|
7VM400AM-RZ
AMD Athlon™/Athlon™ XP/Duron™ Socket A Processor Motherboard
User's Manual
Rev. 1003
12ME-VM400AMRZ-1003
Copyright
© 2005 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in
any from without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherboard.
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make
a commitment to update the information contained herein.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing Your Computer
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips.
To protect them against damage from static electricity, you should follow some precautions when-
ever you work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do not have one,
touch both of your hands to a safely grounded object or to a metal object, such as the
power supply case.
3. Hold components by the edges and try not touch the IC chips, leads or connectors, or
other components.
4. Place components on a grounded antistatic pad or on the bag that came with the compo-
nents whenever the components are separated from the system.
5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX
power connector on the motherboard.
Installing the motherboard to the chassis
If the motherboard has mounting holes, but they don't line up with the holes on the base and
there are no slots to attach the spacers, do not become alarmed you can still attach the spacers to
the mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to
cut off, so be careful of your hands). In this way you can still attach the motherboard to the base
without worrying about short circuits. Sometimes you may need to use the plastic springs to iso-
late the screw from the motherboard PCB surface, because the circuit wire may be near by the
hole. Be careful, don't let the screw contact any printed circuit write or parts on the PCB that are
near the fixing hole, otherwise it may damage the board or cause board malfunctioning.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 1 Introduction ................................................................................................. 5
Features Summary ................................................................................................................. 5
7VM400AM-RZ Motherboard Layout...................................................................................... 7
Block Diagram ........................................................................................................................ 8
Hardware Installation Process ................................................................................................ 9
Step 1: Set System Jumper (JP1) .......................................................................................... 9
Step 2: Install the Central Processing Unit (CPU) ............................................................... 10
Step 2-1: CPU Installation ......................................................................................................... 10
Step 2-2: CPU Cooling Fan Installation .................................................................................... 10
Step 3: Install Memory Modules ........................................................................................... 11
Step 4: Install AGP Card ....................................................................................................... 12
Step 5: Install I/O Peripherals Cables .................................................................................. 12
Step 5-1: I/O Back Panel Introduction ....................................................................................... 12
Step 5-2: Connectors Introduction ............................................................................................. 13
Chapter 2 BIOS Setup ............................................................................................... 21
The Main Menu (For example: BIOS Ver. : F1).................................................................... 21
Standard CMOS Features .................................................................................................... 23
Advanced BIOS Features ..................................................................................................... 25
Integrated Peripherals .......................................................................................................... 26
Power Management Setup ................................................................................................... 28
PnP/PCI Configurations ........................................................................................................ 29
PC Health Status .................................................................................................................. 30
Frequency/Voltage Control ................................................................................................... 31
Load Fail-Safe Defaults ........................................................................................................ 32
Load Optimized Defaults ...................................................................................................... 32
Set Supervisor/User Password............................................................................................. 33
Save & Exit Setup ................................................................................................................. 34
Exit Without Saving .............................................................................................................. 34
Chapter 3 Install Drivers............................................................................................. 35
7VM400AM-RZ Motherboard
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
Features Summary
CPU
y
y
y
y
y
y
y
y
y
y
y
Socket A for AMD Athlon™ XP / Athlon™ / Duron™ processor
200/266/333/400MHz FSB
Supports 1.4GHz and faster
Chipset
Memory
Northbridge : VIA KM400A
Southbridge : VIA 8237
2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max)
Supports DDR400/DDR333 DIMM
Supports only 2.5V DDR SDRAM
1 AGP slot supports 8X/4X(1.5V) mode
3 PCI slots support 33MHz & PCI 2.2 compliant
2 IDE controller provide IDE HDD/CD-ROM(IDE1, IDE2) with PIO, Bus
Master (Ultra DMA33/ATA66/ATA100/ATA133) operation modes
Can connect up to 4 IDE devices
1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and 2.88M bytes
2 Serial ATA connectors (Note1)
Slots
On-Board IDE
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
On-Board Floppy
On-Board Serial ATA
On-Board Peripherals
1 Parallel port supports Normal/EPP/ECP mode
1 Serial port (COMA), 1 VGA port, COMB on-board
8 USB 2.0/1.1 ports (4 x Rear, 4 x Front by cable)
1 Front Audio connector
1 PS/2 Keyboard
1 PS/2 Mouse
On-Board VGA
On-Board LAN
Built-in VIA KM400A
Builit-in VIA VT6103 chipset
1 RJ45 port
On-Board Sound
VIA VT1617
Supports 2/4/6-channel
Line Out / Line In / Mic In
SPDIF Out
CD In / Game connector
On-Board SATA RAID
Built in VT8237
Supports Disk striping (RAID0) or DISK Mirroring (RAID1)
Supports UDMA up to 150 MB/sec
Up to 2 SATA Device
(Note 1) It is recommended to use SATA (1.5Gb/s) hard disks.
