Installation and
User's Guide
IU 661 / 0047
TABLE OF CONTENTS
USER'S MANUAL
TowerFeed 444 for Hewlett-Packard LaserJet 8150 / 8100 / 8000 Printers
TM
TABLE OF CONTENTS
PREFACE
1
3
4
6
UNPACKING
BOX CONTENTS
INSTALLATION
Hardware Installation
Printer Panel Settings
Software Installation
7
9
9
OPERATING
Loading Paper
Reloading Paper
Out of Paper
Paper Jam
11
12
12
12
PAPER QUALITY GUIDELINES
14
APPENDIX A - Printer Specific Notes
APPENDIX B - Tips & Hints
15
16
20
21
23
24
APPENDIX C - Standard Applications
APPENDIX D - Macintosh Environment
APPENDIX E - PCL Paper Selection Commands
APPENDIX F - Troubleshooting
APPENDIX G - Printer Selftest Pages
Configuration Page
Menu Map
26
27
28
29
Event Log Page
APPENDIX H - TowerFeed Selftest
30
31
32
APPENDIX I - Cleaning and Maintenance
APPENDIX J - TowerFeed Specifications
IU 661 / 0047
1
TowerFeedTM for the HP LaserJet 8150/8100/8000
IU 661 / 0047
2
TowerFeedTM for the HP LaserJet 8150/8100/8000
PREFACE
Congratulations! You selected TowerFeed, a superior sheet feeder specifically designed by Rutishauser Data AG
in collaboration with Hewlett-Packard, USA, to extend the paper handling capabilities of the HP LaserJet 8150 /
8100 / 8000.
The TowerFeed Option offers new possibilities. You can
•
•
select from up to 9 different paper types directly from your PC.
print extra copies instead of going to the copier to make copies. You get the better copies and you
Color code copies of documents on color paper help to clearly identify a copy. The color already defines the
addressee and you will save the marking of the copies.
•
realize an attractive alternative to the multi-part forms printed on conventional impact printers. You
will get better copies, raise the flexibility and you can save cost for expensive preprints and chemical papers.
We encourage you to read this manual carefully to ensure correct installation and reliable operation.
While installing TowerFeed, or whenever an unclear situation arises, please also consult the user's manuals of your
HP LaserJet 8150 / 8100 / 8000, your computer system, your application software and your network software.
The name TowerFeed is generic to the TowerFeed family of automatic sheet feeders and is used throughout this
manual. TowerFeed has this model number scheme:
TowerFeed 444/xx.60.1y
Version
1 = International (DIN A4 paper trays)
4 = US (110V, US Letter paper trays)
5 = Swiss (220V, DIN A4 paper trays)
Printer Model
60.1 = HP LaserJet 8150 / 8100 / 8000
Configuration
44 = desktop model, 3 x 500 sheets
66 = floor model, 6 x 500 sheets
TF 444/66.60.11 is an international version with 6 DIN A4 paper trays.
For example:
A plate showing type, designation and serial number is located besides of the power inlet of TowerFeed. Please
refer to this designation and the serial number whenever you call your service organization.
Rutishauser Data AG, Switzerland, reserves the right to make changes to its products or services without
prior notice and without incurring any obligations to incorporate such changes in units or publications
shipped.
Rutishauser shall in no event be liable for incidental or consequential damages arising from the
use of its equipment.
TowerFeed™ is a registered trademark of Rutishauser Data AG.
Windows™ is a registered trademark of Microsoft Corp.
TowerFeed Support Software for Windows is a copyrighted product of Rutishauser.
Other products and brand names mentioned are trademarks or registered trademarks of their respective companies.
IU 661 / 0047
3
TowerFeedTM for the HP LaserJet 8150/8100/8000
UNPACKING
Note:
Prior to delivery, your TowerFeed was thoroughly tested and carefully packaged.
Please check your unit for transportation damage and/or missing parts immediately upon receipt.
It is advisable to get a second person to help you unpack the unit.
Warning:
TowerFeed may weigh up to 57 kilograms (130 pounds) depending on configuration.
To prevent back strain or injury, bend your knees when lifting the unit, and get help if you need
To unpack the TowerFeed unit, proceed as follows:
•
•
Cut the packing strips À and remove the top of the shipping container Á (Fig. 1).
Remove the accessories box È. It contains the rollers, the power and data cable, one diskette and this
User's Manual (Fig. 7).
•
•
Remove the four blue shock absorbers from the feed adapter and the upper edges of TowerFeed Ä-Ç.
Lay the unit on its side and carefully pull off the lower part of the shipping container Â+Ã (Fig. 2), or enlist
the help of another person to lift TowerFeed out of the container.
Caution:
Do not lift TowerFeed on the Feeder Adapter to prevent it from damage!
•
Insert the rollers from the accessories box with some force onto the shafts on the TowerFeed bottom plate
until they snap into position with an audible click ° (Fig. 3).
