ColorTV
Directions for Use
Model No.:
Serial No.:
Important!
Return your
Warranty
Registration Card
within 10 days.
See why inside.
Need help?
Call us!
Philips representatives are ready to help you with any questions
about your new product. We can guide you through
Connections, First-time Setup, or any of the Features.
We want you to start enjoying your new product right away!
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT.
Visit us on the web at
Printed in China
3141 055 22001
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and third grounding prong.
The wide blade or third prong are provided for your safety.When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
E.
The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of
its cabinet design.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsus-
pectingly fall from the top of the set and cause product damage
and/or personal injury.
8.
9.
18. Wall or Ceiling Mounting - The appliance should be mount-
ed to a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an anten-
na discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure below.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appara
tus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.comply with recommended international global safety
standards for tilt and stability properties of its cabinet design.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materi-
als may be regulated due to environmental considerations. For dispos-
al or recycling information, please contact your local authorities or
22. Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
16. Damage Requiring Service - The appliance should be serv-
iced by qualified service personnel when:
Example of Antenna Grounding
A.
B.
The power supply cord or the plug has been damaged; or
Objects have fallen, or liquid has been spilled into the appli-
ance; or
as per NEC - National Electric Code
C.
D.
The appliance has been exposed to rain; or
The appliance does not appear to operate normally or
exhibits a marked change in performance; or
GROUND CLAMP
ANTENNA LEAD IN WIRE
Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
3
PANEL LAYOUT
Side 1
Panel
Sequence
and
MODEL
REGISTRATION
INFORMATION
PA1NEL PA2NEL
SAFETY
INFO
COVER
Panel Index
PA3NEL PA4NEL PA5NEL PA6NEL PA7NEL PA8NEL
PA9NEL PA1N0EL PA1N1EL PA1N2EL PA1N3EL PA1N4EL
Side 2
PANEL PANEL
PANEL PANEL PANEL PANEL
19 20
15 16 17 18
PANEL PANEL PANEL PANEL PANEL PANEL
21 22 23 24 25 26
PANEL PANEL PANEL PANEL PANEL PANEL
27 28 29 30 31 32
PANEL INDEX
Subject
Panel No. (Page No,) Subject
Panel No. (Page No.)
Antenna Basic Connection . . . . . . . . .1 (5) AutoPicture™ Control . . . . . . . . . .26 (30)
Audio/Video Connections AutoSound™ Control . . . . . . . . . . .27 (31)
AV1 Input Jacks . . . . . . . . . . . . . . . .5 (9) Basic Remote Operation . . . . . . . . . .4 (8)
External Audio System . . . . . . . . . .8 (12) Basic Television Operation . . . . . . . . .4 (8)
Front Audio/Video Input Jacks . . . .6 (10) Cable/Cable Box Basic Connection 2-3 (6-7)
Headphone Jack . . . . . . . . . . . . . . .6 (10) Closed Caption Control . . . . . . . . .24 (28)
Monitor Output Jacks . . . . . .8-9 (12-13) Factory Service Locations . .30-31 (34-35)
S-Video Input Jacks . . . . . . . . . . . .7 (11) Format Control (4:3 Expand) . . . . .16 (20)
AutoLock™ Controls
Install Menu Controls . . . . . . . . . . .13 (17)
Access Code . . . . . . . . . . . . . . . . .18 (22) Limited Warranty . . . . . . . . . . . . . .32 (36)
Block All Channels . . . . . . . . . . .20 (24) Onscreen Menu Navigation . . . . . .12 (16)
Block Channels . . . . . . . . . . . . . .19 (23) Picture Menu Controls . . . . . . . . . .14 (18)
Clear All Blocked Channels . . . . .20 (24) QuadraSurf™ . . . . . . . . . . . .28-29 (32-33)
Movie Ratings . . . . . . . . . . . . . . .21 (25) Remote Batteries . . . . . . . . . . . . . . . .4 (8)
Other Blocking Options . . . . . . . .23 (27) Remote Control Button Descriptions
TV Ratings . . . . . . . . . . . . . . . . . .22 (26)
. . . . . . . . . . . . . . . . . . . . . .10-11 (14-15)
Understanding AutoLock™ . . . . .17 (21) Sleeptimer . . . . . . . . . . . . . . . . . . .25 (29)
Sound Menu Controls . . . . . . . . . .15 (19)
4
BASIC CABLE AND ANTENNA CONNECTIONS
1
Antenna Connection
our home’s signal input might come
Yfrom a single (75 ohm) round cable, a
Converter Box or from an antenna. In
either case the connection to the TV is
very easy.
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
Monitor
out
AV1
in
75
⍀
VIDEO
L
AUDIO
R
S-VIDEO
If your Cable TV signal or
300 to 75Ω
Adapter
Antenna signal is a round cable
(75 ohm) then you're ready to con-
nect to the TV.
Back of TV
1
If your antenna has flat twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the
screws on a 300 to 75 ohm adapter.
If you have a Cable Converter
Box: Connect the Cable TV signal
to the Cable Signal IN(put) plug on
the Converter.
1
2
75 ⍀
Twin Lead
Wire
Round Cable
75Ω
Connect the Cable TV cable or
Antenna cable (or 300 to 75 ohm
Cable/Cable Box Connection
2
adapter) to the 75Ω plug on the TV.
If you have a Cable Converter Box:
Connect the OUT(put) plug from the
Converter to the 75Ω plug on the TV.
Monitor
out
AV1
in
75
⍀
VIDEO
L
AUDIO
R
S-VIDEO
Back of TV
Cable
Company
Signal
HELPFUL HINT
Be sure to set the TV for the type signal
you've connected (see the “Install Menu
Controls” section of this manual.)
1
75 ⍀
To set the TV to select only the channel
numbers in your area see how to
“Program" or "Add" channels in the
TV’s memory, see the Auto Program
section of this manual.
OUT
IN
Round Cable
2
Cable Box
75Ω
5
CABLE BOX CONNECTIONS
2
f you cable signal uses a cable box or
Idecoder, follow the easy steps below to
complete the connection.
Cable Box (w/RF In/Outputs):
This connection will be mono.
Connect the Cable Company sup-
Cable Signal IN
from the Cable
Company
Output Channel Switch
3
2
OUTPUT
CH
plied cable to the signal IN(put)
1
3
4
plug on the back of the Cable Box.
