Miele KM 3474 User Manual

Operating and Installation  
Instructions  
Gas Cooktop  
KM 3464 / KM 3465  
KM 3474 / KM 3475  
KM 3484 / KM 3485  
®
UV  
M.-Nr. 06 818 490  
®
To prevent accidents and  
machine damage,  
read the Operating Manual  
before installation or use.  
WARNING:  
If the information in this manual is not followed  
exactly, a fire or explosion may result causing  
property damage, personal injury or death.  
– Do not store or use gasoline or other flammable  
vapors and liquids in the vicinity of this or any  
other appliance.  
– WHAT TO DO IF YOU SMELL GAS  
ß Do not try to light any appliance.  
ß Do not touch any electrical switch.  
ß Do not use any phone in your building.  
ß Immediately call your gas supplier from a  
neighbor’s phone. Follow the gas supplier’s  
instructions.  
ß If you cannot reach your gas supplier, call the  
fire department.  
– Installation and service must be performed by a  
qualified installer, service agency or the gas  
supplier.  
(In Massachusetts a licensed plumber / gas fitter)  
– Note to the installer:  
Please leave this instruction book with the  
consumer for the local electrical / gas inspector’s  
use.  
3
Contents  
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Guide to the cooktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
KM 3464 / KM 3465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
KM 3474 / KM 3475 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
KM 3484 / KM 3485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Before using the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Cleaning the cooktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Using the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Fast-Ignition-System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Turning on and off / Regulating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Pan size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Suitable pans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Safety feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Using the cooktop during a power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Technical Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Appliance dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
KM 3464 / KM 3465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
KM 3474 / KM 3475 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
KM 3484 / KM 3485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Setting the cooktop into place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Securing the cooktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Gas connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Gas pressure regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Nominal Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Converting to another type of gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Help protect our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
4
IMPORTANT SAFETY INSTRUCTIONS  
Installation and connection  
Before servicing, turn off the gas  
valve and disconnect the power  
supply by either removing the fuse,  
unplugging the unit or manually  
“tripping” the circuit breaker.  
When using your gas appliance  
follow basic safety precautions  
including the following:  
This equipment has not been  
designed for maritime use or for  
use in mobile installations such as  
aircraft or recreational vehicles.  
However, under certain circumstances  
it may be possible for installation in  
these applications. Please contact the  
nearest Miele Dealer or the Miele  
Technical Service Department with  
specific requirements.  
Read all instructions before using  
for the first time.  
Be certain your appliance is  
properly installed and grounded by  
a qualified technician.  
To guarantee the electrical safety  
of this appliance, continuity must  
exist between the appliance and an  
effective grounding system. It is  
imperative that this basic safety  
requirement be met. If there is any  
doubt, have the electrical system of the  
house checked by a qualified  
electrician. The manufacturer cannot be  
held responsible for damages caused  
by the lack, or inadequacy, of an  
effective grounding system.  
After connecting the appliance test  
for leaks according to the  
installation instructions.  
If there is any doubt concerning  
installation contact Miele’s  
Technical Service Department.  
U 1-800-999-1360  
Install the appliance so that the  
power cord and gas piping do not  
come into contact with any portion of  
the cooktop which may become hot  
during use.  
V 1-800-565-6435  
Do not connect the appliance to  
the main electrical supply using an  
extension cord. Extension cords do not  
meet the safety requirements of this  
appliance.  
5
IMPORTANT SAFETY INSTRUCTIONS  
Correct usage  
Do not use pans that extend past  
the burner grate. Using larger pans  
may cause the flames to spread out  
and damage the surrounding  
countertop or other countertop  
appliances.  
Do not operate the cooktop until it  
is properly installed in the  
countertop.  
This appliance is intended for  
residential cooking only.  
For safety and stability, do not use  
pans with a bottom diameter  
smaller than the burner grate.  
Use the appliance only for its  
intended purpose. The  
manufacturer cannot be held  
responsible for damages caused by  
improper use of the cooktop.  
Only certain types of glass,  
ceramic or other glazed cookware  
are suitable for use on a cooktop  
without breaking due to the sudden  
temperature change.  
Be sure drafts do not blow  
flammable material toward the  
flames or push the flames so that they  
extend beyond the edges of the pan.  
Do not store aerosols, gasoline,  
combustibles or any other  
Install the cooktop in a room that  
has sufficient ventilation.  
flammable materials underneath or  
adjacent to the cooktop.  