•
•
Stand up the TowerFeed unit ± (Fig. 4).
Remove the plastic from TowerFeed.
Warning:
For reshipping TowerFeed you must use the original packing to avoid shipping damage of the unit.
Re-packing (Fig. 5)
It is recommended that you keep the packaging material and inserts for proper protection of the unit and its parts in
case of reshipment.
To repack TowerFeed, follow the above steps in reverse. Be sure that all accessories including manuals and
diskettes are packed in the box. Remove the trays and insert the transportation inserts as shown in Fig. 8 (It is
important to secure the trays to avoid possible shipping damage). Place items according to Fig. 5. Ensure
TowerFeed is correctly seated and cushioned. Insert the four blue shock absorbers and close the container.
IU 661 / 0047
4
TowerFeedTM for the HP LaserJet 8150/8100/8000
UNPACKING
Fig. 1
Cut the packing
strips and lift away the
top of the shipping container.
Fig. 2
Lay unit on side and
carefully pull out
TowerFeed from the
bottom part of the
shipping container.
Fig. 3
Insert rollers
Fig. 4
Stand up TowerFeed
and remove plastic
Fig. 5
Re-packing
IU 661 / 0047
5
TowerFeedTM for the HP LaserJet 8150/8100/8000
BOX CONTENTS
Note:
Prior to delivery, your TowerFeed was thoroughly tested and carefully packaged.
Please check your unit for transportation damage and/or missing parts immediately upon receipt.
Box Contents
(1) TowerFeed unit with
drawers
(2) Accessories box
Fig. 6
Box Contents
Accessories Box Contents
(1) TowerFeed User's Manual
(this manual)
Installation and
User‘s Guide
2
1
(2) Data Cable
(3) Power Cable
(4) Rollers
3
4
Fig. 7
Accessories Box Contents
IU 661 / 0047
6
TowerFeedTM for the HP LaserJet 8150/8100/8000
INSTALLATION
Hardware Installation
Warning:
POWER OFF your printer and TowerFeed and disconnect all power and interface cables before you
proceed with the installation.
Remove Transportation Inserts
•
Pull out, lift upwards and remove the trays from TowerFeed.
Remove the transportation inserts (Fig. 8). There are two at
each side (keep the inserts for reshipment).
•
Re-insert and close the trays.
Fig. 8
Removing Transportation Inserts
Note:
Located on the right side of each tray you will find coding
pins for the paper size. They are set by the factory and must
not be changed.
Position and Connect Printer
Warning:
The printer may weigh up to 53 kilograms (120 pounds). Enlist the
help of a second person to lift the unit. To prevent back strain or
injury, bend your knees when lifting the unit.
•
•
Place the TowerFeed unit at the location you wish. Be sure to
place it on a flat location.
Pull the feeder adapter open and carefully lift the laser printer
onto TowerFeed. Place its positioning holes on the positioning
pegs of the TowerFeed top (Fig. 9).
Be careful to not damage the paper feeding adapter.
Caution:
To lift the printer use one hand for the left hand holds and the
other hand to hold the printer at its right side.
• Do not use the handholds on the right side of the printer.
Fig. 9
Positioning the Printer and
Location of the Power Switch
IU 661 / 0047
7
TowerFeedTM for the HP LaserJet 8150/8100/8000
INSTALLATION
•
Connect TowerFeed and printer with the C-Link cable (Fig. 10) -
one end to the printer port (ACCESSORY) and the other end to the
upper TowerFeed connector (••). The lower TowerFeed connector
(•) allows to connect to further paper handling options (e.g. HP
Multi-Bin Mailbox).
Note:
Secure the connectors with the screws to ensure proper
connection of the systems.
•
Connect the power cables to printer and TowerFeed (Fig. 10).
Note:
When you power on the system, power on FIRST TowerFeed and
then the printer.
Caution:
When rolling TowerFeed and printer to another place, watch out
when crossing doorsteps to not have the unit tipping over or
TowerFeed drawers sliding open.
Fig. 10 Connecting the Cables
IU 661 / 0047
8
TowerFeedTM for the HP LaserJet 8150/8100/8000
INSTALLATION
Printer Panel Settings
Papertype Assignments
By default, each paper tray has assigned the paper type PLAIN. In case of a paper out in a selected tray, the
printer automatically will pull paper from another tray.
Assigning a different paper type to each tray inhibits the automatic switching to another tray if the selected tray runs
out of paper.
To assign a paper type to an input tray, select with the menu key the PAPER HANDLING MENU and there the
specific input tray. Then assign to each tray another one of the 11 predefined paper types.
If you have several trays with the same paper, assign to each of these trays the same paper type. This will increase
your input capacity for this paper type, as the printer will automatically switch to the next tray with the same paper
type in case the selected tray runs out of paper.
For further information please also refer to APPENDIX B – Tips & Hints.
