Nokia Cell Phone E51 1 User Manual

E51 User Guide  
Issue 2  
Export controls  
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to  
law is prohibited.  
FCC/INDUSTRY CANADA NOTICE  
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or Industry Canada  
can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device  
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved  
by Nokia could void the user's authority to operate this equipment.  
Model number: E51-1 (RM-244) or E51-2 (RM-426)  
Issue 2  
Contents  
Select ringing tones.........................................................24  
Customise profiles...........................................................25  
Change the display theme..............................................25  
Download a theme..........................................................25  
3-D ringing tones.............................................................26  
Volume control....................................................................26  
One-touch keys...................................................................26  
Home key..........................................................................26  
Contacts key......................................................................27  
Calendar key.....................................................................27  
E-mail key.........................................................................27  
Multitasking.........................................................................27  
Memory................................................................................27  
Free memory....................................................................27  
Memory card.....................................................................28  
MicroSD...........................................................................28  
Insert the memory card................................................28  
Use a memory card.......................................................28  
Eject the memory card..................................................29  
Write text.............................................................................29  
Traditional text input......................................................29  
Predictive text input........................................................30  
Change the writing language.........................................30  
Antennas..............................................................................30  
Further information...........................................................31  
For your safety ...............................................10  
About your device...............................................................11  
Network services................................................................11  
Enhancements, batteries, and chargers...........................12  
Get started......................................................13  
Insert the SIM card and battery.........................................13  
Charge the battery..............................................................14  
Keys and parts.....................................................................15  
Connect the headset...........................................................16  
Attach the wrist strap.........................................................16  
First start-up........................................................................16  
Lock the keys.......................................................................17  
Display indicators...............................................................17  
Nokia support and contact information...........................19  
Welcome..............................................................................20  
Settings wizard...................................................................20  
Standby modes...................................................................21  
Active standby..................................................................21  
Standby.............................................................................21  
Menu....................................................................................21  
Common actions in several applications..........................22  
Transfer................................................................................23  
Transfer content between devices.................................23  
View transfer log..............................................................23  
Synchronise, retrieve, and send data............................24  
Personalisation...................................................................24  
Profiles..............................................................................24  
Business communications..............................32  
Telephone............................................................................32  
Voice calls.........................................................................32  
Answer a call..................................................................32  
Make a call.....................................................................32  
Make a conference call..................................................33  
Fax calls..........................................................................33  
Send business cards.........................................................42  
Manage received business cards....................................42  
SIM directory.....................................................................42  
Video calls.........................................................................33 Calendar...............................................................................43  
Make a video call...........................................................33  
Share a video.................................................................34  
Receive a video sharing invitation..............................34  
Net calls.............................................................................34  
Create a net call profile.................................................35  
Connect to the net call service.....................................35  
Make net calls................................................................35  
Net call service settings................................................36  
Speed dialling...................................................................36  
Call divert..........................................................................36  
Create calendar entries...................................................43  
Create a meeting entry....................................................44  
To-do entries....................................................................44  
Calendar views.................................................................45  
Work in different views................................................45  
Month view....................................................................45  
Week view.....................................................................45  
Day view.........................................................................45  
To-do view.....................................................................45  
Calendar settings.............................................................46  
Call barring.......................................................................37 Web......................................................................................46  
Bar net calls......................................................................37  
Send DTMF tones..............................................................37  
Voice mail.........................................................................38  
Voice aid..............................................................................38  
Voice commands.................................................................38  
Make a call........................................................................39  
Launch an application.....................................................39  
Voice command settings.................................................39  
Connection security.........................................................46  
Browse the web...............................................................46  
Bookmarks........................................................................47  
Clear the cache.................................................................47  
Feeds and blogs...............................................................47  
End a connection..............................................................47  
Web settings.....................................................................47  
Messaging.......................................................48  
Log........................................................................................39 Messaging folders...............................................................48  
Call and data registers.....................................................40 Organise messages.............................................................49  
Monitor all communications...........................................40 Message reader...................................................................49  
Call and send messages from Log..................................40 Speech..................................................................................49  
Log settings......................................................................40  
Edit the voice properties ................................................49  
Contacts...............................................................................40 E-mail messages.................................................................49  
Copy contacts between SIM and device memory.........41  
Manage contacts..............................................................41  
Manage contact groups...................................................42  
Add ringing tones for contacts.......................................42  
Set up your e-mail with the mailbox guide..................50  
Connect to a remote mailbox.........................................50  
Read and reply to e-mail.................................................51  
Write and send e-mail.....................................................51  
Delete messages..............................................................52 Active notes.........................................................................62  
Subfolders in your remote e-mail..................................52  
Text messages.....................................................................52  
Create and edit notes......................................................62  
Settings for Active notes.................................................62  
Write and send text messages.......................................52 Search..................................................................................63  
Sending options for text messages................................53  
Text messages on the SIM card......................................53  
Search for information ...................................................63  
Search results...................................................................63  
View picture messages....................................................53 Calculator.............................................................................63  
Forward picture messages..............................................53 File manager.......................................................................63  
Multimedia messages.........................................................54 Quickoffice...........................................................................64  
Create and send multimedia messages.........................54  
Work with files.................................................................64  
Receive and reply to multimedia messages..................55 Nokia Team suite................................................................64  
Create presentations.......................................................55  
View presentations..........................................................56  
View and save multimedia attachments.......................56  
Forward a multimedia message.....................................56  
Work with teams.............................................................64  
Edit teams.........................................................................65  
Nokia Team Suite settings..............................................65  
Action bar settings...........................................................65  
Send a sound clip.............................................................56 Converter.............................................................................66  
Sending options for multimedia messages..................57  
Special message types.......................................................57  
Convert measurements...................................................66  
Set base currency and exchange rate............................66  
Service messages.............................................................57 Zip manager........................................................................66  
Send service commands..................................................57 PDF reader...........................................................................67  
Messaging settings.............................................................58  
Text message settings.....................................................58  
Multimedia message settings.........................................58  
Print files...........................................................................67  
Printing options...............................................................67  
Printer settings................................................................67  
E-mail account settings...................................................59 Clock.....................................................................................68  
Connection settings......................................................59  
User settings..................................................................59  
Retrieval settings..........................................................60  
Alarm clock.......................................................................68  
World clock.......................................................................68  
Clock settings....................................................................68  
Automatic retrieval settings........................................60 Notes....................................................................................69  
Service message settings................................................60  
Write and send notes......................................................69  
Cell broadcast settings....................................................61 Nokia Wireless Keyboard...................................................69  
Other settings...................................................................61  
Free time........................................................70  
Nokia Office Tools...........................................62  
Camera.................................................................................70  
Capture an image.............................................................70 Push to talk.........................................................................79  
Record a video clip...........................................................70  
Camera settings...............................................................71  
Gallery..................................................................................71  
Work with media files and folders.................................71  
View images.....................................................................71  
Manage image files..........................................................72  
RealPlayer............................................................................72  
PTT settings......................................................................80  
Log in to PTT service........................................................80  
Make a PTT call.................................................................80  
Created PTT calls..............................................................80  
Manage PTT contacts.......................................................80  
Create a PTT channel.......................................................81  
Exit PTT..............................................................................81  
Play video clips and stream links...................................72 About GPS and satellite signals.........................................81  
Send audio files and video clips.....................................73 Positioning settings...........................................................82  
View information about a media clip............................73 Nokia Maps..........................................................................82  
RealPlayer settings..........................................................73  
Music player.........................................................................73  
Listen to music.................................................................73  
Track lists..........................................................................74  
Music categories...............................................................74  
Preset frequency settings...............................................74  
Recorder..............................................................................74  
Download maps...............................................................82  
Satellite information.......................................................83  
Browse maps....................................................................84  
Find a place.......................................................................84  
Plan a route......................................................................84  
Navigation........................................................................85  
Guides...............................................................................85  
Record a sound clip..........................................................75 GPS data...............................................................................85  
Play a recording...............................................................75  
Use GPS data.....................................................................86  
Recorder settings.............................................................75 Landmarks...........................................................................86  
Instant messaging..............................................................75  
Start a conversation.........................................................76  
IM groups..........................................................................76  
Block users........................................................................77  
IM application settings....................................................77  
Create a landmark............................................................86  
Edit landmarks.................................................................86  
Landmark categories.......................................................87  
Receive landmarks...........................................................87  
Connectivity....................................................88  
Flash player.........................................................................78 Fast downloading...............................................................88  
Manage flash files............................................................78 Nokia PC Suite.....................................................................88  
Visual radio..........................................................................78 Data cable............................................................................88  
Listen to the radio...........................................................78 Infrared................................................................................89  
View visual content.........................................................79 Bluetooth.............................................................................89  
Saved stations..................................................................79  
Visual Radio settings.......................................................79  
About Bluetooth...............................................................89  
Send and receive data with Bluetooth..........................90  
Pair devices.......................................................................91 Activation keys..................................................................104  
Security tips......................................................................92 Use activation keys........................................................104  
SIM access profile................................................................92 Data synchronisation.......................................................105  
Wireless LAN........................................................................92  
WLAN connections...........................................................93  
See WLAN availability......................................................93  
Create a synchronisation profile..................................105  
Select applications to synchronise...............................105  
Synchronisation connection settings..........................106  
WLAN wizard....................................................................93 Download!.........................................................................106  
Internet access points........................................................94  
Set up an internet access point for packet data  
Select catalogs, folders, and items..............................106  
Download! settings.......................................................107  
(GPRS)................................................................................95 Software updates.............................................................107  
Advanced internet access point settings for packet  
Settings........................................................108  
data (GPRS).......................................................................95  
Set up an access point for WLAN manually...................96 General settings................................................................108  
Advanced access point settings for WLAN.....................96  
Modem.................................................................................96  
Connection manager..........................................................97  
View and end active connections...................................97  
Search for WLAN...............................................................97  
Personalisation settings...............................................108  
Display settings...........................................................108  
Standby mode settings..............................................109  
Tone settings...............................................................109  
Language settings......................................................109  
Notification light.........................................................109  
Date and time settings..................................................109  
Enhancement settings...................................................110  
Common enhancement settings...............................110  
Security settings............................................................110  
Device and SIM card security......................................110  
Restore original settings...............................................111  
Security and data management.....................98  
Memory card security.........................................................98  
Fixed dialling.......................................................................99  
Certificate manager............................................................99  
View certificate details..................................................100  
Certificate trust settings................................................100 Telephone settings...........................................................111  
Security modules..............................................................100  
View and edit security modules...................................100  
Call settings....................................................................111  
Network settings...........................................................112  
Back up data......................................................................101 Connection settings..........................................................112  
Remote configuration......................................................101  
Application manager........................................................102  
Install applications........................................................102  
Installation settings......................................................103  
Java security settings....................................................103  
Access points..................................................................112  
Packet data (GPRS) settings..........................................112  
WLAN settings................................................................113  
Advanced WLAN settings..............................................113  
WLAN security settings..................................................113  
WEP security settings....................................................114 Operating environment...................................................130  
WEP key settings............................................................114 Medical devices.................................................................130  
802.1x security settings................................................114  
WPA security settings....................................................114  
Implanted medical devices...........................................130  
Hearing aids...................................................................131  
Wireless LAN plugins.....................................................115 Vehicles..............................................................................131  
EAP plug-ins.................................................................115 Potentially explosive environments...............................131  
Use EAP plug-ins..........................................................115 Emergency calls................................................................132  
Session initiation protocol (SIP) settings....................115 CERTIFICATION INFORMATION (SAR).................................132  
Edit SIP profiles..............................................................115  
Index............................................................134  
Edit SIP proxy servers....................................................116  
Edit registration servers................................................116  
Net call settings.............................................................116  
Configuration settings...................................................116  
Restrict packet data.......................................................117  
Application settings.........................................................117  
Shortcuts......................................................118  
General shortcuts..............................................................118  
Glossary........................................................120  
Troubleshooting...........................................123  
Charging and discharging................................................126  
Nokia battery authentication guidelines.......................127  
Authenticate hologram.................................................127  
What if your battery is not authentic?........................127  
Care and maintenance.................................128  
Disposal.............................................................................128  
Additional safety information.....................130  
Small children...................................................................130  
For your safety  
Read these simple guidelines. Not following them may be  
dangerous or illegal. Read the complete user guide for  
further information.  
SWITCH OFF NEAR BLASTING  
Follow any restrictions. Do not use the device  
where blasting is in progress.  
SWITCH ON SAFELY  
USE SENSIBLY  
Do not switch the device on when wireless  
phone use is prohibited or when it may cause  
interference or danger.  
Use only in the positions as explained in the  
product documentation. Do not touch the  
antenna areas unnecessarily.  
ROAD SAFETY COMES FIRST  
QUALIFIED SERVICE  
Obey all local laws. Always keep your hands free  
to operate the vehicle while driving. Your first  
consideration while driving should be road  
safety.  
Only qualified personnel may install or repair  
this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and  
batteries. Do not connect incompatible  
products.  
INTERFERENCE  
All wireless devices may be susceptible to  
interference, which could affect performance.  
WATER-RESISTANCE  
SWITCH OFF IN HOSPITALS  
Your device is not water-resistant. Keep it dry.  
Follow any restrictions. Switch the device off  
near medical equipment.  
BACK-UP COPIES  
SWITCH OFF IN AIRCRAFT  
Remember to make back-up copies or keep a  
written record of all important information  
stored in your device.  
Follow any restrictions. Wireless devices can  
cause interference in aircraft.  
SWITCH OFF WHEN REFUELING  
Do not use the device at a refueling point. Do  
not use near fuel or chemicals.  
10  
 
CONNECTING TO OTHER DEVICES  
devices, consider installing, using, and regularly updating  
antivirus software, firewall, and other related software on  
your device and any connected computer.  
When connecting to any other device, read its  
user guide for detailed safety instructions. Do  
not connect incompatible products.  
Warning: To use any features in this device, other  
than the alarm clock, the device must be switched on. Do  
not switch the device on when wireless device use may  
cause interference or danger.  
EMERGENCY CALLS  
Ensure the phone function of the device is  
switched on and in service. Press the end key as  
many times as needed to clear the display and  
return to the standby mode. Enter the  
emergency number, then press the call key. Give  
your location. Do not end the call until given  
permission to do so.  
During extended operation, such as an active video  
sharing session or high-speed data connection, the device  
may feel warm. In most cases, this condition is normal. If  
you suspect the device is not working properly, take it to  
the nearest authorized service facility.  
The office applications support common features of  
Microsoft Word, PowerPoint, and Excel (Microsoft Office  
2000, XP, and 2003). Not all file formats can be viewed or  
modified.  
About your device  
The wireless device described in this guide is approved for  
use on the GSM 850, 900, 1800, 1900, and UMTS 850 and  
2100 networks. Contact your service provider for more  
information about networks.  
Network services  
When using the features in this device, obey all laws and  
respect local customs, privacy and legitimate rights of  
others, including copyrights.  
To use the phone you must have service from a wireless  
service provider. Many of the features require special  
network features. These features are not available on all  
networks; other networks may require that you make  
specific arrangements with your service provider before  
you can use the network services. Your service provider  
can give you instructions and explain what charges will  
apply. Some networks may have limitations that affect  
how you can use network services. For instance, some  
networks may not support all language-dependent  
characters and services.  
Copyright protections may prevent some images, music  
(including ringing tones), and other content from being  
copied, modified, transferred, or forwarded.  
Your device supports internet connections and other  
methods of connectivity. Like computers, your device may  
be exposed to viruses, malicious messages and  
applications, and other harmful content. Exercise caution  
and open messages, accept connectivity requests,  
download content, and accept installations only from  
trustworthy sources. To increase the security of your  
11  
Your service provider may have requested that certain  
features be disabled or not activated in your device. If so,  
   
these features will not appear on your device menu. Your  
device may also have a special configuration such as  
changes in menu names, menu order, and icons. Contact  
your service provider for more information.  
This device supports WAP 2.0 protocols (HTTP and SSL) that  
run on TCP/IP protocols. Some features of this device, such  
as MMS, browsing, and e-mail require network support for  
these technologies.  
Enhancements,  
batteries, and chargers  
Always switch the device off and disconnect the charger  
before removing the battery.  
Check the model number of any charger before use with  
this device. This device is intended for use when supplied  
with power from the AC-5 charger.  
The battery intended for use with this device is BP-6MT.  
Warning: Use only batteries, chargers, and  
enhancements approved by Nokia for use with this  
particular model. The use of any other types may  
invalidate any approval or warranty, and may be  
dangerous.  
For availability of approved enhancements, please check  
with your dealer. When you disconnect the power cord of  
any enhancement, grasp and pull the plug, not the cord.  
12  
 
Get started  
Model number: Nokia E51-1 (RM-244, with camera) and  
Nokia E51-2 (RM-426, without camera).  
Hereinafter referred to as Nokia E51.  
Insert the SIM card and  
battery  
3. Insert the SIM card. Make sure that the contact area on  
the card is facing the connectors on the device and that  
the bevelled corner is facing the top of the device.  
For availability and information on using SIM card services,  
contact your SIM card vendor. This may be the service  
provider or other vendor.  
1. With the back of the device facing you, press the  
release button (1) and slide the back cover off (2).  
4. Insert the battery. Align the contacts of the battery  
with the corresponding connectors on the battery  
compartment and insert in the direction of the arrow.  
2. If the battery is inserted, lift the battery in the direction  
of the arrow to remove it.  
13  
     
3. When the battery is fully charged, disconnect the  
charger from the device, then from the wall outlet.  
Your battery has been precharged at the factory, but the  
charging levels may vary. To reach the full operation time,  
charge the battery until it has been fully charged according  
to the battery level indicator.  
Tip: If you have old compatible Nokia chargers, you  
can use them with the Nokia E51 by attaching the  
CA-44 charger adapter to the old charger. The  
adapter is available as a separate enhancement.  
5. Slide the back cover back to place.  
Charge the battery  
1. Connect a compatible charger to a wall outlet.  
2.  
Connect the power cord to the device. If the battery is  
completely discharged, it may take a while before the  
charging indicator starts scrolling.  
14  
   
6 — Navi™ scroll key. Press the scroll key to enter a  
Keys and parts  
selection, to scroll left, right, up, and down on the display.  
7 — Selection key. Press the selection key to perform the  
function shown above it on the display.  
8 — End key. Press the end key to reject a call, end active  
calls and held calls, and with a long keypress, end data  
connections.  
9 — Backspace key. Press the key to delete items.  
10 — Shift key. When writing text, press and hold the key  
and select the text with the scroll key. Press this key for a  
few seconds to toggle between the Silent and General  
profiles.  
11 — Press the key for a few seconds to switch on  
Bluetooth connectivity. When writing text, press the key  
and select More symbols to access special characters.  
12 — Call key  
13 — Selection key  
14 — Infrared port  
15 — Voice key. This key is used in the voice commands,  
Recorder, and Push to talk applications.  
16 — Notification light and light sensor  
17 — Microphone  
1 — Power key  
2 — Earpiece  
18 — Headset connector  
19 — Wrist strap hole  
3 — Volume up key  
20 — Mini-USB port  
4 — Mute key. Press the key to mute the microphone  
21 — Charger connector  
during a call.  
5 — Volume down key  
15  
   
Attach the wrist strap  
Thread the wrist strap as  
shown, and tighten it.  
1 — Home key  
2 — Contacts key  
3 — E-mail key  
4 — Calendar key  
First start-up  
1. Press and hold the power key.  
2. If the device asks for a PIN code or lock  
code, enter the code, and select OK.  
Connect the headset  
3. When prompted, enter the country in  
which you are located and the current  
date and time. To find your country,  
enter the first letters of the country  
name. It is important to select the correct  
country, because scheduled calendar  
entries may change if you change the  
country later and the new country is  
located on a different time zone  
Warning: When you use the headset, your ability  
to hear outside sounds may be affected. Do not use the  
headset where it can endanger your safety.  
Connect the compatible headset to the headset connector  
of your device.  
4. The Welcome application opens. Select  
from the various options, or select Exit  
to close the application.  
To configure the various settings in your  
device, use the Settings wizard application  
and the wizards available in the standby mode. When you  
switch the device on, it may recognise the SIM card  
provider and configure some settings automatically. You  
can also contact your service provider for the correct  
settings.  
16  
         
You can switch the device on with no SIM card inserted, in To lock the keys manually in the standby mode, press the  
which case the device starts up in the offline mode, and  
left selection key and *.  
you cannot use the network-dependent phone functions.  
To unlock the keys, press the left  
To switch the device off, press and hold the power key.  
selection key and *.  
Tip: To lock the keys in  
the menu or in an open  
application, press the  
power key briefly, and  
select Lock keypad. To  
unlock, press the left  
selection key and *.  
Lock the keys  
When the device or keypad is locked, calls may be possible  
to the official emergency number programmed into your  
device.  
The keypad of your device locks automatically to prevent  
the keys from being accidentally pressed. To change the  
period after which the keypad is locked, select Menu >  
Tools > Settings > General > Security > Phone and  
SIM card > Keypad autolock period.  
Display indicators  
The device is being used in a GSM network (network  
service). The bar next to the icon indicates the signal  
strength of the network at your current location. The  
higher the bar, the stronger the signal.  
The device is being used in a UMTS network (network  
service).  
The battery charge level. The higher the bar, the  
stronger the charge in the battery.  
17  
       
You have one or more unread messages in the Inbox  
A UMTS packet data connection is active.  
A UMTS packet data connection on hold.  
folder in Messaging.  
You have received new e-mail in the remote mailbox.  
High-speed downlink packet access (HSDPA) is  
supported and available (network service). The icon may  
vary between regions.  
There are messages waiting to be sent in the Outbox  
folder in Messaging.  
You have one or more missed phone calls.  
The keys of the device are locked.  
An alarm is active.  
High-speed downlink packet access (HSDPA) is active.  
The icon may vary between regions.  
High-speed downlink packet access (HSDPA) is on hold.  
The icon may vary between regions.  
You have selected the Silent profile, and the device does  
You have set the device to scan for WLANs, and a WLAN  
not ring for an incoming call or message.  
is available.  
Bluetooth is active.  
A WLAN connection is active in a network that does not  
have encryption.  
Data is being transmitted using Bluetooth  
connectivity. When the indicator is blinking, your device is  
trying to connect with another device.  
A WLAN connection is active in a network that has  
encryption.  
An infrared connection is active. If the indicator  
blinks, your device is trying to connect to the other device,  
or the connection has been lost.  
Your device is connected to a computer with a USB  
data cable.  
The second phone line is being used (network service).  
A GPRS packet data connection is available (network  
service).  
All calls are forwarded to another number. If you  
have two phone lines, a number indicates the active line.  
A GPRS packet data connection is active.  
A GPRS packet data connection is on hold.  
A headset is connected to the device.  
The connection to a headset with Bluetooth  
An EGPRS packet data connection is available (network  
connectivity has been lost.  
service).  
A hands-free car kit is connected to the device.  
A loopset is connected to the device.  
A text phone is connected to the device.  
Your device is synchronising.  
An EGPRS connection is active.  
An EGPRS packet data connection is on hold.  
A UMTS packet data connection is available (network  
18  
service).  
You have an ongoing push-to-talk connection.  
Your push-to-talk connection is in the do not disturb  
mode, because the ringing type setting of your device is  
set to Beep once or Silent, or you have an incoming or  
ongoing phone call. In this mode, you cannot make PTT  
calls.  
Nokia support and  
contact information  
Check www.nokia.com/support or your local Nokia  
website for the latest guides, additional information,  
downloads, and services related to your Nokia product.  
If you need to contact customer service, check the list of  
local Nokia Care contact centres at www.nokia.com/  
customerservice.  
For maintenance services, check your nearest Nokia  
service centre at www.nokia.com/repair.  
19  
   
Your Nokia E51  
The images in this guide may differ from your device  
display.  
Settings wizard configures your device for settings based  
on your network operator information. To use these  
services, you may have to contact your service provider to  
activate a data connection or other services.  
The availability of the different settings items in Settings  
wizard depends on the features of the device, SIM card,  
wireless service provider, and the availability of the data  
in the Settings wizard database.  
Welcome  
When you switch on your device for the first time, the  
Welcome application opens. Select from the following:  
Tutorial provides information about your device and  
If Settings wizard is not available from your service  
shows you how to use it.  
provider, it may not appear in the menu of your device.  
Switch enables you to transfer content, such as  
contacts and calendar entries, from a compatible Nokia  
device. See "Transfer content between  
devices", p. 23.  
To start the wizard, select Start. When you use the wizard  
for the first time, you are guided through the settings  
configuration. If there is no SIM card inserted, you need to  
select the home country of your service provider, and your  
service provider. If the country or service provider  
suggested by the wizard is not correct, select the correct  
one from the list. If the settings configuration is  
interrupted, the settings are not defined.  
Settings wizard helps you configure various settings.  
See "Settings wizard", p. 20.  
Operator contains a link to your operator's home  
portal.  
To access the main view of the Settings wizard after the  
To open the Welcome application later, select Menu >  
wizard has finished the settings configuration, select OK.  
Help > Welcome.  
In the main view, select Options and from the following:  
The available items may vary between regions.  
Operator — Configure operator-specific settings such  
as MMS, internet, WAP, and streaming settings.  
E-mail settings — Configure e-mail settings.  
Push to talk — Configure push-to-talk settings.  
Video sharing — Configure video sharing settings.  
Settings wizard  
20  
Select Menu > Tools > Sett. wizard.  
         
If you are not able to use Settings wizard, visit the Nokia  
phone settings web site.  
To use the basic standby mode, select Menu > Tools >  
Settings > General > Personalisation > Standby  
mode > Active standby > Off.  
Standby modes  
Standby  
Your device has two different standby modes: active  
standby mode and standby mode.  
In the basic standby mode, you  
can see your service provider,  
time, and different indicators,  
such as indicators for alarms.  
Active standby  
To view the most recently  
dialled numbers, press the call  
key. Scroll to a number or name,  
and press the call key again to  
call the number.  
After you have switched on your  
device and it is ready for use,  
but you have not entered any  
characters or made other  
selections, the device is in the  
active standby mode. In the  
active standby mode, you can  
view different indicators such  
as network operator indicators  
or indicators for alarms, and  
applications you want to access  
fast.  
To call your voice mailbox  
(network service), press and  
hold 1.  
To view calendar information,  
scroll right.  
To write and send text messages, scroll left.  
To change these shortcuts, select Menu > Tools >  
Settings > General > Personalisation > Standby  
mode > Shortcuts.  
To select applications that you  
want to access from active  
standby, select Menu > Tools > Settings > General >  
Personalisation > Standby mode > Active standby  
apps..  
Menu  
To change the functions of the selection keys in active  
standby, select Menu > Tools > Settings > General >  
Personalisation > Standby mode > Shortcuts.  
Select Menu.  
21  
             
The menu is a starting point  
from which you can open all  
applications in the device or on  
a memory card.  
To download applications from the web, select Options >  
Download applications.  
The menu contains applications  
and folders, which are groups of  
similar applications. All  
applications you install in the  
device yourself are by default  
saved in the Installations  
folder.  
Common actions in  
several applications  
You can find the following actions in several applications:  
To change the profile, or switch off or lock the device, press  
the power key briefly.  
To open an application, scroll to  
If an application consists of  
several tabs (see figure), open a  
tab by scrolling right or left.  
it, and press the scroll key.  
To view the applications in a list, select Options >  
Change view > List view. To return to the grid view,  
select Options > Change view > Grid view.  
To save the settings that you  
have configured in an  
application, select Back.  
To make the application icons and folders animated, select  
Options > Icon animation > On.  
To save a file, select Options >  
Save. There are different saving  
options depending on the  
application you use.  
To view the memory consumption of different  
applications and data stored on the device or memory card  
and to check the amount of free memory, select Options >  
Memory details.  
To send a file, select Options >  
Send. You can send a file in an  
To create a new folder, select Options > New folder.  
To rename a new folder, select Options > Rename.  
e-mail or multimedia message,  
or using Bluetooth connectivity or infrared.  
To rearrange the folder, scroll to the application you want  
to move, and select Options > Move. A check mark is  
placed beside the application. Scroll to a new location, and  
select OK.  
To copy, press and hold the shift key, and select the text  
with the scroll key. Press and hold the shift key, and select  
Copy. To paste, scroll to where you want to paste the text,  
press and hold the shift key, and select Paste. This method  
may not work in applications that have their own copy and  
paste commands.  
To move an application to a different folder, scroll to the  
application you want to move, and select Options >  
Move to folder, the new folder, and OK.  
22  
   
To select different items, such as messages, files, or  
contacts, scroll to the item you want to select. Select  
Options > Mark/Unmark > Mark to select one item or  
Options > Mark/Unmark > Mark all to select all items.  
transfer earlier. The items that you can transfer vary  
depending on the other device.  
Transfer content between  
devices  
Tip: To select almost all items, first selectOptions >  
Mark/Unmark > Mark all, then select the items  
you do not want, and Options > Mark/Unmark >  
Unmark.  
To connect the two devices, follow the instructions on the  
display. For some device models, the Transfer application  
is sent to the other device as a message. To install Transfer  
on the other device, open the message, and follow the  
instructions on the display. On your new Eseries device,  
select the content you want to copy from the other device.  
To select an object (for example, an attachment in a  
document) scroll to the object so that square markers  
appear on each side of the object.  
After the data transfer, you can save the shortcut with the  
transfer settings to the main view to repeat the same  
transfer later. To edit the shortcut, select Options >  
Shortcut settings.  
Transfer  
Select Menu > Tools > Switch.  
You can transfer content, such as contacts, from a  
compatible Nokia device to your new Eseries device using  
Bluetooth connectivity or infrared. The type of content  
that can be transferred depends on the device model. If  
the other device supports synchronisation, you can also  
synchronise data between the two devices or send data  
from this device to the other device.  
View transfer log  
A transfer log is shown after every transfer.  
To view the transfer details, scroll to the transferred item  
in the log, and select Options > Details.  
When you transfer data from your previous device, it may  
require you to insert the SIM card. Your new Eseries device  
does not need a SIM card when transferring data.  
To view the log of a previous transfer, scroll to a transfer  
shortcut, if available, in the main view, and select  
Options > View log.  
Content is copied from the memory of the other device to  
the corresponding location in your device. Copying time  
depends on the amount of data to be transferred. You can  
also cancel and continue later.  
Any unresolved transfer conflicts are also displayed in the  
log view. To start solving conflicts, select Options > Solve  
conflicts.  
The necessary steps for data transfer may vary depending  
23  
on your device, and whether you have interrupted data  
         
To customise a profile, select a profile and Options >  
Synchronise, retrieve, and  
send data  
Personalise.  
To change a profile, select a profile and Options >  
Activate. The Offline profile prevents your device from  
accidentally switching on, sending or receiving messages,  
or using wireless LAN, Bluetooth, or FM radio; it also closes  
any internet connection that may be in operation when  
the profile is selected. The Offline profile does not prevent  
you from establishing a wireless LAN or Bluetooth  
connection at a later time, or from restarting the FM radio,  
so comply with any applicable safety requirements when  
establishing and using these features.  
If you have previously transferred data to your device with  
the Transfer application, select from the following icons in  
the Transfer main view:  
Synchronise data with a compatible device if the other  
device supports synchronisation. With synchronisation,  
you can keep the data up-to-date in both devices.  
Retrieve data from the other device to your new  
Eseries device.  
To delete a profile that you created, select Options >  
Send data from your new Eseries device to your other  
device.  
Delete profile. You cannot delete the predefined profiles.  
Select ringing tones  
Personalisation  
To set a ringing tone for a profile, select Options >  
Personalise > Ringing tone. Select a ringing tone from  
the list, or select Download sounds to open a bookmark  
folder containing a list of bookmarks for downloading  
tones using the browser. Any downloaded tones are saved  
to Gallery.  
You can personalise your device by adjusting the various  
tones, background images, and screen savers, for  
example.  
Profiles  
To play the ringing tone for a selected contact group only,  
select Options > Personalise > Alert for, and select the  
desired group. Phone calls coming from outside that  
group have a silent alert.  
Select Menu > Tools > Profiles.  
You can adjust and customise the ringing tones, alert  
tones, and other device tones for different events,  
environments, or caller groups. The profile currently in use  
is shown at the top of the display in the standby mode.  
However, if the active profile is General, only today's date  
is shown.  
To change the message tone, select Options >  
Personalise > Message alert tone.  
24  
To create a new profile, select Options > Create new,  
and define the settings.  
             
