PANEL LAYOUT
Cable Box Connections
Return yourWarranty Registration card today to
ensure you receive all the you’re entitled to.
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a
MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your pur-
chase at once.And take advantage of these important benefits.
Basic Antenna Connection
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
USER MANUAL
1
2
benefits
Panel
Sequence
and
MODEL
REGISTRATION
INFORMATION
PA1NEL PA2NEL
SAFETY
INFO
f you cable signal uses a cable box or
Idecoder, follow the easy steps below to
complete the connection.
combination antenna receives normal
COVER
Cable Signal IN
from the Cable
Company
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of
its cabinet design.
Abroadcast channels (VHF 2-13 and
UHF 14-69). Your connection is easy
since there is only one 75Ω (ohm)
antenna plug on the back of your TV -
and that’s where the antenna goes.
If your antenna has a round
Panel Index
Keep these instructions.
Color Television
Side 1
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsus-
pectingly fall from the top of the set and cause product damage
and/or personal injury.
Cable Box (w/RF In/Outputs):
This connection will be mono.
Connect the Cable Company
PA3NEL PA4NEL PA5NEL PA6NEL PA7NEL PA8NEL
13MT143S
13MT1532
13MT1533
20MT133S
20MS233S
Warranty
Owner
Model
2
1
IR
VIDEO
IN OUT
AUDIO IN
SPDIF
Verification
Confirmation
Registration
R
L
CABLE
IN
S-VIDEO
DVD-D OUT
supplied cable to the signal
IN(put) plug on the back of the
TO
TV/VCR
Registering your product
within 10 days confirms your
right to maximum protection verification of ownership in
Your completed Warranty
Registration Card serves as
Returning your Warranty
Registration Card right away
guarantees you’ll receive all
cable (75 ohm) on the end, then
1
AUDIO OUT
Y
Pb
Pr
OPTICAL
SPDIF
USB
TV
PASSCARD
1
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
75Ω
PANEL PANEL PANEL PANEL PANEL
PA9NEL 10 11 12 13 14
you're ready to connect it to the
Cable Box.
TV. Go to step 2.
8.
9.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
18. Wall or Ceiling Mounting - The appliance should be mount-
ed to a wall or ceiling only as recommended by the manufacturer.
Jack Panel Back of Cable Box
Rear of TV
Using a separate round coaxial
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter (not supplied with
TV).
under the terms and condi-
tions of your MAGNAVOX
warranty.
the event of product theft or the information and special
cable, connect one end to the
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and third grounding prong.
The wide blade or third prong are provided for your safety.When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
19. Power Lines - An outdoor antenna should be located away from
2
3
loss.
offers which you qualify for
as the owner of your model.
OUT(put) (TO TV) plug on
the back of the Cable Box.
power lines.
3
PANEL PANEL
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an anten-
na discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure below.
PANEL PANEL PANEL PANEL
Connect the other end of the
Side 2
Know these
19 20
15 16 17 18
round coaxial cable to the 75Ω
75Ω
safetysymbols
75Ω
Congratulations on your
purchase, and welcome to
the “family!”
Twin Lead
Wire
input on the back of the television.
Push the round end of the
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Thank you for choosing Magnavox.
Round 75Ω
Coaxial Cable
Screw it down finger tight.
adapter or antenna cable onto
2
Jack Panel Back of TV
PANEL PANEL PANEL PANEL PANEL PANEL
75Ω
Round Cable 75Ω
the 75Ω jack on the rear of the
NOTE: If applicable, set the OUTPUT
CHANNEL SWITCH on the back of the
cable box to CH 3 or 4. Tune the TV to
the same channel and change channels
at the cable box. In some cases, the
cable box will automatically tune to
either channel 3 or 4, change channels
until the picture appears.
21 22 23 24 25 26
TV. If the round end of the
antenna cable is threaded, screw
it down tight.
Need help fast?
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appara-
tus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Dear MAGNAVOX product owner:
Thank you for your confidence in MAGNAVOX.
You’ve selected one of the best-built, best-
backed products available today.We’ll do every-
thing in our power to keep you happy with
your purchase for many years to come.
As a member of the MAGNAVOX “family,”
you’re entitled to protection by one of the
most comprehensive warranties and outstand-
ing service networks in the industry.
What’s more, your purchase guarantees you’ll
receive all the information and special offers for
which you qualify, plus easy access to acces-
sories from our convenient home shopping
network.
This “bolt of lightning” indicates uninsu-
lated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
PANEL PANEL PANEL PANEL PANEL PANEL
t
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.comply with recommended international global safety
standards for tilt and stability properties of its cabinet design.
27 28 29 30 31 32
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
Basic CableTV Connection
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materi-
als may be regulated due to environmental considerations. For dispos-
al or recycling information, please contact your local authorities or
PANEL INDEX
The “exclamation point” calls attention
22. Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
f Cable TV signal into your home is a
Isingle cable (75 ohm) the connection
to the TV is easy.
s
to features for which you should read
Subject
Panel No. Subject
Panel No.
the enclosed literature closely to prevent
Alternate Channel . . . . . . . . . . . . . . . . . .26 Picture Menu Controls . . . . . . . . . . . . . .11
Antenna Basic Connection . . . . . . . . . . . .1 Remote Batteries . . . . . . . . . . . . . . . . . . . .4
Front Audio/Video Input Jacks . . . . . . . . .3 Remote Control Button Descriptions .5-6
Automatically Program TV . . . . . . . . . . . .9 Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . .22
Basic Cable Connection . . . . . . . . . . . . . .1 SmartLock™ Controls
Read your User Manual first for quick tips that make using
your Magnavox product more enjoyable. If you have read
your instructions and still need assistance you may access our
online help at
operating and maintenance problems.
Connect the Cable TV cable
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
directly to the 75Ω jack on the
1
TV.
75Ω
16. Damage Requiring Service - The appliance should be serv-
Basic Remote Operation . . . . . . . . . . . . . .4
Basic Television Operation . . . . . . . . . . . .4
Cable Box Connection . . . . . . . . . . . . .1-2
Cable TV Control (Tuner Mode) . . . . . . .8
Care and Cleaning . . . . . . . . . . . . . . . . . .28
Channel Edit . . . . . . . . . . . . . . . . . . . . . .10
Closed Caption Control . . . . . . . . . . . . .21
Access Code . . . . . . . . . . . . . . . . . . . . .15
Block Channels . . . . . . . . . . . . . . . . . . .16
Blocking/Clearing All Channels . . . . . . .17
Movie Ratings . . . . . . . . . . . . . . . . . . . .18
Other Blocking Options . . . . . . . . . . . .20
TV Ratings . . . . . . . . . . . . . . . . . . . . . . .19
Understanding SmartLock™ . . . . . . . .14
Rear of TV
iced by qualified service personnel when:
Example of Antenna Grounding
Cable TV Signal
or
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome-and
thanks for investing in a MAGNAVOX product.
