User Manual
Model: ET-AR504LR-BK
2.1 Soundstage Speakers with Subwoofer
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Product Overview
16
15
13
14
12
11
TRE+
1
TRE-
RESET
MUTE
17
18
AUDIO INPUT
BASS+
MAST+
2
3
4
5
6
8
9
BASS-
MAST-
AUDIO OUTPUT
10
7
POWER SOURCE
19
1. Status LED
7. Power cord
14. Bass-
Displays Volume, Treble, Bass, EQ
Connects to 110V AC outlet
Decreases bass level
2. Menu
8. Audio input 1
15. Tre+
Switches functions: Volume, Treble or
Auxiliary 3.5mm plug
Increases treble level
Bass
9. Audio input2
16. Tre-
3. Up arrow
Standard RCA plug
Decreases treble level
Increases volume or adjusts selected
10. Power switch
17. Reset
menu function
Turns speakers on/oꢀ
Resets Bass and Treble settings to
factory default
4. Down arrow
11. Mast+
Decrease volume or adjusts selected
Increases master volume
18. Mute
menu function
Turns on/oꢀ master volume
12. Mast-
5. Left arrow
Decreases master volume
19. Battery compartment
Selects previous menu function
Insert battery with letter facing up
13. Bass+
6. Right arrow
Increases bass level
Selects next menu function
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Product Setup
1. Connect the 3.5mm end of audio cable
to your music device.
2. Connect the RCA end of audio cable
to back of the system. Only one
audio input may be used at a
time.
AUDIO INPUT
1
2
OR
3. Connect the power cord to an
110V AC outlet.
AUDIO OUTPUT
4. Turnonthe powerand slowly
increase the volume until reaching
acomfortable level.
POWER SOURCE
4
3
5. Adjust treble or bass as needed.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Understanding LCD Display
1. Mute Indicator
Indicates if the system mute has been
turned on or oꢀ
6. Treble Adjustment Indicator
Indicates if the system is being set to
Treble Adjustment Mode
Mute
CD
Volume
Treble
Bass
1
2
3
4
5
6
7
8
AUX
2. CD Input Indicator
(models with CD input)
7. Bass Adjustment Indicator
Indicates if the system is being set to
Bass Adjustment Mode
Indicates if the system is currently
using the CD input
8. Subwoofer Indicator
3. Auxiliary Input Indicator
(models with Aux input)
Indicates if subwoofer is in use
Indicates if the system is currently
using the Aux input
4. Power On Indicator
Indicates if the system is turned
on or oꢀ
SUB WOOFER
5. Volume Indicator
Indicates if the system is being set to
Volume Adjustment Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using Front Panel Controls
(Volume • Bass • Treble • Equalizer)
1. The LCD area displays your current selection.
2. Press the Menu button until you have selected your desired
function. Press the Up or Down arrow to change the setting
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Using the wireless Remote
Adjusting Volume/Mute using Remote Control
1. Press Mast+ button to increase volume level and Mast- button to decrease volume level.
2. Press Mute to turn on/off master volume. Press again to resume previous volume level.
Adjusting Treble/Bass using Remote Control
1. Press Tre+ button to increase bass level and Tre- button to decrease bass level.
2. Press Bass+ button to increase volume level and Bass- button to decrease volume level.
Resetting EQ Levels using Remote Control
1. Press Reset button to reset all EQ levels to factory default.
TRE+
TRE+
TRE+
TRE-
TRE-
TRE-
RESET
MUTE
RESET
MUTE
RESET
MUTE
BASS+
MAST+
BASS+
MAST+
SS+
ST+
BASS-
AST-
-
MAST-
M
Adjusting Volume/Mute using Remote Control
Adjusting Treble/Bass using Remote Control
Resetting EQ Levels using Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Optimum Settings
1. For best reception, always point the remote control at the LCD display area. The re-
mote control’s effective range is approximately 10ft.
2. For best tonal fidelity, we recommend setting your audio source to line level output and
use the speaker to control overall volume level.
3. For best tonal fidelity, we recommend using the default EQ levels so you hear the music
at exactly the same way it was recorded. The easiest way to do this is by pressing the
Reset button located on the remote control.
4. This speaker system is most efficient when the volume level is set between 30% to 80%.
You get highest sound quality and minimum distortion within these volume levels.
5. Place the satellite speakers at least 16 inches from each other. This enhances stereo
sound effect and perceived sound field.
6. Provide ample space around the subwoofer unit. It needs enough room to move massive
amount of air! To further enhance lower frequencies, place the subwoofer unit near walls.
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Specification
• Total RMS Power:
35 Watts
-Satellites:
10 Watts RMS x 2
(into 4 ohms, @ <=1% THD)
15 Watts RMS x 1
(into 4 ohms, @ <=1% THD)
70 Watts
-Subwoofer:
• Total Peak Power:
• Frequency Response:
20Hz to 20kHz
• Drivers:
-Satellites:
Dual 3-inch midrange and
1-inch tweeter with solid wood enclosure
5.25-inch drivers with solid wood enclosure
-Subwoofer:
• Speaker Dimension
(H x W x D):
-Satellites:
4.33” x 9.65” x 4.77”
6.7” x 11.03” x 10.25”
-Subwoofer:
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Regulatory Compliance
FCC Class B Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. However, there is no guarantee that interference will not occur in a
particular installation.
CE Compliance for Europe
This equipment has been tested and found to comply with the limits for European Council Directive on the
approximation of the law of the member states relating to electromagnetic compatibility (89/336/EEC) ac-
cording to EN55022 Class B.
11. Limited Warranty
Eagle Tech warrants that the product, in the course of its normal use, will be free from defects in material
and workmanship for a period of one (1) year. This limited warranty period shall commence on the pur-
chase date appearing on your purchase receipt. Eagle Tech shall have no liability for any product returned
if Eagle Tech determines that the product was not purchased from authorized retailers, that the asserted
defect a) is not present, b) cannot reasonably be rectified because of damage occurring before Eagle Tech
receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing
or obliterating labels and opening or removing parts. The foregoing warranty shall extend to repaired or
replaced products for the remaining of the applicable period of the original warranty or ninety (90) days
from the date of shipment of a repaired or replaced product, whichever is longer.
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Contacting Us
Customer Service
FAQ
RMA
Eagle Tech Computers, Inc.
17531 Railroad St. Ste D
City of Industry, CA 91748
USA
Phone: 626.956.4040
Fax: 626.810.4820
© 2008 Eagle Tech Computers, Inc. All rights reserved. Eagle Tech, the Eagle Tech logo and other Eagle
Tech marks are owned by Eagle Tech and may be registered. All other trademarks are the property of their
respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
Eagle Tech Computers, Inc.
Phone: 626.956.4040
Fax: 626.810.4820
Download from Www.Somanuals.com. All Manuals Search And Download.
|