sound adjustment

suitable to the music genre.

You can adjust the sound modes (BEAT, SOFT,

POP) to your preference and store your own

adjustments in memory.

Select the sound mode you want.

SCM

Each time you press the button,

the sound mode changes as

follows:

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

SCM OFF

1 Call up the sound mode you want to

(BEAT)

(SOFT) (POP)

adjust.

SCM

• See the left column for details.

Indication

For:

Preset values

BAS TRE LOUD

2 Make adjustments.

SCM OFF (Flat sound)

OFF

• For details, see “Adjusting the sound” on

page 19.

BEAT

Rock or disco +02

music

SOFT

Quiet

background

music

+01 –03

OFF

3 Repeat step 2 to adjust the other

items.

POP

Light music

+04 +01

4 Press and hold SCM until the sound

mode you have selected in step 1

flashes on the display.

Notes:

• You can adjust each sound mode to your preference,

and store it in memory.

SCM

Your adjustment made for the

selected sound mode is stored in

memory.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments”

that follows.

5 Repeat the same procedure to store

• To adjust the bass and treble reinforcement levels or

to turn on/off the loudness function, see page 19.

other sound modes.

To reset each sound mode to the factory

settings, repeat the same procedure and

reassign the preset values listed in the table on

the left column.

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHER MAIN FUNCTIONS

Selecting the CD changer

Selecting the telephone muting

display

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “MUTING 1” or “MUTING 2,”

whichever mutes the sounds from this unit.

When shipped from the factory, this mode is

deactivated.

Only for KS-FX43R/KS-FX483R/KS-FX480R.

You can change the initial indication on the

display either to disc number or to elapsed

playing time, while using the CD changer.

When shipped from the factory, “DISC” is

selected.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See page 22.)

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See page 22.)

SEL

2 Select “TEL” (telephone muting).

2 Select “CH DISP” (changer display).

3 Select the desired mode—“MUTING

1,”“MUTING 2,” or “OFF.”

3 Select the desired mode—“DISC” or

“TIME.”

• MUTING 1: Select this if this setting can

mute the sounds.

• MUTING 2: Select this if this setting can

mute the sounds.

• DISC:

• TIME:

Shows the disc number and

track number.

Shows the elapsed playing

time and track number.

• OFF:

Cancels the telephone muting.

4 Finish the setting.

SEL

Download from Www.Somanuals.com. All Manuals Search And Download.

Preferred Setting Mode (PSM) items

• For detailed operations of each PSM item, refer to the pages listed in the table.

SEL

See

page

Factory-

preset

settings

Hold.

Select.

Set.

KS-FX43R/KS-FX483R/ KS-F383R/

KS-F380R

KS-FX480R

–

Back

Advance

CLOCK H

CLOCK M

24H/12H

Hour adjustment

0:00

Back

12H

OFF

Advance

24H

Minute adjustment

24/12-hour time display

24H

AUTO ADJ Automatic clock setting

DISPMODE Display mode

CLOCK

PS NAME

DISC

FREQ

CH DISP*

AF-REG

Changer display

TIME

DISC

Alternate frequency/

Regionalization reception

AF REG

OFF

29 programme types

(see page 17)

PTY STBY PTY standby

OFF

TA VOL

Traffic announcement volume

VOL 00 – VOL 50

VOL 20

OFF

P-SEARCH Programme search

OFF

TEL

Telephone muting

MUTING 1

MUTING 2

OFF

• Press SEL (select) to finish the setting.

* Only for KS-FX43R/KS-FX483R/KS-FX480R.

Download from Www.Somanuals.com. All Manuals Search And Download.

Attaching the control panel

Detaching the control panel

1 Insert the left side of the control

panel into the groove on the panel

holder.

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the right side of the control

panel to fix it to the panel holder.

2 Lift and pull the control panel out of

the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

Download from Www.Somanuals.com. All Manuals Search And Download.

CD CHANGER OPERATIONS

This section is only for KS-FX43R/KS-FX483R/

KS-FX480R.

Playing CDs

Select the CD changer (CD-CH).

We recommend that you use one of the CH-X

series with your unit (except for JVC MP3-

compatible CD changer).

Playback starts from the first

CD-

track of the first disc.

All tracks of all discs will be

played back.

If you have another CD changer, consult your

JVC IN-CAR ENTERTAINMENT dealer for

connections.

• For example, if your CD changer is one of the KD-

MK series, you need a cord (KS-U15K) for

connecting it to this unit.

Disc number

Track number

Before operating your CD changer:

• Refer also to the Instructions supplied with

your CD changer.

• If no discs are in the magazine of the CD

changer or the discs are inserted upside

down, “NO CD” will appears on the display.

If this happens, remove the magazine and

set the discs correctly.

Note on One-Touch Operation:

When you press CD-CH, the power automatically

turns on. You do not have to press

on the power.

to turn

To check the elapsed playing time

• If no magazine is loaded in the CD changer,

“NO MAG” appears on the display. If this

happens, insert the magazine in the CD

changer.

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer. If this happens, check the

connection and make sure the cords are

connected firmly. Then, press the reset

button of the CD changer.

Press DISP (display) repeatedly.

DISP

Each time you press the button,

the display mode changes as

follows:

Disc number

Clock

Elapsed playing time

Download from Www.Somanuals.com. All Manuals Search And Download.

To fast-forward or reverse the track

To go to a particular disc directly

Press the number button corresponding to the

disc number to start its playback (while the CD

changer is playing).

Press and hold

playing a CD, to fast-forward the

track.

¢, while

Press and hold 4

, while

playing a CD, to reverse the track.

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

To go to the next or previous tracks

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

Press

¢ briefly, while playing

a CD, to go ahead to the beginning

of the next track.

Each time you press the button

consecutively, the beginning of the

next track is located and played

back.

Disc number

Press 4

briefly, while playing

Track number

a CD, to go back to the beginning of

the current track.

Ex.: When disc number 3 is selected.

Each time you press the button

consecutively, the beginning of the

previous tracks is located and

played back.

Selecting CD playback modes

To play back tracks at random

(Random Play)

MO/RND

Each time you press the button,

CD random play mode changes

as follows:

RND1

RND2

Canceled

RND

Indicator

Mode

Plays at random

RND1

(random1)

Lights

All tracks of the current

disc, then the tracks of

the next disc, and so on.

RND2

(random2)

Flashes All tracks of all discs

inserted in the

magazine.

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

This unit requires very little attention, but you will

be able to extend the life of the unit if you follow

the instructions below.

To keep the tape clean

To clean the head

• Always store the cassettes to their storage

cases after use.

• Do not store cassettes in the following places:

– Subject to direct sunlight

– With high humidity

– At extremely hot temperatures

• Clean the head after every 10 hours of use

using a wet-type head cleaning tape (available

at an audio store).

When the head becomes dirty, you may realize

the following symptoms:

– Sound quality is reduced.

– Sound level decreases.

– Sound drops out.

CAUTION:

• Do not play the cassettes with peeling labels;

otherwise, they can damage the unit.

• Tighten tapes to remove slack since loose tape

may become entangled with the mechanism.