Profile name — You can give a name to a new profile  
or rename an existing profile. The General and Offline  
profiles cannot be renamed.  
Customise profiles  
Select Options > Personalise, and define the following:  
Ringing tone — Select a ringing tone from the list, or  
select Download sounds to open a bookmark folder  
containing a list of bookmarks for downloading tones  
using the browser. If you have two alternate phone  
lines in use, you can specify a ringing tone for each line.  
Video call tone — Select a ringing tone for video calls.  
Say caller's name — When you select this option and  
someone from your contacts list calls you, the device  
sounds a ringing tone that is a combination of the  
spoken name of the contact and the selected ringing  
tone.  
Change the display theme  
Select Menu > Tools > Themes.  
To change the theme used in all applications, select the  
General folder.  
To change the theme used in the main menu, select the  
Menu view folder.  
Ringing type — Select how you want the ringing tone  
to alert.  
To change the theme for a particular application, select  
the application-specific folder.  
Ringing volume — Select the volume level of the  
ringing tone.  
To change the background image for the standby mode,  
select the Wallpaper folder.  
Message alert tone — Select a tone for received text  
messages.  
To select an image or write a text for the screen saver,  
E-mail alert tone — Select a tone for received e-mail  
messages.  
select the Power saver folder.  
IM alert tone — Select a tone for received instant  
messages.  
Download a theme  
Vibrating alert — Select whether you want the device  
to vibrate when you receive a call.  
To download a theme, select General or Menu view >  
Download themes. Enter the link from which you want  
to download your theme. Once the theme is downloaded,  
you can preview, activate, or edit it.  
Keypad tones — Set the volume level of the device  
keypad tones.  
Warning tones — Set the warning tones on or off.  
Alert for — You can set the device to ring only upon  
calls from phone numbers that belong to a selected  
contact group. Phone calls coming from outside that  
group have a silent alert.  
To preview a theme, select Options > Preview.  
To start using the selected theme, select Options > Set.  
25  
           
3-D ringing tones  
One-touch keys  
Select Menu > Media > 3-D ringing tones.  
With the One-touch keys you can access applications and  
tasks quickly. Each key has been assigned an application  
and a task. To change these, select Menu > Tools >  
Settings > General > Personalisation > One-touch  
keys. Your network operator may have assigned  
applications to the keys, in which case you cannot change  
them.  
To enable three-dimensional sound effects for ringing  
tones, select 3-D ringing tone effects > On. Not all  
ringing tones support 3–D effects.  
To change the 3–D effect that is applied to the ringing  
tone, select Sound trajectory and the desired effect.  
To modify the 3–D effect, select from the following:  
Trajectory speed — Select the speed at which sound  
moves from one direction to another. This setting is not  
available for all effects.  
Reverberation — To adjust the amount of echo, select  
the desired effect.  
Doppler effect — Select On to have the ringing tone  
sound higher when you are closer to your device, and  
lower when you are farther away. This setting is not  
available for all effects.  
1 — Home key  
2 — Contacts key  
3 — E-mail key  
4 — Calendar key  
To listen to the ringing tone with the 3–D effect, select  
Options > Play tone.  
To adjust the volume of the ringing tone, select Menu >  
Tools > Profiles > Options > Personalise > Ringing  
volume.  
Home key  
To access the main menu, press the home key briefly. Press  
the home key briefly again to access the active standby.  
To view the list of active applications, press the home key  
for a few seconds. When the list is open, press the home  
key briefly to scroll the list. To open the selected  
application, press the home key for a few seconds, or press  
the scroll key. To close the selected application, press the  
backspace key.  
Volume control  
To adjust the earpiece volume during a phone call or the  
volume of the media applications, use the volume keys.  
26  
           
Leaving applications running in the background increases  
the demand on battery power and reduces the battery life.  
Example: When you have an active phone call and  
want to check your calendar, press the home key to  
access the menu, and open the Calendar  
application. The phone call remains active in the  
background.  
Contacts key  
Example: When you are writing a message and  
want to check a web site, press the home key to  
access the menu, and open the Web application.  
Select a bookmark or enter the web address  
manually, and select Go to. To return to your  
message, press and hold the home key, scroll to the  
message and press the scroll key.  
To open the Contacts application, press the contacts key  
briefly.  
To create a new contact, press the contacts key for a few  
seconds.  
Calendar key  
To open the Calendar application, press the calendar key  
briefly.  
Memory  
To create a new meeting entry, press the calendar key for  
There are two types of memory into which you can save  
data or install applications: device memory and memory  
card.  
a few seconds.  
E-mail key  
To open your default mailbox, press the e-mail key briefly.  
Free memory  
To create a new e-mail message, press the e-mail key for  
To see how much memory is currently in use, how much  
free memory remains, and how much memory is  
a few seconds.  
consumed by each data type, select Menu > Options >  
Memory details > Phone memory or Memory card.  
Multitasking  
Tip: To ensure that you have adequate memory,  
transfer data regularly to a memory card or  
computer, or use File manager to delete files you no  
longer need.  
You can have several applications open at the same time.  
To switch between active applications, press and hold the  
home key, scroll to an application, and press the scroll key.  
To close the selected application, press the backspace key.  
After you install applications to a compatible memory  
card, installation files (.sis) remain in the device memory.  
The files may use large amounts of memory and prevent  
27  
                     
you from storing other files. To maintain sufficient  
The sales package of your device may not include a  
memory, use Nokia PC Suite to back up installation files to memory card. Memory cards are available as separate  
a compatible PC, then use the file manager to remove the enhancements.  
installation files from the device memory. If the .sis file is  
a message attachment, delete the message from the  
Messaging inbox.  
1. With the back of the device facing you, press the  
release button (1) and slide the back cover off (2).  
Memory card  
Select Menu > Tools > Memory.  
If you cannot use a memory card in your device, you may  
have the wrong type of memory card, the card may not be  
formatted for your device, or the card has a corrupted file  
system. Your Nokia device supports the FAT16 and FAT32  
file system for memory cards.  
2. Insert the memory card in the slot with the contact  
area first. Make sure that the contact area is facing the  
connectors on the device.  
MicroSD  
This device uses a microSD memory card.  
To ensure interoperability, use only  
compatible microSD cards with this device.  
Check the compatibility of a microSD card with its  
manufacturer or provider. Other memory cards than  
microSD cards are not compatible with this device. Using  
an incompatible memory card may damage the memory  
card as well as the device, and data stored on the  
incompatible card may be corrupted.  
3. Push the card in until it locks into place.  
4. Close the back cover.  
Insert the memory card  
Use a memory card  
Use a memory card to save the memory on your device.  
You can also back up information from your device to the  
memory card.  
To format a memory card for your device, select Options >  
Format memory card. When a memory card is formatted,  
all data on the card is lost permanently. Consult your  
retailer to find out if you must format the memory card  
before you can use it.  
28  
             
To change the name of the memory card, select Options >  
Write text  
Memory card name.  
You can protect a memory card with a password to prevent  
unauthorised access. To set a password, select Options >  
Set password. The password can be upto eight characters  
long and is case-sensitive. The password is stored in your  
device. You do not need to enter it again while you use the  
memory card in the same device. If you use the memory  
card in another device, you are asked for the password.  
Not all memory cards support password protection.  
The input methods provided in the device may vary  
according to different sales markets.  
Traditional text input  
is shown on the top right of the display when you  
are writing text using traditional text input.  
and  
indicate the selected case.  
To remove the memory card password, select Options >  
Remove password. When you remove the password, the  
data on the memory card is not protected against  
unauthorised use.  
indicates that the first letter of the sentence is written in  
uppercase and all the other letters are automatically  
written in lowercase.  
indicates the number mode.  
To write text with the keypad, press a number key 2-9  
repeatedly until the desired character appears. There are  
more characters available for a number key than are  
printed on the key. If the next letter is located on the same  
key as the present one, wait until the cursor appears, and  
enter the letter.  
To open a locked memory card, select Options > Unlock  
memory card. Enter the password.  
Eject the memory card  
Important: Do not remove the memory card in the  
middle of an operation when the card is being accessed.  
Removing the card in the middle of an operation may  
damage the memory card as well as the device, and data  
stored on the card may be corrupted.  
To insert a number, press and hold the number key.  
To switch between the upper and lower case mode and  
the number mode, press #.  
To erase a character, press the backspace key. Press and  
1. Press the power key briefly, and select Remove  
hold the backspace key to erase more than one character.  
memory card.  
To access the most common punctuation marks, press the  
1 key. Press 1 repeatedly to reach the desired punctuation  
mark.  
2. Press the release button and slide off the back cover.  
3. Press the end of the memory card to release it from the  
memory card slot.  
To add special characters, press *. Scroll to the desired  
4. Close the back cover.  
character and press the scroll key.  
29  
       
To insert a space, press 0. To move the cursor to the next  
Change the writing language  
line, press 0 three times.  
When you are writing text, you can change the writing  
language. For example, if you press the 6 key repeatedly  
to reach a specific character, changing the writing  
language gives you access to characters in a different  
order.  
To switch between the different character cases, press #.  
Predictive text input  
1. To activate predictive text input, press # twice quickly.  
If you are writing text usinganon-Latin alphabetand want  
to write Latin characters, for example e-mail or web  
addresses, you may need to change the writing language.  
To change the writing language, select Options >  
Writing language, and a writing language that uses Latin  
characters.  
This activates predictive text input for all editors in the  
device. The indicator  
is shown on the display.  
2. To write the desired word, press 2-9. Press each key  
only once for one letter.  
3. When you have finished writing the word and it is  
correct, scroll right to confirm it, or press 0 to add a  
space.  
Antennas  
If the word is not correct, press * repeatedly to view  
the matching words the dictionary has found.  
Your device has internal antennas.  
If the ? character is shown after the word, the word you  
intended to write is not in the dictionary. To add a  
word to the dictionary, select Spell, enter the word (up  
to 32 letters) using traditional text input, and select  
OK. The word is added to the dictionary. When the  
dictionary is full, the new word replaces the oldest  
added word.  
Note: As with any other radio transmitting device,  
do not touch the antenna unnecessarily when the device  
is switched on. Contact with the antenna affects call  
quality and may cause the device to operate at a higher  
power level than otherwise needed. To optimize antenna  
performance and battery life, avoid contact with the  
antenna area when operating the device.  
Write the first half of a compound word; to confirm it,  
scroll right. Write the last part of the compound word. To  
complete the compound word, press 0 to add a space.  
To switch predictive text input off for all editors in the  
device, press # twice quickly.  
30  
           
Further information  
Instructions in your device  
To read instructions for the current view of the open  
application, select Options > Help.  
To browse the help topics and conduct searches, select  
Menu > Help > Help. You can select categories for which  
you want to see instructions. Select a category, such as  
Messaging, to see what instructions (help topics) are  
available. While you are reading the topic, scroll left or  
right to see the other topics in that category.  
To switch between the application and help, press and  
hold the home key.  
Tutorial  
The tutorial provides you information about your device  
and shows you how to use it. Select Menu > Help >  
Tutorial.  
31  
 
Business communications  
Your device provides you with efficient tools for voice  
communication and contact and time management.  
When you have an active call and the call waiting function  
(network service) is activated, press the call key to answer  
a new incoming call. The first call is put on hold. To end  
the active call, press the end key.  
Telephone  
Make a call  
To make and receive calls, the device must be switched on,  
the device must have a valid SIM card installed, and you  
must be located in the service area of a cellular network.  
Important: If the device has been locked, enter the  
lock code to activate the phone function. When the device  
is locked, calls may be possible to the official emergency  
number. Making an emergency call in the offline profile or  
when the device is locked requires that the device  
recognize the number to be an official emergency number.  
It is advisable to change the profile or unlock the device  
by entering the lock code before you make the emergency  
call.  
To make or receive a net call, your device must be  
connected to a net call service. To connect to a net call  
service, your device must be in the coverage of a  
connection network, such as a WLAN access point.  
Voice calls  
To make a call, enter the phone number, including the area  
Note: The actual invoice for calls and services from  
your service provider may vary, depending on network  
features, rounding off for billing, taxes, and so forth.  
code, and press the call key.  
Tip: For international calls, add the + character that  
replaces the international access code, and enter  
the country code, area code (omit the leading 0, if  
necessary), and phone number.  
Answer a call  
To answer a call, press the call key.  
To reject a call, press the end key.  
To end the call or cancel the call attempt, press the end  
key.  
To mute the ringing tone instead of answeringacall, select  
To make a call using the saved contacts, select Contacts  
32  
Silence.  
in the standby mode. Enter the first letters of the name,  
             
scroll to the name, and press the call key. See  
"Contacts", p. 40.  
To make a call using the log, press the call key to view up  
to 20 numbers that you last called or attempted to call.  
Scroll to the desired number or name, and press the call  
key. See "Log", p. 39.  
To adjust the volume of an active call, use the volume keys.  
To switch from a voice call to a video call, select Options >  
Switch to video call. The device ends the voice call and  
makes a video call to the recipient.  
modem, select Options > Activate modem. You can  
answer incoming fax calls only from the computer or fax  
machine connected to your device.  
To reject an incoming fax call, select Options > Reject.  
To reject a call while a fax call is in progress, select  
Reject.  
A fax call cannot be put on hold.  
Video calls  
To be able to make a video call, you need to be in the  
coverage of a UMTS network. For availability of and  
subscription to video call services, contact your network  
operator or service provider. While talking, you can see a  
real-time, two-way video between you and the recipient  
of the call, if the recipient has a compatible mobile phone.  
The video image captured by the camera in your device is  
shown to the video call recipient. A video call can only be  
made between two parties.  
Make a conference call  
1. To make a conference call, enter a participant's phone  
number, and press the call key.  
2. When the participant answers, select Options > New  
call.  
3. When you have made a phone call to all the  
participants, select Options > Conference to merge  
the calls into a conference call.  
Make a video call  
Warning: Do not hold the device near your ear  
when the loudspeaker is in use, because the volume may  
be extremely loud.  
To make a video call, enter the phone number or select the  
recipient of the call from Contacts, and select Options >  
Call > Video call. When the video call starts, the camera  
of the device is activated. If the camera is already in use,  
video sending is disabled. If the recipient of the call does  
not want to send a video back to you, a still image is shown  
instead. You can define the still image in Menu > Tools >  
Settings > Phone > Call > Image in video call.  
To mute the microphone of your device during the call,  
select Options > Mute.  
To drop a participant from the conference call, scroll to the  
participant, and select Options > Conference > Drop  
participant.  
To discuss privately with a conference call participant,  
Conference > Private.  
To make and receive fax calls, connect your device to a  
compatible computer or fax machine. To activate the fax  
33  
             
To disable the sending of audio, video, or video and audio,  
select Options > Disable > Sending audio, Sending  
video, or Sending aud. & video.  
Receive a video sharing invitation  
When you receive a video sharing invitation, a message is  
displayed showing the caller's name or SIP address.  
To use the loudspeaker for receiving audio, select  
Options > Activate loudspeaker. To mute the  
loudspeaker and use the earpiece, select Options >  
Activate handset.  
To accept the invitation and begin the sharing session,  
select Accept.  
To reject the invitation, select Reject. The voice call  
continues normally.  
To swap the places of images, select Options > Change  
image order.  
To zoom the image on the display, select Options >  
Net calls  
Zoom in or Zoom out.  
Select Menu > Connectivity > Internet tel..  
To end the video call and make a new voice call to the same  
Your device supports voice calls over the internet (net  
calls). Your device attempts emergency calls primarily over  
cellular networks. If an emergency call using cellular  
networks is not successful, your device attempts an  
emergency call through your net call provider. Due to the  
established nature of cellular telephony, you should use  
cellular networks for emergency calls, if possible. If you  
have cellular network coverage available, make sure that  
your cellular phone is switched on and ready to make calls  
before you attempt an emergency call. The capability for  
an emergency call using internet telephony depends on  
the availability of a WLAN and your net call provider's  
implementation of emergency call capabilities. Contact  
your net call provider to check the internet telephony  
emergency call capability.  
recipient, select Options > Switch to voice call.  
Share a video  
Use Video sharing (network service) to send live video or  
a video clip from your mobile device to another  
compatible mobile device during a voice call.  
1. Make a phone call to the selected recipient. You can  
start sharing a video once the phone call is established  
and your device has been registered to the SIP server.  
2. To send live video or a video clip from your device,  
select Options > Share video > Live or Clip. To  
preview the clip, select Options > Play.  
3. Select the recipient from Contacts, or enter the  
recipient's SIP address manually to send an invitation  
to the recipient. Sharing begins automatically when  
the recipient accepts the video sharing.  
With the net call service (network service), you can make  
and receive calls over the internet using the VoIP (voice  
over internet protocol) technology. Net calls can be  
established between computers, between mobile phones,  
and between a VoIP device and a traditional telephone. To  
make or receive a net call, your device must be within  
4. To end sharing the video, select Stop. The voice call  
continues normally.  
34  
         
WLAN coverage, for example. The availability of the net call net call service. If you login to the service manually, select  
service may vary according to your country or area.  
an available network from the list and Select.  
The list of networks is refreshed automatically every 15  
seconds. To refresh the list manually, select Options >  
Refresh. Use this option if your WLAN is not shown on the  
list.  
Create a net call profile  
Before you can make net calls, you need to create a net call  
profile.  
1. Select Menu > Tools > Settings > Connection >  
SIP settings > Options > New SIP profile, and enter  
the required information. To make the login to the net  
call service automatic, select Registration > Always  
on. Contact your net call provider for the correct  
settings.  
To select a net call service for outgoing calls if the device  
is connected to more than one service, select Options >  
Change service.  
To configure new services, select Options > Configure  
service. This option is shown only if there are services that  
have not been configured.  
2. Select Back until youreturnto the Connection settings  
To save the network to which you are currently connected,  
select Options > Save network. The saved networks are  
marked with a star on the list of networks.  
main view.  
3. Select Internet tel. > Options > New profile. Enter  
a name for the profile, and select the SIP profile you  
just created.  
To connect to a net call service using a hidden WLAN, select  
Options > Use hidden network.  
To set the created profile to be used automatically when  
connecting to the net call service, select Menu >  
Connectivity > Internet tel. > Preferred profile.  
To login to the net call service manually, select  
Registration > When needed in the SIP settings when  
creating a net call profile.  
To make secure net calls, ask your service provider for  
secure net call settings. The proxy server selected for the  
net call profile must support secure net calls.  
To end the connection to a net call service, select  
Options > Disconnect from serv..  
Make net calls  
You can make a net call from all applications where you  
can make a regular voice call. For example in Contacts,  
scroll to the desired contact, and select Call > Internet  
call.  
To make a net call in the standby mode, enter the SIP  
address, and press the call key.  
Connect to the net call service  
To make a net call to an address that does not start with  
a digit, press any number key when the device is in the  
standby mode, then press # for a few seconds to clear the  
display and to switch the device from the number mode  
To make or receive a net call, your device must be  
connected to a net call service. If you have selected  
automatic login, your device automatically connects to the  
35  
           
to the letter mode. Enter the address, and press the call  
key.  
To set net call as the preferred call type for outgoing calls,  
select Menu > Connectivity > Internet tel. >  
Options > Settings > Default call type > Internet  
call. When your device is connected to a net call service,  
all calls are made as net calls.  
To assign a number key to a phone number, select Menu >  
Tools > Speed dial. Scroll to the number key (2 - 9) on  
the display, and select Options > Assign. Select the  
desired number from Contacts.  
To delete the phone number assigned to a number key,  
scroll to the speed dialling key, and select Options >  
Remove.  
To modify a phone number assigned to a number key,  
scroll to the speed dialling key, and select Options >  
Change.  
Net call service settings  
Select Options > Settings, scroll to the settings of the  
desired service, and press the scroll key.  
To login automatically to the net call service, select Login  
type > Automatic. If you use the automatic login type  
for WLANs, the device periodically scans for WLANs, which  
increases the demand on battery power and reduces the  
battery life.  
Call divert  
Select Menu > Tools > Settings > Phone > Call  
divert.  
Divert incoming calls to your voice mailbox or to another  
To login manually to the net call service, select Login  
phone number. For details, contact your service provider.  
type > Manual.  
Select to divert voice or fax calls, and select from the  
following options:  
To view the networks you have saved for the net call  
service and the networks detected by the net call service,  
select Saved conn. networks.  
All voice calls or All fax calls — Divert all incoming  
voice or fax calls.  
If busy — Divert incoming calls when you have an  
active call.  
To define the service-specific settings, select Edit service  
settings. This option is only available if a service-specific  
software plug-in has been installed in the device.  
If not answered — Divert incoming calls after your  
device rings for a specified period of time. Select the  
time you let the device ring before diverting the call in  
the Delay time: list.  
Speed dialling  
If out of reach — Divert calls when the device is  
switched off or out of network coverage.  
If not available — Activate the last three settings at  
the same time. This option diverts calls if your device is  
busy, not answered, or out of reach.  
Select Menu > Tools > Settings > Phone > Call >  
Speed dialling > On.  
Speed dialling allows you to make a call by pressing and  
holding a number key in the standby mode.  
36  
           
To divert calls to your voice mailbox, select a call type and  
a diverting option, then select Options > Activate > To  
voice mailbox.  
Incoming calls when abroad — Prevent incoming  
calls when outside your home country.  
International calls except to home  
country — Prevent calls to foreign countries or regions,  
To divert calls to another phone number, select a call type  
and a diverting option, then select Options > Activate >  
To other number. Enter a number in the Number: field,  
or select Find to retrieve a number saved in Contacts.  
but allow calls to your home country.  
To check the status of voice call barrings, select the barring  
option and Options > Check status.  
To check the currentdivertingstatus, scroll to the diverting  
To stop all voice call barrings, select a barring option and  
option, and select Options > Check status.  
Options > Cancel all barrings.  
To stop diverting calls, scroll to the diverting option, and  
To change the password used for barring voice and fax  
calls, select Voice call barring > Options > Edit barring  
password. Enter the current code, then the new code  
twice. The barring password must be four digits long. For  
details, contact your service provider.  
select Options > Cancel.  
Call barring  
Select Menu > Tools > Settings > Phone > Call  
barring.  
Bar net calls  
You can bar the calls that can be made or received with  
the device (network service). To change the settings, you  
need the barring password from your service provider. Call  
barring affects all call types.  
Select Menu > Tools > Settings > Phone > Call  
barring > Internet call barring.  
To reject net calls from anonymous callers, select  
Anonymous call barring > On.  
Call barring and call diverting cannot be active at the same  
time.  
When calls are barred, calls may be possible to certain  
official emergency numbers.  
Send DTMF tones  
You can send dual tone multi-frequency (DTMF) tones  
during an active call to control your voice mailbox or other  
automated phone services.  
To bar calls, select Voice call barring and from the  
following options:  
Outgoing calls — Prevent making voice calls with your  
Send a DTMF tone sequence  
device.  
Incoming calls — Prevent incoming calls.  
International calls — Prevent calling to foreign  
countries or regions.  
1. Make a call, and wait until the other end answers.  
2. Select Menu > Options > Send DTMF.  
37  
           
3. Enter the DTMF tone sequence, or select a predefined  
sequence.  
Voice aid  
Attach a DTMF tone sequence to a contact card  
Select Menu > Tools > Voice aid.  
1. Select Menu > Contacts. Open a contact, and select  
The Voice aid application reads text on the display,  
allowing you to use the basic functions of your device  
without looking at the display.  
Options > Edit > Options > Add detail > DTMF.  
2. Enter the tone sequence. To insert a pause of about 2  
seconds before or between DTMF tones, enter p. To set  
the device to send the DTMF tones only after you select  
Send DTMF during a call, enter w.  
To hear the entries in your contacts list, select Contacts.  
Do not use this option if you have more than 500 contacts.  
To hear information on your missed and received calls,  
3. Select Done.  
dialled numbers, and frequent calls, select Recent calls.  
To listen to your voice messages, select Voice mailbox.  
Voice mail  
To dial a telephone number, select Dialler.  
Select Menu > Tools > Call mailbox.  
To hear the current time, select Clock > Time. To hear the  
current date, select Clock > Date.  
When you open the Voice mail application for the first  
time, you are asked to enter the number of your voice  
mailbox.  
To hear more options, select Options.  
To call your voice mail, select Options > Call voice  
mailbox.  
Voice commands  
If you have configured net call settings to your device and  
have an internet call mailbox, select Internet call  
mailbox > Options > Call voice mailbox to call it.  
Select Menu > Tools > Voice comm..  
Use voice commands to make phone calls and launch  
applications, profiles, or other functions on the device.  
To call your voice mail in the standby mode, press and hold  
1; or press 1 and then the call key. If you have defined an  
internet call mailbox, select whether you want to call your  
voice mail or internet call mailbox.  
The device creates a voice tag for the entries in Contacts  
and for the functions designated in the Voice commands  
application. When a voice command is spoken, the device  
compares the spoken words to the voice tag in the device.  
Voice commands are not dependent on a speaker’s voice;  
however, the voice recognition in the device adapts to the  
main user’s voice to recognise voice commands better.  
To change the voice mailbox number, select the mailbox  
and Options > Change number.  
To change the internet call mailbox address, select the  
38  
mailbox and Options > Change address.  
         
To launch an application using a voice command, press  
and hold the voice key, and clearly speak the name of the  
application. If the recognised application was not correct,  
select Next to view a list of other matches or Quit to  
cancel.  
Make a call  
A voice tag for a contact is the name or nickname that is  
saved on the contact in Contacts.  
Note: Using voice tags may be difficult in a noisy  
environment or during an emergency, so you should not  
rely solely upon voice dialing in all circumstances.  
To add more applications to the list, select Options >  
New application.  
To change the voice command of an application, select  
Options > Change command, and enter the new  
command.  
To listen to a voice tag, open a contact, and select  
Options > Play voice tag.  
1. To make a call using a voice command, press and hold  
the voice key.  
Change profiles  
2. When you hear the tone or see the visual display,  
clearly speak the name saved on the contact.  
The device creates a voice tag for each profile. To set on a  
profile using a voice command, press and hold the voice  
key, and say the name of the profile.  
3. The device plays a synthesised voice tag for the  
recognised contact in the selected device language,  
and displays the name and number. After a timeout of  
1.5 seconds, the device dials the number. If the  
recognised contact was not correct, select Next to view  
a list of other matches or Quit to cancel dialling.  
To change the voice command, select Profiles >  
Options > Change command.  
Voice command settings  
If several numbers are saved under the contact, the  
device selects the default number, if it has been set.  
Otherwise, the device selects the first available number  
of the following fields: Mobile, Mobile (home),  
Mobile (business), Telephone, Tel. (home), and Tel.  
(business).  
To switch off the synthesiser that plays recognised voice  
commands in the selected device language, select  
Settings > Synthesiser > Off.  
To reset voice recognition learning when the main user of  
the device has changed, select Remove voice adapts..  
Launch an application  
Log  
The device creates voice tags for the applications listed in  
the Voice commands application.  
Select Menu > Log.  
39  
                 
Log stores information about the communication history  
of the device. The device registers missed and received  
calls only if the network supports these functions, the  
device is switched on and within the network service area.  
To copy the number, for example to paste it to a text  
message, select Options > Copy number.  
To view a single type of communication event or  
communication events with one other party, select  
Options > Filter, and select the desired filter.  
To erase the contents of the log, recent calls register, and  
messaging delivery reports permanently, select  
Options > Clear log.  
Call and data registers  
To view recently missed, received, and dialled calls, select  
Recent calls.  
Tip: To open Dialled numbers in the standby  
modes, press the call key.  
Call and send messages from  
Log  
To view the approximate duration of calls to and from your  
device, select Call duration.  
To call back a caller, select Recent calls and open Missed  
calls, Received calls, or Dialled numbers. Select the  
caller, and Options > Call.  
To view the amount of data transferred during packet data  
connections, select Packet data.  
To reply to a caller with a message, select Recent calls and  
open Missed calls, Received calls, or Dialled numbers.  
Select the caller, and select Options > Create message.  
You can send text messages and multimedia messages.  
Monitor all communications  
To monitor all voice calls, text messages, or data  
connections registered by the device, open the general log  
tab.  
To view detailed information about a communication  
Log settings  
event, scroll to it, and press the scroll key.  
To set the time for keeping all communication events in  
the log, select Options > Settings > Log duration, and  
the time. If you select No log, all log contents are  
permanently deleted.  
Tip: Subevents, such as a text message sent in more  
than one part and packet data connections, are  
logged as one communication event. Connections  
to your mailbox, multimedia messaging centre, or  
web pages are shown as packet data connections.  
To add the phone number from a communication event to  
Contacts, select Options > Save to Contacts, and select  
to create a new contact or to add the phone number to an  
existing contact.  
Contacts  
Select Menu > Contacts.  
40  
                 
You can save and update contact information, such as  
phone numbers, home addresses, or e-mail addresses of  
your contacts. You can add a personal ringing tone or a  
thumbnail image to a contact. You can also create contact  
groups, which allow you to send text or e-mail messages  
to many recipients at the same time. You can add received  
contact information (business cards) to Contacts. Contact  
information can only be sent to or received from  
compatible devices.  
Manage contacts  
To add a new contact, select Options > New contact.  
To attach a small thumbnail image to a contact, select  
Options > Edit > Options > Add thumbnail. The  
thumbnail image is shown when the contact calls.  
To listen to the voice tag assigned to the contact, select  
Options > Play voice tag.  
To search for a contact, enter the first letters of the name  
to the search field. A list of the contacts starting with the  
letters appear on the display.  
Copy contacts between SIM  
and device memory  
To edit information in a contact, select Options > Edit.  
Tip: You can also use Nokia PC Suite to add and edit  
If you already have contacts saved on your SIM card, you  
can copy them to the device memory.  
contacts.  
To send contact information, select Options > Send.  
To copy contacts from a SIM card to the device memory,  
select Options > SIM contacts > SIM directory. Mark  
the contacts to copy, or select Options > Mark/  
Unmark > Mark all to copy all contacts. Select Options >  
Copy to Contacts.  
You can assign a default number or address to a contact  
so you can easily call or send a message to the default  
number or address, even if several numbers or addresses  
are saved to that contact. The default number is also used  
in voice dialling.  
To copy contacts from the device memory to a SIM card,  
select Options > Copy to SIM directory. Mark the  
contacts you want to copy, or select Options > Mark/  
Unmark > Mark all to copy all contacts. Select Options >  
Copy to SIM directory.  
To change the default information for a contact, open the  
contact, and select Options > Defaults. Select the  
number or address you want to set as a default. The  
default number or address is underlined in the contact.  
Tip: If you have saved contacts on your previous  
device, you can use the Transfer application to copy  
them. See "Transfer content between  
devices", p. 23.  
To add a contact to a group, select Options > Add to  
group (shown only if you have created a group).  
Tip: To check to which groups a contact belongs,  
select Options > Belongs to groups.  
To add a speed dial key to the contact's phone number,  
41  
select Options > Assign speed dial.  
       
