DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XVC29UJ
For Customer Use:
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
INSTRUCTIONS
information for future reference.
Model No.
Serial No.
LPT0966-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
Use only discs marked with the following.
Failure to heed the following precautions may result in
damage to the unit, Remote or video cassette.
1. DO NOT place the unit —
DVD
(8 cm /12 cm disc)
— in an environment prone to extreme temperatures
or humidity.
— in direct sunlight.
— in a dusty environment.
Video CDs
(8 cm /12 cm disc)
— in an environment where strong magnetic fields are
generated.
— on a surface that is unstable or subject to vibration.
2. DO NOT block the unit’s ventilation openings or
holes.
Audio CDs
(8 cm /12 cm disc)
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
SVCD
(8 cm /12 cm disc)
3. DO NOT place heavy objects on the unit or Remote.
4. DO NOT place anything which might spill on top of
the unit or Remote.
(If water or liquid is allowed to enter this equipment,
fire or electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or
splashing.
6. DO NOT use this equipment in a bathroom or places
with water. Also DO NOT place any containers filled
with water or liquids (such as cosmetics or medicines,
flower vases, potted plants, cups, etc.) on top of this
unit.
7. DO NOT place any naked flame sources, such as
lighted candles, on the apparatus.
8. AVOID violent shocks to the unit during transport.
● Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
● “DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital
Theater Systems, Inc.
● Cassettes marked “VHS” (or “S-VHS”) can be used with this
unit. However, S-VHS recording is not possible with this
model.
● This model is equipped with SQPB (S-VHS QUASI
PLAYBACK) that makes it possible to play back S-VHS
recordings with regular VHS resolution.
MOISTURE CONDENSATION
Moisture in the air will condense on the unit when you
move it from a cold place to a warm place, or under
extremely humid conditions—just as water droplets form
in the surface of a glass filled with cold liquid. Moisture
condensation on the head drum will cause damage to the
tape. In conditions where condensation may occur, keep
the unit turned on for a few hours to let the moisture dry.
● HQ VHS is compatible with existing VHS equipment.
● This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing users only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly
is prohibited.
ATTENTION
To mobile phone users:
Using a mobile phone in the vicinity of the unit may
cause picture vibration on the TV screen or change
the screen to a blue back display.
When the equipment is installed in a cabinet or a shelf,
make sure that it has sufficient space on all sides to allow
for ventilation (10 cm or more on both sides, on top and
at the rear.)
On placing the unit:
Some TVs or other appliances generates strong
magnetic fields. Do not place such appliance on top
of the unit as it may cause picture disturbance.
When discarding batteries, environmental problems must
be considered and the local rules or laws governing the
disposal of these batteries must be followed strictly.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
EN
CONTENTS
DISC INFORMATION
5
EDITING (VCR DECK)
66
About Discs ......................................................... 5
Edit From A Camcorder .....................................66
Edit To Or From Another Video Recorder ..........67
Dubbing (from DVD to VCR) .............................68
INDEX
8
EDITING (DVD DECK)
69
INSTALLING YOUR NEW UNIT
12
Digital Audio Dubbing ......................................69
Basic Connections ............................................. 12
S-VIDEO Connection (DVD deck only) ............. 13
Component Video Connection
REMOTE
70
(DVD deck only) ............................................ 14
Remote Control Functions .................................70
Connecting To A Dolby Digital Decoder or
An Amplifier With A Built-in DTS
INITIAL SETTINGS
15
(DVD deck only) .................................... 71
Plug & Play Set .................................................. 15
Monitor Set (DVD deck) .................................... 16
Language ........................................................... 18
Clock Set ........................................................... 22
Tuner Set ........................................................... 24
SUBSIDIARY SETTINGS
72
Mode Set (VCR deck) .........................................72
Mode Set (DVD deck) ........................................75
Child Lock .........................................................78
Scan Mode Set (DVD deck) ...............................78
OPERATIONS ON VCR DECK
26
Basic Playback .................................................. 26
Playback Features .............................................. 27
Basic Recording ................................................ 31
Recording Features ............................................ 32
Express Timer Programming .............................. 34
Satellite Auto Recording .................................... 39
TROUBLESHOOTING
QUESTIONS AND ANSWERS
SPECIFICATIONS
79
84
85
86
OPERATIONS ON DVD DECK
40
LIST OF TERMS
Basic Playback .................................................. 40
Playback Features .............................................. 41
Using the on-screen bar .................................... 46
Parental Lock .................................................... 56
About MP3 Disc ................................................ 60
MP3 Playback ................................................... 61
About JPEG Disc ............................................... 63
JPEG Playback ................................................... 64
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
DISC INFORMATION
About Discs
Playable Discs
Unplayable Discs
The following types of discs cannot be played using this unit.
Do not attempt to play back any kind of disc that is damaged
(cracked, warped, or repaired with adhesive tape) or discs in
unusual shapes (heart-shaped, octagonal, or other forms). If such
discs are accidentally played back, it may cause noise that can
lead to speaker damage.
● CD-ROM discs (including PHOTO-CD)
● DVD AUDIO discs
● Super Audio CDs (SACD)
You can use the discs with the following logos for playback
only.
● DVD-RW discs recorded in VR format
● DVD-RAM
● Discs which have a region number other than “1”
DVD VIDEO
(8 cm /12 cm disc)
Video CD/Super Video CD
(8 cm /12 cm disc)
Region Number
The world is divided into 6 regions for DVD VIDEO discs. DVD
VIDEO discs are assigned a region number to indicate which
region they may be played back in. A disc cannot be played
back on this unit unless the region number of the disc matches
that of the unit. The region number for this unit is “1”. Only discs
whose region number includes “1” can be played back such as
shown below.
Audio CD
(8 cm /12 cm disc)
CD-DA
files
Examples of DVD VIDEO labels which can be played back
using this unit.
● The following discs also can be played back.
• DVD-R/RW discs recorded in DVD VIDEO format and
finalized
• CD-R/RW discs recorded in Super Video CD, Video CD or
Audio CD format and finalized.
• CD-R/RW discs recorded in MP3 format in accordance with
the “ISO 9660” format. (See page 60 for details.)
• CD-R/RW discs recorded in JPEG format in accordance with
the “ISO 9660” format. (See page 63 for details.)
● Discs other than the above cannot be played back.
● Operation and audio quality of this unit are not guaranteed for
discs that do not conform to the Compact Disc specification
(CD-DA).
Marks of discs in this instruction manual
Allows operation
with a DVD VIDEO
disc.
Allows operation
with a Audio CD
disc.
Allows operation
with a Video CD
disc.
Allows operation
with a SVCD disc.
Before you play back a CD, check for the CD logo and read
the notes on the package to confirm that it conforms to the
Compact Disc specification.
● Depending on the intentions of the author of the software,
recording conditions of DVD discs and Video CD discs may
be restricted. Since this unit plays back discs according to the
intentions of the author of the software as indicated on the
disc, some functions may not operate as commanded.
● When switching from the first layer to the second layer of
double-layered DVD VIDEO discs, the image and sound may
be momentarily distorted. This is not a malfunction.
Allows operation
with a disc
including MP3 files.
Allows operation
with a disc
including JPEG files.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
EN
DISC INFORMATION (cont.)
DVD VIDEO Marks
File Structure of Discs
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of a disc. Check marks indicating the contents and
functions of a disc. Note, however, that in some cases a disc
may not include a mark even for a function it supports.
DVD VIDEO
Typically, DVD VIDEO discs are made up of larger units called
“titles”. Each title has a number (title number) that can be used
to select desired titles. Titles are further divided into units called
“chapters”. Each chapter has a number (chapter number) that
can also be used to select desired chapters. Note that some discs
are not divided into titles and chapters.
Marks related to video
Title 1
Title 2
Mark
Description
Number of subtitles
Chapter 1
Chapter 2
Chapter 3
Chapter 1 Chapter 2
Audio CD/Video CD
Number of angles
Typically, Audio CD discs are divided into separate tracks each
containing one song. Each track is assigned a number. For
example, the third track is Track 3. The same is true for Video
CD discs.
Recorded under the standard 4:3 aspect
ratio
Track 1
Track 2
Track 3
Track 4
NOTE:
Screen includes black bands at top and
bottom of image which has a standard 4:3
aspect ratio (letter box)
Video CD discs that support Playback Control (PBC)
The still image or motion image which follows a menu screen is
called a “scene”. Each scene has a scene number.
For more details, refer to “Locating a desired scene using the
menu of the Video CD with PBC” (੬ pg. 41).
Video playback is in Wide video mode
(16:9) on wide televisions, but in letter
box on televisions with standard 4:3
aspect ratio.
Video playback is in Wide video mode
(16:9) on wide televisions, but pan and
scan is used on televisions with standard
4:3 aspect ratio (either the left or right side
of the image is cut-out).
Marks related to audio
Mark
Description
Number of audio tracks
Dolby Digital mark
Dolby Laboratories has developed a
digital surround system for the home. This
mark indicates that you may enjoy 5.1-
channel audio (front left and right, center,
rear left and right, and a channel for LFE
(Low-Frequency Effects)).
DTS (Digital Theater System)
The DTS decoder on this unit enables you
to enjoy DTS audio with the connected
TV’s speakers by converting 5.1 channel
audio signals into 2 channel signals (DTS
Down Mixing). The decoder also outputs
the original DTS 5.1 channel audio
signals from the DIGITAL AUDIO OUT
connector on this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
Placing a Disc
Care and Handling of Discs
How to handle discs
When handling a disc, do
not touch the surface of the
disc. Since discs are made
of plastic, they are easily
damaged. If a disc gets
1 Open the disc tray.
Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
dirty, dusty, scratched or
warped, the images and
sound will not be picked up
x
correctly, and such a disc may cause the unit to malfunction.
Label side
Do not damage the label side, stick paper to or use any adhesive
on its surface.
Storage
● Pressing the button again closes the disc tray.
● Do not block the disc tray with your hand while it is opening
or closing as this may result in hardware failure.
● Do not place unplayable discs or any object other than a disc
in the disc tray.
● Do not press down strongly on the disc tray or place any
heavy objects on it.
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or other dirt
adhering to a disc, wipe with a soft dry
cloth, moving from the center outwards.
If a disc is difficult to clean, wipe with a
cloth moistened with water. Never use
record cleaners, petrol, alcohol or any
anti-static agents.
2 Place the disc.
Place the disc in the disc tray
with the label side facing up.
● Since disc size changes depending
on the disc to be played back, be
sure to correctly align the disc with
the grooves for its size. If the disc is
not in its groove, it may be
CAUTION
scratched or otherwise damaged.
● To insert an 8 cm disc, place it
according to the inner groove.
Sometimes during playback, noise or images may be
garbled. This is sometimes due to the disc. (It may not be up
to industry standards.)
These symptoms are caused by the discs, not by the
malfunction of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
EN
INDEX
FRONT VIEW
A Power Button (POWER (1)) ੬ pg. 16
B VCR Indicator ੬ pg. 26, 31
C VHS Cassette Loading Slot
D VCR/DVD Button ੬ pg. 26, 31, 40
E Disc Tray
F Stop Button (STOP (8)) ੬ pg. 26, 31, 40
G DVD Indicator ੬ pg. 40
K Video/Audio Input Connectors (VIDEO/AUDIO)
੬ pg. 66
L Remote Sensor
M Front Display Panel ੬ pg. 9
N Record Button (REC (7)) ੬ pg. 31
O Rewind Button (REW (3)) ੬ pg. 26, 27, 42
P Fast Forward Button (FF (5)) ੬ pg. 26, 27, 42
Q Channel Button (CH +/–) ੬ pg. 31
R Progressive Scan Button (PROGRESSIVE SCAN)
੬ pg. 78
H Play Button (PLAY (4)) ੬ pg. 26, 40
I DVD Open/Close Button (OPEN/CLOSE (x))
੬ pg. 40
J VHS Eject Button (EJECT (x)) ੬ pg. 26, 31
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
REAR VIEW
B AC Power Cord ੬ pg. 12
੬ pg. 13
F Digital Audio Output Connector
(DIGITAL AUDIO OUT)* ੬ pg. 69
G Component Video Output Connectors
D Audio/Video Output Connectors (AUDIO/
VIDEO OUTPUT) ੬ pg. 12, 13, 14, 67
E Antenna Input Connector (VHF/UHF IN)
੬ pg. 12
H Audio Output Connectors (AUDIO OUTPUT
(L/R))*
I Remote Pause Connector ੬ pg. 66
J Antenna Output Connector (VHF/UHF OUT)
੬ pg. 12
* These connectors are only for DVD deck.
FRONT DISPLAY PANEL
A Operation Mode Indicators
B Channel/Clock
C VCR Indicator ੬ pg. 32
D Progressive Mode Indicator ੬ pg. 78
E “Timer” Indicator (VCR deck only) ੬ pg. 35
F Satellite Auto Recording Indicator (N) (VCR deck
only) ੬ pg. 39
Auxiliary Input Mode Display (F-1) (VCR deck
only)
Counter Display (VCR deck)
Tape Speed (SP/EP) (VCR deck only)
Multi-information window* (DVD deck)
* The current group/title/track/chapter number(s), time and status
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
EN
INDEX (cont.)
ON-SCREEN DISPLAY (VCR deck)
If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” (੬ pg. 73), various operational
indicators appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” (੬ pg. 46).
A Operation Mode Indicators
B Tape Speed (SP/EP)
D Index number ੬ pg. 28
E Tape Remaining Time Indicator ੬ pg. 33
F Counter Display
G Audio Mode Display ੬ pg. 30
H SAP Indicator ੬ pg. 33
I Stereo Program Indicator ੬ pg. 33
J Day/Clock Display
K Channel Position Number/Auxiliary Input
Indicator (F-1)
L “Cassette Loaded” Mark
C Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. (੬ pg. 28) The
position of “q” in relation to
“B” (beginning) or “E” (end)
shows you where you are
Beginning
End
on the tape.
NOTE:
To recall an indication
A Press ON SCREEN.
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
● All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record
Pause mode, remain on the screen.
B Press ON SCREEN again to clear the display.
● The RECORD/PAUSE indication remains on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
11
M Record Button (REC (7)) ੬ pg. 31
N Reverse Skip/Index Button (SKIP/INDEX (2))
੬ pg. 28, 41
REMOTE
Review Button (
O rt Button ੬ pg. 16
)
TV/VCR Channel Button (TV/VCR CH +/–)
੬ See the left column
P Set Up Button (SET UP) ੬ pg. 16
Q 3D-Phonic Button (3D-PHONIC) ੬ pg. 44
R TV Volume Button (TV VOL+/–) ੬ See the left
column
S DVD Button ੬ pg. 40
T Power Button (POWER (1)) ੬ pg. 16, left
column
U TV Muting Button (MUTE) ੬ See the left column
Audio Monitor Button (A.MONITOR)
੬ pg. 30, 54, 55
V TV/VCR Button ੬ pg. 32, left column
W Date Button (DATE +/–) ੬ pg. 34
Subtitle Button (SUB TITLE) ੬ pg. 52
Angle Button (ANGLE) ੬ pg. 53
X Channel Button (CH +/–) ੬ pg. 31
Y Programming Button (PROG.) ੬ pg. 34
Z Timer Button (TIMER) ੬ pg. 35
a Weekly Button (WEEKLY) ੬ pg. 35
b Program Check Button (PROG. CHECK)
੬ pg. 36
Return Button (RETURN) ੬ pg. 41
c Satellite Auto Recording Button (REC LINK)
੬ pg. 39
d +10 Button
g Pause Button (PAUSE (9)) ੬ pg. 27, 31
h Forward Skip/Index Button (SKIP/INDEX (6))
੬ pg. 28, 41
i ENTER Button ੬ pg. 16
(1), TV/VCR, TV/VCR CH +/–, TV VOL+/–, MUTE) can
also be used to operate a JVC’s TV after setting the TV/VCR/
DVD switch to the left.
j w e Button ੬ pg. 16
k Display Button (DISPLAY) ੬ pg. 33
l Skip Search Button (SKIP SEARCH) ੬ pg. 28
DVD Picture Button (DVD PICTURE) ੬ pg. 45
A VCR Button ੬ pg. 26, 31
B TV/VCR/DVD switch ੬ pg. 16
C Menu Button (MENU) ੬ pg. 41
D SP/EP Button ੬ pg. 31
How To Use
Before use, insert two AA size batteries into the Remote with
the polarity ( and ) matched correctly as indicated on
the battery compartment or on the lid.
Top Menu Button (TOP MENU) ੬ pg. 41
On-Screen Button (ON SCREEN) ੬ pg. 10, 46
F Start Time Button (START +/–) ੬ pg. 34
Repeat Button (REPEAT) ੬ pg. 48, 62 65
Zooming Button (ZOOM) ੬ pg. 43
G Number Keys ੬ pg. 25, 31, 62
H Daily Button (DAILY) ੬ pg. 35
I Reset Button (C.RESET) ੬ pg. 33
Cancel Button (CANCEL) ੬ pg. 37
10 Button
The Remote can operate most of your unit’s functions, as
well as basic functions of TV sets of JVC. (੬ See the left
column)
● Point the Remote toward the remote sensor.
● The maximum operating distance of the remote control is
about 8 m.
NOTE:
If the Remote doesn’t work properly, remove its batteries,
wait a short time, replace the batteries and then try again.
J Play Button (PLAY (4)) ੬ pg. 26, 40
K Rewind Button (REW (3)) ੬ pg. 26, 27, 42
Download from Www.Somanuals.com. All Manuals Search And Download.
12
EN
INSTALLING YOUR NEW UNIT
C Connect the unit to TV.
Basic Connections
The connection method you use depends on the type of
TV you have.
Antenna or Cable
RF Connection
8To connect to a TV with NO AV input connectors —
A Disconnect the TV antenna from the TV.
