* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
DUAL BAND
GSM TELEPHONE
SGH-T200
Printed in Korea
World Wide Web
Code No.: GH68-03376A
English. 11/2002. Rev. 1.0
Contents
Contents
Options During a Call. . . . . . . . . . . . . . 49
Putting a Call on Hold . . . . . . . . . . . . . . . 49
Switching the Microphone Off (Mute). . . . . 50
Muting/Sending Key Tones. . . . . . . . . . . . 51
Searching for a Number in the Phonebook . 51
Using the SMS Service . . . . . . . . . . . . . . 52
Answering a Second Call . . . . . . . . . . . . . 52
Making a Multiparty Call . . . . . . . . . . . . . 53
Phone Settings . . . . . . . . . . . . . . . . . . 76
Infrared Activate (Menu 4.1). . . . . . . . . . 76
My Settings (Menu 4.2) . . . . . . . . . . . . . 77
Greeting Message (Menu 4.3) . . . . . . . . . 78
Own Number (Menu 4.4) . . . . . . . . . . . . 79
Language (Menu 4.5). . . . . . . . . . . . . . . 79
Security (Menu 4.6). . . . . . . . . . . . . . . . 79
LCD Settings (Menu 4.7) . . . . . . . . . . . . 82
Extra Settings (Menu 4.8). . . . . . . . . . . . 84
Short Cut (Menu 4.9). . . . . . . . . . . . . . . 86
Reset Settings (Menu 4.10). . . . . . . . . . . 87
Using the Menus . . . . . . . . . . . . . . . . . 55
Accessing Menu Functions by Scrolling. . . . 55
Accessing Menu Functions by
Using Shortcuts . . . . . . . . . . . . . . . . . . . 56
List of Menu Functions . . . . . . . . . . . . . . 57
Organiser . . . . . . . . . . . . . . . . . . . . . . 88
Calendar (Menu 5.1) . . . . . . . . . . . . . . . 88
To Do List (Menu 5.2) . . . . . . . . . . . . . . 90
Time & Date (Menu 5.3). . . . . . . . . . . . . 93
Alarm (Menu 5.4) . . . . . . . . . . . . . . . . . 94
Calculator (Menu 5.5) . . . . . . . . . . . . . . 95
Currency Exchange (Menu 5.6) . . . . . . . . 96
Messages. . . . . . . . . . . . . . . . . . . . . . . 61
Read Messages (Menu 1.1) . . . . . . . . . . . 61
Write Messages (Menu 1.2). . . . . . . . . . . 62
Templates (Menu 1.3) . . . . . . . . . . . . . . 64
Setup (Menu 1.4) . . . . . . . . . . . . . . . . . 65
Broadcast (Menu 1.5) . . . . . . . . . . . . . . 66
Voice Mail (Menu 1.6) . . . . . . . . . . . . . . 67
My Contents (Menu 1.7). . . . . . . . . . . . . 68
Memory Status (Menu 1.8) . . . . . . . . . . . 68
Network Services. . . . . . . . . . . . . . . . . 97
Call Diverting (Menu 6.1) . . . . . . . . . . . . 97
Call Barring (Menu 6.2) . . . . . . . . . . . . . 99
Call Waiting (Menu 6.3) . . . . . . . . . . . . 101
Network Selection (Menu 6.4) . . . . . . . . 102
Caller ID (Menu 6.5) . . . . . . . . . . . . . . 103
Closed User Group (CUG) (Menu 6.6) . . . 103
Call Records. . . . . . . . . . . . . . . . . . . . . 69
Missed Calls (Menu 2.1) . . . . . . . . . . . . . 69
Received Calls (Menu 2.2) . . . . . . . . . . . 69
Dialled Calls (Menu 2.3) . . . . . . . . . . . . . 70
Call Time (Menu 2.4) . . . . . . . . . . . . . . . 70
Call Cost (Menu 2.5) . . . . . . . . . . . . . . . 71
Fun Box . . . . . . . . . . . . . . . . . . . . . . . 105
Games (Menu 7.1). . . . . . . . . . . . . . . . 105
WAP Browser (Menu 7.2) . . . . . . . . . . . 106
Downloads (Menu 7.3) . . . . . . . . . . . . . 112
Sound Settings . . . . . . . . . . . . . . . . . . 72
Ring Tone (Menu 3.1) . . . . . . . . . . . . . . 72
Ring Volume (Menu 3.2). . . . . . . . . . . . . 72
Alert Type (Menu 3.3) . . . . . . . . . . . . . . 73
Keypad Tone (Menu 3.4) . . . . . . . . . . . . 73
Message Tone (Menu 3.5). . . . . . . . . . . . 74
AutoFolder Tone (Menu 3.6) . . . . . . . . . . 75
Extra Tones (Menu 3.7) . . . . . . . . . . . . . 75
Solving Problems. . . . . . . . . . . . . . . . 113
5
4
Contents
Important Safety
Precautions
Access Codes. . . . . . . . . . . . . . . . . . . 116
Phone Password . . . . . . . . . . . . . . . . . . 116
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . 117
PUK . . . . . . . . . . . . . . . . . . . . . . . . . . 117
PIN2. . . . . . . . . . . . . . . . . . . . . . . . . . 118
PUK2 . . . . . . . . . . . . . . . . . . . . . . . . . 118
Barring Password . . . . . . . . . . . . . . . . . 119
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal. For more detailed safety
information, see “Health and Safety Information”
on page 120.
Road Safety at All Times
Do not use a hand-held phone while driving;
park the vehicle first.
Health and Safety Information. . . . . . 120
Exposure to Radio-Rrequency Energy
(SAR Information) . . . . . . . . . . . . . . . . 120
Precautions When Using Batteries . . . . . . 122
Road Safety. . . . . . . . . . . . . . . . . . . . . 124
Operating Environment . . . . . . . . . . . . . 126
Potentially Explosive Atmospheres. . . . . . 128
Emergency Calls. . . . . . . . . . . . . . . . . . 129
Other Important Safety Information . . . . 130
Care and Maintenance. . . . . . . . . . . . . . 131
Switching Off When Refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using
them in aircraft is both illegal and dangerous.
Glossary . . . . . . . . . . . . . . . . . . . . . . 133
Quick Reference Card . . . . . . . . . . . . 137
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for
example).
7
6
Important Safety Precautions
Unpacking
Radio Frequency Exposure
Your package contains the following items.
The design of this phone complies with European
Union (EU) requirements relating to radio
frequency (RF) exposure. To maintain
compliance with these requirements, use only
Samsung-supplied or approved accessories. Use
of non-approved accessories may violate the
requirements.
Handset
Travel Adapter*
Batteries
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna
when the phone is switched on.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Battery Charger
Qualified Service
Only qualified service personnel may install or
repair your phone.
Ear-microphone
User’s Manual
Hand Strap
* The Shape of the plugs may vary according to the country’s
specification.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer.
• Ear-microphone
• Standard/Extended batteries
• Simple hands-free kit
• Car holder
• Cigarette lighter adapter
9
8
Your Phone
Your Phone
Key
Description
Phone Layout
Perform the functions indicated by the
text above them on the bottom line of
the display.
The following illustrations show the main
elements of your phone.
(soft keys)
In menu mode, scroll through the
menu options and phonebook memory.
Earpiece
In idle mode, allow you to access your
favourite menu option directly ; for
more information about shortcuts, see
page 86.
Folder
Display
In menu mode, return to the previous
menu level and select the current menu
respectively.
When entering text, move the cursor to
the left and to the right respectively.
Navigation keys
In idle mode, allow you to access your
favourite menu option directly ; for
more information about shortcuts, see
page 86.
Soft key (right)
Soft key (left)
WAP Browser
key
Power on/off /
menu exit key
Volume/menu
browse keys
In idle mode, quickly launches the WAP
browser.
Dial/menu
confirmation key
Cancel/
Alphanumeric
keys
correction key
Makes or answers a call.
IrDA port
Microphone
Special function
keys
When held down in idle mode, recalls
the last number dialled or received.
In menu mode, selects a menu
function or stores information that you
have entered, such as a name, in the
phone or SIM memory.
Antenna
Ear-microphone
jack
Auto folder key
External display
11
10
Your Phone
Your Phone
Key
Description (Continued)
Display
Deletes characters from the display.
In menu mode, returns to the previous
menu level.
Display Layout
The display comprises three areas.
Ends a call. Also switches the phone on
and off when held down.
Icons
In menu mode, cancels your input and
returns to idle mode.
Text and
graphic area
In idle mode, allows you to quickly
access your voice mail server when
held down.
Enter numbers, letters and some
special characters.
Menu
Name
Soft keys
indications
Area
Description
Enter special characters.
Perform various functions.
First line
Displays various icons (see page
14).
(on the left side of the phone)
During a call, adjust the earpiece
volume.
Middle lines
Display messages, instructions
and any information that you
enter (number to be dialled, for
example).
In idle mode, adjust the key tone
volume.
Last line
Shows the functions currently
assigned to the two soft keys.
In menu mode, scroll through the
menu options and phonebook memory.
(on the right side of the phone)
Opens or closes the folder.
13
12
Your Phone
Your Phone
Icons
Backlight
Icon
Description
The display is illuminated by a backlight. When
you press any key, the backlight illuminates. It
turns off if no key is pressed within a given
period of time, depending on the Back Light
option in the Phone Settings menu.
Shows the received signal strength. The
greater the number of bars, the
stronger the signal strength.
Appears when a call is in progress.
To specify the length of time for which the
backlight is active, set the Back Light menu
option (Menu 4.7.2); see page 83 for further
details.
Appears when you are out of your home
area and have registered onto a
different network, for example, when
travelling in other countries.
You can also set the phone to use the backlight
only during a specified period time via the Auto
Light menu option (Menu 4.7.3); see page 83
for further details.
Appears when a new text message is
received.
Appears when a new voice mail
message is received.
External Display
Appears when the IrDA port is active.
For details, see page 76.
Your phone has an external display on the folder.
It indicates when you have an incoming call or a
message. It also alerts you when you set an
alarm at the specified time.
Appears when you are entering English
text.
Appears when you set an alarm.
When you press and hold down one of the
volume keys on the left side of the phone with
the folder closed, the backlight of the external
display illuminates.
Appears when silent mode is active or
when you set the phone to vibrate
when a call comes in via the Alert
Type menu option (Menu 3.3).
Appears when mute mode is active.
Shows the level of your battery. The
more bars you see, the more power
you have left.
15
14
Getting Started
Getting Started
3. Slide the SIM card into the SIM card socket so
that it locks the card in position. Make sure
that the notched corner is at the top left and
the gold contacts of the card face into the
phone.
Installing the SIM Card
When you subscribe to a cellular network, you
are provided with a plug-in SIM card loaded with
your subscription details, such as your PIN, any
optional services available and so on.
Important! The plug-in SIM card and its
contacts can be easily damaged by
scratching or bending, so be careful
when handling, inserting or
removing the card.
Keep all SIM cards out of the reach
of small children.
Note: When you need to remove the SIM card,
slide it, as shown, and take it out of the
socket.
1. If necessary, switch off the phone by holding
down the
key until the power-off image
is displayed.
