Samsung Tint™
( S C H - R 4 2 0
S e r i e s )
T R I - B A N D
P H O N E
P O R T A B L E
M O B I L E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Printed in Korea.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
Nuance , VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
®
Openwave is a registered Trademark of Openwave, Inc.
®
RSA is a registered Trademark RSA Security, Inc.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
®
1
2
FCC Hearing-Aid Compatibility (HAC) Regulations for
3
Section 1: Getting Started
This section explains how to start using your Samsung
Tint™ phone by activating your service, setting up your
Voicemail, or getting an understanding of how this manual is put
together.
•
Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 146.
highlight Use the Navigation key (
) to move a
highlighting effect onto a menu item or screen
item of interest.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 118.
select
After “highlighting” a menu item or screen item,
press the OK key ( ) to launch, access, or save
a highlighted menu item or screen field of
interest.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
➔
Used in place of “select” in long “drill down”
procedure steps.
•
Notes — Explain alternative options within the current feature, menu,
or sub-menu.
Example: Select Settings
➔
Call Settings
➔
Call Answer.
•
Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
Getting Started
4
3. Place the battery over the battery (1) and press upward (2)
Installing the Battery
until it clicks into place.
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
Removing the Battery
1. Press and hold
to turn off the phone (if on).
2. Press down on the battery cover (1) and slide the cover
toward the bottom end of the phone. Lift the cover (2) up
and away from the phone, bottom end first.
1. Insert the top end of the battery first, matching the gold
contacts on the inside of the battery to those on the phone.
2. Press lightly on the bottom end of the battery down into the
phone until it slips into place.
5
3. Lift the bottom of the battery up (1) and away (2) from the
1. Plug the large end of the Travel Adapter into a standard
phone.
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the right side of your
phone.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
Use the Travel Adapter
Incorrect
The travel adapter included
with your phone is a
Correct
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Getting Started
6
Low Battery Indicator
Turning Your Phone On
ᮣ
Press
. The display and
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
keypad light.
Note: As with any other radio-transmitting
device, do not touch the antenna while
using your phone as this can affect call
quality and cn cause the phone to
operate at a higher power level than is
necessary.
Five bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
) and a tone sounding
A blinking empty battery icon (
indicate you have two to three minutes before the battery is too
low to operate the phone.
•
The phone begins searching for a
network signal.
If you continue to use your phone without charging its battery, the
phone will shut down.
•
Once the phone finds a signal, the
day, date, and time appear in
the second line of the display.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
•
You’re now ready to place and
receive calls.
Press
Note: If you are outside of your carrier’s
coverage or roaming area, the No
Antenna
Service icon (
) appears at the top
of the phone’s display. If you cannot
place or receive calls, try later when service is available, or at another
location.
7
Turning Your Phone Off
Listen to Voicemail
ᮣ
Press and hold
powers off.
for two or more seconds. Your phone
ᮣ
In standby mode, press and hold
or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting. You are prompted to enter your
password.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1. In standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
4
5
•
•
•
•
•
•
•
•
•
•
•
High speed data (CDMA 2000 1x Technology)
®
Bluetooth Wireless Technology (see Note)
Global Positioning System (GPS) Technology
Digital Assistant Functions and Wireless Carrier-provided applications
Picture (MMS) Messaging
Text (SMS) Messaging
E-mail and Instant Messaging (IM)
Built-in 1.3 Megapixel Digital Camera
Voice Dial
ChatLINK PTT (Push-To-Talk) compatible
Changeable Faceplates
Features
1. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
Note: The Tint™ phone supports the wireless handsfree profile and the
serial port profile for Bluetooth® wireless technology. The Tint™ also
supports Bluetooth OBEX profiles.
2. Camera Lens — The lens of your built-in camera.
9
3. Front Display — Indicates the status of your phone,
including status icons, message indicators, signal
strength, and so on.
Open View (Front) of Your Phone
4. Headset Connector — Used to connect an optional headset
(for hands free operation) or an optional TTY device.
5. Camera-Speakerphone-PTT Key — Launches the Camera
feature of your phone, places your phone in Speakerphone
mode, or launches the ChatLINK PTT( Push-To-Talk)
feature.
6. Power / Accessory Connector — Used to connect charging
accessories or optional accessory cables to your phone.
Features
1. Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
Understanding Your Phone
10
2. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
10. CLR Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
3. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
11. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
4. SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent calls log.
12. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
5. Voicemail Key — Lets you speed dial your Voicemail
account to review your voice messages.
13. OK Key — Pressing when navigating through a menu
6. Special Function Keys — Enter special characters. Perform
accepts the highlighted choice in a menu.
various functions.
14. Earpiece / Speaker — Lets you hear ringing and alert
7. Voice Recognition Key — Used to launch VoiceSignal voice
tones, alarm tones, and the other parties to calls.
recognition system.
Command Keys
8. Microphone — Lets the other caller hear you clearly when
Functions for the soft keys are defined by what appears above
you are speaking to them.
each in the display. There are two soft keys, Left (
).
) and Right
9. Alpha-numeric Keys — Use these keys to enter numbers,
(
letters, and characters.
11
Left Soft Key
•
In standby mode and with the Shortcut Icon Display setting Off, press
the MENU key (
) to open the Main Menu.
Some functions of the Left soft key (
) are as follows:
•
•
In a menu, press
to accept the highlighted selection.
•
In standby mode and with the Shortcut Icon Display setting On, press
In camera mode, press
message.
to take a photo or to create a Picture
•
When the OK key function is Edit, press the Edit key (
) to edit a
•
•
In standby mode and with the Shortcut Icon Display setting Off, press
the Contacts soft key (
When the Left soft key function is Edit, press the Edit soft key (
Draft message.
) to open the Find screen.
Send Key
)
to edit a Contacts entry.
The Send key (
) is used to answer calls, dial calls, and to
Right Soft Key
recall the last number(s) dialed, received, or missed.
•
•
•
Press
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls to
and from your phone.
once to answer calls.
Some functions of the Right soft key (
) are as follows:
) to launch the
to make a call.
•
•
•
In standby mode, press the @metro soft key (
@metro screen.
When the Right soft key function is Options, press the Options soft key
) and a pop-up menu appears.
When the Right soft key function is Back, press the Back soft key
) to back up one menu level.
OK Key
In standby mode and with the Shortcut Icon Display setting On, press
the OK key ( ) to launch the application highlighted in the
•
•
Press
Press
twice in standby mode to call the most recent number.
(
to pick up a waiting call. Press
again to switch back to
the other call.
(
Clear Key
•
The CLR key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
page 104.)
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
Understanding Your Phone
12
•
•
To erase the entire sentence, press and hold
To back up one menu level, briefly press
.
1. The top line of your
phone’s display
contains icons that
indicate network
status, battery
power, signal
.
End Key
•
•
•
Press and hold the End key
Briefly press once to disconnect a call.
to return to standby mode from any menu, or to cancel the
to turn your phone on or off.
Press
last input.
strength,
Navigation Key
connection type,
and more.
Use the directional keys on the Navigation key (
browse menus, sub-menus, and lists. Each directional key also
acts as a shortcut to launch applications.
) to
2. The Auto Answer icon appears beneath the current date to
indicate that the Auto Answer function is active.
Camera Key
3. The center portion of the display shows information such
Use the Camera key (
) on the right side of the phone to
as call progress information, messages, and photos.
activate the camera built into your phone and to take pictures.
Understanding the Display Screen
Main Display — Shortcut Icon On
4. The second line from the bottom of the display shows a
browsable line of shortcut icons, each of which can launch
an application program on your phone.
13
5. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key will display the Main Menu screen, pressing OK
4. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key will display the Contacts Find screen, pressing OK
(
) will launch the highlighted application, and pressing
(
) will display the Main Menu screen, and pressing the
the Right soft key will show the @metro screen.
Right soft key will show the @metro screen.
Main Display — Shortcut Icon Off
Front Display
1. The top line of the front display
contains icons that indicate network
status, battery power, signal
1. The top line of your
phone’s display
contains icons that
indicate network
status, battery
power, signal
2. The remainder of the display shows the clock and calendar
and shows information about such occurrences as
incoming calls, new messages, and charging status.
strength,
connection type,
and more.
Display Screen Icons
2. The Auto Answer icon appears beneath the current date to
Your Tint™ phone can show you definitions of the icons that
appear on the top line of the display.
indicate that the Auto Answer function is active.
3. The center portion of the display shows information such
as call progress information, messages, and photos.
Understanding Your Phone
14
To access the Icon Glossary:
In standby mode, press MENU
Phone Info Icon Glossary. A list appears showing the
icons that can appear on the top line of the displays.
Mobile IM
ᮣ
(
), then select Settings
➔
➔
mail@metro
Dialogue Boxes
Shortcut Icons
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
The following icons appear in the second line from the bottom of
the display (provided the display setting Shortcut Icon is set to On
and let you launch the associated applications.
)
•
•
•
•
•
•
•
Choice
–
Example: “Save Message?”
Reconfirm
–
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
My Metro
MetroWEB
Pocket Express
Metro 411
Loopt
–
–
–
–
Example: “System Error!”
Warning
–
Example: “Low Battery,” “Memory Full!”
ChatLINK
15
Receive Messages in Standby Mode
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
•
•
View Now — This selection allows you to view the messages now.
View Later — This selection allows you to view the messages at a
later date.
Note: During a phone call, the display backlight dims after 10 seconds and
turns off after another 30 seconds to conserve battery power,
regardless of the Backlight setting.
Highlight the desired viewing option and then press
.
Adjust the Ringer
Your Phone’s Modes
Standby Mode
In standby mode, press the Volume key (on the left side of the
phone) up or down.
1. In standby mode, press the Volume key up or down to set
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
the call ringer volume as desired.
•
•
After you power the phone on.
When you press after a call or from within a menu.
Options are:
• Ringer Off
• Vibrate
• Low
• Medium
• Medium/High
• High
In standby mode, you will see the time, day, and date as well as
all phone status icons.
• Low/Medium
• Vibrate/High
Place Calls in Standby Mode
1. While in standby mode, enter a phone number, and press
to place a call.
When you are satisfied with the setting, press SET. Your phone
returns to standby mode.
2. Press
to return to standby mode.
Understanding Your Phone
16
To exit Silent Mode:
Tip: You can also enter the Volume
>
Voice Calls sub-menu by pressing MENU
➔
Settings
➔
Sound Settings
➔
Volume
➔
Voice Calls. Use the Volume
ᮣ
While in Silent mode and standby mode, press and hold
key on the left side of your phone to adjust the ringer volume setting.
. “Exit Silent Mode” briefly appears in the display and
your phone returns to standby mode.
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon ( ) appears in the display when
the phone is in Vibrate/High mode.
Vibrate Mode
In standby mode, repeatedly press the Volume key (
)
Call Answer Mode
Down until “Vibrate” appears in the display.
The Volume key is on the left side of phone.
You can choose to answer a call by pressing any key except
or
, by pressing only
, or by opening the phone’s
Speakerphone Mode
Speakerphone mode lets you use your phone handsfree and/or
share calls with others.
Talk Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
•
Entering Speakerphone Mode — In standby mode, press and hold
the Speakerphone key ( ) — on the right side of the phone.
Exiting Speakerphone Mode — In Speakerphone mode, press and
hold the Speakerphone key ( ).
•
Enter – Exit Silent Mode
Note: You can also enter Speakerphone mode during a call by pressing the
Silences all tones your phone makes when you press a key.
Options soft key and selecting the Speaker On option.
To enter Silent Mode:
Handsfree Mode
ᮣ
In standby mode, press and hold
. “Entering Silent
Handsfree mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
Mode” and the Silent Mode icon (
) appear in the
display and your phone returns to standby mode.
17
To place your phone in Handsfree mode, do one of the following:
•
Connect an optional wired headset.
– Or –
Tip: You can cycle between T9 Word
,
Abc, and 123 by repeatedly pressing
•
Pair and connect an optional Bluetooth technology headset or
and holding the key until the phone beeps.
Lock Mode
Camera Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key. Unlock your phone by entering the lock code when
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
•
Entering Camera Mode — In standby mode, press and hold the
Camera key ( ) — on the right side of the phone.
Exiting Camera Mode — Press
•
.
Note: You can also enter Camera mode by pressing MENU
(
) and selecting
Multimedia
➔
Camera.
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Navigation key. Optional input modes are T9 Word Abc, ABC, 123,
,
Understanding Your Phone
18
Section 3: Call Functions
This section provides procedures for making and answering
calls. This section also describes features, such as call logs and
call timers, that help you make calls and manage your call time.
2. Press
to place the call.
Tip: If you need to make an emergency (911) call with Airplane mode
enabled, just dial the emergency number and press
Making a Call
1. With the phone on, enter the number you wish to call using
Three-way Calling
the keypad.
Call two other numbers and connect them to your call using
three-way calling.
Tip: You can also make calls to your Contacts and to recent callers listed in
the Calls logs.
1. In standby mode, enter the number for the first party in
your call, then press
2. When connected, ask the other party to remain on the line.
Press to place them on hold.
3. Enter the second party’s phone number and press
.
2. Press
to place the call.
Emergency Calls
When you call an Emergency Number, such as 911, your My Shot
phone locks itself in emergency mode, only allowing you to make
calls to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
.
4. When the second party answers, press
to connect all
three parties.
Manual Pause Calling
1. With the phone on, enter the Emergency Number you wish
to call using the keypad.
To manually call a number with pause(s) without storing it in your
Contacts list:
1. In standby mode, enter the number you wish to call.
19
2. Press the Options soft key.
ᮣ
In standby mode, press and hold the number key
corresponding to the desired Contact’s speed dial number.
The following pause options appear in the display:
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
3. Use the Up/Down navigation or arrow keys to highlight the
desired pause.
Example: To speed dial the Contact assigned speed dial 5, press and hold
.
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
4. Press
sequence.
5. Press
to enter the highlighted pause into the number
to call the number.
If you include a Wait with the number and after you make
the required entry, press to send your input.
2. Press and hold the number key representing the second
digit of the desired Contact’s speed dial number.
Tip: Press the Save soft key to store pauses along with the number if you
Example: To speed dial the Contact assigned speed dial 35, press
press and hold
then
plan to call the number frequently.
.
Speed Dialing
3-Touch Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
Call Functions
20
2. Press the number key representing the second digit of the
•
•
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
desired Contact’s speed dial number.
When saying a name, say the first name then the last name.
3. Press and hold the number key representing the third digit
Dialing a Name
of the desired Contact’s speed dial number.
To dial a name, do the following:
Example: To speed dial the Contacts entry assigned to speed dial 325, press
1. In standby mode, press and hold
.
, press
, then press and hold
.
“
Say a Command” appears in the display and is
pronounced through the earpiece.
2. Say, “Call”.
Voice Dialing
The voice recognition capabilities of your My Shot are exceptional
due to advanced, speaker-independent technology. This means
you do not need to “train” your phone to understand your voice.
You can use your voice in a natural manner to dial numbers.
You are prompted to “Say the name or number”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. (For more
If the name is recognized, Voice Dial repeats the name and
dials the number.
Use the Call command to dial any number stored in your Contacts
list by saying the name of the contact (Name Dialing). You can
also use Call to dial any telephone number, even numbers not
stored in your contact list, by speaking the individual digits in the
number (Digit Dialing).
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
Voice Dialing Tips:
•
Wait for the beep before speaking.
21
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or number.”
•
•
Press the Repeat soft key to say the name again.
3. Speak clearly and say the telephone number of the person
Press the Settings soft key, then press the Exit soft key to exit
VoiceSignal without dialing.
you want to call.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with “Which
Example: Say “7 8 1 9 7 0 5 2 0 0".
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
number?
”
5. Say one of the following number types:
•
•
•
•
“
Home
Work
Mobile
Pager
”
“
”
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
“
”
“
”
Voice Dial dials the specified number.
Dialing a Number
•
•
Press the Repeat soft key to say the name again.
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold
Press the Settings soft key, then press the Exit soft key to exit
VoiceSignal without dialing.
.
Call Functions
22
Pause Dialing From a Contacts Entry
Call Notification Features
If you voice dial a contact that contains 2-Sec Pause(s) simply
wait for the pauses to pass and the dialing to complete.
Your phone notifies you of a call in a variety of ways.
•
Eight ring volume settings: Ringer Off
Medium Medium/High High, or Vibrate/High
Different ring types or melodies to distinguish callers.
,
Vibrate, Low, Low/Medium,
,
,
.
If you voice dial a contact that contains Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).
•
•
Name display with caller ID. (If the caller’s name is programmed into
your Contacts).
•
Information about the last 90 each of incoming, missed, and outgoing
calls are automatically stored in a Calls log.
Answering a Call
Incoming
Set Call Ringer Volume
When you receive a call, the phone displays one of the following:
1. In standby mode, press the Volume key (
) on the
•
If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) appears in the display.
left side of the phone up or down to set the call ringer
volume as desired. Options are:
•
If the caller cannot be identified, “Call from unavailable #”, “Call
from restricted #”, or no number appears in the display.
