OCTOBER 2007
KV7020A
KV7021A
2- and 4-Port ServSwitch DT Pro II
CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com
•
E-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
NORMAS OFICIALES MEXICANAS (NOM)
ELECTRICAL SAFETY STATEMENT
INSTRUCCIONES DE SEGURIDAD
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de
que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para
referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de
operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca
de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc..
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que
sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea
recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá
a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser
referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no
interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,
alfombra o superficie similar puede bloquea la ventilación, no se debe colocar
en libreros o gabinetes que impidan el flujo de aire por los orificios de
ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor
como radiadores, registros de calor, estufas u otros aparatos (incluyendo
amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del
tipo descrito en el instructivo de operación, o como se indique en el aparato.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
NOM STATEMENT
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización
del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no
sean pisados ni pellizcados por objetos colocados sobre o contra ellos,
poniendo particular atención a los contactos y receptáculos donde salen del
aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las
recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas
de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea
usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean
derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
TRADEMARKS USED IN THIS MANUAL
iMac, Mac, Macintosh, and Mac OS are registered trademarks of Apple Computer,
Inc.
BLACK BOX and the Double Diamond logo are registered trademarks, and
ServSwitch is a trademark of BB Technologies, Inc.
PS/2 is a registered trademark of International Business Machines Corporation.
Linux is a registered trademark of Linus Torvalds.
IntelliMouse, Microsoft, Windows, and Windows NT are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
NetWare and Novell are registered trademarks of Novell, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the
trademark owners.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Contents
Chapter
Page
1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2.1 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2.2 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3 What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.4 What You’ll Need to Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.1 ServSwitch Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2.1 Connecting the Console. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2.2 Powering On the ServSwitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2.3 Connecting the Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2.4 Connecting the USB Peripherals. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1 Powering Up the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.2 Selecting Computers Using Front-Panel Buttons . . . . . . . . . . . . . . . . . . 17
4.3 Selecting Computers Using Keyboard Hotkey Commands . . . . . . . . . . 17
Appendix. Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A.1 Calling Black Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A.2 Shipping and Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
1. Specifications
Resolution: 2048 x 1536
®
®
Supported Operating Systems: Windows 98/Me/2000/XP and Windows NT ,
Linux , NetWare , Mac OS
®
®
®
Hotkeys: Yes
User Controls: KV7020A: (2) port selection buttons;
KV7021A: (4) port selection buttons
®
Connectors: KV7020A: Computer end: PS/2 keyboard, PS/2 mouse, VGA Video:
(2) HD15 female,
USB keyboard, mouse, and peripherals: (2) USB Type B female,
Microphones/speakers: (4) 3.5-mm jacks;
Console end: Keyboard: (1) 6-pin mini-DIN female or (1) USB Type A female,
Mouse: (1) 6-pin mini-DIN female or (1) USB Type A female,
Monitor: (1) HD15 female,
USB peripherals: (2) USB Type A female,
Microphone/speaker: (2) 3.5-mm jacks,
Power: (1) barrel connector;
KV7021A: Computer end: PS/2 keyboard, PS/2 mouse, and VGA video:
(4) HD15 female,
USB keyboard, mouse, and peripherals: (4) USB Type B female,
Microphones/speakers: (8) 3.5-mm jacks;
Console end: Keyboard: (1) 6-pin mini-DIN female or (1) USB Type A female,
Mouse: (1) 6-pin mini-DIN female or (1) USB Type A female,
Monitor: (1) HD15 female,
USB peripherals: (2) USB Type A female,
Microphone/speaker: (2) 3.5-mm jacks,
Power: (1) barrel connector
Indicators: KV7020A: (2) Port LEDs, (2) Hub LEDs;
KV7021A: (4) Port LEDs, (4) Hub LEDs
Temperature Tolerance: Operating: 32 to 104°F (0 to 40°C);
Storage: -4 to +140°F (-20 to +60°C)
Relative Humidity: Up to 80%, noncondensing
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1: Specifications
Power: 9-VDC power supply
Size: KV7020A: 1.8"H x 5.4"W x 3.5"D (4.5 x 13.8 x 9.1 cm);
KV7021A: 1.8"H x 8.7"W x 4.1"D (4.5 x 22 x 10.5 cm)
Weight: KV7020A: 1.8 lb. (0.8 kg);
KV7021A: 2 lb. (0.9 kg)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
2. Overview
2.1 Introduction
™
The 2- or 4-Port ServSwitch DT Pro II KVM Switch is the most comprehensive
desktop switch to date. It’s flexible: Use it to connect a PS/2 keyboard, video, and
mouse to PS/2 CPUs, USB KVM to PS/2 CPUs, PS/2 KVM to USB CPUs, or USB
®
®
KVM to USB CPUs. Supported mice include Microsoft IntelliMouse and other
mice, and the ServSwitch unit’s USB ports comply with USB 2.0 requirements.
