LE42H5000
LE47H5000
LE55H5000
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warnings
Safety Warnings
Welcome
Thanks for buying this 47"/55" LED Backlit Flat TV. This guide will help you to set up and begin using your TV.
Firstly, check the contents of your box with the parts checklist below:
• 42"/ 47"/ 55"LED Backlit Flat TV
• Remote control
En
• AAA battery ×2
• Instruction Manual
• TV Stand
• 8Xscrews for 42"model ; 8x screws for 47" model(Plastic Tray×2,only for 47");
• AV adaptor
• 3D glasses ×6
Now you can get started!
Important Information
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical
must be followed if it is to be replaced.
WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy
moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.
The ventilation should not be impeded by covering the ventilation openings with items, such
as newspaper, table-cloths, curtains, etc.
CAUTION: ▲ The main plug is used as disconnect device which shall remain readily operable.
▲ Please read this manual carefully before using your television and keep this manual in a
good place for future reference.
▲ To achieve the best performance of your television, read this User‘s Manual carefully and
properly store it for future reference.
▲ Information of screen displays and figures in the User’s Manual may vary due to technical
innovations.
▲ Unauthorized disassembly of this product is prohibited.
WARNING To prevent the spread of fire,keep candles or other open flames away from this product at all
times.
LED Backlit Flat TV Instruction Manual EN-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructionss
Important Safety Instructions
EN-3 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructionss
En
LED Backlit Flat TV Instruction Manual EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
About Your LED LCD TV
Installing the Stand
Step 1 : Connect the guide stand to the stand using
4 screws(M 4X8) as shown.
Step 2 : Remove 4 EA screws on back of TV as shown
in picture.
Step 3: Put the stand base on the slot of display
bottom; Finally ꢀx 4 screws(M 4X12) in accessory to
the right position as shown in picture.
Step 4: Stand assembly is ꢀnished.
⬉㾚ᴎ㚠䴶
screws
hole
ꢀ
ꢃ
ꢁ
ꢂ
EN-5 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About your LED LCD TV
Wall Mounting Installation
Preparing before installing Wall-Mount.
To install a wall-mount from another manufactuer,use the Holder-Ring.
En
42" model standard screw : M6
47" model standard screw : M6
55" model standard screw : M6
Installing Wall-Mount kit
The wall mount kit (Sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount see the instructions provided with the wall mount.
Contact a techinical assistance when installing the wall mont bracket.Haier Electronics is not responsible
for any damage to the product or injury to yourself or others if you elect to install the TV on yor own.
LED Backlit Flat TV Instruction Manual EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Control Panel
Front Control Panel
SOURCE
MENU
VOL+
VOL-
CH+
CH-
POWER
Press this key to open/close signal source
CH+/-
POWER
TV channel up and down.
Press to turn the TV on and off.
4
5
SOURCE
1
options menu.
Menu display. Press to access the on-screen
menu display.
Press to increase and decrease the volume.
MENU
2
3
VOL+/-
EN-7 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel Connections
Back panel connections
En
AV OUT
output
output
input
8
9
0
LAN
ANT IN
PC Video IN
input
input
input
1
2
3
DIGITAL AUDIO OUT (OPTICAL)
HDMI 1 IN/HDMI 2 IN
PC Audio IN
input
4
COMPONENT IN
AV IN
USB
input
input
input
5
6
7
LED Backlit Flat TV Instruction Manual EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Get to Know Your Remote Control
When using the remote control, aim it towards the remote sensor on the TV.
Turn the TV on and off.
Quick button switch to TV source.
sleep button.
Press to directly access to channels.
Display the channel list on the screen.
Adjust the Volume.
Quick button for 3D functions.
Quick button for Sound Mode function.
Displays the main on- screen menu.
No available.
1
2
3
4
5
6
7
8
9
0
A
Turn previous.
Selects the on-screen menu items and changes the values on the
menu.
B
Turn next.
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
Function button (just reference the OSD).
Play/Pause button (only for USB).