- 5 -
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS
y
y
y
y
y
y
y
y
y
y
y
y
Licensed AWARD BIOS
Supports Q-Flash™
I/O Control
ITE8705
Hardware Monitor
CPU/System fan revolution detect
CPU/System temperature detect
System voltage detect
CPU/System fan fail warning
Supports @BIOS™
Supports EasyTune 4™
Additional Features
Overclocking
Over clock (CPU/DDR) by BIOS
Over voltage (DDR/AGP) br BIOS
Micro ATX size form factor, 24.3cm x 22.2cm
Form Factor
7VM400AM-RZ Motherboard
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7VM400AM-RZ Motherboard Layout
22.2 cm
KB_MS
USB
CPU_FAN
SOCKET A
VIA KM400A
IT8705
BIOS
SYS_FAN
F_AUDIO
CLR_CMOS
CI
AGP
PCI1
SATA1
VIA VT8237
VT6103
CD_IN
PCI2
PCI3
JP1
SATA0
BAT
F_USB1
CODEC
F_PANEL
F_USB2
GAME
PWR_LED
SUR_CEN
COMB
SPDIF
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Block Diagram
CPUCLK+/- (100/133/166/200MHz)
AMD-K7TM
CPU
System Bus
200/266/333/400MHz FSB
AGP 4X/8X
VGA Port
200/266/333/400MHz
DDR
VIA
HCLK+/- (100/133/166/200MHz)
KM400A
AGPCLK
66MHz
NBGCLK66 MHz
33 MHz
14.318 MHz
3 PCI
VT6103
48 MHz
BIOS
PCI BUS 33MHz
VIA
VT8237
Game Port
Floppy
LPC BUS
IT8705
LPT Port
2 COM Ports
24 MHz
33 MHz
ATA33/66/
100/133
8 USB
Ports
6 Channel
CODEC
PS/2 KB/Mouse
IDE Channels
PCICLK
(33MHz)
PCICLK (33MHz)
USBCLK (48MHz)
14.318 MHz
HCLK+/- (100/133/166/200MHz)
CPUCLK+/- (100/133/166/200MHz)
AGPCLK (66MHz)
CLK
GEN
33 MHz
V_Link (66MHz)
7VM400AM-RZ Motherboard
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation Process
To set up your computer, you must complete the following steps:
Step 1- Set System Jumper (JP1)
Step 2- Install the Central Processing Unit (CPU)
Step 3- Install Memory Modules
Step 4- Install Expansion Cards
Step 5- Install I/O Peripherals Cables
Step 3
Step 2
Step 5
Step 4
Step 5
Step 1
Step 1: Set System Jumper (JP1)
The system bus frequency can be switched at 100/133/166/200MHz by adjusting system jumper (JP1).
(The internal frequency depend on CPU.)
Short: 100MHz
1
Open: 133/166/200MHz
1
100MHz
: Fix FSB 200MHz CPU
133/166MHz : Supports FSB 266/333MHz CPU
If you want to use a CPU with 200MHz FSB, please
set JP1 to 100MHz.
JP1
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
- 9 -
Step 2: Install the Central Processing Unit (CPU)
Before installing the processor, adhere to the following warning:
1. Please make sure the CPU type is supported by the motherboard.
2. The processor will overheat without the heatsink and/or fan, resulting in permanent
irreparable damage.
3. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper
installation. Please change the insert orientation.
4. Apply thermal grease between the processor and cooling fan.
5. Never run the processor without the heatsink properly and firmly attached. Permanent damage
will result.
6. Please set the CPU host frequency in accordance with your processor's specifications.
We don't recommend you to set the system bus frequency over the CPU's specification
because these specific bus frequencies are not the standard specifications for CPU, chipset
and most of the peripherals. Whether your system can run under these specific bus frequencies
properly will depend on your hardware configurations, including CPU, Memory, Cards…etc.
Step 2-1: CPU Installation
Socket Actuation Lever
Figure 2.
Locate Pin 1 in the socket and look
for a cut edge on the CPU upper
corner. Insert the CPU into the
socket. (Do not force the CPU into the socket.) Then move the socket
lever to the locked position while holding pressure on the center of the
CPU.
Figure 1.
Pull the rod to the 90-degree
directly.
Step 2-2: CPU Cooling Fan Installation
Figure 1.
Figure 2.
Figure 3.
Apply the thermal tape(or grease)
to provide better heat conduction
between your CPU and cooling
fan.
Fasten the cooling fan support-
ing-base onto the CPU socket on
the motherboard.
Make sure the CPU fan is plugged
to the CPU fan connector, than the
install completely.
7VM400AM-RZ Motherboard
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Install Memory Modules
Before installing the memory modules, adhere to the following warning:
1. Please note that the DIMM module can only fit in one direction due to the one notch. Wrong
orientation will cause improper installation. Please change the insert orientation.
The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects
memory type and size. To install the memory module, just push it vertically into the DIMM socket. The DIMM
module can only fit in one direction due to the notch. Memory size can vary between sockets.
Notch
DDR
1. The DIMM socket has a notch, so the DIMM memory
module can only fit in one direction.
2. Insert the DIMM memory module vertically into the
DIMM socket. Then push it down.
3. Close the plastic clip at both edges of the DIMM
sockets to lock the DIMM module.
Reverse the installation steps when you wish to re-
move the DIMM module.
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
- 11 -
Step 4: Install AGP Card
1. Read the relate AGP card's instruction document before install the AGP card into the computer.
2. If your AGP card has "AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X(1.5V).
AGP 4X/8X notch
3. Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install/
uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the
slot. Make sure your AGP card is locked by the small white-drawable bar.
Step 5: Install I/O Peripherals Cables
Step 5-1: I/O Back Panel Introduction
]
X
Z
[
_
`
a
Y
\
^
X
PS/2 Keyboard and PS/2 Mouse connector
This connector supports standard PS/2 keyboard and PS/2 mouse.
