802.11g Wireless Broadband Router
Model # AR335W
Quick Installation Guide
Ver. 1A
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2
Verifying Connection to the Router
Step 1 Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows
2000/XP) and click OK. You will see the command prompt as below.
Step 2 Type ping 192.168.1.1 and press Enter. You should get four reply responses back.
Step 3 If you get Request timed out, or Destination host unreachable, double-check the
network cable connection between the computer and the router and try Step 2 again. If you
still encounter problem, go to the next step; otherwise proceed to Section 3, Configuring the
Router.
Step 4 For Windows 2000/XP, type ipconfig/release and press Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x
(where x is a number between 2 - 254). Proceed to Section 3, Configuring the Router. If
you don’t get an IP address, reset the router by holding in the reset button on the back of the
router for 10 seconds while it is ON and try ipconfig/renew again.
Step 6 For Windows 95/98/ME go to Start, Run, type winipcfg and click OK.
Step 7 Select your network card from the drop-down menu and click Release.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 8After your IP address is released, click Renew. You should get an IP address of
192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset
the router by holding in the reset button on the back of the router for 10 seconds while it is ON
and try Renew again.
Section 3
Configuring the Router
Step 1 Open the web browser and type 192.168.1.1 in the URL Address field and press
Enter.
Step 2 Enter admin for both username and password fields and click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Select the proper region, North America or South America, and click Apply.
Warning: Incorrectly selecting the current region of operation may result in illegal operation
and may cause harmful interference to other systems. You can refer to the user manual in the
provided CD for more details.
Cable Modem
For most cable modem users, you should be able to connect to the Internet without any
configuration. If your ISP has provided you with a host name, enter it in the optional Host
Name field.
If your ISP requires a registered MACAddress, click on the Clone MAC Address button.
Click Apply and OK to save the settings.
Go to Status tab, Internet connection section to verify that you get the valid IP address
information. If you have trouble connecting to the Internet, please go through the
Troubleshooting section at the end of this installation guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
DSL
For DSL users, follow the steps below to configure the router.
Step 1 Select PPPoE from the drop-down menu.
Step 2 Enter your username and password provided by your ISP.
Note: Depending on the ISP, you may need to include the domain name with your username.
Example:
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Click Apply and OK to save the settings.
Go to Status tab, Internet connection section to verify that you get the valid IP address
information. If you have trouble connecting to the Internet, please go through the
Troubleshooting section at the end of this installation guide.
Section 4
Connecting the Router Wirelessly
Below are the default wireless settings of the router. You must configure your wireless
network card to the same settings in order to establish a wireless connection to the router.
Please refer to your wireless network card’s manual on how to configure these settings.
SSID: default
Operating Mode: Infrastructure
Authentication: Open System
Channel #: 6
WEP: disabled
If you want to change the router’s wireless settings, log in to the router and select the Wireless
tab. Be sure to click Apply and OK to save the settings.
For information on changing the router’s log in password and enabling wireless encryption,
please refer to the User’s Manual in the provided CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5
Troubleshooting
If you have trouble connecting to the Internet, try the following steps.
Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes.
Step 2 Turn on the Cable/DSL modem and wait for the lights on the modem to settle down.
Step 3 Turn on the router and wait for the lights on the router to settle down.
Step 4 Turn on the computer.
Step 5 Reconfigure the router as described in Section 3.
Step 6 Log in to the router and select the Status tab.
Step 7 Verify that the IP Address, Default Gateway, and at least one of the DNS fields
have valid numbers assigned to them (instead of all 0’s).
If each field has a valid number assigned, the router is connected to the Internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
*Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and construction, mix of
wireless products used, radio frequency interference (e.g., cordless telephones and microwaves) as well as network overhead
lower actual data throughput rate.
Copyright © 2007 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all
other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and
service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products
are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights.
Download from Www.Somanuals.com. All Manuals Search And Download.
|