A.
The power supply cord or the plug has been damaged; or
Objects have fallen, or liquid has been spilled into the appli-
ance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally or
exhibits a marked change in performance; or
The appliance has been dropped, or the enclosure damaged.
as per NEC - National Electric Code
Helpful Hints
call 1-800-705-2000
B.
while with your product.
If no Video Signal is present, the TV
will shut itself off in about 10 min-
utes. If the TV is tuned to the AV
channel and there is no Video Signal
present, the screen will remain black.
C.
D.
Helpful Hints
GROUND CLAMP
ANTENNA LEAD IN WIRE
If no Video Signal is present, the TV
will shut itself off in about 10 minutes.
If the TV is tuned to the AV channel
and there is no Video Signal present,
the screen will remain black.
For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
Model No. ________________________
Serial No. ________________________
E.
P.S. Remember, to get the most from
your MAGNAVOX product, you must
return yourWarranty Registration Card
within 10 days. So please mail it to us
right now!
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
Factory Service Locations . . . . . . . . .30-31 SmartPicture™ Control . . . . . . . . . . . . .23
Format Control . . . . . . . . . . . . . . . . . . . .13 SmartSound™ Control . . . . . . . . . . . . . .24
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .29 SmartSurf . . . . . . . . . . . . . . . . . . . . . . . .25
Language Control . . . . . . . . . . . . . . . . . . .7 Troubleshooting . . . . . . . . . . . . . . . . . . .27
Limited Warranty . . . . . . . . . . . . . . . . . .32
Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
RF Coaxial
Cable 75Ω
75Ω
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
Use Auto Program as described on
panel 9 to set up channels that are
available in your area. Use the CH +/–
buttons to scan available channels.
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
TM
TM
TM
SmartPicture , SmartSound , and SmartLock are regis-
tered trademarks of Philips Consumer Electronics North
America. Copyright © 2003 Magnavox. All rights reserved.
IB8470E001
HOW TO USE THE TUNER MODE CONTROL
Description of Remote Control Buttons (Cont’d)
How to Use the Language Control
Description of Remote Control Buttons
Front AV (Audio/Video) Input Connections
BasicTV and Remote Control Illustrations
Television
4
3
5
6
7
8
Mono Devices
he TUNER MODE control allows you
udio and Video Front Inputs are avail-
or our Spanish speaking TV owners
Fan on-screen LANGUAGE option is
present. With the LANGUAGE control
you can set the TV’s on-screen menu to
be shown in either English or Spanish.
Press the MENU button on
the remote to show the on-
Tto change the TV’s signal input to
either ANTENNA, CABLE, or AUTO
mode. It’s important for the TV to know
what type of signal that is connected.
(From a Cable TV signal or a normal
Antenna signal.) In the AUTO mode,
when the AUTO PROGRAM feature is
activated, the TV will automatically
choose the correct mode.
Aable for a quick connection of a VCR,
to playback video from a camera, or
attach a gaming device. Use the AV but-
ton on the remote control to tune these
inputs.
Main
Picture
Main
Picture
Brightness
Color
Press POWER to turn on the
Brightness
Color
Connect
headphones
(not sup-
plied) to the
; jack.
NUMBER Buttons
POWER button
Press to turn the TV on or off.
Sound
Features
Install
POWER
CH
POWER
1
4
2
5
8
0
3
6
1
4
2
5
8
0
3
6
Sound
Features
Install
TV.
Picture
Sharpness
Tint
Main
Picture
1
2
Press the Number buttons to select TV
channels or to enter values in the menu.
For single-digit channels, press the
Number button for the channel you
want. The TV will pause briefly before
going to the chosen channel.
Picture
Sharpness
Tint
Main
Picture
Language
Language
Press VOLUME + to increase
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
More...
the sound level. Press VOLUME
More...
CH
CH(annel) +/– Buttons
Press to scan memorized channels.
MENU
MENU
–
to lower the sound level.
Connect the video (yellow)
VIDEO
AUDIO
ó
VOLUME
+
CHANNEL
POWER
DEO
AUDIO
ó
V
O
L
U
M
E
+
CHANNEL
POWER
1
2
Press both buttons at the
same time to display the TV’s
on-screen menu. Once in the
menu, use these buttons to make
menu adjustments or selections.
Press CHANNEL ;8 or 9 to
select TV channels.
screen menu.
cable from the Video output on
1
Front Jack panel of TV
CH
CH
the Camera (or accessory device)
to the Video (yellow) Input locat-
ed on the FRONT of the TV.
7
9
7
9
8
Press the CURSOR UP
MENU
MENU
8
POWER
CH
1
4
2
5
8
0
3
VOL(ume) +/– Buttons
Press to increase or decrease the
sound.
1
4
2
5
8
0
3
6
9
POWER
CH
or DOWN
buttons to
VIDEO
AUDIO
ó
VOLUME
+
CHANNEL
POER
VIDEO
AUDIO
ó
VOLUME
+
CHANNEL
POWER
Press the MENU button on
the remote to show the on-
screen menu.
6
Install
scroll through the on-screen
menu until the word
INSTALL is highlighted.
Press the CURSOR RIGHT
button to display the
INSTALL menu features.
A/CH Button
Install
Non-Stereo
models (white
AUDIO IN jack)
A/CH
CC
VOL
VOL
A/CH
CC
VOL
VOL
Language
English
3
CH
2
7
9
Language
English
1
2
(Alternate Channel)
Press to switch between the last channel
and the present channel.
Details are on panel 26.
1
CH
Tuner Mode
Auto Program
Channel Edit
Antenna
For Mono Devices: Connect
7
Remote
Sensors
(point
remote
here)
Tuner Mode
Auto Program
Channel Edit
Connect an acces-
sory device to the
AUDIO/VIDEO IN
jacks.
A/CH
CC
VOL
VOL
one end of the audio cable from
A/CH
CC
VOL
VOL
Yellow
Video
cable
2
White
6
8
Press the CURSOR UP or
STATUS
EXIT
6
the Audio Out jack on the device
to the Audio In (white) jack on
the FRONT of the television.
