5207, 9749, & 7786 SEriES
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
assembly
1. slide flex hose clip into the opening on the
front of the machine until you hear a “snap.”
2. snap the hose grip bracket into the back of
machine on the clean tank side. Wrap flex hose
around unit and snap hose grip into bracket.
3. Attach cord wrap by snapping it into place
on the dirty water tank side of the machine.
Wrap power cord around cord wrap.
Quick prep Steps
1. Unwrap hose and select desired tool.
Tool easily snaps onto hose.
2. Remove tank from tool side of unit. Pull on
the black tab to remove rubber stopper and
reveal tank opening.
3. Your tank is marked for a large stain or a small
stain. based on your cleaning need, fill with hot
tap water to the water fill line. Addbissell 2X
formula to the formula fill line.
4. Replace rubber stopper, then replace the tank
on the machine.
5. Twist the quick release cord wrap to release
the cord, plug in, and you’re ready to spot
clean!
Guidelines to Spot clean
1. Hold the tool 1 inch above soiled surface and spray
trigger to apply cleaning formula.
2. Gently scrub the area with brush on tool.
3. Apply downward pressure to the tool and pull it
toward you to suction up the dirt and cleaning
formula. Continue until no more dirt can be removed.
cleaning formula
›› Always use genuine bissell portable deep cleaning
formulas. Non-bissell cleaning solutions may harm
the machine and will void the warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
800.237.7691
3
Than sor buying a BISSELL portable dep cleaer
We’re glad you purchased a
Safety instructions. . . . . . . . . . .2
Quick Start Guide. . . . . . . . . . . .3
Product View. . . . . . . . . . . . . . . .5
Assembly. . . . . . . . . . . . . . . . . . . 6
Operations. . . . . . . . . . . . . . . . 6-7
Maintenance & Care . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . .9
Accessories . . . . . . . . . . . . . . . . 10
Warranty . . . . . . . . . . . . . . . . . . . .11
Consumer Care. . . . . . . . . . . . . .11
Product registration. . . . . . . . 12
BiSSELL SpotClean deep cleaner.
Everything we know about floor
care went into the design and
construction of this complete,
high-tech home cleaning system.
Your BiSSELL SpotClean deep cleaner
is well made, and we back it with a
limited two year warranty. We also
stand behind it with a knowledgeable,
dedicated Consumer Care
department, so, should you ever
have a problem, you’ll receive fast,
considerate assistance.
My great-grandfather invented the
floor sweeper in 1876. Today, BiSSELL
is a global leader in the design,
manufacture, and service of high
quality homecare products like your
BiSSELL SpotClean deep cleaner.
Thanks again, from all of us at
BiSSELL.
Mark J. Bissell
Chairman & CEO
» Deep cleaning stairs and high-traffic areas on a regular » Before turning off the machine, suction up clean
basis helps prolong carpet life.
water to thoroughly rinse out the interior of the flex
hose. Then, lift the cleaning tool and point it upwards
to drain any remaining water into the dirty water/
collection tank.
» Check upholstery stuffing before cleaning. Colored
stuffing may bleed through the fabric when it
becomes wet.
Tips
800.237.7691
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Product View
9
2
1
3
6
10
8
7
5
4
1
Clean Water/Solution Tank
Power Button
Dirty Water Tank
Flex Hose Clip
Flex Hose
Power Cord
7
8
Quick Release™ Cord Wrap
Second Tool Storage Location
(select models)
Tough Stain Brush™ Brush Block
Made of 100% Recycled Plastic
2
3
4
5
6
9
10 Hose Grip
cleaning fluid
Keep plenty of genuine bissell Cleaning
solution on hand so you can clean whenever
it fits your schedule. Always use genuine
bissell deep cleaning formulas. Non-bissell
cleaning solutions may harm the machine and
will void the warranty.
bissell 2X bissell 2X
Portable
Portable
Machine
Pet stain
& Odor
Machine
spot &
stain
Formula
Formula
WaRnInG
Use only BISSELL portable machine formula
WaRnInG
in your cleaner. Use of cleaning formulas
which contain lemon or pine oil may
damage this appliance and void the
warranty. Chemical spot cleaners or solvent-
based soil removers also should not be used.
These products may react with the plastic
materials used in your cleaner, causing
cracking or pitting.
To reduce the risk of fire and electric shock
due to internal component damage, use
only BISSELL cleaning fluids intended for use
with the deep cleaner.
Download from Www.Somanuals.com. All Manuals Search And Download.
800.237.7691
5
WaRnInG
Assebly
Do not plug in your vacuum cleaner until
you are familiar with all instructions and
operating procedures.
Assembling your portable machine is a
simple process.
1. slide the flex hose clip into the opening on
the front of the machine. You will hear a “snap”
when it is locked into place.
1.
2.
2. snap the hose grip bracket into the back of the
machine on the clean tank side. Wrap the flex hose
around the unit and snap hose grip into bracket.
3. Attach the cord wrap by snapping it into
place on the collection tank side of the machine.