To change the display order of the first and last names of  
To remove the assigned ringing tone, select Default  
your contacts, select Options > Settings, and Last name tone from the list of ringing tones.  
First name, or First name Last name.  
Send business cards  
Manage contact groups  
To send a business card, select the contact from Contacts,  
You can create a contact group so that you can send  
messages to several recipients at the same time.  
select Options > Send, and the sending method. Enter  
the phone number or address, or add a recipient from  
Contacts. Select Options > Send. If you select text  
message as the sending method, business cards are sent  
without thumbnail images.  
1. Open the contact groups tab, and select Options >  
New group.  
2. Enter a name for the group, and select OK.  
3. Open the group, and select Options > Add  
members.  
Manage received business  
cards  
4. Scroll to each contact you want to add to the group,  
and press the scroll key to mark it.  
To view a received business card, select Open from the  
displayed notification, or open the message from the  
Inbox folder in the Messaging application.  
5. Select OK to add all marked contacts to the group.  
To remove a contact from a contact group, scroll to the  
contact that you want to remove, and select Options >  
Remove from group.  
To save a received business card, select > Save business  
card.  
Add ringing tones for contacts  
SIM directory  
In the SIM directory, you can see the names and numbers  
stored on the SIM card; add, edit, or copy numbers to  
contacts; and make calls.  
To view a SIM contact, scroll to it, and press the scroll key.  
To add contacts to your SIM directory, select Options >  
New SIM contact. Enter the contact information and  
select Done.  
You can select a ringing tone for a contact or contact  
group. If the caller's phone number is sent with the  
incoming call and your device recognises the number, the  
ringing tone plays when the contact calls you.  
Select Options > SIM contacts > SIM directory.  
To select a ringing tone for a contact or contact group,  
open the contact or contact group, and select Options >  
Ringing tone. A list of ringing tones opens. Select the  
ringing tone you want to use.  
42  
                   
To view the list of fixed dialling numbers, select Options > You can create and view scheduled events and  
SIM contacts > Fixed dial contacts. This setting is only  
appointments. You can also set alarms for calendar  
entries. To synchronise your calendar data with a  
compatible computer, use Nokia PC Suite. See the Nokia PC  
Suite guide.  
shown if supported by your SIM card.  
To restrict calls from your device to selected phone  
numbers, select Options > Activate fixed dialling. You  
need your PIN2 code to activate and deactivate fixed  
dialling or edit your fixed dialling contacts. Contact your  
service provider if you do not have the code.  
To add new numbers to the fixed dialling list, select  
Options > New SIM contact. You need the PIN2 code for  
this function. When you use fixed dialling, packet data  
connections are not possible, except when sending text  
messages over a packet data connection. In this case, the  
message centre number and the recipient's phone number  
must be included on the fixed dialling list. When fixed  
dialing is activated, calls may be possible to the official  
emergency number programmed into your device.  
Create calendar entries  
You can create the following types of calendar entries:  
Meeting entries have a specific date and time.  
Memo entries are related to the whole day but not to  
a specific time of the day.  
Anniversary entries remind you of birthdays and  
special dates. They refer to a certain day but not a  
specific time of the day. Anniversary entries are  
repeated every year.  
To-do entries remind you of a task that has a due date  
To view your own numbers, if stored on the SIM card, select  
Options > My numbers. For example, you may have  
subscribed to two phone lines with the same SIM card. Not  
all SIM cards contain your own numbers.  
but not a specific time of the day.  
To create a calendar entry, scroll to a date, and select  
Options > New entry. Select the entry type. The available  
settings for meeting, memo, anniversary, and to-do  
entries vary.  
To edit the contact information, select Options > Edit.  
To copy the contact from the SIM directory to Contacts,  
Select from the following:  
select Options > Copy to Contacts.  
Subject or Occasion — Enter a description for the  
To check the amount of free memory on your SIM card,  
entry.  
select Options > SIM card details.  
Location — Enter the location information.  
Start time — Enter the start time.  
End time — Enter the end time.  
Start date or Date — Enter the start date or date the  
event occurs.  
Calendar  
Select Menu > Calendar.  
End date — Enter the end date.  
43  
     
Alarm — Set an alarm for meeting and anniversary  
entries. The alarm is displayed in the day view.  
Repeat — Specify whether you want the entry to be  
repeated and when. Define the repeat type, frequency,  
and possible ending date.  
To add a received calendar entry to your calendar, open  
the calendar entry attachment in the message, and select  
Options > Save to Calendar.  
To respond to a received calendar entry, select Accept,  
Tentative, or Decline, if available. If you accept the entry  
or mark it as tentative, the entry is added to your calendar.  
You can send a response to the sender of the calendar  
entry by e-mail. Select Yes, and the message is saved in  
Outbox to wait for sending.  
Synchronisation — If you select Private, the calendar  
entry can be seen only byyou and is notshown to others  
with online access to view the calendar. If you select  
Public, the calendar entry is shown to others who have  
access to view your calendar online. If you select  
None, the calendar entry is not copied to your  
computer when you synchronise.  
Create a meeting entry  
Tip: Make sure you have selected the correct city in  
the Clock application, because scheduled calendar  
entries may change when the current city is  
changed and is on another time zone.  
1. Scroll to a date, and select Options > New entry >  
Meeting.  
2. Enter the subject, location, start and end time, and the  
start and end dates, if needed.  
To edit an existing entry, scroll to the entry, and select  
3. To set an alarm for the meeting, select Alarm > On.  
Options > Open. Edit the details in the various fields.  
Enter the alarm time and date.  
To delete a calendar entry, select Options > Delete, and  
select Before date to delete all entries before the selected  
date, or All entries to delete all calendar entries from the  
device.  
4. Select whether this is a repeating meeting.  
5. Define how the entry is handled during  
synchronisation in the Synchronisation field. Select  
Private to hide the entry from viewers if the calendar  
is available online, Public to make the entry visible to  
viewers if the calendar is available online, or None to  
prevent copying the entry to your computer when you  
synchronise.  
Tip: When you edit or delete a repeated entry,  
choose how you want the change to take effect. If  
you select All calendar entries deleted, all  
repeated entries are deleted. If you select Delete  
entry, only the current entry is deleted.  
To send a calendar entry to a compatible device, select  
Options > Send > Via text message, Via  
To-do entries  
multimedia, Via e-mail, Via Bluetooth, or Via  
You can create and maintainatask or listof tasks thatmust  
be done by a certain day. Each task can be assigned a due  
date, and an alarm.  
infrared. If the other device is not compatible with  
44 Coordinated Universal Time (UTC), the time information of  
received calendar entries may not be displayed correctly.  
     
To view a specific date, select Options > Go to date, and  
Create a to-do entry  
enter the date.  
1. Scroll to a date, and select Options > New entry >  
To-do.  
Month view  
2. Enter the subject in the Subject field.  
Select Options > Month view.  
3. Enter the due date.  
In the month view, you can see the entire month at one  
time. Each row shows one week of dates. The active month  
is displayed, and the active day is either today or the last  
day that was viewed. The active day is marked with a  
coloured square. Days that have scheduled events are  
marked with a small triangle. Press the scroll key to open  
the day's entry.  
4. To set an alarm for the to-do entry, select Alarm >  
On. Enter the alarm time and date.  
5. Specify a priority. The priority icons are ( ! ) High and  
( - ) Low. There is no icon for Normal.  
6. Define how the entry is handled during  
synchronisation in the Synchronisation field. Select  
Private to hide the entry from viewers if the calendar  
is available online, Public to make the entry visible to  
viewers if the calendar is available online, or None to  
not copy the entry to your computer when you  
synchronise.  
Week view  
Select Options > Week view.  
The week view shows the events for the selected week in  
seven day boxes. Today's date is marked with a coloured  
square. Memos and anniversaries are placed before 8:00  
a.m.  
Calendar views  
To change the starting day of the week, select Options >  
The Calendar has four views: in the month view, you can  
see the entire month at one time; the week view shows  
the events for the selected week in seven day boxes; the  
day view shows the events for the selected day; and the  
to-do view shows the to-do items for the selected day.  
Settings > Week starts on.  
Day view  
Scroll to a day and press the scroll key. The day view shows  
the events for the selected day. Entries are grouped into  
time slots according to their starting time. To view the  
previous or next day, scroll left or right.  
Work in different views  
To switch between the different calendar views, select  
Options in any calendar view. Select the type of view from  
the list.  
To-do view  
Select Options > To-do view.  
To set the default calendar view, select Options >  
The to-do view shows the to-do items for the selected day.  
45  
Settings > Default view, and the view you want.  
                   
To mark a task as completed, select Options > Mark as  
Check the availability of services, pricing, and fees with  
your service provider. Service providers also give you  
instructions on how to use their services.  
done.  
To restore a task, select Options > Mark as not done.  
Connection security  
Calendar settings  
If the security indicator ( ) is displayed during a  
connection, the data transmission between the device and  
the internet gateway or server is encrypted. The security  
icon does not indicate that the data transmission between  
the gateway and the content server (or place where the  
requested resource is stored) is secure. The service  
provider secures the data transmission between the  
gateway and the content server.  
Select Options > Settings.  
To change the alarm tone, select Calendar alarm tone.  
To change the view displayed when you open the  
calendar, select Default view.  
To change the first day of the week, select Week starts  
on.  
To change the week view title, select Week view title and  
Security certificates may be required for some services,  
such as banking services. You are notified if the identity of  
the server is not authentic or if you do not have the correct  
security certificate in your device. For more information,  
contact your service provider.  
Week number or Week dates.  
Web  
Select Menu > Web.  
Browse the web  
To browse the web (network service), you need to  
configure the internet access point settings. If you are  
using a GPRS connection, your wireless network must  
support GPRS, and the service must be activated for your  
SIM card.  
To browse the web, select a bookmark or enter the web  
address manually, and select Go to. Use only services that  
you trust and that offer adequate security and protection  
against harmful software.  
Tip: You may receive the internet access point  
settings from your service provider as a special text  
message or from the service provider's web pages.  
You can also enter the internet access point settings  
manually. See "Internet access points", p. 94.  
Tip: When you start to enter the address, the  
addresses of the pages you have previously visited  
that match your input are displayed. To open a  
page, scroll to its address, and press the scroll key.  
To move on a web page, use the scroll key, which is shown  
as a pointer on the page. When you move the pointer over  
a link, the pointer changes into a hand. Press the scroll key  
46  
             
to open the link. On a web page, new links usually appear To empty the cache, select Options > Clear privacy  
underlined in blue and previously visited links in purple.  
Images that act as links have a blue border around them.  
data > Clear cache.  
The addresses of the pages you visit are saved in the Auto.  
Feeds and blogs  
bookmarks folder.  
Select Menu > Web > Web feeds.  
Feeds usually contain headlines and articles, often about  
Bookmarks  
recent news or other topics. Blog is a shortening of  
Your device may have preinstalled bookmarks and links for weblog, which is a continuously updated web diary.  
third-party internet sites. You may also access other third-  
To download a feed or blog, scroll to it, and press the scroll  
party sites through your device. Third-party sites are not  
key.  
affiliated with Nokia, and Nokia does not endorse or  
To add or edit a feed or blog, select Options > Manage  
assume liability for them. If you choose to access such  
feed > New feed or Edit.  
sites, you should take precautions for security or content.  
To view a bookmarked web page, scroll to the bookmark,  
and press the scroll key.  
End a connection  
To browse to another web page, select Options >  
Navigation options > Go to web address, enter the  
page address, and select Go to.  
To end the connection and view the browser page offline,  
select Options > Tools > Disconnect. To end the  
connection and close the browser, select Options >  
Exit.  
To add a bookmark, select Options > Bookmark  
manager > Add bookmark.  
To organise your bookmarks, select Options >  
Bookmark manager in the Web main view. You can move  
and edit bookmarks, and create new folders.  
Web settings  
Select Menu > Web > Options > Settings.  
The Web settings are divided into four groups:  
General contains access point and home page related  
Clear the cache  
settings.  
A cache is a memory location that is used to store data  
temporarily. If you have tried to access or have accessed  
confidential information requiring passwords, empty the  
cache after each use. The information or services you have  
accessed are stored in the cache.  
Page contains imaging, audio, and pop-up settings.  
Privacy contains settings related your privacy.  
47  
Web feeds contains settings related to web feeds and  
blogs.  
                   
Messaging  
Select Menu > Messaging.  
Messaging folders  
In Messaging (network service), you can send and receive  
text messages, multimedia messages, audio messages,  
and e-mail messages. You can also receive web service  
messages, cell broadcast messages, and special messages  
containing data, and send service commands.  
Messages and data received using Bluetooth connectivity  
or infrared are stored in the Inbox folder. E-mail messages  
are stored in Mailbox. Messages that you have been  
writing can be stored in the Drafts folder. Messages that  
are waiting to be sent are stored in the Outbox folder, and  
messages that have been sent, excluding Bluetooth and  
infrared messages, are stored in the Sent folder.  
Before sending or receiving messages, you may need to  
do the following:  
Insert a valid SIM card in the device and be located in  
the service area of a cellular network.  
Tip: Messages are placed in Outbox, for example,  
when your device is outside network coverage. You  
can also schedule e-mail messages to be sent the  
next time you connect to your remote mailbox.  
Verify that the network supports the messaging  
features you want to use and that they are activated on  
your SIM card.  
Define the internet access point settings on the device.  
Note: The message sent icon or text on your device  
screen does not indicate that the message is received at  
the intended destination.  
the text messages and multimedia messages you have  
sent (network service), selectOptions > Settings > Text  
message or Multimedia message > Receive report.  
The reports are saved in the Reports folder.  
See "Internet access points", p. 94.  
Define the e-mail account settings on the device. See  
"E-mail account settings", p. 59.  
Define the text message settings on the device. See  
"Text message settings", p. 58.  
Define the multimedia message settings on the device.  
See "Multimedia message settings", p. 58.  
The device may recognise the SIM card provider and  
automatically configure some of the message settings. If  
not, you may need to define the settings manually; or  
contact your service provider to configure the settings.  
48  
     
To end the reading, press the end key.  
Organise messages  
To create a new folder to organise your messages, select  
Speech  
My folders > Options > New folder.  
To rename a folder, select Options > Rename folder. You  
Select Menu > Tools > Speech.  
can only rename folders that you have created.  
With Speech, you can set the language, voice, and voice  
properties for the message reader.  
To move a message to another folder, select Options >  
Move to folder, the folder, and OK.  
To sort messages in a specific order, select Options > Sort  
by. You can sort the messages by Date, Sender, Subject,  
or Message type.  
Edit the voice properties  
To set the language for the message reader, select  
Language. To download additional languages to your  
device, visit the Nokia web site or use the Download!  
application.  
To view the properties of a message, select the message  
and Options > Message details.  
To set the speaking voice, select Voice. The voice is  
language-dependent.  
Message reader  
To set the speaking rate, select Voice settings > Speed.  
The message reader reads received text, multimedia, and  
e-mail messages aloud. The message reader cannot read  
e-mail messages in add-on e-mail applications.  
To set the speaking volume, select Voice settings >  
Volume.  
To listen to a voice, open the voice tab, select the voice,  
To play a message, press and hold the left selection key  
and select Options > Play voice.  
when you receive a message.  
To start reading a message in Inbox or mailbox, select  
Options > Listen.  
E-mail messages  
To start reading the next message in Inbox or mailbox,  
scroll down. To start reading the message again, scroll up.  
In the beginning of the message, scroll up to hear the  
previous message.  
Select Menu > Messaging > Mailbox.  
To receive and send e-mail, you must have a remote  
mailbox service. This service may be offered by an internet  
service provider, a network service provider, or your  
company. Your device is compliant with internet  
standards SMTP, IMAP4 (revision 1), and POP3, and with  
To pause the reading, press the left selection key briefly.  
49  
To continue, press the left selection key briefly again.  
               
different vendor-specific e-mail solutions. Other e-mail  
providers may offer services with different settings or  
features than those described in this user guide. Contact  
your e-mail provider or service provider for more details.  
mail server. You can then choose which  
messages to download to your device.  
3. In My e-mail address, enter your e-mail address.  
Select Next.  
Before you can send, receive, retrieve, reply to, and  
forward e-mail on your device, you must also do the  
following:  
4. In Incoming mail server, enter the name of the  
remote server that receives your e-mail, and select  
Next.  
Configure an internet access point. See "Internet access  
5. In Outgoing mail server, enter the name of the  
remote server that sends your e-mail, and select  
Next. Depending on your mobile operator, you might  
have to use your mobile operator's outgoing mail  
server instead of your e-mail provider's.  
points", p. 94.  
Set up an e-mail account, and define the e-mail settings  
correctly. To do this, use the mailbox guide, or define  
the account manually. See "E-mail account  
settings", p. 59.  
6. In Access point, select the internet access point your  
device should use when it retrieves the e-mail. If you  
select Always ask, each time the device starts to  
retrieve e-mail, it asks which internet access point it  
should use. Select Next.  
Contact your service provider for the correct settings.  
7. Enter a name for your new mailbox, and select  
Finish.  
If you select Menu > Messaging > Mailbox, and have  
not set up your e-mail account, you are prompted to do  
so. To start setting up the e-mail account with the mailbox  
guide, select Yes.  
When you create a new mailbox, the name you give to the  
mailbox replaces Mailbox in the Messaging main view.  
You can have up to six mailboxes.  
If you have defined several mailboxes, select one of them  
as your default mailbox. That mailbox is used every time  
you start composing a new e-mail message. To define the  
default mailbox, select Options > Settings > E-mail >  
Default mailbox and the mailbox.  
1. To start entering the e-mail settings, select Start.  
2. In Mailbox type, select IMAP4 or POP3, and select  
Next.  
Tip: POP3 is a version of the post office protocol  
that is used to store and retrieve e-mail or  
internet mail messages from a server. IMAP4 is  
a version of the internet message access  
Connect to a remote mailbox  
protocol that lets you access and manage e-mail  
messages while the messages are still on the e-  
E-mail addressed to you is not automatically received by  
your device, but by your remote mailbox. To read your e-  
50  
       
mail, you must first connect to the remote mailbox; then  
select the e-mail messages you wish to retrieve into your  
device.  
To reply to all recipients of an e-mail, select Options >  
Reply > To all.  
Tip: If you reply to an e-mail that contains attached  
files, the attachments are not included in the reply.  
If you forward the received e-mail, the attachments  
are included.  
1. To retrieve received e-mail messages to your device  
and view them, select your mailbox in the Messaging  
main view. When the device asks Connect to  
mailbox?, select Yes.  
To forward an e-mail, select Options > Forward.  
2. Enter your user name and password, if prompted.  
To attach a file to an e-mail message, select Options >  
3. Select Options > Retrieve e-mail > New to retrieve  
new messages that you have neither read nor  
retrieved, Selected to retrieve only messages you  
select from the remote mailbox, or All to retrieve all  
messages not previously retrieved.  
Insert and the attachment you want to add.  
To delete an attachment from an e-mail that you are  
sending, select the attachment and Options > Remove.  
To set the message priority, select Options > Sending  
options > Priority.  
4. To manage your e-mail offline to save in connection  
costs and work in conditions that do not allow a data  
connection, select Options > Disconnect to  
disconnect from the remote mailbox. Any changes you  
make in the remote mailbox folders while offline, take  
effect in your remote mailbox the next time you go  
online and synchronise.  
To set the sending time for the e-mail message, select  
Options > Sending options > Send message. Select  
Immediately, or select When conn. avail. if you are  
working offline.  
To call the sender of the e-mail message, if the sender can  
be found in Contacts, select Options > Call.  
To reply to the sender of the e-mail with an audio message  
or multimedia message, select Options > Create  
message.  
Read and reply to e-mail  
Important: Exercise caution when opening  
messages. E-mail messages may contain malicious  
software or otherwise be harmful to your device or PC.  
Write and send e-mail  
1. To write an e-mail, select New message > E-mail.  
To read a received e-mail, open it from the mailbox.  
2. Select Options > Add recipient to select the  
recipients' e-mail addresses from Contacts, or enter the  
e-mail addresses in the To field. Use a semicolon to  
separate entries. Use the Cc field to send a copy to other  
To open an attachment, select Options > Attachments.  
Scroll to the attachment, and press the scroll key.  
51  
To reply only to the sender of an e-mail, select Options >  
Reply > To sender.  
       
recipients, or the Bcc field to send a blind copy to  
folders are updated. This may take some time if the folders  
are large.  
recipients.  
3. In the Subject field, enter the subject of the e-mail.  
To update the list of folders, select a folder and Options >  
Update folder list.  
4. Enter your e-mail message in the text area, and select  
Options > Send.  
Text messages  
Delete messages  
Select Menu > Messaging.  
To free up memory space on your device, regularly delete  
messages from the Inbox and Sent folders, and delete  
retrieved e-mail messages.  
Write and send text messages  
To delete e-mail from the device only, and keep the  
original on the server, select Options > Delete > Phone  
(header remains).  
Select Menu > Messaging.  
Your device supports the sending of text messages beyond  
the limit for a single message. Longer messages are sent  
as two or more messages. Your service provider may  
charge accordingly. Characters with accents or other  
marks, and characters from some language options, take  
up more space, and limit the number of characters that  
can be sent in a single message.  
To delete e-mail both from the device and the remote  
server, select Options > Delete > Phone and server.  
To cancel the deleting, select Options > Restore.  
Subfolders in your remote e-  
mail  
1. To write a text message, select New message > Text  
message.  
2. In the To field, enter a recipient's number, or press the  
scroll key to add a recipient from Contacts. If you enter  
more than one number, separate the numbers with a  
semicolon.  
If you create subfolders in your IMAP4 mailboxes on a  
remote server, you can view and manage these folders  
with your device when you subscribe to them. Youcanonly  
subscribe to folders in your IMAP4 mailboxes.  
3. Enter the text of the message. To use a template, select  
To view folders in your IMAP4 mailbox, establish a  
connection, and select Options > E-mail settings >  
Retrieval settings > Folder subscriptions.  
Options > Insert > Template.  
4. Select Options > Send.  
To view a remote folder, select a folder and Options >  
52  
Subscribe. Every time you go online, the subscribed  
             
2. Select Options > Copy.  
Sending options for text  
messages  
3. Select a folder and OK to begin copying.  
To view SIM card messages, open the folder where you  
To select a message centre to send the message, select  
Options > Sending options > Message centre in  
use.  
copied the messages, and open a message.  
View picture messages  
To have the network send you delivery reports on your  
messages (network service), select Options > Sending  
options > Receive report > Yes.  
To define how long the message centre resends your  
message (network service) if the first attempt fails, select  
Options > Sending options > Message validity. If the  
recipient cannot be reached within the validity period, the  
message is deleted from the message centre.  
To convert the message to another format, select  
Options > Sending options > Message sent as >  
Text, Fax, Paging, or E-mail. Change this option only if  
you are sure that your message centre is able to convert  
text messages into these other formats. Contact your  
service provider.  
Note: The picture message function can be used  
only if it is supported by your service provider. Only  
compatible devices that offer picture message features  
can receive and display picture messages. The appearance  
of a message may vary depending on the receiving device.  
To view a picture message, open the message from the  
Inbox folder.  
To view information about the picture message, select  
Options > Message details.  
To save a message in a different folder, select Options >  
Move to folder.  
To add the sender of the message to Contacts, select  
Options > Save to Contacts.  
Text messages on the SIM card  
Select Options > SIM messages.  
Forward picture messages  
Text messages may be stored on your SIM card. Before you  
can view SIM messages, you must copy the messages to a  
folder in the device. After copying the messages to a folder,  
you can view them in the folder or delete them from the  
SIM card.  
1. To forward the message, open the message from the  
Inbox folder and select Options > Forward.  
2. In the To field, enter a recipient's number, or press the  
scroll key to add a recipient from Contacts. If you enter  
more than one number, separate the numbers with a  
semicolon.  
1. Select Options > Mark/Unmark > Mark or Mark  
53  
all to mark every message.  
               
