Intel Computer Hardware 865G User Manual

IB865  
LGA775 Pentium 4  
Intel 865G Chipset  
Full Size CPU Card  
USER’S MANUAL  
Version 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Introduction....................................................... 1  
Checklist .......................................................................... 1  
Product Description .......................................................... 2  
Specifications ................................................................... 3  
Board Dimensions............................................................. 4  
Installations....................................................... 5  
Installing the CPU ............................................................ 6  
ATX Power Installation .................................................... 7  
Installing the Memory....................................................... 7  
Setting the Jumpers........................................................... 8  
Connectors on IB865 ...................................................... 17  
Watchdog Timer............................................................. 29  
BIOS Setup...................................................... 31  
Drivers Installation ..................................... 53  
IB865 User’s Manual  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ATTENTION:  
It is strongly recommended that only heatsinks that have corresponding  
(metal) backplates are used on the CPU card. This is to avoid the CPU  
card being bent/distorted, causing the CPU card to become damaged. A  
reference picture of a backplate and heatsink that has backplate are  
shown below.  
iv  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Introduction  
Checklist  
Your IB865 Pentium 4CPU card package should include the items listed  
below:  
·
·
·
·
·
·
·
The IB865 CPU Card  
This User’s Manual  
1 IDE Ribbon Cable  
1 Floppy Ribbon Connector  
SATA Power Cord  
SATA Cable  
2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a  
Mounting Bracket  
·
·
1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse  
1 CD containing the following:  
·
·
Chipset Drivers  
Flash Memory Utility  
·
·
·
Optional audio cable with bracket (Audio8K)  
Optional USB cable with bracket (USB2K-4)  
Optional Secondary CRT VGA cable with bracket (VGA4K, for  
use with IBA110)  
·
Optional TMDS cable with bracket (ID120P, for use with  
IBA110)  
·
·
Optional TV-out cable (TVOUT-6, for use with IBA120)  
Optional MicroAGP cards (IBA120, IBA110)  
IB865 User’s Manual  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Product Description  
The IB865 Pentium 4 CPU card incorporates the Intel 865G chipset that  
can utilize a LGA775 processor of up to 3.8GHz or higher and supports  
FSB frequency of 533/800Mhz (133Mhz, and 200Mhz HCLK  
respectively).  
The 865G chipset comes with a Graphics Memory Controller Hub  
(GMCH) designed for use with the Pentium 4 processor with 1MB L2  
cache on 0.09 micron process. The GMCH component provides the CPU  
interface, DDR interface, AGP interface, Hub Interface, and integrated  
graphics with display interfaces.  
Aside from CRT support, the VGA function feature a Micro AGP slot  
for optional daughter cards:  
IBA120: with Chrontel CH7017 chipset that supports dual channel  
LVDS, TV-out interface  
IBA110: with ATI M7CSP32, M9CSP64 / M10CSP64 chipset,  
64MB/32MB frame buffer and supports dual channel LVDS  
interface, TMDS and CRT2 display function.  
The board also has one Intel 82547GI Gigabit LAN and an Intel 82551  
10/100MB fast Ethernet LAN.  
Other advanced features include two Serial ATA ports, four USB 2.0  
ports, IrDA interface and audio function.  
2
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Specifications  
Product Name  
CPU Type  
CPU Voltage  
System Speed  
IB865  
LGA775 socket (Intel Pentium 4 / Celeron D)  
0.8375V~1.6V (VRD 10.1)  
2.53GHz~3.8GHz  
CPU  
Operating 533MHz/800MHz  
Frequency  
Green /APM  
CPU Socket  
Chipset  
APM1.2  
LGA 775 Socket  
Intel 865G Chipset  
GMCH: 82865G 932-pin FC-BGA, ICH5: 82801EB  
460-pin MBGA, FWH  
BIOS  
Cache  
MicroAGP Socket  
VGA  
Award BIOS; support ACPI Function  
256K/1M Level 2 (CPU integrated)  
Two selection: IBA110 or IBA120 Micro AGP card  
Two selection :  
1. 82865G built-in VGA, AGP 4X, supports with CRT +  
IBA120: CH7017, for LVDS dual channel or TV-OUT.  
2. MicroAGP card: IBA110: ATI Mobility M7/M9/M10  
graphics controller, embedded 32/64MB Frame buffer  
(DDR), AGP 4X/8X, for CRT, LVDS, TMDS, 2nd CRT  
Intel 82551QM LAN controller (10/100Mb)  
Intel 82547GI (10/100/1000Mb) Gigabit LAN (optional)  
ICH5 Built-in Sound controller + AC97 Codec ALC655  
support AC3 5.1 channel, 2x6 12-pin header  
2 x DDR 2.5V DDR333/400 SDRAM( without ECC  
Function) DIMM Module, Max. capacity - 2GB  
Winbond 83627HF: IrDAx1, Parallel x1, COM1  
(RS-232), COM2 (RS-232/RS422/RS485), FDC 1.44MB,  
Hardware monitor (3 thermal inputs, 6 voltage monitor  
inputs, VID0-4, 1 chassis open detection, 3 fan headers)  
ICH5 built-in  
Primary LAN  
Secondary LAN  
Audio  
Memory type  
LPC I/O  
RTC/CMOS  
Local bus IDE  
Serial ATA  
ICH5 built-in, IDE1, 2 (Ultra DMA 33/66/100)  
2 ports  
D-type Connectors  
Power Connector  
PCI to ISA Bridge  
ISA High Drive  
USB  
PS/2 keyboard/mouse, VGA (CRT), RJ-45 x 2  
ATX 12V  
ITE 8888  
Yes, SN74ABT16245  
4 x USB 2.0  
Watchdog Timer  
System Voltages  
Other Features  
Form Factor  
Yes ( 256 segments : 0, 1, 2,...255 sec/min)  
+5V, +12V, -12V, 5VSB  
Modem Wakeup, LAN Wakeup, DiskOnChip, IrDA  
PICMG (full size CPU card)  
Board Size  
122 x 338 mm  
IB865 User’s Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Board Dimensions  
4
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Installations  
This section provides information on how to use the jumpers and  
connectors on the IB865 in order to set up a workable system. The topics  
covered are:  
Installing the CPU ............................................................ 6  
ATX Power Installation .................................................... 7  
Installing the Memory....................................................... 7  
Setting the Jumpers........................................................... 8  
Connectors on IB865 ...................................................... 17  
IB865 User’s Manual  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Installing the CPU  
The IB865 CPU card supports a LGA 775 processor socket for Intel®  
Pentium® 4 processors.  
The LGA 775 processor socket comes with a lever to secure the  
processor. Refer to the pictures below, from left to right, on how to place  
the processor into the CPU socket. Please note that the cover of the  
LGA775 socket must always be installed during transport to avoid  
damage to the socket.  
6
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
ATX Power Installation  
The system power is provided to the CPU card with theCN1 and J7 ATX  
power connectors. Please note that the J7 external ATX power connector  
should be connected to the backplane for IB865 to function. J7 is a 3-pin  
power connector. CN1 is a 4-pin 12V power connector. CN1 is to be  
connected to the ATX power supply.  
Installing the Memory  
The IB865 CPU card supports two DDR memory sockets for a maximum  
total memory of 2GB in DDR memory type. You can install unbuffered  
& non-ECC DDR DIMMs. It supports DDR266/333 when installed with  
CPUs that have clock speeds of 533MHz. It supports DDR266/320/400  
when installed with CPUs that have clock speeds of 800MHz. The board  
provides dual channel functionality for its DIMM slots. DIMM1 is for  
one channel and DIMM2 is for the other channel. Enabling dual  
channels can increase data access rates.  
Basically, the system memory interface has the following features:  
Supports two 64-bit wide DDR data channels  
Available bandwidth up to 3.2GB/s (DDR400) for single-channel  
mode and 6.4GB/s (DDR400) in dual-channel mode.  
Supports non ECC DIMMs.  
Supports 128Mb, 256Mb, 512Mb DDR technologies.  
Supports only x8, x16, DDR devices with four banks  
Registered DIMMs not supported  
Supports opportunistic refresh  
Up to 16 simultaneously open pages (four per row, four rows  
maximum)  
IB865 User’s Manual  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Setting the Jumpers  
Jumpers are used on IB865 to select various settings and features  
according to your needs and applications. Contact your supplier if you  
have doubts about the best configuration for your needs. The following  
lists the connectors on IB865 and their respective functions.  
