LED LCD TV
OWNER' S MANUAL
MODEL: LE32V600
LE46V600
LE50V600
Please READ this manual carefully
before operating your TV, and retain
it for future reference
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
1) Read these instructions.
2) Keep these instructions.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
3) Heed all warnings.
CAUTION
4) Follow all instructions.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in
accordance with the instructions.
8) Do not install near any heat sources such as radiations,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
The symbol indicates that dangerous voltages
constituting a risk of electric shock are present
within this unit.
9) Do not defeat the safety purpose of the polarized plug. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
The symbol indicates that there are important
operating and maintenance instructions in the
literaturaccompanying this unit.
WARNING:
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
12) Unplug this apparatus during lighting storms or when
unused for long periods of time.
WARNING:
The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
13) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
14) Mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
15) The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
table-cloth, curtains, etc.
This symbol indicates that this product incorporates
double insulation between hazardous mains voltage and
user accessible parts. When servicing use only identical
replacement parts.
16) No naked flame sources, such as lighted candles, should
be placed on the apparatus.
17) Attention should be drawn to the environmental aspects
of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection
systems or contact the retailer where the product was
purchased. They can take this product for environmental safe
recycling.
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY AND WARNINGS
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose the
television receiver to rain or moisture.
Do not place your television on an unstable cart, stand, shelf
or table. Serious injury to an individual , and damage to the
television, may result if it falls.
Do not drop or push objects into the television cabinet slots
or openings. Never spill any kind of liquid on the television
receiver.
When the television receiver is not used for an extended
period of time, it is advisable to disconnect the AC power
cord from the AC outlet.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Avoid exposing the television receiver to direct sunlight and
other sources of heat. Do not stand the television receiver
directly on other products which give off heat, e.g. video
cassette players and audio amplifiers. Do not place naked
flame sources, such as lighted candles on the television.
D
i
m
:
5
1
5
*
3
2
0
m
m
(不
包
括
底
座
）
Do not trap the power supply cord under the television
receiver.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Main features
Used as Television, display terminal, PC display;
1
2
3
4
5
High luminance, wide viewing angle;
Can store 200 TV programs;
HDMI interface;
Multi-Media player (USB);
Accessories
LED LCD TV.................................1
Bottom Stand..................................1
Screw..............................................1
Remote Control..............................1
Battery(AAA).................................2
Power Cord......................................1
User Manual....................................1
Warranty Card.................................1
Quick Set Up Guide........................1
E-waste Guideline Booklet.............1
Main parameter
Model Name
LE32V600
LE46V600
LE50V600
Resolution
1360 x 768
16:9
1920 x 1080
16:9
1920 x 1080
16:9
Aspect Ratio
PAL B/G
PAL B/G
PAL B/G
TV System
Video Signal System
Receiving Channel
Input Power Voltage
Power consumption
PAL/SECAM/NTSC
1-200
PAL/SECAM/NTSC
1-200
PAL/SECAM/NTSC
1-200
AC 100-240V 50/60Hz
60W
AC 100-240V 50/60Hz
100W
AC 100-240V 50/60Hz
110W
Audio Output Power(THD≤7%) 2 x 8W
Analog RGB(VGA) x 1
2 x 10W
2 x 10W
Analog RGB(VGA) x 1
Analog RGB(VGA) x 1
High-Definition Multimedia High-Definition Multimedia High-Definition Multimedia
Interface (HDMI) x 2
Interface (HDMI) x 2
Interface (HDMI) x 2
Composite Video Input x 1
Composite Video Input x 1
Composite Video Input x 1
Signal Input
Composite Video Output x 1 Composite Video Output x 1 Composite Video Output x 1
Audio Input x 1
YCb (Pb )Cr (Pb) x 1
USB x 1
Audio Input x 1
YCb (Pb )Cr (Pb) x 1
USB x 1
Audio Input x 1
YCb (Pb )Cr (Pb) x 1
USB x 1
RF x 1
RF x 1
RF x 1
Composite Video input >=350 Composite Video input >=350 Composite Video input >=350
Horizontal definition (TV line)
Y Cb(Pb ) Cr(Pr)
>=400 Y Cb(Pb ) Cr(Pr)
>=400 Y Cb(Pb ) Cr(Pr)
>=400
Ambient Temperature
0 to 45 degree Celsius
0 to 45 degree Celsius
0 to 45 degree Celsius
VESA mount pattern: 100 x
100mm
VESA mount pattern: 200 x
200mm
VESA mount pattern: 200 x
200mm
Screw: M6
Length: 22mm
Screw: M6
Length: 15mm
Screw: M6
Length: 15mm
Wall mount
This product does not include wall-mount braket module.