3. Enter the text of your message. To use a template,  
2. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient from  
Contacts. If you enter more than one number or e-mail  
address, separate them with a semicolon.  
select Options > Insert > Template.  
4. Select Options > Send.  
Tip: To remove the picture from the message, select  
3. In the Subject field, enter a subject for the message.  
To change the fields that are visible, select Options >  
Address fields.  
Options > Remove picture.  
4. Enter the text of the message, and select Options >  
Insert object to add media objects. You can add  
objects such as Image, Sound clip, or Video clip.  
Multimedia messages  
Select Menu > Messaging.  
The wireless network may limit the size of MMS  
messages. If the inserted picture exceeds this limit, the  
device may make it smaller so that it can be sent by  
MMS.  
Only devices that have compatible features can receive  
and display multimedia messages. The appearance of a  
message may vary depending on the receiving device.  
A multimedia message (MMS) can contain text and objects  
such as images, sound clips, or video clips. Before you can  
send or receive multimedia messages on your device, you  
must define the multimedia message settings. Your device  
may have recognised the SIM card provider and  
automatically configured the multimedia message  
settings. If not, use Settings wizard, or contact your service  
provider for the correct settings. See "Multimedia message  
settings", p. 58.  
5. Each slide of your message can contain only one video  
or sound clip. To add more slides to your message,  
select Options > Insert new > Slide. To change the  
order of slides in your message, select Options >  
Move.  
6. To preview a multimedia message before sending it,  
select Options > Preview.  
7. Select Options > Send.  
To delete an object from a multimedia message, select  
Create and send multimedia  
messages  
Options > Remove.  
To set the sending options for the current multimedia  
message, select Options > Sending options.  
1. To create a new message, select New message >  
Multimedia message.  
54  
     
Settings > Multimedia message > MMS creation  
Receive and reply to  
multimedia messages  
mode > Free.  
1. To create a presentation, select New message >  
Multimedia message.  
2. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient from  
Contacts. If you enter more than one number or e-mail  
address, separate them with a semicolon.  
Important: Exercise caution when opening  
messages. Messages may contain malicious software or  
otherwise be harmful to your device or PC.  
Tip: If you receive multimedia messages that  
contain objects unsupported by your device, you  
cannot open them. Try to send these objects to  
another device such as a computer, and open them  
there.  
3. Select Options > Create presentation and a  
presentation template. A template may define which  
media objects you can include in the presentation,  
where they appear, and which effects are displayed  
between images and slides.  
1. To reply to a multimedia message, open the message,  
4. Scroll to the text area and enter the text.  
and select Options > Reply.  
5. To insert images, sound, video, or notes in your  
presentation, scroll to the corresponding object area,  
and select Options > Insert.  
2. Select Options and To sender to reply to the sender  
with a multimedia message, Via text message to  
reply with a text message, Via audio message to reply  
with an audio message, or Via e-mail to reply with an  
e-mail message.  
6. To add slides, select Insert > New slide.  
To select the background colour for the presentation and  
background images for different slides, select Options >  
Background settings.  
Tip: To add recipients to your reply, select  
Options > Add recipient to select the  
recipients of the message from Contacts, or  
enter the recipients' phone numbers or e-mail  
addresses manually in the To field.  
To set effects between images or slides, select Options >  
Effect settings.  
To preview the presentation, select Options > Preview.  
Multimedia presentations may only be viewed in  
compatible devices that support presentations. They may  
appear different in different devices.  
3. Enter the text of the message, and select Options >  
Send.  
Create presentations  
Creating multimedia presentations is not possible if the  
MMS creation mode setting is set to Restricted. To  
change the setting, select Messaging > Options >  
55  
       
View presentations  
Forward a multimedia  
message  
To view a presentation, open the multimedia message  
from the Inbox folder. Scroll to the presentation, and press  
the scroll key.  
Open Inbox, scroll to a multimedia notification, and press  
the scroll key. To send the message to a compatible device  
without retrieving it to your device, select Options >  
Forward. If the server does not support multimedia  
message forwarding, this option is not available.  
To pause the presentation, press either selection key.  
To resume playing the presentation, select Options >  
Continue.  
1. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient from  
Contacts. If you enter more than one number or e-mail  
address, separate them with a semicolon.  
If the text or images are too large to fit on the display,  
select Options > Activate scrolling, and scroll to see the  
entire presentation.  
To find phone numbers and e-mail or web addresses in the  
presentation, select Options > Find. You may use these  
numbers and addresses to make calls, send messages, or  
create bookmarks, for example.  
2. Edit the message, if desired, and select Options >  
Send.  
Tip: To edit the delivery settings of the message,  
select Options > Sending options.  
View and save multimedia  
attachments  
Send a sound clip  
1. To compose an audio message, select New  
To view multimedia messages as complete presentations,  
open the message, and select Options > Play  
presentation.  
message > Audio message.  
2. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient from  
Contacts. If you enter more than one number or e-mail  
address, separate them with a semicolon.  
Tip: To view or play a multimedia object in a  
multimedia message, select View image, Play  
sound clip, or Play video clip.  
3. Select Options > Insert sound clip, and select  
whether to record a sound clip or select one from  
Gallery.  
To view the name and size of an attachment, open the  
message, and select Options > Objects.  
4. Select Options > Send.  
To save a multimedia object, select Options > Objects,  
the object, and Options > Save.  
56  
           
Sending options for  
Select New message > Multimedia message >  
Options > Sending options and from the following  
options:  
Service messages  
Service messages are sent to your device by service  
providers. Service messages may contain notifications  
such as news headlines, services, or links through which  
the message content can be downloaded.  
multimedia messages  
To define the service message settings, select Options >  
Receive report — Select Yes if you want to receive a  
notification when the message has been successfully  
delivered to the recipient. Receiving a delivery report  
of a multimedia message that has been sent to an e-  
mail address may not be possible.  
Settings > Service message.  
To download the service or message content, select  
Options > Download message.  
To view information about the sender, web address,  
expiration date, and other details of the message before  
downloading it, select Options > Message details.  
Message validity — Select how long the messaging  
centre tries to send the message. If the recipient of a  
message cannot be reached within the validity period,  
the message is removed from the multimedia  
messaging centre. The network must support this  
feature. Maximum time is the maximum amount of  
time allowed by the network.  
Send service commands  
You can send a service request message (also known as a  
USSD command) to your service provider and request  
activation for certain network services. Contact your  
service provider for the service request text.  
Special message types  
To send a service request message, select Options >  
Service command. Enter the service request text and  
select Options > Send.  
Select Menu > Messaging.  
You can receive special messages that contain data, such  
as operator logos, ringing tones, bookmarks, or internet  
access or e-mail account settings.  
Cell broadcast  
To save the contents of these messages, select Options >  
Save.  
Select Menu > Messaging > Options > Cell  
broadcast.  
With the cell broadcast network service, you can receive  
messages on various topics from your service provider,  
such as weather or traffic conditions in a particular region.  
57  
               
For available topics and relevant topic numbers, contact  
your service provider. Cell broadcast messages cannot be  
received when the device is in the remote SIM mode. A  
packet data (GPRS) connection may prevent cell broadcast  
reception.  
Text message settings  
Select Options > Settings > Text message.  
Select from the following:  
Message centres — View the available message  
centres for your device, or create a new one.  
Message centre in use — Select a message centre to  
send the message.  
Cell broadcast messages cannot be received in UMTS (3G)  
networks.  
To receive cell broadcast messages, you may need to set  
the cell broadcast reception on. Select Options >  
Settings > Reception > On.  
Character encoding — Select Reduced support to use  
automatic character conversion to another encoding  
system when available.  
To view messages related to a topic, select the topic.  
Receive report — Select Yes if you want the network  
to send you delivery reports on your messages  
(network service).  
To receive messages related to a topic, select Options >  
Subscribe.  
Message validity — Select how long the message  
centre resends your message if the first attempt fails  
(network service). If the recipient cannot be reached  
within the validity period, the message is deleted from  
the message centre.  
Tip: You can set important topics as hot topics.  
While the device is in the standby mode, you are  
notified when you receive a message related to a  
hot topic. Select a topic, and select Options >  
Hotmark.  
Message sent as — Convert the message to another  
format, such as Text, Fax, Paging, or E-mail. Change  
this option only if you aresure thatyour messagecentre  
is able to convert text messages into these other  
formats. Contact your service provider.  
To add, edit, or delete topics, select Options > Topic.  
Messaging settings  
Preferred connection — Select the preferred method  
of connection when sending text messages from your  
device.  
Select Menu > Messaging > Options > Settings.  
Fill in all fields marked with Must be defined or with a red  
Reply via same centre — Select whether you want the  
reply message to be sent using the same text message  
centre number (network service).  
asterisk.  
Your device may recognise the SIM card provider and  
configure the correct text message, multimedia message,  
and GPRS settings automatically. If not, contact your  
service provider for the correct settings, order the settings  
from your service provider in a configuration message, or  
use the Settings wizard application.  
Multimedia message settings  
58  
Select Options > Settings > Multimedia message.  
         
Select from the following:  
Deny report sending — Select Yes to not send delivery  
reports from your device for received multimedia  
messages.  
Image size — Select Small or Large to scale images in  
multimedia messages. Select Original to maintain the  
original image size.  
Message validity — Select how long the messaging  
centre tries to send the message (network service). If  
the recipient of a message cannot be reached within  
the validity period, the message is removed from the  
multimedia messaging centre. Maximum time is the  
maximum amount of time allowed by the network.  
MMS creation mode — Select Restricted to have your  
device prevent you from including content in  
multimediamessagesthat maynot be supported by the  
network or the receiving device. To receive warnings  
about including such content, select Guided. To create  
a multimedia message with no restrictions on  
attachment type, select Free. If you select Restricted,  
creating multimedia presentations is not possible.  
Access point in use — Select the default access point  
to connect to the multimedia message centre. You may  
not be able to change the default access point if it is  
preset in your device by your service provider.  
Multimedia retrieval — Select Always automatic to  
receive multimedia messages always automatically,  
Auto in home netw. to receive notification of a new  
multimedia message that you can retrieve from the  
message centre (for example, when you are travelling  
abroad and are outside your home network), Manual  
to retrieve multimedia messages from the message  
centre manually, or Off to prevent receipt of any  
multimedia messages.  
E-mail account settings  
Select Menu > Messaging > Options > Settings > E-  
mail.  
If you try to edit mailbox settings but have not set up an  
e-mail account, the mailbox guide opens and helps you set  
up your e-mail account.  
If you have defined a mailbox, scroll to it, and press the  
scroll key to edit the settings.  
The settings available for editing may vary. Some settings  
may be preset by your service provider.  
Connection settings  
To define the connection settings, select an e-mail account  
and Options > Edit > Connection settings. To edit the  
settings for the e-mail you receive, select Incoming e-  
mail. To edit the settings for the e-mail you send, select  
Outgoing e-mail.  
Allow anon. msgs. — Select whether you want to  
receive messages from unknown senders.  
Receive adverts — Select whether you want to receive  
messages defined as advertisements.  
Receive report — Select Yes to have the status of the  
sent message to be shown in the log (network service).  
Receiving a delivery report of a multimedia message  
that has been sent to an e-mail address may not be  
possible.  
User settings  
To define the user settings for an e-mail account, select  
the account, select Options > Edit > User settings, and  
define the following settings:  
59  
         
My name — Enter a name to appear before your e-mail  
address when you send e-mail.  
Retrieval amount — Select the number of e-mail  
messages you want to retrieve from the remote server  
to your mailbox.  
Reply-to — Select whether you want replies to be  
redirected to a different address. Select On, and enter  
the e-mail address to which you want to direct the  
replies. You can only enter one address to which replies  
are directed.  
IMAP4 folder path — Define the folder path for folders  
to be subscribed. This setting is for IMAP4 mailboxes  
only.  
Folder subscriptions — Subscribe to other folders in  
the remote mailbox and retrieve content from those  
folders. This setting is for IMAP4 mailboxes only.  
Delete e-mails from — Select whether you want to  
delete the e-mail messages only from the device or  
from both the device and the server. Select Always  
ask if you want to confirm from where the e-mail  
should be deleted every time you delete an e-mail.  
Send message — Select to send the e-mail  
immediately or when a connection is available.  
Send copy to self — Select whether you want to save  
a copy of the e-mail to your remote mailbox and to the  
address defined in My e-mail address in the Outgoing  
e-mail settings.  
Automatic retrieval settings  
To define the automatic retrieval settings for an e-mail  
account, select the account, select Options > Edit >  
Automatic retrieval, and define the following settings:  
E-mail retrieval — Select Enabled to retrieve new e-  
mail messages automatically from your remote  
mailbox, or Only in home netw. to retrieve new e-mail  
messages automatically from your remote mailbox  
only when you are in your home network and not, for  
example, travelling.  
Include signature — Select whether you want to  
attach a signature to your e-mail messages.  
New e-mail alerts — Select whether you want to be  
notified of a new received e-mail message with a tone  
and a note.  
Retrieval days — Select the days on which e-mail is  
retrieved to your device.  
Retrieval hours — Define the hours between which  
the e-mail is retrieved.  
Retrieval settings  
Retrieval interval — Select the interval between  
retrieving new e-mail messages.  
To define the retrieval settings, select the e-mail account,  
select Options > Edit > Retrieval settings, and define  
the following settings:  
E-mail notifications — Select whether you want to  
receive notifications on received e-mail.  
E-mail to retrieve — Select whether you want to  
retrieve only the e-mail header information such as  
sender, subject and date, e-mail, or e-mail with  
attachments. This setting is for POP3 mailboxes only.  
Service message settings  
Select Menu > Messaging > Options > Settings >  
60  
Service message.  
           
To receive service messages from service providers, select  
Memory in use — Select where to save your messages.  
You can save messages to the memory card only if a  
memory card is inserted.  
Service messages > On.  
To select how to download services and service message  
content, select Options > Settings > Service  
message > Download messages > Automatically or  
Manually. If you select Automatically, you may still need  
to confirm some downloads since not all services can be  
downloaded automatically.  
Folder view — Define how you want the messages in  
Inbox to be shown.  
Cell broadcast settings  
Select Menu > Messaging > Options > Settings >  
Cell broadcast.  
To receive cell broadcast messages, select Reception >  
On.  
To select the languages in which you want to receive cell  
broadcast messages, select Language.  
To display new topics in the cell broadcast topics list, select  
Topic detection > On.  
Other settings  
Select Menu > Messaging > Options > Settings >  
Other.  
Select from the following:  
Save sent messages — Select whether to store sent  
messages in the Sent folder.  
Number of saved msgs. — Enter the number of sent  
messages to save. When the limit is reached, the oldest  
message is deleted.  
61  
       
Nokia Office Tools  
Nokia Office Tools support mobile business and enable  
effective communication with work teams.  
use the scroll key to select the text. Then select Options >  
Text.  
To send the note using a text message, multimedia  
message, e-mail, Bluetooth, or infrared, select Options >  
Send.  
To link a note to a contact, select Options > Link note to  
call > Add contacts. You can see the note on the display  
of your device when making a call to or receiving a call  
from the contact.  
Active notes  
Select Menu > Office > Active notes.  
Active notes allows you to create, edit, and view different  
kinds of notes, for example, meeting memos, hobby notes,  
or shopping lists. You can insert images, videos, and sound  
in the notes. You can link notes to other applications, such  
as Contacts, and send notes to others.  
Settings for Active notes  
Select Settings.  
Create and edit notes  
To create a note, start writing.  
To save notes to your device memory, select Memory in  
use > Phone memory. To save them to a memory card,  
select Memory in use > Memory card.  
To edit a note, scroll to it, and press the scroll key.  
To change the layout of active notes, select Change  
view > Grid. To view the notes as a list, select Change  
view > List.  
To insert images, sound clips, video, business cards, web  
bookmarks, and files, select Options > Insert object.  
To add new items to the note, select Options > Insert  
new. You can record sound and video clips, and capture  
images.  
To see a note in the background when making or receiving  
phone calls, select Show note during call > Yes.  
Tip: If you temporarily do not want to see the notes  
during phone calls, select Show note during call >  
No. This way you do not have to remove the links  
between notes and contact cards.  
To add boldface, italics, or underlining to your text or  
change the font colour, press and hold the shift key and  
62  
           
Search  
Calculator  
Select Menu > Office > Search.  
Select Menu > Office > Calculator.  
With Search, you can search for information in your  
contacts, notes, calendar appointments, to-do notes, e-  
mail messages, multimedia messages, and text messages.  
You can also search for files by the file names in your device  
memory and memory card.  
Note: This calculator has limited accuracy and is  
designed for simple calculations.  
To make a calculation, enter the first number of the  
calculation. Select a function such as add or subtract from  
the function map. Enter the second number of the  
calculation, and select =. The calculator performs  
operations in the order they are entered. The result of the  
calculation remains in the editor field and can be used as  
the first number of a new calculation.  
Search for information  
1. Select the content types you want to search in. To  
remove the selection, select it again. To include all  
content types in your search, select Select all.  
The device saves the result of the last calculation in its  
memory. Exiting the Calculatorapplication or switchingoff  
the device does not clear the memory. To recall the last  
saved result the next time you open the Calculator  
application, select Options > Last result.  
2. Enter your search keywords or some part of the  
keywords.  
3. Select Search.  
Tip: Wildcards may help you find items. In your  
search keyword, use ? to substitute a single  
character, and * to substitute zero or more  
characters. If you use a wildcard, add * to the  
beginning and end of the search keyword.  
To save the numbers or results of a calculation, select  
Options > Memory > Save.  
To retrieve the results of a calculation from the memory  
and use them in a calculation, select Options >  
Memory > Recall.  
To view the search results from your previous search,  
select Options > Previous results.  
File manager  
Search results  
With File manager, you can manage the contents and  
properties of files and folders on your device memory and  
memory card. You can open, create, move, copy, rename,  
send, and search for files and folders. Copyright protection  
To open the content, select the desired search result. You  
may then use the content, for example, to answer e-mail  
messages or edit documents.  
63  
To conduct a new search, select Options > New search. may prevent sending some files.  
               
Open the device tab or the memory card tab.  
To create a new file, select Options > New file >  
Quickword or Quicksheet.  
To select multiple files, scroll to each file, and select  
Options > Mark/Unmark > Mark.  
To send the selected files, select Options > Send.  
To move or copy files or folders to another folder, select  
Options > Move to folder or Copy to folder. Default  
folders such as Sound clips in Gallery cannot be moved.  
To search for files, select Options > Find. Enter the search  
text, and press the scroll key. The folders and files whose  
names contain the search text are displayed.  
To sort files according to the type, select Options > Sort  
by.  
To view the details of a file, select Options > Details. The  
details include the name, size and location of the file, and  
the time and date when the file was last modified.  
To send files to a compatible device, select Options >  
Send and the sending method.  
To view information about the selected file, select  
Options > Details. To view additional information about  
the file online, select Options > Additional details.  
Nokia Team suite  
Select Menu > Office > Teams.  
With Nokia Team Suite, you can create, edit, and delete  
teams, and send messages, view teams' web pages and  
communication history, and make phone calls to teams.  
Quickoffice  
Select Menu > Office > Quickoffice.  
Quickoffice consists of Quickword for Microsoft Word,  
Quicksheet for Microsoft Excel, Quickpoint for Microsoft  
PowerPoint, and Quickmanager for purchasing software.  
You can view Microsoft Office 2000, XP, and 2003  
documents (*.doc, *.xls, and *.ppt) with Quickoffice. If you  
have the editor version of Quickoffice, you can also edit  
files.  
Work with teams  
To create a new team, select Options > Team > Create  
new. Give a name for the team and enter the conference  
call service information, if needed. Then select the  
members for the team.  
All file formats or features are not supported.  
Work with files  
To open a file, scroll to the corresponding tab, select the  
file, and press the scroll key.  
64  
           
To select an action, first select the team to which you want  
to apply the action, then scroll  
to the action bar, and select the  
desired action. If you do not  
want to apply the action to all  
team members, open the team,  
and select the desired  
Push to talk — Communicate through push to talk  
(network service) with the team or selected team  
members.  
Team Web bookmarks — Open the bookmark folder  
that contains the team web pages.  
members. Then select the  
Edit teams  
action.  
To add team members, select Options > Members >  
To find more actions than are  
shown on the action bar, select  
Options > Actions.  
Add.  
To remove team members, select Options > Members >  
Remove.  
The following actions are  
To edit the details of a member, select Options >  
available:  
Members > Edit.  
Call — Make a phone call to the team or selected team  
members. The team members are called one by one and  
put on hold until the calls can be merged into a  
conference call (network service). The maximum  
number of participants depends on the network  
service.  
To see to which teams a member belongs, select  
Options > Members > Belongs to teams.  
Nokia Team Suite settings  
Create message — Send a text message, a multimedia  
message, or an e-mail to the team or selected team  
members.  
To select whether to see the team members' pictures on  
the display, select Options > Settings > View contact  
image.  
Call conference service — Start a call to the  
conference call service (network service) defined for the  
selected team.  
To define the plug-in settings, select Options >  
Settings > Plug-in settings. This setting is available only  
if there are plug-ins to configure.  
Communication log — View the communication log  
for the team or selected team members.  
Active notes — Write and read notes related to the  
team.  
Action bar settings  
Select Options > Settings > Action bar icons.  
Team search — Search for content related to the team  
or selected team members.  
To show action buttons in the action bar, select the desired  
65  
actions. To hide actions, remove the selection.  
           
To change the order of the action buttons, select an action,  
and Options > Move up, Move down, Move to top, or  
Move to bottom.  
Set base currency and  
exchange rate  
Tip: If you select not to show all actions in the action  
bar, you can still access the actions by selecting  
Options > Actions.  
Note: When you change base currency, you must  
enter new exchange rates because all previously set  
exchange rates are cleared.  
Before you can make currency conversions, you must  
choose a base currency and add exchange rates. The rate  
of the base currency is always 1. The base currency  
determines the conversion rates of the other currencies.  
Converter  
Select Menu > Office > Converter.  
The converter has limited accuracy, and rounding errors  
may occur.  
1. To set the rate of exchange for the unit of currency,  
scroll to the Type field, and select Options > Currency  
rates.  
2. Scroll to the currency type and enter the exchange rate  
Convert measurements  
you would like to set per single unit of currency.  
1. Scroll to the Type field, and select Options >  
Conversion type to open a list of measures. Select the  
measure to use, and select OK.  
3. To change the base currency, scroll to the currency, and  
select Options > Set as base currency.  
4. Select Done > Yes to save the changes.  
2. Scroll to the first Unit field, and select Options >  
Select unit. Select the unit from which to convert, and  
select OK. Scroll to the next Unit field, and select the  
unit to which to convert.  
After you have inserted all the necessary exchange rates,  
you can make currency conversions.  
3. Scroll to the first Amount field, and enter the value to  
convert. The other Amount field changes  
Zip manager  
automatically to show the converted value.  
Select Menu > Office > Zip.  
With Zip manager, you can create new archive files to store  
compressed ZIP formatted files; add single or multiple  
compressed files or directories to an archive; set, clear, or  
change the archive password for protected archives; and  
change settings, such as compression level, and file name  
encoding.  
66  
             
You can store the archive files on the device memory or on use, the number of copies and the range of pages you want  
a memory card.  
to print.  
To change the page layout before printing, select  
Options > Printing options > Page setup. You can  
change the paper size and orientation, define the margins,  
and insert a header or a footer. The maximum length of  
the header and footer is 128 characters.  
PDF reader  
Select Menu > Office > Adobe Reader.  
With PDF reader you can read PDF documents on the  
display of your device; search for text in the documents;  
modify settings, such as zoom level and page views; and  
send PDF files using e-mail.  
To preview a file or message before you print, select  
Options > Printing options > Preview.  
Printing options  
Open a file or message, and select Options > Printing  
Printing  
options.  
You can print a message or file from the device, preview a  
print job, define page layout options, select a printer, or  
print to a file. You may not be able to print all messages,  
such as multimedia messages or other special messages.  
Define the following options:  
Printer — Select an available printer from the list.  
Print — Select All pages, Even pages, or Odd pages  
as the print range.  
Print range — Select All pages in range, Current  
page, or Defined pages as the page range.  
Number of copies — Select the number of copies to  
print.  
Print files  
To configure a printer for your device, select Menu >  
Office > Printers > Options > Add. To set the printer  
as the default printer, select Options > Set as default.  
Print to file — Select to print to a file and determine  
the location for the file.  
Before you print, make sure your device is properly  
connected to the printer.  
Printer settings  
To print a message or a file, select Options > Print.  
Select Menu > Office > Printers.  
To add a new printer, select Options > Add.  
Define the following:  
To print to a file, select Options > Printing options >  
Print to file, and determine the location for the file.  
To change the printing options, select Options >  
67  
Printing options. You can select the printer you want to  
Printer — Enter a name for the printer.  
               
Driver — Select a driver for the printer.  
Bearer — Select a bearer for the printer.  
Access point — Select the access point.  
Port — Select the port.  
To change the alarm time, select Options > Reset  
alarm.  
To remove the alarm, select Options > Remove alarm.  
Host — Define the host.  
User — Enter the user.  
World clock  
Queue — Enter the print queue.  
Orientation — Select the orientation.  
Paper size — Select the paper size.  
Open the world clock tab to check the time in different  
cities.  
To add a city to the world clock view, select Options >  
Add city.  
Clock  
To change the city that determines the time and date in  
your device, select Options > Set as current city. The city  
is displayed in the Clock main view, and the time in your  
device is changed according to the city selected. Check that  
the time is correct and matches your time zone.  
Select Menu > Office > Clock.  
In Clock, you can view your local time and time zone  
information, set and edit alarms, or modify date and time  
settings.  
Clock settings  
Alarm clock  
Select Options > Settings.  
Open the alarm clock tab.  
To change the time or date, select Time or Date.  
To set an alarm, select Options > Set alarm. When an  
To change the clock shown in the standby modes, select  
alarm is active,  
is displayed.  
Clock type > Analogue or Digital.  
To switch off the alarm, select Stop, or to stop the alarm  
for 5 minutes, select Snooze. If the alarm time is reached  
while the device is switched off, the device switches itself  
on and starts sounding the alarm tone. If you select  
Stop, the device asks whether you want to activate the  
device for calls. Select No to switch off the device or Yes  
to make and receive calls. Do not select Yes when wireless  
phone use may cause interference or danger.  
To allow the mobile phone network to update the time,  
date, and time zone information to your device (network  
service), select Network operator time > Auto-  
update.  
To change the alarm tone, select Clock alarm tone.  
68  
             
2. Switch on the keyboard.  
Notes  
3. Select Menu > Office > Wlss. keybd..  
Select Menu > Office > Notes.  
4. To start searching for devices with Bluetooth  
connectivity, select Options > Find keyboard.  
You can create and send notes to other compatible  
devices, and save received plain text files (.txt format) to  
Notes.  
5. Select the keyboard from the list, and press the scroll  
key to start the connection.  
6. To pair the keyboard with your device, enter a  
passcode of your choice (1 to 9 digits) on the device  
and the same passcode on your keyboard.  
Write and send notes  
To write a note, start entering the text. The note editor  
opens automatically.  
7. If you are asked for a keyboard layout, select it from a  
list on your device.  
To open a note, scroll to it, and press the scroll key.  
When the name of the keyboard appears, its status  
changes to Keyboard connected, and the indicator of  
your keyboard blinks slowly; the keyboard is ready for use.  
To send a note to other compatible devices, select  
Options > Send.  
For details on the operation and maintenance of your  
To synchronise or to define synchronisation settings for a  
note, select Options > Synchronisation. Select Start to  
initialise synchronisation or Settings to define the  
synchronisation settings for the note.  
keyboard, see its user guide.  
Nokia Wireless  
Keyboard  
To set up the Nokia Wireless Keyboard or other compatible  
wireless keyboard supporting the Bluetooth Human  
Interface Devices (HID) profile for use with your device, use  
the Wireless keyboard application.  
1. Activate Bluetooth connectivity on your device: select  
Menu > Connectivity > Bluetooth > Bluetooth >  
On. Make sure that you have set My phone's  
visibility > Shown to all.  
69  
         
Free time  
Your device contains a variety of media applications for  
both business and leisure time usage.  
If the light is dim, select Options > Night mode before  
capturing an image.  
To adjust the image, select Options > Adjust > White  
balance or Colour tone.  
Camera  
To capture images in a sequence, select Options >  
Sequence mode. The camera captures six images in a  
row.  
This section describes the camera in your E51-1 (RM-244)  
device.  
To capture timed images, select Options > Self-timer,  
select the desired time-out, and press Activate. The  
camera captures an image after the time-out has passed.  
Select Menu > Media > Camera.  
Capture an image  
Tip: To access the various camera modes quickly,  
select Options > Show toolbar.  
Your device supports an image capture resolution of up to  
1600x1200 pixels. The image resolution in this guide may  
appear different.  
To view the captured images, select Menu > Media >  
Gallery > Images.  
To capture an image, use the display as a viewfinder, aim  
at your subject, and press the scroll key. The device saves  
the image in the default folder, or in the folder you have  
defined.  
Record a video clip  
1. Scroll to the video tab to activate the video recorder.  
Tip: To zoom in or out before taking a picture, scroll  
2. To start recording a video clip, press the scroll key. The  
remaining recording time is shown on the top of the  
display.  
up or down.  
If you do not want to keep the captured image, select  
Options > Delete. Select Back to return to the viewfinder  
to capture another image. Select Options > Go to  
Gallery to view the image in Gallery.  
3. To pause the recording, select Pause; to resume the  
recording, select Continue.  
70  
           
4. To stop the recording, select Stop. The device saves the  
clip in the default folder, or in the folder you have  
defined.  
Work with media files and  
folders  
5. If you do not want to keep the saved video clip, select  
Options > Delete. Select Back to return to the  
viewfinder to record another video clip. Select  
Options > Play to view the video clip in the RealPlayer  
application.  
To open a file or a folder, scroll to it, and press the scroll  
key.  
To create a new folder, select a file and then select  
Options > Organise > New folder. You cannot create  
folders within folders.  
To copy or move files, select a file and Options >  
Organise > Move to folder, New folder, Move to  
memory card, Copy to memory card, Copy to phone  
mem., or Move to phone mem..  
To download files into Gallery using the browser, select  
Downl. graphics, Downld. videos, Downld. tracks, or  
Downld. sounds. The browser opens, and you can choose  
a bookmark or enter the address for the download site.  
Camera settings  
Select Options > Settings.  
To adjust image quality, to select whether images remain  
on the display after capturing them, and to change  
resolution, default name, or memory in which to save your  
new images, select Image.  
To change the length, resolution, and default name of the  
videos you record or the memory in which to save them,  
select Video.  
To search for a file, select Options > Find. Write the item  
you are searching for. Files that match the search are  
shown.  
Gallery  
View images  
Select Menu > Media > Gallery.  
To open an image for viewing, select Options > Open.  
Use Gallery to access and use different types of media,  
including images, videos, music, and sounds. All viewed  
images and videos, and all received music and sounds are  
automatically saved to Gallery. Sound clips are opened in  
the Music player, and video clips and streaming links in the  
RealPlayer application. Images are opened in the image  
viewer.  
To open thenextor previousimage forviewing, scrollright  
or left.  
To enlarge the image on the display, select Options >  
Zoom in. To reduce the image on the display, select Zoom  
out.  
To view the image in full screen size, select Options >  
Full screen. To return to normal view, select Options >  
Normal screen.  
71  
             
To rotate the image, select Options > Rotate. Select  
Right to rotate the image clockwise by 90 degrees, or  
select Left to rotate the image counterclockwise by 90  
degrees.  
Play video clips and stream  
links  
Warning: Do not hold the device near your ear  
when the loudspeaker is in use, because the volume may  
be extremely loud.  
Manage image files  
To view detailed information about the image, select  
To play a video clip or audio file, select Options > Open >  
Most recent clips to play one of the six clips you most  
recently played, or Saved clip to play a clip or open a web  
link. Select Play.  
Options > View details.  
To send the image, select Options > Send, and the  
method for sending.  
To rename the image, select Options > Rename.  
To play streaming media, select a web link that points to  
a clip, and select Play; or connect to the web, browse to a  
video clip or audio file, and select Play. RealPlayer  
recognises two kinds of links: an rtsp:// URL and an http://  
URL that points to a RAM file. Before the content begins  
streaming, your device must connect to a web site and  
buffer the content. If a network connection problem  
causes a playback error, RealPlayer attempts  
To set the image as the display background, select  
Options > Use image > Set as wallpaper.  
To add the image to a contact, select Options > Use  
image > Assign to contact. The Contacts application  
opens, and you can select the contact for the image.  
automatically to reconnect to the internet access point.  
RealPlayer  
To adjust the volume during playback, use the volume  
keys.  
Select Menu > Media > RealPlayer.  
To fast-forward during playback, scroll up and hold. To  
rewind during play, scroll down and hold.  
RealPlayer plays video clips and audio files that are stored  
in the device memory or on a memory card, transferred to  
your device from an e-mail message or a compatible  
computer, or streamed to your device over the web.  
Supported formats include MPEG-4, MP4 (not streaming),  
3GP, RV, RA, AMR, and Midi. RealPlayer does not necessarily  
support all variations of a media file format.  
To stop the playback or streaming, select Stop. Buffering  
or connecting to the streaming site stops, the playback of  
the clip stops, and the clip rewinds to the beginning.  
To download video clips from the web, select Options >  
Download videos.  
To view the video clip in full-screen size, select Options >  
72  
Play in full screen. Full screen increases the size of the  
         
video to cover the maximum video area possible while the To define the settings manually, select Options >  
aspect ratio is maintained.  
Settings > Video or Streaming.  
Tip: To switch between the normal screen and full  
screen quickly, press 2 on the keypad.  
Music player  
Select Menu > Media > Music player.  
Send audio files and video  
clips  
With Music player, you can play music files, and create and  
listen to track lists. Music player supports files with  
extensions such as MP3 and AAC.  
To transfer a media clip to a compatible device, select  
Options > Send. Select the sending method.  
To send a media clip inside a message, create a multimedia  
message, select aclip to attachandInsert object > Video  
clip or Sound clip.  
Listen to music  
Warning: Listen to music at a moderate level.  
Continuous exposure to high volume may damage your  
hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be  
extremely loud.  
View information about a  
media clip  
To view the properties of a video clip, audio file, or web  
link, select Options > Clip details. Information may  
include for example the bit rate or the internet link of a  
streaming file.  
To select a music track, select Options > Music library.  
All tracks lists all music on your device. To view sorted  
songs, select Albums, Artists, Genres, or Composers.  
To play the track, select Options > Play. To pause the  
To set on file protection for a media clip, select Options >  
Clip details > Status > Options > Change. File  
protection prevents others from changing a file.  
playing, scroll to and press the scroll key.  
To fast-forward or rewind the track, scroll up or down and  
hold.  
To select the previous or next track, scroll up or down.  
RealPlayer settings  
To control the music volume, scroll right or left. To mute  
You may receive RealPlayer settings in a message from  
your service provider.  
the volume, scroll left until the volume is muted.  
To stop a track, scroll to  
and press the scroll key.  
73  
                 