This appliance must not be  
operated outdoors.  
WARNING - NEVER use this  
appliance as a space heater to heat  
or warm the room. Doing so may  
result in carbon monoxide poisoning  
and overheating.  
Do not use aluminum foil to line any  
part of the cooktop.  
For proper lighting and  
performance of the burners, keep  
the igniters clean and dry.  
Protection from damage  
Do not use a steam cleaner to  
clean the appliance. Steam could  
penetrate electrical components and  
cause a short circuit.  
Make sure all components of the  
gas burners are assembled  
correctly before using the cooktop.  
Ensure that any burners in use are  
always covered with a pan.  
Spills containing salt or sugar  
should be removed immediately.  
6
IMPORTANT SAFETY INSTRUCTIONS  
Personal safety  
Do not leave the cooktop  
unattended while in use. Boil-overs  
cause smoking, and greasy spill-overs  
may ignite.  
The burners become very hot  
when in use. Make sure that no one  
comes in contact with them.  
Do not use water on grease fires.  
Smother any fire or flame, or use a  
dry chemical or foam-type extinguisher.  
Do not leave children unattended  
in an area where the appliance is in  
use.  
Do not flambé under an exhaust  
hood. Flames could be drawn up  
into the hood by the suction or the  
grease filters may ignite.  
Do not store toys or items of  
interest to children in cabinets  
above or behind the cooktop. Children  
climbing onto the cooktop to reach  
these items may become seriously  
injured.  
For safety reasons the flame  
should be adjusted to be the same  
size as the bottom of the pan or smaller.  
Do not use small pans with high flame  
settings as the flames can climb the  
sides of the pan.  
Do not allow children to operate or  
play with the cooktop. Keep all  
pans out of the reach of children.  
Use only dry, heat resistant  
potholders. Moist or damp  
potholders used on hot surfaces can  
result in steam burns. Do not let the  
potholder touch the hot burners. Do not  
Only use cooking utensils suitable  
for cooktop use.  
Always position pan handles and  
utensils inward so they do not  
use towels or other bulky items near the extend over adjacent work areas,  
appliance.  
burners or the edge of the cooktop.  
Be aware of loose fitting or hanging  
If there is a drawer directly  
garments when operating the  
cooktop, they may present a fire  
hazard.  
underneath the appliance without a  
wooden base in between, ensure that  
no aerosols, combustible liquids or  
other easily flammable materials are  
kept in it. If cutlery inserts are to be  
placed in the drawer, these must be  
made of a heat-resistant material.  
Do not heat unopened food  
containers. Built-up pressure may  
cause the container to burst and result  
in injury.  
Do not store items on the cooktop  
when not in use.  
Do not let cooking grease or other  
flammable materials accumulate  
on the appliance.  
7
IMPORTANT SAFETY INSTRUCTIONS  
Damage to the appliance  
Further safety notes  
In the event of damage or a defect,  
turn off the appliance immediately.  
Turn off the gas shut off valve and  
disconnect completely from the  
electricity supply. Contact the Miele  
Technical Service Department.  
Do not use the appliance until it has  
been repaired.  
When using a portable appliance  
near the cooktop, make sure that  
its power cord does not come in  
contact with the cooktop.  
Do not use containers made of  
plastic or aluminum. They may melt  
at high temperatures.  
Ensure power is not supplied to the  
appliance while repair work is carried  
out.  
Do not heat empty pots or pans,  
they may be damaged.  
Before discarding an old  
appliance, disconnect it from the  
gas and electrical supply and cut off  
the power cord to prevent it from  
becoming a hazard.  
Repairs should only be performed  
by qualified technicians to ensure  
safety. Repairs and other work by  
unqualified persons could be  
dangerous. Under no circumstance  
open the outer casing of the appliance.  
SAVE THESE INSTRUCTIONS  
While the appliance is under  
warranty repairs should only be  
performed by a Miele authorized  
service technician. Otherwise the  
warranty is void.  
