BOXLIGHT Projector CD 454m User Manual

Copyright © 2001 by BOXLIGHT  
Poulsbo, Washington. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity  
Manufacturer: BOXLIGHT  
19332 Powder Hill Place, Poulsbo, Washington, USA  
We declare under our sole responsibility that the CD-454m/455m/555m projec-  
tors conform to the following directives and norms:  
Directive 89/336/EEC, Amended by 93/68/EEC  
EMC: EN 55022  
EN 55024  
EN 61000-3-2  
EN 61000-3-3  
Directive 73/23/EEC, Amended by 93/68/EEC  
Safety: EN 60950: 1992 + A1 + A2 + A3 + A4: 1997  
April, 2001  
Trademarks  
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of  
Apple Computer, Inc. IBM and PS/2 are trademarks or registered trademarks of  
International Business Machines, Inc. Microsoft, PowerPoint, and Windows are  
trademarks or registered trademarks of Microsoft Corporation. Digital Light Pro-  
cessing is a trademark or registered trademark of Texas Instruments.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Safety Instructions  
Introduction  
Image Resolution  
Compatibility  
Usage Guidelines  
If You Need Assistance  
Warranty  
1
5
Setting up the Projector  
Connecting a Computer  
Using the Projector  
Basic Image Adjustment  
Using the Remote Control  
Adjusting the Projector  
Using the Keypad and Remote Buttons  
Display Menu  
Audio Menu  
Image Menu  
Controls Menu  
Language Menu  
18  
21  
Status Menu  
Maintenance & Troubleshooting  
Cleaning the Lens  
Replacing the Projection Lamp  
Replacing the Batteries in the Remote Control  
Using the Security Lock  
33  
33  
33  
36  
36  
37  
Troubleshooting  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
a
b
l
e
o
f
C
o
n
t
e
Appendix  
Specifications  
Accessories  
Portable and Laptop Activation Chart  
Using Video Mirroring with a PowerBook Computer  
Projected Image Size  
41  
42  
44  
49  
50  
Index  
51  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
Please read and follow all safety instructions provided BEFORE  
using your new projector. Failure to comply with safety instruc-  
tions may result in fire, electrical shock, or personal injury and  
may damage or impair protection provided by equipment. Please  
save all safety instructions.  
Safety Definitions:  
Warning: Statements identify conditions or practices that  
could result in personal injury.  
Caution:Statements identify conditions or practices that could  
result in damage to your equipment.  
Safety Symbols:  
Attention: For information about usage of a feature, please  
refer to the User’s Guide.  
Warning: Hot surface. Do not touch.  
An arrow pointing to the lamp door on the projector.  
Safety Terms:  
Warning: Don’t look directly into the lens when the lamp is  
turned on.  
Warning: To replace the lamp, turn off the projector  
and unplug the power cord. To avoid burns, wait 30 min-  
utes before opening the lamp door. Follow all instructions pro-  
vided in this User’s Guide.  
Warning: Please use the power cord provided. Connect  
the power cord to a receptacle with a protective safety  
(earth) ground terminal.  
Warning: Refer all service to qualified service personnel. Ser-  
vicing your own projector will void the warranty. See the fol-  
lowing page for the customer service contact information.  
Caution: Don’t block ventilation openings.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
S
a
f
e
t
y
I
n
s
t
r
u
c
t
i
o
n
s
Caution: Don’t set liquids on the projector. Spilled liquids may  
damage your projector.  
Caution: Don’t place the projector on a hot surface or in direct  
sunlight.  
Caution: Do not drop the projector. Transport the projector in a  
BOXLIGHT-approved case; see page 43 for a list of cases.  
Important Operating Considerations  
Do not place the projector on a tablecloth or other soft covering  
that may block the vents. In the unlikely event of the bulb ruptur-  
ing, thoroughly clean the area behind the projector and discard  
any edible items placed in that area.  
Do not place objects in  
this area behind the projector  
Customer Service  
If you need assistance, call BOXLIGHT at 1-800-762-5757 or  
360-779-7901.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
The BOXLIGHT® CD-454m™, CD-455m™ and CD-555m™ multi-  
media projectors are specifically designed for multipurpose use.  
They generate crisp, clear images using Digital Light Process-  
ing™ (DLP) technology. They are easy to connect, easy to use,  
easy to transport, and easy to maintain. The CD-454m and  
CD-455m have native SVGA 800x600 resolution, the CD-555m  
has XGA 1024x768 resolution. The user interfaces of the products  
are identical except where noted; information in this user’s guide  
applies to all products.  
Image Resolution  
NOTE: The CD-454m and  
CD-455m automatically expand  
640x480 images to 800x600. You  
can display these images at their  
native resolutions by turning off  
the Auto Resize feature. See  
“Resize” on page 24 for more  
information.  
CD-454m and CD-455m  
The SVGA resolution of the CD-454m/455m’s projected image is  
800x600. The projectors are compatible with screen resolutions up  
to 1024x768. If your computer’s screen resolution is higher than  
1024x768, reset it to a lower resolution before you connect the  
projector.  
CD-555m  
The XGA resolution of the CD-555m’s projected image is  
1024x768. The projector is compatible with screen resolutions up  
to 1024x768. If your computer’s screen resolution is higher than  
1024x768, reset it to a lower resolution before you connect the  
projector.  
NOTE: The CD-555m automati-  
cally expands 640x480 and  
800x600 images to 1024x768.  
You can display these images at  
their native resolutions by turning  
off the Auto Resize feature. See  
“Resize” on page 24 for more  
information.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
I
n
t
r
o
d
u
c
t
i
o
n
Compatibility  
The projector is compatible with a wide variety of computers and  
video devices, including:  
IBM-compatible computers, including laptops, up to 1024x768  
resolution.  
Apple® Macintosh® and PowerBook® computers up to  
1024x768 resolution.  
Most standard VCRs, DVD players, HDTV sources, camcord-  
ers and laser disc players.  
NOTE: The projector is  
compatible with 1080i and 720P  
HDTV formats.  
Unpacking the Projector  
The projector comes with the items shown in Figure 1. Check to  
make sure all are included. Contact BOXLIGHT immediately if  
anything is missing.  
If you are experienced in setting up presentation systems, use the  
Quick Start card that was included in the shipping box. For com-  
plete details on connecting and operating the projector, refer to  
this User’s Guide.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
2
1
3
4
5
7
9
6
8
FIGURE 1  
Shipping box contents  
1. Projector + lens cap  
2. Soft carry case  
6. Computer cable  
7. Audio cable adapter  
8. Audio cable  
3. Users Guide and quick start  
card  
4. Power cord  
9. Composite video cable  
5. Remote control  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
I
n
t
r
o
d
u
c
t
i
o
n
speaker  
keypad  
zoom ring  
Security  
lock  
connector panel  
power  
button  
focus ring  
power  
cord  
connector  
FIGURE 2  
Side view of projector  
Usage Guidelines  
Do not look directly into the projection lens when the lamp is  
turned on. The bright light may harm your eyes.  
Do not block the grills on the projector. Restricting the air flow  
can cause it to overheat and turn off. If this happens, you must  
wait a minute before attempting to turn it back on.  
Handle the projector as you would any product with glass  
components. Be especially careful not to drop it.  
Avoid leaving the projector in direct sunlight or extreme cold  
for extended periods of time. If this happens, allow it to reach  
room temperature before use.  
Transport the projector in a vendor-approved hard or soft case.  
Part numbers for these cases are listed on page 43.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If You Need Assistance  
The first place to look for help is in this manual. Be sure to check  
the guidelines in “Troubleshooting” on page 37.  
If this manual doesn’t answer your question, call BOXLIGHT at  
1-800-762-5757 or 360-779-7901.  
Warranty  
This product is backed by a limited two-year warranty. The  
details of the warranty are printed at the back of this manual.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
I
n
t
r
o
d
u
c
t
i
o
n
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING UP THE PROJECTOR  
1 Place the projector on a flat surface.  
The projector must be within 10 feet (3 m) of your power  
source and within 6 feet (1.8 m) of your computer.  