To play the music tracks repeatedly, select Options >  
Loop. Select All to repeat all the tracks in the current  
folder, One to repeat the selected track, or Off to set off  
the repeating.  
To add all music tracks from a specific subcategory to a  
new, saved, or the currently playing track list, select  
Options > Add to track list.  
To delete all tracks from a category or subcategory, select  
To play music in random order, select a folder and  
Options > Delete.  
Options > Random play.  
After you have added or removed music files in the device,  
update your music library. Select Options > Update  
Music library. Music player searches the device memory  
for music files and updates them to the music library.  
Preset frequency settings  
Select Options > Equaliser.  
To use a preset frequency setting when playing music,  
To view music track information, select Options > View select the frequency setting you want to use, and select  
details.  
Options > Activate.  
To modify the frequency of a preset setting, select  
Options > Edit, select a frequency band, and scroll up or  
down to increase or decrease its value. You hear your  
Track lists  
You can create a new track list and add tracks to it, or edit frequency adjustment immediately in the playback.  
a saved track list.  
To reset the frequency bands to their original values, select  
To create a new track list, select Options > Music  
Options > Reset to defaults.  
library > Track lists > Options > New track list.  
To create your own frequency setting, select Options >  
To add a track to a track list, open the track list, and select New preset. Enter a name for the frequency setting. Scroll  
Options > Add tracks.  
up or down to move between the frequency bands and set  
the frequency on each band.  
Music categories  
Recorder  
To view music categories, select Music library > Artists,  
Albums, Genres, or Composers.  
Select Menu > Media > Recorder.  
To play all music tracks from a subcategory, scroll to a  
With Recorder, you can record up to 60 minutes of a voice  
memo, save the voice recording as a sound clip, and play  
the sound clip. Recorder supports the AMR file format.  
subcategory, and select Options > Play.  
To view all tracks that belong to a subcategory, scroll to  
the subcategory, and press the scroll key.  
74  
             
You can also press the voice key to open the Recorder  
application. If you have logged in to push to talk, the voice  
key works as a push-to-talk key and does not open  
Recorder.  
Tip: Waveform files (.wav) are a more common  
audio file format, but adaptive multirate files (.amr)  
are smaller for comparable sound quality.  
Instant messaging  
Record a sound clip  
Select Menu > Connectivity > IM.  
To record a sound clip, select Options > Record sound  
clip. Select Pause to pause the recording, and Record to  
resume recording. When you finish recording, select  
Stop. The sound clip is automatically saved to the Sound  
clips folder in Gallery.  
Instant messaging (IM) (network service) allows you to  
converse with other people using instant messages and  
join discussion forums (IM groups) with specific topics.  
Various service providers maintain IM servers that you can  
log in to after you register to an IM service. Service  
providers may differ in their support of features.  
Play a recording  
If IM is not available from your service provider, it may not  
appear in the menu of your device. Contact your service  
provider for more information about signing up for IM  
services and costs of services. For more information on IM  
settings, contact your service provider.  
To listen to the sound clip that you just recorded, select  
Play. The progress bar displays the playing time, position,  
and length of the clip. Select Stop to cancel the playback.  
To pause the playback of a recorded clip, select Pause.  
You may receive the settings in a special text message  
from the service provider that offers the IM service. If not,  
enter the settings manually.  
Playback resumes when you select Play.  
Recorder settings  
Recordings are automatically saved to the device memory  
unless you change the default location. Recordings that  
you create or receive after you change the settings are  
affected.  
Define IM settings  
To define the IM application settings, select Options >  
Settings > IM settings. You can, for example, set your  
screen name and IM alert tones.  
To change the default location of saved recordings, select  
To converse with an IM user or users, and to view and edit  
your IM contacts, you must log into an instant messaging  
server. To add an IM server, select Options > Settings >  
Server settings > Servers. Ask your service provider for  
the correct settings. To set the server as the one to which  
Options > Settings > Memory in use.  
To define the recording quality, select Options >  
Recording quality.  
75  
                 
your device automatically logs in, select Options >  
However, you cannot have two active conversations with  
the same contact.  
Settings > Server settings > Default server.  
To define how your device connects to the IM server, select To insert an image to an instant message, select  
Options > Settings > Server settings > IM login  
Options > Send image, and select the image you want  
type. To establish a connection between your device and to send.  
the default server automatically, select Automatic. To  
To save a conversation participant to your IM contacts,  
automate the connection only when in your home  
network, select Auto in home netw. To connect to the  
server when you open the IM application, select On app.  
start-up. To connect to the server manually, select  
Manual and log into the server in the IM main view by  
selecting Options > Log in. Enter your user ID and  
password at the prompt. You can obtain the user name,  
password, and other settings to log in from your service  
provider when you register for the service.  
select Options > Add to IM contacts.  
To save a conversation, while in the conversation view,  
select Options > Record chat. The conversation is saved  
as a text file that can be opened and viewed in the Notes  
application.  
IM groups  
Open IM groups. IM groups is available only if you are  
logged into an IM server, and the server supports IM  
groups.  
Start a conversation  
Open Conversations.  
To create an IM group, select Options > Create new  
group.  
To search for IM users and user IDs, select IM contacts >  
Options > New IM contact > Search. You can search by  
User's name, User ID, Phone number, and E-mail  
address.  
To join an IM group or to continue a group conversation,  
scroll to the group, and press the scroll key. Enter a  
message, and select Options > Send.  
To view a conversation, select a participant.  
To join an IM group that is not on the list, but for which  
you know the group ID, select Options > Join new  
group.  
To continue the conversation, enter your message, and  
select Options > Send.  
To leave the IM group, select Options > Leave IM  
To return to the conversations list without closing the  
conversation, select Back. To close the conversation,  
select Options > End conversation.  
group.  
To search for IM groups and group IDs, select IM  
groups > Options > Search. You can search by Group  
name, Topic, and Members (user ID).  
To start a new conversation, select Options > New  
76 conversation. You can start a new conversation with a  
contact while you are inside an active conversation.  
       
To add an IM user to the group, select Options > Add  
member. Select a user from your IM contacts or enter the  
contact ID.  
IM application settings  
Select Options > Settings > IM settings and define the  
following settings:  
To remove a member from the IM group, select Options >  
Use screen name — To change the name that  
Remove.  
identifies you in IM groups, select Yes.  
To provide members with editing rights to the group,  
select Options > Add editor. Select a user from your IM  
contacts or enter the ID of the user. IM users with editing  
rights can edit group settings and invite other users to join  
the group or ban them from the group.  
Show my availability — Select whether you allow all  
other IM users or only your IM contacts to see when you  
are online. Select To no-one to hide your online status.  
Allow messages from — Select to receive instant  
messages from all other IM users, your IM contacts only,  
or not to receive messages at all.  
To remove editing rights from a group member, select  
Options > Remove.  
Allow invitations from — Select to receive invitations  
to IM groups from all IM users, your IM contacts only, or  
not to receive invitations at all.  
To prevent IM users from joining the group, select  
Options > Add to banned list. Select a user from your  
IM contacts or enter the ID of the user.  
Msg. scrolling speed — To decrease or increase the  
speed at which new messages are displayed, scroll left  
or right.  
To allow a banned user to join the group, select Options >  
Remove.  
Sort IM contacts — Select to list your IM contacts  
alphabetically or by their online status.  
Availability reloading — To update the online status  
of your IM contacts automatically, select Automatic.  
Offline contacts — Select if IM contacts with an offline  
status are shown in the IM contacts list.  
Block users  
Select IM contacts > Options > Blocking options >  
View blocked list.  
Own message colour — Select the colour of the  
instant messages you send.  
To find a blocked IM user, enter the first letters of the user's  
name. Matching names appear in a list.  
Received msgcolour — Select the colour of the instant  
messages you receive.  
To allow receiving messages from a blocked IM user, select  
Options > Unblock.  
Show date/ time info — Select Yes to view the  
receiving or sending time of each message in an IM  
conversation.  
To prevent receiving messages from other IM users, select  
Options > Block new contacts. Select the IM user from  
your IM contacts, or enter the user ID.  
IM alert tone — Select the tone that is played when  
you receive a new instant message.  
77  
       
The FM radio depends on an antenna other than the  
wireless device antenna. Attach a compatible headset or  
enhancement to the device for the FM radio to function  
properly.  
Flash player  
Select Menu > Media > Flash Player.  
With Flash player, you can view, play, and interact with  
flash files made for mobile devices.  
Listen to the radio  
Manage flash files  
Warning: Listen to music at a moderate level.  
Continuous exposure to high volume may damage your  
hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be  
extremely loud.  
To optimise the use of Flash Player, insert a memory card  
in your device.  
To play a flash file, scroll to it, and press the scroll key.  
To send a flash file to compatible devices, select Options >  
Send. Copyright protection may prevent the sending of  
some flash files.  
To search for a station, select  
or  
. To set the  
frequency manually, select Options > Manual tuning.  
To view available stations based on location, select  
To switch between flash files saved on your device  
Options > Station directory (network service).  
memory or memory card, scroll to the corresponding tabs.  
To save the current station to your station list, select  
To change the flash file quality, select Options >  
Quality when you are playing the flash file. If you select  
High, the playback of some flash files may appear uneven  
and slow due to their original settings. Change the quality  
setting of such files to Normal or Low for improved  
playback.  
Options > Save station.  
To select a previously saved radio station, select  
or  
.
To adjust the volume, use the volume keys.  
To switch from headset use to listening to the radio  
To organise your flash files, select Options > Organise.  
through the loudspeaker, select Options > Activate  
loudspeaker.  
To return to the standby mode and leave the FM radio  
playing in the background, select Options > Play in  
background.  
Visual radio  
Select Menu > Media > Radio.  
The quality of the radio broadcast depends on the  
coverage of the radio station in that particular area.  
78  
           
Start-up tone — Select whether a tone is played when  
the application is started.  
View visual content  
To check availability and costs, and to subscribe to the  
service, contact your service provider.  
Auto-start service — Select Yes to have the Visual  
Radio service start automatically when you select a  
saved station that offers the Visual Radio service.  
Access point — Select the access point used for the  
data connection. You do not need an access point to use  
the application as an ordinary FM radio.  
Before you can view visual content, you must have an  
internet access point defined at Menu > Tools >  
Settings > Connection > Access points.  
1. To view available visual content for a tuned station,  
select Options > Start visual service. If the visual  
radio service ID has not been saved for the station,  
enter it, or select Retrieve to search for it in the station  
directory (network service).  
Current region — Select the region you are currently  
located in. This setting is displayed only if there was no  
network coverage when the application was started.  
2. Select the location nearest to you from the station  
directory. If your device finds a station that matches  
the tuned frequency, its visual service ID is displayed.  
To view the visual content, select OK.  
Push to talk  
Select Menu > Connectivity > PTT.  
Push to talk (PTT) (network service) provides direct voice  
communication connected with the push of a key. With  
PTT, you can use your device as a walkie-talkie.  
Saved stations  
You can use PTT to have a conversation with one person  
or with a group of people, or join a channel. A channel is  
like a chat room: you can call the channel to see if anyone  
is online. The channel call does not alert the other users;  
the users just join the channel and start speaking with  
each other.  
To open the list of your saved stations, select Options >  
Stations.  
To listen to a saved station, select Options > Station >  
Listen.  
To view available visual content for a station with the  
Visual Radio service, select Options > Station > Start  
visual service.  
In PTT communication, one person talks while the other  
users listen through the built-in loudspeaker. Users take  
turns responding to each other. Because only one user can  
talk at a time, the maximum duration of a speech turn is  
limited. For details of the speech turn duration for your  
network, contact your service provider.  
To change the station details, select Options > Station >  
Edit.  
Visual Radio settings  
79  
Select Options > Settings and from the following:  
             
hands. Press and hold the voice key the entire time you are  
talking. When you have finished talking, release the key.  
PTT settings  
Select Options > Settings and select User settings to  
define your preferences for PTT, or Connection settings  
to change the connection details. Contact your service  
provider for the correct settings.  
To end the PTT call, press the end key.  
When you receive a PTT call, press the call key to answer  
the call or the end key to dismiss the call.  
Tip: You may also receive the settings in a message  
from the provider of the PTT service.  
Created PTT calls  
Select Options > PTT log > Created calls, and a call.  
Log in to PTT service  
To make a PTT call to a contact, select Options > Talk 1  
If you have set Application start-up on in User  
settings, PTT automatically logs in to the service when  
started. If not, you must log in manually.  
to 1.  
To send a request to a contact to call you, select Options >  
Send callback request.  
To log in to the PTT service manually, select Options >  
To create a contact, select Options > Add to Contacts.  
Switch PTT on.  
When the Ringing type setting of your device is set to  
Beep once or Silent, or there is an ongoing phone call,  
you cannot make or receive PTT calls.  
Manage PTT contacts  
To view, add, modify, delete, or call contacts, select  
Options > PTT contacts. A list of names from the  
Contacts application is displayed with information about  
their login status.  
Make a PTT call  
To call a selected contact, select Options > Talk 1 to 1.  
Warning: Do not hold the device near your ear  
when the loudspeaker is in use, because the volume may  
be extremely loud.  
To make a group call, select several contacts and  
Options > Make PTT group call.  
To make a PTT call, select Options > PTT contacts, select  
one or several contacts from the list, and press the voice  
key. Remember to hold the device in front of you during  
the call so you can see the display. The display informs you  
when it is your turn to speak. Speak towards the  
To send the contact a request to call you, select Options >  
Send callback request.  
To answer a callback request, select Show to open the  
callback request. To make a PTT call to the sender, press  
the voice key.  
80  
microphone, and do not cover the loudspeaker with your  
                   
satellites. To use GPS, you need a compatible GPS receiver.  
Use Bluetooth connectivity to connect to the GPS receiver.  
To start using a compatible GPS receiver with Bluetooth  
connectivity, select Connectivity > Bluetooth.  
Create a PTT channel  
To create a channel, select Options > New channel >  
Create new.  
A GPS terminal receives low-power radio signals from the  
satellites and measures the travel time of the signals. From  
the travel time, the GPS receiver can calculate its location  
to the accuracy of metres.  
To register the channel to the PTT service, select  
Options > Register.  
To join a channel, select the channel you want to talk to,  
and press the voice key.  
The coordinates in the GPS are expressed in degrees and  
decimal degrees format using the international WGS-84  
coordinate system.  
To invite a user to a channel, select Options > Send  
invitation.  
To view the currently active users of a channel, select  
The Global Positioning System (GPS) is operated by the  
government of the United States, which is solely  
responsible for its accuracy and maintenance. The  
accuracy of location data can be affected by adjustments  
to GPS satellites made by the United States government  
and is subject to change with the United States  
Department of Defense civil GPS policy and the Federal  
Radionavigation Plan. Accuracy can also be affected by  
poor satellite geometry. Availability and quality of GPS  
signals may be affected by your location, buildings,  
natural obstacles, and weather conditions. The GPS  
receiver should only be used outdoors to allow reception  
of GPS signals.  
Options > Active members.  
To view more information about a selected user, select  
Options > Contact details.  
When you log in to PTT, you are automatically connected  
to the channels that were active when the application was  
last closed.  
Exit PTT  
To exit PTT, select Options > Exit. Select Yes to log out  
and close the service. Select No if you want to keep the  
application active in the background.  
Any GPS should not be used for precise location  
measurement, and you should never rely solely on location  
data from the GPS receiver and cellular radio networks for  
positioning or navigation.  
About GPS and satellite  
signals  
To enable or disable different positioning methods, such  
as Bluetooth GPS, select Menu > Tools > Settings >  
General > Positioning > Positioning methods.  
The Global Positioning System (GPS) is a worldwide radio  
navigation system that includes 24 satellites and their  
ground stations that monitor the operation of the  
About satellite signals  
81  
         
If your device cannot find the satellite signal, consider the To use a specific positioning method to detect the location  
following:  
of your device, select Positioning methods.  
If you are indoors, go outdoors to receive a better  
To select a positioning server, select Positioning server.  
signal.  
If you are outdoors, move to a more open space.  
Nokia Maps  
If the weather conditions are bad, the signal strength  
may be affected.  
Select Menu > Tools > Maps.  
Establishing a GPS connection may take from a couple  
of seconds to several minutes.  
With Maps, you can see your current location on the map,  
browse maps for different cities and countries, search for  
addresses and different points of interest, plan routes  
from one location to another, and save locations as  
landmarks and send them to compatible devices.  
Satellite status  
To check how many satellites your device has found, and  
whether your device is receiving satellite signals, select  
Menu > Tools > GPS data > Position > Options >  
Satellite status. If your device has found satellites, a bar  
for each satellite is shown in the satellite info view. The  
longer the bar, the stronger the satellite signal. When your  
device has received enough data from the satellite signal  
to calculate the coordinates of your location, the bar turns  
black.  
You can also purchase extra services, such as guides and a  
turn-by-turn navigation service with voice guidance.  
When you use Maps for the first time, you may need to  
define an internet access point for downloading map  
information for your current location. To change the  
access point later, select Options > Settings >  
Network > Default access point.  
Initially your device must receive signals from at least four  
satellites to be able to calculate the coordinates of your  
location. When the initial calculation has been made, it  
may be possible to continue calculating the coordinates of  
your location with three satellites. However, the accuracy  
is generally better when more satellites are found.  
Download maps  
When you browse the map on the display, for example,  
move to another country, a new map is downloaded  
automatically. These downloaded maps are free of charge,  
but downloading may involve the transmission of large  
amounts of data through your service provider's network.  
For more information on data transmission charges,  
contact your service provider.  
Positioning settings  
Select Menu > Tools > Settings > General >  
You can view the amount of transferred data from the data  
Positioning.  
82  
counter (kB) shown on the display. The counter shows the  
         
amount of network traffic when you browse maps, create 1. To download maps or voice guidance files with Nokia  
routes, or search for locations online.  
Map Loader, connect your device to the PC with a  
compatible USB data cable.  
Almost all digital cartography is inaccurate and  
incomplete to some extent. Never rely solely on the  
cartography provided for use in this device.  
2. Open Nokia Map Loader in your PC. Nokia Map Loader  
checks the version of map data to be downloaded.  
3. Select the maps or voice guidance files you want to  
To prevent the device from automatically downloading  
maps through the internet, for example, when you are  
outside your home cellular network, select Options >  
Settings > Network > Use network > Off.  
To receive a note when your device registers to a network  
outside your home cellular network, select Options >  
Settings > Network > Roaming warning > On.  
Contact your network service provider for details and  
roaming costs.  
install to your device.  
Satellite information  
The indicator  
is shown on the display when you  
browse maps. When the device tries to establish a GPS  
connection, the circles are yellow and the icon is blinking.  
When the device receives enough data from the satellites  
to calculate the coordinates of your current location, the  
icon stops blinking and turns green.  
To adjust the size of the cache that is used for saving maps  
or voice guidance files, select Options > Settings >  
Network > Max. memory card use (%). This option is  
To check how many satellites your device found and  
available only when a compatible memory card is inserted. whether your device is receiving satellite signals from the  
When the memory is full, the oldest map data is deleted.  
satellites, select Options > Map options > Satellite  
The cache cannot be emptied.  
info.  
If your device found satellites, a bar is shown for each  
satellite in the satellite information view. The longer the  
bar, the stronger the satellite signal. When your device has  
received enough data from the satellite signal to calculate  
the coordinates of your location, the bar turns black.  
Nokia Map Loader  
Nokia Map Loader is PC software that you can use to  
download and install maps for different countries from the  
internet to your device or a compatible memory card. You  
can also use it to download voice files for turn-by-turn  
navigation.  
Initially your device must receive signals from at least four  
satellites to be able to calculate the coordinates of your  
location. When the initial calculation has been made, it  
may be possible to continue calculating the coordinates of  
your location with three satellites. However, the accuracy  
is generally better when more satellites are found.  
To use Nokia Map Loader, download it from  
www.nokia.com/maps, and install it to a compatible PC.  
You must use Nokia Maps before using Nokia Map Loader.  
Nokia Map Loader uses the Maps history information to  
check the version of map data to be downloaded.  
83  
 
To view saved landmarks, select Options > Find place >  
Browse maps  
Landmarks.  
The map coverage varies by country.  
To send a landmark to a compatible device, press the scroll  
key, and select Send. If you send the landmark in a text  
message, the information is converted to plain text.  
When you open the Maps application, Maps zooms in to  
the location that was saved from your last session. If no  
position was saved from the last session, the Maps  
application zooms in to the capital city of the country you  
are in based on the information the device receives from  
the cellular network. At the same time, the map of the  
location is downloaded, if it has not been downloaded  
during previous sessions.  
To establish a GPS connection and zoom in to your current  
location, select Options > Find place > GPS position  
[0]. Your current location is indicated on the map with  
.
To adjust the network, routing, and general settings,  
select Options > Settings.  
Find a place  
To view points of interest near your current location or  
other locations on the map, select Options > Find  
place > Nearby and a category.  
To search for a point of interest by name, select Options >  
Find place > Keyword search, or start entering the first  
letters of the name, and select Find.  
To move on the map, scroll up, down, left, or right.  
To zoom in or out, press * or #.  
To search for a location by address, select Options > Find  
place > By address. You must enter the city and country.  
To use an address you have saved to a contact card in  
Contacts, select Options > Find place > By address >  
Options > Select from contacts.  
To switch between the 2-D and 3-D views, select  
Options > Map options > 2D/3D.  
To find a location, select Options > Find place.  
To use a location on the map, for example, as a starting  
point for a nearby search, to plan a route, view its details,  
or start navigation (extra service), press the scroll key, and  
select the desired option.  
To view the search result on the map, press the scroll key,  
and select Show on map.  
To view a list of your previous locations, select Options >  
Find place > Recent.  
To define what kinds of points of interest are shown on  
the map, select Options > Map options > Categories.  
To take a screen shot of your location, select Save > As  
Plan a route  
image. The screen shot is saved in Gallery.  
1. Scroll to a point on the map, press the scroll key, and  
To save a location as a landmark, press the scroll key and  
select Route from.  
84  
select Save > As landmark.  
     
2. Scroll to Select, and select Options > Select. To adjust To discard the created route and use another route, select  
the routing settings, such as the mode of  
transportation, select Options > Settings >  
Routing.  
Options > Alternative route.  
To view only the next turns and hide the map, select  
Options > Map options > Next turns.  
To stop navigation, select Options > Stop navigation.  
3. To select the destination, scroll to To, and select  
Options > Select.  
4. To view the route itinerary, select Options > Show  
route. The route is calculated using the selected  
routing settings.  
Guides  
To purchase and download guides, select Options >  
Extra services > Guides. The guides provide information  
about attractions, restaurants, hotels, and other points of  
interest. The guides must be downloaded and purchased  
before use. The licence you purchase is device-specific and  
cannot be transferred from your device to another device.  
To view the itinerary route on the map, select Options >  
Show on map.  
To run a simulation of the route, select Options > Start  
simulation.  
To download a new guide to your device, scroll to the  
nearest guides or all guides tab, select the desired guide,  
and OK. The purchase process starts automatically. You  
can pay for the guides through a credit card or have the  
amount charged to your phone bill, if supported by your  
cellular network service provider.  
Navigation  
To purchase a navigation service with voice guidance to  
use in Maps, select Options > Extra services > Add  
navigation.  
The licence you purchase is device-specific and cannot be  
transferred from your device to another device. After  
purchasing the navigation upgrade, the service is  
available through Maps.  
To confirm the purchase, select OK twice. To receive a  
confirmation of the purchase through e-mail, enter your  
name and e-mail address, and select OK.  
When you use navigation for the first time, you are  
To browse a downloaded guide, scroll to the my guides  
prompted to select the language of the voice guidance and tab, select a guide and a subcategory, if available.  
download the voice guidance files of the selected  
language. To change the language later, select Options >  
Settings > General > Voice guidance.  
GPS data  
To navigate to a destination using voice guidance, create  
Select Menu > Tools > GPS data.  
a route in Maps, and select Options > Start navigation.  
You can also start navigation by selecting any location on  
the map or in a results list, and Navigate to.  
With GPS data, you can view your current location, find  
your way to a desired location, and track distance.  
85  
     
Select Navigation to view navigating information to your To change the measuring system in use, select Options >  
trip destination, Position to view positioning information Settings > Measurement system > Metric or  
about your current location, or Trip dist. to view your  
travelling information such as the distance and duration  
you have travelled, and your average and maximum  
speeds.  
Imperial.  
To enter the altitude calibration to correct the altitude  
received from the positioning satellites, select Options >  
Settings > Altitude calibration.  
The application must receive positioning information  
from at least three satellites to be used as a travelling aid.  
The trip meter has limited accuracy, and rounding errors  
may occur. Accuracy can also be affected by availability  
and quality of GPS signals.  
Landmarks  
Select Menu > Tools > Landmarks.  
Landmarks are coordinates to geographic locations that  
you can save to your device for later use in different  
location-based services. You can create landmarks using a  
Bluetooth GPS accessory or network (network service).  
Use GPS data  
To check the signal strength of the satellites that provide  
the positioning information necessary for navigation,  
open any of the three views and select Options >  
Satellite status.  
Create a landmark  
To create a landmark, select Options > New landmark.  
Select Current position to make a network request for the  
latitude and longitude coordinates of your current  
location, Use map to select the location from a map, or  
Enter manually to fill in necessary location information  
such as a name, category, address, latitude, longitude, and  
altitude.  
To set a landmark or location as the destination of your  
trip, select Navigation > Options > Set destination.  
You can also enter the destination latitude and longitude  
coordinates.  
To remove the destination set for your trip, select  
Navigation > Options > Stop navigation.  
To save your current position as a landmark, select  
To show the landmark on the map, select Options >  
Navigation or Position, and Options > Save position.  
Show on map.  
To activate the trip meter, select Trip dist. > Options >  
Start. To stop the trip meter, select Options > Stop.  
Edit landmarks  
To reset all fields and start calculating the trip again, select  
To edit a landmark, select Options > Edit > Options and  
Trip dist. > Options > Restart.  
86  
from the following:  
             
Select categories — Organise the landmark to a group  
of similar landmarks. Select a category to modify  
landmark information such as a name, category,  
address, latitude, longitude, and altitude.  
Retrieve current position — Request and  
automatically fill in the geographical latitude and  
longitude coordinates to make a landmark of your  
current location.  
Receive landmarks  
Select Menu > Messaging.  
Open a message that contains a landmark you have  
received from another device. Scroll to the landmark, and  
press the scroll key.  
To save the landmark in your device, select Options >  
Save.  
Delete — Remove the landmark.  
Landmark icon — Change the icon of the landmark.  
Show on map — Show the landmark on the map.  
Send — Send the landmark to compatible devices.  
Editing options — Edit the phone numbers and URL  
addresses assigned to the landmark.  
To forward the landmark to compatible devices, select  
Options > Send.  
To show the received landmark on the map, select  
Options > Show on map.  
To find out how to navigate to the received landmark,  
Writing language — Change the writing language.  
select Options > Show route.  
Landmark categories  
You can see the landmark categories in two views: one  
lists categories that already contain landmarks, and the  
other lists all the categories your device has.  
To view the landmarks that a category contains, scroll to  
the category, and press the scroll key.  
To create a new category, select Options > Edit  
categories > Options > New category.  
To move a landmark from one category to another, open  
the landmarks tab, select the landmark, and Options >  
Add to category. Select the old category to remove the  
mark next to it. Select the category or categories to which  
you want to add the landmark. Select Accept.  
87  
       
Connectivity  
Your device offers several options to connect to the  
internet, a corporate intranet, or to another device or  
computer.  
Nokia PC Suite  
You can install Nokia PC Suite from the CD-ROM or from the  
web. Nokia PC Suite can be used with Windows 2000,  
Windows XP, and Windows Vista. With Nokia PC Suite, you  
can make backups, synchronise your device with a  
compatible computer, move files between your device and  
a compatible computer, or use your device as a modem.  
Fast downloading  
High-speed downlink packet access (HSDPA, also called  
3.5G, indicated by  
) is a network service in UMTS  
For more information about Nokia PC Suite, see the Nokia  
networks and provides high-speed data downloads. When  
HSDPA support in the device is activated and the device is  
connected to a UMTS network that supports HSDPA,  
downloading data such as messages, e-mail, and browser  
pages through the cellular network may be faster. An  
active HSDPA connection is indicated by . The icon may  
vary between regions.  
PC Suite guide.  
Data cable  
Select Menu > Connectivity > USB.  
Using a USB data cable, you can connect your device to a  
compatible computer. Install Nokia PC Suite to your  
computer before you use a cable connection, as Nokia PC  
Suite automatically installs the USB data cable driver to  
your computer. You can use the Data transfer mode  
without installing the USB data cable drivers.  
You can activate or deactivate support for HSDPA in the  
device settings.  
For availability and subscription to data connection  
services, contact your service provider.  
HSDPA only affects the download speed; sending data to  
the network, such as messages and e-mail, is not affected.  
Connect the cable to the USB connector of the device.  
To change the USB mode you normally use with the data  
cable, select USB mode > PC Suite or Data transfer.  
88  
             
