Philips MB4010T001 User Manual

1
E
N
MB4010T001  
AutoScan Color Monitor  
English  
Operating Instructions...... 2 - 13  
Mode d'emploi ……………14 - 25  
Français  
Appendix  
English  
Declaration FCC  
... A1  
Information for Users in the U.S. ... A3  
Warranty  
... A5  
Deutsch  
Français  
Hinweis / GS  
Achtung  
... A4  
... A6  
Declaration FCC  
... A2  
For Customer Use:  
Enter below the Serial No. which is located on the  
back of the cabinet. Retain this information for  
future reference.  
Model No. MB4010T001  
Serial No.  
CAUTION  
RISK OF ELECTRICAL SHOCK  
DO NOT OPEN  
ATTENTION  
RISQUE DE CHOC ELECTRIQUE  
NE PAS OUVRIR  
CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER(OR BACK)  
NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL  
This "bolt of lightning" indicates that uninsulated material  
within your unit may cause an electrical shock. For the safety  
of everyone, do not remove product covering.  
This "exclamation point" calls attention to a feature for which  
you should read the enclosed literature carefully to prevent operating  
and maintenance problems.  
3
E
N
Note: If you experienced your monitor display is changing from color  
to mono, it's possible that you are using a non-VESA-DDC-standard  
video card. Please consult with your local Philips dealer for more  
information.  
As an Energy Star Partner, MAGNAVOX, has determined that this  
product meets the Energy Star guidelines for energy efficiency.  
IBM, IBM PC and Power PC are registered trademarks of International  
Business Machines Corporation.  
4
E
N
Safety precautions and maintenance  
N Disconnect the monitor from the mains supply if the monitor is not  
to be used for an extended period of time.  
N Do not attempt to remove the back cover, as you will be exposed to  
a shock hazard. The back cover should only be removed by qualified  
service personnel.  
N Do not place objects on top of the monitor cabinet, which could fall  
into vents or which could cover them and prevent proper cooling of  
the monitors electronic devices.  
N
Do not expose the monitor to rain or excessive moisture to avoid the  
risk of shock or permanent damage to the set.  
N Do not use alcohol or ammonia based liquid to clean the monitor. If  
necessary, clean with a slightly damp cloth. Disconnect the monitor  
from the mains supply before cleaning.  
N Consult a service technician if the monitor does not operate normally  
when operating instructions of this manual are followed.  
Package  
Your package includes the following items:  
The monitor  
Pedestal  
Power cord  
Interface cable (flying-in)  
End of life disposal  
Your new set contains materials which can be recycled and reused.  
Specialized companies can recycle your product to increase the amount  
of reusable materials and to minimize the amount of materials to be  
disposed of.  
Please inform yourself on local regulations on disposal of your old set.  
5
E
N
Installation  
Important: Please refer to the users manuals of your computer and  
video adapter to make sure these equipments are properly installed  
and configured before installing the monitor.  
Positioning / Ventilation  
N Avoid exposing the monitor to direct sunlight, stoves or any other  
heat sources.  
N To prevent overheating, make sure that the ventilation openings of  
the monitor are not covered.  
N Keep moisture and dust away.  
N Keep away from any magnetic objects, such as speakers, electric  
motors, transformers, ...etc.  
N When positioning this monitor, make sure that the mains plug and  
socket are easily accessible.  
Pedestal  
With the built-in pedestal you can tilt and / or swivel the monitor for a  
most comfortable viewing angle.  
To fit the pedestal, refer to the illustration on the inside back-cover of  
this manual.  
6
E
N
Connection  
Important: Please make sure the AC power to your computer is  
OFFbefore connecting or disconnecting any display peripheral.  
Failure to do so may cause serious personal injury as well as  
permanent damage to your computer equipments.  
Intel Based platform: 386, 486, Pentium, or other compatibles:  
Connect the monitor to the computer using the supplied interface  
cables.  
Monitor rear view  
1) IBM PC connection  
2) Mains connection  
VIDEO IN  
VIDEIN  
2
1
7
E
N
Connection to the mains  
(Rear of the monitor)  
VIDEO IN  
(Mains cord)  
Connecting to the mains  
This monitor is set to operate at a mains supply of 100-240 volts AC .  
If the mains voltage in your home is not between this, consult your  
dealer.  
Connect one end of the mains cord to the mains socket at the rear of  
monitor, and the other end to the mains supply.  
The monitor will be operating in power saving mode if you switch on  
your monitor without signal input from PC. (Please refer to Power  
Management Signalling instruction.)  
8
E
N
Front Control locations and functions  
For an optimized adjustment of the picture following controls are  
available at the front.  
POWER.  
Press this knob, the green LED lights and the power is ON.  
Press this knob again, the green LED disappears and the power  
is OFF.  
CONTRAST  
Used to adjust the picture contrast level.  
BRIGHTNESS  
Used to adjust the overall screen brightness as a compensation  
for ambient light.  
"+" or "-"  
Press "+" or "-" to adjust the selected function.  
9
E
N
The function pads:  
H-Shift : to adjust the horizontal position of the image.  
H-Size : to adjust the horizontal amplitude of the image.  
V-Shift : to adjust the vertical position of the image.  
V-Size : to adjust the vertical amplitude of the image.  
SHIFT key  
To select the level of function.  
"Shift" LED off - Control is on first level  
"Shift" LED on - Control is on second level  
Second level of the function pads:  
Trapezoid : to correct the trapezoid distortion of the  
image.  
