Belkin Network Card F5D8010 User Manual

Wireless Pre-N  
Notebook Network Card  
Enjoy superior wireless network  
performance and coverage  
��  
���  
��  
User Manual  
 
��  
��  
F5D8010  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
1
2
3
4
5
6
Congratulations and thank you for purchasing the Belkin Wireless  
Pre-N Notebook Network Card (the Card). This product features  
new MIMO (Multiple Input Multiple Output) technology that solves  
interference and range challenges of wireless networking in larger  
homes and offices. MIMO delivers the best wireless network  
performance over expanded coverage area, and will be the heart  
of the upcoming 802.11n standard. Belkin’s new “Pre-N” products  
with MIMO achieve twice the coverage of 802.11g networks with  
exceptional data transfer results.  
Using MIMO’s revolutionary, smart-antenna technology, Belkin  
Pre-N products can boost network speeds by up to 6 times previous  
capacities. Its enhanced data rates and range make MIMO  
a perfect technology for streaming multimedia content more reliably.  
The easy installation and setup will have you networking in minutes.  
Please be sure to read through this User Manual completely, and pay  
special attention to the section entitled “Placement of your Wireless  
Network Hardware for Optimal Performance”.  
Advantages of a Wireless Network  
Mobility – you no longer need a dedicated “computer  
room”—you can work on a networked laptop or desktop  
computer anywhere within your wireless range  
Easy installation – Belkin Easy Installation Wizards make  
setup simple  
Flexibility – set up and access printers, computers, and other  
networking devices from anywhere in your home  
Easy expansion – the wide range of Belkin networking  
products let you expand your network to include devices such  
as printers and gaming consoles  
No cabling required – Belkin spares you the expense and  
hassle of retrofitting Ethernet cabling throughout your home  
or office  
Widespread industry acceptance – choose from a wide range  
of interoperable networking products  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Placement of your Wireless Networking Hardware for  
Optimal Performance  
Your wireless connection will be stronger the closer your computer is  
to your wireless router (or access point). Typical indoor operating range  
for your wireless devices is between 100 and 200 feet. Conversely, your  
wireless connection and performance will degrade somewhat as the  
distance between your wireless router (or access point) and connected  
devices increases. This may or may not be noticeable to you. As you  
move further from your wireless router (or access point), connection  
speed may decrease. Additionally, metal appliances, obstructions, and  
walls can weaken signals simply by getting in the way of your network’s  
radio waves.  
If you have concerns about your network’s performance related to range  
or obstruction factors, try moving the computer to a position between  
five and 10 feet from the wireless router (or access point), in order to  
see if distance is the problem. If difficulties persist even at close range,  
please contact Belkin Technical Support.  
Note: While some of the items listed below can affect network  
performance, they will not prohibit your wireless network from  
functioning; if you are concerned that your network is not operating  
at its maximum effectiveness, this checklist may help.  
1. Placement of your Wireless Router or Access Point  
Place your wireless router (or access point), the central connection point  
of your network, as close as possible to the center of your wireless  
network devices.  
To achieve the best wireless network coverage for your “wireless  
clients,” (i.e. computers enabled by Belkin Wireless Notebook Network  
Cards, Wireless Desktop Network Cards, and Wireless USB Adapters):  
• Ensure that your wireless router (or access point) antennas are  
parallel to each other, and are positioned vertically (toward  
the ceiling). If your wireless router (or access point) itself is  
positioned vertically, point the antennas as much as possible  
in an upward direction.  
• In multistory homes, place the wireless router (or access point)  
on a floor that is as close to the center of the home as possible.  
This may mean placing the wireless router (or access point) on an  
upper floor.  
• Try not to place the wireless router (or access point) near a  
cordless 2.4GHz phone.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
1
2
3
4
5
6
2. Avoid Obstacles and Interference  
Avoid placing your wireless router (or access point) near devices that  
may emit radio “noise”, such as microwave ovens. Other objects that  
can inhibit wireless communication can include:  
• Refrigerators  
• Washers and/or dryers  
• Metal cabinets  
• Large aquariums  
• Metallic-based UV tinted windows  
If your wireless signal seems weak in some spots, make sure that  
objects such as these are not blocking the signal’s path between your  
computers and wireless router (or access point).  
3. Cordless Phone Placement  
If the performance of your wireless network is impaired after attending  
to the above issues, AND you have a cordless phone:  
• Try moving the cordless phone away from your wireless router  
(or access point) and your wireless-enabled computers.  
• Unplug and remove the battery from any cordless phone  
that operates on the 2.4GHz band (check manufacturer’s  
information). If this fixes the problem, your phone may  
be interfering.  
• If your phone supports channel selection, change the  
channel on the phone to the furthest channel from your  
wireless network, as possible. For example, change the  
phone to channel 1 and move your wireless router (or access  
point) to channel 11. (See your phone’s user manual for  
detailed instructions.)  
• If necessary, consider switching to a 900MHz or 5GHz  
cordless phone.  
4. Choose the “Quietest” Channel for your Wireless Network  
In locations where homes or offices are close together, such as  
apartment buildings or office complexes, there may be wireless  
networks nearby that can conflict with yours. Use the Site Survey  
capabilities of your Wireless Client Utility to locate any other wireless  
networks, and move your wireless router (or access point) and  
computers to a channel as far away from other networks as possible.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Experiment with more than one of the available channels in order to find  
the clearest connection and avoid interference from neighboring cordless  
phones or other wireless devices.  
Use the detailed Site Survey and wireless channel information  
included in your wireless router’s (or access point’s) user guide for  
more information.  