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Front panel
KEYBOARD
VOL+
VOL-
1
2
3
CH
CH
2
1
3
4
INPUT
MENU
3
0
3
0
5
1. VOL+/ VOL- :
Adjust sound level.
In Menu mode, press " VOL+" or "VOL-" to adjust the
item that you selected.
1: Remote control sensor.
2: Indicator LED: LED OFF POWER ON.
RED STANDBY.
2. CH / CH
:
In TV mode, press "CH+" or "CH-" to change the channel
up and down.
In MENU mode, press "CH+" or "CH-" to select items.
In standby mode, press "CH+" or “CH- " to turn on the
TV.
3: Key board
3. INPUT :
Display the input source menu.
4. MENU :
Display main MENU.
5.
:
Press this button to turn the unit ON from STANDBY
mode.
Press it again to turn the set back to STANDBY.
REAR AV Connections(SIDE)
All the terminals are (from up to down):
USB, ANT/CABLE, EARPHONE, HDMI 2.
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
REAR AV Connections
All the terminals are (from left to right):
HDMI 1, VGA, Y/VIDEO, Pb, Pr, L, R, VIDEO OUT, AUDIO.
Note: VIDEO and YPbPr share one audio channel.
ANTENNA
Plug
An outdoor antenna
TWIN-LEAD FEEDER(300Ω)
An outdoor antenna
CATV net
ANT 75Ω
Adaptor (NOT SUPPLIED)
Loosen the screws Insert the feeder in Wires Tighten the screws
Note:
Aerial connections: IEC (female).
Input impendance: 75Ω unbalanced.
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
PC
STEPS:
Be sure both the TV and computer are Power off.
1. Connect VGA and audio cable.
2. Connect power cord.
3. Power on the TV switch to PC mode.
4. Power on the PC.
This sequence is very important.
8
Note: Appearance in the book is a schematic diagram, please buy the real.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
PC Input Signal Reference Table
Connect a computer to your TV set and set up the computer output signal in accordance with table below.
Default computer mode
Item
Resolution
640 × 480
720 × 400
800 × 600
1024 × 768
Horizontal Frequency (kHz)
Vertical Frequency(Hz)
1
2
3
4
31.469
31.469
37.879
48.363
59.94
70.087
60.317
60.004
1360 × 768
(*LE32V600)
5
6
7
8
47.72
55.469
65.29
59.799
59.901
59.954
59.934
1440 × 900
(only for LE46V600/LE50V600)
1680 × 1050
(only for LE46V600/LE50V600)
1920 × 1080*
(only for LE46V600/LE50V600)
66.587
*Recommended resolution
DVI/ PC HDMI Input Signal Reference Table
When DVI port is being used: connect the DVI port of video device to your TV set with a DVI-to-HDMI line and set up the
output signal of the video device in accordance with table below.
When HDMI port is being used: connect the HDMI ports of your computer and TV set with one HDMI wire and set up the
output signal of the video device in accordance with table below.
Default HDMI Mode
Standard
Resolution
640 × 480
800 × 600
1024 × 768
Horizontal Frequency (kHz)
Vertical Frequency(Hz)
1
2
3
31.469
37.879
48.363
59.94
60.317
60.004
1360 × 768
(*LE32V600)
4
5
47.72
59.799
59.934
1920 × 1080*
(only for LE46V600/LE50V600)
66.587
*Recommended resolution
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Video Input Signal Reference Table
Connect the component signal or HDMI port of video device to your TV set and set up the output signal of the video device in
accordance with table below.