• Ringer Off
• Vibrate
• Low
• Medium
• Medium/High
• High
Tip: Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. (For more
• Low/Medium
• Vibrate/High
2. Press SET once you’re satisfied with the setting. The phone
The phone continues to notify you of the call until one of the
following events occurs:
returns to standby mode.
•
•
•
You answer the call.
The calling party ends the call.
The call is sent to voicemail.
23
Call Waiting
Tip: You can also enter the Volume
>
Voice Calls sub-menu by selecting
Volume Voice Calls. Use the
MENU Settings Sound Settings
➔
➔
➔
➔
If you’re on a call, your phone beeps when another call is
incoming. Contact your Wireless Carrier for availability.
Volume key on the left side of your phone to adjust the ringer volume
setting.
1. Press
on the line.
to connect and ask the calling party to remain
Note: The Vibrate icon (
) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon (
) appears in the display when
2. Press
and the second caller is placed on hold and
the phone is in Vibrate/High mode.
you’re returned to the original caller.
Call Answer
3. Press
to alternate between calls.
Select from three methods for answering calls. This option can
be changed in the Settings menu.
Caller ID
Caller ID lets you identify who is calling you by displaying a
caller’s number. If the caller’s name and number are stored in
Contacts, the caller’s name also appears. If you’ve assigned a
picture to the entry, it appears in the display as well.
1. In standby mode, select MENU
Call Settings Call Answer
➔
Settings
➔
➔
.
2. Use the Navigation key to highlight one of the following
options:
Call Block
• Any Key — Pressing any key except
,
, or
You can prevent your number from displaying on another phone’s
caller ID screen by enabling Call Block.
answers a call.
• Send Key — Only pressing
answers a call.
1. In standby mode, enter
,
,
.
• Flip Open — Only opening the phone’s flip or pressing
answers a call.
2. Enter the number you wish to call, then press
.
3. Press
calls.
to activate the desired method for answering
Call Functions
24
Silence an Incoming Ring
• Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
ᮣ
During an incoming call, press the Volume key (
)
• Voice Privacy — When set to Enhanced, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection. For this option to work correctly, you must have the
Enhanced privacy option enabled in the Security settings. (This
option is enabled by default.)
on the left side of the phone up or down to silence the
ringer.
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voicemail.
• Location — Turn your GPS location on or set GPS location for
emergency calls only.
ᮣ
During an incoming call, press the Ignore soft key. The
• Chatlink Contacts — Lists the Contacts you have selected as
incoming call is forwarded to Voicemail.
eligible for Chatlink calls.
In-Use Menu
3. Select the desired option or press Cancel to exit the menu.
You can access a number of menus and features even while in a
call.
Calls Logs
Your phone has Call Logs that retain information about Outgoing,
Incoming, and Missed calls. The Calls menu lets you access this
information for future reference, to return calls, and to add new
Contacts. You can also view times and dates for your call and the
total times for all calls.
1. While in a call, press the Mute Unmute soft key to disable/
/
enable the microphone.
2. While in a call, press the Options soft key.
The following options appear in the display:
Tip: To quickly view a list of your most recent calls (Outgoing, Incoming, and
• Speaker On Off — Enables/disables Speakerphone mode.
/
Missed), briefly press the
key in standby mode. The All Calls screen
• Message — Display the Messages menu.
• Contacts — Display the Contacts menu.
• Recent Calls — View your recent calls log.
listing up to 270 of your most recent calls appears in the display.
1. In standby mode, select MENU Calls
➔
.
25
The following Calls Logs appear in the display:
• View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (For more
• Outgoing Calls — Stores and lists records of the last 90 calls you
originated (outgoing) on your phone.
4. Select the desired option.
• Incoming Calls — Stores and lists records of the last 90 calls you
received and answered (incoming) on your phone.
Store Numbers from Call Logs
• Missed Calls — Stores and lists records of the last 90 calls you
received but did not answer (missed).
Store numbers from your Outgoing, Incoming, Missed, and All
calls logs to Contacts.
• All Calls — Lists the up to 270 call records stored in the Outgoing
Calls, Incoming Calls, and Missed Calls logs.
Tip: In standby mode, briefly press
to display the Recent Calls list. You
can then select any call in the list to save to Contacts.
2. Select a Calls Log to appear in the display with the first call
in the list highlighted.
1. In standby mode, select MENU
2. Use the Navigation key to highlight Outgoing Calls
Incoming Calls Missed Calls, or All Calls, then press
3. Use the Up and Down navigation keys to highlight the
number you wish to store in Contacts and press
4. Press the Options soft key, then use the Up and Down
navigation keys to highlight Save
➔
Calls.
,
Tip: To view further information about a particular call, use the Navigation
key to highlight the call, then press
.
,
.
3. Press Options. The following options appear in the display:
.
• Details — Contacts calls only — Lets you view the Contacts entry
for the originator or recipient of this call.
.
5. Select Create New to add the number as a Contacts entry,
or select Update Existing to find a Contact with which to
associate the new number.
• Erase — Erase a selected, unlocked call from this call list.
• Lock Unlock — Blocks/permits erasure of the selected call from
/
this call list.
• Erase all — Erase all unlocked calls from this call list.
6. Follow the prompts to store the number to Contacts.
Call Functions
26
Erase Logs
Call Timer
You can erase any or all calls from individual calls logs (Outgoing
Calls, Incoming Calls, or Missed Calls) or from all calls logs at the
same time (All Calls).
View the duration of your last call, total calls, and calls made
during the life of your phone using the Call timer feature.
Note: Call timer is not for billing purposes.
1. In standby mode, select MENU
➔
Calls.
1. In standby mode, select MENU
➔
Calls
➔
Call Timer. The
2. Use the Navigation key to highlight Outgoing Calls
,
Call Timer screen appears in the display with the first timer
Incoming Calls Missed Calls, or All Calls, then press the
,
in the list highlighted.
key.
2. Use the Navigation key to highlight one of the following
The selected Calls list appears in the display with the first
call in the list highlighted.
timers:
• Last Call — Shows the duration of the last call made with or
3. Press the Options soft key to display a pop-up Options
received by your phone since last being reset.
menu.
• Outgoing Calls — Shows the total number and duration of calls
made with your phone since last being reset.
4. Use the Up and Down navigation keys to highlight Erase all
then press the key.
Erase all entries?” appears in the display.
,
• Incoming Calls — Shows the total number of calls received since
last being reset.
“
• Roaming Calls — Shows the total number and duration of calls
made with or received by your phone while roaming since last
being reset.
5. To Erase all unlocked calls from the selected calls log,
press the Yes soft key.
• All Calls — Shows the total number and duration of all calls made
with and received by your phone since last being reset.
To keep all calls in the selected calls log, press the No soft
key.
• Last Reset — Shows the date and time the call timers were last
reset.
27
• Lifetime Calls — Shows the total number and duration of all calls
made with and received by your phone since being activated.
• Last Reset — Shows the date and time the data counters were
last reset.
3. Press Reset to reset the highlighted timer.
• Lifetime Data Counter — Shows the amount of data (in kilobytes)
that your phone has transmitted and received since being activated.
4. Press Reset All to reset all of the timers except Lifetime
2. To reset a timer other than Lifetime Data Counter, use the
Up/Down navigation keys to highlight the timer you want to
reset and press the Reset soft key.
Calls.
5. Press
to exit the Call Timer screen.
Note: Although Total call timers can be erased, LifeTime call timers can
3. To reset all timers except Lifetime Data Counter, press the
never be erased.
Reset All soft key.
Data Counter
4. Press
to exit the Data Counter screen.
Use Data Counter to view the amount of data that has been sent
or received (or a total of both) using the data services that your
phone supports. The Data Counter can be a helpful tool for
monitoring data usage, especially if your service agreement has
specified limits.
Note: Although other data counters can be reset, the Lifetime Data Counter
can never be reset.
1. In standby mode, select MENU
➔
Calls
➔
Data Counter.
The following counters appear:
• Transmit — Shows the amount of data (in kilobytes) that your
phone has transmitted since last being reset.
• Received — Shows the amount of data (in kilobytes) that your
phone has received since last being reset.
• Total — Shows the amount of data (in kilobytes) that your phone
has transmitted and received since last being reset.
Call Functions
28
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
4. Press the Back soft key or the CLR key (
) to return to
the previous menu.
Navigate Using Menu Shortcuts
Menu Navigation
Access the menus and sub-menus in your phone using the
You can also access menus and sub-menus using menu
numbers. Enter the menu number after displaying the Main Menu
to go directly to the menu or sub-menu of your choice. Before
you can navigate using a shortcut, you’ll need the menu or sub-
menu number that you wish to access.
Navigation key (
shortcut.
) and soft keys (
or
), or use a
1. In standby mode:
•
•
With Shortcut Icon set to On, press the MENU soft key.
1. In standby mode:
With Shortcut Icon set to Off, press the MENU key ( ).
•
•
With Shortcut Icon set to On, press the MENU soft key.
With Shortcut Icon set to Off, press the MENU key ( ).
The Main Menu appears in the display.
2. Press the number of the menu, sub-menu, and so on for
Note: More than one menu may appear in your display. This setting can be
modified in the Display Settings
➔
Menu Style menu. (For more
the feature that you wish to access.
Example: To launch the Calendar tool, select MENU
➔
Tools
➔
Calendar
.
2. Use the Navigation key to browse through the menus.
3. Press
to access a desired menu or sub-menu.
29
Navigation Key Shortcuts — Shortcut Icon On
Shortcut Icons
In standby mode, press the Up or Down Navigation key to launch
that key’s corresponding application in the pattern shown here.
Contacts*
The following icons appear in the second line from the bottom of
the display (provided the display setting Shortcut Icon is set to On
)
and let you launch the associated applications.
Left
Navigation
Right
Navigation
My Metro
MetroWEB
Pocket Express
Metro 411
Loopt
Messages*
Navigation Key Shortcuts — Shortcut Icon Off
In standby mode, press a Navigation key to launch that key’s
corresponding application in the pattern shown here.
Contacts*
ChatLINK
MetroWEB*
@metro*
Mobile IM
mail@metro
Messages*
Note: Shortcuts marked with an asterisk (*) can be changed using MENU
➔
➔
➔
Menu Navigation
30
To launch an application:
1. Highlight the desired Shortcut Icon using the Left and Right
navigation keys.
2. Press OK
(
).
31
Section 5: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad. This section
also describes how to use the T9 predictive text entry system to
reduce the number of key strokes needed to enter text.
•
Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
The current text entry mode (T9 Word Abc, ABC, 123, or Symbols)
,
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
is indicated in the lower part of a text entry screen. To change the
text entry mode while composing a text message:
ᮣ
Repeatedly press and hold
to toggle between Abc,
123, and T9Word modes.
•
T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
Or, do the following:
1. Press the Left soft key.
–
–
–
T9 Word — Enter initial capital letters
T9 WORD — Enter all upper case letters
T9 word — Enter all lower case letters
2. Highlight one of the following text entry modes:
• T9Word
• Abc
•
Abc — Enter letters by repeatedly pressing each phone key until the
desired character (as shown on the key) appears in the display. ABC
mode letter options are:
• ABC
• 123
–
–
–
Abc — Enter initial capital letters
ABC — Enter all upper case letters
abc — Enter all lower case letters
• Symbols
• Add T9 Word
•
123 — Enter numbers by pressing the corresponding keys on the
phone keypad.
3. Press
.
Entering Text
32
®
As you press each key, the
displayed letters change, and
a list of available alternative
words or letter sequences
appears in the lower half of
the screen.
Using T9 Mode
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
1. While composing a text message, press the Left soft key,
When you complete the key
sequence, T9 Word
then select T9Word
.
2. For practice, enter the word “Samsung” by pressing each
recognizes that the most
of the following keys only once:
commonly used word for the key sequence you just
pressed is “Samsung.”
Selecting Alternative Words
S
A
M
S
U
N
G
If more than one word shares the
same key sequence, T9 Word
displays the most commonly used
word in the text you are entering.
T9 Word recognizes that the most commonly used word for
the numeric sequence you just entered is “Samsung.”
If more than one word shares the same numeric sequence,
T9 Word provides the most commonly used word. Press Up
and Down navigation keys to display any other words.
T9 Word lists any available,
alternative words or letter sequences
in the lower half of the text entry
screen.
Note: To enter a space, press the
key. To enter a period, press the
key. These key functions apply to both T9 Word and Abc modes. (For
33
ᮣ
To replace the currently displayed text with an alternative,
Using Abc Mode
highlight the preferred alternative and press
.
1. While composing a text message, press the Left soft key,
then select Abc or ABC
.
Note: To enter a space, press the
key. To enter a period, press the
2. Enter characters while in Abc mode by pressing a key
repeatedly until the desired character appears in the
display.
Adding Words to T9 Word
The T9 Word dictionary may not
contain an obscure word, such as the
latest technical jargon or slang. If you
find you cannot enter a particular
word in T9 Word mode, you can add
the word to the T9 Word dictionary.
Example: Press
once for “G” and twice for “H”.
3. Pause briefly and the displayed character is accepted and
inserted into your message.
4. To enter a space, press
. To enter a period, press
.
1. While composing message
Entering Numbers
text or a text memo, press the
Enter numbers into a text message while in 123 mode.
Left soft key, then select Add T9 Word. The Add T9 Word
screen appears in the display.
1. While composing a text message, press the Left soft key,
then select 123
.
Note: The Add T9 Word screen is locked into Abc text entry mode.
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message.
2. Enter your new word using Abc text entry key sequences.
3. Press
. You are returned to the message/memo text
entry screen.
Entering Text
34
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
1. While composing a text message, press the Left soft key,
then select Symbols. The first of three symbol screens
appears in the display.
2. Use the Prev and Next soft keys to page through the other
symbols, if desired.
3. Press the key that corresponds with the symbol that you
wish to enter.
Example: Press
for an exclamation point (!).
4. Repeat these steps to insert additional symbols into your
message.
35
Section 6: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Tip: You can also access the Find option from standby mode, by pressing the
Contacts shortcut (Up Navigation) key.
• Add New Entry — Add a number or Email address to your
Contacts.
Contacts
Up to 500 entries can be stored in Contacts. Each entry can have
up to five associated phone numbers and one Email address.
Each phone number can be up to 32 digits in length, including
more information), and associated names can be up to 32
characters in length. You can assign the Speed Dial numbers of
your choice for each entry. You can also mark your Contacts list
as Restricted to prevent unauthorized viewing. (For more
• Speed Dial — Assign a Contacts entry to a Speed Dial number.
• Group — Review, send messages to, add Contacts to, or rename
four out of your five groups. (For more information, refer to
• ChatLINK — Launches ChatLINK, a wireless carrier-provided PTT
(Push-To-Talk) application. (For more information, refer to
• Metro411 — Launches Metro411 Directory Assistance. (For more
information, contact your Wireless Carrier.)
Tip: Speed Dial One-Touch Dialing Two-Touch Dialing, and Three-Touch
,
Dialing allow you to call numbers stored in Contacts faster.
• Memory Info — Display used and available memory for Contacts
entries.
Open Contacts
Tip: To launch the Contacts menu using a voice command — In standby
1. In standby mode, select MENU
➔
Contacts. The following
mode, press and hold
until the phone prompts, “Say a command.
”
Say “Go to Contacts” into the microphone.
options appear in the display:
• Find — Find a Contacts entry by name.
2. Use the Navigation key to highlight the option of your
choice, and press
.
Understanding Your Contacts
36
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Note: You can also press the keypad number key that corresponds to the
menu option number.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
•
•
To say the name again, press Repeat
.
To exit VoiceSignal without dialing, press Settings and press Exit
.
Note: The Lookup command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
5. The contact information for the name you selected appears
in the display.
To look up information for a specific contact:
•
•
•
Press
to dial the number associated with the name.
1. In standby mode, press and hold the
key to launch
Press Erase to remove this entry from your Contacts list.
VoiceSignal.
Press the EDIT key ( ) to add or change information for this
entry.
“
Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Lookup”.
•
Press Options and the following options pop-up in the display:
–
Send Txt Msg — Create and send a text message to the selected
Contact.
VoiceSignal prompts you to “Say the name.
”
–
Send Pic Msg — Create and send a picture message to the selected
Contact.
3. Speak clearly and say the full name of the person you want
–
–
Call — Dial the number associated with the Contact name.
to call, exactly as it is entered in your Contacts list.
Send Name Card Via Bluetooth — Send the select Contact’s
information to another Bluetooth device.
•
If VoiceSignal recognizes the name you said, the Contact entry
information for that name appears in the display.
37
Use the Navigation key to highlight an option, then press
highlighted option’s sub-menu appears in the display.
. The
The Find screen appears in the display with the Go To field
highlighted, followed by the first few names in your
Contacts list.
Quick Search Method
Tip: You can also access the Find screen from standby mode by doing one of
the following:
1. In standby mode and with Quick Search enabled, press the
first few numeric keys that correspond to the letters of the
Contact’s name.
– Press the Up Navigation key.
– Select MENU
➔
Contacts
➔
Find.