8
Guide to the cooktop  
KM 3464 / KM 3465  
aWok Ring  
Control knobs:  
bNormal Burners  
cFast Burner  
fFront left burner  
gFront right burner  
hRight rear burner  
iLeft rear burner  
dGrates  
(Design depends on model)  
eWok Burner  
9
Guide to the cooktop  
KM 3474 / KM 3475  
aWok Ring  
The layout of the control knobs  
corresponds with the layout of the  
burners.  
bNormal Burners  
cFast Burner  
dGrates  
(Design depends on model)  
eWok Burners  
10  
Guide to the cooktop  
KM 3484 / KM 3485  
aWok Ring  
Control Knobs:  
bNormal Burners  
cFast Burners  
gFront right burner  
hFront center burner  
iFront left burner  
jRight rear burner  
kCenter rear burner  
lLeft rear burner  
dGrates  
(Design depends on model)  
eWok Burner Large  
fWok Burner Small  
Optional accessories  
A griddle plate and simmer plate are  
available from your Miele dealer or  
Miele.  
11  
Before using the cooktop  
Cleaning the cooktop  
Metal components have a protective  
coating which may give off a slight odor  
the first time your new appliance is  
heated.  
Before using for the first time clean the  
appliance as follows:  
^ Wash the gas burner assembly with a  
mild solution of warm water and  
liquid dish soap.  
The harmless odor will dissipate after a  
short time and does not indicate a  
faulty connection or appliance defect.  
^ Wipe dry and reassemble the parts in  
the proper order (see “Cleaning and  
care”).  
^ Wipe the cooktop with a damp cloth  
and dry thoroughly.  
12  
Using the cooktop  
Fast-Ignition-System  
Normal / Fast burner  
The gas cooktops are equipped with a  
Fast-Ignition-System which  
incorporates the following features:  
– The control knob can be released  
once it is turned to the largest flame  
symbol.  
– If the flame goes out during use,  
e.g. from a draft, the burner will auto-  
matically reignite.  
ß Cooktop is turned off  
& Highest flame  
If reignition is unsuccessful, the gas  
supply will automatically be shut-off  
(see “Safety feature”).  
/ Lowest flame  
Wok burner  
As a result of the Fast-Ignition-  
System, the ignitor stays activated  
for a few seconds, even when the  
flame is already lit.  
To prevent a gas leak, the Fast-  
Ignition-System will click until the  
safety thermostat is activated.  
ß Cooktop is turned off  
Turning on and off / Regulating  
* Highest flame:  
The control knob is used to light the  
burner and to regulate the strength of  
the flame.  
inner and outer burner  
are both at their highest setting.  
& High flame:  
outer burner is at the lowest setting,  
inner burner is at the highest setting.  
+ Low flame:  
outer burner is turned off,  
inner burner is at the highest setting.  
/ Lowest flame:  
outer burner is turned off,  
inner burner is at the lowest setting.  
13  
Using the cooktop  
Turning on  
^ To increase the flames from a low to  
high setting, turn the control knob  
clockwise until you reach the stop.  
Press the knob down to pass the  
stop, then release the pressure and  
set the cooktop to the desired  
setting.  
^ To light a burner press down and turn  
the corresponding control knob  
counterclockwise to the largest flame  
symbol. Release the knob. The ignitor  
will click and ignite the gas.  
The ignition process lasts about 8 - 10  
seconds. The flame should light within  
4 seconds. Even once the flame is lit,  
the ignition will continue to click for a  
few seconds for safety. If the burner  
does not light, repeat the process.  
Since the outer portion of the flame is  
much hotter than the center, the flame  
should be set so that it does not spread  
beyond the sides of the pan. Flame tips  
which extend beyond the sides of the  
pan are hazardous.  
If the burner does not light on the  
second attempt, turn the control knob  
to “ß” and see “Frequently asked  
questions”.  
^ Adjust the knob to the desired  
setting.  
Turning off  
^ Turn the control knob clockwise to  
ß”.  
Regulating the wok burner  
This stops the flow of gas and turns off  
the cooktop.  
The inner and outer burners are both  
controlled by one control knob. There is  
a stop at the 6 o’clock position that  
requires you to press the knob down  
while turning it in order to get from the  
high flame to the low flame zone.  
The knob must only be turned left to  
turn the appliance on and right to  
turn it off.  
^ To reduce the flames from a high to  
low setting, turn the control knob  
counterclockwise until you feel  
resistance. Press the knob down to  
pass the stop, then release the  
pressure and set the cooktop to the  
desired setting.  
If the knob is turned,  
- on without pressing it down first,  
- clockwise past the 12 o’clock  
position, or  
- counterclockwise past the smallest  
flame symbol,  
parts of the cooktop could be  
damaged. The manufacturer cannot  
be held responsible for these  
damages.  
