Miele CS1312 User Manual

Operating and installation instructions  
Open barbeque grill  
CS 1312  
CS 1322  
en - GB  
To avoid the risk of accidents or  
damage to the appliance it is  
essential to read these  
instructions before it is installed  
and used for the first time.  
M.-Nr. 07 180 420  
Contents  
Installation of several appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Fixing the spring clamps and spacer bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Installing the appliance(s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
General installation tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
After sales service, data plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
3
Guide to the appliance  
CS 1312  
aGrill rack  
Controls for the heating elements:  
bFront heating element  
cRear heating element  
dLava rock container  
eDrain tap  
hFront  
iRear  
Display  
fSymbols to indicate which  
heating element the control is for  
gDisplay  
jIn-operation indicator  
4
Guide to the appliance  
CS 1322  
aGrill racks  
Controls for the heating elements:  
bFront heating element  
cRear heating element  
dLava rock container  
eDrain tap  
hFront  
iRear  
Display  
fSymbols to indicate which  
heating element the control is for  
gDisplay  
jIn-operation indicator  
5
Guide to the appliance  
Accessories supplied  
Additional accessories can be ordered at extra cost. See  
"Optional accessories" for further details on ordering.  
Lava rocks  
Tongs  
Brush  
6
Warning and safety instructions  
Correct application  
This appliance complies with all  
current safety requirements.  
Inappropriate use can, however,  
This appliance is not designed for  
~
commercial use. It is intended for use in  
domestic households and in similar  
lead to personal injury and damage  
to property  
working and residential environments  
such as:  
– Shops  
To avoid the risk of accidents and  
damage to the appliance, please  
read these instructions carefully  
before using it for the first time. They  
contain important notes on  
installation, safety, use and  
maintenance.  
– Offices and showrooms  
and by residents in establishments  
such as:  
– Hostels and guest houses.  
The appliance is intended for  
~
domestic use only to cook food and  
Keep these instructions in a safe  
place and ensure that new users are  
familiar with the content. Pass them  
on to any future owner.  
keep it warm.  
Any other use is not supported by the  
manufacturer and could be dangerous.  
Miele cannot be held liable for damage  
resulting from incorrect or improper use  
or operation of the appliance.  
This appliance is not intended for  
~
use by persons (including children)  
with reduced physical, sensory or  
mental capabilities, or lack of  
experience and knowledge, unless they  
are supervised while using it or have  
been given instruction concerning its  
use by a person responsible for their  
safety.  
7
Warning and safety instructions  
Safety with children  
Ensure that children cannot reach  
~
the drain tap where hot liquid could be  
This appliance is only intended for  
~
drained out.  
use by adults who have read these  
instructions. It is not a toy! To avoid the  
risk of injury, keep children well away  
and do not allow them to play with it or  
use the controls. They will not  
Packaging, e.g. cling film,  
~
polystyrene and plastic wrappings,  
must be kept out of the reach of babies  
and young children. Danger of  
understand the potential dangers  
suffocation. Dispose of or recycle all  
posed by it. They should be supervised packaging safely as soon as possible.  
whenever you are working in the  
kitchen.  
Older children may use the  
~
appliance only when its operation has  
been clearly explained to them and  
they are able to use it safely,  
recognising the dangers of misuse.  
The appliance gets hot when in use  
~
and remains hot for quite a while after  
being switched off. To safeguard  
against burning, keep children well  
away from the appliance at all times.  
Do not store anything which might  
~
arouse a child's interest in storage  
areas above or next to the grill.  
Otherwise they could be tempted into  
climbing onto the appliance with the  
risk of burning themselves.  
8
Warning and safety instructions  
Technical safety  
Installation, maintenance and  
~
repairs may only be carried out by a  
Before installation, check the  
~
suitably qualified and competent  
appliance for visible signs of damage.  
Under no circumstances should you  
use a damaged appliance. It could be  
dangerous.  
person in strict accordance with current  
national and local safety regulations.  
Repairs and other work by unqualified  
persons could be dangerous. Miele  
cannot be held liable for unauthorised  
work.  
The electrical safety of this  
~
appliance can only be guaranteed  
when continuity is complete between it  
and an effective earthing system. It is  
most important that this basic safety  
requirement is present and regularly  
tested, and where there is any doubt,  
the household wiring system should be  
inspected by a qualified electrician.  