Note:
PLAIN is the default paper type. In case a print job arrives without paper selection, the printer will pull
paper from the first tray containing PLAIN paper (e.g. printer test pages).
Software Installation
Installation of Printer Driver
Install the printer drivers deliverd with your HP LaserJet according to the instructions.
For availability of the most recent printer drivers and drivers for other operating systems, please consult the HP
Note:
After installing the new printer driver, exit and restart your Windows System.
IU 661 / 0047
9
TowerFeedTM for the HP LaserJet 8150/8100/8000
INSTALLATION
Configuring the TowerFeed Option
To configure your printer with the TowerFeed option, go to the Control Panel,
select Printers and there the respective HP LaserJet driver.
Click on Properties, and in the respective window the Configure tab.
Fig. 11a Optional Paper Sources
Fig 11 Configure Tab
In this window click in the pull-down bar for the Optional Paper Sources: to select your TowerFeed model (Fig.
11a). The artwork on the right will show the selected printer with the TowerFeed model installed (Fig. 11).
When clicking on the Paper tab you will see in the Source is: all available paper sources of your printer including
the TowerFeed paper trays (Fig. 12).
Fig. 13 Page Setup (Word 7)
Fig. 12 Paper Tab
In the application programs you select the paper sources in the Paper Setup function (File - Page Setup), where all
available paper sources show up in the respective Paper Sources: pull-down bar(s) (Fig. 13).
Note:
For further information on Tray and Media Type definition please also refer to APPENDIX B - Tips & Hints of
this manual.
IU 661 / 0047
10
TowerFeedTM for the HP LaserJet 8150/8100/8000
OPERATING
Operation
Loading Paper
•
•
Pull open the tray you wish to load until it reaches the stop
or remove it completely for more convenient loading.
Obtain a fresh ream of paper. Best results will be obtained
using regular copier or laser printer paper (see "Paper
Quality Guidelines").
Hold the ream on the long edge and bend it in and out.
Repeat on the short edge. Square it off properly (Fig. 14).
Fig. 14 Fanning the Paper
•
Load letterhead paper face down, with the letterhead
towards the right side.
Note:
Duplex printing requires different loading of preprinted paper
(please also refer to the instructions in the printer manual).
An additional TowerFeed tray will allow to have the same
(preprinted) paper in two different trays and available online
for regular and duplex printing.
Fig. 15 Filling in Paper
•
Insert approx. one third of the ream in the tray and ensure
that all paper is lined up with the rear stop. Repeat two more
times for the rest of the ream (Fig. 15).
•
•
Push down the stack, such that all sheets are under the
separation corners (Fig. 16).
The right paper guide can be adjusted by pushing the
separation corner tab to the left to ensure proper guiding of
the paper.
Fig. 16 Correct Paper Loading
•
Push down on the paper stack a few times. The paper
must move up and down freely.
Paper Sample
Note:
For your convenience, you may insert a sample piece
(about 1 inch/28 mm) of the loaded paper type into the
extrusion as a reference when reloading the tray (Fig. 17).
•
Close the tray. Repeat the procedure for all trays to be
loaded.
Fig. 17 Marking the Tray
IU 661 / 0047
11
TowerFeedTM for the HP LaserJet 8150/8100/8000
OPERATING
Paper Tray empty
alternating
with
TRAY n EMPTY
CHECK RIGHT DOOR
READY
This message indicates an empty paper tray. Refill the depleted tray.
While feeding occurs from a higher tray, lower ones may be reloaded without interrupting feeding and printing.
Paper Tray depleted during Print Job
(n = drawer number)
TRAY n LOAD
Media Type & Size
This message appears if the selected tray runs out of paper (and if there is no other tray with the same paper size
and type, depending of the printer settings.)
If a tray runs out of paper, the printer will automatically switch to another tray with the same paper type and size
and pull paper from there. Otherwise it displays that message, the Attention LED starts blinking, and a respective
error message appears at the user screen (depending on the application).
Refill the tray with the correct paper. After closing the tray, the printer will resume printing.
Requested Paper missing
TRAY 1 LOAD
Media Type & Size
This message indicates that the requested paper is not available, either because the print job explicitely asks paper
from tray 1, or because it asks for paper from a tray which size and type does not correspond with the document
page settings.
Load tray 1 with the requested paper or cross-check the settings for the document (Page Setup).
Paper Jam
In case of a paper jam, the printer panel Attention LED will start blinking and the printer display will show a
respective message with the following meaning:
13.1 PAPER JAM
13.11 PAPER JAM
paper jam in printer
paper jam in TowerFeed
•
In case of a printer paper jam, you will see the following alternating messages:
alternating
with
13.1 PAPER JAM
CHECK RIGHT DOOR
THEN OPEN AND
CLOSE TOP COVER
Remove the paper jam and all other pages in the paper path and close all the cover(s). Printing will continue. For
more details on clearing printer paper jams please refer to your printer manual (Chapter Maintenance and Trouble
Shooting, Section Paper Jams).
