Samsung SGH X120 User Manual

* Some of the contents of this manual may differ from your phone,  
depending on the software installed or your service provider.  
Printed in Korea  
Code No.:GH68-05757A  
English. 09/2004. Rev 1.0  
World Wide Web  
http://www.samsungmobile.com  
Contents  
Important safety precautions........................... 7  
Unpacking ........................................................ 9  
Your phone..................................................... 10  
Phone layout........................................................... 10  
Display................................................................... 13  
Service light............................................................ 16  
Getting started............................................... 17  
Installing the SIM card ............................................. 17  
Charging the battery................................................ 19  
Switching on or off the phone.................................... 21  
Locking or unlocking the keypad................................ 22  
Call functions ................................................. 23  
Making a call........................................................... 23  
Adjusting the volume ............................................... 25  
Answering a call ...................................................... 26  
Viewing missed calls ................................................ 27  
Quickly switching to Silent mode................................ 29  
Selecting functions and options...................... 30  
Using the soft keys .................................................. 30  
Selecting options ..................................................... 31  
Phonebook ..................................................... 33  
Storing a number with a name .................................. 33  
Using Phonebook entry options.................................. 36  
Dialling a number from Phonebook............................. 37  
Speed-dialling ......................................................... 38  
Searching for and dialling a number in Phonebook........ 40  
Editing a caller group ............................................... 42  
Deleting all of the Phonebook entries.......................... 43  
Checking the memory status..................................... 44  
Using the service dialling numbers ............................. 44  
Entering text .................................................. 46  
Changing the text input mode ................................... 47  
Using T9 mode........................................................ 48  
Using Alphabet mode ............................................... 50  
Using Number mode................................................. 51  
Using Symbol mode ................................................. 51  
3
Contents  
Options during a call ...................................... 52  
Putting a call on hold................................................ 52  
Using the menu functions ......................................... 53  
Switching off the microphone (Mute).......................... 54  
Muting or sending key tones...................................... 55  
Sending a sequence of DTMF tones ............................ 55  
Searching for a number in Phonebook ........................ 56  
Call waiting............................................................. 57  
Making a multi-party call .......................................... 57  
Using the menus ............................................ 60  
Accessing a menu function by scrolling ....................... 60  
Using shortcuts ....................................................... 61  
List of menu functions.............................................. 62  
Messages........................................................ 67  
Text messages (Menu 1.1)......................................... 67  
Multimedia messages (Menu 1.2)................................ 75  
Push messages (Menu 1.3) ........................................ 87  
Delete all (Menu 1.4)................................................. 87  
Voice mail (Menu 1.5) ............................................... 88  
Broadcast messages (Menu 1.6) ................................. 89  
Memory status (Menu 1.7) ......................................... 90  
Call records .................................................... 91  
Missed calls (Menu 2.1) ............................................. 91  
Received calls (Menu 2.2).......................................... 92  
Dialled calls (Menu 2.3)............................................. 92  
Delete all (Menu 2.4) ................................................ 93  
Call time (Menu 2.5) ................................................. 94  
Call costs (Menu 2.6) ................................................ 95  
Sound settings ............................................... 96  
Ring tone (Menu 3.1) ................................................ 96  
Ring volume (Menu 3.2) ............................................ 96  
Alert type (Menu 3.3)................................................ 97  
Keypad tone (Menu 3.4)............................................ 97  
Message tone (Menu 3.5) .......................................... 97  
Power on/off (Menu 3.6)............................................ 99  
Alert on call (Menu 3.7) ............................................. 99  
Extra tones (Menu 3.8)............................................ 100  
4
Contents  
Phone settings ............................................. 101  
Activate infrared (Menu 4.1) .................................... 101  
Display settings (Menu 4.2) ..................................... 102  
Greeting message (Menu 4.3) .................................. 104  
Own number (Menu 4.4).......................................... 104  
Language (Menu 4.5).............................................. 105  
Security (Menu 4.6)................................................ 105  
Extra settings (Menu 4.7) ........................................ 109  
Short cut (Menu 4.8)............................................... 110  
Reset settings (Menu 4.9)........................................ 110  
Organiser ..................................................... 111  
Alarm (Menu 5.1) ................................................... 111  
Calendar (Menu 5.2) ............................................... 113  
Time & Date (Menu 5.3) .......................................... 115  
Calculator (Menu 5.4).............................................. 116  
To do list (Menu 5.5)............................................... 117  
Voice memo (Menu 5.6) .......................................... 119  
Currency exchange (Menu 5.7)................................. 121  
Network services.......................................... 122  
Call diverting (Menu 6.1) ......................................... 122  
Call barring (Menu 6.2) ........................................... 124  
Call waiting (Menu 6.3) ........................................... 125  
Network selection (Menu 6.4)................................... 126  
Caller ID (Menu 6.5) ............................................... 127  
Closed user group (CUG) (Menu 6.6)......................... 127  
Funbox ......................................................... 129  
WAP browser (Menu 7.1) ......................................... 129  
Games (Menu 7.2)................................................... 135  
Sounds (Menu 7.3) ................................................. 138  
Images (Menu 7.4) ................................................. 138  
Delete all (Menu 7.5) .............................................. 139  
Memory status (Menu 7.6)....................................... 140  
SIM AT ......................................................... 141  
Solving problems.......................................... 142  
5
Contents  
Access codes ................................................ 145  
Phone password .................................................... 145  
PIN...................................................................... 146  
PUK ..................................................................... 146  
PIN2 .................................................................... 147  
PUK2 ................................................................... 147  
Barring password................................................... 148  
Health and safety information...................... 149  
SAR certification information ................................... 149  
Precautions when using batteries............................. 150  
Road safety .......................................................... 152  
Operating environment........................................... 152  
Electronic devices .................................................. 153  
Potentially explosive environments........................... 155  
Emergency calls .................................................... 156  
Other important safety information .......................... 157  
Care and maintenance............................................ 158  
Glossary ....................................................... 160  
Index ........................................................... 165  
Quick reference card .................................... 169  
6
Important safety  
precautions  
Read these guidelines before using your wireless  
phone. Failure to comply with them may be  
dangerous or illegal.  
Road safety at all times  
Do not use a hand-held phone while driving; park  
the vehicle first.  
Switching off when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Switching off in an aircraft  
Wireless phones can cause interference. Using them  
in an aircraft is both illegal and dangerous.  
Switching off in hospitals  
Switch off your phone near medical equipment.  
Follow any regulations or rules in force.  
Interference  
All wireless phones may be subject to interference,  
which could affect their performance.  
Special regulations  
Meet any special regulations in force in any area  
and always switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger (in a hospital for example).  
7
   
Important safety precautions  
Sensible use  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on.  
Emergency call  
Ensure the phone is switched on and in service. Key  
in the emergency number for your present location,  
then press the  
key. You must deactivate any  
unnecessary features in use before you can make  
an emergency call. Give all necessary information  
as accurately as possible. Do not end the call until  
given permission to do so.  
Water resistance  
Your phone is not water-resistant. Keep it dry.  
Accessories and batteries  
Use only Samsung-approved accessories and  
batteries. Use of any unauthorised accessories  
could damage your phone and may be dangerous.  
Qualified service  
Only qualified service personnel may repair your  
phone.  
For more detailed safety information, see “Health  
and safety information” on page 149.  
CAUTION  
RISK OF EXPLOSION IF A BATTERY IS REPLACED  
BY AN INCORRECT TYPE.  
DISPOSE OF USED BATTERIES ACCORDING TO  
THE INSTRUCTIONS.  
8
Unpacking  
Your package contains the following items:  
Travel Adapter  
User’s Manual  
Handset  
Battery  
Note: The items supplied with your phone may be  
different, depending on your country or service  
provider.  
You can obtain the following accessories for your  
phone from your local Samsung dealer:  
• Battery  
• Straight headset  
• PC data link kit  
• Car charger  
• Car holder  
Travel adapter  
• Advanced handsfree car kit  
9
   
Your phone  
Phone layout  
The following illustrations show the main elements  
of your phone:  
Earpiece  
Headset jack  
Volume/menu  
browse keys  
Display  
Navigation (Up/  
Down/Left/Right)  
keys  
WAP browser  
key  
Soft key (left)  
Soft key (right)  
Dial/menu  
confirmation  
key  
Power on/off/  
menu exit key  
IrDA port  
Cancel/  
correction key  
Alphanumeric  
keys  
Special  
function keys  
Microphone  
10  
       
Your phone  
Key(s) Description  
In Menu mode, scrolls through the  
screen menu options and Phonebook.  
In Idle mode, accesses your favourite  
menu options directly. For further  
details about shortcuts, see page 110.  
When entering text, moves the cursor  
to the left or right, depending on which  
side you push.  
In Idle mode, allows you to access your  
favourite menu options directly. For  
further details about shortcuts, see  
page 110.  
Performs the functions indicated by the  
screen text above them, on the bottom  
line of the display.  
(soft keys)  
In Idle mode, launches the WAP  
(Wireless Application Protocol) browser.  
In Menu mode, selects the highlighted  
menu.  
Deletes characters from the display.  
In Menu mode, returns you to the  
previous menu level.  
Makes or answers a call.  
In Idle mode, recalls the last number  
dialled or received when held down.  
11  
   
Your phone  
Key(s) Description (continued)  
Ends a call. Also switches the phone on  
and off when held down.  
In Menu mode, cancels your input and  
returns the phone to Idle mode.  
In Idle mode, accesses your voice mail  
when held down.  
Enters numbers, letters, and some  
special characters.  
Enters special characters.  
Performs various functions.  
(on the left side of the phone)  
During a call, adjusts the earpiece  
volume.  
In Idle mode, adjusts the keypad tone  
volume.  
In Menu mode, scrolls through menu  
options and Phonebook.  
12  
Your phone  
Display  
Display layout  
The display has four areas:  
Icons  
Digital clock  
Text and  
graphics area  
Soft key function  
indicators  
Menu  
Phonebook  
Area  
Description  
First line  
Displays various icons. See  
page 14.  
Second line  
Middle lines  
Shows the current time on a  
digital clock.  
Displays messages, instructions,  
and any information that you  
enter, such as the number you are  
dialling.  
Last line  
Shows the current functions  
assigned to the two soft keys.  
13  
     
Your phone  
Hard icons  
These icons appear on the icon area:  
Icon Description  
Shows the received signal strength. The  
greater the number of bars, the stronger  
the signal.  
Appears when a call is in progress.  
Appears when you are out of your service  
area. When it displays, you cannot make or  
receive a call.  
Appears when you set an alarm to ring at a  
specified time.  
Appears when a message has been  
received.  
Appears when you are out of your home  
area and have logged onto a different  
network; for example, when travelling in  
other countries.  
Appears when you are connected to the  
GPRS network.  
Appears when Silent mode is active or you  
set the phone to vibrate when you receive  
a call. You set this option in the Alert type  
menu (Menu 3.3). For further details, see  
page 29 and page 97 respectively.  
Shows the level of your battery. The more  
bars you see, the more power you have  
remaining.  
14  
     
Your phone  
Soft icons  
These icons appear on the text and graphic area:  
Appears when the IrDA port is active. For  
details, see page 101.  
Appears when the Call Diverting feature is  
activated.  
Appears when the keys are locked.  
Appears when the Security feature of the  
currently active WAP profile is activated.  
Appears when you are in the Home Zone if  
you have registered for the service.  
Appears when you are in the City Zone if  
you have registered for the service.  
Appears when Mute mode is active.  
Backlight  
The backlight illuminates the display and the  
keypad. When you press any key, the backlight  
comes on. It goes off when no keys are pressed  
within a given period of time, depending on the  
setting in the Back light menu (Menu 4.2.4). The  
display turns off after one minute to conserve  
battery power.  
To specify the length of time the backlight is active,  
set the Back light menu. See page 103 for further  
details.  
15  
   
Your phone  
Service light  
The service light is a rectangular light around the  
Navigation keys. It flashes when services are  
available on the phone.  
To activate or deactivate the service light, use the  
Service light menu (Menu 4.2.5). See page 103  
for further details.  
Service light  
16  
   
Getting started  
Installing the SIM card  
When you subscribe to a cellular network, you are  
provided with a plug-in SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available, and so on.  
Important! The plug-in SIM card and its contacts  
can be easily damaged by scratches or  
bending, so be careful when handling,  
inserting, or removing the card.  
Keep all SIM cards out of the reach of  
small children.  
1. If necessary, switch off the phone by holding  
down the  
displays.  
key until the power-off image  
2. Remove the battery. To do so:  
Slide the battery lock towards the top of the  
phone and hold it in that position.  
Lift away the battery, as shown.  
17  
       
Getting started  
3. Slide the SIM card into the SIM card socket, as  
shown, so that the card locks into position.  
Make sure that the gold-coloured contacts of the  
card face into the phone.  
Note: When you need to remove the SIM card,  
slide it, as shown, and take it out of the  
socket.  
4. Place the battery so that the tabs on the end  
aligns with the slots at the bottom of the phone.  
18  
 
Getting started  
5. Press the battery down until it clicks into place.  
Make sure that the battery is properly installed  
before switching on the power.  
Charging the battery  
Your phone is powered by a rechargeable Li-ion  
battery. A travel adapter comes with your phone for  
charging the battery. Use only approved batteries  
and chargers. Ask your local Samsung dealer for  
further details.  
The travel adapter allows you to use the phone  
while the battery is charging, but this causes the  
phone to charge more slowly.  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
battery recharges fully in approximately  
200 minutes.  
1. With the battery in position on the phone, plug  
the connector of the travel adapter into the jack  
at the bottom of the phone.  
19  
       
Getting started  
2. Plug the adapter into a standard AC wall outlet.  
3. When charging is finished, unplug the adapter  
from the power outlet and disconnect it from the  
phone by pressing the buttons on both sides of  
the connector and pulling out the connector.  
Note: You must unplug the adapter before removing  
the battery from the phone during charging;  
otherwise, the phone could be damaged.  
Low battery indicator  
When the battery is weak and only a few minutes of  
talk time remain, a warning tone sounds and a  
message repeats at regular intervals on the display.  
In this case, your phone turns off the backlight to  
conserve the remaining battery power.  
When the battery level becomes too low, the phone  
automatically turns off.  
20  
 
Getting started  
Switching on or off the phone  
1. Press and hold the  
switches on.  
key until the phone  
2. If the phone asks you to enter a password, enter  
the password and press the Ok soft key or  
key. The password is preset to “00000000” at  
the factory. For further details, see page 145.  
3. If the phone asks for a PIN, enter the PIN and  
press the Ok soft key or  
key. For further  
details, see page 146.  
The phone searches for your network and, after  
finding it, the idle screen appears on the display.  
Now, you can make or receive calls.  
Note: The display language is preset to English at  
the factory. To change the language, use  
the Language menu (Menu 4.5). For  
further details, see page 105.  
4. When you wish to switch off the phone, press  
and hold the  
displays.  
key until the power-off image  
21  
       
Getting started  
Locking or unlocking the keypad  
You can lock the keypad to avoid pressing keys by  
mistake.  
Press and hold the  
key in Idle mode until the  
icon and "Keypad locked" appear on the wallpaper.  
You can answer incoming calls using any keys, even  
if you lock the keypad. When you end the call, your  
phone returns to Key Lock mode after the period of  
time specified in the Auto key lock menu (Menu  
4.2.3).  
You can dial emergency calls even if you lock the  
keypad. Enter an emergency number. When the  
confirmation message appears, press the Yes soft  
key or the  
key. When you end the call, your  
phone returns to Key Lock mode immediately.  
To exit Key Lock mode, press the Unlock soft key  
and then press the  
key. "Keypad active" appears  
and the icon no longer displays.  
You can also set the phone to automatically lock the  
keypad in the Auto key lock menu. For further  
details, see page 103.  
22  
     
Call functions  
Making a call  
When the idle screen displays, enter the area code  
and phone number, then press the key.  
Note: When you activate the Auto redial option in  
the Extra settings menu (Menu 4.7), the  
phone will automatically redial up to ten times  
if the person does not answer the call or is  
already on the phone. See page 109 for further  
details.  
Making an international call  
1. Press and hold the  
0
key.  
The character appears.  
+
2. Enter the country code, area code, and phone  
number and press the  
key.  
Correcting the number  
To clear  
Press the  
C key.  
the last digit  
displayed  
any other digit  
in the number  
Left or Right key until the  
cursor is immediately to the  
right of the digit to be cleared  
and press the  
C
key. You can  
also insert a missing digit.  
the whole  
display  
C
key and hold it for more than  
one second.  
23  
         
Call functions  
Ending a call  
When you want to end your call, briefly press the  
key.  
Redialling the last number  
The phone stores the numbers of the calls you’ve  
dialled, received, or missed if the call recipient or  
caller is identified. See “Call records” on page 91 for  
further details.  
To recall any of these numbers:  
1. If you have typed characters on the display,  
press the  
key to return to Idle mode.  
2. Press the  
key to display a list of the most  
recent numbers used in the order you dialled or  
received them.  
3. Use the Up and Down keys to scroll through the  
numbers until the number you want highlights.  
4. T  
o
Press the  
dial the number  
edit the number  
key.  
Options soft key or  
key and select Edit  
.
Change the number,  
referring to “Correcting  
the number” on page 23.  
delete the number  
Options soft key or  
key and select Delete  
.
delete all of the  
numbers on the  
Call log list  
Options soft key or  
key and select Delete  
all. For details, see  
page 93.  
24  
   