CABLE
IN
TO TV
Jack Panel Back of Cable Box
Using a separate round coaxial cable,
connect one end to the OUT(put)
(TO TV) plug on the back of the
Cable Box.
2
4
Connect the other end of the round
coaxial cable to the 75Ω input on the
back of the television. Screw it down
finger tight.
Monitor
out
AV1
in
75
⍀
VIDEO
L
AUDIO
R
S-VIDEO
Round 75Ω
3
Coaxial Cable
Jack Panel Back of TV
NOTE: Set the OUTPUT CHANNEL
SWITCH on the back of the cable box to
CH 3 or 4. Tune the TV to the same chan-
nel and change channels at the cable box.
6
CABLE BOX CONNECTIONS
3
Cable Box (w/Audio/Video Outputs):
This connection will supply Stereo sound.
Cable Signal IN
from the Cable
Company
Connect the Cable Company sup-
24
plied cable to the cable signal
IN(put) plug on the back of the
Cable Box.
1
1
Cable Box with A/V Outputs
OUTPUT
CH
3
4
Using a RCA type Video Cable, con-
L
R
CABLE
IN
TO
TV
VIDEO
OUT
AUDIO
OUT
nect one end of the cable to the
2
Video (or ANT, your cable box may
be labeled differently) Out jack on
the cable box and the other end to the
AV1 Video Input on the TV.
Audio Cables
L & R (Red, White)
Video Cable (Yellow)
2
AV1
in
Monitor
o
75 ⍀
VIDEO
Connect one end of the Audio Left
and Right Cable to the left and right
L
S-VIDEO
3
AUDIO
R
Audio Out L & R jacks on the
cable box. Connect the other end to
the AV1 Audio L & R Input jacks on
the TV.
3
Jack Panel Back of TV
NOTE: Use the Channel + or – buttons on
the TV remote control to tune to the AV1
channel for the cable box signal. Once
tuned, change channels at the cable box,
not the television.
Monitor
out
AV1
in
75
⍀
VIDEO
L
AUDIO
R
S-VIDEO
7
BASIC TV AND REMOTE OPERATION
4
Press the POWER button to
turn the TV ON.
Note: You can also press any
button on the front of the TV to
turn the TV ON.
1
Press the VOLUME + button to
increase the sound level, or the
VOLUME – button to lower the
sound level.
VIDEO
L
AUDIO
R
MENU
–
VOLUME
+
CHANNEL
2
Front of TV
VIDEO
L
AUDIO
R
MENU
–
VOLUME
+
CHANNEL
Pressing both buttons at the same
time will display the on-screen
menu. Once in the menu, use these
button to make adjustments or
selections.
1
2
3
Remote
Sensor Window
1
Press the CHANNEL UP or
DOWN button to select TV
channels.
3
REMOTE CONTROL
VOL
Point the remote control
toward the remote sensor win-
dow on the TV when operating
the TV with the remote.
4
o load the supplied batteries into the
Back of Remote
Tremote:
1. Remove the battery compartment
Battery Compartment
lid on the back of the remote.
2. Place the batteries (2-AA) in the
remote. Be sure the (+) and (-) ends of
the batteries line up correctly (inside of
case is marked.)
2-AA Batteries
Battery Lid
3. Reattach the battery lid.
8
AV1 AUDIO/VIDEO INPUT CONNECTION
5
he TV’s audio/video input jacks are for
Back of TV
Tdirect picture and sound connections
between the TV and a VCR (or similar
device) that has audio/video output jacks.
Follow the easy steps below to connect an
accessory device to the AV 1 Input Jacks
located on the back of the TV.
1
Monitor
out
V1
in
7
VIDEO
2
AUDIO
R
S-VIDEO
Connect the VIDEO (yellow) cable
to the VIDEO AV1 in jack on the back
of the TV.
1
Audio Cables
(Red & White)
Video Cable
(Yellow)
Connect the AUDIO (red and white)
ENNA
IN
cables to the AUDIO (left and right)
AV1 in jacks on the rear of the TV.
OUT
OUT
VIDEO
IN
2
R
AUDIO
L
ANTENNA
OUT
Connect the VIDEO (yellow) cable
3
IN
to the VIDEO OUT jack on the back
of the VCR.
4
3
Back of Typical VCR
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
4
Turn the VCR (accessory device)
5
7
and the TV ON.
VCR with
Audio/Video Outputs
5
Press the AV button on the remote
control to select the AV1 channel. AV1
will appear in the upper left corner on
the TV screen.
6
With the VCR (or accessory device)
ON and a prerecorded tape (CD,
DVD, etc.) inserted, press the PLAY
6
7
ꢀ
button to view the tape on the tele-
VOL
vision.
HELPFUL HINT
All the AV channels can be selected by
pressing the Channel + or – buttons.
The AV channels can also be added to
the QuadraSurf™ buttons for quick
access.
9
FRONT AUDIO/VIDEO INPUT CONNECTION
6
he TV also has Audio/Video Input Jacks
Headphone Jack
(will Mute the TV
speakers when in use)
Tlocated on the front of the TV cabinet
for easy and quick connections that might
not be permanent. This type of connection
might be useful for the playback of a tape
from a camera or a video gaming device.
Follow the easy steps below to connect an
accessory device to the Front Input Jacks.
INSTALL/MENU
VIDEO
L
AUDIO
R
–
VOLUME
+
CHANNEL
2
CHANNEL
Front Control Panel
Connect the VIDEO (yellow) cable
to the VIDEO in jack on the front of
the TV.
MENU
1
2
VIDEO
L
AUDIO
R
–
VOLUME
+
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) in jacks on the front of the
TV.
Audio Cables
(Red & White)
5
1
Video Cable
(Yellow)
4
Connect the VIDEO (yellow) cable
to the VIDEO OUT jack on the back
of the camera (or accessory device).
VIDEO
L
AUDIO
R
3
4
3
5
7
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear of
the camera (or accessory device).
External Accessory Device
(with Audio/Video Outputs)
Turn the camera (or accessory
device) and the TV ON.
5
Press the AV button on the remote
control to select the FRONT chan-
nel. FRONT will appear in the upper
left corner on the TV screen.
6
6
With the camera (or accessory
device) ON and a prerecorded tape
VOL
7
(CD, DVD, Game Card, etc.,
depending on type of accessory
device) inserted, press the PLAY ꢀ
button to view the tape on the
television.