Y/^ USB port
Before you connect your device(s) into USB connector(s), please make sure your device(s) such as
USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also make sure
your OS supports USB controller. If your OS does not support USB controller, please contact OS
vendor for possible patch or driver upgrade. For more information please contact your OS or
device(s) vendors.
Z
[
\
]
_
Parallel port (LPT)
Device like printer can be connected to Parallel port.
Serial port (COMA)
Mouse and modem etc. can be connected to Serial port.
VGA port
Monitor can be connected to VGA port.
LAN port
LAN is fast Ethernet with 10/100Mbps speed.
Line In jack
Devices like CD-ROM, walkman etc. can be connected to Line In jack.
7VM400AM-RZ Motherboard
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
`
a
Line Out jack
Connect the stereo speakers or earphone to this connector.
MIC In jack
Microphone can be connect to MIC In jack.
After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software
selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In"
jack and connect "Center/Subwoofer" to "MIC In" jack.
Step 5-2: Connectors Introduction
2
1
4
5
3
9
16
17
6
12
10
18
11 13
14
15
7
8
1) ATX
10) SUR_CEN
11) SPDIF
2) CPU_FAN
3) SYS_FAN
4) FDD
12) CD_IN
13) COMB
5) IDE1 / IDE2
6) SATA0/SAT1
7) PWR_LED
8) F_PANEL
9) F_AUDIO
14) GAME
15) F_USB1 / F_USB2
16) CLR_CMOS
17) CI
18) BAT
Hardware Installation Process
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1) ATX (ATX Power)
AC power cord should only be connected to your power supply unit after ATX power cable and other
related devices are firmly connected to the mainboard.
Pin No. Definition
Pin No. Definition
1
11
1
3.3V
11
12
13
14
15
16
17
18
19
20
3.3V
2
3.3V
-12V
3
GND
GND
4
VCC
PS_ON(soft on/off)
5
GND
GND
GND
GND
-5V
6
VCC
7
GND
8
Power Good
5V SB (stand by +5V)
+12V
9
VCC
VCC
20
10
10
2) CPU_FAN (CPU Fan Connector)
Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running under
abnormal condition or damaged by overheating. The CPU fan connector supports Max. current up to
600 mA.
Pin No.
Definition
GND
1
1
2
3
+12V
Sense
3) SYS_FAN (System Fan Connector)
This connector allows you to link with the cooling fan on the system case to lower the system temperature.
Pin No.
Definition
GND
1
1
2
3
+12V
Sense
7VM400AM-RZ Motherboard
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4) FDD (Floppy Connector)
Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and
2.88M bytes floppy disk types.
The red stripe of the ribbon cable must be the same side with the Pin1.
34
33
2
1
5) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Please connect first hard disk to IDE1 and connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
40
39
IDE1
IDE2
2
1
6) SATA0 / SATA1 (Serial ATA Connector)
Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA
and install the proper driver in order to work properly.
Pin No.
Definition
GND
TXP
1
2
3
4
5
6
7
7
TXN
1
GND
RXN
RXP
GND
Hardware Installation Process
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode.
Pin No.
Definition
MPD+
MPD-
1
1
2
3
MPD-
8) F_PANEL (2 x 10 pins Connector)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
Speaker Connector
Message LED/
Power/
Sleep LED
Power
Switch
1
1
1
1
2
1
20
19
1
Reset Switch
IDE Hard Disk Active LED
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
RES (Reset Switch)
PW (Power Switch)
MSG (Message LED/ Power/ Sleep LED)
NC
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
7VM400AM-RZ Motherboard
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
9) F_AUDIO (Front Audio Connector)
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper.
In order to utilize the front audio header, your chassis must have front audio connector. Also please
make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find
out if the chassis you are buying support front audio connector, please contact your dealer. Please note,
you can have the alternative of using front audio connector or of using rear audio connector to play
sound.
Pin No.
Definition
MIC
1
2
3
4
5
6
7
8
9
10
1
2
GND
REF
Power
9
10
Front Audio (R)
Rear Audio (R)
Reserved
No Pin
Front Audio (L)
Rear Audio (L)
10) SUR_CEN (Surround Center Connector)
Please contact your nearest dealer for optional SUR_CEN cable.
Pin No.
Definition
SUR OUTL
SUR OUTR
GND
2
6
1
5
1
2
3
4
5
6
No Pin
CENTER_OUT
BASS_OUT
11) SPDIF (SPDIF Out Connector)
The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to
an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input
function. Be careful with the polarity of the SPDIF connector. Check the pin assignment carefully while
you connect the SPDIF cable, incorrect connection between the cable and connector will make the
device unable to work or even damage it. For optional SPDIF cable, please contact your local dealer.
Pin No.
Definition
VCC
1
2
3
4
5
6
1
5
2
6
No Pin
SPDIF
NC
GND
GND
Hardware Installation Process
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
12) CD_IN (CD In Connector)
Connect CD-ROM or DVD-ROM audio out to the connector.
Pin No.
Definition
CD-L
1
1
2
3
4
GND
GND
CD-R
13) COMB (COM B Connector)
Be careful with the polarity of the COMB connector. Check the pin assignment carefully while you
connect the COMB cable, incorrect connection between the cable and connector will make the device
unable to work or even damage it. For optional COMB cable, please contact your local dealer.
Pin No.
Definition
NDCDB-
NSINB
1
2
3
4
5
6
7
8
9
10
2
1
10
9
NSOUTB
NDTRB-
GND
NDSRB-
NRTSB-
NCTSB-
NRIB-
No Pin
14) GAME (Game Connector)
This connector supports joystick, MIDI keyboard and other relate audio devices. Check the pin assign-
ment while you connect the game cables. Please contact your nearest dealer for optional game cables.