®
5. Secure Connections, VPNs, and AOL  
Secure connections typically require a user name and password, and are  
used where security is important. Secure connections include:  
• Virtual Private Network (VPN) connections, often used to connect  
remotely to an office network  
®
• The “Bring Your Own Access” program from America Online  
(AOL), which lets you use AOL through broadband provided by  
another cable or DSL service  
• Most online banking websites  
• Many commercial websites that require a user name and  
password to access your account  
Secure connections can be interrupted by a computer’s power  
management setting, which causes it to “go to sleep.” The simplest  
solution to avoid this is to simply reconnect by rerunning the VPN or  
AOL software, or by re-logging into the secure website.  
A second alternative is to change your computer’s power management  
settings so it does not go to sleep; however, this may not be appropriate  
for portable computers. To change your power management setting  
under Windows, see the “Power Options” item in the Control Panel.  
If you continue to have difficulty with Secure Connection, VPNs, and  
AOL, please review steps 1–4 on pages 2–3 to be sure you have  
addressed these issues.  
For more information regarding our networking products, visit our  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
1
2
3
4
5
6
Product Features  
The Card complies with the IEEE 802.11g standard in order to  
communicate with other 802.11g-compliant wireless devices at  
54Mbps. The Card is compatible with all 802.11g devices as well as  
other 802.11b products at 11Mbps. 802.11g products operate on the  
®
same 2.4GHz frequency band as 802.11b Wi-Fi products.  
2.4GHz ISM (Industrial, Science, and Medical) band operation  
Integrated easy-to-use Wireless Client Utility  
CardBus interface, for operation in virtually any  
notebook computer  
WPA, 64-bit WEP (Wired Equivalent Privacy), or  
128-bit encryption  
Wireless access to networked resources  
Supports for both Infrastructure and Ad-Hoc (peer-to-peer)  
networking modes  
Easy installation and use  
Internal antenna  
LED power and network link indicators  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
Applications and Advantages  
Wireless roaming with a laptop around the home or office  
Offers the freedom of networking without cables.  
Compatibility with 802.11g and 802.11b products  
Pre-N wireless LAN solutions are backward-compatible with existing  
Wi-Fi (IEEE 802.11g and 802.11b) products and with other products  
that display the Wi-Fi mark.  
Difficult-to-wire environments  
Enables networking in buildings with solid or finished walls, or open  
areas where wiring is difficult to install.  
Frequently changing environments  
Adapts easily in offices or environments that frequently rearrange or  
change locations.  
Temporary LANs for special projects or peak time  
Sets up temporary networks (such as at trade shows, exhibitions,  
and construction sites), on a short-term basis; also provides an ideal  
solution for companies that need additional workstations for a peak  
activity period.  
SOHO (Small Office/Home Office) networking needs  
Provides the easy and quick, small network installation SOHO  
users need.  
Product Specifications  
Host Interface  
32-bit CardBus  
Operating Temperature  
Storage Temperature  
Humidity  
32–185 degrees F (0–85 degrees C)  
-40–194 degrees F (-40–90 degrees C)  
Max. 95% (non-condensing)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
1
2
3
4
5
6
(a)  
(c)  
(a) Activity LED  
Lights up and flashes when the Card is active  
(b) Link LED  
Lights up when the Card links to a wireless network  
(c) Card Connector  
Part of the Card that fits into your computer’s CardBus slot  
System Requirements  
PC-compatible laptop with one available CardBus slot  
®
Windows 2000 or XP  
Package Contents  
Wireless Pre-N Notebook Network Card  
Quick Installation Guide  
Installation Software CD  
User Manual  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Setting Up the Card  
Step 1  
Install the Software Drivers  
IMPORTANT NOTE: Install the software before inserting the Card.  
1.1 Insert the Installation Software CD into your CD-ROM drive.  
1.2 The Belkin Wireless Client Utility Setup screen will automatically  
appear (may take 15–20 seconds to appear).  
Note: If the Wireless Client Utility Setup screen does not appear  
within 20 seconds, access your CD-ROM by double-clicking on the  
“My Computer” icon and double-click on the CD-ROM drive that the  
installation CD has been placed in. Double-click on the folder named  
“Files”, then double-click on the icon named “setup.exe”.  
1.3 Click “Install Software” from the menu.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Setting Up the Card  
1
2
3
4
5
6
1.4 The installer will now start.  
Click “Next” and follow the  
on-screen instructions.  
1.5 You might see a screen similar  
to this one. This DOES NOT  
mean there is a problem. Our  
software has been fully tested  
and is compatible with this  
operating system. Select  
“Continue Anyway” and follow  
the on-screen instructions.  
Step 2  
Plug the Card into an Available CardBus Slot on your Laptop  
2.1 During the install process, you  
will be prompted to insert your  
Card. Insert the Card, label side  
UP, into your computer’s CardBus  
slot firmly until it stops. The power  
light on the top will turn on when it  
is inserted properly.  
Note: If your system did not  
prompt you to insert your Card  
after the installation is completed,  
please do so now.  
2.2 You might see a screen similar  
to this one. This DOES NOT  
mean there is a problem. Our  
drivers have been fully tested  
and are compatible with this  
operating system. Select  
“Continue Anyway” and follow  
the on-screen instructions.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Setting Up the Card  
Step 3  
Install the Wireless Client Utility  
3.1 After the network card driver  
installation is complete, click “Next”  
to install the Wireless Client Utility.  
3.2 The wizard will prompt you to choose  
an installation location. Click “Next”  
to accept the default location, or click  
“Browse” to select a different location  
before clicking “Next”.  
3.3 Click “Finish” to start the Belkin  
Wireless Client Utility.  
