Grundig Flat Panel Television 8140 S User Manual

LCD TV  
HAMBURG 32 VLC 8140 S  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents--------------------------------------------------------------------------------------------------------------------------------------  
49- operAtion-As-A-pC-monitor  
49 Connecting a PC  
-
49 Selecting presets for the PC  
49 Settings for PC mode  
50- operAtion-with-A-Common-  
interFACe  
-
50 What is a Common Interface?  
50 Inserting the CA module  
50 Access control for CI module and  
smart card  
51- speCiAl-settinGs  
51 Searching for digital television channels  
from a satellite automatically  
-
52 Searching for digital television  
channels from a satellite automatically  
52 LNB settings  
53 Settings for motorised antennas  
(DiSEqC 1.2)  
55 Searching for digital terrestrial  
TV channels automatically  
56 Searching for digital terrestrial  
TV channels manually  
56 Tuning analogue television channels  
58 Changing stored analogue channels  
60- inFormAtion  
-
60 Displaying signal information  
61 Technical data  
62 Service information for retailers  
62 Environmental note  
63 Troubleshooting  
-3  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup-AnD-sAFetY-------------------------------------------------------------------------------------------------------  
7
Please note the following instructions when  
setting up the television set:  
Make sure the power cord or the power sup-  
ply unit (if provided) are not damaged.  
7
7
7
This television is designed to receive and dis-  
Only operate the television with the power  
supply/power cord provided.  
play video and audio signals.  
All other uses are expressly prohibited.  
Thunderstorms are a danger to all electrical  
devices. Even when the television is switched  
off, it can be damaged by a lightning strike to  
the mains or the antenna. Always disconnect  
the mains and antenna plugs during a storm.  
7
The ideal viewing distance is five times the  
diagonal screen size.  
7
Light falling on the screen impairs picture  
quality.  
7
7
Use a damp, soft cloth to clean the screen.  
Do not use water with soap or detergent.  
7
To ensure the device is always adequately  
ventilated, make sure there is sufficient space  
between the television set and nearby furni-  
ture.  
Only clean the housing of your television set  
with the cloth provided. Do not use water with  
soap or detergent.  
7
The television is designed for use in dry rooms.  
7
If you do use it outdoors, make sure it is pro-  
tected from moisture such as rain or splashing  
water.  
When deciding where to put the device, re-  
member that furniture is often coated with  
various types of varnish and plastic. Many of  
these contain chemicals which can corrode  
the feet of the device, leaving marks on the  
surface of the furniture which can be difficult  
or impossible to remove.  
Never expose the television set to moisture.  
7
Do not place any vessels such as vases on the  
television, as they may spill liquid, thus present-  
ing a safety risk.  
7
The screen of your LCD television meets  
the highest quality standards and has been  
checked for pixel faults.  
Despite the great care taken in manufacturing,  
technological reasons make it impossible to  
completely discount the possibility that some  
pixels may be faulty.  
Provided they are within the thresholds speci-  
fied by the DIN norm, pixel faults of this kind  
cannot be regarded as a defect as defined by  
the warranty.  
7
Place the television on a hard, level surface.  
7
Do not place any objects such as newspapers  
on the television or put cloth or similar items  
under it.  
7
Do not place the television close to heating  
units or in direct sunlight, as this will impair  
cooling.  
7
Heat build-up can be dangerous and shortens  
the service life of the television. For reasons of  
safety, have a repairman remove any dirt in  
the television from time to time.  
7
To ensure fires do not occur,  
always keep candles and other  
open flames away from the device.  
7
Never open the television under any circum-  
stances. Warranty claims are excluded for  
damage resulting from improper handling.  
-4  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
setup-AnD-sAFetY-------------------------------------------------------------------------------------------------------  
7
Do not connect any other equipment while the  
device is switched on. Also switch off other  
equipment before connecting it.  
7
Do not plug in the power cord of the device  
until you have connected the external equip-  
ment and the antenna.  
7
Make sure the mains plug is freely accessible.  
Caution:  
7
If you plan on using a wall bracket for your  
television, make sure you read the assembly  
manual for the wall bracket or have a spe-  
cialist assemble it.  
7
When purchasing the wall bracket, make  
sure that all the fastening points on the televi-  
sion are also on the wall bracket and that  
they are all used when mounting it.  
-5  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GenerAl-inFormAtion----------------------------------------------------------------------------------  
special-features-of-your-  
-television-set  
7
You can receive and watch digital TV channels  
using your television set (via DVB-S, DVB-T and DVB-  
C) – including High Definition programmes (HD).  
However, the reception of digital TV channels in HD  
is currently limited to a few countries in Europe.  
7
Although this television set complies with the current  
DVB-S, DVB-T and DVB-C standards (status: August  
2010), the compatibility with future DVB-S satellite  
transmissions as well as terrestrial DVB-T and DVB-C  
cable programmes cannot be guaranteed.  
7
Your television set can receive and process  
all analogue and non-encrypted digital  
TV channels. The television set is also equipped  
with digital and analogue receivers.  
7
The electronic TV guide (for digital channels  
only) informs you about any schedule changes  
at short notice, and provides an overview of  
all the broadcasters' schedules for the next few  
days. Detailed information on the individual  
television programmes are – when provided  
by the broadcasting station – are also avail-  
able in the electronic TV guide.  
7
You can connect various data media, such as  
an external hard drive, a USB memory stick or  
a digital camera, to the USB socket. Using the  
file browser, you can then select and play the  
file formats of your choice (for example, MP4,  
MP3 or JPEG data).  
7
Using the time shift function, you can quickly and  
easily pause a programme using the remote  
control and resume it at a later stage. The pro-  
gramme is recorded in an external data medium.  
7
You can record any digital TV channels you  
choose.  
The TV channels are converted by the televi-  
sion and saved on an external data medium  
which is connected to the USB socket.  
The saved programmes can be called up and  
played from the archive on the external data  
medium at any time.  
You can also play a programme from the  
archive while recording another.  
More information on recording and playing  
TV programmes can be found on page 26.  
-6  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GenerAl-inFormAtion----------------------------------------------------------------------------------  
receiving-digital-channels  
You require a satellite antenna to receive  
digital satellite channels (DVB-S).  
important-notes-on-  
7
environmental-protection  
7
The following information will help you to save  
resources – and money as well.  
7
You require a digital roof antenna or indoor  
antenna (passive or active indoor antenna  
with its own power supply) to receive digital  
television channels (DVB-T).  
7
If you are not using your television set for  
several days, you should pull out the mains  
plug for environmental and safety reasons.  
This way the television does not consume any  
electricity.  
7
If you wish to receive digital television chan-  
nels via your cable system (DVB-C), the an-  
tenna cable for your cable operator must be  
connected to the television set.  
7
As switching off the television set does not  
completely disconnect it from the mains, pull  
out the plug to disconnect it from the mains  
completely.  
7
Unlike analogue broadcasting, not every  
channel has its own transmission frequency.  
Instead, several channels are grouped into  
what are known as bouquets on a regional or  
national level. You can find the current trans-  
mission information on teletext from various  
broadcasters, or by consulting a current TV  
guide or the Internet.  
7
If the device is equipped with a power switch,  
switching it off using this switch will be suffi-  
cient. The energy consumed by the television  
set is reduced to virtually 0 W.  
7
In standby mode, the television set uses very  
low energy. However, it may be necessary  
to leave the television set in standby mode  
for certain functions (for example automatic  
switch-on and switch-off and for timer func-  
tions).  
7
Various digital television channels from private  
broadcasters are encrypted (DVB-S, DVB-T  
and DVB-C). Watching these channels and  
the recording and playback functions are only  
possible with the appropriate CI module and  
a SmartCard. Ask your specialist dealer.  
7
The television set uses less energy when the  
brightness is reduced.  
The range of channels available from the pub-  
lic broadcasting institutions (ARD with EinsEx-  
tra, EinsFestival or ZDF with ZDF Info and all  
third party broadcasters) are not encrypted  
and can be received without a SmartCard.  
-7  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConneCtion-AnD-prepArAtion------------------------------------------------  
Connecting-the-antenna-and-power-cord  
1
3
2
1
To receive digital satellite channels (DVB-S),  
connect the satellite antenna cable to the  
antenna socket »sAtellite« on the televi-  
sion set.  
note:  
7
When connecting an indoor antenna you  
may have to try it out at different positions  
until you get the best reception.  
And/or:  
3
Plug the power cord into a wall socket.  
2a To receive terrestrial digital broadcasters  
(DVB-T) connect the cable for the rooftop  
or indoor antenna (passive or active indoor  
antenna with its own power supply) to the an-  
tenna socket »Ant-in« on the television set;  
note:  
7
Do not plug in the power cord of the device  
until you have connected the external equip-  
ment and the antenna.  
7
Only use the power cord supplied to connect  
or  
the television set to a suitable earthed safety  
socket.  
2b To receive digital cable channels (DVB-C)  
connect the cable for the rooftop antenna  
to the antenna socket »Ant- in« on the  
television set;  
7
Do not use an adapter plug or extension  
lead which does not meet the applicable  
safety standards. Do not tamper with the  
power cord.  
or  
2c To receive analogue TV channels, connect  
the cable for the rooftop antenna to the an-  
tenna socket »Ant-in« on the television set  
-8  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConneCtion-AnD-prepArAtion------------------------------------------------  
environmental-note  
inserting-batteries-into-the-  
-remote-control  
7
This symbol on recharge-  
able batteries/batteries or  
on the packaging indicates  
that the rechargeable bat-  
tery/battery may not be disposed of with  
regular household rubbish. For certain  
rechargeable batteries/batteries, this sym-  
bol may be supplemented by a chemical  
symbol. Symbols for mercury (Hg) or lead  
(Pb) are provided if the rechargeable batter-  
ies/batteries contain more than 0.0005%  
mercury or more than 0.004% lead.  
Rechargeable batteries/batteries, including  
those which do not contain heavy metal,  
may not be disposed of with household  
waste. Always dispose of used batteries  
in accordance with local environmental  
regulations. Make enquiries about the appli-  
cable disposal regulations where you live.  
1
2
Open the battery compartment by removing  
the lid.  
Insert the batteries (2 x 1.5 V micro, for  
example R03 or AAA). Observe the po-  
larity marked in the bottom of the battery  
compartment.  
3
Close the battery compartment.  
note:-  
7
If the television no longer reacts properly  
to remote control commands, the batteries  
may be flat. Always remove used batteries.  
7
The manufacturer accepts no liability for  
damage caused by leaking batteries.  
-9  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
Connections-on-the-television-set  
spDiF-  
Socket for audio output  
(coaxial) for PCM/AC3  
signals.  
For connecting digital AV  
amplifiers or AV receivers.  
sAtellite  
Av1  
Antenna socket for the  
satellite antenna (DVB-S).  
SCART socket (FBAS signal,  
RGB signal).  
AuDio-out-l-r Sockets for audio output.  
optical-out  
Socket for audio output  
(optical) for PCM/AC3  
signals.  
For connecting digital AV  
amplifiers or AV receivers.  
Component  
Y-pb-pr  
Sockets for video input  
(YUV signal).  
l--r  
Sockets for audio input  
(YUV signal).  
-10  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
pC-Audio  
Socket for audio  
input for a PC.  
Controls-on-the-television-set  
8/i-  
Switches the television on and  
back into standby mode.  
The only way to disconnect the  
television from the mains supply  
is to pull the plug.  
pC-in  
VGA socket, video input  
for PC.  
Ant-in  
Antenna socket for a DVB-T,  
DVB-C and analogue  
antenna.  
v–--v+  
menu-  
Adjusts the volume;  
selects menu functions.  
hDmi2  
hDmi3  
hDmi4  
usB-hDD  
HDMI socket,  
audio/video input.  
-Opens the menu.  
Select a menu option with  
»p+« or »p–«.  
HDMI socket,  
audio/video input.  
Activate the function with  
»v+« or »v–«.  
HDMI socket,  
audio/video input.  
Confirm the function with  
»v+« or »v–«.  
-USB socket for external  
data media without a power  
supply of their own and  
PVR function.  
Press »menu« to quit the menu.  
--  
Opens the pre-selection for  
AV channels.  
In the menu, press »p+« or »p–«  
to select and press »v+« or »v–«  
to confirm.  
U
Headphone jack (3.5 mm  
jack plug).  
s-vhs  
video  
l--r  
Video socket for  
p–--p+  
Switches the television on from  
standby;  
selects channels in steps;  
selects function in the menu.  
S-Video camcorder.  
Video socket for  
camcorder.  
Audio socket for  
camcorder.  
hDmi1  
usB-  
HDMI socket,  
audio/video input.  
-USB socket for external  
data media and  
PVR function.  
Ci- -  
-Common Interface Slot.  
-11  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
the-remote-control-–-main-functions  
Switches on from standby;  
Selects channel – directly  
Switches on and off  
(Standby).  
Selects the channel list  
(»All«, »FAV 1« to »FAV 4«).  
Switches between  
teletext and TV mode.  
Opens the selection menu to  
change picture formats.  
Opens the »HDMI CEC De-  
vice List«.  
Then select with » « or » «  
<
>
and press »oK« to confirm.  
Displays information.  
-Zapping function;  
switches back one menu  
level in the menus.  
Opens the main menu  
-Opens the channel list.  
Opens the electronic  
TV guide.  
Opens the TOOLS menu.  
Adjusts the volume.  
Opens menu for AV channels  
and USB input.  
Then select using »  
v«, » «,  
<
» « or » « and press »oK«  
Λ
>
to confirm.  
Muting  
Switches on from standby;  
Selects channel – in steps.  
Record, play, pause and  
stop (only digital television  
channels - to/from external  
USB device).  
Opens the »PRnP« menu.  
navigation-in-the-menus  
-
and down in the menus.  
-
right in the menus.  
-Activates various functions and  
save functions/settings.  
-12  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
overview-------------------------------------------------------------------------------------------------------------------------------------  
3
Stops scrolling through pages in  
teletext;  
Starts a fast reverse search in the  
file browser.  
the-remote-control-–--  
All-functions  
» «-  
-
Selects pages in teletext.  
(red)  
»
»
»
« (green)Selects/activates various functions  
  
  
  