IU 661 / 0047
12
TowerFeedTM for the HP LaserJet 8150/8100/8000
OPERATING
•
In case of a TowerFeed paper error, the following alternating messages will be displayed:
alternating
with
13.11 PAPER JAM
IN INPUT DEVICE
CHECK TRAY n
AND RIGHT DOOR
and TowerFeed will beep with either one of the following sequences (depending on type of error):
or
(TowerFeed Paper Jam)
(TowerFeed Motor Block)
Open the TowerFeed trays, starting with the lowest one. TowerFeed beeping will stop when the tray which
fed the last sheet is opened. Remove the jammed paper from the TowerFeed paper path. Close all
TowerFeed trays. Printing will continue automatically.
In case the printer could not automatically eject the remaining paper inside the printer, open the printer cover(s)
and clear the paper path. Close the printer cover(s) to have the printer resume the print job.
IU 661 / 0047
13
TowerFeedTM for the HP LaserJet 8150/8100/8000
PAPER QUALITY GUIDELINES
General
These paper quality guidelines are general recommendations. Paper beyond these specifications may work as
well, however it should be tested before use. Paper is a material that reacts intensively to adverse temperature and
humidity conditions. The observance of proper conditions as defined below is therefore essential for trouble-free
operation of TowerFeed. Please also refer to the corresponding guidelines in the printer manual.
Paper Quality and Surface
Bond type papers and papers with slight rag content are recommended. For papers with high rag content, as well
as very light and air mail papers, feeding tests must be conducted to check for satisfactory performance before
regular use. Paper with embossed or heavy printing should be tested in TowerFeed before use, as well. Papers
with glossy or structured surface are not recommended. Individual sheets in a stack must not be damaged, warped
more than 3 mm (0. 12") at an angle of max. 20° or creased, since all these may reduce the feeding performance.
Paper Weight
60 - 95 g / m2 (16 - 24 lb.). Other paper weights must be tested before use.
Tolerance
Paper must be cut to the appropriate size dimension within a tolerance of +/- 1.0 mm (+/- 0.04"). The paper stack
must be cut square to within a tolerance of 90° +/- 0.1°.
Recommended Storage Environment
Temperature:
18°C - 24°C (64°F - 75°F)
Relative humidity: 40% - 60%
IU 661 / 0047
14
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX A - Printer Specific Notes
Printer Firmware Revision
The Firmware of your HP LaserJet printer must be the following Revision to correctly support the TowerFeed
option:
HP LaserJet 8150
HP LaserJet 8100
HP LaserJet 8000
all revisions
5.29 or newer
>4.29
(lower firmware revisions do not support the ‘POWESAVE’ function)
In case your HP LaserJet 8000 printer does not have a newer printer Firmware revision than 4.29, you have to set
the POWERSAVE function to OFF (printer panel: CONFIGURATION MENU, POWERSAVE = OFF) or ask your HP
Dealer for a newer printer firmware.
Printer Driver Revision
Please use the drivers from the CD received with your printer.
For the most recent driver revisions available, please consult the HP WEB or our WEB site at
HP LaserJet Duplexer Option
The printer's duplexing capabilities remain fully supported, with the TowerFeed paper handling option installed.
HP 2000-Sheet Tray and 2x500-Sheet Input Trays
TowerFeed is used instead of these options and therefore, they cannot be installed together with TowerFeed.
Optional HP Paper Output Units
These output options can be installed together with TowerFeed. For the TowerFeed 6-tray unit you can order a
special stand to compensate for the height difference of the output option.
HP JetAdmin
The HP JetAdmin network printer administration software does not fully support the TowerFeed paper handling
option, particularly not the remote paper type assignment to the paper trays. (This assignment has to be done via
the printer panel, as described in Papertype Assignments on page 9 of this manual.)
IU 661 / 0047
15
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX B - Tips & Hints
Power ON Sequence
Power On TowerFeed first!
When powering on the printer, it will scan its option bus for available options. In case TowerFeed would not be
ready at that point in time, the printer would not activate its support and not add this option to its configuration.
Printing on the wrong Paper
Why doesn't it print from the tray I selected?
If a selected Tray # does not contain the paper size assigned for the print job, the printer might look for other trays
containing the demanded paper size, and if this is available (and with the same Media Type as Tray #) will pull
paper from there.
The 3 Rules For Correct Paper Selection
1.
2.
3.
Assign a different Paper Type to every Tray # by using the printers control panel.
You may assign the same Paper Type to two or more tray numbers only if these trays all contain the
same Paper Type.
Make sure that you select the correct Paper Size for the selected Tray #.
The selected Paper Size in the application software must be the same as the size of the selected Tray
#.
Select paper within your application by Paper Type or by Tray #.
If a tray containing the selected Paper Type runs out, the printer will pull paper from other trays only if
they have the same Paper Size and Type.