Pin No. Definition
Pin No. Definition
2
1
16
15
1
2
3
4
5
6
7
8
VCC
9
GPSA1
GND
GRX1_R
GND
10
11
12
13
14
15
16
GRY1_R
VCC
GPSA2
VCC
GPSB1
MSO_R
GPSB2
No Pin
GRX2_R
GRY2_R
MSI_R
7VM400AM-RZ Motherboard
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
15) F_USB1 / F_USB2 (Front USB Connector)
Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you
connect the front USB cable, incorrect connection between the cable and connector will make the de-
vice unable to work or even damage it. For optional front USB cable, please contact your local dealer.
Pin No.
Definition
Power
1
2
3
4
5
6
7
8
9
10
Power
2
1
10
9
USB Dx-
USB Dy-
USB Dx+
USB Dy+
GND
GND
No Pin
NC
16) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily short
1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
Short: Clear CMOS
1
Open: Normal
1
17) CI (Chassis Intrusion, Case Open)
This 2-pin connector allows your system to enable or disable the "case open" item in BIOS if the
system case begin remove.
Pin No.
1
2
Definition
Signal
GND
1
Hardware Installation Process
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
18) BAT (Battery)
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type rec-
ommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
If you want to erase CMOS...
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery, wait for 30 second.
3. Re-install the battery.
4. Plug the power cord and turn ON the computer.
7VM400AM-RZ Motherboard
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 BIOS Setup
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the
basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it
retains the Setup information when the power is turned off.
ENTERING SETUP
Powering ON the computer and pressing <Del> immediately will allow you to enter Setup. Ifyou require
more advanced BIOS settings, please go to "Advanced BIOS" setting menu. To enter Advanced BIOS
setting menu, press "Ctrl+F1" key on the BIOS screen.
CONTROL KEYS
< >< >< ><
>
Move to select item
<Enter>
Select Item
<Esc>
Main Menu - Quit and not save changes into CMOS Status Page Setup Menu
and Option Page Setup Menu - Ex it current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page Setup Menu
Item Help
<+/PgUp>
<-/PgDn>
<F1>
<F2>
<F5>
<F6>
<F7>
Restore the previous CMOS value from CMOS, only for Option Page Setup Menu
Load the file-safe default CMOS value from BIOS default table
Load the Optimized Defaults
<F8>
Q-Flash utility
<F9>
System Information
<F10>
Save all the CMOS changes, only for Main Menu
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the pos sible
selections for the highlighted item. To exit the Help Window press <Esc>.
The Main Menu (For example: BIOS Ver. : F1)
Once y ou enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the
screen. The Main Menu allows you to select from eight setup functions and two exit choices. Use
arrow keys to s elect among the items and press <Enter> to accept or enter the sub-menu.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
}
}
}
}
}
}
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Frequency/Voltage Control
ESC: Quit
higf: Select Item
F8: Q-Flash
F10: Save & Exit Setup
Time, Date, Hard Disk Type...
- 21 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
If you can't find thesetting you want, please press "Ctrl+F1"to search the advanced
option hidden.
• Standard CMOS Features
This setup page includes all the items in s tandard compatible BIOS.
• Advanced BIOS Features
This setup page includes all the items of Award special enhanced features.
• Integrated Peripherals
This setup page includes all onboard peripherals.
• Power Management Setup
This setup page includes all the items of Green function features.
• PnP/PCI Configuration
This setup page includes all the configurations of PCI & PnP ISA resources.
• PC Health Status
This setup page is the System auto detect Temperature, voltage, fan, s peed.
• Frequency/Voltage Control
This setup page is control CPU clock and frequency ratio.
• Load Fail-Safe Defaults
Fail-Safe Defaults indicates the value of the sys tem parameters which the system would be in safe
configuration.
• Load Optimized Defaults
Optimized Defaults indicates the value of the system parameters which the system would be in
best performance configuration.
• Set Supervisor Password
Change, set, or disable password. It allows you to limit acces s to the s ystem and Setup, or just
to Setup.
• Set User Password
Change, set, or disable password. It allows you to limit access to the sy stem.
• Save & Exit Setup
Save CMOS value settings to CMOS and exit s etup.
• Exit Without Saving
Abandon all CMOS value changes and exit s etup.
7VM400AM-RZ Motherboard
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
wed, Sep 1 2004
22:31:24
Item Help
Menu Level}
Change the day, month,
year
} IDE Channel 0 Master
} IDE Channel 0 Slave
} IDE Channel 1 Master
} IDE Channel 1 Slave
} IDE Channel 2 Master
} IDE Channel 3 Master
[None]
[None]
[None]
[None]
[None]
[None]
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
Drive A
Drive B
Floppy 3 Mode Suport
[1.44M, 3.5"]
[None]
[Disabled]
<Day>
1 to 31 (or maximum
allowed in the month)
Halt On
[All, But Keyboard]
<Year>
1999 to 2098
Base Memory
Extended Memory
Total Memory
640K
127M
128M
higf: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
ESC: Exit F1: General Help
F7: Optimized Defaults
Date
The date format is <week>, <month>, <day>, <y ear>.
Week
Month
Day
The w eek, from Sun to Sat, determined by the BIOS and is display only
The month, Jan. Through Dec.
