Cypress Computer Hardware CY3261A RGB User Manual

®
PSoC FirstTouch™ Embedded Design Starter Kit  
Easy and Affordable Starter Kit to Accelerate Mixed-Signal Embedded Application Development  
The Cypress PSoC FirstTouch starter kit provides a quick, easy, and affordable way for embedded customers to evaluate the integration, flexibility, and real  
mixed-signal programmability of PSoC mixed-signal arrays. Without writing a single line of C or Assembly code, you can experience the power of PSoC mixed-  
signal arrays. Right-out-of-the box you can see a single PSoC device perform several designs — Cypress CapSense™ touch sensing, temperature sensing,  
light sensing, and CapSense™ proximity sensing. And with Cypress’s PSoC Express visual embedded system design tool, you can modify these designs as  
you wish or even create your own applications.  
ADVANTAGES - Embedded Designs Available for Use Right Out of the Box  
Highly Integrated Programmable Kit Optimized for Embedded Applications  
Rapid Time to Market for Embedded Applications  
— Integrates four embedded applications in a single thumbdrive form factor  
— General purpose I/O pins accessible for further evaluation and development  
— Detachable multifunction expansion card enables adding PSoC functionality to existing  
system boards  
— Design embedded control applications in minutes  
— No C or Assembly code necessary with PSoC Express design software  
— Accommodates last-minute design changes  
— Real mixed-signal programmability provides complete analog and digital functionality  
on-chip  
— USB connectivity for convenient plug and play operation  
C
Design  
Functionality  
Applications  
White goods, handsets, consumer  
electronics, computers and  
computer peripherals  
Controls LED color depending  
on a finger’s position on the  
CapSense touch sensing slider  
Controls LED color and buzzer  
based on ambient temperature  
variation  
Air conditioning, alarm systems,  
system and industrial fan control  
Controls LED intensity based  
on ambient light variation  
Consumer electronics, PCs,  
monitors, mobile phones  
for more information.  
Controls LED color based on  
proximity to a proximity sensor  
White goods, handsets, consumer  
electronics, computers, and  
computer peripherals  
428-2018-ND FirstTouch™ Starter Kit $37.16  
®
®
PSoC Mini Programming Kit  
PSoC Development Kit  
CY3215-DK:  
This evaluation kit allows a user to program PSoC devices via the MiniProg programming unit. A MiniEval  
board is also included in the kit. The MiniEval board is programming and evaluation board which allows  
socket programming of DIP devices. The MiniEval also includes LEDs and a POT for simple evaluation  
and demonstration, but does not include a prototyping area. The MiniProg1 utilizes a 5-pin ISSP header to  
program PSoC Devices on the MiniEval board or directly on a users target board.  
The PSoC Development Kit includes an In-Circuit Emulator (ICE) which consists of a base unit, USB 2.0  
cable, and power supply. The base unit is connected to the host PC via the USB port. The ICE is driven by  
the Debugger subsystem of PSoC Designer. This software interface allows the user to run, halt, and single  
step the processor. It also allows the user to set complex event points. Event points can start and stop  
the trace memory on the ICE, as well as break the program execution. In addition to the Development Kit,  
different Emulation Pods are available to support the range of devices in the PSoC family. The ICE-cube also  
serves as a single-site device programmer via an ISSP (In-System Serial Programming) Cable and MiniEval  
board included in the kit. The MiniEval board is a programming and evaluation board that connects to the  
ICE-Cube via an ISSP Cable and allows programming of DIP devices. There are also other Programming  
boards available for programming other packages.  
CY3210-MiniProg1 Kit Includes:  
• MiniProg Programming Unit • MiniEval Socket Programming and Evaluation Board • Device Samples  
• Cable • Software  
CY3217 Kit Includes:  
System Requirements:  
• MiniProg Programming Unit • USB Cable • Software  
• 500MHz Processor • 256MB Ram • 150MB Free Space • USB Port • Windows®, NT4.0, 2000, Me, XP  
• Internet Explorer 6.0 • Adobe Acrobat Reader  
428-1585-ND  
428-2021-ND  
MiniProg1 Demo Board..................................................................$71.60  
MiniProg Demo Board ...................................................................$30.59  
Development Kit Includes:  
• ICE-Cube Unit • Emulation Pod for CY8C29466-24PXI • CY8C29466-24PXI Samples • PSoC Designer  
Software CD • ISSP Cable • MiniEval Socket Programming and Evaluation board • Backward compatibility  
cable (for connecting to legacy Pods) • Power Supply European Plug Adapter • USB 2.0 Cable • Getting  
Started Guide • Development Kit Registration form • Image Craft C-Compiler License  
®
PSoC Evaluation Kit  
428-1583-ND Development Kit for PSoC .............................................................. $496.33  
CY3210-PSoCEval1:  
The PSoC Evaluation Kit features an evaluation board and MiniProg1 Programming unit. The evaluation  
board includes an LCD module, Potentiometer, LEDs and plenty of bread boarding space to meet all of your  
evaluation needs. The MiniProg1 programming unit will program PSoC devices directly on the evaluation  
board, or on other boards via a 5-pin header. The MiniProg1 is small and compact, and connects to the  
users PC via a provided USB 2.0 Cable  
CapSense™ Successive Approximation  
(CSA) Training Kit  
CY3203A-CAPSENSE:  
Kit Includes:  
The CY3203A CapSense Training Kit includes software, hardware and example projects to help designers  
learn how to implement PSoC® CapSense in their own design using the CY8C20x34 family. A training board  
is included that is hardwired for buttons and sliders as well as LCD control and I2C communication.  
• Evaluation board with LCD module • MiniProg1 Programming unit • PSoC Designer Software CD  
• CY8C29466-24PXI Samples • USB 2.0 Cable • Getting Started Guide  
428-1584-ND Evaluation Kit for PSoC with MiniProg1 ................................................ $142.70  
Kit Includes:  
• Training Board (CY8C20x34) • PSoC Designer and Example Project CD • CSA User Module • Mini  
Programmer Unit • LCD Module • USB Cable  
428-1924-ND Evaluation Kit for CapSense CSA ...................................................... $110.42  
EZ-Color™ Evaluation Kit  
CY3261A-RGB:  
CapSense™ Sigma-Delta  
(CSD) Training Kit  
The CY3213A CapSense Training Kit includes software, hardware and example projects to help designers  
learn how to implement PSoC® CapSense in their own design using the CY8C21x34 family. A training board  
is included that is hardwired for buttons and sliders as well as LCD control and I2C communication.  
The CY3261A-RGB board is a preprogrammed HB LED color mix board with seven pre-set colors using the  
CY8CLED16 EZ-Color HB LED Controller. The board is accompanied by a CD containing the color selector  
software application, PSoC® Express 3.0, PSoC Programmer, and a suite of documents, schematics, and  
firmware examples. The color selector software application can be installed on a host PC and is used to  
control the EZ-Color HB LED controller using the included USB cable. The application enables you to select  
colors via a CIE 1931 chart or entering coordinates.  