Paper Control and Selection
Selection Criteria
The HP LaserJet offers various possibilities to select paper by offering three selection criteria:
•
•
•
Paper Size
Paper Source (Tray number)
Paper Type
The selection criteria differ in their priorities and can be changed using the JetAdmin utility software.
Paper Types
The Paper Type is a selection criteria which can be used to name trays and to distinguish between different paper
types within a given paper size. The HP LaserJet offers 11 predefined Paper Types: Bond, Cardstock, Color,
Labels, Letterhead, Plain, Preprinted, Prepunched, Recycled, Rough and Transparency.
Default Paper Type
Without a specific paper type assigned to a Tray, Plain becomes the default paper type.
Changing Paper Type from the Control Panel
1.
2.
3.
4.
Press MENU until PAPER HANDLING MENU appears
Press ITEM to scroll through the trays and their paper types
Press + to scroll through the paper type options
Press SELECT* to choose the type of paper you loaded in the tray.
IU 661 / 0047
16
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX B - Tips & Hints
Creating PAPER SEQUENCES for a Word Document
It is widely known that in Page Setup you have the possibility to enter different paper sources for First Page and
Other Pages. If there are other pages in the document, which have to be printed on another paper, this can be
defined in the same Page Setup window. In this window there is a pull-down bar Apply to: which is used for that
purpose. The default setting is Whole Document but there are also the options This point forward and Selected
text, which can be selected (Fig. 18 and 18a).
Fig. 18 Page Setup – This point forward
Fig. 18a Page Setup – Selected text
The option Apply to: allows to force a change of the paper source or from a specific page onwards and thus to
define paper sequences for a whole document.
Printing a DOCUMENT WITH COPIES (Multi-Part-Form)
When printing a document you get either an original copy (copies = 1), or, if you set copies = n, you will get n times
the same printout. Usually you want the original document to distinguish from its copies. An elegant method for that
purpose is to print the copies on different (color) paper. This can be done by sending the print job several times to
the printer but with different page settings. Using a Macro makes this an easy task.
On the next page you will find an example of a macro used for a Word document. The macro starts with 'Sub
Macro' and ends with 'End Sub'. It consists of several sections (one per copy) which contain the paper definitions
for each copy (FirstPageTray = xx; OtherPagesTray = yy).
You can use the Macro Recording function of Word (Extra-Macro-Record) to produce the first section by performing
the steps for Page Setup and Print. Then, in Macro Edit mode, you copy/paste this section to have one for each
copy to print (one section per copy). Finally you edit the entries in FirstPageTray = xx; OtherPagesTray = yy to the
desired paper sources.
This will produce a macro, which prints the document in multiple copies and with the respective page settings.
Such a macro can be incorporated into a Menu item or added as icon into the Toolbar.
Hint:
When creating and adding a Macro to the Toolbar for automatic printing of the final document with its
copies, it might be useful to also create and add a second Macro for draft printing on cheap paper.
IU 661 / 0047
17
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX B - Tips & Hints
The following table shows the internal denominations of the paper sources:
HP LaserJet 8150 / 8100 / 8000
Paper Type
Tray
Denomination
Tray 1 (HP Printer)
Tray 2 (HP Printer)
Tray 3 (HP Printer)
Tray 4 (TowerFeed)
Tray 5 (TowerFeed)
Tray 6 (TowerFeed)
Tray 7 (TowerFeed)
Tray 8 (TowerFeed)
Tray 9 (TowerFeed)
wdPrinterUpperBin
wdPrinterLowerBin
wdPrinterLargeCapacityBin
256
257
258
259
260
261
e.g. Letterhead
e.g. Plain
e.g. Bond
e.g. Color
Example:
The following Word Macro will produce an original document (on company paper) incl. 2 copies (plain and color).
Page
Original (Copy 1)
1st Copy (Copy 2)
2nd Copy (Copy 3)
First Page
Other Pages
Letterhead
Bond
Plain
Plain
Color
Color
Macro Start
Sub Macro1 ()
Macro1 Macro
Macro recorded 05.06.98 by ...