Fast Reverse (only for USB).
Enter setting interface.
Hotel Lock.
Press to jump back and forth between two channels.
Cut off the sound temporarily.
Change Channels.
Quick button for Cloud functions.
Select the Picture Mode.
APPS@TV(TV-APPS homepage).
Returns to the previous menu.
OK button.
Exit the menu.
No available.
Fast Forword (only for USB).
EN-9 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
External Equipment Connections
Power source
Connecting to an
Antenna or Cable
En
To use AC Power Supply
Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard polarized AC
outlet.
Connection
Over-the-air TV reception quality will depend on your
antenna type, antenna location and antenna positioning.
Note
▲ Never connect the AC line cord plug to other than
the specified voltage. Use the attached power cord
only.
▲ If the polarized AC cord does not fit into a non-
polarized AC outlet, do not attempt to file or cut
the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
▲ If you cause a static discharge when touching the
unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The
unit should return to normal operation.
VHF/UHF Antenn
or
Cable Television
Network
Note
▲ To improve the picture quality in a poor signal
area, please purchase a signal amplifier and install
properly.
▲ If the antenna needs to be split for two TV’s, install
a “2-Way Signal Splitter”.
▲ When you move or swivel the TV with Antenna
cable tightly connected, there is high risk antenna
jack on TV will be broken off.
LED Backlit Flat TV Instruction Manual EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Choose Your Connection
There are several ways to connect your television, depending on the components you want to connect and the quality
of the signal you want to achieve. The following are examples of some different ways to connect your TV with different
input sources.
Connecting to HDMI Device
Using an HDMI or HDMI/DVI Cable: HD connection(up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD player, Blu-ray player, HD cable box, HD satellite receiver(STB).
BD/DVD player/
HD cable/Sat.box
HDMI OUT
DVI OUT
HDMI IN PC AUDIO IN
A
B
C
When using an HDMI/DVI cable connection, you must use the HDMI IN jack for video. A DVD player, Blu-ray
player,HD cable box,HD satellite receiver(STB), cable box,or STB satellite receiver may require a DVI-HDMI(DVI to
HDMI)cable or DVI-HDMI(DVI to HDMI)adapter.You must use the PC/DVI AUDIO IN jack for audio.
The picture may not display normally(if at all)or the audio may not work if you connect an external device that uses
an older version of HDMI mode to the TV. If such a problem occurs, ask the manufacturer of the external device
about the HDMI version and, if out of date,request an upgrade.
Be sure to purchase a certified HDMI cable, Otherwise, the picture may not display or a connection error may occur.
EN-11 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connecting to an AV Device
Using a Component(up to 1080p) or an Audio/Video Cable
Available devices: DVD player,Blu-ray player,cable box,STB satellite receiver,VCR
En
Note
▲ For better picture quality, the Component connection is recommended over the A/V connection.
AV OUT: Connects to the audio input jacks on your amplifier/home theater
A
B
When connecting, use the appropriate connector (included with your TV).
When you connecte an audio amplifier to the AV OUT jacks: Decrease the volume of the TV and adjust the volume
level with the Amplifier’s volume control.
LED Backlit Flat TV Instruction Manual EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connecting to an Audio Device
Using an Optical(Digital) or Audio(Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater.
When you connect a Digital Audio Syetem to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of both TV
and the system.
Connecting to a PC
Using an HDMI cable or HDMI to DVI Cable / a D-Sub Cable
HDMI OUT
DVI OUT
EN-13 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
Note
▲ Your PC may not support an HDMI connection.
Basic Receiving and
Playing Operations
En
Tuning Your TV
Switching ON/OFF the
TV set
Display Tuning menu by pressing SOURCE button then
use 6 button to select the source of TV .
In the manual, the OSD (on screen display) may be
different from your TV’s because it is just an example to
help you with the TV operation.
A
B
Press MENU button and then use 34button to
select Tuning menu. press OK to enter.
Press 6button to select the desired items, press
OK to enter its submenu.