14  
Using the cooktop  
Pan size  
Suitable pans  
– Set the cooktop to a high flame when Unlike pans used on an electric  
using a large diameter pan and low  
flame when using small diameter  
pans.  
cooktop, the bases do not need to be  
even for good results.  
Thick pan bases will give more even  
results, as hot spots are reduced due to  
better heat distribution.  
Thin pan bases will conduct the heat  
faster but not as evenly as thick pan  
bases. Stir the food frequently to  
prevent burning.  
Wok burners  
– Generally, wide / shallow pans will  
heat quicker and cook more evenly  
than narrow / tall ones.  
You can use a wok on these burners  
without any additional rings, trivets, etc.  
– Using oversized pans may cause the  
flames to spread out and damage  
the surrounding countertop or other  
countertop appliances. The proper  
pan size will also improve efficiency.  
If you wish to use the wok ring, for extra  
stability, attach it as shown (depending  
on your grates).  
– Do not use small pans with high  
flame settings, the flames may climb  
the sides of the pan.  
– Pots with a smaller diameter than the  
pan support and pots that do not sit  
securely (without wobbling) are  
hazardous and should not be used.  
15  
Using the cooktop  
Safety feature  
Using the cooktop during a  
power failure  
This appliance is equipped with an  
Ignition Safety Control. This control cuts  
the gas supply if the flame goes out  
and reignition is unsuccessful.  
If there is an interruption to the  
electrical supply the gas can be ignited  
using a match.  
^ To reignite the burner, turn the control  
knob to “ß”, then follow the  
procedure outlined in “Turning on  
and off / Regulating”.  
^ Press down and turn the desired  
control knob counterclockwise to the  
largest flame symbol.  
^ While holding down the knob, light  
the gas at the burner with a match.  
This safety feature is not operated by  
electricity, it will be active even if the  
appliance is in use during a power  
failure.  
^ When the flame appears, keep the  
control knob pressed in for 8 - 10  
seconds to allow for the Ignition  
Safety Control to reach operating  
temperature.  
16  
Cleaning and care  
Cooktop  
Never use a steam cleaner to clean  
this cooktop. Pressurized steam  
could cause permanent damage to  
the surface and to components for  
which the manufacturer cannot  
accept responsibility.  
Let the appliance cool to a safe  
temperature before removing the  
grates.  
^ Clean the grates, cooktop and knobs  
with a sponge and a mild solution of  
warm water and liquid dish soap.  
Do not use any sharp or pointed  
objects which could damage the  
seal between the frame and the  
countertop.  
^ Soak baked or hardened spills.  
Dry the cooktop and grates  
thoroughly after cleaning.  
The stainless steel surfaces can be  
cleaned using a non-abrasive stainless  
steel cleaner.  
To help prevent resoiling, a conditioner  
for stainless steel can also be used.  
Apply sparingly with even pressure.  
Never use scouring agents, pads,  
abrasive cleaning agents, or strong  
cleaners, e.g. oven sprays, stain or  
rust removers, these could damage  
the surface of the appliance.  
Stainless steel colored knobs  
Keep the ignitor in the burner dry. If  
it gets wet it will not spark.  
These controls may become  
discolored or damaged if not  
cleaned regularly.  
Do not use a stainless steel cleaner  
on the knobs.  
Dry your cooktop thoroughly after  
cleaning it to prevent lime deposits.  
Spills containing salt or sugar should  
be cleaned immediately.  
17  
Cleaning and care  
Burners  
Reassembling the wok burner  
The burners can be dismantled and  
cleaned when cool.  
a
b
^ Remove the burner parts and wash  
them in a solution of hot water and  
liquid dish soap. Dry them  
thoroughly. Make sure that the flame  
holes are clean and completely dry.  
c
d
^ Wipe the burner base clean with a  
damp cloth and then dry.  
^ Gently wipe the ignitor and ignition  
safety control with a slightly damp  
cloth, and then wipe dry.  
e
Make sure that no liquid gets into the  
appliance.  
Reassembling the normal and fast  
burners  
^ Place the burner head, d, onto the  
burner base, e.  
a
^ Fit the burner ring, c.  
^ Fit the large burner cap, b, onto the  
burner head, d.  
^ Seat the small burner cap, a.  
^ Put the grates in place.  
b
Be careful not to mix up the parts.  
Make sure that all the locating tabs and  
notches align exactly.  