ActivePrinter = "HP LaserJet 8000 Series PCL 6"
Application.PrintOut FileName:="", Range:=wdPrintRangeOfPages, Item:= _
wdPrintDocumentContent, Copies:=1, Pages:="1", PageType:=wdPrintAllPages, _
Collate:=True, Background:=True, PrintToFile:=False
With ActiveDocument.PageSetup
.LineNumbering.Active = False
.Orientation = wdOrientPortrait
.TopMargin = CentimetersToPoints(1.8)
.BottomMargin = CentimetersToPoints(2)
.LeftMargin = CentimetersToPoints(2)
.RightMargin = CentimetersToPoints(1)
.Gutter = CentimetersToPoints(0)
.HeaderDistance = CentimetersToPoints(0.5)
.FooterDistance = CentimetersToPoints(2)
.PageWidth = CentimetersToPoints(21)
.PageHeight = CentimetersToPoints(29.7)
.FirstPageTray = wdPrinterLowerBin
.OtherPagesTray = 256
.SectionStart = wdSectionNewPage
.OddAndEvenPagesHeaderFooter = False
.DifferentFirstPageHeaderFooter = False
.VerticalAlignment = wdAlignVerticalTop
.SuppressEndnotes = False
.MirrorMargins = True
End With
Active Document.PrintOut
IU 661 / 0047
18
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX B - Tips & Hints
With ActiveDocument.PageSetup
.LineNumbering.Active = False
.Orientation = wdOrientPortrait
.TopMargin = CentimetersToPoints(1.8)
.BottomMargin = CentimetersToPoints(2)
.LeftMargin = CentimetersToPoints(2)
.RightMargin = CentimetersToPoints(1)
.Gutter = CentimetersToPoints(0)
.HeaderDistance = CentimetersToPoints(0.5)
.FooterDistance = CentimetersToPoints(2)
.PageWidth = CentimetersToPoints(21)
.PageHeight = CentimetersToPoints(29.7)
.FirstPageTray = wdPrinterLargeCapacityBin
.OtherPagesTray = wdPrinterLargeCapacityBin
.SectionStart = wdSectionNewPage
.OddAndEvenPagesHeaderFooter = False
.DifferentFirstPageHeaderFooter = False
.VerticalAlignment = wdAlignVerticalTop
.SuppressEndnotes = False
.MirrorMargins = True
End With
Active Document.PrintOut
With ActiveDocument.PageSetup
.LineNumbering.Active = False
.Orientation = wdOrientPortrait
.TopMargin = CentimetersToPoints(1.8)
.BottomMargin = CentimetersToPoints(2)
.LeftMargin = CentimetersToPoints(2)
.RightMargin = CentimetersToPoints(1)
.Gutter = CentimetersToPoints(0)
.HeaderDistance = CentimetersToPoints(0.5)
.FooterDistance = CentimetersToPoints(2)
.PageWidth = CentimetersToPoints(21)
.PageHeight = CentimetersToPoints(29.7)
.FirstPageTray = 257
.OtherPagesTray = 257
.SectionStart = wdSectionNewPage
.OddAndEvenPagesHeaderFooter = False
.DifferentFirstPageHeaderFooter = False
.VerticalAlignment = wdAlignVerticalTop
.SuppressEndnotes = False
.MirrorMargins = True
End With
Active Document.PrintOut
End Sub
Macro End
IU 661 / 0047
19
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX C - Standard Applications
Where to select Paper Size and Paper Type
You select the TowerFeed option paper sources from your standard application software the same way as the
regular printers paper sources.
Please also refer to Appendix B (Tips & Hints - The 3 Rules For Correct Paper Selection) for recommendations on
which paper selection criteria to use.
Below you will find the information on where to set the paper selection parameters in the most common standard
applications.
MS-WORD:
EXCEL:
File - Page Setup – Paper Size
Paper Source
Paper Size:
First Page:
Other Pages:
File - Print - Properties - Paper
File - Page Setup - Page
Size is:
Source is:
Type is:
Paper Size:
Size is:
Page - Options - Paper
Source is:
Type is:
WRITE:
File - Print - Setup
Paper Size:
Paper Source:
IU 661 / 0047
20
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX D - Macintosh Environment
This information was not yet available at printing time.
Please refer to our WEB site for the most recent software versions: http://www.rutishauser.ch/ti/sdlhp.htm.
IU 661 / 0047
21
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX D - Macintosh Environment
This information was not yet available at printing time.
Please refer to our WEB site for the most recent software versions: http://www.rutishauser.ch/ti/sdlhp.htm.
.
IU 661 / 0047
22
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX E - PCL Paper Selection Commands
Frequently used PCL commands for Paper Selection:
Command
function
# refers to HP LaserJet 8150 / 8100 / 8000
ESC & l # H
Selects Paper
Source
0
1
print/eject page
Tray 2
2
3
4
5
Manual Feed - Paper
Manual Feed - Envelope
Tray 4 (2000-Sheet Input Tray*)
Tray 3
6
Envelope Feeder
7
Auto Select
8
Tray 1
20
21
22
23
24
25
Tray 4 (TowerFeed Tray 1)
Tray 5 (TowerFeed Tray 2)
Tray 6 (TowerFeed Tray 3)
Tray 7 (TowerFeed Tray 4)
Tray 8 (TowerFeed Tray 5)
Tray 9 (TowerFeed Tray 6)
*NA with TowerFeed installed
ESC & l # A
Selects Paper
Size
2
3
6
= Letter
= Legal
= 11 in x 17 in
26 = A4
27 = A3
for other sizes please refer to your printer manual
ESC & n # Wd mediatype Selects Paper
Type
#
mediatype
Panel Display**
6
Plain
PLAIN
11
11
13
11
7
Preprinted
Letterhead
Transparency
Prepunched
Labels
PREPRINTD
LTRHEAD
TRNSPRNCY
PREPUNCHD
LABELS
5
Bond
BOND
9
6
Recycled
Color
RECYCLED
COLOR
11
6
Cardstock
Rough
CARDSTOCK
ROUGH
**indication for refernce purposes only
IU 661 / 0047
23
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX F - Troubleshooting
Diagnosing an Error Situation
When calling for support, please have the Printer test pages at hand (Configuration Page, Menu Map and
Event Log Page as per APPENDIX G).