Switching ON/OFF the TV set
A
First, connect power cord correctly and the power
indicator will light.
B
C
Press POWER on the remote control.
If you want to exchange to standing by status,please
press down POWER on the remote control
D
Disconnect the power supply or unplug the
television if it is intended to completely cease the
television performance.
Color System
A
B
C
Press MENU button , Press 34button to select
Tuning, press OK to enter its submenu.
Choose the Input source
Press 6button to select Color System,
Press34button to select PAL/NTSC/SECAM/AUTO.
Use to select TV or an external input source such as
a DVD player/Blu-ray player/cable box/STB satellite
receiver.
Press RETURN button to return to the previous
menu, press EXIT button to exit the menu screen.
A
B
Press SOURCE button to enter the Input Source
menu and then use 6button to select the desired
external input source (TV, AV, YPBPR, PC, HDMI1,
HDMI2).
Sound System
A
Press MENU button , Press 34button to select
Tuning, press OK to enter its submenu.
Press OK button to confirm .
B
Press 6button to select Sound System,
Press34button to select DK/I/BG/M.
LED Backlit Flat TV Instruction Manual EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
C
Press RETURN button to return to the previous
menu, press EXIT button to exit the menu screen.
D
Press EXIT button to exit menu screen.
Manual Search
Channel Edit
A
Press MENU button and then use34button to
select Tuning menu. press OK to enter its submenu.
You can add a label to a channel to make it easier to find.
A
Press MENU button and then use 34button to
select Tuning menu. press OK to enter its submenu.
B
Press 6button to select Manual Search , press
OK to enter its submenu.
B
Press6button to select the Channel Edit, press
OK to enter its submenu.
C
D
Press34button to adjust the Frequency.
Press MENU button to return to the previous menu,
press EXIT button to exit the menu screen.
C
Press 6button to select the channel you want to
edit . Press the GREEN button on the remote control,
Choose the other Channels to Exchange, Press OK
Confirm Exchange. If select the RED button ,the
channel with a check icon is a skipped channel. Press
OK button to display "please Input Channel Name",
Select OK or Cancel. Press EXIT button to return to
the previous menu.
Auto Search
A
B
C
Press MENU button and then use34button to
select Tuning menu. press OK to enter its submenu.
Press 6button to select Auto Search, Press OK
button on the remote to start to scan.
Press MENU button to return to the previous
menu, press EXIT button to exit the menu screen.
Fine Tune
A
Press MENU button and then use34button to
select Tuning menu. press OK to enter its submenu.
B
Press 6button to select Fine Tune, Press OK
button on the remote to enter its submenu.
All channels now available will be automatically preset in
older .After the search has finished, the firet program
number will display on the screen.
This search automatically adds only the active channels
in your area to the TV's memory.
It deletes any channels on which there is no broadcast or
a poor signal.
C
Press 34button to select your desired Frequency.
The channels found are automatically saved.
EN-15 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
Y Picture Mode
This will select the picture mode. Select Standard/
Vivid/Soft/User, according to the program.
Using Your TV
Y Brightness
How to Select the TV Program
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
A
Using Program number button Enter the channel
number with the number keypad on the remote
control.
En
Y Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
B
Using CH∧/CH∨ button.
Press the CH∧/CH∨button to select a channel
number.
Y Color
This will adjust the saturation level of the colors to suit
your personal preference.
How to Adjust Volume
Y Sharpness
This will adjust the sharpness of fine details in the
picture.
Press
button on the remote control or the keypad
on the TV to adjust the volume level.
Y Color temperature
Press34button to set Color temperature as
Standard, Cool, Warm.
Adjusting Picture
Settings
This will increase or decrease Warm (red) and Cool
(blue) colors to suit personal preferences.Select Cool
to give the white color a blue tint, Standard to give
the white color a natural tint, Warm to give the white
color a red tint.
Changing the Picture Setting
Y Aspect Ratio
A
Press MENU button.then press34button to select
Picture , press OK button to enter.