Call functions  
Making a call from Phonebook  
You can store phone numbers that you use regularly  
on the SIM card or in the phone’s memory. These  
entries are collectively called Phonebook.  
Once you have a stored number in Phonebook, you  
can dial it by pressing a few keys. You can also  
assign your most frequently-used numbers to  
number keys using the Speed Dial feature.  
For further details about the Phonebook features,  
see page 33.  
Adjusting the volume  
During a call, if you want to adjust the earpiece  
volume, use the Volume keys on the left side of the  
phone.  
Press the  
key to increase the volume level and the  
key to decrease the level.  
In Idle mode, you can also adjust the keypad tone  
volume using these keys.  
25  
         
Call functions  
Answering a call  
When somebody calls you, the phone rings and  
displays the incoming call image.  
The caller’s phone number or name, if stored in  
Phonebook, displays.  
1. Press the  
key or the Accept soft key to  
answer the incoming call.  
When the Anykey answer option in the Extra  
settings menu (Menu 4.7) is activated, you  
can press any key to answer a call except for the  
key and the Reject soft key. See  
page 109.  
Note: To reject the call, press the Reject soft key  
or  
key.  
2. End the call by pressing the  
key.  
Note: You can answer a call while using Phonebook or  
menu features. After ending the call, the  
display returns to the function screen you were  
using.  
26  
       
Call functions  
Viewing missed calls  
When you are unable to answer a call for any  
reason, you can find out who called you so that you  
can call the person back.  
The number of calls you have missed displays on  
the idle screen immediately after a call is missed.  
To view a missed call immediately:  
1. Press the View soft key or  
key.  
The number for the most recent missed call  
displays, if available.  
2. To  
Press the  
scroll through the  
missed calls  
Up or Down key.  
call the number  
displayed  
key.  
edit or delete a missed Select soft key or  
call number key. See below.  
Editing a missed call number  
Note: When the number for the missed call is not  
available, the Edit option does not display.  
1. Press the Options soft key or  
key.  
2. Press the Up or Down key to highlight the Edit  
option.  
3. Press the Select soft key or  
key.  
4. Change the number.  
27  
   
Call functions  
5. To  
Press the  
call the number  
store the number  
key.  
Save soft key and enter a  
name and location. For  
further details, see  
page 33.  
Deleting a missed call  
1. Press the Options soft key or  
key.  
2. If necessary, press the Up or Down key to  
highlight the Delete option.  
3. Press the Select soft key or  
key.  
You can press the  
key at any time to exit the  
Missed Call feature.  
Note: You can access the Missed Call feature at any  
time by selecting the Missed calls menu  
(Menu 2.1). For further details, see page 91.  
28  
Call functions  
Quickly switching to Silent mode  
Silent mode is convenient when you wish to stop  
the phone from ringing, in a theatre for example.  
In Idle mode, press and hold the  
key until the  
“Silent mode” message and the Vibration icon (  
display.  
)
In Silent mode, your phone changes the sound  
settings as follows:  
Option  
New Setting  
Vibration  
Off  
Alert type  
Keypad tone  
SMS/MMS tone  
SMS-CB tone  
Power off tone  
Extra tones  
Light + Vibration  
Light only  
Off  
Off  
To exit and reactivate the previous sound settings,  
press and hold the key again until “Exit silent  
mode” appears. The Vibration icon ( ) no longer  
displays.  
Note: When you turn off the phone, Silent mode is  
automatically deactivated.  
29  
     
Selecting functions  
and options  
Your phone offers a set of functions that allow you  
to customise it. These functions are arranged in  
menus and sub-menus, accessed using the two soft  
keys,  
and  
. Each menu and sub-menu allows  
you to view and alter the settings of a particular  
function.  
Using the soft keys  
The roles of the soft keys vary depending on the  
function you are currently using; the labels on the  
bottom line of the display just above each key  
indicate their current role.  
Example:  
Menu  
Phonebook  
Press the right soft  
key to access the  
Phonebook feature.  
Press the left soft  
key to access Menu  
mode.  
30  
     
Selecting functions and options  
In each main menu, one of the most popular sub  
menus is assigned to the left soft key for  
example, if you select the Sound settings menu,  
Ring tone is assigned to the left soft key. This  
allows you to quickly access the most popular  
menus.  
Selecting options  
To view the various functions and options available  
and to select the one you want:  
1. Press the appropriate soft key.  
2. To  
select the:  
Press the  
key or the Select  
• function displayed  
• option highlighted  
soft key.  
view the next function Down key or  
key on  
or highlight the next  
option on a list  
the left side of the  
phone.  
move back to the  
previous function or  
option on a list  
Up key or  
the left side of the  
phone.  
key on  
move back up one  
level in the menu  
structure  
soft key or  
key.  
C
key.  
exit the menu  
structure without  
changing the settings  
31  
 
Selecting functions and options  
In some functions, you may be asked for a  
password or PIN. Enter the code and press the Ok  
soft key or  
key.  
Note: When you access a list of options, your phone  
highlights the currently active option. If,  
however, there are only two options, such as  
On/Off or Enable/Disable, your phone  
highlights the option that is not currently active  
so that you can select it directly.  
32  
Phonebook  
You can store phone numbers and their  
corresponding names in both your SIM card and  
your phone’s memories. They are physically  
separate but are used as a single entity, called  
Phonebook.  
Note: Depending on your particular SIM card, the  
maximum number of phone numbers the SIM  
card can store may differ.  
Storing a number with a name  
There are two ways to store a number:  
• Using the Save soft key or  
key in Idle mode  
• Using the Add entry option in the Phonebook  
menu  
Storing a number in Idle mode  
As soon as you start to enter a number, Save  
appears above the left soft key to allow you to store  
the number in Phonebook.  
1. Enter the number you want to store.  
Note: If you make a mistake while entering a  
number, correct it using the  
further details, see page 23.  
C
key. For  
2. When you are sure that it is correct, press the  
Save soft key or key.  
33  
       
Phonebook  
3. Select an icon to identify the category in which  
the number is to be stored. Three categories are  
available:  
: Mobile phone number  
: Office number  
: Home number  
To select the category, press the Left or Right  
key and press the Select soft key or key.  
4. Select a memory location, either SIM or Phone  
,
by pressing the Up or Down key and press the  
Select soft key or  
key.  
Note: When you change phones, any numbers  
stored in your SIM card memory are  
automatically available with the new phone,  
whereas any numbers stored in the phone’s  
memory will need to be reentered.  
5. Enter a name and press the Ok soft key or  
key.  
For further details about how to enter  
characters, see page 46.  
6. If you do not want to save the number and  
name in the suggested location, press the  
C
key  
to clear the location number and enter another  
location by pressing the number keys.  
7. Press the Ok soft key or  
key to store the  
name and number.  
After storing, the phone displays the Phonebook  
entry or name you just created.  
34  
 
Phonebook  
8. To  
use the entry options  
Press the  
Options soft key or  
key. For further  
details, see page 36.  
return to the idle  
screen  
key.  
Storing a number using the Phonebook  
menu  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Scroll to Add entry by pressing the Up or Down  
key and press the Select soft key or  
key.  
3. Select an icon to identify the category of the  
number to be stored by pressing the Left or  
Right key, and press the Select soft key or  
key.  
Note: The E-mail icon (  
) is available in this  
step. It allows you to save an e-mail  
address instead of a phone number.  
4. Select a memory location, either SIM or Phone  
,
by pressing the Up or Down key and press the  
Select soft key or  
key.  
Note: When you are saving an e-mail address,  
SIM is not available.  
5. Enter a name and press the Ok soft key or  
key.  
For further details about how to enter  
characters, see page 46.  
35  
Phonebook  
6. Enter the number or address you want to store  
and press the Save soft key or  
key.  
7. Continue the procedure from step 6 on page 34  
to store the number.  
Using Phonebook entry options  
While accessing any Phonebook entry, press the  
Options soft key or key to access the options for  
the entry.  
The following options are available:  
Edit allows you to edit the name and number.  
:
Select One entry to change the name and/or  
phone number for the selected entry. If you change  
the name, the number is saved separately with the  
new name.  
Select All entry to change only the name of the  
entry.  
Copy: allows you to copy the number to another  
location. You can select the memory location, either  
SIM or Phone, and the location number.  
Paste: allows you to paste the number into the  
normal dialling mode. Use this option to dial a  
number similar to one in Phonebook, such as a  
different extension in the same office.  
Use the  
see page 23 for further details. When you are ready  
to dial, press the key.  
C
key to change the number as required;  
Delete: allows you to delete the selected number  
from Phonebook. You are asked to confirm that you  
wish to delete the name and number by pressing  
the Yes soft key or  
key.  
36  
           
Phonebook  
Caller group: allows you to organise your  
Phonebook entries in caller groups so that the  
phone alerts you in a specific way when a person  
from one of your groups calls you. Select one of the  
ten groups available.  
To remove an entry from a group, select the No  
group option.  
For further details about how to change caller group  
properties, see page 42.  
Add entry: allows you to add a new number to the  
currently selected name.  
Dialling a number from Phonebook  
Once you have stored phone numbers in  
Phonebook, you can dial them easily and quickly by  
using the location numbers that were assigned to  
them in Phonebook.  
Note: If you cannot remember a location number, you  
need to go into the Search menu in the  
Phonebook menu to search for the entry by  
name. For details, see page 40.  
Dialling a number from the SIM card  
1. In Idle mode, enter the location number for the  
phone number you want to dial and press the  
key.  
The list of entries in the SIM card appears.  
2. You can press the Up or Down key to find other  
numbers on the list.  
37  
   
Phonebook  
3. Press the Dial soft key,  
key, or  
key when  
you have selected the number you want.  
Dialling a number from the phone’s  
memory  
1. In Idle mode, press and hold the  
appears.  
0
key. A  
+
2. Enter the location number of the phone number  
you want and press the key.  
The list of entries in the phone’s memory  
appears.  
3. You can press the Up or Down key to find other  
numbers on the list.  
4. Press the Dial soft key,  
key, or  
key when  
you have selected the number you want.  
Speed-dialling  
You can assign up to eight phone numbers from  
your Phonebook list that you use most frequently to  
the number keys (  
2
to 9), and then dial them easily  
whenever you want, simply by pressing and holding  
the associated number key.  
Setting up speed-dial entries  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Scroll to Speed dial by pressing the Up or Down  
key and press the Select soft key or  
key.  
38  
   
Phonebook  
3. Select the key to which you wish to assign the  
speed-dialling number, from the  
2
to  
9
keys,  
and press the Select soft key or  
key.  
Note: Memory location 1 is reserved for your Voice  
Mail server number.  
If you have already assigned a number to the  
key, the Options soft key replaces the Select  
soft key. Go to step 6.  
4. Select an entry from the Phonebook list and  
press the View soft key or  
key.  
5. Select a number, if the entry has more than one,  
by pressing the Up or Down key and press the  
Select soft key or  
key.  
6. Once you have assigned a number to the key,  
you can access the following options by pressing  
the Options soft key or  
key:  
Change: allows you to assign a different  
number to the key.  
Delete: allows you to clear the setting so that  
no number is assigned to the key.  
Delete all: allows you to clear the settings for  
all the keys so that no numbers are assigned  
to any of the keys.  
Number: allows you to view the number  
assigned to the key.  
7. When you are finished, press the  
key.  
soft key or  
Speed-dialling  
To speed-dial the numbers assigned to the  
keys, press and hold the appropriate key.  
2
to  
9
39  
Phonebook  
Searching for and dialling a number  
in Phonebook  
After storing numbers in Phonebook, you can  
search for them in two ways; by name and by caller  
group.  
Searching for a number by name  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Press the Select soft key or key when Search  
highlights. You are asked to enter a name.  
3. Enter the first few letters of the name that you  
want to find.  
The Phonebook entries are listed, starting with  
the first entry matching your input.  
4. To  
Press the  
view the highlighted View soft key or  
key.  
entry  
select a different  
entry  
Up or Down key until  
the entry you want  
highlights.  
look for a name  
starting with a  
different letter  
key labelled with the  
letter you want.  
5. Once you have found the entry, press the  
key to dial the number, or press the Options  
soft key or key to access the Phonebook entry  
options; for further details, see page 36.  
40  
     
Phonebook  
Searching for a number by caller group  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Scroll to Group search by pressing the Up or  
Down key and press the Select soft key or  
key. You are asked to enter a group name.  
3. Enter the first few letters of the group name that  
you want to find.  
The caller groups are listed, starting with the  
first group matching your input.  
4. If necessary, scroll to a group by pressing the Up  
or Down key and press the View soft key or  
key.  
The Phonebook entries in the caller group are  
listed.  
5. To  
Press the  
view the highlighted View soft key or  
key.  
entry  
select a different  
entry  
Up or Down key until  
the entry you want  
highlights.  
6. Once you have found the entry, press the  
key to dial the number, or press the Options  
soft key or key to access the Phonebook entry  
options; for further details, see page 36.  
41  
 
Phonebook  
Editing a caller group  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Scroll to Group edit by pressing the Up or Down  
key and press the Select soft key or  
key.  
3. Scroll through the group list by pressing the Up  
or Down key.  
4. When the group you want highlights, press the  
Options soft key or  
key.  
5. Select each option and change the settings, as  
you want. The following options are available:  
Call ringtone: allows you to set a ring tone to  
be used when you receive a call from a  
member of that group.  
SMS tone: allows you to set a ring tone to be  
used when you receive a message from a  
member of that group.  
Graphic: allows you to set a graphic icon to be  
displayed when you receive a call from a  
member of that group.  
Group name: allows you to assign a name to  
the group. For further details about how to  
enter characters, see page 46.  
6. When you are finished, press the  
key.  
soft key or  
42  
   
Phonebook  
Deleting all of the Phonebook entries  
You can delete all of the entries from your phone’s  
memory, your SIM card, or both.  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Scroll to Delete all by pressing the Up or Down  
key and press the Select soft key or  
key.  
3. To place a check mark by the memory location  
you want to empty, All SIM, or Phone, press  
the key.  
,
You can remove the check mark by pressing the  
key again.  
4. Press the Delete soft key to delete the entries in  
the selected memory location(s).  
5. Enter the phone password and press the Ok soft  
key or  
key.  
Note: The password is preset to “00000000” at  
the factory. To change this password, see  
page 106.  
6. When the confirmation message appears, press  
the Yes soft key or  
key.  
To cancel the deletion, press the No soft key.  
7. When the display asks for confirmation again,  
press the Yes soft key or  
key.  
43  
   
Phonebook  
Checking the memory status  
You can check how many names and numbers are  
stored in Phonebook, in both the SIM card and the  
phone’s memory.  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Select the Memory status option by pressing  
the Up or Down key and press the Select soft  
key or  
key.  
3. Press the Up or Down key to view the number of  
the entries you stored and the total number of  
the entries you can store in the SIM card and  
the phone’s memory.  
4. When you are finished, press the  
key.  
soft key or  
Using the service dialling numbers  
You can view the list of Service Dialling Numbers  
(SDN) assigned by your service provider. These  
numbers include emergency numbers, directory  
enquiries and voice mail numbers.  
1. When the idle screen displays, press the  
Phonebook soft key.  
2. Select the SDN option by pressing the Up or  
Down key and press the Select soft key or  
key.  
3. Scroll through the numbers by using the Up or  
Down key.  
44  
       
Phonebook  
4. To dial the number displayed, press the Dial soft  
key or  
key.  
Note: This menu is available only when your SIM card  
supports Service Dialling Numbers.  
45  
Entering text  
When using your phone, you will often need to  
enter text, such as when storing a name in  
Phonebook, creating your personal greeting or  
scheduling events on your calendar. You can enter  
alphanumeric characters by using your phone’s  
keypad.  
Your phone has the following text input modes:  
• T9 mode  
This mode allows you to enter words with only  
one keystroke per letter. Each key on the keypad  
has more than one letter; for example, pressing  
the  
5
key can enter J, K, or L. However, T9 mode  
automatically compares the series of keystrokes  
you make with an internal linguistic dictionary to  
determine the most likely word, thus requiring far  
fewer keystrokes than the traditional Alphabet  
mode.  
• Alphabet mode  
This mode allows you to enter letters by pressing  
the key labelled with the letter you want. Press  
the key once, twice, three or four times until it  
displays.  
• Number mode  
This mode allows you to enter numbers.  
• Symbol mode  
This mode allows you to enter various symbols  
and special characters.  
46  
   
Entering text  
Changing the text input mode  
When you are in a field that allows characters to be  
entered, you will notice the text input mode  
indicator on the display.  
Example: Writing a text message  
Create  
Text input  
Options  
mode indicator  
To select  
Press the right soft key  
until  
T9 mode  
displays. See page 48.  
displays. See page 50.  
displays. See page 51.  
Alphabet mode  
Number mode  
Symbol mode  
the symbol list displays.  
See page 51.  
Note: Additional text input modes may be available,  
depending on your country.  
47  
   
Entering text  
Using T9 mode  
T9 is a predictive text input mode that allows you to  
key in any character using single keystrokes. This  
text input mode is based on a built-in dictionary.  
To enter a word in T9 mode:  
1. When you are in T9 mode, start entering a word  
by pressing the  
2
to  
9
keys. Press each key only  
once for each letter.  
Example: To enter “HELLO” in T9 mode,  
press the , and keys.  
4,  
3,  
5,  
5
6
The word that you are typing appears on the  
display. It may change with each key that you  
press.  
2. Enter the whole word before editing or deleting  
the keystrokes.  
3. When the word displays correctly, go to step 4.  
If the word doesn’t display correctly, press the  
key or the Up or Down key repeatedly to display  
alternative word choices for the keys that you  
have pressed.  
0
Example: Both “OF” and “ME” use the  
6
and  
3
keys. The phone displays the most  
commonly used choice first.  
4. Insert a space by pressing the  
entering the next word.  
key and start  
48  
   