10
S-VIDEO INPUT CONNECTION
7
he S(uper)-Video connection on the
Trear of the TV can provide you with
better picture detail and clarity for the
playback of accessory sources such as
DBS (digital broadcast satellite), DVD
(digital video discs), video games, and
S-VHS VCR (video cassette recorder)
tapes than the normal antenna picture
connections.
Monitor
out
AV1
in
75
⍀
VIDEO
L
AUDIO
R
S-VIDEO
Back of TV
1
Moor
out
AV
in
75 ⍀
VIDEO
NOTE: The accessory device must
have an S-VIDEO OUT(put) jack in
order for you to complete the connec-
tion on this page.
L
AUDIO
R
S-VIDEO
Audio Cables
S-Video
Cable
(Red & White)
Connect one end of the S-VIDEO
CABLE to the S-VIDEO jack on
1
the back of the TV. Then connect
one end the AUDIO (red and
white) CABLES to the AV1 in
AUDIO L and R(left and right)
jacks on the rear of the TV.
2
OUT
AUDIO
IN
OUT
S-VHS OUT
ANTENNA
IN
VIDEO
R
L
ANTENNA
OUT
IN
Connect other end of the S-
VIDEO CABLE to the S-VHS
2
(S-Video) OUT jack on the back
of the VCR. Then connect the
other ends of the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
5
3
VCR or External
Accessory Device
(with S-Video Output)
Turn the VCR and the TV ON.
3
4
Press the AV button on the
remote to scroll the channels until
4
VOL
SVHS appears in the upper left
corner of the TV screen.
Now your ready to place a prere-
corded video tape in the VCR and
5
press the PLAY ꢀ button
.
11
MONITOR OUTPUT CONNECTIONS
8
he Audio/Video (Monitor) Output jacks
AUDIO SYSTEM CONNECTION:
Tare great for recording with a VCR or
used to connect an external audio system
for better sound reproduction.
Back of TV
1
VIDEO
L
S-VIDEO
AUDIO
AUDIO SYSTEM CONNECTION:
R
Monitor
out
1
Connect one end of the R(ight) and
L(eft) AUDIO (Monitor Out) jacks
Audio Cables
(Red and White)
1
on the TV to the R and L audio input
jacks on your amplifier or sound sys-
tem. Set the television’s volume to a
normal listening level.
1
R
L
T
AUX/TV INPU
T
PHONO INPU
Turn the TV and audio system ON.
To adjust the volume on the audio
2
system, you will need to change
the volume at the external audio
system, not the television.
2
External Audio System
with Audio Outputs
12
MONITOR OUTPUT CONNECTIONS
9
SECONDVCR CONNECTION:
SECONDVCR CONNECTION:
NOTE: Refer to panel number 5 for the
proper hookup of the first VCR. Follow
the instructions on how to tune to the AV
1 channel to view a pre-recorded tape.
1
⍀
Back of TV
VIDEO
L
S-VIDEO
AUDIO
R
The following steps allow you to con-
nect a second VCR to record the pro-
gram while your watching it.
Monitor
out
AV1
in
Audio Cables
Video
Cable
Connect one end of the yellow
2
ANTENNA
IN
OUT
AUDIO
IN
OUT
VIDEO
IN
ANTENNA
IN
Video Cable to the Monitor Out
VIDEO
IN
O
AUDIO
IN
1
VIDEO plug. Connect the other end
to the VIDEO IN plug on the second
VCR.
R
L
ANTENNA
OUT
L
R
ANTENNA
OUT
Connect one end of the red and
white Audio cable from the Monitor
2
Out AUDIO L and R plugs on the
TV to the AUDIO IN plugs on the
VCR.
1st VCR
(refer to panel 3 for
proper connection)
3
2nd VCR with Audio and
Video Input Jacks
Turn the Second VCR ON, insert
a black VHS tape and it’s ready to
record what’s being viewed on the
TV screen.
3
13
REMOTE CONTROL BUTTON DESCRIPTIONS
10
1 - POWER button - Press the Power button
11 - STATUS/EXIT Button - Press to dis-
play the current channel number. If the on-
screen menu is displayed, press the Status/Exit
button to remove it from the TV’s screen.
to turn the TV on or off.
2 - QUADRA SURF Buttons - (Red,
Green, Yellow, Blue) Allows you to store and
surf up to 10 channels for each colored button.
12 - CURSOR , , , or Buttons -
Press to navigate, select and adjust controls
3 - SMILEY Button - Press to add channels
in the “Quadra Surf” lists. Works with all col-
ored buttons.
within the on-screen menu. Also use the
CURSOR UP or DOWN to activate or
deactivate the EXPAND 4:3 screen format-
ting control.
4 - FROWNIE Button - Allows you to
delete stored channels within the “Quadra Surf”
lists for the colored buttons.
13 - VOL(ume) + or – Buttons - Press the
VOL + button to increase the TV’s sound level.
Press the VOL – button to decrease the TV’s
sound level.
5 - AV Button - Press to select an accessory
signal from the front AV Inputs.
6 - A/CH Button - (Alternate Channel)
Press to toggle between the last viewed channel
and the channel presently being viewed.
14 - CH(annel) + or – Buttons - Press to
select channels in ascending or descending
order.
7 - AUTO SOUND Button - Press repeat-
edly to choose from 4 different factory pre-
defined sound settings. Choose from Personal
(how you set the Sound Menu options), Voice
(for programming with speaking only), Music
(for musical type programs such as concerts),
or Theatre (used when watching movies).
15 - MUTE Button - Press the mute button to
eliminate the sound being heard from the TV.
“MUTE” will be displayed on the TV’s screen.
Press again to restore the TV’s volume to its’
previous level.
16 - NUMBERED (0-9) Buttons - Press the
numbered buttons to select TV channels or to
enter certain values within the on-screen menu.
For single channel entries, press the numbered
button for the channel you desire. The TV will
pause for a second or two before changing to
the chosen channel.
8 - AUTO PICTURE Button - Press repeat-
edly to choose from 5 different factory pre-
defined picture settings. Choose from Personal
(how you set the Picture Menu adjustment con-
trols), Movies (when watching movies), Sports
(for any sporting event), Weak Signal (used
when the signal being received is not the best),
or Multimedia (for use with video gaming).