2. Remove the battery. To do so:
➀ Press the catch above the battery towards
the top of the phone and hold it in that
position.
➀ Lift the battery away, as shown.
4. Place the battery back to match the tabs on it
to the holes at the bottom of the phone.
17
16
Getting Started
Getting Started
5. Press the battery down until it clicks into
place.
2. Plug the connector of the travel adapter into
the jack at the bottom of the charger.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter and a battery charger
are provided with your phone. Use only
approved batteries and chargers. Ask your local
Samsung dealer for further details.
3. Plug the adapter into a standard AC wall
outlet.
The LED on the charger will indicate the
Note: You must fully charge the battery before
using your phone for the first time. A
discharged battery is fully recharged in
approximately 200 minutes.
charging progress with the following colours:
• Red: the battery is charging
• Green: the battery is completely charged
• Yellow: the battery is not correctly plugged
in or operating in a too high or too low
temperature.
Using the Battery Charger
Using the battery charger, you can charge the
battery alone.
4. When charging is finished, unplug the adapter
from both the power outlet and the charger.
1. Insert the battery into the charger, ensuring
that the terminals on the battery are in
contact with those on the charger. Press the
battery down until it clicks into place.
19
18
Getting Started
Getting Started
5. Take the battery out of the charger.
3. When charging is finished, unplug the adapter
from both the power outlet and the phone.
N
ote: Not remove the battery from the phone
without unplugging the adapter while it is
charging. If you do this, the phone may
be damaged.
Using the Travel Adapter
The travel adapter allows you to use the phone
while the battery is charging, but this will cause
the phone to charge more slowly.
Low Battery Indicator
1. With the battery in position on the phone,
plug the connector of the travel adapter into
the jack at the bottom of the phone.
When the battery is weak and only a few
minutes of talk time remain, you will hear a
warning tone and a message will be repeated at
regular intervals on the display:
2. Plug the adapter into a standard AC wall
outlet.
When the battery becomes too weak for the
phone to operate, it switches off automatically.
21
20
Getting Started
Call Functions
Switching the Phone On/Off
Making a Call
1. Open the folder.
When the idle screen is displayed, key in the
area code and phone number, and press the
key.
2. Hold down the
switches on.
key until the phone
3. If the phone asks for a password, key in the
password and press the OK soft key. The
phone password is factory set to “00000000.”
For further details, see page 116.
Note: If you have checked the Auto Redial option
in the Extra Settings menu (Menu 4.8),
the number is redialled automatically up to
ten times when the person does not answer
your call or is already on the phone; see
page 84 for further details.
4. If the phone asks for a PIN, key in the PIN
and press the OK soft key. For further details,
see page 117.
Making an International Call
The phone searches for your network and
when it finds the network, the idle screen,
illustrated below, appears on each display.
Now, you can make or receive a call.
1. Press and hold down the 0 key.
The + international prefix appears.
2. Key in the country code, area code and phone
number and press the
key.
Correcting the Number
To clear...
Press the...
C key.
the last digit
displayed
any other digit
in the number
or key until the cursor is
next to the right of the digit
to be cleared. Press the C
key. You can also insert a
missing digit simply by
Note: To change the display language, use the
Language menu option (Menu 4.5); for
further details, refer to page 79.
5. When you wish to switch the phone off, hold
pressing the appropriate key.
down the
is displayed.
key until the power-off image
the whole display C key for more than one
second.
23
22
Call Functions
Call Functions
Ending a Call
Making a Call from the Phonebook
When you want to finish your call, briefly press
You can store frequently-dialled phone numbers
with a name in the SIM card or the phone
memory, which is called the phonebook. You
then simply select the required name to recall
the associated number. For further details about
the Phonebook features, refer to page 34.
the
key.
Redialling the Last Number
The phone stores the numbers you dialled,
received or missed, if the caller is identified; see
“Call Records” on page 69 for further details.
Adjusting the Volume
To recall any of these numbers:
During a call, if you want to adjust the earpiece
1. If you have typed any characters on the
display, clear the display by holding down the
C key for more than one second.
volume, use the
of the phone.
and
keys on the left side
Press the
and the
key to increase the volume level
key to decrease the level.
2. Press the
numbers in order of time in which the call was
made; is displayed for dialled calls, for
received calls, and for missed calls.
key to display a list of the last
3. Use the
and
keys to scroll through the
numbers until the required number is
highlighted.
4. To...
Press the...
dial the number
highlighted
key.
edit the number
highlighted
Edit soft key, and
change the number as
needed, referring to
“Correcting the Number”
on page 23 for further
details.
In idle mode, you can adjust the key tone
volume using these keys.
25
24
Call Functions
Call Functions
Answering a Call
Viewing Missed Calls
When somebody calls you, the phone rings and
the following screens appear on each display.
If you are unable to answer a call for any
reason, you can find out who was calling you,
provided that this service is available, so that
you can call the person back, if necessary.
The number of missed calls is displayed on the
idle screen immediately after a call was missed.
To view the missed call immediately:
1. If the folder is closed, open it.
2. Press the View soft key.
When the caller can be identified, the caller’s
phone number or name, if stored in your
phonebook, will be displayed.
3. The number corresponding to the most recent
missed call is displayed, if available.
1. If necessary, open the folder. Press the
key or the Accept soft key to answer the
incoming call.
4. To....
scroll through the
Press the...
or
key.
If the Anykey Answer option in the Extra
Settings menu (Menu 4.8) is checked, you
can press any key to answer a call except for
missed calls
call the number
displayed
key.
the
key and the Reject soft key (see
page 85).
edit or delete a
Select soft key (see
If the Active Folder option in the Extra
Settings menu (Menu 4.8) is checked, you
can answer the call simply by opening the
folder (see page 85).
missed call number
the following section).
Editing a Missed Call Number
Note: To reject the call, press and hold one of
the volume keys on the left side of the
phone without opening the folder.
Note: If the number corresponding to the missed
call is not available, the Edit Number option
is not displayed.
2. End the call by closing the folder or pressing
1. Press the Options soft key.
the
key.
2. If necessary, press the
or
key to
Note: You can answer a call while using the
highlight the Edit Number option.
phonebook or menu features.
27
26
Call Functions
Call Functions
Quickly Switching to Silent Mode
3. Press the Select soft key.
Silent Mode is convenient when discretion is
required and you a wish to stop the phone from
making any noise, in a theatre for example.
4. Change the number as required.
5. To...
call the number
store the number
Press the...
In idle mode, to switch your phone quickly to
the silent mode, simply press and hold down the
key until the “Silent Mode” message and
key.
Save soft key and
enter the name and
location required (for
further details, refer to
page 34).
vibration icon ( ) are displayed.
In the silent mode, your phone switches the
sound settings as listed below:
Option
New Setting
Vibration
OFF
Deleting a Missed Call
Alert Type (Menu 3.3)
Keypad Tone (Menu 3.4)
Error Tone (Menu 3.7.1)
1. Press the Options soft key.
OFF
2. If necessary, press the
or
key to
highlight the Delete option.
To exit the silent mode and reactivate the
previous Sound Settings, press and hold the
key again until “Exit Silent Mode” appears. The
3. Press the Select soft key.
You can press the
key at any time to exit
vibration icon ( ) is no longer displayed.
the Missed Call feature.
Note: You can access the Missed Call feature at
any time by selecting the Missed Calls
menu option (Menu 2.1); for further details,
see page 69.
29
28
Selecting Functions and Options
Selecting Functions
and Options
To view the various functions/options available
and select the required one:
Your phone offers a set of functions that allow
you to customise your phone. These functions
are arranged in menus and sub-menus, accessed
1. Press the appropriate soft key.
via the two soft keys (
and sub-menu allows you to view and alter the
settings of a particular function.
and ). Each menu
2. To...
select the:
Press the...
Select soft key or
• Function displayed
or
• Option highlighted
the
key.
The roles of the soft keys vary according to the
current context; the label on the bottom line of
the display just above each key indicates its
current role.
view the next function
or highlight the next
option in a list
key or
key on
the left side of the
phone.
Example:
move back to the
previous function or
option in a list
key or
the left side of the
phone.
key on
move back up one
level in the structure
key,
C key.
soft key or
exit the structure
without changing
the settings
key.
In some functions, you may be asked for a
password or PIN. Enter the required code and
press the OK soft key.
Press the left soft
key to enter
menu mode.
Press the right soft
key to enter the
Phonebook menu.
31
30
Selecting Functions and Options
Selecting Functions and Options
Example: Setting the Display
Language
4. Scroll through the sub-menus until you reach
the Language sub-menu, by pressing the
and
key.
1. When the idle screen is displayed, press the
Menu soft key to enter menu mode.
Shows the current
setting.
5. To view the languages available, press the
Select soft key or the
setting is highlighted.
key. The current
2. Scroll through the menus until you reach the
Phone Settings menu, by pressing the
and
key.
Language
Current language
English
Indonesia
Malaysia
Note: The phone may
display English only,
depending on your
country.
Select
4.5.1
6. Scroll through the list of languages until the
appropriate one is highlighted, by pressing
3. To select the Phone Settings menu, press
the
and
key.
the Select soft key or the
key.
7. Press the Select soft key or the
key to
confirm your selection.
8. Press the C or key twice to exit the menu
If the menu name is too
long for the display, it is
scrolled when highlighted.
structure.
33
32
Phonebook
Phonebook
4. Enter a name and press the OK soft key.
You can store phone numbers and their
corresponding names in the memory of your SIM
card. In addition, you can store up to 500
numbers in the phone memory. The SIM card
and phone memories, although physically
separate, are used as if they were a single
entity, called the phonebook.
The maximum length of a name depends on
your SIM card. For more information about
how to enter characters, see page 43.
5. Press the OK soft key to confirm your input.
The phone now displays the first free location
in the last memory used to save a number
and name. If that memory is full, the first
free location in the other memory is
displayed.
Storing a Number with a Name
Note: If you change phones, any numbers
stored in your SIM card memory will
automatically be available with the new
phone, whereas any numbers stored in
the phone memory must be restored.
There two ways to store a number:
• Using the Save soft key in idle mode
• Using the New Entry option in the Phonebook
menu
6. Press the right soft key, labelled as To Card
or To Phone to toggle between the phone
and card memories.
Storing a Number in Idle mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to
store the number in the phonebook.
7. If you do not want to save the number and
name in the suggested location, press the C
key to clear the location number and enter
your preferred location by pressing the
number keys.
1. Key in the number to be stored.
Note: If you make a mistake while entering a
number, correct it using the C key. For
further details, refer to page 23.
8. Press the OK soft key to store the name and
number.
After storing, the phone displays the
phonebook entry or name just created.
2. When you are sure that it is correct, press the
Save soft key.
3. Select an icon for to identify the category of
number to be stored. Three categories are
9. To...
use the entry options
Press the...
Options soft key. For
details on the
options, see page 36.
available;
(office number) and
(mobile phone number),
(home number). To
select the category, press the
or
key,
followed by the Select soft key.
return to the idle
screen
key.
35
34
Phonebook
Phonebook
The following options are available:
Storing a Number using the Phonebook
Menu
Paste: allows you to paste the selected number
into the normal dialling mode. Use this option to
dial a number similar to one in the phonebook,
for example, a different extension in the same
office.