Entering text  
To add a new word into the T9 dictionary:  
1. After pressing the keys corresponding to the  
word you want to add, press the key or the  
Down key to display the alternative words.  
0
2. When you press the  
0
key or the Down key at  
the last alternative word, the display shows Add  
on the bottom line. Press the Add soft key or  
key.  
3. If necessary, clear the word using the  
C
key and  
enter the word you want to add using Alphabet  
mode. See page 50.  
4. Press the Ok soft key.  
The word is added to the T9 dictionary and  
becomes the first word for the associated  
keypress series.  
Note: This feature may not be available for some  
languages.  
To enter periods, hyphens, or apostrophes, press  
the  
1
key. T9 mode applies grammar rules to  
ensure that the correct punctuation is used.  
To shift case in T9 mode, use the  
key. There  
are three cases; Initial Capital ( ), Capital lock  
(
), and Lower case ( ).  
• You can move the cursor by using the Left and  
Right keys. To delete letters, press the key.  
Press and hold the key to clear the display.  
C
C
49  
Entering text  
Using Alphabet mode  
Use the  
1
to  
0
keys to enter your text.  
1. Press the keys labelled with the letter you want:  
- Once for the first letter  
- Twice for the second letter  
- And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a  
different key. When entering the same letter  
twice or a different letter on the same key, just  
wait for a few seconds for the cursor to move to  
the right automatically, and then select the  
next letter.  
Refer to the table below for further details about  
available characters:  
Characters in the order displayed  
Key  
Upper case  
Lower case  
Space  
Note: The characters available in Alphabet mode may  
be different, depending on the selected  
language.  
50  
   
Entering text  
To insert a space, press the  
key.  
To shift case in Alphabet mode, use the  
key.  
There are three cases; Capital lock ( ), Lower  
case ( ), and Initial Capital ( ).  
• You can move the cursor by using the Left and  
Right keys. To delete letters, press the  
C
key.  
Press and hold the key to clear the display.  
C
Using Number mode  
Number mode enables you to enter numbers into a  
text message. Press the keys corresponding to the  
digits you want to enter.  
Using Symbol mode  
Symbol mode enables you to insert symbols into a  
text message.  
To  
Press the  
select a symbol  
corresponding number  
key.  
display more symbols  
clear the symbol(s)  
Up or Down key.  
C
key. When the input  
field is empty, this key  
returns the display to the  
previous mode.  
insert the symbol(s)  
into your message  
Ok soft key or  
key.  
51  
   
Options during a call  
Your phone provides a number of control functions  
that you can use during a call.  
Putting a call on hold  
You can place the current call on hold whenever you  
want. You can make another call while you have a  
call in progress if your network supports this  
service.  
To place a call on hold, simply press the Hold soft  
key. You can reactivate the call whenever you want,  
by pressing the Unhold soft key.  
To make a call while you have a call in progress:  
1. Enter the phone number that you wish to dial or  
look it up in Phonebook.  
For details about searching for a number in  
Phonebook, see page 40.  
2. Press the  
key to dial the second call.  
The first call is automatically put on hold.  
Or,  
1. Put the current call on hold by pressing the Hold  
soft key.  
2. Make the second call in the normal way.  
52  
       
Options during a call  
When you have an active call and a call on hold, you  
may switch between the two calls, changing the one  
on hold to active and placing the other on hold.  
To switch between the two calls, simply press the  
Swap soft key.  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with that person.  
When you want to finish, end each call normally by  
pressing the  
key.  
Using the menu functions  
You can access the main menu functions during a  
call.  
1. Press the Options soft key or  
key.  
2. Press the Ok soft key or  
key when the Menu  
option highlights.  
3. Press the Up or Down key to scroll through the  
menu list.  
Note: You cannot use some menus during a call.  
They are deactivated on this list.  
For further details about available menu functions,  
see the list on page 62.  
53  
 
Options during a call  
Switching off the microphone (Mute)  
You can temporarily switch off your phone’s  
microphone so that the other person on the phone  
cannot hear you.  
Example: You wish to say something to person in  
the room, but do not want the person on  
the phone to hear you.  
To switch the microphone off temporarily:  
1. Press the Options soft key or  
key.  
2. Press the Down key to highlight the Mute  
option.  
3. Press the Ok soft key or  
key.  
The other person can no longer hear you.  
To switch the microphone back on:  
1. Press the Options soft key or  
key.  
2. If necessary, press the Down key to highlight the  
Unmute option.  
3. Press the Ok soft key or  
key.  
The other person can hear you again.  
54  
   
Options during a call  
Muting or sending key tones  
These options allow you to turn off or on the key  
tones. If the Mute keys option is selected, your  
phone does not transmit the DTMF (Dual Tone Multi-  
Frequency) tones of the keys, which allows you to  
press keys without hearing annoying key tones  
during a call.  
Note: To communicate with answering machines or  
computerised telephone systems, the Send  
keys option must be selected.  
Sending a sequence of DTMF tones  
You can send the DTMF tones as a group after  
entering the entire number you need to send.  
This option is helpful for entering a password or an  
account number when you call an automated  
system, like a banking service.  
To send the DTMF tones:  
1. While connected to the teleservice system, press  
the Options soft key or  
key.  
2. Press the Down key to highlight the Send DTMF  
option.  
3. Press the Ok soft key or  
key.  
4. Enter the number you want to send and press  
the Ok soft key or  
key.  
The tones are sent.  
55  
       
Options during a call  
Searching for a number in  
Phonebook  
You can search for a number in Phonebook during a  
call.  
1. Press the Options soft key or  
key.  
2. Press the Down key to highlight the Phonebook  
option.  
3. Press the Ok soft key or  
key.  
The Phonebook entries are listed.  
4. Enter the name that you wish to find.  
If you enter the first few letters of the name, the  
Phonebook entries are listed starting with the  
first entry matching your input.  
5. To view the highlighted entry, press the View  
soft key.  
For further details about the Phonebook feature,  
see page 33.  
56  
 
Options during a call  
Call waiting  
You can answer an incoming call while you have a  
call in progress, if your network supports this  
service and you have set the Call waiting menu  
(Menu 6.3) to Activate; see page 125. You are  
notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key to answer the incoming call.  
The first call is automatically put on hold.  
2. To switch between the two calls, press the Swap  
soft key.  
3. To end the call on hold, press the Options soft  
key or  
key and select the End held call  
option.  
To end the current call, press the  
key.  
Making a multi-party call  
A multi-party call is a network service that allows  
up to six people to take part simultaneously in a  
multi-party or conference call. For further details  
about subscribing to this service, contact your  
service provider.  
Setting up a multi-party call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way.  
The first call is automatically put on hold.  
57  
           
Options during a call  
3. To join the first participant to the multi-party  
call, press the Options soft key and select the  
Join option. Press the Ok soft key or  
key.  
4. To add a new person to the multi-party call, call  
the new person in the normal way and press the  
Options soft key or  
option and press the Ok soft key or  
key. Select the Join  
key.  
You can add incoming callers by answering the call,  
pressing the Options soft key, and selecting the  
Join option. Repeat as required.  
Having a private conversation with one  
participant  
1. Press the Options soft key or key and choose  
the Select one option. Press the Ok soft key or  
key.  
The list of call participants appears.  
2. Highlight a person from the list by pressing  
the Up or Down key, and press the Select soft  
key,  
key, or  
key.  
3. When the Private option highlights, press the  
Ok soft key or key.  
Now you can talk privately to that person. The  
other participants can still converse with each  
other.  
4. To return to the multi-party call, press the  
Options soft key or  
option. Press the Ok soft key or  
key and select the Join  
key.  
All the multi-party call participants can now hear  
each other.  
58  
Options during a call  
Dropping one participant  
1. Press the Options soft key or key and choose  
the Select one option. Press the Ok soft key or  
key.  
The list of call participants appears.  
2. Highlight a person from the list by pressing  
the Up or Down key, and press the Select soft  
key,  
key, or  
key.  
3. Press the Down key to select the Remove  
option and press the Ok soft key or key.  
The call with that participant end, but you can  
continue to talk to the others.  
4. When you want to end the multi-party call, press  
the  
key.  
59  
Using the menus  
The phone offers a range of functions that allow you  
to tailor it to your needs. These functions are  
arranged in menus and sub-menus.  
The menus and sub-menus can be accessed by  
scrolling using the Navigation keys or by using the  
shortcuts.  
Accessing a menu function by scrolling  
1. In Idle mode, press the Menu soft key to access  
Menu mode.  
2. Scroll using the Up or Down key to reach a main  
menu, Phone settings for example. Press the  
key to enter the menu.  
Note: when you select a main menu, the left soft  
key allows you to quickly access its most  
popular submenus.  
3. If the menu contains sub-menus, Language for  
example, you can access them by scrolling using  
the Up or Down key and pressing the Select  
soft key or  
key.  
If the menu that you have selected contains  
further options, repeat this step.  
4. To  
Press the  
scroll through the  
menus  
Up or Down key, or use  
the Volume keys.  
confirm the chosen  
setting  
Select soft key or  
key.  
60  
     
Using the menus  
4. To  
return to the previous  
Press the  
soft key or  
C
key.  
menu level  
exit the menu without  
changing the settings  
key.  
Using shortcuts  
The menu items, such as menus, sub-menus, and  
options, are numbered and can be accessed quickly  
by using their shortcut numbers.  
Press the Menu soft key and enter the number of  
the menu you want.  
Notes  
:
• The numbers assigned to each menu are indicated  
on the list on page 62. They may not match the  
menu number on the phone, depending on the  
services supported by your SIM card.  
• For menu number 10, use the  
0
key.  
Example: Accessing the Language menu.  
1. Press the Menu soft key.  
2. Press the  
3. Press the  
4
5
key for Phone settings  
.
key for Language  
.
The languages available display.  
61  
 
Using the menus  
List of menu functions  
The following list shows the menu structure and  
indicates the number assigned to each option and  
the page where you can find a description of each  
feature.  
Note: If you use a SIM AT card that provides  
additional services, the SIM AT menu displays  
when you press the Menu soft key to enter  
Menu mode. For further details, see your SIM  
card instructions.  
1. Messages (see page 67)  
1.1 Text messages  
1.1.1 Create  
1.1.2 Inbox  
1.1.3 Outbox  
1.1.4 Templates  
1.1.5 Settings  
1.2 Multimedia messages  
1.2.1 Create  
1.2.2 Inbox  
1.2.3 Outbox  
1.2.4 Draft  
1.2.5 Templates  
1.2.6 Settings  
1.2.7 MMS profile  
1.3 Push messages  
1.3.1 Inbox  
1.3.2 Receive  
1.3.3 Delete all  
1.4 Delete all  
1.4.1 Text messages  
1.4.2 Multimedia messages  
1.5 Voice mail  
1.5.1 Connect to voice server  
1.5.2 Voice server number  
62  
     
Using the menus  
1. Messages (continued)  
1.6 Broadcast messages  
1.6.1 Read  
1.6.2 Receive  
1.6.3 Channel list  
1.6.4 Language  
1.7 Memory status  
1.7.1 Text messages  
1.7.2 Multimedia messages  
2. Call records (see page 91)  
2.1 Missed calls  
2.2 Received calls  
2.3 Dialled calls  
2.4 Delete all  
2.5 Call time  
2.5.1 Last call time  
2.5.2 Total sent  
2.5.3 Total received  
2.5.4 Reset timers  
2.6 Call costs*  
2.6.1 Last call cost  
2.6.2 Total cost  
2.6.3 Max cost  
2.6.4 Reset counters  
2.6.5 Set max cost  
2.6.6 Price/Unit  
* Shows only if supported by your SIM card.  
63  
Using the menus  
3. Sound settings (see page 96)  
3.1 Ring tone  
3.2 Ring volume  
3.3 Alert type  
3.4 Keypad tone  
3.5 Message tone  
3.5.1 SMS tone  
3.5.2 SMS-CB tone  
3.5.3 MMS tone  
3.5.4 Repetition  
3.6 Power on/off  
3.7 Alert on call  
3.8 Extra tones  
4. Phone settings (see page 101)  
4.1 Activate infrared  
4.2 Display settings  
4.2.1 Wallpaper  
4.2.2 Menu style  
4.2.3 Auto key lock  
4.2.4 Back light  
4.2.5 Service light  
4.2.6 Graphic logo  
4.3 Greeting message  
4.4 Own number  
4.5 Language  
4.6 Security  
4.6.1 PIN check  
4.6.2 Change PIN  
4.6.3 Phone lock  
4.6.4 Change password  
4.6.5 Privacy  
4.6.6 SIM lock  
4.6.7 FDN mode*  
4.6.8 Change PIN2  
*
4.7 Extra settings  
4.8 Short cut  
4.9 Reset settings  
* Shows only if supported by your SIM card.  
64  
 
Using the menus  
5. Organiser (see page 111)  
5.1 Alarm  
5.1.1 Once  
5.1.2 Daily  
5.1.3 Morning call  
5.1.4 Remove alarm  
5.1.5 Autopower  
5.2 Calendar  
5.3 Time & Date  
5.3.1 Set time  
5.3.2 Set date  
5.3.3 World time  
5.3.4 Time format  
5.4 Calculator  
5.5 To do list  
5.6 Voice memo  
5.6.1 Record voice  
5.6.2 Voice list  
5.6.3 Delete all  
5.6.4 Memory status  
5.7 Currency exchange  
6. Network services (see page 122)  
6.1 Call diverting  
6.1.1 Divert always  
6.1.2 Busy  
6.1.3 No reply  
6.1.4 Unreachable  
6.1.5 Cancel all  
6.2 Call barring  
6.2.1 All outgoing  
6.2.2 International  
6.2.3 International except to home  
6.2.4 All incoming  
6.2.5 Incoming while abroad  
6.2.6 Cancel all  
6.2.7 Change barring password  
65  
Using the menus  
6. Network services (continued)  
6.3 Call waiting  
6.4 Network selection  
6.5 Caller ID  
6.6 Closed user group  
6.6.1 Index list  
6.6.2 Outside access  
6.6.3 Default group  
6.6.4 Deactivate*  
7. Funbox (see page 129)  
7.1 WAP browser  
7.1.1 Home  
7.1.2 Bookmarks  
7.1.3 http://  
7.1.4 WAP profile  
7.1.5 Clear cache  
7.2 Games  
7.3 Sounds  
7.4 Images  
7.5 Delete all  
7.6 Memory status  
7.6.1 Games  
7.6.2 Sounds & Images  
8. SIM AT (see page 141)  
* Shows only if the Closed User Group Feature is active.  
66  
Messages  
Using the Messages menu, you can use various  
message features, such as:  
• short text messages  
• multimedia messages  
• WAP push messages  
• voice mail  
• cell broadcast messages  
Text messages (Menu 1.1)  
Short Message Service (SMS) allows you to send  
and receive short text messages to and from other  
GSM mobile phones. In addition, your phone  
supports the Enhanced Messaging Service (EMS),  
which enables you to include simple pictures,  
melodies, and animated images in your messages.  
To use this feature, you must subscribe to your  
service provider’s message service.  
When a new text message comes in, the display  
shows the message icon (  
) a text notification  
along with the message subject. If the memory is  
full, an error message displays and you cannot  
receive any new messages. Use the Delete option  
in each message box to delete the obsolete ones.  
Create (Menu 1.1.1)  
In this menu, you can write and send a text  
message.  
Note: When you add media objects to a message, the  
number of characters you can enter decreases.  
67  
           
Messages  
Creating a simple text message  
1. Create your message.  
Note: For further details about entering  
characters, see page 46.  
2. When you finish entering the message, press  
the Options soft key or  
key. The following  
options are available:  
Send only: allows you to send the message.  
The message is deleted after sending.  
Save and send: allows you to save a copy of  
the message and then send the message. You  
can read the message in your Outbox.  
Save only: allows you to save the message so  
that it can be sent later. You can read the  
message in your Outbox.  
• For further details about Text formatting  
Add content Add templates Add from  
phonebook Add from bookmarks, and  
Language options, see page 69.  
,
,
,
,
3. Select Send only or Save and send, and press  
the Select soft key or key.  
If you want to just save the message, select  
Save only. After saving the message, the phone  
returns to the Text messages menu screen.  
4. If you select a save option, choose the memory  
location and press the Ok soft key or  
key.  
5. Enter a destination number and press the Ok  
soft key or key.  
The message is sent.  
68  
   
Messages  
Note: When the phone fails to send the message, it  
asks you if you want to retry. Press the Yes  
soft key or  
key to confirm. Otherwise, press  
the No soft key to return to the Create screen.  
Creating a text message using options  
1. Create a message.  
2. Press the Options soft key or  
key.  
3. Select one of the following options by using the  
Up and Down keys and pressing the Select soft  
key or  
key:  
Text formatting: allows you to format the  
style of the text.  
For the Size attribute, Normal  
Small sizes are available. For the Bold  
Underline, and Strikethrough attributes,  
select On or Off  
,
Large, and  
,
Italic  
,
.
These attributes can be combined.  
Add content: allows you to add a sound,  
melody, picture, or animated image to the  
message. Select the category of the object to  
be added. In each category, you can select  
from the various factory-set items or choose  
an item received from other sources, such as  
the Internet or other phones.  
Add templates: allows you to apply one of  
the preset message templates to the text.  
Select one of five items stored in the  
Templates menu (Menu 1.1.4). For further  
details, see page 72.  
Add from phonebook: allows you to add a  
Phonebook entry to your message. Select one  
from the list.  
69  
   