If your computer display card supports signals of video format then you can set up following output signal.
Default Component or HDMI Mode
Standard
SD
Resolution
640 × 480p
720 × 480i
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
25.175
15.734
31.5
60
60
60
50
50
50
60
50
60
50
60
SD
SD
720 × 480p
720 × 576i
SD
15.625
31.25
37.5
SD
720 × 576p
1280 × 720p
1280 × 720p
1920 × 1080i
1920 × 1080i
1920 × 1080p
1920 × 1080p
HD
HD
45
HD
28.125
33.75
56.25
67.5
HD
FHD
FHD
Video Input Signal Reference Table
Video System Supported in TV and Video Modes
PAL B/G
Standard Definition Interface
You can also enjoy traditional program by using a DVD player or VCR Player. Connect this equipment to your TV via the
Composite Input on the back of your TV.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
AV EQUIPMENT
This TV provides two group of AV, one group of YPbPr for convenient connection to VCR, DVD or other video equipment.
Please refer to the owner's manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
VIDEO EQUIPMENT
Y
W
R
TO AUDIO OUTPUTS
TO VIDEO OUTPUTS
G
B
R
W
R
HDMI
VIDEO EQUIPMENT
G
B
R
W
R
TO VIDEO OUTPUTS
VIDEO EQUIPMENT with YPbPr
Y
R
Yellow (video)
Red (audio R)
White (audio L)
Red (Pr or Cr)
Blue (Pb or Cb)
Green (Y)
W
R
B
G
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc...
YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i.
Note:
1. AV and YPbPr share one audio channel.
2. When HDMI port get DVI signal, the "PC Audio" channel is changed to receive the audio for HDMI port.
3. Sometimes it will not support in different device because the device supplys nonstandard signal.
4. When current source is TV, VIDEO OUT signal is TV; when current source is AV, VIDEO OUT signal is AV; othersources
have no VIDEO OUT signal.
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROLLER
The remote control cannot be operated unless the batteries are properly loaded inserted.
When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
5. S.MODE
Sound mode switch.
6. FREEZE
Static picture.
7. ARC
No function.
8. H.LOCK
No function.
9. FAVORITE
No function.
10. SLEEP
1
2
4
6
3
5
7
8
9
11
10
12
Sleep.
11. I/II
Stereo Sound Switch.
12. 0-9 NUMBER
13
15
14
16
Press to enter TV channel number to select channel or
digital number.
13. SOURCE
Press to select source.
14. DISPLAY
Display information of current signal.
15. MUTE
Switch on or off the sound.
16. RECALL
18
17
19
20
21
22
Press to display the previous channel or source or back.
17. VOL
Press to adjust the volume.
18. CH
Press to browse through the TV channels.
19. MENU
24
26
28
23
25
27
29
a. Press to activate OSD menu and back to previous level
of OSD.
30
b. Exit OSD.
20. EXIT
Press to exit OSD.
21. OK
Press to activate the setting/selection of OSD.
22.
a. Press to navigate the OSD menu;
b. The cursor RITHT key perform confirmation as well as
precede next level of OSD in Main menu;
23. USB
1.
Press to turn on/off the TV. The TV is never completely
powered off unless it is physically unplugged.
Switch to USB.
2. SCAN
No function
3. HDMI
Key to HDMI.
24. BACK
Press to display the previous channel or source or back.
25. TIMESHIFT
No function.
4. P.MODE
26. PLAY/PAUSE
Picture mode switch.
Pause/Play photo/music/video/text file in USB.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
27. REC
No function.
28. HELP
No function.
29. REV/ FWD/ PREV/ NEXT
REV
NEXT
:
1 .Press to go to the next music/photo/video/text in USB
2. Delete,delete chanels in Channel Edit menu.
3. Blue key in Teletext mode
30. TEXT/ MIX/ SUBCODE/ HOLD/ PIP/SWAP/ MOVE/
ZOOM
:
1. Fast Backward USB Video/ Music/Text
2. Swap, swap chanels in Channel Edit menu.
3. Red key in Teletext mode
TEXT:
Press to turn on/off TTX.