^ Place the burner cap, a, onto the  
burner base, b, so that the notches  
fit into the holes (see arrows).  
18  
Frequently asked questions  
,Repairs should only be carried out by an authorized technician in  
accordance with local and national safety regulations. Unauthorized repairs  
could cause injury or appliance damage. The manufacturer cannot be held  
responsible for unauthorized work.  
The burners do not ignite after several attempts.  
Possible fault  
Fix  
The burners are assembled  
Reassemble the burners as shown in  
incorrectly.  
“Cleaning and Care - Burners”.  
The gas valve is closed.  
Open the gas valve.  
The burners are wet and soiled Clean the burners. See “Cleaning and  
and/or the flame holes in the  
Care”.  
burners are soiled and clogged.  
Dry the igniters.  
The igniters are wet.  
Plug the cooktop in and restore power.  
If lack of power is the problem, the  
cooktop can be lit with a match. See  
“Using the cooktop during a power  
failure”.  
The cooktop is not plugged in  
and the circuit breaker has  
tripped.  
The flame goes out after being lit.  
The burners are assembled  
Reassemble the burners as shown in  
incorrectly.  
“Cleaning and Care - Burners”.  
The flame holes in the burners  
Clean the burners. See “Cleaning and  
are soiled and clogged.  
Care”.  
The igniters no longer work.  
Residue has been built up  
between the ignitor and the  
burner.  
Clean the burners. See “Cleaning and  
Care”.  
Make sure the ignitor is dry.  
Dry the igniters.  
The flame appears different than usual.  
The burners are assembled  
Reassemble the burners as shown in  
“Cleaning and Care - Burners”.  
incorrectly.  
19  
Technical Service  
In the event of a fault which you cannot MieleCare  
easily fix yourself, please contact the  
Miele Technical Service Department at  
the address on the back of this booklet.  
MieleCare, our Extended Service  
Contract program; gives you the  
assurance of knowing that your  
When contacting Technical Service  
please quote the serial number and  
model of the cooktop. This information  
is visible on the silver data plate  
supplied with the cooktop.  
appliance investment is covered by 5  
years of worry free ownership.  
MieleCare is the only Extended Service  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
Adhere the data plate sticker to the box factory trained professionals can  
below:  
guarantee the safety, reliability and  
longevity of your Miele appliance.  
Please note that unless expressly  
approved in writing by the Miele  
Service department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
20  
Installation Instructions  
To prevent accidents  
and machine damage  
read these instructions  
before  
installation or use.  
21  
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
The minimum distances given in  
these Installation instructions are to  
combustible surfaces, and must be  
observed to ensure safe operation.  
Failure to do so increases the risk of  
fire.  
The cabinetry and venting hood  
should be installed first to prevent  
damage to the cooktop.  
recommended  
Gas appliances should only be  
installed in a well ventilated area.  
The countertop must be bonded  
with heat resistant (212 °F/100 °C)  
adhesive to prevent distortion or  
dissolving.  
The cooktop should only be  
installed as shown in the  
illustrations while maintaining the  
required safety distances shown. Do  
not install the cooktop between two tall  
cabinets, this is a fire hazard.  
not recommended  
a = indicates cooktop cut-out  
b = minimum distance between  
cut-out and a tall cabinet:  
12" (305 mm)  
This appliance has not been  
designed for maritime use or for  
use in mobile installations such as  
recreational vehicles or aircraft.  
However, under certain conditions it  
may be possible for installation in these  
applications. Please contact the Miele  
Technical Service Department with  
specific requirements.  
not allowed  
22  
IMPORTANT SAFETY INSTRUCTIONS  
The cooktop must not be installed  
Safety distances above the  
appliance  
over a dishwasher, washer, dryer,  
refrigerator or freezer. Heat radiated by  
the cooktop may damage the  
appliances.  
Deep fat fryers must not be  
installed next to gas cooktops. Gas  
flames can ignite splattering oil. A  
distance of at least 12" (305 mm)  
should be maintained between these  
two appliances. The minimum distance  
between two cooktops must be 4"  
(100 mm).  
There must be a safety distance of at  
least 30" (760 mm), c between the  
appliance and any objects above it.  
The overhead cabinet depth, d, if  
unprotected, must not exceed 13"  
(330 mm). The minimum distance of  
combustible surfaces located above  
and to the sides of the cooktop, e, is  
18" (457 mm).  