Miele cannot be held liable for the  
consequences of an inadequate  
During installation, maintenance and  
~
repair work, the appliance must be  
disconnected from the mains electricity  
supply.  
While the appliance is under  
~
guarantee, repairs should only be  
undertaken by a service technician  
authorised by Miele. Otherwise the  
guarantee is invalidated.  
earthing system (e.g. electric shock).  
Before connecting the appliance to  
Faulty components must only be  
~
~
the mains supply, make sure that the  
voltage and frequency correspond to  
the rating on the data plate, otherwise  
the appliance could be damaged.  
Consult a qualified electrician if in any  
doubt.  
replaced by genuine Miele original  
spare parts. The manufacturer can only  
guarantee the safety of the appliance  
when Miele replacement parts are  
used.  
If the connection cable is damaged,  
~
For safety reasons, this appliance  
~
may only be used when it has been  
it must be replaced by a suitably  
qualified electrician with a specialist  
connection cable of type H 05 V V-F  
(pvc insulated), available from the Miele  
Spare Parts Department.  
built in.  
Never open the casing of the  
~
appliance.  
Tampering with electrical connections  
Do not connect the appliance to the  
~
or components and mechanical parts is mains electricity supply by a  
highly dangerous to the user and can  
cause operational faults.  
multi-socket unit or an extension lead.  
These do not guarantee the required  
safety of the appliance (e.g. danger of  
overheating).  
9
Warning and safety instructions  
This appliance may be connected  
Correct use  
~
via a fused plug and switched socket. If  
you wish to connect it to an fused spur  
connection unit, or if the appliance is  
supplied without a plug, it must be  
installed and connected by a suitably  
qualified and competent person in strict  
accordance with current local and  
national safety regulations. Miele  
cannot be held liable for damage  
caused by incorrect installation or  
connection.  
The appliance gets hot when in use  
~
and remains hot for quite a while after  
being switched off.  
Caution: Danger of burning.  
Do not leave the appliance  
~
unattended whilst it is being used.  
Overheated oil or residues of food or fat  
on the lava rocks could flare up and  
cause a fire.  
If oil or fat does catch fire, do not  
~
In countries where there are areas  
attempt to put out the flames with water.  
Use a suitable fire blanket, saucepan  
lid, damp towel or similar to smother the  
flames.  
~
which may be subject to infestation by  
cockroaches or other vermin, pay  
particular attention to keeping the  
appliance and its surroundings in a  
clean condition at all times. Any  
damage caused by cockroaches or  
other vermin will not be covered by the  
guarantee.  
Do not use the appliance to heat up  
~
the room, and never switch it on with  
the heating element in the raised  
position. Due to the high temperatures  
radiated, objects near the appliance  
could catch fire. The life of the  
appliance could also be reduced.  
Use heat-resistant pot holders or  
~
gloves when using the appliance. Do  
not let them get damp or wet, as this  
causes heat to transfer through the  
material more quickly with the risk of  
scalding or burning yourself.  
Do not flambé on the open  
~
barbecue grill. Fire hazard.  
10  
Warning and safety instructions  
Do not use the appliance as a  
The grill trough must always be filled  
~
with water whenever the grill is in use.  
~
resting place for anything else. When  
the appliance is switched on either  
deliberately or by mistake, or when  
there is residual heat present, there is  
the risk of metal objects heating up,  
with a danger of burning.  
When using an electrical appliance,  
~
e.g. a hand-held food blender, near the  
appliance, ensure that the cable of the  
electrical appliance cannot come into  
contact with the hot appliance. The  
insulation on the cable could become  
damaged, giving rise to an electric  
shock hazard.  
Depending on the material, other  
objects left on the appliance could also  
melt or catch fire.  
Switch the appliance off after use.  
Always ensure that food is  
~
Where several appliances are  
~
installed side by side  
sufficiently cooked or reheated. Some  
foods may contain micro-organisms  
which are only destroyed by thorough  
cooking at a sufficiently high  
Do not place hot pots or pans on the  
joining strip as this can damage the  
seal.  
temperature for long enough.  
Do not cover the appliance, e.g.  
