Clifford 3303X User Manual

®
The company behind Clifford Auto Security Systems  
is Directed Electronics.  
Vista, CA 92081  
Since its inception, Directed Electronics has had one  
purpose, to provide consumers with the finest vehicle  
security and car stereo products and accessories  
available. The recipient of nearly 100 patents and  
Innovations Awards in the field of advanced electronic  
technology, Directed Electronics is ISO 9001 registered.  
THE SCIENCE OF SECURITY™  
Quality Directed Electronics products are sold and serviced  
throughout North America and around the world.  
Call (800) 876-0800 for more information about our  
products and services.  
2009 Directed Electronics, All rights reserved.  
G3303X 2009 11  
©
Directed Electronics is committed to delivering  
world class quality products and services that  
excite and delight our customers.  
M
O
D
E
L
O W N E R’ S G U I D E  
Directed Electronics is an  
ISO 9001 registered company.  
330.3X  
Congratulations  
Congratulations on the purchase of your state-of-the-art security system.  
Reading this owners guide prior to using your system will help maxi-  
mize the use of your system and its many features. For more informa-  
tion please visit the below website:  
formation.  
For any additional questions please contact your authorized Directed  
dealer or contact Directed at 1-800-753-0600.  
What you get  
Welcome to the best generation of vehicle security. Your system con-  
tains everything you need.  
s
s
s
s
s
s
Responder LC remote control  
1-way companion remote control  
AC adapter for charging your remote control  
This owners guide  
Quick reference card  
Warranty card  
Warranty  
Card  
AUX  
Quick  
Reference Card  
G3303X 2009-11  
Important information  
Your Warranty  
Your system comes with a warranty. Please make sure you receive the  
warranty registration card and proof of purchase from your dealer  
indicating the product was installed by an authorized Directed dealer.  
Your product warranty must be validated within 10 days of purchase.  
You can validate it online at www.prodregister.com/directed or com-  
plete and return the warranty registration card.  
Quick Reference Card  
Carry this card with you to reference your systems many features.  
Replacement Remote Controls  
If additional remote controls are desired, please see your authorized  
dealer or visit us at www.directedstore.com to order. Part numbers  
are: 7351X for Responder LC 2-way remote control and 7153X for  
the 1-way companion remote control.  
Contents  
Getting Started.................................................................................................... 4  
Charging the Remote Control ................................................................ 4  
Keys to using this Manual ..................................................................... 5  
Responder LC 2-Way........................................................................................... 6  
Status Screen Icons.............................................................................................. 8  
Using your System............................................................................................. 11  
Commands and Confirmations ............................................................ 11  
Performing Commands....................................................................... 11  
Responder LC Command table ............................................................ 12  
Basic Commands (Direct Access) ........................................................................ 13  
Arm ................................................................................................. 13  
Disarm ............................................................................................. 13  
AUX/Trunk........................................................................................ 14  
Remote Start /AUX 1/ AUX 4 ............................................................. 14  
Advanced Commands: (Level 1) ......................................................................... 15  
Silent Arm......................................................................................... 15  
AUX 1.............................................................................................. 15  
Advanced Commands: (Level 2) ......................................................................... 16  
Sensor Bypass................................................................................... 16  
Remote Valet .................................................................................... 16  
AUX 2.............................................................................................. 16  
Advanced Commands: (Level 3) ......................................................................... 17  
Sensor Silent Arm* ............................................................................ 17  
AUX 3.............................................................................................. 17  
Alarm Report*................................................................................... 18  
Advanced Commands: (Level 4) ......................................................................... 19  
Full Silent Arm*................................................................................. 19  
AUX 4.............................................................................................. 19  
Responder LC Configuration............................................................................... 20  
Navigating Menus and Options .......................................................... 20  
Button Operation............................................................................... 20  
Access Menu Items ............................................................................ 20  
Main Menu....................................................................................................... 21  
Setup Remote Menu: .......................................................................... 21  
Remote Start Info ............................................................................... 22  
Runtime Alert..................................................................................... 22  
Car 2............................................................................................... 23  
BackLight.......................................................................................... 23  
Temp Unit ......................................................................................... 23  
Button Beep....................................................................................... 23  
System Type...................................................................................... 23  
Clock Set.......................................................................................... 24  
Review ............................................................................................. 24  
Exit .................................................................................................. 24  
Sensor Adjust:................................................................................... 24  
Pair a Responder LC remote control: .................................................... 24  
Demo Mode:..................................................................................... 25  
Power Off:........................................................................................ 26  
Exit: ................................................................................................. 26  
Alarm Features ................................................................................................. 27  
Normal Arm Protection....................................................................... 27  
Sensor Silent Arm Protection................................................................ 27  
Full Silent Arm Protection .................................................................... 28  
Sensor Warn-away Messages ............................................................. 28  
Full Trigger Messages......................................................................... 28  
Emergency Override .......................................................................... 28  
Trigger Zone Fault Report.................................................................... 29  
Alarm Report when Disarming............................................................. 29  
Alarm Report when Requested............................................................. 30  
Nuisance Prevention (NPC)................................................................. 30  
Remote and System Operations.......................................................................... 31  
Passive Arming*................................................................................ 31  
Auto Re-arming*................................................................................ 31  
Valet Mode....................................................................................... 32  
Power Save....................................................................................... 32  
Rapid Resume ................................................................................... 32  
Automatic Remote Updates ................................................................. 32  
Out of Range .................................................................................... 33  
No Remote Output............................................................................. 33  
Car Select......................................................................................... 33  
Vehicle Recovery System (VRS) ............................................................ 34  
1-way Companion Remote Control..................................................................... 35  
Accessing Commands ........................................................................ 36  
Button Auto Lock................................................................................ 36  
Car Select......................................................................................... 36  
Programming .................................................................................... 37  
Battery Information (1-way)................................................................. 38  
Low Battery Alerts.............................................................................. 38  
Battery Replacement........................................................................... 38  
System Expansion Options................................................................................. 39  
Battery Information (Responder LC)..................................................................... 41  
Low Battery....................................................................................... 41  
Battery Life........................................................................................ 42  
Battery Disposal ................................................................................ 43  
Glossary of Terms.............................................................................................. 44  
Government Regulations.................................................................................... 46  
Additional information....................................................................................... 47  
Interference....................................................................................... 47  
Upgrades and Batteries...................................................................... 47  
Water/Heat Resistance ...................................................................... 47  
Limited lifetime consumer warranty..................................................................... 48  
Getting Started  
Your remote control is powered by an internal rechargeable battery  
that can only be serviced by an authorized Directed dealer. Due to  
transit and storage time prior to your purchase, the battery charge  
may have depleted. To ensure proper operation, check the battery  
level and connect the battery charger if not fully charged. See Bat-  
tery Information and Status Screen Icons sections for more information  
about the battery.  
