Variable Speed Quad Blade
Food Processor
OWNER’S MANUAL
Model FP86H
120V., 60Hz., 800 Watts
USA: EURO-PRO OPERATING LLC
94 Main Mill Street, Door 16
Plattsburg, NY 12901
Canada: EURO-PRO OPERATING LLC
4400 Bois Franc
St. Laurent, QC H4S 1A7
Tel.: 1 (800) 798-7398
COPYRIGHT © EURO-PRO OPERATING LLC 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance & Cleaning Instructions
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
Cleaning and Maintenance
Using the Storage Compartment
Caution: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position before inserting or removing
attachments.
The food processor comes with a blade
storage compartment.
1. Read all instructions before using
the appliance. It is suggested
that you keep these instructions
in a safe place for future
11. Keep hands and utensils away
from moving blades or discs
while processing food to reduce
the risk of severe injury to
persons or damage to the food
processor. A scraper may be
used but must be used only when
the food processor is not running.
12. Blades are sharp. Handle
carefully. When handling the
chopper blade always hold it by
the plastic hub.
13. To reduce the risk of injury, never
place cutting blades or discs on
the base without first putting bowl
properly in place.
14. Be certain cover is securely
locked in place before operating
appliance.
1. Press down and pull back on the
locking latch of the storage
compartment. (Fig. 10)
reference.
•
•
•
Never immerse the unit, cord or
plug in water or any other liquid.
2. Your voltage must correspond to
the voltage printed on the bottom
of the appliance.
3. To protect against electrical
shock, do not immerse the motor
housing (base), cord, or plug in
water or other liquid.
4. Close supervision is necessary
when the appliance is used by or
near children.
5. Unplug appliance from outlet when
not in use, before putting on or
taking off parts and before
cleaning.
Clean the main unit with a damp
cloth only.
Locking
Latch
Use extreme caution when
cleaning the chopping blade as
the blades are very sharp.
•
•
All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
Fig. 10
If food has spilled over on to the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl.
2. Each blade is assigned a letter (A
through E) and has a slot
corresponding to that letter. Store
each blade in the corresponding
slot.
6. Avoid touching moving parts at
all times.
15. Never feed food by hand. Always
use food pusher.
16. Do not attempt to by-pass the
cover interlock mechanism.
17. Always operate food processor
with the cover in place.
7. Do not operate the appliance with
a damaged cord or plug, or after
the appliance malfunctions, has
been dropped or damaged in any
manner. Return the appliance to
EURO-PRO Operating LLC for
examination, repair, electrical or
mechanical adjustment.
8. The use of attachments including
canning jars not recommended
by the manufacturer may cause
fire, electric shock or injury to
persons.
•
The lid and protective blade guards
may be washed in lukewarm water
and a mild dishwashing liquid. DO
NOT place these in the dish-
washer.
This unit has a short power supply cord
to Reduce the risk resulting from
becoming entangled in or tripping over a
long cord. An extension cord may be
used if you are careful in its use:
1. The electrical rating of the extension
cord should be at least as great as
the electrical rating of the appliance.
2. An extension cord with the power
cord must be arranged so that it will
not drape over the countertop or
tabletop where they can be pulled on
by children or tripped over
9. Do not use outdoors.
10. Do not let cord hang over edge of
table or counter or touch hot
surfaces.
accidentally.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
8
REV. 07/06A
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Processing Examples
Important Information
Processing Examples with the Upper and Lower Chopping Blades
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
Congratulations! As the owner of a new Variable Speed Quad Blade Food
Processor, you are about to use a very versatile and powerful kitchen appliance that
will quickly become an indispensable item in your kitchen. Bravetti products are
engineered to meet the highest quality standards and are designed to offer the
ultimate in ease of operation and convenience.
PRODUCT
QUANTITY
RECOMMENDED
SPEED
OPERATION TIMES
(used in 10 - 20 second intervals)
Important Information
MEAT*
ONIONS
24.5 oz / 700 gr.
24.5 oz / 700 gr.