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to New Entry by pressing the
or
key and press the Select soft key.
Use the C key to change the number as needed;
refer to page 23 for further details. When you
3. Select an icon to identify the category of the
number to be stored.
are ready to dial, press the
key.
Edit: allows you to edit the Phonebook entry.
Select One Entry to change one number in the
selected name. If you change the name, the
number is saved separately. Select All Entry to
change the name of the entry.
Note: The E-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
4. Continue the procedure from Step 4 on page
35 to store the number.
Erase: allows you to erase the selected number
and name from the phonebook. You are asked to
confirm that you wish to erase the name and
number by pressing the Yes soft key.
Using Phonebook Entry Options
Copy: allows you to copy the selected number
to another location. Use this option to store a
number similar to one already in the memory;
once copied, edit the number and store it in the
phonebook.
While accessing any phonebook entry, press the
Options soft key to access the options for the
entry.
Caller Group: allows you to assign the selected
number to a caller group to set the phone to
alert in a particular way when the person of the
entry calls you. Select one of the 10 groups.
To...
Press the...
select the highlighted
option
Select soft key or the
key.
To remove entry from a group, select the No
Group option.
highlight a different
option
or
key until
the required option is
highlighted.
For details about changing the caller group
properties, see page 40.
Add Entry: allows you to add a new number in
a different category (mobile, office, home or
E-mail) to the currently selected name. A
phonebook entry or name can contain up to four
numbers, one in each category.
37
36
Phonebook
Phonebook
Searching for a Number in the
Phonebook
6. Once you have found the required entry,
press the key to dial the number, or press
the Options soft key to access the
phonebook entry options; for further details,
see page 36.
After storing numbers in the Phonebook, you can
search for them in two ways; by name and by
caller group.
Searching a Number by Caller Group
Searching for a Number by Name
1. When the idle screen is displayed, press the
Name soft key.
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to Group Search by pressing the
or
key and press the Select soft key. You
2. Press the Select soft key when Search is
are asked to enter a group name.
highlighted. You are asked to enter a name.
3. Enter the first few letters of the group name
that you wish to find.
3. Enter the first few letters of the entry name
that you wish to find.
The caller groups are listed, starting with the
first group matching your input. The group is
also highlighted.
The phonebook entries are listed, starting with
the first entry matching your input. This entry
is also highlighted.
4. Scroll to the desired group by pressing the
or
key and press the View soft key.
4. To...
view the highlighted
Press the...
The phonebook entries in the selected caller
group are listed.
View soft key.
entry
select a different entry
or
key until
5. To...
Press the...
the required entry is
highlighted.
view the highlighted
entry
View soft key.
look for a name
starting with a
different letter
key labelled with the
required letter.
select a different entry
or
key until
the required entry is
highlighted.
look for a name
starting with a
different letter
key labelled with the
required letter.
5. Find the required number under the name by
pressing the or key.
39
38
Phonebook
Phonebook
Speed-dialling
6. Once you have found the required entry,
press the
key to dial the number, or press
Once you have stored phone numbers in the
phonebook, you can set up to 8 speed-dial
entries and then dial them easily whenever you
want, simply by pressing the associated number
key.
the Options soft key to access the
phonebook entry options; for further details,
see page 36.
Editing a Caller Group
Setting up Speed-dial Entries
1. When the idle screen is displayed, press the
1. When the idle screen is displayed, press the
Name soft key.
Name soft key.
2. Scroll to Group Edit by pressing the
or
2. Scroll to Speed Dial by pressing the
or
key and press the Select soft key.
key and press the Select soft key.
3. Scroll through the group list by pressing the
or key.
3. Select one of the keys 2 to 9 to which you
want to assign the speed-dialling feature and
press the OK soft key.
4. When the desired group is highlighted, press
the Options soft key. The following options
are available:
Note: If you have already assigned a number to
the key, the Options soft key replaces
the OK soft key. Go to Step 7.
• Call ring tone: allows you to select the
ring melody to be used when you receive a
voice call from a person in the group.
4. Enter the name of the phonebook entry you
want to use and press the OK soft key.
• SMS tone: allows you to select the ring
tone to be used when you received a text
message from a person in the group.
5. Select the required phonebook entry from the
list and press the View soft key.
• Graphic: allows you to select the graphic
icon to be displayed when you receive a
voice call from a person in the group.
6. Select the required number if the entry has
more than one number, by pressing the
or
key and press the Select soft key.
• Group Name: allows you to assign a name
to the group; for further details about how
to enter characters, see page 43.
7. Once you have assigned a number to the
selected key, four options are available:
• Change: allows you to assign a different
number to the key.
5. Select the desired option by pressing the
or
key, followed the Select soft key, and
change the setting.
• Erase: allows you to clear the setting so
that no number is assigned to the key.
6. When you finish changing the settings, press
the C or
key.
41
40
Phonebook
Entering Text
• Erase All: allows you to clear the settings
When using your phone, you will often need to
enter text. For example, when storing a name in
the phonebook, creating your personal greeting
or scheduling events in your calendar. You can
enter alphanumeric characters by using your
phone’s keypad.
for all keys so that no numbers are
assigned to any of the keys.
• Number: allows you to view the number
assigned to the key.
8. When you finish setting up the speed-dial list,
press the C or
key.
The following text input modes are available on
your phone:
Speed-dialling from the Phonebook
• T9 mode
To speed-dial the number in key locations 2 to 9,
press and hold down the appropriate number
key.
This mode allows you to enter words with only
one keystroke per letter. Each key on the
keypad has more than one letter - when you
press the 5 key once, J, K or L displays. The
T9 mode automatically compares your
keystrokes with an internal linguistic dictionary
to determine the correct word, thus requiring
far fewer keystrokes than the traditional
upper/lower-case character modes.
Note: Memory location 1 is reserved for your voice
mail server number.
Checking Memory Status
• Symbol mode
You can check how many names and numbers
are stored in the phonebook (card and phone
memories) or how many free locations remain.
This mode allows you to enter various symbols
and special characters.
1. When the idle screen is displayed, press the
• Upper/lower-case character modes
Name soft key.
These modes allow you to enter letters by
pressing the key labelled with the required
letter once, twice or three times until the
letter displays.
2. Scroll to the Memory Status option by
pressing the
Select soft key.
or
key and press the
• Number mode
3. Press the
or
key to view the number
of existing and remaining entries in the card
and phone memories.
This mode allows you to enter numbers.
43
42
Entering Text
Entering Text
Changing the Text Input Mode
Using the T9 Mode
When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator on the display.
The T9 predictive text input mode allows you to
key in any character using single keystrokes.
This text input mode is based on a built-in
dictionary.
Example: Writing a message
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys
2 to 9. Press each key only once for one
letter.
Text input mode
indicator
Example: to enter HELLO in the T9 mode,
press
,
,
,
and
.
The word what you are typing appears in the
display. It may change with each key that you
press.
To select the...
T9 mode
Press the
until...
soft key
2. Enter the whole word before editing or
deleting the keystrokes.
displays.
See page 45.
3. If the word is correct, start entering the text
word.
Symbol mode
displays.
See page 46.
Otherwise, press 0,
or
key repeatedly
to display alternative word choices for the
keys that you have pressed.
Upper-case character
mode
displays.
See page 47.
A
Example: both OF and ME have the sequence
Lower-case character
mode
a displays.
See page 47.
,
. The phone displays the
most commonly used choice first.
Number mode
1 displays.
See page 48.
4. Complete each word with a space by pressing
the
key.
• To type words not found in the T9 mode,
change the text input mode to the
upper/lower-case character input mode.
45
44
Entering Text
Entering Text
• To enter full stops, hyphens or apostrophes,
Using the Upper/Lower-case
Character Mode
press the
key. The T9 mode applies
grammar rules to ensure that the correct
punctuation is used.
use the 1 to 0 keys to enter your text.
Example:is
used
twice
to
display
two
punctuation marks:
1. Press the keys labelled with the required
letter:
-Once for the first letter
-Twice for the second letter
-And so on
L
E
T
’
S
E
A
T
.
• To shift the case in the T9 mode, use the
key.
2. Select the other letters in the same way.
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice or a different letter on the
same key, just wait for a few seconds for the
cursor to move right automatically, and then
select the next letter.
• You can move the cursor by using the and
keys. To delete letters, press the
key. Press
and hold down the
key to clear the display.
Using the Symbol Mode
Refer to the table below for more information about
the characters available.
The symbol mode enables you to insert symbols
into a text message.
Use the navigation keys to scroll to the desired
symbol and then press OK soft key to insert the
highlighted symbol into your message.
47
46
Entering Text
Options During a Call
• To insert a space, press the
key.
Your phone provides a number of control
functions that you can use during a call.
• You can move the cursor by using the and
keys. To delete letters, press the key. Press
key to clear the display.
and hold down the
Putting a Call on Hold
You can place the current call on hold whenever
you want. You can make another call while you
have a call in progress if this service is
supported by the network. Of these two calls,
one is active and the other is on hold and you
can switch between the calls.
Using the Number Mode
The Number mode enables you to enter numbers
into a text messages. Press the keys
corresponding to the desired digits, and
manually switch back to the text input mode of
choice.
To place a call on hold, simply press the Hold
soft key. You can reactivate the call whenever
you want, by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Key in the phone number that you wish to dial
or look it up in the phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the
Hold soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press
the Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you want to finish the calls, end each call
normally by pressing the
key.
49
48
Options During a Call
Options During a Call
Switching the Microphone Off (Mute)
Muting/Sending Key Tones
You can temporarily switch your phone’s
microphone off, so that the other party cannot
hear you.
These options allow you to turn the key tones off
or on. If the Mute keys option is selected, your
phone does not transmit the key tones. It allows
you to press keys without hearing annoying key
tones during a call.
Example: You wish to say something to another
person in the room but do not want
the other party to hear you.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
To switch the microphone off temporarily:
1. Press the Options soft key.
Searching for a Number in the
Phonebook
2. If necessary, press the
key to highlight
the Mute option.
3. Press the OK soft key. The other party can no
You can search for a number in the phonebook
during a call.
longer hear you.
1. Press the Options soft key.
To switch the microphone back on:
2. Press the
option.
key to highlight the Phonebook
1. Press the Options soft key.
2. If necessary, press the
key to highlight
3. Press the OK soft key.
the Unmute option.
The phonebook entries are listed.
4. Enter the name that you wish to find.
3. Press the OK soft key. The other party can
hear you again.
If you enter the first few letters of the name,
all phonebook entries are listed, starting with
the first entry matching your input. The entry
is also highlighted.
5. To view the highlighted entry, press the View
soft key.
For a more detailed description about the
Phonebook feature, refer to page 34.
51
50
Options During a Call
Options During a Call
Using the SMS Service
Making a Multiparty Call
If you receive an SMS (Short Message Service)
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more
message during a call, the message icon (
)
flashes on the display. The SMS Service option
enables you to use this feature.
information, contact your service provider.
Read Messages: allows you to read the
messages that you received.
Setting up the Multiparty Call
Write Messages: allows you to write a message.