Pos LED
Printer Display
TF Beeping Description
Action / Remarks
1
OFF
Tray n open
Close Tray
TRAY n OPEN
alternating with
READY
2
OFF
Empty Tray without
pending print request
Reload tray n
TRAY n EMPTY
alternating with
READY
3
4
ON
ON
Requested paper not
available
Load Tray 1 with the correct size
TRAY 1 LOAD
Media Type & Size
See printer manual to change Media Size and Type
through the printer control panel.
Paper requested from
empty Tray n
Refill Tray n
TRAY n LOAD
Media Type & Size
Switches automatically to next Tray with same Size
& Type and pulls paper from there (depending on
settings).
5
6
ON
ON
Paper jam in Printer
Clear paper jam and all other sheets from the
paper path. Open/close printer cover(s)
13.1 PAPER JAM
CHECK RIGHT DOOR
alternating with
Also refer to section 'OPERATING - 'Paper Jam' in
this manual and to your printer manual for further
details.
THEN OPEN AND
CLOSE TOP COVER
Beep Type 2 Paper jam in TowerFeed Clear paper jam in TF. Close TF Tray(s).
or
13.11 PAPER JAM
IN INPUT DEVICE
alternating with
Beep Type 3 TowerFeed Motor blocked Open TF Tray(s). Remove all sheets from the TF
paper path. Close TF Tray(s).
CHECK TRAY n
AND RIGHT DOOR
In case error stays, call Service.
For TF Beeping Sequences (TF Beep Types) see next page.
For other error messages on the printer panel display please refer to your printer manual.
IU 661 / 0047
24
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX F - Troubleshooting
TowerFeed Beep Types
Type 0
(1x short)
TowerFeed Reset Beep (e.g. after Power ON)
Paper in TowerFeed paper path after a printer Reset
Paper Jam in TowerFeed
Type 1
(short – short)
Type 2
(long – long)
Type 3
TowerFeed Motor blocked
(short – long)
Type 4
(6x short)
Opening a TowerFeed tray or the paper feeding
adapter during a feed cycle
IU 661 / 0047
25
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX G – Printer Selftest Pages
The following three functions allow you to print out information about your printing system configuration. These
pages can be selected via printer panel (Item: INFORMATION MENU).
Note:
The information for the configuration page are recorded at power-up time. There is no update of the changes
after power-up.
Configuration Page (Sample page on page 27)
This page will be printed via printer panel (INFORMATION MENU - PRINT CONFIGURATION).
Of particular interest are the indications under Paper Trays and Options where you can see:
Paper Trays and Options
- PH Controller (Revision) PHC
- Device 1:
Rutishauser TOWERFEED 444 option with configuration,
Firmware Revision of Option PCB/Logic PCB,
installed trays [size code*] and tray capacity
*[size codes]: A4=6, A3=4, US Letter=7 , US Legal=3, US Ledger=5
Menu Map (Sample page on page 28)
The Menu Map page can be selected via printer panel (INFORMATION MENU - PRINT MENU MAP).
This page is showing the different paper sources and its allocated Media Types.
PAPER HANDLING MENU
showing paper sources (trays) with the allocated Media Types, e.g.
Tray 4 TYPE = LETTERHEAD
Event Log Page (Sample page on page 29)
Via printer panel (INFORMATION MENU - PRINT EVENT LOG) you can print the Event Log Page showing the last
50 system errors including an error code for identification. Very helpful for diagnosing purposes!
TowerFeed error codes:
13.1x.3n
13.1x.2n
TowerFeed Paper Jam
TowerFeed Motor blocked
x = Device numer
n = TowerFeed tray number (not printer tray)
Note:
Whenever calling for service, please make sure to have these information pages at hand.
IU 661 / 0047
26
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX G – Printer Selftest Pages
Please refer to page 26 for more information on this page.
IU 661 / 0047
27
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX G – Printer Selftest Pages
Please refer to page 26 for
more information on this page.
IU 661 / 0047
28
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX G – Printer Selftest Pages
Please refer to page 26 for more information on this page.
IU 661 / 0047
29
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX H - TowerFeed Selftest
TowerFeed Selftest Feature
The TowerFeed selftest feature allows to test the TowerFeed unit independently from any printer and computer.
With this test you can check for correct paper feeding (horizontal position, skew, jam behavior).