MIX:
Mixed mode in Teletext.
SUBCODE:
Subtitle in Teletext.
HOLD:Freeze the picture in Teletext.
PIP/SWAP/ MOVE:
Not function.
FWD
:
1.Fast Forward USB Video/ Music/Text
2. Press to go to previous page when scan file in USB
3. Insert,insert chanels in Channel Edit menu.
4. Green key in Teletext mode
PREV
:
1. Press to go to the previous music/photo/video/text in
ZOOM:
USB
Zoom the picture in Teletext.
2. Press to go to next page when scan file in USB
3. Yellow key in Teletext mode
Picture Setup
Smart Picture
Brightness
Contrast
Personal
50
50
50
50
Video
Color
Audio
Sharpness
Color Temp.
Advanced Control
TV
Cool
Setting
Parental
MENU
OK
Exit
Select
Enter
Items
Description
Personal
Vivid
User can set their favorite setting.
For Enhances picture contrast and sharpness.
Smart Picture
Standard
ECO
For standard picture settings. Recommended for home entertainment.
Decrease backlight level to save the power
Movie
For viewing film-based content. Most suitable for viewing in a theater-like environment.
Brightness
Contrast
Color
To brighten the dark parts of the picture.
To sharpen the picture quality.
To add or reduce Color.
Sharpness
To improve details.Not available in PC mode.
Normal
Cool
Natural whitish color
Bluish white color
Reddish white color
Color Temp.
Warm
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
Noise
Reduction
To filter out and reduces the image noise and improve picture quality.
Backlight
Control the brightness of the backlight.
Advanced control
Dynamic contrast ratio: Setup the contrast of the TV set to vary in accordance with the
brightness and darkness of the TV set when it is set to on.
DCR
Dynamic Color Control: Using DCC image on the LCD display become more vivid and
superior color saturation. (Not supported in PC source mode).
DCC
Note:Certain screen setups may be unavailable or have different options in accordance with the input sources.
Audio Setup
Personal
Smart Sound
Video
0
Balance
50
Bass
50
Treble
Audio
TV
Virtual surround
AVL
Off
On
Setting
Parental
MENU
OK
Exit
Select
Enter
Items
Description
Standard
Music
Suitable for spoken dialog.
Ehance treble and bass
Smart Sound
Speech
Ehance treble and keep the bass at medium level
Adjust sound mode as per personal requirement.
Personal
Sound Mode can also be accessed by pressing the S.MODE button on the remote control.
Adjust the balance between left and right speakers to adapt to your listening position.
Adjust the bass effect.(Increases or decreases lower-pitched sounds)
Balance
Bass
Treble
Adjust the treble effect.(Increases or decreases high-pitched sounds)
Virtual surround
TV provides surround sound effect with rich bass and clear dialog when DSS effect is On.
AVL
Automatically reduces sudden volume changes,for example,when switching between the channels.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
Features Setup
Menu Language
Video
English
TTX Language
West
Audio
Picture Format
16:9
Menu Timeout
TV
Off
Menu Transparency
Power On Status
Freeze
Off
Keep Last Memory
Off
Off
Setting
Blue Screen
Time Setup
Parental
System Reset
MENU
OK
Exit
Select
Enter
Items
Description
Select an OSD menu language can be displayed. Default English is selected as menu
language.
Menu Language
Select a Teletext language in TTX mode.
West: Western Europe
TTX Language
East: Eastern Europe
Russian: Russian
Arabic: Arabic
Resize the aspect ratio of the picture for optimum viewing. Available formats : 16:9, 4:3,
Zoom1 and Zoom2.
Picture Format
Menu Timeout
Set up the period of time that the OSD menu screen is to be displayed.
Select an OSD menu transparency as Off, Low, Middle, High, by default OSD transparency
is set to Low.
Menu Transparency
Select desired TV turn on condition, when AC power switch is turned on.
Standby: TV will be in stand by condition and can be turned on by press Power key on remote
control.
