NEC MultiSync JC 1941UMA User Manual

NEC Enterprise Series  
®
®
MultiSync  
E
900  
User’s Manual  
User’s Manual  
Contents  
Quick Start  
Controls  
1
2-3  
4-5  
Recommended Use 6-7  
Specifications  
Features  
8
9
Troubleshooting  
References  
Limited Warranty  
10  
11  
12  
Untitled-1  
1
6/15/98, 1:24 PM  
                                            
                                             
                                               
                                                                      
                                                                        
                                                                          
                                                                           
                                                                            
                                                                              
                                                                                
                                                                                  
                                                                                    
                                                                                      
                                                                                       
                                                                                         
®
Contents  
Your new NEC Technologies MultiSync® E Series monitor box*  
should contain the following:  
• MultiSync E900(JC-1941UMA) Monitor with tilt/swivel base  
• Power Cord  
• Captive Signal Cable  
• User’s Manual  
• Registration Card  
Power Cord  
Captive Signal Cable  
NEC Advanced S  
NEC Per  
THAK fYorOU FOR  
CHOOSIG mAaNnce NEC  
Series  
er  
i
MultiSync  
es  
TION  
MultiSync  
To help us in our continuing e©ffMortsOtoNITOR  
better serve and support you, and to bring  
— Important —  
you new and innovative products, please  
take a few moments to register your new  
NEC MultiSync monitor.  
E
User’s 9Ma0nu0al  
®
By returning this card, we confirm your  
date of purchase and records the model  
and serial numbers. This facilitates our  
ability to process warranty claims,  
especially if your original proof of  
purchase is lost.  
Thank you for your time and for choosing  
an NEC MultiSync monitor.  
PRODUCT REGISTRA  
SEE, HEAR AND FEEL THE DIFFERENCE.  
Users Manual  
Registration Card  
* Remember to save your original box  
and packing material to transport  
or ship the monitor.  
Note: You can now register your  
product on the Internet at  
1
Untitled-1  
3
6/15/98, 1:24 PM  
Quick Start  
To attach the MultiSync® E900monitor to your system, follow these  
instructions:  
1. Turn off the power to your computer.  
2. If necessary, install the display card into your system. For more information,  
refer to the display card manual.  
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the  
connector of the display card in your system (Figure A.1). Tighten all screws.  
For the Mac: Connect the MultiSync E900 Macintosh cable adapter (not  
included) to the monitor connector on the Macintosh (Figure B.1). Attach the  
15-pin mini D-SUB end of the captive signal cable to the MultiSync E900  
Macintosh cable adapter on the computer (Figure B.1). Tighten all screws.  
NOTE: To obtain the MultiSync E900 Macintosh cable adapter, call  
NEC Technologies at (800) 820-1230.  
4. Connect one end of the power cord to the MultiSync E900 monitor and the  
other end to the power outlet (Figure C.1).  
5. Turn on the monitor (Figure D.1) and the computer.  
NOTE: If you have any problems, please refer to the Troubleshooting section of  
this User’s Manual.  
Captive Signal Cable  
15-pin mini D-SUB  
Figure A.1  
2
Untitled-1  
4
6/15/98, 1:24 PM  
Quick Start  
Captive Signal  
Cable  
Mac Adapter  
(Not included)  
15-pin mini D-SUB  
Computer  
Figure B.1  
Power Outlet  
Power  
Cord  
Figure C.1  
MultiSync E900  
EXIT  
PROCEED RESET  
CONTROL  
Figure D.1  
3
Untitled-1  
5
6/15/98, 1:24 PM  
Controls  
OSM(On-Screen Manager) control buttons on the front of the monitor function  
as follows:  
EXIT  
Exits the OSM controls.  
CONTROL / Moves the highlighted area left/right to select one of the controls.  
CONTROL +/–  
Moves the bar in the + or – direction to increase or decrease  
the adjustment.  
PROCEED  
RESET  
Enters OSM menu and selects icons at the top of the menu.  
Resets the highlighted control to the factory setting.  
Brightness/Contrast Controls  
Adjusts the overall image and background screen brightness.  
Adjusts the image brightness in relation to the background.  
Size and Position Controls  
Moves the image horizontally (left or right).  
Moves the image vertically (up or down).  
Increases or decreases the horizontal size of the image.  
Increases or decreases the vertical size of the image.  
Geometry Controls  
The Geometry controls allow you to adjust the curvature or angle of the  