1. Call the first participant in the normal way.
For further details about the SMS service, refer to
page 61.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multiparty
call, press the Options soft key and select
the Join option.
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you set the Call Waiting menu
option (Menu 6.3) to Activate (see page 101).
You will be notified of an incoming call by a call
waiting tone.
4. To add a new person to the multiparty call,
call the person in the normal way, then press
the Options soft key and select the Join
option.
You can add incoming callers by answering the
call and pressing Options, followed by Join.
Repeat as needed.
To answer a call while you have a call in
progress:
1. Press the
key to answer the incoming call.
Having a Private Conversation With
One Participant
The first call is automatically put on hold.
2. To switch between the two calls, press the
1. Press the Options soft key and choose the
Swap soft key.
Select one option.
To end a call on hold, press the Options soft
key and select the End Held Call option.
The list of call participants appears.
2. Highlight the required person, by pressing the
3. To end the current call, press the
key.
or
key, followed by the Select soft
key or the
key.
53
52
Options During a Call
Using the Menus
3. Select the Private option.
The phone offers a range of functions that allow
you to tailor the phone to your needs. These
functions are arranged in menus and sub-menus.
Now you can talk privately with that person.
The other participants can continue to
converse with each other.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
4. To return to the multiparty call, press the
Options soft key and select the Join option.
All the multiparty call participants can now
hear each other.
Accessing Menu Functions by
Scrolling
Dropping One Participant
1. Press the Options soft key and choose the
1. In idle mode, press the Menu soft key to
Select one option.
access menu mode.
The list of call participants appears.
2. Scroll with the
and
keys to reach the
required main menu, Phone Settings for
example. Press the Select soft key or the
key to enter the menu.
2. Highlight the required person, by pressing the
or
key, followed by the Select soft
key or the
key.
3. If the menu contains any sub-menus,
3. Select Remove.
Language for example, you can access them
by scrolling with the
pressing the Select soft key.
and
keys and
The call is ended with that participant, but
you can continue to talk with the other
participants.
If the menu that you have selected contains
further options, repeat the same procedure.
4. End the multiparty call by closing the folder or
pressing the
key.
4. To...
Press the...
scroll through the
menus
or
use the
keys on the left side
of the phone.
key or
and
confirm the chosen
setting
Select soft key or the
key.
55
54
Using the Menus
To...
Using the Menus
List of Menu Functions
Press the...
return to the
previous menu level
soft key or the
key.
The following illustration shows the menu
structure available and indicates the:
exit the menu
without changing
the settings
key.
• Number assigned to each option.
• Page on which you can find a description of
each feature.
Note: If you use a SIM AT card that provides
additional services, the SIM AT (8) menu is
displayed first when you press the Menu
soft key to enter menu mode. For further
details, refer to your SIM card user’s guide.
Accessing Menu Functions by Using
Shortcuts
The menu items, such as menu, sub-menus and
options, are numbered and can be accessed
quickly, using their shortcut number. The shortcut
number is shown at the bottom right next to the
soft key on the display. Simply press the
1. Messages (see page 61)
1.1 Read Messages
1.1.1 Inbox
1.1.2 Outbox
1.2 Write Messages
1.3 Templates
Menu soft key and key in the required number.
1.4 Setup
Example: Accessing the Language option.
1. Press the Menu soft key.
1.4.1 Setting 1*
1.4.2 Setting 2*
1.4.3 Common Setting
1.5 Broadcast
2. Press the 4 key for Phone Settings.
1.5.1 Read
1.5.2 Receive
3. Press the 5 key for Language.
1.5.3 Channel List
1.5.4 Language
1.6 Voice Mail
The languages available are displayed directly.
1.6.1 Connect to Voice Server
1.6.2 Voice Server
1.7 My Contents
1.7.1 My Melody
1.7.2 My Picture
1.7.3 My Animation
Note: The numbers assigned to each menu option
are indicated in the list on page 57. They
may not match the menu number on the
phone. It depends on the services supported
by the SIM card.
* Shown only if supported by your SIM card.
57
56
Using the Menus
Using the Menus
1. Messages (continued)
4. Phone Settings (see page 76)
1.8 Memory Status
4.1 Infrared Activate
4.2 My Settings
1.8.1 SIM memory
1.8.2 PHONE memory
1.8.3 CB memory
4.2.1 Wallpaper
4.2.2 Colour Theme
4.2.3 Menu Style
4.3 Greeting Message
4.4 Own Number
4.5 Language
2. Call Records (see page 69)
2.1 Missed Calls
2.2 Received Calls
2.3 Dialled Calls
2.4 Call Time
2.4.1 Last Call Time
2.4.2 Total Sent
2.4.3 Total Received
2.4.4 Reset Timers
2.5 Call Cost*
4.6 Security
4.6.1 PIN Check
4.6.2 Change PIN
4.6.3 Phone Lock
4.6.4 Change Password
4.6.5 SIM Lock
4.6.6 FDN Mode*
4.6.7 Change PIN2*
4.7 LCD Settings
4.7.1 Contrast
2.5.1 Last Call Cost
2.5.2 Total Cost
2.5.3 Max Cost
2.5.4 Reset Counters
2.5.5 Set Max Cost
2.5.6 Price/Unit
4.7.2 Back Light
4.7.3 Auto Light
4.7.4 Graphic Logo
4.8 Extra Settings
4.8.1 Auto Redial
4.8.2 Active Folder
4.8.3 Anykey Answer
4.8.4 Auto Folder
4.9 Short Cut
3. Sound Settings (see page 72)
3.1 Ring Tone
3.2 Ring Volume
3.3 Alert Type
4.10 Reset Settings
3.4 Keypad Tone
3.5 Message Tone
3.5.1 SMS Tone
3.5.2 SMS-CB Tone
3.6 AutoFolder Tone
3.7 Extra Tones
3.7.1 Error Tone
3.7.2 Minute Minder
3.7.3 Connect Tone
5. Organiser (see page 88)
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Time Format
5.4 Alarm
5.5 Calculator
5.6 Currency Exchange
* Shown only if supported by your SIM card.
* Shown only if supported by your SIM card.
59
58
Using the Menus
Messages
6. Network Services (see page 97)
The SMS (Short Message Service) function is a
network service and may not be supported by
your network. Messages can be sent by text,
fax, Email and paging messaging systems,
provided that these services are supported by
your network. To send text messages by phone,
you must obtain the number of the SMS centre
from your service provider.
6.1 Call Diverting
6.1.1 Divert Always
6.1.2 Busy
6.1.3 No Reply
6.1.4 Unreachable
6.1.5 Cancel All
6.2 Call Barring
6.2.1 All Outgoing
6.2.2 International
When the message icon ( ) appears, you have
received new text messages. If the message
memory is full, an error message is displayed
and you cannot receive any new messages. Use
the Delete option in the Read Messages menu
(Menu 1.1) to delete obsolete messages.
6.2.3 International Except to Home
6.2.4 All Incoming
6.2.5 Incoming While Abroad
6.2.6 Cancel All
6.2.7 Change Barring Password
6.3 Call Waiting
6.3.1 Voice Calls
6.3.2 Cancel All
6.4 Network Selection
6.4.1 Automatic
Read Messages (Menu 1.1)
6.4.2 Manual
6.5 Caller ID
Two message boxes are available:
Inbox: used to store the messages that you
received.
6.5.1 Default
6.5.2 Hide Number
6.5.3 Send Number
6.6 Closed User Group
6.6.1 Index List
Outbox: used to store the messages that you
already sent or will send.
6.6.2 Outside Access
6.6.3 Default Group
6.6.4 Deactivate*
Reading a Message
1. Select the required box and press the Select
soft key.
7. Fun Box (see page 105)
The list of messages in the box is displayed
by the sender or recipient’s phone number or
name if it is available in your phonebook.
7.1 Games
7.2 WAP Browser
7.3 Downloads
7.3.1 Sounds
7.3.2 Pictures
2. Select the required message and press the
View soft key to view the message contents.
3. To scroll through the message, press the
* Shown only if the Closed User Group Feature is active.
or
key.
61
60
Messages
Messages
While reading a message, you can choose the
following options by pressing the Options soft
key.
1. Create a message.
Note: For more information about entering
characters, refer to page 43.
Delete: allows you to delete obsolete messages.
2. If you press the Options soft key while
entering a message text, the following options
are available.
Text Reply (Inbox only): allows you to reply to
the sender by sending a text message. You can
also change the SMS centre number, if required.
• Send Only: allows you to send the message.
The message will be deleted after sending.
Call Back (Inbox only): allows you to call the
sender back.
• Save and Send: allows you to save a copy
of the message and then send the message
to the required destination. You can read the
message in your outbox using the Read
Messages option.
Cut Number: allows you to extract a number
from the message text, so that you can call the
number or save it in the phonebook.
Send: allows you to send a message that you
have received or saved. For further information
for sending a message, see below.
• Save Only: allows you to save the message
so that it can be sent later. You can read the
message in your outbox using the Read
Messages option.
Edit Message: allows you to edit a message.
• Add Objects: allows you to add the sounds,
pictures, or animations to the message.
Select the category of the object to be added;
Sound, Picture, Animation and My
Select Objects: allows you to save the items,
such as sounds or images, from the message
into your phone. You can use the items when
writing a message; for details, see below.
Contents are available. In each category, you
can select the various factory-set items or
choose an item received from other sources,
such as the Internet or other phones.
Note: The options available vary, depending on the
message status; new/old, not sent or sent
for example.
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of the five messages predefined
via the Templates menu option (Menu 1.3);
for further details, see page 64.
Write Messages (Menu 1.2)
In this menu, you can write and send a text
message.
3. When you finish entering your message, press
the Options soft key and select Send Only
or Save and Send.
Note: If you add items to the message, the
number of the characters you can enter will
be decreased.
If you want just to save the message, select
Save Only.
63
62
Messages
Messages
4. Enter the destination number.
Setup (Menu 1.4)
Pressing the Name soft key when it is
displayed allows you to search the Phonebook
for a number.
In this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number
of setting groups available depends on the
capacity of your SIM card. The setting group you
last accessed is automatically activated for
message transmission and you can see a check
mark in front of it.
5. Press the OK soft key. The message is sent.
Templates (Menu 1.3)
Setting x (where x is the setting group number):
each group has its own sub-menu.
Using this menu, you can preset up to five
messages that you use most frequently. Scroll
through the template list using the
keys. When the desired message cell is
highlighted, press the Options soft key.
and
Service Centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Edit: allows you to write a new message or edit
the selected message.
Default Type: allows you to set the default
message type (Text, Fax, Email and Paging). The
network can convert the messages into the
selected format.
Note: For further information about how to enter
characters, refer to page 43.
Default Validity: allows you to set the length of
time for which your text messages will be stored
at the message centre while attempts are made to
deliver them.
Send Message: allows you to recall the selected
message. Once you have completed the
message, you can send, save and send or simply
save it. For details about sending a message,
see page 62.
Setting Name: allows you to give a name to the
setting group currently being defined.
Delete: allows you to delete the selected
message. You are asked to confirm the deletion
by pressing the Yes soft key.
Common Setting: the following options are
available.
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
message centre, if the service is provided by the
network.