Messages  
Add from bookmarks: allows you to add a  
web page’s address stored in your Bookmarks  
list (Menu 7.1.2). Select one from the list.  
Language: allows you to change the language  
to be used in T9 input mode. Select the  
language you want to use.  
4. Complete the message, and send or save it by  
following the procedure from step 2 on page 68.  
Inbox (Menu 1.1.2)  
This message box is used to store messages that  
you have received.  
When you enter this menu, the list of messages in  
the box displays with the senders’ phone numbers  
or names, if available in your Phonebook.  
1. Select a message from the list and press the  
View soft key or  
key to read the message  
contents.  
2. To scroll through the contents, press the Up or  
Down key.  
3. To scroll to the previous or next message, press  
the  
or  
key.  
While reading a message, you can choose the  
following options by pressing the Options soft key  
or  
key:  
Delete: allows you to delete the message.  
Send: allows you to send/resend the message. For  
further details, see page 68.  
Text reply: allows you to send a reply to the  
sender by sending a text message.  
70  
     
Messages  
Call back: allows you to call the sender back.  
Save address: allows you to extract the sender’s  
number and URL, e-mail addresses, or phone  
numbers from the message text.  
Move to phone: allows you to move the message  
from the SIM card to the phone’s memory. This  
option is only available when you select a message  
stored in the SIM card.  
Move to SIM: allows you to move the message  
from the phone’s memory to the SIM card. This  
option is only available when you select a message  
stored in the phone’s memory.  
Select content: allows you to save media  
contents, such as sounds or images, from the  
message into your phone. You can use the contents  
when writing a message. For details, see page 69.  
Outbox (Menu 1.1.3)  
This message box is used to store messages that  
you have sent or will send.  
When you access this menu, the list of messages in  
the box displays with the recipients’ phone numbers  
or names, if available in your Phonebook.  
1. Select a message from the list and press the  
View soft key or  
key to read the message  
contents.  
2. To scroll through the contents, press the Up or  
Down key.  
3. To scroll to the previous or next message, press  
the  
or  
key  
71  
     
Messages  
While reading a message, you can choose the  
following options by pressing the Options soft key  
or  
key:  
Delete: allows you to delete the message.  
Send: allows you to send/resend the message. For  
further details, see page 68.  
Save address: allows you to extract the  
destination number and URL, e-mail addresses, or  
phone numbers from the message text.  
Move to phone: allows you to move the message  
from the SIM card to the phone’s memory. This  
option is only available when you select a message  
stored in the SIM card.  
Move to SIM: allows you to move the message  
from the phone memory to the SIM card. This  
option is only available when you select a message  
stored in the phone’s memory.  
Select content: allows you to save media  
contents, such as sounds or images, from the  
message into your phone. You can use the contents  
when writing a message. For details, see page 69.  
Templates (Menu 1.1.4)  
Using this menu, you can preset a maximum of five  
messages that you use most frequently.  
Select an empty location or the message template  
you want and press the Options soft key or  
key.  
The following options are available:  
Edit: allows you to write a new message template  
or edit an existing message template.  
Note: For further details about how to enter  
characters, see page 46.  
72  
     
Messages  
Send: allows you to retrieve the message template.  
Once you have completed the message, you can  
send, save and send, or simply save it. For further  
details about how to send a message, see page 67.  
Delete: allows you to delete the message template.  
You are asked to confirm the deletion by pressing  
the Yes soft key or  
key.  
Settings (Menu 1.1.5)  
In this menu, you can set up default SMS/EMS  
information. A setting group is a collection of  
settings required to send text messages. The  
number of setting groups available depends on the  
capacity of your SIM card.  
Notes  
:
• The setting options available in this menu may vary  
depending on your service provider.  
• The last setting you accessed is automatically  
activated for sending subsequent messages.  
Setting x (where  
x
is the setting group number):  
each group has its own sub-menu.  
Setting name: allows you to give a name to the  
setting group currently being defined.  
Service centre: allows you to store or change the  
number of your message centre, which is required  
when sending messages. You must obtain this  
number from your service provider.  
Default destination: allows you to store a default  
destination number. The number automatically  
displays on the Destination screen when you create  
a message.  
73  
 
Messages  
Default type: allows you to set the default message  
type to Text Fax, Email, or Paging. The network  
,
can convert the messages into the selected format.  
Validity period: allows you to set the length of time  
your text messages are stored in the message  
centre while attempts are made to deliver them.  
Common settings: The following options are  
available:  
Reply path: allows the recipient of your message to  
send you a reply through your message centre, if  
your network supports this service.  
Delivery reports: allows you to activate or  
deactivate the report function. When this function is  
activated, the network informs you whether or not  
your message has been delivered.  
Bearer selection: allows you to choose either GSM  
or GPRS preferred, depending on your network.  
Character support: allows you to choose a character  
type from GSM-Alphabet  
,
Uni-Code, or  
Automatic  
.
If you select Uni-Code and your recipient’s phone  
does not support it, your recipient may not be able  
to read your message.  
74  
 
Messages  
Multimedia messages (Menu 1.2)  
This menu allows you to use the Multimedia  
Message Service.  
Multimedia Message Service (MMS) is a messaging  
service very similar to Short Message Service  
(SMS). It provides automatic and immediate  
delivery of personal multimedia messages from  
phone to phone or from phone to e-mail.  
In addition to the familiar text content of text  
messages, multimedia messages can contain  
images, graphics, voice, and audio clips. An MMS  
message is a multimedia presentation in a single  
file. It is not a text file with attachments.  
Using the MMS feature, your phone can receive and  
send multimedia messages that contain multimedia  
files, such as sounds and images you downloaded  
from the Internet, and voice memos you recorded.  
This function is available only if it is supported by  
your service provider. Only phones that offer  
multimedia messaging features can receive and  
display multimedia messages.  
Create (Menu 1.2.1)  
This menu allows you to create a new multimedia  
message and then send it to multiple destinations.  
Creating and sending a multimedia message  
1. Enter the subject of your message and press the  
Next soft key or  
key.  
For further details about entering characters,  
see page 46  
.
75  
           
Messages  
2. When Add here highlights, press the Options  
soft key or key and add the message contents  
using one of the following options:  
Add text: enter the message text and press  
the Ok soft key or key.  
Add picture: allows you to select one of the  
downloaded images. You may not be able to  
add some downloaded images if they are not  
in the correct format.  
Add sound: allows you to add a sound file.  
You can record a new voice memo or select  
one of voice memos and downloaded sounds.  
You may not be able to add some downloaded  
sounds if they are not in the correct format.  
Send: allows you to send the message. Use  
this option when you finish creating the  
message.  
Save: saves the message in the Draft  
(Menu  
1.2.4) or Templates Menu 1.2.5) box for  
(
later use. For further details, see page 83.  
Settings: allows you to change the message  
settings. For further details about each setting  
option, see page 84. After changing the  
settings, you need to press the  
soft key or  
C
key to go back to the Options screen.  
Add destination: allows you to enter  
destination numbers or addresses. See steps 6  
to 11. After adding them, you need to press  
the  
soft key or  
C
key to go back to the  
Options screen.  
Preview: shows the message you created.  
Note: You can add text, an image, and a sound  
once for each page.  
76  
Messages  
3. Repeat step 2 until you have finished creating  
your message.  
4. If you want to change the added items, press  
the Up or Down key to highlight one and press  
the Options soft key or  
key to display the  
Options list.  
Note: Available options are different depending on  
whether the item you select on the  
message screen is text, an image, a sound,  
or the Page field.  
The following options are available:  
Edit text/picture/sound: allows you to  
change the text or replace the image or sound  
with another one.  
Add page: allows you to add up to five pages.  
After you add a page, the display shows you  
the current page number and memory space  
used for the page. You can move to each page  
using the Left or Right key on the message  
screen.  
Delete: deletes the item from your message.  
Duration: allows you to set when and how  
long text, an image, a sound, or a page  
displays on the message presentation screen.  
If the duration you set is shorter than the  
content duration (for example, the length of  
sound clip) for a particular page, the content  
duration is automatically decreased.  
Send: allows you to send the message.  
Save: saves the message in the Draft  
1.2.4) or Templates Menu 1.2.5) box for  
later use. For further details, see page 83.  
(Menu  
(
77  
Messages  
Settings: allows you to change the message  
settings. For further details about each setting  
option, see page 84.  
Add destination: allows you to enter  
destination numbers or addresses. See steps 6  
to 11. After adding them, you need to press  
the  
soft key or  
C
key to go back to the  
Options screen.  
Preview: shows the message you created.  
5. When you are finished creating the message,  
choose Send and press the Select soft key or  
key.  
6. Select a destination type (To  
,
Cc, or Bcc) and  
press the Select soft key or  
key.  
7. Choose one of the following options and press  
the Select soft key or key:  
Phone number: allows you to enter the  
phone number you want.  
E-Mail: allows you to enter the e-mail address  
of the recipient.  
Phonebook: allows you to retrieve a number  
from your Phonebook.  
8. Enter a number or an e-mail address, or select  
a number from Phonebook.  
9. When the correct number or address displays,  
press the Ok soft key or  
key.  
10. To add a destination, choose Add destination  
and press the Select soft key or  
key. Repeat  
from step 7.  
If you want to edit the destinations, select one  
and press the Options soft key or  
key. You  
can change or delete it.  
78  
Messages  
11. To enter additional numbers or addresses to the  
other destination types, press the  
soft key or  
C
key and repeat steps 6 through 10.  
You can enter up to 10 destinations each for To  
,
Cc, and Bcc  
.
12. When you have finished entering the  
destinations, press the Select soft key or key  
when Send message highlights.  
Your phone sends the message.  
Inbox (Menu 1.2.2)  
Viewing a message when you receive it  
When a new multimedia message comes in, the  
display shows the message icon (  
) a text  
notification along with the message subject.  
1. Press the Select soft key or  
information about the message, such as the  
sender’s number, the message size and the  
subject.  
key to view brief  
If you want to view the message later in the  
Inbox, press the Exit soft key or  
C
key.  
2. To scroll through the message information, press  
the Up or Down key.  
You can access the following options by pressing  
the Options soft key or  
key:  
Retrieve: retrieves the message from the  
MMS server.  
Delete: deletes the message.  
More properties: shows you detailed  
information about the message.  
79  
   
Messages  
3. To read the message, choose Retrieve and  
press the Select soft key or  
key.  
Your phone retrieves the message contents from  
the server and displays it.  
4. To scroll through the message, press the Up or  
Down key.  
5. When you are finished, press the  
key.  
Viewing a message from the Inbox  
When you access the Inbox menu (Menu 1.2.2),  
the list of multimedia messages you have received  
displays along with the message subjects. The icons  
on the left tell you the status of the messages.  
: MMS notifications that have been opened.  
: MMS notifications that have not been  
opened.  
: You have sent an enquiry to the MMS server  
requesting the message be sent to your  
phone.  
: The MMS server is processing your request.  
: The MMS server is unable to send the  
message to your phone.  
: Messages that have been opened.  
: Messages that have not been opened.  
1. Select a message on the list and press the  
Select soft key or key.  
The message displays and scrolls to the next  
page, if it has one, after a specified time.  
2. Press the Ok soft key or  
key to go to the  
message view screen.  
Or, the display automatically switches to the  
screen after a few seconds.  
80  
Messages  
3. To scroll through the message, press the Up or  
Down key.  
If the message has more than one page, you  
can scroll through the pages by using the Left  
and Right keys.  
4. To scroll to the previous or next message, press  
the  
or  
key  
While viewing a message, you can choose the  
Message options by pressing the Options soft key  
or  
key.  
If you are viewing a new message, the options are  
the same as when you view a message at the time  
of its receipt. See page 79.  
When you are reviewing a message retrieved from  
the MMS server, the following options are available:  
Delete: deletes the message.  
Reply: allows you to reply to the sender by sending  
a text or multimedia message.  
Callback: allows you to call the sender.  
Save address: allows you to extract the sender’s  
number or e-mail address and URL, e-mail  
addresses, or phone numbers from the message  
text.  
Forward: allows you to forward the message to  
another person. When the message contains media  
contents you have bought on the Internet,  
forwarding is not available.  
Save picture: allows you to save an image from  
the message into your phone. Pictures are stored in  
the Images folder (Menu 7.4).  
81  
   
Messages  
Save sound: allows you to save a sound from the  
message into your phone. Sounds are stored in the  
Sounds folder (Menu 7.3).  
Properties: shows you information about the  
message, such as the message status, subject,  
sender’s e-mail address or phone number, message  
size, priority, and the time and date the message  
was received.  
Outbox (Menu 1.2.3)  
When you access this menu, the list of the  
multimedia messages you have sent or saved  
displays. The icons on the left tell you the status of  
the messages.  
: Messages currently being sent  
: Messages sent  
: Messages your phone couldn’t send  
: Messages to be sent  
: Messages deferred  
1. Select a message on the list and press the  
Select soft key or key.  
The message displays and scrolls to the next  
page, if it has one, after a specified time.  
2. Press the Ok soft key or  
key to go to the  
message view screen.  
Or, the display automatically switches to the  
screen after a few seconds.  
3. To scroll through the message, press the Up or  
Down key.  
82  
   
Messages  
If the message has more than one page, you  
can scroll through the pages by using the Left  
and Right keys.  
4. To scroll to the previous or next message, press  
the  
or  
key  
While viewing a message, you can choose the  
following options by pressing the Options soft key  
or  
key:  
Delete: deletes the message.  
Save address: allows you to extract the  
destination numbers or e-mail addresses and URL,  
e-mail addresses, or phone numbers from the  
message text.  
Send: allows you to send/resend the message.  
Edit: allows you to change the message contents,  
sound, picture, or text.  
Properties: shows you information about the  
message, such as the message status, subject,  
sender and recipients’ e-mail addresses or phone  
numbers, message size, and the time and date the  
message was sent.  
Draft (Menu 1.2.4)  
After creating a multimedia message, you can store  
it in this message box for later sending.  
For further details about viewing a message, see  
“Outbox” on page 82.  
83  
     
Messages  
Templates (Menu 1.2.5)  
This menu stores messages you saved as templates  
so that you can use them to make new messages.  
1. Scroll through the template list using the Up and  
Down keys.  
2. When the message template you want  
highlights, press the View soft key or  
key.  
3. Press the Ok soft key or key to access the  
following options, or the display automatically  
shows the options after a specified time:  
Edit: allows you to send a message using the  
template. For further details about how to  
send a message, see page 75.  
Delete: allows you to delete the message  
template. You are asked to confirm the  
deletion by pressing the Yes soft key or key.  
4. Press the  
key to return to Idle mode.  
Settings (Menu 1.2.6)  
You can change the default settings for sending or  
receiving multimedia messages.  
The following options are available:  
Delivery report: when this option is enabled, the  
network informs you whether or not your message  
has been delivered.  
Read reply: when this option is enabled, your  
phone sends a request for a reply along with your  
message to the recipient.  
84  
     
Messages  
Auto download: you can set whether or not your  
phone retrieves new incoming messages from the  
MMS server without notifications.  
Off: you need to manually download new messages  
by using the Retrieve option.  
On: the phone automatically retrieves new  
messages from the server. As soon as you receive a  
message you can use more options while you are  
reading. See page 81 for details about the options.  
Off when roaming: the phone automatically  
downloads new messages unless you are roaming  
on another network or in another country.  
Message acceptance: you can specify the  
category of messages you want to receive.  
Hide ID: when this option is enabled, your phone  
number does not display on the recipient’s phone.  
Validity period: you can select the length of time  
your messages are stored in the message centre  
after they are sent.  
Delivery time: you can set a time delay before the  
phone sends your messages.  
Priority: you can select the priority level of your  
messages.  
Report allowed: when this option is enabled, the  
sender of an incoming message receives a delivery  
report from the network.  
Page duration: you can set the length of time one  
page of an outgoing message displays on the  
message presentation screen. After a specified  
time, the display automatically scrolls to the next  
page.  
85  
Messages  
MMS profile (Menu 1.2.7)  
In this menu, you can configure various network  
settings that are required when you send or receive  
multimedia messages.  
Notes  
:
• The last profile you accessed is automatically  
activated for sending subsequent messages.  
• If you change the MMS settings without first  
checking with your service provider, the MMS feature  
may not work properly.  
• The availability of the setting options may vary  
depending on your country.  
The following options are available for each profile:  
Profile name: enter a name that you wish to  
assign to the MMS server.  
Connection URL: enter the address of your MMS  
server.  
Security: select a data transmission mode. Choose  
Secure to protect your data against unauthorised  
access; otherwise, choose Non-Secure  
.
IP address: enter the gateway address required to  
connect to the MMS server.  
User name: enter the user ID required to connect  
to the MMS server.  
Password: enter the password required to connect  
to the MMS server.  
APN: enter the access point name used for the  
address of the MMS server.  
For further details, contact your service provider.  
86  
Messages  
Push messages (Menu 1.3)  
In this menu, you can receive and access web  
messages from the server.  
The following options are available:  
Inbox: allows you to read the messages received  
from the web server.  
Receive: allows you to set whether or not your  
phone receives web messages. Select Always to  
receive web messages, or Never to reject web  
messages.  
Delete all: allows you to delete all of the web  
messages.  
Delete all (Menu 1.4)  
This menu allows you to delete all of the messages  
in each message box separately. You can also delete  
all of your messages at one time.  
1. Select a message type and press the Select soft  
key or  
key.  
2. To  
Press the  
select a message  
box to clear  
Up or Down key. To  
delete all of your  
messages, select All  
messages  
.
place or remove a  
check mark  
key.  
3. Press the Delete soft key to delete the marked  
messages.  
87  
       
