Wireless N 150 High Power USB Adapter
with 5dBi High Gain Antenna
Model # AWLL5166HP
User’s Manual
Rev. 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Congratulations on your purchase of the Airlink101 Wireless N 150 High Power USB
Adapter! This is the perfect product for your desktop computer or laptop in an environment
that demands stronger wireless signal reception. Its high power technology and 5dBi high
gain antenna strongly boost up the signal strength and extend extra coverage. Highest
data rate of up to 150Mbps*, which is 3 times faster than Wireless G and its broad
bandwidth allow smooth and reliable multimedia content transmission over your wireless
network. The adapter will yield a higher throughput especially when it is used with
AR570W Airlink101® Wireless N 150 Router.
A full range of security features WEP, WPA-PSK, and WPA2-PSK provide you the highest
level of wireless network security. The bundled wireless utility Airlink101 Wireless Monitor
allows you to set up the adapter with an easy-to-use user interface. The Wireless N 150
High Power USB Adapter works with 802.11 b/g/n network devices to ensure compatibility
with your existing wireless products.
1.1 Package Contents
Before you begin the installation, please check the items of your package. The package
should include the following items:
• Wireless N 150 High Power USB Adapter
• 5dBi High Gain Antenna
• Installation CD (Driver/Utility/Manual)
• Quick Installation Guide
1.2 Features
• High power technology with detachable 5dBi high gain antenna strongly boosts the
signal strength and coverage
• Data rate of up to 150Mbps* with Wireless N technology, 3 times faster than
802.11g
• Great for environment needs extra long range extender
• WPA2/WPA-PSK enhanced wireless security provide full protection for your
network
• Built-in Easy Setup Button for easy connection to existing wireless network
• Compact size and low profile design
• Compatible with both Windows and MAC OS (Intel-based)
• RoHS compliant
• Works best with Airlink101® Wireless N Router
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Install Wireless USB Adapter
This section provides instructions on how to install the Wireless N 150 High Power USB
Adapter. The driver is installed along with the utility.
Step 2.1 Fasten the provided 5dBi antenna to the USB adapter.
Step 2.2 Insert the USB adapter into an available USB port of your computer.
Step 2.3 Click Cancel when you see the Found New Hardware Wizard.
Windows XP/2000 Users:
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows Vista Users:
Step 2.4 Insert the Installation CD in the CD drive. The Autorun screen will pop up. Select
Install Utility and Driver from the menu.
Note: If the Autorun screen doesn’t appear automatically, go to to My Computer →
Explore the CD Drive → go to Utility folder, then run Setup.exe.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 7/Vista Users: When you get warning message(s), make sure that you give
permission to continue with the installation of the driver software.
Step 2.5 Click Next to start the installation.
Step 2.6 Please wait when Windows is installing the driver for Airlink101 Wireless Adapter.
Step 2.7 For Windows XP, click on Continue Anyway.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 7/Vista Users: click on Install this driver software anyway.
Step 1.8 Select Yes, I will restart my computer now. Click Finish to complete the
installation.
The driver and utility have been installed successfully. Please continue to Chapter 3.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect to Wireless Network
This section describes how to connect your wireless USB adapter to a wireless network.
Step 3.1 Open the Airlink101 Wireless Monitor utility by double clicking on the icon in the
system tray at the bottom right-hand corner of your screen.
Or you can double click on the Airlink101 Wireless Monitor icon on the desktop.
The Airlink101 Wireless Monitor will come up:
Step 3.2 (Optional)
The Easy Setup Button (Wi-Fi Protected Setup) is a new and easy way to configure the
encryption for your wireless network clients. In order to use it, you need to have a router
that supports this feature.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If your router doesn’t support Easy Setup Button feature (Wi-Fi Protected Setup),
please go to Step 3.3.
A) Push the Easy Setup Button of the Adapter until you see the following window pops
up on your computer monitor.
This window pops up to acknowledge you the wireless adapter is starting to establish a
connection with the Router/AP.
B) Within the following 2 minutes, push the Easy Setup Button (WPS Button) on the
back of the Router. The picture shows Airlink101 AR570W Wireless N 150 Router.
Note: Depending on different
type of routers, you may have
to push the WPS button on the
router first, then push the WPS
button on the adapter.
Please refer to the router’s
manual and make sure the
WPS session is activated.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
C) The router will now start to synchronize the encryption settings with the wireless
adapter. The connection will be established in few seconds. Continue to Step 3.5.
If the connection is unable to establish, continue to Step 3.3.
Step 3.3 Click the Available Network tab of the Wireless Monitor, select the wireless
network that you wish to connect to, and click Add to Profile.