Note:
To perform a TowerFeed selftest, remove the printer's paper cassette.
Follow the following steps:
•
•
•
Power-off TowerFeed.
Open all TowerFeed Trays (approx. 5 cm is sufficient).
Put a (deflector-) sheet of paper between the TowerFeed paper feeding adapter and the printer (to avoid the
sheet being fed to enter into the printeer’s paper path).
•
•
Power-on TowerFeed.
Wait until you hear a short beep followed by the clicking of the solenoid activation in every module, and
finally the spinning of the motor (approx. 5 sec).
•
•
Close the top-most TowerFeed tray. After a few seconds a sheet will be fed from this drawer. You now can
mark on the (deflector-) sheet the position of the left border of the (reference for horizontal paper position).
Pull out the sheet from its waiting position. TowerFeed will automatically feed a next sheet. You now can
compare the position of the left border of the next sheet. If it moves up straight in the same position, this is
ok. (In case the left position would be different, or moving from left to right (or vice-versa), this might indicate
a problem in either the tray, the unit (module) or the paper loading.)
•
•
To test the next lower tray, close that tray before removing the sheet from its waiting position. Now
TowerFeed will feed the sheet from that next lower tray. (TowerFeed will always feed the next sheet from its
lowest closed tray.)
To revert to normal operation, remove the (deflector-) sheet and power-off and on TowerFeed again with at
least on tray closed. TowerFeed will respond with a short 'Reset' beep that it is ready again.
In case error conditions are showing up which are depending on a specific TowerFeed tray, you can swap trays to
find out whether a problem exists with the tray itself or whether a specific module is the cause.
IU 661 / 0047
30
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX I - Cleaning and Maintenance
TowerFeed does not require preventive maintenance. Cleaning of housing and removal of paper dust from within
the TowerFeed drawers might now and then be indicated.
Clean the outside of TowerFeed with a lightly water-dampened cloth. Do not use detergents to avoid damage of
the surfaces.
To clean the paper drawers from paper dust, completely remove the drawers from TowerFeed, remove the paper
and use a vacuum cleaner with a soft brush.
Warning:
To avoid damage to the paper-out sensor arms do not reach into the openings for the paper drawers.
IU 661 / 0047
31
TowerFeedTM for the HP LaserJet 8150/8100/8000
APPENDIX J – TowerFeed Specifications
Dimensions and Weights:
Desktop Model
Floor Model
Model Designation
TF 444/44.60
TF 444/66.60
Width
608 mm
608 mm
Depth
521 mm
521 mm
Height
480 mm
660 mm
Weight
38.7 kg
56.8 kg
Paper Specifications:
60 - 95 g/m2 (16 - 24 lb.)
Note:
Also consult the paper specifications
for your printer.
Paper Trays:
Standard trays:
Europe:
A4 Landscape (European Size)
US Letter Landscape (81/2" x 11")
USA:
Optional trays:
Europe:
USA:
A3 Portrait
US Legal Portrait (81/2" x 14")
US Ledger Portrait (11" x 17")
Tray capacity:
Small paper sizes
(A4, Letter, Legal)
Up to 500 sheets or a stack of 50 mm, whichever,
depending on paper weight, is reached first.
Large paper sizes
(A3, Ledger)
Up to 250 sheets or a stack of 26 mm, whichever,
depending on paper weight, is reached first.
Positioning accuracy:
For bond type paper typically better than
vertical:
horizontal: +/- 2.0 mm (0.08")
skew: 2.5 mm (0.10")
+/- 2.0 mm (0.08")
Temperature:
Operating: 10°C to 32°C (50°F to 90°F)
Storage: -25°C to 50°C (-13°F to 122°F)
Relative humidity (non-condensing):
Operating: 30% to 80%
Storage:
5% to 95%
Note:
Observe recommended storage
conditions for paper
(see 'Paper Quality Guidelines').
Power Requirements:
Fuse Type:
220 - 240 V~ +/-10%, 50 Hz, 100 mA
or
100 - 120 V~ +/-10%, 60 Hz, 200 mA
220 - 240 V: 150 mA slow (5x20mm)
100 - 120 V: 300 mA slow (5x20mm)
IU 661 / 0047
32
TowerFeedTM for the HP LaserJet 8150/8100/8000
Rutishauser Data AG, Switzerland, reserves the right to make changes to its products or
services without prior notice and without incurring any obligations to incorporate such
changes in units or publications shipped.
Rutishauser shall in no event be liable for incidental or consequential damages arising
from the use of its equipment.
Further Options for HP LaserJets:
Manufactured by
Rutishauser Data AG
Kronenstrasse 9
CH-8712 Stäfa
Switzerland
Tel:
Fax
+41/ 1 928 18 28
+41/ 1 928 18 29
e-mail [email protected]
TowerFeed 444 for
the HP LaserJet 4050/4000 the HP LaserJet 5000
TowerFeed 444 for
|