Evo Fitness Elliptical Trainer REV 400 User Manual

USER’S MANUAL  
EVO REV 400 ELLIPTICAL TRAINER  
MODEL NUMBER: REV 400  
USER WEIGHT LIMITATION: 300 lbs.  
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167  
SERIAL NUMBER (found on frame):  
V-02-20060119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
EVO REV 400 ELLIPTICAL TRAINER  
HARDWARE COMPARISON CHART  
Hardware chart:  
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help  
you identify those items that may be unfamiliar to you.  
NO. DESCRIPTION  
QTY.  
2
80  
98  
105  
30  
77  
78  
79  
80  
88  
91  
97  
98  
20 x 91 x M14mm Bolt  
30  
M8 x 60mm Bolt  
M10 x 90mm Bolt  
M8 x 80mm Bolt  
M8 x 15mm Bolt  
M14 Nut  
2
2
2
100  
A
88  
91  
97  
77  
78  
2
2
ID 8mm Curve Washer  
M4 x 12mm Screw  
M10 Nut  
4
101  
8
2
100 M4 x 50mm Screw  
101 ID 10mm Curve Washer  
102 M4 x 15mm Screw  
105 M6 x 20mm Bolt  
1
79  
102  
2
8
4
B
C
A
B
C
D
E
M14 Bushing Tool  
5mm Allen Key  
8mm Wrench  
1
1
1
E
D
Wrench for M10 Nut  
Wrench  
1
1
MILLIMETERS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
EVO REV 400 ELLIPTICAL TRAINER  
HARDWARE COMPARISON CHART  
Hardware chart:  
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help  
you identify those items that may be unfamiliar to you.  
NO. DESCRIPTION  
QTY.  
5
2
1
6
1
Computer  
1
1
1
1
1
1
2
2
4
1
1
2
Front Upright Frame  
Left Upright  
5
6
Right Upright  
7
Hand Rail Frame – Left  
Hand Rail Frame – Right  
Water Bottle Holder  
Handlebar Cover  
Handlebar Inside Cover  
Handlebar – Left  
8
9
13  
14  
16  
17  
7
13  
8
9
Handlebar – Right  
Front Frame Cover –  
Upper  
59  
1
Front Frame Cover –  
Lower  
60  
99  
1
1
1
Frame  
107 Water Bottle  
59  
17  
16  
14  
107  
60  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
EVO REV 400 ELLIPTICAL TRAINER  
PARTS LIST  
No. Description  
Qty. Order No.  
No. Description  
Qty. Order No.  
1
Computer  
1
1
1
1
1
1
1
1
2
4
2
2
2
4
4
1
1
4
2
2
2
2
2
2
2
8
4
2
2
REV400-01  
REV400-02  
REV400-03  
REV400-04  
REV400-05  
REV400-06  
REV400-07  
REV400-08  
REV400-09  
REV400-10  
REV400-11  
REV400-12  
REV400-13  
REV400-14  
REV400-15  
REV400-16  
REV400-17  
REV400-18  
REV400-19  
REV400-20  
REV400-21  
REV400-22  
REV400-23  
REV400-24  
REV400-25  
REV400-26  
REV400-27  
REV400-28  
REV400-29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
20 x 91 x M14mm Bolt  
Bearing 6804zz  
Level Adjusters  
Pedal Arm - Left  
Pedal Arm - Right  
C Clips  
2
4
2
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
1
2
2
2
1
1
1
3
1
1
1
REV400-30  
REV400-31  
REV400-32  
REV400-33  
REV400-34  
REV400-35  
REV400-36  
REV400-37  
REV400-38  
REV400-39  
REV400-40  
REV400-41  
REV400-42  
REV400-43  
REV400-44  
REV400-45  
REV400-46  
REV400-47  
REV400-48  
REV400-49  
REV400-50  
REV400-51  
REV400-52  
REV400-53  
REV400-54  
REV400-55  
REV400-56  
REV400-57  
REV400-58  
2
Front Upright Frame  
Console Small Cover - Left  
Console Small Cover - Right  
Left Upright  
3
4
5
6
Right Upright  
7
Hand Rail Frame - Left  
Hand Rail Frame - Right  
Water Bottle Holder  
Bearing 2202zz  
Pedal Arm Adjusters  
Bushing  
8
9
Bearing  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
Hand Rail Cap  
Handlebar Pivot Outside  
Bushing  
Pedal Arm Rear Shaft  
Pedal Arm Rear Shaft  
Bushing  
Handlebar Pivot Inside Bushing  
Handlebar Cover  
Adjuster Motor  
Spiral Shaft  
Handlebar Inside Cover  
Bearing 6004zz  
Motor Bracket  
Volute Shaft  
Handlebar - Left  
Motor Control Board  
Magnet Bracket Shaft  
Spring  
Handlebar - Right  
Pedal Arm Front Pivot Cover -  
Left  
Hand Rail Frame Foam Grips  
Handlebar Foam Grips  
Hand Pulse Sensor  
Pedal Soft Cushion  
Pedal  
Magnet Bracket Shaft  
Crank Disk Support Cover  
Crank  
Crank Disk  
Belt  
Pedal Support Base  
Pedal Buffer Sets  
Bearing 608zz  
M8 x 20mm CAP Bolt  
Flywheel Assembly  
Bearing 6000zz  
Flywheel Axle  
Bushing 8 x 12mm  
Pedal Fixing Base  
Pedal Cover  
Flywheel Shaft Fixing  
Volute Bracket  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
EVO REV 400 ELLIPTICAL TRAINER  
PARTS LIST  
No. Description  
Front Frame Cover - Upper  
Qty. Order No.  