sides of your display.  
Increases or decreases the curvature of the sides either inward or outward.  
Increases or decreases the curvature of the sides either to the left or right.  
Increases or decreases the tilt of the sides either to the left or right.  
Increases or decreases the top of the screen to be the same as the bottom.  
Rotates the entire display clockwise or counterclockwise  
Color Control/AccuColor® Control System  
Two color presets select the desired color setting. Each color setting is  
adjusted at the factory to the stated degree Kelvin.  
4
Untitled-1  
6
6/15/98, 1:25 PM  
Controls  
Tools 1  
Reduces horizontal moire patterns.  
Reduces vertical moire patterns.  
Tools 2  
Degauss Control: Eliminates the buildup of stray magnetic fields that  
alter the correct scan of the electron beams and affect the purity of the  
screen colors, focus and convergence. When activated, your screen  
image will jump and waver a bit as the screen is demagnetized.  
Caution: Please allow a minimum of 20 minutes to elapse  
between uses of the Degauss Control.  
Indicates the frequency setting of the monitor.  
IPMSystem:  
On: The IPM System works normally and all stages  
of energy savings are utilized.  
Off: The Off Mode of the IPM System is not used.  
NOTE: For standard systems and graphics boards, keep the  
factory setting at ON.  
Selecting ALL RESET allows you to reset all OSMcontrol settings back to  
the factory settings except IPM System. Individual settings can be reset  
by highlighting the control to be reset and pressing the RESET button.  
5
Untitled-1  
7
6/15/98, 1:25 PM  
Recommended Use  
Safety Precautions and Maintenance  
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE  
FOLLOWING WHEN SETTING UP AND USING  
THE MULTISYNC® E900COLOR MONITOR:  
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside  
and opening or removing covers may expose you to dangerous shock hazards  
or other risks. Refer all servicing to qualified service personnel.  
Allow adequate ventilation around the monitor so that heat can properly  
dissipate. Do not block ventilated openings or place the monitor near a  
radiator or other heat sources. Do not put anything on top of monitor.  
Do not spill any liquids into the cabinet or use your monitor near water.  
Do not insert objects of any kind into the cabinet slots, as they may touch  
dangerous voltage points, which can be harmful or fatal or may cause electric  
shock, fire or equipment failure.  
Do not place any heavy objects on the power cord. Damage to the cord may  
cause shock or fire.  
Do not place this product on a sloping or unstable cart, stand or table, as the  
monitor may fall, causing serious damage to the monitor.  
Keep the monitor away from high capacity transformers, electric motors and  
other devices such as external speakers or fans, which may create strong  
magnetic fields.  
If possible, position the monitor so that it is facing the east to minimize the  
effects of the earth’s magnetic field.  
Changing the direction of the monitor while it is powered on may cause image  
discoloration. To correct this, turn the monitor off for 20 minutes before  
powering it back on.  
When operating the MultiSync E900 with its AC 220-240V worldwide power  
supply, use a power supply cord that matches the power supply voltage of the  
AC power outlet being used. The power supply cord you use must have been  
approved by and comply with the safety standards of your country.  
The power cable connector is the primary means of detaching the system from  
the power supply. The monitor should be installed close to a power outlet  
which is easily accessible.  
Handle with care when transporting. Save packaging for transporting.  
Immediately unplug your monitor from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
When the power supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into the monitor.  
If the monitor has been exposed to rain or water.  
If the monitor has been dropped or the cabinet damaged.  
If the monitor does not operate normally by following operating instructions.  
6
Untitled-1  
8
6/15/98, 1:25 PM  
Recommended Use  
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR  
CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE  
FOLLOWING WHEN YOU POSITION THE MONITOR:  
Adjust the monitor height so that the top of the screen is at or slightly below  
eye level. Your eyes should look slightly downward when viewing the middle  
of the screen.  
Position your monitor no closer than 12 inches and no further away than 28 inches  
from your eyes. The optimal distance is 18 inches.  
Rest your eyes periodically by focusing on an object at least 20 feet away.  
Blink often.  
Position the monitor at a 90° angle to windows and other light sources to  
minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do  
not reflect on your screen.  
If reflected light makes it hard for you to see your screen, use an anti-glare filter.  
Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a  
non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner to  
minimize dust.  
Adjust the monitor’s brightness and contrast controls to enhance readability.  
Use a document holder placed close to the screen.  
Position whatever you are looking at most of the time (the screen or  
reference material) directly in front of you to minimize turning your head  
while you are typing.  
Get regular eye checkups.  
For more detailed information on setting up a healthy work environment, call NEC  
at (800) 820-1230, NEC FastFactsinformation at (800) 366-0476 and request  
document #900108 or write the American National Standard for Human Factors  
Engineering of Visual Display Terminal Workstations – ANSI-HFS Standard  
No. 100-1988 – The Human Factors Society, Inc. P.O. Box 1369, Santa Monica,  
California 90406.  
7
Untitled-1  
9
6/15/98, 1:25 PM  
Specifications  
Monitor  
MultiSync® E900™  
Notes  
Specifications  
Picture Tube  
Monitor  
19 inch  
Diagonal:  
90° deflection, 0.28 mm trio dot pitch,  
medium short persistence phosphor,  
multi-layered, anti-static screen coating,  
semi-tint screen, Invar Shadow Mask and  
OptiClear® screen surface.  
Viewable Image Size:  
Radius:  
18.0 inch  
1330 mm  
Input Signal  
Video:  
Sync:  
ANALOG 0.7 Vp-p/75 Ohms  
Separate sync. TTL Level  
Horizontal sync. Positive/Negative  
Vertical sync. Positive/Negative  
Composite sync. (Positive/Negative) (TTL Level)  
Display Colors  
Analog input:  
Unlimited number of Colors  
Depends on display card used.  
Synchronization  
Range  
Horizontal:  
Vertical:  
31 kHz to 92 kHz  
55 Hz to 120 Hz  
Automatically  
Automatically  
Resolutions Supported  
640 x 480 @ 55 to 120 Hz  
800 x 600 @ 55 to 120 Hz  
832 x 624 @ 55 to 120 Hz  
1024 x 768 @ 55 to 112 Hz  
Some systems may not support  
all modes listed.  
Resolution based on horizontal and  
vertical frequencies only  
1280 x 1024 @ 55 to 85 Hz ..................... NEC cites recommended resolution at  
1600 x 1200 @ 55 to 73 Hz  
85 Hz for optimal display performance  
Active Display Area  
(Factory Setting)  
Horizontal:  
Vertical:  
356 mm/14.0 inches  
267 mm/10.5 inches  
Dependent upon signal timing used,  
and does not include border area.  
Active Display Area  
(Full Scan)  
360 mm/14.2 inches  
270 mm/10.6 inches  
Dependent upon signal timing used,  
and does not include border area.  
Power Supply  
Current Rating  
Dimensions  
AC 100 – 120 V/220 - 240 V@, 50/60 Hz  
2.0A @ 100  
120 V/1.0A@ 220-240 V  
447 mm (W) x 462 mm (H) x 479 mm (D)  
17.6 inches (W) x 18.2 inches (H) x 18.9 inches (D)  
Weight  
23.5 kg  
51.8 lbs  
Environmental Considerations  
Operating Temperature:  
Humidity:  
0°C to +35°C  
30% to 80%  
Feet:  
0 to 10,000 Feet  
-20°C to +60°C  
10% to 90%  
Storage Temperature:  
Humidity:  
Feet:  
0 to 45,000 Feet  
NOTE: Technical specifications are subject to change without notice.  
8
Untitled-1  
10  
6/15/98, 1:25 PM  
Features  
OptiClear® Screen Surface: Reduces reflection and glare and increases contrast  
without sacrificing focus level, clarity or brightness. Along with the flat square  
technology CRT, a high contrast screen with 0.28 mm trio dot pitch delivers crisp,  
clean text and graphics.  
Invar Shadow Mask: Holes in the thin metal sheet behind the glass of the CRT  
surface correspond to each phosphor dot on the inner surface of the CRT’s  
faceplate, allowing the correct electron beam (red, green, blue) to hit the correct  
color phosphor for improved focus, brightness and color.  
Dual Dynamic Beam Focus: Provides precise, continuous focus adjustments of the  
electron beams and optimum image quality, even to the far edges of the screen.  
AccuColor® Control System: Allows you to change between two color settings on  
your display to match your personal preference.  
OSM(On-Screen Manager) Controls: Allow you to quickly and easily adjust all  
elements of your screen image via simple to use on-screen menus.  
ErgoDesign® Features: Enhance human ergonomics to improve the working  
environment, protect the health of the user and save money. Examples include  
OSM controls for quick and easy image adjustments, tilt/swivel base for pre-  
ferred angle of vision and compliance with MPRII guidelines for lower emissions.  
Plug and Play: The Microsoft® solution with the Windows®95 operating system  
facilitates setup and installation by allowing the monitor to send its capabilities  
(such as screen size and resolutions supported) directly to your computer,  
automatically optimizing display performance.  
IPM(Intelligent Power Manager) System: Provides innovative power-saving  
methods that allow the monitor to shift to a lower power consumption level when  
on but not in use, saving two-thirds of your monitor energy costs, reducing  
emissions and lowering the air conditioning costs of the workplace.  
Reduced Magnetic FieldTechnology: Reduces magnetic and alternating electric  