Jumper Locations on IB865..........................................................9  
JP1: Clear CMOS Contents........................................................10  
JP2, JP3, JP4: RS232/422/485 (COM2) Selection ......................10  
JP5/6/7/8/9/10/11: CRT VGA Signal Select...............................10  
JP13: Primary LAN Enable/Disable...........................................11  
JP14: DiskOnChip Address Select .............................................11  
Jumper and Connectors on IBA120............................................12  
J1: Panel Inverter Power Connector ...........................................12  
JP2: Panel Voltage Setting.........................................................12  
J4: TV out Connector.................................................................12  
JP1: TV Type Select...................................................................13  
JP2: LVDS Panel Power Select ..................................................13  
J2, J3: LVDS Connectors (2nd channel, 1st channel).................13  
Jumper and Connectors on IBA110............................................14  
J1: TMDS Panel Connector........................................................14  
J2: CRT2 / TV-Out Connector ...................................................14  
J3: Panel Inverter Power Connector ...........................................15  
J4: VGA Chipset Fan Power Connector .....................................15  
J5, J6: LVDS Connectors (2nd channel, 1st channel).................15  
JP1: LVDS Panel Power Select ..................................................15  
SW1: LVDS Resolution Select...................................................16  
8
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Jumper Locations on IB865  
JP1: Clear CMOS Contents  
JP2, JP3, JP4: RS232/422/485  
(COM2) Selection  
JP5/6/7/8/9/10/11: CRT VGA  
Signal Select  
JP13: Primary LAN Enable/Disable  
JP14: DiskOnChip Address Select  
Jumper Locations on IB865  
IB865 User’s Manual  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
JP1: Clear CMOS Contents  
Use JP1, a 3-pin header, to clear the CMOS contents. Note that the  
ATX-power connector should be disconnected from the CPU card  
before clearing CMOS.  
JP1  
Setting  
Function  
Pin 1-2  
Short/Closed  
Normal  
Pin 2-3  
Short/Closed  
Clear CMOS  
JP2, JP3, JP4: RS232/422/485 (COM2) Selection  
J4, COM1 is fixed for RS-232 use only.  
J5, COM2 is selectable for RS232, RS-422 and RS-485.  
The following table describes the jumper settings for COM2 selection.  
COM2  
RS-232  
RS-422  
RS-485  
Function  
JP2:  
1-2  
JP2:  
3-4  
JP2:  
5-6  
Jumper  
Setting  
JP3:  
JP3:  
JP3:  
(pin closed) 3-5 & 4-6  
1-3 & 2-4  
1-3 & 2-4  
JP4:  
JP4:  
JP4:  
3-5 & 4-6  
1-3 & 2-4  
1-3 & 2-4  
JP5/6/7/8/9/10/11: CRT VGA Signal Select  
Use these seven 3-pin headers to select the VGA signal either from the  
on board VGA or from the MicroAGP VGA.  
JP5/6/7/8/9/10/11  
Setting  
Function  
Pin 1-2  
Short/Closed  
On board VGA  
Pin 2-3  
Short/Closed  
MicroAGP VGA  
10  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
JP13: Primary LAN Enable/Disable  
JP13 Function  
Enable LAN  
Disable LAN  
JP14: DiskOnChip Address Select  
JP14 Address  
D0000-D7FFF  
D8000-DFFFF (default)  
IB865 User’s Manual  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Jumper and Connectors on IBA120  
J1: Panel Inverter Power Connector  
Pin #  
Signal Name  
+12V  
ENABKL  
Ground  
1
2
3
Remarks: Maximum current is 1A.  
JP2: Panel Voltage Setting  
JP2  
Setting  
Panel Voltage  
Pin 1-2  
Short/Closed  
3.3V  
Pin 2-3  
Short/Closed  
5V  
J4: TV out Connector  
The pin assignments of the TV out connector are as follows:  
Signal Name  
Ground  
Y
Pin Pin Signal Name  
1
3
5
7
2
4
6
8
Ground  
C
NC  
NC  
COMP  
Protect pin  
12  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
JP1: TV Type Select  
JP1  
Setting  
TV Type  
Pin 1-2  
Short/Closed  
NTSC  
Pin 2-3  
Short/Closed  
PAL  
JP2: LVDS Panel Power Select  
JP2  
Setting  
Panel Voltage  
Pin 1-2  
Short/Closed  
3.3V (default)  
Pin 2-3  
Short/Closed  
5V  
J2, J3: LVDS Connectors (2nd channel, 1st channel)  
The LVDS connectors, DF13 20-pin mating connectors, are composed  
of the first channel (J2) and second channel (J3) to support 24-bit or  
48-bit.  
Signal Name Pin # Pin #  
Signal Name  
TX0+  
TX0-  
Ground  
TX1-  
2
4
6
1
3
5
Ground  
TX1+  
5V/3.3V  
TX3-  
TX2-  
Ground  
TXC-  
5V/3.3V  
+12V  
8
7
9
Ground  
TX3+  
TX2+  
Ground  
TXC+  
ENABKL  
+12V  
10  
12  
14  
16  
18  
20  
11  
13  
15  
17  
19  
Remarks: Maximum current for +12V is 1A.  
IB865 User’s Manual  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Jumper and Connectors on IBA110  
J1: TMDS Panel Connector  
TMDS stands Transition Minimized Differential Signaling.  
Signal Name Pin # Pin #  
Signal Name  
TX1P  
TXIN  
GND  
GND  
TXCP  
TXCN  
GND  
+5v  
1
2
3
4
5
6
7
8
9
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
TX2P  
TX2N  
GND  
GND  
TX0P  
TX0N  
NC  
NC  
J1  
HTPG  
NC  
DDCDATA  
DDCCLK  
10  
J2: CRT2 / TV-Out Connector  
This connectoris used fora second CRT monitor or use with a TV output device.  
Signal Name Pin # Pin #  
Signal Name  
+5V  
Ground  
N. C.  
CRT2 DDCDAT  
HSYNC  
VSYNC  
CRT2 DDCCLK  
N.C.  
Red / C  
Green / Y  
Blue / COMP  
N.C.  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
Ground  
Ground  
J2  
Ground  
Ground  
14  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
J3: Panel Inverter Power Connector  
The connector supports 1A current (maximum).  
Pin #  
Signal Name  
+12V  
1
2
3
NC  
Ground  
J4: VGA Chipset Fan Power Connector  
Pin #  
1
2
Signal Name  
+12V  
Ground  
J5, J6: LVDS Connectors (2nd channel, 1st channel)  
The LVDS connectors, DF13 20-pin mating connectors, are composed  
of the first channel (J6) and second channel (J5) to support 24-bit or  
48-bit.  
Signal Name Pin # Pin #  
Signal Name  
TX0+  
TX0-  
Ground  
TX1-  
2
4
6
1
3
5
Ground  
TX1+  
5V/3.3V  
TX3-  
TX2-  
Ground  
TXC-  
5V/3.3V  
+12V  
8
7
9
Ground  
TX3+  
TX2+  
Ground  
TXC+  
ENABKL  
+12V  
10  
12  
14  
16  
18  
20  
11  
13  
15  
17  
19  
Remarks: Maximum current for +12V is 1A.  
JP1: LVDS Panel Power Select  
JP1  
Setting  
Panel Voltage  
Pin 1-2  
Short/Closed  
3.3V (default)  
Pin 2-3  
Short/Closed  
5V  
IB865 User’s Manual  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
SW1: LVDS Resolution Select  
SW1-1  
OFF  
ON  
SW1-2  
ON  
OFF  
OFF  
SW1-3  
ON  
ON  
Resolution  
800x600 18 bit  
1024x768 18bit  
1024x768 24 bit  
OFF  
ON  
16  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
[
Connectors on IB865  
The connectors on IB865 allows you to connect external devices such as  
keyboard, floppy disk drives, hard disk drives, printers, etc. The  
following table lists the connectors on IB865 and their respective  
functions.  