Pincushion : to correct the barrel distortion of the image  
Recall  
: to recall original factory preset mode  
Remarks:  
1. When pressing any function pad, the "Shift" LED will flash  
once to indicate the function has been selected.  
2. Once the limit of the adjustable range has been reached,  
the shift LED will flash continuously.  
10  
E
N
Adjustment  
The monitor is pre-set with 8 modes for optimal display size and centering  
as indicated in the following table:  
Resolution Horizontal Vertical  
Mode  
VGA  
VGA  
VGA  
VESA/ 75 640 x 480  
VESA/ 60 800 x 600  
VESA/ 75 800 x 600  
VESA/ 60 1024 x 768  
VESA/ 85 800 x 600  
(dots x lines) Freq.(KHz) Freq.(Hz)  
Remark  
640 x 350  
640 x 400  
640 x 480  
31.5  
31.5  
31.5  
37.5  
37.8  
46.9  
48.3  
53.7  
70  
70  
60  
75  
60  
75  
60  
85  
Non-interlaced  
Non-interlaced  
Non-interlaced  
Non-interlaced  
Non-interlaced  
Non-interlaced  
Non-interlaced  
Non-interlaced  
(A) User mode: (15 modes)  
The set will save the user's setting parameters automatically.  
After 10 seconds of key-pad inactivity, the LED will flash twice to  
indicate the parameters being saved.  
11  
E
N
(B) Power Management Signalling  
Power Management Definition  
VESA DPMS  
POWER SAVING STATES  
MODE  
VIDEO H-SYNC V-SYNC  
POWER USED POWER SAVING(%)  
ON  
Active  
Yes  
No  
Yes  
No  
Yes  
Yes  
No  
No  
< 70 Watts  
< 15 Watts  
< 15 Watts  
< 8 Watts  
0 %  
> 82 %  
> 82 %  
> 94 %  
Stand-by Blanked  
Suspend Blanked  
OFF  
Blanked  
Note: The video will be blanked and the power LED color will change  
into following colors whenever the monitor goes into power  
management status.  
Green LED light  
Yellow LED light  
Amber LED light  
- "Normal" operation  
- "Stand by" or "Suspend" mode  
- "OFF" mode  
This monitor is Energy Star compliant when used with  
a computer equipped with DPMS.  
As an Energy Star Partner, MAGNAVOX, has determined that this  
product meets the Energy Star guidelines for energy efficiency.  
Remark:  
The transition time from "on" mode to any power down mode  
will take around 5 seconds.  
The recovery time from "stand by" or "suspend" mode to "ON"  
mode will take around 3 seconds.  
12  
E
N
Technical information  
(I) General:  
Picture tube  
: 14 inch (35.5 cm), 90° deflection, non-  
glare, black matrix,light transmission  
57%, phosphor P22 medium short,  
dotted pitch 0.28 mm.  
Screen area  
Recommended Display Area: 250 mm (H) x 188 mm (V)  
Maximum Display Area : 274 mm (H) x 201 mm (V)  
Line (Horizontal) frequency : 30 - 54 KHz (automatically)  
Raster (Vertical) frequency : 50 - 110 Hz (automatically)  
Mains voltage  
: 100 - 240 VAC , 60 - 50 Hz  
(automatically)  
Power consumption  
Maximum dot rate  
Video input signal  
Sync type  
: 70 watt nominal, 90 watt max.  
: 65 MHz  
: 0.7 Vp-p linear / 75 Ohm  
: Separate H,V, TTL level  
: Positive or Negative  
Sync Polarity  
Pedestal  
: Tilt - 5° forward, 13° backward;  
swivel - 90° leftward or rightward.  
Unit dimension (W x H x D)  
Net weight  
:
356 x 370 x 382 mm  
: 10.6 Kg  
Operating condition  
Temperature  
Humidity  
: 0° C to 40° C  
: 20% to 80%  
Storage condition  
Temperature  
Humidity  
: -25° C to 70° C  
: 20% to 95%  
DDC1/ DDC2B  
: VESA standard  
(II) Compatibility:  
. Intel based platform (386, 486, Pentium) and other compatibles.  
. VESA Guide lines and Standards.  
13  
E
N
(III) Pin assignment:  
1
6
11  
5
10  
15  
(1)  
(1) The 15-pin D-sub connector (male) of the signal cable (IBM systems):  
Pin No. Assignment  
Pin No. Assignment  
1
2
3
4
Red video input  
9
10  
11  
No pin  
Logic ground  
Green video input  
Blue video input  
Identification output  
- Connected to pin 10  
Ground  
Red video ground  
Green video ground  
Blue video ground  
Identification output  
- connected to pin 10  
Serial data line (SDA)  
H. Sync  
V. Sync (VCLK for DDC)  
Data clock line (SCL)  
12  
13  
14  
15  
5
6
7
8
N Because of a policy of continuous product improvement, the above  
specifications are subject to change without notice.  

IBM 31P6241 User Manual
Indesit PI 640 A GB User Manual
Lenovo 9344 User Manual
Lenovo LT2252P User Manual
Moffat Blue Seal Evolution Series E514B LS User Manual
NEC Electronics America Computer Monitor MultiSync EA224WMi User Manual
NEC NLT 37HD1 User Manual
NextBase TV700 User Manual
Philips 105S69 User Manual
Philips 190G6 User Manual