Delivery Reports: allows you to activate or
deactivate the report function. When this function
is activated, the network informs you whether
your message has been delivered or not.
65
64
Messages
Messages
Language: allows you to select your preferred
language to be used when displaying cell
broadcast messages.
Broadcast (Menu 1.5)
This network service allows you to receive text
messages on various topics, such as the weather
or traffic. Messages are displayed immediately as
they are received, provided that:
Please contact your service provider for more
information.
• the phone is in idle mode.
Voice Mail (Menu 1.6)
• the Receive option is set to Enable.
• the message channel is currently active in the
channel list.
This menu provides you with a way of accessing
your voice mailbox, if provided by your network.
The following options are available.
The following options are available:
Connect to Voice Server: before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
option 1.6.2). You can then select this option
and simply press the OK soft key to listen to
your messages.
Read: lets you view the message. Volatile
displays the messages from the network, but
loses its contents as soon as the phone is
switched off. Scroll through the message by
using the
and
keys. While reading a
message, press the Save soft key to store it into
the Archive box for later retrieval.
You can quickly connect to the voice server by
pressing and holding the 1 key down in idle
mode.
Receive: allows you to enable or disable the
reception of broadcast messages.
Voice Server: allows you to change the voice
mail server number, if necessary.
Channel List: allows you to indicate the
channels from which you wish to receive
broadcast messages. The following options are
available.
To...
Press the...
enter the server
number
corresponding
numeric keys.
Select: used to enable or disable channels in the
list by marking or unmarking them respectively
(a check mark is displayed in front of each
channel selected).
correct a digit
C key.
move the cursor to the
left/right clearing
without the digit
or
key.
Add Channel: used to declare the ID and title for
a new channel.
Delete: used to remove a channel from the list.
save the number
OK key.
Edit: used to change the ID and title of an
existing channel.
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
67
66
Messages
Call Records
My Contents (Menu 1.7)
In this menu, you can view the:
• phone calls missed, received or dialled.
• length of the calls you made or received.
• cost of the calls you made.
After saving the items from the received messages
into your phone memory by using the Select
Object option (see page 62), you can see them in
this menu.
Note: You can access all numbers in the three call
records by pressing the
mode.
key in idle
To delete the objects in this menu, press the
Delete soft key.
You can forward the items to other people by
including message and/or use them for your ring
tone or background image.
Missed Calls (Menu 2.1)
This option lets you view the last 20 unanswered
calls.
Three categories of objects are available:
The number and name, if available, are
displayed, together with the date and time when
• My Melody
• My Picture
• My Animation
the call was received. Press the
the number.
key to dial
By pressing the Options soft key, you can:
Memory Status (Menu 1.8)
• Delete the call from the list.
• Edit the number if available and dial it or save
it in the phonebook.
This menu shows how many messages are
currently stored in the SIM, phone and CB
memories.
Received Calls (Menu 2.2)
This option lets you view the last 20 received
calls.
The number and name, if available, are
displayed, together with the date and time when
the call was received. Press the
the number.
key to dial
By pressing the Options soft key, you can:
• Delete the call from the list.
• Edit the number if available and dial it or save
it in the phonebook.
69
68
Call Records
Call Records
Dialled Calls (Menu 2.3)
Call Cost* (Menu 2.5)
This option lets you view the last 20 dialled calls.
This network feature lets you view the cost of
calls.
The number and name, if available, are
displayed, together with the date and time when
The following options are available:
the call was made. Press the
number.
key to dial the
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost
exceeds the maximum cost set via the Set Max
Cost option, you can no longer make any calls
until you reset the counter.
By pressing the Options soft key, you can:
• Delete the number.
• Edit the number and dial it or save it in the
phonebook.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Call Time (Menu 2.4)
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 118) and then press the OK soft key.
This option lets you view the timers for calls
made and received.
Set Max Cost: option used to enter the
maximum cost that you authorise for your calls.
The following timers are available:
Last Call Time: length of the last call.
Price/Unit: option used to set the cost of one
unit; this price per unit is applied when
calculating the cost of your calls.
Total Sent: total length of all calls made since
the timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
Reset Timers: option used to reset the call
timers; you must first enter the phone password
(see page 116) and then press the OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
* Shown only if supported by your SIM card.
71
70
Sound Settings
Sound Settings
Alert Type (Menu 3.3)
You can use the Sound Settings menu to
customise various settings, such as the:
• Ring melody, volume and type.
• Sounds made when you press a key, make an
error or receive a message.
This option allows you to specify how you are to
be informed of any incoming calls.
The following options are available:
Note: When the phone is in the silent mode (see
page 29), you cannot change the sound
settings.
Melody: the phone rings using the ring melody
or bell selected via the Ring Tone menu option;
see page 72.
Vibration: the phone vibrates but does not ring.
Ring Tone (Menu 3.1)
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
This option allows you to select the required ring
melody.
Keypad Tone (Menu 3.4)
You can choose between many different
melodies. Each time you select a melody, it is
played for a few seconds. If you have
downloaded any sounds from the Internet or
EasyLink program or received any ring tone
message, you can view the list in this menu.
This option allows you to select the tone that the
keypad generates when you press a key.
The following options are available:
OFF: the keys do not make any sound.
Tone: each key, when pressed, makes a different
sound.
Ring Volume (Menu 3.2)
This option allows you to adjust the ring volume
to one of five levels.
Beep: each key, when pressed, makes the same
sound.
Use the
and
keys or the
and
keys
on the left side of the phone.
73
72
Sound Settings
Sound Settings
Message Tone (Menu 3.5)
AutoFolder Tone (Menu 3.6)
This option allows you to select how the phone
informs you that a new message has been
received.
Using this option, you can set whether the phone
sounds a tone when you open the folder by
pressing the key on the right side of the phone.
The following options are available:
SMS Tone
OFF: the phone does not use any tone.
This option allows you to select how the phone
informs you that a new SMS message has been
received.
Folder Tone1~5: the phone uses a tone. You
are provided with five tones.
The following options are available:
OFF: the phone does not use the SMS tone.
Vibration: the phone vibrates.
Extra Tones (Menu 3.7)
You can turn the several tones to inform you of
some conditions on or off.
SMS Tone1~10: the phone uses an SMS tone.
You are provided with ten SMS tones.
To turn a given Press the...
tone...
On
ON soft key.
A check mark is displayed in
front of the option.
SMS-CB Tone
This option allows you to select how the phone
informs you that a new cell broadcast (CB)
message has been received.
Off
OFF soft key.
The check mark is no longer
displayed.
The following options are available:
OFF: the phone does not use the CB tone.
Vibration: the phone vibrates.
The following options are available:
Error Tone: sets whether the phone informs
you that you have made a mistake or not.
SMS-CB Tone1~10: the phone uses a CB tone.
You are provided with ten CB tones.
Minute Minder: sets whether the phone must
beep every minute during an outgoing call to
keep you informed of the length of your call.
Connect Tone: sets your phone to beep when
the person you are calling answers.
75
74
Phone Settings
Phone Settings
My Settings (Menu 4.2)
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Phone Settings
menu.
You can change the background image and the
colour of the components in the display
according to your preference.
Wallpaper
Infrared Activate (Menu 4.1)
This option allows you to change the background
image (wallpaper) to be displayed in idle mode.
This feature allows you to send or receive
data/fax through the infrared port. To use and
infrared connection, you must:
To change the background image:
1. Scroll through the list by pressing the
key.
or
• Configure and activate an IrDA-compliant
infrared port on your PC.
• Activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
You have various preset images available. You
can also select the blank background and any
images downloaded from the Internet or
EasyLink program.
• Align the IrDA port on the phone with the IrDA
port on your computer.
2. Press the View soft key when the desired
image is highlighted.
IrDA port
3. Press the Select soft key to set the image to
display it on the idle screen.
Colour Theme
IrDA port
You can change the colour setting of the display
components, such as text, soft key display area
or the menu names and icons. Five different
colour settings are available.
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds
of activating the feature, it is automatically
deactivated.
Select the required setting and press the Select
soft key, followed by OK to confirm the highlight
colour and colour theme.
77
76
Phone Settings
Phone Settings
Menu Style
Own Number (Menu 4.4)
This option allows you to select the menu display
style. You can choose between Folder Style and
Nature Style.
This feature allows you to:
• Assign a name to each of your own phone
numbers registered on your SIM card.
• Edit the names and numbers.
Greeting Message (Menu 4.3)
This function is a memory aid, which you can
use to check your own phone numbers, if you
need to do so.
This option allows you to set a greeting message
to be displayed briefly when the phone is
switched on. When you select this menu, the
current message is displayed.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
To...
Press the...
clear the existing
message
C key and hold it down
until the display is cleared.
Language (Menu 4.5)
You can choose a language from English,
Indonesia and Malaysia. The phone may
display English onlym depending on your
country.
enter a new
message
Appropriate alphanumeric
keys.
change the text
input mode
right soft key, labelled with
the current input mode.
save the new
message
OK soft key.
Security (Menu 4.6)
For further details about how to enter
characters, refer to page 43.
The Security feature enables you to restrict the
use of your phone to:
• The people of your choice
• The types of calls of your choice
Various codes and passwords are used to protect
the features of your phone. They are described
in the following sections (see also pages 116-
119).
79
78
Phone Settings
Phone Settings
Once the correct password has been entered,
you can use the phone until you switch it off.
PIN Check
When the PIN Check feature is enabled, you
must enter your PIN each time you switch the
phone on. Consequently, any person who does
not have your PIN cannot use your phone
without your approval.
The following options are available:
Enable: you are required to enter the phone
password when you switch the phone on.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, refer to the Change PIN
menu option (Menu 4.6.2) below.
Change Password
The Change Password feature allows you to
change your current phone password to a new
one. You must enter the current password before
you can specify a new one.
The following options are available:
Enable: you must enter the PIN each time the
phone is switched on.
The password is factory set to “00000000.” Once
you have entered a new password, you are
asked to confirm it by entering it again.
Disable: the phone connects directly to the
network when you switch it on.
Change PIN
SIM Lock
This feature allows you to change your current
PIN to a new one, provided that the PIN Check
feature is enabled. You must enter the current
PIN before you can specify a new one.
When the SIM Lock feature is enabled, your
phone only works with the current SIM. You
must enter the SIM lock code.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
Once you have entered a new PIN, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
Phone Lock
When the Phone Lock feature is enabled, the
phone is locked and you must enter the 8-digit
phone password each time the phone is switched
on.
FDN Mode
The FDN (Fixed Dial Number) mode, if supported
by your SIM card, allows you to restrict your
outgoing calls to a limited set of phone numbers.
The password is factory set to “00000000.” To
change the phone password, refer to the
Change Password menu option (Menu 4.6.4)
on the following page.
81
80
Phone Settings
Phone Settings
The following options are available:
2. Adjust the brightness using the
and
keys or the
phone.
and
keys on the left side of the
Disable: you can phone any number.
Enable: you can only call phone numbers stored
in the phonebook. You must enter your PIN2.
3. When you are satisfied, press the OK soft key
to save the selection.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option is not
displayed.