No. Description  
Qty. Order No.  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
1
1
1
2
2
4
1
2
2
2
1
1
1
1
1
26  
2
4
2
2
2
6
2
2
8
4
12  
8
5
2
REV400-59  
REV400-60  
REV400-61  
REV400-62  
REV400-63  
REV400-64  
REV400-65  
REV400-66  
REV400-67  
REV400-68  
REV400-69  
REV400-70  
REV400-71  
REV400-72  
REV400-73  
REV400-74  
REV400-75  
REV400-76  
REV400-77  
REV400-78  
REV400-79  
REV400-80  
REV400-81  
REV400-82  
REV400-83  
REV400-84  
REV400-85  
REV400-86  
REV400-87  
REV400-88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
M10 Nylon Nut  
2
1
4
2
2
1
32  
5
8
2
1
1
2
8
1
1
4
1
1
REV400-89  
REV400-90  
REV400-91  
REV400-92  
REV400-93  
REV400-94  
REV400-95  
REV400-96  
REV400-97  
REV400-98  
REV400-99  
REV400-100  
REV400-101  
REV400-102  
REV400-103  
REV400-104  
REV400-105  
REV400-106  
REV400-107  
Front Frame Cover - Lower  
Crank Disk Axle  
M12 Nut  
ID 8mm Curve Washer  
10 x 22 x 2mm Washer  
10 x 15 x 1.5mm  
M4 x 40mm CAP Screw  
M4 x 19mm Hard Screw  
M4 x 19mm Screw  
M4 x 12mm Screw  
M10 Head Nut  
Crank Disk Support Bushing  
Bearing 6005zz  
Bearing 6400zz  
Strengthen Wheel Adjusters Set  
Rear Stabilizer Cap  
Rear Stabilizer Cushion  
Caster  
Front Cover  
Frame  
Frame Outside Cover - Left  
Frame Inside Cover - Left  
Frame Inside Cover - Right  
Frame Outside Cover - Right  
M8 x 15mm Allen Head Bolt  
M8 x 20mm CAP Screws  
M8 x 90mm Allen Head Bolt  
M8 x 60mm Allen Head Bolt  
M10 x 90mm Bolt  
100 M4 x 50mm Bolt  
101 ID 10mm Curve Washer  
102 M4 x 15mm Hard Screw  
103 Upper Computer Wire  
104 Lower Computer Wire  
105 M6 x 20mm Bolt  
106 Lower Hand Pulse Wire  
107 Water Bottle  
M8 x 80mm Allen Head Bolt  
M8 x 15mm Bolt  
M10 x 45mm Allen Head Bolt  
M10 x 45mm Screw  
M6 x 20mm Allen Head Bolt  
M6 x 15mm Screw  
Fixing Inserts  
M6 Nylon Nut  
M8 Nylon Nut  
M14 Nut  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
EVO REV 400 ELLIPTICAL TRAINER  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
10  
1
21  
95  
10  
21  
95  
21  
21  
20  
20  
7
8
9
19  
19  
10  
10  
16  
9
2
3
17  
4
80  
11  
97  
97  
14  
14  
14  
91  
79  
15  
80  
12  
15  
105  
91  
79  
97  
11  
102  
15  
12  
22  
97  
78  
102  
13  
22  
83  
23  
24  
86  
25  
15  
6
83  
23  
13  
5
75  
75  
18  
88  
88  
86  
18  
74  
24  
25  
77  
78  
90  
74  
27  
27  
26  
76  
32  
26  
77  
87  
28  
91  
32  
87 26  
101  
101  
31  
29  
26  
30  
76  
95  
18  
98  
18  
30  
31  
28  
85  
95  
84  
35  
29  
95  
95  
29  
36  
74  
29  
33  
37  
38  
39  
40  
85  
74  
40  
39  
38  
37  
34  
36  
35  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
EVO REV 400 ELLIPTICAL TRAINER  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
87  
45  
41  
42  
52  
58  
43  
44  
47  
100  
94  
65  
82  
49 50  
59  
85  
74  
99  
93  
60  
92  
84  
74  
46  
90  
51  
55  
95  
70  
55  
56  
48  
85  
62  
63  
50 49 74  
95  
96  
64  
51  
95  
80  
57  
95  
66  
63  
61  
71  
84  
74  
53  
54  
62  
80  
89  
69  
81  
67  
66  
67  
68  
74  
95  
95  
68  
81  
85  
96  
85  
95  
73  
95  
95  
95  
96  
95  
95  
72  
95  
85  
95  
95  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 1:  
NOTE: First make sure to connect the Upper Computer Wire (103) and Lower Computer Wire (104) as shown below.  
