LASER GUIDED
PARKING SYSTEM
Model 94318
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Download from Www.Somanuals.com. All Manuals Search And Download.
PERSONAL SAFETY
1.
2.
Stay alert. Watch what you are doing, and use common sense when oper-
ating this product. Do not use this product while tired or under the influ-
ence of drugs, alcohol, or medication. A moment of inattention while operat-
ing this product may result in serious personal injury.
Wear eye protection. Wear ANSI approved safety impact goggles when assem-
bling this product.
TOOL USE AND CARE
1.
2.
Do not force this product. Use the correct product for your application. The
correct product will do the job better and safer at the rate for which it is designed.
Do not use the Laser Guided Parking System if it does not automatically
turn on or off. Any laser product that cannot be controlled is dangerous and
must be replaced.
3.
4.
Store idle tools and equipment out of reach of children and other untrained
persons. Tools and equipment are dangerous in the hands of untrained users.
Maintain this product with care. Properly maintained tools and equipment are
less likely to malfunction and are easier to control. Do not use damaged tools
and equipment. Tag damaged tools and equipment “Do not use” until repaired.
5.
6.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly main-
tained tools.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazard-
ous when used on another product.
SERVICE
1.
2.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SKU 94318
For technical questions, please call 1-800-444-3353
PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC SAFETY RULES AND PRECAUTIONS
1.
2.
3.
4.
Do not attempt to alter the Laser Guided Parking System or replace its
parts with different parts. Doing so may result in hazardous radiation exposure.
Make sure the Laser Guided Parking System automatically shuts off prior to
leaving the parking area.
Do not use the Laser Guided Parking System if it has been dropped, dam-
aged, or immersed in liquid.
Maintain labels and nameplates on the Laser Guided Parking System.
These carry important information. If unreadable or missing, contact Harbor
Freight Tools for a replacement.
5.
6.
Industrial applications must follow OSHA guidelines.
Do not allow children and other unauthorized people to handle or play with
the Laser Guided Parking System.
7.
Use the product for the job. Do not attempt to force small tools and equip-
ment to do the work of larger industrial tools and equipment. There are certain
applications for which this product was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this product,
and do not use this product for a purpose for which it was not intended.
8.
9.
Store idle tools and equipment. When not in use, the Laser Guided Parking
System must be stored in a dry location to inhibit rust. Always lock up the prod-
uct and keep out of reach of children and other unauthorized people.
Do not operate this product if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the Laser Guided Parking System.
10.
11.
WARNING!
People with pacemakers should consult their physician(s) before
using this product. Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.
WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SKU 94318
For technical questions, please call 1-800-444-3353
PAGE 4
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 8 are
included. If any parts are missing or broken, please call Harbor FreightTools at the number
shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
1.
NOTE: Prior to installation, all surfaces must be flat and free of any oil, dirt, and
debris.
2.
3.
Open the garage door, and park your vehicle(s) outside.
Unplug the overhead garage door opener from its electrical outlet. Remove the
light bulb cover. Then, unscrew and remove the light bulb.
4.
5.
Screw the AC Adapter with Pull Chain (5) into the light bulb socket.
(See Figure A.)
Plug the Power Pack (4) into the AC Adapter with Pull Chain (5).
(See Figure A.)
AC ADAPTER
W/PULL CHAIN
(5)
LIGHT BULB COVER
POWER PACK
(4)
FIGURE A
POWER PACK CONNECTORS
SKU 94318
For technical questions, please call 1-800-444-3353
PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
7.
Screw the light bulb into the AC Adapter with Pull Chain (5). Then replace the
light bulb cover on the garage door opener, making sure the light bulb cover does
not touch the light bulb.
To attach the first Swivel Mount (1), peel off its protective paper backing and press
the Swivel Mount firmly against the top/forward side of the garage door light bulb
cover on the driver’s side (as far as possible from the garage door).
For a second vehicle, attach the second Swivel Mount (1) to the opposite top
corner of the light bulb cover (as far as possible from the garage door).
8.
9.
Plug the Cables (2) into the Power Pack’s (4) Connectors.