2. Enter a name as entered in Contacts. For example, if you
Example: To search for “Sally” you would enter 725
.
saved the name as “Amy Smith”, begin the search by
2. Press the Up navigation key. A list of Contact names that
begin with letters corresponding to the number keys you
pressed appears in the display.
pressing
(for “A”).
As you enter letters, the names of the closest matches
appear in the display.
3. Highlight the searched for Contact.
3. When the desired entry is listed in the display, use the Up/
•
•
To call the Contact, press
To view the Contact, press
.
Down navigation keys to highlight the entry.
.
•
•
•
•
Press
to dial the number associated with the name.
Shortcut Key Method
Press Edit to add or change information for this entry.
Press the VIEW key ( ) to show information about the entry.
Press Options. The following options appear in the display:
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly.
1. In standby mode, press Contacts
.
–
–
New Contact — Add a new entry to Contacts.
Erase — Erase the name and associated information.
Understanding Your Contacts
38
–
–
Send Txt Msg — Create and send a text message to the selected
Contact.
3. Use the Navigation key to highlight Create New and press
. The Create New screen appears in the display
showing the following icons:
Send Pic Msg — Create and send a picture message to the selected
Contact.
–
–
Call — Dial the number associated with the name.
Mobile
Pager
Home
Fax
Work
Send Name Card Via Bluetooth — Send the selected Contact’s
information to another Bluetooth device.
Use the Navigation key to highlight an option, then press
highlighted option’s sub-menu appears in the display.
. The
4. Use the Navigation key to highlight the number type that
matches your new entry, then press
Adding a New Contacts Entry
.
You can use either of two methods to add an entirely new entry to
Contacts.
5. Use the keypad to enter a name to associate with the
Contacts entry.
Dial Method
6. Press SAVE to save the entry.
1. Using the keypad, enter the number you wish to add to
Menu Method
your Contacts.
1. In standby mode, select MENU
Entry
➔
Contacts
➔
Add New
2. Press Save. The following options appear in the display:
.
• Create New — Lets you create a new Contacts entry.
The Add New Entry screen appears in the display with the
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
Name field highlighted.
39
3. Use the Up and Down navigation keys to highlight one of
2. Use the Navigation key to highlight the entry and press
VIEW. The View Contact screen appears in the display
showing the highlighted entry’s information.
the following fields:
• Mobile
• Home
3. Use the Navigation key to review the information for the
entry that you wish to change, then press EDIT. The Edit
Contact screen appears in the display.
• Work
• Pager
• Email
4. Use the Navigation key to highlight the particular
• Group
information you want to add or change.
• Ringtone
•
•
Press
to backspace and delete numbers or letters.
• Fax
Press and hold
field.
to clear all numbers or letters in the highlighted
4. Enter a phone number in the highlighted field.
5. Repeat steps 3 and 4 as needed.
•
Press Options. The following options popup in the display:
–
Set Speed Dial Remove Speed Dial — Assign/remove a speed dial
/
6. Press
to save the new entry.
Editing a Contacts Entry
–
Set as default — Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
Editing Contacts Name and Numbers
–
–
Wait — A hard pause (waits for input from you).
Use the Up/Down navigation keys to highlight the desired option, then
press
.
Understanding Your Contacts
40
5. When you’re finished changing the contents of a field,
press . Your changes are saved and a confirmation
message appears in the display.
3. Press Options. The following pause options appear in the
Add Pauses to Contacts Numbers
display:
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Use the Up/Down navigation keys to highlight the pause
option of your choice.
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
5. Press
sequence.
to enter the highlighted pause into the number
•
Wait — Stops the calling sequence until the phone receives further
input.
•
2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
6. When you’re finished entering information, press
to
store the number to Contacts.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
recall the number from Contacts.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
2. If you stored the number using Wait(s), recall the number
from Contacts and wait for the appropriate prompt from
the dialed number.
3. Press
to dial the number.
41
Edit an Existing Email Address
2. Use the Up/Down navigation keys to highlight the desired
Contact, then press Edit
.
The Edit Contact screen appears in the display.
3. Use the Up/Down navigation keys to highlight the Picture
2. Use the Up/Down navigation keys to highlight the desired
ID field (at the top of the Edit Contact screen), then press
Contacts entry, then press Edit
.
Set.
The Edit Contact screen appears in the display.
The My Images screen appears in the display, showing a
series of thumbnail images. (For more information, refer to
3. Use the Up/Down navigation keys to highlight the Email
field.
4. Use the Up/Down navigation keys to highlight the image
that you wish to assign to the Contacts entry, then press
.
5. Press
to save your changes.
The Edit Contact screen re-appears in the display with a
thumbnail view of the selected image in the Picture ID
field.
Assigning a Picture to a Contacts Entry
When you assign a picture to a Contacts entry, the picture that
you assigned to the entry appears in the display when you
receive a call from that Contact.
5. Press
to save the picture assignment to the selected
Contacts entry.
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
Understanding Your Contacts
42
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
5. Use the Up/Down navigation keys to highlight the ringtone
or sound that you wish to assign to the Contacts entry,
then press
.
The Edit Contact screen re-appears in the display with the
name of the selected file in the Ringtone field.
2. Use the Up/Down navigation keys to highlight the desired
6. Press
to save the ringer assignment to the selected
Contact, then press Edit
.
Contacts entry.
The Edit Contact screen appears in the display.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
3. Use the Up/Down navigation keys to highlight the Ringtone
field, then press Set
.
The Contact Tone menu appears in the display showing the
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
following options:
• My Ringtones
1. Press
to end your call. The call time, length of call,
• My Sounds
phone number, and name of the party (if available) appear
in the display.
4. Use the Up and Down Up/Down navigation keys to
highlight the desired option, then press
.
2. Press Save. The following options appear in the display:
The My Ringtones or the My Sounds file list appears in the
• Create New — Lets you create a new Contacts entry.
display.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
43
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
field and the first Contacts entry highlighted.
2. Find the Contacts entry to which you want to add the new
Create a New Entry
1. Use the Navigation key to highlight Create New and press
. The Create New screen appears in the display
showing the following number type options:
3. Press
. The following number type options appear in
the display:
Mobile
Pager
Home
Fax
Work
Mobile
Pager
Home
Fax
Work
Number types that are already assigned a number show
the number instead of the number type label.
2. Use the Navigation key to highlight the number type that
matches your new entry, then press
.
4. Use the Up/Down navigation keys to highlight the desired
unassigned number type, then press
. The Contacts
page 32 for more information).
entry information appears in the display with the new
number posted in the appropriate number type field.
4. Press
. The new entry is saved to your Contacts list.
5. Press
again to save your changes to the existing entry.
Add to an Existing Entry
Speed Dial
1. Use the Up/Down navigation keys to highlight Update
Existing and press
. The Update Existing screen appears
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
in the display showing your Contacts list with the Go To
Understanding Your Contacts
44
• Wait — A hard pause (waits for input from you).
Example: To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold , (1-touch dialing).
• 2-Sec Pause — A 2-second pause after which dialing resumes
information).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold , (2-touch dialing).
Use the Up/Down navigation keys to highlight Set Speed
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press , then press and hold , (3-touch dialing).
Dial, then press
. The Speed Dial screen appears in the
display.
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
4. Use the Up/Down navigation keys to highlight an
Unassigned Speed Dial number or enter an Unassigned
Speed Dial number in the Go To field using the keypad.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.
These numbers are already assigned to such services as
Voicemail (001), Information (411), Customer Care (611), and
emergency use (911).
a name for the entry.
5. Press SET. You are prompted to confirm your Speed Dial
2. After entering the Contacts entry name, do not press
.
number assignment.
Instead, use the Up/Down navigation keys to highlight the
number field.
6. Press the Yes to save your Speed Dial assignment and
return to the Add New Entry screen.
3. Press Options. The following options appear in the display:
Note: Press No to discard the assignment and return to the Speed Dial
• Set Speed Dial — Assign a speed dial number.
screen.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
7. Press
to save your changes.
45
Changing a Speed Dial Location
7. Press the Yes to remove the Speed Dial assignment.
Speed Dial Removed” pops up in the display, and you are
“
returned to the Edit Contact screen.
2. Use the Up and Down navigation keys to highlight the
desired entry.
Contacts Groups
3. Press Edit. The Edit Contact screen appears in the display.
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
4. Use the Up and Down navigation keys to highlight the
number field marked by the Speed Dial icon (
).
5. Press Options. The following options appear in the display:
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
• Remove speed dial — Unassign the current speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
• Wait — A hard pause (waits for input from you).
Group.
• 2-Sec Pause — A 2-second pause after which dialing resumes.
6. Use the Up/Down navigation keys to highlight Remove
Speed Dial, then press
. “Remove speed dial?” pops up
2. Use the Up and Down navigation keys to highlight the
in the display to confirm your desire to remove the entry.
Group field, the press Set
.
Understanding Your Contacts
46
The Select Group screen appears in the display showing
• Business
• Colleague
Groups similar to the following:
• Family
• No Group
• Friends
• Business
2. Use the Navigation key to highlight a Group, then press
• Colleague
Options
.
• Family
• Friends
The following options pop-up in the display:
3. Use the Up and Down navigation keys to highlight the
Group to which you want to assign the selected Contact,
• Send Txt Msg
• Send Pic Msg
then press
You are returned to the Add New Entry
and the selected Group name populates the Group field.
4. Press to save your changes.
.
• Rename
• Erase
/
Edit Contact screen
• Add
3. Use the Navigation key to highlight Add, then press
.
The Add Contacts screen appears in the display showing a
Using Group Add Option
list of Contacts entries.
The Add option lets you add one or more existing Contacts to a
Group.
4. Do one of the following:
1. In standby mode, select MENU
➔
Contacts
➔
Group.
•
•
Use the Navigation key to highlight an entry you want to add to the
group, then press MARK. A check mark appears in the entry’s
check box.
The Group List screen appears in the display showing
Groups similar to the following:
• No Group
Repeat as needed to check all the desired Contacts.
Press Mark All
.
47
3. Use the Navigation key to highlight Rename, then press
Note: To unmark a marked Contact, highlight the Contact and press MARK to
.
clear the check mark.
The Rename Group screen appears in the display.
5. When you have marked the Contacts you want to add to
the group, press Done. “Contact added to group” appears in
the display, followed by the selected Group list including
the added Contacts.
5. When you have completed your changes to the Group
name, press SAVE
Group Renamed” appears in the display followed by the
Group List screen showing your renamed Group.
.
Rename a Group
“
The Rename option lets you change the name any of the Groups,
except No Group.
1. In standby mode, press MENU
➔
Contacts
➔
Group. The
Add a New Group
Group List screen appears in the display.
The New option lets you add Groups.
2. Use the Navigation key to highlight the Group name other
than No Group that you wish to change, then press
Options. The following options pop-up in the display:
1. In standby mode, press MENU
➔
Contacts
➔
Group. The
Group List screen appears in the display.
2. Press New. The New Group screen appears in the display.
• Send Txt Msg
• Send Pic Msg
• Rename
• Erase
4. When you have completed entering the new Group name,
press SAVE. “Group Saved” appears in the display followed
by the Group List screen showing your new Group.
• Add
Understanding Your Contacts
48
Erase a Group
The Erase option lets you delete a Group, thus freeing you to
2. Use the Up/Down navigation keys to highlight the Contact
reassign the Contacts formerly in the Group.
that you wish to delete, then press Options
.
1. In standby mode, press MENU
Group List screen appears in the display.
2. Use the Up/Down navigation keys to highlight the Group
that you wish to delete, then press Options
➔
Contacts
➔
Group. The
The following options popup in the display:
• New Contact
• Erase
.
• Send Txt Msg
The following options popup in the display:
• Send Pic Msg
• Call
• Send Txt Msg
• Send Name Card Via Bluetooth
3. Select Erase. The phone prompts you to confirm the
erasure.
• Send Pic Msg
• Rename
• Erase
• Add
4. Press Yes to erase the selected Contact. Press No to retain
3. Use the Navigation key to highlight Erase, then press
.
the Contact.
You are prompted to confirm the Group erasure.
4. Press Yes to confirm erasure of the Group. Press No to
retain the Group.
Deleting a Contacts Entry
49
Launching ChatLINK
ChatLINK™
ᮣ
In Standby mode, press MENU
Contacts ChatLINK
➔
ChatLINK is a downloadable Push-To-Talk (PTT) application
provided by your Wireless Carrier. ChatLINK lets you conduct PTT
calls with selected Contacts or Groups.
➔
.
The ChatLINK List screen appears
in the display. The ChatLink status
icon also appears in the display, if
not already present.
Obtaining ChatLINK
1. In standby mode, press MENU
Contacts ChatLINK
➔
➔
.
If ChatLINK is not present on your
Setting Up ChatLINK
phone, “Can’t find application on
To make/receive ChatLINK calls, set your
ChatLINK status, and manage your
ChatLINK Contacts and Groups, follow
instructions provided by your Wireless
Carrier and/or access the ChatLINK help
information on your phone.
phone. Click Yes to search catalog
appears in the display. (For more
”
2. Press the Yes soft key. The @metro Mobile Shop catalog
ᮣ
In the ChatLINK List screen, press
appears in the display.
the Options soft key and select
3. Select and download the ChatLINK application.
ChatLINK Help. The ChatLINK Help screen appears.
4. Follow prompts and information from your Wireless Carrier
Metro411
to setup ChatLINK on your phone.
The 411 menu option lets you access Metro411 Directory
Assistance service.
1. In standby mode, press MENU
➔
Contacts
➔
Metro411.
Understanding Your Contacts
50
A
Metro411 Directory Assistance screen appears in the
The Memory Info Contacts screen appears in the display
showing the Total amount of memory in your phone, the
amount of memory Used to store Contacts entries, and the
remaining (Free) for Contacts entries.
display.
Note: For more information about Metro411 Directory Assistance service, contact
your Wireless Carrier.
If Metro411 is not present on your phone, “Can’t find
application on phone. Click Yes to search catalog” appears
2. Press the Yes soft key. The @metro Mobile Shop catalog
appears in the display.
3. Select and download the Metro411 application.
4. Follow prompts and information from your Wireless Carrier
to setup Metro411 on your phone.
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
ᮣ
In standby mode, select MENU
➔
Contacts
➔
Memory Info.
51
Section 7: @metro
With Mobile Shop, you can download full featured applications
over the air including games, personalized ring tones, pictures,
and more. You can send and receive instant messages and e-
mail, or browse the web to catch up on all the latest news.
1. At the @metro menu, select Mobile Shop
(
).
Your phone takes a moment to connect, then the Mobile Shop
Catalog menu appears in the display.
Follow the instructions in your phone’s display.
This section outlines how to obtain games and other applications
for your phone. For more information, contact your Wireless
Carrier.
Please check with your Wireless Carrier for availability of
applications.
Launching
1. In standby mode, do one of the
@metro
Changing Your
Use the Settings menu in Mobile Shop to manage, move, order
@metro Settings
following to launch @metro:
applications, and much more.
1. At the @metro menu, select Settings
(
). The following
•
•
Press @metro soft key.
Press MENU @metro
options appear in the display:
➔
➔
@metro.
The @metro menu appears in the
display as shown.
• Order Apps — Download applications over the network.
• Move Apps — Move previously downloaded applications between
available folders.
Applications Shopping and Downloading
(Mobile Shop)
• Manage Apps — View used and available memory. Remove
applications.
Download games, ring tones, e-mail, and more using Mobile
Shop.
• Main Menu View — Select whether to view the main Mobile Shop
menu in a list or icon format.
• View Log — View the Mobile Shop log, which displays information
about recent activity using Mobile Shop.
Note: For information on airtime charges, contact your Wireless Carrier.
@metro
52
2. Select the desired option to enter the option’s sub-menu
demo app, you will be presented with a purchase option so you
won’t have to look for the app in the Mobile Shop catalog.
and view or change settings.
Removing Apps
Using On-line Help
You may remove apps that are no longer needed. When you
remove an app, you cannot use the application unless you
purchase it again. To remove an app, choose Settings > Manage
Apps. Then, select the app you want to remove.
The Help sub-menu within @metro is a short tutorial on several
@metro-Mobile Shop features. View information about charges,
cancelling subscriptions, buying apps, disabling apps, and more.
1. At the @metro menu, select Help (
). The Help subjects
Disabled Apps
described in the following subsections appear in the
display.
You can install new apps even if the memory of your phone is full
by partially removing (disabling) apps you haven’t used recently.
When you need to use a disabled app, you can restore it at no
additional purchase cost.
2. Highlight the desired Help subject.
3. Press
to view the selected Help information.
Restoring Apps
Buying New Apps
Disabled apps can be quickly restored at no additional purchase
cost. To restore an app, run the application you want to restore
from the Main Menu. You will be guided through the restoration
process.
To buy new and exciting apps, visit the Mobile Shop catalog. It
provides you with a variety of apps you can choose from.
What do I pay?
When you buy an app, you will be charged for the purchase cost
of the app and the network connections to download it.
Expired Apps
Apps that were purchased based on the number of uses or time
expire. You can purchase additional uses from the Mobile Shop
catalog.