Attach the Front Upright Frame (2) to the Frame (99) and secure using the M10 x 90mm Bolts (78), ID 10mm Curve Washers  
(101) and M10 Head Nuts (98).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 2:  
NOTE: First make sure to connect the Upper Computer Wires (103) and Lower Hand Pulse Wires (106).  
Attach the Computer (1) to the Front Upright Frame (2) using four M6 x 20mm Bolts (105).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 3:  
NOTE: First make sure to connect the Hand Pulse Sensor Wires (21).  
Slide the Handlebar – Left (16) and Handlebar – Right (17) onto the Front Upright Frame (2).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 4:  
Slide the Left Upright (5) on the Front Upright Frame (2) and secure it with an ID 8mm Curved Washer (91) and M8 x 80mm  
Allen Head Bolt (79). Repeat the procedure on the Right Upright (6).  
79  
91  
91  
79  
5
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 5:  
Attach the Left Upright (5) and Right Upright (6) to the Frame (99) and secure using M8 x 60mm Allen Head Bolts (77) and ID  
8mm Curve Washers (91).  
77  
77  
99  
91  
91  
77  
5
77  
6
5
99  
6
91  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 6:  
Slide the20 x 91 x M14mm Bolt (30) through the Pedal Arm – Left (33) and Handlebar – Left (16) and secure with M14 Nut  
(88) using the 8mm Wrench (C), M14 Bushing Tool (A) and 5mm Allen Key (B) as shown.  
A
B
88  
16  
30 33  
C
88  
A
16  
33  
30  
B
C
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 7:  
Slide the 20 x 91 x M14mm Bolt (30) through the Pedal Arm – Right (34) and Handlebar – Right (17) and secure with M14  
Nut (88) using the 8mm Allen Key (C), M14 Nut Bushing Tool (A) and 5mm Allen Key (B) as shown.  
17  
34  
88  
A
30  
B
C
30  
A
88  
17  
34  
B
C
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 8:  
Attach the Pedal Arm Front Pivot Cover (18) to the ends of the Handlebar – Right (17) and Pedal Arm – Right (34). Repeat  
the procedure on the Pedal Arm – Left (33) and Handlebar – Left (16).  
34  
33  
16  
17  
18  
16  
33  
34  
18  
17  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 9:  
Attach the Front Frame Cover – Upper (59) and Front Frame Cover – Lower (60) to the Left Upright (5), Right Upright (6) and  
Frame (99). Secure with Fixing Inserts (85) and M4 x 50mm Screw (100).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 10:  
Attach the Handlebar Cover (13) to the front side of the front side of the Handlebar – Right (17) and secure with M4 x 15mm  
Hard Screws (102). Then attach the Handlebar Inside Cover (14) to the backside of the Handlebar – Right (17) and secure it  
to the Handlebar Cover (13) using M4 x 12mm Screws (97). Repeat the procedure on the Handlebar – Left (16).  
13  
17  
102  
102  
17  
13  
14  
16  
14  
13  
97  
14  
97  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 11:  
Slide the Water Bottle Holders (9) onto the Right Upright (6) and Left Upright (5).  