Press 34button to set Advanced Ratio as
Panorama, Cinema, Zoom, JUST SCAN, FULL
SCREEN, 4:3.
Y DNR
Press 34button to set DNR as AUTO, High, Off,
Low, Medium.
Y Color Management
Press34button to set Colour Management as
Auto, On, Off.
Y 3D Setting
Ensure you read and understand the following safety
information before using the TV's 3D function.
B
Press6button to select the item which requires to
be adjusted.
C
D
Press34button to adjust the selected item.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
RETURN button to return to the previous menu.
LED Backlit Flat TV Instruction Manual EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
▲ The TV doesn’t store the 3D mode settings, so if
you switch it off, it will return to 2D mode when
turned back on again.
Note
▲ Some people may experience discomfort, such as
dizziness, nausea and headaches, while viewing
3D TV. If you experience any such symptom, stop
watching 3D TV, remove the 3D glasses and have
a rest.
▲ In USB mode, there are various modes of 3D video
sources. With USB signals, the 3D switch key only
functions when playing a film. The TV will exit
3D mode when the film finished or when you
manually exit 3D mode.
▲ Watching 3D images for an extended period of
time may cause eye strain. If you feel that your
eyes are becoming strained, stop watching 3D TV,
remove your 3D glasses and have a rest.
Adjusting Sound
Setting
▲ Do not allow children under 6 years old to view
3D images. A responsible adult should frequently
check on children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness or nausea, stop the child from watching
3D TV and have a rest.
Changing the Sound Setting
▲ Do not use the 3D glasses for other purposes
(such as general spectacles, sunglasses, protective
glasses etc.)
A
B
Press MENU button.
▲ Do not use the 3D function or 3D glasses while
walking or moving around. If you use the 3D
function or 3D glasses while walking or moving
around you may run into objects, trip and/or fall
and injure yourself.
Press34button to select Sound , press OK button
to enter.
C
D
Press6button to select the item which require to
be adjusted.
▲ Do not drop, exert pressure on or step on the 3D
glasses.
Press34button to adjust the selection item.
▲ Do not use the 3D glasses if they are cracked or
broken.
If the TV is currently in 2D mode,
A
Press the 3D switch key on the remote to display the
prompt menu.
B
Press34button. You can then select a
corresponding 3D mode.
E
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
RETURN button to return to the previous menu.
If the TV is currently in 3D mode,
Y Sound Mode
This sound setting can be adjusted to suit your
personal preference . Select Standard/Music/Movie/
News/User according to the program.
A
Press the 3D switch key on the remote to display
the prompt menu.
Y Treble
B
Press34button to select 3D Mode off/2D>3D
Adjust to increase or decrease higher-pitched sounds.
setup.
Note
Y Bass
▲ When you watch a 3D TV programme, please wear
3D glasses.
Adjust to increase or decrease lower-pitched sounds.
EN-17 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
Y Balance
Press34button to select Last Viewed /Navigator /
Select Source.
Adjust to emphasize left or right speaker balance.
Y SubWoofer
Adjust to increase or decrease subwoofer-pitched
sounds.
Y Surround
The surround sound feature expands
En
the audio listening field wider and deeper to create
exceptional sound quality from the TV's speakers.
Press6button to select Select Port, press 34to
Y Dialog Clarity
Press34button to set AVL as On or Off.( When
Surround is set on, it's will appearance.)
select TV/AV/YPbPr/PC/HDMI1/HDMI2.
Y Reset
Press34button to select OK or Cancel to Reset
Factory Set.
Y Bass Boost
Press34button to set the SPDIF as On or Off.( When
Surround is set on, it's will appearance.)
Y DNLP
Press34button to select On/Off to auto regulation
contrast or brightness.
Y OPC
Setting Functions
Press34button to select On/Off to set OPC.
A
Press MENU button.
B
Press34button to select Setting, press OK button
to enter.
Cloud Functions
C
Press6button to select the item which require to be
Cloud Functions
adjusted.
D
E
Press34button to adjust the selected item.