field emissions and static electricity, addressing ergonomic concerns regarding  
potential risks from extended computer monitor use.  
Multiple Frequency Technology: Automatically adjusts monitor to the display  
card’s scanning frequency, thus displaying the resolution required.  
FullScanCapability: Allows you to use the entire screen area in most resolu-  
tions, significantly expanding image size.  
OSM Display Screen Copyright 1998 by NEC Technologies, Inc.  
9
Untitled-1  
11  
6/15/98, 1:25 PM  
Troubleshooting  
No picture  
• Display card should be completely seated in its slot.  
• Power Button and computer power switch should be in the ON position.  
• Signal cable should be completely connected to display card/computer.  
• Check connector for bent or pushed-in pins.  
Image is scrolling or unstable  
• Signal cable should be completely attached to the computer.  
• Check pin assignments and signal timings of the monitor and your  
display card with respect to recommended timings and pin assignments.  
• If the Macintosh cable adapter is used, check for prior connection or  
make sure the display card is Macintosh compatible and that the card is  
properly seated in the computer.  
LED on monitor is not lit (no green, orange, yellow color can be seen)  
• Power Switch should be in the ON position and power cord should  
be connected.  
Picture is fuzzy or color looks blotchy  
• Adjust Brightness and Contrast Controls.  
• Access the Degauss Control through OSM™ controls. Activate the  
Degauss Control.  
CAUTION: A minimum interval of 20 minutes should elapse before the  
Deguass Control is used a second time when not switching  
between modes.  
Picture bounces or a wavy pattern is present  
in the picture  
• Move electrical devices that may be causing electrical interference away  
from the monitor.  
• See inside cover of User’s Manual for FCC information.  
Edges of the display image are not square  
• Use the OSM Geometry Controls to straighten the edges.  
• If possible, position the front of the monitor facing east.  
Display image is not centered, too small, or too large  
• Use the OSM Size and Position Controls to adjust the image.  
10  
Untitled-1  
12  
6/15/98, 1:25 PM  
References  
• BBS  
(978) 635-4706  
NEC Technologies’ Remote Bulletin Board System is an electronic service  
accessible with your system and a modem. Communication parameters  
are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits,  
1 stop bit  
• Customer Service/  
Technical Support  
Fax  
(800) 632-4662  
(978) 635-4298  
• Electronic Channels:  
Internet e-mail: [email protected]  
Internet ftp site: ftp.nectech.com  
CompuServe: go NECTECH  
World Wide Web: http://www.nec.com  
• FastFacts™ Information  
INFORMATION  
MultiSync® E900monitor  
(800) 366-0476  
DESCRIPTION  
DOCUMENT #  
194101  
Detailed monitor information  
Glossary  
Definition of terms related  
to functions, features and  
installation of the  
900203  
MultiSync monitor  
More Information  
Names and addresses of  
other groups involved in  
standards and features of  
the MultiSync monitor  
900204  
Macintosh Connection  
Detailed information on  
connecting the MultiSync  
monitor to a Macintosh  
153006  
900108  
Healthy Work Environment  
Detailed information on  
setting up a healthy work  
environment  
• Literature & Sales Info  
• MultiSync Fulfillment  
(800) NEC-INFO [(800) 632-4636]  
(800) 820-1230  
[For software & accessories]  
• TeleSales  
(800) 284-4484  
11  
Untitled-1  
13  
6/15/98, 1:25 PM  
Limited Warranty  
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from  
defects in material and workmanship and, subject to the conditions set forth below, agrees  
to repair or replace any part of the enclosed unit which proves defective for a period of three  
(3) years from the date of first consumer purchase. Spare parts are warranted for ninety  
(90) days.  
This warranty gives you specific legal rights and you may also have other rights which vary  
from state to state. This warranty is limited to the original purchaser of the Product and is not  
transferable. This warranty covers only NECTECH-supplied components. Service required as  
a result of third party components is not covered under this warranty. In order to be covered  
under this warranty, the Product must have been purchased in the U.S.A. or Canada by the  
original purchaser. This warranty only covers Product distribution in the U.S.A. or Canada by  
NECTECH. Any use or installation outside the U.S.A. or Canada will void this warranty.  
Proof of Purchase will be required by NECTECH to substantiate date of purchase. Such proof  
of purchase must be an original bill of sale or receipt containing name and address of seller,  
purchaser, and the serial number of the product.  
It shall be your obligation and expense to have the Product shipped, freight prepaid, or  
delivered to the authorized reseller from whom it was purchased or other facility authorized  