Connector Locations on IB865 .................................................. 18  
IDE1, IDE2: EIDE Connectors.................................................. 20  
FDD1: Floppy Drive Connector................................................. 20  
CN1: ATX 12V/+12V Power Connector ................................... 20  
CN2, CN3: USB Connectors ..................................................... 21  
J3: CPU Fan Power Connector .................................................. 21  
J7: External ATX Power Connector .......................................... 21  
J8, J9: System Fan Power Connector ......................................... 21  
J1: System Function Connector ................................................. 22  
J2: Parallel Port Connector........................................................ 24  
J4, J5: COM1 and COM2 Serial Ports Connector ...................... 24  
J10: Wake On LAN Connector.................................................. 25  
J11: External Audio Connector ................................................. 25  
J12: CD-In Audio Connector..................................................... 25  
J13, J14: Serial ATA (SATA) Connectors................................. 25  
J15: VGA CRT Connector......................................................... 26  
J16, J18: External PS/2 Keyboard and Mouse Connector........... 26  
J17: IrDA Connector ................................................................. 26  
J19: PS/2 Keyboard and Mouse Connector ................................ 27  
J20: Primary RJ45 Connector .................................................... 27  
J21: Gigabit LAN RJ45 Connector ............................................ 27  
AGP1: MicroAGP Connector (for IBA110 / IBA120)................ 27  
IB865 User’s Manual  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Connector Locations on IB865  
Connector Locations on IB865:  
IDE1, IDE2: EIDE Connectors  
FDD1: Floppy Drive Connector  
CN1: ATX 12V/+12V Power  
Connector  
CN2, CN3: USB Connectors  
J3: CPU Fan Power Connector  
J7: External ATX Power Connector  
J8, J9: System Fan Power Connector  
J1: System Function Connector  
J2: Parallel Port Connector  
J4, J5: COM1 and COM2 Serial Ports  
Connector  
J10: Wake On LAN Connector  
J11: External Audio Connector  
J12: CD-In Audio Connector  
J13, J14: Serial ATA (SATA)  
Connectors  
J15: VGA CRT Connector  
J16, J18: External PS/2 Mouse and  
Keyboard Connector  
J17: IrDA Connector  
J19: PS/2 Keyboard and Mouse  
Connector  
J20: Primary RJ45 Connector  
J21: Gigabit LAN RJ45 Connector  
AGP1: MicroAGP Connector (for  
IBA110 / IBA120)  
18  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
IDE1, IDE2: EIDE Connectors  
Signal Name  
Pin #  
Pin #  
Signal Name  
Reset IDE  
Host data 7  
Host data 6  
Host data 5  
Host data 4  
Host data 3  
Host data 2  
Host data 1  
Host data 0  
Ground  
1
2
Ground  
Host data 8  
Host data 9  
Host data 10  
Host data 11  
Host data 12  
Host data 13  
Host data 14  
Host data 15  
Protect pin  
Ground  
3
4
5
6
7
8
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
DRQ0  
Host IOW  
Host IOR  
IOCHRDY  
DACK0  
Ground  
Ground  
Host ALE  
Ground  
IRQ14  
No connect  
No connect  
Address 2  
Chip select 1  
Ground  
Address 1  
Address 0  
Chip select 0  
Activity  
IDE1  
Signal Name  
Reset IDE  
Host data 7  
Host data 6  
Host data 5  
Host data 4  
Host data 3  
Host data 2  
Host data 1  
Host data 0  
Ground  
Pin #  
1
Pin #  
2
Signal Name  
Ground  
3
4
Host data 8  
Host data 9  
Host data 10  
Host data 11  
Host data 12  
Host data 13  
Host data 14  
Host data 15  
Protect pin  
Ground  
Ground  
Ground  
Host ALE  
Ground  
5
6
8
7
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
DRQ1  
Host IOW  
Host IOR  
IOCHRDY  
DACK1  
IRQ15  
No connect  
No connect  
Address 2  
Chip select 1  
Ground  
IDE2  
Address 1  
Address 0  
Chip select 0  
Activity  
IB865 User’s Manual  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
FDD1: Floppy Drive Connector  
FDD1 is a 34-pin header and will support up to 2.88MB floppy drives.  
Signal Name Pin # Pin #  
Signal Name  
RM/LC  
No connect  
No connect  
Index  
Motor enable 0  
Drive select 1  
Drive select 0  
Motor enable 1  
Direction  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
1
3
5
7
2
4
6
8
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
Step  
Write data  
Write gate  
Track 00  
Write protect  
Read data  
FDD1  
Side 1 select  
Diskette change  
CN1: ATX 12V/+12V Power Connector  
Pin #  
Signal Name  
Ground  
Ground  
+12V  
1
2
3
4
+12V  
20  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
CN2, CN3: USB Connectors  
The following table shows the pin outs of the USB pin headers  
connectors. Overall, the two pin headers support four USB ports.  
Signal Name Pin Pin Signal Name  
Vcc  
1
2
3
4
5
6
7
8
Ground  
USB1+  
USB1-  
Vcc  
USB0-  
USB0+  
Ground  
CN2  
Signal Name Pin Pin Signal Name  
Vcc  
1
2
3
4
5
6
7
8
Ground  
USB3+  
USB3-  
Vcc  
USB2-  
USB2+  
Ground  
CN3  
J3: CPU Fan Power Connector  
J3 is a 3-pin header for the CPU fan. The fan must be a 12V fan.  
Pin #  
Signal Name  
Ground  
+12V  
Rotation detection  
Control  
1
2
3
4
J7: External ATX Power Connector  
Pin #  
Signal Name  
1
2
3
Ground  
PS-ON (soft on/off)  
5VSB (Standby +5V)  
J8, J9: System Fan Power Connector  
J8 and J9 are 3-pin headers for system fans. The fan must be a 12V fan.  
Pin #  
Signal Name  
Ground  
+12V  
Rotation detection  
1
2
3
IB865 User’s Manual  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
J1: System Function Connector  
J1 provides connectors for system indicators that provide light  
indication of the computer activities and switches to change the  
computer status. J1 is a 20-pin header that provides interfaces for the  
following functions.  
Hard Disk Drive LED  
Reset Switch  
Not Defined  
ATX Power On Switch  
SMI / Hardware Switch  
Power LED  
Speaker  
Speaker: Pins 1 - 4  
This connector provides an interface to a speaker for audio  
tone generation. An 8-ohm speaker is recommended.  
Pin #  
Signal Name  
Speaker out  
No connect  
Ground  
1
2
3
4
+5V  
Power LED: Pins 11 - 15  
The power LED indicates the status of the main power  
switch.  
Pin #  
11  
12  
Signal Name  
Power LED  
No connect  
Ground  
13  
14  
15  
No connect  
Ground  
22  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
SMI/Hardware Switch: Pins 6 and 16  
This connector supports the "Green Switch" on the control  
panel, which, when pressed, will force the system into the  
power-saving mode immediately.  
Signal Name  
SMI  
Pin #  
6
16  
Ground  
ATX Power ON Switch: Pins 7 and 17  
This 2-pin connector is an “ATX Power Supply On/Off  
Switch” on the system that connects to the power switch on  
the case. When pressed, the power switch will force the  
system to power on. When pressed again, it will force the  
system to power off.  
Reset Switch: Pins 9 and 19  
The reset switch allows the user to reset the system without  
turning the main power switch off and then on again.  
Orientation is not required when making a connection to  
this header.  
Hard Disk Drive LED Connector: Pins 10 and 20  
This connector connects to the hard drive activity LED on  
control panel. This LED will flash when the HDD is being  
accessed.  
Pin #  
10  
20  
Signal Name  
HDD Active  
5V  
IB865 User’s Manual  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
J2: Parallel Port Connector  
The following table describes the pin out assignments of this connector.  
Signal Name  
Line printer strobe  
PD0, parallel data 0  
PD1, parallel data 1  
PD2, parallel data 2  
PD3, parallel data 3  
PD4, parallel data 4  
PD5, parallel data 5  
PD6, parallel data 6  
PD7, parallel data 7  
ACK, acknowledge  
Busy  
Pin # Pin # Signal Name  
1
2
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
N/A  
AutoFeed  
Error  
3
4
Initialize  
Select  
5
6
7
8
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
N/A  
9
10  
11  
12  
13  
J2  
Paper empty  
Select  
J4, J5: COM1 and COM2 Serial Ports Connector  
J4 and J5 both 10-pin headers, are the onboard serial port connectors.  