The day, from 1 to 31 (or the maximum allowed in the month)
The year, from 1999 through 2098
Year
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0/1 Master, Slave / IDE Channel 2/3 Master
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Channel 0 Master(Slave) IDE Device Setup. You can use one of three methods:
Auto
Allow s BIOS to automatically detect IDE devices during POST(default)
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster sys tem start up.
None
Manual
User can manually input the correct settings
IDE Channel 2/3 Master IDE Device Setup. You can use one of two methods:
Auto
Allow s BIOS to automatically detect IDE devices during POST(default)
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster sys tem start up.
None
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Hard drive information should be labeled on the outside driv e casing. Enter the appropriate option
based on this information.
Cylinder
Head
Number of cylinders
Number of heads
- 23 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Precomp
Write precomp
Landing Zone Landing zone
Sector
Number of sectors
If a hard disk has not been installed, select NONE and press <Enter>.
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
None
No floppy drive installed
360K, 5.25" 5.25 inch PC-type standard driv e; 360K byte capacity.
1.2M, 5.25" 5.25 inch AT-type high-density drive; 1.2M byte capacity
(3.5 inch when 3 Mode is Enabled).
720K, 3.5"
3.5 inch double-sided drive; 720K byte capacity
1.44M, 3.5" 3.5 inch double-sided drive; 1.44M byte capacity.
2.88M, 3.5" 3.5 inch double-sided drive; 2.88M byte capacity.
Floppy 3 Mode Support (for Japan Area)
Disabled
Driv e A
Driv e B
Both
Normal Floppy Drive. (Default v alue)
Drive A is 3 mode Floppy Drive.
Drive B is 3 mode Floppy Drive.
Drive A & B are 3 mode Floppy Drives.
Halt on
The category determines whether the computer will stop if an error is detected during power up.
No Errors
The sy stem boot will not s top for any error that may be detected and you
will be prompted.
All Errors
Whenever the BIOS detects a non-fatal error the s ystem will be stopped.
All, But Keyboard The s ystem boot will not stop for a keyboard error; it will stop for all other
errors . (Default value)
All, But Diskette
The system boot will not stop for a disk error; it will stop for all other errors.
All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all
other errors.
Memory
The category is display -only which is determined by POST (Power On Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory ins talled
in the system.
The value ofthe base memory is typically 512K for systems with 512K memory installed on
the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1 MB in the CPU's memory address map.
7VM400AM-RZ Motherboard
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced BIOS Features
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
} Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
[Press Enter]
[Floppy]
Item Help
Menu Level}
Select Hard Disk Boot
Device Priority
[Hard Disk]
[CDROM]
[Setup]
higf: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
ESC: Exit F1: General Help
F7: Optimized Defaults
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to s electa device, then press<+> to mov e it up, or <-> to move it down the list.
Pres s <ESC> to exit this menu.
First / Second / Third Boot Device
Floppy
LS120
Hard Disk
CDROM
ZIP
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
Legacy LAN
Disabled
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-CDROM.
Select your boot device priority by USB-HDD.
Select your boot device priority by Legacy LAN.
Select your boot device priority by Disabled.
Password Check
Sys tem
The sy stem can not boot and can not acces s to Setup page will be denied
if the correct password is not entered at the prompt.
Setup
The s ystem will boot, but acces s to Setup will be denied if the correct
passw ord is not entered at the prompt. (Default v alue)
- 25 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
OnChip IDE Channel0
OnChip IDE Channel1
OnChip Serial ATA
SATA Mode
[Enabled]
[Enabled]
[Enabled]
[RAID]
Item Help
Menu Level}
If a hard disk
controller card is
used, set at Disabled
AC97 Audio
VIA Onboard LAN
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
USB 1.1 Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
Game Port Address
Midi Port Address
x Midi Port IRQ
[Enabled]
Enable onboard IDE
channel
[Disabled]
Disable onboard IDE
channel
[201]
[Disabled]
10
higf: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
ESC: Exit F1: General Help
F7: Optimized Defaults
OnChip IDE Channel0
When set at "Enabled", it allows y ou to use the onboard primary PCI IDE. If a hard disk controller
card is used, please set at "Disabled".
Enabled
Disabled
Enable onboard 1st channel IDE port. (Default v alue)
Disable onboard 1st channel IDE port.
OnChip IDE Channel1
When setat "Enabled", it allows you to use the onboard secondary PCI IDE. If a hard disk controller
card is used, please set at "Disabled".
Enabled
Enable onboard 2nd channel IDE port. (Default v alue)
Disabled
Disable onboard 2nd channel IDE port.
OnChip Serial ATA
Enabled
Enable onboard VT8237 Serial ATA support. (Default v alue)
Disabled
Disabled VT8237 Serial ATA support.
SATA Mode
RAID
IDE
Select SATA chip function as RAID. (Default v alue)
Select SATA chip function as IDE.
AC97 Audio
Auto
Disabled
Enable onboard AC'97 audio function. (Default v alue)
Disable this function.
VIA Onboard LAN
Enabled
Enable onboard LAN function. (Default v alue)
Disabled
Disable this function.
USB 1.1 Controller
Disable this function if you are not using the onboard USB feature.
Enabled
Disabled
Enable USB 1.1 controller. (Default v alue)
Disable USB 1.1 controller.
USB 2.0 Controller
Disable this function if you are not using the onboard USB feature.
7VM400AM-RZ Motherboard
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabled
Disabled
Enable USB 2.0 controller. (Default v alue)
Disable USB 2.0 controller.