Messages  
4. When a confirmation message displays, press  
the Yes soft key or  
key to confirm.  
5. When the phone asks for confirmation again,  
press the Yes soft key or  
key.  
Voice mail (Menu 1.5)  
This menu allows you to access your voice mail box,  
if your network supports this service.  
The following options are available:  
Connect to voice server: before using the Voice  
Mail feature, you must enter the voice server  
number obtained from your service provider. You  
can then select this option and press the Ok soft  
key to listen to your messages.  
You can quickly connect to the voice server by  
pressing and holding the  
1
key in Idle mode.  
Voice server number: allows you to change the  
voice mail server number, if necessary.  
Note: Voice Mail is a network feature. Please contact  
your service provider for further details.  
88  
   
Messages  
Broadcast messages (Menu 1.6)  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Cell Broadcast (CB) messages display as  
soon as they are received, provided that:  
• the phone is in Idle mode.  
• the Receive option is set to Enable  
.
• the message channel is currently active on the  
channel list.  
The following options are available:  
Read: lets you view the received messages.  
The Volatile box displays messages from the  
network, but loses its contents as soon as the  
phone is switched off. Scroll through the messages  
by using the Up and Down keys.  
You can save a CB message in the Archive box for  
later retrieval. When a text notification appears,  
press the Options soft key and select Save  
.
Receive: allows you to enable or disable the  
reception of broadcast messages.  
Channel list: allows you to indicate the channels  
from which you wish to receive broadcast  
messages. The following options are available:  
Select: use to enable or disable channels on the list  
by marking or unmarking them, respectively. A  
check mark displays in front of each selected  
channel.  
Add channel: use to enter the ID and title for a new  
channel.  
Delete: use to remove a channel from the list.  
89  
   
Messages  
Edit: use to change the ID and title of an existing  
channel.  
Language: allows you to select your preferred  
language to display cell broadcast messages.  
Please contact your service provider for further  
details.  
Memory status (Menu 1.7)  
You can check the amount of memory being used  
and the amount remaining for messages.  
The following options are available:  
Text messages: shows the number of messages  
currently stored and the total number of messages  
you can store in the SIM, Phone, and CB memories.  
Multimedia messages: shows the total space,  
including the free and used space, and how much  
space is currently occupied by each message box.  
You can also view the number of messages you  
stored and the number of messages you can store.  
Press the Up or Down key to scroll through the  
screen.  
90  
     
Call records  
In this menu, you can view the:  
• calls you missed, received, or dialled.  
• length of your calls.  
• cost of your calls, if your SIM card supports it.  
Notes  
• You can access the call records of all three types of  
calls by pressing the key in Idle mode.  
:
• The number of call records the phone can store may  
vary depending on your SIM card.  
Missed calls (Menu 2.1)  
This menu lets you view the 20 most recent calls  
you received, but did not answer.  
The number or name, if available, displays together  
with the time and date the call was received.  
By pressing the Options soft key or  
key, you  
can:  
• edit the number, if available, and dial it or save it  
in Phonebook.  
• delete the call from the list.  
You can also dial the number by pressing the  
key.  
91  
         
Call records  
Received calls (Menu 2.2)  
This menu lets you view the 20 most recent calls  
you received.  
The number or name, if available, displays together  
with the time and date the call was received.  
By pressing the Options soft key or  
key, you  
can:  
• edit the number, if available, and dial it or save it  
in Phonebook.  
• delete the call from the list.  
You can also dial the number by pressing the  
key.  
Dialled calls (Menu 2.3)  
This menu lets you view the 20 most recent calls  
you dialled.  
The number or name, if available, displays together  
with the time and date the call was made.  
By pressing the Options soft key or  
key, you  
can:  
• edit the number and dial it or save it in  
Phonebook.  
• delete the call from the list.  
You can also dial the number by pressing the  
key.  
92  
       
Call records  
Delete all (Menu 2.4)  
This menu allows you to delete all of the records in  
each call record separately. You can also delete all  
of your call records at one time.  
1. To  
select a call record  
Press the  
Up or Down key. To  
to clear  
delete all of your call  
records, select All calls  
.
place or remove a  
check mark  
key.  
2. Press the Delete soft key to delete the marked  
records.  
3. When a confirmation message displays, press  
the Yes soft key or  
key to confirm.  
4. When the phone asks for confirmation again,  
press the Yes soft key or key.  
93  
   
Call records  
Call time (Menu 2.5)  
This menu lets you view the time log for calls made  
and received.  
Note: The actual time invoiced by your service  
provider may vary, depending on network  
features, rounding-off for billing purposes, and  
so on.  
The following time logs are available:  
Last call time: shows the length of the last call.  
Total sent: shows the total length of all calls you  
have made since the timer was last reset.  
Total received: shows the total length of all calls  
you have received since the timer was last reset.  
Reset timers: allows you to reset the call timers.  
You must first enter the phone password and then  
press the Ok soft key or  
key.  
Note: The password is preset to “00000000” at the  
factory. To change this password, see  
page 106.  
94  
   
Call records  
Call costs (Menu 2.6)  
This network feature lets you view the cost of calls.  
This menu may not be available depending on your  
SIM card.  
The following options are available:  
Last call cost: shows the cost of the last call you  
made.  
Total cost: shows the total cost of all calls you  
have made since the cost counter was last reset. If  
the total cost exceeds the maximum cost set in the  
Set max cost option, you can no longer make any  
calls until you reset the counter.  
Max cost: shows the maximum cost set in the Set  
max cost option. See below.  
Reset counters: allows you to reset the cost  
counter. You must first enter your PIN2 (see  
page 147) and then press the Ok soft key or  
key.  
Set max cost: allows you to enter the maximum  
cost authorised for your calls. You must first enter  
your PIN2 (see page 147) and then press the Ok  
soft key or  
key.  
Price/Unit: allows you to set the cost of one unit;  
this price per unit is applied when calculating the  
cost of your calls. You must first enter your PIN2  
(see page 147) and then press the Ok soft key or  
key.  
95  
   
Sound settings  
You can use the Sound Settings feature to  
customise various settings, such as the:  
• ring melody, volume, and type.  
• sounds made when you press a key, receive a  
message, or switch on or off your phone.  
• alert tone made every minute during a call, when  
you make an error, or when your call is connected  
to the system.  
Note: When the phone is in Silent mode (see  
page 29), you cannot change the sound  
settings.  
Ring tone (Menu 3.1)  
This menu allows you to select a ring melody.  
You can choose between many different melodies. If  
you have downloaded sounds from the WAP  
browser or the optional EasyGPRS programme, you  
can use them in this menu.  
Ring volume (Menu 3.2)  
This menu allows you to adjust the ring volume to  
one of five levels.  
Use the Up and Down keys or the Volume keys on  
the left side of the phone to increase or decrease  
the volume.  
96  
           
Sound settings  
Alert type (Menu 3.3)  
This menu allows you to specify how you are to be  
informed of incoming calls.  
The following options are available:  
Light only: the service light flashes; the phone  
neither rings nor vibrates.  
Melody: the phone rings using the selected ring  
tone or alarm melody.  
Vibration: the phone vibrates but does not ring.  
Vibra+Melody: the phone first vibrates three  
times and then starts ringing.  
Keypad tone (Menu 3.4)  
This menu allows you to select the tone that the  
phone sounds when you press a key.  
To turn off the sound, select Off  
.
Message tone (Menu 3.5)  
This menu allows you to select how the phone  
informs you that a new message has been received.  
SMS tone (Menu 3.5.1)  
The following options are available for alerting you  
to new SMS messages:  
Off: the phone does not use an SMS tone.  
Light only: the service light flashes.  
97  
             
Sound settings  
Vibration: the phone vibrates.  
Single beep: the phone beeps once.  
SMS tone x: the phone uses one of several SMS  
tones.  
SMS-CB tone (Menu 3.5.2)  
The following options are available for alerting you  
to new cell broadcast (CB) messages:  
Off: the phone does not use a CB tone.  
Light only: the service light flashes.  
Vibration: the phone vibrates.  
Single beep: the phone beeps once.  
SMS-CB tone x: the phone uses one of several CB  
tones.  
MMS tone (Menu 3.5.3)  
The following options are available for alerting you  
to new MMS messages:  
Off: the phone does not use an MMS tone.  
Light only: the service light flashes.  
Vibration: the phone vibrates.  
Single beep: the phone beeps once.  
MMS tone x: the phone uses one of several MMS  
tones.  
98  
Sound settings  
Repetition (Menu 3.5.4)  
This menu allows you to specify how often the  
phone informs you of a new message.  
You can choose either Once or Periodic  
.
Power on/off (Menu 3.6)  
This menu allows you to select the melody that the  
phone sounds when it is switched on or off.  
To turn off the sound, select Off  
.
Alert on call (Menu 3.7)  
This menu allows you to choose whether or not the  
phone informs you when you receive a new  
message or when the time for an alarm comes  
during a call.  
The following options are available:  
Off: the phone doesn’t actively alert you to  
incoming messages or alarms. It only displays the  
corresponding notification in case of alarm.  
On: the phone alerts you with a beep and displays  
the corresponding notification.  
99  
     
Sound settings  
Extra tones (Menu 3.8)  
You can customise additional tones for the phone.  
To turn a given  
tone  
Press the  
on  
Mark soft key or  
key.  
A check mark displays in  
front of the option.  
off  
Unmark soft key or  
The check mark no longer  
displays.  
key.  
The following options are available:  
Error tone: sets whether or not the phone informs  
you when a mistake is made.  
Minute minder: sets whether or not the phone  
beeps every minute during an outgoing call to keep  
you informed of the length of your call.  
Connect tone: sets whether or not your phone  
beeps when your call is connected to the system.  
100  
         
Phone settings  
Many different features of your phone can be  
customised to suit your preferences. All of these  
features are accessed in the Phone settings  
menu.  
Activate infrared (Menu 4.1)  
This feature allows you to send or receive data  
through the infrared port. To use an infrared  
connection, you must:  
• configure and activate an IrDA-compliant infrared  
port on your PC.  
• activate the infrared feature on the phone; the  
IrDA icon ( ) appears on the wallpaper of the  
display.  
• align the IrDA port on the phone with the IrDA  
port on your computer.  
IrDA port  
IrDA port  
The connection is ready for data transmission.  
If there is no communication between your phone  
and the IrDA-compliant device within 30 seconds of  
activating the feature, it is automatically  
deactivated.  
Note: For optimal performance, use an optional data  
link cable. You can purchase one from your local  
Samsung dealer.  
101  
     
Phone settings  
Display settings (Menu 4.2)  
In this menu, you can change various settings for  
the display or backlight.  
Wallpaper (Menu 4.2.1)  
This menu allows you to change the background  
image to be displayed in Idle mode.  
The following options are available:  
Wallpaper list: you can select a background image  
to be displayed on the idle screen.  
To change the background image:  
1. Scroll through the list by pressing the Up or  
Down key.  
You have various preset images available. You  
can also select a blank background or any  
images downloaded from the Internet, WAP  
browser and optional EasyGPRS programme, or  
received in messages.  
2. Press the Select soft key or  
key when the  
image you want highlights.  
3. When the image displays, press the Select soft  
key or key to display it on the idle screen.  
Text display: you can specify whether or not the  
phone displays the time and date on the idle  
screen.  
Menu style (Menu 4.2.2)  
This menu allows you to select the menu display  
style. You can choose from Bar style, Page style,  
and Cycle style  
.
102  
     
Phone settings  
Auto key lock (Menu 4.2.3)  
This menu allows you to set the phone to  
automatically lock the keys if no key is pressed  
within a given period of time. This feature is useful  
to avoid pressing keys by mistake.  
To use this feature, select the length of time for  
which the phone waits before it locks the keypad.  
If you do not want to use this feature, select Off  
.
Note: You can manually lock the keypad. For further  
details, see page 22.  
Back light (Menu 4.2.4)  
You can select the length of time the backlight is on.  
The backlight turns on when you press a key, when  
you receive a call or message and remains on for  
the specified length of time.  
Service light (Menu 4.2.5)  
This menu allows you to select whether or not the  
service light is used or in which colour it flashes.  
Select one of the seven colour settings. When the  
phone is ready for use, the service light flashes in  
the appropriate colour.  
If you do not wish to use the service light,  
select Off  
.
103  
     
Phone settings  
Graphic logo (Menu 4.2.6)  
This menu allows you to display your service  
provider’s logo instead of its name.  
Off: the service provider’s name displays in Idle  
mode.  
On: the service provider’s logo stored in your phone  
displays in Idle mode; if no logo has been stored,  
the service provider’s name displays.  
Greeting message (Menu 4.3)  
This menu allows you to set a greeting to be  
displayed briefly when the phone is switched on.  
For further details about how to enter characters,  
see page 46.  
Own number (Menu 4.4)  
This function is a memory aid, which you can use to  
check your own phone numbers if you need to do so.  
You can:  
• assign a name to each of the own phone numbers  
registered on your SIM card.  
• edit the names and numbers.  
Any changes made here do not in any way affect  
the actual subscriber numbers on your SIM card.  
104  
         
Phone settings  
Language (Menu 4.5)  
You can select a display language. When the  
language option is set to Automatic, the language  
is automatically selected according to the language  
of the SIM card used.  
Note: Depending on your country, service provider, or  
the software version of the phone, the  
Automatic option may not display.  
Security (Menu 4.6)  
The Security feature enables you to restrict the use  
of your phone by others and to restrict the types of  
calls made.  
Various codes and passwords are used to protect  
the features of your phone. They are described in  
the following sections. Also see pages 145-148.  
PIN check (Menu 4.6.1)  
When the PIN Check feature is enabled, you must  
enter your PIN each time you switch on the phone.  
Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
Note: Before disabling the PIN Check feature, you  
must enter your PIN.  
The following options are available:  
Disable: the phone connects directly to the  
network when you switch it on.  
Enable: you must enter the PIN each time the  
phone is switched on.  
105  
         
Phone settings  
Change PIN (Menu 4.6.2)  
This feature allows you to change your current PIN  
to a new one, provided that the PIN Check feature  
is enabled. You must enter the current PIN before  
you can specify a new one.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Phone lock (Menu 4.6.3)  
When the Phone Lock feature is enabled, the phone  
is locked and you must enter a 4- to 8-digit phone  
password each time the phone is switched on.  
The password is preset to “00000000” at the  
factory. To change the phone password, see the  
Change password menu (Menu 4.6.4).  
Once the correct password has been entered, you  
can use the phone until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone  
password when you switch on the phone.  
Enable: you are required to enter the phone  
password when you switch on the phone.  
Change password (Menu 4.6.4)  
The Change Password feature allows you to change  
your current phone password to a new one. You  
must enter the current password before you can  
specify a new one.  
The password is preset to “00000000” at the  
factory. Once you have entered a new password,  
you are asked to confirm it by entering it again.  
106  
       
Phone settings  
Privacy (Menu 4.6.5)  
Using this menu, you can lock your media contents,  
such as multimedia messages, voice memos,  
images, and sounds. Once you have locked the  
contents, you must enter the phone’s password to  
access the associated menus.  
To  
Press the  
select an item to  
lock  
Up or Down key. To lock all  
of the contents, select All  
.
place or remove a  
check mark  
key.  
lock the marked  
items  
Ok soft key.  
When the phone asks for the password, enter the  
password and press the Ok soft key or key.  
Note: The password is preset to “00000000” at the  
factory. To change this password, see  
page 106.  
SIM lock (Menu 4.6.6)  
When the SIM Lock feature is enabled, your phone  
only works with the current SIM. You must enter  
the SIM lock code to use a different SIM card.  
Once you have entered the lock code, you are  
asked to confirm it by entering it again.  
To unlock the SIM, you must enter the SIM lock  
code.  
107  
     
Phone settings  
FDN mode (Menu 4.6.7)  
FDN (Fixed Dial Number) mode, if supported by  
your SIM card, allows you to restrict your outgoing  
calls to a limited set of phone numbers.  
The following options are available:  
Disable: you can call any number.  
Enable: you can only call phone numbers stored in  
Phonebook. You must enter your PIN2.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu does not display.  
Change PIN2 (Menu 4.6.8)  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the  
current PIN2 before you can specify a new one.  
Once you have entered a new PIN2, you are asked  
to confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu does not display.  
108  
   
Phone settings  
Extra settings (Menu 4.7)  
You can turn the automatic redialling or answering  
features on or off.  
To turn a feature  
Press the  
on  
Mark soft key or  
key. A  
check mark displays in  
front of the option.  
off  
Unmark soft key or key.  
A check mark no longer  
displays.  
The following options are available:  
Auto redial: this menu allows you to set the phone  
makes up to ten attempts to redial a phone number  
after an unsuccessful call.  
Note: The interval between attempts varies.  
Anykey answer: this menu allows you to answer  
an incoming call by pressing any key, except the  
key or Reject soft key. To reject the call, press  
the  
key or Reject soft key.  
When this option is unchecked, you must press the  
key or Accept soft key to answer a call.  
109  
       