CY3213A-CAPSENSE:  
Kit Includes:  
Kit Includes:  
• Training Board (CY8C21x34) • PSoC Designer and Example Project CD • CSD User Module • Mini  
Programmer Unit • LCD Module • USB Cable  
• RGB Industrial Lighting Demo Board • Power Supply • Software • Documentation  
428-1953-ND Evaluation Kit for EZ-Color .............................................................. $184.89  
428-1925-ND Evaluation Kit for CapSense Sigma Delta.............................................. $110.42  
Free shipping on orders over $200 CAD! All prices in Canadian dollars and include duty and brokerage fees.  
1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380  
(C091) 683  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
PSoC Express Development Kit  
CapSense™ Proximity Detection  
Demonstration Kit  
CY3210-ExpressDK:  
The PSoC Express development kit provides a feature-rich hardware platform for developing and testing  
designs created with PSoC Express. This kit contains a complete PSoC Express development environment  
including a large, full featured development board, fan modules, proto modules, 28-DIP samples, and a  
MiniProg Programmer.  
CY3235-PROXDET:  
The CapSense Proximity Detection Demonstration Kit allows quick and easy demonstration of a PSoC®  
CapSense-enabled device (CY8C21434) to accurately sense the proximity of a hand or finger along the  
2
length of a wire antenna. The kit also includes the I C to USB Bridge, which allows hardware and software  
Kit Includes: • Development Board • Four Fan Modules • Two Proto Modules • MiniProg Insystem  
Programmer • MiniEval PCB Evaluation Board • Power Supply • PSoC Express CD-ROM • Jumper Wire Kit  
• Cables • PSoC DIP Samples  
2
debugging of PSoC applications by seamlessly connecting your PC’s USB port to your application’s I  
interface.  
C
2
Kit Includes: • Proximity Detection Demo Board with Antenna • I C to USB Debugging/Communication  
428-1636-ND  
428-1637-ND  
428-1638-ND  
PSoC Express Development Kit ........................................................ $957.94  
Fan Module Kit........................................................................... $248.17  
Proto Module Kit ......................................................................... $124.09  
Bridge • USB Cable • Software • Quick Start Guide  
428-1909-ND  
Evaluation Kit for PSoC Proximity Detection .......................................... $91.00  
®
PSoC CapSense™ Kits  
®
PSoC Express II Evaluation Kit  
C
CY3220-FPD:  
CY3210-PSOCEXPEVAL1:  
The PSoC Express Evaluation Kit is an all-in-one evaluation kit for experiencing first-hand the speed and  
depth of design offerings with PSoC Express, the code-free embedded development environment.  
This PSoC Demonstration Kit features a discrete button demonstration board for the Cypress CapSense  
solution. The board features eight CapSense buttons that control an LCD Module in a car radio configuration.  
The board is built using the CY8C21534-24PVXI PSoC, the only component necessary for sensing. The  
PSoC senses the presence of a finger or other capacitive element through 3mm ABS plastic.  
Kit Includes: • Two PSoC Evaluation boards • MiniProg USB Programmer • Cables • Software  
Kit Includes: • Demonstration Board • User Guide • Documentation and Software CD • Power Supply  
428-1906-ND  
428-2025-ND  
Evaluation Kit for PSoC Express ...................................................... $120.36  
Evaluation Kit for PSoC Express II .................................................... $151.38  
CY3212-CAPSENSE:  
This PSoC Training Kit includes software, hardware and example projects to help designers learn how to  
implement PSoC CapSense in their own design. A training board is included that is hard wired for buttons  
and sliders as well as LCD control and 12C communication.  
®
Kit Includes: • Training board • PSoC Designer and Example Project CD • CSR User Module • Mini  
PSoC with USB Evaluation Kit  
Programmer unit • LCD Module • USB Cable  
Special features of the board include both USB and capacitive touch sense development and debugging  
support. The evaluation board also includes an LCD module, Potentiometer, LEDs, an enunciator, and plenty  
of bread boarding space to meet all of your evaluation needs.  
The PSoCEvalUSB board features an on-chip debugger and can be connected directly to an ICE-Cube  
(available in the CY3215-DK) for full-featured, in-circuit emulation and debugging.  
428-1652-ND  
428-1705-ND  
PSoC CapSense Demo Kit (CY3220-FPD)........................................... $126.57  
PSoC CapSense Training Kit (CY3212-CAPSENSE) ................................ $145.18  
Kit Includes:  
PSoCEvalUSB Board  
LCD Module  
MiniProg1 programmer  
USB mini cable  
CapSense™ Express Evaluation Kits  
• Documentation and Software  
The CapSense Express evaluation kits enable designers to replace mechanical buttons by implementing  
touch sensing designs in minutes with the newest CapSense Touch Sensing Family, CapSense Express.  
With Cypress’s PSoC Express™ visual embedded system design tool and CapSense Express configuration  
tool, designers configure, monitor, and tune up to 10 I/O’s for buttons, LEDs and other general purpose I/O’s  
428-1650-ND Evaluation Kit for CY8C24794-24LFXI................................................ $122.83  
2
over I C in a real time using a graphical user interface.  
CY3202-C iMAGEcraft C-Compiler  
The CY3202-C iMAGEcraft C-Compiler is fully integrated into the PSoC® Designer IDE. PSoC Designer  
supports C source level debugging. In order to activate the compiler, you must enable and upgrade.  
CY3218-CAPEXP1 Kit Includes: • CapSense Evaluation Board with CY8C20110-LDX2I • CY3240-I2USB  
Bridge Board • USB Cable • Battery  
Features: • ANSI C-Compiler • Supports In-line Assembly and can Interface with Assembly Modules  
• Stack-Based • 7 Basic Data Types • Assemble and Linker • Math and String Libraries • C-Interrupt  
Service Routines • Librarian  
CY3218-CAPEXP2 Kit Includes: • CapSense Slider Evaluation Board with CY8C201A0-LDX2I • CY3240-  
I2USB Bridge Board • USB Cable • Battery  
CY3218-CAPEXP3 Kit Includes: • CapSense Evaluation Board with CY8C20142-SX2I • CY3240-I2USB  
Bridge Board • USB Cable • Battery  
428-1413-ND  
iMAGEcraft C-Compiler................................................................ $208.46  
428-2043-ND  
428-2044-ND  
428-2045-ND  
CapSense Evaluation Board Kit (CY3218-CAPEXP1) ................................ $65.14  
CapSense Slider Evaluation Board Kit (CY3218-CAPEXP2) ......................... $65.14  
CapSense Evaluation Board Kit (CY3218-CAPEXP3) ................................ $65.14  
®
PSoC ISSP (In-System Serial  
Programming) Programmer  
The ISSP Programmer programs PSoC ICs with .hex files created with Cypress SemiConductor PSoC  
Designer™ software. The programmer programs a PSoC chip mounted on your PCB, one at a time. It  
connects to your PCB with a 5-wire cable and to your PC with a USB cable. Programming operation can be  
automated by incorporating the programmer into a PC-based test system. The tester software communicates  
with the programmer-control software through a command-line interface. The ISSP programmer can also be  
Universal CapSense™ Controller Kit  
CY3280-BK1:  
Designed for easy development and debugging of any CapSense design. It includes pre-defined control  
circuitry and plug-in hardware, along with controller boards for both the CY8C20x34 and CY8C21x34 PSoC  
devices. It also offers a breadboard module and a module for implementing up to five buttons and a slider  
with sample overlays to encompass a wide variety of designs.  