If you want to project from behind a translucent screen, set  
on page 28 to reverse the image.  
If you are installing the projector on the ceiling, refer to the  
installation guide that comes with the Ceiling Mount Kit for  
more information. To turn the image upside down, see  
“Ceiling Projection” on page 27. The Ceiling Mount Kit is  
sold separately, see “Optional Accessories” on page 43.  
2 Position the projector the desired distance from the screen.  
The distance from the lens of the projector to the screen and  
the zoom setting determine the size of the projected image.  
Figure 3 shows three projected image sizes. For more infor-  
mation about image size, see “Projected Image Size” on  
page 50.  
NOTE: The projector must be at  
least 5 feet (1.5 m) from the pro-  
jection screen.  
20 ft.  
12 ft.  
5 ft.  
1,5 m  
6,1 m  
3,66 m  
FIGURE 3  
Projected image size at minimum zoom  
3 Make sure the projector and the computer are turned off.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
NOTE: Before you continue,  
make sure the projector and all  
other equipment is turned off. If  
youre connecting a computer,  
in  
in  
make sure the distance between it  
and the projector is 6 feet or less.  
composite  
video  
S-video  
Audio in  
M1  
data interface  
CablePro  
data interface  
FIGURE 4  
Connector panel  
NOTE: The CablePro connector is  
used with the optional CablePro, a  
connection hub containing mouse,  
audio, monitor and computer  
connectors. It is optimized for  
ceiling -mounted installations. See  
“Optional Accessories” on  
to computer video  
to USB mouse  
to projector  
to computer  
FIGURE 5  
Computer cable  
page 43.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting a Computer  
The projector ships with an analog computer cable. If your com-  
puter has a digital output, you can order the optional digital com-  
puter cable for use with the CD-455m and CD-555m only.  
1 Plug the end of the computer cable with one cable into the  
connector on the projector.  
2 Plug the blue end of the computer cable into the video connec-  
tor on your computer.  
NOTE: Many laptop computers  
do not automatically turn on their  
external video port when a sec-  
ondary display device such as a  
projector is connected. Refer to  
your computer manual for the  
command that activates the exter-  
nal video port. Activation com-  
mands for some laptop computers  
are listed in the Appendix of this  
manual on page 44 and in the  
Technical Support section of our  
website.  
in  
in  
audio cable  
USB mouse  
computer cable  
FIGURE 6  
Connecting the projector to a computer  
NOTE: If you are connecting an  
older Macintosh computer that  
does not have a 15-pin connector,  
you must use a Mac adaptor  
between the computer and the  
projector. See “Optional Accesso-  
ries” on page 43.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Do you want to control the computers mouse from the projector’s  
remote or keypad?  
1 Plug the USB cable into the USB mouse connector on your  
computer. If your computer has a PS/2 mouse connector and  
not a USB mouse connector, you can purchase the optional  
CablePro III which has a PS/2 mouse connector or the Execu-  
tive Remote IR Receiver. See “Optional Accessories” on  
page 43.  
NOTE: The USB mouse is  
supported for use with  
Windows 98, Windows 2000, and  
Apple OS 8.5 and higher only.  
Do you want to play your computers audio on the projector?  
2 Plug the other end of the audio cable into the  
connector  
on the projector.  
NOTE: You do not need to restart  
your computer after connecting a  
USB mouse to use it (it is hot-  
pluggable).  
Now you’re ready to power up the projector and your laptop.  
Skip to “Powering up the Projector and Adjusting the Image” on  
page 13.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting a Video Player  
1 If your video player uses a round, one-prong composite video  
and composite video cable that shipped with the projector.  
If your video player uses a round, four-prong S-video con-  
nector, you’ll need an S-video cable in addition to the audio  
cable and audio adapter. The S-video cable is sold sepa-  
rately. (See “Optional Accessories” on page 43.)  
NOTE: HDTV sources must be  
connected to the projector using  
the computer cable (not a com-  
posite or S-video cable). See the  
previous pages for details on con-  
necting this cable.  
2 Plug the composite video cable’s yellow connector into the  
“video-out” connector on your video player (Figure 7). This  
connector may be labeled “To Monitor.”  
If you’re using an S-video cable, connect it to the “S-video  
out” connector on the video player (Figure 8).  
3 Plug the other yellow connector into the composite video con-  
nector  
If you’re using S-video, plug the other end of the cable into  
the “S-video” connector on the projector (Figure 8).  
on the projector.  
in  
in  
audio  
adapter  
composite video  
cable  
audio cable  
FIGURE 7  
Connecting the projector to a video player using the standard video cable (with com-  
posite video connector) and the audio cable and adapter  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
in  
in  
audio  
adapter  
S-video  
cable  
audio cable  
FIGURE 8  
Connecting the projector to a video player using an S-video cable and the audio cable  
and adapter  
4 Plug the audio adapter’s white connector into the left “audio  
out” connector on your video player. Plug the adapters red  
connector into the right “audio out” connector on the video  
player (Figure 7 and Figure 8).  
NOTE: The audio adapter is  
provided so that the same audio  
cable used to connect a computer  
can be used with the adapter to  
connect a video player.  
5 Plug the audio adapter’s other end into the audio cable.  
6 Plug the audio cable into the “audio in”  
connector on the  
projector.  
The projector is compatible with these major broadcast video  
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and  
SECAM. It automatically adjusts to optimize its performance for  
the incoming video.  
CAUTION: Your video player  
may also have a “Video Out”  
connector for a coaxial cable  
connection. DO NOT use this to  
connect to the projector.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Powering up the Projector and Adjusting the Image  
1 Remove the lens cap.  
NOTE: Always use the power cord  
2 Plug the power cord into the side of the projector, then plug it  
into your electrical outlet. A surge-protected power strip is  
recommended.  
that shipped with the projector.  
3 Press the Power button on the side of the projector.  
The fans start to run, the LED on the top of the projector  
(Figure 12 on page 18) lights green, and the startup screen  
appears. It takes about one minute for the image to achieve  
full brightness.  
NOTE: The first time you connect  
your computer to the projector, the  
computer may display a message  
stating that new hardware was  
found. The Add New Hardware  
Wizard may appear. Use the Wiz-  
ard to load the correct driver (the  
computer considers the projector a  
Plug and Play Monitor).  
4 If you connected a video player, turn it on.  
The video image should display on the projection screen. If  
it doesn’t, press the source button on the keypad (page 18)  
or the video button on the remote to display your video  
image. You can select a default source to determine which  
source the projector examines first during power-up for  
active video; see “Default Source” on page 28.  
Use the volume buttons to adjust the volume.  
5 Turn on your computer.  
The computer image should display on the projection  
screen. If it doesn’t, press the source button on the keypad  
or the computer button on the remote to display your com-  
puter’s image. Make sure your laptop’s external video port  
is activated; see “Portable and Laptop Activation Chart” on  
page 44 for details.  
NOTE: With some computers,  
the order in which you power up  
the equipment is very important.  
Most computers should be turned  
on last, after all other peripherals  
have been turned on. Refer to your  
computer’s documentation to  
determine the correct order.  
If necessary, make adjustments to the image using the pro-  
jector’s on-screen menus. To open the menus, press the  
menu button on the keypad or remote, then select the Dis-  
play or Image menu. For more information about the  
menus, see page 20.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Turning Off the Projector  
If you want to turn off the projector for a short period of time,  
press the standby button on the keypad or remote. This blanks the  
screen for fifteen minutes, but keeps the projector running. (You  
can change the amount of time the projector stays in standby  
mode; see “Standby Time” on page 27 for details.) After 15 min-  
utes, the lamp goes out (the projector keeps running). To exit  
standby mode, press the standby button again. (It may take sev-  
eral seconds for the projection lamp to reach full power and  
project the image again.)  
To completely power off the projector, press the Power button. If  
you want to turn the lamp back on immediately, you must allow  
about a minute for the lamp to cool. The lamp won’t light if it’s  
too hot.  