Power On Status
Power On: TV will turn on as soon as AC power switch is turned on.
Keep Last Memory: TV will turn on as per the last power on settings.
Freeze
When the Freeze Switch is On, picture is frozen while changing the channel.
To select the transition type required while changing from one channel to another.
Select Off : No blue screen function
Blue Screen
Select On : Blue screen will appear while changing the channel.
To Support Auto, PAL, PAL_60, NTSC, NTSC4.43, SECAM. (This feature is only available
in AV mode.)
Color System
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
Date : Enter TV date in year, month and date format YYYY/MM/DD. Default date is
2000/01/01.
Time : Enter desire TV time in hour, minute and second format HH:MM:SS. Default time
start from 00:00:00.
Power On Timer : Turn on TV from standby mode with pre-defined channel/source at
specified time automatically.
On : TV will turn on daily at specified time with specified channel / source.
Once : TV will turn on only once at specified time and channel/source and resets to Off.
Timer: Set turn on/off time
Power On Setting: Select channel/source when turn on TV
Power Off Timer : Turn off the TV at the specified time.
On : TV will turn off daily at specified time.
Time
Time
Setup
Once : TV will turn off only once and resets to Off.
Note: Date and time will be reseted to default if AC power is turned off.
Power On Timer will work only when TV is in standby mode.
Set a time period after which the TV will be turned off and enter stand by mode.
Sleep timer can be set to Off,10,20,30,40,50,60,90 & 120 minutes.
Sleep Timer
Auto Sleep
Auto Sleep can be set to Off, 1 Hour, 2 Hours or 5 Hours
You can restore the factory default picture and sound settings of your TV.
The channel installation settings and Child lock remains the same.
System Reset
Parental Setup
Video
Channel Lock
Input Block
Audio
Keypad Locked
Off
Change Password
TV
Clean All
Setting
Parental
MENU
OK
Back
Select
Enter
Press the original password of 0000 to enter parental menu.
Items
Description
Channel Lock
Input Block
Keypad Locked
Change Password
Clean All
Lock or unlock the selected chanels.
Lock or unlock the selected input source.
Lock or unlock the key pad.
Change parental password.
Clear the lock status of channels, source, key pad.
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
Channel Setup
This setup is available in TV mode only.
Auto Search
Video
Update Scan
Audio
Manual search
Channel Edit
Clean Channel List
TV
Setting
Parental
MENU
OK
Exit
Select
Enter
Items
Description
TV automatically searches for the channel in the available frequency band and stores
sequentially.
Select
menu.
TV
Auto Search
Select Auto search and press
During auto searching Press
key or ► arrow key to tune channels automatically and store.
OK
key to stop search.
Menu
Updates your channel list by adding new/missed channels to the end of the list without disturbing
previously stored channels.Consequently, it takes more time than Auto channel scan.
Search for the channels manually and store it to the desired channel number.
It can also be used for editing of channels searched by auto search if required.
Please refer to Manual Search description in next page for details.
Update Scan
Manual Search
Channel Edit
Edit the selected channel, including channel swap, insert, delete, skip, channel name.
Clear the channel list.
Clean Channel List
Note: Make sure you have connected RF signal cable before performing channel search.
Manual search description
1. Select TV menu and select Channels.
2. Select Manual Search and press OK key or ►arrow key to get Manual search sub-menu.
3. Select Start Frequency to input frequency you want to start
4. Select End Frequency to input frequency you want to end
5. Select Start Search and OK key or ►key to search
Video
Search for Analoge Channels
Audio
0
%
TV
49.75
Start Frequency (MHz)
Setting
865.25
End Frequency (MHz)
Start Search
Parental
MENU
OK
Back
Select
Enter
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
Computer Setup
This setup function is available in computer mode.
Auto Adjust
50
50
50
50
H.Position
V.Position
Phase
Video
Audio
Clock
TV
Setting
Parental
MENU
OK
Exit
Select
Enter
Items
Decsription
Auto Adjust
H.position
V.position
Phase
Press arrow Button to adjust the screen automatically to the optimal position of the picture.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture.