Therefore, when cooking or reheating  
~
with a cloth, kitchen foil, etc. This could food such as poultry, it is particularly  
be a fire hazard if the hob were  
switched on by mistake.  
important that the food is completely  
cooked through. If in doubt, select a  
longer cooking or reheating time.  
When grilling or keeping food warm,  
~
do not use grill pans, griddles,  
saucepans or similar on the open grill,  
and never cover the rack(s) (e.g. with  
aluminium foil) or use disposable  
aluminium foil containers. The resulting  
build-up of heat could damage the  
rack(s).  
If the appliance is installed behind a  
~
kitchen furniture door, it may only be  
used with the furniture door open.  
Only close the door if the appliance is  
switched off.  
This appliance must not be set up or  
~
operated in the open air.  
Do not heat up unopened tins or jars  
~
of food on the grill as pressure will build  
up in the tin or jar, causing it to  
explode. This could result in injury and  
scalding or damage.  
Miele cannot be held liable for  
damage caused by non-compliance  
with these Warning and safety  
instructions.  
Clean the lava rocks regularly and  
~
replace them when necessary. Rocks  
which are saturated catch fire easily.  
The grill trough and the lava rock  
container should be cleaned after each  
use to keep them free of oil and fat.  
11  
Caring for the environment  
Disposal of the packing  
material  
Disposal of your old appliance  
Electrical and electronic appliances  
often contain materials which, if  
handled or disposed of incorrectly  
could be potentially hazardous to  
human health and to the environment.  
They are, however, essential for the  
correct functioning of your appliance.  
Please do not therefore dispose of it  
with your household waste.  
The transport and protective packing  
has been selected from materials which  
are environmentally friendly for  
disposal, and should be recycled.  
Ensure that any plastic wrappings,  
bags, etc. are disposed of safely and  
kept out of the reach of babies and  
young children. Danger of suffocation.  
Please dispose of it at your local  
community waste collection/recycling  
centre or contact your dealer for  
advice. Ensure that it presents no  
danger to children while being stored  
for disposal.  
12  
Before using for the first time  
Please stick the extra data plate for the  
appliance supplied with this  
documentation in the space provided in  
the "After sales service" section of this  
booklet.  
Cleaning for the first time  
^ Remove any protective foil and  
adhesive labels.  
^ Wash the grill trough and the rack in  
hot water with a little washing-up  
liquid, and dry thoroughly (see  
"Cleaning and care").  
^ Clean the other surfaces with a damp  
cloth, and then wipe dry.  
Metal components have a protective  
coating which may give off a slight  
smell when heated up for the first  
time. The smell and any vapours will  
dissipate after a short time, and do  
not indicate a faulty connection or  
appliance.  
13  
Operation  
Grill chart  
The times given in the table serve as a guide, based on a pre-heated grill at  
settings 9 to 12. The grilling time required will depend on the type of food, its  
texture and thickness as well as personal taste.  
Food  
Time in minutes  
Meat and sausages  
Sausages  
6 - 8  
4 - 10  
12 - 16  
16 - 18  
4 - 8  
Fillet steak  
Burgers  
Chicken drumsticks  
Lamb chops  
Liver  
3 - 6  
Turkey escalopes  
Kebabs  
8 - 10  
14 - 18  
8 - 12  
15 - 20  
10 - 20  
Cutlets/schnitzel  
Spare ribs  
T-bone steak  
Fish and seafood  
Trout  
12 - 16  
2 - 4  
Prawns  
Salmon steak  
Mackerel  
10 - 12  
10 - 12  
6 - 8  
Tuna fish steak  
14  
Operation  
Food  
Time in minutes  
Vegetables  
Aubergines  
6 - 8  
10 - 20  
5 - 6  
Jacket potatoes, pre-cooked  
Vegetarian kebabs  
Corn on the cob, pre-cooked  
Peppers, cut into strips  
Tomato halves  
Fruit  
5 - 8  
2 - 3  
2 - 4  
Pineapple slices  
Apple slices  
2 - 3  
2 - 3  
Miscellaneous  
Toast  
2 - 3  
4 - 6  
Tofu  
15  
Operation  
To prepare the grill  
Switching on and off  
The grill can be used with or without the The grill has 2 heating elements which  
lava rocks. Without the lava rocks the can be switched on and regulated  
rising steam keeps the food being independently. Both elements can be  
grilled moist. Grilling with the lava rocks used together when grilling large  
creates a particularly intensive aroma.  
quantities of food. For smaller  
quantities, the front element can be  
used to grill the food whilst the rear  
element can be used to keep food  
warm at settings 3 or 4.  