®
operated manually using the supplied Windows GUI software.  
Functions: • Program • Verify • Read • Flexible Connections to Target PSoC Devices: Devices can be  
inserted directly into ISSP, using an on-board 48-ZIF socket, connected via a test fixture or programmed  
in-system on a product circuit board.  
Kit Includes: • Universal Capsense Controller Boards • CapSense Linear Slider Module • CapSense  
Protyping Module • CY3240-I2USB Board • CY3210 MiniProg1 Programmer • Software  
System Requirements: • Windows®, NT, ME, 2000 or XP • CD-ROM • USB Port • 128 MB RAM  
428-2033-ND  
Universal CapSense Controller Kit ................................................... $219.63  
Kit Includes: • ISSP Programmer • ISSP Software CD-ROM • 6-Foot USB Cable • 2-Foot Programming  
Cable • 9V Power Supply • In-System Serial Programming (ISSP) CY3207ISSP User Guide  
428-1495-ND  
PSoC USB In-System Programmer ................................................... $439.26  
®
2
PSoC I C to USB Bridge Kit  
CY3240-I2USB:  
2
2
®
The I C to USB Bridge is a quick and easy link from any design or application’s I C bus to a PC via USB  
for design testing, debugging and communication. The bridge is based on 1 of Cypress’ CY8C24894, which  
contains 6 analog blocks supporting ADCs, DACs and filters, 4 digital blocks supporting PWMs, timers and  
counters, and a Full-Speed USB 2.0 peripheral.  
PSoC SD Card Module Evaluation Kit  
CY3210-SDCARD:  
The SD Card Module Evaluation Kit assesses the PSoC SD Card user module’s ability to quickly and easily  
write to, read from and seamlessly integrate an SD card module into an embedded design. SD flash memory  
technologies are quickly becoming the preferred solution for portable, consumer and industrial electronic  
devices around the world for storing a large amount of information in a small, durable, portable form factor.  
Note: The SD Card user module and the example projects for this evaluation kit require the use of a C  
compiler.  
Kit Includes:  
2
2
• I C USB Bridge • I C Slave Demonstration Board • USB Mini B Cable • Software CD  
2
428-1910-ND  
Evaluation Kit for PSoC I C to USB ................................................... $96.80  
Kit Includes: • CY3210-PSoCEVAL • SD Card Adapter Board • SD Memory Card • USB to SD Card  
®
Reader • MiniProg1 • USB Cable • Power Supply • Software  
2
PSoC I C Port Expander Evaluation Kits  
2
428-1907-ND  
Evaluation Kit for PSoC SD Card...................................................... $322.62  
The I C Port Expander Evaluation Kit allows you to easily assess the following value propositions of  
Cypress’ I C port expander ICs from other vendors and flexibly integrates I/O expansion, PWM functions  
and user EEPROM. The kit also includes the I C to USB Bridge, which allows hardware and software  
debugging of PSoC applications by seamlessly connecting your PC’s USB port to your application’s I  
interface.  
2
2
2
C
PIR Motion Detection Evaluation Kit  
®
The CY3236A-PIRMOTION EVK allows you to evaluate Cypress’ PSoC device’s ability to control a  
CY3242-IOX Kit Includes:  
Pyroelectric Infrared (PIR) sensor to implement motion sensing applications such as automatic lighting  
controls, automatic door openers, security systems, kiosk wake-up and activating wireless cameras. The  
CY3236A-PIRMOTION EVK includes all of the software, hardware, example projects and documentation  
you need to implement all of these PIR sensing control functions in one flexible and powerful PSoC device,  
the CY8C27443.  
2
• Port Expander Demo Board using containing CY8C9520/40/60 Port Expanders • I C to USB Bridge  
• USB Cable • Documentation  
CY3242-IOXLITE Kit Includes:  
2
• I C Port Expander Demo Board using CY8C9520 Port Expander • USB Cable • Documentation  
Kit Includes: • PIR Motion Sensor Board • Power Supply • Software • Design Files  
428-1911-ND  
428-2023-ND  
CY3242-IOX Evaluation Kit ........................................................... $800.35  
CY3242-IOXLITE Evaluation Kit ...................................................... $160.07  
428-2022-ND  
PIR Motion Evaluation Kit.............................................................. $160.07  
Free shipping on orders over $200 CAD! All prices in Canadian dollars and include duty and brokerage fees.  
1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380  
(C091) 685  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
For use with the 428-1583-ND (CY3215-DK) PSoC Development Kit  
Emulation Kits and Accessories  
Emulation Kits  
Pod Kits  
Digi-Key  
Part No.  
428-1997-ND  
428-1998-ND  
428-1999-ND  
428-2000-ND  
Price  
Each  
152.62  
152.62  
152.62  
152.62  
Family  
Function: Provides Connection Between ICE-Cube and Target  
Contents: 1 Flexcable, 1 Pod, 2 Pod Feet  
Function: Replacement Pod Kit  
Contents: 2 Pods  
CY8C24x23  
CY8C24x94  
CY8C27x43  
CY8C29x66  
Digi-Key  
Part No.  
Price  
Each  
Digi-Key  
Part No.  
Price  
Each  
For Use With  
For Use With  
CY8C21x23  
CY8C21x23 QFN Package  
CY8C21x34  
428-1886-ND  
428-1871-ND  
428-1887-ND  
428-1872-ND  
428-1883-ND  
246.92  
246.92  
246.92  
246.92  
246.92  
CY8C21x23  
428-1904-ND  
162.55  
162.55  
140.64  
162.55  
162.55  
CY8C21x23 QFN Package 428-1881-ND  
CY8C21x34 428-1905-ND  
CY8C21x34 QFN Package 428-1882-ND  
CY8C24x23A 428-1901-ND  
Foot Kits  
CY8C21x34 QFN Package  
CY8C24x23A  
Function: Replacement Pod Feet Contents: 4 Pod Feet  
CY8C24x23A QFN Package 428-1868-ND  
246.92  
246.92  
246.92  
246.92  
246.92  
CY8C24x94 QFN Package  
CY8C27xxx  
428-1867-ND  
428-1884-ND  
428-1869-ND  
428-1885-ND  
Digi-Key  
Part No.  