NOTE: To maximize lamp life,  
allow the projector to run for at  
least five minutes before turning  
it off.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
USING THE PROJECTOR  
This section describes how to use and make adjustments to the  
projector. It also provides a reference to the keypad and remote  
buttons and the options available from the on-screen menus.  
Basic Image Adjustment  
1 Make sure you have powered up your equipment in the right  
order (page 13).  
2 If the image doesn’t display completely, zoom the image  
(page 17), adjust the height of the projector (page 17) or center  
the image by adjusting its horizontal or vertical position  
(page 26). Be sure the projector lens is at a 90 degree angle to  
the screen.  
3 If the image is out of focus, rotate the focus lens (page 17).  
4 If the image appears to shimmer or if it has blurry vertical  
bars after you have adjusted the focus, turn Auto Image  
(page 24) off and then back on to reset the automatic sync and  
tracking. If that doesn’t clear up the image, turn Auto Image  
off and adjust the sync (page 25) and/or the tracking  
(page 25) manually.  
5 If the colors don’t look right, adjust the brightness (page 21).  
Using the Remote Control  
To control the computers mouse from the projector’s remote or  
keypad, you must connect the USB mouse connector on the com-  
puter cable to the computer. See page 10 for details.  
The projector ships with a remote that has four function buttons,  
a disk mouse and two mouse buttons, one on the top of the  
remote and one on the bottom.  
Point the remote control at the projection screen or at the front of  
the projector (not at the computer). The range for optimum oper-  
ation is about 25 feet. If you point the remote at the projection  
screen, the distance to the screen and back to the projector must  
be less than or equal to 25 feet. For best results, point the remote  
directly at the projector.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
disk mouse  
right mouse button  
left mouse button  
(on underside of remote)  
FIGURE 9  
Remote control  
on the screen. You can move the cursor at any angle by pressing  
the corresponding edge of the disk. The mouse button on the top  
of the remote simulates your computer’s right mouse button; the  
button on the bottom simulates your computers left mouse but-  
ton. See “Using the Keypad and Remote Buttons” starting on  
page 18 for a description of the four function buttons.  
NOTE: If the remote is inactive  
for several minutes, it “sleeps” to  
conserve battery life. Press any  
button except the disk mouse to  
re-activate the remote.  
If you are creating presentations in Microsoft® PowerPoint®, you  
can use the remote’s mouse buttons to navigate through your  
presentation while in Slide Show mode. To configure PowerPoint  
for this, choose Options from the Tools menu, click the View Tab,  
de-select the “Popup Menu on Right Mouse Click” option in the  
Slide Show section, then click OK. Then, when you’re in Power-  
Point’s Slide Show mode, a left click advances to the next slide  
and a right click returns to the previous slide (other PowerPoint  
modes are not affected).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting the Projector  
To focus the image, rotate the focus ring (Figure 10) until the  
image is clear. To zoom the image, rotate the zoom ring. This  
adjusts the image size without affecting focus.  
zoom ring  
focus ring  
FIGURE 10  
Focus ring and zoom ring  
The projector is equipped with a self-locking, quick-release eleva-  
tor foot and button and a leveling knob (Figure 11).  
To raise the projector:  
1 Press and hold the elevator button (Figure 11).  
2 Raise the projector to the height you want, then release the  
button to lock the elevator foot into position. If necessary, turn  
the leveling knob at the rear of the projector to adjust the  
angle of the projected image.  
leveling  
knob  
elevator foot  
elevator button  
(under finger)  
FIGURE 11  
Adjusting the height of the projector  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Using the Keypad and Remote Buttons  
While the menus are displayed, the volume, source, and standby  
buttons on the keypad act as menu navigation buttons. See  
“Using the On-Screen Menus” on page 20 for details.  
LED  
menu  
source  
volume -  
volume +  
standby  
right mouse  
left mouse  
button  
button  
FIGURE 12  
Keypad and remote buttons  
Menu  
Press the menu button to open the on-screen menus. Press menu  
tor saves any changes you made. For more information about the  
on-screen menus, see page 20.  
Mouse buttons  
Use the mouse buttons to adjust settings in the menus. See  
“Using the On-Screen Menus” on page 20.  
Source (keypad only)  
or Computer and Video (remote only)  
When you have more than one source (computer and video) con-  
nected to the projector, select between them by pressing the  
source button on the keypad or the computer or video button on  
the remote.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Standby  
When you press standby, the display and audio turn off and a  
blank screen is displayed for 15 minutes. You can change the  
amount of time the projector stays in standby mode; see  
“Standby Time” on page 27 for details. The LED lights orange  
while the projector is in standby.  
If you press standby again within 15 minutes, the projector  
returns to normal operations immediately. The LED changes  
from orange to green.  
If you press standby again after 15 minutes, there is about a  
60 second delay before the lamp turns back on. The LED  
flashes green while the lamp is re-lighting.  
If you don’t press standby again, the lamp turns off after 15  
minutes. The LED lights orange while the projector is in  
standby.  
Volume (keypad only)  
To increase the volume, press volume +  
ume, press volume -  
. To decrease the vol-  
.
Volume adjustments are saved for each source you have con-  
nected.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Using the On-Screen Menus  
The projector has six drop-down menus that allow you to make  
image adjustments and change a variety of settings. Most of these  
adjustments aren’t available directly from the keypad.  
To open the on-screen menus, press the menu button on the  
keypad or remote. This changes the volume, source, and standby  
buttons on the keypad to menu navigation buttons. Press the  
corresponding buttons to move the cursor up, down, left, or  
right, or use the disk mouse on the remote. To select a menu,  
move the cursor left or right to highlight the menu you want. The  
drop-down menu appears.  
NOTE: Some menu items may be  
grayed out (dimmed) at certain  
times. This indicates the item is  
not applicable to your setup (for  
example, video standards do not  
apply to computer sources) or the  
item is not enabled until another  
selection is made (for example,  
Manual Tracking is not available  
until Auto Image is turned off).  
>
>
Display Audio Image Controls Language Status  
Brightness  
Contrast  
Tint  
menu  
Color  
source  
Sharpness  
Blank screen  
Reset all  
blue  
volume -  
volume +  
use these four buttons to navigate  
through the menus  
standby  
FIGURE 13  
Keypad navigation buttons and drop-down menu  
To change a menu setting, use the up and down navigation but-  
tons on the keypad or the disk mouse on the remote to move the  
cursor up and down to the item you want to change (the selected  
item is highlighted), then use the left and right mouse buttons to  
adjust a setting. Some submenus, such as Brightness, consist of a  
slider bar you use to increase or decrease a value; some sub-  
menus, such as Standby Time, consist of options you scroll  
through to select the desired one. All changes are saved when  
you close the menus.  
To access another menu, use the left and right navigation buttons  
to move to the desired menu.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Display Menu  
>
>
Display Audio Image Controls Language Status  
Brightness  
Contrast  
Tint  
Color  
Sharpness  
Blank screen  
Reset all  
blue  
FIGURE 14  
Display menu  
Brightness  
Adjusting the brightness changes the intensity of the image.  
Press the left mouse button to darken the image.  
Press the right mouse button to lighten the image.  
Contrast  
The contrast controls the degree of difference between the lightest  
and darkest parts of the picture. Adjusting the contrast changes  
the amount of black and white in the image.  
Press the left mouse button to decrease the contrast.  
Press the right mouse button to increase the contrast, making  
the blacks appear blacker and the whites appear whiter.  
Tint  
The tint adjusts the red-green color balance in the projected  
image.  
Press the left mouse button to increase the amount of green in  
the image.  
Press the right mouse button to increase the amount of red in  
the image.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Color  
The color setting adjusts a video image from black and white to  
fully saturated color.  
Press the left mouse button to decrease the amount of color in  
the image.  
Press the right mouse button to increase the amount of color in  
the image.  
Sharpness  
This setting adjusts the sharpness of a video image and is avail-  
able on the CD-455m and CD-555m only.  
Press the left mouse button to decrease the sharpness.  
Press the right mouse button to increase the sharpness.  
Blank Screen  
Blank Screen determines what color is displayed when there is no  
active source and when the projector is in standby. Click the left  
or right mouse button to toggle between blue and black.  