17 - SLEEP Button - Press the Sleep button
to set the TV to automatically turn itself off
after a set period of time. Press repeatedly to
select 15, 30, 45, 60, 90, 120, 180, or 240 min-
utes.
9 - CC Button - Press to activate the Closed
Captioning options. Repeatedly pressing the
CC button will scroll the options available on
the TV screen.
18 - NOTE: This button is dedicated to
TIMER features within certain TV models.
This TV does not contain these TIMER fea-
tures, therefore the button will have no func-
tionality when pressed.
10 - MENU Button - Press to display the on-
screen menu. Also can be used to back out of
the on-screen menu until it disappears from the
TV’s screen.
14
REMOTE CONTROL BUTTONS
11
1
2
5
6
4
3
7
8
9
11
12
10
13
14
VOL
15
16
17
18
15
HOW TO NAVIGATE THE ONSCREEN MENU
12
eatures for your television can be
Fadjusted from within a MENU shown
on the TV’s screen. A MENU is nothing
more than an onscreen list of features.
Some of the features have sub-menus but
each MENU item can be adjusted or acti-
vated (deactivated) by viewing the screen
and simply pressing the proper button.
Main
Picture
Main
Picture
Treble
Brightness
Color
Sound
Features
Install
Bass
Sound
Features
Install
Balance
AVL
Picture
Sharpness
Color Temp
Conrast+
Incr. Surround
More...
Sound Menu
Picture Menu
Press the MENU button on the
remote control to show the onscreen
menu.
1
Main
Main
Picture
Sound
Features
Install
Picture
Sound
Features
Install
AutoLock
Format
Language
Tuner Mode
Auto Program
Channel Edit
Press the CURSOR UP
or
DOWN buttons on the remote to
pick any of the onscreen menus.
2
3
4
5
Press the CURSOR RIGHT
button on the remote control show
the selected menu’s controls.
Install Menu
Features Menu
Press the CURSOR UP
or
DOWN buttons on the remote to
pick any of the displayed controls.
2
4
1
5
Press the CURSOR RIGHT or
CURSOR LEFT
button on the
remote control to make selections
or adjustments to the selected con-
trols.
6
VOL
Press the STATUS/EXIT button
on the remote to clear the menu
from the screen after an adjustment.
6
3
5
2
4
You can also just wait a few sec-
onds after you finish the feature
adjustment and the menu will disap-
pear from the screen automatically.
16
THE INSTALL MENU CONTROLS
13
our TV has several controls to help
Ywith the first-time setup. These con-
trols are found within the INSTALL
onscreen sub menu.
Install
Language
English
Tuner Mode
Auto Program
Channel Edit
LANGUAGE CONTROL - For our
Spanish and French speaking TV
1
owners an onscreen LANGUAGE
Control is present. This control can
set the TV’s onscreen menu to be
shown in either English, Spanish or
French.
English
Language
TUNER MODE CONTROL -
This control changes the TV’s sig-
or Espanol
or Francias
2
nal input to either ANTENNA,
CABLE, or AUTO mode. In the
AUTO mode, when the AUTO
PROGRAM feature is activated, the
TV will automatically choose the
correct mode.
Antenna
or Cable
or Auto
Tuner Mode
Auto Program
Channel
12
AUTOPROGRAM CONTROL -
Your TV can automatically set itself
3
Channel Edit
Channel No.
Skipped
for local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your
area when the CHANNEL (+), (–)
buttons are pressed. Make sure the
antenna or cable signal connection
has been completed before AUTO
PROGRAM is activated.
12
Channel Edit
Program No.
Skipped
On
or Off
CHANNEL EDIT CONTROL -
Allows you to ADD or DELETE spe-
cific channels to the TV’s memory.
4
17
THE PICTURE MENU CONTROLS
14
o adjust your TV picture controls,
Tselect a channel and use the Picture
Menu Controls listed below:
Picture
Brightness
BRIGHTNESS CONTROL -
50
Press the CURSOR RIGHT or
1
LEFT buttons until darkest parts
of the picture are as bright as you pre-
fer.
Color
Picture
Sharpness
Tint
COLOR CONTROL - Press the
CURSOR RIGHT or LEFT
Color Temp.
2
buttons to add or eliminate color.
PICTURE CONTROL - CUR-
SOR RIGHT
or LEFT
but-
3
4
4
5
tons until lightest parts of the picture
show good detail.
Brightness
65
50
50
50
SHARPNESS CONTROL - Press
Color
the CURSOR RIGHT
or LEFT
buttons to improve detail in the
picture.
Picture
TINT CONTROL - Press the
CURSOR RIGHT or LEFT
buttons to obtain natural skin
tones.
Sharpness
Tint
0
COLOR TEMP CONTROL -
Press the CURSOR RIGHT
or
LEFT
buttons to select NOR-
Color Temp.
Normal
MAL, COOL, or WARM picture pref-
erences. (NORMAL will keep the
whites, white; COOL will make the
whites, bluish; and WARM will make
the whites, reddish.)
Warm
or
Cool
On
Off
CONTRAST + CONTROL -
Contrast +
Press the CURSOR RIGHT
or
6
LEFT
buttons to toggle the con-
trol On or OFF. The Contrast + con-
trol helps to “sharpen” the picture
quality. The black portions of the pic-
ture become richer in darkness and the
whites become brighter.
18
THE SOUND MENU CONTROLS
15
o adjust your TV sound, select and use
Tthe Sound Menu Controls listed below:
TREBLE: Press the CURSOR
Main
Picture
LEFT
or RIGHT
buttons to
1
2
3
4
Treble
adjust the control. The control will
enhance the high frequency sounds.
Bass
Sound
Features
Install
Balance
AVL
BASS: Press the CURSOR LEFT
or RIGHT
buttons to adjust
Incr. Surround
More...
the control. The control will enhance
the low frequency sounds.
BALANCE: Press the CURSOR
LEFT or RIGHT
buttons to
adjust the level of sound coming from
the left and right speakers.
50
50
R
Treble
AVL: (Auto Volume Leveler) Press
the CURSOR LEFT or RIGHT
buttons to turn the control On or
Off. When On, AVL will level out the
sound being heard when sudden
changes in volume occur during com-
mercial breaks or channel changes.
Bass
Balance
AVL
L
INCR. SURROUND: Press the
On
CURSOR LEFT
or RIGHT
5
buttons to select between Incr.