STATUS
EXIT
STATUS
EXIT
MENU Button
3
4
STATUS
EXIT
Audio cable
OUT
AUDIO
IN
ANTENNA
IN
OUT
VIDEO
IN
1
DOWN buttons to scroll
through the on-screen menu until
the word INSTALL is highlight-
ed.
1
MENU
Press to see the menu. Press
repeatedly to return to previous
menus or remove the menus.
3
4
ANTENNA
OUT
MENU
Remote Control
SLEEP
MUTE
OR
STATUS/EXIT Button
Press to see the current channel number.
Press to remove a menu.
SLEEP
MUTE
OR
8
Press CURSOR UP
or
3
5
For Stereo Devices: Connect
one end of the audio cables from
the Audio Out jacks on the
device to the Audio In (red and
white) jacks on the FRONT of
the television.
MENU
MENU
8
VCR, Camcorder,
DVD
Player, etc. with
Audio and
Point the remote control toward
the remote sensor on the front of
the TV when operating the TV.
SURF
3
5
SMART
DOWN
buttons to scroll
SURF
3
5
SMART
Install
Press the CURSOR RIGHT
button to display the
INSTALL menu features.
Instalar
Stereo models (red and
white AUDIO IN jacks)
PICTURE SOUND
Language
English
Cable
the Install features until the
word LANGUAGE is high-
lighted.
2
4
8
Idioma
2
4
PICTURE SOUND
Tuner Mode
Auto Program
Channel Edit
Arrow 2 3 5 Buttons
Sintonia
3
4
Auto Programa
Editar Canal
CC Button
Press to select or adjust items in
the menu.
SLEEP
SLEEP
MUTE
MUTE
Video Out jacks
Press to activate Closed Captioning.
Details are on panel 21.
8
Remote sensor on
remote control
Press CURSOR UP or
Press the CURSOR RIGHT
button repeatedly to
select ENGLISH or
8
Battery Installation
DOWN buttons to scroll
Stereo Devices:
Turn the TV and the accessory
5
6
MAGNAVOX
the Install features until the
words TUNER MODE is high-
lighted.
MUTE Button
MAGNAVOX
To load the supplied batteries into
the remote:
Remove the battery compart-
ment lid on the back of the
remote.
OR
device ON.
SURF
SURF
R
SMART
SMART
E
3
OW
6
P
SLEEP Button
3
Press to eliminate or restore the TV
sound. MUTE will appear on the TV
when the sound is muted.
+
ESPAÑOL (Spanish).
H
C
2
1
–
H
C
C
Press the CH+ or CH- but-
ton on the remote control to
5
Press to set the TV to turn itself off with-
in a certain time. Details are on panel 22.
9
0
4
+
L
O
V
8
Install
When finished, press the
STATUS /EXIT button to
remove the menu from the
TV’s screen.
C
7
–
L
O
V
Language
English
Auto
H
/C
A
Press the CURSOR RIGHT
button to select either
ANTENNA, CABLE, or
AUTO mode.
4
PICTURE SOUND
PICTURE SOUND
S
U
Tuner Mode
Auto Program
Channel Edit
T
A
U
T
EN
E
T
U
S
M
1
2
M
tune the TV to the front input
jacks. “AV” will appear on the TV
screen.
IT
X
E
5
6
P
T
E
E
R
A
L
S
M
S
D
UN
O
S
SmartSurf
F
R
U
S
E
UR
MENU
ICT
P
ó
V
O
L
U
M
E
+
CHANNEL
POWER
Place the batteries (two AA)
in the remote. Be sure the (+)
SMART SOUND Button
Press to choose a sound setting.
Details are on panel 24.
If your TV model has SmartSurf, press this
button to move through the channels you
have set. Details are on panel 25.
Battery Installation
Front Jack panel of TV
Press the PLAY
button on
When finished, press the
STATUS /EXIT button to
remove the on-screen menu
from the TV’s screen.
and (-) ends of the batteries line up
correctly (as marked inside the
remote).
the accessory device to view
playback, or to access the acces-
sory device (camera, gaming unit,
etc.).
5
3
1
SMART PICTURE Button
Press to choose a picture setting.
Details are on panel 23.
2
Reattach the battery lid.
Red and White
Audio cables
Yellow
Video
cable
3
HELPFUL HINT
The Language control only makes
the TV’s on-screen MENU items
appear in English or Spanish text.
OUT
OUT
ANTENNA
IN
Helpful Hints
The current channel number will
appear briefly when you first turn on
the TV or when you change channels.
VIDEO
R
AUDIO
L
ANTENNA
OUT
VCR,
MAGNAVOX
MAGNAVOX
NOTE:
3
5
Camcorder,
DVD
NOTE: For model 13MT1533
Audio sound is only available
via the headphone
IN
IN
For model 13MT1533
Audio sound is only
available via the
headphone
NOTE: For model 13MT1533
Audio sound is only available
via the headphone
Player, etc.
with
It does not change the other on-
screen text features such as Closed
Caption (CC) TV shows.
Audio and
Video Out jacks
Press STATUS/EXIT to see the cur-
rent channel number.
Continued on Next Panel
HOW TO AUTOMATICALLY PROGRAM TV
HOW TO USE THE SOUND CONTROLS (20MS233S ONLY)
HOW TO ADD OR DELETE CHANNELS
HOW TO USE THE FORMAT CONTROL (EXPAND 4:3)
UNDERSTANDING THE SMARTLOCK™ CONTROLS
9
10
11 HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
12
13
14
our TV can automatically set itself
hannel Edit makes it easy for you to ADD
o adjust your TV sound, select and use the
TSound Menu Controls listed below.
o adjust your TV picture controls, select a
Tchannel and use the Picture Menu Controls
listed below:
any times while watching movies from
Ma DVD player the image is shown in
“letter box” format. This is the format that is
shown in movie theaters. When shown on a
TV screen, the image will have areas of
black on top and bottom of the screen.
he SmartLock™ feature is an integrated cir- MOVIE RATINGS Continued
Cor DELETE channels from the list of chan-
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your
area when the CHANNEL (+) or (–)
buttons are pressed.
Tcuit that receives and processes data sent by
R: Restricted - This is programming is specifi-
Main
Picture
Main
Picture
nels stored in the TV’s memory.