B Connect the TV antenna cable to the VHF/UHF IN
connector on the rear panel of the unit.
Coaxial cable
Flat feeder
OUT connector on the rear panel of the unit and the
Matching transformer
(not supplied)
AV Connection
8To connect to a TV with AV input connectors —
AUDIO
AC Outlet
OUTPUT
A Connect the antenna, unit and TV as per “RF
Connection”.
VIDEO OUTPUT
AC Power Cord
B Connect an optional audio/video cable between the
AUDIO/VIDEO OUTPUT connectors on the rear
panel of the unit and the TV’s audio/video input
connectors.
● Set your TV to AV mode.
● For switching the TV’s mode, refer to the instruction manual of
your television.
● To obtain high-quality pictures, you can also use the S-VIDEO
connection or Component Video Connection. (DVD deck
only) (੬ pg. 13, 14)
Back of unit
VHF/UHF
IN
D Connect the unit to power source.
Audio/video cable
(not supplied)
VHF/UHF OUT
Plug the end of the AC power cord into an AC outlet. This
unit performs Plug & Play Set automatically. (੬ pg. 15)
● The clock and tuner channels will automatically be set when
the antenna is connected and when the AC power cord is first
connected to an AC outlet. (If “AUTO” and the channel
indicator are displayed on the front display panel before the
unit is powered on, the clock and tuner channels are being set
automatically. Wait for the time to be displayed on the front
display panel before turning on the unit.)
To Audio/video
input connectors
RF cable
(supplied)
To 75 ohm
Terminal
E Set the VCR channel.
TV
The VCR channel is the channel on which you can watch
the picture from the unit on the TV when only using RF
connection.
It’s essential that your unit be properly connected.
With RF connection, set the VCR channel to “3 CH” or
“4 CH”.
● The VCR channel is preset to “3 CH”. Set to “4 CH” if the
Channel 3 is used for broadcasting in your area.
With AV connection, set the VCR channel to “– CH” (off).
To set the VCR channel, perform the following steps:
THESE STEPS MUST BE COMPLETED BEFORE ANY
VIDEO OPERATION CAN BE PERFORMED.
A Check the contents.
Make sure the package contains all of the accessories
listed in “SPECIFICATIONS” on page 85.
Before performing the following steps:
● Make sure there is no cassette inserted in the unit.
● Make sure the unit is turned on, then press VCR/
DVD on the unit or VCR on the Remote so that the
VCR indicator lights up.
B Situate the unit.
Place the unit on a stable, horizontal surface.
A Press POWER (1) to turn off the unit, then press
STOP (8) on the unit for more than 5 seconds. “3 CH”
appears on the front display panel.
B Press CH +/– on the Remote to select “3 CH”, “4 CH”
or “– CH” (off), then press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
8To connect to a TV with S-VIDEO/AUDIO input
S-VIDEO
Connection
(DVD deck only)
A Connect the unit to TV.
A Connect the antenna, unit and TV as per “AV
Connection”. (੬ pg. 12)
B Connect the unit’s S VIDEO OUTPUT (DVD)
connector to the TV’s S-VIDEO input connector.
B Connect the unit to power source.
ATTENTION
Be sure to connect the unit’s VIDEO OUTPUT (DVD/
VCR) connector to the TV’s VIDEO input connector.
Plug the end of the AC power cord into an AC outlet. This
unit performs Plug & Play Set automatically. (੬ pg. 15)
● The clock and tuner channels will automatically be set when
the antenna is connected and when the AC power cord is first
connected to an AC outlet. (If “AUTO” and the channel
indicator are displayed on the front display panel before the
unit is powered on, the clock and tuner channels are being set
automatically. Wait for the time to be displayed on the front
display panel before turning on the unit.)
Antenna or Cable
Coaxial cable
Flat feeder
C Set the VCR channel to off.
Before performing the following steps:
● Make sure there is no cassette inserted in the unit.
● Make sure the unit is turned on, then press VCR/
DVD on the unit or VCR on the Remote so that the
VCR indicator lights up.
Matching transformer
(not supplied)
AUDIO OUTPUT
AC outlet
VIDEO OUTPUT
AC power
cord
A Press POWER (1) to turn off the unit, then press
STOP (8) on the unit for more than 5 seconds. “3 CH”
appears on the front display panel.
S VIDEO OUTPUT
B Press CH +/– on the Remote to select “– CH” (off),
then press ENTER.
NOTES:
● You can obtain high-quality S-VIDEO pictures.
● If your TV is not stereo-capable, use the unit’s AUDIO
OUTPUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction.
● To operate the unit with your TV using the S-VIDEO
connection, set your TV to its AV mode. You can also use the
TV/VCR button on the unit’s Remote to set JVC TV to the AV
mode.
Back of unit
VHF/UHF
IN
S-Video cable
(not supplied)
Audio/video
cable
(not supplied)
VHF/UHF
OUT
● For switching the TV’s mode, refer to the instruction manual of
your television.
● Only DVD picture is output from S-VIDEO OUTPUT
connector. (VCR picture is not output.)
RF cable
(supplied)
To 75 ohm
Terminal
To S-VIDEO input
connector
TV
Download from Www.Somanuals.com. All Manuals Search And Download.
14
EN
INSTALLING YOUR NEW UNIT (cont.)
8To connect to a TV with component video input
Component Video
Connection
A Connect the unit to TV.
A Connect the aerial, unit and TV as per “AV
Connection”. (੬ pg. 12)
B Connect the unit’s COMPONENT VIDEO OUT
connectors to the TV’s component video input
connectors.
(DVD deck only)
ATTENTION
B Connect the unit to power source.
Be sure to connect the unit’s VIDEO OUTPUT (DVD/
VCR) connector to the TV’s VIDEO input connector.
Plug the end of the AC power cord into an AC outlet. This
unit performs Plug & Play Set automatically. (੬ pg. 15)
● The clock and tuner channels will automatically be set when
the antenna is connected and when the AC power cord is first
connected to an AC outlet. (If “AUTO” and the channel
indicator are displayed on the front display panel before the
unit is powered on, the clock and tuner channels are being set
automatically. Wait for the time to be displayed on the front
display panel before turning on the unit.)
Antenna or Cable
Coaxial cable
Flat feeder
C Set the VCR channel to off.
Matching transformer
(not supplied)
Before performing the following steps:
● Make sure there is no cassette inserted in the unit.
● Make sure the unit is turned on, then press VCR/
DVD on the unit or VCR on the Remote so that the
VCR indicator lights up.
AUDIO OUTPUT
AC outlet
VIDEO OUTPUT
COMPONENT VIDEO
OUT
AC power cord
A Press POWER (1) to turn off the unit, then press
STOP (8) on the unit for more than 5 seconds. “3 CH”
appears on the front display panel.
B Press CH +/– on the Remote to select “– CH” (off),
then press ENTER.
NOTES:
● You can obtain high-quality component video pictures.
● If your TV is not stereo-capable, use the unit’s AUDIO
OUTPUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction.
● To operate the unit with your TV using the Component Video
connection, set your TV to its AV mode. You can also use the
TV/VCR button on the unit’s Remote to set JVC TV to the AV
mode.
● For switching the TV’s mode, refer to the instruction manual of
your television.
● By using the component video connection, you can view the
images in the progressive mode. For switching to the
progressive mode, refer to “Scan Mode Set (DVD deck)”
(੬ pg. 78).
Back of unit
VHF/UHF
IN
VHF/UHF
OUT
Audio/Video
cable
(not supplied)
Component
Video cable
(not supplied)
RF cable
(supplied)
To Component Video
Input connector
To 75 ohm
Terminal
TV
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
15
INITIAL SETTINGS
This unit sets the clock and tuner channels automatically
when AC power cord is first connected to an AC outlet.
The antenna cable must be connected for the Plug & Play
setting.
The time and date can be set automatically by the clock
setting data transmitted from one of the regular TV
broadcast channels. We call this TV channel the “host
channel” and it is a PBS channel in your area.
Plug & Play Set
Auto Clock Set/Auto Tuner Set
ATTENTION
● If you use a cable box, Plug&Play will not function; set the
clock and tuner channels separately. (੬ pg. 22 – 25)
● Depending on areas or reception conditions, the unit may
not receive the Auto clock setting data from the PBS
channel. If this function is taking a considerable amount of
time, it may be necessary to perform the Semiauto or
Manual Clock Set procedure.
A Perform Plug & Play setup.
Connect the antenna cable to the unit. (੬ pg. 12) Then
connect the AC power cord to an AC outlet. Do not turn
on the unit.
The clock and tuner channels will be set automatically.
NOTES:
● Auto Clock Set is performed first.
“AUTO” blinks on the front display panel during Auto Clock
Set.
Channel Set, the channel numbers are displayed as they are
● When Plug & Play setting has been complete successfully, the
correct clock time is displayed. If you perform Plug & Play
setting successfully, there is no need to perform “Clock Set”
(੬ pg. 22) and “Tuner Set” (੬ pg. 24). If, however, you want
to add or delete channels, refer to “Manual Channel Set”
(੬ pg. 25).
During Initial Auto Clock Set
“AUTO” blinks.
During Auto Channel Set
The channel numbers are displayed
as they are scanned and set.
Plug&Play Completed
The current time is displayed.
* If an incorrect clock time or “– –:– –” appears on the front display panel, see “What to do if Plug & Play setting failed” below.
INFORMATION
● If “AUTO CLOCK” is set to “ON” (੬ pg. 23), the clock will be adjusted automatically by the host channel every hour (except
11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data. (This automatic clock
adjustment can only be performed when the unit is turned off. The clock will be adjusted just on these hours — on the time
displayed on the front display panel, not on the actual real time.) The default setting of “AUTO CLOCK” is “ON”. (੬ pg. 23)
● If the memory backup fails, because a power outage occurs or because the AC power cord is unplugged, Plug & Play will be
performed when power is restored to the unit.
What to do if Plug & Play setting failed
● If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an
adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform “Semiauto Clock Set” (੬ pg. 23)
or “Manual Clock Set” (੬ pg. 23).
● If “– –:– –” appears on the front display panel, your antenna cable may not be connected to the unit or there may not be a Host
PBS signal available in your area. Ensure that the antenna cable is connected correctly. Then turn on and off the unit; the Plug &
Play setting will be automatically reactivated. If Plug & Play setting is not performed though the antenna cable is connected
correctly, perform “Manual Clock Set” (੬ pg. 23) and “Auto Channel Set” (੬ pg. 24) or “Manual Channel Set” (੬ pg. 25).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
EN
INITIAL SETTINGS (cont.)
A Turn on the unit.
Monitor Set
Press POWER (1).
(DVD deck)
B Select the DVD deck.
You can select the monitor type depending the TV used
when you play back DVD VIDEO discs recorded for
wide-screen TVs.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
C Access the DVD Set Up menu screen.
PICTURE
A Press SET UP.
B Press w e to select
MONITOR TYPE
4:3LB
AUTO
ON
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
“
PICTURE”.
AUDIO
SELECT
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
ENTER
D Select the mode.
Press rt to move the
highlight to “MONITOR
TYPE”, then press ENTER.
PICTURE
MONITOR TYPE
PICTURE SOURCE
4:3LB
AUTO
ON
SCREEN SAVER
FILE TYPE
AUDIO
SELECT
ENTER
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
E Select the mode setting.
Press rt to select the desired setting, then press ENTER.
F Return to the normal screen.
Press SET UP.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
* The default setting is bold in the table below.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen
TV with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect
ratio. There are two styles to display the image, “Pan&Scan”
(PS) and “Letter Box” (LB).
8 MONITOR TYPE
16:9 (Wide television conversion):
Select this when the aspect ratio of your TV is
fixed to 16:9 (wide TV). The unit automatically
adjusts the screen width of the output signal
correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan
The right and left side of the image are
cut off. The image fills the screen.
4:3 LB (Letter Box conversion):
Select this when the aspect ratio of your TV is
4:3 (conventional TV). While viewing a wide
screen picture, the black bars appear on the
top and the bottom of the screen.
Letter Box
Black bands appear at the top and
bottom of the image. The image itself
appears in 16:9 aspect ratio.
4:3 PS (Pan&Scan):
Select this when the aspect ratio of your TV is
4:3 (conventional TV). While viewing a wide
screen picture, the black bars do not appear;
however, the left and right edges of the
pictures will not be shown on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
EN
INITIAL SETTINGS (cont.)
On-screen Language Set (VCR deck)
Language
This VCR deck offers you the choice to view on-screen
messages in 3 different languages.
● Turn on the TV and select the VCR channel (or AV
mode).
A Turn on the unit.
● Slide the TV/VCR/DVD switch to the right.
Press POWER (1).
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Access the Main Menu screen.
Press SET UP.
D Access the Initial Set screen.
Press rt to move the
highlight bar (arrow) to
“INITIAL SET”, then press
ENTER or e.
E Select the language.
Press rt to move the
highlight bar (arrow) to
“LANGUAGE”, then press
ENTER or e repeatedly until
the desired language is
selected.
F Return to the normal screen.
Press SET UP.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
On-screen Language Set (DVD deck)
This DVD deck offers you the choice to view on-screen
messages in 3 different languages. You can change the
language setting manually as required.
A Turn on the unit.
Press POWER (1).
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C Access the DVD Set Up menu screen.
LANGUAGE
A Press SET UP.
B Press w e to select
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
“
LANGUAGE”.
ON SCREEN LANGUAGE ENGLISH
SELECT
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
ENTER
D Select the mode.
Press rt to move the
highlight to “ON SCREEN
LANGUAGE”, then press
ENTER.
LANGUAGE
MENU LANGUAGE
ENGLISH
ENGLISH
OFF
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE ENGLISH
SELECT
ENTER
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
E Select the mode setting.
Press rt to select the desired setting, then press ENTER.
F Return to the normal screen.
Press SET UP.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
EN
INITIAL SETTINGS (cont.)
Menu/Audio/Subtitle Language Set
(DVD deck only)
Some DVD discs contain the DVD menu display, audio,
subtitle in the multiple languages. With these discs, you
can set the default language as you like.
● The procedure shows how to set “MENU LANGUAGE”
on the DVD Set Up menu screen as an example.
A Turn on the unit.
Press POWER (1).
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C Access the DVD Set Up menu screen.
LANGUAGE
A Press SET UP.
B Press w e to select
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
“
LANGUAGE”.
ON SCREEN LANGUAGE ENGLISH
SELECT
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
ENTER
D Select the mode.
Press rt to move the
highlight to “MENU
LANGUAGE”, then press
ENTER.
LANGUAGE
MENU LANGUAGE
ENGLISH
ENGLISH
OFF
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE ENGLISH
SELECT
ENTER
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
E Select the mode setting.
Press rt to select the desired setting, then press ENTER.
● See “Language Code List” (੬ pg. 21).
F Return to the normal screen.
Press SET UP.
NOTE:
When the selected language is not available on the disc, the
disc’s default menu language is played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
Language Code List
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
Afar
IK
Inupiak
RN
RO
RU
RW
SA
SD
SG
SH
SI
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Abkhazian
Afrikaans
Ameharic
Arabic
IN
Indonesian
Icelandic
Hebrew
IS
IW
JI
Yiddish
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
SK
BG
BH
BI
SL
Slovenian
Samoan
Shona
SM
SN
SO
SQ
SR
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
Somali
Kirghiz
Albanian
Serbian
Siswati
Latin
Lingala
SS
ST
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
SU
SV
SW
TA
TE
TG
TH
TI
LV
MG
MI
Bhutani
Greek
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Esperanto
Estonian
Basque
Persian
TK
TL
Finnish
Fiji
TN
TO
TR
TS
Faroese
Frisian
Turkish
Tsonga
Tatar
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
TT
TW
UK
UR
UZ
VI
Twi
Ukrainian
Urdu
Uzbek
Hindi
Vietnamese
Volapuk
Wolof
HR
HU
HY
IA
Croatian
Hungarian
Armenian
Interlingua
Interlingue
VO
WO
XH
YO
ZU
PS
PT
QU
RM
Xhosa
Yoruba
Zulu
IE
Download from Www.Somanuals.com. All Manuals Search And Download.
22
EN
INITIAL SETTINGS (cont.)
Perform clock setting only if the clock has not been set
correctly by the Plug&Play setting.
Clock Set
Preparations
● Turn on the TV and select the VCR channel (or AV
mode).
A Turn on the unit.
● Slide the TV/VCR/DVD switch to the right.
Press POWER (1).
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Access the Main Menu screen.
Press SET UP.
D Access the Initial Set screen.
Press rt to move the
highlight bar (arrow) to
“INITIAL SET”, then press
ENTER or e.
E Access the Clock Set screen.
Press rt to move the
highlight bar (arrow) to
“CLOCK SET”, then press
ENTER or e.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
Semiauto Clock Set
E Complete the Semiauto Clock Set.
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps A to E in
“Preparations” (੬ pg. 22), then go to the following steps.
Press SET UP to return to normal screen.
NOTE:
IMPORTANT
The time set previously will be erased when “AUTO CLOCK”,
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
Turn off the unit after performing Semiauto Clock. “AUTO”
will appear on the front display panel while the clock is
being set. The current clock time will appear automatically
when the clock setting is complete.
A Set “AUTO CLOCK” to “ON”.
Press ENTER or e repeatedly
to move the highlight bar to
“AUTO CLOCK”, then press
rt so that “ON” is selected.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the unit’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, —
— on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
adjusted to 1:00 AM.
B Select the host channel.
Manual Clock Set
You can either select “AUTO” or enter a PBS channel
number.
First follow steps A to E in “Preparations” (੬ pg. 22), then go
Press ENTER or e to move the highlight bar to “HOST
CH”, then press rt repeatedly until “AUTO” or the
desired PBS channel number is selected.
to the following steps.
A Set time, date and year.
NOTE:
Press rt until the desired
time appears, then press
ENTER or e. Set the date and
year in the same way.