• Do not leave a cassette in the cassette

compartment after use, as the tape may become

slack.

• Do not play dirty or dusty tapes.

• Do not touch the highly-polished head with any

metallic or magnetic tools.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

Connections are incorrect.

Check the cords and

connections.

• Sound is sometimes

interrupted.

The volume is set to the

minimum level.

Adjust it to the optimum level.

• Sound cannot be heard

from the speakers.

Connections are incorrect.

Check the cords and

connections.

The built-in microcomputer may

function incorrectly due to noise,

etc.

While holding SEL (select), press

(standby/on/attenuator)

for more than 2 seconds to reset

the unit. (The clock setting and

preset stations stored in memory

are erased.) (See page 2.)

• The unit does not work

at all.

• SSM (Strong-station

Sequential Memory)

automatic preset does

not work.

Signals are too weak.

Store stations manually.

• Static noise while

listening to the radio.

The antenna is not connected

firmly.

Connect the antenna firmly.

• A cassette tape cannot

be inserted.

You have tried to insert a

cassette in the wrong way.

Insert the cassette with the

exposed tape facing right.

• Cassette tapes become

This is not a malfunction.

hot.

• Tape sound is at very low The tape head is dirty.

level and sound quality is

Clean it with a head cleaning

tape.

degraded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Only for KS-FX43R/KS-FX483R/KS-FX480R

Symptoms

Causes

Remedies

Insert CDs into the magazine.

Insert them correctly.

• “NO CD” appears on the No CD is in the magazine.

display.

CDs are inserted incorrectly.

• “NO MAG” appears on

the display.

No magazine is loaded in the

CD changer.

Insert the magazine.

• “RESET 8” appears on

the display.

This unit is not connected to a

CD changer correctly.

Connect this unit and the CD

changer correctly and press the

reset button of the CD changer.

• “RESET 1” – “RESET 7”

appears on the display.

Press the reset button of the CD

changer.

• The CD changer does

not work at all.

The built-in microcomputer may

function incorrectly due to noise,

etc.

While holding SEL (select), press

(standby/on/attenuator)

for more than 2 seconds to reset

the unit. (The clock setting and

preset stations stored in memory

are erased.) (See page 2.)

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

CASSETTE DECK SECTION

AUDIO AMPLIFIER SECTION

Wow & Flutter: 0.15% (WRMS)

Fast-Wind Time: 190 sec. (C-60)

Frequency Response: 50 Hz to 14 000 Hz

(Normal tape)

Signal-to-Noise Ratio: 52 dB

Stereo Separation: 40 dB

Maximum Power Output:

Front: 45 W per channel

Rear: 45 W per channel

Continuous Power Output (RMS):

Front: 17 W per channel into 4 Ω, 40 Hz to

20 000 Hz at no more than 0.8%

total harmonic distortion.

Rear: 17 W per channel into 4 Ω, 40 Hz to

20 000 Hz at no more than 0.8%

total harmonic distortion.

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Bass:

10 dB at 100 Hz

Treble: 10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

188 mm × 58 mm × 11 mm

Mass (approx.):

KS-FX43R/KS-FX483R/KS-FX480R:

2.0 V/20 kΩ load (250 nWb/m)

KS-F383R/KS-F380R:

1.0 V/20 kΩ load (250 nWb/m)

1.3 kg (excluding accessories)

TUNER SECTION

Frequency Range:

Design and specifications are subject to change

without notice.

FM:

AM:

87.5 MHz to 108.0 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Download from Www.Somanuals.com. All Manuals Search And Download.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Haben Sie PROBLEME mit dem Betrieb?

Bitte setzen Sie Ihr Gerät zurück

Siehe Seite Zurücksetzen des Geräts

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

Hebt u PROBLEMEN met de bediening?

Stel het apparaat terug

Zie de pagina met de paragraaf Het apparaat terugstellen

EN, GE, FR, NL

1202KKSMDTJEIN

Download from Www.Somanuals.com. All Manuals Search And Download.

KS-FX43R/KS-FX483R/KS-FX480R

KS-F383R/KS-F380R

Installation/Connection Manual

Einbau/Anschlußanleitung

Manuel d’installation/raccordement

Handleiding voor installatie/aansluiting

1202KKSMDTJEIN

EN, GE, FR, NL

GET0110-003A

[E/EX]

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

• This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems.

• Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt.

• Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE.

• Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met negatieve

aarding.

INSTALLATION

EINBAU

INSTALLATION (MONTAGE

INSTALLATIE (INBOUW IN

(IN-DASH MOUNTING)

(IM ARMATURENBRETT)

DANS LE TABLEAU DE BORD) HET DASHBOARD)

• The following illustration shows a typical installation. • Die folgende Abbildung zeigt einen typischen

• L’illustration suivante est un exemple d’installation

typique. Cependant, vous devez faire les

ajustements correspondant à votre voiture

particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation,

consulter votre revendeur d’autoradios JVC ou une

compagnie d’approvisionnement.

• Op de volgende afbeelding kunt u zien hoe de installatie,

normaal gesproken, in zijn werk gaat. U moet echter bij

de installatie rekening houden met de bijzonderheden

van uw eigen auto. Neem bij vragen of voor meer

bijzonderheden over inbouwpakketten contact op met uw

JVC car audio dealer of een dealer of een bedrijf dat

inbouwpakketten levert.

However, you should make adjustments

corresponding to your specific car. If you have any

questions or require information regarding

installation kits, consult your JVC IN-CAR

ENTERTAINMENT dealer or a company supplying

kits.

Einbau. Dennoch müssen Sie entsprechend Ihrem

jeweiligen Auto Anpassungen vornehmen. Bei

irgendwelchen Fragen oder wenn Sie

Informationen hinsichtlich des Einbausatzes

brauchen, wenden Sie sich an ihren JVC

Autoradiohändler oder ein Unternehmen das diese

Einbausätze vertreibt.

1 Before mounting: Press

(control panel

release button) to detach the control panel if

already attached.

1 Vor dem Einbau: Drücken Sie

(Freigabe der 1 Avant le montage: Appuyer sur

(déblocage

du panneau de commande) pour éventeullement

détacher le panneau de commande.

1 Voordat u aan de montage van het apparaat

Schalttafel), um die Arretierung der Schalttafel zu

lösen, sofern diese bereits angebracht ist.

begint: Druk op

(het bedieningspaneel

vrijgeven) als u het bedieningspaneel wilt loskoppelen

indien dit aan de eenheid is vastgekoppeld.

* Lorsque ce panneau de commande sort d’usine,

il est rangé dans un étui de transport.

* Bei der Auslieferung ab Werk ist die Schalttafel

im Etui verpackt.

* When shipped from the factory, the control

panel is packed in the hard case.

* Standaard wordt het bedieningspaneel bij het

verlaten van de fabriek los verpakt meegeleverd.

2 Retirer la plaque d’assemblage.

2 Den Frontrahmen herausnehmen.

2 Remove the trim plate.

2 Verwijder de sierplaat.

3 Libérer les verrous du manchon et retirer le

3 Die Halterung nach dem Entriegeln der

3 Remove the sleeve after disengaging the sleeve

manchon.