4
Reveals answers in teletext;  
Starts a fast forward search in the  
file browser.  
« (yellow)  
« (blue)  
in the menus.  
Starts the recording (  
television channels  
is made on an external data me-  
dium).  
only for digital  
, the recording  
Selects different subtitles  
(only for digital television channels)  
Selects different audio languages  
(only for digital television channels)  
8
!
Starts playing a programme from  
an external data medium;  
Repeats a recorded programme.  
Freeze frame, if no external data  
medium is connected;  
Playback pause;  
Time shift mode (only for digital  
television channels and when  
an external data medium is con-  
nected).  
7
Ends playback of a programme  
from an external data medium;  
Ends a recording or  
playback in time shift mode.  
Splits the screen in teletext.  
5
6
Switches to double character size  
in teletext;  
Selects the next title/next picture in  
the file browser.  
Refreshes a teletext page;  
Selects the previous track/previous  
picture in the file browser.  
-13  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
selecting-language,-country-and-  
operating-mode  
initial-set-up-and-tuning-  
-television-channels  
The television set is equipped with automatic  
channel search, which searches for satellite chan-  
nels (DVB-S), terrestrial channels (DVB-T), cable  
channels (DVB-C) and analogue channels.  
1
Switch on the television set from standby with  
»8«, »1…0« or »p+« or »p-«.  
– During initial set-up, the »Installation Guide«  
will be displayed.  
You start the search and can then copy the tel-  
evision channels into four favourite lists and sort  
them there into your order of preference.  
help:-  
7
If this menu is not displayed, restore the  
television set to its default settings (see  
page 42).  
For DVB-S channels there are 6000 presets  
available, for DVB-T and DVB-C channels 1000  
presets, and 100 presets for analogue channels.  
2- Select the menu language with » «, » «,  
<
>
»v« or »  
Λ« and press »oK« to confirm.  
3- Select the mode with » « or » « and press  
<
>
the-various-settings  
»oK« to confirm.  
Depending on the type of antenna connected,  
you can decide which channels you would like  
the television to search for.  
– The settings used in »Home Mode« help to  
save energy.  
– Alternatively, the menu item »Shop Mode«  
can be selected which the retailer can use  
for demonstrating the device functions.  
7
Tunes digital television channels from the satel-  
lite, from page 15.  
You have two options for this search:  
– the basic installation which presets a stand-  
ard selection, e.g. the satellite Astra 19.2°  
East; you need only start the search;  
– the professional installation, which allows  
you to make all required settings and set pa-  
rameters for your receiver system.  
note:  
7
End the »Shop Mode« by restoring the televi-  
sion set to its default settings (see page 42).  
4- Select the country in which the television set  
is operated with » «, » «, »v« or »Λ« and  
<
>
press »oK« to confirm.  
– The »Source Setup« menu appears with the  
»Connection Type« line marked.  
7
Tunes digital terrestrial television channels, on  
page 17.  
note:  
7
Tunes digital television channels from the  
7
You can find a description of how to tune  
cable provider, on page 17.  
the television channel of your choice – de-  
pending on the antenna connected – in the  
following chapters.  
7
Tunes analogue television channels, in the  
chapter “Special functions”, starting on  
page 56.  
7
Further settings for digital television channels  
after the initial set-up can also be found in  
the chapter “Special functions”, starting on  
page 51.  
note:-  
7
Make the language and country selection for  
all types, then continue reading the respective  
chapter.  
-14  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
Advanced-installation  
tuning-the-television-channels-  
from-satellite-(DvB-s)  
You have two options for tuning digital satellite  
channels.  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Satellite«  
with » « or » «.  
<
>
2
Select the line »Advanced Installation« with  
A
B
The easy installation,  
which pre-configures all antenna settings for  
the satellite channels on Astra 19.2° East.  
»
v« or »Λ« and press »oK« to confirm.  
– The menu appears.  
The advanced installation  
20.09.2010  
15:46  
INSTALLATION  
can be used if you wish to receive satellite  
channels from various satellites. To do so,  
you must make the antenna settings (Satel-  
lite, LNB Power, LNB Type, DISEqC Mode,  
LNB Selection) for the satellites chosen.  
ANTENNA SETTINGS  
Satellite  
ASTRA 2A°,E  
10714 MHZ H  
Off  
Transponder  
LNB Power  
LNB Type  
easy-installation  
Universal  
Auto  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Satellite«  
with » « or » «.  
22 kHz  
DISEqC Mode  
LNB Selection  
Off  
<
>
1/4  
2
Select the line »Easy Installation« with »  
or » « and press »oK« to confirm.  
v«  
Λ
Low  
Normal  
Good  
Quality  
– Other menu options will be displayed,  
the satellite Astra 19.2° East is preset.  
Signal strength  
Exit  
Auto Tuning  
Back  
3
Start the scan with » « (green).  
  
Manual Tuning  
– The »Search results« menu appears, and  
the scan for TV channels begins.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
3
Select the line »Satellite« with »  
v« or »Λ«  
and press »oK« to confirm.  
– The »SELECT SATELLITE« menu appears.  
Select the satellites with »v«, »Λ«, » « or  
<
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
» « and press »oK« to confirm.  
>
note:  
note:  
7
The setting in the line »Transponder« is not  
required for this automatic scan.  
7
You can abort the scan by pressing  
»menu«.  
4
5
Select the line »LNB Power« with »  
v« or  
»
Λ«.  
Depending on the type of LNB, set the LNB  
power supply to »13/18 V« or »14/19 V«  
with » « or » «.  
<
>
Select the line »LNB Type« with »v« or »Λ«  
and press »oK« to confirm.  
Select the type of LNB installed with » «  
<
or » «.  
>
Save the selection with  
»
.
« (green) or abort  
  
the action with » «-(red)  
-15  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
6- Select the line »DISEqC Mode« with »  
v«  
11 Start the scan with » «-(red).  
or »Λ«.  
– The »Results« menu appears, and the scan  
for TV channels begins.  
Select »DiSEqC 1.0« or »DiSEqC 1.1« in  
accordance with the existing antenna system  
with » « or » «.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
<
>
– DiSEqC 1.0 allows up to four satellites to  
be received simultaneously.  
– DiSEqC 1.1 allows up to 16 satellites to be  
received simultaneously.  
note:  
7- Select the line »LNB Selection« with »  
«.  
v« or  
7
You can abort the scan by pressing  
»menu«.  
»Λ  
Select the setting for the respective satellites  
with » « or » «.  
12 Press »menu« to end the setting.  
<
>
note:  
8- Once the settings for the satellite have been  
7
If other television channels are to be tuned  
from a second satellite, proceed as follows:  
made, switch to the »AUTOMATIC CHAN-  
NEL SEARCH« menu with » «-(red).  
Open the menu with »menu«, select the  
line »SOURCE SETUP« with »v« or »Λ«  
20.09.2010  
15:46  
SOURCE SETUP  
AUTOMATIC CHANNEL SEARCH  
and press »oK« to confirm. Then select the  
»Automatic Channel Search« with » « or  
« and press »oK« to confirm. Confirm  
the line »Select Satellite« with »oK« and  
select the preferred satellite with » «, » «,  
v
»Λ  
Connection Type  
Satellite  
Select Satellite  
Scan Mode  
ASTRA 2A , E  
Free + Scramble  
v
Λ
» « or » «. Start the scan with » «-(red).  
<
>
Service Type  
Network Search  
Radio + TV  
Off  
Continue the adjustment by step 7 of the  
chapter.  
Exit  
Start Search  
Back  
9
Select the line »Scan Mode« with »  
or » «.  
Select the scan mode with » « or » «  
(for unencrypted channels, for encrypted  
channels only, or for both).  
v«  
Λ
<
>
10 Select the line »Service Type« with »  
or » «.  
Use » « or » « to select whether you want to  
v«  
Λ
<
>
search for television channels only (TV), radio  
stations only (Radio) or both (Radio + TV).  
-16  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
tuning-terrestrial-television-  
channels-(DvB-t)  
tuning-television-channels-from-  
the-cable-provider-(DvB-C)  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Cable«  
with » « or » «.  
1
In the »Source Setup« menu, in the »Connec-  
tion Type« line, select the option »Air« with  
» « or » «.  
<
>
<
>
2
Select the line »Scan Type« with »  
«.  
Use » « or » « to set the required scan  
v« or  
2
Select the line »Scan Type« with »  
«.  
Use » « or » « to set the required scan  
v« or  
»Λ  
»Λ  
<
>
<
>
type:  
type:  
– »DTV«, scan for digital television channels;  
– »ATV«, scan for analogue television  
channels;  
– »DTV«, scan for digital television channels;  
– »ATV«, scan for analogue television  
channels;  
»ATV & DTV«, scan for analogue and  
digital television channels.  
»ATV & DTV«, scan for analogue and  
digital television channels.  
3
Select the »Scan Type« with »v« or »Λ«. Se-  
Caution:  
lect the preferred option (»Quick« or »Full«)  
with » « or » «.  
7
The antenna power supply (5V ) may only  
<
>
be switched on if the antenna is an active  
indoor antenna with a signal amplifier and it  
is not already supplied with a voltage via a  
mains plug (or similar supply). Otherwise  
you may cause a short circuit and irrepara-  
bly damage your antenna.  
– The search function »Quick« sets up the  
channels according to the information pro-  
vided by your cable provider in the trans-  
mission signal.  
– If the option »Full« is selected, the entire  
frequency range will be scanned. The  
search can take a long time with this op-  
tion. This option is recommended if your  
cable provider does not support the scan  
3
4
Selectthe»ActiveAntennaPower«with»  
or » «.  
v«  
Λ
Switch on the antenna power supply for the  
antenna with » « or » « (»On«).  
<
>
  
type  
»Quick«.  
Start the scan with » « (green).  
note:  
– The »Search Results« menu appears, and  
the search for TV channels begins.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
7
You can accelerate the search. To do this,  
you need information about the frequency  
and network ID. You are usually able to get  
this data from your cable operator or find it  
in forums on the Internet.  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
4
Start the scan with » « (green).  
  
The »Search Results« menu appears, and  
the search for TV channels begins.  
note:  
7
You can abort the scan by pressing  
»menu«.  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
5
Press »menu« to end the setting.  
note:  
7
You can abort the scan by pressing  
»menu«.  
5
Press »menu« to end the setting.  
-17  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
selecting-channel-lists  
Changing-the-program-table-for-  
the-digital-channels  
1
Open the menu with »menu«.  
Channels which are found using the scan are  
saved in the »PROGRAM TABLE«.  
2
Select the »SOURCE SETUP« menu with »v«  
or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
You can delete channels which are not required  
from the programe table, and lock individual  
channels (Parental control).  
3
Select the line »Programe Table« with »v«  
or »Λ« and press »oK« to confirm.  
– The menu »PROGRAM TABLE« appears.  
You can also add channels to the favourites list;  
in addition, you can change the order of chan-  
nels within the favourites list.  
important:  
7
Programe table and favourites lists are  
saved separately according to the different  
input sources (satellite, cable, air).  
With » « (green) you can display the channels  
  
which belong to one network.  
7
When opening the programme table, the  
respective channel list for the current input  
signal appears.  
Switch to the next page in the programe table  
with »p+« and to the previous page with »p-«.  
With »  
« (yellow) you can open the »LIST  
  
MANAGEMENT« within the programe table.  
INSTALLATION  
PROGRAM TABLE  
Network ALL  
1
Das Erste  
2
ZDF  
3
SAT1  
4
N24  
3sat  
5
SAT3  
1 Das Erste  
DTV  
DTV  
DTV  
DTV  
DTV  
6
24  
7
HD Sport  
8
HD Test  
9
10 RTL  
DTV  
DTV  
DTV  
DTV  
DTV  
11 HD 1  
12 Life  
13 Film  
14 Promo  
15 Sport1  
DTV  
DTV  
DTV  
DTV  
DTV  
16 TV Sport  
17 Sat.8  
18 SKY  
19 TV6  
20 TV5  
DTV  
DTV  
DTV  
DTV  
DTV  
Edit  
Network  
Manage lists  
Sorting  
Exit  
Select favourites  
Back  
-18  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
notes:  
Creating-lists-of-favourites  
You can save your favourite channels in up to  
four favourites lists (FAV 1 to FAV 4).  
7
Repeat steps 2 and 3 if you would like to  
change other channels within the same  
favourites list.  
notes:  
7
Repeat steps 1 to 3 if you would like to  
change other channels in a different favour-  
ites list.  
7
Favourites lists must be created separately  
for all input sources (satellite, cable and air).  
7
You can select the favourites list by pressing  
»FAv«.  
4
Exit the current favourites list with »  
(blue).  
– The entire programe table will appear  
again.  
«
  
1
2
3
In the »PROGRAM TABLE« menu, switch over  
to the list view with » « (yellow).  
  
Select the channel of your choice with »  
or »Λ«.  
v«  
Deleting-channels  
1
In the »PROGRAM TABLE« menu, select the  
television channel to be deleted with «,  
» « or » « and press » «-(red) to con-  
“Push” the channel into the favourites  
»
v
lists 1 to 4 with » « or » « and press »oK«  
<
>
»Λ«,  
<
>
to confirm.  
firm.  
– The position in the favourites list is marked  
with »«.  
– You can enter the same channel in more  
than one favourite list.  
– Each favourite list can store up to 255  
channels.  
2
3
4
Deletethecurrentchannelwith» «(yellow);  
delete all channels with »  
  
« (blue).  
  
Confirm the deletion process with »  
(green).  
«
  
Quit the deletion process with » «.  
<
note:  
7
Channels can also be deleted from the  
skipping-channels  
You can mark television channels which should  
be skipped when selecting with » « or » «.  
It is still possible to select them using the number  
buttons.  
favourites lists. Select the channel to be  
deleted with »  
v«, »Λ«, » « or » « and  
<
>
Λ
v
press »oK« to delete it.  
7
When deleting a channel from the favourites  
list, the order within the favourites list will be  
updated.  
1
2
3
In the »PROGRAM TABLE« menu, switch over  
to the list view with » « (yellow).  
  