Install the appliance so that the  
power cord or gas piping does not  
come into contact with any portion of  
the cooktop which may become hot  
during use.  
This appliance must be installed  
with its own shut off valve and the  
included gas pressure regulator.  
Both the valve and the regulator  
must be easily accessible to the  
consumer after the appliance is  
installed.  
If the cabinet manufacturer  
recommends a greater distance, follow  
that manufacturers recommendation.  
When installing the cooktop under a  
venting hood, always observe the  
minimum distance recommended by  
the hood manufacturer.  
This appliance must be  
disconnected from the gas supply  
during any pressure testing of the  
system performed in excess of  
1/2 psi (3.5 kPa). This appliance  
must be isolated at test pressures  
equal to or less than 1/2 psi  
(3.5 kPa).  
Keep this instruction book in a safe  
place for reference and pass it on to  
any future user.  
Any pipe connections must be made  
using a thread sealant approved for  
gas connections. Failure to correctly  
install these items could lead to a  
gas leak and subsequent explosion.  
23  
Appliance dimensions  
KM 3464 / KM 3465  
5/16"  
21  
+1/16"  
-
+ 1/16"  
(542 mm)  
3/8"  
9mm  
+1  
-
-
b
30  
+
1
-
(762 mm)  
2 5/16"  
(58mm)  
3/16"  
ß
R4mm)  
ß
(
0
23/4"  
(
70mm)  
0
+
1/16"  
-
203/8"  
(518 mm+)  
-
3/8"  
1/16"  
+1  
-
+1  
-
28  
(720 mm)  
0
a
0
7mm)  
25"  
1 7/8"  
(
0
0
(
635mm)  
4
8 7/16"  
(215mm)  
c
3 1/4"  
a
(83mm)  
d
13/16"  
20mm)  
0
2 11/16"  
(
0
mm)  
69  
(
1/2"  
7
(190mm)  
31/16"  
(78mm)  
aFront  
bBuilt-in depth  
cGas connection R ½" NPT  
dMains connection box  
24  
Appliance dimensions  
KM 3474 / KM 3475  
5/16"  
21  
+1/16"  
-
"
3/8"  
(9mm)  
+
(542+1mm)  
1/16  
-
-
36+  
1
-
(914 mm)  
25/16"  
(58mm)  
3/16"  
(ßR4mm)  
ß
b
0
3/4"  
2
(
70mm)  
0
+
1/16"  
-
20  
-
3/8" +  
35  
(518 mm)  
1/16"  
-
+1  
)  
0
a
7/8"  
1
25"  
635mm)  
(
0
(
0
47mm)  
87/8"  
(226mm)  
b
3 3/8"  
31/16"  
(86mm)  
d
(78mm)  
a
c
13/16"  
0
0
20mm)  
5 9/16"  
5/16"  
7
(142mm)  
(185mm)  
11/16"  
6
(170mm)  
31/8"  
(80mm)  
aFront  
bBuilt-in depth  
cGas connection R ½" NPT  
dMains connection box  
25  
Appliance dimensions  
KM 3484 / KM 3485  
215/16"  
-
+1/16"  
-
+1/16"  
(542+1mm)  
3/8"  
(9mm)  
-
1/2"  
+
1
42  
-
(1079 mm)  
25/16"  
(58mm)  
3/16"  
ß
ß
( R4mm)  
b
0
3/4"  
2
0
70mm  
+
1/16"  
-
1/2"  
20 3/8"  
-
+1  
(518 mm) +  
-
41  
1/16"  
-
+1  
(1054 mm)  
0
a
25  
635mm)  
(
0
0
"
17/8"  
(
47mm)  
0
9"  
(228mm)  
c
b
d
31/4"  
(83mm)  
a
13/16"  
33/8"  
0
(86mm)  
0
(
20mm)  
11/16"  
(2820mm)  
1/8"  
12  
37/16"  
(87mm)  
(307,5mm)  
31/16"  
(78mm)  
aFront  
bBuilt-in depth  
cGas connection R ½" NPT  
dMains connection box  
26  
Installation  
^ Prepare the work top cut-out as  
shown in the diagram.  
Remember to maintain the minimum  
safety distances to combustible  
surfaces:  
- 2 3/4" (70 mm) between the cut-out  
and the back wall and  
- 12" (305 mm) between the cut-out  
and a side wall or tall unit to the right  
or left of the cut-out.  