3 Verwijder het huis nadat u de klemmen hebt

Halterungensperren abnehmen.

locks.

losgemaakt.

1 Poser l’appareil à la verticale.

1 Das Gerät aufstellen.

1 Stand the unit.

1 Zet het apparaat rechtop.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

Hinweis: Beim Aufstellen des Geräts darauf

achten, daß die Sicherung auf der Rückseite

nicht beschädigt wird.

Note: When you stand the unit, be careful not

to damage the fuse on the rear.

Opmerking: Wanneer u het apparaat rechtop zet,

moet u erop letten dat u de zekering aan de

achterkant niet beschadigt.

2 Insert the 2 handles between the unit and the

sleeve, as illustrated, to disengage the sleeve

locks.

2 Insérer les 2 poignées entre l’appareil et le

manchon comme indiqué pour désengagé les

verrous de manchon.

2 Die 2 Griffe zwischen dem Gerät und der

Halterung wie abgebildet einstecken und die

Halterungensperren entriegeln.

2 Plaats de 2 hendels, zoals afgebeeld, tussen het

apparaat en het huis, om de klemmen los te

maken.

3 Remove the sleeve.

3 Retirer le manchon.

3 Die Halterung entfernen.

Note: Be sure to keep the handles for future

use after installing the unit.

3 Verwijder het huis.

Remarque: S’assurer de garder les poignées

pour une utilisation ultérieur, après l’installation

de l’appareil.

Hinweis: Sicherstellen, daß die Griffe für

künftigen Gebrauch nach dem Einbau des

Geräts aufbewahrt werden.

Opmerking: Bewaar de hendels nadat u het

apparaat hebt geïnstalleerd, zodat u ze ook in de

toekomst kunt gebruiken.

4 Install the sleeve into the dashboard.

* After the sleeve is correctly installed into the

dashboard, bend the appropriate tabs to hold

the sleeve firmly in place, as illustrated.

4 Installer le manchon dans le tableau de bord.

4 Die Halterung im Armaturenbrett einbauen.

4 Installeer het huis in het dashboard.

* Après installation correcte du manchon dans le

tableau de bord, plier les bonnes pattes pour

maintenir fermement le manchon en place,

comme montré.

* Nach dem korrekten Einbau der Halterung im

Armaturenbrett, die entsprechenden Riegel

umknicken, um die Halterung an ihrem Platz zu

sichern, siehe Abbildung.

* Nadat het huis op de juiste wijze in het dashboard is

geplaatst, moet u de palletjes, zoals afgebeeld,

stevig op hun plaats duwen.

5 Fix the mounting bolt to the rear of the unit’s

body and place the rubber cushion over the end

of the bolt.

5 ^{Monter le boulon de montage sur l’arrière du corps}5 Maak de bevestigingsbout aan de achterkant van het

5 Die Befestigungsschraube an der Rückseite des

Gerätekörpers befestigen und das Ende der

Schraube mit einem Gummipuffer abdecken.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

8 Attach the trim plate.

de l’appareil puis passer l’amortisseur en

caoutchouc sur l’extrémité du boulon.

apparaat vast en plaats de rubberdop over het uiteinde

van de bout.

6 Réalisez les connexions électriques.

6 Breng de vereiste elektrische verbindingen tot stand.

7 ^{Faire glisser l’appareil dans le manchon jusqu’à ce}7 Schuif het apparaat in het huis totdat het vergrendeld is.

6 Nehmen Sie die erforderlichen elektrischen

Anschlüsse vor.

9 Attach the control panel.

qu’il soit verrouillé.

7 Das Gerät in die Halterung schieben, bis es

8 Bevestig een sierplaat.

einrastet.

8 Attachez la plaque d’assemblage.

9 Bevestig het bedieningspaneel.

8 Befestigen Sie den Frontrahmen.

9 Die Schalttafel anbringen.

9 Remonter le panneau de commande.

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Handle

Griff

Poignée

Hendel

184 mm

Sleeve

53 mm

Halterung

Manchon

Huis

Lock Plate

Arretierplättchen

Plaque de verrouillage

Vergrendelingsplaat

Mounting bolt

Slot

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Schlitz

Fente

Sleuf

Fuse

Sicherung

Fusible

Zekering

See “ELECTRICAL CONNECTIONS.”

Siehe „ELEKTRISCHE ANSCHLÜSSE“.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Control panel

Schalttafel

Zie “ELEKTRISCHE VERBINDINGEN”.

Sleeve

Trim plate

Halterung

Manchon

Huis

Frontrahmen

Plaque d’assemblage

Sierplaat

Panneau de commande

Bedieningspaneel

Download from Www.Somanuals.com. All Manuals Search And Download.

•When using the optional stay

•When installing the unit without using the sleeve

•Beim Einbau des Geräts ohne Halterung

•Beim Verwenden der Anker-Option

•Lors de l’utilisation du hauban en option

•Wanneer u de steun gebruikt (facultatief)

•Lors de l’installation de l’appareil scans utiliser de manchon

•Wanneer u het apparaat zonder huis installeert

In a Toyota for example, first remove the car radio and install the unit in its place.

Washer

Unterlegscheibe

Rondelle

Sluitring

Fire wall

Feuerwand

Cloison

Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.

Stay (option)

Anker (Option)

Hauban (en option)

Steun (facultatief)

Brandscherm

* Not included with this unit.

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

* Nicht Teil dieses Geräts.

* Non fourni avec cet appareil.

* Niet meegeleverd.

Lock nut

Dashboard

Sicherungsmutter

Ecrou d’arrêt

Contra-moer

Armaturenbrett

Tableau de bord

Dashboard

Bracket*

Konsole*

Support*

Console*

Screw (option)

Schraube (Option)

Vis (en option)

Schroef (facultatief)

Pocket

Sleeve

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Taschen

Poche

Zak

Mounting bolt

Bracket*

Konsole*

Support*

Console*

Halterung

Manchon

Huis

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Install the unit at an angle of

less than 30˚.

Stellen Sie das Gerät mit einem

Winkel von weniger als 30˚ auf.

Installez l’appareil avec un angle

de moins de 30˚.

Note:

When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws are used,

they could damage the unit.

Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben verwendet werden. Werden

längere Schrauben verwendet, können sie das Gerät beschädigen.

Less than 30˚

Hinweis:

Weniger als 30˚

Moins de 30˚

Kleiner dan 30˚

Remarque: Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une longueur de 6 mm. Si des

vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Opmerking: Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven gebruiken. Als u langere schroeven

Installeer het toestel met een hoek

kleiner dan 30˚.

gebruikt, kan het apparaat worden beschadigd.

Ausbau des Geräts

• Vor dem Ausbau des Geräts den hinteren Teil

freigeben.

Retrait de l’appareil

• Avant de retirer l’appareil, libérer la section arrière.

Verwijderen van het apparaat

• Voordat u het apparaat verwijdert, moet u het

Removing the unit

• Before removing the unit, release the rear section.

achtergedeelte losmaken.

1 Remove the control panel.

2 Remove the trim plate.

3 Insert the 2 handles into the slots, as shown. Then,

while gently pulling the handles away from each

other, slide out the unit. (Be sure to keep the

handles after installing it.)