4
Press »menu« to end the set-up.  
Select the preferred channel with »  
or »Λ«.  
v«  
sorting-channels-in-the-favourite-list  
You can change the order of channels in the  
favourites list.  
Select the column »Skip« with » « or » «  
and use »oK« to mark the channel.  
– The channel is marked by »«.  
<
>
1
In the »PROGRAM TABLE« menu, select the  
favourites list »1« to »4«.  
note:  
7
2- Select the channel which should be moved  
with » «, » «, » « or » « and mark it with  
» «-(red).  
Channels can also be reactivated. Select the  
v
Λ
channel with »v« or »Λ«, then select the  
<
>
column »Skip« and reactivate the channel  
with »oK«.  
3
Move the channel to its new position with  
«, » «, » « or » « and press »oK« to  
confirm.  
»
v
Λ
<
>
-19  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
notes:  
picture-settings-  
7
You can only select the »Mpeg NR« function  
1
Open the menu with »menu«.  
on digital and AV presets.  
2
Select the menu item »PICTURE SETTINGS«  
»Mpeg NR« reduces any interference from  
artefacts (pixel blocks) from digital pro-  
grammes due to MPEG compression (such  
as from DVB-T receivers or DVD players).  
The »Film Mode« detects and processes  
feature films automatically for all channel  
sources. This means you will always receive  
an optimal picture.  
with »  
v« or »Λ« and press »oK« to con-  
firm.  
20.09.2010  
15:46  
7
PICTURE SETTINGS  
Picture Mode  
Brightness  
Contrast  
User  
50  
This functions in the modi 480i, 576i and  
1080i in TV playback and for other channel  
sources.  
100  
If the »Film mode« is switched on for pro-  
grammes without a feature film signal, minor  
problems such as picture freeze, defective  
subtitles or fine lines in the picture could  
occur.  
Sharpness  
Colour  
75  
65  
Colour Temperature  
Medium  
Enhanced picture settings  
7
7
7
7
The function »Dynamic Contrast« adapts the  
contrast dynamically and optimally for the  
respective picture content.  
With »Dynamic Backlight«, the device opti-  
mally adapts the background lighting to the  
picture content.  
The »Backlight« can only be set manually  
when the function »Dynamic Backlight« is  
deactivated.  
»MEMC« (Motion Estimation, Motion Com-  
pensation) provides fluidity for the picture  
in active pictures or fast camera shots.  
»MEMC« will only appear in menus of LCD  
products with 200 Hz PPR Feature and LED  
products with 400 Hz PPR feature.  
DNR  
Off  
Off  
Mpeg NR.  
Exit  
Back  
– The »PICTURE SETTINGS« menu appears.  
3
Select the line »Picture Mode«, »Bright-  
ness«, »Contrast«, »Sharpness«, »Colour«, or  
»Colour Temperature« with »v« or »Λ«.  
Select the value with » « or » « and press  
<
>
»oK« to confirm.  
notes:  
7
When changing the values with » « or  
» «, the screen will be split. You can see  
the current setting on the left side, the new  
setting on the right side.  
<
>
5
Press »menu« to end the setting.  
7
In the »PICTURE SETTINGS« menu you can  
also find other additional settings.  
4
Select the line »DNR«, »Mpeg NR«, »Vibrant  
Colour«, »Perfect Clear«, »Film Mode«,  
»Gamma«, »Dynamic Contrast«, »Dynamic  
Backlight«, »Backlight« or »MEMC« with  
»v« or »Λ«.  
Select the value with » « or » « and press  
<
>
»oK« to confirm.  
-20  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
Automatic-volume  
sound-settings-  
Television stations broadcast at different vol-  
umes. The automatic volume limiting (AVL) func-  
tion means the volume is kept the same when  
you switch between channels.  
1
Open the menu with »menu«.  
2
Select the menu item »SOUND SETTINGS«  
with »  
v« or »Λ« and press »oK« to con-  
firm.  
1
Select the line »AVL« with »  
v« or »Λ« and  
– The »SOUND SETTINGS« menu appears.  
select the option »On« with » « or » «.  
<
>
note:  
note:  
7
Additional operations are explained in the  
following sections.  
7
If the »SRS« setting has been selected in the  
»Audio Mode« line, the AVL line cannot be  
selected.  
20.09.2010  
15:46  
stereo/two-channel-sound,-mono  
If the device receives two-channel-sound pro-  
grammes, e.g. a film with the original soundtrack  
on audio channel B (display: »Dual II«) and  
the dubbed version on sound channel A (dis-  
play: »Dual I«), you can select the audio channel  
you prefer.  
Volume  
Balance  
10  
Sound Type  
Sound Mode  
Stereo  
If the device receives stereo or Nicam pro-  
grammes, it switches automatically to stereo  
sound (display: »Stereo«).  
Sound Preset  
Naturel  
External  
Headphone  
You can switch the sound to »Mono« if the stereo  
sound quality is poor.  
1
Select the line »Audio Type« with »  
v« or  
>
Exit  
Back  
»Λ  
« and adjust the setting with » « or » «.  
<
stereo-width  
This broadens the sound output for stereo pro-  
grammes and improves the sound with mono  
reception.  
volume  
1
Select the line »Volume« with »  
and change the setting with » « or » «.  
v
« or »  
>
Λ
«
«
<
1
Select the line »Audio Mode« with »  
or » «.  
v«  
Λ
Balance  
1
Select the line »Balance« with »  
and change the setting with » « or » «.  
v
« or »  
>
Λ
2
Select the option »Spatial« with » « or » «.  
<
>
<
-21  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
settinGs------------------------------------------------------------------------------------------------------------------------------------------  
soundeffects  
equalizer  
This menu offers three preset sound effects  
(Music, Natural and Speech) and one setting to  
be created by you (User).  
Equalizer offers a sound setting that you can cre-  
ate.  
Equaliser appears in the menu when »Sound  
mode« is selected as »Spatial« or »Normal«,  
and »Sound Preset« as »User«.  
1
Select the line »Sound Preset« with »  
v« or  
»
Λ«.  
1
2
Select »Equalizer« with »v« or »Λ« and  
2
Select the sound effect »Music«, »Natural«  
or »Speech« by pressing » « or » «.  
press »oK« to confirm.  
<
>
The »EQUALIZER« menu appears.  
note:  
note:  
7
»User« option is active when »Sound mode«  
setting is selected as »Normal or »Spatial«.  
7
If the »SRS« setting has been selected in the  
»Sound Mode« line, the »Equalizer« line  
will not indicate.  
srs-trusurround-xt*  
SRS TruSurround XT is a patented audio tech-  
nology which is integrated into the television set  
and only requires the built-in speakers to gener-  
ate a Surround Sound effect.  
Select the frequency bandwidth »120Hz«  
with »v« or »Λ«.  
Set the preferred value with » « or » «.  
<
>
3
4
Set the next frequency bandwidth with »  
or » « and repeat the setting.  
v«  
1
Select the line »Audio Mode« with »  
or » «.  
v
«
Λ
Λ
Press » « to save the setting.  
<
2
3
Select the option »SRS« with » « or » «.  
<
>
Audio-description-(Audio-subtitles)  
Select the line »Sound Preset« with »  
or » «.  
v
«
Audio description is an additional audio channel  
for visually-impaired persons. Descriptions are  
provided of activities, surroundings, changes of  
scene, gestures and actors' facial expressions.  
Λ
4
Select the sound effect »Music«, »Natural«  
or »Speech« with » « or » «.  
<
>
This audio channel is transmitted simultaneously  
with the normal sound on digital channels. Avail-  
ability depends on the respective channel and  
broadcaster.  
1
Select the line »Audio Description« with »  
v
«
or »Λ  
« and select the option »On« with » «  
<
or » «.  
>
2
Select the line »Volume« with »  
v
« or »  
>
Λ
«
and change the volume with » « or » «.  
<
exiting-the-setting  
1
Press »menu« to end the setting.  
* Under licence from SRS Labs, Inc. TruSurround XT,  
SRS and the  
symbol are trademarks of  
SRS Labs, Inc.  
-22  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
television---operAtion--------------------------------------------------------------------------------  
Displaying-information  
Basic-functions  
1- Display information with »?«.  
– The display disappears automatically after  
a short while.  
switching-on-and-off  
1
Press »8«, »1…0« or »p+« or »p-« to switch  
on the television from standby mode.  
Freeze-frame  
2
Press »8« to switch the television to standby.  
If you wish to view a particular scene for longer,  
you can “freeze” the frame of the current pro-  
gramme.  
selecting-channels  
1
Press »1…0« to select presets directly.  
1
2
Activate the freeze-frame function with »$«.  
End the freeze-frame function with »$«.  
note:  
2
Select channels step by step with »p+« or  
»p-«.  
3- Open the channel list with »oK«, select the  
preferred television channel with » «, » «,  
» « or » « and press »oK« to confirm.  
7
v
Λ
If an external data medium is connected  
to the television, the time shift function is  
activated with »$«. The time shift function is  
described on page 29.  
<
>
Exit the channel list with »menu«.  
selecting-channels-from-lists  
You can select channels from various lists (e.g.  
all channels, FAV 1 to FAV 4).  
picture-settings  
Various picture settings are available.  
1
Press »FAv« to open an overview of pro-  
grame tables.  
1
2
Open the Tools menu with »tools«.  
Select the menu item »Picture Mode« with  
– The overview is displayed.  
»v« or »Λ«.  
2
3
4
Select a programe table with »Λ« or »v«  
and open it with »oK«.  
3- Select »User«, »Eco TV«, »Vivid«, »Natural«,  
»Movie«, »Sports« or »Game« by pressing  
» « or » «.  
Select a television channel with »  
v
«, »  
Λ«,  
<
>
» « or » « and press »oK« to confirm.  
<
>
note:  
Press »menu« to exit the programe table.  
7
Picture setting »Game« can only be selected  
in »HDMI«, »Component« and »PC« modes.  
selecting-a-preset-Av-channel  
Audio-settings  
Various audio settings are available.  
1
Open the »Select Source« menu with »  
Select an AV preset with » «, »  
» « and press »oK« to confirm.  
«.  
2
v
Λ«, » « or  
<
>
1
2
Open the Tools menu with »tools«.  
3
Use »1…0« to switch back to the television  
channel.  
Select the menu item »Sound Preset« with  
»v« or »Λ«.  
Adjusting-the-volume  
3
Select the audio setting »User«, »Music«,  
o
»Natural« or »Speech« by pressing » « or  
1
Adjust the volume with »  
«.  
<
- -–  
+
» «.  
>
switching-sound-on/off  
note:  
1
Press » « to mute the sound or switch it  
p
on again.  
7
»User« option is active when »Sound mode«  
setting is selected as »Normal or »Spatial«.  
-23  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
television---operAtion--------------------------------------------------------------------------------  
Audio-language  
electronic-tv-guide  
Various languages are available on digital tele-  
vision channels. This depends on the programme  
being broadcast.  
The electronic TV guide provides an overview of  
all programmes that will be broadcast in the next  
week (for digital channels only).  
1
2
Open the selection menu with »  
«.  
1
Press »GuiDe« to display channel informa-  
tion.  
Select the language by pressing »  
and press »oK« to confirm.  
v« or »Λ«  
notes:  
7
Not all channels supply provide a detailed  
subtitles  
TV guide.  
Various subtitles are available on digital televi-  
sion channels. This depends on the programme  
being broadcast.  
7
Many broadcasters transmit the current  
schedule, but do not offer detailed descrip-  
tions.  
1
2
Open the selection menu with » «.  
7
There are broadcasters which do not pro-  
vide any information at all.  
Select the subtitles with »v« or »Λ« and  
press »oK« to confirm.  
2
3
Press »v« or »Λ« to select a television  
channel.  
Zoom-function  
1
– Today's programmes on the television  
channel selected are displayed.  
– Inaddition,informationaboutthecurrentpro-  
gramme is display with detailed information  
about the channel.  
Open the Tools menu with »tools«.  
2
Select the menu item »Zoom« with »v« or  
»Λ«.  
3- Press- »oK« repeatedly to enlarge the  
Switch to the information about the current  
display in three steps.  
programme with » «.  
>
note:  
eco-mode  
This function allows you to reduce the power  
consumption.  
7
You can open and switch off the extensive  
programme information with »?«.  
1
2
Open the Tools menu with »tools«.  
Select the menu item »Eco TV« with » « or »Λ«.  
4
5
6
Press »  
v
« to select information on the next  
programme and, »  
Λ
« to return to the infor-  
v
mation for the current programme.  
3- Switch on the Eco mode with » « or » «.  
<
>
Select programmes on over the coming days  
4
Switch the Eco mode off again with » « or » «.  
<
>
with » « (green), and switch back to the cur-  
  
rent day with » «-(red).  
Zapping-function  
This function remembers the channel you are  
currently watching while you switch over to other  
ones (zapping).  
Switch back to the channel selection with  
» «.  
<
notes:  
7
By pressing » « (yellow) twice, the pro-  
  
1
Press »1…0« or »p+«, »p–« to select the  
gramme of your choice can be added to the  
memory timer.  
channel to be stored in the zapping memory  
and press » « to confirm.  
<
7
Filter for certain programmes with »  
«
2
3
Press »1…0« or »  
Λ«, »v« to switch to  
  
(blue), select the channel type with » «,  
another television channel.  
<
» «, »v« or »Λ« and press »oK« to con-  
>
Press » « to switch between the saved  
<
firm. Programmes which match the selected  
channel type are displayed.  
television channel and the last television  
channel viewed.4-  
with »menu«.  
End the function  
7- Quit the electronic TV guide with »menu«.  
-24  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
television---operAtion--------------------------------------------------------------------------------  
»Auto«-format  
Changing-the-picture-format  
The picture format is automatically switched to  
»16:9« for 16:9 programmes.  
The television automatically switches to the 16:9  
format if this format is detected via the SCART  
socket.  
The picture format is automatically switched to  
»4:3« for 4:3 programmes.  
1
Select the picture format with » «.  
– The picture format (for example »16:9«) is  
displayed.  
»overscan«-format  
– You can choose between the following  
picture formats:  
In this mode, HD pictures are not cropped by the  
HDMI sockets or component sockets, and are  
displayed in their original size. This only applies  
in HDMI mode and for resolutions of 720p or  
above.  
»4:3«-format  
The picture is shown in 4:3 format.  
»16:9«-and-»14:9«-formats  
For programmes in 4:3 format, the picture is  
stretched horizontally if the »16:9« format or  
»14:9« format is selected.  
The picture geometry is stretched horizontally.  
With actual 16:9 input sources (from a set-top box  
on the SCART socket) the picture fills the screen  
completely and with the correct geometry.  
»subtitle«-format  
If you cannot see the subtitles at the bottom of  
the screen, select »Subtitle«.  
»letterBox«-format-  
The letterbox format is especially suitable for  
programmes in 16:9 format.  
The black borders which are usually at the top  
and bottom of the screen are eliminated, 4:3 pic-  
tures fill the screen.  
The transmitted pictures are enlarged, but are  
slightly cropped at the top and bottom. The pic-  
ture geometry remains unchanged.  
»panorama«-format-  
This setting is suitable for films in an especially  
wide format.  
During programmes in 4:3 format, the picture is  
stretched horizontally if the »Panorama« function  
is selected. The picture geometry is stretched  
horizontally.  
-25  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
possible-limitations-when-using-  
an-external-data-medium  
Depending on the broadcaster, you may experi-  
ence various restrictions on some of the functions  
from some television channels.  
information-on-recording-and-  
playing-television-programmes  
Recording and playback of television pro-  
grammes is only possible with digital television  
channels (DVB-S, DVB-T and DVB-C).  
The digital television channels (DVB-S, DVB-T  
and DVB-C) you are able to record and play-  
back also depends on the broadcaster.  
GrunDiG-has-no-influence-on--  
these-restrictions.  
Recording a programme on the external data  
Recording and playback of programmes,  
medium can be disabled by the broadcaster.  
If the message »URI* protected! PVR function  
is blocked« appears on the screen, then re-  
cording or timeshift is restricted (one recording  
possible) or disabled (recording not possible)  
by the broadcaster.  
as well as the time shift function, can only be  
carried out using an external data medium  
(hard drive or USB stick). The data medium  
should have a minimum storage capacity  
of 2 GB.  
* URI = User right information (Copyright in-  
formation).  
Recordings can be made with most data media  
on the market. However, we cannot guarantee  
operation for all data media.  
If you record and save a programme on the  
archive of an external data medium, playback  
can be restricted.  
The broadcaster can allow you to view this  
programme one or more times, but it may only  
be available for a certain period of time.  
If a programme was recorded on an external  
data medium, it can only be played back on  
your television set. The playback of these pro-  
grammes is not possible on other devices.  
If you send your television to be repaired and  
Programmes not suitable for minors will require  
hardware components need to be replaced,  
you might not be able to play the recordings  
again on the repaired television.  
the input of a PIN number immediately before  
recording starts. If this authorisation is not  
given, the recording may not start.  
Reception for SKY broadcasting service is cur-  
rently only possible in Germany with a suitable  
set-top box.  
Copying a programme from a digital television  
channel onto a video or DVD recorder using  
the »Av- 1« socket (analogue picture/  
sound signal) can also be restricted by the  
broadcaster. Prerequisite is that your device  
supports the copying function.  
-26  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
notes:  
Connecting-external-data-media-  
notes:  
7
The »usB« socket of the television supplies  
a maximum power of 500 mA in accord-  
ance with USB specifications. External hard  
disks which require more power may there-  
fore only be connected to the »usB-hDD«  
of the television.  
7
Before connecting the data medium, switch  
the television to standby with . Connect  
»8«  
the device and then switch the television on  
again.  
7
7
Before removing the external data medium,  
the television must be switched to standby,  
so that no data loss occurs.  
7
If you use a network cable for external hard  
disks which have been connected to the  
»usB- hDD« socket of the television, this  
network cable must also be disconnected  
from the power supply when the television is  
switched off.  
Your television features two USB sockets,  
»usB-hDD« and »usB«.  
»usB-hDD« is used to connect data media,  
which require an additional power supply  
– for example, external hard disks.  
7
External data media may not be disconnect-  
ed from the television while files on the data  
medium are being accessed.  
settings-for-usB-recording  
selecting-the-menu  
1
Open the menu with »menu«.  
2
Select the line »USB RECORDING« with  
»
v« or »Λ« and press »oK« to confirm.  
– The »USB RECORDING« menu appears.  
20.09.2010  
15:46  
USB RECORDING  
PRnP  
Auto Preview  
On  
1
2
Connect the »usB- hDD« socket of the  
television and the corresponding socket of  
the data medium (external hard disk) using  
a USB cable;  
Manage data medium  
Disk  
USB  
Partition  
or  
Check Disk  
Insert the USB plug of the USB memory stick  
into the »usB« socket of the television.  
Capacity Used  
%3  
1249  
Used (MB)  
Total (MB)  
38145  
Remaining SD recording time  
Remaining HD recording time  
1,008 min  
288 min  
Confirm the display »  
(green).  
– The file browser appears.  
« with »  
«
  