Price  
Each  
Package  
CY8C27xxx QFN Package  
CY8C29xxx  
C
8-DIP  
20-DIP  
28-DIP  
8-SOIC  
16-SOIC  
428-1890-ND  
428-1888-ND  
428-1889-ND  
428-1894-ND  
428-1891-ND  
117.87  
135.25  
117.87  
135.25  
135.25  
CY8C24x94 QFN Package 428-1877-ND  
CY8C27xxx 428-1902-ND  
CY8C27xxx QFN Package 428-1879-ND  
CY8C29xxx 428-1903-ND  
162.55  
140.61  
162.55  
162.55  
162.55  
CY8C29xxx QFN Package  
CY8C20334 QFN Package  
CY8C20434 QFN Package  
428-1870-ND  
428-1955-ND  
428-1957-ND◆  
246.92  
286.64  
286.64  
RoHS Compliant  
20-SOIC  
28-SOIC  
20-SSOP  
28-SSOP  
48-SSOP  
428-1892-ND  
428-1893-ND  
428-1895-ND  
428-1896-ND  
428-1897-ND  
135.25  
117.87  
117.47  
117.87  
117.46  
CY8C29xxx QFN Package 428-1880-ND  
Evaluation Pods  
Function: Allows evaluation of a device family using  
CY8C20334 QFN Package 428-1956-ND◆  
CY8C20434 QFN Package 428-1958-ND◆  
162.55  
162.55  
28-DIP connector  
44-TQFP  
100-TQFP  
24-QFN  
32-QFN  
48-QFN  
56-QFN  
428-1899-ND  
428-1898-ND  
428-1873-ND  
428-1874-ND  
428-1875-ND  
428-1876-ND  
135.25  
317.97  
244.45  
210.93  
210.93  
210.93  
Digi-Key  
Part No.  
428-1994-ND  
428-1995-ND  
428-1996-ND  
Price  
Each  
152.62  
152.62  
152.62  
Family  
Replacement Flex Cable  
C48C20x34  
C48C21x23  
C58C21x34  
for CY3250 Pod Kits  
428-1866-ND  
124.07  
RoHS Compliant  
CPLDs  
Cypress offers a wide range of Programmable Logic Devices From PALs with 10 macrocells and 200 gates all input pins to the logic block inputs. All of the Ultra37000 devices are electrically erasable and In-System  
up to CPLDs with 3072 macrocells and 200,000 gates. Cypress also provides voltages ranging from 2.5V up Reprogrammable (ISR).  
to the typical 5.0V.  
The Delta39K™ ISR™ CPLD Family based on a 0.18 μm, six-layer metal CMOS logic process, offers a wide  
The Ultra37000™ family of CMOS CPLDs provides a range of high-density programmable logic solutions with range of high-density solutions at unparalleled system performance. The Delta39K family is designed to  
unparalleled system performance. The Ultra37000 family is designed to bring the flexibility, ease of use, and combine the high speed, predictable timing, and ease of use of CPLDs with the high densities and low power  
performance of the 22V10 to high-density CPLDs. The architecture is based on a number of logic blocks that of FPGAs. With devices ranging from 15,000 to 200,000 usable gates, the family features devices ten times  
are connected by a Programmable Inter-connect Matrix (PIM). Each logic block features its own product term the size of previously available CPLDs. Even at these large densities, the Delta39K family is fast enough to  
array, product term allocator, and 16 macrocells. The PIM distributes signals from the logic block outputs and implement a fully synthesizable 64-bit, 66-MHz PCI core.  
Memory  
Type  
Option  
Power  
Digi-Key  
Part No.  
Price Each  
25  
Cypress  
Part No.  
Voltage  
Tpd (ns)  
Macrocells  
Gates  
I/O  
Package  
1
100  
ULTRA 37000 CPLDs  
6
6
7.5  
7.5  
6
64  
64  
192  
256  
64  
2,000  
2,000  
5,700  
7,700  
200  
Standard  
Standard  
Standard  
Standard  
Standard  
69  
100-TQFP  
44-TQFP  
160-TQFP  
160-TQFP  
100-TQFP  
428-1722-ND  
428-1723-ND  
428-1724-ND  
428-1725-ND  
428-1936-ND  
12.20  
9.93  
28.11  
40.20  
13.34  
10.99  
7.95  
26.24  
37.53  
12.01  
9.74 CY37064P100-125AXC  
6.71 CY37064P44-125AXC  
24.36 CY37192P160-125AXC  
34.85 CY37256P160-125AXC  
10.65 CY37064P100-125AXI  
37  
125  
133  
69  
5.0  
Flash  
3.3  
Flash  
Flash  
8.5  
64  
200  
Standard  
37  
44-TQFP  
428-1937-ND  
9.93  
7.95  
6.71 CY37064VP44-100AXC  
DELTA 39K ISR CPLDs  
136 208-PQFP  
2.5 ~ 3.3  
7.2  
512  
30K  
Lp  
428-1939-ND  
60.98  
56.92  
52.85 CY39030V208-125NTXC  
Delta39K/Ultra37000 ISR Programming Kit  
The Delta39K/Ultra37000 ISR Programming Kit enables users to program Ultra37000, Ultra37000V, Features: • Supports Cypress’ Ultra37000™, Ultra37000V™, Delta39K™, and PSI™ families of products  
• STAPL (chain dependent and chain independent) programming language support • SVF programming  
language support • Standard JTAG programming interface • Multi-device programming • Easy to use  
interface that is compatible with Windows XP™, Windows 2000™, Windows ME™, Windows98™, and  
Windows NT™ • Elimination of programming insertion which improves manufacturing efficiency, ability to  
program in the lab, on the manufacturing floor and at remote sites • Automatic test equipment (ATE) support  
via STAPL on ATE platforms.  
Delta39K, and PSI CPLDs on board with our ISR Programming Software, the USBISR Programming Cable,  
and a personal computer. The USBISR Programming Cable connects to a USB 1.1USB 2.0 of a PC into a  
standard 10-pin male connector mounted on the user’s board. The ISR software provides an easy-to-use  
Graphical User Interface that accepts JEDEC or hex files as input. The JEDEC/.hex files are used to compose  
platform independent STAPL.SVF files. STAPL/SVF files contain all the information needed to program the  
device. The ISR software is used to define how many devices are in the daisy chain and what operation is to  
CY3950I Includes:  
be done on each Cypress device. The same chain can be used with other JTAG-compliant devices. The ISR UltraISR™ Programming Cable for use with Ultra37000, Delta39K, and PSI CPLD families, ISR Programming,  
ISR Application Notes, and a Delta39K/Ultra37000™ Prototype Board.  
User’s Guide describes the operation of the ISR software. The application notes included with the kit describe  
all system design considerations for programming with this Programming Kit.  
428-2019-ND  
ISR Programming Kit.................................................................... $127.81  
FTG Programming Kits  
CY3670  
CY3672-USB  
The CY3672 programming kit enables any user with a PC the ability to program Field Programmable Clock  
generators quickly and easily. The only two setup requirements are a power connection and a parallel port  
connection with the PC.  
The CY3670 FTG programming kit provides users with a PC the ability to program Cypress EPROM Field-  
Programmable Clock Generators quickly and easily. The two setup requirements are a power connection and a  
serial port connection with the PC.  