Back Light
You can select whether or not the phone uses
the backlight. A marginal increase in
standby/talk time can be achieved by turning the
backlight off.
To change your PIN2, refer to the Change PIN2
menu option (Menu 4.6.7) below.
Change PIN2
The following options are available:
The Change PIN2 feature allows you to change
your current PIN2 to a new one. You must enter
the current PIN2 before you can specify a new
one.
OFF: the backlight is not used.
Short: the backlight comes on when you press a
key or receive a call and switches off 10 seconds
after the last key is pressed.
Once you have entered a new PIN2, you are
asked to confirm it by entering it again.
Long: the backlight comes on when you press a
key or receive a call and switches off 20 seconds
after the last key is pressed.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Auto Light
LCD Settings (Menu 4.7)
Using this feature, you can specify the time for
which the backlight is to be used. This feature is
helpful for conserving your battery power.
Contrast
This option allows you to adjust the contrast of
each display screen to make them lighter or
darker.
The following options are available:
Disable: the backlight is used according to the
setting in the Back Light menu option (Menu
4.7.2); see above.
To adjust the display contrast:
Enable: the backlight is used only during the
specified period of time. Set the required length
of time in hours and minutes, using the
appropriate number keys.
1. Select the required display Main LCD or
Front LCD, and press the Select soft key.
83
82
Phone Settings
Phone Settings
Active Folder: when this option is checked, you
can simply open the folder to answer a call.
When it is unchecked, you must open the folder
and press a key, depending on the setting of the
Anykey Answer option (see below).
Graphic Logo
This option allows you to display your operator’s
logo instead of its name.
Off: the operator name is displayed in idle
mode.
Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
On: the operator logo stored in your phone is
displayed in idle mode; if no logo has been
stored, the operator name is displayed.
key, except the
key. To reject the call, press the
key and the Reject soft
key or the
Reject soft key.
When it is unchecked, you can only press the
key or Accept soft key.
Extra Settings (Menu 4.8)
Auto Folder: when this option is checked, you
can easily open and close the folder by pressing
the key on the right side of the phone.
You can turn the functions for automatic
redialling or answering on or off.
Notes:
To turn a given
tone...
Press the...
• Using the Auto Folder feature drains your battery
power, so that you will have less talk time and
standby time.
On
ON soft key.
• When the battery is low, the auto folder key may
not function. You need to manually open or close
the folder.
• Do not disturb the folder while it is automatically
opening or closing. This may cause damage to
the motor.
A check mark is displayed
in front of the option.
Off
OFF soft key.
The check mark is no
longer displayed.
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a
phone number after an unsuccessful call.
Note: The interval between two call attempts
varies.
85
84
Phone Settings
Phone Settings
Short Cut (Menu 4.9)
Reset Settings (Menu 4.10)
The navigation keys can be used as shortcut
keys. In idle mode, they allow you to access the
specific menu options directly.
You can easily reset your phone to its default
configuration.
1. Select the Reset Settings menu option.
To assign a shortcut to a key:
2. Enter the 8-digit phone password and press
1. Select the key to be used as a shortcut key
the OK soft key.
by pressing the
or
key.
Note: The password is preset to “00000000.” To
• Key up (
)
change this password, refer to page 81.
• Key down (
)
• Key right (
)
• Key left (
)
2. Select the menu option to be assigned to the
key by pressing the or key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the
selection.
87
86
Organiser
Organiser
Writing a Memo
The Organiser feature enables you to:
• View the calendar and organise your schedule.
• Define a list of things to do.
• Set the current date and time.
• Set the alarm so that the phone rings at a
specific time (to remind you of an appointment
for example).
• Use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
To write or edit a memo on a specific date:
1. Select the required date in the calendar, using
the navigation keys.
Note: To skip to the previous or next month,
press the
of the phone.
and
keys on the left side
2. Press the Select soft key.
An empty memo screen is displayed to allow
you to enter your memo.
Calendar (Menu 5.1)
3. Enter your memo and then press the OK soft
With the Calendar feature, you can:
• Consult the calendar.
key.
Note: For further details about how to enter
• Write memos to keep track of your schedule
and trigger an alarm, if necessary.
characters, refer to page 43.
You are asked if you wish to set an alarm.
Consulting the Calendar
4. To set an alarm to ring on the chosen day,
press the Yes soft key.
When you select the Calendar menu option
(Menu 5.1), the calendar is displayed. The
following options are available when you press
the Options soft key.
Otherwise, press the No soft key.
5. If you pressed the Yes soft key, set the time
for the alarm and press the OK soft key.
The colour of the date on the calendar is
changed to green to indicate that a memo
exists.
Search all: displays all memos set, regardless
of the day and starting with the oldest. To scroll
through the memos, press the
or
key.
Delete all: allows you to delete all memos. You
are asked to confirm your action.
Editing a Memo
If you select a day for which a memo already
exists, you can press the Edit soft key to edit
the displayed memo.
Go to date: allows you to jump to a specific
date.
Exit: exits the Calendar feature and returns to
the idle mode.
Note: For further details about how to enter
characters, refer to page 43.
89
88
Organiser
Organiser
Editing the To Do List
Once you have finished editing the memo, press
the OK soft key. The following options are then
available when you press the Options soft key.
If tasks are already defined in the To Do List
when you select the To Do List menu option
(Menu 5.2), the current contents are displayed
with a status check mark and priority;
high, for normal or for low.
Alarm: allows you to set the alarm to ring on
the chosen day.
for
Erase: allows you to delete the memo.
The following options are available:
Copy to: allows you to copy the memo to
another date and/or time.
To...
Then...
Move to: allows you to change the date and/or
time of the memo.
view the details
for a specific task
• Highlight the task.
• Press the View soft key.
change the status • Highlight the task.
of a specific task
• Press the
key to mark
To Do List (Menu 5.2)
the task as completed as
of the current date and
time.
This feature allows you to:
or
• Draw up a list of tasks to be done.
• Highlight the task.
• Press the Options soft key.
• Select the Mark option.
• Select the appropriate
status from Done and
Undo.
• Assign a priority and deadline to each task.
• Sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
create a new
task
• Press the Options soft key.
• Select the New option.
• Enter the text, priority and
deadline for the task.
Note: For further details about how to enter
characters, see page 43.
edit an existing
task
• Highlight the task.
3. Press the Select soft key.
• Press the Options soft key.
• Select the Edit option.
• Change the text, priority
and deadline for the task.
4. Select high, normal or low priority using the
and
key.
keys and press the Select soft
5. Enter your deadline and press the OK soft
key.
If you do not want to set deadline, press the
Skip soft key.
91
90
Organiser
To...
Organiser
Time & Date (Menu 5.3)
Then...
sort the existing
tasks by priority
or status
• Press the Options soft key.
• Select the Sort option.
• Select the sort criterion
from High, Low, Done and
Undo.
This option allows you to change the current
time and date displayed. You can also check the
current time for Greenwich Mean Time (GMT)
and 21 major cities around the world.
The following options are available:
copy a task
• Highlight the task.
Set Time: allows you to enter the current time.
You can choose the time format via the Time
Format menu option (Menu 5.3.4).
• Press the Options soft key.
• Select the Copy option.
• Change the text, priority
and deadline for the task as
needed.
Note: Before setting the time, you must specify
your time zone, via the World Time menu
option (Menu 5.3.3).
copy a task to
the calendar
• Highlight the task.
• Press the Options soft key.
• Select the Copy to
calendar option.
Set Date: allows you to enter the day, month
and year.
• Change the text and
deadline for the task and
set alarm as needed.
World Time: allows you to check the current
time for Greenwich Mean Time (GMT) and 21
major cities around the world, using the
keys.
and
delete a task
• Highlight the task.
• Press the Options soft key.
• Select the Delete option.
The screen shows the:
• City name.
delete all tasks
• Press the Options soft key.
• Select the Delete all
option.
• Confirm the deletion by
pressing the OK soft key.
• Current date and time.
• Time difference between the selected city and
your city if you have set the local time (see
below for further details) or GMT (by default).
To select your time zone:
1. Select the city corresponding to your time
zone by pressing the
times.
or
key one or more
The local date and time are displayed.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
93
92
Organiser
Organiser
Alarm (Menu 5.4)
While setting or viewing an alarm, the following
options are available when you press the
Options soft key.
This feature allows you to:
• Set an alarm to ring at a specific time.
Remove Alarm: deactivates the current alarm.
• Set the phone to switch on automatically and
ring the alarm even if the phone is switched off
(the Auto Power menu option set to Enable).
Alarm Sound Set: allows you to select the
alarm melody.
The following options are available:
Calculator (Menu 5.5)
Once Alarm: the alarm rings only once and is
then deactivated.
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions; addition, subtraction,
multiplication and division.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up
in the morning.
Using the Calculator
To set the alarm:
1. Enter the first number using the numeric
keys.
1. Choose the type of the alarm to be set.
2. Enter the required time and press the OK soft
2. Press the right soft key until the required
key.
arithmetic symbol appears: + (add), -
(subtract),
(multiply), / (divide).
3. If you select Morning Call in step 1, select
Monday to Friday or Monday to Saturday
and press the OK soft key.
3. Enter the second number.
4. Repeat Steps 2 to 3 as many times as
needed.
Remove Alarm: deactivates all alarm settings.
Auto Power: when this option is set to Enable,
the phone will automatically turn on at the
specified time and the alarm will ring.
Notes:
• To erase any mistakes and clear the display, press
the C key.
• To include a decimal point or a bracket, press the
left soft key until the required symbol is
displayed.
If this menu option is set to Disable and the
phone is switched off at the specified time, the
alarm will not ring.
5. To get the result, press the
key.
To stop the alarm when it rings, open the folder
and press the Exit soft key.
95
94
Organiser
Network Services
These menu functions are network services.
Please contact your service provider to check
their availability and subscribe to them, if you
wish.
Currency Exchange (Menu 5.6)
Using this menu option, you can make currency
conversions.
1. Enter the current exchange rate of your
source currency and press the OK soft key.
Call Diverting (Menu 6.1)
You can insert a decimal point by pressing the
key.
This network service enables incoming calls to
be rerouted to the number that you specify.
2. Enter the amount for which you want to
conduct the currency conversion and press
the OK soft key.
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
The exchange rate and equivalent value are
displayed.
Call diverting can be set up in the following ways:
Divert Always: all calls are diverted.
3. Press the Exit soft key to exit the currency
Busy: calls are diverted if you are already
making another call.
convertor.
No Reply: calls are diverted if you do not
answer.
Unreachable: calls are diverted if you are not
in an area covered by your service provider.
Cancel All: all call diverting options are
cancelled.
You can specify individual diverting options for
each of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
Example: You can:
• Systematically divert fax calls to
your office fax machine.
• Divert voice calls to your colleague if
you are already using the phone.
97
96
Network Services
Network Services
Call Barring (Menu 6.2)
To set your call diverting options:
The call barring network service allows you to
restrict your calls.
1. Select the required type of call diverting by
pressing the
or
key and then press the
Select soft key.
Call barring can be set up in the following ways:
2. Select the type of calls to be diverted by
All Outgoing: calls cannot be made.
pressing the
or
key and then press the
International: international calls cannot be
made.