Demo Apps
A Demo app is free and is designed to demonstrate the app’s
main features. It usually expires after a certain period of time or a
number of uses and often has limited functions. When you run a
53
Section 8: Messages
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Tip: To launch the Create Txt Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Text” into the microphone. You are then prompted
to say a Contact name or a number for the first recipient of the
message.
Types of Messages
Your phone is able to send and receive Text messages and
Picture messages to compatible phones and devices. Text
messages can be up to 160 characters in length. Picture
messages can contain up to 1000 characters of message text.
2. Select a Contact as recipient by pressing the Add soft key
or enter the phone number or e-mail address of the
recipient, then press OK
(
). The Text: field appears in
the display.
Note: Available memory is shared between all messages. You can store up to
100 messages. However, the exact number is dependent upon
message length.
3. Enter the text content of your
message using the keypad. (For
Create and Send Text
Messages
1. In standby mode, select MENU
➔
At any point while composing a
message:
Messages Send Message
➔
➔
Text
Message. The Create Txt Msg
screen appears in the display
showing the To: list.
•
To change the text entry mode, press
the Left soft key. The following text
entry options appear in the display:
–
–
T9 Word
Abc
Messages
54
–
–
–
–
ABC
Receive Text Messages
When you receive a message in standby mode, the ringer sounds
(unless turned off) and New Message appears in the display along
with the closed envelope icon (
123
Symbols
Add T9 Word
). The date and time of the
•
Select the desired option.
message also appear in the display along with the following
options:
4. Press the Options to complete the message text and set
message send options. The following options appear in the
display:
•
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
• Edit Send To — Edit the recipient’s number or e-mail address.
• Add Quick Text — Insert pre-composed text in your message.
• Save As Draft — Save the message to your Draft folder.
View Later — Saves the message to your Inbox, where you can view
it later, then returns your phone to standby mode.
Highlight your choice, then press
.
• Priority Level — Choose High or Normal
.
Receive Messages While in a Call
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon (
The date and time of the message also appear in the display
along with the following options:
).
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
• Add To Contacts — Save the recipient’s number or e-mail address
as a Contacts list entry.
5. Once you’re finished composing your message, press Send
•
View Later — Saves the message to your Inbox, where you can view
it later, and returns your phone to call mode.
(
).
Highlight the desired option, then press
.
55
View Text Messages Now — Chat View
•
To access additional options, press the Options soft key:
–
View Last Message — Lets you view details about the last message
in the Chat with screen.
When you exchange a series of text
messages with a single Contact or
number, your incoming messages and
your sent messages will appear as if
they were a “chat session”.
–
Add to Contacts — Adds the originator of an incoming text message
to your Contacts list.
View a Text Message Now — Normal View
You can choose to view your incoming text messages individually
by using Normal View.
Tip: If you prefer, you can view your messages
individually. (For more information, refer
View” .)
Note: To use Normal View, you must set the Msg Settings
➔
Text Message
➔
1. View your incoming text message(s) in Auto View or View
1. After you select the View Now option, the new text
message appears in the display.
2. While viewing your message press Options. The following
options appear in the display:
•
•
indicates an incoming text message.
indicates an outgoing text message.
• Forward — Send a copy of this message to another recipient.
2. You have the following available options:
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
•
To reply to the latest incoming text message, press Reply
(
),
and select Text Message
.
• Save Quick Text — Save the text in this message as a new Quick
Text.
Note: Only text messages appear in the Chat with screen.
•
To erase selected or All messages listed in the Chat with screen,
press the Erase soft key.
• Lock
/
Unlock — Block/permit erasure of the highlighted
message.
Messages
56
• Add To Contacts — Save the sender’s number to your Contacts.
3. Press
. The new Chat View
• MessageInfo — Shows message delivery status, addressee, size,
session or text message appears
in the display.
and so on.
• Extract — Lets you call the originator of the highlighted message.
Send Picture Messages in
Camera Mode
Picture messages can be sent to
3. Highlight an option, then press
to perform the function
for the highlighted option.
recipients with compatible phones or
devices. You can even accompany a
Picture message with a voice memo or preloaded sound.
View a Text Message Later
Tip: You can send a Picture message to
up to ten recipients. Enter each
recipient’s address or phone number
in a separate Send to field of the
Picture message composer.
1. In standby mode, select MENU
Messages Inbox. The Inbox
appears in the display.
➔
➔
2. If the new Chat View session or
text message is not highlighted,
use the Up and Down navigation
keys to highlight it.
1. In standby mode, press and
hold the Camera key
(
). The camera
viewfinder screen appears
in the display.
Note: To select Chat View or Normal View, use the Msg Settings
➔
Text Message
➔
Message View option. (For more information, refer to
57
2. Using the display as a viewfinder, when the image that you
6. Press the Down navigation key
until the Text field is highlighted,
then enter the message text using
the keypad. (For more information,
wish to send appears in the display, press the Take key
(
) to take a picture.
Note: For more information about using the camera feature in your phone,
3. Press the Send key ( ) to save
the picture and begin delivery
process. The Create Pic Msg screen
then appears in the display with
the Send To list highlighted.
7. Your new picture appears in the
Picture field.
8. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound field
and do the following; otherwise, proceed to step 10.
4. Enter the phone number or e-mail
•
Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
address of the recipient of the
Picture message, then press the
key.
–
Record New — Record a new memo to insert into the message.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
,
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
5. The Subject field appears in the display. Enter a subject for
the Picture message using the keypad. (For more
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Use the Up/Down navigation keys to highlight an option, then press the
key to select the option and insert a sound into your message.
Messages
58
Press
to exit the pop-up menu without inserting a sound.
Send Picture Messages in Standby Mode
9. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
•
•
•
•
•
Preview — View the picture as the recipient will see it.
Add Quick Text — Add pre-computes text to your message.
Save As Draft — Save the message to your Draft folder.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send To field of the
Picture message composer.
Priority Level — Choose High Normal, or Low.
,
1. In standby mode, select MENU
Messages Send Message
Picture Message
➔
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
➔
➔
.
Time
.
The Create Pic Msg screen then
appears in the display showing the
To: list.
•
Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
•
•
•
Remove Pic — Remove the picture from your message.
Remove Sound — Remove the sound file from your message.
Tip: To launch the Create Pic Msg screen using a
Add To Contacts — Save the recipient’s number or e-mail address
as a Contacts list entry.
voice command — In standby mode, press and hold
until the phone
prompts, “Say a command.” Say “Send Picture” into the microphone.
You are then prompted to say a Contact name or a number for the first
recipient of the message.
Use the Up/Down navigation keys to highlight an option,
then press the
10. Press the
key to invoke the option.
2. Enter the phone number or e-mail address of the recipient
key to send the message. “Pic Msg Sending
”
using the keypad, then press the
key.
appears in the display and a progress bar indicates the
send status.
59
6. Use the navigation keys to highlight a picture to be added
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
,
to your message, then do the following:
•
If you want, press the View soft key to expand the highlighted
picture to full-screen size.
3. The Subject field appears in the
display. Enter a subject for the
Picture message using the keypad.
•
If you want to include a new picture, press the Camera soft key.
Note: For more information about using the camera feature in your phone,
•
Press the
key to add the highlighted picture to your message.
You are returned to the Create Pic Msg screen with the
4. Press the Down navigation key
selected picture in the Picture field.
until the Text field is highlighted,
then enter the message text using the keypad. (For more
7. If you wish to insert a sound into
your Picture message, use the
Down navigation key to highlight
the Sound field and do the
following; otherwise, proceed to
step 8.
5. Press the Down navigation key
until the Picture field is highlighted,
then press the Picture soft key. A
photo gallery of thumbnail images
appears in the display.
•
Press the Sounds soft key. The My
Sounds screen appears in the display
showing the following options:
–
Record New — Record a new memo to insert into the message.
Messages
60
• Add To Contacts — Save the recipient’s number or e-mail address
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
as a Contacts list entry.
Use the Up/Down navigation keys to highlight an option,
then press the
9. Press the
key to invoke the option.
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
key to send the message. “Pic Msg Sending
”
appears in the display and a progress bar indicates the
send status.
Use the Up/Down navigation keys to highlight an option, then press the
key to select the option and insert a sound into your message.
Press
to exit the pop-up menu without inserting a sound.
Receive Picture Messages
When you receive a Picture Message in standby mode, the ringer
sounds (unless turned off) and New Message appears in the
display along with the closed envelope icon ( ).
8. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
• Preview — View the picture as the recipient will see it.
• Add Quick Text — Add pre-computes text to your message.
• Save As Draft — Save the message to your Draft folder.
The date and time of the message also appear in the display
along with the following options:
•
View Now — Retrieves and opens the message, where you have the
option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
•
Priority Level — Choose High, Normal, or Low.
•
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time
.
Use the Up and Down navigation keys to highlight the desired
option, then press the key.
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
View a Picture Message Later
1. In standby mode, select MENU
Inbox appears in the display.
• Remove Pic — Remove the picture from your message.
➔
Messages
➔
Inbox. The
• Remove Sound — Remove the sound file from your message.
61
2. If the new picture message is not highlighted, use the Up
3. While viewing your message press the Options soft key.
and Down navigation keys to highlight the new message.
The following options appear in the display:
• Play Again — Play the sound file included in the picture message
3. Press the
key. “Connecting” appears in the display
again.
followed by “Retrieving” and a progress bar indicating that
• Forward — Send a copy of this message to another recipient.
the message is downloading to your phone.
• Erase — Messages with Sound files only — Erase this message
from your messages Inbox folder.
4. Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
• Save Pic — Save the picture included in this message to the My
Images folder.
• Save Sound — Messages with Sound files only — Save the
sound file included in this message to the My Sounds folder.
• Save Quick Text — Save the text in this message as a new Quick
Text.
Note: For more information on viewing and managing received picture
• Lock Unlock — Block/permit erasure of the highlighted
/
View a Picture Message Now
message.
1. After you select the View Now option, “Connecting
”
• Add To Contacts — Save the sender’s number to your Contacts.
appears in the display followed by “Retrieving” and a
progress bar indicating that the message is downloading
to your phone.
• Message Info — Shows message delivery status, addressee, size,
and so on.
• Extract — Lets you call or send a message to the originator of this
message.
2. After the Picture message has downloaded, an alert
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
4. Use the Up/Down navigation keys to highlight an option.
Press
to perform the function for the highlighted
option.
Messages
62
4. Follow prompts and information from your Wireless Carrier
Note: For more information on received picture message options, see
to setup Metro411 on your phone.
IM (Instant Messaging)
Mobile Instant Messaging lets you use your Tint™ to access your
IM account.
E-Mail Messaging
mail@metro lets you use your Tint™ to access your on-line e-
mail account to receive and send e-mail messages.
SM
1. In standby mode, select MENU
➔
Messages
➔
IM.
1. In standby mode, select MENU
➔
Messages
➔
Email.
An IM account screen appears in the display.
An E-mail account screen appears in the display.
Tip: You can also launch launch IM from standby mode by selecting the
Mobile IM shortcut ( ).
Tip: You can also launch launch mail@metro from standby mode by selecting
the mail@metro shortcut ( ).
Note: For more information about Metro411 Directory Assistance service, contact
SM
Note: For more information about mail@metro service, contact your Wireless
your Wireless Carrier.
Carrier.
If Mobile Instant Messaging is not present on your phone,
SM
If mail@metro is not present on your phone, “Can’t find
“
Can’t find application on phone. Click Yes to search
application on phone. Click Yes to search catalog” appears
2. Press the Yes soft key. The @metro Mobile Shop catalog
2. Press the Yes soft key. The @metro Mobile Shop catalog
appears in the display.
appears in the display.
3. Select and download the Mobile Instant Messaging
SM
3. Select and download the mail@metro application.
application.
63
4. Follow prompts and information from your Wireless Carrier
• Reply With Copy — Text messages only — Compose and send a
reply message to the originator of this message and include a copy
of the original message.
to setup Mobile Instant Messaging on your phone.
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
• Erase — Messages with Sound files only — Erase this message
from your messages Inbox folder.
• Save Pic — Save the picture included in this message to the My
Images folder.
Inbox
• Save Sound — Messages with Sound files only — Save the
sound file included in this message to the My Sounds folder.
Received messages of all types (except Voicemail) are stored in
the Inbox.
• Save Quick Text — Save the text in this message as a new Quick
Text.
1. In standby mode, select MENU
➔
Messages
➔
Inbox. A list
• Lock Unlock — Block/permit erasure of the highlighted
/
of incoming messages appears in the display.
message.
Tip: While in a call, press Options, then select Message to open the Messages
• Add To Contacts — Save the sender’s number to your Contacts.
menu.
• Erase Inbox — Text messages only — Prompts you to erase or
retain all unlocked messages in the Inbox folder.
2. Use the navigation keys to highlight the message that you
• Message Info — Shows message delivery status, addressee, size,
and so on.
wish to view.
3. Press
to view contents of the highlighted message.
• Extract — Lets you call or send a message to the originator of this
message.
4. While viewing your message press Options. The following
5. Use the Up/Down navigation keys to highlight an option.
options appear in the display:
Press
to perform the function for the highlighted
• Play Again — Play the sound file included in the picture message
again.
option.
• Forward — Send a copy of this message to another recipient.
Messages
64
Managing Inbox Messages
Outbox
1. In standby mode, select MENU
➔
Messages
➔
Inbox. A list
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or E-Mail was successfully received by enabling
the Delivery Ack feature.
of incoming messages appears in the display.
2. Highlight a message in the list.
3. Press Erase to remove the highlighted message from the
Review Messages in the Outbox
Inbox.
1. In standby mode, select MENU
Your list of sent messages appear in the display.
2. Highlight a message that you wish to review, then press
OPEN
➔
Messages
➔
Outbox.
4. Press Options. The following options appear in the display:
• Reply — Compose and send a reply message to the originator of
this message.
.
• Reply With Copy — Text messages only — Compose and send a
reply message to the originator of this message and include a copy
of the original message.
3. While viewing your message, press Options. The following
options appear in the display:
• Forward — Send a copy of this message to another recipient.
• Play Again — Picture messages only — Play the sound file
• Lock Unlock — Block/permit erasure of the highlighted
/
included in the picture message again.
message.
• Forward — Send the highlighted message to another recipient.
• Add To Contacts — Save the sender’s number to your Contacts.
• Erase — Picture messages only — Erase this message from your
messages Outbox folder.
• Erase Inbox — Prompts you to erase or retain all unlocked
messages in the Inbox folder.
• Lock Unlock — Block/permit erasure of the highlighted
/
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
message.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
5. Highlight an option, then press
to perform the function
for the highlighted option.
• Add To Contacts — Save the recipient’s number to your Contacts.
65
• Message Info — Shows message delivery status, addressee, size,
• Erase Outbox — Delete all unlocked messages from the Outbox.
and so on.
• Message Info — Shows message delivery status, addressee, size,
and so on.
• Extract — Lets you call or send a message to the originator of this
message.
4. Highlight an option, then press
to perform the function
4. Highlight an option, then press
to perform the function
for the highlighted option.
for the highlighted option.
Draft Box
Messages and Lock Mode
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Create a Draft Message
Managing Outbox Messages
1. In standby mode, press the Down navigation key. The
Create Text Msg screen appears in the display showing the
To: list.
1. In standby mode, select MENU
➔
Messages
➔
Outbox.
Your list of sent messages appear in the display.
2. Highlight a message, then press Erase to remove the
2. Enter the phone Number or E-Mail address of a recipient,
highlighted message from the Outbox.
then press
3. Compose your message using the keypad, then press
Options
.
3. Press Options. The following options appear in the display:
• Forward — Send the highlighted message to another recipient.
.
• Resend — Re-send the highlighted message to the original
recipient.
4. Select Save As Draft. A confirmation message appears in
the display and your message is saved to the Drafts box.
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
• Add To Contacts — Save the recipient’s number to your Contacts.
Messages
66
View and Edit Draft Text Messages
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
1. In standby mode, select MENU
➔
Messages
➔
Drafts. A list
• Add To Contacts — Save the recipient’s number or e-mail address
to your Contacts.
of any draft messages that you’ve saved appears in the
display.
5. Highlight the desired option, then press
to perform the
2. Highlight a text message that you wish to view or edit, then
press Edit. The message text edit screen appears in the
display.
function for the highlighted option.
6. When you have completed composing your message,
press Send
.
3. Enter or change the recipient’s number and/or e-mail
address and the message text using the keypad. (For more
Managing Draft Messages
1. In standby mode, select MENU
➔
Messages
➔
Drafts. A list
of any draft messages that you’ve composed appears in
the display.
4. Press Options to complete the message text and set
message send options. The following options appear in the
display:
2. Highlight a message.
3. To remove the highlighted message from the Drafts box,
press Erase. You are prompted to confirm erasure of the
highlighted draft message.
• Edit Send To — Change, add, or remove recipients from this
message.
• Add Quick Text — Insert pre-composed text into your message
text.
•
•
To erase this draft message, press Yes
.