J4  
Pin #  
Signal Name  
Fixed as  
RS-232  
RS-232  
DCD  
RX  
RS-422  
TX-  
TX+  
RX+  
RX-  
GND  
RTS-  
RTS+  
CTS+  
CTS-  
NC  
RS-485  
DATA-  
DATA+  
NC  
NC  
GND  
NC  
NC  
NC  
NC  
NC  
1
2
3
4
5
6
7
8
9
TX  
J5  
DTR  
GND  
DSR  
RTS  
CTS  
RI  
Configurable  
as RS-232/  
RS-422/485  
with jumpers  
JP2/JP3/JP4  
10  
NC  
24  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
J10: Wake On LAN Connector  
J10 is a 3-pin header for the Wake On LAN function on the  
motherboard. The following table shows the pin out assignments of this  
connector. Wake On LAN will function properly only with an ATX  
power supply with 5VSB that has 1A.  
Pin #  
Signal Name  
+5VSB  
Ground  
LAN Wakeup  
1
2
3
J11: External Audio Connector  
J11 is a 12-pin header that is used to connect to the optional audio cable  
that integrates jacks for Line In, Line Out and Mic.  
Signal Name  
Pin #  
Pin #  
Signal Name  
LINEOUT_R  
1
2
LINEOUT_L  
Ground  
3
4
Ground  
LINEIN_R  
Ground  
5
6
LINEIN L  
Ground  
7
8
Mic-In  
9
10  
12  
VREFOUT  
Protect pin  
Ground  
11  
J12: CD-In Audio Connector  
Pin # Signal Name  
1
2
3
4
CD Audio R  
Ground  
Ground  
CD Audio L  
J13, J14: Serial ATA (SATA) Connectors  
The SATA connectors support serial ATA 150. Each connector can only  
use one serial ATA hard disk. J13 is port 1 and J14 is port 2.  
IB865 User’s Manual  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
J15: VGA CRT Connector  
The pin assignments of the J15 VGA CRT connector are as follows:  
Signal Name Pin Pin Signal Name  
Red  
Blue  
1
3
2
4
Green  
N.C.  
GND  
GND  
N.C.  
N.C.  
HSYNC  
NC  
5
7
9
11  
13  
15  
6
8
10  
12  
14  
GND  
GND  
GND  
N.C.  
J15  
VSYNC  
J16, J18: External PS/2 Keyboard and Mouse Connector  
Pin #  
J16  
KB clock  
KB data  
N.C.  
Ground  
Vcc  
J18  
Mouse data  
N.C.  
Ground  
Vcc  
1
2
3
4
5
Mouse clock  
J17: IrDA Connector  
J17 is used for an optional IrDA connector for wireless communication.  
Pin #  
Signal Name  
+5V  
No connect  
Ir RX  
1
2
3
4
5
Ground  
Ir TX  
26  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
J19: PS/2 Keyboard and Mouse Connector  
J19 uses a Y-cable with dual D-connectors for a PS/2 keyboard and a  
PS/2 mouse.  
Pin #  
Signal Name  
Mouse data  
Keyboard data  
Ground  
1
2
3
4
5
6
Vcc  
Mouse Clock  
Keyboard Clock  
J19  
J20: Primary RJ45 Connector  
J20 is the primary RJ-45 connector based on the chipset integrated LAN.  
The figure below shows the pin out assignments of the connector and its  
corresponding input jack.  
J21: Gigabit LAN RJ45 Connector  
J21 is the Gigabit LAN RJ45 connector.  
AGP1: MicroAGP Connector (for IBA110 / IBA120)  
IB865 User’s Manual  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
Watchdog Timer Configuration  
The WDT is used to generate a variety of output signals after a user  
programmable count. The WDT is suitable for use in the prevention of  
system lock-up, such as when software becomes trapped in a deadlock.  
Under these sort of circumstances, the timer will count to zero and the  
selected outputs will be driven. Under normal circumstance, the user  
will restart the WDT at regular intervals before the timer counts to zero.  
SAMPLE CODE:  
This code and information is provided "as is" without warranty of any  
kind, either expressed or implied, including but not limited to the  
implied warranties of merchantability and/or fitness for a particular  
purpose.  
;[]================================================  
; Name : Enable_And_Set_Watchdog  
; IN : AL - 1sec ~ 255sec  
; OUT : None  
;[]================================================  
Enable_And_Set_Watchdog Proc Near  
pushax  
;save time interval  
call Unlock_Chip  
mov cl, 2Bh  
call Read_Reg  
and al, NOT 10h  
call Write_Reg  
;set GP24 as WDTO  
mov cl, 07h  
mov al, 08h  
call Write_Reg  
;switch to LD8  
mov cl, 0F5h  
call Read_Reg  
and al, NOT 08h  
call Write_Reg  
;set count mode as second  
;set watchdog timer  
pop ax  
mov cl, 0F6h  
call Write_Reg  
28  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
mov al, 01h  
mov cl, 30h  
call Write_Reg  
;watchdog enabled  
call Lock_Chip  
ret  
Enable_And_Set_Watchdog Endp  
;[]===============================================  
; Name : Disable_Watchdog  
; IN : None  
; OUT : None  
;[]===============================================  
Disable_Watchdog Proc Near  
call Unlock_Chip  
mov cl, 07h  
mov al, 08h  
call Write_Reg  
;switch to LD8  
xor al, al  
mov cl, 0F6h  
call Write_Reg  
;clear watchdog timer  
;watchdog disabled  
xor al, al  
mov cl, 30h  
call Write_Reg  
call Lock_Chip  
ret  
Disable_Watchdog Endp  
;[]===============================================  
; Name : Unlock_Chip  
; IN : None  
; OUT : None  
;[]===============================================  
Unlock_Chip Proc Near  
mov dx, 2Eh  
mov al, 87h  
out dx, al  
out dx, al  
ret  
Unlock_Chip Endp  
;[]================================================  
IB865 User’s Manual  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIONS  
; Name : Lock_Chip  
; IN : None  
; OUT : None  
;[]================================================  
Unlock_Chip Proc Near  
mov dx, 2Eh  
mov al, 0AAh  
out dx, al  
ret  
Unlock_Chip Endp  
;[]================================================  
; Name : Write_Reg  
; IN : CL - register index  
;
AL - Value to write  
; OUT : None  
;[]================================================  
Write_Reg Proc Near  
pushax  
mov dx, 2Eh  
mov al,cl  
out dx,al  
pop ax  
inc dx  
out dx,al  
ret  
Write_Reg Endp  
;[]================================================  
; Name : Read_Reg  
; IN : CL - register index  
; OUT : AL - Value to read  
;[]===================================================  
Read_Reg  
Proc Near  
mov al, cl  
mov dx, 2Eh  
out dx, al  
inc dx  
in al, dx  
ret  
Read_Reg  
Endp  
;[]================================================  
30  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
BIOS Setup  
This chapter describes the different settings available in the Award  
BIOS that comes with the CPU card. The topics covered in this chapter  
are as follows:  
BIOS Introduction................................................................... 32  
BIOS Setup ............................................................................. 32  
Standard CMOS Setup........................................................... 34  
Advanced BIOS Features ....................................................... 37  
Advanced Chipset Features .................................................... 40  
Integrated Peripherals ............................................................. 43  
Power Management Setup...................................................... 46  
PNP/PCI Configurations ........................................................ 49  
PC Health Status..................................................................... 50  
Frequency/Voltage Control..................................................... 51  
Load Fail-Safe Defaults.......................................................... 52  
Load Setup Defaults ............................................................... 52  
Set Supervisor/User Password............................................... 52  
Save & Exit Setup .................................................................. 52  
Exit Without Saving ............................................................... 52  
IB865 User’s Manual  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
BIOS Introduction  
The Award BIOS (Basic Input/Output System) installed in your  
computer system’s ROM supports Intel Pentium 4 processors. The BIOS  
provides critical low-level support for a standard device such as disk  
drives, serial ports and parallel ports. It also adds virus and password  
protection as well as special support for detailed fine-tuning of the  
chipset controlling the entire system.  
BIOS Setup  
The Award BIOS provides a Setup utility program for specifying the  
system configurations and settings. The BIOS ROM of the system stores  
the Setup utility. When you turn on the computer, the Award BIOS is  
immediately activated. Pressing the <Del> key immediately allows you  
to enter the Setup utility. If you are a little bit late pressing the <Del>  
key, POST (Power On Self Test) will continue with its test routines, thus  
preventing you from invoking the Setup. If you still wish to enter Setup,  
restart the system by pressing the ”Reset” button or simultaneously  
pressing the <Ctrl>, <Alt> and <Delete> keys. You can also restart by  
turning the system Off and back On again. The following message will  
appear on the screen:  
Press <DEL> to Enter Setup  
In general, you press the arrow keys to highlight items, <Enter> to  
select, the <PgUp> and <PgDn> keys to change entries, <F1> for help  
and <Esc> to quit.  