A
B
Press
button to enter Cloud interface.
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
RETURN button to return to the previous menu.
Press634button to select the icon which you
required. Press OK to enter.
C
When you are satisfied with your choice,press
RETURN button to return to the previous menu.
Y Menu Time
Press34button to select the number of minutes: To
select 5s,10s, 15s, 30s, 60s.
D
Press MENU button in this interface of Cloud stair
menu, the OSD will display Wallpaper, Manage apps
and System settings. You can press6button and
press OK button to select it.
Y Startup Select
Press6button to select the Startup Select,
LED Backlit Flat TV Instruction Manual EN-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
E
If you want to Exit Cloud functions, press Exit
button.
All Apps
A
B
Press
button to enter Cloud interface.
Press634button to select ALL Apps. Press OK
to enter.
C
Press634button to select the item which
require to be adjusted.
• Photo: *. jpg, png etc.
• Music: . Mp3(8-320kbps; WMA(32-192kbps);
*
AAC(16-576kbps) etc.
• Movie:
MPEG4: . avi files in accordance with Div*4. x/5. x
*
Protocol;
MPEG2: some . mpeg files;
*
MPEG1: . dat and some . mpeg files;
RealVideo ect.
*
*
• Text: . Txt.
*
D
When you are satisfied with your choice,press
The ALL Apps contions all functions of Cloud, you
can enter this submenu for example Settings by ALL
Apps.
RETURN button to return to the previous menu.
Browser
D
When you are satisfied with your choice,press
RETURN button to return to the previous menu.
A
B
Press
button to enter Cloud interface.
Press634button to select the icon which you
required. Press OK to enter.
Local FileBrowser
A
B
Press
button to enter Cloud interface.
C
D
Press the corresponding key on the remote control
to call out the prompt menu. (See Picture below).
Press634button to select Local FileBrowser.
Press OK to enter.
When you are satisfied with your choice,press
RETURN button to return to the previous menu.
C
Press6button to select the USB STORAGE-
SANDISK. Press the corresponding key on the
remote control to call out the prompt menu. (See
Picture below).
EN-19 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
Settings
5IFꢀ.PEFNꢀ1PSUꢀPOꢀUIFꢀ8BMM
&YUFSOBMꢀ.PEFN
"%4-ꢀꢁꢀ7%4-ꢀꢁꢀ$BCMFꢂ
A
B
Press
button to enter Cloud interface.
.PEFNꢀ$BCMF OPUꢀTVQQMJFEꢂ
Press 634button to select Settings. Press OK
to enter.
-"/ꢀ$BCMF
OPUꢀTVQQMJFEꢂ
#BDLꢀPGꢀ57
C
Press6button to select the item which require to
be adjusted.
3PVUFS
En
LAN
-"/ꢀ$BCMF OPUꢀTVQQMJFEꢂ
• Depending on how your network is configured,
you may be able to attach your TV to your LAN by
connecting the LAN port on the back of your TV
directly to a network wall outlet using a Cat 5 cable.
See the diagram below. Note that the wall outlet is
attached to a modem or router elsewhere in your
house.
5IFꢀ.PEFNꢀ1PSUꢀPOꢀUIFꢀ8BMM
#BDLꢀPGꢀ57
Connecting to a Wired Network
LAN
A
Press 6button to select Ethernet, press OK to
enter.
-"/ꢀ$BCMF OPUꢀTVQQMJFEꢁ
B
Press 6 button to select DHCP item, then
press Save button, it will automatically finished.
Note
„
The terminals (the position of the port and the
type) of the external device may be different
depending on the manufacturer.
You can set up your TV to access the Internet through
your local area network (LAN) using a wired or
wireless connection.
Connecting to a Wired Network. You can attach your
TV to your LAN using a cable (cable not included) in
three ways:
• You can attach your TV to your LAN by connecting
the LAN port on the back of your TV to an external
modem using a Cat 5 cable. See the diagram below:
„
If the IP address allocation by the DHCP server
has failed, turn the external modem off, turn it
on again after at least 10 seconds and then try
again.