Reset All  
Click the left or right mouse button to reset all the options (except  
Language, Video Standard, Rear and Ceiling Projection, Plug and  
Play, and Standby Time) in all the menus to their original settings.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Audio Menu  
>
>
Display Audio Image Controls Language Status  
Volume  
Tr e b l e  
Bass  
FIGURE 15  
Audio menu  
Volume  
Press the left mouse button to decrease the volume.  
NOTE: Changing the volume  
using the menu is the same as  
changing it using the keypad.  
Press the right mouse button to increase the volume.  
Volume adjustments you make are saved for each source.  
Treble  
The treble setting controls the high frequencies of your audio  
source.  
Press the left mouse button to decrease the treble.  
Press the right mouse button to increase the treble.  
Treble adjustments you make are saved for each source.  
Bass  
The bass setting controls the low frequencies of your audio  
source.  
Press the left mouse button to decrease the bass.  
Press the right mouse button to increase the bass.  
Bass adjustments you make are saved for each source.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Image Menu  
>
>
Display Audio Image Controls Language Status  
Keystone  
Overscan  
on  
on  
on  
Auto image  
Resize  
Manual sync  
Manual tracking  
Horizontal position  
Vertical position  
FIGURE 16  
Image menu  
Keystone  
This option helps to keep the image square as the angle of projec-  
tion is changed. To adjust the keystone, highlight Keystone, then  
click the left or right mouse button. This option is available for  
computer sources displaying their native resolutions only, SVGA  
800x600 for the CD-454m/455m and XGA 1024x768 for the  
CD-555m.  
Overscan  
This option crops all the edges of the image to remove noise gen-  
erated on the edges by your source. This option is available for  
video sources only.  
NOTE: Some screen savers  
interfere with the operation of  
Auto Image. If youre experiencing  
problems, try turning your screen  
saver off, then turning Auto Image  
off and back on.  
Auto Image  
The projector automatically adjusts tracking, signal synchroniza-  
tion and vertical and horizontal position for most analog comput-  
ers (Auto Image does not apply to video sources or digital  
computer sources). If you want to adjust these features manually,  
you must turn off Auto Image first by highlighting Auto Image in  
the Image menu and clicking the left or right mouse button to  
select “off”.  
Resize  
This option works differently for computer and video sources.  
For computer sources, Resize automatically resizes the image by  
scaling it up or down. It only affects computer images that are not  
the projector’s native resolution. When Resize is on, the projector  
makes the best fit of the image to the computer screen. If you turn  
Resize off (by highlighting it in the Image menu and clicking the  
left or right mouse button to select “off”), the image may be either  
cropped or too small for the screen.  
NOTE: When you connect an  
HDTV source, the projector  
automatically displays the image in  
16x9 format.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
For video sources, Resize allows you to select from among four  
different re-sizing options. The default is Standard, which resizes  
the image from its original version to fit a standard 4x3 aspect  
ratio screen. Widescreen Letterbox preserves the 16x9 aspect ratio  
of the original theater version, but the image is placed in a 4x3  
space, so black bars appear at the top and bottom of the image.  
Enhanced Widescreen also preserves the aspect ratio of the origi-  
nal theater version and is designed to be used with content that is  
Enhanced for Widescreen TVs. This option yields more detail  
than Widescreen Letterbox. Native reduces the Standard size to  
match the height of Enhanced Widescreen.  
Manual Sync  
The projector adjusts signal synchronization automatically for  
most computers. But if the projected computer image looks fuzzy  
or streaked, try turning Auto Image off then back on again. If the  
image still looks bad, try adjusting the signal synchronization  
manually:  
1 Turn Auto Image off.  
2 Highlight Manual sync, then press the left or right mouse but-  
ton repeatedly until the image is sharp and free of streaks.  
Manual Tracking  
The projector adjusts tracking automatically to match the video  
signal from your computer. However, if the display shows evenly  
spaced, fuzzy, vertical lines or if the projected image is too wide  
or too narrow for the screen, try turning Auto Image off then back  
on again. If the image is still bad, try adjusting the tracking man-  
ually:  
1 Turn Auto Image off.  
NOTE: The Manual Sync,  
2 Highlight Manual tracking, then press the left or right mouse  
button repeatedly until the fuzzy vertical bars are gone.  
Manual Tracking, Horiz. Posi-  
tion and Vert. Position options  
are available only for analog com-  
puter sources. The projector sets  
these options automatically for dig-  
ital computer and video sources.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Horizontal position  
Follow these steps to manually adjust the horizontal position:  
1 Turn Auto Image off.  
2 Highlight Horizontal position, then press the left mouse but-  
ton to move the image right or press the right mouse button to  
move the image left.  
Positioning adjustments are saved when you power off the pro-  
jector.  
Vertical position  
Follow these steps to manually adjust the vertical position.  
1 Turn Auto Image off.  
2 Highlight Vertical position, then press the left mouse button to  
move the image down or press the right mouse button to  
move the image up.  
Positioning adjustments are saved when you power off the pro-  
jector.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Controls Menu  
>
>
Display Audio Image Controls Language Status  
Video standard  
Standby time  
1 minute  
Ceiling projection  
Rear projection  
Default source  
Auto source select  
Plug and Play  
off  
off  
computer 1 analog  
off  
off  
on  
Display messages  
Display startup screen on  
FIGURE 17  
Controls menu  
Video Standard  
When Video standard is set to Auto, the projector attempts to  
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,  
PAL-60, or SECAM) automatically based on the input signal it  
receives. (The video standard options may vary depending on  
your region of the world.) If the projector is unable to detect the  
correct standard, the colors might not look right or the image  
might appear “torn.” If this happens, manually select a standard  
by clicking the left or right mouse button and cycling through the  
standards.  
NOTE: If you already know the  
video standard used in your geo-  
graphical area, it’s often best to  
manually select it.  
Standby Time  
This option lets you select how long the lamp stays on and the  
blank screen is displayed when the projector enters standby  
mode before the projector turns off. Select among instant, 1, 5, 10,  
15 and 30 minutes and 1 and 2 hours by clicking the left or right  
mouse button and cycling through the options.  
Ceiling Projection  
When you turn Ceiling Projection on, the projector turns the  
image upside down for ceiling-mounted projection. Highlight  
Ceiling Projection, then click the left or right mouse button to  
turn this feature on and off.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Rear Projection  
When you turn Rear Projection on, the projector reverses the  
image so you can project from behind a translucent screen. High-  
light Rear Projection, then click the left or right mouse button to  
turn this feature on and off.  
Default Source  
Default Source toggles among Computer 1 analog, Computer 1  
digital, Computer 2, and Video. This determines which source the  
projector checks first for active video during power-up. Highlight  
Default Source and click the left or right mouse button to toggle  
among the options.  
Auto Source Select  
This setting toggles between On and Off. When this feature is Off,  
the projector defaults to the source selected in Default Source. To  
display another source, you must manually select one by press-  
ing the source button on the keypad or the computer or video but-  
ton on the remote. When this feature is On, the projector  
automatically finds the active source, checking the default source  
first. Highlight Auto Source Select and click the left or right  
mouse button to turn this feature on and off.  
Plug and Play  
This setting toggles between On and Off. When it is On, most  
new computers will automatically recognize the projector, then  
set the monitor resolution and refresh rate accordingly. You need  
to set the Plug and Play setting to Off for the projector to display  
properly on some older computers. The Plug and Play setting  
does not affect video images.  
If the projectors display constantly changes between the com-  
puter image and the message, “Perfecting the image”, you may  
need to turn Plug and Play Off.  
Display Messages  
This setting toggles between On and Off. When this feature is On,  
status messages such as “No signal detected” or “Standby  
Active” appear in the lower-right corner of the screen. Click the  
left or right mouse button to turn this feature off and not see sta-  
tus messages.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Display Startup Screen  
This setting toggles between On and Off. When this feature is On,  
the startup screen appears when the projector starts up and  
remains until an active source is detected. The startup screen con-  
tains information on contacting BOXLIGHT. Click the left or right  
mouse button to turn this feature off and display a plain black or  
blue screen instead of the startup screen.  