When you enter the Setup utility, the Main Menu screen will appear on  
the screen. The Main Menu allows you to select from various setup  
functions and exit choices.  
32  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Phoenix - AwardBIOS CMOS Setup Utility  
Standard CMOS Features  
Frequency/Voltage Control  
Advanced BIOS Features  
Advanced Chipset Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI Configurations  
PC Health Status  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Save & Exit Setup  
Exit Without Saving  
ESC : Quit  
á â à ß : Select Item  
F10 : Save & Exit Setup  
Time, Date, Hard Disk Type…  
The section below the setup items of the Main Menu displays the control  
keys for this menu. At the bottom of the Main Menu just below the  
control keys section, there is another section, which displays  
information on the currently highlighted item in the list.  
Note:  
If the system cannot boot after making and saving system  
changes with Setup, the Award BIOS supports an override to  
the CMOS settings that resets your system to its default.  
Warning: It is strongly recommended that you avoid making any  
changes to the chipset defaults. These defaults have been  
carefully chosen by both Award and your system  
manufacturer to provide the absolute maximum performance  
and reliability. Changing the defaults could cause the system  
to become unstable and crash in some cases.  
IB865 User’s Manual  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Standard CMOS Setup  
“Standard CMOS Setup” choice allows you to record some basic  
hardware configurations in your computer system and set the system  
clock and error handling. If the CPU card is already installed in a  
working system, you will not need to select this option. You will need to  
run the Standard CMOS option, however, if you change your system  
hardware configurations, the onboard battery fails, or the configuration  
stored in the CMOS memory was lost or damaged.  
Phoenix - AwardBIOS CMOS Setup Utility  
Standard CMOS Features  
Date (mm:dd:yy)  
Time (hh:mm:ss)  
Thu, May 21, 2001  
00 : 00 : 00  
Item Help  
Menu Level  
IDE Channel 0 Master  
IDE Channel 0 Slave  
IDE Channel 1 Master  
IDE Channel 1 Slave  
IDE Channel 2 Master  
IDE Channel 3 Master  
Press Enter 13020 MB  
Press Enter None  
Press Enter None  
Press Enter None  
Change the day, month,  
Year and century  
Drive A  
Drive B  
1.44M, 3.5 in.  
None  
Video  
EGA/VGA  
Halt On  
All , But Keyboard  
Base Memory  
Extended Memory  
Total Memory  
640K  
129024K  
130048K  
At the bottom of the menu are the control keys for use on this menu. If  
you need any help in each item field, you can press the <F1> key. It will  
display the relevant information to help you. The memory display at the  
lower right-hand side of the menu is read-only. It will adjust  
automatically according to the memory changed. The following  
describes each item of this menu.  
Date  
The date format is:  
Day :  
Sun to Sat  
1 to 12  
1 to 31  
Month :  
Date :  
Year :  
1994 to 2079  
To set the date, highlight the “Date” field and use the PageUp/  
PageDown or +/- keys to set the current time.  
34  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Time  
The time format is: Hour : 00 to 23  
Minute : 00 to 59  
Second : 00 to 59  
To set the time, highlight the “Time” field and use the <PgUp>/  
<PgDn> or +/- keys to set the current time.  
IDE Primary HDDs / IDE Secondary HDDs  
The onboard PCI IDE connectors provide Primary and Secondary  
channels for connecting up to four IDE hard disks or other IDE devices.  
Each channel can support up to two hard disks; the first is the “Master”  
and the second is the “Slave”.  
Press <Enter> to configure the hard disk. The selections include Auto,  
Manual, and None. Select Manual’ to define the drive information  
manually. You will be asked to enter the following items.  
CYLS :  
HEAD :  
Number of cylinders  
Number of read/write heads  
PRECOMP : Write precompensation  
LANDZ :  
Landing zone  
SECTOR :  
Number of sectors  
The Access Mode selections are as follows:  
Auto  
Normal(HD < 528MB)  
Large (for MS-DOS only)  
LBA (HD > 528MB and supports  
Logical Block Addressing)  
Remarks: The main board supports two serial ATA ports and are  
represented in this setting as IDE Channel 2 / 3 Master.  
Drive A / Drive B  
These fields identify the types of floppy disk drive A or drive B that has  
been installed in the computer. The available specifications are:  
360KB 1.2MB 720KB 1.44MB 2.88MB  
5.25 in. 5.25 in. 3.5 in.  
3.5 in.  
3.5 in.  
IB865 User’s Manual  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Video  
This field selects the type of video display card installed in your system.  
You can choose the following video display cards:  
EGA/VGA  
For EGA, VGA, SEGA, SVGA  
or PGA monitor adapters. (default)  
Power up in 40 column mode.  
Power up in 80 column mode.  
For Hercules or MDA adapters.  
CGA 40  
CGA 80  
MONO  
Halt On  
This field determines whether or not the system will halt if an error is  
detected during power up.  
No errors  
The system boot will not be halted for any error  
that may be detected.  
All errors  
Whenever the BIOS detects a non-fatal error,  
the system will stop and you will be prompted.  
The system boot will not be halted for a  
keyboard error; it will stop for all other errors  
The system boot will not be halted for a disk  
error; it will stop for all other errors.  
All, But Keyboard  
All, But Diskette  
All, But Disk/Key  
The system boot will not be halted for a key-  
board or disk error; it will stop for all others.  
36  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Advanced BIOS Features  
This section allows you to configure and improve your system and  
allows you to set up some system features according to your preference.  
Phoenix - AwardBIOS CMOS Setup Utility  
Advanced BIOS Features  
CPU Feature  
Press Enter  
Press Enter  
Press Enter  
Disabled  
Enabled  
Enabled  
Enabled  
Floppy  
Hard Disk  
CD-ROM  
Enabled  
Disabled  
Disabled  
On  
ITEM HELP  
Menu Level  
Hard Disk Boot Priority  
CD-ROM Boot Priority  
Virus Warning  
CPU L1 and L2 Cache  
Hyper-threading Technology  
Quick Power On Self Test  
First Boot Device  
Second Boot Device  
Third Boot Device  
Boot Other Device  
Allows you choose  
the VIRUS warning  
feature for IDE Hard  
Disk boot sector  
protection. If this  
function is enabled  
and someone  
attempt to write data  
into this area, BIOS  
will show a warning  
message on screen  
and alarm beep  
Swap Floppy Drive  
Boot Up Floppy Seek  
Boot Up Numlock Status  
Gate A20 Option  
Typematic Rate Setting  
Typematic Rate (chars/Sec)  
Typematic Delay (Msec)  
Security Option  
Fast  
Disabled  
6
250  
Setup  
APIC Mode  
Enabled  
1.4  
Non-OS2  
Yes  
MPS Version Control for OS  
OS Select For DRAM>64MB  
Report No FDD For WIN 95  
Small Logo (EPA) Show  
Enable  
CPU Feature  
Press Enter to configure the settings relevant to CPU Feature.  
Hard Disk / CD-ROM Boot Priority  
This item allows you to set the priority for hard disk boot. When you press enter,  
the selections shows the current hard disks used in your system as well as the  
Bootable Add-in Cardthat is relevant to other boot sources media such as  
SCSI cards and LAN cards.  
Virus Warning  
If this option isenabled, an alarm message will be displayed when trying to write  
on the boot sector or on the partition table on the disk, which is typical of the  
virus.  
CPU L1 and L2 Cache  
Cache memory is additional memory that is much faster than conventional  
DRAM (system memory). CPUs from 486-type on up contain internal cache  
memory, and most, but not all, modern PCs have additional (external) cache  
memory. When the CPU requests data, the system transfers the requested data  
from the main DRAM into cache memory, for even faster access by the CPU.  
These items allow you to enable (speed up memory access) or disable the cache  
function. By default, these items are Enabled.  
IB865 User’s Manual  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Hyper-Threading Technology  
This feature is enabled when your processor supports Hyper-Threading  
Technology. Otherwise, this field will be hidden.  