• Save As Draft — Save the message to your Drafts box.
To keep this draft message in your Drafts box, press No
.
• Priority Level — Choose High or Normal
.
4. For other options, press Options
.
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
67
The following options appear in the display:
•
Listen Later — Returns you to standby mode where you can later
choose to call your mailbox and review your messages.
• Send — Send the highlighted message to the original recipient, if
the recipient’s number and/or e-mail address is included with the
draft message.
Highlight the desired option, then press
.
Listen to Voicemail Later
• Lock Unlock — Block/permit erasure of the highlighted
/
If you choose to review your voicemail messages at a later time:
1. In standby mode, press the Down navigation key, then
select Voicemail. The Voicemail screen appears in the
display, showing the number of new voicemail messages
received and the date and time the latest message was
received.
message.
• Add To Contacts — Save the recipient’s number and/or e-mail
address to your Contacts.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
• Erase Drafts — Delete all unlocked draft messages.
5. Highlight an option, then press
to perform the function
2. Highlight a voice message.
for the highlighted option.
3. Press
or
to call your voice mailbox and listen to
Voicemail
the message.
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
Callback # (if available), Urgency, and other details of the
Voicemail message.
Note: You can also press and hold
to dial your voice mailbox.
Erase Messages
Listen to Voicemail Now
Using Erase Messages, you can erase all of the messages in
each of your boxes from one convenient location.
Once you’ve received a new voicemail message, you have the
option to either:
Note: This function erases all messages in a selected box. To delete a single
message, open the box from the Messages menu, highlight a message,
open the message if you want, then press Erase to delete it.
•
Listen Now — Calls your voice mailbox and allows you to listen to
your messages.
Messages
68
1. In standby mode, select MENU
➔
Messages
➔
Erase
• Auto Erase — Choose to receive (On) or not receive (Off) a
warning message when you delete a message.
Messages. The following options appear in the display:
• Quick Text — Edit your pre-composed messages, which can then
be inserted into new messages.
• Inbox — Deletes all unlocked messages stored in the Inbox.
• Outbox — Deletes all unlocked messages stored in the Outbox.
• Drafts — Deletes all unlocked messages stored in the Drafts box.
• Voicemail # — Edit or view your Voicemail number.
• Entry Mode — Choose the default method for entering text into
• All Messages — Deletes all unlocked messages stored in all of the
message boxes, except Voicemail.
messages (T9 Word Abc, ABC, 123).
,
• Callback # — Choose whether to include a callback phone
number with your outgoing messages, and enter the number to be
included.
2. Highlight the box containing the messages that you wish to
delete, then press
. You’re prompted to confirm the
• Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
erasure of all messages in the selected box or in all boxes.
3. Press Yes to delete the messages. Press No to cancel
• Reminder — Select whether and how often you will hear and/or
feel a reminder that you have received a message (Once Every 2
,
deleting the messages.
Minutes
2. Highlight the desired option with the Navigation key.
3. Press to enter the highlighted option’s sub-menu.
,
Every 15 Minutes, Off).
Message Settings
Use the Msg Settings sub-menus to define general settings and
text message settings.
Editing and Entering Quick Text
General Message Settings
1. In standby mode, select MENU
1. In standby mode, select MENU
➔
Messages
➔
Msg
➔
Messages
➔
Msg
Settings
appears in the display.
2. To create a new Quick Text:
Press New
➔
General
➔
Quick Text. The Quick Text sub-menu
Settings
➔
General. The following options appear in the
display:
• Auto Save — Choose whether your messages are saved
automatically when you exit them (On Off Prompt).
,
,
•
.
69
Text Message Settings
1. In standby mode, select MENU
Tip: You can also create new Quick Text by viewing/editing an Outbox or
Drafts message and using the Save Quick Text option in the Options
➔
Messages
➔
Msg
Settings
➔
Text Message. The following options appear in
the display:
•
•
Enter/change the text content of your Quick Text using the keypad.
• Auto View
—
On/Off — With Auto View On, the full content of a
text message appears in the display as the messages is received.
–
To change Text Input Mode, press the Left soft key.
• Signature — Create a signature, which can be included at the
bottom of outgoing message text.
Once you’re finished entering your Quick Text, press OK. The Quick
Text menu appears in the display with your new Quick Text
highlighted.
• Auto Scroll
—
On/Off — With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screen-
full at a time.
3. To change a Quick Text:
•
Highlight a Quick Text you want to change, then press Edit. (You
cannot change the pre-defined Quick Text included with your
phone.)
• Message View
incoming text messages one at a time or to display text messages
(outgoing and incoming) in a Chat-style view.
—
Chat/Normal — Set Messaging to display
2. Highlight the desired option with the Navigation key.
Note: You cannot change or erase pre-loaded Quick Texts.
3. Press
to enter the highlighted option’s sub-menu.
•
Enter/change the text content of your Quick Text using the keypad.
Picture Message Settings
1. In standby mode, select MENU
➔
Messages
➔
Msg
4. To erase a Quick Text:
Settings
➔
Picture Message. The following options appear
•
Highlight a Quick Text you want to erase, then press Erase. You are
prompted to confirm erasure of the highlighted Quick Text.
in the display.
•
To erase the highlighted Quick Text, press Yes. To keep it, press No
.
• Auto Receive — On/Off — With Auto Receive On, Picture
messages automatically download and display as they are
Messages
70
received. With Auto Receive Off, you are prompted to download
Picture messages.
• Signature — Create a signature, which can be included at the
bottom of outgoing Picture message text.
2. Use the Up/Down navigation keys to highlight the desired
setting. Press the
sub-menu.
key to enter the highlighted option’s
71
Section 9: MetroWEB
This section outlines how to launch MetroWEB, how to navigate
to other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
2. Use the navigation keys to browse the categories.
3. Once the desired category is highlighted, press
to
enter the category list.
Exit MetroWEB
MetroWEB
ᮣ
To exit MetroWEB, press
.
With MetroWEB, you can conveniently surf the web and
download ringtones and wallpapers using your phone. Each time
you launch MetroWEB, your phone connects to the Internet and
Using MetroWEB
When you use MetroWEB, some of the keys operate differently
than during a normal phone call. MetroWEB presents on-screen
items in any of the following ways:
the service indicator icon (
) appears in the display.
Stored Web Content
MetroWEB ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
•
•
•
•
Text or numeric input.
Links (embedded in content).
Numbered options (some may not be numbered).
Simple text.
You can act upon options or links by using the soft keys.
MetroWEB soft keys
Launching MetroWEB
1. In standby mode, select MENU
At the bottom of the MetroWEB display is a bar that contains
browser commands. The Left and Right soft keys (
and
)
➔
MetroWEB
➔
Get In Web.
are used to execute the browser commands that appear in their
respective corners of the display.
A list of categories (each representing one or more web
sites) appears in the display.
MetroWEB
72
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
•
•
•
End Key — Press to exit the MetroWEB and return the
phone to standby mode.
Left Soft Key — Press to activate the command that
appears above it in the display.
key (
) to select a link when it is highlighted.
How MetroWEB Keys Work
The following table lists MetroWEB keys and their functions.
Right Soft Key — Press to activate the command that
appears above it in the display.
•
•
Navigation key — Use to browse lists and options
Back Key — A browse, back-up key. Press once to
back up one page. Press and hold to go back to home
page. Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the text
display.
•
•
SHIFT Key — Press before entering text to enable
uppercase characters.
Space Key — Press to insert a space when entering
text.
• Number 1 thru 0 — Use the number keys to select
items in a menu if they are numbered.
73
Section 10: Voice SVC
This section explains how you can use and customize your
phone’s VoiceSignal voice recognition feature.
•
In standby mode, select MENU
Commands
➔
Voice SVC
➔
Voice
.
Voice SVC Options
Note: You can also set your phone to start VoiceSignal when you open the flip
Your My Shot includes VoiceSignal, state-of-the-art voice
recognition software that lets you use your voice to dial numbers,
access your Contacts list, and open Tools. To access your
phone’s voice recognition, do the following:
“Say a Command” appears in the display and is
pronounced through the earpiece, followed by a list of
available commands:
1. In standby mode, press the MENU soft key, then select
Voice SVC. The following options appear in the display:
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if
you have hundreds of them stored on your phone. You can also dial
any telephone number, even if it is not stored in your contact list, by
saying the digits in the number. (For more information, refer to
• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences. (For more information,
• Send Text — Lets you access Create Text Message.
2. Highlight the desired sub-menu, then press
.
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the
Contact’s information.
Voice Commands
1. To access the Voice Commands menu, do one of the
following:
•
In standby mode, press and hold the
key.
Voice SVC
74
• Go to — Lets you access the following list of your phone’s features
and functions:
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
–
–
–
–
–
–
–
–
–
Contacts
Calls
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
Choice Lists
Messages
MetroWeb
@metro
VoiceSVC
Multimedia
Tools
When VoiceSignal cannot recognize a name or number, it
displays a choice list of up to three possible choices, and
prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists with name
dialing, digit dialing, and contacts.
Settings
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status Signal Network Battery, or My
phone #
To change the way VoiceSignal uses choice lists:
,
,
,
1. In standby mode, press the MENU soft key, then select
.
Voice SVC
➔
Voice Settings
➔
Choice Lists.
2. Speaking clearly, say the command that you want to use.
2. Highlight the Choice List behavior you prefer:
If VoiceSignal does not recognize a command, it prompts
you to repeat the command.
• Automatic — VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
• AlwaysOn — VoiceSignal always displays a choice list, even when
there is only one choice.
• Always Off — VoiceSignal never displays a choice list.
3. Press OK or
to accept the new setting. Press
to
discard the new setting and return to the Voice Settings
menu.
75
Tips for Adapting Digit Dialing:
Sensitivity
•
•
•
•
Use Adapt Digits in a quiet place.
1. In standby mode, press the MENU soft key, then select
Voice SVC Voice Settings Sensitivity
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
➔
➔
.
2. Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between Reject
More spoken commands or names and Reject Less spoken
commands or names.
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
3. Press OK or
to accept the new setting. Press
to
discard the new setting and return to the Voice Settings
menu.
Adapt Digits
Digit Dialing
To adapt digit dialing, do the following:
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
1. In standby mode, press the MENU soft key, then select
Voice SVC
➔
Voice Settings
➔
Digit Dialing
➔
Adapt Digits
.
Your phone displays text describing the Adapt Digits
process.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
2. Press the
key. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Voice SVC
76
3. Wait for the beep and say the digits using your normal tone
The phone prompts you to confirm digit reset.
2. Press OK or to reset your digit adaptation, or press
Back or to cancel.
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?
”
•
•
If the recording was good, say “Yes.”
Sound
If you need to re-record, say “No.”
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
1. In standby mode, press the MENU soft key, then select
Repeat this step until you’re satisfied with the recording.
Voice SVC
➔
Voice Settings
➔
Sound. The following options
4. After confirming that the recording sounds “ok”, continue
appear in the display:
the recording process with the next set of digits.
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
• Names — On/Off — Enables or disables name playback.
5. After 10 sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
• Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone’s audio name
playback.
6. Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, “Adaptation complete
”
plays through the speaker and you are returned to the Digit
2. Select the desired option, then highlight the desired
Dialing menu.
setting.
Reset Digits
3. Press OK or
to accept the new setting. Press
to
discard the new setting and return to the Voice Settings
To reset digit dialing to factory default settings, do the following:
menu.
1. In standby mode, press the MENU soft key, then select
Voice SVC
➔
Voice Settings
➔
Digit Dialing
➔
Reset Digits.
77
Voice Launch
ᮣ
In standby mode, press the MENU soft key, then select
Voice SVC Voice Settings About
➔
➔
.
To set the key or action that launches VoiceSignal, do the
following:
The About Nuance screen appears in the display showing
the version level of the VoiceSignal software currently
installed on your phone.
1. In standby mode, press the MENU soft key, then select
Voice SVC
➔
Voice Settings
➔
Voice Launch. The following
options appear in the display:
• Key Only — Press and hold
call.
to activate VoiceSignal for one
• Key/EarMic — Attach a headset to your phone. Press and hold
or press and hold the button on the headset to activate
VoiceSignal.
• Key/Flip — Open the flip or press and hold
VoiceSignal.
to activate
2. Highlight the option you want.
3. Press OK or
to accept the new setting. Press
to
discard the new setting and return to the Voice Settings
menu.
About
This option causes the About VoiceSignal screen to appear in the
display, showing version and build information about the
VoiceSignal software included on your phone.
Voice SVC
78
Section 11: Multimedia
Use your My Shot phone to take full color digital pictures,
display them on your phone’s vivid color display, and instantly
share them with family and friends.
The message “Please, Wait...” followed by a camera
viewfinder screen appears in the display. (See “Camera
With Mobile Shop, you can download personalized ringtones,
pictures, and more. For more information, contact your
Wireless Carrier.
Note: You can also activate the camera (from standby mode) by selecting
MENU
➔
Multimedia
➔
Camera.
Camera
2. Point the camera lens at your subject.
Taking Pictures
3. Using the display as a viewfinder, press Take
(
) when
Taking pictures with the built-in camera is as simple as choosing
a subject, pointing the lens [located on the outside of the folder
(above the external display)], and pressing a button.
the image that you wish to capture appears in the display.
4. Press the Save soft key to save the picture to the Image
gallery in your phone, a part of the phone’s memory
devoted to storing, browsing, and viewing saved pictures.
Simple Snap Shot — Flip Open
To take a single picture using the
current camera settings, do the
following:
Press Send
(
) to save the picture and include it in a
1. In standby mode, press and
hold the Camera key
Press the Erase soft key to erase the photo.
(
) on the right side
Tip: You can change a number of the camera’s settings to suit particular uses
information.
of the phone.
79
Camera Screen
Resolution — Indicates the current Resolution setting
(320x240 shown).
When you activate your phone’s
camera, the second line of the
display is reserved for the current
camera resolution setting and the
picture counter. The center of the
display shows a viewfinder image
of the subject at which the camera
is pointed. The soft key labels on
the bottom line of the display
change to the following:
Night Shot — Indicates whether your phone is ready to
take photos in low light: Off (shown) or On
(
).
Self Timer — Delays the camera shutter by either
3
(
),
5
(
), or 10
(
) seconds after you press
) indicates how many
. A countdown timer (
seconds remain until the next picture is take.
White Balance — Indicates the current photo White
Balance setting (Auto shown). Other options are:
Sunny
•
Gallery — Pressing the Gallery soft
key opens the images gallery so you can view or manage your stored
pictures.
Cloudy
Tungsten
Flourescent
•
•
TAKE — Pressing
takes a picture of the image currently
appearing on the display.
Options — Pressing the Options soft key opens a pop-up menu of
camera settings.
Brightness — The direction arrows indicate that the
Left and Right navigation keys adjust the Brightness
setting. A horizontal progress bar indicates the current
photo Brightness setting.
Camera Screen Icons
Shooting Mode — Takes a Single picture (shown), one of
a Series of separate pictures ( ), one of a Mosaic
) of multiple pictures, or a single picture in a Fun
Zoom — The direction arrows indicate that the Up and
Down navigation keys adjust the Zoom setting. A
vertical progress bar indicates the current Zoom setting.
(
Frame (
) each time you press
.
Multimedia
80
Memory Counter — Indicates the number of
photos stored in the My Images folder and the
maximum number of photos you can save at the
current Resolution and Quality settings.
1. In camera mode, press the Up and Down navigation keys
to zoom in and out on your subject.
2. Press Take
(
) to take the picture.
Camera Options
Camera Shortcuts
The Camera Options let you temporarily override your default
camera settings. Any settings you change using the Camera
Options only apply to the current camera session or until you
make another change using the Camera Options.
You can use the Navigation Keys to quickly access both the
Brightness and Zoom capabilities of the built in camera. When
you exit the camera mode, all camera settings return to default
values.
Shooting Mode
Brightness
Shooting Mode lets you take a single picture, multiple pictures in
succession, or a single picture in a Fun Frame at the touch of the
Take key ( ).
1. In camera mode, change the brightness of your pictures
using the Left and Right navigation keys.
2. Press Take
(
) to take the picture.
Single Shot Mode
Zoom in on a Subject
1. In camera mode, press the Options soft key, then select
With Resolution set to 320x240 and below, Your camera has 9
digital zoom settings.
/
/
➔
Single Shot. The
icon appears in
the display.
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal
2. Press Take
(
) for each picture, which then appears in
result of digital enhancement.
the display.
3. To save the picture, press the Save soft key.
Note: The Zoom setting is affected by the Resolution setting (camera mode).
With Resolution set to 640x480, no zoom is available. With Resolution
set to 320x240 and lower, 9 Zoom settings are available.
81
Series Shot Mode
Fun Frame Mode
1. In camera mode, press the Options soft key, then highlight
Fun Frame lets you temporarily apply one of the preloaded
picture frames in your phone to characterize or enhance one or
more pictures.
/
/
➔
Series Shot. The
icon and the
Series shot counter (
display.
) appear in the
1. In camera mode, press the Options soft key, then highlight
/
/
➔
Fun Frame. The
icon appears in
2. Press Take
(
) for each of 5 pictures in the series. The
the display.