Exit  
Back  
-27  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
switching-on-automatic-preview  
testing-the-external-data-medium  
If the automatic preview is switched on, a pre-  
view of the selected file appears in the file  
browser.  
You can subject external data media to a test  
and establish whether they are suitable for the  
chosen functionality.  
1
2
3
Select the line »Auto Preview« with »  
«.  
v« or  
1
2
3
Select the line »Disk« with »v« or »Λ«. If  
»Λ  
several data media are connected, select the  
preferred data medium with » « or » «.  
<
>
« or »  
Switch on the function with » « or » «  
<
>
(»On«).  
Select the line »Partition« with »  
v
Λ«.  
If several partitions are available, select the  
partition you wish to use with » « or » «.  
Press »menu« to end the setting.  
<
>
selecting-external-data-media  
Select the line »Check Disk« with »  
v
« or  
If several external data media are connected to  
the television, you can select the preferred data  
medium.  
»
Λ« and press »oK« to confirm.  
Information on the data medium is dis-  
played.  
1
2
Select the line »Disk« with »  
v
« or »  
Λ
«
4
Press »menu« to end the setting.  
Select the preferred data medium (»USB  
HDD« or »USB«) with » « or » «.  
<
>
3
Press »menu« to end the setting.  
selecting-a-partition-on-the-external-  
data-medium  
If the external data medium features several par-  
titions, select the partition you would like to use.  
1
2
Select the line »Partition« with »v« or »Λ«.  
Select the partition you wish to use with » «  
<
or » «.  
>
3
Press »menu« to end the setting.  
-28  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
″pausing”-time-shift--  
programmes  
You can pause the programme you are watch-  
ing. This is a useful function, for example if the  
telephone rings while you are watching a film  
and you do not want to miss anything.  
recording-programmes  
You can record programmes. The data for these  
programmes is recorded on an external data  
medium and this archive is administered via the  
television.  
The following approximate values apply for re-  
cording:  
Recording time for high-definition programmes  
(HD) is 7 minutes with 1 GB of memory,  
for standard programmes it is 26 minutes.  
A freeze-frame display of the last scene appears  
on the screen and the programme is recorded  
in the time shift memory of the external data  
medium.  
While recording, you can watch another pro-  
gramme from the archive.  
In time shift mode you can record a maximum of  
10 minutes of the current programme.  
You cannot change presets.  
1
Press »!« to pause the current programme.  
– The picture is frozen, the time shift and the  
remaining recording time are displayed.  
one-touch-programme-recording  
1
Select the television channel to be recorded  
2
Press »8« to resume the programme.  
with » »1…0« or »p+«, »p–« and press  
The programme will continue to be  
recorded.  
»
« to start the recording.  
– Information on the recording is displayed:  
the recording symbol, the channel name,  
the programme, the recording time and the  
available memory space.  
note:  
7
The following functions are possible when in  
time shift mode:  
– Rewind, press »3« several times accord-  
ing to speed (the picture freezes while  
rewinding);  
– Fast forward, press »4« several times  
according to speed;  
– Select pause with »!«.  
– After a short time this information disap-  
pears; only the recording symbol flashes  
on the top left of the screen.  
2
End the recording with »7«.  
notes:  
7
After the recording is complete, the record-  
3
Press »7« to quit the time shift function.  
– The message »Live programme« appears,  
and you will see the current programme  
without time shift.  
– The scenes in the “time shift memory” are  
deleted.  
ing will be automatically saved on the exter-  
nal data medium.  
7
The »RECORDED FILES« menu, with the ar-  
chived programmes, can be opened with  
»reC.list«.  
7
If the external data medium is disconnected  
from the USB socket during recording, the  
recording will be stopped automatically  
and will not be saved.  
7
Play your recordings, that you have record-  
ed with your FAT32 formatted HDDs, in USB  
mode.  
-29  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
recording-a-programme-from-the-  
channel-list  
presetting-programmes-to-be-  
recorded  
1
Open the »CHANNEL LIST« with »oK«.  
Select a television channel with » «, »  
» « or » « and press »oK« to confirm.  
...-using-the-electronic-tv-guide  
You can use data from the electronic TV guide  
for recording.  
2
v
Λ«,  
<
>
3
4
Press »menu« to exit the channel list.  
25 programmes can be preset for the timer  
recording or as a reminder.  
Press » « to start recording.  
– Information on the recording is displayed:  
the recording symbol, the channel name,  
the programme, the recording time and the  
available memory space.  
– After a short time this information disap-  
pears; only the recording symbol flashes  
on the bottom right of the screen and the  
recording time is displayed.  
1
Press »GuiDe« to display channel informa-  
tion.  
– The electronic TV guide appears.  
2
3
4
5
Select the preferred channel with »  
v«  
or »Λ«.  
Switch to the information about the current  
programme with » «.  
>
Select the programme of your choice with  
5
Press »7« to stop recording.  
»
v« or »Λ«.  
Confirm the programme with »  
«.  
– The symbol » « appears after the name  
of the programme, and the data has been  
added to the timer.  
note:  
7
If the data for the recording is to be changed,  
use  
»
« (yellow) and  
»
« (blue) to  
  
  
switch to the »SCHEDULED EVENTS«, press  
»
»
«(green),changethedataandsaveitwith  
  
  
« (green)  
.
6
Press »menu« to exit the menu.  
notes:  
7
Before the timer recording begins, a warn-  
ing message appears with a 20-second  
countdown. You can switch over to the pro-  
grammed television channel.  
7
If the timer recording starts during playback,  
playback is not interrupted: Recording takes  
place automatically in the background as  
long as you do not select »Yes« when the  
timer countdown message is shown.  
-30  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
...-by-manual-data-entry  
You can preset up to 25 programmes for timer  
recording.  
editing-recording-data-in-the--  
timer-menu  
You can edit the data for programmed timer  
recordings.  
1
Press »GuiDe« to display channel informa-  
tion.  
– The electronic TV guide appears.  
1
Select the timer menu by pressing »GuiDe«  
   
sion.  
,
»
« (yellow) and « (blue) in succes-  
»
2
3
Open the »MAKE SCHEDULE« menu by  
– The »SCHEDULED EVENTS« menu ap-  
pears.  
pressing » « (yellow) twice.  
  
Select the line »Type« with »v« or »Λ«  
2
3
Select the title of the programme to be  
and select the option »Recording« with » «  
<
changed with »  
v« or »Λ« and activate the  
or » «.  
>
timer position with  
»
« (green).  
  
– The input menu is displayed.  
4
5
Select the line »Channel« with »  
v
« or »  
>
Λ
«
and select the channel with » « or » «.  
<
Select the required option with »  
« and edit the data with »1…0« and  
» « or » «.  
v« or  
»Λ  
Select the line »Mode« with »v« or »Λ« and  
select the preferred mode (»Once«, »Every  
Day« or »Weekly«) with » « or » «.  
<
>
<
>
4- Save the changes with » « (green).  
  
– The timer has been changed.  
6
7
Select the line »Start« (Start recording) with  
« or » « and enter the date/time with  
»1…0«.  
»
v
Λ
5
Press »menu« to close the menu.  
Deleting-a-timer  
You can delete programmed timer recordings.  
Select the line »End« (Stop recording) with  
« or » « and enter the date/time with  
»1…0«.  
»v  
Λ
1
Select the timer menu by pressing »GuiDe«  
   
sion.  
,
»
« (yellow) and « (blue) in succes-  
»
8- Save the data with » « (green).  
  
– The programme is preset.  
– The »SCHEDULED EVENTS« menu ap-  
pears.  
9
Press »menu« to exit the menu.  
notes:  
Before the timer recording begins, a warn-  
2
3
Select the title of the programme to be deleted  
7
with »  
with  
v« or »  
Λ« and delete the timer position  
ing message appears with a 20-second  
countdown. You can switch over to the pro-  
grammed television channel.  
»
« (yellow)  
.
  
Press »menu« to close the menu.  
7
If the timer recording starts during playback,  
playback is not interrupted: recording takes  
place automatically in the background as  
long as you do not select »Yes« when the  
timer countdown message is shown.  
-31  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-reCorDinG---------------------------------------------------------------------------------------------------------------  
playback  
The recorded programmes – whether started  
playback-during-a-recording  
During a recording, you can either watch the  
manually or using the timer function – are stored  
programme you are currently recording or watch  
on the external data medium. You can open the  
a different one that you have already recorded.  
archive on the external data medium by pressing  
1
Select the channel to be recorded with  
»1…0« or »p+«, »p–« and press »  
start the recording.  
»reC.list«.  
« to  
selecting-a-programme-from--  
the-archive  
2
Select the »Recorded Event« menu by press-  
1
Open the »Recorded Event« menu with  
ing »reC.list«. Select the programme you  
»reC.list«  
.
want with »  
start playback.  
The recording continues in the background.  
v« or »Λ« and press »8« to  
– The menu appears.  
2
3
Select the programme of your choice with  
»
v« or »Λ« and start playback with »8«.  
3
4
Press »7« to end playback.  
Press »7« to end playback.  
– The television switches over to the current  
television channel.  
Press »7« to stop recording.  
Deleting-programmes-in-the-  
recording-list  
Forward/reverse-picture-search  
You can delete programmes from the record-  
ing list.  
1
During playback, select the fast forward  
speed (2x, 4x, 8x or 16x) with »4«;  
1
2
Open the »Recorded Event« menu with »reC.  
or  
list«  
.
During playback, select the rewind speed  
(2x, 4x, 8x or 16x) with »3« (the picture  
freezes when rewinding).  
– The menu appears.  
Select the programme to be deleted with  
»
v« or »Λ«.  
repeating-a-scene-(A-B)  
You can mark the starting and ending point of a  
scene. The scene is then repeated continuously.  
3
4
Press »  
« (blue) to delete the programme.  
  
Confirm the security query with  
»
«
  
(green)  
.
1
Mark the starting point A by pressing »8« at  
the required scene during playback.  
note:  
7
You cannot delete programmes in the  
»Recorded Event« menu which are currently  
being recorded or played back.  
This scene is marked as the starting  
point A.  
2
Mark the end point B by pressing »8«  
once again at the required scene during  
playback.  
5
Press »menu« to close the menu.  
– This scene is marked as the end point B.  
– The television repeats the programme be-  
tween these two points.  
3
Quit the repeat function with »7«.  
-32  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
image-data  
File-formats  
Your television can display pictures in the formats  
JPEG, PNG and BMP.  
Your television can work with the following file  
formats using the USB sockets:  
JPEG stands for Joint Picture Experts Group.  
It denotes a process for compressing picture files.  
PNG and BMP are process used to save image  
data with no, or very little, losses.  
Picture files can be stored with other types of files  
on one medium.  
These files can be organised into folders and  
subfolders.  
video-data  
Special codecs for video compression and  
decompression provide more memory space  
without compromising the picture quality exces-  
sively.  
Your television plays video files in the formats  
DIVS, XVID, H.264/MPEG-4 AVC (L4.1, 4 ref-  
erence pictures), MPEG-4, MPEG-2, MPEG-1,  
MJPEG and MOV.  
The following file name extensions are also sup-  
ported: AVI, MKV, MP4, TS, MOV, MPG, DAT.  
These files can also contain audio files com-  
pressed using MP3, AAC or Dolby Digital©.  
Audio-data  
Your television can play audio data in the for-  
mats MP3, AAC, WMA.  
MP3 is the abbreviation for MPEG-1 Level 3 and  
is based on the MPEG-1 standard, which was  
developed by the MPEG (Motion Picture Expert  
Group).  
AAC stands for Advanced Audio Coding and  
was also developed by MPEG. AAC provides  
better sound quality at an identical data rate.  
WMA (Windows Media Audio) is a compres-  
sion standard for audio data developed by  
Microsoft.  
These formats allow audio files to be recorded  
and played which sound as good as a CD, while  
taking up only a fraction of the memory space.  
File name extensions which are supported: MP3,  
MP2, WMA, M4A, AAC.  
MP3 files can be organised into folders and  
subfolders, as on the computer.  
-33  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
Connecting-external--  
data-media-  
Before connecting the data medium, switch the  
television to standby using »8«. Connect the  
device and then switch the television on again.  
Before removing the external data medium,  
the television set must be switched to standby,  
so that no data loss occurs.  
notes:  
7
The »usB« socket of the television set  
supplies a maximum power of 500 mA in  
accordance with USB specifications. Exter-  
nal hard disks which require more power  
may therefore only be connected to the  
»usB-hDD« of the television set.  
7
1
2
Connect the »usB-hDD« socket of the tel-  
evision and the corresponding socket on  
the data device (external hard drive, digital  
camera, card reader or MP3 player) using a  
USB cable;  
If you use a network cable for external  
hard disks which are connected to the  
»usB-hDD« socket on the television, this  
network cable must also be disconnected  
from the power supply when the television  
is switched off.  
or  
7
7
External data media may not be disconnect-  
ed from the television set while files on the  
data medium are being accessed.  
Insert the USB plug of the USB memory stick  
into the »usB« socket of the television set.  
Confirm the display »  
(green)  
– The file browser appears.  
« with  
»
«
  