Wrap the power cord around the cord wrap.
snap the second tool storage (select models)
into the back of the machine between the cord
wrap and hose grip bracket.
Operatios
Getting ready
1. To fill the clean water/solution tank
1a.
1e.
1b.
a. Remove the tank by lifting it straight up
and away from the unit.
b P. ull on the black tab to reveal tank opening.
The plug rotates out of the way for easy filling.
c. Your tank is marked for a large stain or a
small stain. based on your cleaning need, fill
with hot tap water to the water fill line. Add
bissell 2X formula to the formula fill line.
Do not boIl oR mIcRoWaVE WatER.
d. Replace the plug by rotating into place
and pressing gently onto tank.
e R. eplace the tank by lining up tank bottom
with indentations on machine. Press down
firmly on tank to secure in position.
3.
4.
2. Release the flex hose from the hose grip bracket.
Unwrap flex hose completely from around the unit.
3. select desired tool for spot cleaning. insert
tool on end of hose until it clicks into place.
4. Twist the Quick Release™ cord wrap clockwise
to unwrap the power cord completely.
pre-treating
Cleaning effectiveness will be enhanced if you
pre-treat heavily stained or highly soiled areas.
Here’s how to do it:
1. Hold the cleaning tool just above the surface
of the carpet or upholstery to be cleaned. When
using the Deep Reach Tool (select models),
keep the tool in contact with the carpet while
spraying. Press the trigger to release a spray of
cleaning solution directly onto the soiled area.
2. Wait 3-5 minutes before cleaning.
800.237.7691
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WaRnInG
Operatios
Keep spray away from face. Failure to do
so may result in personal injury.
cleaning with your spot cleaner
1. Plug the unit in and turn on by pressing button
under handle.
ImpoRtant
2. Hold the tool approximately 1” above the
soiled surface. When using the Deep Reach Tool
(select models), keep the tool in contact with the
carpet while spraying. Press the spray trigger to
apply the cleaning solution to the soiled area.
Check the manufacturer’s tag before
cleaning upholstery. “W” or “WS” on the tag
means you can use your SpotClean. If tag
is coded with an “S” (with diagonal strike-
through), or says “Dry Clean Only,” do not
proceed. If manufacturer’s tag is missing or
not coded, check with your furniture dealer.
3. Using the brush on the tool, gently scrub the
area to be cleaned.
4. For thorough cleaning, spray additional
solution while the brush and suction are in
contact with the surface.
5. Apply downward pressure on the tool and pull
it toward you. The suction will remove the dirt
and cleaning solution. Continue until no more
dirt can be removed.
6. As a final step, use “drying strokes” (by not
pressing the spray trigger) to remove as much
liquid/moisture as possible. Repeat this step as
often as necessary.
cleaning with the Stain trapper tool (select models)
Your deep cleaner may have come with a
stain Trapper tool. This tool is great for keeping
messes out of the machine’s hose system.
1. Attach the stain Trapper tool to the end
of the hose.
2. slowly move the tool back and forth over the
stain. be careful not to move the tool back and
forth too quickly or soiled water will flow back
into the hose.
3. To empty the stain Trapper tool, rotate
the small tank on the bottom of the tool
to unlock it.
3 .
notE: be careful to keep the top of the tool
facing upward or soiled water will spill out of
the tank, and into the hose.
4. Dump dirty water into a sink or toilet and
rinse the tank out with clean water. Replace the
tank by lining up the locking teeth with their
mating slots (make sure the two teeth that are
closest together are pointed toward the brush).
Turn the tank to lock it into place.
5.
5. Clean the front of the tool by removing the
plate over the suction path. Pull down on the
plate to remove. Run the tool and the plate
under clean water to rinse taking care to remove
all debris. Replace the front plate by sliding it
back into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
800.237.7691
7
Maintnace & Care
after cleaning
1. Unplug power cord from outlet.
WaRnInG
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
2. empty and rinse the dirty water tank after
each use, OR when dirty water reaches the
indicated maximum fill line.
a. To remove the dirty water collection tank,
simply lift up on the tank from the base of
the machine.
b. Pull tab to remove plug from tank
c. Rinse out dirty tank with clean water
after emptying.
d. Disconnect the cleaning tool from the
spray trigger by pushing down on button
lock and pulling straight off. (Do NOT twist
tool to remove it).
e. The front of the Tough stain Tool can
be removed for easy cleaning. Push the
button at the top of the tool and slide the
front of the tool off the base. Rinse both
under water and replace the front of the tool.
f. Check spray nozzle for accumulated dirt or
debris. if necessary, clean with soft bristle brush.
g. The float stack can be removed from the
dirty tank for cleaning. Turn it counter-clock-
wise to remove it. Rinse with water until all
debris is removed. Replace the float stack in
the dirty tank and turn clockwise to lock.
machine storage
1. Wipe all surfaces with a soft cloth.
2. Wrap power cord around the cord wrap on
the back of the machine.
3. Wrap flex hose around the base of the unit
and secure the spray trigger.
4. store unit in protected, dry area, at room
temperature (40° to 110°F).
thermal protector
An internal thermal protector has been designed
into your cleaner to protect it from overheating.