by NECTECH to render the services provided hereunder in either the original package or a  
similar package affording an equal degree of protection. All Products returned to NECTECH  
for service MUST have prior approval, which may be obtained by calling 1-800-632-4662.  
The Product shall not have been previously altered, repaired, or serviced by anyone other  
than a service facility authorized by NECTECH to render such service, the serial number  
of the product shall not have been altered or removed. In order to be covered by this warranty  
the Product shall not have been subjected to displaying of fixed images for long periods of  
timeresultinginimagepersistence(afterimageeffects), accident, misuseorabuseoroperated  
contrary to the instructions contained in the User’s Manual. Any such conditions will void this  
warranty.  
NECTECH SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL,  
OR OTHER TYPES OF DAMAGES RESULTING FROM THE USE OF ANY NECTECH  
PRODUCTOTHERTHANTHELIABILITYSTATEDABOVE. THESEWARRANTIESAREINLIEUOF  
ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE  
LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.  
This Product is warranted in accordance with the terms of this limited warranty. Consumers  
are cautioned that Product performance is affected by system configuration, software, the  
application, customer data, and operator control of the system, among other factors. While  
NECTECH Products are considered to be compatible with many systems, specific functional  
implementation by the customers of the Product may vary. Therefore, suitability of a Product  
for a specific purpose or application must be determined by consumer and is not warranted  
by NECTECH.  
For the name of your nearest authorized NECTECH service facility, contact NECTECH  
at 1-800-632-4662.  
12  
Untitled-1  
14  
6/15/98, 1:25 PM  
tNotest  
13  
Untitled-1  
15  
6/15/98, 1:25 PM  
NEC Enterprise Series  
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER  
The information disclosed in this document, including all designs and related materials, is the valuable property of NEC  
Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this  
document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights  
are expressly granted to others.  
The NEC Technologies product(s) discussed in this document are warranted in accordance with the terms of the Limited  
WarrantyStatementaccompanyingeachproduct.However,actualperformanceofeachsuchproductisdependentupon  
factors such as system configuration, customer data and operator control. Since implementation by customers of each  
product may vary, the suitability of specific product configurations and applications must be determined by the customer  
and is not warranted by NEC Technologies.  
To allow for design and specification improvements, the information in this document is subject to change at any time  
without notice. Reproduction of this document or portions thereof without prior approval of NEC Technologies is  
prohibited.  
DECLARATION OF CONFORMITY  
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may  
not cause harmful interference, and (2) this device must accept any interference received, including interference that may  
cause undesired operation.  
U.S. Responsible Party: NEC Technologies, Inc.  
Address:  
1250 N. Arlington Heights Road, Suite 500  
Itasca, Illinois 60143  
Tel. No.:  
(630) 467-5000  
Type of Product:  
Equipment Classification:  
Models:  
Computer Monitor  
Class B Peripheral  
JC-1941UMA  
We hereby declare that the equipment specified above  
conforms to the technical standards as specified in the FCC Rules.  
MultiSyncisaregisteredtrademarkofNECTechnologies, Inc. intheU.S. andofNECHomeElectronics, Ltd. inCanada, UK, Germany, France,  
Spain, Italy, Austria, Benelux, Switzerland, Denmark, Finland, Norway and Saudi Arabia. AccuColor, OptiClear and ErgoDesign are  
registered trademarks of NEC Technologies, Inc. in the U.S. and Canada. E900, Reduced Magnetic Field, IPM, FastFacts, FullScan and OSM  
aretrademarksofNECTechnologies,Inc.intheU.S.NECisaregisteredtrademarkofNECCorporationCopyright1998byNECTechnologies,  
Inc. OSM Display Screens Copyright 1998 by NEC Technologies, Inc. Windows is a registered trademark of Microsoft Corporation. All other  
brands and product names are trademarks or registered trademarks of their respective owners.  
As an Energy Star Partner, NEC Technologies has determined that this product mets the Energy Star guidelines for energy efficiency. The  
Energy Star emblem does not represent EPA endorsement of any product or service.  
Part No. 78133231  
Printed in Malaysia  
Untitled-1  
16  
6/15/98, 1:25 PM  

Intel SERVER BOARD S5520HCT User Manual
JVC AV 29QS27 User Manual
JVC DVD CINEMA SYSTEM TH V70R User Manual
Market Forge Industries M 3092 User Manual
Mitsubishi Electronics 230SB User Manual
Motorola MVME5100 Series User Manual
Philips 25PT4323 User Manual
Philips 150E6 User Manual
Philips 200s4 User Manual
Philips Onis 300 User Manual