To set the device to ask for the mode each time you  
connect the USB data cable to the device, select Ask on  
connection > Yes.  
3. Switch on infrared on the other device and wait a few  
seconds until the infrared connection is established.  
4. Locate the desired file in an application or File  
manager, and select Options > Send > Via  
infrared.  
Transfer data from a computer  
1. Make sure that you have selected USB as a connection  
type in the Manage connections settings in Nokia PC  
Suite.  
If the data transfer is not started within 1 minute after the  
activation of the infrared port, the connection is cancelled  
and must be started again.  
2. Insert a memory card to your device and connect the  
device to a compatible computer with the USB data  
cable.  
All items received through infrared are placed in the Inbox  
folder in Messaging.  
Positioning the devices away from each other breaks the  
connection, but the infrared light beam remains active on  
your device until it deactivates.  
3. When the device asks which mode is used, select Data  
transfer. In this mode, you can see your device as a  
removable hard drive in your computer.  
4. End the connection from the computer (for example,  
from an Unplug or Eject Hardware wizard in Windows)  
to avoid damaging the memory card.  
Bluetooth  
Select Menu > Connectivity > Bluetooth.  
Infrared  
About Bluetooth  
Do not point the infrared (IR) beam at anyone's eye or  
allow it to interfere with other IR devices. This device is a Bluetooth technology enables wireless connections  
Class 1 laser product.  
between electronic devices within a range of 10 metres  
(33 feet). A Bluetooth connection can be used to send  
images, videos, text, business cards, calendar notes, or to  
connect wirelessly to devices that use Bluetooth  
technology.  
Use infrared to connect two devices and transfer data  
between them. With infrared, you can transfer data such  
as business cards, calendar notes, and media files with a  
compatible device.  
Since devices using Bluetooth technology communicate  
using radio waves, your device and the other devices do  
not need to be in direct line-of-sight. The two devices only  
need to be within a maximum of 10 metres of each other,  
although the connection can be subject to interference  
1. Ensure that the infrared ports of the devices face each  
other. The positioning of the devices is more important  
than the angle or distance.  
2. Select Menu > Connectivity > Infrared to switch on  
89  
infrared on your device.  
       
from obstructions such as walls or other electronic  
devices.  
a unique name to make it easy to recognise if there are  
several Bluetooth devices in the vicinity.  
Several Bluetooth connections can be active at a time. For 2. Select Bluetooth > On.  
example, if your device is connected to a headset, you can  
also transfer files to another compatible device at the  
same time.  
3. Select My phone's visibility > Shown to all or  
Define period. If you select Define period, you need  
to define the time during which your device is visible  
to others. Your device and the name you entered can  
now be seen by other users with devices using  
Bluetooth technology.  
This device is compliant with Bluetooth Specification 2.0  
supporting the following profiles: Dial-up Networking  
Profile, Object Push Profile, File Transfer Profile, Handsfree  
Profile, Headset Profile, Basic Imaging Profile, SIM Access  
Profile, Generic Object Exchange Profile, Generic Access  
Profile, Generic Audio/Video Distribution Profile, Advanced  
Audio Distribution Profile, and Audio/ Video Remote  
Control Profile. To ensure interoperability between other  
devices supporting Bluetooth technology, use Nokia  
approved enhancements for this model. Check with the  
manufacturers of other devices to determine their  
compatibility with this device.  
4. Open the application where the item you want to send  
is stored.  
5. Select the item, and select Options > Send > Via  
Bluetooth. The device searches for other devices using  
Bluetooth technology within range and lists them.  
Tip: If you have sent data using Bluetooth  
before, a list of the previous search results is  
displayed. To search for more Bluetooth devices,  
select More devices.  
Features using Bluetooth technology, or allowing such  
features to run in the background while using other  
features, increase the demand on battery power and  
reduce the battery life.  
6. Select the device with which you want to connect. If  
the other device requires pairing before data can be  
transmitted, you are asked to enter a passcode.  
There may be restrictions on using Bluetooth technology  
in some locations. Check with your local authorities or  
service provider.  
When the connection has been established, Sending  
data is shown.  
The Sent folder in the Messaging application does not  
store messages sent using Bluetooth connectivity.  
To receive data using Bluetooth, select Bluetooth > On  
and My phone's visibility > Shown to all to receive data  
from a non-paired device or Hidden to receive data from  
a paired device only. When you receive data through  
Bluetooth, a tone sounds, and you are asked if you want  
to accept the message in which the data is included. If you  
Send and receive data with  
Bluetooth  
1. When you activate Bluetooth for the first time, you are  
asked to give a name to your device. Give your device  
90  
   
accept, the message is placed in the Inbox folder in the  
Messaging application.  
3. Select Yes to make the connection between your  
device and the other device automatic, or No to  
confirm the connection manually every time a  
connection attempt is made. After pairing, the device  
is saved to the paired devices page.  
To give a nickname to the paired device, select Options >  
Assign short name. The nickname is only displayed in  
your device.  
To delete a pairing, select the device whose pairing you  
want to delete and Options > Delete. To delete all  
pairings, select Options > Delete all. If you are currently  
connected to a device and cancel the pairing with that  
device, pairing is removed immediately, and the  
connection is ended.  
Tip: You can access the files in the device or on the  
memory card using a compatible accessory that  
supports the File Transfer Profile Client service (for  
example, a laptop computer).  
A Bluetooth connection is disconnected automatically  
after sending or receiving data. Only Nokia PC Suite and  
some enhancements such as headsets may maintain a  
connection even if not actively used.  
Pair devices  
Open the paired devices tab.  
To allow a paired device to connect automatically to your  
device, select Set as authorised. Connections between  
your device and the other device can be made without  
your knowledge. No separate acceptance or authorisation  
is needed. Use this status for your own devices, such as  
your compatible headset or computer, or devices that  
belong to someone you trust. If you want to accept  
connection requests from the other device separately  
every time, select Set as unauthorised.  
To use a Bluetooth audio enhancement such as a  
Bluetooth handsfree or headset, you need to pair your  
device with the enhancement. See the enhancement user  
guide for the passcode and further instructions. To  
connect to the audio enhancement, switch on the  
enhancement. Some audio enhancements connect  
automatically to your device. Otherwise open the paired  
devices tab, scroll to the enhancement, and select  
Options > Connect to audio device.  
Before pairing, create your own passcode (1-16 digits),  
and agree with the user of the other device to use the same  
code. Devices that do not have a user interface have a fixed  
passcode. You need the passcode only when you connect  
the devices for the first time. After pairing, it is possible to  
authorise the connection. Pairing and authorising the  
connection makes connecting quicker and easier, as you  
do not have to accept the connection between paired  
devices every time you establish a connection.  
The passcode for remote SIM access must have 16 digits.  
1. Select Options > New paired device. The device  
starts to search for Bluetooth devices within range. If  
you have sent data using Bluetooth before, a list of the  
previous search results is displayed. To search for more  
Bluetooth devices, select More devices.  
2. Select the device with which you want to pair, and  
enter the passcode. The same passcode must be  
entered to the other device as well.  
91  
   
3. Use your car kit to start a search for compatible devices.  
For instructions, see the user guide of your car kit.  
Security tips  
When you are not using Bluetooth connectivity, select  
4. Select your device from the list of compatible devices.  
Bluetooth > Off or My phone's visibility > Hidden.  
5. To pair the devices, enter the Bluetooth passcode  
Do not pair with an unknown device.  
shown on the display of the car kit to your device.  
Tip: If you have already accessed the SIM card from  
the car kit with the active user profile, the car kit  
searches automatically for a device with the SIM  
card. If it finds your device, and automatic  
authorisation is activated, the car kit automatically  
connects to the GSM network when you switch on  
the car ignition.  
SIM access profile  
With the SIM access profile, you can access the SIM card of  
your device from a compatible car kit device. This way, you  
do not need a separate SIM card to access SIM card data  
and connect to the GSM network.  
When you activate the remote SIM access profile, you can  
use applications on your device that do not need network  
or SIM services.  
To use the SIM access profile, you need the following:  
Compatible car kit device that supports Bluetooth  
wireless technology  
To make connections between your device and the car kit  
without separate acceptance or authorisation, select  
Menu > Connectivity > Bluetooth, and open the paired  
devices tab. Scroll to the car kit, press the scroll key, and  
enter the Bluetooth passcode. When the device asks to  
make the connection automatic, select Yes. If you select  
No, connection requests from this car kit must be accepted  
separately every time.  
To end the remote SIM access connection from your device,  
select Menu > Connectivity > Bluetooth > Remote  
SIM mode > Off.  
Valid SIM card in your device  
When the wireless device is in the remote SIM mode, you  
can only use a compatible connected enhancement, such  
as a car kit, to make or receive calls. Your wireless device  
will not make any calls, except to the emergency numbers  
programmed into your device, while in this mode. To  
make calls from your device, you must first leave the  
remote SIM mode. If the device has been locked, enter the  
lock code to unlock it first.  
For more information about car kit devices and  
compatibility with your device, see the Nokia web site and  
your car kit user guide.  
Use the SIM access profile  
Wireless LAN  
1. Select Menu > Connectivity > Bluetooth >  
Some places, like France, have restrictions on the use of  
wireless LAN. Check with your local authorities for more  
information.  
Remote SIM mode > On.  
92  
2. Activate Bluetooth in the car kit.  
         
Your device can detect and connect to a wireless local area that belong to the same network, your device can stay  
network (WLAN). To use WLAN, a network must be  
available in the location and your device must be  
connected to it.  
connected to the network.  
Tip: To check the unique media access control (MAC)  
address that identifies your device, for example to  
configure the MAC address of your device to a WLAN  
router, enter *#62209526# on the device keypad.  
The MAC address is shown on the device display.  
WLAN connections  
Important: Always enable one of the available  
encryption methods to increase the security of your  
wireless LAN connection. Using encryption reduces the risk  
of unauthorized access to your data.  
See WLAN availability  
To have your device show WLAN availability, select  
Menu > Tools > Settings > Connection > Wireless  
LAN > Show WLAN availability.  
To use WLAN, you must create an internet access point in  
a WLAN. Use the access point for applications that need to  
connect to the internet. A WLAN connection is established  
when you create a data connection using a WLAN access  
point. The active WLAN connection is ended when you end  
the data connection. You can also end the connection  
manually. See "Connection manager", p. 97.  
If WLAN is available,  
is shown on the display.  
Tip: You can also scan for networks in range.  
WLAN wizard  
You can use WLAN during a voice call or when packet data  
is active. You can only be connected to one WLAN access  
point device at a time, but several applications can use the  
same internet access point.  
Select Menu > Connectivity > WLAN wiz..  
The WLAN wizard helps you find and connect to a wireless  
LAN. When you open the application, your device starts to  
scan for available WLANs and lists them.  
When the device is in the Offline profile, you can still use  
WLAN, if available. Remember to comply with any  
applicable safety requirements when establishing and  
using a WLAN connection.  
To update the list of available WLANs, select Options >  
Refresh.  
To start or continue browsing the web using the access  
point of the WLAN, scroll to the desired network, and select  
Options > Start Web browsing or Cont. Web  
browsing.  
If you move the device to another location within the  
WLAN and out of range of a WLAN access point, the  
roaming functionality can automatically connect your  
device to another access point that belongs to the same  
WLAN. As long as you remain within range of access points  
To disconnect the active connection to the WLAN, select  
93  
Options > Disconnect WLAN.  
           
To view the details of the WLAN, select Options >  
To start a search for available WLANs, scroll to the row  
showing the status, press the  
scroll key, and select Search for  
WLAN. To set WLAN scanning  
off, scroll to the row showing  
the status, press the scroll key,  
and select Switch WLAN scan  
off.  
Details.  
To save the access point of the WLAN, select Options >  
Define access point.  
Always enable one of the available encryption methods to  
increase the security of your WLAN connection. Using  
encryption reduces the risk of unauthorised access to your  
data.  
When Start Web browsing is  
selected, the WLAN wizard  
automatically creates an access  
point for the selected WLAN.  
The access point can also be  
used with other applications  
requiring WLAN connection.  
Use the wizard in the active standby mode  
In the active standby mode, the WLAN wizard shows the  
status of your WLAN connections and network searches.  
To view the available options, scroll to the row showing  
the status, and press the scroll key. Depending on the  
status, you can start the Web browser using a WLAN  
connection, disconnect from a WLAN, search for WLANs, or  
set the network scanning on or off.  
If you select a secured WLAN, you are asked to enter the  
relevant passcodes. To connect to a hidden network, you  
must enter the correct service set identifier (SSID).  
If WLAN scanning is off and you are not connected to any  
WLAN, WLAN scanning off is displayed in the active  
standby mode. To set scanning on and search for available  
WLANs, scroll to the row showing the status, and press the  
scroll key.  
Internet access points  
An internet access point is a collection of settings, which  
define how the device creates a data connection to the  
network. To use e-mail and multimedia services or to  
browse web pages, you must first define access points for  
these services.  
Some or all access points may be preset for your device by  
your service provider, and you may not be able to create,  
edit, or remove them.  
94  
 
4. After defining the settings, select Options >  
Advanced settings to define the advanced settings or  
Back to save the settings and exit.  
Set up an internet access point  
for packet data (GPRS)  
1. Select Menu > Tools > Settings > Connection >  
Access points.  
Advanced internet access  
point settings for packet data  
(GPRS)  
2. Select Options > New access point to create a new  
access point, or select an existing access point from the  
list and then Options > Duplicate access point to use  
the access point as a basis for the new one.  
Select Menu > Tools > Settings > Connection >  
3. Define the following settings.  
Access points.  
Connection name — Enter a descriptive name for  
After setting up a basic internet access point for packet  
data (GPRS), select Options > Advanced settings, and  
define the following advanced settings:  
the connection.  
Data bearer — Select Packet data.  
Accesspoint name — Enter the name for the access  
point. The name is usually provided by your service  
provider.  
Network type — Select IPv4 or IPv6 as the internet  
protocol type. The internet protocol defines how data  
is transferred to and from your device.  
User name — Enter your user name if required by  
the service provider. User names are often case-  
sensitive and provided by your service provider.  
Prompt password — Select Yes to enter your  
password each time you log into a server or No to  
save the password in your device memory and  
automate the login.  
Phone IP address — Enter the IP address of your  
device. Select Automatic to have the network provide  
the device IP address. This setting is shown only if you  
select Network type > IPv4.  
DNS address — Select Primary DNS address and  
Secondary DNS address and enter their IP addresses,  
if required by your service provider. Otherwise, the  
name server addresses are provided automatically.  
Proxy server address — Enter the address of the proxy  
server. Proxy servers are intermediate servers used by  
some service providersbetweena browsing service and  
its users. These servers may provide additional security  
and speed up access to the service.  
Password — Enter your password if required by the  
service provider. The password is often case-  
sensitive and provided by the service provider.  
Authentication — Select Secure to send your  
password always encrypted, or Normal to send  
your password encrypted when possible.  
Homepage — Enter the web address of the page  
you want to display as the home page when you use  
this access point.  
95  
       
WLAN security settings — Edit the security  
settings for the selected security mode.  
Homepage — Enter the web address of the page  
you want to display as the home page when you use  
this access point.  
Set up an access point for  
WLAN manually  
1. Select Menu > Tools > Settings > Connection >  
Access points.  
To set up a WLAN access point automatically, use the WLAN  
2. Select Options > New access point to create a new  
access point, or select an existing access point from the  
list and then Options > Duplicate access point to use  
the access point as a basis for the new one.  
wizard. Select Menu > Connectivity > WLAN wiz..  
Advanced access point  
settings for WLAN  
3. Define the following settings.  
Connection name — Enter a descriptive name for  
Select Menu > Tools > Settings > Connection >  
the connection.  
Access points.  
Data bearer — Select Wireless LAN.  
WLAN network name — To enter the service set  
identifier (SSID), that is, the name that identifies the  
specific WLAN, select Enter manually. To select the  
network from the WLANs in range, select Search for  
networks.  
After setting up a basic access point for WLAN, select  
Options > Advanced settings, and define the following  
advanced settings:  
IPv4 settings — Enter the device IP and name server  
addresses for the IPv4 internet protocol.  
IPv6 settings — Select or enter the name server  
addresses for the IPv6 internet protocol.  
Ad-hoc channel — The channel is usually chosen  
automatically. To enter the channel number (1-11)  
manually, select User defined.  
Network status — Select Hidden if the network  
you are connecting to is hidden or Public if it is not  
hidden.  
WLAN network mode — If you select  
Infrastructure, devices can communicate with  
each other and with wired LAN devices through a  
WLAN access point. If you select Ad-hoc, devices can  
send and receive data directly with each other, and  
no WLAN access point is needed.  
Proxy server address — Enter the proxy server  
address.  
Proxy port number — Enter the proxy server port  
number.  
WLAN security mode — You must select the same  
security mode that is used in the WLAN access point.  
If you select WEP (wired equivalent privacy), 802.1x,  
or WPA/WPA2 (Wi-Fi protected access), you must  
also configure the relevant additional settings. See  
the device help for more information.  
Modem  
96  
Select Menu > Connectivity > Modem.  
           
Together with a compatible computer, you can use your  
device as a modem to connect to the web, for example.  
View and end active  
connections  
Before you can use your device as a modem  
You need an appropriate data communications  
software on your computer, such as Nokia PC Suite. For  
more information, see the Nokia PC Suite guide.  
To see the open data connections, select Active data  
connections.  
To view detailed information about network connections,  
select a connection from the list and Options > Details.  
The type of information shown depends on the connection  
type.  
You must subscribe to the appropriate network services  
from your service provider or internet service provider.  
You must have the appropriate drivers installed on your  
computer. You must install drivers for the cable  
connection, and you may need to install or update  
Bluetooth or infrared drivers.  
To end the selected network connection, select Options >  
Disconnect.  
To end all active network connections simultaneously,  
To connect the device to a compatible computer using  
infrared, press the scroll key. Make sure the infrared ports  
of the device and computer are directly facing each other  
with no obstacles between them.  
select Options > Disconnect all.  
Search for WLAN  
To connect your device to a computer using Bluetooth  
wireless technology, initiate the connection from the  
computer. To activate Bluetooth in your device, select  
Menu > Connectivity > Bluetooth and select  
Bluetooth > On.  
To search for WLANs available within range, select  
Available WLAN networks. The available WLANs are  
listed with their network mode (infrastructure or ad-hoc),  
signal strength, and network encryption indicators, and  
whether your device has an active connection with the  
network.  
If you use a cable to connect your device to a computer,  
initiate the connection from the computer.  
To view the details of a network, scroll to it, and press the  
You may not be able to use some of the other  
communication features when the device is used as a  
modem.  
scroll key.  
To create an internet access point for a network, select  
Options > Define access point.  
Connection manager  
Select Menu > Connectivity > Conn. mgr..  
97  
         
Security and data management  
Manage the data and software on your device, and take  
care of the security of the device and its contents.  
To change the lock code, select Menu > Tools >  
Settings > General > Security > Phone and SIM  
card > Lock code. Enter the old code and then the new  
code twice. The new code can be 4-255 characters long.  
Both alphabets and digits can be used, and both uppercase  
and lowercase alphabets are possible.  
Important: Your device can only support one  
antivirus application. Having more than one application  
with antivirus functionality could affect performance and  
operation or cause the device to stop functioning.  
You can also lock the device remotely by sending a text  
message to the device. To enable remote locking and to  
define the text for the message, select Menu > Tools >  
Settings > General > Security > Phone and SIM  
card > Allow remote lock > Yes. Enter the remote lock  
message and confirm the message. The message must be  
at least 5 characters long.  
Lock the device  
Important: If the device has been locked, enter the  
lock code to activate the phone function. When the device  
is locked, calls may be possible to the official emergency  
number. Making an emergency call in the offline profile or  
when the device is locked requires that the device  
recognize the number to be an official emergency number.  
It is advisable to change the profile or unlock the device  
by entering the lock code before you make the emergency  
call.  
Memory card security  
Select Menu > Tools > Memory.  
You can protect a memory card with a password to prevent  
unauthorised access. To set a password, select Options >  
Set password. The password can be up to 8 characters  
long and is case-sensitive. The password is stored in your  
device. You do not need to enter it again while you use the  
memory card on the same device. If you use the memory  
card on another device, you are asked for the password.  
Not all memory cards support password protection.  
To prevent access to the contents of your device, lock the  
device in the standby mode. Press the power key, select  
Lock phone, and enter your lock code. The default lock  
code is 12345. To unlock, press the left selection key, enter  
your lock code, and press the scroll key.  
98  
         
To remove the memory card password, select Options >  
Remove password. When you remove the password, the  
data on the memory card is not protected against  
unauthorised use.  
or edit your fixed dialling contacts. Contact your service  
provider if you do not have the code. To cancel the  
service, select Options > Deactivate fixed dialling.  
Tip: To send textmessages to the SIM contactswhile  
the fixed dialling service is active, you need to add  
the text message centre number to the fixed dialling  
list.  
To open a locked memory card, select Options > Unlock  
memory card. Enter the password.  
If you cannot recall the password to unlock a locked  
memory card, you may reformat the card, in which case  
the card is unlocked and password removed. Formatting  
a memory card destroys all data stored on the card.  
Certificate manager  
Select Menu > Tools > Settings > General >  
Security > Certificate management.  
Fixed dialling  
Digital certificates are used to verify the origins of  
software but do not guarantee safety. There are three  
different types of certificates: authority certificates,  
personal certificates, and server certificates. During a  
secure connection, a server may send a server certificate  
to your device. Upon receipt, it is checked through an  
authority certificate stored on your device. You receive  
notification if the identity of the server is not authentic or  
if you do not have the correct certificate in your device.  
Select Menu > Contacts > Options > SIM contacts >  
Fixed dial contacts.  
With the fixed dialling service, you can restrict calls from  
your device to certain phone numbers. Not all SIM cards  
support the fixed dialling service. Contact your service  
provider for more information.  
When fixed dialing is activated, calls may be possible to  
the official emergency number programmed into your  
device.  
Download a certificate from a web site, or receive a  
certificate as an e-mail attachment, or as a message sent  
through a Bluetooth or infrared connection. Certificates  
should be used when you connect to an online bank or a  
remote server to transfer confidential information. They  
should also be used if you wantto reduce the risk ofviruses  
or other malicious software, and to check the authenticity  
of software when you download and install software to  
your device.  
1. To restrict calls from your device, select Options >  
New SIM contact and enter the contact name and  
phone number to the list of numbers to which calls are  
allowed, or select Add from Contacts to copy the  
contact from Contacts. To restrict calls by a country  
prefix, enter the country prefix in the list of numbers.  
All phone numbers to which calls are allowed must  
start with this country prefix.  
Tip: When you add a new certificate, check its  
99  
2. Select Options > Activate fixed dialling. You need  
authenticity.  
your PIN2 code to activate and deactivate fixed dialling  
     
even if the certificate should be valid, check that the  
current date and time in your device are correct.  
View certificate details  
You can only be sure of the correct identity of a server  
when the signature and the validity period of a server  
certificate have been checked.  
To change the trust settings, select a certificate and  
Options > Trust settings. Select an application field and  
press the scroll key to select Yes or No. You cannot change  
the trust settings of a personal certificate.  
To view certificate details, select View details.  
One of the following notes may appear:  
Depending on the certificate, a list of applications that can  
use the certificate is displayed:  
Certificate not trusted — You have not set any  
application to use the certificate. You may want to  
change the trust settings.  
Symbian installation — New Symbian operating  
system application.  
Expired certificate — The period of validity has ended  
for the selected certificate.  
Internet — E-mail and graphics.  
App. installation — New Java™ application.  
Online certif. check — Online certificate status  
protocol.  
Certificate not valid yet — The period of validity has  
not yet begun for the selected certificate.  
Certificate corrupted — The certificate cannot be  
used. Contact the certificate issuer.  
Security modules  
Certificate trust settings  
Select Menu > Tools > Settings > General >  
Security > Security module.  
Trusting a certificate means that you authorise it to verify  
web pages, e-mail servers, software packages, and other  
data. Only trusted certificates can be used to verify services  
and software.  
View and edit security  
modules  
Important: Even if the use of certificates makes the  
risks involved in remote connections and software  
installation considerably smaller, they must be used  
correctly in order to benefit from increased security. The  
existence of a certificate does not offer any protection by  
itself; the certificate manager must contain correct,  
authentic, or trusted certificates for increased security to  
be available. Certificates have a restricted lifetime. If  
"Expired certificate" or "Certificate not valid yet" is shown,  
To view or edit a security module, scroll to it, and press the  
scroll key.  
To view detailed information about a security module,  
select Options > Security details.  
To edit the PIN codes for the security module, select  
Module PIN to edit the PIN code for the security module  
or Signing PIN to edit the PIN code for digital signatures.  
100  
             
You may not be able to change these codes for all security connection and other settings used by different  
modules.  
applications in your device. The available options may  
vary.  
The key store contains the contents of the security module.  
To delete the key store, select Key store, select the desired  
key store, and Options > Delete. You may not be able to  
delete the key store of all security modules.  
The remote configuration connection is usually started by  
the server when the device settings need to be updated.  
To create a new server profile, select Options > New  
server profile.  
You may receive these settings from your service provider  
Back up data  
in a configuration message. If not, define the following:  
Server name — Enter a name for the configuration  
server.  
It is recommended to back up device memory regularly to  
the memory card or a compatible computer.  
Server ID — Enter the unique ID to identify the  
configuration server.  
To back up information from the device memory to a  
memory card, select Menu > Tools > Memory >  
Options > Back up phone memory.  
Server password — Enter a password to identify your  
device to the server.  
To restore information from the memory card to the  
device memory, select Menu > Tools > Memory >  
Options > Restore from card.  
Session mode — Select the preferred connection type.  
Access point — Select the access point to use for the  
connection, or create a new access point. You can also  
choose to be asked for the access point every time you  
start a connection.  
You can also connect your device to a compatible  
computer and use Nokia PC Suite to back up data.  
Host address — Enter the web address of the  
configuration server.  
Port — Enter the port number of the server.  
User name — Enter your user ID for the configuration  
server.  
Remote configuration  
Select Menu > Tools > Device mgr..  
Password — Enter your password for the  
configuration server.  
With Device manager, you can manage settings, data, and  
software on your device remotely.  
Allow configuration — Select Yes to allow the server  
to initiate a configuration session.  
You can connect to a server, and receive configuration  
settings for your device. You may receive server profiles  
and different configuration settings from your service  
providers or company information management  
department. Configuration settings may include  
Auto-accept all requests — Select Yes if you do not  
want the server to ask for your confirmation when it  
initiates a configuration session.  
101  
       
Network authentication — Select whether to use  
http authentication. This setting is available only if you  
have selected internet as the bearer type.  
During the installation, the device checks the integrity of  
the package to be installed. The device shows information  
about the checks being carried out, and you are given  
options to continue or cancel the installation.  
Network user name — Enter your user ID for the http  
authentication. This setting is available only if you have  
selected internet as the bearer type.  
If you install applications that require a network  
connection, note that the power consumption of your  
device may increase when you use these applications.  
Network password — Enter your password for the  
http authentication. This setting is available only if you  
have selected internet as the bearer type.  
Tip: When browsing web pages, you can download  
an installation file and install it immediately. Note,  
however, that the connection runs in the  
background during the installation.  
To connect to the server and receive configuration settings  
for your device, select Options > Start configuration.  
To view the configuration log of the selected profile, select  
Options > View log.  
Install applications  
Important: Only install and use applications and  
other software from trusted sources, such as applications  
that are Symbian Signed or have passed the Java  
Application manager  
Select Menu > Installations > App. mgr..  
TM  
You can install two types of applications and software on  
Verified testing.  
your device:  
To download and install software from the web, select  
Download applications. Select the application and  
Options > Install.  
Applications and software specifically intended for your  
device or compatible with the Symbian operating  
system. These software installation files have the  
extension .sis or .sisx.  
To view the details of an installed software package, select  
the application and Options > View details.  
J2ME™ applications compatible with the Symbian  
operating system. The Java application installation file  
extensions are .jad or .jar.  
To view the installation log, select Options > View log.  
A list shows what software has been installed and  
removed, and the date of the installation or removal. If  
you encounter problems with the device after installing a  
software package, use this list to find out which software  
package may be the cause of the problem. The information  
in this list may also help you pinpoint problems that are  
Installation files may be transferred to your device from a  
compatible computer, downloaded during browsing, or  
sent to you in a multimedia message, as an e-mail  
attachment, or with Bluetooth.  
102  
     
caused by software packages that are incompatible with  
each other.  
Java security settings  
To specify security settings for a Java application, select  
To remove software, select Options > Remove. If you  
remove software, you can only reinstall it by using the  
original software package file, or by restoring a full backup  
that contains the removed software package. If you  
remove a software package, you may no longer be able to  
open files created with that software. If another software  
package depends on the software package that you  
removed, the other software package may stop working.  
Refer to the documentation of the installed software  
package for details.  
Options > Settings.  
You can define which functions the Java application can  
access. The value that you can set for each functionality  
depends on the protection domain of the software  
package.  
Access point — Select an access point that the  
application may use when making network  
connections.  
Network access — Allow the application to create a  
data connection to the network.  
Messaging — Allow the application to send messages.  
Application auto-start — Allow the application to  
start automatically.  
Installation settings  
To modify the installation settings, select Options >  
Connectivity — Allow the application to activate adata  
connection, such as a Bluetooth connection.  
Multimedia — Allow the application to use the  
multimedia features of your device.  
Settings and from the following:  
Delete — The software package installation file is  
deleted from the device after the installation. If you  
download software packages using the Web browser,  
this may help reduce the amount of storage space  
required. If you want to store the software package file  
for possible reinstallation, do not select this option, or  
make sure that you have a copy of the software package  
file stored on a compatible computer or on a CD-ROM.  
Select language: — If the software package contains  
several language versions of the software, select the  
language version that you want to install.  
Read user data — Allow the application to read your  
calendar entries, contacts, or any other personal data.  
Edit user data — Allow the application to add personal  
data, such as entries to Contacts.  
Positioning — Allow the application to use the  
location data in your device.  
Landmarks — Allow the application to use the  
landmarks in your device.  
You can define how you are prompted to confirm the Java  
application's access to the device functions. Select one of  
the following values:  
Type — Specify what kind of applications you want  
installed. You may choose to install only applications  
with validated certificates. This setting applies only to  
Symbian operating system applications (.sis or .sisx  
files).  
103  
       