Plug the garage door opener into its electrical outlet. Then, pull the Chain on the
AC Adapter with Pull Chain (5) to the “ON” position to turn on the Light Bulb
Socket on the AC Adapter. The outlets on the adapter are powered whenever the
unit is attached to power.
10.
11.
Drive your vehicle(s) into the garage to the location(s) you will typically park each
time.
Activate the garage door opener, and the Laser Guided Parking System will emit
a bright, laser light beam. Adjust the Swivel Mount(s) so that the beams point to a
location on the dash or hood of the vehicle that you can easily see while driving.
NOTE: The Laser Guided Parking System will automatically shut off after about 3
minutes. If necessary, reactivate the garage door opener until you have finished
adjusting the laser light beams.
12.
13.
Sit in the driver’s seat to make sure you can easily see the laser light beam on the
dash or hood of the vehicle(s). If necessary, readjust the laser light beams.
This is now your point of reference for parking in the same location every time.
NOTE: If attaching the Swivel Mounts (1) to the ceiling of the garage, you may
need to install the Swivel Mounts farther forward to ensure the laser light beam
can be seen on the driver’s side dashboard when the vehicle is parked. To install
the Swivel Mounts on the ceiling, use the two Ceiling Mounting Screws (3) pro-
vided.
SKU 94318
For technical questions, please call 1-800-444-3353
PAGE 6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
1.
2.
3.
4.
Open the garage door using the automatic garage door opener and drive in
slowly.
The laser light beam will move toward you across the vehicle’s hood as you drive
into the garage.
Stop and park when the laser light beam reaches the location on the vehicle you
previously selected (hood, dashboard, etc.).
The Laser Guided Parking System is automatically activated by your garage door
opener. The laser beam(s) will automatically deactivate when the garage door
opener light turns off (typically after about 3 minutes).
TROUBLESHOOTING
Problem
Garage door opener operates, but
Laser Guided Parking System does
not automatically activate.
Possible Solution
1. Make sure the Pull Chain on the AC
Adapter with Pull Chain is pulled to
its “ON” position.
2. Make sure the AC Adapter with Pull Chain
is firmly screwed into the garage door
opener light socket.
3. Make sure the Power Pack is firmly
connected to the AC Adapter with Pull
Chain.
4. Make sure the Cable of the Laser Guided
Parking System is properly connected to
the Swivel Mount and Power Pack.
When parking a vehicle, other than
the vehicle typically parked, the laser light
beam does not illuminate the previously
selected location (hood, dashboard, etc.) on
the vehicle.
1. The Swivel Mount must be re-adjusted,
depending on the specific type (make and
model) of the new vehicle being parked.
INSPECTION, MAINTENANCE, AND CLEANING
1.
2.
WARNING! Make sure the Laser Guided Parking System is unplugged
from its electrical outlet prior to performing any inspection, maintenance, or
cleaning of the machine.
Daily, inspect the general condition of the Laser Parking System. Check for
loose screws, misalignment or binding of moving parts, cracked or broken parts,
damaged electrical wiring, and any other condition that may affect the safe op-
eration of this product. If abnormal noise occurs, have the problem corrected
SKU 94318
For technical questions, please call 1-800-444-3353
PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
by a qualified service technician before further use.
Do not use damaged equipment.
5.
6.
To clean, use a clean cloth with a mild detergent. Do not immerse in liquid.
CAUTION! All maintenance, service, or repairs not mentioned in this
manual must only be performed by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDEDTHE PARTS LIST AND ASSEMBLY
DIAGRAM INTHIS MANUAL AS A REFERENCETOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION ORWARRANTY OF ANY KINDTOTHE BUYERTHAT
HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFAC-
TURER AND/OR DISTRIBUTOR EXPRESSLY STATESTHAT ALL REPAIRS AND PARTS REPLACE-
MENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BYTHE
BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTSTHERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT PARTS THERETO.
PARTS LIST AND ASSEMBLY DIAGRAM
Part #
1
2
3
Description
Swivel Mount
Cable (10 Ft.)
Qty. Part #
Description
Power Pack
AC Adapter w/Pull Chain
Qty.
1
1
2
2
2
4
5
Ceiling Mounting Screw
2
1
1
3
5
2
4
NOTE:
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
SKU 94318
For technical questions, please call 1-800-444-3353
PAGE 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|