Surround or Stereo settings (If
Stereo), or select Spatial or Mono (If
Mono).
or Off
Incr. Surround
Incr. Surround
Spatial
ULTRA BASS: Press the CURSOR
or Mono
LEFT
or RIGHT
buttons to
6
7
turn Ultra Bass On or Off. Ultra Bass
will enhance the low frequency
sound.
Incr. Surround
or Stereo
SOUND: Press the CURSOR LEFT
or RIGHT
buttons to select
On
Ultra Bass
Sound
between Stereo or Mono settings.
Note: If Stereo is not present on a
selected show and the TV is placed in
the Stereo mode, the sound coming
from the TV will remain in the Mono
mode.
or Off
Mono
or Stereo
19
THE 4:3 EXPAND FORMAT CONTROL
16
any times while watching movies
Mfrom a DVD player the image is
shown in “letter box” format. This is the
format that is shown in movie theaters.
when shown on a TV screen, the image
will have areas of black on top and bot-
tom of the screen.
Features
AutoLock
Format
4:3
Press the MENU button on the
remote to display the on-screen
menu.
1
Press the CURSOR DOWN
button until the word Features is
highlighted.
2
Format
4:3 Expand
Press the CURSOR RIGHT
button to display the Features
menu options (AutoLock or
Format).
3
Press the CURSOR DOWN
button until the word Format is
highlighted.
4
Press the CURSOR RIGHT
or
4:3
Expand 4:3
LEFT buttons to select one of
the two options 4:3 or Expand 4:3.
4:3 - Standard format for the TV.
Expand 4:3 - Enlarges the picture
to fill out the entire screen area,
eliminating the “letter box” effect.
5
1
5
6
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
6
Note: The Expand 4:3 format can also
be activated using the CURSOR UP
or DOWN buttons when the
onscreen menu is not being displayed.
Pressing these buttons will toggle the
standard 4:3 format and the Expand 4:3
format.
OL
3
5
2
4
20
UNDERSTANDING THE AUTOLOCK™ FEATURE
17
MOVIE RATINGS Continued
he AutoLock™ feature is an integrated
Tcircuit that receives and processes data
sent by broadcasters, or other program
providers, that contain program content advi-
sories. When programmed by the viewer, a
TV with AutoLock™ can respond to the con-
tent advisories and block program content
that may be found objectionable (such as
offensive language, violence, sexual situa-
tions, etc.). This is a great feature to censor
the type of viewing children may watch.
R: Restricted - This is programming is specif-
ically designed for adults. Anyone under the
age of 17 should only view this programming
with an accompanying parent or adult guardian.
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only.
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intensely
suggestive language.
AutoLock™ offers various BLOCKING
controls from which to choose:
Access Code - An Access Code must be
set to prevent children from unblocking ques-
tionable or censored programming set by
their parents.
TV RATINGS
TV-Y -- Designed for a very young audience,
including children ages 2-6.
TV-Y7 --It may be appropriate for children
age 7 and above who have acquired the devel-
opment skills needed to distinguish between
make-believe and reality.
Channel Block - After an access code has
been programmed, you can block individual
channels including the A/V inputs.
TV-G -- Suitable for most audiences, this type
of programming contains little or no violence,
no strong language, and little or no sexual dia-
logue or situations.
TV-PG -- This program contains material that
parents may find unsuitable for younger chil-
dren. Could contain Moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialogue (D).
Clear All - Allows you clear all channels
being blocked from your viewing set with the
Channel Block Control.
Block All - Allows you to block ALL chan-
nels and A/V inputs at one time.
Movie Ratings - Certain blocking options
exist which will block programming based
on ratings patterned by the Motion Pictures
Association of America.
TV-14 -- This program contains some material
that many parents would find unsuitable for
children under 14 years of age. This type of
programming contains one or more of the fol-
lowing: intense violence (V), intense sexual sit-
uations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
MOVIE RATINGS
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages.
PG: Parental Guidance Suggested -
This programming contains material that par-
ents may find unsuitable for younger children.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the age
of 13.
TV-MA -- This program is specifically
designed to be viewed by adults and therefore
may be unsuitable for children under 17. This
type of programming contains one or more of
the following: graphic violence (V), explicit
sexual situations (S), or crude indecent lan-
guage (L).
21
CREATING AN ACCESS CODE FOR AUTOLOCK™
18
ver the next few panels you’ll learn
Ohow to block channels and get a better
understanding of the rating terms for cer-
tain programming.
Features
AutoLock
Format
Main
Picture
Timer
AutoLock
Format
Start Time
Stop Time
Channel
Activate
Display
Sound
Features
Install
First, let’s start by learning how to set a
personal access code:
Press the MENU button on the
remote to display the on-screen menu.
1
Features
AutoLock
Format
Features
AutoLock
Format
Access Code
- - - -
Access Code
XXXX
Press te CURSOR UP
or DOWN
button until the word FEATURES
2
3
4
5
6
is highlighted.
Press the CURSOR RIGHT
button to display the FEATURES
menu options.
Features
AutoLock
Format
Features
AutoLock
Format
Access Code
XXXX
New Code
- - - -
Press the CURSOR UP
DOWN button until the words
AUTOLOCK™ are highlighted.
or
Incorrect
Press the CURSOR RIGHT
button. The screen will read,
“ACCESS CODE - - - - .”
Features
AutoLock
Format
AutoLock
Confirm Code
XXXX
Block Channel
Setup Code
Clear All
OffStop Time
Channel
Activate
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX” appears on
the Access Code screen as you press
the numbered buttons.
Block All
Movie Rating
TV Rating
Display
“INCORRECT CODE” will appear
on the screen, and you will need to
enter 0, 7, 1, 1 again.
2
4
1
The screen will ask you to enter a
“New Code.” Enter a “new” 4 digit
code using the NUMBERED but-
tons. The screen will then ask you to
CONFIRM the code you just entered.
Enter your new code again.
“XXXX” will appear when you enter
your new code and then display the
AutoLock™ menu options.
7
3
5
6
7
2
4
Proceed to the next panel to learn more...
22
HOW TO BLOCK CHANNELS WITH AUTOLOCK™
19
fter your personal access code has
Abeen set (see previous page), you are
now ready to select the channels or the A/V
Inputs you want to block out or censor.