1 Retirer le panneau de commande.

2 Retirer la plaque d’assemblage.

3 Introduire les 2 poignées dans les fentes, comme

montré. Puis, tout en tirant doucement les

poignées écartées, faire glisser l’appareil pour le

sortir. (S’assurer de conserver les poignées

après l’installation de l’appareil.)

1 Den Schalttafel abnehmen.

2 Den Frontrahmen herausnehmen.

3 Die 2 Griffe in die Schlitze wie gezeigt stecken.

Dann die Griffe behutsam auseinander ziehen

und das Gerät herausziehen. (Die Griffe nach

dem Einbau auf jeden Fall aufbewahren.)

1 Verwijder het bedieningspaneel.

2 Verwijder de sierplaat.

3 Plaats de 2 hendels, zoals afgebeeld, in de sleuven.

Daarna duwt u de hendels zachtjes uit elkaar en kunt u

het apparaat naar buiten schuiven. (Bewaar de

hendels nadat u het apparaat hebt

geïnstalleerd!)

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Trim plate

Handle

Griff

Poignée

Hendel

Frontrahmen

Plaque d’assemblage

Sierplaat

Parts list for installation and connection

The following parts are provided with this unit.

After checking them, please set them correctly.

Liste des pièces pour l’installation et Lijst van onderdelen die u bij

Teileliste für den Einbau und Anschluß

raccordement

installatie en aansluiting nodig hebt

Die folgenden Teile werden zusammen mit diesem

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

Gerät geliefert.

De volgende onderdelen worden bij het apparaat geleverd.

Installeer ze op de juiste wijze, nadat u ze hebt gecontroleerd.

Nach ihrer Überprüfung, die Teile richtig einsetzen.

Trim plate

Power cord

Stromkable

Cordon d’alimentation

Stroomkabel

Hard case/Control panel

Etui/Schalttafel

Etui de transport/Panneau

de commande

Sleeve

Frontrahmen

Plaque d’assemblage

Sierplaat

Halterung

Manchon

Huis

Behuizing/Bedieningspaneel

Handles

Griffe

Poignées

Hendels

Washer (ø5)

Lock nut (M5)

Mounting bolt (M5 x 20 mm)

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Unterlegscheibe (ø5)

Rondelle (ø5)

Sluitring (ø5)

Sicherungsmutter (M5)

Ecrou d’arrêt (M5)

Contra-moer (M5)

Befestigungsschraube (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Bevestigingsbout (M5 x 20 mm)

ELECTRICAL CONNECTIONS

ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN

To prevent short circuits, we recommend that you

Zur Vermeidung von Kurzschlüssen empfehlen wir,

Pour éviter tout court-circuit, nous vous

Om kortsluiting te voorkomen adviseren wij u om de

minpool van de accu los te maken en alle elektrische

verbindingen tot stand te brengen voordat u het apparaat in

disconnect the battery’s negative terminal and make all daß Sie den negativen Batterieanschluß abtrennen

recommandons de débrancher la borne négative de

la batterie et d’effectuer tous les raccordements

électriques avant d’installer l’appareil. Si l’on n’est pas de auto installeert. Als u niet zeker weet hoe u dit apparaat

sûr de pouvoir installer correctement cet appareil, le

faire installer par un technicien qualifié.

electrical connections before installing the unit. If you

are not sure how to install this unit correctly, have it

installed by a qualified technician.

und alle elektrischen Anschlüsse herstellen, bevor

das Gerät eingebaut wird. Sind Sie sich über den

richtigen Einbau des Geräts nicht sicher, lassen Sie

es von einem qualifizierten Techniker einbauen.

moet installeren, kunt u dit beter door een daartoe

gekwalificeerde technicus laten doen.

Note:

This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems. If your vehicle

does not have this system, a voltage inverter is

required, which can be purchased at JVC IN-CAR

ENTERTAINMENT dealers.

Hinweis:

Remarque:

Opmerking:

Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt. Verfügt Ihr Fahrzeug nicht über diese

Anlage, ist ein Spannungsinverter erforderlich, der

bei JVC Autoradiohändler erworben werden kann.

Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE. Si votre véhicule n’offre pas ce type

d’alimentation, il vous faut un convertisseur de

tension, que vous pouvez acheter chez un revendeur

d’autoradios JVC.

Dit apparaat mag worden gebruikt bij elektrische systemen

die werken op 12 V gelijkstroom met negatieve

aarding. Als uw auto niet is uitgerust met een dergelijk

systeem, is een spanningsomzetter vereist. Dit instrument

kan worden aangeschaft bij JVC car audio dealers.

• Replace the fuse with one of the specified rating. If

the fuse blows frequently, consult your JVC IN-CAR

ENTERTAINMENT dealer.

• Vervang de zekering door een exemplaar met het

aangegeven vermogen. Als de zekering vaak doorslaat,

moet u uw JVC car audio dealer raadplegen.

• Als u geluidsproblemen hebt…

De krachtschakeling van dit apparaat heeft een ingebouwd

geluidsfilter. In sommige voertuigen zijn tikgeluiden of

andere ongewenste geluiden te horen. Als dit gebeurt,

moet u de massaklem aan de achterkant (zie

aansluitingsschema) aan het chassis van de auto

vastmaken met behulp van een kortere en dikkere kabel,

zoals kopermanteldraad of tellerkabel. Als het geluid niet

verdwijnt, moet u contact opnemen met uw JVC car audio

dealer.

• Het maximum ingangsvermogen van de speakers moet

achterin meer dan 45 W zijn en voorin 45 W, met een

impedantie van 4 Ω tot 8 Ω.

• Zorg ervoor dat dit apparaat door middel van een

aardkabel is verbonden met het chassis van de

auto.

• Die Sicherung mit einer der entsprechenden

Nennleistung ersetzen. Brennt die Sicherung

häufig durch, wenden Sie sich an ihren JVC

Autoradiohändler.

• Remplacer le fusible par un de la valeur précisée. Si

le fusible saute souvent, consulter votre revendeur

d’autoradios JVC.

• If noise is a problem...

This unit incorporates a noise filter in the power

circuit. However, with some vehicles, clicking or other

unwanted noise may occur. If this happens, connect

the unit’s rear ground terminal (see connection

diagram) to the car’s chassis using shorter and

thicker cords, such as copper braiding or gauge wire.

If noise still persists, consult your JVC IN-CAR

ENTERTAINMENT dealer.

• Maximum input of the speakers should be more than

45 W at the rear and 45 W at the front, with an

impedance of 4 Ω to 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be careful

not to touch it when removing this unit.

• Sind Störgeräusche ein Problem...

• Si le bruit est un problème...