(See "Important Safety instructions").  
^ Seal the cut surfaces with a suitable  
heat-resistant sealant to avoid  
swelling caused by moisture.  
If during installation, the corners of  
the frame are not flush with the work  
top surface, the corner radius (max.  
3/16" [4 mm]) can be carefully filed to  
fit.  
27  
Installation  
Setting the cooktop into place  
Securing the cooktop  
^ Secure the cooktop with the included  
fixing bracket.  
Countertop 13/16" (20 mm)  
d
c
^ After removing the protective  
backing, d, stick the supplied seal,  
c, under the edge of the cooktop.  
Countertop 1 9/16" (40 mm)  
^ Screw the gas regulator onto the  
nipple underneath the cooktop. (See  
“Gas Connection - Gas pressure  
regulator”.)  
^ Feed the power cord through the  
cut-out to the power outlet.  
^ Set the cooktop in the cut-out and  
center it.  
Install the appliance so that the  
power cord and gas piping does not  
come in contact with any portion of  
the cooktop which may become hot  
during use.  
28  
Installation  
Sealing  
The cooktop must not be permanently  
sealed into the countertop when  
installed. The sealing strip under the  
edge of the cooktop provides a  
sufficient enough seal.  
If the cooktop is sealed into position,  
the countertop or the appliance may  
be damaged if the cooktop needs to  
be removed for maintenance or  
service.  
29  
Electrical connection  
This appliance must be grounded  
according to local or national codes.  
This appliance is equipped with a  
three-prong grounding plug to  
prevent shock hazards. It should be  
plugged directly into a properly  
grounded outlet. Do not cut or  
remove the grounding prong from  
the plug. If the plug does not fit the  
outlet, have the proper outlet  
All electrical work should be  
performed by a qualified electrician  
in accordance with local codes and  
with the:  
-
National Electrical Code  
ANSI / NFPA No. 70  
for the USA  
installed by a licensed electrician.  
or  
-
To guarantee the electrical safety of  
this appliance, continuity must exist  
between the appliance and an  
effective grounding system. It is  
imperative that this basic safety  
requirement be met. If there is any  
doubt, have the electrical system of  
the house checked by a qualified  
electrician.  
The manufacturer cannot be held  
responsible for damages caused by  
the lack, or inadequacy, of an  
effective grounding system.  
Canadian Electrical Code Part I  
for Canada  
(CSA Standard C 22.1).  
,WARNING  
Disconnect the appliance from the  
main power supply before  
installation or service. To reduce the  
risk of electric shock, make sure that  
the appliance is properly grounded  
after installation.  
Power supply  
Note to the installer  
The automatic ignition requires that the  
cooktop be connected to a 120 VAC,  
60 Hz power supply. The supply line  
should be protected by a 15 A fuse.  
Please leave these instructions with the  
consumer or the appliance.  
Actual power consumption (during  
ignition only) is 25 W.  
This appliance is equipped with a 4 ft.  
(1.2 m) long power cord that is ready  
for connection to the appropriate outlet.  
Place the power outlet so that it is  
accessible after the appliance has  
been installed in the countertop.  
30  
Electrical connection  
Wiring diagram  
,Caution: Label all wires prior to disconnection when servicing controls.  
Wiring errors can cause improper and dangerous operation.  
Verify proper operation after servicing.  
31  
Gas connection  
Installation and service must be  
performed by a qualified installer,  
service agency or gas supplier.  
The gas connection must be made  
in accordance with local codes or, in  
the absence of local codes, with  
In Massachusetts a licensed  
plumber / gas fitter is required.  
-
the National Fuel Gas Code,  
ANSI Z 21.1 / NFPA 54  
for the USA  
This appliance must be installed  
with its own shut off valve and the  
included gas pressure regulator.  
Both the valve and the regulator  
must be easily accessible to the  
consumer to turn on or shut off the  
gas supply after the appliance is  
installed.  
or  
-
the current Can / CGA B 149.1  
and .2 Installation Codes for gas  
burning appliances for Canada.  
Make sure that the maximum gas  
supply pressure before the gas  
pressure regulator is never more than ½  
psi for both natural gas or LP gas.  
This appliance and its individual  
shut off valve must be disconnected  
from the gas supply during any  
pressure testing of that system  
performed in excess of ½ psi  
The minimum required gas pressure to  
get the required gas input is  
4" w.c. for natural gas  
10" w.c. for LP gas.  