Charging the Remote Control  
1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB  
connector into the mini-USB port located on the side of the  
remote control (see diagram under Responder LC 2-way). The  
CHARGE  
text field will display  
to indicate the remote control is  
charging (The remote remains operational while charging and  
can command the system).  
FULL  
2. Once fully charged the text field will display  
.
3. The remote control is then ready for use. Disconnect the mini-  
USB end from the remote control first and then the AC adapter  
from the AC outlet.  
The remote control remains operational while charging and  
can command the system.  
Note  
If the battery is excessively depleted when the charger is  
connected, functionality may be delayed while it charges to  
the minimum voltage required to operate the display, after  
which normal charging resumes.  
© 2009 Directed Electronics. All rights reserved.  
4
Keys to using this Manual  
Specific actions (in bold type) and style conventions are used consis-  
tently throughout this manual, they are as follows:  
s
s
Press: implies pushing in and releasing a button.  
Hold: is used after “press” actions when a button needs to be  
held in position for an extended period of time, typically several  
seconds.  
ARMED  
s
this style denotes the text which appears in the text field  
portion of the display during operations described in the manual.  
If the text string is too long for the text field, it then plays and loops  
sequentially word by word.  
s
s
Italicized words denote section/sub headings in this guide and  
can be located through the table of contents.  
An asterisk (*) when used after a word or phrase denotes that  
additional details can be found in related sections usually noted  
at the bottom of the page or end of the section.  
© 2009 Directed Electronics. All rights reserved.  
5
Responder LC 2-Way  
Internal  
Antenna  
Display  
Function Button  
Mini-USB Port  
Command  
Buttons  
Feature  
Description  
Internal Antenna  
Display  
Used for transmitting and receiving information  
Status screen - the upper portion of the display contains status  
icons for the system, siren, alarm zones, and remote control  
Text field - the lower portion of display shows the clock,  
command confirmations, page messages and programming  
menus  
Command Buttons (4)  
Function Button  
Used to perform arming, disarming and auxiliary channel  
commands  
Used to access function levels for commands, configuration  
menus for programming, and car selection  
Mini-USB Port  
The battery charger plugs into this port  
© 2009 Directed Electronics. All rights reserved.  
6
Control Center  
Control Center  
Button  
Control Center  
LED  
The control center, typically located on the upper part of the front  
windshield sends and receives commands or messages to and from  
your system. It consists of:  
s
s
The In-vehicle system antenna, for 2 way communication.  
The control center LED, as a visual indicator of the systems sta-  
tus.  
s
The control center button, for placing the system into valet mode*  
and to perform the emergency override** operation.  
*
See Remote and System Operations section for details.  
** See Alarm Features for details.  
© 2009 Directed Electronics. All rights reserved.  
7
Status Screen Icons  
ALL  
1
Status Screen  
Icons  
Text Field  
The table below describes all the status screen icons.  
Icon  
Description  
Armed: The system is armed, the alarm is enabled  
Locked: The system is locked in valet, the alarm is disabled  
Disarmed: The system is disarmed, the alarm is disabled  
Unlocked: The system is unlocked in valet, the alarm is disabled  
Siren is disabled for sensor triggers; remote is paged for all trig-  
gers (sensor silent arm)  
Siren is disabled for all triggers; remote is paged for all triggers  
(full silent arm)  
+ ALL  
On during warn-away and full trigger message output  
On during trunk zone full trigger output and aux/trunk channel  
activation  
On during fault report to indicate the trunk is open and  
bypassed when arming  
© 2009 Directed Electronics. All rights reserved.  
8
Icon  
Description  
On during a sensor zone full trigger output  
On during fault report to indicate a sensor is active and  
bypassed when arming  
On during the door zone full trigger output  
On during fault report to indicate a door is open and bypassed  
when arming  
On during a hood zone full trigger output  
On during fault report to indicate the hood is open and  
bypassed when arming  
On when remote is set to command the system programmed  
as car 1*  
On when remote is set to command the system programmed  
as car 2*  
Bars indicate battery level is full, ¾,½,¼ or empty  
On while the remote control is transmitting a command  
On while the remote control is receiving a message  
On with out of range fault tone to indicate the remote failed to  
receive a command confirmation  
Pager on: The remote will wake up to listen for messages  
Pager off: The remote will not wake up to listen for messages  
The remote will vibrate when messages are received  
The remote will emit beeps and tones when messages are  
received  
© 2009 Directed Electronics. All rights reserved.  
9
Icon  
Description  
Text field  
Displays the clock, message text and feature menus  
On after the garage open** message has been received  
On after the garage closed** message has been received  
Remote start is active, the engine is running (with optional  
remote start module only)  
* This icon not present until the car 2 is turned on in the Setup Remote  
configuration menu.  
** This icon not present until the remote is paired with an optional  
garage door opener.  
© 2009 Directed Electronics. All rights reserved.  
10  
Using your System  
Commands and Confirmations  
Commands, basic or advanced, are used to activate system fea-  
tures and are performed by pressing one of the command buttons.  
Basic commands control the most often used security features while  
advanced commands control more specialized features and request  
reports.  
Confirmations for basic or advanced commands are indicated  
first by siren chirps and parking light flashes, and then by text, icons  
and beeps or tones on the remote control. A description of each  
feature confirmation is found in the Basic Commands and Advanced  
Commands sections.  
Performing Commands  
Perform basic commands by pressing one of the command buttons  
while in the direct access level. Direct access is available while the  
text field displays the clock. Perform advanced commands by first  
accessing one of the function Levels and then pressing one of the com-  
mand buttons while within a level. Function Levels are available when  
the text field displays LEVEL 1,2,3 or 4.  
Advanced Command example: Silent Arm  
1. Press the  
button once to access function level 1, the text  
LEVEL 1  
field will display  
.
LEVEL 1  
2. Press the  
button while  
text is still on to perform the  
silent arm command.  
SILENT ARMED  
3. The Responder LC remote will display  
text field and update the status screen icons.  
in the  
© 2009 Directed Electronics. All rights reserved.  
11  
Responder LC Command table  
Direct Access  
Level  
Button  
x 1  
x 2  
x 3  
x 4  
LEVEL 1  
LEVEL 2  
LEVEL 3  
LEVEL 4  
Arm/Lock  
(Panic)  
Silent Arm  
Sensor  
Bypass  
Sensor Silent Full Silent  
Arm  
Arm  
Disarm/Unlock Silent Disarm Remote Valet Car Finder  
Remote Start*/  
Aux 1/4**  
Aux/Trunk  
AUX 1  
AUX 2  
AUX 3  
AUX 4  
A
U
X
Advance Level  
Change Car  
(3s), Enter  
programming  
(8s)  
Alarm  
Report  
*
Available only with optional remote start module installation  
** This button can command either aux 1 or aux 4 if turned on by  
an authorized Directed dealer.  