^ Check that the drain tap is closed.  
^ Remove the rack (or racks,  
depending on model), lift up the  
heating elements, and if not being  
used, take the lava rock container  
out.  
To switch the heating elements on or  
off, the appropriate control is turned in  
a clockwise or anti-clockwise direction.  
N lights up in the display after the  
appliance has been switched on, and  
goes out again once the grill has been  
switched off.  
^ Fill the grill trough  
– when grilling without lava rocks up  
to marker line a with  
approx. 2.5 litres of water (CS 1312)  
approx. 4.0 litres of water (CS 1322).  
– when grilling with lava rocks with  
approx. 1.2 litres of water (CS 1312)  
approx. 1.8 litres of water (CS 1322).  
^ If using lava rocks, put the container  
back in the grill trough.  
^ Lower the heating elements again,  
and put the rack back on it.  
16  
Operation  
Grilling  
Useful tips  
– Pat dry wet food with kitchen paper  
to absorb surplus moisture and avoid  
spitting.  
When grilling, keep an eye on the  
level of water in the trough. If  
necessary, add more water.  
– To prevent meat drying out, do not  
season with salt until after it has  
been cooked.  
When grilling or keeping food warm,  
do not use grill pans, griddles,  
saucepans or similar on the open  
grill, and never cover the rack(s)  
(e.g. with aluminium foil). The  
resulting build-up of heat could  
damage the rack(s).  
– Marinating often improves the flavour  
of food to be grilled.  
– Brush food that has not been  
marinated with a little oil. Only use  
oils that can be heated to a high  
temperature.  
– The grilling time for jacket potatoes  
and corn on the cob can be reduced  
by pre-cooking potatoes for 15-40  
minutes (depending on the size) and  
corn on the cob for 10-15 minutes.  
^ Turn one or both controls to setting  
"12".  
^ Pre-heat the grill with the rack(s) in  
place for approx. 10 minutes.  
Make sure the control(s) are set  
precisely to setting 12.  
After grilling  
If the controls are not set to the exact  
position, the heating will not work with  
maximum power.  
^ Switch off the appliance.  
^ Clean the grill after each use while it  
is still warm to the touch (see  
"Cleaning and care").  
^ Select the setting you require.  
^ After grilling check the appearance  
of the lava rocks. If they look dark,  
they are saturated with oil and must  
be cleaned or replaced.  
^ Turn the food once or more during  
grilling.  
17  
Safety features  
Overheating protection  
Safety switch-out  
A safety cut-out automatically switches  
the appliance off if the water level  
drops too low.  
A safety cut-out ensures that the grill  
elements only heat up when they are  
lying horizontally and not when they are  
raised up.  
^ Add some cold water.  
As soon as the appliance has cooled  
down, the heating elements switch  
back on again and you can continue  
grilling.  
18  
Cleaning and care  
To avoid damaging the stainless  
steel surfaces of your appliance, do  
not use:  
,Do not use a steam cleaning  
appliance to clean this appliance.  
The steam could reach the electrical  
components and cause a short  
circuit.  
– cleaning agents containing soda,  
alkalines, ammonia, acids or  
chlorides,  
Clean the appliance regularly,  
– cleaning agents containing  
descaling agents,  
preferably after each use. Allow the  
appliance to cool down to a safe  
temperature before cleaning. To avoid  
water marks and limescale deposits,  
use a soft cloth to dry surfaces that  
have been cleaned with water.  
– stain or rust removers,  
– abrasive cleaning agents, e.g.  
powder cleaners and cream  
cleaners,  
– solvent-based cleaning agents,  
– dishwasher cleaner,  
Abrasive cleaning agents and  
scouring sponges may only be used  
to clean the heating elements.  