21 oz / 600 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
4 SLICES
MAX
5 - 6
15 - 30 SECONDS
15 - 30 SECONDS
15 - 30 SECONDS
15 - 30 SECONDS
15 – 30 SECONDS
10 – 20 SECONDS
30 SECONDS
Please read all the following instructions carefully:
NUTS
8-MAX
1 - 8
IMPORTANT
FISH*
For your protection, the Variable Speed Quad Blade Food Processor has a
double safety switch so that it cannot run unless the bowl with lid is locked in place.
Do not attempt to by-pass the safety interlock mechanism.
CHEESE
4 - 8
LIQUIDS (SOUPS)
CARROTTS
BREAD
1 - 8
6 - 8
IMPORTANT NOTICE
6 - 8
15 – 30 SECONDS
15 – 30 SECONDS
15 – 30 SECONDS
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.
APPLES
24.5 oz / 700 gr.
MAX 4 BUNDLES
8 – MAX
MAX
PARSLEY
Hints & Tips for Chopping Blades
•
•
•
•
Use both chopping blades for meats, fish, vegetables, cheese, etc. and have the
speed level set to “Max”.
For finer chopping, increase the length of time you process. DO NOT exceed
processing times of more than 20 seconds per processing interval.
For coarser chopping, use the “PULSE” button for a few seconds and monitor food
texture.
CAUTION
Carefully remove the protective blade guards from blades before using in the food
processor.
Pre-cut larger pieces to make them fit into the feeder tube. When chopping hard
foods (e.g. meat, cheese) cut into 1-inch (2.4 cm) cubes.
Processing Examples for Blades
Recommended speed for processing with chopping blades is High.
SAVE THESE INSTRUCTIONS
Thin
Shredding
(carrots,
potatoes,
cucumbers,
cabbage,
Thick
Shredding
(Lettuce,
carrots,
onions, soft
cheeses)
Thick
Thin
Slicing
(Carrots,
cucumbers,
raw potatoes,
lettuce)
Grating
(Hard
Cheeses)
Slicing
(Cabbage,
carrots,
FOR HOUSEHOLD USE ONLY
onions)
soft cheeses)
Hints & Tips for Blades
•
•
•
For shredding, place food horizontally into the feeder tube.
For slicing, place the food vertically.
If grating potatoes or apples, add 1 tsp of lemon juice to prevent them from turning
black. Potatoes can be sliced using the thin slicing blade for chips.
7
2
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR
VARIABLE SPEED QUAD BLADE FOOD PROCESSOR
Operating Instructions
2. Plug in the processor and turn the
Speed Control Dial
The speed control dial has the following
speed settings:
speed control dial to the desired
speed level. If the processor does
not come on check that the lid are
correctly fitted and locked into
place.
•
Off: Turn the speed control dial to
“Off” in order to stop the food
processor from operating.
Important Note: The unit will NOT
operate without the lid locked into
place.
•
1 to 9: Speed levels may be
increased from 1 to 9. The speed can
be adjusted while the food processor
is in use.
3. Use the food pusher when putting
food into the feeder tube. (Fig. 9)
For safety reasons it is always
better to use the food pusher,
and to NEVER feed food by hand.
•
•
Max: Highest level of speed that the
food processor can operate at.
PULSE: Use of the “PULSE” button
allows greater control over the texture
of the food being processed. Use
"PULSE" when the unit is in the "Off"
position.
Caution: DO NOT operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow motor to stop
and run again for another 20 seconds.
Caution: The "PULSE" function is only
intended to be used for short periods of
time. Damage to the unit may occur if not
used properly.
Operating the Food Processor
Once having assembled the food
processor according to the “Assembly
Instructions” the unit is now ready for
use.
FOOD
PUSHER
SPEED AND PULSE
1. Food Pusher
2. Feeder Tube
CONTROL
3. Food Processor Bowl
4. Suction Feet
5. Speed and Pulse Control
6. Blade Storage Compartment
7. Food Processor Lid
8. Blade Holder
9. Thin Shredding Blade
10. Thick Shredding Blade
11. Thin Slicing Blade
12. Thick Slicing Blade
13. Grating Blade
14. Upper Chopping Blade
15. Blade Covers (x2)
16. Lower Chopping Blade
17. Spatula
FEEDER
TUBE
1. Place the lid on top of the food
processor bowl. Once in place twist it
to the left so that it is locked securely.