Plus, you can connect audio and USB 2.0 peripherals to the KVM switch.
Using a hotkey command sequence (see Section 4.3), you can asynchronously
switch the KVM control and the USB devices. And the ServSwitch works with
®
common operating systems, including Windows 98/Me/2000/XP, Windows NT ,
®
Linux, Novell NetWare, and Mac OS.
Setup is fast and simple, and there’s no software to configure. Its small desktop
footprint is ideal for on or under your desktop. Use either front-panel buttons on
the ServSwitch or hotkeys (which are key sequences on your keyboard) to select
ports or start AutoScan. The front-panel buttons include integral LEDs. The LED
will light with the corresponding active port when manually switching between the
computers. The ServSwitch beeps to confirm that it’s in hotkey mode. The
AutoScan function enables you to automatically scan and monitor all computers,
one by one, that are connected to the ServSwitch.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Overview
2.2 Components
2.2.1 FRONT PANEL
Figure 2-1 shows the 2- and 4-Port ServSwitch front views. Table 2-1 describes the
components numbered in the illustration.
❷
❸
❹
❷
❸
❶
❶
❹
Figure 2-1. The ServSwitch front-panel views.
Table 2-1. Front-panel components.
Component
Description
❶ 6-pin mini-DIN connectors
PS/2 keyboard and mouse ports.
Press to select a computer.
❷
❸
Direct-access port buttons
Port LEDs and Hub LEDs
Port LEDs located below the port
buttons light when the connected
computer is selected. Hub LEDs light to
indicate which port has the hub control.
❹ USB ports
USB keyboard and mouse ports.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
2.2.2 REAR PANEL
Figure 2-2 shows the 2- and 4-Port ServSwitch rear views. Table 2-2 describes the
components numbered in the illustration.
❻
❺
❿
❾
❼
❼
❽
❼ ❽
❻
❺
❾
❼
❼
❼
❽
❽
❽
❽
❿
Figure 2-2. The ServSwitch back-panel views.
Table 2-2. Rear-panel components.
Component
Description
❺
❻
Console VGA port
Computer VGA ports
Attaches to the user monitor.
Connect to a computer’s video cards and
keyboard and mouse when used with PS/2
computers.
Computer USB 1.1
Link to a computer’s USB 1.1 keyboard and
mouse ports.
❼
❽
❾
❿
keyboard/mouse port
Computer speaker/
microphone ports
Attach the computer’s speaker and microphone
ports. (Two leftmost audio ports are for console.)
Power connector
USB hub ports
Connects to a 9-VDC power supply
(required).
Connects to USB hub or peripherals.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Overview
2.3 What’s Included
The KV7020A or KV7021A package should contain the following items. If anything
is missing or damaged, please contact Black Box.
• (1) 2- or 4-Port ServSwitch DT Pro II KVM Switch
• (1) Power supply for U.S., Europe, Great Britain, and Australia
• This user’s manual
2.4 What You’ll Need to Supply
• ServSwitch DT Pro II Cable (EHN7002021-0006, -0009, -0015): These cables
connect to PCs that have PS/2 or USB and VGA connectors. The cables are
available in 6-, 9-, and 15-foot (1.8-, 2.7-, and 4.5-m) versions. However, the
USB 2.0 specification only allows a valid USB connection within a 6-foot
(1.8-m) cabling distance.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
3. Installation
3.1 ServSwitch Placement
The 2- or 4-Port ServSwitch DT Pro II KVM Switch is small, portable, and designed
to fit on a desktop. Consider the following when deciding where to place the KVM
switch:
• How long are the cables attached to your keyboard, mouse, and monitor?
• How far away are the computers from the console?
• How long are the cables you use to connect your computers to the ServSwitch?