Once you’ve entered your access code
and the AutoLock™ features are dis-
played on the screen:
AutoLock
Block Channel OffStop Time
Setup Code
Clear All
Channel
Activate
Display
Block All
Movie Rating
TV Rating
Press the CURSOR UP
DOWN buttons until the words
or
1
2
3
4
BLOCK CHANNELS are high-
lighted.
Press the CURSOR RIGHT
Block Channel On
button to turn blocking ON or OFF
for that channel. When ON is select-
ed the channel will be blocked.
Channel 12
Enter your
Access Code to
view a tuned
channel that is
blocked with
Block Channel.
Press the CH + or CH – button to
select other channels you wish to
block. Repeat step 9 to block the
new channel.
Blocked By AutoLock
Channel Blocking
Access Code
- - - -
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
NOTE: If you ever forget your code, the
0, 7, 1, 1 code is the factory default and
can be used to enter and create a new
access code.
1
4
2
3
1
23
BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME
20
fter blocking specific channels there
Amay come a time when you want to
block or clear all the channels at the
same time.
Once you’ve entered your access code
and the AutoLock™ features are dis-
played on the screen:
AutoLock
Block Channel
Setup Code
Clear All
Clear ?Stop Time
Channel
Block All
Movie Rating
TV Rating
Activate
Press the CURSOR UP
DOWN buttons to select either
or
Display
1
2
CLEAR ALL or BLOCK ALL.
If CLEAR ALL is selected, press
the CURSOR RIGHT
button
Cleared
Clear All
to clear all blocked channels. All
channels will be viewable.
If BLOCK ALL is selected, press
AutoLock
the CURSOR RIGHT
button
Block Channel
Setup Code
Clear All
to turn the control ON or OFF.
When ON is selected, ALL avail-
able channels will be blocked from
viewing.
Off
Block All
Movie Rating
TV Rating
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
3
Block All
On
NOTE: If you ever forget your code, the
0, 7, 1, 1 code is the factory default and
can be used to enter and create a new
access code.
1
3
2
1
24
BLOCK PROGRAMS BASED ON MOVIE RATINGS
21
he AutoLock™ feature can block
Tprogramming based on the Movie
Industry ratings.
AutoLock
Once you’ve entered your access code
and the AutoLock™ features are dis-
played on the screen:
Block Channel
Setup Code
Clear All
G
PG
PG-13
R
Block All
Movie Rating
TV Rating
NC-17
X
Press the CURSOR UP or
DOWN button to highlight the
words MOVIE RATING.
1
Press the CURSOR RIGHT
button to display the MOVIE
RATING options (G, PG, PG-13, R,
NC17, or X).
2
Movie Rating
G
Off
PG
PG-13
R
Press the CURSOR UP
or
NC-17
X
DOWN button to highlight any
3
of the Movie Rating options. When
highlighted, all these options can be
turned ON (which will allow block-
ing) or OFF (which will allow view-
ing).
G
On
Use the CURSOR RIGHT
but-
ton on the remote to turn the rating
option ON or OFF.
4
1
3
When a rating level is chosen to be
blocked, any higher level rating will also
be blocked from viewing. (i.e.: If “R” is
selected to be blocked, NC-17 and X will
automatically be blocked.)
2
4
1
3
NOTE: If you ever forget your code, the
0, 7, 1, 1 code is the factory default and
can be used to enter and create a new
access code.
25
BLOCK PROGRAMS BASED ON TV RATINGS
22
he AutoLock™ feature can block pro-
Tgramming based on the TV Industry rat-
ings.
TV Rating
TV-Y
Once you’ve entered your access code and
the AutoLock™ features are displayed on the
screen:
Off
TV-Y7
TV-G
TV-PG
TV-14
Press the CURSOR UP
button to highlight the words TV
RATING.
or DOWN
1
2
TV-MA
Press the CURSOR RIGHT
but-
ton to display the TV RATING options
(TV-Y, TV-Y7, TV-G, TV-PG, TV-
14, or TV-MA).
On
TV-Y
Block All, FV
TV-Y7
TV-G
Press the CURSOR UP
or DOWN
Off
button to highlight any of the TV
Rating options. When highlighted, all
these options can be turned ON (which
will allow blocking) or OFF (which will
allow viewing).
3
Block All, V, S, L, D
TV-PG
TV-14
Block All, V, S, L, D
Block All, V, S, L
NOTE: Some TV RATING options also
have sub-ratings. The ratings of TV-Y7, TV-
PG, TV-14, TV-MA can be customized to
block V (violence), FV (fantasy violence), S
(sexual situations), L (coarse language), or D
(suggestive dialogue).
TV-MA
1
3
5
Press the CURSOR RIGHT
ton on the remote to turn the TV-Y or
TV-G rating ON or OFF. Or, press the
but-
4
CURSOR RIGHT
button to enter
the sub-menus for the TV-Y7, TV-PG,
TV-14 or TV-MA ratings.
2
4
6
1
If the TV-Y7, TV-PG, TV-14 or TV-MA
sub-menu is accessed, press the CUR-
L
3
5
5
6
SOR UP
or CURSOR DOWN
button to select one of the options
(Block All, V, S, L, D, or FV).
Press the CURSOR RIGHT
button on the remote to turn the
option ON or OFF.
26
OTHER AUTOLOCK™ BLOCKING OPTIONS
23
utoLock™ offers the viewer other
Ablocking features as well. With these
Blocking Options, the censoring can be
turned ON or OFF.
Once you’ve entered your access code
and the AutoLock™ features are dis-
played on the screen:
AutoLock
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Block Options
Press the CURSOR UP
or
DOWN buttons until the words
BLOCKING OPTIONS are high-
lighted.
1
2
On
On
On
Blocking
Press the CURSOR RIGHT
button to display the Blocking
Options (BLOCKING, UNRAT-
ED, or NO RATING) menu.
Unrated
No Rating
BLOCKING: Might be called the “mas-
ter switch” for AutoLock™. When ON,
ALL blocking/censoring will take place.
When OFF, ALL blocking is disabled.
1
3
UNRATED: ALL unrated programs
based on the Movie Ratings or Parental
(TV) Guidelines can be blocked if this
feature is set to ON and the BLOCKING
feature is set to OFF.
4
NO RATING: ALL programming with
NO content advisory data can be blocked
if set to ON and the BLOCKING feature
is set to OFF.