Ask every time — Require the Java application to ask  
for your confirmation each time it uses the  
functionality.  
If your device has OMA DRM protected content, to back up  
both the activation keys and the content, use the backup  
feature of Nokia PC Suite. Other transfer methods may not  
transfer the activation keys which need to be restored  
with the content for you to be able to continue the use of  
OMA DRM protected content after the device memory is  
formatted. You may also need to restore the activation  
keys in case the files on your device get corrupted.  
Ask first time — Require the Java application to ask for  
initial confirmation to use the functionality.  
Always allowed — Allow the Java application to use  
the functionality without your confirmation. The  
security settings help protect your device against  
harmful Java applications that may use the functions of  
your device without your permission. Only select  
Always allowed if you know the supplier and  
trustworthiness of the application.  
If your device has WMDRM protected content, both the  
activation keys and the content will be lost if the device  
memory is formatted. You may also lose the activation  
keys and the content in case the files on your device get  
corrupted. Losing the activation keys or the content may  
limit your ability to use the same content on your device  
again. For more information, contact your service  
provider.  
Not allowed — Prevent the Java application from  
using the functionality.  
Activation keys  
Some activation keys may be connected to a specific SIM  
card, and the protected content can be accessed only if the  
SIM card is inserted in the device.  
Select Menu > Tools > Actv. keys.  
Some media files, such as images, music, or video clips, are  
protected by digital usage rights. The activation keys for  
such files may allow or restrict their usage. For example,  
with some activation keys you may listen to a music track  
only a limited number of times. During one playback  
session you may rewind, fast-forward, or pause the track,  
but once you stop it, you have used one of the instances  
allowed.  
To view your activation keys by type, select Valid keys,  
Invalid keys, or Not in use.  
To view the key details, select Options > Key details.  
The following details are displayed for each media file:  
Status — The status is Activation key is valid,  
Activation key expired, or Activation key not yet  
valid.  
Content sending Allowed means that you can send  
the file to another device. Not allowed means that you  
cannot send the file to another device.  
Use activation keys  
Digital rights management (DRM) protected content  
comes with an associated activation key that defines your  
rights to use the content.  
Content in phone Yes means that the file is in the  
device and the path of the file is displayed. No means  
that the related file is not currently in the device.  
104  
     
To activate a key, go to the Activation keys main view, and can synchronise may vary. Contact your service provider  
select Invalid keys > Options > Get activation key.  
Establish a network connection at the prompt, and you are  
directed to a web site where you can purchase rights to  
the media.  
To remove file rights, open the valid keys tab or the keys  
not in use tab, scroll to the desired file, and select  
Options > Delete. If there are several rights related to  
the same media file, all the rights are deleted.  
for more information.  
Create a synchronisation  
profile  
There is a Nokia PC Suite synchronisation profile available  
in your device. You do not need to edit it if you synchronise  
your device with a computer using Nokia PC Suite.  
The group key view displays all of the files related to a  
group right. If you have downloaded multiple media files  
with the same rights, they are all displayed in this view.  
You can open the group view from either the valid keys or  
invalid keys tabs. To access these files, open the group  
rights folder.  
To create a new profile, select Options > New sync  
profile and assign a name for the profile, select the  
applications to synchronise with the profile, and specify  
the needed connection settings. Contact your service  
provider for details.  
Select applications to  
synchronise  
Data synchronisation  
Select Menu > Tools > Sync.  
1. To select the applications to synchronise with a  
synchronisation profile, select Options > Edit sync  
profile > Applications.  
With Sync, you can synchronise your contacts, calendar  
entries, notes, or mailboxes with corresponding  
applications on a compatible computer or remote internet  
server. Your synchronisation settings are saved in a  
synchronisation profile. The Sync application uses SyncML  
technology for remote synchronisation. For information  
on SyncML compatibility, contact the supplier of the  
applications with which you want to synchronise your  
device.  
2. Select the desired application, and select Include in  
sync > Yes.  
3. Specify the Remote database and Synchronisation  
type settings.  
You may receive the synchronisationsettingsasamessage  
105  
from your service provider. The available applications you  
         
Yes. Enter your network user name and network  
Synchronisation connection  
settings  
password.  
To define the connection settings of a new profile, select  
New sync profile > Connection settings and define the  
following settings:  
Download!  
Select Menu > Download!.  
Server version — Select the SyncML version you can  
With Download! (network service), you can browse,  
download, and install items, such as latest applications  
and related documents, to your device from the web.  
use with the remote server.  
Server ID — Enter the server ID of the remote server.  
This setting is only available if you select 1.2 as the  
SyncML version.  
The items are categorised under catalogs and folders  
provided by Nokia or independent service providers. Some  
items may be chargeable, but you can usually preview  
them free of charge.  
Data bearer — Select the data bearer to connect to the  
remote server during synchronisation.  
Access point — Select the access point to use for the  
synchronisation connection, or create a new access  
point. You can also choose to be asked for the access  
point every time you start synchronising.  
Host address — Enter the web address of the server  
that contains the database with which you want to  
synchronise your device.  
Download! uses your network services to access the most  
updated content. For information on additional items  
available through Download!, contact your service  
provider, or the supplier or manufacturer of the item.  
Only install and use applications and other software from  
sources that offer adequate security and protection  
against harmful software.  
Port — Enter the port number of the remote database  
server.  
User name — Enter your user name to identify your  
device to the server.  
Select catalogs, folders, and  
items  
Password — Enter your password to identify your  
device to the server.  
Allow sync requests — To allow synchronisation to  
start from the remote database server, select Yes.  
Accept all sync requests — To have your device ask  
for your confirmation before accepting synchronisation  
from the server, select No.  
To update the Download! content, select Options >  
Refresh list.  
To hide a folder or a catalog from the list, for example, to  
view only items that you use frequently, select Options >  
Hide. To make the items visible again, select Options >  
Show all.  
Network authentication — To authenticate your  
device to the network before synchronisation, select  
106  
         
To buy the selected item, select Options > Buy. A  
submenu opens, where you can select the version of the  
item and view price information.  
You may be able to request these updates through the  
Nokia Software Updater PC application. To update the  
device software, you need the Nokia Software Updater  
application and a compatible PC with Microsoft Windows  
2000, XP, or Vista operating system, broadband internet  
access, and a compatible data cable to connect your device  
to the PC.  
To download an item that is free of charge, select  
Options > Get.  
To view the details of the selected item, select Options >  
View details.  
To get more information and to download the Nokia  
Software Updater application, visit www.nokia.com/  
softwareupdate or your local Nokia website.  
To return to the Download! main level, select Options >  
Homepage.  
Tip: To check the software version in your device,  
The available options may vary depending on your service  
provider, the selected item, and the view you are in.  
enter *#0000# in the standby mode.  
Download! settings  
To change the Download! settings, select Options >  
Settings and from the following:  
Access point — Select an access point to use to connect  
to the service provider's server.  
Automatic open — Select whether you want the  
downloaded item or application to open automatically  
after the download is completed.  
Preview confirmation — Select whether you want a  
confirmation query to be shown before previewing an  
item.  
Buy confirmation — Select whether you want a  
confirmation query to be shown before buying an item.  
Software updates  
Nokia may produce software updates that may offer new  
features, enhanced functions, or improved performance.  
107  
       
Settings  
Select Menu > Tools > Settings.  
Factory settings — Restore the original settings of the  
device.  
You can define and modify various settings of your device.  
Modifying these settings affects the operation of your  
device across several applications.  
Positioning — Define the positioning method and  
server for GPS-based applications.  
Some settings may be preset for the device or sent to you  
in a special message by your service provider. You may not  
be able to change such settings.  
Personalisation settings  
Select Menu > Tools > Settings > General >  
Select the setting you want to edit to do the following:  
Personalisation.  
Switch between two values, such as on or off.  
Select a value from a list.  
Display settings  
To define the level of light that the device needs before  
switching on the backlight, select Display > Light  
sensor.  
Open a text editor to enter a value.  
Open a slider to decrease or increase the value by  
scrolling left or right.  
To change the text size, select Display > Font size.  
To adjust the length of time the display can be left idle  
before the screen saver is activated, select Display >  
Power saver time-out.  
General settings  
Select Menu > Tools > Settings > General.  
To select a welcome note or logo for the display, select  
Display > Welcome note / logo. You can either choose  
the default welcome note, enter your own text, or select  
an image.  
Select from the following:  
Personalisation — Change the display settings and  
personalise the device.  
Date and time — Change the date and time.  
Enhancement — Define the settings for your  
enhancements.  
To set how quickly the display dims after the last keypress,  
select Display > Light time-out.  
108  
Security — Define the security settings.  
         
To set the various alert tones, select Tones > Message  
alert tone, E-mail alert tone, Calendar alarm tone, or  
Clock alarm tone.  
Standby mode settings  
Standby mode > Active standby.  
To select whether to use the active standby, select  
To set the device to vibrate when you receive a call, select  
To assign shortcuts for the scroll key and selection keys,  
select Standby mode > Shortcuts. These shortcuts are  
not available in the active standby.  
Tones > Vibrating alert.  
To set the volume level of the device keypad tones, select  
Tones > Keypad tones.  
To assign shortcuts to applications, select Standby  
To set the warning tones on or off, select Tones >  
mode > Standby apps.  
Warning tones.  
To select whether to show or hide the operator logo, select  
Standby mode > Operator logo > On or Off.  
Language settings  
To select the Inbox or the mailbox that is shown in the  
active standby, select Standby mode > Active standby  
mailbox.  
To set the language used on the device display, select  
Language > Phone language.  
To select the language in which you write notes and  
To select the plug-ins that are shown in the active standby,  
select Standby mode > Active standby plug-ins. You  
can, for example, see how many voice mails you have. The  
available plug-ins may vary.  
messages, select Language > Writing language.  
To select whether to use the predictive text input, select  
Language > Predictive text.  
Notification light  
Tone settings  
Ringing tone.  
You can set the notification light on the cover of your  
device to blink when you have received a new message or  
when you have missed a phone call.  
To select a ringing tone for voice calls, select Tones >  
To select a ringing tone for video calls, select Tones >  
To set the length of time you want the notification light  
Video call tone.  
to blink, select Notification light > Blink light for.  
To set the ringing type, select Tones > Ringing type. You  
can also set the device to sound a ringing tone that is a  
combination of the spoken name of the caller and the  
selected ringing tone, when someone from your contacts  
list calls you. Select Tones > Say caller's name.  
To select of which events you want to be notified, select  
Notification light > Notified events.  
Date and time settings  
To set the volume level of the ringing tone, select Tones >  
109  
Select Menu > Tools > Settings > General > Dateand  
Ringing volume.  
time.  
                   
To set the current date and time, select Date and Time.  
Beep once or Silent in the selected profile, the automatic  
answer is disabled.  
To define your time zone, select Time zone.  
To illuminate the device while it is attached to an  
To update the time, date, and time zone information  
automatically (network service), select Network  
operator time > Auto-update.  
enhancement, select Lights > On.  
To select whether to use the 12-hour or 24-hour clock  
system and with which symbol to separate hours and  
minutes, select Time format and Time separator.  
Security settings  
Select Menu > Tools > Settings > General >  
Security.  
To determine the date format and separator, select Date  
Define the following security settings:  
format and Date separator.  
Phone and SIM card — Adjust the security settings for  
To define the clock type, select Clock type > Analogue  
your device and SIM card.  
or Digital.  
Certificate management — Manage your security  
certificates.  
To select the tone for the alarm clock, select Clock alarm  
Security module — Manage your security module.  
tone.  
Avoid using codes that are similar to emergency numbers  
to prevent accidental dialling of the emergency number.  
Codes are shown as asterisks. When you change a code,  
enter the current code, then the new code twice.  
To determine the week days that are work days for you,  
select Workdays.  
Enhancement settings  
Device and SIM card security  
Select Menu > Tools > Settings > General >  
To change the PIN code, select Phone and SIM card >  
PIN code. The new code must be 4 to 8 digits long. The  
PIN code protects your SIM card against unauthorised use  
and is provided with the SIM card. After three consecutive  
incorrect PIN code entries, the code is blocked, and you  
need to use the PUK code to unblock it before you can use  
the SIM card again.  
Enhancement.  
Common enhancement settings  
With most enhancements, you can do the following:  
To determine which profile is activated when you attach  
an enhancement to your device, select Default profile.  
To set the keypad to lock automatically after a defined  
period, select Phone and SIM card > Keypad autolock  
period.  
To let the device answer phone calls automatically after 5  
seconds when an enhancement is attached, select  
Automatic answer > On. If the ringing type is set to  
110  
           
To set a time-out after which the device is automatically  
locked and can be used only if the correct lock code is  
entered, select Phone and SIM card > Phone autolock  
period. Enter a number for the time-out in minutes, or  
select None to set off the autolock period. Whenthedevice  
is locked, you can still answer incoming calls, and calls may  
programmed into your device.  
Select from the following:  
Call — Define general call settings.  
Call divert — Define your call divert settings. See "Call  
divert", p. 36.  
Call barring — Define your call barring settings. See  
"Call barring", p. 37.  
Network — Adjust the network settings.  
To set a new lock code, select Phone and SIM card > Lock  
code. The preset lock code is 12345. Enter the current code  
and then the new code twice. The new code can be 4-255  
characters long. Both alphabets and digits can be used,  
and both uppercase and lowercase alphabets are possible.  
The device notifies you if the lock code is not properly  
formatted.  
To set the device to ask for the lock code when an  
unknown, new SIM card is inserted into your device, select  
Phone and SIM card > Lock if SIM card changed. The  
device maintains a list of SIM cards that are recognised as  
the owners cards.  
Call settings  
To display your phone number to the person you are  
calling, select Call > Send my caller ID > Yes. To let the  
network determine whether your caller ID is sent, select  
Set by network.  
To display your net call address to the person you are  
calling using a net call, select Call > Send my internet  
call ID > Yes.  
To be notified of a new incoming call while you have a call  
in progress, select Call > Call waiting > Options >  
Activate. To check if the function is active on the network,  
select Options > Check status.  
To select whether net calls alert or not, select Call >  
Internet call alert. You are notified of missed net calls  
with a notification.  
To set the default call type, select Call > Default call  
type and select Voice call if you make a GSM calls, or  
Internet call if you make net calls.  
Restore original settings  
To restore the original device settings, select Factory  
settings. To do this, you need your device lock code. After  
resetting, the device may take a longer time to power on.  
Documents, contact information, calendar entries, and  
files are unaffected.  
To send a text message automatically to the person who  
is calling you informing why you cannot answer the  
incoming call, select Call > Reject call with SMS > Yes.  
To set the text for the message, select Call > Message  
text.  
Telephone settings  
111  
Select Menu > Tools > Settings > Phone.  
         
SIP settings — View or create session initiation  
protocol (SIP) profiles.  
Select Menu > Tools > Settings > Phone >  
Internet tel. — Define settings for net calls.  
Configurations — View and delete trusted servers  
from which your device may receive configuration  
settings.  
Network.  
To select the network mode, select Network mode and  
Dual mode, UMTS, or GSM. In the dual mode, the device  
switches automatically between networks.  
APN control — Restrict packet data connections. See  
"Restrict packet data", p. 117.  
To select the operator, select Operator selection and  
Manual to choose from available networks, or  
Automatic to have the device select the network  
automatically.  
Access points  
Select Menu > Tools > Settings > Connection >  
To set the device to indicate when it is used in Micro  
Access points.  
Cellular Network (MCN), select Cell info display > On.  
An internet access point is a collection of settings, which  
define how the device creates a data connection to the  
network. To use e-mail and multimedia services or to  
browse web pages, you must first define access points for  
these services.  
Connection settings  
Select Menu > Tools > Settings > Connection.  
Some or all access points may be preset for your device by  
your service provider, and you may not be able to create,  
edit, or remove them.  
To create a new access point, select Options > New  
access point or select an existing access point from the  
list and then Options > Duplicate access point to use  
the access point as a basis for the new one.  
Select from the following:  
Bluetooth — Edit the Bluetooth settings. See "Send  
and receive data with Bluetooth", p. 90.  
USB — Edit the data cable settings. See "Data  
cable", p. 88.  
Access points — Set up new or edit existing access  
points. Some or all access points may be preset for your  
device by your service provider, and you may not be  
able to create, edit, or remove them.  
Packet data (GPRS) settings  
Packet data — Determine when packet data  
connections are used, and enter the access point if you  
use your device as a modem for a computer.  
Wireless LAN — Determine if the device displays an  
indicator when a WLAN is available, and how often the  
device searches for networks.  
Select Menu > Tools > Settings > Connection >  
Packet data.  
Your device supports packet data connections, such as  
GPRS in the GSM network. When you are using your device  
112  
             
in GSM and UMTS networks, it is possible to have multiple  
data connections active at the same time; access points  
can share a data connection, and data connections remain  
active, for example, during voice calls. See "Connection  
manager", p. 97.  
Advanced WLAN settings  
Select Options > Advanced settings. The advanced  
WLAN settings are normally defined automatically, and  
changing them is not recommended.  
To edit the settings manually, select Automatic  
To define the packet data settings, select Packet data  
connection and select When available to register the  
device to the packet data network when you switch the  
device on in a supported network, or When needed to  
establish a packet data connection only when an  
application or action requires it. Select Access point and  
enter the access point name provided by your service  
provider to use the device as a packet data modem to your  
computer. To use a high-speed data connection, select  
High speed packet access > Enabled.  
configuration > Disabled, and define the following:  
Long retry limit — Enter the maximum number of  
transmission attempts if the device does not receive a  
receiving acknowledgement signal from the network.  
Short retry limit — Enter the maximum number of  
transmission attempts if the device does not receive a  
clear-to-send signal from the network.  
RTS threshold — Select the data packet size at which  
the WLAN access point device issues a request to send  
before sending the packet.  
These settings affect all access points for packet data  
connections.  
TX power level — Select the power level of your device  
when sending data.  
Radio measurements — Enable or disable the radio  
measurements.  
WLAN settings  
Power saving — Select whether to use the WLAN  
power saving mechanism to save the power in the  
device battery. Using the power saving mechanism  
enhances the battery performance but may weaken  
WLAN interoperability.  
Select Menu > Tools > Settings > Connection >  
Wireless LAN.  
To have an indicator displayed when there is a WLAN  
available in your current location, select Show WLAN  
availability > Yes.  
To restore all settings to their original values, select  
To select the interval for your device to scan for available  
WLANs and update the indicator, select Scan for  
networks. This setting is not available unless you select  
Show WLAN availability > Yes.  
Options > Restore defaults.  
WLAN security settings  
Select Menu > Tools > Settings > Connection >  
Access points > Options > New access point, or select  
an access point and Options > Edit.  
113  
           
In the access point settings, select WLAN security mode  
802.1x security settings  
and the desired mode.  
Select 802.1x as the WLAN security mode.  
802.1x authenticates and authorises devices to access a  
wireless network, and prevents access if the authorisation  
process fails.  
WEP security settings  
Select WEP as the WLAN security mode.  
Select WLAN security settings and from the following:  
The wired equivalent privacy (WEP) encryption method  
encrypts data before it is transmitted. Access to the  
network is denied to users who do not have the required  
WEP keys. When the WEP security mode is in use, and your  
device receives a data packet not encrypted with the WEP  
keys, the data is discarded.  
WPA/WPA2 — Select EAP (Extensible Authentication  
Protocol) or Pre-shared key (a secret key used for  
device identification).  
EAP plug-in settings — If you selected WPA/WPA2 >  
EAP, select which EAP plug-ins defined in your device to  
use with the access point.  
In an ad-hoc network, all devices must use the same WEP  
Pre-shared key — If you selected WPA/WPA2 > Pre-  
shared key, enter the shared private key that identifies  
your device to the WLAN to which you connect.  
key.  
Select WLAN security settings and from the following:  
WEP key in use — Select the desired WEP key.  
Authentication type — Select Open or Shared.  
WEP key settings — Edit the settings for the WEP key.  
WPA security settings  
Select WPA/WPA2 as the WLAN security mode.  
Select WLAN security settings and from the following:  
WEP key settings  
WPA/WPA2 — Select EAP (Extensible Authentication  
Protocol) or Pre-shared key (a secret key used for  
device identification).  
In an ad-hoc network, all devices must use the same WEP  
key.  
Select WLAN security settings > WEP key settings and  
EAP plug-in settings — If you select WPA/WPA2 >  
EAP, select which EAP plug-ins defined in your device to  
use with the access point.  
from the following:  
WEP encryption — Select the desired WEP encryption  
key length.  
Pre-shared key — If you select WPA/WPA2 > Pre-  
shared key, enter the shared private key that identifies  
your device to the WLAN to which you connect.  
WEP key format — Select whether you want to enter  
the WEP key data in ASCII or Hexadecimal format.  
WEP key — Enter the WEP key data.  
114  
               
WPA2 only mode — To allow both TKIP and AES  
(Advanced Encryption Standard) encryption, select Off.  
To allow AES only, select On  
To change the priority of the EAP plug-in settings, select  
Options > Raise priority to attempt to use the plug-in  
before other plug-ins when connecting to the network  
with the access point, or Options > Lower priority to  
use this plug-in for network authentication after  
attempting to use other plug-ins.  
Wireless LAN plugins  
See the device help for more information on EAP plugins.  
Select Menu > Tools > Settings > Connection >  
Access points.  
The EAP (extensible authentication protocol) plug-ins are  
used in wireless networks to authenticate wireless devices  
and authentication servers, and the different EAP plug-ins  
make possible the use of various EAP methods (network  
service).  
Session initiation protocol  
(SIP) settings  
Select Menu > Tools > Settings > Connection > SIP  
settings.  
You can view the EAP plug-ins currently installed in your  
Session initiation protocols (SIP) are used for creating,  
modifying, and terminating certain types of  
device (network service).  
communication sessions with one or more participants  
(network service). Typical communication sessions are  
video sharing and net calls. SIP profiles include settings for  
these sessions. The SIP profile used by default for a  
communication session is underlined.  
EAP plug-ins  
1. To define the EAP plug-in settings, select Options >  
New access point and define an access point that uses  
WLAN as a data bearer.  
2. Select 802.1x or WPA/WPA2 as the security mode.  
To create a SIP profile, select Options > New SIP  
3. Select WLAN security settings > WPA/WPA2 >  
profile > Use default profile or Use existing profile.  
EAP > EAP plug-in settings.  
To select the SIP profile you want to use by default for  
communication sessions, select Options > Default  
profile.  
Use EAP plug-ins  
To use an EAP plug-in when you connect to a WLAN using  
the access point, select the desired plug-in and Options >  
Enable. The EAP plug-ins enabled for use with this access  
point have a check mark next to them. To not use a plug-  
in, select Options > Disable.  
Edit SIP profiles  
Select Options > Edit, and select from the following:  
Profile name — Enter a name for the SIP profile.  
To edit the EAP plug-in settings, select Options > Edit.  
115  
Service profile — Select IETF or Nokia 3GPP.  
                 
Default access point — Select the access point to use  
for the internet connection.  
Edit registration servers  
Select Options > New SIP profile or Edit > Registrar  
Public user name — Enter your user name received  
from your service provider.  
server.  
Use compression — Select if compression is used.  
Registration — Select the registration mode.  
Use security — Select if security negotiation is used.  
Proxy server — Enter the proxy server settings for this  
SIP profile.  
Select from the following:  
Registrar server address — Enter the host name or IP  
address of the registrar server in use.  
Realm — Enter the registrar server realm.  
User name and Password — Enter your user name and  
password for the registrar server.  
Registrar server — Enter the registration server  
settings for this SIP profile.  
Transport type — Select UDP, Auto, or TCP.  
Port — Enter the port number of the registrar server.  
Edit SIP proxy servers  
Select Options > New SIP profile or Edit > Proxy  
Net call settings  
server.  
Select Menu > Tools > Settings > Connection >  
Proxy servers are intermediate servers between a  
browsing service and its users used by some service  
providers. These servers may provide additional security  
and speed up access to the service.  
Internet tel..  
To create a new net call profile, select Options > New  
profile.  
To edit an existing profile, select Options > Edit.  
Select from the following:  
Proxy server address — Enter the host name or IP  
address of the proxy server in use.  
Configuration settings  
Realm — Enter the proxy server realm.  
User name and Password — Enter your user name and  
password for the proxy server.  
Select Menu > Tools > Settings > Connection >  
Configurations.  
Allow loose routing — Select if loose routing is  
allowed.  
You can receive messages from your service provider or  
company information management containing  
configuration settings for trusted servers. These settings  
are automatically saved in Configurations. You may  
receive configuration settings for access points,  
multimedia, or e-mail services, and IM or synchronisation  
settings from trusted servers.  
Transport type — Select UDP, Auto, or TCP.  
Port — Enter the port number of the proxy server.  
116  
               
To delete configurations for a trusted server, select  
Options > Delete. The configuration settings for other  
applications provided by this server are also deleted.  
Restrict packet data  
Select Menu > Tools > Settings > Connection > APN  
control.  
With the access point control service, you can restrict  
packet data connections from your device to certain access  
points only. Your SIM card may not support the access  
point control service. Contact your service provider for  
more information.  
To restrict the packet data connections from your device,  
select Options > Activate restrictions. You need your  
PIN2 code to activate and deactivate access point control  
or to edit the packet data access points on the control list.  
To add access points that can be used for packet data  
connections to the control list, select Options > Add  
name manually. To enable connections to an operator-  
provided access point, create an empty access point.  
To remove access points from the list, select Options >  
Remove.  
Application settings  
Select Menu > Tools > Settings > Applications.  
Select an application from the list to adjust its settings.  
117  
       
Shortcuts  
Here are some of the available keyboard shortcuts in your  
device. Shortcuts can make the use of the applications  
more efficient.  
Number key (2– Call a phone number using speed  
9)  
dialling. You must first activate speed  
dialling at Menu > Tools >  
Settings > Phone > Call > Speed  
dialling > On.  
General shortcuts  
Web  
General shortcuts  
*
Zoom in the page.  
Zoom out the page.  
Open the search dialog.  
View the active pages.  
View the page overview.  
Power key  
Press and hold to switch your device  
#
2
5
8
9
on and off.  
Press once to switch between profiles.  
Active standby mode  
Left selection key Lock and unlock the keypad.  
+ *  
Call key  
Open the dialog for entering a new  
web address.  
Open the call log.  
0
Open the bookmarks folder.  
0
Press and hold to open your home  
page in the Web browser.  
Image viewer  
#
1
Press and hold to switch between the  
Call key  
0
5
Send the image.  
Zoom out.  
Zoom in.  
Silent and General profiles.  
Press and hold to call your voice  
mailbox.  
118  
     
7
Zoom in. Press twice for the full screen  
size.  
4
6
2
8
3
1
*
Scroll left in the zoomed image.  
Scroll right in the zoomed image.  
Scroll up in the zoomed image.  
Scroll down in the zoomed image.  
Rotate clockwise.  
Rotate counterclockwise.  
Switch between the full screen size  
and normal view.  
119  
Glossary  
Glossary  
DTMF tones  
Dual Tone Multi-Frequency tones. The  
DTMF system is used by touch-tone  
telephones. DTMF assigns a specific  
frequency, or tone, to each key so that it  
can easily be identified by a  
3G  
3rd generation mobile communications.  
A digital system for mobile  
communications which aims at global  
use and provides increased bandwidth.  
3G lets a mobile device user access a wide  
variety of services, such as multimedia.  
microprocessor. DTMF tones allow you to  
communicate with voice mailboxes,  
computerised telephony systems, and so  
on.  
Ad-hoc  
operating  
mode  
A WLAN network mode where two or  
more devices connect to each other using  
WLAN directly without a WLAN access  
point.  
EAP  
Extensible authentication protocol. EAP  
plug-ins are used in wireless networks to  
authenticate wireless devices and  
authentication servers.  
Enhanced GPRS. EGPRS is similar to GPRS,  
but it enables faster connection. For more  
information on the availability of EGPRS  
and data transfer speed, contact your  
service provider.  
Cookies  
Cookies are little pieces of information,  
given by the server to you, to store  
information about your visits to a web  
site. When you accept cookies, the server  
is able to evaluate your use of the web  
site, what you are interested in, what you  
want to read, and so on.  
EGPRS  
DNS  
Domain name service. An internet service  
that translates domain names such as  
www.nokia.com into IP addresses such  
as 192.100.124.195. Domain names are  
easier to remember but this translation is  
needed because the internet is based on  
IP addresses.  
120  
 