CAUTION
Do not place cables near machines that create electrical noise such as
fluorescent lighting, air conditioning equipment, etc.
3.2 Hardware Installation
This section provides instructions for the basic hardware setup of a single
ServSwitch.
CAUTION
Before you begin, make sure that power to all the devices that you will
be connecting is turned off.
To prevent damage caused by ground potential differences, make sure
that all devices are properly grounded. If you don’t follow these
instructions, your computers and/or the ServSwitch could be damaged.
3.2.1 CONNECTING THE CONSOLE
1. Power off all computers.
2. Connect your USB keyboard and USB mouse or PS/2 keyboard and PS/2
mouse directly to the USB or PS/2 keyboard and mouse ports (labeled with
keyboard and mouse symbols) on the front of the ServSwitch. USB
connections are shown in Figure 3-1.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Installation
4-Port ServSwitch
DT Pro KVM Switch
(KV7021A)
Keyboard
Mouse
Figure 3-1. Keyboard and mouse connections.
3. Connect the HD15 VGA male connector from your monitor to the console
VGA port on the back of the ServSwitch. See Figure 3-2.
Monitor
4-Port ServSwitch
DT Pro KVM Switch
(KV7021A)
Figure 3-2. Console connections.
4. Connect the speaker and microphone connectors from your computer to the
audio ports on the back of the unit. See Figure 3-3.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
Figure 3-3. Audio connections.
3.2.2 POWERING ON THE SERVSWITCH
Connect the 9-VDC power adapter’s barrel connector to the power jack on the rear
of the switch. Then plug the power adapter cable into an available power outlet.
See Figure 3-4.
9-VDC power
adapter
Figure 3-4. Power connections.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Installation
3.2.3 CONNECTING THE COMPUTERS
USB Installation
1. Connect the ServSwitch DT Pro II’s USB cable’s (EHN7002021-0006) USB
connector to the PC1 USB port on the back of the ServSwitch. Connect the
cable’s VGA connector to the ServSwitch unit’s PC1 VGA connector. See
Figure 3-5.
2. Connect the cable’s male VGA and USB connectors to the corresponding
connectors on the back of the computer.
USB
USB, VGA, and
audio connectors
on the computer
Figure 3-5. USB computer connections.
3. Repeat steps 1 and 2 for all computers.
4. Power on your computers. Your computers’ operating systems should
recognize the ServSwitch and will automatically install the USB driver if it was
not already installed on your computers.
NOTE
On some computers, you must enable USB support on your system
BIOS. Please refer to your computer manufacturer’s manual or the
motherboard manual to verify that USB support is enabled.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
3.2.4 CONNECTING THE USB PERIPHERALS
Attach up to two USB peripherals to the USB Type A connectors on the
ServSwitch. See Figure 3-6.
NOTE
You can attach a USB keyboard and mouse, but hotkey switching will
not be enabled for these connections.
USB peripherals
Figure 3-6. USB peripheral connections.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Operation
4. Operation
4.1 Powering Up the System
Once all cables have been connected and all computers have been powered on,
the ServSwitch emulates mouse and keyboard signals on each port, enabling your
computer to boot normally. The ServSwitch is now ready for use.
4.2 Selecting Computers Using Front-Panel Buttons
You can instantly select any computer by pressing the port selector buttons on the
front panel. The corresponding LED will light when the port is selected.
4.3 Selecting Computers Using Keyboard Hotkey Commands
To directly switch the KVM control to any computer via the simple keyboard
command sequence, press the <Left-Ctrl> key twice and the <up-arrow> or
<down-arrow> keys.
1. To invoke the hotkey mode, press the <Left-Ctrl> key twice within two
seconds. The switch will beep to indicate that it’s in hotkey mode.
2. Press the <up-arrow> or <down-arrow> keys to switch to the previous or next
port, respectively.
Table 4-1 lists the hotkey commands.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
Table 4-1. Hotkey commands.
Command
Command/Description
<Left-Ctrl><Left-Ctrl> x
Select PC channel. Select active PC
channel.(x is a top-row number key)
x=1–2 or 1–4 for PC channel number
<Left-Ctrl><Left-Ctrl> (Fx)
Select hub port control. Select the
specific PC + USB hub port control—
works only if PC port/hub port control
binding is enabled.