„
For the connections between the external
modem and the router, refer to the owner’s
manual of the corresponding product.
5IFꢀ.PEFNꢀ1PSUꢀPOꢀUIFꢀ8BMM
&YUFSOBMꢀ.PEFN
"%4-ꢀꢁꢀ7%4-ꢀꢁꢀ$BCMFꢀ57ꢂ
„
„
You can connect the TV to the LAN directly
without connecting it through a router.
You cannot use a manual-connection-type ADSL
modem because it does not support DHCP. You
have to use an automatic connection-type ADSL
modem.
.PEFNꢀ$BCMF OPUꢀTVQQMJFEꢂ
#BDLꢀPGꢀ57
-"/ꢀ$BCMF
OPUꢀTVQQMJFEꢂ
LAN
Connecting to a Wireless Network
A
B
C
Press 6button to select WI-Fi, press OK to
enter, To see available networks, turn Wi-Fi On.
• You can attach your TV to your LAN by connecting
the LAN port on the back of your TV to a router.
which is connected to an external modem. Use a Cat
5 cable for the connection. See the diagram below:
Press 6 button to select Wireless Setting
item,press OK button to enter.
Press 6 button to select the network you need
LED Backlit Flat TV Instruction Manual EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Receiving and Playing Operations
and press OK button to enter.
Press 6button to select Storage or Apps. When
select Storage, Press OK to enter, It's will display
informations of USB. When you select Apps, press OK
to enter and press 4button, then press6button to
select the item which you required.
D
E
Press 6 button to select the Network security
key and press OK button to enter .
Enter the password if necessary. Select OK to
confirm.
Y PERSONAL
Press 6button to select Security/
Language&input / Backup&reset. Press OK and
press4to enter. Press6button to select the item
which require to be adjusted.
To connect your TV to your wireless network, you
need a wireless router or modem.
Y SYSTEM
Press 6button to select Date & Time/
About Device. Press OK and press4to enter.
Press6button to select the item which require to
be adjusted.
8JSFMFTT
3PVUFS
5IFꢀ-"/ꢀ1PSUꢀPOꢀUIFꢀ8BMM
-"/ꢀ$BCMF
Note
▲ To use a wireless network, your TV must be
connected to a wireless router. If the wireless
router supports DHCP, your TV can use a DHCP
or static IP address to connect to the wireless
network.
You Tube
A
B
Press
button to enter Cloud interface.
▲ If the wireless router allows you to turn the Ping
connection function on/off, turn it on.
Press634button to select the icon which you
required. Press OK to enter.
▲ Select a channel for the wireless router that is not
currently being used. If the channel set for the
wireless router is currently being used by another
device nearby, this will result in interference and
communications may fail.
C
D
Press6button to select the item which require to
be adjusted.
When you are satisfied with your choice,press
▲ This series include build-in Wi-Fi dongle, but Haier
reserves the right to make changes without further
notice to any products herein to improve reliability,
function or design.
RETURN button to return to the previous menu.
Twitter
A
Press
button to enter Cloud interface.
Y DEVICE
EN-21 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance/Troubleshooting
B
C
D
Press634button to select the icon which you
required. Press OK to enter.
Cleaning the Screen
Press6button to select the item which require to
be adjusted.
A
Here’s a great way to keep the dust off your screen
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
When you are satisfied with your choice,press
RETURN button to return to the previous menu.
En
B
Make sure the excess water is off the screen, and
then let it air-dry before you turn on your TV.
Facebook
A
B
Press
button to enter Cloud interface.
Press634button to select the icon which you
required. Press OK to enter.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
C
D
Press6button to select the item which require to
be adjusted.
When you are satisfied with your choice,press
RETURN button to return to the previous menu.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Net FileBrowser
Net File Browser is a standard that allows various
consumer electronic devices to
share connect with each other across a standard home
network.This would allow a device such as a Net File
Browser compatible television to play music or view
videos or photos stored on a desktop computer or other
compatible device.