Phone settings  
Short cut (Menu 4.8)  
The Navigation keys can be used as shortcut keys.  
In Idle mode, they allow you to access specific  
menus directly.  
To assign a shortcut to a key:  
1. Select the key to be used as a shortcut key by  
pressing the Up or Down key and press the  
Select soft key or  
key.  
2. Select the menu to be assigned to the key by  
pressing the Up or Down key.  
Note: To deactivate a shortcut key, select the  
None option.  
3. Press the Select soft key or  
key to save the  
selection.  
Reset settings (Menu 4.9)  
You can easily reset your phone to its default  
settings.  
To reset your phone, enter the 4- to 8-digit phone  
password and press the Ok soft key or  
key.  
Note: The password is preset to “00000000” at the  
factory. To change this password, see  
page 106.  
110  
         
Organiser  
The Organiser feature enables you to:  
• set an alarm so that the phone rings at a specific  
time, for example, to remind you of an  
appointment.  
• view the calendar and organise your schedule.  
• set the current time and date.  
• define a list of things to do.  
• record voice memos.  
• use the phone as a calculator for basic  
mathematical equations or currency exchange  
operations.  
Alarm (Menu 5.1)  
This feature allows you to:  
• set the alarm to ring at a specific time.  
• set the phone to switch on automatically and ring  
the alarm even if the phone is switched off.  
The following options are available:  
Once: the alarm rings only once and is then  
deactivated.  
Daily: the alarm rings every day at the same time.  
Morning call: the alarm rings to wake you up in  
the morning.  
111  
         
Organiser  
To set an alarm:  
1. Choose the type of alarm to be set and press the  
Select soft key or  
key.  
2. Enter the time for the alarm to sound.  
Note: Your phone is preset to a 24-hour format.  
To change the format, see page 116.  
If you want to use the alarm options, press the  
Options soft key. The following options are  
available:  
Remove alarm: deactivates the current  
alarm.  
Alarm sound set: allows you to select the  
alarm melody.  
3. Press the  
key.  
4. If applicable, select AM or PM and press the  
Select soft key.  
5. If you select Morning call in step 1, choose the  
repeat option, Monday to friday or Monday to  
saturday, and press the Select soft key or  
key.  
To stop the alarm when it rings, press one of the  
Volume keys or press the Exit soft key,  
C
key, or  
key.  
Remove alarm: deactivates all alarm settings.  
Autopower: when this option is set to Enable, the  
alarm rings at the specified time, even if the phone  
is switched off.  
If the menu option is set to Disable and the phone  
is switched off at the specified time, the alarm does  
not ring.  
112  
Organiser  
Calendar (Menu 5.2)  
With the Calendar feature, you can:  
• consult the calendar and check your memos.  
• write memos to keep track of your schedule.  
• set an alarm to act as a reminder.  
Consulting the calendar  
When you select the Calendar menu (Menu 5.2),  
the calendar displays with today’s date highlighted.  
The following options are available when you press  
the Options soft key:  
Search all: displays all of the memos, starting with  
the oldest, regardless of the day. To scroll through  
the memos, press the Left or Right key.  
Delete all: allows you to delete all of the memos.  
You are asked to confirm your action.  
Go to date: allows you to go to a specific date.  
Exit: exits the Calendar feature and returns to Idle  
mode.  
Writing a memo  
You can make up to 100 memos. More than one  
memo can be made for one day..  
To write or edit a memo on a specific date:  
1. Select a date on the calendar, using the  
Navigation keys.  
Note: To skip to the previous or next month,  
press the Volume keys on the left side of  
the phone.  
113  
     
Organiser  
2. Press the  
key.  
An empty memo screen displays allowing you to  
enter your memo.  
3. Enter your memo and then press the Ok soft  
key or  
key.  
Note: For further details about how to enter  
characters, see page 46.  
You are asked if you wish to set an alarm.  
4. If you want an alarm to ring on the chosen day,  
press the  
key.  
Otherwise, press the Skip soft key. The memo is  
saved.  
5. If you pressed the  
alarm and press the  
key, enter the time for the  
key.  
Note: Your phone is preset to a 24 hour format.  
To change the format, see page 116.  
You can also select the melody for the alarm by  
pressing the Melody soft key.  
6. If applicable, select AM or PM and press the  
Select soft key or  
key.  
The colour of the date on the calendar changes to  
green to indicate that a memo exists for that date.  
Viewing a memo  
When you select a day on which more than one  
memo exists, the latest memo for that day displays.  
In that case, press the Up or Down key to scroll to  
the previous or next memo.  
114  
 
Organiser  
You can access the following options by pressing the  
Options soft key or  
key:  
New: allows you to add a new memo.  
Edit: allows you to change the memo text.  
Alarm: allows you to set an alarm to ring at a  
specified time to remind you of the memo. If you  
have already set an alarm for that memo, you can  
change or delete the alarm.  
Delete: deletes the memo.  
Copy to: allows you to copy the memo to another  
date.  
Move to: allows you to change the date of the  
memo.  
Time & Date (Menu 5.3)  
This menu allows you to change the current time  
and date displayed. You can also find out what time  
it is in another part of the world.  
The following options are available:  
Set time: allows you to enter the current time. You  
can choose the time format in the Time format  
menu (Menu 5.3.4).  
Note: Before setting the time, you must specify your  
time zone in the World time menu (Menu  
5.3.3). See the following page.  
Set date: allows you to enter the day, month, and  
year.  
115  
           
Organiser  
World time: allows you to find out what time it is  
in another part of the world, using the Left and  
Right keys.  
The screen shows the:  
• city name.  
• current time and date.  
• time difference between the selected city and  
your city if you have set the local time (see below  
for further details).  
To select your time zone:  
1. Select the city corresponding to your time zone  
by pressing the Left or Right key one or more  
times.  
The local time and date display.  
2. Press the Set soft key or  
key.  
Time format: allows you to change the time  
format to 12 hours or 24 hours  
.
Calculator (Menu 5.4)  
With this feature, you can use the phone as a  
calculator. The calculator provides basic arithmetic  
functions: addition, subtraction, multiplication, and  
division.  
1. Enter the first number using the numeric keys.  
Notes  
To move the cursor to the left or right, press the  
or key.  
:
To include a decimal point or a bracket, press the  
left soft key until the symbol you want displays.  
116  
         
Organiser  
2. Press the right soft key until the arithmetic  
symbol you want appears: (addition),  
(subtraction), (multiplication), (division).  
+
-
/
3. Enter the second number.  
4. To view the result, press the  
key.  
5. Repeat steps 1 to 4 as many times as required.  
To do list (Menu 5.5)  
This feature allows you to:  
• enter a list of tasks to be done.  
• assign a priority and a deadline to each task.  
• sort the tasks by priority and status.  
Creating the To do list  
1. Press the New soft key or  
key.  
2. Enter the first task.  
Note: For further details about how to enter  
characters, see page 46.  
3. Press the Ok soft key or  
key.  
4. Select a priority level of high, normal, or low  
priority using the Up and Down keys and press  
the Select soft key or  
key.  
5. Enter your deadline and press the  
key.  
If you do not want to set a deadline, press the  
Skip soft key.  
117  
     
Organiser  
Editing the To do list  
When you select the To do list menu (Menu 5.5),  
the current contents display with a check mark,  
indicating whether tasks has been done, and its  
priority level;  
for Low.  
for High,  
for Normal, and  
To view the details for a task, select it from the list.  
You can scroll to other task by pressing the Up or  
Down key.  
To change the status of a task, press the  
key to  
mark the task as completed as of the current time  
and date.  
By pressing the Options soft key or  
key on the  
list or the task view, you can access the following  
options:  
New: allows you to create a new task.  
Mark: allows you to change the status of the  
current task to either Done or Undo  
.
Edit: allows you to change the text, priority, and/or  
deadline for the current task.  
Sort: allows you to sort the existing tasks by  
priority of status. Select the sort criteria, High  
,
Low Done, or Undo  
,
.
Copy: makes a copy of the current task.  
Copy to calendar: allows you to copy the current  
task as a calendar memo. You can change the text  
and deadline for the task, and set the alarm.  
Delete: deletes the current task.  
Delete all: allows you to delete all of the tasks.  
Exit: exits the To do list.  
118  
   
Organiser  
Voice memo (Menu 5.6)  
You can record voice memos. After recording, you  
can send the memo to other people via Multimedia  
Message Service.  
Record voice (Menu 5.6.1)  
This menu allows you to record a new memo. When  
you select this option, the display shows a 30-  
second timer.  
1. To start recording, press the Record soft key or  
key.  
2. Record a memo by speaking into the  
microphone.  
3. When you press the Stop soft key or key, or if  
the recording time expires, the following options  
display:  
Replay: plays back your memo.  
Re-record: discards the memo and enables  
you to record another one.  
Save: allows you to save the memo.  
Quit: cancels your recording and exits the  
Record voice menu.  
4. To save the memo, choose Save and press the  
Select soft key or key.  
5. Press the  
C
key to clear the default name, if  
necessary, and enter a name for the memo.  
For further details about how to enter  
characters, see page 46.  
119  
   
Organiser  
6. Press the Ok soft key or  
key.  
The memo is saved and then the display shows  
the memo information.  
7. Press the Options soft key or  
key to access  
the following memo options:  
Send: allows you to send the memo to other  
people by using the MMS feature. See page 75  
for further details about sending a message.  
Rename: allows you to change the memo’s  
name.  
Delete: allows you to delete the memo.  
8. To exit, press the  
soft key or  
key.  
Voice list (Menu 5.6.2)  
This menu shows a list of saved voice memos.  
Scroll to a memo and press the Options soft key or  
key. The following options are available:  
Play: plays the memo.  
Send: allows you to send the memo to other people  
by using the MMS feature. See page 75 for further  
details about sending a message.  
Rename: allows you to change the memo’s name.  
Properties: displays information about the memo,  
such as the name, the date when the memo was  
made, recording duration, and file size.  
Delete: allows you to delete the memo.  
120  
     
Organiser  
Delete all (Menu 5.6.3)  
In this menu, you can delete all of your voice  
memos.  
When the confirmation message appears, press the  
Yes soft key or  
key. When the display asks for  
confirmation again, press the Yes soft key or key.  
Memory status (Menu 5.6.4)  
You can check the amount of memory being used  
and the memory remaining for voice memos.  
The display shows the total, free, and used  
memory, including the number of memos you  
recorded and the total number of the memos you  
can record. Press the Up or Down key to scroll  
through the screen.  
Currency exchange (Menu 5.7)  
Using this menu, you can figure out currency  
conversions.  
1. Enter the current exchange rate of your source  
currency and press the Ok soft key or  
key.  
You can insert a decimal point by pressing  
the key  
.
2. Enter the amount to convert and press the Ok  
soft key or key.  
The amount you entered and its equivalent  
value display.  
3. Press the Exit soft key to exit the currency  
convertor.  
121  
   
Network services  
These menu functions are network services. Please  
contact your service provider to check their  
availability and then subscribe to them, if you wish.  
Call diverting (Menu 6.1)  
This network service enables incoming calls to be  
rerouted to a number that you specify.  
Example: You may wish to divert your business calls  
to a colleague while you are on holiday.  
To set your call diverting options:  
1. Select a call diverting option by pressing the Up  
or Down key, and then press the Select soft key  
or  
key.  
The following options are available:  
Divert always: all calls are diverted.  
Busy: calls are diverted when you are already  
on another call.  
No reply: calls are diverted when you do not  
answer the phone.  
Unreachable: calls are diverted when you are  
not in an area covered by your service  
provider or when your phone is switched off.  
Cancel all: all call diverting options are  
cancelled.  
122  
         
Network services  
2. Select the type of calls, voice or data, by  
pressing the Up or Down key, and then press the  
Select soft key or key.  
The current status displays. If the option has  
already been set, the number to which the calls  
are diverted displays.  
3. To  
Press the  
activate call  
diverting  
Activate soft key. Go to  
step 4.  
change the number  
to be called  
key. Go to step 4.  
deactivate call  
diverting  
Remove soft key.  
4. Enter the number to which the calls are to be  
diverted and press the Ok soft key or  
key.  
To enter an international code, press the  
0
key  
until the  
+
sign displays.  
5. If you selected No reply in step 1, select the  
length of time the network waits before diverting  
a call and press the Select soft key or  
key.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
123  
Network services  
Call barring (Menu 6.2)  
The call barring network service allows you to  
restrict your calls.  
To set your call barring options:  
1. Select a call barring option by pressing the Up or  
Down key, and then press the Select soft key or  
key.  
The following options are available:  
All outgoing: calls cannot be made.  
International: international calls cannot be  
made.  
International except to home: when  
abroad, calls can be made only to numbers  
within the current country and to your home  
country, which is the country where your home  
network provider is located.  
All incoming: calls cannot be received.  
Incoming while abroad: calls cannot be  
received when you are using your phone  
outside of your home service area.  
Cancel all: all call barring settings are  
deactivated; calls can be made and received  
normally.  
Change barring password: you can set and  
change the call barring password obtained  
from your service provider using this option.  
2. Select the type of calls, voice or data, by  
pressing the Up or Down key, and then press the  
Select soft key or  
key.  
3. Press the Activate soft key to confirm your  
settings.  
124  
       
Network services  
4. Enter your call barring password supplied by  
your service provider.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
To deactivate specific call barring settings:  
1. Select the call barring option to be deactivated.  
2. Select the type of calls to which this option  
applies.  
3. Press the Deactivate soft key.  
4. Enter your call barring password supplied by  
your service provider.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
Call waiting (Menu 6.3)  
This network service informs you when someone is  
trying to reach you during another call.  
You can specify individual call waiting options for  
voice calls and/or data calls.  
To set your call waiting options:  
1. Select the type of calls, voice or data, to which  
you want to apply the call waiting option by  
pressing the Up or Down key, and then press the  
Select soft key or  
key.  
The screen informs you whether call waiting is  
activated or deactivated.  
125  
   
Network services  
2. You can activate or deactivate the call waiting  
feature as necessary by using the Activate or  
Deactivate soft key respectively.  
To return to the previous screen, press the Exit  
soft key.  
You can also deactivate all call waiting settings by  
selecting the Cancel all option.  
Network selection (Menu 6.4)  
The Network Selection feature enables you to  
automatically or manually select the network used  
when roaming outside of your home area.  
Note: You can select a network other than your home  
network only if there is a valid roaming  
agreement between the two.  
To automatically or manually select the network to  
be used when roaming:  
1. Press the Up or Down key until the appropriate  
option highlights and then press the Ok soft key  
or  
key.  
If you select Automatic, you are connected to  
the first available network when roaming.  
If you select Manual, go to step 2.  
2. Press the Up or Down key until the network you  
want highlights and then press the Ok soft key  
or  
key.  
The phone will scan for that network and you  
will be connected.  
126  
     
Network services  
Caller ID (Menu 6.5)  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Note: Some networks do not allow the user to change  
this setting.  
The following options are available:  
Default: the default setting provided by the  
network is used.  
Hide number: your number does not display on  
the other person’s phone.  
Send number: your number is sent each time you  
make a call.  
Closed user group (CUG) (Menu 6.6)  
This network service allows incoming and outgoing  
calls to be restricted to a selected user group. You  
can create up to ten user groups.  
For details about how to create and use a closed  
user group, contact your service provider.  
Example: A company lends SIM cards to its  
employees and wants to restrict outgoing  
calls to members of the same team.  
Activating a closed user group  
If you select the Closed user group menu, you  
can enter the CUG function. You can access the  
following options after pressing the Select soft key  
or  
key:  
127  
       
Network services  
Index list: lets you list, add or delete CUG index  
numbers. The list of current CUG indexes appears.  
Add a new CUG index as advised by your service  
provider or delete a group.  
To  
Press the  
scroll through  
existing CUG  
indexes  
Up or Down key.  
add a new CUG  
index  
Options soft key or  
select the Add option and  
key,  
enter the index.  
delete a CUG  
index  
Options soft key or key and  
select the Delete option.  
activate a CUG  
index  
Options soft key or key and  
select the Activate option.  
Outside access: lets you enable or disable calls to  
numbers other than those in the Closed User Group.  
This feature depends on the nature of your CUG  
subscription. Please check with your service  
provider.  
Default group: you may set a default CUG with  
your service provider. If you have done so, you can  
enable the Default group option on your phone.  
When making a call, you are given the option of  
using your default CUG, instead of selecting one  
from the list.  
Deactivate: deactivates the CUG function. This  
menu appears only when the default group is  
enabled or a CUG index is selected.  
128  
Funbox  
The Funbox menu contains several fun options.  
WAP browser (Menu 7.1)  
Your phone is equipped with a WAP (Wireless  
Application Protocol) browser to allow you to access  
and navigate the Wireless Web using your phone.  
Home (Menu 7.1.1)  
Selecting this menu connects the phone to the  
network and loads the homepage of the Wireless  
Web service provider. You can also press the  
in Idle mode to launch the browser.  
key  
The contents of the WAP Browser startup homepage  
depends on your Wireless Web service provider. To  
scroll through the screen, use the Up or Down key.  
Note: To go to the startup homepage from any other  
screen in the WAP browser, use the Home  
option. For further details about the WAP  
Browser menus, see page 131.  
Exiting the WAP browser  
To exit the browser at any time, simply press and  
hold the  
key.  
129  
           