– grill and oven cleaners,  
– glass cleaning agents,  
– hard, abrasive brushes or sponges,  
e.g. pot scourers, brushes or  
sponges which have been previously  
used with abrasive cleaning agents,  
– sharp pointed objects  
(these can damage the seal between  
the frame and the worktop).  
19  
Cleaning and care  
Stainless steel  
Heating elements  
The ceramic and stainless steel hob  
Use a scouring sponge to clean any  
cleaner is suitable for cleaning stainless residues left on the heating elements.  
steel surfaces (see "Optional  
accessories").  
Lava rocks  
To help prevent resoiling, we  
recommend a stainless steel  
conditioner (see "Optional  
accessories").  
Clean the lava rocks regularly.  
Soak them in a suitable container in hot  
water with a little washing-up liquid,  
then swirl them around in the water  
several times. Pour away the dirty  
water, and rinse 2 or 3 times in clean  
water. Lay the rocks out to dry on a  
suitable towel.  
Apply sparingly with a soft cloth.  
Do not use a stainless steel cleaning  
agent on printed surfaces. This  
would rub off the print. These areas  
should be only cleaned with an  
E-Cloth or with a solution of warm  
water and a little washing-up liquid  
applied with a soft sponge.  
Washing lava rocks removes the  
outer used layer. The speed with  
which the lava rocks wear down will  
depend on how often they are used  
and for how long.  
Rack and lava rock container  
If the lava rocks in the container are  
reduced by half, they should be  
replenished.  
Wash the rack and lava rock container  
after every use in hot water with a little  
washing-up liquid. If the rack is heavily  
soiled it should be soaked first and then  
any soiling can be removed using a soft  
brush.  
If the lava rock container is heavily  
soiled a non-abrasive stainless steel  
spiral pad can be used together with a  
little stainless steel cleaning agent.  
Leave to dry thoroughly after cleaning  
them.  
Do not use conditioning agents for  
stainless steel in the lava rock  
container.  
20  
Cleaning and care  
Grill trough  
Ensure that the underside of the  
appliance is always easily  
Clean the grill trough after each use.  
accessible for draining water.  
^ After grilling, allow the water in the  
trough to cool down before draining  
it.  
Always wait until the water has  
cooled down before draining to  
avoid the danger of being scalded.  
^ Place a container large enough to  
take the contents of the trough under  
the drain.  
^ Open the drain tap under the grill by  
turning it anti-clockwise a.  
^ Once the water has all drained, turn  
off the tap by turning it clockwise b  
as far as it will go.  
^ Wash the grill trough after every use  
with hot water and a little washing-up  
liquid. If it is heavily soiled a  
non-abrasive stainless steel spiral  
pad can be used together with a little  
stainless steel cleaning agent.  
^ Drain the suds solution into a suitable  
container and then clean the drain  
outlet with a bottle brush. Rinse with  
hot water, and then wipe the grill  
trough and the drain dry.  
Never use a conditioning agent for  
stainless steel on the grill trough.  
21  
Problem solving guide  
What to do if...  
Installation work and repairs to  
electrical appliances must only be  
carried out by a suitably qualified  
and competent person in strict  
accordance with current local and  
national safety regulations (BS 7671  
in the UK). Repairs and other work  
by unqualified persons could be  
dangerous. The manufacturer  
cannot be held liable for  
... after switching on, the appliance  
does not heat up.  
Check whether  
– the overheating protection  
mechanism has been activated.  
Proceed as described in  
"Overheating protection".  
– the mains fuse has tripped. If it has,  
contact a qualified electrician or the  
Miele Service Department.  
unauthorised work.  
... the food does not begin to brown  
when the appliance has been  
pre-heated at setting "12" for 10  
minutes.  
Check that the control marker is exactly  
at setting "12". If it between settings "12"  
and "0", the grill heats at a lower power  
setting.  
22  
Optional accessories  
Miele offers a range of useful accessories designed for your  
appliance.  
These can be ordered via the internet at  
contact details) or from your Miele dealer.  