9
9
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
EVO REV 400 ELLIPTICAL TRAINER  
ASSEMBLY  
STEP 12:  
Slide the Hand Rail Frame – Left (7) through the Water Bottle Holder (9) on the Left Upright (5) and secure with M8 x 15mm  
Bolt (80) as shown in FIG1. Repeat the procedure on the Right Upright (6).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
EVO REV 400 ELLIPTICAL TRAINER  
LEVEL ADJUSTMENT  
LEVEL ADJUSTMENT:  
To adjust the level of the REV400 Elliptical Trainer simply rotate the Level Adjusters right or left to move them in or out of the  
Uprights.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
EVO REV 400 ELLIPTICAL TRAINER  
TRANSPORT INSTRUCTIONS  
TRANSPORT INSTRUCTIONS:  
The casters located on the rear of the unit allow for easy transport. Simply lift the front of the unit until the wheels touch the  
floor. Then roll the unit to a desired location.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
EVO REV 400 ELLIPTICAL TRAINER  
COMPUTER INSTRUCTIONS  
MODE Button  
METRIC/ENGLISH Display  
TIME/DISTANCE/LEVEL Window  
PROFILE Window  
A
C
E
G
I
B
D
F
H
J
STOP Button  
RPM/SPEED/WATTS Window  
PULSE/CALORIES/TENSION Window  
DOWN/UP RESISTANCE Button  
ENTER Button  
START Button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
EVO REV 400 ELLIPTICAL TRAINER  
COMPUTER INSTRUCTIONS  
FUNCTIONS AND BUTTONS  
STOP:  
Press STOP to pause the functions during your exercise program. All the data on the display will freeze. Press START to  
resume the program and all the data displayed will continue until the program has finished.  
START:  
Press START to begin your exercise.  
ENTER:  
Press ENTER to confirm the setting of program.  
MODE:  
Press MODE to switch the display to show the information as RPM/TIME/PULSE or SPEED/DISTANCE/CALORIES or  
WATTS/LEVEL/TENSION (RESISTANCE).  
RESISTANCE UP/DOWN:  
Press UP/DOWN buttons to adjust the resistance.  
SPEED:  
Displays current exercise speed by Km/h or MPH  
LEVEL:  
Displays the current level of intensity of your exercise program.  
CALORIES:  
Count up: this measures total calories burned during exercise.  
Count down: if you have set the number of calories, the computer will count down from that preset number down to zero.  
This data is a guide and should not be used for medical assessment. Please note when setting a target this is in blocks of 10  
from 0 to 990.  
TENSION (RESISTANCE):  
Displays the current tension (resistance) level from 1 to 16.  
DISTANCE:  
Count up: this measures the total distance from 0 to 99.9 Km / Mile.  
Count down: if you have set the target distance, the computer will count down from that preset distance down to zero as soon  
as you start exercising.  
WATT:  
This displays your current wattage output. Watts are displayed from 110W to 350W Please note do not set below 110Watts.  
TIME:  
Count up: the computer measures total exercise time from 00:00 up to 99:00.  
Count down: if you have set the target time, the computer will count down from that preset time down to 0:00.  
HEART RATE:  
This displays your current Heart Rate; you will need to be wearing the chest strap in order for this to be displayed.  
QUICK START:  
When the bike is in the POWER ON status, press the START button to activate the QUICK START program. The TIME,  
DISTANCE and CALORIES will count up when you start exercising.  
PROGRAM:  
To select one of the User programs, you will need to select the USER CODE first. Press the UP/DOWN button to select the  
USER CODE from U1 to U9. This is shown in the PROFILE display. Press the ENTER button to confirm the user code. If the  
user information has been previously input, press ENTER and hold for 3 seconds, the computer will then skip the user  
information set up procedure and enter the program select procedure. To input new information, please follow the procedure  
below:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
EVO REV 400 ELLIPTICAL TRAINER  
COMPUTER INSTRUCTIONS  
HEIGHT set up – After the User Code has been confirmed the USER HEIGHT display will show 170cm/67 inches or the  
previous setting and begin flashing. Press the UP/DOWN button to adjust the user height information, then press ENTER to  
confirm.  
WEIGHT set up – After the HEIGHT has been confirmed the USER WEIGHT display will show 68kg/150lbs or the previous  
setting and begin flashing. Press the UP/DOWN button to adjust the user weight information, then press ENTER to confirm.  
AGE set up – After the WEIGHT has been confirmed the USER AGE display will show 35 or the previous setting and begin  
flashing. Press the UP/DOWN button to adjust the user age information then, press ENTER to confirm.  
P1 TO P9 PROGRAMS SELECTING PROCEDURE  
After setting the USER AGE press ENTER to confirm. Alternatively just press ENTER and hold for 3 seconds after power on.  