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you checkout the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
assistance.
A
B
Press
button to enter Cloud interface.
Press 34button to select APPS, Press OK button to
enter.
Problem
Possible remedies
C
Press 634button to select Net File Browser,
then press OK button to play it.
Turn on the power supply; Properly
plug theTV setto the powersocket;
Check to see if the power cable of other
appliance is plugged in the TV set. Make
sure that the power cable of the TV set
is properly connected.
No
picture,
no sound
Maintenance
Problem
Possible remedies
Good
picture,
no sound
Depress the volume button;
Check out the audio frequency input signals.
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Check to see if the remote controller
display receiving window are blocked
by other objects and if batteries are
properly loaded.
Failure of
remote
controller
LED Backlit Flat TV Instruction Manual EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification/Format
Designate the item of color from the
Color System PAL, NTSC, SECAM, AUTO
Picture menu and depress the volume
button; Keep the display and VCR
Video Input
USB,AV, Component, HDMI or PC,
No color,
weak color separate a reasonable space; Activate
Operating temperature range:
+5°C - +35°C Operating
humidity range: 20%-80%
Storage Temperature:
-15°C~+45°C
or poor
picture
some functions to store picture
brightness; Make sure that the display
and signal source are available and
turned on.
Excessive
brightness
or darkness
Storage Humidity: 5%-90%,
non-condensing
Adjust brightness or contrast.
Environmental
condition
If the storage temperature is
lower than 0 °C, please first
lays the machine aside after
in the operating temperature
environment carries on restores
2 hours, then electrifies the use
again, protects your television
not to receive the damage.
Picture
too big or
small
Adjust the setup of sizes.
One
speaker
failure
Balance the sound in the menu.
Slight
sound
from
It is a normal phenomenon.
display
Product main size (contain stand)
Note
Power
Consumption
Net
Weight
▲ Do not leave the television with static picture in an
extended period as it may result in residual image
on your television screen.
MODEL
Net Size(LxWxH)
LE42H5000
LE47H5000
LE55H5000
120W
130W
160W
961x222x613mm
1070x222x676mm
1243x280x773mm
15.5Kg
18.5Kg
27Kg
Note
▲ Production of the screen requires high and precision
technologies. However, there might be some
dark or bright (red, blue or green) spots, or some
anomalistic stripes or spots. This is not defect. If the
TV set is used in an area 2,400 meters above the sea
level where the air pressure is below 750hpa, the
picture on the screen maybe affected and a muffled
sound might be produced. These phenomena
might happen in the area 1,500 meters above the
sea level. This is resulted from difference between
air pressures inside and outside the display. This is
not a defect covered by the limited warranty.
Note
▲ Design and specifications are subject to change
without notice. The dimension in this manual is a
approximation.
Format
Recommendatory HDTV/
SDTV(YP P /YC C )format
b r b r
Specification
Basic specification and parameter
Sequence
Number
Refresh
Format
Frequency (Hz)
1
2
480i/480p
576i/576p
60
50
Power
100-240V~ 50/60Hz
EN-23 LED Backlit Flat TV Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
3
4
720p
50/60
50/60
1080i/1080p
Recommendation PC connection
input format
En
sequence
number
H-Frequency
(KHz)
V-Frequency
(Hz)
Format
1
2
640*480@60Hz
800*600@60Hz
31.5
60
60
37.88
1024*768@60Hz
(Recommendatory)
3
48.36
60
Recommendation DVI connection
input format
Sequence
Resolution
Refresh Frequency (Hz)
Number
1
2
3
640*480
800*600
1024*768
60
60
60
Recommendation HDMI
connection input format
Sequence
Number
Format
Refresh Frequency (Hz)
1
2
3
4
480i/480p
576i/576p
720p
60
50
50/60
50/60
1080i/1080p
LED Backlit Flat TV Instruction Manual EN-24
Download from Www.Somanuals.com. All Manuals Search And Download.
|