© 2009 Directed Electronics. All rights reserved.  
12  
Basic Commands (Direct Access)  
Arm  
Press and release  
6:30  
The alarm arms, doors lock (if connected), and the siren  
chirps and parking lights flash once. The  
ARMED  
text and beeps play  
to confirm and the system status icons update. If valet mode* is on,  
VALET  
the doors lock and the  
arm the alarm normally.  
text and tone play. Exit valet mode to  
If a trigger zone fault is detected the siren chirps once again and the  
trigger zone fault report** plays.  
To Arm and Panic  
Press and hold  
The alarm arms (or locks in valet) and, after 2 seconds, sounds  
PANIC  
the siren and flashes the parking lights. The  
text and  
siren tones play to confirm. Press the  
or  
button to stop  
the output.  
Disarm  
Press and release  
The alarm disarms, doors unlock (if connected), and the siren chirps  
DISARM  
and parking lights flash twice. The  
text and beeps play to  
confirm and the system status icons update. If valet mode* is on, the  
VALET  
doors unlock and the  
text and tone play.  
More than 2 siren chirps and remote beeps indicate a trigger has oc-  
DISARM  
curred. The  
text is replaced by the alarm report.**  
© 2009 Directed Electronics. All rights reserved.  
13  
AUX/Trunk  
Press and hold  
AUX  
The trunk opens (if connected) when this button is pressed for 2 sec-  
TRUNK  
onds. The  
text and tones play to confirm.  
Remote Start /AUX 1/ AUX 4  
Press and release  
Remote Start***  
Activates (or if on, deactivates) the remote starter. The engine and  
REMOTE START ON  
parking lights turn on or off accordingly. The  
REMOTE START OFF  
text and tones play, or the  
text and tones play  
to confirm. The  
icon is displayed in the status screen while the  
engine is running.  
AUX 1/AUX 4****  
Activates (or if on, deactivates) the aux 1 or aux 4 output. The  
programmed text and on tones or off tones play to confirm, (See  
System Expansion Options).  
*
**  
See Remote and System Operations for details.  
See Alarm Features for details.  
*** Available only with optional Remote Start module installation.  
**** This feature must be turned on by an authorized Directed dealer.  
© 2009 Directed Electronics. All rights reserved.  
14  
Advanced Commands: (Level 1)  
Press and release the  
button 1 time.  
level 1  
Silent Arm  
Press and release  
The alarm arms, doors lock (if connected), and the parking lights flash  
SILENT ARMED  
once. The  
text plays to confirm and the system status  
icons update. Valet mode* or trigger zone fault report** messages  
may be received.  
Silent Disarm  
Press and release  
The alarm disarms, doors unlock (if connected), and the parking lights  
SILENT DISARM  
flash twice. The  
text plays to confirm and the system  
status icons update. The alarm report** may replace the silent disarm  
text.  
AUX 1  
Press and release  
AUX  
Activates (or if on, deactivates) the aux 1 output. The programmed  
text and on tones or off tones play to confirm, (See System Expansion  
Options).  
*
See Remote and System Operations section for details.  
** See Alarm Features for details.  
© 2009 Directed Electronics. All rights reserved.  
15  
Advanced Commands: (Level 2)  
Press and release the  
button 2 times.  
Sensor Bypass  
Press and release  
level 2  
Performing the sensor bypass command will incrementally bypass sen-  
sor operations and be confirmed as follows:  
s
s
s
Warn-away bypass: The parking lights flash  
2
times,  
BYPASS WARN  
1 beep and 1 fault tone play to confirm. Sensors  
will be activated for full trigger levels of impact only.  
Warn-away full trigger bypass: The parking lights flash 3 times,  
BYPASS FULL  
, 1 beep and 2 fault tones play to confirm. Sensors  
will not be activated for any level of impact.  
Sensor Bypass off: The parking lights flash 1 time  
BYPASS OFF  
and 1 beep play to confirm. Sensors are fully operational.  
NOT AVAILABLE  
If disarmed,  
and a fault tone will play.  
Remote Valet  
Press and release  
VALET  
Enters (or if on, exits) valet mode. The  
text and beeps (1 for  
on, 2 for off) play to confirm and the system status icons update. See  
Valet Mode for more details  
AUX 2  
Press and release  
AUX  
Activates (or if on, deactivates) the aux 2 output. The programmed  
text and on tones or off tones play to confirm, (See System Expansion  
Options).  
© 2009 Directed Electronics. All rights reserved.  
16  
Advanced Commands: (Level 3)  
Press and release the  
button 3 times.  
Sensor Silent Arm*  
Press and release  
level 3  
The alarm arms, doors lock, the siren chirps and parking lights flash 3  
SENSOR SILENT ARM  
times. The  
text and beeps play to confirm and the  
system and siren status icons update.  
Car finder  
Press and release  
The siren emits one long chirp and the parking lights flash for 10  
CAR FINDER  
seconds. The  
text and beeps play to confirm. The  
parking light flashes stop if armed or disarmed while car finder is in  
progress.  
AUX 3  
Press and release  
AUX  
Activates (or if on, deactivates) the aux 3 output. The programmed  
text and on tones or off tones play to confirm, (See System Expansion  
Options).  
© 2009 Directed Electronics. All rights reserved.  
17  
Alarm Report*  
Press and hold the  
button  
Requests a report of the most recent triggers and temporarily displays it  
in the text field. The report clears when the ignition is turned on.  
*
See Alarm Features for more details.  
© 2009 Directed Electronics. All rights reserved.  
18  
Advanced Commands: (Level 4)  
Press and release the  
button 4 times.  
Full Silent Arm*  
Press and release  
level 4  
The alarm arms, doors lock, and the siren chirps and parking lights  
FULL SILENT ARM  
flash 4 times. The  
text and beeps play to confirm  
and the system and siren icons update.  
AUX 4  
Press and release  
AUX  
Activates (or if on, deactivates) the aux 4 output. The programmed  
text and on tones or off tones play to confirm (See System Expansion  
Options).  
*
See Alarm Features for more details.  
© 2009 Directed Electronics. All rights reserved.  
19  
Responder LC Configuration  
Operations of the Responder LC and how it communicates messages  
are set in the configuration main menu.  
Navigating Menus and Options  
Navigating menus and features, changing options, and exiting are  
performed using the remote control buttons. The following instructions  
discuss how to access and configure the settings.  
Button Operation  
s
To access menus, set options, and to perform actions that are  
displayed in the text field, use the  
To scroll the menu lists in the text field use the  
To exit configuration: use the or buttons.  
button.  