Quick Power On Self Test  
When enabled, this field speeds up the Power On Self Test (POST) after the  
system is turned on. If it is set to Enabled, BIOS will skip some items.  
First/Second/Third Boot Device  
These fields determine the drive that the system searches first for an  
operating system. The options available include Floppy, LS/ZIP,  
HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, LAN and Disable.  
Boot Other Device  
These fields allow the system to search for an operating system from  
other devices other than the ones selected in the First/Second/Third Boot  
Device.  
Swap Floppy Drive  
This item allows you to determine whether or not to enable Swap Floppy  
Drive. When enabled, the BIOS swaps floppy drive assignments so that  
Drive A becomes Drive B, and Drive B becomes Drive A. By default,  
this field is set to Disabled.  
Boot Up Floppy Seek  
This feature controls whether the BIOS checks for a floppy drive while  
booting up. If it cannot detect one (either due to improper configuration  
or its absence), it will flash an error message.  
Boot Up NumLock Status  
This allows you to activate the NumLock function after you power up the  
system.  
Gate A20 Option  
This field allows you to select how Gate A20 is worked. Gate A20 is a  
device used to address memory above 1 MB.  
Typematic Rate Setting  
When disabled, continually holding down a key on your keyboard will  
generate only one instance. When enabled, you can set the two typematic  
controls listed next. By default, this field is set to Disabled.  
38  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Typematic Rate (Chars/Sec)  
When the typematic rate is enabled, the system registers repeated  
keystrokes speeds. Settings are from 6 to 30 characters per second.  
Typematic Delay (Msec)  
When the typematic rate is enabled, this item allows you to set the time  
interval for displaying the first and second characters. By default, this  
item is set to 250msec.  
Security Option  
This field allows you to limit access to the System and Setup. The default  
value is Setup. When you select System, the system prompts for the User  
Password every time you boot up. When you select Setup, the system  
always boots up and prompts for the Supervisor Password only when the  
Setup utility is called up.  
APIC Mode  
APIC stands for Advanced Programmable Interrupt Controller. The  
default setting is Enabled.  
MPS Version Control for OS  
This option is specifies the MPS (Multiprocessor Specification) version  
for the OS. MPS version 1.4 added extended configuration tables to  
improve support for multiple PCI bus configurations and improve future  
expandability. The default setting is 1.4.  
OS Select for DRAM > 64MB  
This option allows the system to access greater than 64MB of DRAM  
memory when used with OS/2 that depends on certain BIOS calls to  
access memory. The default setting is Non-OS/2.  
Report No FDD For WIN 95  
If you are using Windows 95/98 without a floppy disk drive, select  
Enabled to release IRQ6. This is required to pass Windows 95/98's SCT  
test. You should also disable the Onboard FDC Controller in the  
Integrated Peripherals screen when there's no floppy drive in the system.  
If you set this feature to Disabled, the BIOS will not report the missing  
floppy drive to Win95/98.  
Small Logo (EPA) Show  
The EPA logo appears at the right side of the monitor screen when the  
system is boot up. The default setting is Enabled.  
IB865 User’s Manual  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Advanced Chipset Features  
This Setup menu controls the configuration of the chipset.  
Phoenix - AwardBIOS CMOS Setup Utility  
Advanced Chipset Features  
DRAM Timing Selectable  
CAS Latency Time  
Active to Precharge Delay  
DRAM RAS# to CAS# Delay  
DRAM RAS# Precharge  
Memory Frequency For  
System BIOS Cacheable  
Video BIOS Cacheable  
Memory Hole at 15M-16M  
Delay Prior to Thermal  
AGP Aperture Size (MB)  
Init Display First  
By SPD  
2.5  
6
3
3
ITEM HELP  
Menu Level  
Auto  
Enabled  
Disabled  
Disabled  
16 Min  
128  
Onboard/AGP  
** On-Chip VGA Setting **  
On-Chip VGA  
On-Chip Frame Buffer Size  
Boot Display  
Enabled  
8MB  
CRT + LVDS  
Auto  
Panel Scaling  
Panel Number  
TV Standard  
1024x768 LVDS  
Off  
Video Connector  
TV Format  
Automatic  
Auto  
DRAM Timing Selectable  
This option refers to the method by which the DRAM timing is selected.  
The default is By SPD.  
CAS Latency Time  
You can select CAS latency time in HCLKs of 2/2 or 3/3. The system  
board designer should set the values in this field, depending on the  
DRAM installed. Do not change the values in this field unless you  
change specifications of the installed DRAM or the installed CPU. The  
choices are 2 and 3.  
Active to Precharge Delay  
The default setting for the Active to Precharge Delay is 6.  
DRAM RAS# to CAS# Delay  
This option allows you to insert a delay between the RAS (Row Address  
Strobe) and CAS (Column Address Strobe) signals. This delay occurs  
when the SDRAM is written to, read from or refreshed. Reducing the  
delay improves the performance of the SDRAM.  
40  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
DRAM RAS# Precharge  
This option sets the number of cycles required for the RAS to accumulate  
its charge before the SDRAM refreshes. The default setting for the  
Active to Precharge Delay is 3.  
Memory Frequency For  
This field sets the frequency of the DRAM memory installed. The  
default setting is Auto. The other settings are PC200 and PC266.  
System BIOS Cacheable  
The setting of Enabled allows caching of the system BIOS ROM at  
F000h-FFFFFh, resulting in better system performance. However, if  
any program writes to this memory area, a system error may result.  
Video BIOS Cacheable  
The Setting Enabled allows caching of the video BIOS ROM at  
C0000h-F7FFFh, resulting in better video performance. However, if  
any program writes to this memory area, a system error may result.  
Memory Hole At 15M-16M  
In order to improve performance, certain space in memory can be  
reserved for ISA cards. This memory must be mapped into the memory  
space below 16 MB. The choices are Enabled and Disabled.  
Delay Prior to Thermal  
This field activates the CPU thermal function after the systems boots for  
the set number of minutes. The options are 16Min and 64Min.  
AGP Aperture Size  
The field sets aperture size of the graphics. The aperture is a portion of  
the PCI memory address range dedicated for graphics memory address  
space. Host cycles that hit the aperture range are forwarded to the AGP  
without any translation. The default setting is 128M.  
Init Display First  
This field allows the system to initialize first the VGA on chip or the  
display card on the PCI Slot.  
IB865 User’s Manual  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
On-Chip VGA  
By default, the On-Chip VGA or 865G chipset-integrated VGA is  
Enabled.  
On-Chip Frame Buffer Size  
The On-Chip Frame Buffer Size canbe set us 1MB, 8MB or 16MB. This  
memory is shared with the system memory.  
Boot Display  
Boot Display determines the display output device where the system  
boots. The default setting is LVDS.  
Panel Scaling  
With the default setting of Auto, this item automatically displays the  
resolution of the panel used in the system to ‘full’ screen.  
Panel Number  
By default, this item is set to 1024 x 768 LVDS. If you are using other  
kinds of panel, enter this field to select the one that suits your panel.  
TV Standard  
By default, this item is set to off.  
Video Connector  
By default, this item is set to Automatic.  
TV Format  
By default, this item is set to Auto.  
42  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Integrated Peripherals  
This section sets configurations for your hard disk and other integrated  
peripherals. The first screen shows three main items for user to select.  
Once an item selected, a submenu appears. Details follow.  
Phoenix - AwardBIOS CMOS Setup Utility  
Integrated Peripherals  
Press Enter  
Press Enter  
Press Enter  
ITEM HELP  
Menu Level  
On-Chip Primary IDE Device  
Onboard Device  
SuperIO Device  
Onboard Lan Boot ROM  
Enable  
Phoenix - AwardBIOS CMOS Setup Utility  
OnChip IDE Device  
Enabled  
ITEM HELP  
Menu Level  
IDE Block Mode  
Enabled  
Auto  
Auto  
Auto  
Auto  
Enabled  
Auto  
Auto  
Auto  
Auto  
On-Chip Primary PCI IDE  
IDE Primary Master PIO  
IDE Primary Slave PIO  
IDE Primary Master UDMA  
IDE Primary Slave UDMA  
On-Chip Secondary PCI IDE  
IDE Secondary Master PIO  
IDE Secondary Slave PIO  
IDE Secondary Master UDMA  
IDE Secondary Slave UDMA  
*** On-Chip Serial ATA Setting ***  
Auto  
SATA0 master  
On-Chip Serial ATA  
Serial ATA Port0 Mode  
Seril ATA Port1 Mode  
SATA1 master  
Phoenix - AwardBIOS CMOS Setup Utility  
Onboard Device  
Enabled  
ITEM HELP  
USB 2.0 Controller  
USB Controller  
USB Keyboard Support  
USB Mouse Support  
AC97 Audio  
Enabled  
Disabled  
Disabled  
Menu Level  
Auto  
CSA LAN (Giga-LAN)  
Enable  
IB865 User’s Manual  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Phoenix - AwardBIOS CMOS Setup Utility  
SuperIO Device  
ITEM HELP  
Menu Level  
Onboard FDC Controller  
Onboard Serial Port 1  
Onboard Serial Port 2  
UART Mode Select  
Onboard Parallel Port  
Parallel Port Mode  
Enabled  
3F8/IRQ4  
2F8/IRQ3  
Normal  
378/IRQ7  
SPP  
Power After PWR-Fail  
off  
IDE HDD Block Mode  
This field allows your hard disk controller to use the fast block mode to  
transfer data to and from your hard disk drive.  