Series shot counter indicates the number of pictures taken
in the series.
2. Select the fun frame of your choice. You’re returned to the
camera viewfinder screen.
3. To save the picture, press the Save soft key.
3. Press Take
(
) for each picture, which then appears in
Mosaic Shot Mode
the display.
1. In camera mode, press the Options soft key, then highlight
4. To save the picture, press the Save soft key.
/
/
➔
Mosaic Shot. The
Mosaic shot counter ( ) appear in the display.
2. Press Take ) for each of 4 pictures for the Mosaic
icon and the
Note: Choose Normal to disable Fun Frames.
(
Resolution
picture. The completed Mosaic picture appears in the
display.
1. In camera mode, press the Options soft key, then highlight
/
/
/
. The following options appear in
3. To save the picture, press the Save soft key.
the display:
•
•
•
640x480 (pixels)
320x240 (pixels)
160x120 (pixels)
Multimedia
82
•
Picture ID — Lets you take pictures the correct size and resolution
for Contacts list picture IDs.
•
•
•
•
Off
3 Seconds
5 Seconds
10 Seconds
2. Select the desired resolution setting. The camera applies
the selected Resolution setting to your next picture.
Night Shot
2. Select the desired Self Timer delay. You are returned to the
camera screen and, if you select a value other than Off, a
Night Shot lets you take pictures in low light.
countdown timer (such as,
display.
) appears in the
Note: To avoid blurred pictures when taking Night Shots, hold your phone
very steady for two seconds after pressing Take
(
).
The next time you press Take
(
), the countdown timer
1. In camera mode, press the Options soft key, then highlight
. The following options appear in the display:
indicates the time remaining before the camera takes the
picture.
/
• Off
• On
White Balance
White Balance allows you to adjust picture quality according to
available light.
2. Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.
1. In camera mode, press the Options soft key, then highlight
Delay Pictures with the Self Timer
/
/
/
/
. The following options
Self Timer lets you delay a picture long enough so you or the
person taking the picture can join others in the picture.
appear in the display:
•
Auto — The camera automatically adjusts picture quality to
1. In camera mode, press the Options soft key, then highlight
available light.
/
/
/
. The following options appear in
•
Sunny — Use this setting when taking pictures in full sun.
the display:
83
Settings
•
•
•
Cloudy — Use this setting when taking pictures in cloudy
conditions.
Camera Settings (unlike other Camera Options) do not return to
their respective default values when you end the current Camera
session. Instead, Camera Settings apply to future Camera
sessions until you change individual Settings values or until you
use Reset Settings. To access the Camera Settings, do the
following:
Tungsten — Use this setting when taking pictures under
incandescent lights.
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
2. Select the desired White Balance. The camera applies the
selected White Balance setting to your next picture.
1. In camera mode, press the Options soft key, then highlight
Color Effect
Settings
2. Press OK
display.
Quality
.
Color Effect lets you change your pictures from full-color to two-
color, (black plus a color you select).
(
). The Camera Settings screen appears in the
1. In camera mode, press the Options soft key, then highlight
. The following options appear in the display:
1. In the Camera Settings screen, select Quality. The
•
•
•
•
•
•
Normal (full-color)
following options are available:
Black&White (monochrome)
•
•
•
High
Sepia
Normal
Economy
Negative
Green
Aqua
2. Select the desired picture quality setting. The camera
applies the selected Quality setting to your next picture.
2. Select the desired Color Effect. The camera applies the
selected Color Effect setting to your next picture.
Multimedia
84
View Mode
Auto Save
1. In the Camera Settings screen, select View Mode. The
following options appear in the display:
1. In the Camera Settings screen, select Auto Save. The
following options appear in the display:
• Landscape — Shows a wider, more panoramic view of the
• Off — You are prompted to save a new photo when you press
.
subject.
• On — Your phone automatically saves a new photo when you
• Portrait — Shows a narrower, more vertically oriented view of the
subject.
press
.
2. Select the Auto Save setting of your choice. You’re
2. Select the view mode setting of your choice. You’re
returned to the camera viewfinder screen.
returned to the camera viewfinder screen.
Reset Settings
Shutter Sound
1. In the Camera Settings screen, press the Reset soft key.
The following options appear in the display:
Choose from three different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sound acts as an
audible reminder that your camera has taken the picture.
•
•
No — Keeps the current camera settings.
Yes — Resets the camera settings to default values.
1. In the Camera Settings screen, select Shutter Sound. The
2. Select the desired option.
following options appear in the display:
Using My Images Gallery
•
Off — No Shutter Sound plays when you press TAKE
(
).
My Images lets you manage your photos and pictures you
download, and lets you choose the pictures that appear in your
phone’s display when you turn it on or off, while in standby mode
(wallpaper), and as image IDs for your contacts.
• Shutter 1
• OK
–
3
• Melody
2. Select the desired Shutter Sound (each sound plays as it is
1. In standby mode, press the MENU soft key, then select
highlighted) setting. The camera plays the selected Shutter
Multimedia
➔
My Images.
Sound the next time you press TAKE
(
).
85
A multiple-page matrix of thumbnail views of saved photos
and images appears in the display.
5. Press
to return to the previous menu, or press
to
return to standby mode.
2. Highlight an image or photo.
Using My Ringtones Gallery
My Ringtones lets you assign ringtones for calls, alarms, and
other alerts.
3. Press the Camera soft key to take new photos.
Press View
(
) to expand the highlighted image to fill the
1. In standby mode, press the MENU soft key, then select
screen.
Multimedia
➔
My Ringtones. A list of ringtones appears in
Press the Options soft key. The following options appear in
the display.
the display:
2. Use the navigation keys to highlight a ringtone.
3. Press the Set As soft key to assign the highlighted ringtone
• Send — Send to someone as part of a Picture message. (See
more information.)
to be used as a Ringtone, Contact ID, or as an Alert Tone
.
• Set As — Lets you set the highlighted image as the Main
Press Play ) to hear the ringtone.
(
Wallpaper
,
Front Wallpaper, or as a Picture ID for one of your
Contacts.
Press the Info soft key to show title and file type for the
• Erase Images — Erase one or more marked images.
highlighted ringtone.
• Rename — Change the file name for the highlighted image.
4. Press
to return to the previous menu, or press
to
• Lock Unlock — Block/permit erasure of the highlighted image.
/
return to standby mode.
• Slide Show — Lets you view all images in an automatically
changed slide show.
• Image Info — Shows the image file’s name, date and time,
resolution, and size.
4. Select the desired option.
Multimedia
86
–
–
information.)
Using My Sounds Gallery
My Sounds lets you record and manage voice memo files and
assign melodies as ringers or alerts.
Set As — Assign the highlighted ringtone to be used as a Ringtone
Contact ID, or as the Alert Tone
Rename — Change the name of the voice memo file.
Lock Unlock — Block/permit erasure of the highlighted image.
,
1. In standby mode, press the MENU soft key, then select
.
–
–
–
–
Multimedia
➔
My Sounds.
/
The following options appear in the display:
Erase all — Erase all unlocked voice memos.
• Record New — Lets you record voice memos.
Sound Info — Shows the title, size, type, and date for the file.
•
A list of recorded voice memo files and melodies.
5. When you highlight a melody file, you have the following
2. Use the navigation keys to highlight a file.
options:
3. When you select Record New, the Record New screen
•
•
Press Play
(
) to hear the ringtone.
appears in the display.
Press the Options soft key to show the following options:
•
•
•
Press Rec
Press the Pause soft key to pause/resume recording.
Press SAVE ) to stop recording and save the voice memo.
(
) to start recording a voice memo.
–
–
information.)
(
Set As — Assign the highlighted ringtone to be used as a Ringtone
,
4. When you highlight a saved voice memo file, you have the
Contact ID, or as the Alert Tone
.
following options:
–
–
Erase all — Erase all unlocked melodies.
Sound Info — Shows the title, size, and type for the file.
•
Press the Erase soft key to erase the selected voice memo file, if it
is unlocked.
6. Press
to return to the previous menu, or press
to
•
•
Press Play
(
) to listen to the voice memo.
return to standby mode.
Press the Options soft key, and the following options appear in the
display:
87
Section 12: Tools
This section explains how you can use your phone’s Digital
Assistant functions to view today’s calendar, schedule
appointments, set an alarm, perform simple math calculations,
and more.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
Accessing Your Phone’s Tools
To launch the Tools menu:
ᮣ
In standby mode, press MENU
➔
Tools. The Tools menu
To turn Bluetooth support on:
appears in the display.
ᮣ
From the Tools menu, select Bluetooth ➔ Bluetooth
Settings Enable
Bluetooth set to on” and the black Bluetooth On icon (
appears in the display.
To turn Bluetooth support off:
From the Tools menu, select Bluetooth ➔ Bluetooth
Settings Disable
Bluetooth set to off” appears in the display and the and
the black Bluetooth On icon ( ) disappears.
Bluetooth
➔
.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
“
)
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
ᮣ
➔
.
“
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Tools
88
Registered List
3. Press
display.
. Names of the available devices appears in the
This menu provides a list of
Bluetooth wireless technology
devices discovered by your handset.
4. Use the Navigation keys to highlight the device you want to
pair with your phone.
1. From the Tools menu, select
Bluetooth ➔ Registered List.
A list of registered Bluetooth
devices appears in the display.
5. Press the Pair key ( ) to pair the selected device with
the phone. You are prompted to enter the passkey or PIN
for the selected device.
Note: If you are connecting with another phone, the same passkey must be
Add New Device
entered into both phones.
To search for available Bluetooth devices:
6. Enter the device passkey or PIN and press
. Pop-up
1. From the Registered List select Add New Device.
messages appear to inform you that pairing with the
device is complete, and to prompt you to connect with the
selected device.
If Bluetooth is off, you are prompted to “Turn Bluetooth
on?”. Press the Yes soft key to turn Bluetooth on.
Note: Press the No soft key to leave Bluetooth off and return to the Bluetooth
7. To connect with the device, press the Yes soft key. The
Before connecting menu pops up showing the following
options:
sub menu.
“
Place device you are connecting to in discoverable mode
”
appears in the display.
• AlwaysAsk — Prompts you to confirm acceptance of connections
with this device.
2. Place the Bluetooth device in discoverable mode. (See the
• Always Connect — Your phone connects with this device without
prompting you.
device user manual for more information.)
89
8. Select the desired option. A pop-up message appears to
inform you that your phone is connected with the selected
device.
•
Rename Device — Lets you change or replace the device name,
as needed.
• Incoming Security — Lets you select whether to Always Ask for
verification of a connection with the selected device or to Always
Connect to the selected device without verification prompting.
Connecting to a Bluetooth Device
•
Device Info — Shows the type of device, status, address, the date
when it was paired with your phone, and the date the device was
last connected with your phone.
From the Registered List,
1. Highlight the device and press
. The blue Bluetooth
Connected icon ( ) appears in the display.
• Send Name Card — Lets you send Contacts entry information to
another Bluetooth device.
2. If you are unable to connect with the device a pop-up
2. Highlight the desired option and press the
key to
appears in the display. Press the Yes soft key to retry.
access that option.
Disconnecting from a Bluetooth Device
Bluetooth Settings
Enable/Disable
From the Registered List,
ᮣ
Highlight the device and press the Off soft key.
Selecting this option turns Bluetooth on or off. (For more
Tip: You can also disconnect from another Bluetooth device by turning the
device off.
Discovery Mode
Managing Your Registered List
Allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
From the Registered List,
Device Name
1. Highlight a device and press the Options soft key. The
following options appear in the display:
Shows the handset name. You may change this name. Enter the
text and press the
key.
•
Remove Device — Deletes the device from the Registered List.
Tools
90
Supported Profiles
• Left/Right navigation keys — Move the highlighting back/ahead
one day per keypress.
Lists the Bluetooth profiles your phone supports. Selecting a
profile shows a description of that profile.
• Up/Down navigation keys — Move the highlighting back/ahead
one week per keypress.
Device Info
• Up/Down volume keys — Moves the date and screen back/
ahead one month per keypress.
Shows the Bluetooth Type, Status, and Address of your phone.
Add a New Event
Calendar
1. From the Tools menu, select Calendar
.
Calendar allows you to view the
current, past, or future month in
calendar format. While viewing the
calendar, the current date is
highlighted, and days with scheduled
events are surrounded by a box.
The calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
Navigating the Calendar
1. From the Tools menu, select
3. Press Add. The New Event screen appears in the display
Calendar
.
with the Appointment Name option highlighted.
The calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
5. Use the Up/Down navigation keys to highlight the following
2. Use the following controls to highlight a date in the
New Event options:
Calendar screen:
• Start Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
91
• Start Time — Populated with the current time (rounded to the
View/Change an Event
1. From the Tools menu, select Calendar
nearest half-hour). To change the time, use the keypad.
.
–
Use the Left/Right navigation keys to select AM or PM.
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
• End Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
• End Time — Populated with a time one half-hour later that Start
Time. To change the time, use the keypad.
–
Use the Left/Right navigation keys to select AM or PM.
• Alert — Select Tone
navigation keys.
/
Vibrate Light Only using the Left/Right
/
3. To open the highlighted date and show a list of Events,
–
To select a particular Tone, use the Up/Down navigation keys to highlight
press VIEW
.
the current Tone and press the Left/Right navigation key. The Alert
4. Highlight an Event to view, then press VIEW to display the
specifics of the highlighted Event.
• Reminder — Select Once
/
Every 2 Minutes
/
Every 15 Minutes
/
5. To scroll the Event contents, use the Up/Down navigation
Off using the Left/Right navigation keys.
keys.
• Alert Time — Select 15 Min. Before
Before 3 Hours Before 5 Hours Before
Time 5 Min. Before 10 Min. Before using the Left/Right
navigation keys.
/
30 Min. Before
/
1 Hour
/
/
/
1 Day Before
/
On
/
/
7. To return to the Events list, press
.
6. To store this Event in your Calendar, press SAVE. An alarm
will notify you prior to the Event, if Reminder is set to a
8. For other options, press Options. The following options
value other than Off
.
appear in the display:
• Monthly — Repeat this event monthly.
• Erase — Remove this event from the Calendar.
Tools
92
• Erase all — Erase all events from the Calendar.
5. To discard this Memo and return to the Memo Pad screen,
press Cancel
9. Highlight an option. Press
to invoke the highlighted
.
option.
Review, Edit, and Erase Memos
Memo Pad
1. From the Tools menu, select Memo Pad. A list of any stored
Memos appears in the display.
Create notes and store them in
Memo Pad. Notes that you create in
Memo Pad can’t be prioritized or
assigned an alert. Return to Memo
Pad anytime to review and edit your
notes.
2. To review a Memo:
•
Highlight a Memo and press VIEW. The numbered Memo view
screen appears in the display.
•
Use the Up/Down navigation keys to scroll the Memo text.
3. To edit a Memo:
Create a Memo
•
From the Memo Pad screen, highlight the Memo and press
Options. The following options appear in the display:
1. From the Tools menu, select
Memo Pad. A list of any stored Memos appears in the
display.
–
–
–
–
Edit — Change the currently highlighted Memo.
Erase — Erase the highlighted Memo.
2. To add a Memo, press Add. A numbered Memo screen
Erase all — Erase all of the unlocked memos.
Lock Unlock — Prevent/allow erasure of the highlighted Memo.
/
appears in the display.
Select Edit. The numbered Memo edit screen appears in the display.
From the Memo view screen, press Edit. The numbered Memo
edit screen appears in the display.
•
•
•
Use the keypad to change the Memo text. (For more
4. When you’re finished entering details for the Memo, press
. The Memo is saved.
When you’re finished changing the Memo, press
changed Memo is saved.
. The
93
4. To erase a Memo:
Set an Alarm
1. From the Tools menu, select
Alarm Clock. The following
options appear in the display:
•
From the Memo Pad screen, highlight the Memo and press
Options. The following options appear in the display:
–
–
–
–
Edit — Change the currently highlighted memo.
Erase — Erase the highlighted memo.
• Alarm 1
Erase all — Erase all of the unlocked memos.
• Alarm 2
Lock Unlock — Prevent/allow erasure of the highlighted memo.
/
• Alarm 3
Select Erase. You are prompted to confirm the erasure.
From the Memo view screen, press Options. The following options
appear in the display:
2. Highlight the alarm clock that
you wish to set, then press
•
•
–
–
–
Erase — Erase the Memo you are viewing.
. The selected Set Alarm screen appears in the display
Add New Memo — Add a new Memo to Memo Pad.
with the Alarm option highlighted and with the current time
Lock Unlock — Prevent/allow erasure of the Memo you are viewing.
/
showing above it.
Select Erase. You are prompted to confirm the erasure.
To erase the Memo, press Yes. To keep the Memo, press No
3. Use the Up/Down navigation keys to highlight the following
.
Set Alarm options:
Alarm Clock
• Alarm — Use the Left/Right navigation keys to select On or Off
.
Your phone has three alarm clocks that you can set to go off
once, or to recur daily at a specific time. Once set, an alarm clock
is easy to change or turn off completely.