If the network that you are attempting to connect does not have encryption enabled, you
will receive a warning about connecting to an unsecured network. Click OK to complete
the connection. Go to Step 3.5.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3.4 Enter the wireless security key into the Network Key and Confirm Network
Key boxes. Click OK.
The wireless adapter will automatically detect the type of Network Authentication and the
Data encryption.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3.5 The connection should be now established. Under the utility Airlink101 Wireless
Monitor, go to General tab to check the status of the connection. Verify that IP Address,
Subnet Mask and Gateway have valid numbers assigned to them (instead of all 0’s). The
Status should be Associated, and there should be green bars next to Signal Strength and
Link Quality.
Congratulations! You have now connected to the wireless network successfully.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Wireless Monitor
This section describes the various functions of the Wireless Monitor that you can
configure, including the settings of wireless encryption.
4.1 General
The General tab provides you with the status of the current connection, including signal,
network name (SSID) and IP Address.
At the bottom, you have options for controlling the utility and adapter:
Show Tray Icon: Check this box to show or hide the utility icon on the task bar.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Off: Check/uncheck this box to turn off/on the wireless function of the adapter.
Disable Adapter: Check/uncheck this box to disable/enable the wireless adapter.
For Windows XP users, you will see a checkbox “Windows Zero Config” which can be
used to enable or disable the Windows XP’s built-in wireless utility, Windows Zero
Configuration. It is suggested NOT to check this box and use Airlink101 Wireless Monitor
that provides more advanced features to manage your wireless connection.
Windows Zero Config: Check/uncheck this box to disable/enable Airlink101 Wireless
Monitor.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Profile Settings
The Profile tab lists the current profiles and allows you to add/remove/edit profiles.
The Available Profile(s) box lists all the profiles that you’ve created for your network. A
profile is automatically created and added to this list when you connect to a new network.
You can also manually add a profile.
To modify an existing profile, select the profile from the Available Profile(s) box and
click on Edit. The Profile box will appear allowing you to modify the settings for this
profile
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The Profile box will appear allowing you to specify
To create a new profile, click on Add.
the settings for your new profile.
Enter the profile settings here, including Profile Name, SSID, Network Authentication,
Data Encryption and Network Key. Click OK to save the changes.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Available Network
The Available network tab lists all of the networks that the adapter detects in your area.
Clicking Refresh will refresh the list. To connect to a network, select a network from the
list and click Add to Profile.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Status
The status section provides you with a list of information about the current status of the
adapter.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5 Statistics
The Statistics section gives you information about transmit and receive packet count.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4.6 Wi-Fi Protected Setup (Easy Setup Button)
The Wi-Fi Protected Setup™ (Easy Setup Button) is a new and easy way to configure
the encryption for your wireless network clients. In order to use it, you need to have a
router that supports this feature, like the AR570W Airlink101 Wireless N 150 Router.
You also need to configure the wireless encryption for your router; you should be able to
find the instructions of how to configure it in the router’s user manual. If your wireless
router does not support this feature, you will need to set up the wireless security manually
and you can skip this section.
We are using the Wireless N 150 High Power USB Adapter and the AR570W Airlink101
Wireless N 150 Router to illustrate the following setup instructions.
Step 4.6.1 Open the Airlink101 Wireless Monitor. Click the Wi-Fi Protect Setup tab.
Choose your configuration method:
- For Push Button method, click Push Button Config (PBC) button, continue to Step
4.6.2
- For Pin Input Config method, click Pin Input Config (PIN) button, continue to Step
4.6.3a
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4.6.2 When you see this window pops up,
Within the following 2 minutes, push the Easy Setup Button (i.e. WPS button) on the back
of the router and hold for 1 second.
The router will now start to synchronize the security settings with the wireless USB
adapter. The connection will be built in few seconds.
Step 4.6.3a If you choose the Pin Code method, click Yes when prompted with the
question “Do you want to select a specific AP?”.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the Access Point that you want to connect, and then click Select.
Write down the PIN Code on a piece of paper.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
(The following steps are different for each router. Please refer to the user’s manual of
your router for detailed instructions.)
Step 4.6.3b Log on to the router AR570W’s web configuration page from the browser
(i.e. Internet Explore or Mozilla Firefox) and click on Wireless. Then click WPS.
Step 4.6.3c Make sure that the Enable WPS is NOT checked. Enter the Pin Code in the
Configure by Client PinCode box and click Start PIN.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
After a few moments both the router configuration screen and the adapter configuration
screen should show a message telling you that a connection is established.
Note: If you cannot connect successfully with WPS, you need to log in to your router’s
configuration and make sure the WPS feature is enabled.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4.7 Ad-hoc and Peer-to-Peer Wireless Networks
Ad-hoc networking is used when you want to connect two or more computers together
without going through a router.