Language Menu  
>
>
Display Audio Image Controls Language Status  
English  
Francais  
Deutsch  
~
Espanol  
FIGURE 18  
Language menu  
You can display the on-screen menus in English, French, German,  
Spanish, Chinese or Japanese.  
Move the cursor to the language you want, then click the left or  
right mouse button. The menus redraw immediately.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Status Menu  
This is a read-only window for informational purposes. To dis-  
play the status window, select Show status from the menu, then  
click the left or right mouse button. To remove the window, click  
the left or right mouse button.  
Display Audio Image Controls Language Status  
>
Show status  
Lamp hours used  
Computer resolution  
Horizontal refresh rate  
Vertical refresh rate  
Mute status  
0039  
1024x768  
60.03 KHz  
75.04 Hz  
off  
Source  
computer 1 analog  
Software version  
Startup screen version  
Boot version  
1.0  
1.0  
1.0  
1.0  
CablePro version  
FIGURE 19  
Status menu  
Lamp hours used  
Indicates how many hours the current lamp has been in use. The  
counter starts at zero hours and counts each hour the lamp is in  
use. After 2,000 hours of use, the message “Change Lamp” tem-  
porarily appears on the screen when the projector is turned on.  
Change the lamp within the next 50 hours. After 2,050 hours, the  
LED flashes orange and the lamp will not light. See “Replacing  
the Projection Lamp” on page 33 for details.  
Computer resolution  
Shows your computers resolution setting. To change this, go to  
your computer’s Control Panel and adjust the resolution in the  
Display tab. See your computer’s user’s guide for details.  
Horizontal refresh rate  
The time period that one horizontal line is displayed.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Vertical refresh rate  
The time period that one video frame is displayed.  
Mute status  
Indicates if the audio is muted.  
Source  
Indicates the active source, Computer 1 analog, Computer 1 digi-  
tal, Computer 2, and Video.  
Software version  
Indicates the projectors software version. This information is  
useful when contacting Technical Support.  
Startup screen version  
Indicates the projectors startup screen version. This information  
is useful when contacting Technical Support.  
Boot version  
Indicates the projectors boot software version. This information  
is useful when contacting Technical Support.  
CablePro version  
Indicates the CablePro’s software version. This information is  
useful when contacting Technical Support.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE & TROUBLESHOOTING  
This section describes how to:  
clean the lens  
replace the projection lamp  
replace the batteries in the remote  
use the security lock feature  
troubleshoot the projector  
Cleaning the Lens  
Follow these steps to clean the projection lens:  
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.  
Avoid using an excessive amount of cleaner, and don’t  
apply the cleaner directly to the lens.  
Abrasive cleaners, solvents or other harsh chemicals might  
scratch the lens.  
2 Lightly wipe the cleaning cloth over the lens in a circular  
motion.  
3 If you don’t intend to use the projector immediately, replace  
the lens cap.  
Replacing the Projection Lamp  
The lamp hour counter in the Status menu counts the number of  
hours the lamp has been in use. After 2,000 hours of use, the mes-  
sage “Change Lamp” temporarily appears on the screen when  
the projector is turned on. Change the lamp within the next 50  
hours. After 2,050 hours, the LED flashes orange and the lamp  
will not light. You can order new lamp modules from BOXLIGHT.  
See “Accessories” on page 42 for information.  
WARNING: To avoid burns,  
allow the projector to cool for at  
least 30 minutes before you open  
the lamp module door. Never  
extract the lamp module while the  
projector is operating.  
Follow these steps to replace the projection lamp:  
1 Turn off the projector and unplug the power cord.  
2 Wait 30 minutes to allow the projector to cool thoroughly.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
M
a
i
n
t
e
n
a
n
c
e
&
T
r
o
u
s
h
o
o
t
i
n
g
3 Invert the projector on a soft flat surface, then insert a small  
screwdriver or other flat object into the tabs on the lamp mod-  
ule door (Figure 20) and gently pry the door up.  
WARNING: Be extremely careful  
when removing the lamp module.  
In the unlikely event that the bulb  
ruptures, small glass fragments  
may be generated. The lamp  
module is designed to contain  
these fragments, but use caution  
when removing the lamp module.  
FIGURE 20  
Removing the lamp door  
4 Pull the lamp door up and remove it.  
CAUTION: Never operate the  
projector with the lamp door open  
or removed. This disrupts the air  
flow and causes the projector to  
overheat.  
5 Loosen the two non-removable screws on the outside of the  
module (Figure 21).  
FIGURE 21  
Loosening the screws on the lamp module  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
6 Lift and grasp the pull tab and lift the module out (Figure 22).  
Dispose of the lamp module in an environmentally proper  
manner.  
pull tab  
FIGURE 22  
Removing the lamp module  
7 Install the new lamp module, being sure to align the connec-  
tors properly.  
WARNING: Do not drop the  
lamp module or touch the glass  
bulb! The glass may shatter and  
cause injury.  
8 Push the module in until it is flush with the bottom case of the  
projector.  
9 Tighten the screws on the outside of the module.  
10 Replace the lamp door by inserting the hooks on the lamp  
door into the slots on the projector and pressing the lamp door  
into place. If the lamp door does not fit properly or bulges out,  
remove the door and re-seat the lamp module.  
11 Plug in the power cord and press the Power button to turn the  
projector back on.  
12 To reset the lamp hour counter in the Status window, press  
and hold the volume - button, then press the menu button  
(while still holding down the volume - button) for 5 seconds.  
Verify that the counter was reset by pressing the menu button  
and viewing the counter in the Status window.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
M
a
i
n
t
e
n
a
n
c
e
&
T
r
o
u
b
l
e
s
h
o
o
t
i
n
g
Replacing the Batteries in the Remote Control  
The life of the batteries depends on how often and how long you  
use the remote. Symptoms of low battery charge include erratic  
responses when using the remote and a reduced range of opera-  
tion.  
Follow these steps to replace the batteries:  
1 Turn the remote face down in your hand.  
2 Slide the battery cover off the end of the remote.  
3 Remove the old batteries and dispose of them in an environ-  
mentally proper manner.  
4 Install two new AAA alkaline batteries. Make sure you install  
each in the correct direction.  
5 Slide the battery cover back on the remote.  
Using the Security Lock  
The projector has a security connector for use with a PC Guardian  
Cable Lock System (Figure 23). See “Optional Accessories” on  
page 43 for ordering information. Refer to the information that  
came with the lock for instructions on how to use it to secure the  
projector.  
FIGURE 23  
Installing the security lock  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Troubleshooting  
Problem: The projector is not running  
Make sure that the power cord is properly connected to a fully  
functional AC electrical outlet. Make sure that the power cord  
is also properly connected to the projector.  
If the projector is plugged into a power strip, make sure the  
power strip is turned on.  
Make sure the projector is turned on.  
Problem: Projector is running, but nothing appears on projec-  
tion screen  
Make sure you have removed the lens cap on the projection  
lens at the front of the projector.  
Make sure the lamp has not been in use for over 2,050 hours.  
blinks orange. See “Replacing the Projection Lamp” on  
page 33.  
Check the projector’s lamp to ensure that it is securely con-  
nected in the lamp module. Make sure the lamp door is  
installed. See “Replacing the Projection Lamp” on page 33.  
Verify that the cables are connected correctly. See page 9  
through page 12 for connection procedures.  
Make sure that the cables do not have any bent pins.  
Verify that the proper input source is connected. See “Source  
(keypad only) or Computer and Video (remote only)” on  
page 18.  
You might need to turn everything off and power up the  
equipment again in the proper order. Refer to your com-  
puter’s documentation to determine the correct order.  
Make sure your laptop’s external video port is turned on. See  
the “Portable and Laptop Activation Chart” on page 44 or  
your computer’s manual for details.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
M
a
i
n
t
e
n
a
n
c
e
&
T
r
o
u
b
l
e
s
h
o
o
t
i
n
g
Make sure your computer’s video board is installed and con-  
figured correctly.  