Brightness
Color
Main
Picture
Brightness
Color
broadcasters, or other program providers, that
contain program content advisories. When pro-
grammed by the viewer, a TV with SmartLock™
can respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence, sexual
situations, etc.). This is a great feature to censor
the type of viewing children may watch.
cally designed for adults. Anyone under the
age of 17 should only view this programming
with an accompanying parent or adult guardian.
Sound
Features
Install
3
or
2
Sound
Features
Install
Brightness
Color
Treble Boost: Press the
buttons to turn the control On or
Off. When On, the control will
Sound
Treble Boost
Picture
Sharpness
Tint
Press the MENU button on the
Picture
Main
Picture
Picture
Sharpness
Tint
Sound
Features
Install
Main
Picture
Brightness: Press the CURSOR
Language
Picture
Sharpness
Tint
remote to show the on-screen menu.
SmartLock
Format
1
Main
Picture
On
50
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
Brightness
1
RIGHT 3or LEFT 2 buttons
Sound
Features
Install
More...
Language
1
More...
8
Press the CURSOR UP or
8
Bass Boost
Balance
AVL
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only.
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intensely
suggestive language.
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
Color
until the darkest parts of the picture
are as bright as you prefer.
enhance the high frequency sounds.
More...
DOWN buttons to scroll
Press the MENU button on the
remote to display the on-screen
Picture
Note: Make sure the antenna or
cable signal connection has been
completed before AUTO PROGRAM
is activated.
Press the MENU button
on the remote to show the
2through the on-screen menu until the
Bass Boost: Press the or
3
2
6
8
Sharpness
Tint
1
word INSTALL is highlighted.
Color: Press the CURSOR
RIGHT 3 or LEFT 2 buttons
to add or eliminate color.
buttons to turn the control On or
Off. When On, the control will
enhance the low frequency sounds.
1
4
2
5
8
0
3
POWER
CH
menu.
2
6
9
2
4
2
4
7
Sound
Press the CURSOR RIGHT 3
2
3
6
Press the CURSOR DOWN
Install
button to display the INSTALL menu
Color Temp.
1
4
2
5
8
0
3
6
POWER
CH
SmartLock™ offers various BLOCK-
ING controls from which to choose:
Features
POWER
1
4
2
5
8
0
3
Channel No.
Skipped
Language
CH
7
9
button until the word FEA-
3features.
SmartLock
Format
Tuner Mode
Auto Program
Channel Edit
2
A/CH
CC
VOL
VOL
4:3
Picture: Press the CURSOR
RIGHT 3or LEFT 2 buttons
until lightest parts of the picture
show good detail.
6
CH
TURES is highlighted.
Press the CURSOR RIGHT
Install
Balance: Press the or but-
3
2
Language
8
CH
7
9
1
2
2
4
1
Press the CURSOR UP or
STATUS
Access Code - An Access Code must be
set to prevent children from unblocking
questionable or censored programming set
by their parents.
CH
7
9
8
3
tons to adjust the level of sound com-
ing from the left and right speakers.
Tuner Mode
Auto Program
Channel Edit
on-screen menu.
DOWN buttons to scroll the
4Install features until the words
3
4
1
A/CH
CC
VOL
VOL
TV RATINGS
TV-Y -- Designed for a very young audience,
including children ages 2-6.
MENU
button to display the FEATURES
menu options (SmartLock or
Format).
Press the CURSOR DOWN
button until the word FORMAT
is highlighted.
A/CH
CC
VOL
VOL
3
6
5
8
Press the CURSOR UP
STATUS
EXIT
8
6
CHANNEL EDIT are highlighted.
STATUS
EXIT
SLEEP
MUTE
or DOWN
buttons to
1
AVL: (Auto Volume Leveler) Press
Brightness
65
50
50
50
Sharpness: Press the CURSOR
RIGHT 3or LEFT 2 buttons to
improve detail in the picture.
MENU
Treble Boost
On
OR
Press the CURSOR RIGHT 3
Channel Edit
Channel No.
Skipped
scroll through the on-screen
menu until the word
3
5
8
SURF
the
3
or
2
buttons to turn the
SMART
MENU
Channel Block - After an access code has
been programmed, you can block individual
channels including the A/V inputs.
TV-Y7 -- It may be appropriate for children
age 7 and above who have acquired the devel-
opment skills needed to distinguish between
make-believe and reality.
TV-G -- Suitable for most audiences, this type
of programming contains little or no violence,
no strong language, and little or no sexual dia-
logue or situations.
TV-PG -- This program contains material
that parents may find unsuitable for younger
children. Could contain Moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialogue (D).
12
button to display the CHANNEL
4
5
6
SLEEP
MUTE
PICTURE SOUND
control On or Off. When On, AVL
will level out the sound being heard
when sudden changes in volume
occur during commercial breaks or
channel changes.
5EDIT options.
or Off
On
SLEEP
MUTE
4
5
Features
SmartLock
Format
INSTALL is highlighted.
Color
SURF
3
5
SMART
Auto Program
Channel
Tint: Press the CURSOR RIGHT
3or LEFT 2 buttons to obtain
natural skin tones.
Expand 4:3
With the CHANNEL EDIT
Bass Boost
Balance
AVL
3
5
Press the CURSOR
SURF
SMART
2
4
PICTURE SOUND
12
13
Clear All - Allows you clear all channels
being blocked from your viewing set with
the Channel Block Control.
Press the CURSOR RIGHT
or CURSOR LEFT
3
options displayed, and CHANNEL
RIGHT
button to dis-
2
4
PICTURE SOUND
6NO. highlighted; you can use the cur-
2
buttons
3
4
or Off
R
Picture
MAGNAVOX
play the INSTALL menu
sor buttons to scroll through all avail-
able channels that you wish to add
(Skipped OFF), or delete (Skipped
ON) from the TV’s memory. You can
also use the NUMBERED buttons
to go directly to a specific num-
bered channel that you wish to
add or skip. Or, you can also use the
CH + or CH - to quickly scan the
to select one of the two options 4:3
or Expand 4:3.
L
Color Temp: Press the CURSOR
RIGHT 3or LEFT 2 buttons
to select NORMAL, COOL, or
WARM picture preferences. (NOR-
MAL will keep the whites, white;
COOL will make the whites, bluish;
and WARM will make the whites,
reddish.)
features.
Auto Program
Channel
Channel Edit
Channel No.
Skipped
Sound: Press the
3
or
2
buttons
Block All - Allows you to block ALL chan-
nels and A/V inputs at one time.