3.4 A small Signal Indicator icon should  
appear in your system tray (bottom  
right corner of most screens).  
Double-click on this to bring up the  
Wireless Client Utility.  
3.5 The compact Wireless Client Utility  
screen will appear. Click on “More”  
to open up the expanded view.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Setting Up the Card  
1
2
3
4
5
6
3.6 Select a network to connect to by  
double-clicking on a network from  
the Network List.  
Note: In order to see your available  
networks, you must be near a  
working wireless router or access  
point. If using with the Belkin  
Wireless Pre-N Router, connect to  
the “Belkin_Pre-N_” SSID network  
name. The network name may be  
followed by six numbers, which are  
specific to your router.  
3.7 The Profile screen will appear to  
save the settings to the network  
selected. Click “Save & Activate”  
to save the Profile and activate it.  
3.8 The Signal Indicator icon should  
appear green in your system  
tray (bottom right corner of most  
screens). The color of the icon  
reflects the connection link: green  
for good, yellow for weak, red if  
it is not active, and a red X if the  
radio is turned off.  
Installation is now complete!  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
How to Access the Belkin Wireless Client Utility  
Double-click the Signal Indicator icon to bring up the Wireless Client  
Utility. If the icon is not present, click on “Start > Programs > Belkin >  
Belkin Wireless Client Utility”.  
The following screen will appear.  
Navigating the User Interface  
Using the Compact View  
a
( )  
b
( )  
c
( )  
(a) Signal icon  
The signal icon on the left changes color according to current received  
signal strength: green indicates an excellent signal, yellow indicates it is  
acceptable, and red means there is no active signal.  
(b) Display Mode  
The Display Mode button alternates between the current Connection  
Information Screen and the received Signal Strength Chart. The Signal  
Strength Chart displays the signal strength of the Card for the last  
60 seconds.  
(c) More  
The More button opens the expanded view that allows you to view and  
configure more options of your Card.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
Using the Expanded View  
b
( )  
c
( )  
a
( )  
f, g  
(
)
d
( )  
h
( )  
e
( )  
i
( )  
(a) Network List  
List all available networks; double-click on a network to connect.  
(b) Show BSSID  
Select this check box if you wish to see the MAC address of the  
access point or router.  
(c) Allow Roaming  
Select this check box to move from one network to another without  
changing the active network selection.  
(d) Scan  
Click this button to scan the available networks in your area.  
(e) Create  
You may create a new profile using this button.  
(f, g) Save, Delete  
You may save and delete networks from the Network List by using  
these buttons.  
(h) Edit  
To edit a saved profile, use this button.  
(i) Help  
Click this button to link to the help files for assistance using this  
Utility or any of the features.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
Setting Wireless Network Preferences  
To create a new Wireless Network Profile, click on the “Create” button,  
which will open up the “Profile” window.  
j
( )  
a
( )  
b
( )  
d
( )  
c
( )  
e
( )  
f
( )  
g
( )  
h
( )  
i
( )  
(a) Profile Name  
Enter a profile name of your choice for the new profile.  
(b) Service Set Identifier  
When this option is selected, then the Card will attempt to connect  
to any available wireless router or access point in the area. Ad-hoc  
networks will be excluded from the list of available networks when this  
option is selected.  
(c) Connect to Ad-Hoc Network  
When this option is selected, the Card will attempt to connect to any  
available computer in the area that is configured to be used in ad-hoc  
mode. Wireless router(s) or access point(s) will be excluded from the list  
of available networks when this option is selected.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
(d) Start Ad-Hoc Network  
When this option is selected, the Card will create a new ad-hoc  
network for any available computer in the area that is configured to  
be used in ad-hoc mode to connect to this computer.  
(e) SSID  
Enter the SSID of the network you want to connect to or create.  
(f) Power Settings  
Drag the sliding bar to select a power level. Higher settings enable  
the highest performance, lower settings draw less power from your  
PC when you want to conserve battery power or when you are within  
close range.  
(g) Security Settings Box  
The Security Settings box includes choices for configuring a secure  
connection. Please see the “Securing your Wi-Fi Network” section of  
this User Manual for information on setting up security for this Card.  
(h) Save & Activate  
Click “Save & Activate” to save the settings on this window.  
(i) Cancel  
Click “Cancel” to choose not to save any settings and exit  
this window.  
(j) Advanced  
The Advanced button opens  
the “Advanced Profile Settings”  
window. These settings enable  
you to take advantage of the  
enhanced performance features  
of the Belkin Router. We  
recommended that you keep the  
default “Auto” settings, because  
they provide compatibility  
with basic and enhanced data  
rates and network density.  
This window also allows you  
to choose the transmit rate  
between the Card and Router.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
Securing your Wi-Fi Network  
Here are a few different ways to maximize the security of your wireless  
network and protect your data from unwanted intrusion. This section is  
intended for the home, home office, and small office user. At the time of  
publication, three encryption methods are available.  
Encryption Methods:  
Name  
64-bit Wired  
Equivalent  
Privacy  
128-bit  
Encryption  
Wi-Fi Protected  
Access  
Wi-Fi Protected  
Access  
Acronym  
Security  
Features  
64-bit WEP  
Good  
128-bit WEP  
Better  
WPA-TKIP  
Best  
WPA-AES  
Best  
Static keys  
Static keys  
Dynamic key  
encryption  
Dynamic key  
encryption  
and mutual  
authentication  
and mutual  
authentication  
Encryption  
Added security  
over 64-bit  
TKIP (temporal  
key integrity  
protocol) added Standard) does  
so that keys  
are rotated and  
encryption is  
strengthened  
AES (Advanced  
Encryption  
keys based on  
RC4 algorithm  
(typically  
WEP using a  
key length of  
104 bits, plus  
24 additional  
bits of system-  
generated data  
not cause any  
throughput loss.  