In ad-hoc mode, you lose a lot of the features that come with a router. The maximum
connection speed drops to 11Mbps. In addition, WEP encryption is the only security
available in ad-hoc mode.
To set up ad-hoc mode, you will need to create a new profile.
Step 1 Open the Wireless Monitor
.
Step 2 Click on Profile and click on Add. The profile settings box will appear
.
Step 3 Check “This is a computer to computer (adhoc) network; wireless access
points are not used”.
Step 4 Enter a network name (SSID) into the SSID box. Select your desired Channel.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 Set up security: you can only choose between no security, WEP or WPA2-Personal
(WPA2-AES) security. You can refer to the instructions in 4.8 Configuring Encryption.
Step 6
Click OK to save the profile.
Step 7 Select your new profile from the Available Profile(s) box, and click on Set Default to
enable it.
You need to configure all other computers that you are planning on connecting to your
ad-hoc network with the same settings that you configured on this computer. Every
computer has to be set up exactly the same. If any of the settings are different, the
network will not function.
Note: If you are having trouble connecting, slow connection, or connection is unstable, you
will want to try changing channels. Start with channel 1 and work your way up until you find
a channel that gives you the best connection. Each time you change the channel, save the
settings then reboot the computer. Also, make sure that you do this on every ad-hoc
machine so that they will all be set to the same channel.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8 Configuring Encryption
This section describes the available encryption types and how to configure them. In most
cases, encryption type will be automatically detected by the wireless USB adapter; all you
need to do is to enter the Network key, as described in Chapter 3, Step 3.4.
If you are creating a custom profile, you need to manually configure the encryption settings.
The encryption settings you configure must match the settings on the AP or wireless router
you wish to connect to. Please follow the instructions below.
Open the Wireless Monitor utility, click Profile tab and then click Add.
The available options of wireless network encryption settings are:
Disable: No encryption in use
WEP: The most popular but least secure form of encryption (Open System/Shared Key)
WPA/WPA2-PSK: The most secure and recommended level of encryption
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8.1 Configuring WEP encryption
Select WEP from the Data encryption box.
Under Network Authentication, select either Shared key or Open System, depending
on the router settings.
If your WEP key is 5 or 13-digit, alphanumeric :
• Check ASCII and enter your WEP key into the box next to Passphrase.
If you use Passphrase to setup the WEP encryption for your router :
• Check PASSPHRASE and enter your key into box next to Passphrase.
If your WEP key is 10 or 26-digit, hexadecimal (0~9, A~F) :
• Key Index is the key of the router that is currently in use. Enter the network
security key that matches the one on the router to Network key and Confirm
network key boxes.
Click OK to save your settings.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8.2 Configuring WPA/WPA2-PSK Encryption (for home users)
Select WPA-PSK/WPA2-PSK from the Network Authentication box.
Under Data encryption select either AES or TKIP depending on the settings for your
router.
Enter the encryption key that the router is using into the Network Key, Confirm network
key boxes.
Click OK to save your settings.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8.3 Configuring WPA/WPA2 Encryption (for corporate networks)
Select WPA 802.1x / WPA2 802.1x from the Network Authentication box and click OK.
The following window will pop up after few seconds.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
You can choose a network authentication method: Protected EAP or Smart Card or
other Certificate then click Settings to configure the advanced settings.
1) Choose Protected EAP then click on Settings to configure the advanced security
settings.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure the advanced security settings for PEAP then click OK. Refer to your system
administrator for information about what settings you should enter here.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Choose Smart Card or other Certificate then click on Settings to configure the
advanced security settings. Refer to your system administrator for information about what
settings you should enter here.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9 About
The About window provides the information about the Wireless Monitor Utility version and
the current driver version.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Troubleshooting
1. If you cannot open the wireless monitor utility, make sure that the USB adapter is
inserted firmly into the USB port.
2. If you cannot connect to the wireless router, you may want to double check the wireless
security settings on the router. The network key you entered in Step 3.4 must match with
the settings on the wireless router.
3. If you are experiencing problems with the connection such as low signal strength, slow
connection speed, or unstable wireless connection, you can try to tune your router’s
signal by changing the channels on the router and/or by adjusting the direction of the
antenna(s). You do not need to change the channel on the Adapter; it will automatically
pick up the new channel after you reboot the router. Your router has 11 different channels
to choose from. Keep going through the channels until you find one that gives you a
stable connection. For instructions on changing channels, refer to the documentation that
comes with the router.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Install Wireless USB Adapter on MAC OS
This section provides instructions on how to install the Wireless N 150 High Power USB
Adapter on MAC OS. The driver is installed along with the utility.
NOTE: DO NOT PLUG IN THE USB ADAPTER UNTIL THE DRIVER IS INSTALLED!
6.1 Install Driver and Utility
Step 1 Insert the provided CD into the CD drive.