The PROFILE display will show P1 flashing. Press the UP/DOWN button, to scroll through P1 to P9, press ENTER to  
confirm the program.  
P1: TARGET TIME  
After you have selected P1 TARGET TIME, the TIME display will show the default time setting of 32:00 minutes. Press the  
UP/DOWN button to adjust target time then press ENTER to confirm. Press START to begin the exercise program.  
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
P2: TARGET DISTANCE  
After you have selected P2 TARGET DISTANCE, the DISTANCE display will show the default distance setting of 5.0  
km/miles. Press the UP/DOWN button to adjust target distance then press ENTER to confirm. Press START to begin the  
exercise program.  
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.  
To pause the program while exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
P3: TARGET CALORIES  
After you have selected P3 TARGET CALORIES, the CALORIES display will show the default calories setting 50. Press the  
UP/DOWN button to adjust target calories then press ENTER to confirm. Press START to begin the exercise program.  
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
P4: RANDOM  
After you have selected P4 RANDOM, the TIME display will show the workout time setting of 32:00 minutes. Press the  
UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise program.  
The RANDOM program has 50 different RESISTANCE based programs. If whilst exercising, you find the level of  
RESISTANCE too intense you can press the UP/DOWN button to decrease the resistance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
EVO REV 400 ELLIPTICAL TRAINER  
COMPUTER INSTRUCTIONS  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
P5: FAT BURNING  
After you have selected P5 FAT BURNING, the TIME display will show the default workout time setting of 32:00 minutes.  
Press the UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise  
program.  
The aim of a FAT BURNING program is to exercise for a longer period of time at a reduced level of intensity. This will allow  
you to burn more calories than if you were using a program that has higher levels of resistance over a shorter period of time.  
Please note: on this particular program once the highest level of resistance is set, the resistance cannot be decreased whilst  
exercising. To decrease the resistance you will need to stop the program and start again.  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
Fat Burning Profile: (If user sets workout time above 16 minutes, the computer will average the workout time in 16  
sections as following “Resistance Profile”, i.e. input 32 minutes, the computer will do 2 minutes each section.  
If user set the workout time less than 16 minutes, the computer will run one minute for one section till time out,  
i.e. input 12 minutes, the computer will just do 12 sections.).  
Resistance  
1
3
7
9
9
9
9
9
9
9
9
9
9
7
3
1
P6: INTERVAL  
After you have selected P6 INTERVAL, the TIME display will show the default workout time setting of 32:00 minutes. Press  
the UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise program.  
The aim of an INTERVAL program is to exercise at levels of LOW and HIGH intensity for short periods of time. There is one  
profile with 8 different levels of Intensity. The resistance will be changed automatically whilst exercising, according to the  
following profile.  
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
EVO REV 400 ELLIPTICAL TRAINER  
COMPUTER INSTRUCTIONS  
Interval Profile: (If user sets workout time above 16 minutes, the computer will average the workout time in 16  
sections as following “Resistance Profile”, i.e. input 32 minutes, the computer will do 2 minutes each section.  
If user set the workout time less than 16 minutes, the computer will run one minute for one section till time out,  
i.e. input 12 minutes, the computer will just do 12 sections.).  
Levels  
Resistance  
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
1
2
3
4
5
6
7
8
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
EVO REV 400 ELLIPTICAL TRAINER  
COMPUTER INSTRUCTIONS  
P7: ENDURANCE  
After you have selected P7 ENDURANCE, the TIME display will show the default workout time of setting 32:00 minutes.  
Press the UP/DOWN button to adjust workout time then press ENTER to confirm. Press START to begin the exercise.  
The aim of an ENDURANCE program is to start at a low level of resistance and then at ever increasing higher levels of  
resistance in order that the body exercises at higher levels of intensity. The profile ends with a lower level of intensity to  
reduce the Heart rate. There is one profile with 8 levels of Intensity. The resistance will be changed automatically whilst  
exercising, according to the following profile.  
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
Endurance Profile: (If user sets workout time above 16 minutes, the computer will average the workout time in 16  
sections as following “Resistance Profile”, i.e. input 32 minutes, the computer will do 2 minutes each section.  
If user set the workout time less than 16 minutes, the computer will run one minute for one section till time out,  
i.e. input 12 minutes, the computer will just do 12 sections.).  