Dieses Gerät enthält ein Störfilter im Stromkreis. Bei

manchen Fahrzeugen kann jedoch ein Klicken

oder andere unerwünschte Störgeräusche

auftreten. Sollte das der Fall sein, die hintere

Erdungscanschlußklemme (siehe Schaltplan) des

Geräts am Fahrwerk des Fahrzeugs anschließen,

dabei kürzere und dickere Kabel wie

Cet appareil incorpore un filtre de bruit dans le

circuit d’alimentation. Cependant, avec certains

véhicules, quelques claquements ou autres bruits

non désirés risquent de se produire. Si cela arrive,

raccorder la borne arrière de masse de l’appareil

au châssis de la voiture (voir le diagramme de

raccordement) en utiliscant des cordons les plus

gros et les plus courts possibles telle qu’une barre

de cuivre ou une tresse. Si le bruit persiste,

consulter votre revendeur d’autoradios JVC.

• La puisscance admissible des enceintes devrait

supérieure à 45 W à l’arrière et à 45 W l’avant, avec

une impédance de 4 Ω à 8 Ω.

beispielsweise Kupfergeflechtdraht oder Stahldraht

verwenden. Bleibt Störgeräusch bestehen, wenden

Sie sich an Ihren JVC Autoradiohändler.

• Die maximale Eingangsleistung der Lautsprecher

sollte mehr als 45 W hinten und 45 W vorn bei einer

Impedanz von 4 Ω bis 8 Ω.

• Sicherstellen, daß das Gerät am Fahrwerk

geerdet wird.

• Das Abstrahlblech wird nach dem Gebrauch sehr

heiß. Beim Ausbau des Geräts darauf achten, das

Abstrahlblech nicht zu berühren.

• S’assurer de raccorder la mise à la masse de

cet appareil au châssis de la voiture.

• Le dissipateur de chaleur devient très chaud après

usage. Faire attention de ne pas le toucher en

retirant cet appareil.

Heat sink

Abstrahlblech

Dissipateur de chaleur

Warmte-opnemer

• De warmte-opnemer kan na gebruik erg heet worden.

Raak de warmte-opnemer niet aan wanneer u dit apparaat

van zijn plaats haalt.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen

Before connecting: Check the wiring in the vehicle

carefully. Incorrect connection may cause serious

damage to this unit.

The leads of the power cord and those of the

connector from the car body may be different in color. im Fahrzeug können sich farblich unterscheiden.

Vor dem Anschließen: Die Verdrahtung im Fahrzeug

sorgfältig überprüfen. Falsche Anschlüsse können

ernsthafte Schäden am Gerät hervorrufen.

Avant de commencer la connexion: Vérifiez

attentivement le câblage du véhicule. Une connexion

incorrecte peut endommager sérieusement l’appareil.

Alvorens de verbindingen tot stand te brengen:

Moet u de bedrading in de auto zorgvuldig. Het apparaat

kan door verkeerde verbindingen ernstige schade oplopen.

Die Leiter des Stromkabels und die Leiter des Anschlusses Le fil du cordon d’alimentation et ceux des connecteurs De draden van het stroomsnoer verschillen mogelijk van

du châssis de la voiture peuvent être différents en

couleur.

kleur metde aansluitingen op het chassis van de auto.

1 Connect the colored leads of the power cord to

the car battery, speakers and power aerial (if any)

in the following sequence.

Die farbigen Leitungen des Spannunsgversorgungskabels

an der Autobatterie, ontstekingsschakelaarden

Lautsprechern und dem Motorantenne (sofern

vorhanden) in folgender Reihenfolge anschließen.

1 Schwarz: Erdung

1 Sluit de gekleurde snoerdraden van de stroomkable in

de hierna genoemde volgorde aan op de accu van de

auto, de luidsprekers en de antenne (indien aanwezig).

1 Zwart: aarde

1 Connectez les fils de couleur du cordon

d’alimentation à la batterie de la voiture, aux

enceintes et à l’antenne automatique (s’il y en a

une) dans l’ordre suivant.

1 Black: ground

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to remote lead of other

equipment or power aerial if any (200 mA max.)

5 Brown: to cellular phone system

(For details, refer to the instructions of the

cellular phone.)

2 Geel: naar de accu van de auto (constant 12 V)

3 Rood: naar de aansluitklem van de accessoire

4 Blauw met witte streep: naar afstandsdraad van

andere apparatuur of antenne met circuit indien

aanwezig (200 mA max.)

5 Bruin: Naar het mobiele-telefoonsysteem

(Lees voor meer informatie de instructies die bij

de mobiele telefoon worden geleverd.)

2 Gelb: an Autobatterie (konstant 12 V)

3 Rot: zur einer Zubehöranschlußklemme

4 Blau mit weißem Streifen: zum Zusatzkabel des

anderen Geräts oder der Motorantenne, sofern

vorhanden (max. 200 mA)

1 Noir: à la masse

2 Jaune: à la batterie de la voiture (12 V constant)

3 Rouge: à une borne accessoire

4 Bleu avec bande blanche:au fil de télécommande

de l’autre appareil ou à l’antenne automatique s’il

y en a une (200 mA max.)

5 Marron: à un système de téléphone cellulaire

(Pour les détails, se référer aux instructions du

téléphone cellulaire.)

5 Braun: an Mobiltelefon

6 Others: to speakers

(Weitere informationen entnehmen Sie bitte der

Bedienungscanleitung des Mobiltelefons.)

6 Andere: zur Lautsprecher

6 Andere: naar de speakers

2 Connect the aerial cord.

2 Sluit de antenne aan.

3 Finally connect the wiring harness to the unit.

6 Autres: aux enceintes

2 Das Antennenkabel anschließen.

3 Verbind de draadbundel daarna met het apparaat.

Note: If your vehicle does not have any accessory

terminal, move the fuse from the fuse position 1

(initial position) to fuse position 2, and connect the

red lead (A7) to the positive (+) battery terminal.

• The yellow lead (A4) is not used in this case.

2 Connectez le cordon d’antenne.

3 Die Kabelbäume am Gerät anschließen.

Opmerking: Als uw voertuig niet beschikt over een

aansluitklem, moet u de zekering verplaatsen van stand 1

(beginstand) naar stand 2 en moet u de rode draad (A7)

met de pluspool (+) van de accu verbinden.

3 Finalement, connectez le faisceau de fils à l’appareil.

Hinweis: Verfügt Ihr Fahrzeug nicht über eine

Zubehöranschlußklemme, die Sicherung von der 1.

Sicherungsposition (Erstposition) in die 2.

Remarque: Si votre véhicule ne possède pas de borne

accessoire, déplacez le fusible de la position de fusible

Sicherungsposition versetzen, die rote Leitung (A7) an 1 (position originale) à la position de fusible 2 et connectez

• In dit geval wordt de gele draad (A4) niet gebruikt.

der (+) Batterieanschlußklemme anschließen.

le fil rouge (A7) à la borne positive (+) de la batterie.

• Die gelbe Leitung (A4) wird in diesem Fall nicht verwendet. • Le fil jaune (A4) n’est pas utilisé dans ce cas.

To steering wheel remote controller

—Only for KS-FX43R (see diagram

An Lenkradfernbedienung

—Nur für KS-FX43R (siehe Schaltplan

Pour la télécommande de volant

—Seulement pour le KS-FX43R

Only for KS-FX43R/KS-FX483R/KS-FX480R / Nur für KS-FX43R/KS-FX483R/KS-FX480R / Seulement pour le KS-FX43R/KS-FX483R/KS-FX480R /

Alleen voor KS-FX43R/KS-FX483R/KS-FX480R

)

When connecting a CD changer, we recommend to use one of the CH-X series CD changers (except for JVC MP3-compatible CD changer).