Griddle CSGP 1300  
Cast-iron griddle to place on top of the CS 1312 grill,  
with a flat and a fluted side  
Griddle CSGP 1400  
Cast-iron griddle to place on top of the CS 1322 grill,  
with a flat and a fluted side  
Wire frame for griddle CSPG 1300  
Wire frame for griddle CSPG 1400  
Handle  
23  
Optional accessories  
Cleaning and care products  
Ceramic and stainless steel hob cleaner 250 ml  
Removes heavy soiling, limescale deposits and light  
discolouration  
Stainless steel conditioning agent 250 ml  
Removes water marks, flecks and finger prints.  
Helps keep the appliance looking good for longer.  
E-Cloth (microfibre cloth)  
Removes finger marks and light soiling.  
24  
Safety instructions for installation  
Observe carefully the safety  
~
distances given on the following pages.  
Fit the wall units and extractor hood  
before fitting the barbecue grill to  
avoid damaging the surface.  
Do not use any sealant except  
~
where expressly instructed to do so.  
The seal underneath the appliance  
provides a sufficient seal for the  
worktop.  
The veneer or laminate coatings of  
~
worktops (or adjacent kitchen units)  
must be treated with 100 °C  
heat-resistant adhesive which will not  
dissolve or distort.  
All dimensions in this instruction booklet  
are given in mm.  
Any backmoulds must be of  
heat-resistant material.  
This appliance may only be used in  
~
mobile installations such as ships, if a  
risk assessment has been carried out  
by a suitably qualified engineer.  
The barbecue grill must not be  
~
installed directly next to a  
salamander (CS 1421). It is essential to  
maintain a distance of at least 150 mm  
between these two appliances.  
After installing the grill, ensure that  
~
the connection cable is without  
hindrance and that there is no  
mechanical obstruction which could  
damage it, e.g. when draining the  
appliance.  
Ensure that the electrical cable is  
~
installed in such a way that it does not  
touch any parts of the appliance which  
become hot. The cable will be  
damaged by extreme heat.  
25  
Safety instructions for installation  
Safety distance above the grill  
When two or more appliances are  
installed together below a cooker hood,  
e.g. a grill and an induction hob  
combiset, which have different safety  
distances given in the installation  
instructions, you should select the  
greater distance of the two.  
A minimum safety distance must be  
maintained between the hob and the  
cooker hood above it. See the cooker  
hood manufacturer’s operating and  
installation instructions for details.  
If the manufacturer’s instructions are  
not available for the cooker hood, then  
a minimum safety distance of at least  
760 mm must be maintained. For any  
flammable objects, e.g. utensil rails,  
wall units etc, a minimum distance of at  
least 760 mm must be maintained  
between them and the appliance  
below.  
26  
Safety instructions for installation  
Safety distances to the sides of the  
grill  
Ideally the grill should be installed with  
plenty of space on either side. There  
may be a wall at the rear and a tall unit  
or wall at one side. On the other side,  
however, no unit or divider should  
stand higher than the built-in appliance  
(see illustrations).  
Due to the high temperatures radiated  
by the grill, it is essential that a  
minimum distance of 50 mm is  
maintained between the worktop  
cut-out and the back wall.  
Recommended  
The minimum distance a between the  
worktop cut-out and a wall or tall unit to  
the right or left of it is:  
40 mm for CS 1212  
CS 1221  
CS 1234  
CS 1223  
50 mm for CS 1112  
CS 1122  
Not recommended  
CS 1134  
CS 1326  
CS 1411  
100 mm for CS 1012  
CS 1013  
150 mm for CS 1421  
CS 1312  
CS 1322  
200 mm for CS 1034  
250 mm for CS 1011  
CS 1018  
CS 1021  
Not allowed  
27  
Safety instructions for installation  
Safety distance when installing the appliance near a wall with additional  
niche cladding  
A minimum safety distance must be maintained between the worktop cut-out and  
any niche cladding to protect it from heat damage.  
If the niche cladding is made from a combustible material (e. g. wood) a  
minimum safety distance e of 50 mm must be maintained between the cut-out  
and the cladding.  
If the niche cladding is made from a non-combustible material (e. g. metal,  
natural stone, ceramic tiles) a minimum safety distance e of 50 mm less the  
thickness of the cladding must be maintained between the cut-out and the  
cladding.  