AUX  
s
s
or  
buttons.  
Access Menu Items  
1. Press and hold the  
button for 8 seconds, the remote will beep  
is displayed. (If car 2 is on, ignore the car  
MAIN MENU  
once,  
select text and beep after 3 seconds).  
2. Release the button to display the main menu item list,  
is displayed.  
SETUP REMOTE  
3. The main menu has been accessed and configuring can begin.  
Use the following process to view the main menu features, op-  
tions and settings in the text field. The following actions are com-  
monly used throughout the configuration operation.  
AUX  
s
s
Press the  
or  
buttons to change the feature or option  
that is displayed in the text field.  
Press the  
button to choose the feature in the text field and  
view its options. Press it when the desired feature or option  
is in the text field to set it as the new setting.  
© 2009 Directed Electronics. All rights reserved.  
20  
Main Menu  
The following main menu list of features is available for configuration  
of the remote control.  
Setup Remote Menu:  
Keypad Lock  
OFF AUTO  
Options:  
,
OFF  
When  
, the buttons do not lock and always perform a com-  
AUTO  
mand when pressed. When set to  
, the buttons lock after  
a 20 second lapse between buttons presses to prevent uninten-  
tional operations. If a button is pressed when locked a fault tone  
plays as an alert followed by unlock instructions in the text field.  
To unlock the buttons, press the  
button. The unlock tones play and  
button followed by the  
READY  
is displayed in the text  
field, a command can now be performed.  
Auto unlocking  
After turning the ignition off, a message to the remote will unlock  
the buttons until a command is performed. If auto unlocking is not  
desired this feature can be turned off by an authorized Directed  
dealer.  
Page Mode  
Options:  
POWER SAVE OFF  
ON  
,
,
Paging is how the Responder LC remote control monitors your  
POWER SAVE  
systems messages.  
extends battery life by turning  
paging off after 72 hours if the remote control is not used during  
© 2009 Directed Electronics. All rights reserved.  
21  
this period. Just press any button to resume system monitoring.  
ON  
When set to  
it wakes up every few seconds to listen for  
OFF  
pages from the system. When set to  
receive alarm trigger pages.  
it does not wake up to  
OFF  
Note: When  
, responses are still received when a command  
is performed but alarm trigger pages will not be received.  
Page Alert  
Options:  
TONE VIBE TONE  
VIBE  
SCREEN ONLY  
,
,
,
There are several ways for the Responder LC to alert you when it  
has received a message from the system.  
TONE VIBE  
will alert by both emitting tones and vibrating the re-  
TONE  
mote. Select  
to be alerted by tones that are unique for  
VIBE  
each message. Select  
and the Responder LC will silently  
SCREEN ONLY  
alert you with a gentle vibration, or select  
don’t want to be interrupted.  
when you  
Remote Start Info  
RUNTIME  
TEMP CLOCK  
Options:  
,
,
These options are only available when paired to a Directed Elec-  
tronics remote start or remote start and security system.  
Runtime Alert  
ON  
OFF  
Options:  
,
These options are only available when paired to a Directed Elec-  
tronics remote start or remote start and security system.  
© 2009 Directed Electronics. All rights reserved.  
22  
Car 2  
Options:  
OFF  
ON HOME  
,
,
This remote can control two systems independently. When set to  
OFF  
ON  
, the car 2 select option is not available. When set to  
HOME  
the remote can be set to control 2 systems. The  
for pairing to a home security system.  
option is  
BackLight  
Options:  
OFF  
ON  
,
OFF  
ON  
The status screen backlighting can be  
illuminate during remote operations.  
, or when  
will  
Temp Unit  
Options:  
F
C
,
These options are only available when paired to a Directed Elec-  
tronics remote start or remote start and security system.  
Button Beep  
ON  
OFF  
Options:  
,
ON  
When set to  
, the remote will emit a beep as confirmation  
OFF  
of a button press. When set to  
button presses.  
, beeps are not emitted for  
System Type  
SEC RKE  
Options:  
,
© 2009 Directed Electronics. All rights reserved.  
23  
Selects the type of system, namely; security or remote keyless  
entry to which the remote has been paired, and adjusts the text  
and main menu accordingly. This has been pre-set by the factory  
for your system.  
Clock Set  
Options:  
HOUR MIN  
,
The clock is formatted for 12 hour mode with AM or PM in-  
dicated. Once the desired time is set return to one of the text  
HOUR  
MIN  
BACK  
displays (  
/
/
) before exiting to save the new  
time. Exiting clock set while time is still in the display will revert  
to the previous setting.  
Review  
Displays firmware version  
Exit  
Exits and returns to the main menu  
Sensor Adjust:  
If you feel your security system shock sensor is too sensitive or not  
sensitive enough, it is highly recommended that you contact your au-  
thorized Directed dealer/professional and have the sensor adjusted  
for optimized security detection performance.  
Pair a Responder LC remote control:  
Pairing is a process where the Responder LC and the system in the  
vehicle learn each others encrypted identification, securing their com-  
munication from intruders. Please note that your remote controls come  
pre-programmed from the factory.  
© 2009 Directed Electronics. All rights reserved.  
24  
Prepare the system  
1. Open a door.  
2. Turn the ignition on.  
3. Press and release then press and hold the control center button.  
The control center LED flashes and the siren chirps one time to  
confirm the system is prepared.  
4. Release the control center button and proceed below.  
Note: Begin pairing within 60 seconds or the system will exit (indi-  
cated by a long siren chirp) and will need to be prepared again.  
Prepare the remote control  
Select the desired Car 1 (Default) or Car 2 operation before proceed-  
ing.  
1. Press and hold the  
button of the remote control until a long  
MAIN MENU  
beep is emitted and  
is displayed (If programmed to  
operate two systems, confirm the correct car 1 or car 2 text and  
beeps at 3 seconds).  
REMOTE SETUP  
2. Release the  
displayed.  
3. Press and release the  
displayed.  
button to view the main menu.  
is  
is  
PAIR REMOTE  
button two times.  
PAIR  
4. Press and hold the  
release it.  
button until  
is displayed, and then  
5. Press and hold the  
SUCCESS  
button until the siren emits a long chirp.  
is displayed with a sequence of chimes.  
FAILED  
Note: If  
is displayed, make sure the system is still pre-  
pared and repeat step 5 until successful.  
Demo Mode:  
Demo mode plays a pre-selected group of animations as a demonstra-  
© 2009 Directed Electronics. All rights reserved.  
25  
tion tool to show friends or family. Running demo mode shortens the  
battery life over time if used excessively  
SINGLE SILENT  
s
s
s
: The remote will display a selection of icons on  
the status screen without beeps and tones then stop  
: The remote will display a selection of icons on  
the status screen with beeps and tones then stop  
SINGLE SOUND  
LOOP SILENT  
: The remote will display a selection of icons on  
the status screen without beeps and tones in an endless loop until  
the battery charger is disconnected.  