Features: • Supports multiple Cypress EPROM Field Programmable Clock Generators: CY2071AF, CY2291F,  
CY2292F, CY2292FZ, CY2907F8, and CY2907F14 • Separate device-specific socket adapters • Allows  
quick and easy prototyping • Compact design for ease of portability • Easy to use interface: Windows  
compatible • User-friendly CYClocks™ software for JEDEC file development  
Kit Includes: • Programmer Unit • Serial Port Cable • AC/DC Adapter • CD containing • CyClocks Software  
• CY_FTG_V2 Programmer Software • Data sheets of supported devices • Device-specific socket adapters for  
the CY2071AF and CY2292F (socket adapters for the other devices are ordered separately)  
Features:  
Supports Field Programmable Clock Generators: CY2077FS, CY2077FZ, CY22050F, CY22150F,  
CY22381F, CY22392F, CY22393F, CY22394F, and CY22395F • Allows quick and easy prototyping  
• Compact design for ease of portability • Easy to use Windows 95, 98, NT,2K, ME, XP compatible interface  
• User friendly CYClocksRT™ software for JEDEC file development  
Kit Includes:  
• Parallel Port cable • AC/DC adapter • CD containing: CyClocksRT, CY3672 programmer interface software,  
and data sheets  
428-1457-ND  
428-2042-ND  
FTG Programming Kit .................................................................. $477.73  
Socket Adapter for CY2071AF......................................................... $162.55  
428-1918-ND  
FTG Programming Kit ................................................................... $477.73  
Free shipping on orders over $200 CAD! All prices in Canadian dollars and include duty and brokerage fees.  
686 (C091)  
1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7C6XXX Series Of USB Microcontrollers  
Cypress offers the industry’s broadest line of USB microcontrollers, as well as a full set of development tools, supporting The CY7C65 Series offers high-performance, fixed-function Universal Serial Bus (USB) hub devices which comply with USB  
cost-driven applications such as keyboards and mice, as well as high-performance applications like printers, scanners, xDSL Specification, Revision 1.1. Up to four downstream USB ports are available to expand the USB attachment points available in  
modems, and digital cameras. Cypress has a wide range of solutions for Low-Speed USB applications, Full-Speed USB your PC system. These self-contained devices require no firmware development for your design, thereby reducing the design  
Applications and USB Hub Applications. Temperature range, commercial (0°F ~ 70°F).  
risk associated with some microcontroller solutions. These Application-Specific Standard Products (ASSP) can improve  
time-to-market in a number of USB designs, including standalone hubs, motherboard hubs, and monitor hubs.  
The CY7C63xxx is a family of 8-bit RISC One Time Programmable (OTP) microcontrollers. In addition, the microcontroller  
features 96 ~ 256 bytes of internal RAM depending on the device. The Cypress USB Controller accepts a 6MHz ceramic The CY7C68001 (EZ-USB SX2) USB interface device is designed to work with any external master, such as standard  
resonator as its clock source. This clock signal is doubled within the chip to provide a 12MHz clock for the microprocessor.  
microprocessors, DSPs, ASICs, and FPGAs to enable USB 2.0 support for any peripheral design. SX2 has a built-in USB  
transceiver and Serial Interface Engine (SIE), along with a command decoder for sending and receiving USB data. The  
controller has four endpoints that share a 4KB FIFO space for maximum flexibility and throughput, as well as Control  
Endpoint 0. SX2 has three address pins and a selectable 8- or 16- bit data bus for command and data input or output.  
The CY7C64013 is an 8-bit One Time Programmable microcontroller that is designed for full-speed USB applications. The  
instruction set has been optimized specifically for USB operations, although the microcontrollers can be used for a variety of  
non-USB embedded applications.  
The SL811HS is a single-chip, dual-speed USB Embedded Host controller that can operate as either a USB Host or USB  
peripheral device. The SL811HS can interface to devices such as microprocessors, microcontrollers, DSPs or directly to a  
variety of buses such as ISA, PCMCIA and others.  
The CY7C647XX (EZ-USB FX1™) is a family of full-speed highly integrated, USB microcontrollers. The FX1 family integrates  
the USB transceiver, serial interface engine (SIE), enhanced 8051 microcontroller, and a programmable peripheral interface  
in a single chip. The General Programmable Interface (GPIF) and Master/Slave Endpoint FIFO (8- or 16-bit data bus) provides  
an easy and glueless interface to popular interfaces such as ATA, UTOPIA, EPP, PCMCIA, and most DSP/processors.  
The CY7C67300 (EZ-Host™) is Cypress Semiconductor’s first full-speed, low-cost multiport host/peripheral controller.  
EZ-Host is designed to easily interface to most high-performance CPUs to add USB host functionality. EZ-Host has its  
own 16-bit RISC processor to act as a coprocessor or operate in standalone mode. EZ-Host also has a programmable I/O  
interface block allowing a wide range of interface options.  
The CY7C68013-56PVC (EZ-USB FX2) is a single-chip integrated USB 2.0 Transceiver, Serial Interface Engine (SIE), and  
Enhanced 8051 Microprocessor, High Speed 480Mbits/sec. Enhanced 8051 microcontroller, and a programmable peripheral  
interface in a single chip. Integrated I2C-compatible controller, runs at 100 or 400kHz, 48MHz, 24MHz, or 12MHz 8051  
C
operation. Four integrated FIFOs, brings glue and FIFO inside for lower system cost. Automatic conversion to and from 16-bit The Wireless enCoReII family brings the features and benefits of the enCoReII to non-USB applications. The enCoRe™  
buses, master or slave operation. FIFOs can use externally supplied clock or asynchronous strobes. Easy interface to ASIC II family has an integrated oscillator that eliminates the external crystal or resonator, reducing overall cost. Also integrated  
and DSP ICs, up to 40 general purpose I/Os.  
into this chip are other external components such as wake-up circuitry.  
EPROM  
External  
USB Application  
Speed  
Number  
I/O  
Core  
Arch.  
Temperature  
Range  
Pin Count  
Package  
Digi-Key  
Part No.  
Price Each  
25  
Cypress  
Part No.  