When the thermal protector activates, the suction
motor will stop operating. if this happens,
proceed as follows:
1. Turn the cleaner OFF (O) and unplug from
electrical outlet.
2. Check the end of the hose and tool for
blockages and remove if necessary.
3. Check the float stack for clogs. Refer to
cleaning instructions above.
4. When the motor cools for approximately 30
minutes, the thermal protector automatically
resets and cleaning may continue. if the thermal
protector continues to activate after following the
above steps, your cleaner may need servicing.
Call bissell Consumer Care or visit the website.
800.237.7691
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WaRnInG
Trobleshoting
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
problem
possible causes
Remedies
spray nozzle clogged
Clean spray nozzle using an unfolded
paper clip
Clean water/solution tank empty
Check/fill tank
Reduced
spray or
no spray
Clean water/solution tank insert
clogged
Clean insert at bottom of clean water/
solution tank
Pump needs priming
Gently lift clean water/solution tank
while depressing the spray trigger
OR gently squeeze clean tank while
depressing spray trigger
Poor upholstery/carpet
tool position
Reposition upholstery/carpet tool
on surface, follow recommended
cleaning procedures
Dirty water tank is full
empty dirty water tank
Spot cleaner
won’t pick
up cleaning
solution
Upholstery/carpet tool brush worn Replace with new brush
excess solution in flex hose
incorrect cleaning formula
lift tool and point upwards to allow
water in hose to flow into the dirty
water tank
Use bissell 2X Portable Machine
formulas only
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
please do
not return
Thank you for selecting a bissell product.
this product
t o t h e s t o r e .
for any questions or concerns, bISSEll is happy to
be of service. contact us directly at 1-800-237-7691.
Download from Www.Somanuals.com. All Manuals Search And Download.
800.237.7691
9
Accessories
These items are available for your BISSELL SpotClean portable deep cleaner.
ParT # ParT name
ParT # ParT name
160-0055
Tough Stain Brush Tool
160-0057
Stain Trapper Tool
203-7412
Deep Reach Pet Tool
203-7885
Spraying Crevice Tool
203- 6654
6” Stair Tool
203-6653
4” Upholstery Tool
cleaning formulas
79B9 2X Portable Machine Spot &
74R7
2X Portable Machine Pet Stain
& Odor 32oz
Stain Formula 32oz
800.237.7691
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warraty Service
This warranty gives you specific legal rights, and you may also
have other rights which may vary from state to state. If you need
additional instruction regarding this warranty or have questions
regarding what it may cover, please contact BISSELL Consumer Care
by E-mail, telephone, or regular mail as described below.
If your bISSEll product should
require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized
Service Center in your area.
If you need information about repairs or replacement parts,
or if you have questions about your warranty, contact BISSELL
Consumer Care.
limited two-year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon
receipt of the product BISSELL will repair or replace (with new or
remanufactured components or products), at BISSELL’s option, free of
charge from the date of purchase by the original purchaser, for two
years any defective or malfunctioning part.
Website or E-mail:
or call:
bissell Consumer Care
1-800-237-7691
Monday – Friday 8am - 10pm eT
saturday 9am - 8pm eT
sunday 10am - 7pm eT
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial
or rental service. This warranty does not apply to fans or routine
maintenance components such as filters, belts, or brushes. Damage or
malfunction caused by negligence, abuse, neglect, unauthorized repair,
or any other use not in accordance with the User's Guide is not covered.
or Write:
bissell Homecare, inc.
PO box 3606
Grand Rapids, Mi 49501
ATTN: Consumer Care
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S
LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages, so the above limitation or exclusion
may not apply to you.
*EXcEptIonS anD EXclUSIonS fRom
tHE tERmS of tHE lImItED WaRRanty
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER
WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES
WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE two YEAR DURATION FROM THE DATE
OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied
warranty last so the above limitation may not apply to you.
notE: please keep your original sales
receipt. It provides proof of date of
purchase in the event of a warranty claim.
Download from Www.Somanuals.com. All Manuals Search And Download.
800.237.7691
11
Regitr y r product today
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
bISSEll Rewards points
Automatically earn points for
discounts and free shipping on
future purchases.
product Support Reminders
and alerts
We’ll contact you with any
important product maintenance
reminders and alerts.
faster Service
supplying your information now
saves you time should you need to
contact us with questions regarding
your product.
Special promotions
Optional: Register your email
to receive notice of offers,
contests, cleaning tips and more!
BISSELL Cosumer Care
For information about repairs or replacement parts, or questions about your warranty:
call:
Write:
BISSELL Consumer Care
1-800-237-7691
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Care
Monday - Friday
saturday
sunday
8 am - 10 pm eT
9 am - 8 pm eT
10am - 7pm eT
When contacting bissell, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of purchase
date in the event of a warranty claim. See Warranty on page 15 for details.
We cant wait to har srom y y
Rate this product and let us (and millions
of your closest friends) know what you think!
www.bISSEll.com
©2012 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in Korea
Part Number 160-0131 Rev 11/12
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|