Funbox  
Navigating the WAP browse  
r
To  
Press the  
scroll through  
browser items  
Up or Down key.  
select a browser  
item  
Options soft key and choose  
the Select option.  
return to the  
previous page  
C key, or press the Options  
soft key and then select  
Back.  
return to the  
Menu soft key and select the  
startup homepage Home option. For further  
details about this option, see  
page 131.  
Entering text in the WAP browser  
When you are prompted to enter text, the currently  
active text input mode is indicated on the screen. To  
change the text input mode, press the key one or  
more times.  
The following modes are available:  
Upper-case character mode  
(A): allows you to  
enter upper-case English characters.  
Lower-case character mode ): allows you to  
enter lower-case English characters.  
T9 mode T9): allows you to enter English  
characters by pressing one key per letter. In this  
mode, you can use only the key to display  
(a  
(
0
alternative words. To change the case, press the  
key.  
Number mode  
(1): allows you to enter numbers.  
130  
Funbox  
Selecting and using browser menu options  
Various menu options are available when you are  
using the WAP Browser to navigate the Wireless  
Web.  
To access a menu option:  
1. Press the Menu soft key.  
A menu list displays.  
2. Highlight a menu by pressing the Up or Down  
key.  
3. Select an option by pressing the key or Select  
soft key.  
4. If necessary, select a secondary option using the  
Up or Down key, and press the  
soft key to confirm.  
key or Select  
Note: The menus may vary, depending on your  
version of the WAP browser.  
The following options are available:  
Bookmarks: shows the bookmarks list. You can  
bookmark the current web page or access  
previously bookmarked pages.  
Reload: reloads the current page.  
Home: takes you back at any time to the home  
page of the Wireless Web service provider.  
Goto URL: allows you to manually enter the URL  
address of a Web page. After entering an address,  
press the Ok soft key to go there directly.  
Show URL: displays the URL address of the Web  
page to which you are currently connected. It also  
enables you to set the current site as the startup  
home page.  
131  
 
Funbox  
Clear cache: deletes the information stored in the  
cache, which stores the most recently accessed  
Web pages.  
Security info: shows security information when  
you access the wireless web with the secured WAP  
setting activated.  
Inbox: allows you to read messages received from  
a web server.  
Show images: shows the image on the current  
web page in order. Press the Next soft key or key  
to view the next images.  
Bookmarks (Menu 7.1.2)  
This menu allows you to store the URL addresses of  
up to 16 of your favourite web sites.  
To store a URL address:  
1. Select an empty location and press the Options  
soft key or  
key.  
2. Enter the address and press the Ok soft key or  
keys.  
For further details about how to enter  
characters, see page 46.  
3. Enter a name for the item and press the Ok soft  
key or  
key.  
After saving an item, you can access the following  
options by pressing the Options soft key or  
Go to URL: quickly takes you to the site.  
Edit: allows you to edit the address and name.  
Delete: allows you to delete the address.  
key:  
132  
 
Funbox  
http:// (Menu 7.1.3)  
This menu allows you to manually enter the URL  
address of a Web site that you wish to access.  
For further details about how to enter characters,  
see page 46.  
WAP profile (Menu 7.1.4)  
This menu allows you to set up five proxy servers  
for the WAP browser. Contact your service provider  
for details about your WAP Profile options.  
For each server, the following options are available:  
Profile name: enter a name that you wish to  
assign to the HTTP server.  
Homepage URL: set the address of your startup  
homepage. When the default homepage displays,  
you can delete it using the  
own choice.  
C
key and enter your  
Security: select a data transmission mode. Choose  
Secure to protect your data against unauthorised  
access; otherwise, choose Non-Secure  
.
Bearer: select a bearer to be used for each type of  
network address accessed; GPRS or Data.The  
remaining options depend on the Bearer setting.  
When the bearer is set to GPRS  
:
IP address: enter the WAP gateway address  
required to connect to the Internet.  
User name: enter the User ID required to connect  
to the GPRS network.  
Password: enter the password required to connect  
to the GPRS network.  
133  
Funbox  
APN: enter the access point name used for the  
address of the GPRS network gateway.  
When the bearer is set to Data  
:
IP address: enter the WAP gateway address  
required to connect to the Internet.  
Login name: enter the PPP server login ID.  
Password: enter the PPP server password.  
Dial-Up number: enter the PPP server phone  
number.  
Data call type: select a data call type; Analogue  
or ISDN  
.
Note: The WAP browser settings may vary, depending  
on the service provider. Contact your service  
provider for further details.  
Clear cache (Menu 7.1.5)  
You can clear the information stored in the cache,  
the phone’s temporary memory in which the most  
recently accessed Web pages are stored.  
Press the Yes soft key or  
key to confirm the  
deletion. Otherwise, press the No soft key.  
134  
 
Funbox  
Games (Menu 7.2)  
You can download MIDlets (Java applications that  
run on mobile phones) from various sources using  
the WAP Browser, and store them in your phone.  
Note: Java services may not be available, depending  
on your service provider.  
When you access the Games menu, the list of the  
default games appears. Once you have downloaded  
games, they are added to the list.  
Launching a MIDlet  
Note: The procedure explained below is for the  
default games. For downloaded games, the  
procedure may be different.  
1. Scroll to the MIDlet you want on the games list  
and press the  
key.  
2. On the startup screen of the MIDlet, scroll to an  
option using the Navigation keys.  
The following options are available:  
START GAME: starts a new game.  
CONTINUE: allows you to continue the last  
game you played.  
HIGH SCORE: shows the high score table.  
This option may not be available for some  
games.  
HOW TO PLAY: shows how to play the game  
and the key functions for the game.  
OPTION: allows you to switch on or off the  
game sound.  
135  
       
Funbox  
3. Press the  
selection.  
5
key or  
key to confirm your  
While you are playing a  
game, to  
Press the  
adjust the sound volume  
Volume keys.  
stop the game and return  
to the startup screen  
C
key.  
exit the game  
key.  
Viewing MIDlet information  
1. Scroll to the MIDlet you want and press the Info  
soft key.  
The display shows information about the MIDlet,  
such as the file size, application version, and its  
vendor.  
2. To scroll to other MIDlet information, press the  
Left and Right keys.  
3. If you want to delete the MIDlet, press the  
Delete soft key and then press the Yes soft key  
to confirm the deletion.  
Note: When you select default games from the  
list, the Delete option is not available.  
4. To exit and return to the games list, press the  
soft key or the  
C
key.  
136  
Funbox  
Entering text  
If you need to enter text while using a MIDlet, you  
can use the following input modes:  
Upper-case character mode  
(A): allows you to  
enter upper-case English characters.  
Lower-case character mode ): allows you to  
enter lower-case English characters.  
Number mode ): allows you to enter numbers.  
(a  
(1  
Symbol mode: allows you to enter symbols. After  
highlighting a symbol by pressing the Navigation  
keys, press the  
T9 mode T9): allows you to enter English  
characters by pressing one key per letter. In this  
key to insert it.  
(
mode, you can change the case by pressing the  
key.  
0
To change the text input mode, press the  
key  
until the appropriate indicator appears on the soft  
key area of the display.  
Changing the DNS settings  
The DNS (Domain Name Server) is the server that  
assigns the Java server domain name to an IP  
address. The DNS setting is preset at the factory,  
but sometimes you may need to change it at your  
service provider’s instructions.  
1. Scroll to Setting on the games list and press  
the Select soft key or  
key.  
2. Enter the primary address using the number  
keypad and press the Ok soft key or key.  
3. Enter the secondary address and press the Ok  
soft key or key.  
137  
 
Funbox  
Sounds (Menu 7.3)  
In this menu, you can view the list of sounds  
downloaded or received in multimedia messages.  
You can set the downloaded sounds as the current  
ring tone or send them to other phones.  
Scroll to the sound you want and press the Play  
soft key or  
key.  
By pressing the Options soft key or key, you can  
access the following options:  
Rename: allows you to change the name of the  
sound.  
Delete: deletes the sound.  
Set as ring tone: sets the sound as your ring tone.  
Images (Menu 7.4)  
In this menu, you can view the list of images  
downloaded or received in messages. You can set  
the downloaded images as the current background  
image or send them to other phones.  
Scroll to the image you want to view and press the  
View soft key or  
key.  
By pressing the Options soft key or key, you can  
access the following options:  
Rename: allows you to change the name of the  
image.  
Delete: deletes the image.  
Set as wallpaper: sets the image as your  
wallpaper for the idle screen.  
138  
       
Funbox  
Delete all (Menu 7.5)  
This menu allows you to delete all of the  
downloaded items in the Games, Sounds, and  
Images folders separately. You can delete all of the  
items at one time.  
1. To  
select a folder to  
Press the  
Up or Down key. To  
clear  
delete all of your items,  
select All  
.
place or remove a  
check mark  
key.  
2. Press the Delete soft key to delete the marked  
items.  
3. When a confirmation message displays, press  
the Yes soft key or  
key to confirm.  
4. When the phone asks for confirmation again,  
press the Yes soft key or key.  
139  
 
Funbox  
Memory status (Menu 7.6)  
You can check the amount of memory being used  
and the memory remaining for games or sounds  
and images.  
Games: When you select this option, you can view  
the Total, Used, and Free memory, and also the  
number of games you have downloaded. Press the  
Up or Down key to scroll through the screen.  
Sounds & Images: When you select this option,  
you can view the Total, Used, and Free memory,  
including each space used for sounds and images.  
Press the Up or Down key to scroll through the  
screen.  
140  
   
SIM AT  
This menu is available if you use a SIM AT card that  
provides additional services, such as news, weather,  
sports, entertainment, and location services.  
Available services may vary, depending on your  
service provider’s plans.  
For further details, see your SIM card instructions  
or contact your service provider.  
141  
   
Solving problems  
If you are experiencing problems with your phone,  
perform the following simple checks, before  
contacting a service professional. This may save  
you the time and expense of an unnecessary  
service call.  
When you switch your phone on, the  
following messages may appear:  
Insert SIM card  
• Check that the SIM card is correctly installed.  
Phone locked enter password  
• The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
Enter PIN  
• You are using your phone for the first time. You  
must enter the Personal Identification Number  
(PIN) supplied with the SIM card.  
• The PIN Check feature is enabled. Every time the  
phone is switched on, the PIN has to be entered.  
To disable this feature, use the PIN check menu  
(Menu 4.6.1).  
Enter PUK  
• The PIN code was entered incorrectly three times  
in succession and the phone is now blocked.  
Enter the PUK supplied by your service provider.  
142  
   
Solving problems  
“No service,” “Network failure” or “Not  
done” displays  
• The network connection was lost. You may be in a  
weak signal area (in a tunnel or surrounded by  
buildings). Move and try again.  
• You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
You have entered a number but it was  
not dialled  
• Have you pressed the  
key?  
• Are you accessing the right cellular network?  
• You may have set an outgoing call barring option.  
Your correspondent cannot reach you  
• Is your phone switched on (the  
for more than one second)?  
key pressed  
• Are you accessing the right cellular network?  
• You may have set an incoming call barring option.  
Your correspondent cannot hear you  
speaking  
• Have you switched off the microphone?  
• Are you holding the phone close enough to your  
mouth? The microphone is located at the bottom  
of the phone.  
143  
Solving problems  
The phone starts beeping and  
“**Warning** Low Battery” flashes on  
the display  
• Your battery is insufficiently charged. Recharge  
the battery.  
The audio quality of the call is poor  
• Check the signal strength indicator on the display  
(
); the number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
Try moving the phone slightly or moving closer to  
a window if you are in a building.  
No number is dialled when you recall a  
Phonebook entry  
• Check that the number has been stored correctly,  
by using the Phonebook Search feature.  
• Re-store the number, if necessary.  
If the above guidelines do not help you to solve  
the problem, take note of:  
• the model and serial numbers of your phone  
• your warranty details  
• a clear description of the problem  
Then contact your local dealer or Samsung after-  
sales service.  
144  
Access codes  
There are several access codes that are used by  
your phone and its SIM card. These codes help you  
protect the phone against unauthorised use.  
When requested for any of the codes explained  
below, enter the appropriate code (displayed as  
asterisks) and press the Ok soft key or  
key. If  
you make a mistake, press the key one or more  
C
times until the incorrect digit is cleared and then  
continue entering the correct code.  
The access codes, except for the PUK and PUK2  
codes, can be changed using the Security menu  
(Menu 4.6). See page 105 for further details.  
Important! Avoid using access codes resembling  
emergency numbers, such as 112, so  
that you do not accidentally dial an  
emergency number.  
Phone password  
The Phone Lock feature uses the phone password to  
protect your phone against unauthorised use. The  
phone password is supplied with the phone and is  
preset to “00000000” at the factory.  
To  
See  
activate/deactivate the page 106 (Menu 4.6.3).  
Phone Lock feature  
change the phone  
password  
page 106 (Menu 4.6.4).  
145  
       
Access codes  
PIN  
The  
Personal  
Identification  
Number or PIN (4 to  
8 digits) protects your SIM card against  
unauthorised use. It is usually supplied with the  
SIM card.  
If you enter an incorrect PIN three times in  
succession, the code is disabled and cannot be used  
until you re-enable it by entering the PUK (see  
below).  
To  
See  
activate/deactivate the page 105 (Menu 4.6.1).  
PIN Check feature  
change the PIN  
page 106 (Menu 4.6.2).  
PUK  
The 8-digit PUK (  
PIN  
Unblocking  
Key) is required to  
change a disabled PIN. The PUK may be supplied  
with the SIM card. If not, or if you have lost it,  
contact your service provider.  
To re-enable your PIN:  
1. Enter the PUK and press the Ok soft key or  
key.  
2. Enter a new PIN of your choice and press the Ok  
soft key or  
key.  
3. When the Confirm New PIN message displays,  
enter the same code again and press the Ok soft  
key or  
key.  
If you enter an incorrect PUK ten times in  
succession, the SIM card becomes invalid. Contact  
your service provider for a new card.  
146  
       
Access codes  
PIN2  
The PIN2 (4 to 8 digits), supplied with some SIM  
cards, is required to access specific functions, such  
as setting the maximum cost of a call. These  
functions are available if supported by your SIM  
card.  
If you enter an incorrect PIN2 three times in  
succession, the code is disabled and you cannot  
access the functions until you re-enable it by  
entering the PUK2.  
To change the PIN2, see page 108 (Menu 4.6.8).  
PUK2  
The 8-digit PUK2 (  
PIN  
Unblocking  
Key  
2), supplied  
with some SIM cards, is required to change a  
disabled PIN2. If you lose the code, contact your  
service provider.  
To re-enable your PIN2:  
1. Enter the PUK2 and press the Ok soft key or  
key.  
2. Enter a new PIN2 of your choice and press the  
Ok soft key or  
key.  
3. When the Confirm PIN2 message displays,  
enter the same code again and press the Ok soft  
key or  
key.  
If you enter an incorrect PUK2 ten times in  
succession, you will not be able to access the  
functions requiring the PIN2. Contact your service  
provider for a new card.  
147  
       
Access codes  
Barring password  
A 4-digit barring password is required when you use  
the Call Barring function. You can obtain the  
password from your service provider when you  
subscribe to this function.  
You can change this password in the Call barring  
menu (Menu 6.2). See page 124 for further  
details.  
148  
   
Health and safety  
information  
SAR certification information  
This phone meets European Union (EU)  
requirements concerning exposure to radio waves.  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured so as not  
to exceed the limits for exposure to radio-frequency  
(RF) energy, as recommended by the EU Council.  
These limits are part of comprehensive guidelines  
and establish permitted levels of RF energy for the  
general population. The guidelines were developed  
by independent scientific organisations through the  
periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety  
margin designed to ensure the safety of all persons,  
regardless of age and health.  
The exposure standard for mobile phones employs  
a unit of measurement known as SAR (Specific  
Absorption Rate). The SAR limit recommended by  
the EU Council is 2.0W/kg.*  
The highest SAR value for this model phone was  
0.933 w/kg.  
* The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body  
tissue. The limit incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements. The SAR values may vary,  
depending on national reporting requirements and the  
network band.  
149  
     
Health and safety information  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as  
to use only the power required to reach the  
network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Before a new model phone is available for sale to  
the public, compliance with the European R&TTE  
Directive must be shown. This directive includes as  
one of its essential requirements the protection of  
the health and safety of the user and any other  
person.  
Precautions when using batteries  
• Never use any charger or battery that is damaged  
in any way.  
• Use the battery only for its intended purpose.  
• If you use the phone near the network’s base  
station, it uses less power; talk and standby time  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
• Battery charging time depends on the remaining  
battery charge, the type of battery and the  
charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal,  
it is time to buy a new battery.  
150  
   
Health and safety information  
• If left unused, a fully charged battery will  
discharge itself over time.  
• Use only Samsung-approved batteries and  
recharge your battery only with Samsung-  
approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave  
the battery connected to a charger for more than  
a week, since overcharging may shorten its life.  
• Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
• Do not leave the battery in hot or cold places,  
such as in a car in summer or winter conditions,  
as you will reduce the capacity and lifetime of the  
battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
• Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and – terminals of the battery (metal strips  
on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting  
the terminals may damage the battery or the  
object causing the short-circuiting.  
• Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
151  
Health and safety information  
Road safety  
Your wireless phone gives you the powerful ability  
to communicate by voice, almost anywhere,  
anytime. But an important responsibility  
accompanies the benefits of wireless phones, one  
that every user must uphold.  
When driving a car, driving is your first  
responsibility. When using your wireless phone  
behind the wheel of a car, make sure that you are  
following the special regulations in a given area or  
country.  
Operating environment  
Remember to follow any special regulations in force  
in any area and always switch your phone off  
whenever it is forbidden to use it, or when it may  
cause interference or danger.  
When connecting the phone or any accessory to  
another device, read its user’s guide for detailed  
safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation  
of the equipment and for the safety of personnel, it  
is recommended that the equipment should only be  
used in the normal operating position (held to your  
ear with the antenna pointing over your shoulder).  
152  
     