40-bit keys)  
WEP (Wired Equivalent Privacy)  
WEP is a common protocol that adds security to all Wi-Fi-compliant  
wireless products. WEP gives wireless networks the equivalent level of  
privacy protection as a comparable wired network.  
64-Bit WEP  
64-Bit WEP was first introduced with 64-bit encryption, which includes  
a key length of 40 bits plus 24 additional bits of system-generated data  
(64 bits total). Some hardware manufacturers refer to 64-bit as 40-bit  
encryption. Shortly after the technology was introduced, researchers  
found that 64-bit encryption was too easy to decode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
128-Bit Encryption  
As a result of 64-bit WEP’s potential security weaknesses, a more  
secure method of 128-bit encryption was developed. 128-bit  
encryption includes a key length of 104 bits plus 24 additional bits of  
system-generated data (128 bits total). Some hardware manufacturers  
refer to 128-bit as 104-bit encryption.  
Most of the new wireless equipment in the market today supports  
both 64-bit WEP and 128-bit WEP encryption, but you might have  
older equipment that only supports 64-bit WEP. All Belkin wireless  
products will support both 64-bit WEP and 128-bit encryption.  
Encryption Keys  
After selecting either the 64-bit WEP or 128-bit encryption mode, it is  
critical that you generate an encryption key. If the encryption key is  
not consistent throughout the entire wireless network, your wireless  
networking devices will be unable to communicate with one another.  
You can enter your key by typing in the hexadecimal (hex) key. A hex  
key is a mixture of numbers and letters from A–F and 0–9. For 64-bit  
WEP, you need to enter 10 hex keys. For 128-bit WEP, you need to  
enter 26 hex keys.  
For instance:  
AF 0F 4B C3 D4 = 64-bit WEP key  
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 128-bit key  
Write down the hex WEP key from your wireless router or access  
point and enter it manually into the hex WEP key table in your Card’s  
configuration screen.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
WPA (Wi-Fi Protected Access)  
WPA is a new Wi-Fi standard that improves upon the security features  
of WEP. To use WPA security, the drivers and software of your wireless  
equipment must be upgraded to support it. These updates will be found  
on your wireless vendor’s website. There are two types of WPA security:  
WPA-PSK (no server) and WPA (with radius server).  
WPA-PSK (no server) uses what is known as a pre-shared key  
as the network key. A network key is a password that is between  
eight and 63 characters long. It can be a combination of letters,  
numbers, or characters. Each client uses the same network key to  
access the network. Typically, this is the mode that will be used  
in a home environment.  
WPA (with radius server) is a system where a radius server distributes  
the network key to the clients automatically. This is typically found in a  
business environment. For a list of Belkin wireless products that support  
WPA, please visit our website at www.belkin.com/networking  
Most wireless products ship with security turned off. Therefore, once you  
have your network working, you may need to activate WEP or WPA and  
make sure all your wireless devices are sharing the same network key.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
The following diagram shows the effect of not having the correct  
network key throughout your network.  
Network key=  
MyPassword  
Wireless G USB  
Network Adapter  
Network key=  
MyPassword  
Wireless G USB  
Network Card  
Network key=  
WRONG Password  
Wireless G Desktop  
Network Card  
Setting Up your Belkin Wireless Router or Access Point  
to Use Security  
To start using security, you need to first enable WEP or WPA for your  
wireless router or access point. For the Belkin Wireless Router (or  
Access Point), these security features can be configured by using  
the web-based interface. See your wireless router (or access point)  
manual for directions on how to access the management interface.  
Changing the Wireless Security Settings  
The Belkin Wireless G Router and Belkin Wireless G Range Extender/  
Access Point are equipped with the latest WPA security feature. They  
also support the legacy WEP security standard. By default, wireless  
security is disabled.  
To enable security, you will need to determine which standard you  
want to use. To access the security settings, click “Security” on the  
wireless section using the web-based interface. (See your wireless  
router or access point manual for directions on how to access the  
security settings.)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
WEP Setup  
64-Bit WEP Encryption  
1. Select “64-bit WEP” from the drop-down menu.  
2. After selecting your WEP encryption mode, you can enter your key  
by typing in the hex key manually, or you can type in a passphrase  
in the “Passphrase” field and click “Generate” to create a key.  
A hexadecimal (hex) key is a mixture of numbers and letters from  
A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.  
For instance:  
AF 0F 4B C3 D4 = 64-bit WEP Key  
3. Click “Apply Changes” to finish. Encryption in the wireless router  
or access point is now set. Each of your computers on your  
wireless network will now need to be configured with the same  
security settings.  
WARNING: If you are using a wireless client to turn on the security  
settings in your wireless router or access point, you will temporarily  
lose your wireless connection until you activate security on your wireless  
client. Please record the key prior to applying changes in the wireless  
router or access point. If you don’t remember the hex key, your client  
will be locked out of the wireless router or access point.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
128-Bit WEP Encryption  
1. Select “128-bit WEP” from the drop-down menu.  
2. After selecting your WEP encryption mode, you can enter your  
key manually by typing in the hex key manually, or you can type  
in a passphrase in the “Passphrase” field and click “Generate” to  
create a key.  
A hex key is a mixture of numbers and letters from A–F and 0–9.  
For 128-bit WEP, you need to enter 26 hex keys.  
For instance:  
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key  
3. Click “Apply Changes” to finish. Encryption in the wireless router  
or access point is now set. Each of the computers on your  
wireless network will now need to be configured with the same  
security settings.  