LOOP SOUND  
s
: The remote will display a selection of icons on  
the status screen with beeps and tones in an endless loop until the  
battery charger is disconnected.  
Note: Loop silent and loop sound are not available and will not appear  
in the demo mode menu unless the battery charger is connected.  
Power Off:  
When an extended period of non-operation is anticipated, turning the  
power off will preserve the battery charge. Press the  
button while  
POWER OFF  
is displayed. The status screen icons clear as the power  
off tones play, the remote is turned off.  
To turn the remote on, Press and hold the  
button for 3 seconds,  
the status screen icons refresh as the power on tones play. The remote  
also turns itself on and begins charging when the battery charger is  
connected.  
Exit:  
EXIT  
To return to normal operation, press the  
played.  
button while  
is dis-  
© 2009 Directed Electronics. All rights reserved.  
26  
Alarm Features  
Normal Arm Protection  
Control center LED: The control center LED flashes as a visual indicator  
that your vehicles security system is active.  
Starter Kill: The failsafe starter kill relay prevents the engine from start-  
ing  
May require additional parts and installation  
Note  
Sensor triggers: The onboard shock sensor can distinguish minor im-  
pacts from major impacts to the vehicle exterior. Minor impacts causes  
the system to emit a warn-away output by chirping the siren and flash-  
ing the parking lights for 3 seconds. Major impacts caused for exam-  
ple by a forcible entry attempt, results in a full trigger output. The siren  
sounds and the parking lights flash for 30 seconds or longer. Both  
warn-away and full triggers send a message to the remote control.  
Point of entry triggers: Opening the hood or trunk causes a full trig-  
ger output, while opening a door or turning on the Ignition causes the  
siren to chirp 3 seconds before beginning the full trigger output. This  
3 second delay allows time to disarm and silence the siren in case of  
accidental trigger. The full trigger message is still sent to the remote.  
Sensor Silent Arm Protection  
Sensor warn-away and sensor full trigger activations only send mes-  
sages to the remote, while the parking light flash and siren outputs are  
defeated. Point of entry triggers will activate the parking light flash,  
siren, and send messages normally.  
© 2009 Directed Electronics. All rights reserved.  
27  
Full Silent Arm Protection  
Sensor warn-away, sensor full trigger and point of entry activations  
will only send messages to the remote, with parking light flash and  
siren outputs defeated.  
Sensor Warn-away Messages  
When the remote receives a sensor warn-away message it emits 10  
SENSOR WARN  
beeps (if on) and displays a sensor zone specific  
text  
for 30 seconds. Warn-away messages cannot be reviewed or dis-  
played in reports.  
Full Trigger Messages  
A full trigger message generates a full trigger output of siren tones and  
TRIGGER  
zone specific  
text followed by an alert that consists of 1  
long beep per minute for 10 minutes.  
To stop the output and alert, press a command button to perform a  
command, or Press the  
button.  
Emergency Override  
The following procedure disarms the system when a programmed re-  
mote is not available. Number of presses__________  
1. Turn the ignition on.  
2. Press the control center button the correct number of times  
(the default is 1 press).  
3. After a few seconds the siren output ceases and the system  
is disarmed.  
As a precaution, if programmed for passive arming or auto  
re-arming the system should be placed into valet mode until  
a remote is available .  
Note  
© 2009 Directed Electronics. All rights reserved.  
28  
Trigger Zone Fault Report  
When armed by remote command the system runs a status check  
of the alarm trigger zones. Faulty zones (usually caused by dome  
light delay or open trunk) are bypassed and reported via the control  
center LED and remote, while all other trigger zones remain active  
and are monitored to protect the vehicle. Should a faulty zone self  
correct (dome light turns off) it becomes active and is then monitored  
normally.  
The siren chirps once again a few seconds following the arming  
chirps as an audible alert, the control center LED flashes in groups to  
indicate the zone number. The remote will emit a single fault tone and  
play zone specific text that identifies the faulty zones.  
Alarm Report when Disarming  
The most recent alarm triggers (if any) are reported when the alarm is  
disarmed via the remote control, siren chirps, parking light and control  
center LED flashes. The siren chirps 4 times (or 5 times if NPC on*),  
the parking lights flash 3 times, and the control center LED flashes in  
groups to indicate the last two zones that were triggered (see Table  
DISARM  
ALARM REPORT  
of Zones). The  
text is replaced by  
and text  
identifying the triggers. The report output will repeat for each disarm  
operation until the vehicle is driven.  
* See Nuisance Prevention (NPC) for more details.  
© 2009 Directed Electronics. All rights reserved.  
29  
Table of Zones  
Zone Name  
Zone # (led flashes)  
1
2
3
4
5
6
7
Trunk  
Shock Sensor  
Door  
Sensor 2  
Ignition  
Hood  
Sensor 3  
Alarm Report when Requested  
The alarm report displays the two most recent alarm triggers depend-  
ing on the system state when requested. When disarmed, the report  
will display text to identify the two most recent triggers since the ve-  
hicle was last driven. When armed, the report will display text to  
identify the two most recent triggers since the system was armed.  
The Alarm Report clears when ignition is turned on.  
Note  
Nuisance Prevention (NPC)  
NPC monitors all alarm zones and, if any are triggered excessively,  
bypasses them until corrected. If a point of entry (trunk, hood, door)  
is left open following a forced entry, it is bypassed. It becomes active  
again only after being closed.  
Bypassed sensors automatically reset after one hour and after the  
vehicle is driven. Disarming then re-arming the alarm does not reset  
bypassed sensors.  
© 2009 Directed Electronics. All rights reserved.  
30  
Remote and System Operations  
Passive Arming*  
Park and exit the vehicle, after the doors are closed the passive arm-  
ing countdown begins. The control center LED flashes quickly and  
upon reaching 20 seconds the siren then chirps once. At 30 seconds  
the system arms itself.  
Anytime before the system arms you can re-enter the vehicle or  
open the trunk to load or unload items and, after closing passive arm-  
ing resumes.  
To stay secure in the case of accidentally disarming the system, if  
a door is not opened within 30 seconds the system re-arms itself and  
locks the doors.  
Auto Re-arming*  
Auto re-arm ensures the vehicle stays protected if it is not entered after  
disarming by remote control. After disarming by remote, the alarm  
automatically re-arms itself (and locks the doors if programmed on) in  
30 seconds. Open any point of entry to stop the re-arm until the next  
disarm by remote.  
Onetime Bypass*  
Turn the ignition on for one to three seconds and then off. The siren  
chirps once to confirm one-time bypass is enabled.  