Eliminate the horizontal interfering lines.
Clock
Eliminate the vertical interfering lines.
Note:
If the PC is connected to the TV and no signal has been input from the PC for more than 30 seconds,the TV enters the standby
mode automatically.
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
USB Media Center
Photo
Select
Music
Video
Text
Enter
OK
TV USB port can be used to view JPEG photos, play mp3 music and Video files,and read text present in USB devices.
Entering to USB Media
Press USB key on remote to get USB Media menu as shown above
Or Press the Source key and
keys on remote and select USB source to get USB Media menu as shown above.
Select the Media type (Photo/ Music/ Movie/ Text) to be viewed and press OK key to enter into USB Media
and When USB drive is detected by the TV, USB drive is displayed as a folder on the screen as shown below.
Press OK key to view subfolder or files in the USB drive.
Note: * Files of selected Media type can only be viewed through USB. Media type can be any one amoung Photo / Music /
Movie / Text.
After entering the multimedia file selection interface, press the Menu button allows you to execute the following control
functions:
1. [Sort]: Sort the multimedia files according to Date or Name.
2. [Media Type]: Select the multimedia file type to playback.
3. [Thumbnail Size]: Select the size of the multimedia file thumbnail.
4. [Copy]: Select the multimedia files to copy.
5. [Paste]: Paste the copied multimedia file.
6. [Delete]: Delete the selected multimedia file.
Viewing Photos
1
/
2
Photo
C:\
Photo
Photo
Music
JPG
Video
Return
Select
Enter
Back
OK
Back
1. Thumbnail of the available images will be displayed on the screen. If no images are displayed then select the folder
containing the Photos .
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
2. Select particular image and press OK key to display it in full screen.
Slide show starts automatically when image is viewed in full screen.
3. Press
key to play/ pause slideshow. Press
,
to view previous or next image.
USB menu settings for Photo Slide show
None
Pause
Disintegrate
Repeat
Wipe from right
Wipe from left
Wipe from up
Wipe from down
Random
Duration
Effect
Information
Press Menu key to get following Menu setup shown above.
1. [Play/Pause]: Play/Pause photo play.
2. [Repeat]: Select the repeat mode as None, Repeat One, Repeat All.
3. [Random]: Select Shuffle mode as Shuffle Off, Shuffle On.
4. [Duration]: Select play time as Short, Medium,Long.
5. [Effect]: Select effect of transition
6. [Information]: Display the information of the file.
Playing Music files
1. Thumbnail of the available music files will be displayed on the screen. If no files are displayed then select the folder
containing the music files.
2. To play particular music file select the required file and press OK key.
3. Press
key to play/pause music. Press
,
to play previous or next track.
USB menu settings for Music play
Music
None
00:00:42
00:03:58
1
/
1
Music
My Love.mp3
MENU
Enter
MENU
OK
Press Menu key to get following Menu setup shown above.
1. [Play/Pause]: Play/Pause music play.
2. [Repeat]: Select the repeat mode as None, Repeat One, Repeat All.
3. [Random]: Select Shuffle mode as Shuffle Off, Shuffle On.
4. [Infomation]: Display the information of the file.
5. [Show Spectrum/Hide Spectrum]: Select show or hide Spectrum.
6. [Smart Sound]: Select the sound mode as Standard,Personal, Music, Speech.
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
7. [Lyric Option]: Select on or off to turn on or off lyric display.
8. [Audio Only]: Select it to turn off dispaly and to get only sound from TV.
Playing Video files
1. Thumbnail of the available video files will be displayed on the screen. If no files are displayed then select the folder
containing the video files.
2. To play particular video file select the required file and press OK key.
3. Press
key to play/pause video. Press
,
to play previous or next video.
USB menu settings for Video play
00:00:42
None
00:03:58
1
/
1
1x
1 / 1
Video
My Video.VOB
MENU
Enter
MENU
OK
Press Menu key to get following Menu setup shown above.
1. [Play/Pause]: Play/Pause movie play.
2. [Repeat]: Select the repeat mode as None, Repeat One, Repeat All.
3. [Information]: Display the information of the file.