● Holding rt changes the time
in 30-minute intervals, or
changes the date in 15-day
intervals.
Some PBS channels do not transmit clock setting data.
C Select the D.S.T. mode.
Press ENTER or e to move the highlight bar to “D.S.T.”,
selected.
AUTO: Select if you want to adjust your VCR’s clock
automatically by the incoming signal from the
host channel. Be sure to select the correct time
zone manually in step D.
B Select D.S.T. mode.
Press ENTER or e to move
the highlight bar to “D.S.T.”,
then press rt to select the
desired setting.
ON:
Adjustment will be made by the built-in clock
itself.
OFF: Select when Daylight Saving Time does not apply
ON:
Adjustment will be
made by the built-in
clock itself.
to you.
D Select the time zone.
OFF: Select when Daylight
Saving Time does not
apply to you.
Press ENTER or e to move the highlight bar to “TIME
ZONE”, then press rt repeatedly until “AUTO” or the
desired time zone is selected. Each time you press the
button, the time zone changes as follows:
C Start clock.
{AUTO{ATLANTIC{EASTERN{CENTRAL{
MOUNTAIN{PACIFIC{ALASKA{HAWAII{
(back to the beginning)
Press SET UP and normal screen appears.
To make corrections any time during the process
Press ENTER or e repeatedly until the item you want to change
blinks, then press rt.
NOTE:
If an incorrect time is displayed by the Plug & Play function, you
may be receiving the clock setting data of a PBS channel from an
adjacent time zone or from an incorrect PBS channel from a
cable TV system. If you selected “AUTO” for the host channel in
step B, be sure to select the correct time zone manually.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
EN
INITIAL SETTINGS (cont.)
Auto Channel Set
Tuner Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
● Turn on the TV and select the VCR channel (or AV
mode).
A Turn on the unit.
● Slide the TV/VCR/DVD switch to the right.
Press POWER (1).
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Access the Main Menu screen.
Press SET UP.
D Access the Tuner Set screen.
Press rt to move the
highlight bar (arrow) to
“TUNER SET”, then press
ENTER or e.
E Perform Auto Channel Set.
Press rt to move the
highlight bar (arrow) to
“AUTO CHANNEL SET”, then
press ENTER or e. You can
automatically set the
receivable channels in your
area in the order of their
frequencies.
● When Auto Channel Set is
complete, “SCAN
COMPLETED” appears on the
TV screen.
● If the scan was unsuccessful,
“SCAN COMPLETED–NO
SIGNAL–” appears on screen.
Check the connections and start
again.
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be
displayed on the right side of “BAND” on the Tuner Set
screen.
F Return to the normal screen.
Press SET UP.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
Manual Channel Set
You can add the channels you want or delete the channels you
do not want manually.
A Turn on the unit.
Press POWER (1).
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Access the Main Menu screen.
Press SET UP.
D Access the Tuner Set screen.
Press rt to move the highlight bar (arrow) to “TUNER
SET”, then press ENTER or e.
E Access the Manual Channel Set screen.
Press rt to move the
highlight bar (arrow) to
“MANUAL CHANNEL SET”,
then press ENTER or e.
F Add or skip the desired channels.
To add channels
A Press the number keys to
input a channel number you
want to add.
B Press ENTER or e to set to
“ADD”.
C Repeat A to B to add other
channels.
To skip channels
A Press rt or the number keys to select a channel
number you want to skip.
B Press ENTER or e to set to “SKIP”.
C Repeat A and B to skip other channels.
G Return to the normal screen.
Press SET UP.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
EN
OPERATIONS ON VCR DECK
A Load a cassette.
Basic Playback
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointed toward the unit.
● Turn on the TV and select the VCR channel (or AV
mode).
● Do not apply too much pressure when inserting.
● If the record safety tab has been removed, playback begins
automatically. Although the DVD deck is selected, the VCR
deck is selected automatically if the DVD deck is in stop
mode.
● Slide the TV/VCR/DVD switch to the right.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Find the program start point.
If the tape is advanced past the start point, press REW
(3). To go forward, press FF (5).
D Start playback.
Press PLAY (4).
E Stop playback.
Press STOP (8). Then press EJECT (x) on the VCR deck
to remove the cassette.
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
*
Compact VHS camcorder recordings can be played on
this unit. Simply place the recorded cassette into a VHS
Cassette Adapter and it can be used just like any full-sized
VHS cassette.
Clean the video heads using a dry cleaning
cassette — ECL-3F — when:
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
** This unit can record on regular VHS and Super VHS
cassettes. However, it will record regular VHS signals
only.
● “USE CLEANING CASSETTE” appears on the screen (only
with “SUPERIMPOSE” set to “ON”). (੬ pg. 73)
• S-VHS recording is not possible with this unit.
●
This unit is equipped with SQPB (S-VHS QUASI
PLAYBACK) that lets you watch tapes recorded in the S-
VHS format and the SP mode with regular VHS
resolution.
NOTE:
The heads get dirty in the following cases:
● in an environment prone to extreme temperature or
humidity
• SQPB does not deliver Super VHS resolution.
● in a dusty environment
● flaw, dirt or mold on video tapes
● continuous usage for a long time
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
Still Picture/Frame-By-Frame
Playback
Playback Features
1 Pause during playback.
● Turn on the TV and select the VCR channel (or AV
mode).
Press PAUSE (9).
● If there is vertical jitter, press CH +/– on the Remote or on the
● Slide the TV/VCR/DVD switch to the right.
unit to correct the picture.
2 Activate frame-by-frame playback.
Press PAUSE (9) to advance a still picture.
CH +/–
Slow Motion
1 Pause during playback.
Press PAUSE (9).
2 Activate slow motion playback.
Press and hold PAUSE (9) for 2 seconds, then release.
Press PAUSE (9) and release again to return to still
picture.
NOTE:
During slow motion playback, some noise may appear on the
TV screen. Press CH + or – on the Remote or on the unit to
eliminate the noises.
Variable Speed Search
During playback, press FF (5) for forward variable
speed search, or REW (3) for reverse variable speed
search.
● The speed changes for each direction by pressing REW (3)
and FF (5) repeatedly.
When pressing FF (5):
(SP): +5x{+7x
(EP): +11x{+21x
When pressing REW (3):
Once REW (3) is pressed, reverse search starts in –1x
normal playback speed. After this process, each press of REW
(3) changes the search speed between –5x and –7x in SP
mode, –11x and –21x in EP mode.
(SP): –1x]–5x{–7x
(EP): –1x]–11x{–21x
To resume normal playback, press PLAY (4).
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of color.
● you cannot hear the sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
EN
OPERATIONS ON VCR DECK (cont.)
Index Search
Your unit automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the unit
is in the Stop mode.
Activate Index Search.
Press INDEX (2) or INDEX (6). “INDEX –1” or
“INDEX 1” is displayed on the TV screen and search
begins in the corresponding direction.
● To access index codes 2 through 9, press INDEX (2) or
INDEX (6) repeatedly until the correct index number is
displayed.
Example:
To locate the beginning of B from the current position, press
INDEX (2) twice.
To locate the beginning of D from the current position, press
INDEX (6) once.
Current position
Index number
● When the specified index code is located, playback begins
automatically.
Instant ReView
Simply by pressing a single button, the unit power comes on,
rewinds, and begins playback of the last timer-recorded
program. If you have several programs recorded, you can easily
access any of them.
Skip Search
During playback, press SKIP SEARCH 1 to 6 times to skip
over unwanted sections.
NOTE:
Before starting, make sure that the unit is off and that the Timer
mode is disengaged.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
Activate Instant ReView.
Press
. The unit power comes on and the unit
To resume normal playback during a Skip Search,
press PLAY (4).
searches for the index code indicating the start of the last
timer-recorded program. Once it’s found, playback
begins automatically.
● To watch the first of the 3 programs, press
three
times. The unit searches and begins playback automatically.
You can access a program as far as 9 index codes away from
the current tape position.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
29
Next Function Memory
x
The Next Function Memory “tells” the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a- For Automatic Start Of Playback
Press REW (3), then press PLAY (4) within
2 seconds.
b- For Automatic Power Off
Press REW (3), then press POWER (1) within
2 seconds.
c- For Automatic Timer Standby
Press REW (3), then press TIMER within 2 seconds.
d- For Automatic Cassette Ejection After Tape Rewind
Press REW (3), then press EJECT (x) within 2
seconds.
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
1 Start playback.
Press PLAY (4).
2 Activate Repeat Playback.
Press PLAY (4) and hold for over 5 seconds, then
release.
● The Play indicator ($) on the front display panel blinks
slowly.
● After playing back a tape 100 times, the unit stops
automatically.
3 Stop Repeat Playback.
Press STOP (8) at any time.
● Pressing PLAY (4), REW (3), FF (5) or PAUSE (9) also
stops Repeat Playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
EN
OPERATIONS ON VCR DECK (cont.)
Manual Tracking
CH +/–
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually
by pressing the CH buttons.
1 Override automatic tracking.
During playback, press SP/EP on the Remote.
2 Adjust the tracking manually.
Press CH + or – on the Remote or on the unit.
● Press SP/EP again to return to automatic tracking.
NOTE:
When a new tape is inserted, the unit enters the automatic
tracking mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing A.MONITOR changes the soundtrack as follows:
● You can also select the soundtrack on the Function Set screen.
(੬ pg. 74)
TRACK
USE
On-Screen Display
H I-F I
Hi-Fi sound is played back
Sound on the left Hi-Fi channel is
played back
H I-F I L
Sound on the right Hi-Fi channel is
played back
H I-F I R
NORM
Sound on the normal track is played
back
Both sounds on the Hi-Fi track and
normal track are mixed and played
back
NORM
H I-F I
NOTES:
● “HIFI” should normally be selected. In this mode, Hi-Fi stereo
tapes are played back in stereo, and the normal audio track is
played back automatically for tapes with only normal audio.
● “SUPERIMPOSE” must be set to “ON” or the on-screen
displays will not appear. (੬ pg. 73)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
A Load a cassette.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
Basic Recording
Insert a cassette with the record safety tab intact.
● Turn on the TV and select the VCR channel (or AV
mode).
B Select the VCR deck.
● Slide the TV/VCR/DVD switch to the right.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Choose a program.
Press CH +/– or the number keys to select the channel
you wish to record.
D Set the tape speed.
Press SP/EP. The current setting appears on the front
display panel or TV screen. Press SP/EP again to change
the setting while the tape speed is displayed on the TV
screen.
E Start recording.
Press and hold REC (7) and press PLAY (4) on the
Remote, or press REC (7) on the unit.
F Pause/Resume recording.
Press PAUSE (9). Press PLAY (4) to resume recording.
● You can select channel during the Record Pause mode.
G Stop recording.
Press STOP (8). Then press EJECT (x) on the VCR deck
to remove the cassette.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (੬ pg. 31, 32, 34), the
recording will resume automatically when power is restored
to the unit unless the unit’s memory backup has expired.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
EN
OPERATIONS ON VCR DECK (cont.)
Record One Program While Watching
Another
Recording Features
If your unit is connected to the TV via the AV connection,
press TV/VCR. The VCR indicator on the front display
panel and the TV broadcast being recorded disappear.
Once recording is in progress, all you need to do is to set
the channel controls on the TV for the station you wish to
view.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
● The program selected with the TV’s channel controls appears
on the TV screen, while the one selected with the unit’s CH
buttons is recorded on the tape.
NOTE:
You can also use the DVD deck in the following cases. Before
use, be sure to turn on the unit and select the DVD deck.
● During recording
● During timer recording
● During timer standby mode
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1 Start recording.
Press REC (7) on the unit.
2 Engage the ITR mode.
Press REC (7) again. “⅜” blinks and “0:30” appears on
the front display panel.
3 Set the recording duration.
If you want to record for more than 30 minutes, press
REC (7) to extend the time. Each press extends recording
time by 30 minutes.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
NOTES:
● You can only perform ITR using the REC (7) button on the
unit’s front panel.
● Still picture playback stops automatically after 5 minutes to
protect the heads.
● When the end of the tape is reached during timer recording,
the unit stops and “⅜” and “$” blink on the front display
panel.
● When the end of the tape is reached during timer recording or
Instant Timer Recording, the unit is turned off and “⅜” and
“$” blink on the front display panel.
Record safety tab
● During Instant Timer Recording, any other timer programmed
recording won’t start even if their start time has come. In such
a case, the timer programmed recording starts (if the end time
of the timer programmed recording is set after the end of
Instant Timer Recording) after the Instant Timer Recording
finishes.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
Elapsed Recording Time Indication
1 Set the counter display.
Press DISPLAY until a counter reading appears on the
front display panel.
2 Reset the counter.
Press C.RESET before starting recording or playback.
● The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press DISPLAY until the time remaining on the tape
appears.
● The front display panel shows the tape remaining time with “:”
blinking.
● By pressing the DISPLAY button, you can change display to
show the channel position*, clock time, counter reading or
tape remaining time.
* Channel position is not displayed during playback.
NOTES:
● When you press ON SCREEN, the on-screen display appears
on the TV screen for 5 seconds, then the displays other than
the counter disappears. To clear the counter display, press ON
SCREEN.
● Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
“– –:– –” may sometimes appear with “:” blinking, or the
display may blink on occasion.
Second Audio Recording
This unit’s built-in MTS decoder enables reception of
Multichannel TV Sound broadcast. To record a SAP program
received, set “2ND AUDIO RECORD” to “ON”. (੬ pg. 74)
NOTE:
When the channel is changed on the unit;
● The “STEREO” indicator appears on the screen for about
5 seconds if the program is a stereo broadcast.
● The “SAP” indicator appears on the screen for about 5 seconds
if the program is a SAP broadcast.
● Both indicators appear when a stereo program is accompanied
by SAP sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
EN
OPERATIONS ON VCR DECK (cont.)
Example: To timer-record the program from 8:00 PM to
10:00 PM on 24th December, on channel 12.
Express Timer
Programming
A Select the VCR deck.
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the unit
Before performing Express Timer Programming:
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
On the Remote
Press VCR so that the VCR indicator lights up.
● Turn on the TV and select the VCR channel (or AV mode).
● Slide the TV/VCR/DVD switch to the right.
B Access the Program screen.
Press PROG.. (If you’re just
starting out, “PROGRAM 1”
appears.)
C Enter the program start time.
Press START +/– to enter the
time you want recording to
start.
● Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move
1 minute at a time.
D Enter the program stop time.
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E Enter the program date.
Press DATE +/–.
● The current date appears on the TV screen. The date you enter
appears in its place.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
35
NOTES:
F Enter the channel position.
● You can program this unit to timer-record as many as 8
programs. If you try to program the unit to record a ninth,
“PROGRAM FULL” appears on the TV screen. To record the
extra program, you must first cancel any unnecessary
programs. (੬ pg. 37)
date.
Press CH +/–.
G Set the tape speed.
Press SP/EP.
Cable Box or DBS Receiver Users
To timer-record a satellite broadcast using Express Timer
Programming:
A Perform steps A – I. Enter “F-1” for the channel position
in step F.
B Set the DBS receiver to the appropriate channel before
the selected program begins.
C Leave the DBS receiver’s power on.
Press PROG. or ENTER. “PROGRAM COMPLETED”
appears on the TV screen for about 5 seconds, then the
normal screen appears. If “PROGRAM NOT
COMPLETED PROGRAM OVERLAP” appears on the TV
screen, see page 38.
● Repeat steps B – H for each additional program.
I Engage the unit’s timer mode.
Press TIMER. The unit turns off automatically and “#”
appears on the front display panel.
● To disengage the timer mode, press TIMER again.
To Timer-Record Weekly Or Daily Serials:
— anytime during steps C through G, press WEEKLY (number
key “9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
EN
OPERATIONS ON VCR DECK (cont.)
Check, cancel and change programs
A Disengage the timer mode.
Press TIMER, then press POWER (1).
B Access the Program Check screen.
Press PROG. CHECK.
C Access the Program screen.
Press PROG. CHECK again
to check more information.
Each time you press
PROG. CHECK, the next
program’s information
appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
37
To cancel or change a program
D Cancel or change a program.
Press CANCEL to cancel a program. To change program
settings, press the appropriate button: START +/–,
STOP +/–, DATE +/–, CH +/–, DAILY (number key “8”),
WEEKLY (number key “9”) and/or SP/EP.
E Return to the normal screen.
Press PROG. CHECK as many times as necessary. If there
are still some programs remaining, go on to step F.
F Return to the timer mode.
Press TIMER.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
EN
OPERATIONS ON VCR DECK (cont.)
When programs overlap each other
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, you have another program overlapping the program
you have just made.
The Program Check screen appears and conflicting programs
will start blinking.
Example: Program 1 (you have just made) and Program
4 overlap each other.
A Confirm the overlapping programs.
Overlapping programs blink on the TV screen.
B Select the program to modify.
Press rt, then press ENTER or e.
● You can only select one of the overlapping programs.
NOTE:
If you do not mind this overlap, press PROG. to finish the timer
program setting. The program with the lower program number
will be recorded and the other one will not be recorded
correctly. If no changes are made for approximately 1 minute,
the unit will return to the normal screen.
C Cancel or change program setting.
To cancel a program, press CANCEL when the Program
screen you do not want is shown. “PROGRAM
COMPLETED” appears on the TV screen for about
5 seconds, then the normal screen appears.
ATTENTION
If there is a conflict in the timer schedule and one
program overlaps with another, only the parts shown
below in gray will be recorded.
To change a program, press the appropriate button:
START +/–, STOP +/–, DATE +/–, CH +/–, DAILY
(number key “8”), WEEKLY (number key “9”) and/or SP/
EP when the Program screen on which you want to make
changes is shown, then press ENTER. “PROGRAM
COMPLETED” appears on the TV screen for about
5 seconds, then the normal screen appears.