(Fig. 8)
Speed
Control
Dial
Note: Until the lid is securely in place,
ensure that the unit is NOT plugged
into an electrical outlet.
Fig. 9
OFF to
MAX
4. When finished using the food
processor, turn the speed control
dial to the “Off” position and unplug
it from the electrical outlet.
TWIST THE LID TO THE LEFT
TO LOCK INTO PLACE
Pulse Button
Technical Specification
Voltage:
Power:
120V., 60Hz.
800 Watts
Fig. 8
Food Processor Capacity: 6 cups (1.5 L)
* Illustrations may differ from actual product.
6
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly Instructions
Assembly Instructions
Before using your food processor for
the first time, do the following:
Using the Lower Chopping Blade
Only
•
Once in place, use thumb to press
PROTECTIVE
BLADE
COVERS
on the base of the blade to snap it
into place. (Fig. 6) Ensure that the
blade holder is securely in place
before continuing.
1. Read all the instructions in this
•
Place the food processor bowl
securely on the main body. (Fig. 1)
instruction manual.
2. Remove the unit from packaging.
•
Once the food processor bowl is
securely in place, remove the
protective blade cover from the
lower chopping blade and carefully
place the lower chopping blade onto
the shaft the food processor bowl.
(Fig. 4)
Caution: Handle blade carefully to
avoid cuts and injuries.
Warning: BLADES ARE VERY
SHARP! Take extra care when
removing the protective blade
covers to prevent injuries.
Fig. 2
Important Note: Always replace the
protective blade covers onto the blades
when the blades are not in use.
PRESS
ON THE
BASE OF
THE
BLADE
TO SNAP
IT INTO
PLACE
UPPER
CHOPPING
BLADE
CAUTION!
BLADES
ARE
Using the Blade Holder
3. Wash the unit and attachments
according to the “Maintenance &
Cleaning” section. DO NOT
•
Place the food processor bowl
securely on the main body. (Fig. 1)
SHARP!
•
Select the desired blade. There are
five (5) different blades to choose
from:
IMMERSE MAIN UNIT IN WATER.
4. Once the unit has been thoroughly
cleaned, it is ready for assembly
and use.
1. Thin Shredding Blade
2. Thick Shredding Blade
3. Thin Slicing Blade
4. Thick Slicing Blade
5. Grating Blade
Fig. 6
•
To remove the blade from the blade
holder, push the blade from the
back of the blade holder. (Fig. 7)
LOWER
CHOPPING
BLADE
Assembling the Food Processor
Fig. 3
The food processor can be used either
with both the upper and lower chopping
blades or just the lower chopping
blade. The food processor can also use
either of the blade holders instead of
the chopping blades.
•
To attach the blade to the blade
holder, take the blade holder in one
hand and insert the blade tab first
into the opening. (Fig. 5)
BACK OF
BLADE
HOLDER
•
After having assembled the chop-
ping blades, carefully place the
chopping blade assembly onto the
shaft of the food processor bowl.
(Fig. 4) Ensure that the blades are
securely in place before continuing.
PRESS
DOWN ON
BACK OF
BLADE
Caution: Handle blade carefully to
avoid cuts and injuries.
Note: Before assembling the food
processor, ensure that it is NOT
plugged into an electrical outlet.
CHOPPING
BLADE
BLADE
Assembling Both Chopping Blades
ASSEMBLY
•
Place the food processor bowl
securely on the main body. (Fig. 1)
Fig. 7
FOOD
PROCESSOR
BOWL
BLADE
TAB
FOOD
PROCESSOR
Fig. 4
SHAFT
Fig. 5
Fig. 1
MAIN BODY
•
Once the food processor bowl is
securely in place, remove the
protective blade covers and carefully
assemble the upper and lower chopping
blades. (Fig. 2 & 3)
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|