USB Keyboard Support
Enabled
Disabled
Enable USB key board support.
Disable USB keyboard support. (Default v alue)
USB Mouse Support
Enabled
Disabled
Enable USB mouse support.
Disable USB mouse support. (Default v alue)
Onboard Serial Port 1
Auto
BIOS will automatically s etup the port 1 address.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Enable onboard Serial port 1 and address is 3F8. (Default v alue)
Enable onboard Serial port 1 and address is 2F8.
Enable onboard Serial port 1 and address is 3E8.
Enable onboard Serial port 1 and address is 2E8.
Disable onboard Serial port 1.
Onboard Serial Port 2
Auto
BIOS will automatically s etup the port 2 address.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8. (Default v alue)
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
Disable onboard Serial port 2.
Onboard Parallel port
This feature allows you to select from a given set ofparameters if the parallel port uses the onboard
I/O controller.
378/IRQ7
278/IRQ5
Disabled
Enable onboard LPT port and address is 378/IRQ7. (Default v alue)
Enable onboard LPT port and address is 278/IRQ5.
Disable onboard LPT port.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP
Using Parallel port as Standard Parallel Port. (Default v alue)
EPP
ECP
ECP+EPP
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Ex tended Capabilities Port.
Using Parallel port as ECP & EPP mode.
Game Port Address
201
Set Game Port Address to 201. (Default v alue)
209
Disabled
Set Game Port Address to 209.
Disable this function.
Midi Port Address
300
Set Midi Port Address to 300.
330
Set Midi Port Address to 330.
Disabled
Disable this function. (Default v alue)
Midi Port IRQ
5
Set Midi Port IRQ to 5.
10
Set Midi Port IRQ to 10. (Default v alue)
- 27 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type
x USB Device Wake-Up from S3
Power LED in S1 state
Soft-Off by PWRBTN
AC Back Function
Keyboard Power On
Mouse Power On
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
[S1(POS)]
Disabled
Item Help
Menu Level}
[S1]
[Blinking]
[Instant-Off]
[Soft-Off]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
Everyday
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
0 : 0 : 0
higf: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
ESC: Exit F1: General Help
F7: Optimized Defaults
ACPI Suspend Type
S1(POS)
S3(STR)
Set ACPI suspend type to S1. (Default v alue)
Set ACPI suspend type to S3.
USB Dev ice Wake-Up From S3
This function will available when "ACPI Suspend Type" set at "S3/STR".
Disabled
USB device can't wake up system from S3.
Enabled
USB device can wake up system from S3. (Default v alue)
Power LED in S1 state
Blinking
In standby mode(S1), pow er LED will blink. (Default v alue)
Dual/Off
In standby mode(S1):
a. If you use single color LED, power LED will ture off.
b. If you use dual color LED, power LED will ture to another color.
Soft-off by PWR-BTTN
Instant-off
Press power button then Power off instantly. (Default v alue)
Delay 4 Sec.
Press power button 4 sec to Power off. Enter suspend if button is pressed
less than 4 sec.
AC Back Function
Soft-Off
Full-On
Alway s in Off s tate when AC back to the sys tem. (Default value)
Alway s power on the system when AC back.
Memory
System power on depends on the status before AC lost.
Keyboard Power On
Disabled
Disable this function. (Default v alue)
Pass word
Keyboard 98
Enter from 1 to 8 characters to set the key board pow er on pass word.
If your keyboard has a "POWER Key" button, you can press the key to
power on your sy stem.
Mouse Power On
Disabled
Enabled
Disabled this function. (Default v alue)
Power on system by mouse event.
7VM400AM-RZ Motherboard
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PME Event Wake Up
When set atEnabled, any PCI-PM event can awake the system from a PCI-PM controlled stated.
This feature requires an ATX power supply thatprovides at least 1A on the +5VSB lead.
Disabled
Enabled
Disable this function.
Enable PME as wake up event. (Default v alue)
ModemRingOn/WakeOnLan
An incoming call via modem or an input s ignal comes from the other client server on the LAN can
awake the system from any suspend s tate.
Disabled
Enabled
Disable Modem Ring on function.
Enable Modem Ring on function. (Default v alue)
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Date/time to power on sy stem.
Disabled
Enabled
Disable this function. (Default Value)
Enable alarm function to POWER ON sy stem.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm :
Everyday, 1~31
(0~23) : (0~59) : (0~59)
KB Power ON Password
Enter
Input password (from 1 to 5 characters) and press Enter to setthe keyboard
power on pass word.
PnP/PCI Configurations
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PnP/PCI Configurations
PCI 1 IRQ Assignment
PCI 2 IRQ Assignment
PCI 3 IRQ Assignment
[Auto]
[Auto]
[Auto]
Item Help
Menu Level}
Device(s) using this
INT:
Display Cntrlr
-Bus 1 Dev 0 Func 0
higf: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
ESC: Exit F1: General Help
F7: Optimized Defaults
PCI 1 IRQ Assignment
Auto
Auto assign IRQ to PCI 1. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.
PCI 2 IRQ Assignment
Auto
Auto assign IRQ to PCI 2. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
PCI 3 IRQ Assignment
Auto
Auto assign IRQ to PCI 3. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
- 29 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
[Disabled]
Reset Case Open Status
Item Help
Case Opened
Vcore
25VSTR
+3.3V
+12V
No
OK
OK
OK
Menu Level u
[Disabled]
Don't reset case
open status
OK
32oC
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
45oC
4687 RPM
0 RPM
[Disabled]
[Disabled]
[Enabled]
Clear case open
status at next boot
higf: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Save Default
ESC: Exit F1: General Help
F7: Optimized Defaults
Reset Case Open Status
Case Opened
If the case is closed, "Case Opened" will show "No".