A bi-directional data transfer as defined for  
ITE (Information Technology Equipment)  
devices in EN 55022/EN 55024 is not  
possible.  
.
7
USB transfer is not in itself an operating  
mode. It is only an additional function.  
-34  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
switching-on-automatic-preview  
If this function is switched on, a preview of the  
selected file then appears in the file browser.  
the-file-browser-  
The file browser displays video, audio and  
picture files stored on external data media.  
1
2
3
Select the line »Auto Preview« with »  
v«  
If an external data medium contains files in  
different formats, you can, when necessary, filter  
out the formats not required.  
or »Λ«.  
Switch on the function with » « or » «  
<
>
(»On«).  
main-menu-of-the-file-browser  
Press »menu« to end the setting.  
4
1
3
selecting-the-display-mode  
1
Select »View Mode« with »v« or »Λ«.  
VIDEO FILES  
2- Select the preferred option with » « or » «.  
<
>
ROOT  
Photo  
Music  
Film  
3
Press »menu« to end the setting.  
setting-the-display-duration-for-  
pictures-in-a-slideshow  
1
Select »Slide Show Interval« with »v« or »Λ«.  
USB DRIVE  
Used (MB)  
Total (MB)  
%3  
475  
45  
2
Selectthedisplayduration(3, 5, 10 seconds)  
with » « or » «.  
Use Control  
Buttons  
x1  
Speed  
All  
Repeat  
Now  
Total  
<
>
3
Press »menu« to end the setting.  
6
2
5
®
Divx -voD  
1
2
3
Selected data format.  
Name of the data medium.  
Total number of folders on the data medium.  
You must have your device registered in order to  
play the protected video that you will buy from  
®
DivX .  
®
1
Select »DivX VOD« with »v« or »Λ« and  
4- Preview of the selected file.  
confirm with »oK«.  
– Registration Code appears.  
5- Information on the external data medium.  
6
Menu navigation.  
2
3
device with the registration code.  
settings-in-the-usB--  
setup-menu  
Press »menu« to end the setting.  
DivX Certified® to play DivX® and DivX  
Plus™ HD (H.264/MKV) video up to  
1080p HD including premium content.  
selecting-the-menu  
1
Open the menu with »menu«.  
2
Select the »SOURCE SETUP« menu item with  
ABOUT DIVX VIDEO: DivX® is a digital video format created  
by DivX, Inc. This is an official DivX Certified® device that plays  
DivX video. Visit divx.com for more information and software  
tools to convert your files into DivX video.  
»v  
« or »  
Λ« and press »oK« to confirm.  
The »USB SETUP« menu appears.  
note:  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® de-  
vice must be registered in order to play purchased DivX Video-  
on-Demand (VOD) movies. To obtain your registration code,  
locate the DivX VOD section in your device USB setup menu.  
Go to vod.divx.com for more information on how to complete  
your registration.  
7
Additional functions are explained in the  
following sections.  
-35  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
note:  
Basic-playback-functions-  
7
When playing picture data, the file browser  
1
Select the data medium by pressing »  
«,  
7
switches off. Press » « to display the file  
use » «, » «, » « or » « to select the option  
v
Λ
<
>
browser again.  
»USB« and press »oK« to confirm.  
– The file browser appears.  
7
Press »!« to pause playback.  
2
3
Select the file format (video files, audio files,  
picture files) with » « or » «.  
8- Press »8« to resume normal playback.  
v
Λ
7
9
Press » « to end playback.  
The file browser appears.  
Switch to the folder/file list with »oK«.  
note:  
notes:  
7
7
If two USB data media or one USB data  
Use »Λ« to select »Up Folder«, when you  
medium with several partitions is connected  
to the USB sockets, the letter for the respec-  
tive drive (e.g. C) appears behind the folder  
symbol. Select the letter of the drive with  
would like to return to the last folder. Use  
»Root« (and then press »oK«) to return to  
the main folder.  
7
It is possible that files which are actually  
supported do not function correctly in USB  
mode. This is because certain files are not  
recorded with standardised compression  
processes, although they feature the “right”  
file ending.  
»v« or »Λ« and press »oK« to confirm.  
4
5
Select the folder or file with »v« or »Λ« and  
press »oK« to open it.  
– A list of subdirectories appears.  
note:  
7
7
7
If a video file features several audio tracks  
(audio streams), you can switch these over  
during playback in full screen mode with »  
«.  
7
Switch back to the main folder with » «.  
<
Select the track or picture with »  
and press »8« to start playing.  
You can view information on the film data by  
pressing »?« (red).  
v« or »Λ«  
When playing music files, you can use other  
options in the USB mode at the same time.  
This way, you can, for example, enhance a  
slideshow with music.  
– When playing MP3 or WMA data, infor-  
mation on the album, track and singer is  
displayed at the left of the menu.  
– When playing picture files, you can use  
»?« to display information about the reso-  
lution and size.  
For films, only subtitles in the SRT format  
are supported. The names of the subtitle  
and film files must be identical. Otherwise,  
no subtitles will be shown.  
– When playing picture data, press »  
?«  
®
twice to enter the DivX Settings menu.  
-36  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
usB-operAtion----------------------------------------------------------------------------------------------------------------  
selecting-a-certain-passage-for-  
playback-  
Additional-playback--  
functions  
Depending on the file format, the following  
additional functions are available:  
(video files only)  
1
2
During playback, press »oK«.  
Enter the passage (time) with »1-...-0« and  
press » « (green) or »oK« to confirm.  
®
selecting-chapters-on-Divx -files  
(only video files)  
  
Fast-forward  
(for video and audio files only)  
You can select different speeds (2-fold, 4-fold,  
8-fold and 16-fold forwards and backwards).  
1
During playback, select the next chapter  
with » «.  
>
2
During playback, select the previous  
chapter with » «.  
<
1
Select the playback speed during playback  
with »3« or »4«.  
note:  
7
You can also select chapters by entering the  
chapter number with »1...0«.  
2- Press »8« to resume normal playback.  
®
selecting-titles-on-Divx -files  
(only video files)  
rotating-pictures-  
(picture files only)  
1
During playback, select the next title with  
«.  
You can rotate pictures by 90°.  
»Λ  
1
During playback, press » « or « to rotate  
the pictures by 90°.  
<
>
2
During playback, select the previous title  
with » «.  
v
repeat-functions  
Options:  
playing-selected-titles  
Only the marked tracks are played.  
– »One Repeat«: the current track will be  
repeated.  
– »All Repeat«: all tracks will be repeated.  
1
Select the titles with »  
»oK« to mark it.  
v« or »  
Λ« and press  
1
2
Open the Tools menu with »tools«.  
2
Select the next title with »  
v
« or » « and  
Λ
press »oK« to mark it.  
Select the menu item »Repeat« with »  
v« or  
»Λ«.  
3
4
Start playback with »8«.  
3- Select »All«, »Random«, »One« or »None«  
7
Press » « to end playback.  
by pressing » « or » «.  
<
>
note:  
7
To remove the marking, select the title with  
« or » « and press »oK« to remove the  
marking.  
»v  
Λ
selecting-a-track-or-picture-in-steps-  
(sKip)  
1
During playback, select the next track/  
picture with »6«.  
2
During playback, select the previous track/  
picture with »5«.  
– Playback begins with the track or picture  
you selected.  
-37  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
teletext-operAtion-----------------------------------------------------------------------------------------------  
enlarging-the-character-height  
If you have difficulty reading the text on the  
screen, you can increase the character height.  
top-text-or-FloF-text-mode  
1
Press »txt« to switch on teletext.  
2
Select teletext pages directly with »1...0«  
1
To enlarge the character height of a teletext  
page, keep pressing »5«.  
or step by step with »v« and »Λ«.  
Return to teletext page 100 with »?«.  
note:  
page-hold  
7
At the bottom of the screen there is an info  
A multiple page may contain several sub-pages,  
which are automatically scrolled by the broad-  
casting station.  
bar with red, green and – depending on the  
channel – yellow and blue panels. Similarly,  
the remote control also features buttons with  
different colours with which these pages can  
be selected.  
1
Stop the automatic scrolling of the sub-pages  
with »3«.  
2- Quit the function with »3«.  
3
4
5
Go back a page with » «-(red).  
Go to the next page with » « (green).  
  
opening-a-sub-page-directly  
Select a particular chapter with  
»
«
  
If the selected teletext page contains additional  
pages, the number of the current sub-page and  
the total number of pages are displayed.  
(yellow)  
.
6- Select a particular subject with »  
« (blue).  
  
1- Press » « to open the sub-page function.  
2- Use »0…9« to enter the sub-page.  
3- Quit the function with » «.  
7
Quit teletext with »txt«.  
normal-text-mode  
1
Press »txt« to switch on teletext.  
revealing-answers  
Certain teletext pages contain hidden answers  
or information.  
2
Press »1…0« to select teletext pages directly.  
Return to teletext page 100 with »?«.  
3
4
5
Go back a page with »v«.  
1
Display information with »4«.  
Go to the next page with »Λ«.  
2- Press »4« to conceal the information.  
Quit teletext with »txt«.  
split-screen  
Additional-functions  
This functions allows you to display the televi-  
sion channel on the left side, the teletext on the  
right side.  
skipping-the-waiting-time  
While a page search is progressing, you can  
switch to the TV programme.  
1
Switch the function on with »7«.  
– The television channel and teletext are dis-  
played next to each other.  
1
Enter the teletext page number with »1…0«  
and then press »6«.  
2
Switch the function off with »7«.  
– As soon as the page is found, the page  
number is displayed.  
2
Press »6« to switch to the teletext page.  
-38  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
Changing-the-audio-language  
(only for digital television channels)  
opening-the-settinGs-menu  
1
Open the menu with »menu«.  
You can define a primary and a secondary  
audio language.  
2
Select the »SETTINGS« menu with »v« or  
»
Λ« and press »oK« to confirm.  
– The »SETTINGS« menu appears.  
1
Select the line »Audio« with »v« or »Λ« and  
press »oK« to confirm.  
The »Select Audio Language« menu  
20.09.2010  
15:46  
appears.  
SETTINGS  
2
Select the audio language with » «, » «,  
<
>
»v« or »  
Λ« and then use » «-(red) to set  
Language settings  
it as the primary audio language, or use  
»
« (green) to set it as the secondary audio  
  
Menu  
English  
English  
language.  
Audio  
Subtitle  
– The primary and secondary language is  
display at the top right in the menu.  
English  
Off  
Subtitle Mode  
Date and time settings  
3
Press »menu« to end the setting.  
Changing-the-subtitle-language-  
and-subtitle-mode  
(only for digital television channels)  
Date & Time  
Time Adjustment  
Time Zone  
Auto  
GMT +1  
You can switch the subtitles on and off, select the  
subtitle language and allocate a second subtitle  
language.  
Exit  
Back  
1
Select the line »Subtitle« with »v« or »Λ«  
note:  
and press »oK« to confirm.  
– The »Select Subtitle Language« menu ap-  
pears.  
7
Additional operations are explained in the  
following sections.  
2
Select the subtitle language with »  
v«,  
language-settings  
»Λ«, » « or » «, then use » «-(red) to set  
<
>
it as the primary subtitle language, or use  
  
Changing-the-menu-language  
»
« (green) to set it as the secondary subti-  
1
Select the line »menu« with »  
v« or »Λ«  
tle language.  
and press »oK« to confirm.  
– The primary and secondary language is  
displayed at the top right in the menu.  
The »Select Menu Language« menu  
appears.  
3
4
To go back one menu level, press » «.  
<
2- Select the menu language with » «, » «,  
<
>
Select the line »Subtitle Mode« with »v« or  
»v« or »Λ« and press »oK« to confirm.  
»
Λ« and then set the preferred option »Off«,  
3
Press »menu« to finish the setting.  
»Hard of Hearing« or »Basic« with » « or  
<
» «.  
>
5
Press »menu« to end the setting.  
-39  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
setting-the-date-and-time  
timer-settings  
Your television set detects the difference in time  
to Greenwich Mean Time (GMT) automatically,  
as long as the channel selected transmits a time  
signal. You can also set the difference in time  
manually – for example, when the correct time  
is not detected automatically or does not corre-  
spond to local time for other reasons.  
entering-the-switch-off-time--  
(sleep-timer)  
In the »Sleep Timer« menu you can enter a time  
for the television to switch off. After this time  
has elapsed, the television switches to standby  
mode.  
1
Select the line »Sleep Timer« with »  
»Λ«.  
v« or  
1
Select the line »Time Adjustment« with »v«,  
then select the option »Manual« with » «  
<
2
Enter the switch-off time with » « or » «.  
or » «.  
<
>
>
– The lines »Time Zone« and »Daylight Sav-  
ing« are active.  
note:  
7
To switch off the function, use » « or » « to  
<
>
set the switch-off time to »Off«.  
2
Select the line »Time Zone« with »v« and  
press »oK« to confirm.  
3
Press »menu« to end the set-up.  
– The »Select Time Zone« menu appears.  
switch-on-timer  
3- Select the appropriate time zone with » » «,  
<
In the »Auto On« menu you can enter a switch-on  
time for the television. After the preset time has  
elapsed, the television switches on from standby  
– at the preselected volume and the preselected  
television channel.  
» «, »v  
« or »  
Select the line »Daylight Saving« with »  
and use » « or » « to set the option »Auto«,  
Λ
and press »oK« to confirm.  
>
4
5
v«  
<
>
»Off« or »On«.  
Press »menu« to finish the setting.  
note:  
1
Select the line »Auto On« with  
and press »oK« to confirm  
»
v
« or »  
Λ«  
.
7
If the option »Auto« is selected in the line  
2
Select the line »Mode« with  
»
v
« or » and  
Λ«  
»Time Adjustment«, the television set auto-  
matically adapts the time to the time signal  
from the respective broadcaster. However,  
different channels may also use time bases  
which are different to those of your country;  
e.g. foreign broadcasters. In these cases,  
reminders and planned recordings may be  
annulled due to the time difference.  
use » « or » « to select when the television  
<
>
should switch on.  
3
4
Select the line »Input Source« with  
»v« or »Λ«  
and use » « or » « to select the input source.  
<
>
Select the line »Service Type« with  
»v« or »Λ«  
and use » « or » « to select the preferred op-  
<
>
tion (ATV, DTV, Radio or DATA).  
Select the line »Channel« with  
5
»v« or »Λ«  
and use » « or » « to select the preferred  
<
>
channel.  
note:  
7
The line »Channel« is only active when the in-  
put signal currently in use has been set. If no  
entry has been made, then the first channel of  
the selected input source will be used.  
-40  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
6
Select the line »Volume« with  
»
v
« or »  
Λ
«
and  
parental-control-settings  
Authorising-programmes  
There are films which may be wholly or partially  
unsuitable for children.  
use » « or » « to set the volume.  
<
>
7
Select the line »Set Hour« with  
»
v« or »Λ«  
and enter the time with »1…0«.  
8- Save the data with » « (green).  
  