• If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).

Wenn Sie einen CD-Wechsler anschließen möchten, empfiehlt es sich, einen CD-Wechsler der Modellreihe CH-X zu verwenden (außer MP3-

kompatiblen CD-Wechsler von JVC).

JVC CD changer jack

Buchse für CD-Wechsler von JVC

Prise du changeur CD JVC

Aansluiting voor JVC CD-wisselaar

(voir le diagramme

)

Naar stuurwiel-afstandsbediening

—Alleen voor de KS-FX43R (zie schema

• Wenn Ihr CD-Wechsler zur Modellreihe KD-MK gehören, benötigen Sie ein anderes Kabel (KS-U15K).

Lors de la connexion d’un changeur CD, nous vous recommandons d’utiliser un des changeurs CD de la série CH-X (sauf pour les changeurs de CD

compatibles MP3 JVC).

)

• Si votre changeur appartient à la série KD-MK, vous avez besoin d’un cordon optionnel (KS-U15K).

Voor het aansluiten van een CD-wisselaar raden we een wisselaar uit de CH-X-serie aan (uitgezonderd de JVC MP3 compatibele CD-wisselaar).

• Als de CD-wisselaar die u wilt aansluiten uit de KD-MK-serie komt, hebt u een extra kabel nodig (KS-U15K).

Rear ground terminal

Hintere Erdungscanschlußklemme

Borne arrière de masse

B1 B3 B5 B7

Fuse position 1

1. Sicherungsposition

Position de fusible 1

Massaklem aan de achterkant

Fuse position 2

B2 B4 B6 B8

2. Sicherungsposition

Position de fusible 2

Zekering, stand 2

A5 A7

Zekering, stand 1

A2 A4

B1 B3 B5 B7

B2 B4 B6 B8

Ignition switch

Zündschalter

Interrupteur d’allumage

Contactschakelaar

A5 A7

15 A fuse / 15 A Sicherung /

Fusible 15 A / Zekering 15 A

Not included with this unit.

A2 A4

Line out

Wird nicht mit Gerät mitgeliefert.

Non fourni avec cet appareil.

Niet bij het apparaat inbegrepen.

(see diagram

)

Schutz kappen

Aerial terminal

Black

Signalausgang (siehe

Schaltplan

Schwarz

Noir

Zwart

Antennenanschlußklemme

Borne de l’antenne

Aansluitpunt antenne

)

To metallic body or chassis of the car

Sortie de ligne

(voir le diagramme

Uitgang

Zur metallenen Karosserie oder zum Fahrwerk des Autos

Vers corps métallique ou châssis de la voiture

Naar metalen ondergrond of chassis van de auto

)

(zie schema

)

Yellow*¹

Gelb*¹

Jaune*¹

Geel*¹

To a live terminal in the fuse block connecting to the car battery (bypassing

the ignition swich)

Zur einer stromführenden Anschlußklemme im Sicherungsblock zum

Anschließen an die Autobatterie (Umgehen des Zündschalters)

A une borne sous tension du porte-fusible connectée à la batterie de la

voiture (en dérivant l’interrupteur d’allumage)

To aerial

Zur Antenne

A l’antenne

Naar de antenne

*1 : Before checking the operation of this unit prior to

Fuse block

Sicherungsblock

Porte-fusible

Naar een onder spanning staande aansluitklem in het zekeringblok die is

aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)

installation, this lead must be connected, otherwise

power cannot be turned on.

*1 : Vor der Überprüfung der Funktionsfähigkeit des

Geräts vor dem Einbau, muß diese Leitung

angeschlossen werden, da sonst die

Stromversorgung nicht eingeschaltet werden kann.

*1 : Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil

ne peut pas être mis sous tension.

*1 : Voordat u controleert of het apparaat werkt (alvorens het te

installeren), moet deze draad aangesloten zijn. Als dit niet

het geval is, kan de stroom niet worden ingeschakeld.

Red

Rot

Rouge

Rood

To an accessory terminal in the fuse block

Zekeringblok

Zur einer Zubehöranschlußklemme im Sicherungsblock

Vers borne accessoire du porte-fusible

Naar een aansluitklem in het zekeringblok

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To remote lead of other equipment or power aerial if any

Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig

Brown

Braun

Marron

Bruin

To cellular phone system

Zur Moblitelephon

À un système de téléphone cellulaire

Naar het mobiele-telefoonsysteem

^A25

Purple

Lila

Violet

Paars

White with black stripe

Weiß mit schwarzem

Streifen

Blanc avec bande noire

Wit met zwarte streep

White

Weiß

Blanc

Wit

Gray with black stripe

Grau mit schwarzem

Streifen

Gray

Grau

Gris

Green with black stripe

Grün mit schwarzem

Streifen

Vert avec bande noire

Groen met zwarte streep

Purple with black stripe

Lila mit schwarzem

Streifen

Violet avec bande noire

Paars met zwarte streep

Gris avec bande noire

Grijs met zwarte streep

Grijs

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

Linker Lautsprecher (vorne)

Enceinte gauche (avant)

Linkerspeaker (voorin)

Rechter Lautsprecher (vorne)

Enceinte droit (avant)

Rechterspeaker (voorin)

Linker Lautsprecher (hinten)

Enceinte gauche (arrière)

Linkerspeaker (achterin)

Rechter Lautsprecher (hinten)

Enceinte droit (arrière)

Rechterspeaker (achterin)

TROUBLESHOOTING

* Are the red and black leads connected correctly?

• Power cannot be turned on.

* Is the yellow lead connected?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded * Ist die Lautsprecherausgangsleitung geerdet?

in common?

• Unit becomes hot.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded * Ist die Lautsprecherausgangsleitung geerdet?

in common?

FEHLERSUCHE

EN CAS DE DIFFICULTES

* Les fils rouge et noir sont-ils racordés

correctement?

PROBLEMEN OPLOSSEN

• The fuse blows.

• Die Sicherung brennt durch.

* Sind die roten und schwarzen Leitungen richtig

angeschlossen?

• Le fusible saute.

• De zekering slaat door.

* Zijn de rode en de zwarte draden op de juiste manier

aangesloten?

• Stromversorgung kann nicht eingeschaltet werden. • L’appareil ne peut pas être mise sous tension.

* Ist die gelbe Leitung angeschlossen?

• Kein Ton aus den Lautsprechern.

Ist die Lautsprecherausgangsleitung kurzgeschlossen? * Le fil de sortie d’enceinte est-il court-circuité?

• De stroom kan niet worden ingeschakeld.

* Is de gele draad aangesloten?

• Er komt geen geluid uit de speakers.

* Is de uitgaande speakerdraad kortgesloten?

* Le fil jaune est-elle raccordée?

• Pas de son des enceintes.

• Ton verzerrt.

• Le son est déformé.

• Het geluid wordt vervormd.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• Gerät wird heiß.

• L’appareil devient chaud.