Levels  
Resistance  
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
3
4
3
4
4
5
4
5
5
6
5
6
6
7
6
7
7
7
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
8
8
10  
11  
12  
13  
14  
15  
16  
10  
11  
12  
13  
14  
15  
16  
5
5
6
6
7
7
8
8
9
9
6
6
7
7
8
8
9
9
10  
11  
12  
13  
14  
10  
11  
12  
13  
14  
7
7
8
8
9
9
10  
11  
12  
13  
10  
11  
12  
13  
8
8
9
9
10  
11  
12  
10  
11  
12  
9
9
10  
11  
10  
11  
10  
10  
P8: WATT CONTROL  
After you have selected the P8 WATT CONTROL program, the WATT display will show the default workout watt setting  
110W. Press the UP/DOWN button to adjust workout watts then press ENTER to confirm. Then the TIME display will show  
the default workout time setting 32:00 minutes. Press the UP/DOWN button to adjust workout time then press ENTER to  
confirm. Press START to begin the exercise program.  
The resistance will be changed automatically whilst exercising. The program will change the resistance automatically to  
match the user watts setting.  
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
EVO REV 400 ELLIPTICAL TRAINER  
COMPUTER INSTRUCTIONS  
P9: TARGET HEART RATE  
After you have selected P9 TARGET HEARTRATE, The PULSE display will show the Target Heart Rate base on your age.  
Your Target Heart Rate has been set whilst you were setting USER AGE up with a user number e.g. U1 to U9. Please note  
the user TARGET HEART RATE will be adjusted with the user AGE according to the factory setting. The factory TARGET  
HEART RATE setting is based on 85% of the maximum heart rate. The maximum heart rate is calculated as 220 minus the  
user age. For a 35-year old, the maximum user heart rate should be 185 and 85% of user heart rate. If you wish to alter your  
Target Heart Rate, press the UP/DOWN button to adjust the TARGET HEART RATE. Then the TIME display will show the  
default workout time of setting 32:00 minutes. Press the UP/DOWN button to adjust workout time then press ENTER to  
confirm. Press START to begin the exercise program.  
NOTE: Please always consult your doctor to your proper workout target heart rate.  
To increase or decrease the resistance whilst exercising, press the UP/DOWN button.  
To pause the program whilst exercising, press the STOP button. To resume exercising, press the START button.  
If the STOP button is pressed after pausing the program, the computer returns to Power on Status.  
WARM UP – TARGET HEART RATE  
After completing the TIME set up and starting the program, there is a 3 minute WARM UP program to help you reach the  
minimum target workout heart rate. The resistance will start from 2. If the actual user’s pulse does not reach 65% of the  
maximum heart rate ((220-age) x 65%), the resistance will increase one level every 15 seconds. The computer will detect  
user heart rate per 15 seconds. When the computer detects 2 times that actual pulse rate reaches the minimum target  
workout heart rate, the resistance will stop increasing and continue at the same resistance until the 3 minute warm up is  
complete and then go into the HEART RATE CONTROL main program.  
If you cannot reach the minimum target workout heart rate in 3 minutes, the program will continue the second 3 minute  
WARM UP program. If during the second WARM UP the user still cannot reach the minimum target workout heart rate, the  
computer will continue on to the third WARM UP procedure for 3 minutes. If the third WARM UP program still cannot bring  
up the actual pulse rate to the minimum target workout heart rate, the program will stop and TIME display will show FAIL.  
HEART RATE CONTROL MAIN PROGRAM  
After the actual pulse rate reaches the minimum target workout heart rate and completes the warm up program, the computer  
will go into the main program and the time will count down from the pre-set time. During the main program, the computer will  
detect the user heart rate per 15 seconds. If the actual pulse rate cannot reach the Target Heart Rate, the resistance level  
will be increased by 1 level every 15 seconds until the pulse rate reaches the Target Heart Rate or the resistance level will  
increase by 16 levels. If the actual pulse is higher than the Target Heart Rate, then the resistance will be reduced 1 level  
every 15 seconds until the actual heart rate meets the Target Heart Rate. If the actual pulse is higher than the Target Heart  
Rate over 3 minutes, the computer would stop HEART RATE CONTROL program then begin the COOL DOWN function.  
COOL DOWN – TARGET HEART RATE  
After completing the HEART RATE CONTROL program and the time counts down to zero start the one-minute Cool Down  
program. The TIME display will show ‘COOL’ and start blinking. The resistance will return to level 1 as the time counts down  
from 1:00.  
ENGLISH to METRIC conversion:  
The computer display can show both ENGLISH and METRIC information. If you want to change from ENGLISH to METRIC  
or METRIC to ENGLISH, please follow the procedure below:  
1. When the computer is in the power on status, press and holds the STOP button as 5 seconds. The PROFILE  
display will shows KM or ML.  