Memory Size RAM Oscillator Speed Configuration  
Voltage  
1
100  
Low Speed USB Microcontrollers  
12  
12  
12  
16  
16  
M-8  
M-8  
M-8  
M-8  
M-8  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
20-SOIC  
20-DIP  
20-SOIC  
24-QSOP  
24-QSOP  
428-1313-ND  
428-1849-ND◆  
428-1850-ND◆  
428-1314-ND  
428-1618-ND◆  
4.09  
3.28  
3.28  
4.84  
4.84  
2.55  
2.63  
2.63  
2.98  
2.98  
2.05  
2.22  
2.22  
2.42  
2.42  
CY7C63001A-SC  
CY7C63001C-PXC  
CY7C63001C-SXC  
CY7C63101A-QC  
CY7C63101A-QXC  
4K  
3K  
128  
96  
6MHz Resonator  
6MHz Resonator  
OTP  
OTP  
1.5Mbps  
1.5Mbps  
12  
M-8  
0°C ~ 70°C  
4.0 ~ 5.25  
18-SOIC  
428-1719-5-ND◆  
3.28  
2.63  
2.22  
CY7C63231A-SXC  
32  
32  
11  
11  
11  
M-8  
M-8  
M-8  
M-8  
M-8  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
48-SSOP  
48-SSOP  
18-DIP  
18-SOIC  
18-SOIC  
428-1319-ND  
428-1852-ND◆  
428-1854-ND◆  
428-1323-ND  
428-1855-ND◆  
5.31  
4.78  
4.02  
4.47  
4.02  
3.29  
3.82  
3.22  
2.80  
3.22  
2.66  
2.98  
2.51  
2.24  
2.51  
CY7C63413-PVC  
CY7C63413C-PVXC  
CY7C63723C-PXC  
CY7C63723-SC  
CY7C63723C-SXC  
8K  
256  
6MHz Resonator  
OTP  
1.5Mbps  
17  
17  
17  
17  
17  
M-8  
M-8  
M-8  
M-8  
M-8  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
24-DIP  
24-DIP  
24-SOIC  
24-SOIC  
24-SOIC  
428-1324-ND  
428-1856-ND◆  
428-1325-ND  
428-1622-ND◆  
428-1857-ND◆  
4.81  
4.33  
4.81  
4.81  
4.33  
2.98  
3.47  
2.98  
2.98  
3.47  
2.41  
2.70  
2.41  
2.41  
2.70  
CY7C63743-PC  
CY7C63743C-PXC  
CY7C63743-SC  
CY7C63743-SXC  
CY7C63743C-SXC  
Medium Performance Full-Speed Microcontrollers — RoHS Compliant  
19  
19  
19  
M-8  
M-8  
M-8  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
4.0 ~ 5.25  
4.0 ~ 5.25  
4.0 ~ 5.25  
28-SOIC  
28-SOIC  
28-DIP  
428-1634-ND  
428-1847-ND  
428-1635-ND  
6.23  
7.04  
6.25  
4.99  
5.63  
5.01  
4.21  
4.38  
4.23  
CY7C64013A-SXC  
CY7C64013C-SXC  
CY7C64013A-PXC  
8K  
256  
16K  
6MHz Xtal  
OTP  
12Mbps  
EZ-USB FX1™ Full-Speed USB — RoHS Compliant  
40  
40  
24  
8051  
8051  
8051  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
3.3  
3.3  
3.3  
128-TQFP  
100-TQFP  
56-QFN  
428-1678-ND  
428-1679-ND  
428-1680-ND  
12.57  
11.85  
10.73  
7.76  
7.39  
6.71  
6.29  
5.93  
5.37  
CY7C64713-128AXC  
CY7C64713-100AXC  
CY7C64713-56FXC  
24MHz Xtal  
RAM  
12Mbps  
USB 2.0 (High Speed) — RoHS Compliant  
40  
40  
40  
24  
24  
8051  
8051  
8051  
8051  
8051  
0°C ~ 70°C  
0°C ~ 70°C  
-40°C ~ 85°C  
0°C ~ 70°C  
0°C ~ 70°C  
3.3  
3.3  
3.3  
3.3  
3.3  
100-TQFP  
128-TQFP  
128-TQFP  
56-QFN  
428-1667-ND  
428-1668-ND  
428-1943-ND  
428-1669-ND  
428-1627-ND  
19.77  
20.95  
25.13  
18.71  
17.87  
12.23  
12.91  
23.46  
11.54  
11.11  
9.89  
10.47  
21.78  
9.36  
CY7C68013A-100AXC  
CY7C68013A-128AXC  
CY7C68013A-128AXI  
CY7C68013A-56LFXC  
CY7C68013A-56PVXC  
56-SSOP  
9.68  
24  
40  
40  
24  
24  
8051  
8051  
8051  
8051  
8051  
-40°C ~ 85°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
3.3  
3.3  
3.3  
3.3  
3.3  
56-SSOP  
100-TQFP  
128-TQFP  
56-QFN  
428-1944-5-ND  
428-1670-ND  
428-1671-ND  
428-1672-ND  
428-1673-ND  
21.44  
22.74  
24.11  
21.53  
20.57  
20.02  
14.03  
14.90  
13.28  
12.72  
18.59  
11.37  
12.06  
10.77  
10.29  
CY7C68013A-56PVXI  
CY7C68014A-100AXC  
CY7C68014A-128AXC  
CY7C68014A-56LFXC  
CY7C68014A-56PVXC  
16K  
24MHz Xtal  
RAM  
12/480Mbps  
56-SSOP  
26  
26  
8051  
8051  
0°C ~ 70°C  
0°C ~ 70°C  
3.3  
3.3  
56-QFN  
56-QFN  
428-1674-ND  
428-1676-ND  
19.61  
22.56  
12.17  
13.96  
9.81  
11.28  
CY7C68015A-56LFXC  
CY7C68016A-56LFXC  
USB HUB and Integrated HUB Solutions — RoHS Compliant  
24MHz Xtal  
6MHz Xtal  
4-port  
39 (4-port)  
M-8  
M-8  
0°C ~ 70°C  
0°C ~ 70°C  
3.3  
4-5.5  
56-QFN  
56-TSSOP  
428-1805-ND  
428-1808-ND  
13.29  
5.50  
10.64  
5.13  
8.27  
4.76  
CY7C65640A-LFXC  
CY7C66113C-PVXC  
8K  
256  
OTP  
N/A  
12Mbps Hub  
12/480Mbps  
EZ-USB SX2™ High Speed USB Interface — RoHS Compliant  
None  
None  
0°C ~ 70°C  
0°C ~ 70°C  
3.3  
3.3  
56-SSOP  
56-QFN  
428-1864-ND  
428-1942-ND  
13.85  
11.64  
8.96  
9.32  
8.40  
7.86  
CY7C68001-56PVXC  
CY7C68001-56LFXC  
24MHz  
USB Host/Slave Controller — RoHS Compliant  
No CPU 0°C ~ 65°C 3.3 48-TQFP  
8K  
256  
16K  
12-48MHz Xtal  
12MHz  
RAM  
1.5-12Mbps  
8
428-1721-ND  
12.56  
13.34  
10.05  
12.01  
8.48  
SL811HST-AXC  
EZ-Host™ USB Host/Peripheral Controller — RoHS Compliant  
ROM/RAM  
32  
CY16  
-40°C ~ 85°C  
3.3  
100-TQFP  
428-1865-ND  
10.65  
CY7C67300-100AXI  
Wireless enCoRe™ II Microcontroller — RoHS Compliant  
36  
20  
20  
M8C  
M8C  
M8C  
0°C ~ 70°C  
0°C ~ 70°C  
0°C ~ 70°C  
2.7 ~ 3.6  
2.7 ~ 3.6  
2.7 ~ 3.6  
48-SSOP  
24-QSOP  
24-SOIC  
428-1795-ND  
428-1798-ND  
428-1799-ND  
3.21  
3.64  
3.82  
2.57  
2.91  
3.06  
2.00  
2.26  
2.38  
CY7C60123-PVXC  
CY7C60223-QXC  
CY7C60223-SXC  
8K  
256  
12MHz  
RoHS Compliant  
Free shipping on orders over $200 CAD! All prices in Canadian dollars and include duty and brokerage fees.  