If the case hav e been opened, "Case Opened" w ill show "Yes".
If you want to reset "Case Opened" value, set "Res et Case Open Status" to "Enabled" and save
CMOS, your computer w ill restart.
Current Voltage (V) Vcore / 25VSTR / +3.3V / +12V
Detect system's voltage status automatically.
Current System/CPU Temperature
Detect system/CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/system Fan speed status automatically.
CPU FAN Fail Warning
Disabled
Enabled
Fan w arning function disable. (Default value)
Fan w arning function enable.
SYSTEM FAN Fail Warning
Disabled
Enabled
Fan w arning function disable. (Default value)
Fan w arning function enable.
7VM400AM-RZ Motherboard
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
Auto Detect PCI/DIMM Clk
Spread Specturm
CPU Host Clock Control
x CPU Clock
DRAM Clock(MHz)
[Enabled]
[Enabled]
[Disabled]
100MHz
[By SPD]
[Auto]
[Auto]
Item Help
Menu Level}
AGP OverVoltage Control
DIMM OverVoltage Control
higf: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Default
ESC: Exit F1: General Help
F7: Optimized Defaults
Incorrect using these features may cause your system broken. For power End-User use only!
Auto Detect PCI/DIMM Clk
Disabled
Enabled
Disable this function.
Auto detect PCI/DIMM clock. (Default v alue)
Spread Spectrum
Disabled
Disable this function.
Enabled
Enable clock s pread spectrum. (Default v alue)
CPU Host Clock Control
Pleas e note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic s ystem res tart or clear the CMOS setup data and perform a safe res tart.
Disabled
Enabled
Disable CPU Host Clock Control. (Default v alue)
Enable CPU Host Clock Control.
CPU Clock
100MHz
133MHz
Set CPU Clock to 100MHz~132MHz.
Set CPU Clock to 133MHz~165MHz.
DRAM Clock (MHz)
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
By SPD
133-DDR266
Set memory frequency by DRAM SPD data. (Default v alue)
If you use DDR266 DRAM module, please set at "133-DDR266".
AGP Ov erVoltage Control
Increase AGP voltage may getstable for over-clock. But it may damage to AGP card when enable
this feature.
Auto
Supply voltage as AGP required. (Default v alue)
Increase AGP v oltage +0.1V.
Increase AGP v oltage +0.2V.
+0.1V
+0.2V
+0.3V
Increase AGP v oltage +0.3V.
- 31 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMM OverVoltage Control
Increase DIMM v oltage may get stable for over-clock. But it may damage to memory module
when enable this feature.
Auto
Supply voltage as DIMM required. (Default v alue)
Increase DIMM voltage +0.1V.
Increase DIMM voltage +0.2V.
+0.1V
+0.2V
+0.3V
Increase DIMM voltage +0.3V.
Load Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
}
}
}
}
}
}
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
PnP/PCI CLoad Fail-Safe Defaults(Y/N)?N
PC Health Status
Exit Without Saving
Frequency/Voltage Control
ESC: Quit
higf: Select Item
F8: Q-Flash
F10: Save & Exit Setup
Load Fail-Safe Defaults
Fail-Safe defaults contain the most appropriate values of the s ystem parameters that allow minimum
system performance.
Load Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
}
}
}
}
}
}
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
PnP/PCI CLoad Optimized Defaults(Y/N)?N
PC Health
Frequency/Voltage Control
ESC: Quit
higf: Select Item
F8: Q-Flash
F10: Save & Exit Setup
Load Optimized Defaults
Selecting this field loads the factory defaults for BIOS and ChipsetFeatures which the system automatically
detects.
7VM400AM-RZ Motherboard
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Supervisor/User Password
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
}
}
}
}
}
}
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI CEnter Password:
PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Exit Without Saving
Frequency/Voltage Control
ESC: Quit
higf: Select Item
F8: Q-Flash
F10: Save & Exit Setup
Change/Set/Disable Password
When you select this function, the following message will appear atthe center of the screen to assist you
in creating a pas sword.
Type the password, up to eightcharacters, and press <Enter>. You will be asked to confirm the password.
Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not
enter a passw ord.
To disable pass word, jus t press <Enter> w hen you are prompted to enter pass word. A mess age
"PASSWORD DISABLED" will appear to confirm the pass word being disabled. Once the password is
disabled, the system w ill boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passw ords:
SUPERVISOR PASSWORDand a USER PASSWORD. When disabled, anyone may access all BIOS
Setup program function. When enabled, the Supervis or password is required for entering the BIOS
Setup program and having full configuration fields, the User password is required to access only basic
items.
If you select "System" at "Password Check" in Advance BIOS Features Menu, you will be prompted
for the password every time the system is rebooted or any time you try to enter Setup Menu.
If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only
when you try to enter Setup.
- 33 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Save & Exit Setup
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
}
}
}
}
}
}
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI C
PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save to CMOS and EXIT(Y/N)?Y
Exit Without Saving
Frequency/Voltage Control
ESC: Quit
higf: Select Item
F8: Q-Flash
F10: Save & Exit Setup
Save & Exit Setup
Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS.
Type "N" will return to Setup Utility.