2. Press the UP or DOWN buttons to switch between METRIC (KM) or ENGLISH (ML) then press the STOP button to  
confirm the selection and return to POWER ON status.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
EVO REV 400 ELLIPTICAL TRAINER  
WARRANTY  
Warranty Coverage: Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that each new product to be  
free from defects in workmanship and material, under normal use and conditions.  
Period of Coverage: The Warranty on this product runs from the date of your purchase for a period of LIFETIME on the  
frame and magnetic brake, THREE (3) years on all parts and electronics and ONE (1) year on labor. Smooth Fitness  
reserves the right to inspect damaged parts for misuse.  
It is recommended that the Original Receipt be kept with the product manual.  
Remedy Provided by Smooth Fitness: Smooth Fitness will provide a replacement part free of charge if a defect is found  
during the Warranty period. You must pay any charges for shipping and handling outside of the Continental United States  
and for labor. To obtain service call your local Smooth Retailer.  
Any redemption may be by repair or replacement of the affected parts and/or product at the sole discretion of Smooth  
Fitness, by personnel approved by Smooth Fitness. If repairs are required, the unit will be repaired at the location of use or  
by return to the factory as deemed appropriate by Smooth Fitness.  
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to  
the original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth  
Fitness products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the  
circumstances but that the advice is used at your sole risk.  
Procedure for Obtaining Your Remedy Under This Warranty: To obtain service call your local Smooth Retailer. To help  
them assist you, please have the following information ready:  
Model name or number from the cover of the manual;  
Serial number located on the frame of the unit; and  
The part description and the order number.  
Limitations on Warranty: This Warranty will only apply to the original end user. This Warranty does not cover any  
problems, damages or failures that are caused by accident, improper assembly, failure to observe cautionary labels on the  
product, failure to operate the product correctly, abuse or freight damage. Smooth Fitness does not warrant against any  
damage or defects that may result from repair or alterations made to the product by an unauthorized repair facility.  
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product  
shipped or handled outside of the United States or Canada. This Warranty does not apply if the product is used for rental or  
commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.)  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES,  
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN  
DURATION TO ONE (1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT  
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR  
ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS  
WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
For assistance with assembly or to order replacement parts, simply call your local Smooth Retailer. To help them assist you,  
please have the following information ready:  
Model name or number from the cover of the manual;  
Serial number located on the frame of the unit; and  
The part description and order number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
EVO REV 400 ELLIPTICAL TRAINER  
IMPORTANT STEPS  
Warning:  
Before using this product, please consult your personal physician for a complete physical examination. Frequent and  
strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this product, stop  
exercising and consult your doctor. Proper usage of this product is essential. Please read your manual carefully before  
exercising.  
Please keep all children away from the equipment during use and when equipment is unattended.  
Always wear appropriate clothing, including athletic shoes, when exercising. Do not wear loose clothing that could become  
caught during exercising.  
Make sure that all bolts and nuts are tightened when equipment is in use. Periodic maintenance is required on all exercise  
equipment to keep it in good condition.  
Before beginning:  
How you begin your exercise program depends on your physical condition. If you have been inactive for several years, or  
are severely overweight, you must start slowly and increase your time gradually, a few minutes per week.  
Initially you may be able to exercise only for a few minutes in your target zone. However, your aerobic fitness will improve  
over the next six to eight weeks. Don’t be discouraged if it takes longer. It’s important to work at your own pace. Ultimately,  
you’ll be able to exercise continuously for 30 minutes. And the better your aerobic fitness, the harder you will have to work to  
stay in your target zone. But remember these essentials:  
Contact your physician before starting a workout or training program. Have your doctor review your training and diet  
programs to advise you of a workout routine you should adopt.  
Begin your training program slowly with realistic goals that have been set by you and your doctor.  
Supplement your program with some type of aerobic exercise such as walking, jogging, swimming, dancing and/or  
bicycling. Monitor your pulse frequently. If you do not have an electronic heart rate monitor, have your physician  
show you the proper way to manually check your pulse by using your wrist or neck. Establish your target heart rate  
based on your age and condition.  
Drink plenty of fluids during the course of your routine. You must replace the water content lost from excessive  
exercising to avoid dehydration. Avoid drinking large amounts of cold liquids. Fluids should be at room temperature  
when consumed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
EVO REV 400 ELLIPTICAL TRAINER  
TARGET HEART RATE  
Finding your pulse:  
To make sure your heart is beating in its target zone, you’ll need to know how to monitor your heart rate. The easiest way is  
to feel the pulse in the carotid artery on either side of your neck, between the windpipe and the large neck muscles. Count  
the number of beats in ten seconds, and then multiply that number by six. This gives you the number of beats per minute.  