GPRS  
General packet radio service. GPRS  
enables wireless access for mobile  
phones to data networks (network  
service). GPRS uses packet data  
IMAP4  
Internet mail access protocol, version 4. A  
protocol used for accessing your remote  
mailbox.  
An access point is where your device  
Internet  
technology where information is sent in  
short bursts of data over the mobile  
network. The benefit of sending data in  
packets is that the network is occupied  
only when sending or receiving data. As  
GPRS uses the network efficiently, it  
allows for quick data connection setup  
and fast data transmission speeds.  
access point connects to a network. To use e-mail and  
multimedia services or to connect to the  
internet and browse web pages, you  
must first define internet access points  
for these services.  
Infrastructure A WLAN network mode where devices are  
operating  
mode  
connected to WLAN using a WLAN access  
point.  
You must subscribe to the GPRS service.  
For availability and subscription to GPRS,  
contact your service provider.  
PIN  
Personal identity number. The PIN code  
protects your device from unauthorised  
use. The PIN code is supplied with the SIM  
card. If the PIN code request is selected,  
the code is required each time the device  
is switched on. The PIN code must be 4 to  
8 digits long.  
The PIN2 code is supplied with some SIM  
cards. The PIN2 code is required to access  
certain functions supported by the SIM  
card. The length of the PIN2 code is 4 to  
8 digits.  
During a voice call, you cannot establish  
a GPRS connection, and any existing GPRS  
connection is put on hold unless the  
network supports dual transfer mode.  
GPS  
Global positioning system. GPS is a  
worldwide radio navigation system.  
PIN2  
POP3  
HSDPA  
High-speed downlink packet access.  
HSDPA brings high-speed data delivery to  
3G terminals, ensuring that users  
requiring effective multimedia  
capabilities benefit from data rates  
previously unavailable because of  
limitations in the radio access network.  
Post office protocol, version 3. A common  
mail protocol that can be used for  
accessing your remote mailbox.  
HTTP  
Hypertext transfer protocol. A document  
PUK and PUK2 PIN Unblocking Key. PUK and PUK2 codes  
are required to change a blocked PIN code  
or PIN2 code, respectively. The length of  
the code is 8 digits.  
transfer protocol used in the web.  
121  
HTTPS  
HTTP over a secure connection.  
SIP  
Session initiation protocol. SIP is used for  
creating, modifying, and terminating  
certain types of communication sessions  
with one or more participants.  
USSD  
A service request, such as request to  
activate an application or configure  
various settings remotely, that you can  
send to your operator or service provider  
with your device.  
Voice over internet protocol technology.  
VoIP is a set of protocols that facilitate  
phone calls over an IP network, such as  
the internet.  
Virtual private network. VPN creates a  
secure connection to compatible  
corporate intranet and services, such as  
e-mail.  
Wireless application protocol. WAP is an  
international standard for wireless  
communication.  
command  
SSID  
Service set identifier. SSID is the name  
that identifies the specific WLAN.  
VoIP  
VPN  
Streaming  
Streaming audio and video files means  
playing them directly from the web  
without downloading them first to your  
device.  
UMTS  
Universal mobile telecommunications  
system. UMTS is a 3G mobile  
communication system. Besides voice  
and data, UMTS enables audio and video  
delivery to wireless devices.  
WAP  
WEP  
When you use your device in GSM and  
UMTS networks, multiple data  
Wired equivalent privacy. WEP is an  
encryption method that encrypts data  
before it is transmitted in WLAN.  
Wireless local area network.  
connections can be active at the same  
time, and access points can share a data  
connection. In the UMTS network, data  
connections remain active during voice  
calls. You can, for example, browse the  
web faster than previously possible while  
simultaneously speaking on the phone.  
WLAN  
WPA  
Wi-Fi Protected Access. Security method  
for WLAN.  
WPA2  
Wi-Fi Protected Access 2. Security method  
for WLAN.  
UPIN  
UPUK  
PIN code used in UMTS network.  
UPIN Unblocking Key. UPUK code is  
required to change a blocked UPIN code  
or PIN2 code. The length of the code is 8  
digits.  
122  
USIM  
SIM card used in UMTS network.  
Troubleshooting  
To see frequently asked questions about your device, visit  
the product support pages at the Nokia web site.  
Q: Why can’t I find my friend’s device while  
using Bluetooth connectivity?  
Q: What is my lock, PIN, or PUK code?  
A: Check that both devices are compatible, have activated  
Bluetooth connectivity, and are not in the hidden mode.  
Check also that the distance between the two devices is  
not over 10 metres (33 feet) and that there are no walls or  
other obstructions between the devices.  
A: The default lock code is 12345. If you forget or lose the  
lock code, contact your device dealer. If you forget or lose  
a PIN or PUK code, or if you have not received such a code,  
contact your network service provider.  
Q: Why can’t I end a Bluetooth connection?  
Q: How do I close an application that is not  
responding?  
A: If another device is connected to your device, you can  
end the connection using the other device or by  
deactivating Bluetooth connectivity. Select Menu >  
Connectivity > Bluetooth > Bluetooth > Off.  
A: Press and hold the home key. Scroll to the application,  
and press the backspace key to close the application.  
Q: Why do images look smudgy?  
Q: Why can't I see a WLAN access point even  
A: Ensure that the camera lens protection windows are  
though I know I'm within its range?  
clean.  
A: Check that the Offline profile is not in use in your device.  
Q: Why do missing, discoloured, or bright dots  
appear on the screen every time I switch on my  
device?  
The WLAN access point may use a hidden service set  
identifier (SSID). You can only access networks that use a  
hidden SSID if you know the correct SSID, and have created  
a WLAN access point for the network on your Nokia device  
A: This is a characteristic of this type of display. Some  
displays may contain pixels or dots that remain on or off.  
This is normal, not a fault.  
Check that the WLAN access point is not on channels 12-13,  
as they cannot be associated with.  
123  
   
Q: How do I switch WLAN off on my Nokia  
device?  
Q: Why do I have problems with the security  
mode?  
A: The WLAN on your Nokia device switches off when you  
A: Check that you have configured the security mode  
are not trying to connect, not connected to another access correctly, and that it is the same that the network uses. To  
point, or not scanning for available networks. To further  
reduce battery consumption, you can specify that your  
Nokia device does not scan, or scans less often, for  
available networks in the background. WLAN switches off  
in between background scans.  
check the security mode the network uses, select Menu >  
Connectivity > Conn. mgr. > Active data  
connections > Options > Details.  
Check also the following: you have the correct WPA mode  
(preshared key or EAP), youhave disabled all EAP typesthat  
are not needed, and all the EAP type settings are correct  
To stop the background scans, select Menu > Tools >  
Settings > Connection > Wireless LAN > Show WLAN (passwords, user names, certificates).  
availability > Never. You can still manually scan for  
Q: Why can’t I select a contact for my message?  
available WLAN networks and connect to WLAN networks  
A: The contact card does not have a phone number, an  
address, or an e-mail address. Select Menu > Contacts,  
and edit the contact card.  
as usual.  
To increase the background scan interval, select Show  
WLAN availability > Yes, and define the interval in Scan  
for networks.  
Q: The note Retrieving message is shown  
briefly. What is happening?  
Q: Why can't I browse the web even though the  
WLAN connection is working and the IP settings  
are correct?  
A: The device is trying to retrieve a multimedia message  
from the multimedia messaging centre. Thisnote is shown  
if you have set Multimedia retrieval to Always  
A: Check that you have defined the HTTP/ HTTPS proxy  
settings correctly in the advanced settings of your WLAN  
access point.  
automatic in the multimedia message settings. Check  
that the settings for multimedia messaging are defined  
correctly and that there are no mistakes in phone numbers  
or addresses. See "Multimedia message settings", p. 58.  
Q: How do I check the signal quality of my WLAN  
connection?  
Q: How can I end the data connection when the  
device starts a data connection again and  
again?  
Select Menu > Connectivity > Conn. mgr. > Active  
data connections > Options > Details. If the signal  
quality is weak or moderate, you may encounter  
A: The device may be trying to retrieve a multimedia  
message from the multimedia message centre. To stop the  
device from making a data connection, select Menu >  
Messaging > Options > Settings > Multimedia  
connection problems. Try again closer to the access point.  
124  
message > Multimedia retrieval > Manual to have the  
multimedia messaging centre save messages to be  
retrieved later, or Off to ignore all incoming multimedia  
messages. If you select Manual, you receive a notification  
when there is a new multimedia message that you can  
retrieve in the multimedia message centre. If you select  
Off, the device does not make any network connections  
related to multimedia messaging.  
Set the device to use a packet data connection only if  
you start an application or action that needs it. Select  
Menu > Tools > Settings > Connection > Packet  
data > Packet data connection > When needed.  
Prevent the device from automatically downloading  
new maps in the Maps application. Select Menu >  
Tools > Maps > Options > Settings > Network >  
Use network > Off.  
To set the device to use a packet data connection only if  
you start an application or action that needs it, select  
Menu > Tools > Settings > Connection > Packet  
data > Packet data connection > When needed.  
Change the time-out after which the backlight is  
switched off. Select Menu > Tools > Settings >  
General > Personalisation > Display > Light time-  
out.  
If this does not help, switch the device off, and switch it  
Close the applications you do not use. Press and hold  
the home key. Scroll to the application, and press the  
backspace key to close the application.  
on again.  
Q: Why do I have problems connecting the  
device to my PC?  
A: Ensure that you have the latest version of Nokia PC Suite  
and that it is installed and running on your compatible PC.  
For further information on how to use Nokia PC Suite, see  
the help function on Nokia PC Suite or visit the support  
pages of the Nokia web site.  
Q: How do I save battery power?  
A: Many features in your device increase the demand on  
battery power and reduce the battery life time. To save  
battery power, do the following:  
Switch off Bluetooth when you do not need it.  
Stop the background scans for WLAN. Select Menu >  
Tools > Settings > Connection > Wireless LAN >  
Show WLAN availability > Never. You can still  
manually scan for available WLAN networks and  
connect to WLAN networks as usual.  
125  
Battery information  
Do not short-circuit the battery. Accidental short-circuiting  
can occur when a metallic object such as a coin, clip, or pen  
causes direct connection of the positive (+) and negative  
(-) terminals of the battery. (These look like metal strips  
on the battery.) This might happen, for example, when you  
carry a spare battery in your pocket or purse. Short-  
circuiting the terminals may damage the battery or the  
connecting object.  
Charging and  
discharging  
Your device is powered by a rechargeable battery. The  
battery can be charged and discharged hundreds of times,  
but it will eventually wear out. When the talk and standby  
times are noticeably shorter than normal, replace the  
battery. Use only Nokia approved batteries, and recharge  
your battery only with Nokia approved chargers  
designated for this device.  
Leaving the battery in hot or cold places, such as in a closed  
car in summer or winter conditions, will reduce the  
capacity and lifetime of the battery. Always try to keep the  
battery between 15°C and 25°C (59°F and 77°F). A device  
with a hot or cold battery may not work temporarily, even  
when the battery is fully charged. Battery performance is  
particularly limited in temperatures well below freezing.  
If a replacement battery is being used for the first time or  
if the battery has not been used for a prolonged period, it  
may be necessary to connect the charger, then disconnect  
and reconnect it to begin charging the battery.  
Do not dispose of batteries in a fire as they may explode.  
Batteries may also explode if damaged. Dispose of  
batteries according to local regulations. Please recycle  
when possible. Do not dispose as household waste.  
Unplug the charger from the electrical plug and the device  
when not in use. Do not leave a fully charged battery  
connected to a charger, since overcharging may shorten  
its lifetime. If left unused, a fully charged battery will lose  
its charge over time.  
Do not dismantle or shred cells or batteries. In the event  
of a battery leak, do not allow the liquid to come in contact  
with the skin or eyes. In the event of such a leak, flush your  
skin or eyes immediately with water, or seek medical help.  
If the battery is completely discharged, it may take several  
minutes before the charging indicator appears on the  
display or before any calls can be made.  
Use the battery only for its intended purpose. Never use  
any charger or battery that is damaged.  
126  
   
2. When you angle the hologram  
left, right, down and up, you  
should see 1, 2, 3 and 4 dots on  
each side respectively.  
Nokia battery  
authentication  
guidelines  
Always use original Nokia batteries for your safety. To  
check that you are getting an original Nokia battery,  
purchase it from an authorised Nokia dealer, and inspect  
the hologram label using the following steps:  
What if your battery is not  
authentic?  
Successful completion of the steps is not a total assurance  
of the authenticity of the battery. If you have any reason  
to believe that your battery is not an authentic, original  
Nokia battery, you should refrain from using it, and take  
it to the nearest authorised Nokia service point or dealer  
for assistance. Your authorised Nokia service point or  
dealer will inspect the battery for authenticity. If  
authenticity cannot be verified, return the battery to the  
place of purchase.  
If you cannot confirm that your Nokia battery with the  
hologramon the labelis an authentic Nokia battery, please  
do not use the battery. Take it to the nearest authorised  
Nokia service point or dealer for assistance. The use of a  
battery that is not approved by the manufacturer may be  
dangerous and may result in poor performance and  
damage to your device and its enhancements. It may also  
invalidate any approval or warranty applying to the  
device.  
To find out more about original Nokia batteries, visit  
Authenticate hologram  
www.nokia.com/battery.  
1. When you look at the hologram  
on the label, you should see the  
Nokia connecting hands symbol  
from one angle and the Nokia  
Original Enhancements logo  
when looking from another angle.  
127  
     
Care and maintenance  
Your device is a product of superior design and  
craftsmanship and should be treated with care. The  
following suggestions will help you protect your warranty  
coverage.  
Do not paint the device. Paint can clog the moving parts  
and prevent proper operation.  
Use a soft, clean, dry cloth to clean any lenses, such as  
camera, proximity sensor, and light sensor lenses.  
Keep the device dry. Precipitation, humidity, and all  
types of liquids or moisture can contain minerals that  
will corrode electronic circuits. If your device does get  
wet, remove the battery, and allow the device to dry  
completely before replacing it.  
Use only the supplied or an approved replacement  
antenna. Unauthorized antennas, modifications, or  
attachments could damage the device and may violate  
regulations governing radio devices.  
Use chargers indoors.  
Do not use or store the device in dusty, dirty areas. Its  
moving parts and electronic components can be  
damaged.  
Always create a backup of data you want to keep, such  
as contacts and calendar notes.  
To reset the device from time to time for optimum  
performance, power off the device and remove the  
battery.  
Do not store the device in hot areas. High temperatures  
can shorten the life of electronic devices, damage  
batteries, and warp or melt certain plastics.  
These suggestions apply equally to your device, battery,  
charger, or any enhancement. If any device is not working  
properly, take it to the nearest authorized service facility  
for service.  
Do not store the device in cold areas. When the device  
returns to its normal temperature, moisture can form  
inside the device and damage electronic circuit boards.  
Do not attempt to open the device other than as  
instructed in this guide.  
Do not drop, knock, or shake the device. Rough  
handling can break internal circuit boards and fine  
mechanics.  
Disposal  
The crossed-out wheeled-bin symbol on your  
product, literature, or packaging reminds you that in  
the European Union all electrical and electronic  
products, batteries, and accumulators must be taken  
Do not use harsh chemicals, cleaning solvents, or strong  
detergents to clean the device.  
128  
   
to separate collection at the end of their working life. Do  
not dispose of these products as unsorted municipal  
waste.  
Return the products to collection to prevent possible harm  
to the environment or human health from uncontrolled  
waste disposal and to promote the sustainable reuse of  
material resources. Collection information is available  
from the product retailer, local waste authorities, national  
producer responsibility organizations, or your local Nokia  
representative. For more information, see product Eco-  
Declaration or country-specific information at  
www.nokia.com.  
129  
Additional safety information  
Small children  
Medical devices  
Your device and its enhancements may contain small  
parts. Keep them out of the reach of small children.  
Operation of any radio transmitting equipment, including  
wireless phones, may interfere with the functionality of  
inadequately protected medical devices. Consult a  
physician or the manufacturer of the medical device to  
determine if they are adequately shielded from external  
RF energy or if you have any questions. Switch off your  
device in health care facilities when any regulations  
posted in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that could  
be sensitive to external RF energy.  
Operating environment  
This device meets RF exposure guidelines when used  
either in the normal use position against the ear or when  
positioned at least 2.2 centimeters (7/8 inches) away from  
the body. When a carry case, belt clip, or holder is used for  
body-worn operation, it should not contain metal and  
should position the device the above-stated distance from  
your body.  
Implanted medical devices  
To transmit data files or messages, this device requires a  
quality connection to the network. In some cases,  
transmission of data files or messages may be delayed  
until such a connection is available. Ensure the above  
separation distance instructions are followed until the  
transmission is completed.  
Manufacturers of medical devices recommend that a  
minimum separation of 15.3 centimeters (6 inches) should  
be maintained between a wireless device and an  
implanted medical device, such as a pacemaker or  
implanted cardioverter defibrillator, to avoid potential  
interference with the medical device. Persons who have  
such devices should:  
Parts of the device are magnetic. Metallic materials may  
be attracted to the device. Do not place credit cards or  
other magnetic storage media near the device, because  
information stored on them may be erased.  
Always keep the wireless device more than 15.3  
centimeters (6 inches) from the medical device when  
the wireless device is turned on.  
130  
Not carry the wireless device in a breast pocket.  
       
Hold the wireless device to the ear opposite the medical compartment as the device, its parts, or enhancements.  
device to minimize the potential for interference.  
For vehicles equipped with an air bag, remember that air  
bags inflate with great force. Do not place objects,  
including installed or portable wireless equipment in the  
area over the air bag or in the air bag deployment area. If  
in-vehicle wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
Turn the wireless device off immediately if there is any  
reason to suspect that interference is taking place.  
Read and follow the directions from the manufacturer  
of their implanted medical device.  
If you have any questions about using your wireless device  
with an implanted medical device, consult your health  
care provider.  
Using your device while flying in aircraft is prohibited.  
Switch off your device before boarding an aircraft. The use  
of wireless teledevices in an aircraft may be dangerous to  
the operation of the aircraft, disrupt the wireless  
telephone network, and may be illegal.  
Hearing aids  
Some digital wireless devices may interfere with some  
hearing aids. If interference occurs, consult your service  
provider.  
Potentially explosive  
environments  
Switch off your device when in any area with a potentially  
explosive atmosphere, and obey all signs and instructions.  
Potentially explosive atmospheres include areas where  
you would normally be advised to turn off your vehicle  
engine. Sparks in such areas could cause an explosion or  
fire resulting in bodily injury or even death. Switch off the  
device at refuelling points such as near gas pumps at  
service stations. Observe restrictions on the use of radio  
equipment in fuel depots, storage, and distribution areas;  
chemical plants; or where blasting operations are in  
progress. Areas with a potentially explosive atmosphere  
are often, but not always, clearly marked. They include  
below deck on boats, chemical transfer or storage facilities  
and areas where the air contains chemicals or particles  
such as grain, dust, or metal powders. You should check  
with the manufacturers of vehicles using liquefied  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles such as  
electronic fuel injection systems, electronic antiskid  
(antilock) braking systems, electronic speed control  
systems, and air bag systems. For more information, check  
with the manufacturer, or its representative, of your  
vehicle or any equipment that has been added.  
Only qualified personnel should service the device or  
install the device in a vehicle. Faulty installation or service  
may be dangerous and may invalidate any warranty that  
may apply to the device. Check regularly that all wireless  
device equipment in your vehicle is mounted and  
operating properly. Do not store or carry flammable  
liquids, gases, or explosive materials in the same  
131  
     
petroleum gas (such as propane or butane) to determine  
if this device can be safely used in their vicinity.  
an accident. Do not end the call until given permission to  
do so.  
Emergency calls  
CERTIFICATION  
INFORMATION (SAR)  
Important: Wireless phones, including this device,  
operate using radio signals, wireless networks, landline  
networks, and user-programmed functions. Because of  
this, connections in all conditions cannot be guaranteed.  
You should never rely solely on any wireless device for  
essential communications like medical emergencies.  
This mobile device meets guidelines for exposure to  
radio waves.  
Your mobile device is a radio transmitter and receiver. It  
is designed not to exceed the limits for exposure to radio  
waves recommended by international guidelines. These  
guidelines were developed by the independent scientific  
organization ICNIRP and include safety margins designed  
to assure the protection of all persons, regardless of age  
and health.  
To make an emergency call:  
1. If the device is not on, switch it on. Check for adequate  
signal strength.  
Some networks may require that a valid SIM card is  
properly inserted in the device.  
The exposure guidelines for mobile devices employ a unit  
of measurement known as the Specific Absorption Rate or  
SAR. The SAR limit stated in the ICNIRP guidelines is 2.0  
watts/kilogram (W/kg) averaged over 10 grams of tissue.  
Tests for SAR are conducted using standard operating  
positions with the device transmitting at its highest  
certified power level in all tested frequency bands. The  
actual SAR level of an operating device can be below the  
maximum value because the device is designed to use only  
the power required to reach the network. That amount  
changes depending on a number of factors such as how  
close you are to a network base station. The highest SAR  
value under the ICNIRP guidelines for use of the device at  
the ear is 1.47 W/kg.  
2. Press the end key as many times as needed to clear the  
display and ready the device for calls.  
3. Enter the official emergency number for your present  
location. Emergency numbers vary by location.  
4. Press the call key.  
If certain features are in use, you may first need to turn  
those features off before you can make an emergency call.  
If the device is in the offline or flight profile mode, you may  
need to change the profile to activate the phone function  
before you can make an emergency call. Consult this guide  
or your service provider for more information.  
When making an emergency call, give all the necessary  
information as accurately as possible. Your wireless device  
may be the only means of communication at the scene of  
Use of device accessories and enhancements may result in  
different SAR values. SAR values may vary depending on  
national reporting and testing requirements and the  
132  
 
network band. Additional SAR information may be  
provided under product information at www.nokia.com.  
133  
Index  
autolock period 110  
Calendar  
Symbols/Numerics  
adding received entries 43  
3-D ringing tones 26  
B
creating entries 43  
day view 45  
background image 25  
backing up data 101  
deleting entries 43  
month view 45  
sending entries 43  
settings 46  
A
access points  
creating 112  
to-do view 45  
week view 45  
calendar key 27  
call barring 37  
net calls 37  
inserting 13  
activation keys 104  
Active notes 62  
settings 62  
blogs 47  
Bluetooth  
authorising devices 91  
pairing 91  
active standby 21  
alarm clock 68  
alert tones 109  
altitude calibration 86  
animated screen saver 25  
antennas 30  
call divert 36  
caller ID 111  
passcode 91  
receiving data 90  
security 92  
calls  
answering 32  
sending data 90  
bookmarks 47  
barring net calls 37  
call waiting 111  
caller ID 111  
application settings 117  
applications  
offline 47  
common actions 22  
installing 102  
conference call 33  
fax calls 33  
web 46  
business cards 42  
modifying installations 103  
shortcuts 109  
fixed dialling 42, 99  
making 32  
sending 42  
attachments  
making a call from Log 40  
making a net call 35  
muting the ringing tone 32  
net call alert 111  
PTT 80  
C
e-mail 51  
cable 88  
cache  
multimedia messages 56  
sound clips 56  
emptying 47  
Calculator 63  
audio files  
details 73  
134  
rejecting 32  
sending 73  
 
connectors 15  
contacts  
rejecting with text  
message 111  
E
e-mail  
selecting type 111  
settings 111  
adding thumbnails 41  
copying information 41  
creating 41  
automatic retrieval settings 60  
connecting to mailbox 50  
connection settings 59  
creating folders 52  
deleting 52  
speed dialling 36  
voice commands 39  
voice dialling 39  
voice mail 38  
groups 42  
ringing tones 42  
searching 41  
replying 51  
SIM card contacts 41  
SIM directory 42  
voice tags 41  
retrieval settings 60  
sending 51  
settings 71  
setting up 50  
contacts key 27  
converting  
user settings 59  
writing 51  
remote SIM access 92  
cell broadcast 57  
settings 61  
currencies 66  
e-mail key 27  
EAP  
measurements 66  
currency conversions 66  
customer service 19  
plug-in settings 115  
using an EAP plug-in 115  
ending  
certificates  
details 100  
D
settings 100  
internet connections 47  
network connections 97  
enhancements  
charging the battery 14  
Clock  
date  
settings 109  
destination  
alarms 68  
remote SIM access 92  
settings 110  
settings 68  
removing 86  
setting 86  
world clock 68  
conference calls 33  
configuration messages 116  
Bluetooth 90  
equaliser 74  
Device manager 101  
display  
indicators 17  
feeds 47  
infrared 89  
File manager 63  
files  
modem 96  
catalogs 106  
settings 107  
DTMF tones 37  
downloading 71  
flash files 78  
sending 63  
connections  
ending 97  
GPRS settings 95  
WLAN settings 96  
135  
fixed dialling 42, 99  
free memory 27  
language  
memory card 28  
SIM card 13  
changing 30  
G
installation log 102  
installing  
settings 109  
lock code 98, 110  
locking  
Gallery 71  
applications 102  
internet 46  
GPRS  
device 98  
access point settings 95  
settings 95  
ending connections 47  
device autolock 110  
keypad 17, 110  
Log 40  
internet calls 35  
settings 112  
adding numbers to Contacts 40  
deleting 40  
H
jad files 102  
making a call 40  
sending messages 40  
settings 40  
jar files 102  
headset  
Java applications 102, 103  
connecting 16  
home key 26  
transfer log 23  
logos  
K
HSDPA (high-speed downlink  
packet access) 88  
key store 100  
keyguard 17  
keypad  
operator logo 109  
welcome logo 108  
I
lock settings 110  
locking 17  
IM  
M
application settings 77  
blocking users 77  
groups 76  
mailboxes  
tones 109  
connecting 50  
creating 50  
keys 15  
activation keys 104  
WEP keys 114  
settings 75  
maintenance services 19  
making a call 32  
measurements  
converting 66  
measuring system  
changing 86  
starting a conversation 76  
images  
adding to contacts 72  
display background 72  
rotating 71  
L
landmarks  
sending 72  
categories 87  
creating 86  
editing 86  
receiving 87  
sending 87  
memory 27  
zooming 71  
memory card  
indicators 17  
infrared 89  
backing up data 101  
formatting 28  
inserting 28  
inserting  
136  
battery 13  
locking 98  
pairing  
devices 91  
passcode 91  
microSD 28  
N
passwords 98  
net calls 36  
setting password 28, 63  
unlocking 28  
alert settings 111  
barring 37  
passwords  
menu 21  
memory card password 28, 63  
PC Suite 88  
connecting 35  
message reader 49  
selecting voice 49  
messages 48  
making a call 35  
profiles 35, 116  
settings 116  
PDF reader 67  
personalisation 25  
changing language 109  
display 108  
call rejection messages 111  
cell broadcast settings 61  
service messages 57  
text message settings 58  
Messaging  
settings 112  
standby modes 109  
tones 109  
Nokia Maps 82  
Nokia PC Suite 88  
Nokia support and contact  
information 19  
Nokia Team Suite 64  
action bar settings 65  
editing teams 65  
settings 65  
picture messages  
forwarding 53  
viewing 53  
PIN code  
folders 48, 49  
changing 110  
microSD 28  
playing  
modem 96  
messages 49  
Notes 69  
multimedia messages  
attachments 56  
recordings 75  
notification light 109  
video and audio 72  
positioning  
creating 54  
O
creating presentations 55  
settings 82  
operator  
predictive text input 30, 109  
presentations 55  
printer settings 67  
printing 67  
logo 109  
receiving 55  
selecting 112  
original settings 111  
sending 54  
profiles  
sending options 57  
settings 58  
creating 24  
multitasking 27  
customising 24, 25  
net call profile 35, 116  
selecting ringing tones 24  
PTT  
packet data  
access point settings 95  
advanced access point  
settings 95  
listening to music 73  
music categories 74  
track lists 74  
contacts 80  
restricting 117  
settings 112  
137  
created calls 80  
creating a channel 81  
exiting 81  
in profiles 24  
Calendar 46  
vibrating alert 109  
calls 111  
logging in 80  
making a call 80  
settings 80  
camera 71  
S
cell broadcast 61  
certificate 100  
clock 68  
satellite signal strength 86  
saving  
Q
date 109  
display 108  
Quickoffice 64  
Download! application 107  
e-mail connection 59  
e-mail retrieval 60  
e-mail user 59  
EAP plug-ins 115  
enhancements 110  
GPRS 95, 112  
IM 75  
settings 22  
R
screen saver 25, 108  
searching  
radio  
saved stations 79  
settings 79  
available WLANs 97  
contacts 41  
viewing visual content 79  
RealPlayer  
security  
Java application security 103  
keypad lock 110  
language 109  
Log 40  
Bluetooth 92  
playing media clips 72  
sending files 73  
settings 73  
device and SIM card 110  
Java application 103  
memory card 98  
security module 100  
viewing clip details 73  
recorder  
multimedia messages 58  
net call 116  
playing recordings 75  
recording a sound clip 75  
settings 75  
network 112  
files 22, 63  
Nokia Team Suite 65  
packet data 112  
positioning 82  
printer 67  
using Bluetooth 90  
videos 34  
service commands 57  
service messages 57  
settings 60  
PTT 80  
remote configuration 101  
remote lock 98  
remote synchronisation 105  
repair services 19  
restoring original settings 111  
ringing tones 42, 109  
3-D 26  
radio 79  
session initiation protocol  
See SIP  
RealPlayer 73  
recorder 75  
settings  
restoring 111  
service messages 60  
SIP 115  
Active notes 62  
advanced WLAN 113  
application installations 103  
applications 117  
138  
standby mode 109  
Speech 49  
tones 109  
text messages 58  
time 109  
speed dialling 36  
standby modes  
settings 109  
track lists 74  
tones 109  
traditional text input 29  
Transfer  
voice commands 39  
Web 47  
active standby 21  
basic standby mode 21  
settings 109  
WEP security 114  
WLAN 113  
log 23  
support information 19  
switching device on and off 16  
Symbian applications 102  
synchronisation 24  
transferring data 23  
trip destination 86  
trip meter 86  
Settings wizard 20  
shortcuts 118  
applications 109  
keys 109  
troubleshooting 123  
U
synchronisation profiles 105  
synchronising  
UPIN code  
signal strength 17  
SIM access profile 92  
SIM card  
applications 105  
changing 110  
USB data cable 88  
inserting 13  
V
tabs 22  
text messages 53  
SIM change lock 110  
SIM directory 42  
SIP  
text  
vibrating alert 109  
video calls  
changing size 108  
letter mode 29  
number mode 29  
predictive input 30  
traditional input 29  
text messages  
making a call 33  
switching to voice call 33  
video clips 70  
details 73  
creating profiles 115  
editing profiles 115  
editing proxy servers 116  
editing registration servers 116  
settings 115  
playing 72  
sending 73  
video sharing 34  
receiving invitations 34  
sis files 102  
sending options 53  
settings 58  
sisx files 102  
software packages  
writing 52  
voice commands  
changing profiles 39  
launching an application 39  
settings 39  
themes  
changing 25  
downloading 25  
time  
software update 107  
sound clips  
voice mail  
recording 75  
139  
settings 109  
to-do entries 44  
calling 38  
sending 56  
writing language 30  
changing number 38  
voice over IP 36  
VoIP 36  
Z
volume 26  
Zip manager 66  
W
wallpaper 72  
warning tones 109  
Web  
connection security 46  
settings 47  
weblogs 47  
Welcome application 20  
welcome note 108  
WEP  
keys 114  
security settings 114  
wireless keyboard 69  
WLAN  
802.1x security settings 114  
access point settings 96  
access points 93  
advanced access point  
settings 96  
availability 93  
searching for networks 97  
security settings 113  
settings 113  
WEP keys 114  
WPA security settings 114  
WLAN wizard 93  
world clock 68  
140  
WPA security settings 114  

Star Candle Company VANGUARD 470000 User Manual
Sony Xplod CDX 838 User Manual
Sony USM32U2 User Manual
Seagate FreeAgent Go ST903203FBA2E1 RK User Manual
Seagate Computer Drive ST3500630A User Manual
Seagate BARRACUDA ES SERIAL ATA ST3400620NS User Manual
Samsung Reality SCH u820 User Manual
Salton MECM1 User Manual
Research In Motion Blackberry Cell Phone 43 User Manual
Philips CD163 User Manual