Sharpness
4:3 - Standard format for the TV.
Expand 4:3 - Enlarges the picture
to fill out the entire screen area,
eliminating the “letter box” effect.
8
Press CURSOR UP
or
On
Off
to select between Stereo or Mono
settings. Note: If Stereo is not pres-
ent on a selected show and the TV is
placed in the Stereo mode, the
sound coming from the TV will
remain in the Mono mode.
MAGNAVOX
8
5
DOWN
buttons to
On
Movie Ratings - Certain blocking options
exist which will block programming based on
ratings patterned by the Motion Pictures
Association of America.
MAGNAVOX
scroll the Install features until
the words AUTO PRO-
GRAM are highlighted.
Channel Edit
Channel No.
Skipped
Auto Program
Channel
Tint
0
or Off
14
When finished, press the STA-
TUS/EXIT button to remove the
menu from the TV’s screen.
Press the CURSOR
6
Sound
Mono
or Stereo
channels that have not been skipped.
8
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
Color Temp.
Normal
TV-14 -- This program contains some materi-
al that many parents would find unsuitable for
children under 14 years of age. This type of
programming contains one or more of the fol-
lowing: intense violence (V), intense sexual sit-
uations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
RIGHT
button to start
3
5
Contrast +: Press the CURSOR
RIGHT 3or LEFT 2 buttons to
toggle the control On or OFF. The
Contrast + control helps to “sharp-
en” the picture quality. The black
portions of the picture become rich-
er in darkness and the whites
Using the CURSOR DOWN
Note: The Expand 4:3 format can also
the Auto Program scanning
of channels. Auto
Warm
or
Cool
button, scroll the menu to highlight
7
be activated using the CURSOR UP 8
7the word SKIPPED.
8
or DOWN
buttons when the
MOVIE RATINGS
Programming will store all
available channels in the TV’s
memory then tune to the
lowest available channel
when done.
When finished, press the
STATUS/EXIT button to
remove the menu from the
TV’s screen.
Now use the CURSOR RIGHT 3
onscreen menu is not being displayed.
Pressing these buttons will toggle the
standard 4:3 format and the Expand 4:3
format.
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages.
HELPFUL HINT
button to toggle between ON or
8OFIfFO. N is selected the channel is
On
Off
Contrast +
4:3
Expand 4:3
When CABLE is selected, channels
1-125 are available.
HELPFUL HINT
skipped when scrolling channels
with the CH + or – buttons. If
OFF is selected the channel is not
skipped when scrolling channels
with the CH + or – buttons.
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the age
of 13.
become brighter.
TV-MA -- This program is specifically
designed to be viewed by adults and therefore
may be unsuitable for children under 17. This
type of programming contains one or more of
the following: graphic violence (V), explicit sex-
ual situations (S), or crude indecent language
(L).
An “X” appearing in front of any channel
will indicate that channel has skip on. When
the CH + or CH - buttons are used, those
channels will be skipped.
When ANTENNA is selected,
channels 2-69 are available.
When AUTO is selected, the TV
will automatically set itself to the
correct mode based on the type of
signal it detects when the AUTO
PROGRAM feature is activated.
6
In order to get to the external input chan-
nel AV, you must use the CURSOR Right 3
or CURSOR LEFT 2buttons.
When finished, press the STA-
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
TUS /EXIT button to remove the
9menu from the TV’s screen.
HOW TO BLOCK CHANNELS
fter your personal access code has been
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME
BLOCKING PROGRAMS BASED ON TV RATINGS
OTHER SMARTLOCK™ BLOCKING OPTIONS
ETTING UP A SMARTLOCK™ ACCESS CODE
15
16
17
18
19
20
he SmartLock™ feature can block pro-
Tgramming based on the Movie Industry rat-
ings.
he SmartLock™ feature can block pro-
ver the next few panels you’ll learn how
fter blocking specific channels there
Amay come a time when you want to
block or clear all the channels at the same
time.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
martLock™ offers the viewer other
Tgramming based on the TV Industry rat-
Oto block channels and get a better
understanding of the rating terms for certain
programming.
Main
Picture
Features
SmartLock
Format
Aset (see previous page), you are now
ready to select the channels or the A/V
Inputs you want to block out or censor.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
Sblocking features as well. With these
Blocking Options, the censoring can be
turned ON or OFF.
Once you’ve entered your access code and
the SmartLock™ features are displayed on
the screen:
SmartLock
Format
Timer
TV Rating
T V-Y
ings.
SmartLock
SmartLock
Block Channel
Setup Code
Clear All
SmartLock
Block Channel
Setup Code
Clear All
Sound
Features
Install
Start Time
Stop Time
Channel
Activate
Display
SmartLock
Setup Code
Clear All
Off
Once you’ve entered your access code and the
SmartLock™ features are displayed on the
screen:
Block Channel OffStop Time
G
Once you’ve entered your access code and the
SmartLock™ features are displayed on the
screen:
TV-Y7
TV-G
Setup Code
Clear All
Channel
Activate
Display
PG
PG-13
R
First, let’s start by learning how to set a per-
sonal access code:
Clear ?Stop Time
Channel
Block All
TV-PG
TV-14
TV-MA
Block All
Block All
Block All
Press the MENU button on the
Movie Rating
TV Rating
Activate
Press the CURSOR UP 5 or
Movie Rating
TV Rating
NC-17
X
5
Movie Rating
TV Rating
Movie Rating
TV Rating
Block Options
Press the CURSOR UP 5 or
remote to show the on-screen
Display
DOWN
buttons to highlight the
1
5
1
2
Features
SmartLock
Format
Features
SmartLock
Format
DOWN
buttons to highlight the
menu.
Press the CURSOR UP 5 or
words TV RATING.
1
2
Press the CURSOR UP 5or
Access Code
- - - -
Access Code
XXXX
5
5
words MOVIE RATING.
DOWN
buttons until the
Press the CURSOR UP 5or
Press the CURSOR UP
5
or
DOWN
buttons until the
1
2
Press the CURSOR RIGHT
3
5
1
2
5
words BLOCKING OPTIONS
DOWN
buttons until the word
DOWN
buttons to select
words BLOCK CHANNELS are
button to display the TV RATING
options (TV-Y, TV-Y7, TV-G, TV-
PG, TV-14, or TV-MA).
1
2
2
3
4
5
6
are highlighted.
FEATURES is highlighted.