Pattern 1: The program with the lower program number
will be recorded.
Program 1
Program 2
CH10
CH40
Not recorded
NOTE:
If the overlap is not yet solved, or another overlap occurs with
the timer program setting after making the last correction on a
program, the conflicting programs will be shown on the Program
Check screen again. Repeat the above steps again until the
overlap is solved.
Pattern 2: The program starting earlier will be recorded.
Program 1
Program 2
CH10
CH40
Not recorded
Pattern 3: The program starting earlier will be recorded,
followed by the remaining portion of the other
program.
Program 1
CH10
Program 2
CH40
Not recorded
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
39
ATTENTION
● Be sure not to turn on the DBS receiver before the program
is executed; otherwise, the unit will start recording when
the DBS receiver’s power is turned on.
Satellite Auto
Recording
● If you have connected another appliance other than a DBS
receiver to the AUDIO/VIDEO input (F-1) connector, be
sure not to engage the Satellite Auto Recording mode;
otherwise, the unit will start recording when the connected
appliance’s power is turned on.
● Satellite Auto Recording and timer-recording cannot be
done at the same time.
This function allows you to automatically record a
satellite program which is timer-programmed on your
external DBS receiver. Connect a DBS receiver to the
unit’s AUDIO/VIDEO input (F-1) connector and program
the timer on the DBS receiver. The unit starts or stops
recording by the signals input from the DBS receiver.
After recording, the unit’s power shuts off automatically.
● You can also connect the cable box if it has a timer.
Before performing the following steps:
● Make sure the DBS receiver is connected to the unit’s
AUDIO/VIDEO input (F-1) connector.
● Program the timer on the DBS receiver.
● Insert a cassette with the safety tab in place.
● Slide the TV/VCR/DVD switch to the right.
A Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
B Set the tape speed.
Press SP/EP.
C Engage the Satellite Auto Recording mode.
Press and hold REC LINK for about 2 seconds. The “N”
and “#” indicators light up and the unit turns off
automatically.
NOTES:
● Operation on the DVD deck are not possible when the Automatic Satellite Program Recording mode is engaged, or timer recording
is in progress.
● To disengage the Satellite Auto Recording mode, press REC LINK. The “N” indicator goes off.
● If the unit’s power is off, it is not possible to engage the Satellite Auto Recording mode.
● In step C, if the “N” indicator does not light but instead blinks quickly even though your DBS receiver’s power is off, Satellite Auto
Recording will not work properly with that DBS receiver*. If this is the case, perform “Express Timer Programming” (੬ pg. 34) to
timer-record a satellite program.
* Some DBS receivers output signals even if the power is off. Satellite Auto Recording is not possible with those DBS receivers.
● The “N” indicator blinks while Satellite Auto Recording is in progress.
● For timer programming of the DBS receiver, refer to the instruction manual of the DBS receiver.
● Satellite Auto Recording is not possible if your DBS receiver does not have a timer.
● Pressing the unit’s POWER (1) button while Satellite Auto Recording is in progress turns off the unit’s power and disengages the
Satellite Auto Recording mode.
● If there are more than one satellite programs you wish to record with Satellite Auto Recording, it is not possible to set different tape
speeds for each program.
● Depending on the type of DBS receiver, the unit may not record a slight portion of the beginning of the program or may record
slightly longer than the actual length of the program.
● If you engage the Satellite Auto Recording mode when the DBS receiver’s power is on, the unit will not start Satellite Auto Recording
even though the “N” and “#” indicators blink. When the DBS receiver shuts off once and is turned back on again, the unit starts
recording.
● You can also record a program from your cable system in the same way if the system has a timer.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
EN
OPERATIONS ON DVD DECK
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
● Pressing PLAY (4) also close the disc tray.
● Playback begins automatically if the auto-playback DVD disc
is loaded. Although the VCR deck is selected, the DVD deck is
selected automatically if the VCR deck is in stop mode.
● "no dc" appears on the front display panel when there is no
disc present on the disc tray.
Basic Playback
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C Start playback.
Press PLAY (4).
Example: DVD VIDEO
Title number
Chapter number
Elapsed time
● You can switch the display on the front display panel between
the title number/chapter number and the elapsed time by
pressing DISPLAY.
● It may take a few seconds to start playback.
● If you load a DVD disc whose region code does not match the
DVD deck, “REGION CODE ERROR!” appears on the TV
the menu display may appear on the TV screen after starting
playback. In this case, select an item which you want to play
back from the menu. Otherwise, the playback cannot go
forward. Refer to “Locating a desired scene using the menu of
the Video CD with PBC” (੬ pg. 41) or “Locating a desired
scene using the DVD menu” (੬ pg. 41).
D Pause playback.
ATTENTION
the Automatic Satellite Recording standby and recording
mode.
Press PAUSE (9).
● To resume normal playback, press PLAY (4).
● You can use the DVD deck when the VCR deck is in the
timer standby mode.
To play back a MP3/JPEG disc, see pages 60 – 65.
Press STOP (8). Press OPEN/CLOSE (x) on the DVD
deck to open the disc tray, then remove the disc.
● Pressing PLAY (4) resume playback from the position where
you stop playback. For details, see “Resume Function” on
page 43.
A Load the disc.
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
NOTE:
● The unit’s power comes on automatically.
B Place the disc in the disc tray.
When you press OPEN/CLOSE (x) while the unit is turned off,
the unit’s power comes on and the disc tray opens
automatically.
● For details, refer to “Placing a Disc” (੬ pg. 7).
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
41
Locating a desired scene using the
DVD menu
Playback Features
● Turn on the TV and select the VCR channel (or AV
mode).
DVD VIDEO discs may have two types of the menus; top menu
and disc menu.
● Slide the TV/VCR/DVD switch to the right.
Top menu
DVD discs generally have their own menus which show the disc
contents. These menus contain various items such as titles of a
movie, names of songs, or artist information. You can locate a
desired scene by using the top menu displayed on the TV screen.
Press TOP MENU to access the top menu.
Playback Control (PBC) Function
— Locating a desired scene using the
menu of the Video CD with PBC
Disc menu
DVD discs have the disc menu to select subtitle and audio
language etc. for each title.
Press MENU to access the disc menu.
1 Access the DVD menu.
Some Video CD discs supports the PBC function. PBC is an
abbreviation of “PlayBack Control”. A Video CD disc recorded
with PBC has its own menus, such as a list of the songs of the
disc. You can locate a specific scene by using the menu.
Press TOP MENU or MENU.
1 Access the PBC menu.
In stop mode
Press PLAY (4).
● Depending on a disc, PBC
menu may automatically
appear on the TV screen by
simply loading a disc on the
unit. “Pbc” appears on the
Example:
2 Start playback.
Press rt w e to select a desired item, then press
ENTER.
● It may be possible to select the desired item using the number
keys depending on the disc.
front display panel.
Example:
NOTES:
● When “X” appears on the TV screen in step 1, the disc does
not have a top menu or disc menu.
● Top menu or disc menu may not appear depending on the
discs even if it is recorded in DVD VIDEO format and
finalized. In that case, press STOP (8) to display the total
number of titles on a disc, then press the appropriate number
keys to select the desired title.
2 Start playback.
Press the appropriate number keys.
● The unit starts playback of the selected item.
● When “NEXT” or “PREVIOUS” appears on the TV screen:
Pressing SKIP (6) advances to the next page.
Pressing SKIP (2) returns to the previous page.
● You can return to the menu by pressing RETURN.
● The method of the operation is different depending on the
disc.
NOTES:
● If you want to playback a PBC-compatible Video CD disc
without activating the PBC function, start playback by using
the number keys instead of the PLAY (4) button.
● To activate the PBC function when a PBC-compatible Video
CD disc is being played back without the PBC function, press
TOP MENU or MENU, or press STOP (8) (press twice when
“RESUME” is set to “ON”) then press PLAY (4).
Download from Www.Somanuals.com. All Manuals Search And Download.
42
EN
OPERATIONS ON DVD DECK (cont.)
Locating the start point of the item or
skip the item
Press SKIP (2) or SKIP (6) during playback.
Example:
To locate the beginning of item B from the current position,
press SKIP (2) twice.
To locate the beginning of item D from the current position,
press SKIP (6) once.
Current position
The number you press the
button
● When the specified item is located, playback begins
automatically.
NOTE:
When you press SKIP (2) or SKIP (6), the counter display
may appear instead of title number/chapter number depending
on the discs.
Variable Speed Search
During playback, press FF (5) for forward variable
speed search, or REW (3) for reverse variable speed
search.
● The more times you press, the faster the playback picture
moves.
● To resume normal playback, press PLAY (4).
OR
During playback, press and hold SKIP (6) for forward
search, or press and hold SKIP (2) for reverse search.
● While you press and hold the button, the image is played back
at 5x speed.
● To resume normal playback, release SKIP (2) or SKIP (6).
NOTES:
● Actual speed may be different from that displayed on the TV
screen depending on the discs.
● Playback sound is not heard in any variable speed search
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
43
NOTES:
Still Picture/Frame-By-Frame
Playback
● Resume Function does not work on the Audio CD. It also may
not work depending on the discs.
● If you stop the playback of a disc for which an resume point
has already been memorized, the memory will be updated
with the new resume point.
● When the unit memorizes a resume point, it also remembers
audio language, subtitle and angle settings.
● This function may not works for some Video CD or SVCD.
1 Pause during playback.
Press PAUSE (9).
2 Activate frame-by-frame playback.
Zooming
Press PAUSE (9) to advance a still picture.
● To resume normal playback, press PLAY (4).
Press ZOOM during playback or while paused.
● Each press of ZOOM changes the magnification in the
following steps:
Slow Motion
ZOOM OFF ] ZOOM 1 ] ZOOM 2 ] ZOOM 3]
ZOOM 4 ] ZOOM 5 ] ZOOM 6 ] (Back to the beginning)
● When a 16:9 aspect picture source is displayed on a 4:3
aspect TV (conventional TV) in Letter Box conversion mode,
the margins in black shown on top and bottom of the TV
screen will be cropped and both left and right side parts of the
picture will also be cropped. You may not move up or down
the zoomed-in scene depending on the zooming
magnification.
During playback, press PAUSE (9), then press REW
(3) for reverse slow motion playback, or FF (5) for
forward slow motion playback.
● Each press of FF (5) changes the playback speed as follows:
1/32]1/16]1/8]1/4]1/2
● Each press of REW (3) changes the playback speed as
follows (only for DVD VIDEO discs):
–1/32]–1/16]–1/8]–1/4]–1/2
● To resume normal playback, press PLAY (4).
● While zoomed, the picture may look coarse or distorted.
Current magnification
NOTES:
● Reverse slow motion playback is possible only with the DVD
VIDEO discs.
● This function may not works for some Video CD or SVCD.
Resume Function
Zoomed-in area
It is possible to memorize the position where you stop playback
and resume playback from that position.
● Be sure to set “RESUME” to “ON”. (੬ pg. 78)
1 Memorize the resume point.
Press STOP (8) during playback.
Press rt w e to move the zoomed-in scene.
● “rESuM” appears on the front display panel.
● The unit enters Resume Stop mode and memorize the position
where you stop playback as the resume point.
● To clear the resume point:
• Press STOP (8) in stop mode.
• Press POWER (1) to turn off the unit.
• Eject the disc.
• Set “RESUME” to “OFF”. (੬ pg. 78)
2 Resume playback.
Press PLAY (4). The unit start playback from the resume
point.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
EN
OPERATIONS ON DVD DECK (cont.)
● Each time you press 3D-PHONIC, the setting changes as
follows:
OFF]ACTION]DRAMA]THEATER](Back to the
beginning)
OFF:
ACTION:
No effect
Suitable for action movies and sports
programs in which sounds dynamically
move.
DRAMA:
Provides the natural and warm sound. You
can enjoy movies in a relaxed mood.
You can enjoy sound effects like in a major
theater.
THEATER:
● The selection menu disappears automatically if you do not
change the selection for 5 seconds.
NOTES:
● The 3D Phonic function works correctly only when playing
back a DVD VIDEO disc recorded in the multi channel Digital
format. With other sources, you cannot get any effect if you
activate 3D Phonic function.
● When playing back a DVD VIDEO disc recorded with the
Dolby Digital that does not contain the rear signal, you cannot
get a correct 3D Phonic sound even if you activate 3D Phonic
function.
● The 3D Phonic function does not affect the Digital bitstream
signal from the DIGITAL AUDIO OUT connector.
● When 3D Phonic function is activated, Down Mix and D.
Range Compression functions are disabled. (੬ pg. 77)
3D Phonic
3D Phonic function allows you to get a simulated surround
effect from your stereo system. You can enjoy the vertical
surround sound with your 2-channel stereo system.
1 Access the selection menu.
Press 3D-PHONIC during playback.
● The current setting appears on the right bottom corner of the
TV screen.
2 Select the mode.
Press 3D-PHONIC
repeatedly.
3D PHONIC DRAMA
Selected mode
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
45
4 Select the parameter.
VFP function
— Adjusting the picture quality
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
● Adjust gradually and confirm picture appearance results are as
preferred.
GAMMA:
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
(–3 to +3)
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
BRIGHTNESS: Controls screen brightness.
(–8 to +8)
NOTE:
Before you start operation;
CONTRAST:
(–7 to +7)
Controls screen contrast.
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
SATURATION: Controls screen color depth.
(–7 to +7)
1 Access the VFP setting menu.
TINT:
Controls screen tint.
(–7 to +7)
Press DVD PICTURE during
NORMAL
playback.
SHARPNESS: Controls screen sharpness.
(–8 to +8)
GAMMA
0
0
0
0
0
● The current setting appears on
BRIGHTNESS
CONTRAST
SATURATION
TINT
the TV screen.
● VFP menu disappears and the following pop-up window
appears on the TV screen.
+
SHARPNESS
3
2 Select the VFP mode.
GAMMA
0
Press w e repeatedly.
GAMMA
0
● Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
● The selection menu disappears automatically if you do not
change the selection for 10 seconds.
NORMAL:
CINEMA:
Select this normally.
Suitable for movie.
Press rt repeatedly to change the setting, then press
ENTER.
USER 1/USER 2: You can adjust parameters that affect
picture appearance and store settings. Go
to step 3.
● The current VFP settings appear again.
6 Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
NOTE:
You cannot adjust the parameters of “NORMAL” and
“CINEMA”.
To return to the normal screen
Press DVD PICTURE.
To adjust picture appearance manually
To activate your setting
Press DVD PICTURE, then press w e repeatedly to select
“USER 1” or “USER 2” that you have changed the
parameters.
3 Access USER menu.
Press w e repeatedly to
USER 1
select “USER 1” or “USER 2”.
GAMMA
0
0
0
0
0
BRIGHTNESS
CONTRAST
SATURATION
TINT
+
SHARPNESS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
46
EN
OPERATIONS ON DVD DECK (cont.)
How to Access the on-screen bar
Press ON SCREEN twice whenever a disc is loaded.
Example: During DVD VIDEO playback
Using the on-
screen bar
Example: During Video CD playback
You can check disc information while the disc is loaded and you
can use some functions using the on-screen bar. The on-screen
bar allows you the various playback operations.
Contents of the on-screen bar during playback
DVD
Video CD
A Disc type
B Current transfer rate (Megabits per second)
C Current title (for DVD)
D Current chapter number (for DVD) or track number
(for other type of discs)
E Time information (੬ pg. 47)
F Playback status
: appears during playback.
/
/
: appears during fast forward/reverse.
: appears during playback in forward slow-
motion/reverse slow-motion.
: appears when paused.
: appears when stopped.
G Select this to change time information. (See 5 in the
H Select this for Repeat Playback. (੬ pg. 48)
J Select this for chapter search function. (੬ pg. 51)
K Select this to change audio language or channel.
(੬ pg. 54, 55)
L Select this to change subtitle language. (੬ pg. 52)
M Select this to change view angle. (੬ pg. 53)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
47
Basic operation on the on-screen bar
Example: When selecting the Repeat mode of DVD
During playback
Change the time information
You can change the time information in the on-screen bar on the
TV screen and the front display panel of the unit.
A Access the on-screen bar.
During playback or while stopped
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
● The currently selected item is highlighted.
A Access the on-screen bar.
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
B Select menu item.
B Select menu item.
Press w e to move the highlight to
ENTER.
, then press
Press w e to move the highlight to
, then press
● Each time you press ENTER, the time information changes as
follows;
ENTER. The pop-up window appears under the selected
item.
● The current setting appears.
Example: During DVD playback
(Back to the beginning)
TIME:
Elapsed playing time of current chapter/track
Remaining time of current chapter/track
Elapsed time of title/disc
REM:
C Select the option.
TOTAL:
T. REM:
Remaining time of title/disc
Press rt to select the desired option, then press ENTER.
● Each time you press rt, the options change.
To clear the on-screen bar
Press ON SCREEN.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
NOTE:
While a DVD is stopped, “– : – – : – –” appears in the time
information display.
See the corresponding pages for details on each function.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
EN
OPERATIONS ON DVD DECK (cont.)
C Select the repeat mode.
Press rt repeatedly to select the Repeat mode, then
press ENTER.
● The mode changes as follows:
DVD VIDEO
CHAPTER]TITLE]A-B]OFF](Back to the beginning)
CHAPTER:
TITLE:
A-B:
The current chapter is played
back repeatedly.
The current title is played back
repeatedly.
The desired part is played back
repeatedly. (੬ pg. 49)
Each title and chapter is played
back once.
OFF:
Video CD/SVCD/CD
TRACK]ALL]A-B]OFF](Back to the beginning)
The current track is played back
repeatedly.
TRACK:
ALL:
All tracks are played back
repeatedly.
The desired part is played back
repeatedly. (੬ pg. 49)
A-B:
Each track is played back once.
OFF:
To clear the on-screen bar
Press ON SCREEN.