• Het apparaat raakt verhit.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS sur l’alimentation et la

connexion des enceintes:

VOORZORGSMAATREGELEN bij het

verbinden van de stroomkabeldraad

met de speakers:

PRECAUTIONS on power supply and VORSICHTSMASSREGELN beim

speaker connections:

Anschließen der Stromversorgung

und Lautsprecher:

• NE CONNECTEZ PAS les fils d’enceintes du

cordon d’alimentation à la batterie; sinon,

l’appareil serait sérieusement endommagé.

• Connectez correctement le fil noir (a la masse), le fil

jaune (a la batterie de la voiture,12 V constant) et le

fil rouge (à la prise accessoire).

• DO NOT connect the speaker leads of the power

cord to the car battery; otherwise, the unit will

be seriously damaged.

• Connect the black lead (ground), yellow lead (to car

battery, constant 12 V), and red lead (to an

accessory terminal) correctly.

• BEFORE connecting the speaker leads of the

power cord to the speakers, check the speaker

wiring in your car.

– If the speaker wiring in your car is as

illustrated in Fig. 1 and Fig. 2 below, DO NOT

connect the unit using that original speaker wiring.

If you do, the unit will be seriously damaged.

Redo the speaker wiring so that you can connect

the unit to the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as

illustrated in Fig. 3, you can connect the unit

using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your

car, consult your car dealer.

• Verbind de speakerdraden van de stroomkabel

NIET met de accu van de auto; als u dit wel doet,

zal het apparaat ernstige schade oplopen.

• Sluit de zwarte draad (aarde), de gele draad (naar de accu

van de auto, constant 12 V) en de rode draad (naar de

aansluitklem van de accessoire) op de juiste wijze aan.

• VOORDAT u de speakerdraden van de stroomkabel met

de speakers verbindt, moet u de bedrading van de

speakers in uw auto controleren.

• Die Lautsprecherleitungen des Netzkabels

NICHT an der Autobatterie anschließen, da

sonst das Gerät schwer beschädigt wird.

• Die schwarze Leitung (Erdung), die gelbe Leitung

(zur Autobatterie, konstant 12 V) und die rote Leitung

(zur Zubehöranschlußklemme) richtig anschließen.

• VOR dem Anschließen der Lautsprecherleitungen

des Spannunsgversorgungskabels an die

Lautsprecher, die Lautsprecherverdrahtung in

Ihrem Auto überprüfen.

– Ist die Lautsprecherverdrahtung wie unten in

„Fig. 1“ und „Fig. 2“ abgebildet, das Gerät

NICHT mit der Originalverdrahtung der

Lautsprecher anschließen, da sonst das Gerät

schwer beschädigt wird.

Die Lautsprecherverdrahtung erneuern, so daß

Sie das Gerät an den Lautsprechern wie in

„Fig. 3“ abgebildet anschließen können.

– Ist die Lautsprecherverdrahtung in Ihrem Auto

wie in „Fig. 3“ abgebildet, können Sie das Gerät

mit der Originalverdrahtung der Lautsprecher in

Ihrem Auto anschließen.

• AVANT de connecter les fils d’enceintes du cordon

d’alimentation aux enceintes, vérifiez le câblage

des enceintes de votre voiture.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 1 ou Fig. 2

ci-dessous, NE CONNECTEZ PAS l’appareil en

utiliscant ce câblage original des enceintes. Si

vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de façon

que vous puissiez connecter l’appareil aux

enceintes comme montré sur la Fig. 3.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 3, vous pouvez

connecter l’appareil en utiliscant ce câblage

original d’enceintes pour votre voiture.

– Als de bedrading van de speakers eruitziet

zoals hieronder staat afgebeeld in Fig. 1 en

Fig. 2, mag het apparaat NIET worden aangesloten

met behulp van deze oorspronkelijke

speakerbedrading. Als u dat wel doet, zal het apparaat

ernstige schade oplopen.

Pas de bedrading van de speakers aan, zodat u het

apparaat met de speakers kunt verbinden, zoals staat

afgebeeld in Fig. 3.

– Als de bedrading van de speakers eruitziet

zoals staat afgebeeld in Fig. 3, kunt u het

apparaat aansluiten met behulp van de oorspronkelijke

speakerbedrading in uw auto.

– Si vous n’êtes pas sûrs du câblage d’enceintes de

votre voiture, consulter le concessionnaire de

votre voiture.

– Sind Sie sich über die Lautsprecherverdrahtung

in Ihrem Auto nicht sicher, wenden Sie sich an

Ihren Autohändler.

– Als u twijfels hebt over de speakerbedrading in uw

auto, moet u contact opnemen met uw autodealer.

Fig. 1

Fig. 2

Fig. 3

Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden

Twist the core wires when connecting.

Die Kerndrähte beim Anschließen verdrehen.

CAUTION / VORSICHT / PRECAUTION / LET OP!:

Torsader les âmes des fils en les raccordant.

Draai de kerndraden om elkaar heen wanneer u ze

wilt aansluiten.

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT VERWENDETEN Leitungen

mit Isolierklebeband umwickeln.

• Pour éviter les court-circuits, couvrir les bornes des

fils qui ne sont PAS UTILISÉS avec de la bande

isolante.

Solder the core wires to connect them securely.

Die Kerndrähte anlöten, um sie fest

anzuschließen.

Souder les âmes des fils pour les raccorder entre

eux de façon sûre.

Soldeer de kerndraden zodat ze stevig vast zitten.

• Om kortsluiting te voorkomen, moet u de aansluitklemmen

van ONGEBRUIKTE gekleurde draden met isolatieband bedekken.

Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /

Aansluitingen voor het toevoegen van andere apparatuur

You can connect an amplifier and other equipment to

upgrade your car stereo system.

• Connect the remote lead (blue with white stripe) to

the remote lead of the other equipment so that it

can be controlled through this unit.

• For amplifier only:

– Connect this unit’s line-out terminals to the

amplifier’s line-in terminals.

– Disconnect the speakers from this unit,

connect them to the amplifier. Leave the

speaker leads of this unit unused. (Cover the

terminals of these unused leads with

insulating tape, as illustrated above.)

Sie können einen Verstärker oder ein anderes Gerät

anschließen, um Ihre Autostereoanlage zu erweitern.

• Schließen Sie das Fernbedienungskabel (blau mit

weißem Streifen) an das Fernbedienungskabel des

anderen Geräts an, so daß es über dieses Gerät

gesteuert werden kann.

Vous pouvez connecter un amplificateur ou autre

appareil pour améliorer votre système autoradio.

• Connectez le fil de commande à distance (bleu

avec bande blanche) au fil de commande à

distance de l’autre appareil de façon qu’il puisse

être commandé via cet appareil.

Het is mogelijk om uw autostereosysteem uit te breiden

met een versterker of andere apparatuur.

• Verbind de externe kabel (blauw met witte streep) met de

externe kabel van het andere apparatuur zodat deze op

afstand vanaf deze apparaat kan worden bediend.

• Alleen voor een versterker:

• Nur für den Verstärker:

• Pour l’amplificateur seulement:

– Verbind de uitgang van het apparaat met de ingang van

de versterker.