• Time — Populated with the current time. To change the time, use
the keypad.
–
Use the Left/Right navigation keys to select AM or PM
.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the
time for an alarm that was set for Once has elapsed while the phone is
off, the alarm occurs at the specified time on the next day.
• Frequency — Use the Left/Right navigation keys to select Daily
Mon.–Fri.
/
/
Weekends
/
/
Once
.
• Ringer — Select Tone
navigation keys.
Vibrate
/
Light Only using the Left/Right
Tools
94
–
To select a particular Tone, use the Up/Down navigation keys to highlight
the current Tone and press the Left/Right navigation key. The Alert
2. Highlight the Alarm you wish to turn off, then press
Options. The following options appear in the display:
• Off On — Disables/enables the highlighted Alarm and retains the
/
current settings.
4. When you’re finished entering the time and frequency for
• Reset Alarm — Disables the highlighted Alarm and resets the
the alarm, press SAVE. If the Alarm is set to On, the alarm
Alarm settings to default values.
icon (
) appears in the top of the display, unless
• Reset All — Disables all Alarms and resets all Alarm settings to
default values.
Bluetooth is enabled.
3. Highlight the desired option and press
. The selected
When an Alarm Sounds
Alarm(s) is (are) turned off.
An animated alarm clock appears in the display and an alert
sounds when the specified time for the alarm arrives.
World Time
World Time lets you view the time of
day or night in any of the 24 different
time zones around the world.
•
•
To silence the alarm, press
.
If the alarm was set as a Daily alarm, the alarm icon remains in the top
of the display.
•
If the alarm was set as a Once only alarm, the alarm icon disappears
from the top of the display.
Note: To use World Time, you need to
subscribe to your Wireless Provider’s
digital service.
Turn Off an Alarm
1. From the Tools menu, select Alarm Clock. The following
options appear in the display:
1. From the Tools menu, select
World Time. A world map
appears in the display.
• Alarm 1
• Alarm 2
• Alarm 3
95
2. Use the Left/Right navigation keys to browse cities and
3. For additional options, do one of the following:
their current times. The following cities are supported.
•
Set the current selected time zone as your Home Zone by pressing
the Options soft key and selecting Set as Home Zone
.
Los Angeles
Dallas
Denver
Phoenix
Miami
–
Keep the current Home Zone setting by pressing
to return to the
Chicago
Caracas
Buenos Aires
Cape Verde
Paris
Tools menu.
New York
Newfoundland
Mid Atlantic
London
La Paz
•
Display a particular time zone by pressing the Options soft key and
selecting Go to City then selecting a particular city from the
alphabetical list of city names.
Brasilia
Lisbon
Enable Daylight Saving Time (DST)
Rome
ᮣ
While viewing the World Time map, press the DST Off
On soft key to disable/enable Daylight Saving Time for
your Home Zone. The DST icon ( ) appears in the
display to indicate that Daylight Saving Time is enabled.
/
DST
Berlin
Athens
Istanbul
Moscow
Abu Dhabi
Mumbai
Kathmandu
Jakarta
Seoul
Helsinki
Nairobi
Jidda
Tehran
Kabul
Tashkent
Colombo
Bangkok
Beijing
Calculator
New Delhi
Alma-ata
Hong Kong
Tokyo
You can perform calculations,
including addition, subtraction,
multiplication and division using your
phone.
Adelaide
Okhotsk
Samoa
Guam
Sydney
Wellington
Midway
Alaska
1. From the Tools menu, select
Calculator. The Calculator
Auckland
Honolulu
San Francisco
Hawaii
screen appears in the display.
Tools
96
2. Enter the first number in your equation using the keypad.
(Numbers can be up to 15 digits long, and can include a
decimal point followed by up to 5 digits.)
Stop Watch
You can use this function to set a
stop watch.
1. From the Tools menu, select
Stop Watch. The Stop Watch
screen appears in the display.
•
•
Press
Press
to enter a decimal point.
to change the sign for a number to a negative.
3. Press Operator to add parentheses [( )] to your equation or
to enter a Power exponent (^), such as, 3^2, which is the
2. Press
to start, stop, and
2
equivalent of 3 .
resume the Stop Watch count.
4. Press the Clear soft key to clear current entries.
3. Press Record at the start of
each succeeding event/lap to
5. Use the Navigation keys (as shown in the Calculator
screen) to set the type of calculation that you wish to
perform. Your choices are as follows.
record the completion time for the previous event/lap. You
can record up to eight event/lap times.
•
•
•
•
[
[
[
[
+
x
] Addition
4. Press Reset to reset the Stop Watch and to erase all Stop
] Multiplication
Watch (lap) times recorded.
-
] Subtraction
] Division
Converter
The conversion menu provides the following conversion
categories:
÷
6. Use the keypad to enter the second number into your
equation.
•
•
•
•
Currency
Length
Weight
Volume
7. Press
to perform the calculation and view the result.
97
•
•
Area
5. Use the Navigation key to select the unit to be converted
Temperature
To. The converted quantity appears in the To field.
Using Converters
Currency — Reviewing/Editing Exchange Rates
To convert a currency, length, weight, volume, area, or
temperature, do the following:
The Currency Converter includes
long-term average exchange rates
as default values. To review and/or
change a default exchange rate to
the current exchange rate, do the
following:
1. From the Tools menu, select
Converter. The following list of
converters appears in the
display:
1. From the Tools menu, select
• Currency
Converter
➔
Currency.
• Length
2. Press the Rate soft key. The
• Weight
EXCHANGE RATE list appears in the display.
• Volume
3. Press EDIT
(
). The EDIT
• Area
EXCHANGE RATE list appears in
• Temperature
the display.
2. Select the conversion feature you wish to use.
4. Highlight a currency whose
exchange rate you wish to
change.
3. Use the Navigation key to select the unit to be converted
From
.
4. Enter the quantity you want converted in the From field.
Note: To include a decimal point, press
.
Tools
98
5. Use the keypad keys to change the selected exchange rate
4. Use the Left/Right navigation key to select the Base
value.
currency to be converted from.
6. Press
to save the changed exchange rate. The
5. Press the Down navigation key to highlight the Currency
EXCHANGE RATE list appears in the display.
field.
7. To change any other exchange rates, repeat Steps 3 – 6.
6. Enter an identifier of up to 5 characters for the new
currency using the keypad. (For more information, refer to
8. Press
to return to the Converter screen.
Currency — Adding Exchange Rates
7. Highlight the Exchange Rate field.
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
8. Enter a decimal exchange rate for the new currency using
the keypad.
Note: To include a decimal point, press
.
1. From the Tools menu, select
The Exchange Rate field only accepts up to five digits after the decimal
point.
Converter
➔
Currency.
2. Press the Rate soft key. The
Exchange Rate list for the From
currency appears in the
display.
9. To add the new exchange rate to the list, press SAVE
.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
3. Press the Add soft key. The
Add Exchange Rate screen
1. From the Tools menu, select Converter
➔
Currency.
appears in the display with the Base field highlighted.
99
2. Press Rate. The EXCHANGE RATE list for the From currency
1. From the Tools menu, select Tip Calculator. The Tip
Calculator screen appears in the display with the Bill field
highlighted.
appears in the display.
3. Highlight the user-added
currency exchange rate to be
erased.
2. Enter the total amount of the bill using the keypad.
Note: To include a decimal point, press the
key.
4. Press Erase. You are prompted
3. If needed, press the Down navigation key to highlight the
to confirm the erasure.
Tip field.
Note: The Erase soft key is undefined for
preloaded Exchange Rates. This
prevents you from erasing them.
4. Enter a tip percentage using the keypad.
5. If needed, press the Down navigation key to highlight the
#
5. To erase the selected exchange rate, press Yes. To keep
Paying field.
the selected exchange rate, press No
.
6. Enter the number of persons paying using the keypad.
Tip Calculator
7. The amount of the Tip, the bill Total, and the amount Each
Tip Calculator automatically
person should pay appear in the lower half of the screen.
calculates the following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
Calculations are based on the total
amount of the check, a selected
gratuity percentage, and the number
of people paying.
Tools
100
Section 13: Changing Your Settings
This section explains how to configure your phone’s language,
network preferences, security options, and other settings.
2. Highlight the desired option and press
function. The Settings menu appears in your display.
3. Press to return to standby mode.
Display Settings
Display settings let you change your phone’s menu appearance,
display brightness and contrast, and display content to better
meet your needs.
to select the
Accessing Your Phone’s Settings
To launch the Settings menu:
1. In standby mode, press the MENU soft key, then select
Settings
The Settings menu appears in the display.
Location Setting
.
1. From the Settings menu, select Display Settings. The
following menus appear in the display:
You can set your phone to pass Global Positioning System (GPS)
data to identify your location to the network continually or only
when you make an emergency (911) call.
• Menu Style — Lets you select whether the Main Menu appears as
an array of Icons or as a List of menu labels.
• Wallpaper — Choose the images that appear as background in
the Main display and Front display on your phone while in standby
mode.
Note: Check with your Wireless Carrier to determine if/when/where location-
based services are available.
• Clock Format — Choose whether the time and date appear in the
Main and Front displays on your phone in optional digital or analog
(clock face) style or in the default digital style.
1. From the Settings menu, select Location. The following
Location options appear in the display:
• Location On — Your location data is continually sent wherever the
feature is available.
• Theme — Choose the color set used to show menus and screens
on your phone’s display.
• 911 Only — Your location data is sent only when you dial 911.
• Dialing Font Size — Lets you select the size of the font used to
display digits you dial.
101
• Banner — Lets you change/replace the text greeting that appears
in the display when your phone is in standby mode. Also lets you
enable/disable an ERI (Extended Roaming Indicator) banner.
1. From the Settings menu, select Display Settings
➔
Wallpaper. The following options appear:
• Main Display
• Front Display
• Backlight — Set backlight options for the Main Display, Keypad,
and backlight Brightness.
2. Select the Display you wish to assign a new Wallpaper.
• Front Contrast — Lets you adjust the contrast for the Front
Display.
The following options appear:
• Shortcut Icon — Lets you display or hide a list of icons in the
standby screen that serve as shortcuts for launching applications
on your Tint™.
• My Images — Lets you select an image that you’ve downloaded
or a picture you’ve taken with the camera.
• Preset Images — Lets you select an image that came preloaded
2. Select the desired sub-menu. The following sections
with your phone.
describe the Display sub-menus in greater detail.
3. Select the image type that you wish to use. A list of images
Menu Style
appears in the display.
1. From the Settings menu, select Display Settings
➔
Menu
4. Select the image that you wish to use.
Style. The following options appear:
Clock Format
• Icon — Shows all main menus as an array of icons.
Lets you choose whether the time and date appear in the Main
and Front displays on your phone in optional digital or analog
(clock face) style or in the default digital style.
• List — Shows main menus in scrollable list (text) format.
2. Select the desired Menu Style.
Wallpaper
1. From the Settings menu, select Display Settings
➔
Clock
Format. The following clock options appear in the display:
Wallpaper lets you choose images that appear in the background
on your phone’s Main and Front displays while in standby mode.
• Main Clock
• Front Clock
Changing Your Settings
102
2. Select the desired clock. The following clock format
2. Use the Left and Right navigation keys to show the desired
options appear in the display:
color theme (which appears in the preview screen), then
press
to save the selected theme setting.
• Samsung — Main Clock only — Day, Month, and Date appear in
display just below the Status Icon line. Time appears in the middle
of the screen. Overwrites the current Wallpaper.
Dialing Font Size
Lets you select the font size used to display numbers you dial.
• Digital — Time, date, and day of the week are shown using an
alternate, large digital format.
1. From the Settings menu, select Display Settings
Font Size
➔
Dialing
• Analog — Time is shown using an analog clock face image.
.
• Off — Time, date, and day of the week are shown using the
default, small digital format.
The following Size options appear in the display:
• Normal
3. Select the preferred Clock Format.
• Large
Theme
2. Select the preferred Dialing Font Size.
Lets you select the colors used to show menus and screens in
the Main display.
Banner
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1. From the Settings menu, select Display Settings
➔
Theme.
The following options appear in the display:
1. From the Settings menu, select Display Settings
➔
Banner.
The following sub-menus appear in the display:
• Personal
• ERI Banner
2. Select the desired banner.
103
If you select Personal, the Banner screen appears in the
• Keypad — Sets the amount of time the keypad backlight remains
on after a period of inactivity. Optional settings are: 10 seconds
,
15
display with the Enter Text field highlighted.
seconds, 30 seconds Always On, and Always Off.
,
•
Enter a word or short phrase to appear in your phone’s display while
in standby mode (Up to 12 characters). (For more information, refer
• Brightness — Use the Left/Right navigation keys to select
between any of 5 optional settings.
2. Select the Backlight option you wish to change.
•
•
Press and hold
to erase an existing banner, if necessary.
3. Select the preferred setting for the selected Backlight
Press to save your changes.
option.
If you select ERI Banner, the following options appear in the
display:
Front Contrast
• On
Front Contrast lets you adjust the image contrast in the Front
Display to any of 51 settings between -50
1. From the Settings menu, select Display Settings
Contrast
2. Use the Left/Right navigation keys to select the contrast
level between -50 +50
,
0, and +50.
• Off
Select the preferred ERI Banner option.
➔
Front
.
Backlight
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
–
0
–
.
3. Press OK to save your new contrast setting.
Prolonged backlight use drains your battery faster.
Shortcut Icon
1. From the Settings menu, select Display Settings
➔
Shortcut Icon lets you display or hide a list of icons that serve as
shortcuts for launching applications on your Tint™.
Backlight. The following sub-menus appear in the display:
• Main Display — Sets the time the internal display backlight
remains on after a period of inactivity. Optional settings are: 10
seconds 15 seconds, 30 seconds, Always On, and Always Off.
,
Changing Your Settings
104
1. From the Settings menu, select Display Settings
➔
3. Use the Navigation key or the Volume key (on the left side
of your phone) to select the volume level (Ringer Off Low
Low/Medium Medium Medium/High, or High) or vibrate
mode (Vibrate Vibrate/High) for the selected option.
Shortcut Icon. The following options appear in the display:
,
,
,
,
• On — Shortcut Icons list appears in the display when your phone is
in standby mode.
,
• Off — Shortcut Icons list does not appear in the display.
4. Press SET to save the option setting.
2. Select the preferred Shortcut Icon option.
Ringer Type
Sound Settings
Sound Settings let you customize your phone’s audio properties,
such as ringers, keypad tones, alerts, start up melody, and more.
You can assign ring tones and melodies for calls, alarms, and
other alerts in the Ringer Type sub-menu.
1. From the Settings menu, select Sound Settings
Type
➔
Ringer
Volume
.
Use the Volume sub-menu to set the default volume for call
ringers, message alerts, and alarms.
The following ringer types appear in the display:
• Voice Calls
• Messages
1. From the Settings menu, select Sound Settings
➔
Volume.
The following options appear in the display:
–
–
–
Text Message
Picture Message
Voicemail
• Voice Calls — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming calls.
• Messages — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming messages.
• Roam Ringer
2. Select a ringer type. The following ringtone options
• Alarms — Lets you set your phone to be silent, play a sound, and/
or vibrate in response to a preset alarm time being reached.
appears in the display:
2. Select the desired option.
• My Ringtones
• My Sounds
105
3. Select the desired ringtone gallery.
2. Select an Alert. The following options appear in the
display:
4. Scroll through the list of ringtones and melodies.
• On
•
To play a ringtone or melody, press Play
.
• Off
5. When the desired ringtone or melody plays, press
to
3. Select the desired setting for the selected Alert.
save your selection.
Key Tone
Alerts
You can set the Tone Level (volume) for tones that play when you
press keys on your phone and the Tone Length for DTMF tones
generated when you press keypad keys.
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, and other
options.
1. From the Settings menu, select Sound Settings
➔
Key Tone.
1. From the Settings menu, select Sound Settings
➔
Alerts.
The following options appear in the display:
The following options appear in the display:
• Tone Level — Lets you set the volume at which tones play when
you press a key on your phone (Off Low Low/Medium Medium
Medium/High, or High).
• Minute Beep — Sound an alert ten seconds before each elapsed
,
,
,
,
minute of a call.
• Roam/SVC Alert — Sound an alert when you leave your home
service area.
• Tone Length — Lets you select time length (Normal or Long) for
the DTMF pulses your phone generates when you press keypad
keys.
• Call Connect — Sound an alert when you connect/disconnect a
call.
2. Highlight the desired sub-menu, then press
3. Select the desired setting.
Call Settings
.
• Power On/Off — Play power on and power off melodies.
• Voice Privacy Alert — Sound an alert when Voice Privacy is not
available.
The Call Settings sub-menu lets you set call options such as Auto
Retry, Data rates for data calls, and more.
Changing Your Settings
106
Call Answer
2. Select the desired setting.
You can select a specific answer mode when you receive an
incoming call.
Auto Retry
Auto Retry automatically re-dials a number if there is no answer
or the dialed party is busy. Depending upon your location, the
number of times your phone re-deals a number may vary.