To cancel Repeat Playback
Repeat from step A, select “OFF” in step C, then press
ENTER.
Repeat Playback
When using the REPEAT button:
A Access the repeat mode.
You can repeat playback as you like according to the type of
disc.
Press REPEAT during playback of the item you want to
repeat.
DVD VIDEO:
Audio CD:
during playback
● Repeat mode is displayed on the TV.
during playback or in stop mode
Video CD/SVCD: in stop mode or during playback with PBC
deactivated
B Select the repeat mode.
When using the on-screen bar
Press REPEAT repeatedly to select the desired repeat
mode.
● To stop Repeat Playback, press STOP (8).
● To cancel Repeat Playback, press REPEAT repeatedly until
“OFF” appears on the TV screen.
● The pop-up window disappears if no operation is done for
about 5 seconds.
A Access the on-screen bar.
the TV screen.
Press ON SCREEN twice. The on-screen bar appears on
B Select menu item.
NOTES:
● Repeat Playback is not possible with a Video CD and SVCD
with PBC function.
Press w e to move the highlight to
ENTER.
, then press
● Repeat Playback may not work properly depending on the
type of disc being used.
● You cannot select A-B Repeat Playback by pressing REPEAT.
● The following pop-up window appears under the selected
item.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
49
A-B Repeat Playback
You can repeat the desired part.
A Access the on-screen bar.
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
B Select menu item.
Press w e to move the highlight to
ENTER.
, then press
● The following pop-up window appears under the selected
item.
C Select the repeat mode.
Press rt repeatedly to select “A-B”.
D Select the start point.
Press ENTER at the beginning of the part you want to
repeat (point A).
● The following display appears in the on-screen bar.
E Select the end point
(point B).
● A-B Repeat Playback starts. The selected part of the disc
(between point A and B) is played repeatedly.
To cancel A-B Repeat Playback
Repeat from step A, select “OFF” in step C, then press
ENTER.
● You can also cancel Repeat Playback by pressing SKIP (2)
or SKIP (6).
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● A-B Repeat Playback may not work properly depending on the
type of disc being used.
● The subtitles recorded around A-B point may not appear.
● The end of the item will be set as “B” point if the end of the
item reached before you set the “B” point.
● When playing back a DVD, A-B Repeat Playback is possible
only within the same title.
● “A-B” cannot be selected while stopped.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
EN
OPERATIONS ON DVD DECK (cont.)
Time Search
You can play back a disc from the desired point by specifying
the elapsed time from the beginning of the current title (for DVD
VIDEO) or the disc (for Audio CD/Video CD) using the Time
Search.
When a PBC-compatible Video CD is played back, be sure to
inactivate PBC function before you perform Time search by
pressing the number keys instead of the PLAY (4) button when
you start playback.
A Access the on-screen bar.
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
B Select menu item.
Press w e to move the highlight to
ENTER.
, then press
● The following pop-up window appears under the selected
item.
C Select the time.
Press the number keys (0-9) to enter the time, then press
ENTER.
Example:
To play back from a point 2 (hours): 34 (minutes): 08 (seconds)
elapsed
TIME _ : _ _ : _ _
TIME 2 : 3 _ : _ _
TIME 2 : 3 4 : 0 _
TIME 2 : _ _ : _ _
Press 2
Press 3
TIME 2 : 3 4 : _ _
Press 0
Press 4
Press 8
TIME 2 :3 4 :0 8
If you have specified a wrong selection,
Press w repeatedly until the wrong number is erased,
then press number keys to enter the correct numbers.
● The unit starts playback from the specified time.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● When “X” is displayed on the TV screen in step C, you have
selected a point that excesses the recording time of the disc.
● Some DVD VIDEO discs do not contain time information, and
it is no possible to use the Time Search function. In such a
case, “X” is displayed on the TV screen as well.
● Time Search does not work while you play back the Video CD
or SVCD with the PBC Function.
Reactivate the Playback Control (PBC) Function
You can reactivate the PBC function when you play back a PBC-
compatible Video CD disc without PBC function.
● Press TOP MENU during playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
51
Chapter Search
You can start playback the desired chapter using the on-screen
bar.
A Access the on-screen bar.
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
B Select menu item.
Press w e to move the highlight to
ENTER.
, then press
● The following pop-up window appears under the selected
item.
C Select the chapter.
Press the number keys (0-9) to enter the desired chapter
number, then press ENTER.
● The unit starts playback from the selected chapter.
Examples:
To select track 5, press the number key “5”.
To select track 15, press the number key “1” and “5”.
To select track 25, press number key “2” and “5”.
● It is not possible to use the number key “+10” and “–10”.
If you have specified a wrong selection
Enter the appropriate number keys again.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● When “X” is displayed on the TV screen in step C, the
chapter you have selected is not contained in the disc, or
chapter search does not work on the disc.
● Chapter Search starts automatically when you select the
desired chapter in step C depending on the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
EN
OPERATIONS ON DVD DECK (cont.)
C Select the subtitle language.
Press rt repeatedly to select the desired subtitle
language, then press ENTER.
● Each time you press the button, the subtitle language changes.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● It is impossible to select “OFF” when using the on-screen bar.
To select “OFF”, press ON SCREEN to clear the on-screen bar,
then press SUB TITLE repeatedly until “OFF” is selected.
● For DVD VIDEO
Some subtitle languages are abbreviated in the pop-up
window. See “Language Code List” (੬ pg. 21).
● For SVCD
SVCD can contain up to four subtitles. Pressing SUB TITLE
changes the subtitles regardless of whether the subtitles are
recorded or not. (Subtitles will not change if no subtitle is
recorded.)
● When “X” appears on the TV screen in step C, subtitle
language is not recorded.
When using the SUB TITLE button:
A Access the menu.
Press SUB TITLE.
● The following pop-up window appears on the TV screen.
Example (DVD):“ENGLISH” is selected out of 3 subtitle
languages recorded.
Subtitle Selection
B Select the subtitle language.
Press rt repeatedly to select the desired subtitle
language. To select “OFF”, press SUB TITLE repeatedly
until “OFF” is selected.
You can select subtitle language.
● During playback
● Each time you press the button, the subtitle language changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
When using the on-screen bar
A Access the on-screen bar.
the TV screen.
NOTE:
is not recorded.
When “X” appears on the TV screen in step B, subtitle language
Press ON SCREEN twice. The on-screen bar appears on
B Select menu item.
Press w e to move the highlight to
ENTER.
, then press
● The following pop-up window appears under the selected
item.
Example (DVD):“ENGLISH” is selected out of 3 subtitle
languages recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
53
When using the ANGLE button:
Angle Selection
A Access the menu.
Press ANGLE.
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains “multi-angle” parts, where multiple cameras were used
to shoot the same scene from different angles.
● The following pop-up window appears on the TV screen.
Example:The first view angle is selected out of 3 view angles
recorded.
If the disc contains “multi-angle” parts, “
” appears on the TV
screen at the beginning of the “multi-angle” part when “ON
SCREEN GUIDE” is set to “ON”.
● During playback
When using the on-screen bar
A Access the on-screen bar.
the TV screen.
B Select the view angle.
Press ON SCREEN twice. The on-screen bar appears on
Press rt or ANGLE repeatedly to select the desired
view angle.
B Select menu item.
● Each time you press the button, the angle of the scene
changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
Press w e to move the highlight to
ENTER.
, then press
● The following pop-up window appears under the selected
Example:
item.
1/3]2/3]3/3](Back to the beginning)
Example: The first view angle is selected out of 3 view angles
recorded.
1/3
1/3
1
2
1/3
3
C Select the view angle.
Press rt repeatedly to select the desired view angle,
then press ENTER.
● Each time you press the button, the angle of the scene
changes.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
When “X” appears on the TV screen in step C, the current
scene is not recorded from multiple angles.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
EN
OPERATIONS ON DVD DECK (cont.)
B Select menu item.
Press w e to move the highlight to
ENTER.
, then press
● The following pop-up window appears under the selected
item.
Example:“ENGLISH” is selected out of 4 audio languages
recorded.
C Select the audio language.
Press rt repeatedly to select the desired audio
language, then press ENTER.
● Each time you press the button, the audio language changes.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
● Some audio languages are abbreviated in the pop-up window.
See “Language Code List” (੬ pg. 21)
● If “X” appears on the TV, the current scene does not contain
plural audio languages.
When using the A.MONITOR button:
A Access the menu.
Press A.MONITOR.
● The following pop-up window appears on the TV screen.
Example: “ENGLISH” is selected out of 3 audio languages
recorded.
Audio Language Selection
Some DVD discs contain the multiple audio.
You can select the audio language of movies (DVD VIDEO).
● During playback
B Select the audio language.
When using the on-screen bar
Press rt or A.MONITOR repeatedly to select the
desired audio language.
● Each time you press the button, the audio language changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
A Access the on-screen bar.
the TV screen.
Press ON SCREEN twice. The on-screen bar appears on
NOTE:
Some audio languages are abbreviated in the pop-up window.
See “Language Code List” (੬ pg. 21).
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
55
When using the A.MONITOR button:
Audio Channel Selection
A Access the menu.
● The following pop-up window appears on the TV screen.
Example:“ST” (stereo) is selected out of 3 audio channels
recorded.
Press A.MONITOR.
When you play certain karaoke (Video CD/SVCD), you can
enjoy karaoke by selecting the audio channel to play.
● The sound of each audio channel depends on the contents of
the disc.
● During playback
When using the on-screen bar
A Access the on-screen bar.
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
B Select the audio channel.
Press rt or A.MONITOR repeatedly to select the
desired audio channel.
B Select menu item.
● Each time you press the button, the audio channel changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
Press w e to move the highlight to
ENTER.
, then press
● The following pop-up window appears under the selected
item.
For Video CD
ST]L]R](Back to the beginning)
Example: “ST” (stereo) is selected.
To listen to normal stereo playback.
To listen to L (left) audio channel only.
To listen to R (right) audio channel only.
ST:
L:
R:
For SVCD
C Select the audio channel.
ST 1]ST 2]L 1]R 1]L 2]R 2](Back to the beginning)
Press rt repeatedly to select the desired audio channel,
then press ENTER.
To listen to normal stereo playback of ST 1 or
ST 2 channel.
ST 1/ST 2:
● Each time you press the button, the audio channel changes.
To listen to the L (left) 1 or 2 audio channel.
To listen to the R (right) 1 or 2 audio channel.
L 1/L 2:
To clear the on-screen bar
Press ON SCREEN.
R 1/R 2:
Download from Www.Somanuals.com. All Manuals Search And Download.
56
EN
OPERATIONS ON DVD DECK (cont.)
C Access the DVD Set Up menu.
B Press w e to select “ OTHERS”.
Parental Lock
A Press SET UP.
This function restricts playback of DVD VIDEO discs which
contain violent (and other) scenes according to the level set by
the user. For example, if a movie which includes violent scenes
supports the parental lock feature, such scenes which you do not
want to let children view can be cut or replaced with other
scenes.
D Access the “PARENTAL LOCK“ menu.
Press rt repeatedly to
move the highlight to
“PARENTAL LOCK“, then
press ENTER.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
● The “PARENTAL LOCK“ sub-
menu appears on the TV
screen.
● It is possible to access the
“PARENTAL LOCK“ menu
only in the stop mode when a
DVD disc is loaded on the
unit.
E Access the country code menu.
PARENTAL LOCK
Press ENTER, then press rt
repeatedly to move the
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
highlight to “COUNTRY
_
_
_
_
CODE“, then press ENTER.
SELECT
ENTER
USE
TO SELECT. USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
Press rt repeatedly to
move the highlight to select
the country code, then press
ENTER.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
UG
UM
US
UY
UZ
VA
NONE
_
_
_
_
VC
● See “Country/Area Code List
for Parental Lock” (੬ pg. 58).
● The highlight moves to “SET
LEVEL”.
SELECT
ENTER
USE
TO SELECT. USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
G Select the Level.
Press ENTER, then press rt
repeatedly to move the
highlight to select the level of
restriction, then press ENTER.
● The highlight moves to
“PASSWORD”.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
NONE
_
_
_
_
8
7
6
5
4
3
To set Parental Lock for the first time
SELECT
ENTER
USE
TO SELECT. USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
● The smaller the value of level
is, the more restrictive the
Parental Lock level is.
● Select “NONE” to cancel this
function.
A Turn on the unit.
Press POWER (1).
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
57
H Enter the password.
Press the number keys to
enter a four-digit number as
your password, then press
ENTER.
Press the appropriate number keys to enter 4-digit
password, then press ENTER.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
4
_
_
_
_
● The password entered in the this step becomes the new
password. If you do not change the password, enter the same
password as in the step B.
● Even if you want to change only the country code and/or level,
do not forget to enter the password after changing the country
code and/or the level. Otherwise, the new country code and/
or the level will not become effective.
● The highlight moves to “EXIT”.
SELECT
ENTER
NEW PASSWORD
TO EXIT, PRESS [SET UP].
?
••• PRESS
0
~
9
KEY
I Return to the OTHERS menu screen.
Press ENTER.
● The “ OTHERS” menu resumes.
Press SET UP.
To return to the normal screen
NOTES:
Press SET UP.
● When you enter the wrong password more than 3 times in
step B on the left column, the highlight moves to “EXIT”
automatically and rt does not work.
NOTE:
Remember your password, or make a note of it.
● If you forget your password, enter “8888” in step B.
To change the settings
To temporarily release the Parental
Lock
You can change the Parental lock settings later.
When you set the parental level strictly, some discs may not be
played back at all. When you insert such a disc and try to play
back it, the following Parental Lock screen appears on the TV
screen, asking you whether you want the Parental Lock to be
temporarily released or not.
A Access the Parental Lock screen.
A Press SET UP.
B Press w e to select “ OTHERS”.
C Press rt repeatedly to move the highlight to
“PARENTAL LOCK“, then press ENTER.
● The “PARENTAL LOCK“ sub-menu appears on the TV screen.
● You can only move the highlight to “PASSWORD” or to
“EXIT” before you enter your password.
A Access the password screen.
A Place the disc in the disc
PARENTAL LOCK
tray.
TEMPORARY RELEASE
NOT RELEASE
● If the disc rated higher than the
_
_
_
_
PASSWORD
B Enter the password.
keys to enter 4-digit
password, then press ENTER.
If you enter the wrong
password, “WRONG!
RETRY...” appears at the
bottom of the TV screen.
Enter the correct password.
selected level, the following
screen appears.
Press the appropriate number
B Press rt to move the
SELECT
ENTER
PARENTAL LOCK
PASSWORD? ••• PRESS
0
~
9
KEY
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
4
highlight to
_
_
_
_
“TEMPORARY RELEASE”,
then press ENTER.
● If you select “NOT RELEASE”,
you cannot play back that
SELECT
ENTER
NEW PASSWORD
TO EXIT, PRESS [SET UP].
?
••• PRESS
0
~
9
KEY
B Enter the password.
C Change the country code.
Press the appropriate number keys to enter 4-digit
password, then press ENTER.
Press rt to select the country code, then press ENTER.
● See “Country/Area Code List for Parental Lock” (੬ pg. 58).
● When you change the country code, you must select the level.
● If you enter the wrong password, “WRONG! RETRY...”
● If you enter the correct password, the Parental lock is released
and the unit starts playback.
D Change the level.
NOTES:
Press rt to select the desired level, then press ENTER.
● When you enter the wrong password more than 3 times in
step B above, the highlight moves to “NOT RELEASE”
automatically and rt do not work. In such a case, press
ENTER, then press OPEN/CLOSE (x) to remove the disc.
● If you forget your password, enter “8888” in step B.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
EN
OPERATIONS ON DVD DECK (cont.)
Country/Area Code List for Parental Lock
AD
AE
Andorra
ES
Spain
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
ET
Ethiopia
AF
FI
FJ
FK
Finland
Fiji
Falkland Islands (Malvinas)
AG
AI
AL
AM
AN
AO
AQ
AR
AS
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaijan
Bosnia and Herzegovina
Barbados
Bangladesh
Belgium
FM
FO
FR
Micronesia (Federated States of)
Faroe Islands
France
France, Metropolitan
Gabon
United Kingdom
Grenada
Georgia
French Guiana
FX
GA
GB
GD
GE
GF
GH
GI
AT
AU
AW
AZ
BA
BB
BD
BE
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe
Equatorial Guinea
Greece
South Georgia and the South Sandwich Islands
Guatemala
Guam
Guinea-Bissau
Guyana
Hong Kong
Heard Island and McDonald Islands
Honduras
Croatia
Haiti
Hungary
GL
GM
GN
GP
GQ
GR
GS
GT
GU
GW
GY
HK
HM
HN
HR
HT
HU
ID
IE
IL
IN
IO
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
BF
Burkina Faso
Bulgaria
BG
BH
BI
Bahrain
Burundi
BJ
Benin
BM
BN
BO
BR
BS
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
BT
Bhutan
BV
BW
BY
BZ
CA
CC
CF
Bouvet Island
Botswana
Belarus
Indonesia
Ireland
Israel
India
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
British Indian Ocean Territory
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
Iraq
Switzerland
Côte d’Ivoire
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Iran (Islamic Republic of)
Iceland
Italy
Jamaica
Jordan
Japan
Kenya
Kyrgyzstan
Cambodia
Kiribati
Comoros
KM
KN
KP
KR
KW
KY
KZ
LA
LB
Saint Kitts and Nevis
Korea, Democratic People’s Republic of
Korea, Republic of
Kuwait
Cayman Islands
Kazakhstan
DK
DM
DO
DZ
EC
Lao People’s Democratic Republic
Lebanon
Ecuador
Estonia
Egypt
Western Sahara
Eritrea
EE
EG
EH
ER
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
59
LC
Saint Lucia
Liechtenstein
Sri Lanka
SA
SB
SC
SD
SE
Saudi Arabia
Solomon Islands
Seychelles
LI
LK
LR
LS
LT
LU
LV
LY
Liberia
Sudan
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Slovakia
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Sao Tome and Principe
El Salvador
Syrian Arab Republic
Swaziland
Turks and Caicos Islands
Chad
SG
SH
SI
SJ
MA
MC
MD
MG
MH
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
SK
SL
SM
SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
French Southern Territories
Togo
TG
TH
TJ
TK
TM
TN
TO
TP
Thailand
Tajikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
TR
TT
Turkey
Trinidad and Tobago
Tuvalu
TV
TW
TZ
UA
UG
UM
US
UY
UZ
VA
VC
VE
VG
VI
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Nicaragua
Netherlands
Norway
NL
NO
NP
NR
NU
NZ
OM
PA
Uganda
Nepal
United States Minor Outlying Islands
United States
Uruguay
Nauru
Niue
New Zealand
Oman
Uzbekistan
Vatican City State (Holy See)
Saint Vincent and the Grenadines
Venezuela
Panama
Peru
French Polynesia
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and Miquelon
Pitcairn
Puerto Rico
Portugal
Palau
Paraguay
PE
PF
Virgin Islands (British)
Virgin Islands (U.S.)