1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380  
(C091) 687  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CY7B923 HOTLink  
The CY7B923 HOTLink Transmitter and CY7B933 HOTLink Receiver are point-to-point communications building blocks that transfer data over high-speed serial links (fiber, coax, and twisted pair). Standard HOTLink  
data rates range from 160-330 Mbits/second. Higher speed HOTLink is also available for high-speed applications (160-400 Mbits/second), as well as for those low-cost applications HOTLink-155 (150-160 Mbits/second  
operations).  
Features:  
Digi-Key  
Price Each  
25  
Cypress  
Part No.  
• Fibre-Channel compliant • IBM ESCON compliant • DVB-ASI compliant • ATM compliant • B/10B coded or  
10-bit unencoded • Standard HOTLink: 160–330Mbps • High-speed HOTLink 160–400 Mbps for high-speed  
applications • Low-speed HOTLink: 150–160Mbps for low-cost fiber  
Description  
Package Part No.  
1
100  
28-PLCC 428-1706-5-ND  
28-SOIC 428-1707-5-ND  
28-PLCC 428-1708-5-ND  
28-SOIC 428-1709-5-ND  
69.74  
69.74  
69.74  
69.74  
55.79  
55.79  
55.79  
55.79  
47.08 CY7B923-JXC  
47.08 CY7B923-SXC  
47.08 CY7B933-JXC  
47.08 CY7B933-SXC  
Transmitter,  
Standard Speed  
Applications:  
• TTL synchronous I/O • No external phase-locked-loop (PLL) components • Triple PECL 100K serial outputs  
• Dual PECL 100K serial inputs • Low power: 350mW (Tx), 650mW (Rx) • Compatible with fiber optic modules,  
coaxial cable, and twisted pair media • Built-In Self-Test • Single +5V supply • 28-pin SOIC/PLCC/LCC • 0.8  
BiCMOS  
Receiver,  
Standard Speed  
SL11R-DK  
Developer Kits  
The SL11R from Cypress, is a low cost, full speed Universal Serial Bus (USB) RISC based Controller. The  
SL11R contains a 16-bit RISC processor with built-in BIOS ROM that greatly reduces firmware development  
time. This unique architecture provides the ability to upgrade products, in the field, without changing the  
peripheral hardware. The processor can execute code either from internal ROM/RAM or external DRAM,  
SRAM and ROM. Email support.  
C
CY3674  
The development kits for the EZ-USB FX™ family provide complete hardware and software solutions for  
accelerating the firmware and device driver development for all the products in the family. The development  
kits use the actual silicon for the entire development. Software utilities and example of firmware allow the  
user to generate USB traffic in hours, not weeks! Includes an evaluation version of the 8051 Keil Software  
Tools in the Full Speed USB 2.0 development kit. The evaluation version of the C-Compiler lets the designer  
write 8051 microcontroller applications in C and still get the efficiency and speed of assembly language.  
Advanced features from Keil Tools include the ability to single step through code. This makes it easy to  
detect errors, handle source level debugging, and set breakpoints. With the ability to debug code one line at  
a time and to quickly compile and one-step download new code, developers have a more efficient means to  
complete firmware faster than using emulators. The supplied Keil Tools are fully functional, but are limited in  
object size to 4 kilobytes.  
Kit Includes: • HW reference design for SL11R evaluation board • Assembler/Debugger and built in emulator  
• Application notes • BIOS ROM information • System Software demo program source code • Generic  
WDM mini-port driver for WIN98/2000-object code • 2 sample chips  
Devices Supported: SL11R-IDE  
428-1344-ND  
SL11 Development Tools ............................................................ $614.22  
CY4636  
WirelessUSB LP RDK (CY4636) provides an exemplary implementation of a 2:1, bidirectional Wireless  
desktop keyboard and mouse to single wireless receiver. The RDK will help jump-start your Keyboard and  
Mouse development using WirelessUSB LP (CYRF6936) Radio System on Chip. WirelessUSB LP is the  
next generation WirelessUSB device, with high data throughput and low power designed to operate in 2.4  
GHz ISM band. WirelessUSB has many powerful features that allow users to create never before seen radio  
applications.  
Devices Supported: CY7C64713-56LFXC, CY7C64713-100AXC, CY7C64713-128AXC  
Kit Includes:  
• EZ-USB Development Board with CY7C64713-128AXC • Peripheral Board for prototyping • USB cable  
• RS-232 9-pin to 9-pin cable  
Kit Includes: • CYRF6936 WirelessUSB LS transceiver • Optical Sensor Mouse • WirelessUSB keyboard  
• Batteries • CD  
428-1681-ND EZ-USB FX1 Development Kit ......................................................... $608.02  
428-1858-ND  
Wireless USB REF Kit................................................................ $308.66  
CY3684  
CY3655  
The CY3684 development kit for the EZ-USB FX2LP™ family provides complete hardware and software  
solutions for accelerating the firmware and device driver development for all of the products in the family.  
The development kits use the actual silicon for the entire development. Software utilities and example  
firmware allow the user to generate USB traffic in hours, not weeks! Includes an evaluation version of  
the 8051 Keil Software Tools. The evaluation version of the C-Compiler lets the designer write 8051  
microcontroller applications in C and still get the efficiency and speed of assembly language. The supplied  
Keil tools are fully functional, but are limited in object size to 4 kilobytes.  
The enCoRe™ II development system, based on the highly refined PSoC™ (Programmable System-on-  
Chip™) tools, supplies the user with an incircuit emulator (ICE) that works in conjunction with actual silicon to  
provide an accurate and efficient development system. The PSoC Designer™ software consists of a graphical  
user interface, assembler, C-Compiler, linker and debugger for  
environment. A compliant USB “User Module” along with PS/2 and other peripheral User Modules simplifies  
the learning curve and speeds development time.  
a
highly integrated code development  
Kit Includes:  
• Application Board enCoRe II Pod • Wireless enCoRe II Pod • PDIP feet • Modular Programmer Base Board  
• Programming Adapter Plug • USB Cable PS/2 Male to Male Cable • Software • Printed Documentation  
Kit includes:  
• EZ-USB development board • Peripheral board for prototyping • USB cable • RS232 9-pin to 9-pin cable  
428-1773-ND  
428-1774-ND  
Development Kit for enCoRe II ..................................................... $1446.83  
Extension Kit for enCoRe II .......................................................... $763.12  
428-1677-ND Development Kit for EZ-USB FX2LP .................................................... $651.45  
8, 16, and 32-Bit Flash Microcontrollers  
Toshiba 8-bit microcontrollers feature low-power consumption and low voltage operation. The on-chip peripherals options include LCD, VFT and LED display drivers. The 870/C series has a single register bank to increase  
C-Compiler efficiency.  