How fast should your heart beat during aerobic exercise? Fast enough to reach and stay in its “target zone,” a range of beats  
per minute that is largely determined by your age and physical condition. To determine your target zone, consult the chart  
we have provided.  
FIND YOUR TARGET HEART RATE  
200  
180  
160  
140  
120  
100  
80  
20  
25  
30  
35  
40  
45  
50  
55  
60  
65  
70  
AGE IN YEARS  
ADVANCED: Sports, athletic conditioning or interval training  
FITNESS: Optimal training, aerobic or cardiovascular  
HEALTH: Beginner, low intensity with long duration produces fat burning  
Aerobic exercise:  
Is any sustained activity that sends oxygen to your muscles via your heart and lungs. It will improve the fitness of your lungs  
and heart: your body’s most important muscle. Aerobic fitness is promoted by any activity that uses your large muscle  
groups - arms, legs or buttocks, for example. Your heart beats quickly and you breathe deeply. An aerobic exercise should  
be part of your entire exercise routine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
EVO REV 400 ELLIPTICAL TRAINER  
MUSCLE CHART  
Targeted muscle groups:  
The exercise routine that is performed on this product will develop the upper and lower body muscle groups. These muscle  
groups are shown in gray color on the chart below.  
Shoulder muscles  
Bicep muscle  
A
C
E
G
I
B
D
F
H
J
Pectoral muscles  
Abdominal muscles  
Quadricep muscles  
Trapezius muscles  
Back muscles  
Forearm muscles  
Calf muscles  
Tricep muscles  
Gluteal muscles  
K
L
Hamstring muscles  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
EVO REV 400 ELLIPTICAL TRAINER  
STRETCHING ROUTINE  
Warm up and cool down:  
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two  
and preferably three times a week, resting for a day between workouts. After several months, you can increase your  
workouts to four or five times per week.  
Warming up is an important part of your workout, and should begin every session. It prepares your body for more strenuous  
exercise by heating up and stretching out your muscles, increasing your circulation and pulse rate, and delivering more  
oxygen to your muscles. At the end of your workout, repeat these exercises to reduce sore muscle problems. We suggest  
the warm-up and cool-down exercises on the following pages:  
Toe Touch:  
Slowly bend forward from your waist, letting your back and shoulders relax as you  
stretch toward your toes. Reach down as far as you can and hold for 15 counts.  
Shoulder Lift:  
Lift your right shoulder up toward your ear for one count. Then lift your left  
shoulder up for one count as you lower your right shoulder.  
Head Roll:  
Rotate your head to the right for one count, feeling the stretch up the left side of  
your neck. Next, rotate your head back for one count, stretching your chin to the  
ceiling and letting your mouth open. Rotate your head to the left for one count,  
and finally, drop your head to your chest for one count.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
EVO REV 400 ELLIPTICAL TRAINER  
STRETCHING ROUTINE  
Hamstring Stretch:  
Sit with your right leg extended. Rest the sole of your left foot against your right  
inner thigh. Stretch toward your toe as far as possible. Hold for 15 counts. Relax  
and then repeat with left leg extended.  
Inner Thigh Stretch:  
Sit with the soles of your feet together with your knees pointing outward. Pull your  
feet as close into your groin as possible. Gently push your knees towards the  
floor. Hold for 15 counts.  
Side Stretch:  
Open your arms to the side and continue lifting them until they are over your head.  
Reach your right arm as far upward toward the ceiling as you can for one count.  
Feel the stretch up your right side. Repeat this action with your left arm.  
Calf-Achilles Stretch:  
Lean against a wall with your left leg in front of the right and your arms forward.  
Keep your right leg straight and the left foot on the floor; then bend the left leg and  
lean forward by moving your hips toward the wall. Hold, and then repeat on the  
other side for 15 counts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smooth Fitness  
112 Gaither Drive  
Mt. Laurel, NJ 08054  
Toll Free Customer Service:  
1.888.800.1167  
Website:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ecom Instruments PDAs Smartphones 2880 mAh User Manual
Eton Weather Radio ESP2100 User Manual
Fender Car Speaker 412 SL User Manual
First Virtual Communications Sewing Machine 2026 User Manual
FoodSaver Food Saver V3800 User Manual
Gamber Johnson Laptop Docking Station CF53 User Manual
GE Air Conditioner AVX08 User Manual
GE Fax Machine UX CL 220 User Manual
Gianni Industries Door DK 100 User Manual
Gianni Industries Power Supply PSB3A 2A 115 User Manual