WARNING: If you are using a wireless client to turn on the security  
settings in your wireless router or access point, you will temporarily  
lose your wireless connection until you activate security on your  
wireless client. Please record the key prior to applying changes in the  
wireless router or access point. If you don’t remember the hex key,  
your client will be locked out of the wireless router or access point.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
WPA-PSK (no server)  
Choose this setting if your network does not use a radius server.  
WPA-PSK (no server) is typically used in home and small  
office networking.  
1. From the “Security Mode” drop-down menu, select “WPA-PSK  
(no server)”.  
2. Enter your network key. This can be from eight to 63 characters and  
can be letters, numbers, or symbols. This same key must be used  
on all of the clients (network cards) that you want to include in your  
wireless network.  
3. Click “Apply Changes” to finish. You must now set all clients  
(network cards) to match these settings.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
WPA (with server) Settings  
Choose this setting if your network uses a radius server to distribute  
keys to the clients (network cards). WPA (with server) is typically used  
in business networks.  
1. From the “Security Mode” drop-down menu, select “WPA  
(with Radius Server)”.  
2. Enter the IP address of the radius server into the “Radius  
Server” fields.  
3. Enter the radius key into the “Radius Key” field.  
4. Enter the re-key interval. The re-key interval is how often the keys  
are distributed (in packets).  
5. Click “Apply Changes” to finish. You must now set all clients  
(network cards) to match these settings.  
IMPORTANT: You must now set all wireless network cards/adapters  
to match these settings.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
Configuring your Belkin Wireless Notebook or Wireless Desktop  
Network Card to Use Security  
At this point, you should already have your wireless router or access  
point set to use WPA or WEP. In order for you to gain wireless  
connection, you will need to set your Wireless Notebook and Wireless  
Desktop Network Cards to use the same security settings.  
Connecting your Computer to a Wireless Router or Access Point that  
Requires a 64-Bit or 128-Bit WEP Key  
1. Double-click the “Signal Indicator” icon to bring up the “Wireless  
Client Utility” screen. The “More” button will allow you to view and  
configure more options of your Card.  
2. Under the “Network List” window, click on a network name from the  
available networks and click “Create”.  
3. Under “Security Settings” select “Low Security (WEP)”.  
4. Select from the following authentication choices:  
• Shared Key Authentication  
• Open Key Authentication  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
5. Select “128-Bit” or “64-Bit” encryption and type your WEP key in  
the “Key” box.  
IMPORTANT: A WEP key is a mixture of numbers and letters from A–F  
and 0–9. For 128-bit WEP, you need to enter 26 keys. For 64-bit WEP,  
you need to enter 10 keys. This network key needs to match the key  
you assign to your wireless router or access point.  
6. Click “Save” to save the settings.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
Setting Up WPA in Windows XP to Connect your Computer to a Wireless  
Router or Access Point that is Using WPA  
In order to use WPA, ensure you are using “Windows Wireless  
Network Utility” instead of the “Belkin Wireless Client Utility” by  
doing the following:  
1. Under Windows XP, click “Start > Control Panel >  
Network Connections”.  
2. Right-click on “Wireless Network Connection”,  
and select “Properties”.  
3. Clicking on the “Wireless Networks” tab will display the following  
screen. Ensure the “Use Windows to configure my wireless network  
settings” box is checked.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
4. Under the “Wireless Networks” tab, click the “Configure” button  
and you will see the following screen.  
5. For Home or Small Business Users: Select “WPA-PSK” under  
“Network Authentication”.  
NOTE: Select WPA if you are using this computer to connect to  
a corporate network that supports an authentication server such  
as radius server. Please consult your network administrator for  
further information.  
6. Select “TKIP” or “AES” under “Data Encryption”. This setting will  
have to be identical to the router you set up.  
7. Type in your encryption key in the “Network Key” box.  
IMPORTANT: A WPA key is a mixture of numbers and letters from  
A–F and 0–9. This can be from eight to 63 characters in length. This  
network key needs to match the key you assign to your wireless  
router or access point.  
8. Click “OK” to apply settings.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
Monitoring the Status of your Network Connection  
a
( )  
b
( )  
c
( )  
i
( )  
d
( )  
j
( )  
e
( )  
f
( )  
g
( )  
l
( )  
h
( )  
n
( )  
p
( )  
k
( )  
m
o
( )  
(
)
r
( )  
q
( )  
s
( )  
(a) Current Profile  
This is the current profile you are using.  
(b) Connection Quality  
Depending on the distance or noise in your area, the quality you receive  
may be excellent, good, or bad.  
(c) Access Point  
The MAC address of the access point.  
(d) Network Name  
This is the current network SSID to which you are connected.  
(e) Network Type  
Will display either “Infrastructure” if connected to a router or an access  
point, or “Ad-Hoc” when connected to another computer.  
(f) Profile  
This column shows if the network has been saved as a profile.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Belkin Wireless Client Utility  
1
2
3
4
5
6
(g) SSID  
The network name of the router or access point.  
(h) BSSID  
This column will display the router or access point’s MAC address.  
(i) Signal Quality  
The signal strength of the related router or access point.  
(j) Encryption  
Will display “None” when encryption is disabled, “WEP” when either  
64-bit or 128-bit encryption is enabled.  
(k) Transmit Data Rate  
This displays the transmit rate from the router to the Card.  
(l) Receive Data Rate  
This displays the receive rate from the router to the Card. The receive  
data rate may fluctuate as the Card is transmitting data.  
(m) Transmitted Bytes  
This displays the bytes that have been transmitted.  
(n) Received Bytes  
This displays the bytes that have been received.  
