Braun Hair Clippers ST 750 User Manual

Satin·Hair 7  
S a t i n  
H a i r  
7
C o l o u r  
ST 750  
Download from Www.Somanuals.com. All Manuals Search And Download  
Satin Hair 7 Colour  
D
E
F
thick  
normal  
fine  
thick  
normal  
fine  
auto off  
I
s a t i n h a i r c o l o u r  
Download from Www.Somanuals.com. All Manuals Search And Download  
3
Download from Www.Somanuals.com. All Manuals Search And Download  
4
Download from Www.Somanuals.com. All Manuals Search And Download  
5
Download from Www.Somanuals.com. All Manuals Search And Download  
6
Download from Www.Somanuals.com. All Manuals Search And Download  
7
English  
Please read these use instructions carefully before use and  
keep them for future reference.  
Important  
• Plug your appliance into an alternating current outlet only  
and make sure that your household voltage corresponds  
to the voltage printed on the appliance.  
This appliance must never be used near water (e.g. a  
filled wash basin, bathtub or shower). Do not allow the  
appliance to get wet.  
• For additional protection, it is advisable to install a residual  
current device (RCD) with a rated residual operating  
current not exceeding 30 mA in the electrical circuit of  
your bathroom. Ask your installer for advice.  
• This appliance is not intended for use by children or  
persons with reduced physical, sensory or mental  
capabilities, unless they are given supervision by a person  
responsible for their safety. In general, we recommend that  
you keep the appliance out of reach of children. Children  
should be supervised to ensure that they do not play with  
the appliance.  
• Avoid touching the hot parts of the appliance.  
• When hot, do not place on surfaces that are not heat-  
resistant.  
• Do not wrap the mains cord around the appliance.  
Regularly check the mains cord for wear or damage. If the  
cord is damaged, stop using the appliance and take it to  
an authorized Braun Service Centre. Unqualified repair  
work can lead to extreme hazards for the user.  
• The appliance should be used on dry hair only.  
Be careful when using the appliance at maximum  
temperature.  
Description  
1
2
3
4
5
6
7
8
Cool touch  
Display  
Hair type selector («–/+»)  
«boost» button  
on/off button  
Swivel cord (2 m length)  
Ion jets  
NanoGlide Ceramic plates  
Colour Saver Technology  
Colour Saver Technology with satin ions maintains the  
precious health of colored hair as it protects your hair from  
dry out and damage and prevents moisture loss of coloured  
hair by up to 50%* while styling. As satin ions are released  
onto your hair a slight crackling noise can be heard.  
For beautiful smooth and sleek hair that looks more healthy  
and radiantly vibrant for longer.  
* compared to usage of an appliance without Colour Saver  
Technology  
Getting started  
• Connect the appliance to an electrical outlet and push the  
on/off button (5) for 1 second to turn it on.  
• During heat up, the display turns orange/red. The appli-  
ance is delivered with a default setting for normal hair,  
medium. The thermometer symbol is flashing [A] as long  
as the temperature for the displayed setting is not  
reached.  
• After approx. 30 seconds, the display turns green to  
indicate that you can start using the appliance. As soon  
Download from Www.Somanuals.com. All Manuals Search And Download  
8
as the temperature for the selected setting is reached, the  
thermometer symbol stops flashing.  
• Personalized settings: Using the hair type selectors (3),  
you can adjust the temperature for fine, normal and thick  
hair. Within each hair type, you have the choice between  
a low, medium and high setting.  
• When changing the hair type setting, the display turns  
orange/red and the thermometer symbol flashes again.  
When the display turns green, you can go ahead with  
styling.  
• «boost» function: For handling difficult hair strands, you  
can instantly increase the operating temperature by  
pushing the «boost» button (4). For 20 seconds, the  
appliance will increase its temperature by 20 °C with the  
backlight flashing. Afterwards, the appliance switches  
back to the previously selected temperature.  
• Safety auto off: For safety reasons, the appliance  
automatically switches off after 30 minutes. Five minutes  
prior to switching off, the display shows «auto off» [E]  
along with a red flashing backlight. If you want to keep on  
straightening, simply press the on/off button (5) again  
shortly.  
• Memory function: In order to make your styling session as  
convenient and quick as possible, the appliance stores  
your last personalised settings for the next usage.  
Styling  
Preparation  
• Make sure your hair is completely dry before using the  
appliance.  
• First, comb your hair through with a wide toothed comb to  
remove tangles [G].  
• Section your hair off. Starting close to the roots, take a  
thin section of hair (strands of 3–4 cm maximum) and  
clamp it firmly between the styling plates [H].  
How to straighten your hair  
• Gently run the straightener through the entire length of the  
hair, slowly and steadily, from roots to the ends [I] without  
stopping for longer than 2 seconds. This will ensure best  
straightening results without damaging your hair. Since the  
NanoGlide Ceramic plates are 3 times smoother than  
conventional ceramic plates, they protect your hair from  
damage by providing friction-free gliding.  
• For improved control when gliding along a strand, you  
may stabilise the appliance by holding it with the other  
hand on the cool touch points (1).  
You can create flicks at the hair ends by slowly turning the  
appliance either outwards or inwards before releasing a  
strand.  
How to form curls  
With the Braun satinliner, you can also create loose curls and  
waves [J]:  
– Clamp a strand at the roots,  
– turn the appliance half a turn,  
– then slowly move the appliance horizontally towards hair  
ends and the strand will turn into curl.  
After use  
After each use, switch off the appliance by pushing the  
on/off button (5) for 1 second.  
Residual heat indicator  
As long as the appliance is not unplugged, the display turns  
red and shows the cooling down symbol [F] during the  
cooling down phase. Only when the temperature has  
dropped below 60 °C, the display switches off and you can  
touch the appliance without any risk.  
Download from Www.Somanuals.com. All Manuals Search And Download  
9
Cleaning  
Always unplug before cleaning. Never immerse the appliance  
in water.  
Clean the appliance with a damp cloth and use a soft cloth to  
dry.  
Subject to change without notice.  
Please do not dispose of the product in the household  
waste at the end of its useful life. Disposal can take  
place at a Braun Service Centre or at appropriate  
collection points provided in your country.  
99571424/V-10  
China/GB  
Download from Www.Somanuals.com. All Manuals Search And Download  
10  

Bosch Appliances Security Camera VDN 0498 User Manual
Bosch Power Tools Cordless Drill 11536C User Manual
Braun Hair Dryer SPI C 2000 DF User Manual
Brinkmann Gas Grill Austin User Manual
Brother Printer PT 2600 User Manual
Brother Sewing Machine 885 V31 V33 User Manual
Bush Hog Lawn Aerator 720 User Manual
Bushnell Telescope 181561 User Manual
Capresso Coffeemaker CS10 User Manual
Cisco Systems Network Card HWIC 1FE User Manual