Fx=F1–F2 or F1–F4 (Fx is a function
key); x=1–2 or 1–4 for PC channel
number
<Left-Ctrl><Left-Ctrl> (Fy)
Select audio + microphone channel.
Select the active audio and microphone
channel. (Joint-select PC/hub port
control/audio and microphone, if binding
is enabled.)
Fy=F5–F6 or F5–F8 (Fy is a function
key); y=1–2 or 1–4 for audio/
microphone channel number
<Left-Ctrl><Left-Ctrl> + Z
Bind PC and hub port control
switching. Enable the binding of PC
port and hub port control switching.
(Once this feature is enabled, any PC
and/or hub port control switching is
bound together.) (factory default)
<Left-Ctrl><Left-Ctrl> + X
Unbind PC and hub port control
switching. Disable the binding of PC
port and hub port control switching.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Operation
Table 4-1 (continued). Hotkey commands.
Command
Command/Description
<Left-Ctrl><Left-Ctrl> Q
Bind PC and audio/microphone
switching. Enable the binding of PC
port and audio/microphone switching.
(Once enabled, any PC and/or
audio/microphone switching is bound
together. (This is the factory default.)
<Left-Ctrl><Left-Ctrl> W
Unbind PC and audio/microphone
switching. Disable the binding of PC
port and audio/microphone switching.
<Left-Ctrl><Left-Ctrl> <up-arrow>
Next lower PC channel. Select the
next lower PC channel. (Joint-select
PC/hub port control/audio and
microphone, if binding is enabled.)
<Left-Ctrl><Left-Ctrl> <down-arrow>
Next higher PC channel. Select the
next active PC. (Joint-select PC/hub
port control/audio and microphone, if
binding is enabled.)
<Left-Ctrl><Left-Ctrl> <backspace>
<Left-Ctrl><Left-Ctrl> B
Previous PC channel. Toggle between
the previous channel and current
channel.
Beep sound on/off. Toggle on/off the
beep sound for hotkey and
autoscanning.
<Left-Ctrl><Left-Ctrl> H + y
Define hotkey preceding sequence.
Select the hotkey preceding sequence
among six alternative keys:
y=Scroll Lock, Caps, Esc, F12,
Num-Lock, Left-Ctrl.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2- AND 4-PORT SERVSWITCH DT PRO II
Table 4-1 (continued). Hotkey commands.
Command
Command/Description
<Left-Ctrl><Left-Ctrl> S
Autoscan. Autoscan through every
connected channel for quick screen
browsing of each channel (scan
delay=10 seconds).
<Left-Ctrl><Left-Ctrl> S + z
Autoscan with programmable delay
time. Autoscan with a user-defined
delay time within a range of 10 to 100
seconds.
z=0-9 for 10, 20, 30, 40, 50, 60, 70, 80,
90, or 100 seconds
Press any key on keyboard.
<Left-Ctrl><Left-Ctrl> V
Stop Autoscan.
Show the current unit’s resident
firmware number. You must open a
text editor window (such as Wordpad)
so that the character string can be
output to the windows.
NOTE
After switching ports, there is a delay of up to 2 seconds before the
video displays. This is normal and is because of the video signal’s
refresh rate.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX: Troubleshooting
Appendix. Troubleshooting
A.1 Calling Black Box
If you determine that your 2- or 4-Port ServSwitch DT Pro II KVM Switch is
malfunctioning, do not attempt to alter or repair the unit. It contains no user-
serviceable parts. Contact Black Box at 724-746-5500.
Before you do, make a record of the history of the problem. We will be able to
provide more efficient and accurate assistance if you have a complete description,
including:
• the nature and duration of the problem.
• when the problem occurs.
• the components involved in the problem.
• any particular application that, when used, appears to create the problem or
make it worse.
A.2 Shipping and Packaging
If you need to transport or ship your 2- or 4-Port ServSwitch DT Pro II KVM Switch:
• Package it carefully. We recommend that you use the original container.
• If you are shipping the 2- or 4-Port ServSwitch DT Pro II KVM Switch for
repair, make sure you include everything that came in the original package.
Before you ship, contact Black Box to get a Return Authorization (RA)
number.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
© Copyright 2007. Black Box Corporation. All rights reserved.
1000 Park Drive
•
Lawrence, PA 15055-1018
•
724-746-5500
•
Fax 724-746-0746
Download from Www.Somanuals.com. All Manuals Search And Download.
|