PRODUCT INFORMATION
MFT table connector
Item No. 484 455 (pack of 1)
2 are needed to connect 2 tables together
PRODUCT DESCRIPTION:
The MFT table connector can be used to connect
2 or more Multi-Function Tables to get a larger
work surface. These strong metal bars with 4 set
screws slide into the “T” track spanning the tables
to be joined as shown below.
SUGGESTED USAGE:
For big jobs where a large surface with very versatile
clamping options is needed. MFT’s can also be joined
together and be used with a long guide rail
(e.g. FS 1900/2) to increase the cutting
capacity of the MFT.
BENEFITS:
• Large work surface that supports big work
pieces – secure working environment can
enhance working speed and results.
• Increases cutting capacity of single MFT’s and
makes them more versatile – better use of
existing equipment
• Sturdy construction and high quality materials –
long product lifetime saves on replacement costs.
The MFT connectors (on
the outside) are thicker
than the guide rail
connectors
The MFT connectors fit the
“T” slots around the
perimeter of the MFT
RELATED PRODUCTS:
• MFT 1080 (item no. 492 652): Large, strong,
sturdy and portable work table for shop-level
precision on the jobsite.
• MFT 800 (item no. 492 651): Smaller version of
the MFT 1080, but with all of the same features.
• Replacement top (item no. 489 396 for MFT
1080; item no. 486 565 for MFT 800)
Two 1080 MFT’s joined
together side by side to
form a large work surface
Two 1080 MFT’s joined
together end to end to
form a long work surface
AVAILABLE THROUGH:
Your Festool dealer, or
Festool USA/Tooltechnic Systems, LLC
140 Los Carneros Way, Goleta, CA 93117
Phone: 888.337.8600 • Fax: 888.550.6425
Download from Www.Somanuals.com. All Manuals Search And Download.
|