Health and safety information  
Electronic devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against  
the RF signals from your wireless phone. Consult  
the manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent  
with the independent research and  
recommendations of Wireless Technology Research.  
Persons with pacemakers:  
• Should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the phone  
is switched on  
• Should not carry the phone in a breast pocket  
• Should use the ear opposite the pacemaker to  
minimise potential interference  
If you have any reason to suspect that interference  
is taking place, switch your phone off immediately.  
Hearing aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
interference, you may wish to consult your hearing  
aid manufacturer to discuss alternatives.  
153  
 
Health and safety information  
Other medical devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
determine if it is adequately shielded from external  
RF energy. Your physician may be able to assist you  
in obtaining this information. Switch your phone off  
in health care facilities when any regulations posted  
in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Posted facilities  
Switch your phone off in any facility where posted  
notices require you to do so.  
154  
Health and safety information  
Potentially explosive environments  
Switch your phone off when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even  
death.  
Users are advised to switch the phone off while at a  
refuelling point (service station). Users are  
reminded of the need to observe restrictions on the  
use of radio equipment in fuel depots (fuel storage  
and distribution areas), chemical plants or where  
blasting operations are in progress.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
the areas below decks on boats, chemical transfer  
or storage facilities, vehicles using liquefied  
petroleum gas, such as propane or butane, areas  
where the air contains chemicals or particles, such  
as grain, dust or metal powders, and any other area  
where you would normally be advised to turn off  
your vehicle engine.  
155  
 
Health and safety information  
Emergency calls  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks as well  
as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore,  
you should never rely solely on any wireless phone  
for essential communications (medical  
emergencies, for example).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may not  
be possible on all wireless phone networks or when  
certain network services and/or phone features are  
in use. Check with local service providers.  
To make an emergency call, proceed as follows.  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present  
location (for example, 112 or any other official  
emergency number). Emergency numbers vary  
by location.  
3. Press the  
key.  
If certain features are in use (call barring, for  
example), you may first need to deactivate those  
features before you can make an emergency call.  
Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give  
all the necessary information as accurately as  
possible. Remember that your phone may be the  
only means of communication at the scene of an  
accident; do not cut off the call until given  
permission to do so.  
156  
   
Health and safety information  
Other important safety information  
• Only qualified personnel should service the phone  
or install the phone in a vehicle. Faulty  
installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
• Check regularly that all wireless phone equipment  
in your vehicle is mounted and operating  
properly.  
• Do not store or carry flammable liquids, gases or  
explosive materials in the same compartment as  
the phone, its parts or accessories.  
• For vehicles equipped with an air bag, remember  
that an air bag inflates with great force. Do not  
place objects, including both installed or portable  
wireless equipment in the area over the air bag or  
in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag  
inflates, serious injury could result.  
• Switch your phone off before boarding an aircraft.  
The use of wireless phones in an aircraft may be  
dangerous to the operation of the aircraft, and is  
illegal.  
• Failure to observe these instructions may lead to  
the suspension or denial of telephone services to  
the offender, or legal action, or both.  
157  
 
Health and safety information  
Care and maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for  
many years.  
• Keep the phone and all its parts and accessories  
out of the reach of small children.  
• Keep the phone dry. Precipitation, humidity and  
liquids contain minerals that corrode electronic  
circuits.  
• Do not use the phone with a wet hand. Doing so  
may cause an electric shock to you or damage to  
the phone.  
• Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
• Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
• Do not store the phone in cold areas. When the  
phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s electronic  
circuit boards.  
• Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
• Do not use harsh chemicals, cleaning solvents or  
strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
158  
   
Health and safety information  
• Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
• Do not put the phone in or on heating devices,  
such as a microwave oven, a stove or a radiator.  
The phone may explode when overheated.  
• Use only the supplied or an approved  
replacement antenna. Unauthorised antennas or  
modified accessories may damage the phone and  
violate regulations governing radio devices.  
• If the phone, battery, charger or any accessory is  
not working properly, take it to your nearest  
qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
159  
Glossary  
To help you understand the main technical terms  
and abbreviations used in this booklet, and to take  
full advantage of the features of your mobile phone,  
here are a few definitions:  
Call barring  
Ability to restrict outgoing and incoming calls.  
Call diverting  
Ability to reroute calls to another number.  
Call holding  
Ability to put one call on standby while answering or  
making another call; you can then switch between  
the two calls, as required.  
Call waiting  
Informs you that you have an incoming call when  
you are engaged on another call.  
Caller line identification services (Caller ID)  
Services allowing subscribers to view or block the  
telephone numbers of callers.  
Dual band  
Ability to operate with both DCS (1800 Mhz) and  
GSM (900 Mhz) networks. The phone automatically  
uses the network with the strongest signal and even  
switches networks during a call within the same  
operator’s network.  
160  
 
Glossary  
EMS (Enhanced Message Service)  
An adaptation of the Short Message Service (SMS)  
that allows you to send and receive ring tones and  
the service provider’s logo, as well as combinations  
of simple media to and from EMS-compliant  
handsets. Because EMS is based on SMS, it can use  
SMS centres the same way that SMS does. EMS  
works on all Global System for Mobile  
communications (GSM) networks. EMS senders can  
use text, melodies, photos, sounds, and animations  
to enhance the expressive power of messages that  
are limited by the display constraints of mobile  
devices.  
GPRS (General Packet Radio Service)  
New non-voice value-added service that allows  
information to be sent and received across a mobile  
telephone network. GPRS provides continuous  
connection to the Internet for mobile phone and  
computer users. It is based on the Global System  
for Mobile Communication (GSM) circuit-switched  
cellular phone connections and the Short Message  
Service (SMS).  
GSM (Global System for Mobile  
Communication)  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
161  
Glossary  
Java  
Programming language generating applications that  
can run on all hardware platforms, whether small,  
medium or large, without modification. It has been  
promoted for and geared heavily to the Web, both  
for public Web sites and Intranets. When a Java  
program runs from a Web page, it is called a Java  
applet. When it is run on a mobile phone or pager, it  
is called a MIDlet.  
MMS (Multimedia Message Service)  
A message service for the mobile environment,  
standardized by the WAP Forum and the 3rd  
Generation Partnership Program (3GPP). For phone  
users, MMS is similar to Short Message Service  
(SMS)-it provides automatic, immediate delivery of  
user-created content from phone to phone. The  
message addressing used is primarily phone  
numbers, thus the traffic goes from phone to  
phone. MMS also provides support for e-mail  
addressing, so that messages can be sent by e-  
mail. In addition to the text content of SMS, MMS  
messages can contain still images, voice or audio  
clips, and also video clips and presentation  
information.  
Multi-party calling  
Ability to establish a conference call involving up to  
five additional parties.  
Phone password  
Security code used to unlock the phone when you  
have selected the option to lock it automatically  
each time it switches on.  
162  
Glossary  
PIN (Personal Identification Number)  
Security code that protects the phone against  
unauthorised use. The PIN is supplied by the  
service provider with the SIM card. It may be a four  
to eight-digit number and can be changed, as  
required.  
Proxy server  
A proxy server resides between a Web client, such  
as a web browser, and a real Web server and acts  
as an intermediary between them. When some  
people browse a web site, their browser is not  
actually connecting to the web server. The request  
from their browser goes to a proxy server, and the  
proxy server makes the request to the web server.  
A proxy server can improve performance for groups  
of users because it caches the results of all requests  
for a certain amount of time. If a user requests a  
web page that it already loaded for another user, it  
reloads the page instead of forwarding the request  
to the Web server, which can be a time-consuming  
operation.  
PUK (PIN Unblocking Key)  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
Roaming  
Use of your phone when you are outside your home  
area (when travelling for example).  
163  
Glossary  
SDN (Service Dialling Numbers)  
Telephone numbers supplied by your network  
provider and giving access to special services, such  
as voice mail, directory inquiries, customer support  
and emergency services.  
SIM (Subscriber Identification Module)  
Card containing a chip with all the information  
required to operate the phone (network and  
memory information, as well as the subscriber’s  
personal data). The SIM card fits into a small slot  
on the back of the phone and is protected by the  
battery.  
SMS (Short Message Service)  
Network service sending and receiving messages to  
and from another subscriber without having to  
speak to the correspondent. The message created  
or received can be displayed, received, edited or  
sent.  
Soft keys  
Two keys marke  
d
and  
on the phone, the  
purpose of which:  
• varies according to the function that you are  
currently using.  
• is indicated on the bottom line of the display just  
above the corresponding key.  
Voice mail  
Computerised answering service that automatically  
answers your calls when you are not available,  
plays a greeting (optionally in your own voice) and  
records a message.  
164  
Index  
Caller ID • 127  
Calls  
A
Access codes • 145  
Alarm • 111  
answering • 26  
barring • 124  
diverting • 122  
ending • 24  
holding • 52  
making • 23  
redialling • 24  
rejecting • 26  
Alert type • 97  
Alphabet mode, text input •  
50  
Answering  
call • 26  
second call • 57  
Anykey answer • 109  
Auto key lock • 103  
Auto redial • 109  
waiting • 57  
CB(CellBroadcast)messages  
89  
,
Characters, enter • 46  
Charging battery • 19  
Closed User Group (CUG) •  
127  
B
Background image • 102  
Backlight  
description • 15  
time, set • 103  
Barring, calls • 124  
Battery  
Conference call • 57  
Connect tone • 100  
Cost, calls • 95  
Currency exchange 121  
charging • 19  
D
installing • 18  
low indicator • 20  
precautions • 150  
removing • 17  
Date, set • 115  
Deleting  
calendar memo • 115  
call record • 91  
multimedia message •  
Broadcast messages • 89  
Browser, WAP • 129  
81, 83  
phonebook • 36  
task • 118  
C
Calculator • 116  
Calendar memos  
copying • 115  
deleting • 115  
viewing • 114  
writing • 113  
Call back, message • 71  
Call costs • 95  
Call records  
text message • 70  
,
72  
voice memo • 120  
Delivery reports, message •  
74  
Dialled calls • 92  
Display  
backlight • 15  
icons • 14  
layout • 13  
dialled • 92  
settings • 102  
Diverting, calls • 122  
DNS settings • 137  
DTMF tones, send • 55  
missed • 27 91  
,
received • 92  
Call time • 94  
Caller groups  
editing • 42  
searching • 41  
165  
 
Index  
location • 10  
locking • 22  
E
,
103  
Earpiece volume • 25  
Emergency calls • 156  
EMS (Enhanced Message  
Service) • 67  
L
Language, select • 105  
Last number, redial 24  
Locking  
Error tone • 100  
keys • 22 103  
,
F
media contents 107  
phone • 106  
SIM card • 107  
FDN (Fixed Dial Number)  
mode • 108  
Funbox • 129  
Low battery indicator • 20  
G
M
Games • 135  
Memory status  
downloaded items • 140  
multimedia messages •  
90  
Graphic logo • 104  
Greeting message • 104  
phonebook • 44  
text messages • 90  
Menus  
H
Health and safety • 149  
Holding, call • 52  
accessing • 60  
list • 62  
Message tone • 97  
Messages  
I
Icons, description • 14  
Images, downloaded • 138  
Inbox, messages  
multimedia • 79  
text • 70  
cell broadcast • 89  
greeting • 104  
multimedia • 75  
text • 67  
voice • 88  
web • 87  
web 87  
Infrared, connect • 101  
International calls • 23  
Internet • 129  
MIDlets, launch • 135  
Minute minder • 100  
Missed calls • 27 91  
,
MMS (Multimedia messages  
Service) • 75  
Morning call • 111  
Multimedia messages  
creating/sending • 75  
J
Java service • 135  
deleting • 81  
,
83  
K
editing • 83  
Key volume • 25  
Keypad tones  
sending • 55  
Keys  
reading • 79  
,
82  
setting • 84  
Multi-party calls • 57  
auto lock • 103  
description • 11  
166  
Index  
Muting  
searching/dialling • 40  
all sounds • 29  
speed-dialling • 37  
,
38  
key tones • 55  
storing • 33  
microphone • 54  
PIN  
changing • 106  
description • 146  
N
Names  
PIN2  
changing • 108  
description • 147  
Privacy • 107  
Problems, solve • 142  
PUK • 146  
entering • 46  
searching/dialling • 40  
Network selection • 126  
Network services • 122  
Numbers, phone  
PUK2 • 147  
Push messages • 87  
searching/dialling • 40  
storing • 33  
R
O
Received calls • 92  
Received messages  
multimedia • 79  
text • 70  
On/off switch, phone • 21  
Organiser • 111  
Outbox, messages  
multimedia • 82  
text • 71  
Recording  
voice memos • 119  
Own number • 104  
Redialling  
automatically • 109  
manually • 24  
Resetting phone • 110  
Ring tone • 96  
Ring type • 97  
Ring volume • 96  
Road safety • 152  
Roaming • 126  
P
Password  
call barring • 124  
phone • 106 145  
Phone  
,
148  
,
care and maintenance •  
158  
display • 13  
icons • 14  
S
keys • 11  
Safety  
layout • 10  
information • 149  
locking • 106  
password • 145  
resetting • 110  
switching on/off • 21  
precautions •  
Scheduler • 113  
SDN (Service Dialling  
Numbers) • 44  
7
unpacking •  
Phonebook  
9
Searching, phonebook • 40  
Security, calls • 105  
Sent messages  
copying • 36  
deleting • 36  
editing • 36  
options • 36  
,
43  
multimedia • 82  
text • 71  
Service light • 16 103  
,
167  
Index  
Silent mode • 29  
SIM card  
U
Unlocking keypad • 22  
User group • 127  
,
103  
installing • 17  
locking • 107  
SMS (Short Message Service)  
Inbox • 70  
Outbox • 71  
Soft keys • 30  
Sound settings • 96  
Sounds, downloaded • 138  
V
Vibration • 97  
Voice mail • 88  
Voice memo  
deleting • 120  
playing • 120  
recording • 119  
Volume, adjust  
earpiece • 25  
keypad tone • 25  
ring • 96  
Speed-dial • 37  
,
38  
Switching on/off  
microphone • 54  
phone • 21  
T
T9 mode, text input • 48  
Tasks, to do list  
creating • 117  
W
Waiting call • 125  
Wallpaper • 102  
WAP browser  
editing • 118  
Templates  
multimedia • 84  
text • 72  
access • 129  
cache, clear • 134  
favourite • 132  
Text input mode • 47  
Text message  
World time • 116  
creating/sending • 67  
Writing messages  
multimedia • 75  
text • 67  
deleting • 70  
,
72  
71  
reading • 70  
,
sending • 67  
setting • 73  
Text, enter • 46  
Time format • 116  
Time, set • 115  
To do list • 117  
Tone  
connect • 100  
error • 100  
keypad • 97  
message • 97  
minute minder • 100  
power on/off • 99  
ring • 96  
Travel adapter • 19  
168  
169  
 
170  
Declaration of Conformity (R&TTE)  
For the following product:  
GSM900/GSM1800 Dual band Digital  
Portable Cellular Telephone  
(Product description)  
SGH-X120  
(Model name)  
Manufactured at:  
Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City, Kyung Buk, Korea, 730-350  
*
(factory name, address )  
to which this declaration relates, is in conformity with the following  
standards and/or other normative documents.  
Safety  
EMC  
: EN 60950-1:2001  
: EN 301 489-01 v1.4.1 (2002-08)  
EN 301 489-07 v1.2.1 (2002-08)  
: EN 50360:2001  
SAR  
EN 50361:2001  
Network  
: EN 301 511 V9.0.2 (2003-03)  
We hereby declare that [all essential radio test suites have been carried out  
and that] the above named product is in conformity to all the essential  
requirements of Directive 1999/5/EC.  
The conformity assessment procedure referred to in Article 10 and detailed in  
Annex[IV] of Directive 1999/5/EC has been followed with the involvement of  
the following Notified Body(ies):  
BABT, Claremont House, 34 Molesey Road,  
Walton-on-Thames, KT12 4RQ, UK  
Identification mark: 168  
The technical documentation kept at:  
Samsung Electronics Euro QA Lab.  
which will be made available upon request.  
(Representative in the EU)  
Samsung Electronics Euro QA Lab.  
Blackbushe Business Park, Saxony Way,  
Yateley, Hampshire, GU46 6GG, UK  
2004. 06. 09  
Yong-Sang Park / S. Manager  
(place and date of issue)  
(name and signature of authorised person)  
* This is not the address of the Samsung Service Centre. For the address or the phone  
number of the Samsung Service Centre, see the warranty card or contact the retailer  
where you purchased your phone.  

West Bend COFFEE CENTER User Manual
Sunbeam 32863281 User Manual
Sony Ericsson Amber TM1515 User Manual
Sony CDX L450V User Manual
Seagate Momentus ST9120414AS User Manual
Seagate Constellation ST2000NM0001 User Manual
Samsung GH68 08186A User Manual
Philips AJ3125 User Manual
Panasonic SL CT680V User Manual
Nokia 8270 User Manual