– Die Anschlußklemmen am Ausgang dieses Gerät

an den Anschlußklemmen des Eingangs des

Verstärkers anschließen.

– Die Lautsprecher von diesem Gerät abtrennen

und am Verstärker anschließen. Die

Lautsprecherleitungen dieses Geräts unbenutzt

lassen. (Die Anschlußklemmen dieser nicht

verwendeten Leitungen mit Isolierklebeband

umwickeln, siehe Abbidung oben.)

– Raccorder les bornes de sortie ligne de cet appareil

aux bornes d’entrée ligne de l’amplificateur.

– Déconnectez les enceintes de cet appareil et

connectez-les à l’amplificateur. Laissez les fils

d’enceintes de cet appareil inutilisés.

(Recouvrir les extrémités de ces fils inutilisés

avec de la bande isolante comme montré ci-

dessus.)

– Koppel de speakers van dit apparaat los en

verbind ze aan de versterker. Gebruik de

speakerdraden van dit apparaat niet. (Plak de

aansluitklemmen van deze speakerdraden met

isolatieband af zoals hierboven is afgebeeld.)

Amplifier / Verstärker / Amplificateur / Versterker

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

Y-connector (not supplied with this unit)

Remote lead

Y-Anschluß (nicht mit diesem Gerät mitgeliefert)

Connecteur Y (non fourni avec cet appareil)

Y-connector (wordt niet bij dit apparaat geleverd)

Fernbedienungsleitung

Fil d’alimentation à distance

Afstandbedieningsdraad

JVC Amplifier

INPUT

JVC Verstärker

JVC Amplificateur

JVC Versterker

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To power aerial if any

Zur Motorantenne, sofern vorhanden

Vers l’antenne automatique, s’il y en a une

Naar de antenne (indien aanwezig)

*2 : Firmly attach the ground wire to the metallic body or to the chasis of the car—to the place not coated with paint (if coated

with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.

*2 : Verbinden Sie den Erdungsleiter mit der Karosserie oder dem Rahmen des Fahrzeugs. Die Kntaktstelle darf nicht lackiert

sein (sollte die Kontaktstelle lackiert sein, entfernen Sie den Lack der Kontaktstelle, bevor Sie den Leiter befestigen). Wenn

der Erdungsleiter nicht ordnungsgemäß angeschlossen wird, kann dieses Gerät beschädigt werden.

*2 : Attachez solidement le fil de mise à la masse au châssis métallique de la voiture—à un endroit qui n’est pas recouvert de

peinture (s’il est recouvert de peinture, enlevez d’abord la peinture avant d’attacher le fil). L’appareil peut être endommagé si

cela n’est pas fait correctement.

LINE OUT

KS-FX43R/

KS-FX483R/KS-FX480R/

KS-F383R/KS-F380R

REAR

Front speakers

Vordere Lautsprecher

Enceintes avant

Voorspeakers

Signal cord (not supplied with this unit)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

*2 : Bevestig de aardedraad goed met een metalen onderdeel of het chassis van de auto—bevestig op een niet-gelakt gedeelte (indien gelakt,

schuur dan af alvorens de draad te bevestigen). Het toestel kan worden beschadigd indien de aardedraad niet goed is aangesloten.

CD changer / CD-Wechsler / Changeur CD / CD-wisselaar

Only for KS-FX43R/KS-FX483R/KS-FX480R:

Nur für KS-FX43R/KS-FX483R/KS-FX480R:

Seulement pour le KS-FX43R/KS-FX483R/KS-FX480R: Alleen voor KS-FX43R/KS-FX483R/KS-FX480R:

You can connect a JVC CD changer.

• For the connections, refer to the Instructions

supplied with them.

Sie können einen CD-Wechsler von JVC.

• Weitere Informationen über den Anschluß können

Sie der Bedienungscanleitung entnehmen, die dem

jeweiligen Gerät beiliegt.

Vous pouvez connecter un changeur CD JVC.

• Pour les connexions, référez-vous aux modes

d’emploi qui les accompagnent.

Het is mogelijk een JVC CD-wisselaar aan te sluiten.

• Zie de instructies van deze apparaten voor meer informatie

over het tot stand brengen van deze aansluiting.

Connecting cord supplied with your CD changer

Verbindungskabel, das zum Lieferumfang des

CD-Wechsler gehört

Cordon de connexion fourni avec votre changeur CD

Verbindingskabel die met de CD-wisselaar wordt meegeleverd

CAUTION / VORSICHT / PRECAUTION / LET OP!:

JVC CD changer

CD-Wechsler von JVC

Changeur CD JVC

JVC CD-wisselaar

• Before connecting the CD changer, make sure that the unit is turned off.

• Bevor Sie den CD-Wechsler anschließen, vergewissern Sie sich, daß das Gerät ausgeschaltet ist.

• Avant de connecter le changeur CD, s’assurer que l’unité est éteinte.

• Zorg ervoor dat de apparat is uitgeschakeld alvorens u de CD-wisselaar aansluit.

KS-FX43R/KS-FX483R/KS-FX480R

Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volantcontroller /

Verbinden met de stuurwiel-afstandsbediening

Only for KS-FX43R / Nur für KS-FX43R / Seulement pour le KS-FX43R / Alleen voor KS-FX43R

OE remote adapter (not supplied)

OE-Fernbedienungsadapter

If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller.

To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC

IN-CAR ENTERTAINMENT dealer for details.

(nicht im Lieferumfang enthalten)

Adaptateur de télécommande de volant (non fourni)

Adapter voor stuurwiel-afstandsbediening

(niet bijgeleverd)

Steering wheel remote input

Eingang für Lenkradfernbedienung

Entrée de la télécommande de volant

Ingang stuurwiel-afstandsbediening

Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver steuern.

Hierfür ist ein für Ihr Fahrzeug passender OE-Fernbedienungsadapter von JVC (nicht im Lieferumfang

enthalten) erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC Autoradiohändler.

Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant

la télécommande. Pour le faire, un adaptateur de télécommande de volant (non fourni) correspondant à votre

voiture est nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.

Indien uw auto een stuurwiel-afstandsbediening (niet bijgeleverd) heeft, kunt u deze receiver met die afstandsbediening bedienen.

Hiervoor heeft u echter een JVC adapter nodig die geschikt is voor de stuurwiel-afstandsbediening in uw auto. Raadpleeg

uw JVC car audio dealer voor details.

KS-FX43R

Steering wheel remote controller (equipped in the car)

Lenkradfernbedienung (im Fahrzeug installiert)

Télécommande de volant (installée dans la voiture)

Stuurwiel-afstandsbediening (in de auto)

Download from Www.Somanuals.com. All Manuals Search And Download.

Infinity Speaker PS210W User Manual
Invacare Air Compressor Aerosol Compressors User Manual
JVC CD Player KD G801 User Manual
JVC DVD Player HR XVC29UJ User Manual
JVC Projection Television AV 56WP30 User Manual
Kenmore Range 7852 User Manual
Kicker Car Amplifier ZX1502 User Manual
Kingsford Charcoal Grill 10040106 User Manual
KitchenAid Dishwasher 8531778A User Manual
Kodak DVD Player MP6000 User Manual