These programmes contain information which  
marks the content or scenes with access levels of  
4 to 18. You can select one of the access levels,  
thereby authorising playback.  
note:  
7
You can abort the entry by pressing » «-(red)  
.
9
Press »menu« to end the setting.  
1
Select the line »Parental Guidance« with  
« or » « and press »oK« to confirm.  
switch-off-timer  
»v  
Λ
In the »Auto Off« menu, you can enter a time  
for the television to switch off. After this time has  
elapsed, the television switches to standby mode.  
2
3
4
Enter the PIN code »1234« with »1-...-0«.  
Select the access level with » « or » «.  
<
>
Press »menu« to end the setting.  
1
2
3
Select the line »Auto Off« with  
»
v
« or »  
Λ«  
and press »oK« to confirm  
.
note:  
7
Select the line »Mode« with  
»
v
« or » and  
Λ«  
Parental Guidance is not enabled at USB  
source.  
use » « or » « to set the preferred mode.  
<
>
Select the line »Set Hour« with  
»v« or »Λ«  
locking-menus  
and enter the time with »1…0«.  
This function allows you to lock the »Automatic  
Channel Search«, »Digital Manual Tuning«, »An-  
tenna Settings« and »Program Table« menus so  
that they can be only accessed by entering a  
PIN code.  
4- Save the data with » « (green).  
  
note:  
7
You can abort the entry by pressing » «-  
(red).  
1
2
3
4
Select »Menu Lock« with »v« or »Λ«.  
5
Press »menu« to end the setting.  
Enter the PIN code »1234« with »1-...-0«.  
Automatic-switch-off-(Auto-sleep)  
Activate the lock with » « or » « (»On«).  
<
>
If this function is activated, the television switches  
automatically to standby after 5 minutes if no  
video signal is broadcast or in accordance with  
the according to European regulations, the tel-  
evision switches automatically to standby after 4  
hours provided that none of the buttons on the  
remote control or on the television is operated  
during this period.  
Press »menu« to end the setting.  
locking-keys-(parental-lock)  
When the key lock is activated, the buttons on  
the television set do not function.  
1
Select the line »Keypad Lock« with »  
«.  
v« or  
»Λ  
1
Select the line »Auto Sleep« with »  
v« or  
2
Enter the PIN code »1234« with »1-...-0«.  
»Λ«.  
3- Activate (On) or deactivate (Off) the key lock  
2
Activate the function with » « or » «  
<
>
with » « or » «.  
<
>
(»On«).  
4
Press »menu« to end the setting.  
note:  
7
To switch off the function, use » « or » « to  
<
>
select the setting »Off«.  
3
Press »menu« to end the setting.  
-41  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConvenienCe-FunCtions-------------------------------------------------------------------------  
Changing-the-pin-code  
updating-software  
You can also enter a personal PIN code instead  
of the default code »1234«. Please take note of  
your own PIN code.  
(for digital channels only)  
1
In the »SETTINGS« menu, select the line  
»Check For Updates updates« with » « or  
« and press »oK« to confirm.  
v
1
2
3
4
5
Select »Set PIN« with »v« or »Λ« and press  
»Λ  
»oK« to confirm.  
– A search for new software will be made  
and – if available – it will be installed.  
Enter the current PIN code 1 2 3 4 with  
»1-...-0«.  
note:  
7
If a search for software updates should be  
Enter your new four digit PIN code with  
»1-...-0«.  
made automatically, select the line »Auto-  
matic OAD« with »v« or »Λ« and use » «  
<
Enter your new four digit PIN code with  
»1-...-0« again.  
or » « to select the option »On«.  
>
– The software will be updated automati-  
cally as far as possible.  
Press »menu« to end the setting.  
2
Press »menu« to end the setting.  
locking-television-channels-  
You can lock individual television channels, for  
example channels unsuitable for children, using  
a personal PIN code.  
restoring-the-television-to-the-  
default-settings  
This function allows you to delete the channel  
lists and all custom settings.  
1
2
Open the menu with »menu«.  
Select the »SOURCE SETUP« menu with »  
or »Λ« and press »oK« to confirm.  
v«  
1
2
3
In the »SETTINGS« menu, select the line  
»Restore Factory Defaults« with »v« or »Λ«  
3
Select the line »Program Table« with »  
v« or  
and press »oK« to confirm.  
»Λ« and press »oK« to confirm.  
Press » « (green) to confirm the warning  
  
– The »PROGRAM TABLE« menu is dis-  
played.  
message.  
– The »Source Setup« menu appears.  
4
5
6
7
In the »PROGRAM TABLE« menu, switch  
Continue the settings with the chapter “Initial  
set-up and tuning television channels” on  
page 14.  
over to the list view with » « (yellow).  
  
Select the channel to be locked with »  
v«  
or »Λ«.  
Select the column »Lock« with » « or » «  
<
>
and press »oK« to lock the channel.  
Enter the PIN code »1234« with »1-...-0«.  
– The channel is marked using »«.  
note:  
7
To remove the lock, select the channel again  
with »v« or »Λ«, press »oK« to confirm  
and then enter the PIN code 1 2 3 4 using  
»1-...-0«.  
-42  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
searching-for-and-activating--  
external-devices  
You can connect up to 11 devices with DIGI LINK  
functions to your television.  
DiGi-linK  
Your television is equipped with  
the DIGI LINK function.  
This function uses the CEC  
(Consumer Electronics Control)  
protocol.  
1
Open the CEC device list with »CeC«.  
– The »HDMI CEC Device List« appears.  
CEC allows external devices which are connect-  
ed to the »hDmi« sockets by an HDMI cable  
(e.g. DVD player) to be operated with a remote  
control.  
Prerequisite is that the devices connected support  
CEC. Read the operating manual for the external  
device to find out how to activate the correspond-  
ing function.  
2
Start the device search with » «-(red).  
The devices found are displayed in the  
menu.  
3- Select the device for operation with »  
v«,  
»
Λ
«, » « or » « and press »oK« to mark it.  
<
>
– If the selected device is connected to a  
different input to the current one, a switch  
to the respective input will occur auto-  
matically.  
the-DiGi-linK-functions-on-your-  
television  
4
Press »menu« to end the setting.  
switching-on-the-television--  
automatically-from-standby  
If the »Autom. switch-on TV« function is activated  
(»On«), then once the external device (e.g.  
DVD player) is switched on, the television also  
switches on and the appropriate HDMI preset is  
selected.  
Automatic-selection-of-the-hDmi-  
preset-on-the-television  
If your television is switched on and you then  
switch on the external device (e.g. DVD player),  
the appropriate HDMI preset on the television  
will be selected.  
selecting-the-menu-language  
The television menu language is automatically  
selected on the external device (e.g. DVD player).  
The external device must support this function.  
switching-off-the-external-device-  
automatically  
If you switch your television to standby, the ex-  
ternal device (if it is switched on) will also be  
switched to standby.  
DIGI LINK is always active on your television set.  
-43  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
switching-the-device-to-standby  
This option switches the external device to  
standby.  
Device-operation  
You can decide whether external devices should  
react to your television's remote control.  
1
Press »  
«, use »v«, »Λ«, » « or » « to  
1
Press »  
«, use »v«, »Λ«, » « or » « to  
<
>
<
>
select the preset »HDMI1« to »HDMI4« and  
press »oK« to confirm.  
select the preset »HDMI1« to »HDMI4« and  
press »oK« to confirm.  
2
3
Open the menu with »menu«.  
2
3
Open the menu with »menu«.  
Select the menu item »SOURCE SETUP« with  
Select the menu item »SOURCE SETUP« with  
»
v« or »Λ« and press »oK« to confirm.  
»
v« or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
– The »SOURCE SETUP« menu appears.  
4
Select »Device Standby« with »v« or »Λ«  
20.09.2010  
15:46  
and press »oK« to confirm.  
SOURCE SETUP  
– The external device switches itself off.  
Source  
HDMI1  
DIGILINK  
GRUNDIG DVD  
RC Passthrough  
Device Selection  
Remote Control  
Device Standby  
Exit  
Back  
4
Select the line »Remote Control« with »  
or » «.  
v«  
Λ
5- Select the type of operation (»RC Pass-  
through«, »Deck« or »Tuner« with » « or  
<
» «.  
>
notes:  
7
»RC Passthrough« can be used for all devices.  
»Deck« and »Tuner« can be selected in ac-  
cordance with the external device which  
has been connected.  
7
Try out which type of remote control opera-  
tion the external device reacts to the best.  
7
Read about the scope of functions of the  
DIGILINK-compatible device in the respec-  
tive operating manual.  
6
Press »menu« to end the setting.  
-44  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
high-definition--hD-ready  
Connection-options  
7
Which television socket(s) you connect your  
Connect the cor-  
external devices to depends on the sockets  
the external device is equipped with and the  
signals which are available.  
responding input  
sources (e.g. HDTV  
receiver or HD-  
DVD player) to the  
»hDmi« sockets (for  
digital HDTV sources).  
7
Please note: With many external devices,  
the resolution of the video signal must be  
adjusted to the input sockets of the television  
(see the operating manual of the external  
device). You can find out which values you  
need to set by referring to the guidelines in  
the sections about the various connection  
options.  
This ensures that you can view digital HDTV  
programmes, even if they are copy-protected  
(HDCP High Bandwidth Digital Content Protec-  
tion), without encountering problems.  
7
Do not connect any other equipment while  
the device is switched on. Also switch off the  
other equipment before connecting it.  
7
Do not plug in the power cord of the device  
until you have connected the external equip-  
ment and the antenna.  
-45  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
...-using-the-sCArt-socket--  
(FBAs/rGB-signal)  
Connecting-external-devices  
...-with-digital-audio/video-signals  
7
Suitable devices: Digital satellite receiver,  
7
Suitable devices: Digital satellite receivers,  
DVD player/recorder, set-top box, games con-  
sole, video recorder, decoder.  
Video signal: FBAS/RGB.  
Audio signal: stereo, analogue.  
»AV1« preset.  
Playstation, BluRay player, DVD player/  
recorder, set-top box, notebook, PCs.  
Video signal: Digital video; resolution: stand-  
7
7
7
ard 576p; HDTV 720p, 1080i, 1080p.  
Audio signal: digital audio (stereo, multi-chan-  
7
7
1
Connect the »Av1« socket on the television and  
the corresponding socket on the external device  
using a SCART cable (video and audio signal).  
nel compression, uncompressed).  
Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or  
7
»HDMI 4«  
1
Connect  
the »hDmi1«, »hDmi2«,  
Activating-a-decoder  
»hDmi3« or »hDmi4« socket on the televi-  
sion and the corresponding HDMI socket on  
the external device using a standard HDMI  
cable (digital video and audio signal).  
If a decoder is connected to the »Av1« socket,  
this must be activated to provide an unencrypted  
video/audio signal.  
1
2
Open the menu with »menu«.  
...-with-analogue-video-signal-  
(progressive)  
Select »SETTINGS« with »v« or »Λ« and  
press »oK« to confirm.  
– The »SETTINGS« menu appears.  
7
Suitable devices: DVD recorders/players,  
games consoles.  
Video signal: YUV; resolution: standard 576p;  
HDTV 720p, 1080i, 1080p.  
Audio signal: stereo, analogue.  
3
4
Select the »Decoder« with »  
v« or »Λ«.  
7
Activate the function with » « or » «  
(»On«).  
Press »menu« to end the setting.  
<
>
7
5
7
»YPBPR« preset.  
1
2
Connect the »Component- Y- pb- pr«  
sockets on the television to the correspond-  
ing sockets of the external device with RCA  
cables (video signal).  
...-with-s-video-signal  
7
Suitable devices: DVD player/recorder, video  
recorder, camera recorder, notebook, PC.  
Video signal: Y/C.  
Audio signal: stereo, analogue.  
»S-VHS« preset.  
7
7
7
Connect the »Component-l-r« sockets  
on the television to the corresponding sock-  
ets of the external device with RCA cables  
(audio signal).  
1- Connect the »s-vhs« socket on the televi-  
sion and the corresponding socket on the ex-  
ternal device using an S-Video cable (video  
signal).  
2
Connect the »l--r« sockets on the television  
to the corresponding sockets of the external  
device with RCA cables (audio signal).  
-46  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
4
5
Set the preferred volume with » « and » «.  
...-with-an-analogue-tv-signal  
<
>
7
Suitable devices: Digital satellite receiver,  
Press »menu« to end the setting.  
DVD player/recorder, set-top box, camera  
recorder.  
Video signal: FBAS.  
Audio signal: stereo, analogue.  
»AV2« preset.  
note:  
7
Prolonged listening with headphones at loud  
volumes can damage your hearing.  
7
7
7
hi-fi-system/Av-receiver  
1
2
Connect the »video« socket on the television  
to the corresponding socket of the external  
device with an RCA cable (video signal).  
Connecting-the-hi-fi-system/-  
Av-receiver  
1- Connect the »optical-out« socket on the  
television to the corresponding socket of the  
device with an optical digital cable (digital  
audio signal);  
Connect the »l--r« sockets on the television  
to the corresponding sockets of the external  
device with RCA cables (audio signal).  
note:  
or  
7
There must not be a video signal at the  
» video« and »s-vhs« socket at the same  
time. This could lead to picture disturbances.  
connect the »spDiF« socket on the television  
to the corresponding socket of the AV receiv-  
er with an RCA cable (digital audio signal).  
using-a-DvD-player,-  
DvD--recorder,-video-recorder--  
or-set-top-box  
setting-the-audio-format  
You can select whether the audio signal out-  
put via the »optical-out« or »spDiF« socket  
should be in the PCM or AC2 format.  
1
Switch on the external device and select the  
function you wish to use.  
1
2
Open the menu with »menu«.  
2
Press  
»
«, use »v«, »Λ«, » « or » « to  
<
>
Select the menu item »SOUND SETTINGS«  
select the preset for the input signal (»AV1«,  
»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,  
»HDMI3«, »HDMI4« or »Component«)  
and press »oK« to confirm.  
with »  
firm.  
v« or »Λ« and press »oK« to con-  
– The »SOUND SETTINGS« menu appears.  
3
Select »Audio Output Setup« with » « or  
v
»
Λ« and press »oK« to confirm.  
headphones  
– The menu appears.  
Connecting-the-headphones  
4
5
Select the »SPDIF output« with »v« or »Λ«.  
1
Plug the headphone jack (3.5 mm ø jack  
plug) into the headphone socket on the right  
side of the television.  
Select the preferred audio format (»PCM« or  
»Dolby* D«) with » « or » «.  
<
>
note:  
Changing-the-headphone-volume  
7
If you wish to output the audio only via a  
multi-channel amplifier/AV receiver, set the  
option »TV Speaker« to »Off« in the menu.  
1
Open the menu with »menu«.  
2
Select the menu item »SOUND SETTINGS«  
with »  
v« or »Λ« and press »oK« to con-  
6
Press »menu« to end the setting.  
firm.  
– The »SOUND SETTINGS« menu ap-  
pears.  
3
Select the line »Headphone« with »  
v« or  
»Λ«.  
-47  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-usinG-externAl-DeviCes------------------------------  
playing-the-audio-signal-via-the--  
hiFi-system  
1- Connect the »AuDio-out-l-r« sockets on  
the television to the corresponding socket of  
the AV receiver with an RCA cable (digital  
audio signal).  
note:  
7
If this function is not activated, the audio sig-  
nal is transmitted to the HiFi system/AV re-  
ceiver (connected to »AuDio-out-l-r«).  
1
2
Open the menu with »menu«.  
Select the menu item »SOUND SETTINGS«  
with »  
v« or »Λ« and press »oK« to con-  
firm.  
– The »SOUND SETTINGS« menu appears.  
Select »Audio Output Setup« with » « or  
3
4
5
v
»Λ« and press »oK« to confirm.  
– The menu appears.  
Select the line »Audio Out« with »v« or »Λ«  
and press » « or » « to activate the audio  
<
>
output (»On«).  
Select the line » Audio Out Status« with »  
or » « and select the option »Fixed« or »Ad-  
justable« with » « or » «.  
v«  
Λ
<
>
notes:  
7
If you select »Adjustable«, the volume can  
be changed in the menu option » Audio Out  
Volume«.  
7
If the audio should only be output via the  
HiFi system/AV receiver, select the option  
»Off« in the line »TV Speaker with » « or  
<
» «.  
>
6
Press »menu« to end the setting.  
* “Dolby” and the double-D logo are trademarks of  
Dolby Laboratories.  
Manufactured under licence from Dolby Laborato-  
ries.  
-48  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-As-A-pC-monitor-----------------------------------------------------------  
Connecting-a-pC  
20.09.2010  
15:46  
1
Connect the »pC-in« socket on the television  
to the corresponding socket on the PC using  
a VGA cable (video signal).  
SOURCE SETUP  
2
Connect the »pC-Audio« socket on the tel-  
evision to the corresponding socket on the  
PC using a suitable cable (audio signal).  
Source  
PC  
Auto Ajust  
Extended settings  
note:  
Auto Ajust Mode  
On  
50H - 50V  
0
7
Adjust your PC to the monitor (for example,  
picture resolution 1280 x 768, picture fre-  
quency 60 Hz).  
Position  
Size  
Phase  
30  
selecting-presets-for-the-pC  
1
Press »  
« and use »v«, »Λ«, » « or » «  
<
>
Exit  
to select the preset »PC« and press »oK« to  
confirm.  
Back  
Options:  
settings-for-pC-mode  
»Auto Ajust« for automatic PC configura-  
tion.  
1
Open the menu with »menu«.  
– »Auto Ajust Mode«, select the option  
»On« if the configuration should be imple-  
mented automatically in PC mode.  
– »Position« to configure the horizontal and  
vertical picture position.  
– »Size« to set the cycle frequency.  
– »Phase« to eliminate flicker, unfocused  
pictures or horizontal interference.  
2
Select the »SOURCE SETUP« menu item with  
»
v« or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
3- Select the function or setting with » « or  
«, and then use » «, » « or » «, » « to  
implement it.  
v
»
Λ
v
Λ
<
>
4
Press »menu« to end the setting.  
-49  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
operAtion-with-A-Common-interFACe-------------------  
what-is-a-Common-interface?  
Access-control-for-Ci-module-and-  
smart-card  
7
Common Interface (CI) is an interface for  
DVB receivers.  
Encrypted channels can only be viewed  
1
Open the menu with »menu«.  
7
2
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v«  
with a CA module suitable for the encryp-  
tion system and in conjunction with the  
corresponding smart card.  
The television set is equipped with a Com-  
mon Interface slot into which CI modules  
from various providers can be inserted.  
You can insert the provider’s smart card into  
the CA module in order to enable the en-  
crypted channels you wish to view.  
– The »SOURCE SETUP« menu appears.  
Select the line »CA-Module« with » « or  
« and press »oK« to confirm.  
7
3
v
»
Λ
notes:  
7
7
This menu provides operating instructions  
and – after you enter your PIN code – ac-  
cess to the PAY-TV provider's channels.  
inserting-the-CA-module  
note:  
7
7
The remaining settings are described in the  
operating manuals for your CI module and  
smart card.  
7
Switch the device off before you insert a CA  
module into the »Ci« slot.  
CAM is not supported in certain countries  
and regions; please consult your authorised  
dealer.  
1
2
Insert the corresponding smart card into the  
CI module.  
Insert the CI module with the smart card into  
the »Ci« slot on the television.  
4
Press »menu« to end the setting.  
note:  
7
In the »CA Module« sub-menu you can see  
which CA module has been inserted in the  
CI slot.  
7
If you are inserting a CA module into the  
CI slot of the television for the first time,  
you will need to wait a moment until the  
CA module is detected.  
-50  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
7
Select the line »Scan Mode« with »  
«.  
Select the scan mode with » « or » «  
(for unencrypted channels, for encrypted  
channels only, or both).  
v« or  
searching-for-digital-television-  
channels-from-a-satellite-auto-  
matically  
»Λ  
<
>
Satellite data changes frequently, new chan-  
nels are constantly being added. You should  
therefore perform an automatic search from time  
to time.  
8
Select the line »Service Type« with »  
«.  
Use » « or » « to select whether you  
v« or  
»Λ  
<
>
This searches all transponders for new channels.  
want to search for television channels (TV)  
only, radio stations only (Radio) or both  
(Radio + TV).  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP« with »v«  
or »Λ« and press »oK« to confirm.  
9
Select the line »Network Search« with »  
or » «.  
Select the option »On« with » « or » «  
– If the »Network Search« is set to »On«,  
the data will be accessed via the new  
transponder of the network which has  
been set.  
v«  
– The »SOURCE SETUP« menu appears.  
Λ
<
>
20.09.2010  
15:46  
SOURCE SETUP  
Source  
Satellite  
10 Start the scan with » «-(red).  
Automatic Channel Search  
Digital Manual Tuning  
Antenna Settings  
note:  
7
If the previously stored channels should be  
retained in the channel list and the new  
channels found be added to it, then press  
Program Table  
»
« (green).  
  