Viet Nam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
Qatar
Réunion
Romania
Russian Federation
Rwanda
Download from Www.Somanuals.com. All Manuals Search And Download.
60
EN
OPERATIONS ON DVD DECK (cont.)
NOTES:
● Because of the disc characteristics or recording condition,
some discs may not be played back or it takes time to start
playback.
About MP3 Disc
This unit can playback CD discs recorded by the MP3 format
(we refer to those discs as MP3 discs in this manual).
Operations for MP3 discs are similar to those for Audio CD
discs, though there are some restrictions and differences.
● The unit does not support “packet writing” discs.
● If there are any Tracks (files) which are stored on a disc
directly and do not belong to any Group (directory), the unit
recognized them as belonging to an independent Group.
● The unit plays back Groups/Tracks on an MP3 disc in the
alphabetical order.
● For example, if there are three title Groups [one], [two] and
[three] on a disc, the playback order is [one], [three] then
[two]. Tracks in a Group are played back in the same way.
● Therefore, an MP3 disc on the market may be played back in
the different order from the order printed on its sleeve.
What is MP3?
MP3 is the abbreviation of “MPEG1 Audio Layer 3”. MPEG
Audio is a compression specification that compresses the audio
portion only. This image compression method is used in DVD or
Video CD, etc. The audio data has been compressed into about
1/10.
On an MP3 disc, each material (song) is recorded on each Track
(file), which usually belongs to a Group (folder).
MP3 control display
The MP3 control display appears on the TV screen and playback
starts when an MP3 disc is loaded.
Track A.mp3
Group 1
Track B.mp3
Total group number on
disc
Current track
number
Total track number
in current group
Track C.mp3
FILE
Time – – : – –
8
*
MP3 disc
Group 2
Group : 1 / 3
Blue
Red
Green
Track: 1 / 14 (Total 14)
Cloudy
Fair
Fog
Track D.mp3
Track E.mp3
Hail
Indian summer
Rain
Track F.mp3
Group 4
Shower
Snow
Thunder
Typhoon
Wind
Group 3
Winter sky
Current group
number
Current track
Total track number
on disc
This unit can recognize up to 99 Groups and up to 150 Tracks
per Group.
If a disc includes more than the Tracks above limit, the unit stops
detecting Tracks when the number of detected Tracks reaches
the limit and ignores the subsequent Tracks. The unit also
ignores any non-MP3 file in the disc.
Current group
* Elapsed playing time of current track
Elapsed playing time is only shown during playback.
NOTES for making a private MP3 disc using a CD-R/
CD-RW disc:
● Select “ISO9660” as the disc format.
● Finalize the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
61
Using the MP3 control display
MP3 Playback
A Turn on the unit.
Press POWER (1).
You can search and play back desired groups and tracks using
the MP3 control display.
B Select the DVD deck.
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
On the unit
On the Remote
Press DVD so that the DVD indicator lights up.
C Select the mode.
Be sure to set “FILE TYPE” to “AUDIO” before loading a
disc. (੬ pg. 76)
D Load the disc.
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
B Place the MP3 disc in the disc tray.
● For details, refer to “Placing a Disc” (੬ pg. 7).
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
● The MP3 control display appears on the TV screen when an
MP3 disc is loaded. (੬ pg. 60)
E Select the group.
Press rt to select the desired group, then press e.
F Start playback.
Press rt to select the desired track, then press ENTER or
PLAY (4).
● You can skip a track across a group. Press SKIP (6) to skip
to the first track of the next group when the last track of the
current group is selected.
G Pause playback.
Press PAUSE (9).
● To resume normal playback, press PLAY (4).
H Stop playback.
Press STOP (8). Press OPEN/CLOSE (x) on the DVD
deck to open the disc tray, then remove the disc.
NOTES:
● PLAY (4), STOP (8), PAUSE (9), SKIP (2) and SKIP (6)
buttons function the same as with Audio CD discs, however,
REW (3) and FF (5) buttons do not function for MP3
playback.
● Resume playback also does not function for MP3 playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
EN
OPERATIONS ON DVD DECK (cont.)
Repeat Playback
You can repeat playback of the current group, track or all
groups.
● While MP3 control display is on the TV:
A Select the mode.
Press REPEAT to select the desired repeat mode.
● Each time you press REPEAT, the mode changes as follows:
TRACK]GROUP]ALL]OFF (No indication)](Back to the
beginning)
The current track is played back
repeatedly.
TRACK:
All tracks of the current group are
played back repeatedly.
GROUP:
All tracks are played back
repeatedly.
ALL:
Each track is played back once.
OFF (no indication):
● To stop Repeat Playback, press STOP (8).
● To cancel Repeat Playback, press REPEAT repeatedly until the
repeat mode display disappears on the TV screen.
● You can also quit Repeat Playback in the following cases:
• Press OPEN/CLOSE (x) to open the disc tray.
• Turn off the unit.
To return to the MP3 control display
Press STOP (8).
Group/track selection
To start playback by specifying the group/track number
A Press the number keys (0-10, +10) to enter the group
number.
B Press the number keys (0-10, +10) to enter the track
number.
● The entered number appears in the track number indication
and playback starts from the track you have specified.
Example:
To select 3:
To select 14:
To select 20:
Press 3.
Press +10, then 4.
Press +10, then 10.
Or press +10 twice, then 0.
Press +10, +10, then 4.
To select 24:
To select 110: Press +10 ten times, then 10.
To select 150: Press +10 fourteen times, then press 10 once.
NOTE:
You cannot select 150 even if you press +10 fifteen times, then
press 0 once.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
63
NOTES:
● We recommend to record a file at 640 x 480 resolution. (If a
file has been recorded at a resolution of more than 640 x 480,
it will take a longer time to be displayed.)
● This unit supports the JPEG files whose resolution is 32 to
8192 pixel in width and 32 to 7680 pixel in height.
● This unit can only play back baseline JPEG files*. Progressive
JPEG files* or lossless JPEG files* cannot be played back.
* Baseline JPEG format: Used for digital cameras, web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely used now.
● Some files on a JPEG disc may be played back distortedly.
● Because of the disc characteristics or recording condition,
some discs may not be played back or it takes time to start
playback.
About JPEG Disc
This unit can playback CD discs recorded by the JPEG format
(we refer to those discs as JPEG discs in this manual).
Operations for JPEG discs are similar to those for Audio CD
discs, though there are some restrictions and differences.
What is JPEG?
JPEG is the abbreviation of “Joint Photographic Expert Group”.
JPEG is a still-picture data compression system.
On a JPEG disc, each still picture is recorded as a file, which
usually belongs to a Group (folder).
● The unit does not support “packet writing” discs.
● If there are any Files which are stored on a disc directly and do
not belong to any Group (directory), the unit recognized them
as belonging to an independent Group.
● The unit plays back Groups/Files on an JPEG disc in the
alphabetical order.
File A.jpg
Group 1
File B.jpg
● For example, if there are three title Groups [one], [two] and
[three] on a disc, the playback order is [one], [three] then
[two]. Files in a Group are played back in the same way.
● Therefore, an JPEG disc on the market may be played back in
the different order from the order printed on its sleeve.
File C.jpg
JPEG disc
Group 2
File D.jpg
File E.jpg
JPEG control display
File F.jpg
Group 4
The JPEG control display appears on the TV screen and playback
starts when a JPEG disc is loaded.
Total group number on
disc
Current file
number
Total file number in
current group
Group 3
FILE
8
This unit can recognize up to 99 Groups and up to 150 Files per
Group.
If a disc includes more than the Files above limit, the unit stops
detecting Files when the number of detected Files reaches the
limit and ignores the subsequent Files. The unit also ignores any
non-JPEG file in the disc.
Group : 1 / 3
Sea
Mountain
Sky
File: 1 / 14 (Total 41)
Anemone fish
Bonito
Butterfly fish
Dolphin
Garden eel
Manta ray
Seal
Swordfish
Thunder
Tuna
Whale
Whale shark
NOTES for making a private JPEG disc using a CD-R/
CD-RW disc:
● Select “ISO9660” as the disc format.
● Finalize the disc.
Current group
number
Current file
Total file number on
disc
Current group
Download from Www.Somanuals.com. All Manuals Search And Download.
64
EN
OPERATIONS ON DVD DECK (cont.)
Using the JPEG control display
JPEG Playback
A Turn on the unit.
Press POWER (1).
You can search and play back desired groups and files using the
JPEG control display.
B Select the DVD deck.
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
On the unit
On the Remote
Press DVD so that the DVD indicator lights up.
C Select the mode.
Be sure to set “FILE TYPE” to “STILL PICTURE” before
loading a disc. (੬ pg. 76)
D Load the disc.
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
B Place the JPEG disc in the disc tray.
● For details, refer to “Placing a Disc” (੬ pg. 7).
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
● The JPEG control display appears on the TV screen when a
JPEG disc is loaded. (੬ pg. 63)
E Select the group.
Press rt to select the desired group, then press e.
F Start playback.
Press rt to select the desired file, then press ENTER or
PLAY (4).
● You can skip a file across a group. Press SKIP (6) to skip to
the first file of the next group when the last file of the current
group is selected.
The slide-show playback starts from the selected file.
● After selecting a file, press PLAY (4) to starts slide-show
playback from the selected file, or press ENTER to show the
selected file.
● The playback interval time of slide-show depends on the file
size.
G Pause playback.
Press PAUSE (9).
● To resume normal playback, press PLAY (4).
H Stop playback.
deck to open the disc tray, then remove the disc.
Press STOP (8). Press OPEN/CLOSE (x) on the DVD
NOTES:
● PLAY (4), STOP (8), PAUSE (9), SKIP (2) and SKIP (6)
buttons function the same as with Audio CD discs, however,
REW (3) and FF (5) buttons do not function for JPEG
playback.
● Resume playback also does not function for JPEG playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
65
Repeat Playback
You can repeat playback of the current group, file or all groups.
● While JPEG control display is on the TV:
A Select the mode.
Press REPEAT to select the desired repeat mode.
● Each time you press REPEAT, the mode changes as follows:
GROUP]ALL]OFF (No indication)](Back to the beginning)
All files of the current group are
played back repeatedly.
GROUP:
All files are played back
repeatedly.
ALL:
Each file is played back once.
OFF (No indication):
B Start playback.
Press PLAY (4).
● To stop Repeat Playback, press STOP (8).
● To cancel Repeat Playback, press REPEAT repeatedly until the
repeat mode display disappears on the TV screen.
● You can also quit Repeat Playback in the following cases:
• Press OPEN/CLOSE (x) to open the disc tray.
• Turn off the unit.
To return to the JPEG control display
Press STOP (8).
Zooming
Press ZOOM during playback.
● When you want to zoom the picture during slide-show
playback, first press PAUSE (9), then press ZOOM.
● Each press of ZOOM changes the magnification in the
following steps:
ZOOM OFF ] ZOOM 1 ] ZOOM 2 ] (Back to the
beginning)
● To resume normal playback, press ENTER.
Group/file selection
To start slide-show playback by specifying the group/file
number
A Press the number keys (0-10, +10) to enter the group
number.
B Press the number keys (0-10, +10) to enter the file
number.
● The slide-show playback starts from the file you have
specified.
● To display only the selected file, then press ENTER. To start
slide-show playback from that file, press ENTER again.
Example:
To select 3:
To select 14:
To select 20:
Press 3.
Press +10, then 4.
Press +10, then 10.
Or press +10 twice, then 0.
Press +10, +10, then 4.
To select 24:
To select 110: Press +10 ten times, then 10.
To select 150: Press +10 fourteen times, then press 10 once.
NOTE:
You cannot select 150 even if you press +10 fifteen times, then
press 0 once.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
EN
EDITING (VCR DECK)
You can use a camcorder as the source player and your
unit as the recording deck.
Edit From A
Camcorder
Slide the TV/VCR/DVD switch to the right.
A Make connections.
Connect the camcorder’s AUDIO OUT and VIDEO OUT
connectors to the unit’s front panel AUDIO and VIDEO
input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
● When a Master Edit Control - equipped JVC camcorder is used, the
camcorder is capable of controlling the unit. Refer to the camcorder’s
instruction manual for operating procedure.
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Set the unit’s input mode.
Press AUX (number key “0”) and/or CH to select “F-1”.
D Set the edit mode.
See “PICTURE CONTROL” on page 73.
E Engage the Record Pause mode.
Use PLAY (4), REW (3), or FF (5) to locate the
point where you start recording, then press and hold
PAUSE (9) and press REC (7) to engage the Record
Pause mode.
Recorder
F Start the camcorder.
Engage the Play mode of the camcorder.
G Start the unit.
To REMOTE
PAUSE
connector
AUDIO input
VIDEO
input
Press PLAY (4) to engage the Record mode of the unit.
NOTES:
Audio/video cable
(not supplied)
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step D, be sure to select
“NORM” after you finish dubbing the tapes.
Mini-plug cable
(not provided)
(JVC camcorder
only)
To Audio/VIDEO
Output
connectors
Camcorder
To Edit
Player
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
67
You can use your unit as the source player or as the
recording deck.
Edit To Or From
Another Video
Recorder
Slide the TV/VCR/DVD switch to the right.
A Make connections.
A When using your unit as the source player ...
... connect its AUDIO/VIDEO OUTPUT connectors to
the audio/video input connectors on another recorder.
B When using your unit as the recording deck ...
... connect its AUDIO/VIDEO input connectors to the
audio/video output connectors on another recorder.
A
TV receiver
Player
Your unit
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
Audio/video
cable
Audio/video cable
AV mode
C Set the input mode of recording deck.
With this video unit, press AUX (number key “0”) and/or
CH to select “F-1”.
● When using another recorder as the recording deck, refer to its
instruction manual.
Another recorder
D Set the edit mode.
Recorder
Recorder
See “PICTURE CONTROL” on page 73.
B
Your unit
Engage the Record Pause mode of the
recording deck.
E
Locate the point where you start recording, then engage
the Record Pause mode.
Audio/video cable
F Start the source player.
Audio/video
cable
Engage the Play mode of the source player.
AV mode
G Start the recording deck.
Engage the Record mode of the recording deck.
Another recorder
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step D, be sure to select
“NORM” after you finish dubbing the tapes.
TV receiver
Player
● When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (੬ pg. 73)
Download from Www.Somanuals.com. All Manuals Search And Download.
68
EN
EDITING (VCR DECK) (cont.)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
In such case, “ERROR” appears on the front display panel.
Dubbing
(from DVD to VCR)
A Load a cassette and place a disc.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
B Place the disc in the disc tray.
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
B Prepare the VCR deck for dubbing.
A Press VCR.
B Press SP/EP to select recording speed.
C Search for the point where you want to start dubbing
by pressing PLAY (4), FF (5) or REW (3) then
press STOP (8).
C Prepare the DVD deck for dubbing.
A Press DVD.
B Search for the point where you want to start dubbing
by pressing PLAY (4), FF (5), REW (3), 6 or
2.
C Press PAUSE (9) to pause playback a little before the
start point.
D Start dubbing.
Press and hold REC (7), then press PLAY (4) on the
Remote.
● “dub” lights on the front display panel.
E End dubbing.
Press STOP (8).
● Be sure to press STOP (8) while the VCR indicator lights up on
the unit.
NOTES:
● You can dub from DVD to VCR regardless of the scan mode
setting. (੬ pg. 78) However, the progressive signals will be
converted to the interlace signals when dubbing.
● Set “ON SCREEN GUIDE” to “OFF” (੬ pg. 78) if you do not
want to record the on-screen display for DVD discs during
dubbing.
● There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing
is not recorded.
● Set “PICTURE CONTROL” to “EDIT”. (੬ pg. 73)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
69
EDITING (DVD DECK)
You can dub selected audio from the DVD or Audio CD disc to
a MD etc.
However, it is not possible to dub the copy-protected disc.
Digital Audio
Dubbing
Example: Dubbing to a MD
A Make connections.
Connect the coaxial cable between the unit and the
digital audio device.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
B Place a disc and load a MD.
For the DVD deck
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
Recorder
B Place the disc in the disc tray.
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
For the digital audio device
Insert a MD.
Digital audio device
(MD deck etc.)
C Prepare the DVD deck for dubbing.
A Press DVD and select the audio to be dubbed.
B Search for the point where you want to start dubbing
by pressing PLAY (4), FF (5) or REW (3) then
press STOP (8).
Coaxial cable
(not supplied)
C Press REW (3) a little, then press PLAY (4) to start
playback.
Player
D Press PAUSE (9) to pause playback a little before the
start point.
D Prepare the audio device for dubbing.
Select the input mode.
Rear of unit
E Start dubbing.