Cleared
Clear All
Press the CURSOR RIGHT 3
button to display the MOVIE RAT-
ING options (G, PG, PG-13, R,
NC17, or X).
highlighted.
either CLEAR ALL or BLOCK ALL.
On
TV-Y
Press the CURSOR RIGHT 3
button to display the FEATURES
menu options.
Block Channel On
Movie Rating
Press the CURSOR RIGHT
button to display the Blocking
Options (BLOCKING, UNRAT-
ED, or NO RATING) menu.
3
Press the CURSOR UP 5 or
Press the CURSOR RIGHT 3
button to turn blocking ON or
OFF for that channel. When ON is
selected the channel will be
blocked.
If CLEAR ALL is selected,
G
Off
5
Block All, FV
TV-Y7
TV-G
DOWN buttons to highlight any
On
On
On
Features
SmartLock
Format
Features
SmartLock
Format
Blocking
SmartLock
Block Channel
Setup Code
Clear All
PG
PG-13
R
3
press the CURSOR RIGHT 3
button to clear all blocked chan-
nels. All channels will be viewable.
Access Code
XXXX
New Code
- - - -
Press the CURSOR UP
5
or
of the TV Rating options. When high-
lighted, all these options can be turned
ON (which will allow blocking) or OFF
(which will allow viewing).
5
Enter your
Access Code to
view a tuned
channel that is
blocked with
Block Channel.
DOWN buttons until the
Incorrect
Off
Press the CURSOR UP 5 or
5
Channel 12
Unrated
words SmartLock™ are highlighted.
DOWN
buttons to highlight any
BLOCKING: Might be called the “mas-
ter switch” for SmartLock™. When ON,
ALL blocking/censoring will take place.
When OFF, ALL blocking is disabled.
Blocked By SmartLock
Channel Blocking
Access Code
- - - -
NC-17
X
3
Block All, V, S, L, D
TV-PG
TV-14
of the Movie Rating options. When
highlighted, all these options can be
turned ON (which will allow blocking)
or OFF (which will allow viewing).
Block All
Off
Press the CURSOR RIGHT 3
button. The screen will read,
“ACCESS CODE - - - - .”
If BLOCK ALL is selected,
press the CURSOR RIGHT 3
button to turn the control ON or
OFF. When ON is selected, ALL
available channels will be blocked
from viewing.
Movie Rating
TV Rating
No Rating
NOTE: Some TV RATING options also
have sub-ratings. The ratings of TV-Y7, TV-
PG, TV-14, TV-MA can be customized to
block V (violence), FV (fantasy violence), S
(sexual situations), L (coarse language), or D
(suggestive dialogue).
Block All, V, S, L, D
Block All, V, S, L
Press the CH + or CH – button
to select other channels you wish
to block. Repeat step 2 to block
the new channel.
3
4
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX”
appears on the Access Code screen
as you press the numbered buttons.
Features
SmartLock
Format
SmartLock
Block Channel
Setup Code
Clear All
UNRATED: ALL unrated programs
based on the Movie Ratings or Parental
(TV) Guidelines can be blocked if this fea-
ture is set to ON and the BLOCKING
feature is set to OFF.
Confirm Code
XXXX
TV-MA
OffStop Time
Channel
Activate
POWER
1
2
5
8
0
3
6
G
On
Use the CURSOR RIGHT 3 but-
ton on the remote to turn the rating
option ON or OFF.
Block All
Block All
On
Movie Rating
TV Rating
Display
CH
CH
4
1
4
POWER
1
4
2
5
8
0
3
6
1
4
2
5
8
0
3
6
1
“INCORRECT CODE” will
appear on the screen, and you will
need to enter 0, 7, 1, 1 again.
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
Press the CURSOR RIGHT
3
7
9
POWER
1
4
2
5
8
0
3
CH
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
button on the remote to turn the TV-
POWER
1
4
2
5
8
0
3
6
3
4
CH
CH
NO RATING: ALL programming with
NO content advisory data can be
blocked if set to ON and the BLOCK-
ING feature is set to OFF.
6
A/CH
CC
VO
CH
Y or TV-G rating ON or OFF. Or,
press the CURSOR RIGHT
9
When a rating level is chosen to be
blocked, any higher level rating will also be
blocked from viewing. (i.e.: If “R” is select-
ed to be blocked, NC-17 and X will auto-
matically be blocked.)
3
7
9
3
1
CH
1
4
2
5
8
0
3
6
POWER
7
9
3
The screen will ask you to enter a
“New Code.” Enter a “new” 4
digit code using the NUM-
BERED buttons. The screen will
then ask you to CONFIRM the code
you just entered. Enter your new
code again. “XXXX” will appear
when you enter your new code and
then display the SmartLock™ menu
options.
STATUS
EXIT
OL
H
CC
VOL
VOL
1
1
3
5
A/CH
CC
5
7
9
CH
button to enter the sub-menus for the
TV-Y7, TV-PG, TV-14 or TV-MA rat-
ings.
A/CH
CC
VO
2
6
7
NOTE: If you ever forget your code,
the 0, 7, 1, 1 code is the factory default
and can be used to enter and create a
new access code.
3
STATUS
CH
A/CH
CC
1
STATUS
EXIT
VOL
4
7
9
3
2
MENU
STATUS
EXIT
OL
4
EXIT
NOTE: If you ever forget your code,
the 0, 7, 1, 1 code is the factory default
and can be used to enter and create a
new access code.
A/CH
CC
VO
4
VOL
7
STATUS
EXIT
3
MENU
MENU
Press the CURSOR UP 5 or
MENU
SLEEP
MUTE
STATUS
EXIT
VOL
2
4
6
If the TV-Y7, TV-PG, TV-14 or TV-MA
sub-menu is accessed, press the
CURSOR UP 5 or DOWN
buttons to select one of the options
(Block All, V, S, L, D, or FV).
5
MENU
DOWN
buttons to highlight
SLEEP
MUTE
3
4
P
MUTE
1
MENU
SLEEP
MUTE
5
6
NOTE: If you ever forget your code, the
0, 7, 1, 1 code is the factory default and
can be used to enter and create a new
access code.
2
4
the desired feature.
SURF
SMART
SLEEP
MUTE
SLEEP
MUTE
SURF
1
3
SMART
2
4
SURF
SURF
SMART
SMART
PICTURE SOUND
2
3
5
SURF
1
SMART
1
3
When highlighted, each feature can
be turned ON or OFF using the
CURSOR RIGHT 3 or LEFT
PICTURE SOUND
SURF
SMART
PICTURE SOUND
PICTURE SOUND
1
PICTURE SOUND
PICTURE SOUND
Press the CURSOR RIGHT
3
Proceed to the next panel to learn more...