Make sure your computer has a compatible video board. The  
projector isn’t CGA, EGA or SXGA compatible.  
If you’re using Windows 98:  
1 Open “My Computer” icon, the Control Panel folder and  
then the Display icon.  
2 Click the Settings tab.  
3 Verify that the Desktop area is set to 1024x768 or less.  
Problem: Color or text not being projected  
You might need to adjust the brightness up or down until the  
text is visible. Refer to “Brightness” on page 21 for more infor-  
mation.  
Problem: The screen resolution is not right  
Make sure the computer’s video card is set for a resolution of  
Problem: Image isn’t centered on the screen  
Move the projector to reposition the image.  
Reposition the image using the menu. Refer to “Horizontal  
position” on page 26 and “Vertical position” on page 26.  
Be sure the projector lens is at a 90 degree angle to the screen.  
Problem: Image is too wide or narrow for screen  
Adjust the zoom or projector placement.  
Adjust the resolution of your video card if it’s greater than  
1024x768.  
Problem: Image is out of focus  
Turn the projection lens to focus the image.  
Make sure the projection screen is at least 5 feet (1.5 m) from  
the projector.  
Check the projection lens to see if it needs cleaning.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Problem: Image and menus are reversed left to right  
Rear projection mode is probably turned on. Turn Rear Projec-  
tion off in the Controls menu. The image should immediately  
return to forward projection. See “Rear Projection” on  
page 28.  
Problem: the projector displays vertical lines, “bleeding” or  
spots  
Adjust the brightness. See “Brightness” on page 21.  
Check the projection lens to see if it needs cleaning.  
Problem: no sound  
Adjust volume.  
Verify audio/input connections.  
Adjust audio source.  
Problem: Image is “noisy” or streaked  
Try these steps in this order.  
2 Turn Auto Image off and then back on again. See “Auto  
Image” on page 24.  
3 Turn Auto Image off and adjust the synchronization and track-  
ing manually to find an optimal setting. See “Manual Sync”  
on page 25 and “Manual Tracking” on page 25.  
The problem could be with your computers video card. If  
possible, connect a different computer.  
Problem: Projected colors don’t match the computer or video  
player’s colors  
Just as there are differences in the displays of different moni-  
tors, there are often differences between the computer image  
and the projected image. Adjust the brightness, tint and/or  
contrast from the Display menu. See “Brightness” on page 21,  
“Tint” on page 21 and “Contrast” on page 21.  
Problem: Lamp seems to be getting dimmer  
The lamp begins to lose brightness when it has been in use for  
a long time. Replace the lamp as described in “Replacing the  
Projection Lamp” on page 33.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
M
a
i
n
t
e
n
a
n
c
e
&
T
r
o
u
b
l
e
s
h
o
o
t
i
n
g
Problem: Lamp shuts off  
the projector, wait at least a minute, then plug it back in.  
Make sure the vents are not blocked.  
Make sure the lamp has not been in use for over 2,050 hours.  
The lamp automatically shuts off at 2,050 hours. See “Replac-  
ing the Projection Lamp” on page 33.  
Before calling BOXLIGHT for assistance, please have the following  
information available:  
the projectors serial number (located on the bottom label)  
the resolution of your computer.  
Call BOXLIGHT at 1-800-762-5757 or 360-779-7901.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
APPENDIX  
Specifications  
The projector must be operated and stored within the tempera-  
ture and humidity ranges specified.  
Te m p e r a t u re  
Operating  
50 to 104° F (10 to 40° C) at sea level  
50 to 95° F (10 to 35° C) at 10,000 feet  
Non-operating  
-4 to 158° F (-20 to 70° C)  
Humidity  
Operating and non-oper.  
10% to 95% relative humidity, non-condensing  
Dimensions  
3.9 x 10.9 x 11.2 inches (9.9 x 27.7 x 28.6 cm)  
Weight  
6.7 lbs. (3 kg) unpacked  
Altitude  
Operating  
0 to 10,000 feet (3,048 meters)  
Non-operating  
0 to 20,000 feet (6,096 meters)  
Optics  
Focus Range  
4.9 - 16 feet (1.5-5 m)  
Lamp  
Type  
270-watt SHP lamp  
Input Power Requirements  
100-120VAC 5A;50/60Hz  
200-240VAC 3A; 50Hz  
Audio Input  
Input Impedance  
Maximum Input Voltage  
10K ohm nominal, AC coupled  
(L + R )  
< 4.5 V for THD 0.3%  
IN  
IN PEAK  
L
or R < 2.0 Vrms for THD 0.3%  
IN  
IN  
Sensitivity  
100 mV at 1 KHz for 88 dB SPL at 1 meter  
3.5 mm (1/8 inch) stereo phone mini  
Connector Type  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
A
p
p
e
n
d
i
x
Accessories  
Standard Accessories  
(ship with the projector)  
Quick Start card  
User’s Guide  
Soft Case  
Shipping Box  
Computer Cable 6 ft (1.8 m)  
Composite Video Cable 6 ft (1.8 m)  
Computer Audio Cable 6 ft (1.8 m)  
Audio Adapter (RCA to 3.5mm)  
Executive Plus Remote  
Projection Lamp Module  
Lens Cap  
Power Cords (one ships with projector, type depends on country)  
NOTE: Use only BOXLIGHT-  
approved accessories. Other  
North American Power Cord  
Australian Power Cord  
UK Power Cord  
products have not been tested with  
the projector.  
European Power Cord  
Danish Power Cord  
Swiss Power Cord  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Optional Accessories  
Deluxe Carry Case  
Shipping Case (ATA approved)  
Hard Travel Porter Case  
Digital Computer Cable (CD-455m and  
CD-555m only)  
Digital/Analog Interface Card (CD-455m and  
CD-555m only)  
Ceiling Mount Kit  
Ceiling Mount Plate  
CablePro II  
CablePro II Serial Cable  
CablePro III  
CablePro Lite, 6.5 ft  
CablePro Extension Cable, non-plenum rated,  
60.7 ft  
CablePro Extension Cable, plenum-rated, 60.7 ft  
Macintosh Adaptor  
CablePro RS232 Adaptor  
Full-Feature LaserPro Remote Control  
BOXLIGHT GyroMouse RF Remote (US, Mexico,  
Canada, UK only)  
Two-button Executive Remote Control  
Executive Remote IR Receiver  
Remote Point RF Remote with LaserPointer (US,  
Mexico, Canada only)  
PC Guardian Projector Cable Lock  
S-Video Cable  
40” Portable Projection Screen  
50” Portable Projection Screen  
60” Deluxe Insta-Theatre Screen  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
A
p
p
e
n
d
i
x
Portable and Laptop Activation Chart  
Many laptop computers do not automatically turn on their exter-  
nal video port when a projector is connected. Activation com-  
mands for some laptop computers are listed in the following  
table. (If your computer is not listed or the given command does  
not work, refer to the computer’s documentation for the appro-  
priate command.) On many laptops, the activation function key  
is labeled with an icon, for example  
or the text CRT/LCD.  
NOTE: Usually, pressing the key  
commands once activates the  
external video port, pressing it  
again activates both the external  
Key command to  
Key command to  
de-activate port  
Computer  
Acer  
activate port  
Ctrl-Alt-Esc (for setup)  
FN-D or Ctrl-D  
Ctrl-FN-D  
Ctrl-Alt-Esc (for setup)  
FN-D or Ctrl-D  
Ctrl-FN-D  
AST* **  
and internal ports, and pressing it  
a third time activates the internal  
port. Refer to your computer’s  
documentation for details on your  
specific model.  