Signal Information  
If » «-(red) is pressed, the saved channels  
CA -Module  
will be deleted from the current channel list.  
Positioner settings  
– The »Results« menu appears, and the scan  
for TV channels begins.  
Off  
DiSEqC 1.2  
– Depending on the number of television  
channels received, this can easily take a  
few minutes.  
Exit  
Back  
– The search is complete as soon as the  
»PROGRAM TABLE« appears.  
3
4
Select the line »Source« with »v« or »Λ«  
and press »oK« to confirm.  
Select the input source »Satellite« with » «,  
note:  
<
» «, »  
v
« or »  
Λ
« and press »oK« to con-  
7
>
You can abort the search by pressing  
»menu«.  
firm.  
Select the line »Automatic Channel Search«  
11 Press »menu« to end the setting.  
with »  
v« or »Λ« and press »oK« to con-  
firm.  
– The menu appears.  
5
6
Select the line »Select Satellites« with »v« or  
»
Λ« and press »oK« to confirm.  
– The »SELECT SATELLITE« menu appears.  
Select a satellite with »v« or »Λ« and press  
»oK« to confirm.  
-51  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
searching-for-digital-television--  
channels-from-a-satellite-auto-  
matically  
If you know the parameters of a new television  
channel, you can also search for it manually.  
Current transponder data can be found in the  
teletext, in satellite TV magazines or on the  
Internet.  
lnB-settings  
1
Open the menu with »menu«.  
2
Select the line »SOURCE SETUP« with »  
v
«
«
or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
3
4
Select »Antenna Settings« with »v« or »  
Λ
and press »oK« to confirm.  
– The »ANTENNA SETTINGS« menu ap-  
pears.  
1
2
Open the menu with »menu«.  
Select the line required for the parameters  
with »v« or »Λ«.  
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v«  
– »Satellite«: »Press oK«, select a satellite  
with » «, » «, » « or » « and press  
– The »SOURCE SETUP« menu appears.  
Select »Digital Manual Tuning « with » « or  
« and press »oK« to confirm.  
– The menu appears.  
Select the line required for the parameters  
with » « or » «.  
v
Λ
<
>
3
4
v
»oK« to confirm.  
– »Transponder«: »Press oK«, select a tran-  
»Λ  
sponder with » «, » «, »v« or »Λ« and  
<
>
press »oK« to confirm. Use » «-(red) to  
add a transponder, use » « (green) to  
v
Λ
  
delete it, or use » « (yellow) to change  
– »Frequency (MHz)«: Enter the five-digit  
frequency with »1-...-0« .  
  
transponder data.  
– »LNB Power«: Set the LNB power supply  
(depending on the type of LNB) to »Off«  
»13/18 V« or »14/19 V« with » « or » «.  
– »Symbol Rate (kS/s)«: Enter the five-digit  
symbol rate with »1-...-0« .  
– »Polarization«: Use » « or » « to set the  
<
>
<
<
>
polarisation to »Horizontal« or »Vertical«.  
– »Network Search«: use » « or » « to se-  
– »LNB Type«: Select a type of LNB with » «  
or » «. Use » « (green) to save the set-  
<
>
  
>
lect the option »On« or »Off«.  
– »Scan Mode«: Use » « or » « to select  
ting, or use » «-(red) to abort.  
<
>
– »22 KHz«: Depending on the LNB type,  
22 kHz audio is selected. For a universal  
LNB, this option is set to »Auto« and cannot  
be changed.  
whether you want to search for unencrypt-  
ed (Unencrypted) channels only, encrypt-  
ed (Encrypted) channels only, or for both  
(Unencrypted + Encrypted).  
– »DISEqC mode« and »LNB selection«:  
depending on the type of antenna used,  
use » « or » « select the option »Off«,  
– »Service Type«: Use » « or » « to select  
<
>
whether you want to search for television  
channels only (TV), radio stations only  
(Radio), or both (Radio + TV).  
<
>
»DiSEqC 1.0« or »DiSEqC 1.1«.  
»Off«: for a satellite system with only  
one antenna.  
5
6
Start the scan with » «-(red).  
– The »Results« menu appears, and the scan  
for TV channels begins.  
»DiSEqC 1.0«: allows up to four satel-  
lites to be received simultaneously.  
Under »LNB selection«, use » « or  
<
note:  
» « to select the option »1/4«, »2/4«,  
>
7
You can abort the search by pressing  
»menu«.  
»3/4« or »4/4«.  
»DiSEqC 1.1«: allows up to 16 satel-  
lites to be received simultaneously.  
Press »menu« to end the setting.  
Under »LNB selection«, use » « or  
<
» « to select the option »1/16« to  
>
»16/16«.  
5
Press »menu« to end the setting.  
-52  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
user-mode  
settings-for-motorised-antennas-  
(DiseqC-1.2)  
Your television set supports motorised satellite  
systems in compliance with DiSEqC 1.2. This  
function allows the satellite antenna to be oper-  
ated via the television set.  
You can adjust the alignment of the satellite an-  
tenna to each individual satellite. These settings  
will be saved so that the antenna can later be  
easily guided to each saved alignment.  
1
Select the line »User mode« with »  
v
«
or » « and press »oK« to confirm.  
Λ
1
2
Open the menu with »menu«.  
– The »USER MODE« menu appears.  
Select the line »SOURCE SETUP« with »  
v«  
2
Select the preferred option with  
»v«  
or »Λ« and press »oK« to confirm.  
or »  
– »Satellite«: »Press oK«, select a satellite  
with » «, » «, » « or » « and press  
Λ«.  
– The »SOURCE SETUP« menu appears.  
3
Select the line »DiSEqC 1.2« with »  
v
«
v
Λ
<
>
or »  
Λ«. Select the option »On« with » «  
<
»oK« to confirm.  
or » «  
>
– »Transponder«: »Press oK«, select the  
– The line »User Mode« is active.  
transponder from which the signal is being  
note:  
received with » «, » «, »v« or »Λ« and  
<
>
7
Additional operations are explained in the  
following sections.  
press »oK« to confirm.  
– »Moving Mode«: Use » « or » « to select  
<
>
the option »Discrete« or »Continuous«.  
– »Discrete«: Moves the antenna in defined  
steps to the west and the east.  
– »Continuous«: Moves the antenna to the  
west or east continuously.  
– »Step Size«: Use » « or » « to select the  
<
>
number of steps with which the antenna  
should turn. »Step Size« is only active  
when the »Transport Mode« was set to  
»Discrete«.  
– »Move Motor«: Aligns the antenna with  
the selected satellite. Use » « to align it to  
<
»West«, use » « to align it to »East«.  
>
– »Go To Stored Position«: Aligns the antenna  
to a saved satellite position. Up to 50 posi-  
tions can be saved. »Press oK« and then  
select the saved position with » « or » «.  
Press » « (green) to confirm – the anten-  
na will be aligned with the saved position.  
<
>
  
– »Store Stored Position«: The current anten-  
na alignment is saved.  
3
Press »menu« to end the setting.  
-53  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
expert-mode  
You can restrict the antenna's range or reset  
the antenna.  
searching-for-television-chan-  
nels-from-the-cable-provider-  
automatically  
1
Select the line »Installer Mode« with »  
« and press »oK« to confirm.  
– The »INSTALLER MODE« menu appears.  
v
« or  
1
Open the menu with »menu«.  
»Λ  
2
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v
«
«
– The »SOURCE SETUP« menu appears.  
Select the line »Source« with  
or » « and press »oK« to confirm.  
Select the option »Cable« with » «, » «,  
2
Select the preferred option with  
or » «.  
»v«  
Λ
3
4
5
»
v
– »Limit Position«: Defines the range in  
Λ
which the antenna may move. Use » «  
<
<
>
to set the western limit, use » « to set the  
>
»v  
« or »  
Λ« and press »oK« to confirm.  
eastern limit.  
Select the line »Automatic Channel Scan«  
– »Move Motor«: Aligns the antenna with  
with »  
firm.  
v« or »Λ« and press »oK« to con-  
the selected satellite. Use » « to align the  
<
antenna to »west«, use » « to align the  
>
– The menu appears.  
antenna to »east«.  
Select the line »Country« with »v« or »Λ«  
– »Go To Stored Position«: Press »oK« to  
save the current antenna alignment.  
– »Store Stored Position«: Aligns the antenna  
with the reference point of the positioner.  
– »Reset DiSEqC 1.2 Limit«: Resets the limit  
position of the antenna.  
and press »oK« to confirm. In the country se-  
lection menu, select the country with » «, » «,  
<
>
»v  
« or »  
Λ
« and press »oK« to confirm.  
6
7
Select the line »Scan Typ« with »  
v
« or »  
Λ
«
and set the option »DTV« with » « or » «.  
<
>
Select the line »Cable Scan Type« with »  
or »  
with » « or » «.  
v«  
Λ« and set the option »Quick« or »Full«  
<
>
– The search function »Quick« sets the chan-  
nels according to the information provided  
by your cable provide in the transmission  
signal.  
– If the option »Full« is selected, the entire fre-  
quency range will be scanned. The search  
can take a long time with this option. This  
option is recommended if your cable pro-  
vider does not support the search type  
»Quick«  
.
note:  
7
You can accelerate the search. To do this,  
you need information about the frequency  
and network ID. You are usually able to get  
this data from your cable operator or find it  
in forums on the Internet. For example, the  
frequency 402MHz and network ID 61441  
can be entered for Germany.  
-54  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
8
Start the scan with » «-(red).  
– All channel and favourites lists will be  
deleted and compiled anew.  
searching-for-digital-terrestrial-  
tv-channels-automatically  
1
Open the menu with »menu«.  
note:  
2
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v
«
«
7
After starting the scan, a security query will  
appear. Press » « (green) to confirm the  
  