OnChip Primary/Secondary PCI IDE  
The integrated peripheral controller contains an IDE interface with  
support for two IDE channels. Select Enabled to activate each channel  
separately.  
IDE Primary/Secondary Master/Slave PIO  
These fields allow your system hard disk controller to work faster.  
Rather than have the BIOS issue a series of commands that transfer to or  
from the disk drive, PIO (Programmed Input/Output) allows the BIOS to  
communicate with the controllerand CPU directly. The system supports  
five modes, numbered from 0 (default) to 4, which primarily differ in  
timing. When Auto is selected, the BIOS will select the best mode.  
IDE Primary/Secondary Master/Slave UDMA  
These fields allow your system to improve disk I/O throughput to  
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and  
Disabled.  
On-Chip Serial ATA  
The default setting of Auto allows the Serial ATA drive to be enabled,  
when the system detects one.  
USB Controller  
By default, this field is set to Enabled.  
USB 2.0 Controller  
By default, this field is set to Disabled. In order to use USB 2.0,  
necessary OS drivers must be installed first.  
44  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
USB Keyboard Support  
By default, this field is set to Disabled.  
USB Mouse Support  
By default, this field is set to Disabled.  
AC97 Audio  
The default setting of the AC97 Audio is Auto.  
CSA LAN (Giga-LAN)  
The default setting of the onboard Gigabit LAN is enabled.  
Onboard FDC Controller  
Select Enabled if your system has a floppy disk controller (FDC)  
installed on the CPU card and you wish to use it. If you install an add-in  
FDC or the system has no floppy drive, select Disabled in this field. This  
option allows you to select the onboard FDD port.  
Onboard Serial/Parallel Port  
These fields allow you to select the onboard serial and parallel ports and  
their addresses. The default values for these ports are:  
Serial Port 1  
Serial Port 2  
Parallel Port  
3F8/IRQ4  
2F8/IRQ3  
378H/IRQ7  
UART Mode Select  
This field determines the UART 2 mode in your computer. The default  
value is Normal. Other options include IrDA and ASKIR.  
Parallel Port Mode  
This field allows you to determine parallel port mode function.  
SPP  
EPP  
ECP  
Standard Printer Port  
Enhanced Parallel Port  
Extended Capabilities Port  
Power After PWR-Fail  
This field refers to the power status (ON/Off) of the system when the  
power returns to the system after power is cut off.  
Onboard Lan Boot ROM  
By default, the on board LAN boot ROM is enabled.  
IB865 User’s Manual  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Power Management Setup  
The Power Management Setup allows you to save energy of your system  
effectively.  
Phoenix - AwardBIOS CMOS Setup Utility  
Power Management Setup  
ATX  
ITEM HELP  
Menu Level  
Menu Level  
Power-Supply Type  
ACPI Function  
Enabled  
User Define  
V/H SYNC+Blank  
Yes  
Power Management  
Video Off Method  
Video Off In Suspend  
Suspend Type  
Stop Grant  
3
Modem Use IRQ  
Suspend Mode  
Disabled  
Disabled  
Instant-Off  
50%  
Disabled  
Disabled  
Disabled  
Disabled  
0
HDD Power Down  
Soft-Off by PWR-BTTN  
CPU THRM-Throttling  
Wake-Up by PCI Card  
Power On by Ring  
Wake Up on CSA Lan  
Resume by Alarm  
Date (of Month) Alarm  
Time (hh:mm:ss) Alarm  
0 : 0 : 0  
** Reload Global Timer Events **  
Primary IDE 0  
Primary IDE 1  
Secondary IDE 0  
Secondary IDE 1  
Enabled  
Enabled  
Enabled  
Enabled  
Enabled  
Enabled  
FDD, COM, LPT Port  
PCI PIRQ[A-D] #  
Power Supply Type  
This field sets the power supply type that is in your system. By default,  
the setting is set to ATX.  
ACPI Function  
Enable this function to support ACPI (Advance Configuration and  
Power Interface).  
46  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Power Management  
This field allows you to select the type of power saving management  
modes. There are four selections for Power Management.  
Min. Power Saving  
Max. Power Saving  
User Define  
Minimum power management  
Maximum power management.  
Each of the ranges is from 1 min. to  
1hr. Except for HDD Power Down  
which ranges from 1 min. to 15 min.  
Video Off Method  
This field defines the Video Off features. There are three options.  
V/H SYNC + Blank  
Default setting, blank the screen and turn  
off vertical and horizontal scanning.  
Allows BIOS to control the video display.  
Writes blanks to the video buffer.  
DPMS  
Blank Screen  
Video Off In Suspend  
When enabled, the video is off in suspend mode. The default setting is  
Yes.  
Suspend Type  
The default setting for the Suspend Type field is Stop Grant.  
Modem Use IRQ  
This field sets the IRQ used by the Modem. By default, the setting is 3.  
Suspend Mode  
When enabled, and after the set time of system inactivity, all devices  
except the CPU will be shut off.  
HDD Power Down  
When enabled, and after the set time of system inactivity, the hard disk  
drive will be powered down while all other devices remain active.  
Soft-Off by PWRBTN  
This field defines the power-off mode when using an ATX power  
supply. The Instant Off mode allows powering off immediately upon  
pressing the power button. In the Delay 4 Sec mode, the system powers  
off when the power button is pressed for more than four seconds or  
enters the suspend mode when pressed for less than 4 seconds.  
IB865 User’s Manual  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
CPU THRM-Throttling  
When the system enters Doze mode, the CPU clock runs only part of the  
time. You may select the percent of time that the clock runs.  
Wake-Up by PCI Cards  
Enable this field to allow wake up function through a PCI card.  
Power On by Ring  
This field enables or disables the power on of the system through the  
modem connected to the serial port or LAN.  
Wake Up On CSA Lan  
Enable this field to allow wake up function through the onboard CSA  
LAN.  
Resume by Alarm  
This field enables or disables the resumption of the system operation.  
When enabled, the user is allowed to set the Date and Time.  
Reload Global Timer Events  
The HDD, FDD, COM, LPT Ports, and PCI PIRQ are I/O events which  
can prevent the system from entering a power saving mode or can  
awaken the system from such a mode. When an I/O device wants to gain  
the attention of the operating system, it signals this by causing an IRQ to  
occur. When the operating system is ready to respond to the request, it  
interrupts itself and performs the service.  
48  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
PNP/PCI Configurations  
This option configures the PCI bus system. All PCI bus systems on the  
system use INT#, thus all installed PCI cards must be set to this value.  
Phoenix - AwardBIOS CMOS Setup Utility  
PnP/PCI Configurations  
No  
ITEM HELP  
Menu Level  
PNP OS Install  
Disabled  
Reset Configuration Data  
Default is Disabled.  
Auto (ESCD)  
Press Enter  
Press Enter  
Resources Controlled By  
IRQ Resources  
Select Enabled to reset  
Extended System  
Configuration Data  
(ESCD) when you exit  
Setup if you have  
installed a new add-on  
and the system  
reconfiguration has  
caused such a serious  
conflict that the OS  
cannot boot  
DMA Resources  
Disabled  
PCI/VGA Palette Snoop  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
INT Pin 1 Assignment  
INT Pin 2 Assignment  
INT Pin 3 Assignment  
INT Pin 4 Assignment  
INT Pin 5 Assignment  
INT Pin 6 Assignment  
INT Pin 7 Assignment  
INT Pin 8 Assignment  
PNP OS Install  
Enable the PNP OS Install option if it is supported by the operating  
system installed. The default value is No.  