2
4
button on the remote to turn the
2
buttons on the remote.
option ON or OFF.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
Some models refer to SmartLock as
AutoLock in the on-screen menu.
These features are the same.
MAGNAVOX
MAGNAVOX
MAGNAVOX
MAGNAVOX
MAGNAVOX
MAGNAVOX
SETTING THE SLEEPTIMER CONTROL
our TV can be set to automatically turn
USING THE SMARTPICTURE™ CONTROL
USING THE SMARTSURF™ CONTROL
ALTERNATE CHANNEL
our remote control has an Alternate
YChannel button that allows you to toggle
between the current and previous channel.
For instance, if you are watching two games
on TV, you can enter the channel numbers
once and flip between the two channels
with the touch of only one button.
HOW TO USE THE CLOSED CAPTION CONTROLS
23
21
22
24USING THE SMARTSOUND™ CONTROL(20MS233S ONLY) 25
martSurf lets you set up to eight chan-
26
hether you’re watching a movie or a
he Smart Sound feature allows the lis-
Ttener to select between four different
losed Captioning (CC) allows you to
Cread the voice content of television pro-
grams on the TV screen. Designed to help
the hearing impaired, this feature uses on-
screen “text boxes” to show dialogue and
conversations while the TV program is in
progress.
Yitself off at a given amount of time.
Wsporting event, your TV has automat-
Snels in a quick viewing list. Then, you
can use the SURF button on the remote
control to switch between different TV pro-
grams that currently interest you.
ic video control settings matched for your
factory set sound options.
Press the SLEEP button on the
current program source or content.
10
Surf
10
remote control and the SLEEP
timer display will appear on the
screen.
1
Press the SMART SOUND but-
Add
Press the SMART PICTURE
button on the remote control. The
ton on the remote control. The cur-
rent Smart Sound setting will appear
in the middle of the screen.
1
After entering the two channels numbers,
so that one is the last viewed channel and
the other is the current channel, follow the
step below.
1
Press CH +/– or the Number
Sleep 15
current Smart Picture setting will be
displayed on the screen.
Press the CC button on the
remote to display the current Closed
Press the SLEEP button repeat-
Personal
Personal
buttons to select a channel to add
CC Off
1
Surf List Empty
1
4
2
5
8
0
3
6
POWER
CH
edly to pick the amount of time
to the SURF list.
1
2
2
Press the SMART SOUND but-
10
Surf
10
Caption setting.
(15, 30, 45, 60, 90, 120, 180, or 240
minutes) before the TV will turn
itself off.
Press the SMART PICTURE
button repeatedly to select either
ton repeatedly to toggle between
the four settings. (PERSONAL,
VOICE, MUSIC, or THEATRE)
Delete
2
CH
7
9
Press SURF while the channel
Press the CC button repeatedly
to choose from the four Closed
2
A/CH
CC
VOL
VOL
number appears.
1
4
2
5
8
0
3
6
POWER
CH
2
3
Press the A/CH button on the
Sleep 15
Sleep 30
Sleep 45
Sleep 60
Sleep 90
Sleep 120
Sleep 180
Sleep 240
Sleep off
PERSONAL, MOVIES, SPORTS,
WEAK SIGNAL, or MULTIMEDIA
picture settings.
STATUS
EXIT
Caption options (CC Off, CC1,
CC2, or CC Mute). CC Mute will
activate Closed Captioning when the
MUTE button is pressed.
remote control. The channels will
toggle between the current channel
and the last viewed channel.
1
POWER
CH
7
9
CH
1
4
2
5
8
0
3
6
Press 3 or 2 to add the chan-
nel to the SURF list or delete
MENU
NOTE: An on-screen count down will
appear during the last minute before the
TV shuts itself off. If any button is
pressed during the last minute of the
countdown, the Sleeptimer setting will
be cancelled.
POWER
1
4
2
5
8
0
3
POWER
1
4
2
5
8
0
3
6
Theatre
Music
Voice
NOTE: The way you choose to set the
Sound Menu Controls will become your
PERSONAL setting.
A/CH
CC
VOL
VOL
CC Off
CC1
Movies
Sports
POWER
CH
1
4
2
5
8
0
3
6
SLEEP
MUTE
STATUS
EXIT
6
CH
CH
it from the list. An on-screen
message will indicate whether you
are adding or deleting the channel.
Repeat steps 1 through 3 to add
additional channels (up to eight) to
the SURF list.
MENU
CH
7
9
12
SURF
SMART
NOTE: The way you choose to set the
Picture Menu Controls will become your
PERSONAL setting.
CH
7
9
CH
7
9
SLEEP
MUTE
PICTURE SOUND
A/CH
CC
VOL
VOL
When finished, press the STA-
CH
7
9
A/CH
CC
VOL
VOL
A/CH
CC
VOL
VOL
SURF
SMART
12
TUS /EXIT button to remove the
Weak Signal
Multimedia
STATUS
EXIT
3
A/CH
CC
VOL
VOL
P
I
C
T
U
R
E
S
O
U
N
D
Surf
CC2
STATUS
EXIT
STATUS
EXIT
menu from the TV’s screen.
10
12
4
3
1
2
STATUS
EXIT
MENU
Add
MENU
1
2
MENU
MAGNAVOX
CC Mute
MENU
SLEEP
MUTE
1
2
MAGNAVOX
SLEEP
MUTE
1
2
SLEEP
MUTE
SLEEP
MUTE
SURF
SMART
12
Surf
10
SURF
SMART
SURF
SMART
PICTURE SOUND
PICTURE SOUND
SURF
SMART
12
PICTURE SOUND
4
Delete
PICTURE SOUND
During the last 10
seconds of a
Sleeptimer setting,
an on-screen dis-
play will read
During the last minute
of a Sleeptimer setting,
an on-screen count
down will be displayed.
Pressing any button dur-
ing the last minute will
cancel the Sleeptimer.
MAGNAVOX
MAGNAVOX
MAGNAVOX
Press SURF repeatedly
HELPFUL HINT
GOOD BYE.
MAGNAVOX
during TV viewing to scan
through the channels in
the SURF list.