One-time bypass can be used to temporarily bypass the passive arm-  
ing operation for one cycle. It also bypasses the comfort closure and  
auxiliary channel outputs programmed to activate when arming. After  
the next disarm all operations return to normal.  
* These features must be turned on by an authorized Directed dealer.  
© 2009 Directed Electronics. All rights reserved.  
31  
Valet Mode  
Valet mode can be entered and exited by performing the remote valet  
command or manually using the vehicle key and the control center  
button. When entered, the alarm functions are defeated while the  
convenience features still operate normally.  
Arm and disarm commands lock and unlock the doors while the  
VALET  
text and beeps play to confirm.  
Use the following steps to manually enter and exit valet mode:  
1. Turn the ignition switch on and then off  
2. Immediately press and release the control center button once  
3. The control center LED turns on when entering and off when exit-  
ing.  
Power Save  
To reduce power consumption the control center LED modifies its out-  
put if the vehicle is parked for an extended period. If armed the flash-  
ing is reduced after 24 hours. When valet mode is on the control  
center LED will turn off after 1 hour and will reset each time the ignition  
is turned off.  
Rapid Resume  
If power is ever disconnected by a mechanic or thief, the system will  
resume the state it was in at the time of disconnection, when power  
is reconnected.  
Automatic Remote Updates  
The system sends a silent message to all remote controls after any  
major action has occurred. When the remote receives this message it  
updates the status screen icons. This way all users are able to quickly  
review the system status just by accessing the status screen.  
© 2009 Directed Electronics. All rights reserved.  
32  
Out of Range  
Each time a command is performed the remote will expect a com-  
mand confirmation from the system. If a command confirmation is not  
received the out-of-range icon ( ) and a fault tone will play as an  
alert.  
No Remote Output  
Occasionally when a command is performed the remote may not  
generate a command confirmation output or out of range output. This  
indicates that the system received the command but it was an incom-  
plete command (e.g. aux button pressed too short to activate the trunk  
release) or it was an illegal message (e.g. the command was cor-  
rupted due to local RF interference). These are temporary normal func-  
tions of the system and remote, perform the command again within 10  
seconds to return to normal operation.  
Car Select  
Car 2 must first be turned on (See Responder LC Configuration and  
Main Menu sections to turn on).  
Two Way Remote  
1. Press and hold the  
button for 3 seconds or until the remote  
CAR 1  
beeps. The  
or  
icon flashes and the text  
or  
CAR 2  
is displayed.  
2. Change car: While in this mode press the  
button to switch  
between cars and the  
or  
icon changes accordingly  
indicating which car the remote currently operates.  
3. Select the car you want to operate and then press any com-  
mand to operate the system. The selected car remains selected  
until the setting is changed.  
© 2009 Directed Electronics. All rights reserved.  
33  
Vehicle Recovery System (VRS)  
In case your vehicle is stolen or carjacked, VRS sounds the siren and  
flashes the parking lights to persuade the thief to abandon the vehicle,  
and when the ignition is turned off, activates the starter kill to prevent  
the engine from restarting.  
To arm VRS, perform the silent arm command while driving, or while  
the ignition is turned on. The siren chirps and parking lights flash once  
ARMED  
to confirm arming. The  
text and beeps play, and the system  
status icons update to confirm arming.  
NOT AVAILABLE  
If valet mode is on, the  
text and tone plays, exit valet  
mode before arming VRS.  
Once armed, VRS triggers if any door is opened then closed while  
the ignition remains on, and if the vehicle is parked while armed, VRS  
triggers when driving resumes. See trigger description below.  
When triggered, the control center LED begins flashing after fifteen  
seconds. Within 45 seconds perform the silent disarm command to  
disarm VRS. If not disarmed, the siren begins chirping for 60 seconds  
and then becomes a constant siren blast with flashing parking lights  
for several minutes. This output will continue and be repeated each  
time the ignition is turned on until VRS is disarmed.  
To disarm, perform the silent disarm command anytime before VRS  
has been triggered, or within one minute after it has triggered and be-  
fore the siren begins to chirp. If not disarmed before the siren begins  
to chirp, the emergency override procedure must be used to disarm  
VRS.  
© 2009 Directed Electronics. All rights reserved.  
34  
1-way Companion Remote Control  
Transmit  
LED  
Command  
Buttons  
AUX  
Function  
Button  
Direct Access  
Level  
Button  
x 1  
x 2  
x 3  
x 4  
LEVEL 1  
LEVEL 2  
LEVEL 3  
LEVEL 4  
Arm/Lock  
(Panic)  
Silent Arm  
Sensor  
Bypass  
Silent Disarm Remote Valet Car Finder  
Sensor Silent Full Silent  
Arm  
Arm  
Disarm/  
Unlock  
Remote  
Start*/Aux  
1/4**  
Aux/Trunk  
AUX 1  
AUX 2  
AUX 3  
AUX 4  
AUX  
Not Used  
Used to access function levels for advanced commands  
with multiplier in top row implies button presses)  
(
*
Available only with optional remote start module installation  
** This feature must be turned on by an authorized Directed dealer.  
© 2009 Directed Electronics. All rights reserved.  
35  
Using the 1-way Companion remote  
The 1-way companion remote commands the system features as  
shown in the previous table, but only transmits and does not provide  
feedback as with the 2-way remote control. Siren chirps and parking  
light flashes are used to indicate that a command has been received  
and activated as described in the Basic Commands and Advanced  
Commands sections.  
Accessing Commands  
Similar to the Responder LC remote, basic commands are performed  
when a command button is pressed directly. To perform advanced  
commands press the  
levels. For example;  
button one to four times to access function  
x4 in the table implies pressing four times  
to reach level 4. The transmit LED flashes in groups of 1 to 4 for a few  
seconds to indicate the respective level. Press the desired command  
button while the transmit LED is flashing to perform the command.  
Button Auto Lock  
When on, the remote control buttons lock if more than 20 seconds  
lapses between button presses. If a button is pressed when locked,  
the remote control appears to be non-operational and will not transmit  
a command or illuminate the transmit LED. To unlock the buttons; press  
the button followed by the  
button.  
Car Select  
Car 2 must first be turned on (See Remote Features menu under Pro-  
gramming section below to turn on). Press and hold the  
button  
for 3 seconds. The remote flashes the transmit LED once or twice to  
indicate the selected car is 1 or 2.  
Release the  
button, then press and release while the transmit  
LED flashes to perform car select. Once the car is selected a command  
© 2009 Directed Electronics. All rights reserved.  
36  
can be performed by pressing one of the command buttons.  
Programming  
To enter; hold the  
button for 8 seconds until the transmit LED turns on,  
the programming main menu has been accessed (If programmed to  
operate two systems, ignore the transmit LED flashes at 3 seconds).  