Features: • Minimum Instruction cycle time: 0.25μs at 16MHz • Low-power modes including HALT, IDLE and clock gear and dual clocks • Powerful instruction set with 731 instructions including multiply, divide, 16-bit  
operations, bit manipulations, etc. • On-chip peripherals including A/D, PWM, UARTS and LCD • Operating Temperature: -40° ~ 85°C  
Kits Include: Evaluation Board, C-Compiler (3000 lines per module), Assembler, Linker, RS-232 Cable, Batteries, Quick Start Guide, Datasheet, Manuals, CD with Tools  
Memory Size  
Supply  
Voltage  
2.7 ~ 3.6  
2.7 ~ 3.6  
1.8 ~ 3.6  
1.8 ~ 3.6  
1.8 ~ 3.6  
1.8 ~ 3.6  
1.8 ~ 3.6  
2.7 ~ 5.5  
2.7 ~ 5.5  
4.5 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
2.7 ~ 5.5  
1.8 ~ 5.5  
2.4 ~ 3.6  
2.4 ~ 3.6  
2.4 ~ 3.6  
2.4 ~ 3.6  
2.4 ~ 3.6  
Digi-Key  
Price Each  
25  
Toshiba  
EPROM  
RAM  
24KB  
64KB  
2K  
I/O  
143  
209  
39  
39  
56  
56  
48  
22  
24  
26  
24  
33  
35  
48  
55  
62  
62  
56  
56  
91  
32  
61  
81  
81  
83  
136  
Package  
193-FBGA  
281-FBGA  
64-QFP  
64-LQFP  
64-QFP  
Part No.  
1
15.67  
51.68  
6.95  
100  
12.51  
41.26  
4.33  
4.33  
6.71  
6.62  
5.26  
4.17  
4.17  
1.97  
2.78  
4.19  
2.41  
3.70  
7.94  
4.24  
4.24  
4.36  
4.36  
4.28  
3.39  
6.25  
10.12  
6.25  
6.25  
9.91  
Part No.  
512K  
2MB  
32K  
32K  
32K  
32K  
48K  
8K  
TMP19A43FDXBG-ND◆  
TMP19A64F20AXBG-ND◆  
TMP86FM29FG-ND◆  
TMP86FM29UG-ND◆  
TMP86FM48FG-ND◆  
TMP86FM48UG-ND◆  
TMP86FP24FG-ND◆  
TMP86F807MGEY-ND◆  
TMP86F808DMGEY-ND◆  
TMP86FH09NGZM-ND◆  
TMP86FH12MGZ-ND◆  
TMP86FH46ANGZ-ND◆  
TMP86FH47UG-ND◆  
TMP86FS23UGJZ-ND◆  
TMP86FS27FG-ND◆  
TMP86FS28DFGJZ-ND◆  
TMP86FS28FGTZ-ND◆  
TMP86FS49AFGZ-ND◆  
TMP86FS49AUGJZ-ND◆  
TMP86FS64FGTZ-ND◆  
TMP86PH22UGJZ-ND◆  
TMP91FW40FGJZ-ND◆  
TMP91FY42FGJZ-ND◆  
TMP91FW60DFGTZ-ND◆  
TMP91FW60FGBJZ-ND◆  
TMP92CZ26AXBG-ND◆  
BMSKTOPASFM47AND-ND  
BMSKTOPASFMA-ND  
BMSKTOPASFM48AND-ND  
BMSKTOPAS86FS49A-ND◆  
14.11  
46.54  
5.56  
5.56  
7.95  
7.85  
6.23  
5.37  
5.37  
2.53  
3.58  
4.97  
2.86  
4.75  
9.41  
5.03  
5.03  
5.17  
5.17  
5.51  
4.36  
7.41  
11.41  
7.41  
7.41  
11.17  
TMP19A43FDXBG  
TMP19A64F20AXBG  
TMP86FM29FG  
2K  
6.95  
TMP86FM29UG  
2K  
9.93  
TMP86FM48FG  
2K  
64-LQFP  
80-LQFP  
30-SSOP  
30-SSOP  
32-SDIP  
30-SSOP  
42-SDIP  
44-LQFP  
64-LQFP  
80-LQFP  
80-LQFP  
80-QFP  
9.80  
TMP86FM48UG  
2K  
7.79  
TMP86FP24FG  
256  
256  
512  
512  
512  
512  
2K  
6.70  
TMP86F807MG(EY)  
TMP86F808DMG(EY)  
TMP86FH09NG(ZM)  
TMP86FH12MG(Z)  
TMP886FH46ANG(Z)  
TMP86FH47UG  
8K  
6.70  
16K  
16K  
16K  
16K  
60K  
60K  
60K  
60K  
60K  
60K  
60K  
16K  
128K  
256K  
128K  
128K  
8K  
3.15  
4.47  
6.20  
3.57  
5.93  
TMP86FS23UG(JZ)  
TMP86FS27FG  
1K  
11.76  
6.28  
2K  
TMP86FS28DFG(JZ)  
TMP86FS28FG(TZ)  
TMP86FS49AFG(Z)  
TMP86FS49AUG(JZ)  
TMP86FS64FG(TZ)  
TMP86PH22UG(JZ)  
TMP91FW40FG(JZ)  
TMP91FY42FG(JZ)  
TMP91FW60DFG(TZ)  
TMP91FW60FG(B,JZ)  
TMP92CZ26AXBG  
BMSKTOPASFM47(AND)  
BMSKTOPASFM29(AND)  
BMSKTOPASFM48(AND)  
BMSKTOPAS86FS49(A)  
2K  
6.28  
2KB  
2KB  
2KB  
512  
4KB  
16KB  
8KB  
8KB  
288KB  
60-QFP  
6.45  
60-LQFP  
100-QFP  
44-LQFP  
100-LQFP  
100-LQFP  
100-QFP  
100-LQFP  
228-FBGA  
6.45  
6.87  
5.45  
9.26  
12.67  
9.26  
9.26  
12.41  
122.78  
122.78  
122.78  
122.78  
86FH47 Starter Kit........................................................................  
86FM29 Starter Kit .......................................................................  
86FM29 Starter Kit .......................................................................  
TMP86FS49 Evaluation Kit ..............................................................  
RoHS Compliant  
Free shipping on orders over $200 CAD! All prices in Canadian dollars and include duty and brokerage fees.  
688 (C091)  
1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cornelius Beverage Dispenser Enduro 300 BC User Manual
Crate Amplifiers Stereo Amplifier G40C User Manual
Creative Speaker L3800 User Manual
Crock Pot Slow Cooker Stoneware Slow CookerRival User Manual
Dualit Espresso Maker 1332 A User Manual
Dymo Printer 350D User Manual
Dyson Vacuum Cleaner DC 34 User Manual
Fisher Price Car Seat R6069 User Manual
Gefen Switch GEF DVIKVM 848DL User Manual
Gigabyte Network Card GA 8VM800M User Manual