Not all TV programs and prod-
uct commercials are made with
Closed Caption (CC) information
included. Neither are all Closed
Caption modes (CC1, or CC2) nec-
essarily being used during the trans-
mission of a closed caption program.
Refer to your area's TV program list-
ings for the stations and times of
Closed Caption shows.
Good Bye
9 Sec
45 Sec
TROUBLESHOOTING
Remote Does Not Work
CARE AND CLEANING
GLOSSARY
MAGNA X L
WARRANTY
28
29
27
Days
ay
No Power
WARNING Concerning Stationary
Images on the TV Screen:
PLACEMENT OF THE TV
Auto Programming • The procedure of
adding or deleting channel numbers into
the Television’s memory circuits. In this
format the Television “remembers’’ only
the locally available or desired channel
numbers and skips over any unwanted
channel numbers.
Remote Sensor Window •
the
•Check the TV power cord. Unplug the TV,
wait 10 seconds, then reinsert the plug into
the outlet and push the POWER button
again.
•Check that the outlet is not on a wall
switch.
•Check the batteries. If necessary, replace
them with 2 AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
•Clean the remote control and the remote
control sensor window on the TV.
•Check the TV power cord. Unplug the
TV, wait 10 seconds, then reinsert the
plug into the outlet and push the POWER
button again.
or opening found on the Television con-
trol panel through which infrared remote
control command signals are received.
•
To avoid cabinet warping, cabinet color
changes, and increased chance of set
failure, do not place the TV where tem-
peratures can become excessively hot;
for example, in direct sunlight or near a
heating appliance.
Do not leave stationary or letterbox
images on screen for extended peri-
ods of time. This can cause uneven
picture-tube aging.
against
p,
y
Status/Exit • Allows the user to quickly
confirm what channel number is currently
being viewed. Status can also be used to
clear the Television of on screen displays
or information (rather than waiting for the
displays to “time out” or automatically dis-
appear from the screen).
or
by these
Normal use of the TV should involve the
showing of pictures that contain constantly
moving and changing images that fill the
screen. Be careful not to leave nonmoving
images on screen for extended periods of
time, or to display the same images on
screen too frequently, because subtle
ghost images can be left on the picture
tubes. Sources of stationary images may
be DVD disks, laser disks, video games,
CD-i disks, videotapes, digital television
boxes, broadcast channels, cable channels,
satellite channels, and others. Here are
some examples of stationary images
(this is not an all-inclusive list; you
may encounter others in your view-
ing):
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
•
Be sure to allow a free flow of air to
and from the perforated back cover of
the set.
Coaxial Cable • A single solid antenna
wire normally matched with a metal plug
(F-type) end connector that screws (or
pushes) directly onto a 75 Ohm input
found on the Television or VCR.
No Picture
or
o-
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
•Check to be sure the TV outlet is not on
a wall switch.
TV Displays Wrong Channel or No
Channels Above 13
•Repeat channel selection.
•Check antenna connections. Are they
properly secured to the TV's ANT 75Ω
plug?
•Check the TUNER MODE control for the
correct tuner setting.
•Try running the Auto Program feature to
find all available channels.
CLEANING
•
eceipt
To avoid possible shock hazard, be sure
the TV is unplugged from the electrical
outlet before cleaning.
Regularly dust the TV with a dry, non-
scratching duster to keep the TV clean.
When cleaning the TV, take care not to
scratch or damage the screen surface.
Avoid wearing jewelry or using anything
abrasive. Do not use household clean-
ers. Wipe the front screen with a clean
cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
Surf • The action of scanning specific
channel in a limited channel list.
is determined to be defec
for
Closed Caption • Broadcast standard
which allows you to read the voice con-
tent of television programs on the TV
screen. Designed to help the hearing
impaired this feature uses on-screen "text
boxes" to show dialogue and conversa-
tions while the TV program is in progress.
ys
•
•
will
Twin Lead Wire • The more commonly
used name for the two strand 300 Ohm
antenna wire used with many indoor and
outdoor antenna systems. In many cases
this type of antenna wire requires an addi-
tional adapter (or balun) in order to con-
nect to the 75 Ohm Input terminals
designed into the more recent Televisions
and VCRs.
•Press the CH+ or CH- buttons on the
remote to make sure the correct signal
source is selected (FRONT or Current
Channel).
•Add the desired channel numbers (using
the CHANNEL EDIT control) into the
TV’s memory.
•Check to be sure the TUNER MODES are
set to the CABLE option and run the Auto
Program feature to find all available chan-
nels.
S.
No Sound
Side Audio/Video Inputs • Located on
the side of the TV these connectors
(phono type plug) are used for the input
of audio and video signals. Designed for
easy use with VCRs or cameras.
(For model 13MT1533, connect up the
SER
(French Speaking)
IN
headphone before checking)
•
DVD menus—listings of DVD disk
•Check the VOLUME buttons.
•Check the MUTE button on the remote
control.
•If you’re attempting to hook up auxiliary
equipment, check the audio jack connec-
tions located on the front of the TV.
content
•
Gently wipe the cabinet surfaces with a
clean cloth or sponge dampened in a
solution of cool, clear water and a mild
soap or detergent. Use a clean, dry
cloth to dry the wiped surfaces.
Occasionally vacuum the ventilation
holes or slots in the back cover of the
set.
Never use thinners, insecticide sprays,
or other chemicals on or near the cabi-
net, as they might cause permanent
marring of the cabinet finish.
Speaking)
•
Letterbox black bars—shown at the
top and bottom of the TV screen when
a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect
ratio.
Video-game images and score-
boards
Television station logos—present a
problem if they are bright and station-
ary; moving or low-contrast graphics
are less likely to cause uneven aging of
the picture tube
Tuner Mode • Feature control settings
made by the TV. Designed for first time
set up and use. Settings for signal connec-
the
On Screen Displays (OSD) • Refers to
the wording or messages generated by the tions (antenna or cable TV), plus channel
television (or VCR) to help the user with
program memory are held in the TV's
•
•
•
•
specific feature controls (color adjustment, memory (even if the set is unplugged and
programming, etc.).
moved to a new location.)
Menu • An on-screen listing of feature
controls shown on the Television screen
that are made available for user adjust-
ments.
or
•
•
Stock-market tickers—presented at
the bottom of the TV screen
Shopping channel logos and pric-
ing displays—bright and shown con-
stantly or repeatedly in the same loca-
tion on the TV screen.
y,
an
not
warranty
you
to
33152 (402) 536-4171
P.O.
|