To exit; press and release the  
button to go back and repeat to exit.  
The transmit LED turns off when programming is exited.  
Sensor Adjust  
The  
button is used for sensor adjustment, to avoid unintended  
alarm triggers, it is recommended that an authorized Directed  
dealer perform all sensor adjustments.  
Remote Features Menu  
Press and release the  
button, 2 transmit LED flashes indicate  
the remote features menu is accessed and can be set. Press the  
buttons indicated below, 1 flash turns the feature on, 2 flashes  
turns the feature off.  
s
s
Autolock feature: Press  
Car 2 feature: Press  
to turn on/off.  
to turn on/off.  
Remote Learning  
Press the button,3 transmit LED flashes indicates the remote is  
ready to program to the system.  
Per the instruction in Pair the Responder LC remote control under  
the Main Menu section of this guide, following step 3 of Prepare  
the system. Press and hold the  
button, the siren emits one  
long chirp to confirm the remote has been learned.  
© 2009 Directed Electronics. All rights reserved.  
37  
Battery Information (1-way)  
The 1way companion remote is powered by one 3V coin cell lithium  
battery (PN CR-2032) that will last approximately one year under  
normal use.  
Low Battery Alerts  
When disarming the system using a remote with a low battery the  
siren will emit one additional chirp as an alert. If confirmation chirps  
are programmed off, the system will still emit one chirp as an alert  
when disarming.  
Battery Replacement  
1.  
Using a small  
flathead screwdriver,  
insert into slot located  
at the bottom of the  
keypad and carefully  
pry the front of the unit  
open.  
2.  
Turnboththeunit  
front and circuit board  
over, remove battery  
from clip and replace  
while observing the  
correct polarity .  
3. With the front and circuit board still turned over, turn back portion  
of unit onto both parts, reposition all parts and snap together.  
© 2009 Directed Electronics. All rights reserved.  
38  
System Expansion Options  
Controlling Two Vehicles (car select)  
The Responder LC and 1way companion remote can control systems  
in two different vehicles saving the need for multiple remote controls.  
This feature also allows for customized system configurations on each  
vehicle that has more than one driver. See following Owner Recogni-  
tion for details.  
Owner Recognition  
The system can be configured to recognize the remote used when  
disarming and change selected features to match the remote users  
preferences. Memory seat adjustment, siren chirps, passive arming,  
remote button auto unlocking, alarm output duration can all be custom  
set for each remote user at the time of installation.  
Comfort Closure  
Comfort closure emulates turning the key in the door cylinder or hold-  
ing the lock button of an OEM keyless entry. It will automatically close  
the windows and sunroof on vehicles with this type of OEM conve-  
nience feature.  
Alarm Output Duration  
The length of time the siren sounds can be adjusted from 1 to 180  
seconds at the time of installation.  
Arming and Warn-away Chirp Control  
The system arm, disarm and sensor warn-away chirps can be config-  
ured for those that prefer a custom silent alarm operation.  
© 2009 Directed Electronics. All rights reserved.  
39  
Driver Door Priority Unlocking  
The door unlocking operation can be configured to emulate an OEM  
style of driver priority unlocking for added security during disarming.  
Auxiliary Channels  
The auxiliary channel outputs of this system can activate many of the  
convenience features found in todays vehicles. Once a command is  
performed to activate a convenience feature the Responder LC dis-  
plays text that matches the feature. The system installer can clarify if  
any of the below listed features are compatible with your vehicle.  
s
s
s
s
s
s
s
s
Trunk release  
Widows open/close  
Left sliding door open/close  
Right sliding door open/close  
Rear hatch open/close  
Sunroof open/close  
Audio system  
Headlights  
© 2009 Directed Electronics. All rights reserved.  
40  
Battery Information (Responder LC)  
The Responder LC remote control is powered by an internal recharge-  
able battery that can be serviced only through an authorized Directed  
Electronics dealer. The information and precautions in this section can  
help maximize your batterys life and usage in providing your Re-  
sponder LC remote control with many years of trouble free operation.  
The battery information for the 1way companion remote control can  
be found in the 1-way Companion Remote Control section of this  
manual.  
Warnings! NEVER connect the supplied AC adapter  
to products other than the Responder LC remote con-  
trol. It is a high current device designed specifically for  
rapid charging of the Responder LC battery and may  
cause severe damage or explosion when connected to  
any other products.  
Charging the battery when the temperature is below  
32°F (0°C) or above 113°F (45°C) may cause severe  
battery damage and/or reduce battery life. Avoid  
placing the remote control in areas exposed to ex-  
treme cold or heat (direct sunlight) when charging the  
battery.  
Low Battery  
After a command is performed the Responder LC and 1way com-  
panion remote controls check their battery level and, when the level  
requires attention, will begin generating alerts. Once the alerts begin  
they will continue to command the system for several days but should  
be charged at the earliest opportunity or failure to control the system  
© 2009 Directed Electronics. All rights reserved.  
41  
may occur.  
Low Battery Alerts  
When disarming the system using a remote with a low battery the  
siren will emit one additional chirp as an alert. If confirmation chirps  
are programmed off, the system will still emit one chirp as an alert  
LOWBAT  
when disarming. After performing a command,  
and several  
beeps play on the Responder LC remote to indicate the battery needs  
to be charged.  
To preserve power at critically low battery levels the  
Responder LC turns the pager off and stops receiving  
messages from the system. It will continue to command  
the system until the battery can be charged.  
Important  
Battery Life  
The Responder LC remote control has many features that make it one  
of the most unique remote controls on the market today. The default  
feature settings provide for excellent battery charge duration. How-  
ever, to maximize this duration between charges, the following sug-  
gestions will help:  
s
s
Turn the remote off: When not in use and/or out of range of the  
vehicle the remote can be turned off in the main menu.  
Turn Paging off: The remote will not wake up to check for mes-  
sages with paging off in the setup remote menu.  
Note: The remote will not receive trigger messages from the sys-  
tem.  
s
Turn Beeps off: The button beeps can be turned off in the setup  
remote menu. The command beeps still play normally.  
© 2009 Directed Electronics. All rights reserved.  
42  
Battery Disposal  
Directed Electronics cares about the environment. If you  
need to dispose of the battery, please do so in accordance  
with your municipal requirements for battery disposal.  
© 2009 Directed Electronics. All rights reserved.  
43  
Glossary of Terms  
Document Terminology  
Control Module  
The “brain” of your system. Usually hidden underneath the  
dash area of the vehicle. It houses the microprocessor which  
monitors your vehicle and controls all of the systems func-  
tions.  
Responder LC (2-way A hand-held, remote control which operates the various func-  
Remote Control)  
tions of your system and receives messages and pages from  
the system.  