DIGITAL AUDIO OUT
A Press PLAY (4) to start playback on the DVD deck.
B Start recording on the audio device.
F End dubbing.
Stop recording on the audio device. Then press STOP (8)
to stop playback on the DVD deck.
NOTES:
● There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
● You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO
OUTPUT” to “PCM ONLY”. (੬ pg. 76)
Download from Www.Somanuals.com. All Manuals Search And Download.
70
EN
REMOTE
On the Remote
Keep pressing VCR down during steps A – B.
Remote Control
Functions
A Change the remote control code.
Press the number key “1” for A, “2” for B, “3” for C or
“4” for D.
B Set the remote control code.
Remote A/B/C/D Code Switching
The Remote is capable of controlling four JVC video units
independently. Each of units can respond to one of four codes
(A, B, C or D). The remote control is preset to send A code
signals because your unit is initially set to respond to A code
signals. You can easily modify your unit to respond to B, C or D
code signals.
Press ENTER to set the code.
NOTE:
Once the batteries are removed, the remote control code is back
to A.
On the unit
Before performing the following steps:
Slide the TV/VCR/DVD switch to the right.
C Turn off the unit.
Press POWER (1).
D Display the code.
Press PLAY (4) on the unit for over 5 seconds while the
unit is turned off. The code currently set appears on the
front display panel.
● If the code displayed on the front display panel is different
from the code set on the Remote, go to step E.
E Change the unit’s code.
Press STOP (8) on the Remote. The code currently set on
the Remote will be applied to the unit.
NOTE:
Even if you unplug the end of the mains power cord from the
mains, the code currently set remains.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
71
Connecting To A Dolby Digital Decoder
or An Amplifier With A Built-in DTS
(DVD deck only)
These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS.
DIGITAL AUDIO OUT
Back of unit
Dolby Digital decoder or
amplifier with a built-in DTS
To DIGITAL AUDIO
input
Coaxial cable
(not supplied)
CAUTIONS:
Make connections.
● This unit has a dynamic range of more than 80 dB with regards
to its Hi-Fi audio capability. It is recommended that you check
the maximum level if you are going to listen to the Hi-Fi audio
signals through a stereo amplifier. A sudden surge in the input
level to the speakers may damage them.
Connect the coaxial cable between the unit and the
Dolby Digital decoder or amplifier with a built-in DTS.
NOTES:
● Some speakers and televisions are specially shielded to
prevent television interference. If both are of the non-shielded
type, do not place the speakers adjacent to the TV set as this
can adversely affect the video playback picture.
● For Dolby digital sound, set “DIGITAL AUDIO OUTPUT” to
“DOLBY DIGITAL/PCM”. (੬ pg. 76)
● For DTS sound, set “DIGITAL AUDIO OUTPUT” to “STREAM/
PCM”. (੬ pg. 76)
Download from Www.Somanuals.com. All Manuals Search And Download.
72
EN
SUBSIDIARY SETTINGS
You can change various mode settings on the Function
Set screen by following the procedure described below.
● For each mode setting, see pages 73 to 74.
Mode Set
A Turn on the unit.
(VCR deck)
Press POWER (1).
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Access the Main Menu screen.
Press SET UP.
D Access the Function Set screen.
Press rt to move the
highlight bar (arrow) to
“FUNCTION SET”, then
press ENTER or e.
E Select the mode.
Press rt to move the highlight bar (arrow) to the item
you want to change.
F Select the mode setting.
Press ENTER or e.
G Return to the normal screen.
Press SET UP.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
73
* The default setting is bold in the table below.
This feature helps you to adjust the playback picture quality according to your
preference. Normally select “NORM”.
8 PICTURE CONTROL
NORM
EDIT
NORM
EDIT
SOFT
:
Picture quality is adjusted automatically.
SOFT
SHARP
:
Minimizes picture degradation during editing (recording and playback).
:
Reduces image coarseness when viewing overplayed tapes containing a
lot of noise.
SHARP
:
Clearer, sharper-edged picture when viewing images with lots of flat,
same-colored surfaces such as cartoons.
NOTES:
● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change until you
select another mode.
● When you select “EDIT” to dub tapes, be sure to select “NORM” after you finish dubbing
the tapes.
When this function is set to “ON”, various operational indicators appear on the TV
8 SUPERIMPOSE
screen. Messages appear in the selected language. (੬ pg. 18)
ON
OFF
NOTES:
● When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to
“OFF” before starting.
● During playback, the operation mode indicators may be disturbed depending on the type
of tape being used.
When this function is set to “ON”, the unit automatically switches to EP mode to
allow complete recording if there is not enough tape to record the entire program
while timer-recording in SP mode.
8 AUTO SP]EP TIMER
ON
OFF
For Example:
Recording a program of 140 minutes in length onto a 120-minute tape
Approximately 110 minutes
SP mode
Approximately 30 minutes
EP mode
Total 140 minutes
Make sure you set this function to “ON”, before the timer-recording starts.
NOTES:
● If you have programmed the unit to timer-record 2 or more programs, the second program
and those thereafter may not fit on the tape if you set “AUTO SP]EP TIMER” to “ON”. In
this case, make sure the mode is not engaged, then set the tape speed manually during
timer programming.
● In order to ensure that the recording fits on the tape, this feature may leave a slight non-
recorded section at the end of the tape.
● There may be some noise and sound disturbance at the point on the tape where the unit
switches from SP to EP mode.
● The Auto SP]EP Timer feature is not available during ITR (Instant Timer Recording), and
the feature will not work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and
T(ST)-120.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
EN
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
When this function is set to “ON”, you can automatically correct vertical
vibration in the picture when playing back unstable recordings made on
another recorder.
8 VIDEO STABILIZER
ON
OFF
NOTES:
● When you finish viewing a tape, be sure to set this function to “OFF”.
● Regardless of the setting, this function has no effect during recording and during special
effects playback.
● The on-screen display may jitter vertically when this function is set to “ON”.
● To watch recordings with close-caption, set this function to “OFF”.
When this function is set to “ON”, the TV screen becomes all blue when
receiving a channel not in use.
8 BLUE BACK
ON
OFF
NOTE:
When you want to receive an unstable channel with poor signals, set this function to
“OFF”.
● When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on both the normal and
Hi-Fi tracks. The main audio is not recorded.
8 2ND AUDIO RECORD
ON
OFF
If a non-SAP program is received, the main audio is recorded on both the Hi-Fi
and normal tracks.
● When this function is set to “OFF”, the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the unit;
● The “STEREO” indicator appears on the screen for about 5 seconds if the program is a
stereo broadcast.
● The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP
broadcast.
● Both indicators appear when a stereo program is accompanied by SAP sound.
This unit can record two sound tracks simultaneously (normal and Hi-Fi) on a
Hi-Fi stereo tape. You can select the sound track(s) to listen to while playing
back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape
containing two separate audio programs on the Hi-Fi tracks, you can choose
either one by selecting either “HI-FI L” or “HI-FI R”.
8 AUDIO MONITOR
HI-FI
HI-FI L
HI-FI R
NORM
MIX
HI-FI:
Normally select this. Hi-Fi sound is played back.
Sound on the left Hi-Fi channel is played back.
Sound on the right Hi-Fi channel is played back.
Sound on the normal track is played back.
Both sounds on the Hi-Fi track and normal track are mixed
and played back.
HI-FI L:
HI-FI R:
NORM:
MIX:
NOTES:
● While playing back a monaural tape, sounds on the normal track will be heard
regardless of this setting.
● You can also use the A.MONITOR button on the Remote to select the desired monitor
sound. (੬ pg. 30)
When this function is set to “3H”, the unit is turned off automatically if no
operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on
the screen 3 minutes before the unit is turned off.
8 AUTO POWER OFF
3H
OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
75
● The procedure shows how to set “RESUME” to “ON”
on the DVD Set Up menu screen as an example.
Mode Set
A Turn on the unit.
(DVD deck)
Press POWER (1).
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C Access the DVD Set Up menu screen.
OTHERS
A Press SET UP.
B Press w e to select
RESUME
ON
ON SCREEN GUIDE
PARENTAL LOCK
ON
“
OTHERS”.
● Each time you press the
button, the setup menus
change as follows;
SELECT
ENTER
USE
TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
LANGUAGE] PICTURE] AUDIO
OTHERS ](Back to the beginning)
]
D Select the mode.
Press rt to move the highlight to “RESUME”, then press
ENTER.
E Select the mode setting.
Press rt to select “ON”, then press ENTER.
F Return to the normal screen.
Press SET UP.
You can change various mode settings on the Mode Set
screen by following the procedure described below.
● For each mode setting, see pages 76 to 78.
MENU LANGUAGE (੬ pg. 20)
LANGUAGE
SUBTITLE (੬ pg. 20)
ON SCREEN LANGUAGE (੬ pg. 19)
PICTURE SOURCE (੬ pg. 76)
PICTURE
SCREEN SAVER (੬ pg. 76)
DIGITAL AUDIO OUTPUT (੬ pg. 76)
AUDIO
DOWN MIX (੬ pg. 77)
D. RANGE COMPRESSION (੬ pg. 77)
RESUME (੬ pg. 78)
ON SCREEN GUIDE (੬ pg. 78)
PARENTAL LOCK (੬ pg. 56)
OTHERS
Download from Www.Somanuals.com. All Manuals Search And Download.
76
EN
SUBSIDIARY SETTINGS (cont.)
Picture Settings
* The default setting is bold in the table below.
You can select the monitor type depending the TV used when you play back
DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to
“Monitor Set (DVD deck)” (੬ pg. 16).
8 MONITOR TYPE
16:9
4:3 LB
4:3 PS
You can obtain optimal picture quality by selecting whether the content on the
disc is processed by field (video source) or by frame (film source).
Normally set to “AUTO”.
8 PICTURE SOURCE
AUTO
FILM
AUTO:
Used to play back a disc containing both video and film
source materials. This unit recognizes the picture type (film or
video source) of the current disc according to the disc
information.
VIDEO
FILM:
VIDEO:
Suitable for playing back a film or progressive source disc.
Suitable for playing back a video source disc with relatively a
few moments.
● If the playback picture is unclear or noisy, or the oblique lines of the picture
are rough, try to change to other modes.
The TV screen may be burned out if a static picture is displayed for a long time.
When this function is set to “ON”, the unit automatically activates the screen
saver function if a static picture, such as an on-screen display or menu is
displayed for over 5 minutes.
8 SCREEN SAVER
ON
OFF
You can select files to play back, when both MP3 files and JPEG files are
recorded on a disc.
8 FILE TYPE
AUDIO
STILL PICTURE
AUDIO:
Select this to play back MP3 files.
STILL PICTURE: Select this to play back JPEG files.
NOTE:
Be sure to open and close the disc tray after changing the setting. The unit reads the disc
again and the selected file type can be recognized.
Audio Settings
* The default setting is bold in the table below.
Set to the appropriate mode according to the type of the device connected to
DIGITAL AUDIO OUT connector on the rear of unit.
It is not necessary to set this mode when you connect no device to DIGITAL
AUDIO OUT connector.
8 DIGITAL AUDIO OUTPUT
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
PCM ONLY:
Select this when you connect the unit’s DIGITAL AUDIO OUT
connector to the linear PCM digital input connector of other audio
device.
DOLBY DIGITAL/PCM:
Select this when you connect the unit’s DIGITAL AUDIO OUT
connector to the digital input connector of a Dolby Digital decoder
or an amplifier with a built-in Dolby Digital decoder.
STREAM/PCM:
Select this when you connect the unit’s DIGITAL AUDIO OUT
connector to the digital input connector of an amplifier with a built-
in DTS, Dolby Digital, or MPEG multichannel decoder.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
77
Set to the appropriate mode according to your audio system when you play
back a DVD VIDEO disc recorded with surround multichannel audio. This
setting affects only the analog audio output signal from the AUDIO OUTPUT
connectors (DVD) when playing back a DVD VIDEO disc recorded with
surround multichannel audio.
8 DOWN MIX
DOLBY SURROUND
STEREO
DOLBY SURROUND:
Select this when you enjoy multichannel surround audio by
connecting the unit’s analog AUDIO OUTPUT connector
(DVD) to a surround decoder or an internal amplifier.
Select this when you enjoy conventional 2-channel stereo
audio by connecting the unit’s analog AUDIO OUTPUT
connectors (DVD) to a stereo amplifier/receiver or TV, or
when you dub audio of a DVD VIDEO disc recorded with
surround audio to your MD, cassette, etc.
STEREO:
NOTE:
The “DOWN MIX” function does not work when the 3D Phonic function is activated.
(੬ pg. 44)
You can compress the dynamic range (the difference between the loudest and
quietest audio signals) of the sound when listening to the sound at a low
volume or at night.
This function is available with DVD VIDEO discs recorded with the Dolby
Digital format. Set to the appropriate mode according to the number of
channels recorded.
8 D. RANGE COMPRESSION
AUTO
ON
AUTO:
Audio is played back with channels other than Dolby Digital
channel 1 or 2 compressed.
Audio is played back with all channel compressed.
ON:
NOTES:
● This function works only when playing back a disc recorded with Dolby Digital format.
The setting is not effective for other discs.
● This function does not work when the 3D Phonic function is activated. (੬ pg. 44)
Output
Playback discs
STREAM/PCM
DOLBY DIGITAL/PCM
PCM ONLY
DVD VIDEO with
48 kHz, 16/20/24 bit linear
PCM
48 kHz, 16 bit linear PCM
DVD VIDEO with DTS
DTS bitstream
44.1 kHz, 16 bit stereo linear PCM
DVD VIDEO with Dolby
Digital
48 kHz, 16 bit stereo linear
PCM
Dolby Digital bitstream
44.1 kHz, 16 bit stereo linear PCM
44.1 kHz, 16 bit stereo linear PCM
Linear PCM
Audio CD/Video CD
Audio CD with DTS
MP3 disc
DTS bitstream
NOTES:
● The unit is not equipped with the DTS 5.1 channel decoding function.
● When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.
Never use the unit’s analog output connectors, which output incorrect signals that may damage your speakers.
● If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or
set the level control of the amplifier connected to the analog outputs to minimum.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
EN
SUBSIDIARY SETTINGS (cont.)
Others Settings
* The default setting is bold in the table below.
When this function is set to “ON”, you can use the resume function.
8 RESUME
(੬ pg. 43)
ON
OFF
ON:
You can start playback from the resume point of the
placed disc.
OFF:
You cannot use the resume function.
NOTE:
This function is not available for Audio CDs and MP3 discs.
When this function is set to “ON”, the unit can display “on-screen
guide” icons or characters which shows the conditions of the unit or
disc.
8 ON SCREEN GUIDE
ON
OFF
Scan Mode Set
Child Lock
● Turn on the TV and select the VCR channel (or AV
mode).
(DVD deck)
● Slide the TV/VCR/DVD switch to the right.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
You can disable the unit’s operation.
A Set the Child Lock.
This unit supports the progressive scan system (eg. 480p*)
as well as the conventional interlaced scan system (eg.
480i*).
If your TV equipped with component video connectors
supports the progressive video input, you can enjoy a
high quality picture by setting the progressive scan mode
to active.
Press and hold POWER (1) on the Remote for more
than 10 seconds while the unit is turned on. The unit
turns off, and “CL“ appears on the front display panel.
● Refer also to the instruction manuals supplied with your TV.
● If your TV equipped with component video connectors does
not support the progressive video input, do not change the
scan mode to the “PROGRESSIVE”.
● To release the child lock, press and hold POWER (1) on the
Remote until the unit turns on.
* 480p and 480i indicate the number of scanning lines and
scanning format of an image signal.
• 480p indicates 480 scanning lines with progressive format.
• 480i indicates 480 scanning lines with interlaced format.
NOTES:
● When the child lock function is in use, keep the Remote out of
the children’s reach.
● Timer recording programs will be performed even if the child
lock function activated.
A Switch the mode.
During playback or while stopped, press and hold
PROGRESSIVE SCAN on the unit or DVD on the Remote
for more than 3 seconds, to change the scan mode
between Progressive and Interlace mode.
● When the Progressive scan mode is selected, the Progressive
mode indicator ( ) lights up on the front display panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
79
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are
often easily corrected, and this can save you the trouble of sending your unit off for repair.
POWER
SYMPTOM
1. No power is supplied to the unit.
POSSIBLE CAUSE
● The AC power cord is disconnected.
● The batteries are weak.
CORRECTIVE ACTION
Connect the AC power cord.
2. The Remote won’t function.
Replace the dead batteries with new ones.
TAPE TRANSPORT (VCR deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. During recording, the tape does not
run. The counter display blinks on the
front display panel.
● The unit is in the Record Pause mode.
Press PLAY (4) to resume recording.
2. The tape will not rewind or fast-
forward.
● The tape is already fully rewound or
fast-forwarded.
Check the cassette.
PLAYBACK (VCR deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. The VCR deck can not be operated.
● The VCR deck is not selected.
On the unit
Press VCR/DVD repeatedly so that the
VCR indicator lights up.
On the Remote
Press VCR so that the VCR indicator lights
up.
2. The playback picture does not appear
while the tape is running.
● If you are using the RF connection,
If you are using the RF connection,
— the TV receiver’s channel selector is — set the TV receiver to the VCR channel.
not set to the VCR channel.
— perform “Set the VCR channel.”
— the unit’s VCR channel has not been (੬ pg. 12).
correctly set.
● If you are using the AV, S-VIDEO* or
If you are using the AV or S-VIDEO*,
Component Video* connection, the TV Component Video* connection, set the
receiver is not set to the AV mode.
* (DVD deck only)
TV to its AV mode.
* (DVD deck only)
3. Noise appears during visual search.
● This is normal.
—
4. Noise appears during normal
playback.
● The automatic tracking mode is
engaged.