Example: 15 mm niche cladding  
50 mm - 15 mm = minimum safety distance of 35 mm  
aMasonry  
bNiche cladding  
Dimension x = thickness of niche cladding material  
cWorktop  
dWorktop cut-out  
eMinimum safety distance  
for combustible materials is 50 mm  
for non-combustible materials is 50 mm less dimension x  
28  
Appliance and building-in dimensions  
CS 1312  
aSpring clamps  
bFront  
cCasing depth  
dCasing depth plus depth of mains connection box with mains connection cable,  
L = 2,000 mm  
eDrain tap  
29  
Appliance and building-in dimensions  
CS 1322  
aSpring clamps  
bFront  
cCasing depth  
dCasing depth plus depth of mains connection box with mains connection cable,  
L = 2,000 mm  
eDrain tap  
30  
Preparing the worktop  
^ Make the worktop cut-out for one or  
more appliances as applicable.  
Remember to maintain a minimum  
safety distance from the back wall,  
as well as from any tall unit or side  
wall to the right or left of the  
appliance(s).  
See "Safety instructions for  
installation".  
^ Seal the cut surfaces with a suitable  
heat-resistant sealant to avoid  
swelling caused by moisture.  
If, during installation, you find that the  
seals on the corners of the frame are  
not flush with the worktop surface,  
the corner radius (ß R4) can be  
carefully scribed to fit.  
31  
Installation of several appliances  
When installing two or more appliances next to each other a spacer bar b must  
be used between each one.  
See "Fixing the spring clamps and spacer bars".  
Worktop cut-out  
- two appliances  
Worktop cut-out  
- three appliances  
To calculate the cut-out width (D) required:  
Add up the widths of each appliance (e.g. width A + B + C etc.) and subtract  
16 mm from this figure  
(i.e. 8 mm is taken off either end of the appliance run).  
Number of  
appliances  
Appliance width in mm Worktop cut-out in mm  
1
2
2
3
3
288  
288 - 16 = 272  
288, 288  
288 + 288 - 16 = 560  
288 + 380 - 16 = 652  
288 + 288 + 288 - 16 = 848  
288 + 288 + 380 - 16 = 940  
288, 380  
288, 288, 288  
288, 288, 380  
32  
Installation of several appliances  
aSpring clamps  
bSpacer bars  
cGap between spacer bar and worktop  
dSealing strip  
The illustration shows a worktop cut-out with spring clamps a and spacer bars b  
for 3 appliances.  
An additional spacer bar is required for each additional appliance. The position  
for securing each additional spacer bar will depend on the width of appliance B  
(288 mm / 380 mm / 576 mm).  
33  
Fixing the spring clamps and spacer bars  
Wooden worktops  
^ Position the spring clamps supplied  
a and spacer bars b on the top  
edge of the cut-out in the positions  
marked.  
^ Secure the spring clamps and  
spacer bars with the 3.5 x 25 mm  
screws supplied.  
34  
Fixing the spring clamps and spacer bars  
Granite and marble worktops  
The screws are not required for  
granite or marble worktops.  
^ Apply silcone to the side edges and  
the lower edges of the spring clamps  
a and spacer bars b.  
^ Then fill gap e between the spacer  
bars and the worktop with silicone  
from the tube supplied.  
^ Position and secure the spring  
clamps a and spacer bars b using  
strong, double-sided adhesive tape  
c.  
35  
Installing the appliance(s)  
^ Feed the connection cable down  
^ Starting at the front, position the next  
through the cut-out.  
appliance in the worktop cut-out.  
^ Starting at the front, position the  
^ Connect each appliance to the mains  
appliance in the worktop cut-out.  
(see "Electrical connection").  
^ Using both hands, press down  
evenly on the sides of the appliance  
until it clicks into position. When  
doing this make sure that the seal  
under the appliance sits flush with  
the worktop on all sides. This is  
important to ensure an effective seal  
all round. Do not use sealant.  
^ Check that each appliance works  
correctly.  
Once installed, the hob can be  
removed using a special tool.  
It can also be pushed up out of the  
cut-out from below. It must be  
pushed up from the back first.  
When installing several appliances, a  
sealing strip must be fitted into each  
spacer bar.  
^ Push the appliance to the side until  
the long slots in the spacer bar can  
be seen.  
^ Fit the sealing strip d into the long  
slots in the spacer bar b.  