Exit Without Saving
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
}
}
}
}
}
}
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI C
PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Quit Without Saving(Y/N)?N
Exit Without Saving
Frequency/Voltage Control
ESC: Quit
higf: Select Item
F8: Q-Flash
F10: Save & Exit Setup
Abandon all Data
Type "Y" will quit the Setup Utility without saving to RTC CMOS.
Type "N" will return to Setup Utility.
7VM400AM-RZ Motherboard
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Install Drivers
Install Drivers
Pictures below are shown in Windows XP
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver
CD-title will auto start and show the installation guide. If not, please double click the CD-ROM
device icon in "My computer", and execute the setup.exe.
Install Chipset Drivers
This page shows the drivers that need to be installed for the system. Click each item to install the driver
manually or switch to the
to install the drivers automatically.
The "Xpress Install" uses the"Click and Go" technology to install the drivers automatically. Just select the
drivers you want then click the "GO" button. The
will finish the installation for you automatically.
Massage: Some device drivers will restart
your system automatically. After restarting
your system the "Xpress Install" will
continue to install other drivers.
We recommend that you install all components in the list.
- 35 -
Driver Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Driver install finished !
You have to reboot system !
Item Description
n
n
n
n
n
n
n
VIA 4IN1 Driver
For INF, AGP, IDE and DMA driver
VIA KM400/KM266PRO VGA Driver
For KM400/KM266PRO drvier
USB Patch for WinXP
This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP
VIA Lan Driver
For VIA Phy family Lan driver
VIA AC97 Audio Driver
Audio driver for VIA codec chipset
VIA 8237 Serial ATA Driver
For VIA 8237 SATA Driver
VIA USB 2.0 Controller
For VIA VT8233 (VT6203) / VIA VT8235 / VIA VT8237 south bridge
For USB2.0 driver support under Windows XP operating system, please use Windows Service
Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus
controller" under "Device Manager". Please remove the question mark and restart the system
(System will auto-detect the right USB2.0 driver).
7VM400AM-RZ Motherboard
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- 37 -
Driver Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
7VM400AM-RZ Motherboard
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Us
—
Taiwan (Headquarters)
—
Japan
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien,
Taiwan
NIPPON GIGA-BYTE CORPORATION
WEB address : http://www.gigabyte.co.jp
—
Singapore
TEL: +886 (2) 8912-4888
GIGA-BYTE SINGAPORE PTE. LTD.
Tech. Support :
FAX: +886 (2) 8912-4003
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
Non-Tech. Support(Sales/Marketing) :
WEB address (English): http://www.gigabyte.com.tw
—
U.K.
G.B.T. TECH. CO., LTD.
Address: GUnit 13 Avant Business Centre 3 Third Avenue,
Denbigh West Bletchley Milton Keynes, MK1 1DR, UK, England
TEL: +44-1908-362700
—
U.S.A.
G.B.T. INC.
Address: 17358 Railroad St, City of Industry, CA 91748.
TEL: +1 (626) 854-9338
FAX: +44-1908-362709
Tech. Support :
FAX: +1 (626) 854-9339
Non-Tech. Support(Sales/Marketing) :
Tech. Support :
http://www.giga-byte.com/TechSupport/ServiceCenter.htm
Non-Tech. Support(Sales/Marketing) :
—
The Netherlands
GIGA-BYTE TECHNOLOGY B.V.
TEL: +31 40 290 2088
—
Germany
G.B.T. TECHNOLOGY TRADING GMBH
Address: Friedrich-Ebert-Damm 112 22047 Hamburg
TEL: +49-40-2533040 (Sales)
NLTech.Support: 0900-GIGABYTE (0900-44422983)
BE Tech.Support: 0900-84034
FAX: +31 40 290 2089
+49-1803-428468 (Tech.)
Tech. Support :
FAX: +49-40-25492343 (Sales)
Non-Tech. Support(Sales/Marketing) :
WEB address : http://www.giga-byte.nl
+49-1803-428329 (Tech.)
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
WEB address : http://www.gigabyte.de
- 39 -
Driver Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
—
China
—
Australia
NINGBO G.B.T. TECH. TRADING CO., LTD.
Tech. Support :
GIGABYTE TECHNOLOGY PTY. LTD.
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
WEB address : http://www.gigabyte.com.cn
Shanghai
http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm
Non-Tech. Support(Sales/Marketing) :
WEB address : http://www.giga-byte.com.au
—
France
TEL: +86-021-63410999
FAX: +86-021-63410100
Beijing
GIGABYTE TECHNOLOGY FRANCES S.A.R.L.
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
WEB address : http://www.gigabyte.fr
TEL: +86-010-82886651
FAX: +86-010-82888013
Wuhan
TEL: +86-027-87851061
FAX: +86-027-87851330
GuangZhou
—
Russia
Moscow Representative Office Of Giga-Byte Technology Co.,
Ltd.
TEL: +86-020-87586074
FAX: +86-020-85517843
Chengdu
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
WEB address : http://www.gigabyte.ru
TEL: +86-028-85236930
FAX: +86-028-85256822
Xian
—
Poland
TEL: +86-029-85531943
FAX: +86-029-85539821
Shenyang
Representative Office Of Giga-Byte Technology Co., Ltd.
POLAND
Tech. Support :
TEL: +86-024-23960918
FAX: +86-024-23960918-809
Non-Tech. Support(Sales/Marketing) :
WEB address : http://www.gigabyte.pl
7VM400AM-RZ Motherboard
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|