2
4
1
3
Press the CURSOR UP
or
DOWN buttons to highlight
the desired feature.
3
4
When highlighted, each feature can
be turned ON or OFF using the
CURSOR RIGHT
or LEFT
buttons on the remote.
27
USING THE CLOSED CAPTION CONTROL
24
losed Captioning (CC) allows you to
Cread the voice content of television
programs on the TV screen. Designed to
help the hearing impaired, this feature
uses on-screen “text boxes” to show dia-
logue and conversations while the TV
program is in progress.
CC Off
Press the CC button on the remote to
display the current Closed Caption
setting.
1
CC Off
CC1
Press the CC button repeatedly to
choose from the four Closed Caption
options (CC Off, CC1, CC2, CC
Mute).
2
CC2
3
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
CC Mute
3
1
2
VOL
28
USING THE SLEEPTIMER CONTROL
25
our TV can be set to automatically
turn itsef off at a given amount of
Y
time.
Press the SLEEP button on the
remote control and the SLEEP timer
display will apprear on the screen.
1
2
Sleep 15
Press theSLEEP button repeatedly
to pick the amount of time (15, 30,
45, 60, 90, 120, 180, or 240 minutes)
before the TV will turn itself off.
Sleep 15
Sleep 30
Sleep 45
Sleep 60
Sleep 90
Sleep 120
Sleep 180
Sleep 240
Sleep off
NOTE: An on-screen count down will
appear during the last minute before the
TV shuts itself off. If any button is
pressed during the last minute of the
countdown , the Sleeptimer setting will be
cancelled.
VOL
1
2
29
USING THE AUTOPICTURE™ CONTROL
26
hether you’re watching a movie or
Wa sporting event, your TV has auto-
matic video control settings matched for
your current program source or content.
Press the AUTO PICTURE button
on the remote control. The current
Auto Picture setting will be displayed
on the screen.
1
Personal
Press the AUTO PICTURE button
repeatedly to select either PER-
SONAL, MOVIES, SPORTS,
WEAK SIGNAL, or MULTIMEDIA
picture settings.
2
Movies
Sports
NOTE: The way you choose to set the
Picture Menu Controls will become your
PERSONAL setting.
Weak Signal
Multimedia
MOVIES - Preset picture options for watching
1
2
Video Tapes, or DVDs.
VOL
SPORTS - Preset picture options for watching
sporting events.
WEAK SIGNAL - Preset picture options for
watching programs where the reception is not
at its best.
MULTIMEDIA - Preset picture options for
use with video gaming.
30
USING THE AUTOSOUND™ CONTROL
27
he Auto Sound feature allows the lis-
Ttener to select between four different
factory set sound options.
Press the AUTO SOUND button
on the remote control. The current
Auto Sound setting will appear in the
middle of the screen.
1
Personal
Press the AUTO SOUND button
repeatedly to toggle between the
four settings. (PERSONAL, THE-
ATRE, MUSIC, or VOICE)
2
Theatre
Music
Voice
NOTE: The way you choose to set the
Sound Menu Controls will become your
PERSONAL setting.
1
2
THEATRE - Preset sound options for
watching movies.
VOL
MUSIC - Preset sound options for musical
programming where there is little dialogue.
VOICE - Preset sound options for program-
ming where heavy dialogue is present.
31
HOW TO USE THE QUADRASURF™ BUTTONS
28
he QuadraSurf™ control allows you
Tset up four different personal channel
Surf lists using the colored buttons (on
the remote control), each holding up to
ten channels in its quick viewing“list.”
12
Press the CHANNEL (+) or (–) but-
tons (or the NUMBER buttons) to
select a channel to add to one of the
SURF lists.
Select List!
Added!
12
1
12
Press the SMILEY
button on
the remote control to ADD the chan-
nel to one of the SURF lists.
2
3
Press the corresponding COL-
ORED (Red, Green, Yellow or Blue)
button to add the channel to that but-
ton’s Surf list. (Up to ten channels per
button can be stored.)
12
Remove Item? - Press
Repeat steps 1 through 3 to add addition-
al channels (up to 10) to each of the the
SURF lists.
12
To remove a channel from one of the
SURF lists;
Press the COLORED Quadra
Surf button until the desired chan-
4
3
4
nel appears. The screen will display
the channel number with a colored
“Smiley” face to indicate the
Colored button it relates to.
While the “Smiley” face channel
indicator is displayed, press the
2
5
6
5
VOL
FROWNIE
screen will read, “Remove item? -
Press .”
face button. The
1
Press the FROWNIE
face but-
ton again to confirm your decision
to remove the channel from the Surf
list.
6
Repeat steps 4-6 to remove other chan-
nels from Surf lists.
32
HOW TO USE THE QUADRASURF™ BUTTONS
29
he QuadraSurf™ buttons on your
Tremote control allow you to store up to
10 channels per button (40 total). This is a
great feature if you want to store all your
favorite Sports channels, Movie channels,
or News channels in one surf list. Family
members can have there own favorite list
of channels. You can even program the
external A/V Input jacks (Front channel)
for one of the buttons making it a
12
10
99
18
22
“source” button for your external acces-
sory devices.
56
Assuming channels have now been added
to the four Quadra Surf lists (the four col-
ored buttons, see the previous page), let’s
review how the feature works.
41
28
Press one of the pre-programmed
35
COLORED buttons on the remote
39
1
(Red, Green, Yellow or Blue). The
screen will display a smiley face with
the first programmed channel for that
surf list.
While the colored “smiley” face still
appears on the screen, press the
1
2
3
2
same COLORED button on the
5
remote to tune the second channel
programmed for that specific surf list.
Repeatedly pressing the same COL-
VOL
ORED button while the “smiley”
3
face appears will tune all the pro-
grammed channels. Pressing the COL-
ORED button again will return you to
the first channel in the list.
If the “smiley” face disappears from the
screen and the same COLORED button is
pressed, the surf channels will be displayed
starting with the FIRST programmed chan-
nel again.
5
Repeat steps 1-3 for the other three
COLORED buttons (Surf lists) if
12
Remove Item? - Press
4
5
desired.
Any time the “smiley” face appears
with the channel number, pressing
the “frownie” face button will allow
you to remove it from the list (see the
previous page for more details).