– The »SOURCE SETUP« menu appears.  
Select the line »Source« with  
or » « and press »oK« to confirm.  
Select the option »Air« with » «, » «, »  
option »Yes«.  
3
»
v
– The »Results« menu appears, and the scan  
for TV channels begins. Depending on the  
number of television channels received,  
this can easily take a few minutes.  
Λ
v« or  
<
>
»
Λ« and press »oK« to confirm.  
– The scan is complete as soon as the »PRO-  
GRAM TABLE« appears.  
Caution:  
7
The antenna power supply (line »Active  
Antenna Power«) may only be switched on  
if the antenna is an active indoor antenna  
with a signal amplifier and it is not already  
supplied with a voltage via a mains plug  
(or similar supply). Otherwise you may  
cause a short circuit and irreparably dam-  
age your antenna.  
note:  
7
You can abort the search by pressing  
»menu«.  
9
Press »menu« to end the setting.  
searching-for-television-channels-  
from-the-cable-provider-manu-  
ally  
4
5
Select the »Active Antenna Power« with »  
or » «. Switch on the antenna power supply  
for the antenna with » « or » « (»On«).  
v«  
Λ
1
Open the menu with »menu«.  
<
>
2
Select the line »SOURCE SETUP« with »  
v
«
«
Select the line »Automatic Channel Search«  
or »Λ« and press »oK« to confirm.  
with »  
firm.  
v« or »Λ« and press »oK« to con-  
– The »SOURCE SETUP« menu appears.  
– The menu appears.  
3
Select the line »Source« with »v« or »  
Λ
and press »oK« to confirm.  
6
Select the line »Country« with »v« or »Λ«  
Select the option »Cable« with » «, » «,  
and press »oK« to confirm. In the country  
<
>
»v  
« or »  
Λ
« and press »oK« to confirm.  
selection menu, select the country with » «,  
<
» «, »  
v
« or »  
Select the line »Scan Typ« with »  
and set the option »DTV« with » « or » «.  
Λ
« and press »oK« to confirm.  
>
4
5
Select » Digital Manual Tuning« with »  
v« or  
7
8
v« or »Λ«  
»Λ  
« and press »oK« to confirm.  
– The menu appears.  
<
>
Start the scan with » «-(red).  
– All channel and favourites lists will be  
deleted and compiled anew.  
Enter the four-digit frequency with »1-...-0«  
and press »oK« to confirm.  
The search starts after confirming, the  
channels found are displayed in the »Re-  
sults« menu.  
note:  
7
After starting the scan, a security query will  
6
Press »menu« to finish the setting.  
appear. Press » « (green) to confirm the  
  
option »Yes«.  
– The »Reults« menu appears, and the scan  
for TV channels begins. Depending on the  
number of television channels received,  
this can easily take a few minutes.  
– The scan is complete as soon as the  
-55  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
»PROGRAM TABLE« appears.  
tuning-analogue-television-  
note:  
-channels  
7
You can abort the search by pressing  
»menu«.  
This setting is only necessary if you cannot re-  
ceive any digital channels and you have not car-  
ried out an analogue search during initial setup.  
The television channels can be set directly or  
using the scan.  
9
Press »menu« to end the setting.  
searching-for-digital-terrestrial-  
tv-channels-manually  
switching-the-television-to-  
-analogue-reception  
1
Open the menu with »menu«.  
2
Select the line »SOURCE SETUP« with »  
v
«
«
note:  
or »Λ« and press »oK« to confirm.  
7
Analogue channels can be selected if the  
option »Air« or »Cable« has been selected.  
– The »SOURCE SETUP« menu appears.  
3
Select the line »Source« with »v« or »  
Λ
1
2
Open the »Select input source« menu with »  
«.  
and press »oK« to confirm.  
Select the option »Air« with » «, » «, »v« or  
<
>
Depending on the antenna system, select the  
»
Λ« and press »oK« to confirm.  
option »Air« or »Cable« with »v«, »Λ«, » «  
<
or » « as the input source and press »oK«  
Caution:  
>
to confirm.  
7
The antenna power supply (line »Active  
Antenna Power«) may only be switched on  
if the antenna is an active indoor antenna  
with a signal amplifier and it is not already  
supplied with a voltage via a mains plug  
(or similar supply). Otherwise you may  
cause a short circuit and irreparably dam-  
age your antenna.  
note:  
7
Additional operations are explained in the  
following sections.  
setting-all-analogue-television-  
channels  
Analogue channels are displayed in the channel  
list after the digital channels.  
4
5
6
Select the »Active Antenna Power«« with »  
or » «. Switch on the antenna power supply  
for the antenna with » « or » « (»On«).  
v«  
Λ
note:  
<
>
7
Plug the rooftop antennacable (for analogue  
Select » Digital Manual Tuning« with »  
« and press »oK« to confirm.  
– The menu appears.  
v« or  
television channels) into the »Ant-in«  
socket on the television.  
»Λ  
1
2
Open the menu with »menu«.  
Enter the channel number directly with  
1-...-0« and press »oK« to confirm.  
Select the line »SOURCE SETUP« with »  
v
«
«
»
or »Λ« and press »oK« to confirm.  
–After the search is complete, the channels  
found are displayed in the »Results« menu.  
– The »SOURCE SETUP« menu appears.  
3
4
Select the line »Source« with »v« or »  
Λ
7
Press »menu« to finish the setting.  
and press »oK« to confirm.  
Select the option »Air« or »Cable« with » «,  
<
» «, »  
v« or »Λ  
« and press »oK« to con-  
>
firm.  
Select the line »Automatic Channel Search«  
with »  
firm.  
v« or »Λ« and press »oK« to con-  
-56  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
20.09.2010  
15:46  
tuning-the-television-channels-by-  
entering-the-channel-numbers  
SOURECE SETUP  
1
Open the menu with »menu«.  
Source  
Cabel  
2
Select the line »SOURCE SETUP« with »  
v«  
Automativ Channel Search  
Digital Manual Tuning  
Analogue Manual Tuning  
Program Table  
or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
3
4
Select the line » Analogue Manual Tuning«  
with »  
firm.  
v« or »Λ« and press »oK« to con-  
Signal Information  
CA - Modul  
– The menu appears.  
Select the line »Program No« by pressing  
»
v« or »Λ« and use » « or » « to save the  
<
>
INSTALLATION  
ANALOGUE MANUAL TUNING  
Beenden  
Zurück  
Program No  
TSystem  
Band  
1
BG  
C
5
Select the line »Country« with »v« or »Λ«  
and press »oK« to confirm. In the country  
selection menu, select the country with » «,  
<
Channel  
2
» «, »  
v
« or »  
Select the line »Scan Typ« with »  
and set the option »ATV« with » « or » «.  
Λ
« and press »oK« to confirm.  
>
Fine Tuning  
0
6
7
v« or »Λ«  
48.25 MHz  
<
>
Start the scan with » «-(red).  
Auto Previous  
Auto Next  
Store  
note:  
7
After starting the scan, a security query will  
preset.  
appear. Press » « (green) to confirm the  
  
option »Yes«.  
5
6
Select »Band« by pressing »  
v« or »Λ« and  
– All channel and favourites lists for the ana-  
logue channels will be deleted and com-  
piled anew.  
use »» « or » « to choose between »S«  
<
>
(special channel) or »C« (normal channel).  
Select the line »Channel« with » « or »  
v
Λ«  
– The »Results« menu appears, and the scan  
for TV channels begins. Depending on the  
number of television channels received,  
this can easily take a few minutes.  
– The search is complete as soon as the »PRO-  
GRAM TABLE« appears.  
and enter the channel number with » « or  
<
» « step by step, or use »1…0« to enter it  
>
directly.  
notes:  
7
The current system is displayed in the  
»System« line. If the colour or sound is  
not functioning properly, select the line  
»System« with »  
to select the preferred setting.  
note:  
7
You can abort the search by pressing  
»menu«.  
v« or »  
Λ
«. Use » « or » «  
<
>
8
Press »menu« to end the setting.  
-57  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
7
If fine tuning is necessary, select the line  
Changing-stored-analogue-  
»Fine Tuning« with »  
v« or »Λ« and use » «  
<
-channels  
or » « to make the setting.  
>
If channels were stored with the automatic chan-  
nel search while tuning the television channels,  
you can delete them. You can also store chan-  
nels in a different preset, change or enter the  
name of a channel as well as skip channels.  
7
Press »  
« (blue) to save the setting.  
  
note:  
7
If you wish to remedy other television  
channels, repeat steps 4 to 8.  
8- Press »menu« to end the setting.  
selecting-a-channel-list  
note:  
7
Analogue channels can be selected if the  
option »Air« or »Cable« has been selected.  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP« with »  
v«  
or »Λ« and press »oK« to confirm.  
– The »SOURCE SETUP« menu appears.  
3
Select the line »Program Table« with » « or  
v
»
Λ« and press »oK« to confirm.  
– The »PROGRAME TABLE« menu appears.  
note:  
7
Additional operations are explained in the  
following sections.  
Deleting-channels  
1
In the »PROGRAME TABLE« menu, select the  
television channel to be deleted with «,  
«, » « or » « and press » «-(red) to con-  
»v  
»
Λ
firm.  
<
>
2
Press » « (yellow) to confirm the deletion  
process.  
  
note:  
7
»
« (blue) allows all television channels  
  
to be deleted.  
3
Press » « (green) to confirm the deletion  
  
process.  
-58  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
speCiAl-settinGs-----------------------------------------------------------------------------------------------------------  
entering-channel-names-(8-digit-  
maximum)  
Creating-lists-of-favourites  
You can select your favourite channels and  
save them in up to four favourites lists (Fav 1 to  
Fav 4).  
1
In the »PROGRAME TABLE« menu, select the  
television channel with » «, » «, » « or  
» « and press » «-(red) to confirm.  
v
Λ
<
>
1
2
3
In the »PROGRAME TABLE« menu, switch  
over to the list view with » « (yellow).  
  
2
3
Mark the television channel with »  
(green).  
«
  
Select the preferred channel with »  
or »Λ«.  
v«  
Select the digits or letters with »Λ« or »v  
«
and use » « or » « for the next position, and  
Use » « or » « to ”push“ the channel into  
<
>
<
>
repeat the entry.  
one of the favourites lists 1 to 4 and press  
»oK« to confirm.  
4
Save the channel name with » « (green).  
  
– The position in the favourites list is marked  
with »«.  
– You can enter the same channel in more  
than one favourite list.  
note:  
7
If you wish to enter other channel names,  
repeat steps 1 to 4.  
– Each favourite list can store up to  
255 channels.  
skipping-television-channels  
You can highlight television channels to be  
skipped when you select with »Λ« or »v«.  
Selection is still possible using the number  
buttons.  
note:  
7
Channels can also be deleted from favour-  
ites lists. Select the channel to be deleted  
with »  
v«, »Λ«, » « or » « and delete it with  
<
>
1
2
3
In the »PROGRAMETABLE« menu, switch over  
»oK«.  
to the list view with » « (yellow).  
  
exiting-the-settings  
Select the preferred channel with »  
or »Λ«.  
v«  
1
Press »menu« to end the setting.  
Select the column »Skip« with » « or » «  
<
>
and use »oK« to mark the channel.  
– The channel is marked using »«.  
note:  
7
Channels can also be reactivated. Select the  
channel with »v« or »Λ«, then select the  
column »Skip« and reactivate the channel  
with »oK«.  
-59  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
Displaying-signal-information  
(for digital channels only)  
1
2
Open the menu with »menu«.  
Select the line »SOURCE SETUP« with »  
or »Λ« and press »oK« to confirm.  
v«  
3
Select the line »Signal Information« with  
« or » « and press »oK« to confirm.  
»v  
Λ
– Information on the channel, network,  
modulation, symbol rate, quality and  
signal strength is displayed.  
notes:  
7
The signal information changes in accord-  
ance with the current input source.  
7
The signal properties are displayed in the  
lower section of the menu. The further the  
bars for »Quality« and »Signal Strenght«  
extend to the right, the better the reception  
signal.  
7
The signal level not only depends on your  
receiver system, but also on the channel  
which is currently active. Remember this  
when aligning your antenna based upon  
the signal level display.  
4
Press »menu« to close the menu.  
-60  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
Constellation: 16QAM, 64QAM, QPSK  
GrunDiG-hAmBurG-32-vlC-8140-s  
Analogue-reception-ranges:  
technical-data  
C02 ... C80, special channels S01 ... S41  
operating-voltage:-  
preset-channels:-  
220–240 V, , 50–60 Hz  
~
TV/Radio  
6000 (Satellite – DVB-S),  
1000 (Cable – DVB-C) or  
100 (Analogue)  
power-consumption:  
Operational 83 W  
Standby <1,0 W  
1000 (Terrestrial – DVB-T) or  
100 (Analogue)  
9 AV, 2 USB  
energy-efficiency-class:  
C
screen-(dm²):  
28  
maximum-power-consumption:  
Operational 145 W  
screen-size:  
80 cm/32 inch  
Annual-power-consumption:  
121 kWh  
maximum-resolution:  
WUXGA, 1920 x 1080  
Audio-output:-  
2 x 20 W music power output  
2 x 10 Sine wave power  
weight:  
approx. 11 kg  
rohs-limits: Pb (Lead)/Hg (Mercury)  
Pb meets ROHS directive / 56 mg  
maße:  
W H D 78,9 cm 51,8 cm 8,1 cm  
peak-luminance-ratio:  
% 65  
Default-satellite:  
20  
lnB-power-supply:  
13/18 V, 14/19 V optional, maximum 450 mA  
lnB-switching-signal:  
0/22 kHz 650mV +/- 250mVpp  
DiseqC:  
1.0-operation, 1.1-operation, 1.2-operation  
Digital-reception-ranges:  
satellite:  
Ku band:  
10,700 MHz – 12,750 MHz  
Modulation: DVBS QPSK, DVBS2 QPSK,  
8 PSK  
IF band:  
Signal level: -25dBm to -65 dBm  
950 MHz – 2,150 MHz  
Cable:  
Overall band: 110 MHz – 862 MHz  
Modulation:  
16QAM, 32QAM, 64QAM,  
128QAM and 256QAM  
Symbol rate: 4.0 Msym/s to 7.0 Msym/s  
terrestrial:  
VHF/UHF band, Bandwidth 7 MHz  
and 8 MHz  
COFDM modi: 2k and 8k  
Technical changes and errors reserved.  
-61  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
service-information-for-retailers  
Only operate the television  
with the power supply/power  
cord provided.  
The product complies with the  
following EU directives:  
2006/95/EC directive on electrical equipment  
for use within certain voltage limits.  
2004/108/EC directive on electromagnetic  
compatibility.  
2009/125/EC directive on ecodesign require-  
ments for energy-related products.  
environmental-note  
This product has been made  
from high-quality parts and  
materials which can be re-used  
and recycled.  
Therefore, do not dispose of the product along  
with normal household waste at the end of its  
service life. Take it to a collection point for the  
recycling of electrical and electronic equipment.  
Dispose of the used device at a collection point  
for electrical and electronic equipment. The sym-  
bol on the product, in the operating manual or  
on the packaging indicates that recycling is pos-  
sible.  
Information on collection points is available from  
your local authorities.  
Help protect the environment by recycling used  
products.  
note:  
7
This is a Class A product. During operation  
the device could cause radio interference.  
In this case the user may have to remedy  
this. Please contact your specialist dealer.  
-62  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
inFormAtion----------------------------------------------------------------------------------------------------------------------  
troubleshooting  
If the information provided below does not help, please consult an authorised GRUNDIG dealer.  
Please bear in mind that malfunctions can also be caused by external devices such as video recorders  
or satellite receivers.  
problem  
possible-cause  
remedy  
Screen lit (snow), but no station  
visible  
Antenna cable  
Is the antenna cable connected?  
No TV channel tuned  
Start a channel scan  
Insufficient contrast in picture  
The picture settings are not correct  
Adjust the brightness, contrast or colour  
setting  
Problem at station  
Try another channel  
Picture and/or sound distorted  
Ghosting, reflection  
Interference from other devices  
Place the device in a different position  
Channel setting  
Antenna  
Automatic or manual tuning/fine tuning  
Have antenna cable or system checked  
Turn up the colour  
No colour  
Colour intensity too low  
Adjust TV standard (if setting option is  
available)  
Select the correct colour standard  
Problem at station  
Try a different channel  
Picture but no sound  
Volume is set to a minimum  
Turn up or switch on the volume  
Teletext impaired or absent  
Problem at station  
Try a different channel  
Television channel (no teletext)  
or antenna system  
Try with a different TV channel,  
carry out fine tuning  
Station signal too weak  
Check antenna  
The remote control does  
not work  
Obstacle between remote control and  
device.  
Point remote control at television  
Battery problem  
Check batteries and replace if  
necessary  
Operating mode undefined  
Switch off the television at the mains  
switch for two minutes  
Picture too dark in PC mode  
Incorrect setting for picture resolution  
and picture frequency on the PC  
Change settings on the PC  
(e.g. 1280 x 768 resolution,  
refresh rate 60 Hz)  
-63  
ENGLISH  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Dust Collector G0548 User Manual
Grizzly Saw G0524 User Manual
Harrison Labs Music Mixer V202 User Manual
Hotpoint Cordless Telephone DDP 700 User Manual
Huawei Cell Phone M865 User Manual
Hubbell Electric Heater Company Water Heater EMV User Manual
Hunter Fan Outdoor Ceiling Fan 20177 User Manual
Hyundai Flat Panel Television E260D User Manual
IBM Laptop 04P4963 User Manual
Image Home Gym IMTL139050 User Manual