Try manual tracking. (੬ pg. 30)
5. The playback picture is blurred or
interrupted while TV broadcasts are
clear or “USE CLEANING CASSETTE”
message appears on the screen.
● The video heads may be dirty.
Use a dry cleaning cassette ECL-3F, or
consult your JVC dealer.
6. Breaks are noticeable in Hi-Fi
soundtrack.
● The automatic tracking mode is
engaged.
Try manual tracking. (੬ pg. 30)
Download from Www.Somanuals.com. All Manuals Search And Download.
80
EN
TROUBLESHOOTING (cont.)
PLAYBACK (DVD deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. The button do not work.
● The operation is prohibited on the
placed disc.
—
2. The DVD deck can not be operated.
● The DVD deck is not selected.
On the unit
Press VCR/DVD repeatedly so that the
DVD indicator lights up.
On the Remote
Press DVD so that the DVD indicator
lights up.
3. “X” appears on the TV screen.
● The operation is prohibited on the
placed disc.
—
4. “REGION CODE ERROR!” appears on ● The disc’s region number does not
Use the discs whose region number
includes “ALL” or “1”. (੬ pg. 5)
the TV screen.
match that of the unit.
5. The disc cannot be played back.
● The disc’s region number does not
match that of the unit.
Use the discs whose region number
includes “ALL” or “1”. (੬ pg. 5)
● This type of the disc cannot be played
back.
See “Unplayable Discs” (੬ pg. 5).
● The disc is not placed properly.
Remove the disc, then place the disc
properly in the disc tray. (੬ pg. 7,
“Placing a Disc”)
● The Parental Lock is engaged, and the
placed disc is rated higher than the set
level.
Release the Parental Lock temporarily
(੬ pg. 57), or change the set level
(੬ pg. 57).
6. The language is not played back as
you set.
● The disc does not contain the language
you set.
—
7. Changing audio/subtitle language is
not possible.
● The disc does not contain the audio/
subtitle in the multiple languages.
With some discs, the language should be
set on the top menu. (੬ pg. 41)
8. The subtitles do not appears on the TV ● The disc does not contain the subtitles.
—
screen.
● The subtitle display is set to off.
Set the subtitles display to on. (੬ pg. 52)
● A-B Repeat Playback is in progress.
(੬ pg. 49)
The subtitles recorded around A-B point
may not appear.
9. Angle cannot be changed.
● The scene is not recorded from the
multiple angles.
—
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
81
MP3 Playback (DVD deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. A disc cannot be played.
●
●
No MP3 files are recorded to the disc.
Replace the disc.
MP3 files do not have the correct file
extension in their file names.
Add correct file extension (.mp3, .MP3 or
any uppercase and lowercase combination
such as “.Mp3”) to their file names.
●
●
MP3 files are not recorded in a format
compliant with ISO 9660 Level 1 or 2.
Replace the disc. (Record MP3 files using a
compliant application.)
The different types of files are recorded to The disc which contains the different types
the disc.
of files may not be played because of its disc
characteristics or recording conditions.
2. Not MP3 files but JPEG files are played.
●
●
The FILE TYPE setting is set to “STILL
PICTURE”.
When both MP3 files and JPEG files are
recorded to a disc, set “FILE TYPE” to
“AUDIO” to play MP3 files. (
੬
pg. 76)
3. The MP3 control display appears on the
TV screen, but no operation can be
performed.
No MP3 files or JPEG files are recorded to Replace the disc. (
the disc, or the disc is an unplayable disc
(such as CD-ROM).
੬
pg. 7)
JPEG Playback (DVD deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. A disc cannot be played.
●
●
No JPEG files are recorded to the disc.
Replace the disc.
JPEG files do not have the correct file
extension in their file names.
Add correct file extension (.jpg, .jpeg, .JPG,
.JPEG or any uppercase and lowercase
combination such as “.Jpg”) to their file
names.
●
●
JPEG files are not recorded in a format
compliant with ISO 9660 Level 1 or 2.
Replace the disc. (Record JPEG files using a
compliant application.)
2. Not JPEG files but MP3 files are played
back.
The FILE TYPE setting is set to “AUDIO”.
When both MP3 files and JPEG files are
recorded to a disc, set “FILE TYPE” to “STILL
PICTURE” to play JPEG files. (
੬
pg. 76)
RECORDING (VCR deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Recording cannot be started.
●
There is no cassette loaded, or the cassette Insert a cassette, or using adhesive tape,
loaded has had its record safety tab
removed.
cover the hole where the tab was removed.
2. TV broadcasts cannot be recorded.
3. Tape-to-tape editing is not possible.
●
●
“F-1” has been selected as the input
mode.
Set to the desired channel.
The source (another video recorder,
camcorder) has not been properly
connected.
Confirm that the source is properly
connected.
●
All necessary power switches have not
been turned on.
Confirm that all units’ power switches are
turned on.
●
●
The input mode is not correct.
Set the input mode to “F-1”.
4. Camcorder recording is not possible.
The camcorder has not been properly
connected.
Confirm that the camcorder is properly
connected.
●
The input mode is not correct.
Set the input mode to “F-1”.
5. “⅜” and “$” on the front display
● The end of the tape was reached during The program may not have been recorded
panel won’t stop blinking.
recording.
in its entirety. Next time make sure you
have enough time on the tape to record
the entire program.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
EN
TROUBLESHOOTING (cont.)
TIMER RECORDING (VCR deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Timer recording won’t work.
● The clock and/or the timer have been
set incorrectly.
Re-perform the clock and/or timer
settings.
● The timer is not engaged.
Press TIMER and confirm that “#” is
displayed on the front display panel.
2. Timer programming is not possible.
● Timer recording is in progress.
Timer programming can’t be performed
while a timer recording is in progress.
Wait until it finishes.
3. “#” on the front display panel won’t
● The timer is engaged but there’s no
cassette loaded.
Load a cassette with the record safety tab
intact.
stop blinking.
● The loaded cassette has had its record
safety tab removed.
Remove the cassette and cover the hole
with adhesive tape, or insert a cassette
with the record safety tab intact.
4. “#”, “⅜” and “$” on the front
● The end of the tape was reached during The program may not have been recorded
display panel won’t stop blinking.
timer recording.
in its entirety. Next time make sure you
have enough time on the tape to record
the entire program.
5. “#” blinks for 10 seconds and the
● TIMER has been pressed when there are Check the programmed data and re-
Timer mode is disengaged.
no programs in memory, or the timer
record information has been
programmed incorrectly.
program as necessary, then press TIMER
again.
6. “⅜” and “$” on the front display
● The end of the tape was reached during The program may not have been recorded
panel won’t stop blinking.
Instant Timer Recording.
in its entirety. Next time make sure you
have enough time on the tape to record
the entire program.
7. “N”, “⅜” and “$” on the front display ● The Satellite Auto Recording mode is
panel won’t stop blinking.
Load a cassette with the record safety tab
engaged but there is no cassette loaded. intact.
● The loaded cassette has had its record
safety tab removed.
Remove the cassette and cover the hole
with adhesive tape, or insert a cassette
with the record safety tab intact.
● The end of the tape was reached during The program may not have been recorded
Satellite Auto Recording.
in its entirety. Next time make sure you
have enough time on the tape to record
the entire program.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
83
OTHER PROBLEMS
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. The image of TV broadcast appears
distorted on the TV screen.
● The unit leaves turned on and the DVD Turn off the unit, or press VCR to select
deck is selected.
the VCR deck, then press TV/VCR so that
the VCR indicator disappears from the
front display panel.
2. Whistling or howling is heard from the ● The camcorder’s microphone is too
Position the camcorder so its microphone
is away from the TV.
TV during camcorder recording.
close to the TV.
● The TV’s volume is too high.
Turn the TV’s volume down.
3. When scanning channels, some of
them are skipped over.
● Those channels have been designated
to be skipped.
If you need the skipped channels, restore
them. (੬ pg. 25)
4. The channel cannot be changed.
● Recording is in progress.
Press PAUSE (9) to pause the recording,
change channels, then press PLAY (4) to
resume recording.
5. Channel settings that were made
manually seem to have changed or
disappeared.
● After the manual settings were made,
Auto Channel Set was performed.
Perform manual setting again.
6. Even though Auto or Semiauto Clock
Set has been performed, the clock is
incorrect.
● The clock setting data received from the Select a different host channel during
host channel is incorrect.
“Semiauto Clock Set” (੬ pg. 23), or
perform “Manual Clock Set” (੬ pg. 23).
ATTENTION
This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the
unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the cassette. After checking the
cassette, operate the unit as usual.
Tray Lock
You can lock the disc tray to prohibit the unwanted disc ejection by children.
To lock the disc tray.
While the unit is turned off, press and hold 8, then press x on the unit. “LOCK” appears on the front display panel and the disc
tray is locked.
To unlock tray
While the unit is turned off, press and hold 8, then press x on the unit. “UNLOCK” appears on the display panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
EN
QUESTIONS AND ANSWERS
PLAYBACK
TIMER RECORDING
Q. What happens if the end of the tape is reached
during playback or search?
A. The tape is automatically rewound to the
beginning.
Q. “⅜” and “#” remain lit on the front display
panel. Is there a problem?
A. No. This is a normal condition for a timer
recording in progress.
Q. During search, slow, still and frame-by-frame
playback, I can’t hear any audio. What’s the
problem?
Q. Can I program the timer while I’m watching a
tape or a TV broadcast?
A. You won’t see the picture as it is replaced by the
on-screen menu, but the audio from the
program or tape you’re viewing can be heard.
A. This is normal.
Q. Can the unit indefinitely remain in the still
mode?
A. No. It stops automatically after 5 minutes to
protect the heads.
Q. When returning from search to normal
playback, the picture is disturbed. Should I be
concerned about this?
A. No, it is normal.
Q. Noise bar appear during search. What’s the
problem?
A. This is normal.
Q. Sometimes, during Index Search, the unit can’t
find the program I want to see. Why not?
A. There may be index codes too close together.
RECORDING
Q. When I pause and then resume a recording, the
end of the recording before the pause is
overlapped by the beginning of the
continuation of recording. Why does this
happen?
A. This is normal. It reduces distortion at the pause
and resume points.
Q. Can the unit indefinitely remain in the Record-
Pause mode?
A. No. The unit goes to its Stop mode
automatically after 5 minutes to protect the
heads.
Q. What happens if the tape runs out during
recording?
A. The unit stops recording, and “⅜” and “$” on
the front display panel won’t stop blinking.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
85
SPECIFICATIONS
GENERAL
TUNER
Power requirement : AC 110 - 220 Vd, 50 Hz/60 Hz
Power consumption
Tuning system
Channel coverage
VHF
: Frequency synthesized tuner
Power on
Power off
: 23 W
: 5.2 W
: Channels 2 – 13
: Channels 14 – 69
: 113 Channels
: Channel 3 or 4 (switchable; preset
to Channel 3 when shipped)
75 ohms, unbalanced
UHF
Temperature
Operating
Storage
CATV
RF output
: 5°C to 40°C (41°F to 104°F)
: –20°C to 60°C (–4°F to140°F)
Operating position : Horizontal only
Dimensions (WxHxD)
: 435 mm x 93 mm x 272 mm
: 4.1 kg
: VHS NTSC standard
TIMER
Clock reference
Program capacity : 1-year programmable timer/
8 programs
Memory backup time
Weight
Format
: Quartz
Maximum recording time
(SP)
: 210 min. with ST-210 video
cassette
: 630 min. with ST-210 video
cassette
: Approx. 5 seconds
(EP)
ACCESSORIES
Provided accessories : RF cable,
Infrared remote control unit,
“AA” battery x 2,
VIDEO/AUDIO (VCR deck)
Signal system : NTSC color signal and EIA
monochrome signal, 525 lines/60
fields
Conversion Plug
Recording system : DA4 (Double Azimuth) head helical
scan system
Specifications shown are for SP mode unless otherwise
specified.
Signal-to-noise ratio: 45 dB
E.& O.E. Design and specifications subject to change without
notice.
Horizontal resolution
: 230 lines
Frequency range : 70 Hz to 10,000 Hz (Normal audio)
20 Hz to 20,000 Hz (Hi-Fi audio)
Input/Output
: RCA connectors:
IN x 1, OUT x 1
VIDEO/AUDIO (DVD deck)
Signal system
: NTSC
: DVD (12 cm, 8 cm)
CD (12 cm, 8 cm)
Applicable disc
Audio characteristics
DVD
: 4 Hz – 22 KHz
Frequency response
CD
: 4 Hz – 20 KHz
: 90 dB
S/N Ratio
Harmonic distortion
: 0.1 %
Wow and flutter
Dynamic range
Output
: Below Measurable Level
: 90 dB
Component-Y : (RCA) 1.0 Vp-p/75 ohm
Component-P /P
B
R
: (RCA) 0.7 Vp-p/75 ohm
: (RCA) 2 Vrms, 1 Kohm
Audio
Digital Audio : (COAXIAL) 0.5 Vp-p/75 ohm
Download from Www.Somanuals.com. All Manuals Search And Download.
86
EN
LIST OF TERMS
A
L
A-B Repeat Playback ............................................ 49
Language ............................................................18
Language Code List ..........................................21
Menu/Audio/Subtitle Language Set
(DVD deck only) ........................................20
On-screen Language Set (DVD deck) .................19
On-screen Language Set (VCR deck) ..................18
Letter Box ............................................................17
Locating the start point of the item or skip the item ....42
About Discs
JPEG .............................................................. 63
MP3 .............................................................. 60
Placing a Disc .................................................. 7
Playable Discs .................................................. 5
Region Number ................................................ 5
Unplayable Discs .............................................. 5
Angle Selection .................................................... 53
Audio Channel Selection ....................................... 55
Audio Language Selection ..................................... 54
Auto Channel Set ................................................. 24
M
Manual Channel Set ..............................................25
Manual Clock Set .................................................23
Manual Tracking ..................................................30
Mode Set (DVD deck)
C
Chapter Search .................................................... 51
Check, cancel and change programs ....................... 36
Child Lock .......................................................... 78
Clock Set ............................................................ 22
Component Video Connection ............................... 14
Connecting To A Dolby Digital Decoder or
AUDIO LANGUAGE .......................................20
D. RANGE COMPRESSION ..............................77
DIGITAL AUDIO OUT .....................................76
DOWN MIX ...................................................77
FILE TYPE .......................................................76
MENU LANGUAGE .........................................20
MONITOR TYPE ....................................... 17, 76
ON SCREEN GUIDE ........................................78
ON SCREEN LANGUAGE .................................19
PICTURE SOURCE ..........................................76
RESUME ........................................................78
SCREEN SAVER ...............................................76
SUBTITLE .......................................................20
Mode Set (VCR deck)
An Amplifier With A Built-in DTS ...................... 71
D
Digital Audio Dubbing .......................................... 69
Disc menu .......................................................... 41
Dubbing (from DVD to VCR) ................................. 68
E
EDITING (DVD DECK)
2ND AUDIO RECORD ....................................74
AUDIO MONITOR ..........................................74
AUTO POWER OFF ........................................74
AUTO SP]EP TIMER ......................................73
BLUE BACK ....................................................74
PICTURE CONTROL ........................................73
SUPERIMPOSE ................................................73
VIDEO STABILIZER .........................................74
MP3 control display ..............................................60
Digital Audio Dubbing ..................................... 69
EDITING (VCR DECK)
Dubbing (from DVD to VCR) ............................ 68
Edit From A Camcorder .................................... 66
Edit To Or From Another Video Recorder ........... 67
Elapsed Recording Time Indication ......................... 33
Express Timer Programming ................................... 34
G
Group/file selection .............................................. 65
Group/track selection ........................................... 62
N
Next Function Memory .........................................29
I
O
INDEX .................................................................. 8
Index Search ........................................................ 28
Instant ReView ..................................................... 28
Instant Timer Recording (ITR) ................................. 32
OPERATIONS ON DVD DECK ........................40 – 65
OPERATIONS ON VCR DECK .........................26 – 39
J
JPEG control display ............................................. 63
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
87
P
T
Pan&Scan ........................................................... 17
Parental Lock
Tape Position Indicator ..........................................10
Tape Remaining Time ...........................................33
Time Search .........................................................50
Timer Recording ............................................34 – 39
Top menu ............................................................41
Tuner Set .............................................................24
Country/Area Code List .................................... 58
To change the settings ..................................... 57
To set Parental Lock for the first time .................. 56
To temporarily release the Parental Lock ............ 57
Playback (DVD deck) .................................... 40 – 59
Playback (JPEG) ............................................ 64 – 65
Playback (MP3) ............................................. 61 – 62
Playback (VCR deck) ..................................... 26 – 30
Playback Control (PBC) Function .......................41, 50
Plug&Play Set ...................................................... 15
V
Variable Speed Search .....................................27, 42
VFP function ........................................................45
W
When programs overlap each other .........................38
R
Z
Record One Program While Watching Another ........ 32
Recording .................................................... 31 – 33
Recording Resume Function .................................. 31
Region Number ..................................................... 5
Remote Control Functions ..................................... 70
Repeat Playback ................................. 29, 48, 62, 65
Resume Function ................................................. 43
Zooming ....................................................... 43, 65
3D Phonic ...........................................................44
S
Satellite Auto Recording ........................................ 39
Scan Mode Set (DVD deck) ................................... 78
Second Audio Recording ....................................... 33
Semiauto Clock Set ............................................... 23
Skip Search ......................................................... 28
Slow Motion ...................................................27, 43
Soundtrack Selection ............................................ 30
Still Picture/Frame-By-Frame Playback ...............27, 43
Subtitle Selection ................................................. 52
S-VIDEO Connection ............................................ 13
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in China
0604CSH-SW-BJ
UJ
COPYRIGHT© 2004 VICTOR COMPANY OF JAPAN, LTD.
Download from Www.Somanuals.com. All Manuals Search And Download.
|