Select soft key.
The current status is displayed. If the option
has already been set, the number to which
the calls are diverted is displayed.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that
is the country where your home network
provider is located.
3. To...
Press the...
activate call
diverting
Activate soft key and
go to Step 4.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be
received when you are using your phone outside
your home service area.
change the call
number
Change soft key and
go to Step 4.
deactivate call
diverting
Remove soft key.
Cancel All: all call barring settings are
deactivated; calls can be made and received
normally.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
You can specify individual barring options for
each of the following call types:
To enter an international code, press the 0
key until the + sign is displayed.
• Voice calls only
• Fax calls only
• Data calls only
The phone sends your settings to the network
and the network’s acknowledgment is
displayed.
To set your call barring options:
1. Select the required type of call barring by
You can deactivate all of the call diverting
settings by selecting the Cancel All option.
pressing the
or
key and then press the
Select soft key.
2. Select the type of calls to be barred by
pressing the
or
key and then press the
Select soft key.
99
98
Network Services
Network Services
Call Waiting (Menu 6.3)
3. Press the Activate soft key to confirm your
settings.
This network service enables you to be informed
when someone is trying to reach you during
another call.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgment is
displayed.
To set the call waiting option:
1. Select the Voice Calls option and press the
Select soft key.
To deactivate specific call barring settings:
The screen informs you whether call waiting
is activated or deactivated.
1. Select the call barring option to be deactivated.
Note: Additional call types may be available
2. Select the type of call to which this option
applies.
depending on your SIM card.
2. You can activate or deactivate the call waiting
feature as necessary, by using the Activate
or Deactivate soft key respectively.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
To return to the previous screen, press the
Exit soft key.
The phone sends your settings to the network
and the network’s acknowledgment is
displayed.
You can also deactivate the call waiting setting
by selecting the Cancel All option.
You can also deactivate all call barring settings
by selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can
specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
101
100
Network Services
Network Services
Network Selection (Menu 6.4)
Caller ID (Menu 6.5)
The Network Selection feature enables you to
indicate whether the network used when
roaming outside your home area is selected
automatically or manually.
You can prevent your phone number from being
displayed on the phone of the person being
called.
Note: Some networks do not allow the user to
change this setting.
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
The following options are available:
Default: the default setting provided by the
network is used.
To indicate whether the network is to be selected
automatically or manually when roaming:
Hide Number: your number is not displayed on
the other person’s phone.
1. When Network Selection is displayed, press
the Select soft key.
Send Number: your number is sent each time
you make a call.
2. Press the
or
key until the appropriate
option is highlighted and then press the OK
soft key.
Closed User Group (CUG) (Menu 6.6)
If you select Automatic, you are connected
to the first available network when roaming.
This network service allows incoming and
outgoing calls to be restricted to a selected user
group. You may be a member of up to ten user
groups.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press the
or
key until the preferred
network is highlighted and then press the OK
soft key.
For details about how to create, activate and use
a closed user group, contact your service
provider.
You are connected to that network.
Example: A company lends SIM cards to its
employees and wants to restrict
outgoing calls to members of the same
team.
The following options are available:
Index List: lets you list, add or delete CUG
index numbers. The list of current CUG indexes
appears.
103
102
Network Services
Fun Box
Add a new CUG index as advised by your service
provider or delete a selected group.
The Fun Box menu contains several fun options.
To...
Press the...
or key.
Games (Menu 7.1)
scroll through
the existing
CUG indexes
You can enjoy three games with your phone.
add a new CUG Options soft key, select the
Scroll to the desired game using the
keys and press the Select soft key.
and
index
Add option and enter the
index.
The options for the game is displayed. To select
an option, press the corresponding number key.
The following options are available:
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Newgame: starts a new game.
HighScore: shows the highest scores list. Up to
5 gamers can be ranked. Not all games have this
option.
Outside Access: lets you enable or disable calls
to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check
with your service provider.
Key Info.: provides you the help screen,
illustrating the key operation in the game.
Continue: allows you to continue the game you
previously saved. This option is available only
when you saved a game.
Default Group: you may set a default CUG with
your service provider. If you have done so, you
can enable the Default Group option on your
phone. When making a call, you will be given
the option of using your default CUG, instead of
selecting one from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
105
104
Fun Box
Fun Box
WAP Browser (Menu 7.2)
To...
Then...
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to
access and navigate the Wireless Web via your
phone.
select a numbered
item
press the corresponding
numeric key.
return to the
previous page
press the Back soft key or
the C key.
Home
return to the
startup homepage
select the Home menu
option; for more
information about this
option, refer to page 108.
Selecting this option connects the phone to the
network and loads the homepage of the Wireless
Web service provider.
The content of the WAP Browser startup
homepage depends on your Wireless Web
service provider. To scroll through the screen,
Entering Text, Numbers or Symbols
When you are prompted to enter text, the
current text entry mode is indicated on the
screen. The following modes are available:
use the
and
keys.
Note: To access the startup homepage from any
other screen in the WAP browser, use the
Home option. For more information on the
WAP Browser menus, refer to page 108.
allows you to enter various symbols and
SYM:
punctuation marks. To scan through the symbol
list, use the navigation keys. When the desired
symbol is selected, press the left soft key
Using the Soft Keys
A bar containing browser commands is located
at the bottom of the WAP browser display. The
123: allows you to enter numbers.
soft keys (
) below the bar are used to
ABC: allows you to enter letters in the alphabet.
Press the corresponding key until the required
letter is displayed. You can change the case by
execute these commands. The two keys are
called soft keys because their function changes
depending on the WAP browser application in
use.
pressing the
key.
• ABC: Initial capitalize. After entering a word,
the case automatically changes to abc mode.
• abc: Lower case.
Navigating the WAP Browser
To...
Then...
• +ALPH: Upper case.
scroll through
and select
browser items
press the
until the symbol
to the required item, and
then press the OK soft key
to confirm the selection.
or
keys
points
107
106
Fun Box
Fun Box
To...
Then...
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Change modes
Enter a space
Press the right soft key.
Exit: lets you exit the current browser.
Press the
key.
key.
Switch between Press the
upper and lower-
case
Mark Site: allows you to set a bookmark for most
pages so that you can access them directly from
any web page.
Edit text
Set the cursor to the right of
the character to be corrected.
Bookmarks: allows you to load a bookmarked
Web page directly.
Press the C key as required
and enter the correct
character(s).
Inbox: displays all of the web alerts.
Save Image: allows you to save the displayed
image on the current page. you can see the
saved image in Pictures of the Downloads
menu option (Menu 7.3).
Exiting the WAP Browser
To exit the browser at any time, simply press the
key.
Reload: reloads the current page.
Settings: gives you access to the following
setting features.
Selecting and Using Browser Menu Options
Homepage: you can change the startup
homepage manually.
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
Proxy:allows you to change the proxy server to
the desired one without ending the current wap
session establishment.
To access a menu option:
1. Press and hold down the
A menu displays.
key.
Circuit Prompt: allows you to set the prompt
confirming your selection to display each time
you access a site without wap session
establishment. Select ON to display the
confirming window, or OFF not to display.
2. Highlight the required menu option by
pressing the or key.
3. Select the option by pressing the
key.
soft
Circuit Linger: allows you to set how long the
phone waits for before ending the attempt for
connection when there is no answer from the
network. It is preset to 60 sec.
4. If necessary, select the secondary option
using the and keys, and press the
key.
soft
Scroll Mode: lets you select the scroll mode
between Block and Smooth.
Note: The menus may vary, depending on your
version of the WAP browser.
Scroll Speed: allows you to set the speed for
scrolling to the next screen. You can select Fast,
Medium, and Slow.
The following menu options are available:
Back: reloads the previous page in the history.
109
108
Fun Box
Fun Box
Key Press Timeout: allows you to set how fast
the phone recognises your selection with one
keypress. You can select Fast, Medium, and
Slow.
http://
This options allows you to manually enter the
URL address of the Web site that you wish to
access. You can access this menu directly by
pressing and holding the
WAP browser.
Security: displays all information about security,
such as Connection Prompt, Secure Prompt,
Current Certificate, CA Certificates, and
Encryption.
key down in the
Setting
Advanced: displays the current URL address,
restarts the browser without exiting it, and
allows you to delete a site from the offline
services list.
This option allows you to set up five proxy
servers for the WAP browser. Contact your
service provider for details about setting options.
About: provides you with information about the
version of the Mobile Browser software and the
WIM (WAP Identity Module).
For each server, the following options are
available:
Profile Name: Enter a name that you wish to
assign to the HTTP proxy server.
Favorite
This option allows you to store the URL
addresses of your favourite Web sites. You can
access this menu directly by pressing and
Homepage URL: Set the address of your
startup homepage. When the default homepage
is displayed, you can delete it using the C key
and enter your own choice.
holding down the
Browser.
key while using the WAP
Security: Set to desired data transmission
mode. Choose Secure to protect your data
against unauthorised access; otherwise, choose
Non-secure.
To store a URL address:
1. Select an empty location and press the
Options soft key.
2. Enter the address and press the Enter soft
IP Address: WAP gateway address required to
connect to the Internet.
key.
3. Enter a name for the favourite item and press
Login Name: Set the PPP server login ID.
Password: Set the PPP server password.
Dial-up Number: PPP server phone number.
the Enter soft key.
After saving favourite items, you can use the
following options by pressing the Options soft
key:
Data Call Type: Data call type: Analogue or
Goto URL: quickly accesses you to the site.
Edit: allows you to edit the selected address.
Erase: deletes the selected address.
ISDN.
Note: The WAP browser settings may vary,
depending on the service provider. Contact
your service provider for further information.
111
110
Fun Box
Solving Problems
Clear Cache
Before contacting the after-sales service,
perform the following simple checks. They may
save you the time and expense of an
unnecessary service call.
You can clear the information stored in the
cache, the phone’s temporary memory which
stores the most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
When you switch your phone on, the
following messages may appear
Insert SIM Card
Downloads (Menu 7.3)
• Check that the SIM card is correctly installed.
You can view the items you downloaded from
the wireless web.
Phone Locked Enter Password
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
Sounds
In this menu, you can view the list of sounds
downloaded from the server. You can set the
downloaded sounds as the current ring tone, but
cannot send the sounds to other phones.
Enter PIN
• You are using your phone for the first time.
You must enter the Personal Identification
Number supplied with the SIM card.
When the memory is full, a warning message is
displayed and the phone rejects additional
sounds until you erase obsolete ones.
• The PIN Check feature is enabled. Every time
the phone is switched on, the PIN have to be
entered. To disable the feature, use the PIN
Check menu option (Menu 4.6.1).
Pictures
Enter PUK
In this menu, you can view the list of pictures
downloaded from the server. You can set the
downloaded pictures as the current background
image, but cannot send them to other phones.
• The PIN code was entered incorrectly three
times in succession and the phone is now
blocked. Enter the PUK supplied by your
network operator.
When the memory is full, a warning message is
displayed and the phone rejects additional pictures
until you erase obsolete ones.
113
112
Solving Problems
Solving Problems
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
“No service,” “Network failure” or
“Not done” is displayed
• The network connection was lost. You may be
in a weak signal area (in a tunnel or
surrounded by buildings). Move and try again.