(o) Band  
This displays the frequency band the network is using.  
(p) Channel  
This displays the channel the network is on.  
(q) Authentication  
Displays the authentication settings the network is using.  
(r) Encryption  
Will display “None” when encryption is disabled, “WEP” when either  
64-bit or 128-bit encryption is enabled.  
(s) Power Consumption  
This displays the power consumption settings the Card is  
currently using.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
I can’t connect to the Internet wirelessly  
If you are unable to connect to the Internet from a wireless  
computer, please check the following items:  
1. Look at the lights on your wireless router. If you’re using a Belkin  
Wireless Router, the lights should be as follows:  
• The Power light should be on.  
• The Connected light should be on, and not blinking.  
• The WAN light should be either on or blinking.  
If your Belkin Wireless Router’s lights have the above  
characteristics, go to step 2 below.  
If this is NOT the case, make sure:  
• The Router’s power cord is plugged in.  
• All cables are connected between the Router and the modem.  
• All the modem’s LEDs are functioning correctly. If not, see your  
modem’s user manual.  
• Reboot the Router.  
• Reboot the Modem.  
If you continue to have issues, please contact Belkin  
Technical Support.  
If you are not using a Belkin Wireless Router, consult that router  
manufacturer’s user guide.  
2. Open your Wireless Client Utility software by clicking on the icon  
in the system tray at the bottom, right-hand corner of the screen.  
If you’re using a Belkin Wireless Card, the tray icon should look  
like this (the icon may be red, yellow, or green):  
3. The Belkin Wireless Client Utility window will display the available  
networks in the Network List window. Available networks are  
wireless networks you can connect to.  
If you are using a Belkin Pre-N Wireless Router, the default name is  
Belkin Pre-N.  
If you are using a Belkin 802.11g (125 High-Speed Mode)  
Wireless Router, or Belkin 802.11g (54g) Wireless Router,  
“Belkin54g” is the default name.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
1
2
3
4
5
6
If you are using a Belkin 802.11b Wireless Router, the default  
name should be “WLAN”.  
If you’re not using a Belkin Router, please consult your router  
manufacturer’s user manual for the default name.  
The name of your wireless network appears in  
“Network List”  
If the correct network name is listed in the “Network List”, please  
follow the steps below to connect wirelessly:  
1. Click on the correct network name in the “Network List” to  
connect to the network.  
2. If the network has security (encryption) enabled, you will need  
to enter the network key. For more information regarding  
security, see the “Securing your Wi-Fi Network” section in this  
User Manual.  
3. Within a few seconds, the tray icon in the lower,  
right-hand corner of your screen should turn green,  
indicating a successful connection to the network.  
If you are still unable to access the Internet after connecting to  
the wireless network, please contact Belkin Technical Support.  
The name of your wireless network DOES NOT appear  
in “Network List”  
If the correct network name is not listed, check the SSID settings  
to see if they match. The SSID is case-sensitive and the spelling  
on each computer must be exactly the same in order for the Card  
to connect to the wireless router or access point.  
NOTE: To check the SSID settings or look for an available  
network, double-click the Signal Indicator icon to bring up the  
“Network List” window. Click “Create” if you do not see the  
network you are trying to connect to and type in the SSID. For  
more information about setting up a SSID, please reference your  
router manufacturer’s user manual. If issues persist even at close  
range, please contact Belkin Technical Support.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Installation CD-ROM does not start the Wireless  
Client Utility  
If the CD-ROM does not start the Wireless Client Utility  
automatically, it could be that the computer is running other  
applications that are interfering with the CD drive.  
If the Wireless Client Utility Setup screen does not appear within  
15–20 seconds, open up your CD-ROM drive by double-clicking on  
the “My Computer” icon. Next, double-click on the CD-ROM drive  
that the Installation CD has been placed in to start the installation.  
Then double-click on the folder named “Files”. Next, double-click on  
the icon named “setup.exe”.  
Power LED does not come ON; Card is not working  
If the LED indicators are not ON, the problem may be that the  
Card is not connected or installed properly. Verify that the Card is  
plugged firmly into the CardBus slot of your computer. Check to  
see that the drivers for the Card have been installed. Right-click on  
the “My Computer” icon on your desktop. Choose “Properties” and  
navigate to the “Device Manager” and see if your CardBus Card  
is listed without any errors. If an error is indicated, contact Belkin  
Technical Support.  
Link LED is blinking slowly; cannot connect to a wireless  
network or the Internet  
If your Card appears to be functioning properly, but you cannot  
connect to a network or you have a red wireless icon at the bottom  
of your screen, the problem may be that there is a mismatch  
between the network name (SSID) settings in your wireless  
network properties.  
Check the SSID settings to see if they match. The SSID is  
case-sensitive and the spelling on each computer must be exactly  
the same in order for the Card to connect to the wireless router or  
access point.  
Note: To check the SSID settings or look for an available network,  
double-click the Signal Indicator icon to bring up the “Network List”  
window. Click “Create” if you do not see the network you are trying  
to connect to and type in the SSID.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
1
2
3
4
5
6
For more information about setting up a SSID, please reference  
your router manufacturer’s user manual. If issues persist even at  
close range, please contact Belkin Technical Support.  
Link LED is solid but cannot connect to the Internet  
If you have a signal but can’t get online or obtain an IP address,  
the problem may be that there is a mismatch between the  
encryption key settings in your computer and wireless router or  
access point.  
Check the WEP key settings to see if they match. The key is  
case-sensitive and the spelling on each computer and wireless  
router or access point must be exactly the same in order for  
the Card to connect to the router. For more information about  
encryption, please see “Securing your Wi-Fi Network” of this  
User Manual.  