Step 2 Explore the CD content, go to MAC > 10.4, 10.5 or 10.6 (depends on your MAC
OS version). Double click on Installer.pkg to start installing the driver & utility.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Introduction: The “Install Wireless N USB Adapter Driver” window will pop up.
Click Continue.
Step 4 Read Me: Read the instruction of installation. Click Continue to begin the
installation.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 License: Click Continue.
Step 6 Click Agree to install.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7 Installation Type: click Install to perform a standard installation.
Enter your password and click OK.
Step 8
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Click Continue Installation.
Step 9
Step 10 Install: Wait while the software is being installed.
Step 11 Summary: Click Restart to restart your computer.
Go to Chapter 2 after the computer is restarted.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Enable the Wireless USB Adapter
This section describes how to enable your wireless USB adapter before you can
connect to a wireless network.
Step 1 After the computer is restarted, insert the Wireless USB Adapter into an
available USB port on your computer.
For 10.6 MAC users:
After the computer is restarted, you will see this notice popping up on your screen to
inform you to enable the wireless card.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 Go to System Preferences > Network.
You should see RTL8188S WLAN Adapter in the list, if not, please click “+” to add a
new network interface.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Click on the Interface drop-down list and select RTL8188S WLAN Adapter
and click Create. Click Apply to save the settings.
Step 4 Click Apply to save the settings.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
For 10.4/10.5 MAC users:
Step 2 Go to System Preferences > Network, select Network Port Configurations
from Show.
Step 3 Check the Ethernet Adaptor (Wireless N USB Adapter) and uncheck
AirPort. Click Apply Now.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 Connect to Wireless Network
This section describes how to connect your wireless USB adapter to a wireless
network.
Step 1 Wireless Network Utility should automatically pop up on your screen after
rebooting your computer; if not, open the Wireless Monitor utility by clicking on its icon
in the system tray.
The Wireless Network Utility will appear on your monitor.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 Click the Available Network tab, select the SSID (Network Name) of the
wireless network you wish to connect to, and click Add to Profile.
If the network that you are attempting to connect does not have encryption enabled, you
will receive a warning about connecting to an unsecured network. Click OK to complete
the connection. Go to Step 4.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Enter the network security key of your wireless router or AP into Network key
and Confirm network key boxes.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 The connection is now established. You can check the status of your connection
under “Link Status” tab. The Connection should be Connected, and there should be a
blue bar displaying the Signal Strength.
Congratulations! You have now successfully connected to the wireless network. You
may refer to the Chapter 4 Configure Wireless Monitor for detailed instructions of other
advanced features of Wireless N USB Adapter.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Specification
Standard
Antenna Type
• Deatachable 2.4GHz 5dBi Indoor
Omni Antenna
• IEEE802.11 b / g / n
Frequency Range
• 2.4 GHz
VSWR
• <1.5 max (0-6 GHz)
Interface
Beam Width-H Plane
• 360°(Vertical)
• USB2.0, USB1.1 Compliant
Access Method
• Infrastructure Mode, Ad-Hoc Mode
(802.11b Ad-Hoc), Roaming
Beam Width-E Plane
• 60°
Data Rate
Polarization
• 11b: 1 / 2 / 5.5 / 11Mbps (auto
sensing)
• Vertical (Linear)
Impendence
• 50 Ohm
• 11g: 6 / 9 / 12 / 18 / 24 / 36 / 48 /
54Mbps (auto sensing)
• 11n: up to 150Mbps*
Antenna Connector
• Reverse SMA Male Plug
Transmit Power
• Up to 23 dBm
System Requirements
LED
• Windows 7/Vista/XP/2000
• MAC 10.4/10.5/10.6 (Intel-base)
• Available USB Port
• Power/Link
Security
• WPA2/WPA-PSK
• WEP 64/128-bit
• 802.1x (supported in Windows
only)
Dimensions
• USB Adapter:
60 x 16 x 9 mm (L x W x H)
• Antenna: 198mm
Quality of Service
• WMM, 802.11e
Operation Temperature
• 32 °F ~ 131 °F (0 °C ~ 55 °C)
Operating Humidity
• 10% ~ 80% (non-condensing)
Warranty
• 1-Year Limited Warranty
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
Web Site: www.airlink101.com
*Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput
will vary. Network conditions and environmental factors, including volume of network traffic, building materials and
construction, mix of wireless products used, radio frequency interference (e.g., cordless telephones and microwaves)
as well as network overhead lower actual data throughput rate. Compatibility with 802.11n devices from other
manufactures is not guaranteed. Specifications are subject to change without notice. Photo of product may not reflect
actual content. All products and trademarks are the property of their respective owners. Copyright ©2011 Airlink101®
49
Download from Www.Somanuals.com. All Manuals Search And Download.
|