FN-F5  
FN-F5  
type from A:/IVGA/CRT  
FN-F12  
type from A:/IVGA/CRT  
FN-F12  
AMS  
FN-F2  
FN-F2  
AMT  
AT&T  
setup screen  
setup screen  
FN-F3  
FN-F6  
FN-F3  
FN-F6  
Advanced Logic  
Research  
Ctrl-Alt-V  
Ctrl-Alt-V  
Altima  
Shift-Ctrl-Alt-C  
Shift-Ctrl-Alt-L  
setup VGA/  
setup VGA/  
Conf.Simulscan  
Conf.Simulscan  
Ambra**  
FN-F12  
FN-F12  
FN-F5  
FN-F5  
F2/Choose Option/F5  
setup menu  
Shift-Ctrl-D  
F2/Choose Option/F5  
setup menu  
Shift-Ctrl-D  
Amrel* **  
Apple  
Aspen  
Award  
BCC*  
see Mac Portable and Mac PowerBook  
automatic  
FN-F6  
automatic  
FN-F6  
automatic  
reboot computer  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Key command to  
activate port  
Key command to  
de-activate port  
Computer  
Bondwell  
LCD or CRT options after  
bootup  
reboot for LCD or CRT  
options to appear  
Chaplet**  
setup screen  
FN-F6  
setup screen  
FN-F6  
FN-F4  
FN-F4  
Chembook  
Commax  
FN-F6  
FN-F6  
Ctrl-Alt-#6  
Ctrl-Alt-<  
FN-F4  
Ctrl-Alt-#5  
Ctrl-Alt->  
FN-F4  
Compaq* **  
automatic  
mode/? (for setup option)  
automatic  
automatic  
mode/? (for setup option)  
automatic  
Compuadd* **  
Data General  
Alt-F for screen setup  
option  
Alt-F for screen setup  
option  
Ctrl-Alt-Command  
Ctrl-Alt-Command  
reboot  
Data General  
Walkabout  
2 CRT/X at DOS prompt  
Datavue  
DEC**  
Ctrl-Shift-M  
FN-F5  
Ctrl-Shift-M  
FN-F5  
FN-F4  
FN-F4  
Dell**  
Ctrl-Alt-<  
Ctrl-Alt->  
Ctrl-Alt-F10  
FN-F8  
Ctrl-Alt-F10  
FN-F8 (CRT/LCD)  
FN-D  
FN-D  
FN-F12  
FN-F12  
Digital*  
automatic  
reboot  
FN-F2  
FN-F2  
Dolch  
dip switch to CRT  
dip switch to CRT  
setup screen option  
Ctrl-Alt-Shift-C  
FN-F10  
dip switch to LCD  
dip switch to LCD  
setup screen option  
Ctrl-Shift-Alt-L  
Epson  
Everex*  
For-A  
Fujitsu  
Gateway  
FN-F3  
FN-F3  
FN-F1  
FN-F1/FN-F1 again simul-  
taneous  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A
p
p
e
n
d
i
x
Key command to  
activate port  
Key command to  
de-activate port  
Computer  
Grid* **  
FN-F2, choose auto or  
simultaneous  
FN-F2  
Ctrl-Alt-Tab  
Ctrl-Alt-Tab  
FN-F7  
Hitachi  
FN-F7  
Honeywell  
Hyundai  
FN-F10  
FN-F10  
setup screen option  
automatic  
setup screen option  
warm reboot  
FN-F2  
IBM 970*  
IBM ThinkPad**  
reboot, enter setup menu  
FN-F7, select choice from  
setup menu  
FN-F1, select choice  
FN-F5, select choice  
PS/2 SC select choice  
(CRT, LCD, etc.)  
Infotel  
FN-F12  
FN-F12  
Kaypro  
boot up, monitor plugged  
in  
unplug monitor  
Kris Tech  
FN-F8  
FN-F8  
FN-T  
Leading Edge  
FN-T  
Mac Portable  
100  
no video port: not compatible  
Mac PowerBook  
140, 145, 150,  
170  
no video port: requires a 3rd-party interface  
160, 165, 180,  
520, 540, 5300  
Control Panel folder, Pow- warm reboot  
erBook Display folder;  
Activate Video Mirroring  
210, 230, 250,  
270, 280, 2300  
requires Apple Docking Station or Mini Dock  
Magitronic  
Mastersport  
Micro Express*  
Micron  
FN-F4  
FN-F4  
FN-F2  
FN-F1  
automatic  
FN-F2  
warm reboot  
FN-F2  
Microslate*  
automatic  
warm reboot  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key command to  
activate port  
Key command to  
de-activate port  
Computer  
Mitsubishi  
NCR  
SW2 On-Off-Off-Off  
setup screen option  
setup screen option  
CRT at the DOS prompt  
FN-F3  
SW2 Off-On-On-On  
setup screen option  
setup screen option  
LCD at the DOS prompt  
FN-F3  
NEC* **  
Olivetti*  
automatic  
automatic  
FN-O/*  
FN-O/*  
Packard Bell* **  
FN-F0  
FN-F0  
Ctrl-Alt-<  
Ctrl-Alt->  
Panasonic  
Prostar  
Samsung*  
Sanyo  
FN-F2  
FN-F2  
Ctrl-Alt-S at bootup  
setup screen option  
setup screen option  
dip switch to CRT  
Ctrl-Shift-M  
Ctrl-Alt-S at bootup  
setup screen option  
setup screen option  
dip switch to LCD  
Ctrl-Shift-M  
Sharp  
Sun SPARC-  
Dataview  
Tandy**  
Ctrl-Alt-Insert  
setup screen option  
FN-F5  
Ctrl-Alt-Insert  
setup screen option  
FN-F5  
Tangent  
Texas Instru-  
ments*  
setup screen option  
setup screen option  
Top-Link* **  
setup screen option  
FN-F6  
setup screen option  
FN-F6  
Toshiba* **  
Ctrl-Alt-End  
FN-End  
Ctrl-Alt-Home  
FN-Home  
FN-F5  
FN-F5  
setup screen option  
FN-F7  
setup screen option  
FN-F7  
Twinhead*  
FN-F5  
FN-F5  
Automatic  
Ctrl-Alt-F10  
software driven  
FN-F10  
Automatic  
Ctrl-Alt-F10  
software driven  
FN-F10  
WinBook  
Wyse  
Zenith**  
FN-F2  
FN-F2  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A
p
p
e
n
d
i
x
Key command to  
activate port  
Key command to  
de-activate port  
Computer  
FN-F1  
FN-F1  
Zeos**  
Ctrl-Shift-D  
FN-F1  
Ctrl-Shift-D  
FN-F1  
*
These manufacturers have models that automatically send video  
to the external CRT port when some type of display device is  
attached.  
** These manufacturers offer more than one key command depend-  
ing on the computer model.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Video Mirroring with a PowerBook Computer  
When you turn video mirroring (called SimulScan in newer Pow-  
erBooks—see below) on, the projector displays the same informa-  
tion that appears on your PowerBook’s built-in screen. When  
video mirroring is off, the projector acts like a separate display.  
To turn on video mirroring for the first time:  
1 Open the Monitors control panel; click on Monitor 2.  
2 Set the number of colors you want.  
3 Open the Control Strip, then click on the monitor icon.  
4 Select “Turn Video Mirroring On.”  
Now you can turn video mirroring on and off from the Control  
Strip without having to open the Monitors control panel again.  
When using video mirroring and high color graphics such as  
slide shows, the projected image occasionally might turn black  
and white. If this happens, perform the following steps:  
1 Turn off video mirroring.  
2 Open the Monitors control panel.  
3 Move the white menu bar to Monitor 2 to set the projector as  
the primary monitor.  
4 Restart the PowerBook.  
Using SimulScan  
Some newer PowerBooks display images on an external monitor  
or projector differently than previous ones. When using  
SimulScan, the projector displays the same information that  
appears on your PowerBook  
To select SimulScan:  
1 Open the Control Panel, then double-click Monitors and  
Sound.  
2 In the Resolution list, choose the SimulScan mode, then click  
OK.  
3 If this changes your display settings, a dialog box appears.  
Click OK to confirm the change.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
A
p
p
e
n
d
i
x
Projected Image Size  
NOTE: Use the graph and tables  
to help you determine projected  
image sizes.  