(3.5 kPa). The appliance must be  
isolated from the gas supply line by  
closing its individual manual shut off  
valve at test pressures equal to or  
less than ½ psi (3.5 kPa).  
Any pipe connections must be made  
using a thread sealant approved for  
gas connections. Failure to correctly  
install these items could lead to a  
gas leak and subsequent explosion.  
32  
Gas connection  
Gas pressure regulator  
For convenience, an AGA or CGA  
approved flexible stainless steel gas  
hose (accordion type) may be used  
between the gas connection and the  
regulator. This will allow the appliance  
to be lifted out of the countertop for  
cleaning or servicing. Make sure that  
any drawers, cabinet doors, etc., do not  
rub on this gas hose.  
A pressure regulator that is convertible  
from natural to LP gas (Propane) or vice  
versa is included with the appliance.  
The included regulator corresponds  
with the gas type of the cooktop. Verify  
before installing.  
The adjusted pressure is:  
natural gas - 4" w.c.  
LP gas - 10" w.c.  
Do not use any regulator unless it  
has been supplied by Miele. Doing  
so may cause a gas leak.  
If there is any doubt concerning  
installation contact the Miele Technical  
Service Department:  
U 1-800-999-1360  
V 1-800-565-6435  
After connecting the appliance check  
all fittings for gas leaks e.g. with  
soapy water.  
aCooktop  
b½" NPT  
When installed properly, the flame will  
be steady and quiet. It will also have a  
sharp, blue inner core that will vary in  
length proportional to the burner size.  
Flame adjustment will not be necessary.  
cRegulator  
As shown in the above diagram, the  
included regulator must be used when  
connecting the Miele cooktop to your  
gas supply. This item has been  
customized by Miele to meet all  
applicable safety requirements. Make  
sure the regulator is easily accessible  
for adjustment after the appliance has  
been installed.  
33  
Gas connection  
Nominal Rating Table  
KM 3464 / KM 3465 KM 3474 / KM 3475 KM 3484 / KM 3485  
NG / LP-Gas NG / LP-Gas NG / LP-Gas  
BTU/hr kW BTU/hr kW  
9,000 2.6  
Normal burner  
Max. output  
Min. output  
BTU/hr  
kW  
2.6  
9,000  
1,700  
2.6  
9,000  
1,700  
0.50  
0.50  
1,700  
0.5  
Fast burner  
Max. output  
Min. output  
12,000  
2,500  
3.5  
12,000  
2,500  
3.5  
12,000  
2,500  
3.5  
0.73  
0.73  
0.73  
Wok burner left  
Max. output  
Min. output  
15,300  
620  
4.5  
15,300  
620  
4.5  
15,300  
620  
4.5  
0.18  
0.18  
0.18  
Wok burner  
right  
Max. output  
Min. output  
All burners  
Max. output  
-
-
-
-
15,300  
620  
4.5  
16,500  
620  
4.8  
0.18  
0.18  
45,300  
13.2  
60,600  
17.7  
73,800  
21.6  
34  
Converting to another type of gas  
The cooktop should have been ordered  
for connection to either natural or LP  
gas.  
If the cooktop is not configured for the  
proper type of gas connection please  
contact your Miele Dealer.  
35  
Help protect our environment  
Disposal of packing materials  
Disposal of an old appliance  
The cardboard box and packing  
materials are biodegradable and  
recyclable. Please recycle.  
Old appliances contain materials that  
can be recycled. Please contact your  
local recycling center about the  
possibility of recycling these materials.  
Before discarding an old appliance,  
disconnect it from the gas and  
electrical supply and cut off the  
power cord to prevent it from  
becoming a hazard.  
36  
37  
38  
39  
Alterations rights reserved / 0107  
M.-Nr. 06 818 490 / 04  
en - USA  

JVC AV 28T4SP User Manual
Lenovo V200 User Manual
LG Electronics LG Life Good Computer Monitor L226WT User Manual
Life is good Computer Monitor N1642WP User Manual
Memorex MLT1912 User Manual
Oracle Audio Technologies Sun StorageTek ATCA 4Gb FC Dual Port HBA SG XPCIE2FC ATCA Z User Manual
Palsonic 5120G User Manual
Panasonic Cordless Telephone KX TC1740B User Manual
Philips 190B5CB User Manual
Philips 240BW9CS User Manual