If issues persist even at close range, please contact Belkin  
Technical Support.  
Data transfer is sometimes slow  
Wireless technology is radio-based, which means connectivity  
and the throughput performance between devices decreases  
when the distance between devices increases. Other factors that  
will cause signal degradation (metal is generally the worst culprit)  
are obstructions such as walls and metal appliances. As a result,  
the typical indoor range of your wireless devices will be between  
100 to 200 feet. Note also that connection speed may decrease  
as you move further from the wireless router or access point.  
In order to determine if wireless issues are related to range, we  
suggest temporarily moving the computer, if possible, to five to  
10 feet from the wireless router or access point. Please see the  
section titled “Placement of your Wireless Networking Hardware  
for Optimal Performance” of this User Manual. If issues persist  
even at close range, please contact Belkin Technical Support.  
Signal strength is poor  
Wireless technology is radio-based, which means connectivity  
and the throughput performance between devices decreases  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
when the distance between devices increases. Other factors that  
can cause signal degradation are obstructions such as walls and  
metal appliances (metal is generally the worst culprit). As a result,  
the typical indoor range of your wireless devices will be between  
100 to 200 feet. Note also that connection speed may decrease as  
you move further from the wireless router or access point.  
In order to determine if wireless issues are related to range, we  
suggest temporarily moving the computer, if possible, to five to 10  
feet from the wireless router or access point.  
Changing the wireless channel – Depending on local wireless  
traffic and interference, switching the wireless channel of your  
network can improve performance and reliability. The default  
channel the router is shipped with is channel 11; however, you may  
choose from several other channels depending on your region. See  
your router or access point’s user manual for instructions on how to  
choose other channels.  
Limiting the wireless transmit rate – Limiting the wireless  
transmit rate can help improve the maximum wireless range and  
connection stability. Most wireless cards have the ability to limit  
the transmission rate. To change this property, go to the Windows  
Control Panel, open “Network Connections” and double-click on  
your Wireless Card’s connection. In the Properties dialog, select  
“Configure” on the General tab (Windows 98 users will have to  
select the Wireless Card in the list box and then click “Properties”),  
then choose the Advanced tab and select the “Rate property”.  
Wireless client cards are usually set to automatically adjust the  
wireless transmit rate for you, but doing so can cause periodic  
disconnects when the wireless signal is too weak; as a rule, slower  
transmission rates are more stable. Experiment with different  
connection rates until you find the best one for your environment;  
note that all available transmission rates should be acceptable for  
browsing the Internet.  
If issues persist even at close range, please contact Belkin  
Technical Support.  
Why are there two wireless utilities in my system tray?  
Which one do we use?  
There are several features and advantages from using the Belkin  
Wireless Client Utility over the Windows Wireless Network Utility.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
1
2
3
4
5
6
We offer a Site Survey, detailed link information, and adapter  
diagnosis, to name a few.  
It’s essential to know which utility is managing your Card. We  
recommend using the Belkin Wireless Client Utility.  
To use the Belkin Wireless Client Utility, follow the steps below:  
Step 1 Right-click on the network status icon in the system tray  
and select “View Available Wireless Networks”.  
Step 2 Click on “Advanced” in the lower-left corner of the  
Available Wireless Networks window.  
Step 3 From the Advanced tab, uncheck “Use Windows to  
configure my wireless network”. Once the box is unchecked, click  
“OK” to close the window.  
You are now using the Belkin Wireless Client Utility to configure  
the Wireless Card.  
The Card does not perform or connection is unstable  
when computer has a second built-in wireless network  
®
card (such as a mini PCI or Intel Centrino
)  
This condition occurs if your computer has a built-in wireless  
card while your Belkin Wireless Card is also active. This  
happens because Windows must now handle two active  
wireless connections.  
You need to disable the built-in wireless card from your computer  
under “Network Adapters” in the Device Manager.  
The Card does not perform or connection is slow when  
computer has a built-in wired Ethernet card  
This condition occurs if your computer has an active Ethernet  
card while your Belkin Wireless Card is also active. This  
happens because Windows must now handle two active  
network connections.  
You need to disable the Ethernet card from your computer under  
“Network Adapters” in the Device Manager.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
What’s the difference between 802.11b, 802.11g, 802.11a,  
and Pre-N?  
Currently there are four levels of wireless networking standards,  
which transmit data at very different maximum speeds. Each is  
based on the designation 802.11(x), so named by the IEEE, the  
board that is responsible for certifying networking standards. The  
most common wireless networking standard, 802.11b, transmits  
information at 11Mbps; 802.11a and 802.11g work at 54Mbps; and  
Pre-N works at 108Mbps. Pre-N, the precursor to the upcoming  
802.11n release, promises speeds that exceed 802.11g, and up to  
twice the wireless coverage area. See the following chart for more  
detailed information.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
1
2
3
4
5
6
Wireless Comparison Chart  
Speed 11Mbps  
54Mbps  
54Mbps  
108Mbps  
Common  
Common  
Common  
household  
household  
devices such  
as cordless  
phones and  
microwave  
ovens may  
household  
devices such  
as cordless  
phones and  
microwave  
ovens may  
devices such  
as cordless  
phones and  
microwave  
ovens may  
interfere with  
the unlicensed  
band 2.4GHz  
5GHz -  
uncrowded  
band  
interfere with interfere with  
the unlicensed the unlicensed  
band 2.4GHz  
band 2.4GHz  
Incompatible Compatible  
with 802.11b with 802.11g  
Compatible  
with 802.11g  
Compatible  
with 802.11b  
or 802.11g  
or 802.11b  
Depends on  
interference  
- typically  
100–200 ft.  