36  
General installation tips  
Tiled worktop  
Do not use any sealant unless  
expressly instructed to do so. The  
sealing strip under the edge of the top  
part of the appliance provides a  
sufficient seal for the worktop.  
Grout lines a and the hatched area  
underneath the appliance must be  
smooth and even. If they are not, the  
appliance frame will not sit flush with  
the worktop and the sealing strip will  
not provide a good seal between the  
appliance and the worktop.  
Do not use sealant between the  
frame of the top part of the  
appliance and the worktop.  
This could cause difficulties if the  
appliance ever needs to be taken  
out for servicing and possibly result  
in damage to the frame or the  
worktop.  
37  
Electrical connection  
Connection should be made via a fused  
plug and switched socket or a double  
pole fused spur connection unit, or a  
suitable isolator (as appropriate) which  
complies with national and local safety  
regulations and the on/off switch should  
be easily accessible after the appliance  
has been built in.  
All electrical work should be carried  
out by a suitably qualified and  
competent person in strict  
accordance with current local and  
national safety regulations (BS 7671  
in the UK).  
If the connection cable is damaged,  
it must be replaced by a suitably  
qualified electrician with a special  
connection cable of type H 05 V V-F  
(pvc insulated), available from Miele.  
If the switch is not accessible after  
installation (depending on country) an  
additional means of disconnection must  
be provided for all poles.  
For extra safety it is advisable to install  
a suitable residual current device  
(RCD).  
Installation, repairs and other work  
by unqualified persons could be  
dangerous. The manufacturer  
cannot be held liable for  
When switched off there must be an  
all-pole contact gap of at least 3 mm in  
the isolator switch (including switch,  
fuses and relays).  
unauthorised work.  
Ensure power is not supplied to the  
appliance until after installation or  
repair work has been carried out.  
Important U.K.  
The appliance is supplied for  
connection to a 230-240 V, 50 Hz  
supply with a 3-core cable.  
The appliance must only be  
operated when built-in. This is to  
ensure that all electrical parts are  
shielded. Live parts must not be  
exposed.  
The wires in the mains lead are  
coloured in accordance with the  
following code:  
Green/yellow = earth  
Do not connect the appliance to the  
mains electricity supply by an  
extension lead. These do not  
guarantee the required safety of the  
appliance.  
Blue  
= neutral  
= live  
Brown  
WARNING  
Please make sure that the connection  
data quoted on the data plate match  
the household mains supply.  
THIS APPLIANCE MUST BE  
EARTHED  
38  
Electrical connection  
Important  
The electrical safety of this appliance  
can only be guaranteed when  
continuity is complete between the  
appliance and an effective earthing  
system, which complies with local and  
national regulations. It is most important  
that this basic safety requirement is  
present and tested regularly and if  
there is any doubt the electrical wiring  
in the home should be inspected by a  
qualified electrician. The manufacturer  
cannot be held liable for the  
consequences of an inadequate  
earthing system such as an electric  
shock.  
The manufacturer cannot be held  
liable for damage which is the direct  
or indirect result of incorrect  
installation or connection.  
39  
After sales service, data plate  
In the event of any faults which you cannot remedy yourself, or if the appliance is  
under guarantee, please contact:  
– Your Miele dealer, or  
– the Miele Customer Contact Centre (see back cover for address).  
Please note that telephone calls may be monitored and recorded to improve  
our service.  
When contacting Miele, please quote the model and serial number of your  
appliance which are given on the data plate.  
N.B. A call-out charge will be applied for service visits where the problem  
could have been resolved as described in these instructions.  
Space in which to stick the extra data plate supplied with the appliance. Ensure  
that the model number is the same as the one on the front of these instructions.  
40  
41  
42  
43  
Alteration rights reserved/ 2110  
M.-Nr. 07 180 420 / 09  

JVC AV 32X35HKE User Manual
KitchenAid KFGU706VSS00 User Manual
LG Electronics LG Life Good Computer Monitor IPS236V User Manual
LG Electronics MW 71PY10G User Manual
LG Electronics RH2T160 User Manual
Miele KM5956 User Manual
MSi G45 User Manual
NEC Electronics America Computer Monitor LCD72VX User Manual
Philips 21PT5221 User Manual
Philips MB4010T001 User Manual