Reset Configuration Data  
This field allows you to determine whether to reset the configuration  
data or not. The default value is Disabled.  
Resources Controlled by  
This PnP BIOS can configure all of the boot and compatible devices  
automatically with the use of a use a PnP operating system such as  
Windows 95.  
PCI/VGA Palette Snoop  
Some non-standard VGA display cards may not show colors properly.  
This field allows you to set whether or not MPEG ISA/VESA VGA  
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA  
can work with an MPEG ISA/VESA VGA card. When this field is  
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.  
IB865 User’s Manual  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
PC Health Status  
This section shows the parameters in determining the PC Health Status.  
These parameters include temperatures, fan speeds and voltages.  
Phoenix - AwardBIOS CMOS Setup Utility  
PC Health Status  
ITEM HELP  
CPU Warning Temperature  
Current SystemTemp.  
Current CPU Temp.  
Disabled  
34°C/93°F  
35°C/95°F  
34°C/93°F  
4166 RPM  
5625PM  
Current System Temp.  
CPU FAN Speed  
Chassis FAN1 Speed  
Chassis FAN2 Speed  
0 RPM  
1.63V  
3.37V  
Vcore (V)  
Vcc3(V)  
5.05V  
+5(V)  
12.09V  
(-)12.03V  
3.21V  
+12(V)  
-12(V)  
VBAT  
5.05V  
5VSB(V)  
Shutdown Temperature  
Temperature Warning Beep  
CPU Fan Failure Warning  
Sys FAN Failure Warning  
Aux FAN Failure Warning  
Disabled  
Disabled  
Disabled  
Disabled  
Disabled  
CPU Warning Temperature  
This field allows the user to set the temperature so that when the  
temperature is reached, the system sounds a warning. This function can  
help prevent damage to the system that is caused by overheating.  
Temperatures/Fan Speeds/Voltages  
These fields are the parameters of the hardware monitoring function  
feature of the CPU card. The values are read-only values as monitored by  
the system and show the PC health status.  
Shutdown Temperature  
This field allows the user to set the temperature by which the system  
automatically shuts down once the threshold temperature is reached.  
This function can help prevent damage to the system that is caused by  
overheating.  
Temperature/CPU/Chassis Fan Failure Warning  
When enabled, this field lets the system sounds an audible warning to  
the user that the CPU fan or chassis fan has malfunctioned.  
50  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Frequency/Voltage Control  
This section shows the user how to configure the processor frequency.  
Phoenix - AwardBIOS CMOS Setup Utility  
Frequency/Voltage Control  
Disabled  
Disabled  
ITEM HELP  
Menu Level  
Auto Detect PCI Clk  
Spread Spectrum  
Auto Detect PCI Clk  
This field enables or disables the auto detection of the PCI clock.  
Spread Spectrum  
This field sets the value of the spread spectrum. The default setting is  
Disabled. This field is for CE testing use only.  
IB865 User’s Manual  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS SETUP  
Load Fail-Safe Defaults  
This option allows you to load the troubleshooting default values  
permanently stored in the BIOS ROM. These default settings are  
non-optimal and disable all high-performance features.  
Load Setup Defaults  
This option allows you to load the default values to your system  
configuration. These default settings are optimal and enable all high  
performance features.  
Set Supervisor/User Password  
These two options set the system password. Supervisor Password sets a  
password that will be used to protect the system and Setup utility. User  
Password sets a password that will be used exclusively on the system. To  
specify a password, highlight the type you want and press <Enter>. The  
Enter Password: message prompts on the screen. Type the password, up  
to eight characters in length, and press <Enter>. The system confirms  
your password by asking you to type it again. After setting a password,  
the screen automatically returns to the main screen.  
To disable a password, just press the <Enter> key when you are  
prompted to enter the password. A message will confirm the password to  
be disabled. Once the password is disabled, the system will boot and you  
can enter Setup freely.  
Save & Exit Setup  
This option allows you to determine whether or not to accept the  
modifications. If you type “Y”, you will quit the setup utility and save all  
changes into the CMOS memory. If you type “N”, you will return to  
Setup utility.  
Exit Without Saving  
Select this option to exit the Setup utility without saving the changes you  
have made in this session. Typing “Y” will quit the Setup utility without  
saving the modifications. Typing “N” will return you to Setup utility.  
52  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
Drivers Installation  
This section describes the installation procedures for software and  
drivers under the Windows 98, Windows NT 4.0 and Windows 2000.  
The software and drivers are included with the CPU card. If you find the  
items missing, please contact the vendor where you made the purchase.  
The contents of this section include the following:  
Intel 865G Chipset Software Intallation Utility................ 54  
Intel 865G Chipset Graphics Driver ................................ 57  
Realtek AC97 Codec Audio Driver Installation ............... 59  
Intel PRO LAN Drivers Installation ................................ 60  
IMPORTANT NOTE:  
After installing your Windows operating system (Windows  
98/98SE/ME/2000/XP), you must install first the Intel Chipset Software  
Installation Utility before proceeding with the drivers installation.  
IB865 User’s Manual  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
Intel 865G Chipset Software Intallation Utility  
The Intel 865G Chipset Drivers should be installed first before the  
software drivers to enable Plug & Play INF support for Intel chipset  
components. Follow the instructions below to complete the installation  
under Windows 98/98SE/ME/2000/XP.  
1. Insert the CD that comes with the CPU card and the screen below  
would appear. Click Intel Chipsets and then Intel 865G Chipset Family  
Drivers.  
2. Click Intel 865G Chipset Software Intallation Utility.  
54  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
3. When the Welcome screen appears, click Next to continue.  
4. Click Yes to accept the software license agreement and proceed with  
the installation process.  
IB865 User’s Manual  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
5. On Readme Information screen, click Next to continue the  
installation.  
6. The Setup process is now complete. Click Finish to restart the  
computer and for changes to take effect. When the computer has  
restarted, the system will be able to find some devices. Restart your  
computer when prompted.  
56  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
Intel 865G Chipset Graphics Driver  
The Intel 865G Chipset Family Graphics Drivers come in the CD with  
the CPU card . Follow the instructions below to complete the  
installation under Windows 98/98SE/ME/2000/XP.  
1. Insert the CD that comes with the CPU card and the screen below  
would appear. Click Intel Chipsets and then Intel 865G Chipset Family  
Drivers.  
2. When the Welcome screen appears, click Next to continue.  
IB865 User’s Manual  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
3. Click Yes to accept the software license agreement and proceed with  
the installation process.  
4. The Setup process is now complete. Click Finish to restart the  
computer and for changes to take effect. When the computer has  
restarted, the system will be able to find some devices. Restart your  
computer when prompted.  
58  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
Realtek AC97 Codec Audio Driver Installation  
Follow the steps below to installthe Realtek AC97 Codec Audio Drivers.  
1. Insert the CD that comes with the CPU card and the screen below  
would appear. Click Intel Chipsets, then Intel 865G Chipset Family  
Drivers. Click Realtek AC97 Codec Audio Drivers to start installation.  
2. Click Finish to restart the computer and for changes to take effect. .  
IB865 User’s Manual  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVERS INSTALLATION  
Intel PRO LAN Drivers Installation  
The Intel PRO LAN drivers support both Intel® PRO/100 and  
PRO/1000 drivers. Follow the steps below to complete the installation.  
1. Insert the CD that comes with the CPU card and the screen below  
would appear. Click on LAN Card on the left side to make the LAN  
drivers selection. Click on Intel(R) PRO LAN Drivers.  
2. Click Install Now.  
3. Click Restart to restart the computer and new settings to take effect.  
60  
IB865 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Freezer C 139 UK User Manual
Indesit Washer Dryer XWDE 961480 User Manual
Ionic Pro Air Cleaner TP101M User Manual
Jabra Projector LP 850 User Manual
Jacuzzi Hot Tub DT00 User Manual
JVC Camera Accessories KY F550 User Manual
JVC Car Stereo System GET0139 001A User Manual
JVC Car Stereo System LVT2096 001A User Manual
Kalorik Hot Beverage Maker JK 39380 User Manual
Kenwood GPS Receiver DNX5080EX User Manual