indoors  
Depends on  
interference  
- typically  
100–200 ft.  
indoors  
Less  
8x the  
interference  
- range is  
typically  
50-100 ft.  
coverage  
of standard  
802.11g  
Slow  
Expected  
to continue  
widely adopted to grow in  
popularity  
adoption for Expected  
consumers - to continue  
more popular to grow in  
in business popularity  
environments  
Mature –  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Technical Support  
You can find technical support information at www.belkin.com or  
www.belkin.com/networking. If you want to contact technical support  
by phone, please call:  
US: 877.736.5771  
310.898.1100 ext. 2263  
Europe: 00 800 223 55 460  
Australia: 1800 235 546  
New Zealand: 0800 235 546  
Singapore: 800 616 1790  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
1
2
3
4
5
6
FCC Statement  
Caution: Exposure to Radio Frequency Radiation.  
The radiated output power of this device is far below the FCC radio frequency  
exposure limits. Nevertheless, the device shall be used in such manner that  
the potential for human contact during normal operation is minimized.  
When connecting an external antenna to the device, the antenna shall be  
placed in such a manner to minimize the potential for human contact during  
normal operation. In order to avoid the possibility of exceeding the FCC radio  
frequency exposure limits, human proximity to the antenna shall not be less  
than 20cm (8 inches) during normal operation.  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
This equipment generates, uses, and can radiate radio frequency energy. If  
this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try and correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and the receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or modifications to  
this device that are not expressly approved by Belkin Corporation may void the  
user’s authority to operate the equipment.  
Canada-Industry Canada (IC)  
The wireless radio of this device complies with RSS 139 & RSS 210 Industry  
Canada. This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.  
Europe-European Union Notice  
Radio products with the CE 0682 or CE alert marking  
comply with the R&TTE Directive (1995/5/EC) issued by the  
Commission of the European Community.  
Compliance with this directive implies conformity to the following European  
Norms (in brackets are the equivalent international standards).  
EN 60950 (IEC60950) – Product Safety  
EN 300 328 Technical requirement for radio equipment  
ETS 300 826 General EMC requirements for radio equipment.  
To determine the type of transmitter, check the identification label on your  
Belkin product.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
1
2
3
4
5
6
Products with the CE marking comply with the EMC Directive (89/336/EEC)  
and the Low Voltage Directive (72/23/EEC) issued by the Commission of  
the European Community. Compliance with these directives implies  
conformity to the following European Norms (in brackets are the equivalent  
international standards).  
EN 55022 (CISPR 22) – Electromagnetic Interference  
EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity  
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics  
EN 61000-3-3 (IEC610000) – Power Line Flicker  
EN 60950 (IEC60950) – Product Safety  
Products that contain the radio transmitter are labeled with CE 0682 or CE  
alert marking and may also carry the CE logo.  
Belkin Corporation Limited Lifetime Product Warranty  
Belkin Corporation warrants this product against defects in materials and  
workmanship for its lifetime. If a defect is discovered, Belkin will, at its option,  
repair or replace the product at no charge provided it is returned during the  
warranty period, with transportation charges prepaid, to the authorized Belkin  
dealer from whom you purchased the product. Proof of purchase may be  
required.  
This warranty does not apply if the product has been damaged by accident,  
abuse, misuse, or misapplication; if the product has been modified without  
the written permission of Belkin; or if any Belkin serial number has been  
removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE  
IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED  
OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED  
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification,  
extension, or addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF  
WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT  
NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO  
OR REPROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA  
STORED IN, OR USED WITH, BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages or exclusions of implied warranties, so the above  
limitations or exclusions may not apply to you. This warranty gives you  
specific legal rights, and you may also have other rights that vary from state  
to state.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
Wi-FI® Interoperability Certificate  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Pre-N  
Notebook Network Card  
Belkin Tech Support  
Belkin Ltd.  
US: 310-898-1100 ext. 2263  
800-223-5546 ext. 2263  
Europe: 00 800 223 55 460  
Australia: 1800 235 546  
New Zealand: 0800 235 546  
7 Bowen Crescent  
West Gosford, NSW 2250, Australia  
Tel: +61 (0) 2 4372 8600  
Fax: +61 (0) 2 4372 8603  
Belkin B.V.  
Belkin Corporation  
Boeing Avenue 333  
501 West Walnut Street  
Compton, CA 90220-5221, USA  
Tel: 310-898-1100  
1119 PH Schiphol-Rijk, The Netherlands  
Tel: +31 (0) 20 654 7300  
Fax: +31 (0) 20 654 7349  
Fax: 310-898-1111  
Belkin Ltd.  
Express Business Park  
Shipton Way, Rushden, NN10 6GL  
United Kingdom  
Tel: +44 (0) 1933 35 2000  
Fax: +44 (0) 1933 31 2000  
© 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks of  
respective manufacturers listed. The True MIMO logo is a trademark of Airgo Networks, Inc.  
The mark Wi-Fi and the Wi-Fi logo are registered marks of the Wi-Fi Alliance.  
P74641-A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bionaire Electric Heater BCH9208 User Manual
Black Decker Heat Gun HEAT PRO User Manual
Bowflex Home Gym Conquest User Manual
Brookstone Headphones 683417 User Manual
Bush Hog Brush Cutter 4215 User Manual
Carrier Portable Generator ASPBA1CCA016 User Manual
CDA Freezer FW282 User Manual
Celestron Telescope 11055 User Manual
Chamberlain Home Security System 377LM User Manual
Cisco Systems IP Phone OL 19025 01 User Manual