FIGURE 24  
Projected image size  
Table 1:  
Image Size, Width and Height-maximum image size  
Distance to  
Screen (ft/m)  
Diagonal  
(ft/m)  
Width  
(ft/m)  
Height  
(ft/m)  
4.9/1.5  
8.0/2.4  
12.0/3.7  
16.0/4.9  
20.0/6.1  
30/9.1  
3.0/0.9  
5.0/1.5  
7.4/2.3  
9.9/3.0  
12.4/3.8  
18.6/5.7  
2.4/0.7  
4.0/1.2  
6.0/1.8  
7.9/2.4  
9.9/3.0  
14.9/4.5  
1.8/0.6  
3.0/0.9  
4.5/1.4  
6.0/1.8  
7.42.3  
11.2/3.4  
Table 2:  
Image Size, Width and Height-minimum image size  
Distance to  
Screen (ft/m)  
Diagonal  
(ft/m)  
Width  
(ft/m)  
Height  
(ft/m)  
4.9/1.5  
8.0/2.4  
12.0/3.7  
16.0/4.9  
20.0/6.1  
30/9.1  
2.5/0.8  
4.0/1.2  
6.0/1.8  
8.0/2.4  
10.0/3.0  
15.0/4.6  
2.0/0.6  
3.2/1.0  
4.8/1.5  
6.4/2.0  
8.0/2.4  
12.0/3.7  
1.5/0.5  
2.4/0.7  
3.6/1.1  
4.8/1.5  
6.0/1.8  
9.0/2.7  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
cases, ordering 42  
centering the image 17, 26  
INDEX  
A
accessories, ordering 42, 43  
not displayed 38  
adjusting  
brightness 21  
color 22  
Macintosh 2  
contrast 21  
tint 21  
volume 19, 23  
computers  
altitude limits 41  
assistance. See Technical Support  
audio adapter, connecting 12  
audio cable, connecting 10  
Audio menu 23  
Audio menu options  
Bass 23  
audio cable 10  
computers 9  
power cord 13  
Treble 23  
remote 10  
Volume 23  
Auto Source Select 28  
Ceiling Projection 27  
Display Messages 28  
Display Startup Screen 29  
Plug and Play 28  
Rear Projection 28  
Standby Time 27  
Video Standard 27  
B
bass 23  
Blank Screen 22  
brightness, adjusting 21  
buttons on keypad  
Menu 18  
Source 18  
Standby 19  
Volume 19  
C
cables  
audio 10  
audio adapter 12  
composite video 11  
extension 43  
M1-DA analog computer cable 3,  
8, 9  
ordering 42  
51  
power 42  
S-video 11, 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
I
n
d
e
x
D
Default Source 28  
Display menu 21  
Display menu options  
Blank Screen 22  
Brightness 21  
Color 22  
focusing 17  
Contrast 21  
Reset All 22  
Sharpness 22  
not centered 38  
not displayed 37  
out of focus 38  
Tint 21  
Display Messages 28  
Display Startup Screen 29  
displaying  
startup screen 29  
status messages 28  
reversed 28, 39  
size 7, 50  
E
zooming 17  
elevator button/foot 17  
extension cable 43  
Image menu 24  
Image menu options  
Auto Image 24  
Horiz. Position 26  
Keystone 24  
F
focusing the image 17  
fuzzy lines 25  
Manual Sync 25  
Overscan 24  
H
HDTV 2, 11, 24  
height adjustment 17  
Resize 24  
Vert. Position 26  
K
keypad 18  
keystone correction 24  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L
lamp  
ordering 42  
changing language of 29  
Controls menu 27  
replacing 33  
turns off unexpectedly 40  
Language menu 29  
language, selecting for menus 29  
laptop computers  
compatibility 9  
Image menu 24  
Language menu 29  
Status menu 30  
connecting 9  
LED 13, 18, 19, 30, 33  
lens  
P
cap 42  
Plug and Play 28  
cleaning 33  
leveling knob 17  
connecting 13  
leveling the projector 17  
M
M1-DA analog computer cable 3, 8, 9  
Macintosh computers  
compatibility 2  
connecting 9  
Menu button 20  
menus. See on-screen menus  
monitor, projected colors don’t match  
39  
project from behind the screen  
27, 28  
setting up 7  
mouse  
specifications 41  
turning off 14  
buttons on keypad 18, 20  
buttons on remote 15, 20  
connecting USB 10  
turning on 13  
N
NTSC video 27  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I
n
d
e
x
R
rear projection 28  
remote control  
advancing PowerPoint slides  
connecting 10  
test pattern 37  
controlling the computer with 10,  
text not visible 38  
tint, adjusting 21  
using 15, 18  
troubleshooting 37  
turning off the projector 14  
turning on the projector 13  
re-positioning the image on the screen  
26  
resetting adjustments 22  
resetting the lamp hour counter 35  
resizing video 24  
USB mouse 10  
resolution 1  
vertical lines displayed 25, 39  
video mirroring on a PowerBook 49  
S
safety guidelines iii  
video standards 27  
SECAM video 27  
security lock 36, 43  
sharpness 22  
Volume buttons 19  
Source button 18  
specifications 41  
Standby button 19  
Standby Time 27  
startup screen 29  
Status menu 30  
W
widescreen video 25  
Z
zooming the image 17  
S-video  
connecting 11  
ordering cable 43  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
BOXLIGHT Corporation (“BOXLIGHT”) warrants that each CD-454m, CD-455m and CD-555m (“the Product”) sold hereunder  
will conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply  
only to the first person or entity that purchases the Product for personal or business use and not for the purpose of distribu-  
tion or resale. Said warranty shall continue for a period of two (2) years from the date of such purchase. The standard lim-  
ited warranty excludes the lamps in projectors after 120 days and the accessories after one year. BOXLIGHT does not warrant  
that the Product will meet the specific requirements of the first person or entity that purchases the Product for personal or  
business use. BOXLIGHT’s liability for the breach of the foregoing limited warranty is limited to the repair or replacement of  
the Product or refund of the purchase price of the Product, at BOXLIGHT’s sole option. Replacement Product may be re-fur-  
bished in “like-new” condition, at BOXLIGHT’s sole discretion. To exercise the Purchaser’s rights under the foregoing war-  
ranty, the Product must be returned at the Purchaser’s sole cost and expense, to BOXLIGHT or to any authorized BOXLIGHT  
service center provided, and the Product must be accompanied by a written letter explaining the problem and which  
includes (i) proof of date of purchase; (ii) the dealer’s name; and (iii) the model and serial number of the Product. When  
sending your unit in for repair, please ship your unit in its original packing material or a BOXLIGHT approved ATA Ship-  
ping Case, or have a professional packaging company pack the unit. Please insure your shipment for its full value. A return  
authorization number, issued by the BOXLIGHT customer service department, must also be clearly displayed on the outside  
of the shipping carton containing the Product.  
WARRANTY LIMITATION AND EXCLUSION  
BOXLIGHT shall have no further obligation under the foregoing limited warranty if the Product has been damaged due to  
abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modifications, tampering, alterations,  
or service other than by BOXLIGHT or its authorized agents, causes other than from ordinary use or failure to properly use  
the Product in the application for which said Product is intended.  
DISCLAIMER OF UNSTATED WARRANTIES  
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER  
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-  
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES  
THAT EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE EXTENDED,  
ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY BOXLIGHT. SOME STATES DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO  
YOU.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITATION OF LIABILITY  
IT IS UNDERSTOOD AND AGREED THAT BOXLIGHT’S LIABILITY WHETHER IN CONTRACT, IN TORT, UNDER  
ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF  
THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL BOXLIGHT BE LIABLE  
FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, LOST REVENUES OR  
LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT IS A CONSIDERATION IN LIMITING BOXLIGHT’S LIABIL-  
ITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT  
MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED.  
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-  
AGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES  
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO  
STATE.  
Part Number 010-0280-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Network Card F5D8053 User Manual
Belson Hair Dryer CM2938 User Manual
Black Box Switch SW590A R2 User Manual
Bose Speaker AM323023 User Manual
Canon Carrying Case 60 User Manual
Carrier Air Conditioner 39E ER User Manual
CFM Fan AFK 0906 User Manual
Christie Digital Systems Home Theater System DW Series User Manual
Cisco Systems IP Phone OL 142197 User Manual
Cisco Systems Network Card WIC 1T User Manual