Companion Remote A hand-held, remote control which operates the various func-  
(1-way Remote Con- tions of your system but does not provide message display..  
trol)  
Control Center  
The control center contains the systems radio-frequency anten-  
na, the control center button and LED. For maximum remote-  
control range, the control center is usually located at the top of  
the windshield, centered near the rear-view mirror.  
Control Center LED  
A light used to indicate the status of your system. It is located  
on your systems control center.  
Control Center Button A small push button located on your systems control center.  
It is used to override (disarm) the alarm when a remote is not  
available or to enter or exit valet mode.  
© 2009 Directed Electronics. All rights reserved.  
44  
© 2009 Directed Electronics. All rights reserved.  
45  
Government Regulations  
This device complies with Part 15 of FCC rules. Operation is subject to the fol-  
lowing two conditions: (1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference  
that may cause undesirable operation.  
This equipment has been tested and found to comply with the limits for a class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates and can radiate radio frequency en-  
ergy and, if not installed and used in accordance with the instruction manual,  
may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television, which can be  
determined by turning the equipment OFF and ON, the user is encouraged to  
try to correct the interference by one or more of the following measures:  
s 2EORIENT OR RELOCATE THE RECEIVING ANTENNAꢀ  
s )NCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVERꢀ  
s #ONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH  
the receiver is connected.  
s #ONSULT THE DEALER OR AN EXPERIENCED RADIO ꢁ 46 TECHNICIAN FOR HELPꢀ  
This device complies with the Industry Canada Radio Standards Specification  
RSS 210. Its use is authorized only on a no-interference, no-protection basis;  
in other words, this device must not be used if it is determined that it causes  
harmful interference to services authorized by IC. In addition, the user of this  
device must accept any radio interference that may be received, even if this  
interference could affect the operation of the device.  
WARNING! Changes or modifications not expressly approved by the party  
responsible for compliance could void the users authority to operate this de-  
vice.  
© 2009 Directed Electronics. All rights reserved.  
46  
Additional information  
Interference  
All radio devices are subject to interference which could affect proper  
performance.  
Upgrades and Batteries  
Any upgrades to this product and/or installation of batteries must be  
performed by an authorized dealer. Do not attempt to perform any  
unauthorized modifications to this product.  
Water/Heat Resistance  
This product is not designed to be water and/or heat-resistant. Please  
take care to keep this product dry and away from heat sources. Any  
damage from water or heat will void the warranty.  
© 2009 Directed Electronics. All rights reserved.  
47  
Limited lifetime consumer warranty  
Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace  
(at Directeds election) with a comparable reconditioned model any Directed unit (hereaf-  
ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated  
sensors and accessories, which proves to be defective in workmanship or material under  
reasonable use during the lifetime of the vehicle provided the following conditions are  
met: the unit was purchased from an authorized Directed dealer, the unit was profession-  
ally installed and serviced by an authorized Directed dealer; the unit will be professionally  
reinstalled in the vehicle in which it was originally installed by an authorized Directed  
dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the  
bill of sale or other dated proof of purchase bearing the following information: consumers  
name, telephone number and address; the authorized dealers name, telephone number  
and address; complete product description, including accessories; the year, make and  
model of the vehicle; vehicle license number and vehicle identification number. All com-  
ponents other than the unit, including without limitation the siren, the remote transmitters  
and the associated sensors and accessories, carry a one-year warranty from the date of  
purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR  
WITHOUT PROOF OF PURCHASE WILL BE DENIED. This warranty is non-transferable  
and is automatically void if: the original purchaser has not completed the warranty card  
and mailed it within ten (10) days from the date of purchase to the address listed on the  
card; the units date code or serial number is defaced, missing or altered; the unit has  
been modified or used in a manner contrary to its intended purpose; the unit has been  
damaged by accident, unreasonable use, neglect, improper service, installation or other  
causes not arising out of defects in materials or construction. The warranty does not cover  
damage to the unit caused by installation or removal of the unit. Directed, in its sole  
discretion, will determine what constitutes excessive damage and may refuse the return  
of any unit with excessive damage.  
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING  
BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY  
OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF  
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED;  
AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY  
TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION  
WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY  
FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED  
DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT,  
ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A  
GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE  
AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY  
© 2009 Directed Electronics. All rights reserved.  
48  
LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT,  
DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR  
COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR  
ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM  
OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE  
SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS  
AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE  
MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY  
LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.  
DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER,  
INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL  
DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF  
EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE  
LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A  
LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO  
THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT  
HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED  
DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE  
USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER  
CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.  
Some states do not allow limitations on how long an implied warranty will last or the  
exclusion or limitation of incidental or consequential damages. This warranty gives you  
specific legal rights and you may also have other rights that vary from State to State.  
This warranty is only valid for sale of product(s) within the United States of America.  
Product(s) sold outside of the United States of America are sold “AS-IS” and shall have  
NO WARRANTY, express or implied. This product may be covered by a Guaranteed  
Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call  
Directed Customer Service at 1-800-876-0800.  
Make sure you have all of the following information from your authorized Directed  
dealer:  
A clear copy of the sales receipt, showing the following:  
s
s
s
s
s
s
s
s
s
Date of purchase  
Your full name and address  
Authorized dealers company name and address  
Type of alarm installed  
Year, make, model and color of the automobile  
Automobile license number  
Vehicle identification number  
All security options installed on automobile  
Installation receipts  
920-0003 06-06  
49  
© 2009 Directed Electronics. All rights reserved.  
The company behind this system is Directed Electronics  
Since its inception, Directed Electronics has had one purpose, to provide  
consumers with the finest vehicle security and car stereo products and  
accessories available. The recipient of nearly 100 patents and Innovations  
Awards in the field of advanced electronic technology.  
Directed is ISO 9001 registered.  
Quality Directed Electronics products are sold and serviced throughout  
North America and around the world.  
Call (800) 274-0200 for more information about our products and services.  
G3303X 2009-11  
Vista, CA 92081  
© 2009 Directed Electronics—All rights reserved  
© 2009 Directed Electronics. All rights reserved.  
50  

Bracketron MULTI VEHICLE MOUNT MVM 45 05 User Manual
Datalogic Scanning POWERSCAN D8330 User Manual
Electro Voice MH940C User Manual
Fedders A6V05S2B User Manual
Friedrich Air Conditioner UE10C33 User Manual
Fujitsu Printer DL3750+ User Manual
Goodman Mfg Co LP Air Conditioner CPC180 User Manual
Goodman Mfg Co LP Air Conditioner GSX13 Split System Air Conditioner User Manual
Heat Controller DMC36CA 1 User Manual
Honda Automobiles GX25 User Manual