• The battery is insufficiently charged. Replace
the battery and recharge it.
• You are trying to access an option for which
you have not taken out a subscription with
your service provider. Contact the service
provider for further details.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
signal strength from strong (
); the number of bars indicates the
) to weak ( ).
You have entered a number but it was
not dialled
• Try moving the phone slightly or moving closer
to a window if you are in a building.
• Have you pressed the
key?
• Are you accessing the right cellular network?
No number is dialled when you recall a
phonebook entry
• You may have set an outgoing call barring
option.
• Check that the number has been stored
correctly, by using the Phonebook Search
feature.
Your correspondent cannot reach you
• Re-store the number, if necessary.
• Is your phone switched on (the
pressed for more than one second)?
key
• Are you accessing the right cellular network?
If the above guidelines do not help you to solve
the problem, take a note of:
• You may have set an incoming call barring
option.
• The model and serial numbers of your phone
• Your warranty details
Your correspondent cannot hear you
speaking
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
• Have you switched off the microphone?
• Are you holding the phone close enough to
your mouth? The microphone is located at the
bottom of the phone.
115
114
Access Codes
Access Codes
PIN
There are several access codes that are used by
your phone and its SIM card. These codes help
you protect the phone against unauthorised use.
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the OK soft key. If you
make a mistake, press the C key one or more
times until the incorrect digit is cleared and then
continue entering the correct code.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be
used until you re-enable it by entering the PUK
(see below).
To...
Refer to...
The access codes, except for the PUK (PIN
Unblocking Key) and PUK2 codes can be
changed using Security menu options (Menu
4.6). See page 79 for further details.
activate/deactivate the page 80
PIN Check feature
change the PIN
(menu option 4.6.1).
page 80
Important! Avoid using access codes
resembling emergency numbers,
such as 112, so that you do not dial
an emergency number accidentally.
(menu option 4.6.2)
PUK
The 8-digit PUK (Pin Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
Phone Password
The Phone Lock feature uses the phone
password to protect your phone against
unauthorised use. The phone password is
supplied with the phone and is factory set to
“00000000.”
To re-enable your PIN:
1. Key in the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the
To...
Refer to...
OK soft key.
activate/deactivate the page 80
3. When the Confirm New PIN message is
displayed, key in the same code again and
press the OK soft key.
Phone Lock feature
(menu option 4.6.3).
change the phone
password
page 81
(menu option 4.6.4).
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid.
Contact your service provider for a new card.
117
116
Access Codes
Access Codes
Barring Password
PIN2
The 4-digit barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function. See page 100 for
further details.
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions,
such as setting the maximum cost of a call.
These functions are available if supported by
your SIM card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, refer to page 82 (menu
option 4.6.7).
PUK2
The 8-digit PUK2 (Pin Unblocking Key 2),
supplied with some SIM cards, is required to
change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press
the OK soft key.
3. When the Confirm PIN2 message is
displayed, key in the same code again and
press the OK soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your
service provider for a new card.
119
118
Health and Safety Information
Health and Safety
Information
SAR tests are conducted using standard
Exposure to Radio-Frequency
Energy (SAR Information)
operating positions with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
determined at the highest certified power level,
the actual SAR level of the phone while
operating can be well below the maximum value.
This is because the phone is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In general,
the closer you are to a base station, the lower
the power output of the phone.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as
not to exceed the limits for exposure to radio-
frequency (RF) energy, as recommended by the
EU Council. These limits are part of
comprehensive guidelines and establish
The highest SAR value for this model phone
when tested for compliance against the standard
was 0.434W/kg. While there may be differences
between the SAR levels of various phones and
various positions, they all meet the EU
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all
persons, regardless of age and health.
requirements for RF exposure.
The exposure standard for mobile phones
employs a unit of measurement known as SAR
(Specific Absorption Rate). The SAR limit
recommended by the EU Council is 2.0W/kg.*
*: The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten gram of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account
for any variations in measurements. The SAR values may
vary depending on national reporting requirements and the
network band.
121
120
Solving Problems
Health and Safety Information
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter
Precautions When Using Batteries
conditions, as you will reduce the capacity and
life-time of the battery. Always try to keep the
battery at room temperature. A phone with a
hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion
batteries are particularly affected by
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
temperatures below 0 °C (32 °F).
• If you use the phone near the network’s base
station, it uses less power; talk and standby
time are greatly affected by the signal strength
on the cellular network and the parameters set
by the network operator.
• Do not short-circuit the battery. Accidental
short circuiting can occur when a metallic
object (coin, clip or pen) causes a direct
connection between the + and - terminals of
the battery (metal strips on the back of the
battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the
object causing the short-circuit.
• Battery charging time depends on the
remaining battery charge and the type of
battery and charger used. The battery can be
charged and discharged hundreds of times, but
it will gradually wear out. When the operation
time (talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in
use, disconnect it from the power source. Do
not leave the battery connected to a charger
for more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
123
122
Health and Safety Information
Health and Safety Information
Road Safety
6. Dial sensibly and assess the traffic; if
possible, place calls when you are not moving
or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need
to make a call while moving, dial only a few
numbers, check the road and your mirrors,
then continue.
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
the people with whom you are talking aware
that you are driving and suspend
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
conversations that have the potential to divert
your attention from the road.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place
your call without taking your attention off the
road.
8. Use your wireless phone to call for help. Dial
the emergency number in the case of fire,
traffic accident or medical emergencies.
Remember, it is a free call on your wireless
phone!
2. When available, use a hands-free device. If
possible, add an extra layer of convenience
and safety to your wireless phone with one of
the many hands-free accessories available
today.
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime
in progress or other serious emergency where
lives are in danger, call the emergency
number, as you would want others to do for
you.
3. Position your wireless phone within easy
reach. Be able to access your wireless phone
without removing your eyes from the road. If
you get an incoming call at an inconvenient
time, let your voice mail answer it for you.
10. Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be
stolen, call roadside assistance or any other
special non-emergency wireless number.
4. Let the person you are speaking with know
you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice and even
heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your phonebook takes your
attention away from your primary
responsibility, driving safely.
125
124
Health and Safety Information
Health and Safety Information
Operating Environment
Persons with pacemakers:
• Should always keep the phone more than 15
cm (6 inches) from their pacemaker when the
phone is switched on
Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or
when it may cause interference or danger.
• Should not carry the phone in a breast pocket
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that
interference is taking place, switch off your
phone immediately.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the normal
operating position (held to your ear with the
antenna pointing over your shoulder).
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss alternatives.
Electronic Devices
Other Medical Devices
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be
shielded against the RF signals from your
wireless phone. Consult the manufacturer to
discuss alternatives.
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy. Your physician may be able
to assist you in obtaining this information.
Switch off your phone in health care facilities
when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with
the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research.
127
126
Health and Safety Information
Health and Safety Information
Emergency Calls
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
This phone, like any wireless phone, operates
using radio signals, wireless and landline
networks as well as user-programmed functions,
which cannot guarantee connection in all
conditions. Therefore, you should never rely
solely on any wireless phone for essential
communications (medical emergencies, for
example).
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Remember, to make or receive any calls the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services
and/or phone features are in use. Check with
local service providers.
Switch off your phone in any facility where
posted notices require you to do so.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your
present location (for example, 999 or other
official emergency number). Emergency
numbers vary by location.
Users are advised to switch off the phone while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants
or where blasting operations are in progress.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency
call. Consult this document and your local
cellular service provider.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include below deck on boats, chemical transfer
or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane),
areas where the air contains chemicals or
particles, such as grain, dust or metal powders,
and any other area where you would normally be
advised to turn off your vehicle engine.
When making an emergency call, remember to
give all the necessary information as accurately
as possible. Remember that your phone may be
the only means of communication at the scene
of an accident; do not cut off the call until given
permission to do so.
129
128
Health and Safety Information
Health and Safety Information
Other Important Safety Information
Care and Maintenance
• Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Keep the phone and all its parts and
accessories out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity
and liquids contain minerals that will corrode
electronic circuits.
• Do not store or carry flammable liquids, gases
or explosive materials in the same
compartment as the phone, its parts or
accessories.
• Do not touch the phone with wet hands while
it is charging. Doing so may give you an
electric shock or damage the phone.
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including both
installed or portable wireless equipment in the
area over the air bag or in the air bag
deployment area. If wireless equipment is
improperly installed and the air bag inflates,
serious injury could result.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Switch off your phone before boarding an
aircraft. The use of wireless phones in aircraft
may be dangerous to the operation of the
aircraft, and is illegal.
• Do not store the phone in cold areas. When
the phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
• Failure to observe these instructions may lead
to the suspension or denial of telephone
services to the offender, or legal action, or
both.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents
or strong detergents to clean the phone. Wipe
it with a soft cloth slightly dampened in a mild
soap-and-water solution.
131
130
Health and Safety Information
Glossary
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
To help you understand the main technical terms
and abbreviations used in this booklet and take
full advantage of the features on your mobile
phone, here are a few definitions.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a
radiator. The phone may explode when
overheated.
Active Folder
Ability to answer a call simply by opening the
folder cover.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas
or modified accessories may damage the
phone and violate regulations governing radio
devices.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
• If the phone, battery, charger or any accessory
is not working properly, take it to your nearest
qualified service facility. The personnel there
will assist you, and if necessary, arrange for
service.
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while
answering or making another call; you can then
switch between the two calls, as required.
Call Waiting
Ability to inform users that they have an
incoming call when engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block
the telephone numbers of callers.
DCS
Digital cellular network standard based on the
GSM network architecture. With the higher
frequency range (1800 MHz for DCS instead of
900 MHz for GSM), more radio channels can
be made available, thus allowing the network
to support more subscribers and traffic.
133
132
Glossary
Glossary
Dual Band
Roaming
Ability to operate with both DCS (1800 MHz)
and GSM (900 MHz) networks. The phone
automatically uses the network with the
strongest signal and even switches networks
during a call within the same operator’s
network.
Use of your phone when you are outside your
home area, when travelling for example.
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services,
such as voice mail, directory inquiries, customer
support and emergency services.
GSM (Global System for Mobile
Communication)
International standard for cellular
SIM (Subscriber Identification Module)
communication, guaranteeing compatibility
between the various network operators. GSM
covers most European countries and many other
parts of the world.
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small
slot on the back of the phone and is protected
by the battery.
Multiparty Calling
Ability to establish a conference call involving up
to five additional parties.
SMS (Short Message Service)
Network service sending and receiving messages
to and from another subscriber without having to
speak to the correspondent. The message
created or received can be displayed, received,
edited or sent.
Phone Password
Security code used to unlock the phone when
you have selected the option to lock it
automatically each time it switches on.
PIN (Personal Identification Number)
Soft Keys
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a
four to eight-digit number and can be changed,
as required.
Two keys marked
purpose of which:
and
on the phone, the
• Varies according to the function that you are
currently using.
• Is indicated on the bottom line of the display
just above the corresponding key.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Voice Mail
Computerised answering service that
automatically answers your calls when you are
not available, plays a greeting (optionally in your
own voice) and records a message.
135
134
137
136
138
|