4. [Smart Picture]: Select the picture mode as Vivid, Standard, Movie, Personal,Eco.
5. [Screen Mode]: Select the screen mode as 4:3, Zoom1, Zoom2, 16:9.
6. [Subtitle Display]: Select the subtitle mode of the movie.
7. [Track]: Select the track mode of the audio.
Reading Text files
1. Thumbnail of the available text files will be displayed on the screen. If no files are displayed, then select the folder
containing the text files.
2. To read particular text file select the required file and press OK key.
3. Press
keys to browse the text.
USB menu settings for text read
Beijing int'l airport's passenger volume up 4.2 pct
BEIJING, Jan.
5
(Xinhua) -- Beijing Capital International Airport said Saturday that it remained
the world's second-busiest airport in 2012 in terms of passengerthroughput.
Passenger volumes grew 4.2 percent year on year to reach 81.8 million people last year,
according to
a
statement from the airport.
The number of daily passengers exceeded 278,000 during peak travel periods in
2012, the statement said.
The airport has become increasingly busy in the last decade due to China's robust economic
growth. Ninety-four airlines were using it as
a
flight hub as of the end of last year, operating
flights to 236 destinations, according to the statement.
1
/
1
1
None
Text
ENGLISH.txt
FF
FB
Prev.
Next
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
Press Menu key to get following Menu setup shown below.
1. [Play/Pause]: Play/Pause text read.
2. [Repeat]: Select the repeat mode as None, Repeat One, Repeat All.
3. [Random]: Select the shuffle mode as Shuffle Off, Shuffle On.
4. [Infomation]: Display the information of the file.
.
Formats supported to multimedia mode: Photo, Music, Movie and Text.
Format
Resolution
Type
Note
JPEG
Base-line:15360 x 8640
Progressive:1024 x 768
9600 x 6400
Base-line
Progressive
Picture
bmp
png
9600 x 6400
Format
MP3
Sample Rate
Date Rate
Channel
Audio
Movie
32KHz-48KHz
32Kbps-320Kbps
Mono/Stereo
Format
File Extension
.RM/.RMVB
.DAT/.MPG
.AVI /.MP4
Codec
Data Rate
20Mbit/sec
20Mbit/sec
20Mbit/sec
Real media
MPEG1/2
MPEG4
RealVideo 8/9
MPEG-1/2 Video
H.264
Format
txt
Note
Text
Remarks:
1. USB interface of digital multimedia player is not all-purpose. So when some USB devices could not be recognized, the
problem is usually not the performance failure but due to device driver.
2. Because USB devices and memory capability are different, the time needs for multimedia player to read information are
also different. So the information reading speed of the player temporarily getting slow are not the performance failure.
3. The voltage supplied to USB interface is 5V, and the most electrical current is 500mA. When some interface criteria of
USB devices are different from standard USB protocol, digital multimedia player may be unable to recognize USB devices
correctly, which is normal status.
4. USB could be used as an interface to update software.
5. If some files source could not play because of the parameter decoding-limitation, the problem is not performance failure.
6. The system only applies to memory medium with FAT32 and NTFS format.
7. Does not support connecting of removable devices to the USB hub.
8. Does not support displaying of subtitles of video files with subtitles.
9. Does not support thumbnail display of png and Bmp format images.
10. The USB device does not support copying and pasting for NTFS system.
-21-
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Inspection
Trouble phenomenon
Picture
Audio
Snow
Noise
antenna position, direction or connection
antenna position, direction or connection
Ghost
Normal audio
Noise
electronic equipment,car/
motorcycle,fluorescent light
Interfere
Normal Picture
No picture
No color
Scramble
No color
Volume(inspect wether the mute function
on the remote control are started , or
audio system are correct or not)
Mute
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume setup
Press standby key on the remote control
for inspecting
Mute
Normal audio
color control
Normal audio or weak retune channel
Noise
Audio system
-22-
Download from Www.Somanuals.com. All Manuals Search And Download.
X41G32MV67220A
Download from Www.Somanuals.com. All Manuals Search And Download.
|