33
FACTORY SERVICE LOCATIONS
30
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on
back), you can contact the nearest Service Branch to obtain efficient and expedient repair for
your product. If your product is In-Warranty, you should have proof-of-purchase to ensure
No Charge Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après
vente du fabricant Philips (voir liste ci-dessous), vous pourrez contacter la branche de serv-
ice après vente la plus près de chez vous pour obtenir un service après vente rapide et effi-
cace. Si le produit est sous garantie, il suffira de présenter une preuve d`achat pour béné-
ficier d'un service sans frais. Pour les produits non couverts par la garantie, contactez le
centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábri-
ca (ver directorio más abajo), Ud. puede comunicarse con la sucursal de servicio más cer-
cana para obtener una reparación oportuna y eficaz de su producto. Si su producto está
todavía bajo garantía, Ud. debe presentar comprobante de compra para no ocasionar
ningunos cargos por servicio. Para servicio después del vencimiento de la garantía, llame al
lugar más cercano de los abajo indicados.
In Canada: How you can obtain efficient and expedient carry-in, mail-in, or in-home service
for your product. Please contact Philips at: 1-800-661-6162 (French speaking)
1-800-363-7278 (English or Spanish speaking)
Au Canada: Comment obtenir le service après-vente pour les produits apportés ou envoyés
par la poste à notre centre de service ou le service à domicile.
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278 (Anglais ou Espagnol)
En el Canadá: Cómo recibir servicio efficiente para su producto, en persona, por correo o a
domicillo. Favor de comunicarse con Philips al: 1-800-661-6162 (francófono)
1-800-363-7278 (Inglés o Español)
34
FACTORY SERVICE LOCATIONS
31
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW
FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR
IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY
SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE
PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES DE RÉCEPTION DE PRODUITS À RÉPARER À
TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EM-
PLACEMENT DE CES DÉPÔTS DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A
TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR TODO EL PAIS PARA LA RECEPCION DE PRO-
DUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO
PARA ESTOS LUGARES DENTRO DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
ATLANTA
CLEVELAND
KNOXVILLE
Philips Factory Service
550 Franklin Road.,
Suite F
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH
44131
Philips Factory Service
One Philips Drive
Knoxville, TN 37914
800-821-1767
Marietta, GA 30067
800-273-1501
800-331-7037
PHILADELPHIA
TAMPA
DETROIT
Philips Factory Service
352 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
Philips Factory Service
1911 US Highway 301
North, Suite 100
Tampa, FL 33619
800-442-2027
Philips Factory Service
25173 Dequindre
Madison Heights, MI
48071
LOS ANGELES
800-438-1398
Philips Factory Service
20930 Bonita, Ste. V
Carson, CA 90746
800-300-9013
SAN FRANCISCO
DALLAS
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
Philips Factory Service
415 N. Main Street,
#107
Euless, TX 76040
800-952-3254
HOUSTON
Philips Factory Service
1110 N. Post Oak Rd.,
Suite 100
CHICAGO
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
Houston, TX 77055
800-952-3254
35
LIMITED WARRANTY
32
COLOR TELEVISION - 90 Days Free Labor, OneYear Free Replacement of Parts
(TwoYears Free Replacement on Color Picture Tube) Must be carried in for service.
WHO IS COVERED?
Philips Consumer Electronics Company does not dis-
tribute the product, the local Philips service organiza-
tion will attempt to provide service (although there
may be a delay if the appropriate spare parts and
technical manual(s) are not readily available).
You must have proof of purchase to receive warranty
service. A sales receipt or other document showing
that you purchased the product is considered proof
of purchase.
WHAT IS COVERED?
MAKE SUREYOU KEEP...
Warranty coverage begins the day you buy your
product. For 90 days thereafter, all parts will be
repaired or replaced free, and labor is free. From 90
days to one year from the day of purchase, all parts
will be repaired or replaced free, but you pay for all
labor charges. From one to two years from the day
of purchase, you pay for the replacement or repair of
all parts except the picture tube, and for all labor
charges.After two years from the day of purchase,
you pay for the replacement or repair of all parts,
and for all labor charges.
Please keep your sales receipt or other document
showing proof of purchase. Attach it to this owner’s
manual and keep both nearby. Also keep the original
box and packing material in case you need to return
your product.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting
service.Adjustments of the controls discussed there
may save you a service call.
TO GETWARRANTY SERVICE IN U.S.A.,
PUERTO RICO OR U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see
enclosed list) or authorized service center to
arrange repair.
All parts, including repaired and replaced parts, are
covered only for the original warranty period. When
the warranty on the product expires, the warranty
on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all
implied warranties, including implied warranties of
merchantability and fitness for a particular purpose,
are limited in duration to the duration of this
express warranty. But, because some states do not
allow limitations on how long an implied warranty
may last, this limitation may not apply to you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the
product, adjustment of customer controls on the
product, and installation or repair of antenna sys-
tems outside of the product.
product repair and/or part replacement because
of misuse, accident, unauthorized repair or other
cause not within the control of Philips Consumer
Electronics Company.
•
WARRANTY COVERAGE IN CANADA...
Note: ProductWarranty coverage may vary between
countries where product is distributed by Philips
Consumer Electronics Company. In order to receive
full and specific warranty details for products sold
and serviced in Canada, please contact Philips at:
•
•
reception problems caused by signal conditions
or cable or antenna systems outside the unit.
a product that requires modification or adapta-
tion to enable it to operate in any country other
than the country for which it was designed, man-
ufactured, approved and/or authorized, or repair
of products damaged by these modifications.
incidental or consequential damages resulting
from the product. (Some states do not allow the
exclusion of incidental or consequential damages,
so the above exclusion may not apply to you.
This includes, but is not limited to, prerecorded
material, whether copyrighted or not copyright-
ed.)
1-800-661-6162 (French Speaking)
1-800-531-0039 (English and Spanish Speaking)
•
REMEMBER...
Please record the model and serial numbers found
on the product below. Also, please fill out and mail
your warranty registration card promptly. It will be
easier for us to notify you if necessary.
This warranty gives you specific legal rights. You may have
other rights which vary from state/province to state/province.
• a product used for commercial or institutional
purposes.
Philips, P.O. Box 520890
Miami, FL 33152
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where
the product is officially distributed by Philips
Consumer Electronics Company. In countries where
(402) 536-4171
36
|