1. From the Settings menu, select Call Settings
Answer
The following call answer options appear in the display:
➔
Call
.
1. From the Settings menu, select Call Settings
➔
Auto Retry.
The following options appear in the display:
• Any Key — Pressing any key except the Volume key or
answers a call.
key
• Off
• Send Only — Only pressing
answers a call.
• Every 10 Seconds
• Every 30 Seconds
• Every 60 Seconds
2. Select the desired setting.
• Flip Open — Opening the flip or pressing
answers a call.
2. Select the preferred option.
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
TTY Mode
Your phone is fully
Teletypewriter (TTY)/
Telecommunication Device for
the Deaf (TDD) compatible.
You connect TTY/TDD
1. From the Settings menu, select Call Settings
Answer
➔
Auto
.
The following options appear in the display:
• Off
equipment to the headset connector on the right side your phone.
• After 1 Second
• After 3 Seconds
• After 5 Seconds
Note: TTY Mode must be enabled (TTY Full selected) before you can use your
phone with TTY/TDD equipment.
107
1. From the Settings menu, select Call Settings
➔
TTY Mode
.
Voice Privacy
Voice Privacy lets you choose what level of voice security
(Standard or Enhanced) your phone will use.
A message pops-up warning of possible headset and non-
TTY accessory performance impairment when in TTY mode
and prompting you to confirm that you want to enable/
disable TTY Mode.
Tip: You can change your Voice Privacy setting during a call by using the In-
•
•
Press Yes to change the TTY Mode setting.
1. From the Settings menu, select Call Settings
➔
Voice
Press No to keep the current TTY Mode setting.
Privacy. The following options appear in the display:
If you press Yes, the following options appear in the
• Standard
display:
• Enhanced
• TTY Full — Enables TTY mode while letting you hear and speak
with the other party.
2. Select the Voice Privacy option of your choice.
• TTY + Talk — Enables TTY mode while letting you speak with the
other party.
Data Settings
Use the Data Settings sub-menu to set your phone to detect
data connections automatically.
• TTY + Hear — Enables TTY mode while letting you hear the other
party.
1. From the Settings menu, select Call Settings
Settings
The following options appear in the display:
• Data Off — Your phone ignores data connections.
➔
Data
• TTY Off — Disables TTY mode.
.
Note: The TTY Mode option has no effect on the phone’s earpiece,
microphone, or speaker. When you select TTY Full, all currently
enabled sound functions remain enabled.
• Data For Next Call — Your phone accepts data connection for the
next call.
2. Select the desired setting. You’re returned to the previous
menu and the TTY icon (
display.
) appears in the top of the
Changing Your Settings
108
• Data Until Powered Off — Your phone accepts data connections
•
•
Press Yes to change to the new setting.
until you turn off your phone.
Press No to discard the change and keep the original setting.
2. Select the desired data setting.
Note: If you press Yes, you are returned to standby mode, and the Airplane
Mode icon ( ) appears in the display. If you press No, the Airplane
Mode screen remains in the display.
Phone Settings
Airplane Mode
Language
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from making or receiving calls, but
allows you to use other features (such as the camera and the
Tools) safely in sensitive environments, such as on board an
aircraft.
The Language option changes the language of menus, sub-
menus, and other user-interface features.
1. From the Settings menu, select Phone Settings
Language
➔
.
1. From the Settings menu, select Phone Settings
Mode
The following options appear in the display:
➔
Airplane
The following options appear in the display:
.
• English
• Español
• On — Disables the radio transmitter and receiver and the Bluetooth
interface in your phone.
2. Select your language preference.
Security
Tip: If you need to make an emergency call with Airplane mode enabled, just
dial the emergency number and press
.
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
• Off — Enables the radio transmitter and receiver in your phone.
2. To return to the Phone Settings menu, press
.
To access the Security menu, do the following:
3. Select the desired option. You are prompted to confirm
1. From the Settings menu, select Phone Settings
➔
Security.
your setting change.
109
The “Enter Code” prompt appears in the display.
• Lock — The phone locks immediately and stays locked until you
enter the lock code.
2. Enter the four-digit lock code using the keypad.
• Unlock — The phone remains unlocked.
Note: The default lock code is the last four digits of your mobile phone
• On Power Up — The phone locks automatically the next time your
phone is powered on and stays locked until you enter the lock code.
number.
2. Select the preferred Lock Phone setting.
The “Enter Code” prompt disappears and the Security
Change Lock
menu appears in the display.
The default lock code is generally the last four digits of your
phone number. It is advisable to change the default lock code to a
secret code for security purposes.
Lock Phone
Locking the phone blocks all outgoing calls except those to 911
and to the three user-programmed emergency numbers. You can
lock the phone manually, or set the phone to lock automatically
when turned on. In Lock mode, you can answer calls, but you
must unlock the phone to place calls (except to emergency and
secret numbers).
1. From the Security menu, select Change Lock
.
The “New Lock Code” prompt appears in the display.
2. Enter the New Lock Code. You’re prompted to re-enter the
New Lock Code for verification.
Important!: If you do the following, you won’t be able to access your phone
and you will be required to call the Service Center to unlock your
phone:
3. Enter the New Lock Code again. Your changes are stored.
– Set Lock Phone to On Power Up
Tip: Your phone does not allow you to view the lock code for obvious security
reasons. If you change the lock code, be sure to write down or
memorize the new code.
– Change the NAM Selection setting without a number programed
into NAM2
.
1. From the Security menu, select Lock Phone. The following
options appear in the display:
Changing Your Settings
110
Emergency #
Store Emergency Numbers
1. From the Security menu, select Emergency #
.
You have the option of storing up to three emergency numbers to
your phone. Each number can be up to 32 digits in length. All
emergency numbers can be dialed any time, even when your
phone is locked or restricted.
2. Press
emergency numbers.
3. Enter the emergency number (up to 32 digits in length).
4. Press to save the number that you entered.
,
, or
to select one of the three
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked, restricted, or in
Airplane Mode. If you call 911, an audible tone plays and an
Emergency prompt appears in the display for the duration of the call.
5. Press Cancel to discard your entry and return to the
Emergency # menu.
Important!: Because of various transmission methods, network parameters,
and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number using the
keypad.
2. Press
to place the call.
Important!: DO NOT depend on this phone as a primary method of calling
Reset Phone
911 or for essential or emergency calls.
Reset Phone returns all setup parameters (except for the
Contacts entries) to their factory default values.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Caution!: Before selecting Reset Phone, contact your Wireless Carrier.
Invoking Reset Phone may erase settings made by your Wireless
Carrier from your phone, resulting in loss of service.
Note: When you dial an emergency number, you phone locks itself to the
emergency location that answered the call and locks itself in 911-Only
mode, blocking from dialing any number but an emergency number.
ᮣ
From the Security menu, select Reset Phone.
111
You are prompted to confirm that you want to restore
default settings (except for Contacts).
2. Highlight the desired Restriction and press
. The
following options appear in the display:
•
•
Press Yes to reset your phone to factory default settings.
• On — Restrict (block) selected calls.
Press No to keep the current settings.
• Off — No restriction on selected calls.
Erase All Entries
Note: Default setting for all Restrictions is Off
.
Erase All Entries deletes all entries from the Contacts list.
3. Highlight the desired setting, then press
.
ᮣ
From the Security menu, select Erase All Entries.
NAM Selection
You are prompted to confirm that you want to restore
default Contacts entries and erase all others.
NAM Selection allows you to set your preferred system. Contact
your Wireless Carrier for more information.
•
•
Press Yes to reset (delete) your Contacts list.
Press No to keep the current Contacts entries.
Important!: If you do the following, you won’t be able to access your phone
and you will be required to call the Service Center to unlock your
phone:
Restriction
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed by/to your Contacts.
– Set Lock Phone to On Power Up
– Change the NAM Selection setting without a number programed
into NAM2
.
1. From the Security menu, select Restriction
.
1. From the Settings menu, select Phone Settings
Selection
➔
NAM
The following options appear in the display:
.
• Outgoing — Restrict/allow outgoing calls.
The following NAM options appear in the display:
• Incoming — Restrict/allow incoming calls.
• Contacts — Restrict/allow calls not to or from Contacts.
• NAM 1 — Your service contract has one phone line.
• NAM 2 — Your service contract has two phone lines.
2. Select the desired NAM setting.
Changing Your Settings
112
Note: The phone automatically restarts itself.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date on your phone automatically.
System Select
1. From the Settings menu, select Phone Settings
➔
Set Time.
The System Select feature enables you to automatically or
manually select the network used when roaming outside of your
home area.
The following options appear in the display:
• Set Date
• Set Time
1. From the Settings menu, select Phone Settings
➔
System
2. Select the desired Set Time option. The associated screen
Set Date Set Time) appears in the display.
Select. The following roaming options appear in the
(
/
display:
Set Date
• MetroPCS Only — Roaming is off. If your home system is not
available then your calls will not be connected, and the No Service
1. In the Set Date screen, enter the current date using your
icon (
) appears in the display. In some service areas, an
keypad.
operator may come on-line and ask you how you would prefer to
pay for a call.
Note: The month and day values must be entered using two digits each (such
as, 10 or 30). The year value must be entered using all four digits
(such as, 2007).
• Automatic — Roaming is on. This option will always try to connect
your calls using a digital service in the Preferred Roaming List (PRL)
loaded into your phone. If a preferred service is not found, then this
option will attempt to acquire any digital service.
2. Press
to save the new date.
2. Select the preferred roaming option. The Phone Settings
Set Time
menu appears in the display.
1. In the Set Time screen, enter the current time using your
Set Time
keypad.
Use Set Time to set the current time and date.
113
2. Press the Up navigation key. A list of Contact names
Note: The hour and minute values must be entered using two digits each
(such as, 05 or 11). You must enter the hour value in 12-hour format
(that is, values 01 – 12).
appears in the display.
3. Highlight the searched for Contact.
2. To change am or pm, use the Left and Right navigation
•
•
To call the Contact, press
To view the Contact, press
.
keys.
.
Searching for a Menu Item
3. Press
to save the new time.
1. In standby mode, press the first few numeric keys that
Quick Search
correspond to the letters of the Menu option label.
Quick Search is an easy way to locate contacts in your Contacts
list and individual Menu options.
Example: To search for “Inbox” you would enter 462
.
1. From the Settings menu, select Phone Settings
➔
Quick
2. Press the Down navigation key. A list of matching menu
Search. The following options appear in the display:
options appears in the display.
• On
3. Select the desired menu option to access the associated
• Off
sub-menu or content.
2. Select the preferred Quck Search setting.
Shortcut Key
Searching for a Contact
1. In standby mode, press the first few numeric keys that
correspond to the letters of the Contact’s name.
The Navigation keys can be customized to launch any of several
applications or functions from standby mode. Use the Shortcut
Key sub-menu to choose the application that you wish each
Navigation key to launch.
Example: To search for “Sally” you would enter 725
.
1. From the Settings menu, select Phone Settings ➔ Shortcut
Key.
Changing Your Settings
114
The following Navigation key options appear in the display:
• Memo Pad
• Alarm Clock
• Up Key
• World Time
• Right Key
• Down Key
• Left Key
• Calculator
• Stop Watch
• Converter
Note: The Right Key and Left Key shortcuts can be changed only when the
• Voice Recording
• Tip Calculator
3. Select the desired function.
2. Select the desired Navigation key. The following options
You can now press the selected Navigation key in standby
mode to launch the selected function.
appear in the display:
• @metro
• MetroWEB
• Messages
• Inbox
Memory Info
Memory Info shows the amount of phone memory that is
available and used, and details the distribution of the used
memory.
• Contacts
1. From the Settings menu, select Memory Info. The following
• Recent Calls
• Voice Commands
• My Images
• My Ringtones
• My Sounds
• Calendar
memory usage items appear in the display:
• Total Used — Shows Total phone memory Used to store Images,
Ringtones, Sounds, and Applications.
• Available — Shows total phone memory Available to store Images,
Ringtones, Sounds, and Applications.
115
• My Photos — Shows total phone memory used to store Images in
• Support System wireless band(s) available.
2. Press to return to the Phone Info menu.
the My Images folder.
• My Ringtones — Shows total phone memory used to store
ringtones in the My Ringtones folder.
Icon Glossary
• My Sounds — Shows total phone memory used to store recorded
sounds in the My Sounds folder.
This option causes the Icon Glossary list to appear showing the
icons that can appear in the display and the names of the icons.
• Applications — Shows total phone memory used to store
1. From the Settings menu, select Phone Info
➔
Icon Glossary.
downloaded Applications.
A list of the icons that can appear on the top line of the
display appears in the display.
• Pic Msg — Shows total phone memory used to store Picture
messages.
2. Press
to return to the Phone Info menu.
2. Press
to return to the Settings menu.
Phone Info
Version
Phone Info lets you identify the hardware and software versions
of your phone and to identify the phone number assigned to your
phone.
You can view the hardware and software version information for
your phone. This feature is helpful if you need to contact
Customer Service.
1. From the Settings menu, select Phone Info
➔
Version. The
Phone Number
following information appears in the display:
The Phone Number option lets you review the ten-digit number
assigned to your phone by your Wireless Carrier and other
information useful when contacting Customer Service.
• S/W (Software) version
• PRL (Preferred Roaming List) identifier
• ERI (Extended Roaming Indicator)
• Browser version
1. From the Settings menu, select Phone Info
➔
Phone
Number. The Phone number screen appears in the display
listing the following information:
• @metro version
• Phone Number assigned by your Wireless Carrier.
• H/W (Hardware) version
Changing Your Settings
116
2. Press
to return to the Phone Info menu.
MEID
Lists the MEID (Mobile Equipment Identifier) number for your
phone in decimal (MEID Dec) and hexadecimal (MEID Hex)
formats.
1. From the Settings menu, select Phone Info ➔ MEID.
MEID Dec and MEID Hex numbers for your phone appear in
the display.
2. Press
to return to the Phone Info menu.
117
Section 14: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
118
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
•
•
Head: 1.17 W/Kg.
Body-worn: 1.16 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
119
Do wireless phones pose a health hazard?
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information
120
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
121
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
Health and Safety Information
122
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
123
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
Health and Safety Information
124
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
125
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Health and Safety Information
126
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
127
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
Internet: http://www.nidcd.nih.gov/
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
Health and Safety Information
128
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Internet: http://www.cdc.gov
1-888-232-6348 TTY
UsingYourPhoneNearOtherElectronicDevices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
Internet: http://www.cdc.gov/niosh/topics/noise/
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
•
129
•
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
For more information see:
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
Health and Safety Information
130
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
T3
+
T2
=
5
M3
+
M2
=
5
Vehicles
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
131
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
Health and Safety Information
132
phone warranty if said accessories cause damage or a defect to
the phone.
FCC Notice and Cautions
FCC Notice
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Other Important Safety Information
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Quincy, Massachusetts
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
133
Maintaining Your Phone's Peak Performance
Product Performance
Getting the Most Out of Your Signal Reception
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
Health and Safety Information
134
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
Battery Standby and Talk Time
•
•
If left unused, a fully charged battery will discharge itself over time.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Battery Precautions
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
135
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
0 °C (32 °F).
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
136
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
137
Section 15: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
138
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
139
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
140
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
141
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
Warranty Information
142
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
143
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
©
2009 Samsung Telecommunications America. All rights
reserved.
Warranty Information
144
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
145
Index
Volume(call ringers, message alerts,
Alerts 106
Apps
Buying 53
Disabled 53
Expired 53
Removing 5
Bluetooth
Settings 90
C
Calculator 96
Calendar 91
Call Settings
Symbols
@metro
Applications Shopping and
Downloading 52
Launching 52
Settings 52
Numerics
A
Adding Contacts
Adjust
Removing 53
Restoring 53
B
Backlight 104
Banner 103
Battery
Charging 6
Installing 5
146
Calls
Answering 23
Shortcuts 81
Rename 48
Converters 97
Block 24
Emergency 19
Ignore 25
Logs 25
Making 19
Pauses 19
Three-way 19
Waiting 24
Erase 27
ChatLINK™
Launching 50
Obtaining 50
Contacts
Counter
Data 28
D
Display
Adding 39
Banner 103
Deleting 49
Editing 40
Finding 37
Contacts Groups
Add 48
Display Settings
Backlight 104
E
Editing Contacts
Camera
Options 81
Screen 80
Erase 49
147
E-Mail 63
Emergency Calls 19
F
Finding Contacts
G
Message Settings
Text 70
Messages
Receive 55
M-Ratings 130
N
Navigation
Menu 29
P
Settings 69
Types 54
Phone
Features 9
Modes 16
Settings 109
View,Closed 9
Phone Info
MEID 117
Phone Settings
Metro411 50
MetroWEB
Launching 72
Using 72
Mode
Camera 18
Handsfree 17
Lock 18
Silent 17
Speakerphone 17
Standby 16
Vibrate 17
Gallery
Image 85
H
HAC 130
I
M
mail@metroSM 63
MEID 117
Language 109
148
|